Merge tag 'sunxi-clk-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Pull Allwinner clock updates from Maxime Ripard:

  - Support for one new SoC, the V3s
  - Conversion of two old SoCs to the new framework, the old sun5i family
    and the A80
  - A bunch of fixes

* tag 'sunxi-clk-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (25 commits)
  ARM: dts: sun9i: Switch to new clock bindings
  clk: sunxi-ng: Add A80 Display Engine CCU
  clk: sunxi-ng: Add A80 USB CCU
  clk: sunxi-ng: Add A80 CCU
  clk: sunxi-ng: Support separately grouped PLL lock status register
  clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT
  clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag
  clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers
  clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for the GPU
  clk: sunxi-ng: Call divider_round_rate if we only have a single parent
  ARM: gr8: Convert to CCU
  ARM: sun5i: Convert to CCU
  clk: sunxi-ng: Add sun5i CCU driver
  clk: sunxi-ng: Implement global pre-divider
  clk: sunxi-ng: Implement multiplier maximum
  clk: sunxi-ng: mult: Fix minimum in round rate
  clk: sunxi-ng: Implement factors offsets
  clk: sunxi-ng: multiplier: Add fractional support
  clk: sunxi-ng: add support for V3s CCU
  dt-bindings: add device binding for the CCU of Allwinner V3s
  ...

3 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt
new file mode 100644
index 000000000000..fb18f327b97a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt
@@ -0,0 +1,28 @@
+Allwinner A80 Display Engine Clock Control Binding
+--------------------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun9i-a80-de-clks"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the display engine subsystem.
+	  Three are needed:
+  - "mod": the display engine module clock
+  - "dram": the DRAM bus clock for the system
+  - "bus": the bus clock for the whole display engine subsystem
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset control for the display engine subsystem.
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+de_clocks: clock@3000000 {
+	compatible = "allwinner,sun9i-a80-de-clks";
+	reg = <0x03000000 0x30>;
+	clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+	clock-names = "mod", "dram", "bus";
+	resets = <&ccu RST_BUS_DE>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/sun9i-usb.txt b/Documentation/devicetree/bindings/clock/sun9i-usb.txt
new file mode 100644
index 000000000000..3564bd4f2a20
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sun9i-usb.txt
@@ -0,0 +1,24 @@
+Allwinner A80 USB Clock Control Binding
+---------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun9i-a80-usb-clocks"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
+  - "bus": the bus clock for the whole USB subsystem
+  - "hosc": the high frequency oscillator (usually at 24MHz)
+- clock-names: Must contain the clock names described just above
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+usb_clocks: clock@a08000 {
+	compatible = "allwinner,sun9i-a80-usb-clks";
+	reg = <0x00a08000 0x8>;
+	clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+	clock-names = "bus", "hosc";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 74d44a4273f2..bae5668cf427 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -7,6 +7,8 @@ Required properties :
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
+		- "allwinner,sun8i-v3s-ccu"
+		- "allwinner,sun9i-a80-ccu"
 		- "allwinner,sun50i-a64-ccu"
 
 - reg: Must contain the registers base address and length