summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt')
-rw-r--r--Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt56
1 files changed, 0 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
deleted file mode 100644
index 6a9a63cb0543..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices
-------
-
-Required properties:
-
- - compatible : should be one of the following:
- * "marvell,sd8897-bt"
- * "marvell,sd8997-bt"
-
-Optional properties:
-
- - marvell,cal-data: Calibration data downloaded to the device during
- initialization. This is an array of 28 values(u8).
-
- - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
- firmware will use the pin to wakeup host system (u16).
- - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
- platform. The value will be configured to firmware. This
- is needed to work chip's sleep feature as expected (u16).
- - interrupt-parent: phandle of the parent interrupt controller
- - interrupts : interrupt pin number to the cpu. Driver will request an irq based
- on this interrupt number. During system suspend, the irq will be
- enabled so that the bluetooth chip can wakeup host platform under
- certain condition. During system resume, the irq will be disabled
- to make sure unnecessary interrupt is not received.
-
-Example:
-
-IRQ pin 119 is used as system wakeup source interrupt.
-wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host
-using this device side pin and wakeup latency.
-calibration data is also available in below example.
-
-&mmc3 {
- status = "okay";
- vmmc-supply = <&wlan_en_reg>;
- bus-width = <4>;
- cap-power-off-card;
- keep-power-in-suspend;
-
- #address-cells = <1>;
- #size-cells = <0>;
- btmrvl: bluetooth@2 {
- compatible = "marvell,sd8897-bt";
- reg = <2>;
- interrupt-parent = <&pio>;
- interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
-
- marvell,cal-data = /bits/ 8 <
- 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
- 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
- 0x00 0x00 0xf0 0x00>;
- marvell,wakeup-pin = /bits/ 16 <0x0d>;
- marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
- };
-};