Merge tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.4:
 - New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse,
   PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board.
 - Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM.
 - Update OPP table according to latest data sheet and add opp-suspend
   to OPP table for i.MX8MQ and i.MX8MM.
 - Add IDEL states for i.MX8MM SoC.
 - Correct I2C clock divider for Layerscape SoCs.
 - Add series alias and LPUART baud clock for i.MX8QXP SoC.
 - Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5
   board.
 - Enable USB1 and Type-C support for i.MX8MM EVK board.
 - Add Thermal Monitor Unit support for LS1028A SoC.
 - Misc small update and correction on Layerscape and i.MX8 support.

* tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
  arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
  arm64: dts: fsl: add support for Hummingboard Pulse
  arm64: dts: ls1088a: update gpio compatible
  arm64: dts: imx: Add i.mx8mq nitrogen8m basic dts support
  arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller
  arm64: dts: ls1088a: Add the DSPI controller node
  arm64: dts: imx8mm: Enable cpu-idle driver
  arm64: dts: ls1028a: Add esdhc node in dts
  arm64: dts: ls1028a: Add properties node for Display output pixel clock
  arm64: dts: lx2160a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: Fix incorrect I2C clock divider
  arm64: dts: ls1012a: Fix incorrect I2C clock divider
  arm64: dts: ls1088a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: fix gpio nodes
  arm64: dts: ls1028a: Add Thermal Monitor Unit node
  arm64: dts: imx8mq-evk: Unbypass audio_pll1
  arm64: dts: imx8mm: Add opp-suspend property to OPP table
  arm64: dts: imx8mq: Add opp-suspend property to OPP table
  arm64: dts: ls1088a: Revise gpio registers to little-endian
  arm64: dts: add the console node for DPAA2 platforms
  ...

Link: https://lore.kernel.org/r/20190825153237.28829-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 44 insertions, 8 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 52aae341d0da..046a0c8c8dd5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -156,6 +156,7 @@
 			/* Industrial only */
 			opp-supported-hw = <0xf>, <0x4>;
 			clock-latency-ns = <150000>;
+			opp-suspend;
 		};
 
 		opp-1000000000 {
@@ -164,21 +165,23 @@
 			/* Consumer only */
 			opp-supported-hw = <0xe>, <0x3>;
 			clock-latency-ns = <150000>;
+			opp-suspend;
 		};
 
 		opp-1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1000000>;
-			opp-supported-hw = <0xc>, <0x7>;
+			opp-supported-hw = <0xc>, <0x4>;
 			clock-latency-ns = <150000>;
+			opp-suspend;
 		};
 
 		opp-1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1000000>;
-			/* Consumer only but rely on speed grading */
-			opp-supported-hw = <0x8>, <0x7>;
+			opp-supported-hw = <0x8>, <0x3>;
 			clock-latency-ns = <150000>;
+			opp-suspend;
 		};
 	};
 
@@ -288,6 +291,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
 			};
 
 			gpio2: gpio@30210000 {
@@ -300,6 +304,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
 			};
 
 			gpio3: gpio@30220000 {
@@ -312,6 +317,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
 			};
 
 			gpio4: gpio@30230000 {
@@ -324,6 +330,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
 			};
 
 			gpio5: gpio@30240000 {
@@ -336,12 +343,14 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
 			};
 
 			tmu: tmu@30260000 {
 				compatible = "fsl,imx8mq-tmu";
 				reg = <0x30260000 0x10000>;
 				interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
 				little-endian;
 				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
 				fsl,tmu-calibration = <0x00000000 0x00000023
@@ -431,8 +440,15 @@
 			};
 
 			iomuxc_gpr: syscon@30340000 {
-				compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr",
+					     "syscon", "simple-mfd";
 				reg = <0x30340000 0x10000>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+				};
 			};
 
 			ocotp: ocotp-ctrl@30350000 {
@@ -727,6 +743,19 @@
 				status = "disabled";
 			};
 
+			dphy: dphy@30a00300 {
+				compatible = "fsl,imx8mq-mipi-dphy";
+				reg = <0x30a00300 0x100>;
+				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				clock-names = "phy_ref";
+				assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <24000000>;
+				#phy-cells = <0>;
+				power-domains = <&pgc_mipi>;
+				status = "disabled";
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
 				reg = <0x30a20000 0x10000>;
@@ -900,9 +929,9 @@
 		usb_dwc3_0: usb@38100000 {
 			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
 			reg = <0x38100000 0x10000>;
-			clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
 			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
-			         <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>;
+				 <&clk IMX8MQ_CLK_32K>;
 			clock-names = "bus_early", "ref", "suspend";
 			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
 			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
@@ -932,9 +961,9 @@
 		usb_dwc3_1: usb@38200000 {
 			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
 			reg = <0x38200000 0x10000>;
-			clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
 			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
-			         <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>;
+				 <&clk IMX8MQ_CLK_32K>;
 			clock-names = "bus_early", "ref", "suspend";
 			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
 			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
@@ -1032,5 +1061,12 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };