summaryrefslogtreecommitdiffstats
path: root/net/wireless/mlme.c
Commit message (Collapse)AuthorAgeFilesLines
* cfg80211: Use a structure to pass connect response paramsVidyullatha Kanchanapally2017-03-311-8/+12
| | | | | | | | | | | | Currently the connect event from driver takes all the connection response parameters as arguments. With support for new features these response parameters can grow. Use a structure to pass these parameters rather than passing them as function arguments. Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [add to documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Share Channel DFS state across wiphys of same DFS domainVasanthakumar Thiagarajan2017-03-061-0/+10
| | | | | | | | | | | | | | | | | Sharing DFS channel state across multiple wiphys (radios) could be useful with multiple radios on the system. When one radio completes CAC and markes the channel available another radio can use this information and start beaconing without really doing CAC. Whenever there is a state change in dfs channel associated to a particular wiphy the the same state change is propagated to other wiphys having the same DFS reg domain configuration. Also when a new wiphy is created the dfs channel state of other existing wiphys of same DFS domain is copied. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Make pre-CAC results valid only for ETSI domainVasanthakumar Thiagarajan2017-03-061-9/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | DFS requirement for ETSI domain (section 4.7.1.4 in ETSI EN 301 893 V1.8.1) is the only one which explicitly states that once DFS channel is marked as available afer the CAC, this channel will remain in available state even moving to a different operating channel. But the same is not explicitly stated in FCC DFS requirement. Also, Pre-CAC requriements are not explicitly mentioned in FCC requirement. Current implementation in keeping DFS channel in available state is same as described in ETSI domain. For non-ETSI DFS domain, this patch gives a grace period of 2 seconds since the completion of successful CAC before moving the channel's DFS state to 'usable' from 'available' state. The same grace period is checked against the channel's dfs_state_entered timestamp while deciding if a DFS channel is available for operation. There is a new radar event, NL80211_RADAR_PRE_CAC_EXPIRED, reported when DFS channel is moved from available to usable state after the grace period. Also make sure the DFS channel state is reset to usable once the beaconing operation on that channel is brought down (like stop_ap, leave_ibss and leave_mesh) in non-ETSI domain. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Specify the reason for connect timeoutPurushottam Kushwaha2017-01-131-1/+2
| | | | | | | | | | | | This enhances the connect timeout API to also carry the reason for the timeout. These reason codes for the connect time out are represented by enum nl80211_timeout_reason and are passed to user space through a new attribute NL80211_ATTR_TIMEOUT_REASON (u32). Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [keep gfp_t argument last] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Add support for randomizing TA of Public Action framesvamsi krishna2017-01-131-2/+19
| | | | | | | | | | | | | | | | | | | | | Add support to use a random local address (Address 2 = TA in transmit and the same address in receive functionality) for Public Action frames in order to improve privacy of WLAN clients. Applications fill the random transmit address in the frame buffer in the NL80211_CMD_FRAME command. This can be used only with the drivers that indicate support for random local address by setting the new NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA and/or NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED in ext_features. The driver needs to configure receive behavior to accept frames to the specified random address during the time the frame exchange is pending and such frames need to be acknowledged similarly to frames sent to the local permanent address when this random address functionality is not used. Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: NL80211_ATTR_SOCKET_OWNER support for CMD_CONNECTAndrzej Zaborowski2017-01-091-0/+5
| | | | | | | | | | | | | | | Disconnect or deauthenticate when the owning socket is closed if this flag is supplied to CMD_CONNECT or CMD_ASSOCIATE. This may be used to ensure userspace daemon doesn't leave an unmanaged connection behind. In some situations it would be possible to account for that, to some degree, in the deamon restart code or in the up/down scripts without the use of this attribute. But there will be systems where the daemon can go away for varying periods without a warning due to local resource management. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: fix BSS leaks when abandoning assoc attemptsJohannes Berg2016-12-091-0/+12
| | | | | | | | | | | | | | | | | | | When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Rename SAE_DATA to more generic AUTH_DATAJouni Malinen2016-10-271-3/+3
| | | | | | | | | | | | | | | | | This adds defines and nl80211 extensions to allow FILS Authentication to be implemented similarly to SAE. FILS does not need the special rules for the Authentication transaction number and Status code fields, but it does need to add non-IE fields. The previously used NL80211_ATTR_SAE_DATA can be reused for this to avoid having to duplicate that implementation. Rename that attribute to more generic NL80211_ATTR_AUTH_DATA (with backwards compatibility define for NL80211_SAE_DATA). Also document the special rules related to the Authentication transaction number and Status code fiels. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add start / stop NAN commandsAyala Beker2016-09-301-0/+1
| | | | | | | | | | | | | | | | | This allows user space to start/stop NAN interface. A NAN interface is like P2P device in a few aspects: it doesn't have a netdev associated to it. Add the new interface type and prevent operations that can't be executed on NAN interface like scan. Define several attributes that may be configured by user space when starting NAN functionality (master preference and dual band operation) Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: disallow shared key authentication with key index 4Johannes Berg2016-09-131-1/+1
| | | | | | | | Key index 4 can only be used for an IGTK, so the range checks for shared key authentication should treat 4 as an error, fix that in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove enum ieee80211_bandJohannes Berg2016-04-121-1/+1
| | | | | | | | | This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: use to_delayed_workGeliang Tang2016-01-141-2/+1
| | | | | | | Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: allow mgmt_frame_register callback to sleepJohannes Berg2015-07-171-15/+60
| | | | | | | | | | | | | | | This callback is currently not allowed to sleep, which makes it more difficult to implement proper driver methods in mac80211 than it has to be. Instead of doing asynchronous work here in mac80211, make it possible for the callback to sleep by doing some asynchronous work in cfg80211. This also enables improvements to other drivers, like ath6kl, that would like to sleep in this callback. While at it, also fix the code to call the driver on the implicit unregistration when an interface is removed, and do that also when a P2P-Device wdev is destroyed (otherwise we leak the structs.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add bss_type and privacy arguments in cfg80211_get_bss()Dedy Lansky2015-03-031-2/+4
| | | | | | | | | | | | | | | | | | | | 802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: add wmm info to assoc eventEliad Peller2014-09-111-2/+2
| | | | | | | | | | | | | | | Userspace might need to know what queues are configured for uapsd (e.g. for setting proper default values in tspecs). Add this bitmap to the association event (inside wmm nested attribute) Add additional parameter to cfg80211_rx_assoc_resp, and update its callers. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove @gfp parameter from cfg80211_rx_mgmt()Vladimir Kondratiev2014-08-261-2/+2
| | | | | | | | | | | | | | In the cfg80211_rx_mgmt(), parameter @gfp was used for the memory allocation. But, memory get allocated under spin_lock_bh(), this implies atomic context. So, one can't use GFP_KERNEL, only variants with no __GFP_WAIT. Actually, in all occurrences GFP_ATOMIC is used (wil6210 use GFP_KERNEL by mistake), and it should be this way or warning triggered in the memory allocation code. Remove @gfp parameter as no actual choice exist, and use hard coded GFP_ATOMIC for memory allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: change wiphy_to_dev function nameZhao, Gang2014-04-251-12/+12
| | | | | | | | | Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: move interface counting for combination check to mac80211Luciano Coelho2014-04-091-13/+1
| | | | | | | | | | | Move the counting part of the interface combination check from cfg80211 to mac80211. This is needed to simplify locking when the driver has to perform a combination check by itself (eg. with channel-switch). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: DFS get CAC time from regulatory databaseJanusz Dziedzic2014-02-251-1/+1
| | | | | | | | | Send Channel Availability Check time as a parameter of start_radar_detection() callback. Get CAC time from regulatory database. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: consider existing DFS interfacesMichal Kazior2014-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: aggregate mgmt_tx parameters into a structAndrei Otcheretianski2013-12-021-8/+4
| | | | | | | | | | | Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: DFS setup chandef for cac eventJanusz Dziedzic2013-11-251-5/+3
| | | | | | | | | | | | | | To report channel width correctly we have to send correct channel parameters from mac80211 when calling cfg80211_cac_event(). This is required in case of using channel width higher than 20MHz and we have to set correct dfs channel state after CAC (NL80211_DFS_AVAILABLE). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: update dfs_state_entered upon dfs_state changeMichal Kazior2013-10-211-0/+2
| | | | | | | | The timestamp wasn't updated after transitioning to the NL80211_DFS_USABLE state after NOP time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: fix DFS channel recovery timeoutMichal Kazior2013-10-211-2/+2
| | | | | | | | | | | The timeout was not properly converted from msecs to jiffies. As a result channel transition to NL80211_DFS_USABLE was delayed depending on CONFIG_HZ configuration, e.g. HZ=100 would delay the NOP from 30 minutes to 300 minutes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add flags to cfg80211_rx_mgmt()Vladimir Kondratiev2013-08-231-2/+2
| | | | | | | | | | Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: hold BSS over association processJohannes Berg2013-06-191-0/+4
| | | | | | | | | | | This fixes the potential issue that the BSS struct that we use and later assign to wdev->current_bss is removed from the scan list while associating. Also warn when we don't have a BSS struct in connect_result unless it's from a driver that only has the connect() API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: require passing BSS struct back to cfg80211_assoc_timeoutJohannes Berg2013-06-191-3/+5
| | | | | | | | | | | | Doing so will allow us to hold the BSS (not just ref it) over the association process, thus ensuring that it doesn't time out and gets invisible to the user (e.g. in 'iw wlan0 link'.) This also fixes a leak in mac80211 where it doesn't always release the BSS struct properly in all cases where calling this function. This leak was reported by Ben Greear. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: separate internal SME implementationJohannes Berg2013-06-041-131/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The current internal SME implementation in cfg80211 is very mixed up with the MLME handling, which has been causing issues for a long time. There are three things that the implementation has to provide: * a basic SME implementation for nl80211's connect() call (for drivers implementing auth/assoc, which is really just mac80211) and wireless extensions * MLME events for the userspace SME * SME events (connected, disconnected etc.) for all different SME implementation possibilities (driver, cfg80211 and userspace) To achieve these goals it isn't necessary to track the software SME's connection status outside of it's state (which is the part that caused many issues.) Instead, track it only in the SME data (wdev->conn) and in the general case only track whether the wdev is connected or not (via wdev->current_bss.) Also separate the internal implementation to not have callbacks from the SME events, but rather call it from the API functions that the driver (or rather mac80211) calls. This separates the code better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: clean up cfg80211 SME APIsJohannes Berg2013-06-041-32/+54
| | | | | | | | | | | | | | | | | Do some cleanups in the cfg80211 SME APIs, which are only used by mac80211. Most of these functions get a frame passed, and there isn't really any reason to export multiple functions as cfg80211 can check the frame type instead, do that. Additionally, the API functions have confusing names like cfg80211_send_...() which was meant to indicate that it sends an event to userspace, but gets a bit confusing when there's both TX and RX and they're not all clearly labeled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove some locked wrappers from mlme APIJohannes Berg2013-05-251-97/+23
| | | | | | | | | By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: use cfg80211 wdev mutex in mac80211Johannes Berg2013-05-251-40/+8
| | | | | | | | | | | | | | | Using separate locks in cfg80211 and mac80211 has always caused issues, for example having to unlock in places in mac80211 to call cfg80211, which even needed a framework to make cfg80211 calls after some functions returned etc. Additionally, I suspect some issues people have reported with the cfg80211 state getting confused could be due to such issues, when cfg80211 is asking mac80211 to change state but mac80211 is in the process of telling cfg80211 that the state changed (in another way.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: vastly simplify lockingJohannes Berg2013-05-251-6/+6
| | | | | | | | | | | | | | | Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: use C99 initialisers to simplify code a bitJohannes Berg2013-05-161-24/+20
| | | | | | | Use C99 initialisers for the auth, deauth and disassoc requests to simplify the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: introduce critical protocol indication from user-spaceArend van Spriel2013-04-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | Some protocols need a more reliable connection to complete successful in reasonable time. This patch adds a user-space API to indicate the wireless driver that a critical protocol is about to commence and when it is done, using nl80211 primitives NL80211_CMD_CRIT_PROTOCOL_START and NL80211_CRIT_PROTOCOL_STOP. There can be only on critical protocol session started per registered cfg80211 device. The driver can support this by implementing the cfg80211 callbacks .crit_proto_start() and .crit_proto_stop(). Examples of protocols that can benefit from this are DHCP, EAPOL, APIPA. Exactly how the link can/should be made more reliable is up to the driver. Things to consider are avoid scanning, no multi-channel operations, and alter coexistence schemes. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: refactor association parametersJohannes Berg2013-03-061-48/+16
| | | | | | | | cfg80211_mlme_assoc() has grown far too many arguments, make the caller build almost all of the driver struct and pass that to the function instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add ability to override VHT capabilitiesJohannes Berg2013-03-061-3/+32
| | | | | | | | For testing it's sometimes useful to be able to override certain VHT capability advertisement, add the ability to do that in cfg80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: move exported event functions into nl80211Johannes Berg2013-03-061-159/+0
| | | | | | | | | | | | | | | | | | | This is the sort of thing gcc's LTO could do, but since we don't have that yet we can also do it manually. The advantage is reduced code, both source and binary, e.g. on x86-64 text data bss dec hex filename 442825 56230 776 499831 7a077 cfg80211.ko (before) 441585 56230 776 498591 79b9f cfg80211.ko (after) a reduction of ~1k. But in order to not complicate the code move only those functions that are simple wrappers, not those that have functionality of their own. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211/cfg80211: add radar detection command/eventSimon Wunderlich2013-02-151-0/+120
| | | | | | | | | | | | | | | | | Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg2013-02-111-7/+7
| | | | | | | | | This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add SME state to warning in __cfg80211_mlme_disassocJohannes Berg2013-01-291-1/+1
| | | | | | | | | The warning here occasionally triggers but we haven't found the cause yet. It's a valid warning since if it triggers the SME state got confused, so add the SME state to it to help narrow it down in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: move some AP code to right fileJohannes Berg2013-01-031-62/+0
| | | | | | | Some AP code ended up in mlme.c as ap.c didn't exist when it was written, move it now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: pass a channel definition structJohannes Berg2012-11-261-10/+5
| | | | | | | | | | | | | | Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove remain-on-channel channel typeJohannes Berg2012-11-261-15/+6
| | | | | | | | | | | | | | | | | As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'master' of ↵John W. Linville2012-10-231-9/+3
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c net/mac80211/mlme.c
| * cfg80211/mac80211: avoid state mishmash on deauthStanislaw Gruszka2012-10-151-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Avoid situation when we are on associate state in mac80211 and on disassociate state in cfg80211. This can results on crash during modules unload (like showed on this thread: http://marc.info/?t=134373976300001&r=1&w=2) and possibly other problems. Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: add cfg80211 exported function tracingBeni Lev2012-10-181-7/+48
| | | | | | | | | | | | | | | | | | | | Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: add wrappers for registered_device_opsHila Gonen2012-10-181-12/+14
| | | | | | | | | | | | | | | | | | This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: Allow user space to specify non-IEs to SAE AuthenticationJouni Malinen2012-10-171-3/+8
|/ | | | | | | | | | | SAE extends Authentication frames with fields that are not information elements. NL80211_ATTR_IE is not suitable for these, so introduce a new attribute that can be used to specify the fields needed for SAE in station mode. Signed-off-by: Jouni Malinen <j@w1.fi> [change to verify that SAE is only used with authenticate command] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'master' of ↵John W. Linville2012-09-281-0/+11
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/nfc/netlink.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * cfg80211/nl80211: Notify connection request failure in AP modePandiyarajan Pitchaimuthu2012-09-181-0/+11
| | | | | | | | | | | | | | | | | | | | In AP mode, when a station requests connection to an AP and if the request is failed for particular reason, userspace is notified about the failure through NL80211_CMD_CONN_FAILED command. Reason for the failure is sent through the attribute NL80211_ATTR_CONN_FAILED_REASON. Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-26 22:29:11 +0000