summaryrefslogtreecommitdiffstats
path: root/net/batman-adv/distributed-arp-table.c
Commit message (Collapse)AuthorAgeFilesLines
* batman-adv: Add required includes to all filesSven Eckelmann2015-06-071-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: Use common Jenkins Hash implementationSven Eckelmann2015-06-071-2/+15
| | | | | | | | | | | | | An unoptimized version of the Jenkins one-at-a-time hash function is used and partially copied all over the code wherever an hashtable is used. Instead the optimized version shared between the whole kernel should be used to reduce code duplication and use better optimized code. Only the DAT code must use the old implementation because it is used as distributed hash function which has to be common for all nodes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: update copyright years for 2015Sven Eckelmann2015-05-291-1/+1
| | | | | Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: checkpatch - Please use a blank line after declarationsAntonio Quartulli2015-01-071-0/+1
| | | | | Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: prefer kmalloc_array to kmalloc when possibleAntonio Quartulli2014-08-041-1/+2
| | | | | | | | Reported by checkpatch with the following warning: WARNING: Prefer kmalloc_array over kmalloc with multiply Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* net: add __pskb_copy_fclone and pskb_copy_for_cloneOctavian Purdila2014-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several instances where a pskb_copy or __pskb_copy is immediately followed by an skb_clone. Add a couple of new functions to allow the copy skb to be allocated from the fclone cache and thus speed up subsequent skb_clone calls. Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-241-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: fix local TT check for outgoing arp requests in DATAntonio Quartulli2014-05-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change introduced by 88e48d7b3340ef07b108eb8a8b3813dd093cc7f7 ("batman-adv: make DAT drop ARP requests targeting local clients") implements a check that prevents DAT from using the caching mechanism when the client that is supposed to provide a reply to an arp request is local. However change brought by be1db4f6615b5e6156c807ea8985171c215c2d57 ("batman-adv: make the Distributed ARP Table vlan aware") has not converted the above check into its vlan aware version thus making it useless when the local client is behind a vlan. Fix the behaviour by properly specifying the vlan when checking for a client being local or not. Reported-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* | batman-adv: add blank line between declarations and the rest of the codeAntonio Quartulli2014-05-181-0/+1
|/ | | | | | | | Reported by checkpatch with the following message: "WARNING: Missing a blank line after declarations" Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: prefer ether_addr_copy to memcpyAntonio Quartulli2014-03-221-2/+2
| | | | | | | | On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx pathLinus Lüssing2014-03-221-0/+5
| | | | | | | | | | | | | | | | | | Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of skb->data now, which spares us some ugly type casts. At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request() before sending the skb along the TX path. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: update copyright years for 2014Simon Wunderlich2014-01-121-1/+1
| | | | | | Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: split out router from orig_nodeSimon Wunderlich2014-01-121-1/+2
| | | | | | | | | | | | | | For the network wide multi interface optimization there are different routers for each outgoing interface (outgoing from the OGM perspective, incoming for payload traffic). To reflect this, change the router and associated data to a list of routers. While at it, rename batadv_orig_node_get_router() to batadv_orig_router_get() to follow the new naming scheme. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: send every DHCP packet as bat-unicastAntonio Quartulli2014-01-081-2/+2
| | | | | | | | | | | | | | | | | | | In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: remove parenthesis from return statementsAntonio Quartulli2014-01-081-1/+1
| | | | | | | | Remove parenthesis around return expression as suggested by checkpatch. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli2014-01-081-3/+1
| | | | | | | | | | | | As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: fix header alignment by unrolling batadv_headerSimon Wunderlich2013-12-281-3/+3
| | | | | | | | | | | | The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: refine API calls for unicast transmissions of SKBsLinus Lüssing2013-10-191-5/+5
| | | | | | | | | | | | | | | | | | | With this patch the functions batadv_send_skb_unicast() and batadv_send_skb_unicast_4addr() are further refined into batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send a packet in the unicast forwarding methods and let the callers decide. This is going to be useful for the upcoming multicast related patches in particular. Further, the return values were polished a little to use the more appropriate NET_XMIT_* defines. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: make the Distributed ARP Table vlan awareAntonio Quartulli2013-10-191-48/+105
| | | | | | | | | | | The same IP subnet can be used on different VLANs, therefore DAT has to differentiate whether the IP to resolve belongs to one or the other virtual LAN. To accomplish this task DAT has to deal with the VLAN tag and store it together with each ARP entry. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: add the VLAN ID attribute to the TT entryAntonio Quartulli2013-10-191-4/+7
| | | | | | | | | To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: Remove old fragmentation codeMartin Hundebøll2013-10-121-6/+5
| | | | | | | | | | | | | | | | | | Remove the existing fragmentation code before adding the new version and delete unicast.{h,c}. batadv_unicast_send_skb() is moved to send.c and renamed to batadv_send_skb_unicast(). fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in the new fragmentation code. BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the new fragmentation code. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: tvlv - add distributed arp table containerMarek Lindner2013-10-091-0/+64
| | | | | | | Create DAT container to announce DAT capabilities (if enabled). Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: fix typos in kernel doc & commentsMarek Lindner2013-05-291-43/+39
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: make DAT drop ARP requests targeting local clientsAntonio Quartulli2013-05-091-0/+13
| | | | | | | | | | | | | | In the outgoing ARP request snooping routine in DAT, ARP Request sent by local clients which are supposed to be replied by other local clients can be silently dropped. The destination host will reply by itself through the LAN and therefore there is no need to involve DAT. Reported-by: Carlos Quijano <carlos@crqgestion.es> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Tested-by: Carlos Quijano <carlos@crqgestion.es> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: replace redundant primary_if_get callsMarek Lindner2013-03-131-18/+4
| | | | | | | | | The batadv_priv struct carries a pointer to its own interface struct. Therefore, it is not necessary to retrieve the soft_iface via the primary interface. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* hlist: drop the node parameter from iteratorsSasha Levin2013-02-271-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into netDavid S. Miller2013-02-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | Pull in 'net' to take in the bug fixes that didn't make it into 3.8-final. Also, deal with the semantic conflict of the change made to net/ipv6/xfrm6_policy.c A missing rt6->n neighbour release was added to 'net', but in 'net-next' we no longer cache the neighbour entries in the ipv6 routes so that change is not appropriate there. Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: Fix NULL pointer dereference in DAT hash collision avoidancePau Koning2013-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | An entry in DAT with the hashed position of 0 can cause a NULL pointer dereference when the first entry is checked by batadv_choose_next_candidate. This first candidate automatically has the max value of 0 and the max_orig_node of NULL. Not checking max_orig_node for NULL in batadv_is_orig_node_eligible will lead to a NULL pointer dereference when checking for the lowest address. This problem was added in 785ea1144182c341b8b85b0f8180291839d176a8 ("batman-adv: Distributed ARP Table - create DHT helper functions"). Signed-off-by: Pau Koning <paukoning@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-01-291-1/+18
|\| | | | | | | | | | | | | Bring in the 'net' tree so that we can get some ipv4/ipv6 bug fixes that some net-next work will build upon. Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: filter ARP packets with invalid MAC addresses in DATMatthias Schiffer2013-01-271-0/+13
| | | | | | | | | | | | | | | | | | | | | | We never want multicast MAC addresses in the Distributed ARP Table, so it's best to completely ignore ARP packets containing them where we expect unicast addresses. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
| * batman-adv: check for more types of invalid IP addresses in DATMatthias Schiffer2013-01-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | There are more types of IP addresses that may appear in ARP packets that we don't want to process. While some of these should never appear in sane ARP packets, a 0.0.0.0 source is used for duplicate address detection and thus seen quite often. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
| * batman-adv: fix skb leak in batadv_dat_snoop_incoming_arp_reply()Matthias Schiffer2013-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | The callers of batadv_dat_snoop_incoming_arp_reply() assume the skb has been freed when it returns true; fix this by calling kfree_skb before returning as it is done in batadv_dat_snoop_incoming_arp_request(). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* | batman-adv: update copyright yearsAntonio Quartulli2013-01-191-1/+1
|/ | | | | Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: Add get_ethtool_stats() support for DATMartin Hundebøll2012-11-071-2/+17
| | | | | | | Added additional counters for D.A.T. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: Distributed ARP Table - add runtime switchAntonio Quartulli2012-11-071-0/+18
| | | | | | | This patch adds a runtime switch that enables the user to turn the DAT feature on or off at runtime Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: Distributed ARP Table - add snooping functions for ARP messagesAntonio Quartulli2012-11-071-0/+265
| | | | | | | | | | | | | In case of an ARP message going in or out the soft_iface, it is intercepted and a special action is performed. In particular the DHT helper functions previously implemented are used to store all the ARP entries belonging to the network in order to provide a fast and unicast lookup instead of the classic broadcast flooding mechanism. Each node stores the entries it is responsible for (following the DHT rules) in its soft_iface ARP table. This makes it possible to reuse the kernel data structures and functions for ARP management. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: Distributed ARP Table - add ARP parsing functionsAntonio Quartulli2012-11-071-0/+202
| | | | | | | ARP messages are now parsed to make it possible to trigger special actions depending on their types (snooping). Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: Distributed ARP Table - implement local storageAntonio Quartulli2012-11-071-0/+296
| | | | | | | | Since batman-adv cannot inter-operate with the host ARP table, this patch introduces a batman-adv private storage for ARP entries exchanged within DAT. This storage will represent the node local cache in the DAT protocol. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: Distributed ARP Table - create DHT helper functionsAntonio Quartulli2012-11-071-0/+270
Add all the relevant functions in order to manage a Distributed Hash Table over the B.A.T.M.A.N.-adv network. It will later be used to store several ARP entries and implement DAT (Distributed ARP Table) Signed-off-by: Antonio Quartulli <ordex@autistici.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-26 06:29:41 +0000