From 04debf21fa1741e7d752c37550f7e4816e4067c4 Mon Sep 17 00:00:00 2001 From: Mark Greer Date: Thu, 5 Apr 2018 18:17:20 -0700 Subject: powerpc: Remove core support for Marvell mv64x60 hostbridges There are no longer any platforms that use Marvell's mv64x60 hostbridges so remove the supporting kernel code. CC: Dale Farnsworth Signed-off-by: Mark Greer Signed-off-by: Michael Ellerman --- Documentation/devicetree/bindings/marvell.txt | 516 ------------------------- arch/powerpc/sysdev/Makefile | 3 - arch/powerpc/sysdev/mv64x60.h | 13 - arch/powerpc/sysdev/mv64x60_dev.c | 535 -------------------------- arch/powerpc/sysdev/mv64x60_pci.c | 171 -------- arch/powerpc/sysdev/mv64x60_pic.c | 297 -------------- arch/powerpc/sysdev/mv64x60_udbg.c | 152 -------- 7 files changed, 1687 deletions(-) delete mode 100644 Documentation/devicetree/bindings/marvell.txt delete mode 100644 arch/powerpc/sysdev/mv64x60.h delete mode 100644 arch/powerpc/sysdev/mv64x60_dev.c delete mode 100644 arch/powerpc/sysdev/mv64x60_pci.c delete mode 100644 arch/powerpc/sysdev/mv64x60_pic.c delete mode 100644 arch/powerpc/sysdev/mv64x60_udbg.c diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt deleted file mode 100644 index 7f722316458a3..0000000000000 --- a/Documentation/devicetree/bindings/marvell.txt +++ /dev/null @@ -1,516 +0,0 @@ -Marvell Discovery mv64[345]6x System Controller chips -=========================================================== - -The Marvell mv64[345]60 series of system controller chips contain -many of the peripherals needed to implement a complete computer -system. In this section, we define device tree nodes to describe -the system controller chip itself and each of the peripherals -which it contains. Compatible string values for each node are -prefixed with the string "marvell,", for Marvell Technology Group Ltd. - -1) The /system-controller node - - This node is used to represent the system-controller and must be - present when the system uses a system controller chip. The top-level - system-controller node contains information that is global to all - devices within the system controller chip. The node name begins - with "system-controller" followed by the unit address, which is - the base address of the memory-mapped register set for the system - controller chip. - - Required properties: - - - ranges : Describes the translation of system controller addresses - for memory mapped registers. - - clock-frequency: Contains the main clock frequency for the system - controller chip. - - reg : This property defines the address and size of the - memory-mapped registers contained within the system controller - chip. The address specified in the "reg" property should match - the unit address of the system-controller node. - - #address-cells : Address representation for system controller - devices. This field represents the number of cells needed to - represent the address of the memory-mapped registers of devices - within the system controller chip. - - #size-cells : Size representation for the memory-mapped - registers within the system controller chip. - - #interrupt-cells : Defines the width of cells used to represent - interrupts. - - Optional properties: - - - model : The specific model of the system controller chip. Such - as, "mv64360", "mv64460", or "mv64560". - - compatible : A string identifying the compatibility identifiers - of the system controller chip. - - The system-controller node contains child nodes for each system - controller device that the platform uses. Nodes should not be created - for devices which exist on the system controller chip but are not used - - Example Marvell Discovery mv64360 system-controller node: - - system-controller@f1000000 { /* Marvell Discovery mv64360 */ - #address-cells = <1>; - #size-cells = <1>; - model = "mv64360"; /* Default */ - compatible = "marvell,mv64360"; - clock-frequency = <133333333>; - reg = <0xf1000000 0x10000>; - virtual-reg = <0xf1000000>; - ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ - 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ - 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ - 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ - 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ - - [ child node definitions... ] - } - -2) Child nodes of /system-controller - - a) Marvell Discovery MDIO bus - - The MDIO is a bus to which the PHY devices are connected. For each - device that exists on this bus, a child node should be created. See - the definition of the PHY node below for an example of how to define - a PHY. - - Required properties: - - #address-cells : Should be <1> - - #size-cells : Should be <0> - - compatible : Should be "marvell,mv64360-mdio" - - Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,mv64360-mdio"; - - ethernet-phy@0 { - ...... - }; - }; - - - b) Marvell Discovery ethernet controller - - The Discover ethernet controller is described with two levels - of nodes. The first level describes an ethernet silicon block - and the second level describes up to 3 ethernet nodes within - that block. The reason for the multiple levels is that the - registers for the node are interleaved within a single set - of registers. The "ethernet-block" level describes the - shared register set, and the "ethernet" nodes describe ethernet - port-specific properties. - - Ethernet block node - - Required properties: - - #address-cells : <1> - - #size-cells : <0> - - compatible : "marvell,mv64360-eth-block" - - reg : Offset and length of the register set for this block - - Optional properties: - - clocks : Phandle to the clock control device and gate bit - - Example Discovery Ethernet block node: - ethernet-block@2000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,mv64360-eth-block"; - reg = <0x2000 0x2000>; - ethernet@0 { - ....... - }; - }; - - Ethernet port node - - Required properties: - - compatible : Should be "marvell,mv64360-eth". - - reg : Should be <0>, <1>, or <2>, according to which registers - within the silicon block the device uses. - - interrupts : where a is the interrupt number for the port. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - phy : the phandle for the PHY connected to this ethernet - controller. - - local-mac-address : 6 bytes, MAC address - - Example Discovery Ethernet port node: - ethernet@0 { - compatible = "marvell,mv64360-eth"; - reg = <0>; - interrupts = <32>; - interrupt-parent = <&PIC>; - phy = <&PHY0>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - - - - c) Marvell Discovery PHY nodes - - Required properties: - - interrupts : where a is the interrupt number for this phy. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - reg : The ID number for the phy, usually a small integer - - Example Discovery PHY node: - ethernet-phy@1 { - compatible = "broadcom,bcm5421"; - interrupts = <76>; /* GPP 12 */ - interrupt-parent = <&PIC>; - reg = <1>; - }; - - - d) Marvell Discovery SDMA nodes - - Represent DMA hardware associated with the MPSC (multiprotocol - serial controllers). - - Required properties: - - compatible : "marvell,mv64360-sdma" - - reg : Offset and length of the register set for this device - - interrupts : where a is the interrupt number for the DMA - device. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery SDMA node: - sdma@4000 { - compatible = "marvell,mv64360-sdma"; - reg = <0x4000 0xc18>; - virtual-reg = <0xf1004000>; - interrupts = <36>; - interrupt-parent = <&PIC>; - }; - - - e) Marvell Discovery BRG nodes - - Represent baud rate generator hardware associated with the MPSC - (multiprotocol serial controllers). - - Required properties: - - compatible : "marvell,mv64360-brg" - - reg : Offset and length of the register set for this device - - clock-src : A value from 0 to 15 which selects the clock - source for the baud rate generator. This value corresponds - to the CLKS value in the BRGx configuration register. See - the mv64x60 User's Manual. - - clock-frequence : The frequency (in Hz) of the baud rate - generator's input clock. - - current-speed : The current speed setting (presumably by - firmware) of the baud rate generator. - - Example Discovery BRG node: - brg@b200 { - compatible = "marvell,mv64360-brg"; - reg = <0xb200 0x8>; - clock-src = <8>; - clock-frequency = <133333333>; - current-speed = <9600>; - }; - - - f) Marvell Discovery CUNIT nodes - - Represent the Serial Communications Unit device hardware. - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery CUNIT node: - cunit@f200 { - reg = <0xf200 0x200>; - }; - - - g) Marvell Discovery MPSCROUTING nodes - - Represent the Discovery's MPSC routing hardware - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery CUNIT node: - mpscrouting@b500 { - reg = <0xb400 0xc>; - }; - - - h) Marvell Discovery MPSCINTR nodes - - Represent the Discovery's MPSC DMA interrupt hardware registers - (SDMA cause and mask registers). - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery MPSCINTR node: - mpsintr@b800 { - reg = <0xb800 0x100>; - }; - - - i) Marvell Discovery MPSC nodes - - Represent the Discovery's MPSC (Multiprotocol Serial Controller) - serial port. - - Required properties: - - compatible : "marvell,mv64360-mpsc" - - reg : Offset and length of the register set for this device - - sdma : the phandle for the SDMA node used by this port - - brg : the phandle for the BRG node used by this port - - cunit : the phandle for the CUNIT node used by this port - - mpscrouting : the phandle for the MPSCROUTING node used by this port - - mpscintr : the phandle for the MPSCINTR node used by this port - - cell-index : the hardware index of this cell in the MPSC core - - max_idle : value needed for MPSC CHR3 (Maximum Frame Length) - register - - interrupts : where a is the interrupt number for the MPSC. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery MPSCINTR node: - mpsc@8000 { - compatible = "marvell,mv64360-mpsc"; - reg = <0x8000 0x38>; - virtual-reg = <0xf1008000>; - sdma = <&SDMA0>; - brg = <&BRG0>; - cunit = <&CUNIT>; - mpscrouting = <&MPSCROUTING>; - mpscintr = <&MPSCINTR>; - cell-index = <0>; - max_idle = <40>; - interrupts = <40>; - interrupt-parent = <&PIC>; - }; - - - j) Marvell Discovery Watch Dog Timer nodes - - Represent the Discovery's watchdog timer hardware - - Required properties: - - compatible : "marvell,mv64360-wdt" - - reg : Offset and length of the register set for this device - - Example Discovery Watch Dog Timer node: - wdt@b410 { - compatible = "marvell,mv64360-wdt"; - reg = <0xb410 0x8>; - }; - - - k) Marvell Discovery I2C nodes - - Represent the Discovery's I2C hardware - - Required properties: - - device_type : "i2c" - - compatible : "marvell,mv64360-i2c" - - reg : Offset and length of the register set for this device - - interrupts : where a is the interrupt number for the I2C. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery I2C node: - compatible = "marvell,mv64360-i2c"; - reg = <0xc000 0x20>; - virtual-reg = <0xf100c000>; - interrupts = <37>; - interrupt-parent = <&PIC>; - }; - - - l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes - - Represent the Discovery's PIC hardware - - Required properties: - - #interrupt-cells : <1> - - #address-cells : <0> - - compatible : "marvell,mv64360-pic" - - reg : Offset and length of the register set for this device - - interrupt-controller - - Example Discovery PIC node: - pic { - #interrupt-cells = <1>; - #address-cells = <0>; - compatible = "marvell,mv64360-pic"; - reg = <0x0 0x88>; - interrupt-controller; - }; - - - m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes - - Represent the Discovery's MPP hardware - - Required properties: - - compatible : "marvell,mv64360-mpp" - - reg : Offset and length of the register set for this device - - Example Discovery MPP node: - mpp@f000 { - compatible = "marvell,mv64360-mpp"; - reg = <0xf000 0x10>; - }; - - - n) Marvell Discovery GPP (General Purpose Pins) nodes - - Represent the Discovery's GPP hardware - - Required properties: - - compatible : "marvell,mv64360-gpp" - - reg : Offset and length of the register set for this device - - Example Discovery GPP node: - gpp@f000 { - compatible = "marvell,mv64360-gpp"; - reg = <0xf100 0x20>; - }; - - - o) Marvell Discovery PCI host bridge node - - Represents the Discovery's PCI host bridge device. The properties - for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE - 1275-1994. A typical value for the compatible property is - "marvell,mv64360-pci". - - Example Discovery PCI host bridge node - pci@80000000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "marvell,mv64360-pci"; - reg = <0xcf8 0x8>; - ranges = <0x01000000 0x0 0x0 - 0x88000000 0x0 0x01000000 - 0x02000000 0x0 0x80000000 - 0x80000000 0x0 0x08000000>; - bus-range = <0 255>; - clock-frequency = <66000000>; - interrupt-parent = <&PIC>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0a */ - 0x5000 0 0 1 &PIC 80 - 0x5000 0 0 2 &PIC 81 - 0x5000 0 0 3 &PIC 91 - 0x5000 0 0 4 &PIC 93 - - /* IDSEL 0x0b */ - 0x5800 0 0 1 &PIC 91 - 0x5800 0 0 2 &PIC 93 - 0x5800 0 0 3 &PIC 80 - 0x5800 0 0 4 &PIC 81 - - /* IDSEL 0x0c */ - 0x6000 0 0 1 &PIC 91 - 0x6000 0 0 2 &PIC 93 - 0x6000 0 0 3 &PIC 80 - 0x6000 0 0 4 &PIC 81 - - /* IDSEL 0x0d */ - 0x6800 0 0 1 &PIC 93 - 0x6800 0 0 2 &PIC 80 - 0x6800 0 0 3 &PIC 81 - 0x6800 0 0 4 &PIC 91 - >; - }; - - - p) Marvell Discovery CPU Error nodes - - Represent the Discovery's CPU error handler device. - - Required properties: - - compatible : "marvell,mv64360-cpu-error" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery CPU Error node: - cpu-error@70 { - compatible = "marvell,mv64360-cpu-error"; - reg = <0x70 0x10 0x128 0x28>; - interrupts = <3>; - interrupt-parent = <&PIC>; - }; - - - q) Marvell Discovery SRAM Controller nodes - - Represent the Discovery's SRAM controller device. - - Required properties: - - compatible : "marvell,mv64360-sram-ctrl" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery SRAM Controller node: - sram-ctrl@380 { - compatible = "marvell,mv64360-sram-ctrl"; - reg = <0x380 0x80>; - interrupts = <13>; - interrupt-parent = <&PIC>; - }; - - - r) Marvell Discovery PCI Error Handler nodes - - Represent the Discovery's PCI error handler device. - - Required properties: - - compatible : "marvell,mv64360-pci-error" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery PCI Error Handler node: - pci-error@1d40 { - compatible = "marvell,mv64360-pci-error"; - reg = <0x1d40 0x40 0xc28 0x4>; - interrupts = <12>; - interrupt-parent = <&PIC>; - }; - - - s) Marvell Discovery Memory Controller nodes - - Represent the Discovery's memory controller device. - - Required properties: - - compatible : "marvell,mv64360-mem-ctrl" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery Memory Controller node: - mem-ctrl@1400 { - compatible = "marvell,mv64360-mem-ctrl"; - reg = <0x1400 0x60>; - interrupts = <17>; - interrupt-parent = <&PIC>; - }; - - diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 9861407d644aa..ea2f595b5133d 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -28,9 +28,6 @@ obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o -mv64x60-$(CONFIG_PCI) += mv64x60_pci.o -obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \ - mv64x60_udbg.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o diff --git a/arch/powerpc/sysdev/mv64x60.h b/arch/powerpc/sysdev/mv64x60.h deleted file mode 100644 index 60cfcb90d1fa1..0000000000000 --- a/arch/powerpc/sysdev/mv64x60.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __MV64X60_H__ -#define __MV64X60_H__ - -#include - -extern void __init mv64x60_init_irq(void); -extern unsigned int mv64x60_get_irq(void); - -extern void __init mv64x60_pci_init(void); -extern void __init mv64x60_init_early(void); - -#endif /* __MV64X60_H__ */ diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c deleted file mode 100644 index 185a67e742a61..0000000000000 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ /dev/null @@ -1,535 +0,0 @@ -/* - * Platform device setup for Marvell mv64360/mv64460 host bridges (Discovery) - * - * Author: Dale Farnsworth - * - * 2007 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* These functions provide the necessary setup for the mv64x60 drivers. */ - -static const struct of_device_id of_mv64x60_devices[] __initconst = { - { .compatible = "marvell,mv64306-devctrl", }, - {} -}; - -/* - * Create MPSC platform devices - */ -static int __init mv64x60_mpsc_register_shared_pdev(struct device_node *np) -{ - struct platform_device *pdev; - struct resource r[2]; - struct mpsc_shared_pdata pdata; - const phandle *ph; - struct device_node *mpscrouting, *mpscintr; - int err; - - ph = of_get_property(np, "mpscrouting", NULL); - mpscrouting = of_find_node_by_phandle(*ph); - if (!mpscrouting) - return -ENODEV; - - err = of_address_to_resource(mpscrouting, 0, &r[0]); - of_node_put(mpscrouting); - if (err) - return err; - - ph = of_get_property(np, "mpscintr", NULL); - mpscintr = of_find_node_by_phandle(*ph); - if (!mpscintr) - return -ENODEV; - - err = of_address_to_resource(mpscintr, 0, &r[1]); - of_node_put(mpscintr); - if (err) - return err; - - memset(&pdata, 0, sizeof(pdata)); - - pdev = platform_device_alloc(MPSC_SHARED_NAME, 0); - if (!pdev) - return -ENOMEM; - - err = platform_device_add_resources(pdev, r, 2); - if (err) - goto error; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto error; - - err = platform_device_add(pdev); - if (err) - goto error; - - return 0; - -error: - platform_device_put(pdev); - return err; -} - - -static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id) -{ - struct resource r[5]; - struct mpsc_pdata pdata; - struct platform_device *pdev; - const unsigned int *prop; - const phandle *ph; - struct device_node *sdma, *brg; - int err; - int port_number; - - /* only register the shared platform device the first time through */ - if (id == 0 && (err = mv64x60_mpsc_register_shared_pdev(np))) - return err; - - memset(r, 0, sizeof(r)); - - err = of_address_to_resource(np, 0, &r[0]); - if (err) - return err; - - of_irq_to_resource(np, 0, &r[4]); - - ph = of_get_property(np, "sdma", NULL); - sdma = of_find_node_by_phandle(*ph); - if (!sdma) - return -ENODEV; - - of_irq_to_resource(sdma, 0, &r[3]); - err = of_address_to_resource(sdma, 0, &r[1]); - of_node_put(sdma); - if (err) - return err; - - ph = of_get_property(np, "brg", NULL); - brg = of_find_node_by_phandle(*ph); - if (!brg) - return -ENODEV; - - err = of_address_to_resource(brg, 0, &r[2]); - of_node_put(brg); - if (err) - return err; - - prop = of_get_property(np, "cell-index", NULL); - if (!prop) - return -ENODEV; - port_number = *(int *)prop; - - memset(&pdata, 0, sizeof(pdata)); - - pdata.cache_mgmt = 1; /* All current revs need this set */ - - pdata.max_idle = 40; /* default */ - prop = of_get_property(np, "max_idle", NULL); - if (prop) - pdata.max_idle = *prop; - - prop = of_get_property(brg, "current-speed", NULL); - if (prop) - pdata.default_baud = *prop; - - /* Default is 8 bits, no parity, no flow control */ - pdata.default_bits = 8; - pdata.default_parity = 'n'; - pdata.default_flow = 'n'; - - prop = of_get_property(np, "chr_1", NULL); - if (prop) - pdata.chr_1_val = *prop; - - prop = of_get_property(np, "chr_2", NULL); - if (prop) - pdata.chr_2_val = *prop; - - prop = of_get_property(np, "chr_10", NULL); - if (prop) - pdata.chr_10_val = *prop; - - prop = of_get_property(np, "mpcr", NULL); - if (prop) - pdata.mpcr_val = *prop; - - prop = of_get_property(brg, "bcr", NULL); - if (prop) - pdata.bcr_val = *prop; - - pdata.brg_can_tune = 1; /* All current revs need this set */ - - prop = of_get_property(brg, "clock-src", NULL); - if (prop) - pdata.brg_clk_src = *prop; - - prop = of_get_property(brg, "clock-frequency", NULL); - if (prop) - pdata.brg_clk_freq = *prop; - - pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number); - if (!pdev) - return -ENOMEM; - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - - err = platform_device_add_resources(pdev, r, 5); - if (err) - goto error; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto error; - - err = platform_device_add(pdev); - if (err) - goto error; - - return 0; - -error: - platform_device_put(pdev); - return err; -} - -/* - * Create mv64x60_eth platform devices - */ -static struct platform_device * __init mv64x60_eth_register_shared_pdev( - struct device_node *np, int id) -{ - struct platform_device *pdev; - struct resource r[2]; - int err; - - err = of_address_to_resource(np, 0, &r[0]); - if (err) - return ERR_PTR(err); - - /* register an orion mdio bus driver */ - r[1].start = r[0].start + 0x4; - r[1].end = r[0].start + 0x84 - 1; - r[1].flags = IORESOURCE_MEM; - - if (id == 0) { - pdev = platform_device_register_simple("orion-mdio", -1, &r[1], 1); - if (IS_ERR(pdev)) - return pdev; - } - - pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id, - &r[0], 1); - - return pdev; -} - -static int __init mv64x60_eth_device_setup(struct device_node *np, int id, - struct platform_device *shared_pdev) -{ - struct resource r[1]; - struct mv643xx_eth_platform_data pdata; - struct platform_device *pdev; - struct device_node *phy; - const u8 *mac_addr; - const int *prop; - const phandle *ph; - int err; - - memset(r, 0, sizeof(r)); - of_irq_to_resource(np, 0, &r[0]); - - memset(&pdata, 0, sizeof(pdata)); - - pdata.shared = shared_pdev; - - prop = of_get_property(np, "reg", NULL); - if (!prop) - return -ENODEV; - pdata.port_number = *prop; - - mac_addr = of_get_mac_address(np); - if (mac_addr) - memcpy(pdata.mac_addr, mac_addr, 6); - - prop = of_get_property(np, "speed", NULL); - if (prop) - pdata.speed = *prop; - - prop = of_get_property(np, "tx_queue_size", NULL); - if (prop) - pdata.tx_queue_size = *prop; - - prop = of_get_property(np, "rx_queue_size", NULL); - if (prop) - pdata.rx_queue_size = *prop; - - prop = of_get_property(np, "tx_sram_addr", NULL); - if (prop) - pdata.tx_sram_addr = *prop; - - prop = of_get_property(np, "tx_sram_size", NULL); - if (prop) - pdata.tx_sram_size = *prop; - - prop = of_get_property(np, "rx_sram_addr", NULL); - if (prop) - pdata.rx_sram_addr = *prop; - - prop = of_get_property(np, "rx_sram_size", NULL); - if (prop) - pdata.rx_sram_size = *prop; - - ph = of_get_property(np, "phy", NULL); - if (!ph) - return -ENODEV; - - phy = of_find_node_by_phandle(*ph); - if (phy == NULL) - return -ENODEV; - - prop = of_get_property(phy, "reg", NULL); - if (prop) - pdata.phy_addr = MV643XX_ETH_PHY_ADDR(*prop); - - of_node_put(phy); - - pdev = platform_device_alloc(MV643XX_ETH_NAME, id); - if (!pdev) - return -ENOMEM; - - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - err = platform_device_add_resources(pdev, r, 1); - if (err) - goto error; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto error; - - err = platform_device_add(pdev); - if (err) - goto error; - - return 0; - -error: - platform_device_put(pdev); - return err; -} - -/* - * Create mv64x60_i2c platform devices - */ -static int __init mv64x60_i2c_device_setup(struct device_node *np, int id) -{ - struct resource r[2]; - struct platform_device *pdev; - struct mv64xxx_i2c_pdata pdata; - const unsigned int *prop; - int err; - - memset(r, 0, sizeof(r)); - - err = of_address_to_resource(np, 0, &r[0]); - if (err) - return err; - - of_irq_to_resource(np, 0, &r[1]); - - memset(&pdata, 0, sizeof(pdata)); - - pdata.freq_m = 8; /* default */ - prop = of_get_property(np, "freq_m", NULL); - if (prop) - pdata.freq_m = *prop; - - pdata.freq_n = 3; /* default */ - prop = of_get_property(np, "freq_n", NULL); - if (prop) - pdata.freq_n = *prop; - - pdata.timeout = 1000; /* default: 1 second */ - - pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id); - if (!pdev) - return -ENOMEM; - - err = platform_device_add_resources(pdev, r, 2); - if (err) - goto error; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto error; - - err = platform_device_add(pdev); - if (err) - goto error; - - return 0; - -error: - platform_device_put(pdev); - return err; -} - -/* - * Create mv64x60_wdt platform devices - */ -static int __init mv64x60_wdt_device_setup(struct device_node *np, int id) -{ - struct resource r; - struct platform_device *pdev; - struct mv64x60_wdt_pdata pdata; - const unsigned int *prop; - int err; - - err = of_address_to_resource(np, 0, &r); - if (err) - return err; - - memset(&pdata, 0, sizeof(pdata)); - - pdata.timeout = 10; /* Default: 10 seconds */ - - np = of_get_parent(np); - if (!np) - return -ENODEV; - - prop = of_get_property(np, "clock-frequency", NULL); - of_node_put(np); - if (!prop) - return -ENODEV; - pdata.bus_clk = *prop / 1000000; /* wdt driver wants freq in MHz */ - - pdev = platform_device_alloc(MV64x60_WDT_NAME, id); - if (!pdev) - return -ENOMEM; - - err = platform_device_add_resources(pdev, &r, 1); - if (err) - goto error; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto error; - - err = platform_device_add(pdev); - if (err) - goto error; - - return 0; - -error: - platform_device_put(pdev); - return err; -} - -static int __init mv64x60_device_setup(void) -{ - struct device_node *np, *np2; - struct platform_device *pdev; - int id, id2; - int err; - - id = 0; - for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") { - err = mv64x60_mpsc_device_setup(np, id++); - if (err) - printk(KERN_ERR "Failed to initialize MV64x60 " - "serial device %pOF: error %d.\n", - np, err); - } - - id = 0; - id2 = 0; - for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") { - pdev = mv64x60_eth_register_shared_pdev(np, id++); - if (IS_ERR(pdev)) { - err = PTR_ERR(pdev); - printk(KERN_ERR "Failed to initialize MV64x60 " - "network block %pOF: error %d.\n", - np, err); - continue; - } - for_each_child_of_node(np, np2) { - if (!of_device_is_compatible(np2, - "marvell,mv64360-eth")) - continue; - err = mv64x60_eth_device_setup(np2, id2++, pdev); - if (err) - printk(KERN_ERR "Failed to initialize " - "MV64x60 network device %pOF: " - "error %d.\n", - np2, err); - } - } - - id = 0; - for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c") { - err = mv64x60_i2c_device_setup(np, id++); - if (err) - printk(KERN_ERR "Failed to initialize MV64x60 I2C " - "bus %pOF: error %d.\n", - np, err); - } - - /* support up to one watchdog timer */ - np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt"); - if (np) { - if ((err = mv64x60_wdt_device_setup(np, id))) - printk(KERN_ERR "Failed to initialize MV64x60 " - "Watchdog %pOF: error %d.\n", - np, err); - of_node_put(np); - } - - /* Now add every node that is on the device bus */ - for_each_compatible_node(np, NULL, "marvell,mv64360") - of_platform_bus_probe(np, of_mv64x60_devices, NULL); - - return 0; -} -arch_initcall(mv64x60_device_setup); - -static int __init mv64x60_add_mpsc_console(void) -{ - struct device_node *np = NULL; - const char *prop; - - prop = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (prop == NULL) - goto not_mpsc; - - np = of_find_node_by_path(prop); - if (!np) - goto not_mpsc; - - if (!of_device_is_compatible(np, "marvell,mv64360-mpsc")) - goto not_mpsc; - - prop = of_get_property(np, "cell-index", NULL); - if (!prop) - goto not_mpsc; - - add_preferred_console("ttyMM", *(int *)prop, NULL); - -not_mpsc: - return 0; -} -console_initcall(mv64x60_add_mpsc_console); diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c deleted file mode 100644 index 1afcdb428e511..0000000000000 --- a/arch/powerpc/sysdev/mv64x60_pci.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery) - * - * Author: Dale Farnsworth - * - * 2007 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include -#include -#include - -#include -#include - -#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */ - -#ifdef CONFIG_SYSFS -/* 32-bit hex or dec stringified number + '\n' */ -#define MV64X60_VAL_LEN_MAX 11 -#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68 - -static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t off, size_t count) -{ - struct pci_dev *phb; - u32 v; - - if (off > 0) - return 0; - if (count < MV64X60_VAL_LEN_MAX) - return -EINVAL; - - phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0)); - if (!phb) - return -ENODEV; - pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v); - pci_dev_put(phb); - - return sprintf(buf, "0x%08x\n", v); -} - -static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t off, size_t count) -{ - struct pci_dev *phb; - u32 v; - - if (off > 0) - return 0; - if (count <= 0) - return -EINVAL; - - if (sscanf(buf, "%i", &v) != 1) - return -EINVAL; - - phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0)); - if (!phb) - return -ENODEV; - pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v); - pci_dev_put(phb); - - return count; -} - -static const struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */ - .attr = { - .name = "hs_reg", - .mode = 0644, - }, - .size = MV64X60_VAL_LEN_MAX, - .read = mv64x60_hs_reg_read, - .write = mv64x60_hs_reg_write, -}; - -static int __init mv64x60_sysfs_init(void) -{ - struct device_node *np; - struct platform_device *pdev; - const unsigned int *prop; - - np = of_find_compatible_node(NULL, NULL, "marvell,mv64360"); - if (!np) - return 0; - - prop = of_get_property(np, "hs_reg_valid", NULL); - of_node_put(np); - - pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr); -} - -subsys_initcall(mv64x60_sysfs_init); - -#endif /* CONFIG_SYSFS */ - -static void mv64x60_pci_fixup_early(struct pci_dev *dev) -{ - /* - * Set the host bridge hdr_type to an invalid value so that - * pci_setup_device() will ignore the host bridge. - */ - dev->hdr_type = PCI_HEADER_TYPE_INVALID; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360, - mv64x60_pci_fixup_early); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460, - mv64x60_pci_fixup_early); - -static int __init mv64x60_add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - struct resource rsrc; - const int *bus_range; - int primary; - - memset(&rsrc, 0, sizeof(rsrc)); - - /* Fetch host bridge registers address */ - if (of_address_to_resource(dev, 0, &rsrc)) { - printk(KERN_ERR "No PCI reg property in device tree\n"); - return -ENODEV; - } - - /* Get bus range if any */ - bus_range = of_get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) - printk(KERN_WARNING "Can't get bus-range for %pOF, assume" - " bus 0\n", dev); - - hose = pcibios_alloc_controller(dev); - if (!hose) - return -ENOMEM; - - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0); - hose->self_busno = hose->first_busno; - - printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. " - "Firmware bus number: %d->%d\n", - (unsigned long long)rsrc.start, hose->first_busno, - hose->last_busno); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - primary = (hose->first_busno == 0); - pci_process_bridge_OF_ranges(hose, dev, primary); - - return 0; -} - -void __init mv64x60_pci_init(void) -{ - struct device_node *np; - - for_each_compatible_node(np, "pci", "marvell,mv64360-pci") - mv64x60_add_bridge(np); -} diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c deleted file mode 100644 index a79953deb4896..0000000000000 --- a/arch/powerpc/sysdev/mv64x60_pic.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * Interrupt handling for Marvell mv64360/mv64460 host bridges (Discovery) - * - * Author: Dale Farnsworth - * - * 2007 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "mv64x60.h" - -/* Interrupt Controller Interface Registers */ -#define MV64X60_IC_MAIN_CAUSE_LO 0x0004 -#define MV64X60_IC_MAIN_CAUSE_HI 0x000c -#define MV64X60_IC_CPU0_INTR_MASK_LO 0x0014 -#define MV64X60_IC_CPU0_INTR_MASK_HI 0x001c -#define MV64X60_IC_CPU0_SELECT_CAUSE 0x0024 - -#define MV64X60_HIGH_GPP_GROUPS 0x0f000000 -#define MV64X60_SELECT_CAUSE_HIGH 0x40000000 - -/* General Purpose Pins Controller Interface Registers */ -#define MV64x60_GPP_INTR_CAUSE 0x0008 -#define MV64x60_GPP_INTR_MASK 0x000c - -#define MV64x60_LEVEL1_LOW 0 -#define MV64x60_LEVEL1_HIGH 1 -#define MV64x60_LEVEL1_GPP 2 - -#define MV64x60_LEVEL1_MASK 0x00000060 -#define MV64x60_LEVEL1_OFFSET 5 - -#define MV64x60_LEVEL2_MASK 0x0000001f - -#define MV64x60_NUM_IRQS 96 - -static DEFINE_SPINLOCK(mv64x60_lock); - -static void __iomem *mv64x60_irq_reg_base; -static void __iomem *mv64x60_gpp_reg_base; - -/* - * Interrupt Controller Handling - * - * The interrupt controller handles three groups of interrupts: - * main low: IRQ0-IRQ31 - * main high: IRQ32-IRQ63 - * gpp: IRQ64-IRQ95 - * - * This code handles interrupts in two levels. Level 1 selects the - * interrupt group, and level 2 selects an IRQ within that group. - * Each group has its own irq_chip structure. - */ - -static u32 mv64x60_cached_low_mask; -static u32 mv64x60_cached_high_mask = MV64X60_HIGH_GPP_GROUPS; -static u32 mv64x60_cached_gpp_mask; - -static struct irq_domain *mv64x60_irq_host; - -/* - * mv64x60_chip_low functions - */ - -static void mv64x60_mask_low(struct irq_data *d) -{ - int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK; - unsigned long flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - mv64x60_cached_low_mask &= ~(1 << level2); - out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO, - mv64x60_cached_low_mask); - spin_unlock_irqrestore(&mv64x60_lock, flags); - (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO); -} - -static void mv64x60_unmask_low(struct irq_data *d) -{ - int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK; - unsigned long flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - mv64x60_cached_low_mask |= 1 << level2; - out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO, - mv64x60_cached_low_mask); - spin_unlock_irqrestore(&mv64x60_lock, flags); - (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO); -} - -static struct irq_chip mv64x60_chip_low = { - .name = "mv64x60_low", - .irq_mask = mv64x60_mask_low, - .irq_mask_ack = mv64x60_mask_low, - .irq_unmask = mv64x60_unmask_low, -}; - -/* - * mv64x60_chip_high functions - */ - -static void mv64x60_mask_high(struct irq_data *d) -{ - int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK; - unsigned long flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - mv64x60_cached_high_mask &= ~(1 << level2); - out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI, - mv64x60_cached_high_mask); - spin_unlock_irqrestore(&mv64x60_lock, flags); - (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI); -} - -static void mv64x60_unmask_high(struct irq_data *d) -{ - int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK; - unsigned long flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - mv64x60_cached_high_mask |= 1 << level2; - out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI, - mv64x60_cached_high_mask); - spin_unlock_irqrestore(&mv64x60_lock, flags); - (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI); -} - -static struct irq_chip mv64x60_chip_high = { - .name = "mv64x60_high", - .irq_mask = mv64x60_mask_high, - .irq_mask_ack = mv64x60_mask_high, - .irq_unmask = mv64x60_unmask_high, -}; - -/* - * mv64x60_chip_gpp functions - */ - -static void mv64x60_mask_gpp(struct irq_data *d) -{ - int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK; - unsigned long flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - mv64x60_cached_gpp_mask &= ~(1 << level2); - out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, - mv64x60_cached_gpp_mask); - spin_unlock_irqrestore(&mv64x60_lock, flags); - (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK); -} - -static void mv64x60_mask_ack_gpp(struct irq_data *d) -{ - int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK; - unsigned long flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - mv64x60_cached_gpp_mask &= ~(1 << level2); - out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, - mv64x60_cached_gpp_mask); - out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE, - ~(1 << level2)); - spin_unlock_irqrestore(&mv64x60_lock, flags); - (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE); -} - -static void mv64x60_unmask_gpp(struct irq_data *d) -{ - int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK; - unsigned long flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - mv64x60_cached_gpp_mask |= 1 << level2; - out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, - mv64x60_cached_gpp_mask); - spin_unlock_irqrestore(&mv64x60_lock, flags); - (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK); -} - -static struct irq_chip mv64x60_chip_gpp = { - .name = "mv64x60_gpp", - .irq_mask = mv64x60_mask_gpp, - .irq_mask_ack = mv64x60_mask_ack_gpp, - .irq_unmask = mv64x60_unmask_gpp, -}; - -/* - * mv64x60_host_ops functions - */ - -static struct irq_chip *mv64x60_chips[] = { - [MV64x60_LEVEL1_LOW] = &mv64x60_chip_low, - [MV64x60_LEVEL1_HIGH] = &mv64x60_chip_high, - [MV64x60_LEVEL1_GPP] = &mv64x60_chip_gpp, -}; - -static int mv64x60_host_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hwirq) -{ - int level1; - - irq_set_status_flags(virq, IRQ_LEVEL); - - level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET; - BUG_ON(level1 > MV64x60_LEVEL1_GPP); - irq_set_chip_and_handler(virq, mv64x60_chips[level1], - handle_level_irq); - - return 0; -} - -static const struct irq_domain_ops mv64x60_host_ops = { - .map = mv64x60_host_map, -}; - -/* - * Global functions - */ - -void __init mv64x60_init_irq(void) -{ - struct device_node *np; - phys_addr_t paddr; - unsigned int size; - const unsigned int *reg; - unsigned long flags; - - np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); - reg = of_get_property(np, "reg", &size); - paddr = of_translate_address(np, reg); - mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); - of_node_put(np); - - np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic"); - reg = of_get_property(np, "reg", &size); - paddr = of_translate_address(np, reg); - mv64x60_irq_reg_base = ioremap(paddr, reg[1]); - - mv64x60_irq_host = irq_domain_add_linear(np, MV64x60_NUM_IRQS, - &mv64x60_host_ops, NULL); - - spin_lock_irqsave(&mv64x60_lock, flags); - out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, - mv64x60_cached_gpp_mask); - out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO, - mv64x60_cached_low_mask); - out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI, - mv64x60_cached_high_mask); - - out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE, 0); - out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_LO, 0); - out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_HI, 0); - spin_unlock_irqrestore(&mv64x60_lock, flags); -} - -unsigned int mv64x60_get_irq(void) -{ - u32 cause; - int level1; - irq_hw_number_t hwirq; - int virq = 0; - - cause = in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_SELECT_CAUSE); - if (cause & MV64X60_SELECT_CAUSE_HIGH) { - cause &= mv64x60_cached_high_mask; - level1 = MV64x60_LEVEL1_HIGH; - if (cause & MV64X60_HIGH_GPP_GROUPS) { - cause = in_le32(mv64x60_gpp_reg_base + - MV64x60_GPP_INTR_CAUSE); - cause &= mv64x60_cached_gpp_mask; - level1 = MV64x60_LEVEL1_GPP; - } - } else { - cause &= mv64x60_cached_low_mask; - level1 = MV64x60_LEVEL1_LOW; - } - if (cause) { - hwirq = (level1 << MV64x60_LEVEL1_OFFSET) | __ilog2(cause); - virq = irq_linear_revmap(mv64x60_irq_host, hwirq); - } - - return virq; -} diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c deleted file mode 100644 index 3b8734b870e9c..0000000000000 --- a/arch/powerpc/sysdev/mv64x60_udbg.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * udbg serial input/output routines for the Marvell MV64x60 (Discovery). - * - * Author: Dale Farnsworth - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include - -#include - -#define MPSC_0_CR1_OFFSET 0x000c - -#define MPSC_0_CR2_OFFSET 0x0010 -#define MPSC_CHR_2_TCS (1 << 9) - -#define MPSC_0_CHR_10_OFFSET 0x0030 - -#define MPSC_INTR_CAUSE_OFF_0 0x0004 -#define MPSC_INTR_CAUSE_OFF_1 0x000c -#define MPSC_INTR_CAUSE_RCC (1<<6) - -static void __iomem *mpsc_base; -static void __iomem *mpsc_intr_cause; - -static void mv64x60_udbg_putc(char c) -{ - if (c == '\n') - mv64x60_udbg_putc('\r'); - - while(in_le32(mpsc_base + MPSC_0_CR2_OFFSET) & MPSC_CHR_2_TCS) - ; - out_le32(mpsc_base + MPSC_0_CR1_OFFSET, c); - out_le32(mpsc_base + MPSC_0_CR2_OFFSET, MPSC_CHR_2_TCS); -} - -static int mv64x60_udbg_testc(void) -{ - return (in_le32(mpsc_intr_cause) & MPSC_INTR_CAUSE_RCC) != 0; -} - -static int mv64x60_udbg_getc(void) -{ - int cause = 0; - int c; - - while (!mv64x60_udbg_testc()) - ; - - c = in_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2); - out_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2, c); - out_le32(mpsc_intr_cause, cause & ~MPSC_INTR_CAUSE_RCC); - return c; -} - -static int mv64x60_udbg_getc_poll(void) -{ - if (!mv64x60_udbg_testc()) - return -1; - - return mv64x60_udbg_getc(); -} - -static void mv64x60_udbg_init(void) -{ - struct device_node *np, *mpscintr, *stdout = NULL; - const char *path; - const phandle *ph; - struct resource r[2]; - const int *block_index; - int intr_cause_offset; - int err; - - path = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (!path) - return; - - stdout = of_find_node_by_path(path); - if (!stdout) - return; - - for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") { - if (np == stdout) - break; - } - - of_node_put(stdout); - if (!np) - return; - - block_index = of_get_property(np, "cell-index", NULL); - if (!block_index) - goto error; - - switch (*block_index) { - case 0: - intr_cause_offset = MPSC_INTR_CAUSE_OFF_0; - break; - case 1: - intr_cause_offset = MPSC_INTR_CAUSE_OFF_1; - break; - default: - goto error; - } - - err = of_address_to_resource(np, 0, &r[0]); - if (err) - goto error; - - ph = of_get_property(np, "mpscintr", NULL); - mpscintr = of_find_node_by_phandle(*ph); - if (!mpscintr) - goto error; - - err = of_address_to_resource(mpscintr, 0, &r[1]); - of_node_put(mpscintr); - if (err) - goto error; - - of_node_put(np); - - mpsc_base = ioremap(r[0].start, resource_size(&r[0])); - if (!mpsc_base) - return; - - mpsc_intr_cause = ioremap(r[1].start, resource_size(&r[1])); - if (!mpsc_intr_cause) { - iounmap(mpsc_base); - return; - } - mpsc_intr_cause += intr_cause_offset; - - udbg_putc = mv64x60_udbg_putc; - udbg_getc = mv64x60_udbg_getc; - udbg_getc_poll = mv64x60_udbg_getc_poll; - - return; - -error: - of_node_put(np); -} - -void mv64x60_init_early(void) -{ - mv64x60_udbg_init(); -} -- cgit v1.2.3