diff options
| author | Heikki Krogerus <heikki.krogerus@linux.intel.com> | 2020-09-16 12:00:33 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-09-16 12:34:03 +0200 |
| commit | 130a96d698d7bee9f339832d1e47ab26aad8dbf1 (patch) | |
| tree | 893f3827ec4a0fdbffb7126251e4e3b0b6fcf7bb | |
| parent | bf638d736e3e48c2538ebbd3e922c4f3a195db02 (diff) | |
| download | linux-130a96d698d7bee9f339832d1e47ab26aad8dbf1.tar.gz linux-130a96d698d7bee9f339832d1e47ab26aad8dbf1.tar.xz | |
usb: typec: ucsi: acpi: Increase command completion timeout value
UCSI specification quite clearly states that if a command
can't be completed in 10ms, the firmware must notify
about BUSY condition. Unfortunately almost none of the
platforms (the firmware on them) generate the BUSY
notification even if a command can't be completed in time.
The driver already considered that, and used a timeout
value of 5 seconds, but processing especially the alternate
mode discovery commands takes often considerable amount of
time from the firmware, much more than the 5 seconds. That
happens especially after bootup when devices are already
connected to the USB Type-C connector. For now on those
platforms the alternate mode discovery has simply failed
because of the timeout.
To improve the situation, increasing the timeout value for
the command completion to 1 minute. That should give enough
time for even the slowest firmware to process the commands.
Fixes: f56de278e8ec ("usb: typec: ucsi: acpi: Move to the new API")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916090034.25119-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| -rw-r--r-- | drivers/usb/typec/ucsi/ucsi_acpi.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index c0aca2f0f23f..fbfe8f5933af 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -78,7 +78,7 @@ static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset, if (ret) goto out_clear_bit; - if (!wait_for_completion_timeout(&ua->complete, msecs_to_jiffies(5000))) + if (!wait_for_completion_timeout(&ua->complete, 60 * HZ)) ret = -ETIMEDOUT; out_clear_bit: |