/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_SERIAL_H #define _ASM_X86_SERIAL_H /* * This assumes you have a 1.8432 MHz clock for your UART. * * It'd be nice if someone built a serial card with a 24.576 MHz * clock, since the 16550A is capable of handling a top speed of 1.5 * megabits/second; but this requires a faster clock. */ #define BASE_BAUD (1843200/16) /* Standard COM flags (except for COM4, because of the 8514 problem) */ #ifdef CONFIG_SERIAL_8250_DETECT_IRQ # define STD_COMX_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ) # define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | 0 | UPF_AUTO_IRQ) #else # define STD_COMX_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | 0 ) # define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | 0 | 0 ) #endif #define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { .uart = 0, BASE_BAUD, 0x3F8, 4, STD_COMX_FLAGS }, /* ttyS0 */ \ { .uart = 0, BASE_BAUD, 0x2F8, 3, STD_COMX_FLAGS }, /* ttyS1 */ \ { .uart = 0, BASE_BAUD, 0x3E8, 4, STD_COMX_FLAGS }, /* ttyS2 */ \ { .uart = 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ #endif /* _ASM_X86_SERIAL_H */