diff options
Diffstat (limited to 'arch/arc/mm')
| -rw-r--r-- | arch/arc/mm/cache.c | 155 | ||||
| -rw-r--r-- | arch/arc/mm/dma.c | 2 | ||||
| -rw-r--r-- | arch/arc/mm/extable.c | 3 | ||||
| -rw-r--r-- | arch/arc/mm/init.c | 5 |
4 files changed, 130 insertions, 35 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index ec86ac0e3321..d408fa21a07c 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -23,7 +23,7 @@ static int l2_line_sz; static int ioc_exists; -int slc_enable = 1, ioc_enable = 0; +int slc_enable = 1, ioc_enable = 1; unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */ unsigned long perip_end = 0xFFFFFFFF; /* legacy value */ @@ -271,7 +271,11 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr, /* * For ARC700 MMUv3 I-cache and D-cache flushes - * Also reused for HS38 aliasing I-cache configuration + * - ARC700 programming model requires paddr and vaddr be passed in seperate + * AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the + * caches actually alias or not. + * - For HS38, only the aliasing I-cache configuration uses the PTAG reg + * (non aliasing I-cache version doesn't; while D-cache can't possibly alias) */ static inline void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, @@ -458,6 +462,21 @@ static inline void __dc_entire_op(const int op) __after_dc_op(op); } +static inline void __dc_disable(void) +{ + const int r = ARC_REG_DC_CTRL; + + __dc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS); +} + +static void __dc_enable(void) +{ + const int r = ARC_REG_DC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS); +} + /* For kernel mappings cache operation: index is same as paddr */ #define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) @@ -483,6 +502,8 @@ static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr, #else #define __dc_entire_op(op) +#define __dc_disable() +#define __dc_enable() #define __dc_line_op(paddr, vaddr, sz, op) #define __dc_line_op_k(paddr, sz, op) @@ -597,6 +618,40 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) #endif } +noinline static void slc_entire_op(const int op) +{ + unsigned int ctrl, r = ARC_REG_SLC_CTRL; + + ctrl = read_aux_reg(r); + + if (!(op & OP_FLUSH)) /* i.e. OP_INV */ + ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ + else + ctrl |= SLC_CTRL_IM; + + write_aux_reg(r, ctrl); + + write_aux_reg(ARC_REG_SLC_INVALIDATE, 1); + + /* Important to wait for flush to complete */ + while (read_aux_reg(r) & SLC_CTRL_BUSY); +} + +static inline void arc_slc_disable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + slc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS); +} + +static inline void arc_slc_enable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS); +} + /*********************************************************** * Exported APIs */ @@ -923,21 +978,54 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) return 0; } -void arc_cache_init(void) +/* + * IO-Coherency (IOC) setup rules: + * + * 1. Needs to be at system level, so only once by Master core + * Non-Masters need not be accessing caches at that time + * - They are either HALT_ON_RESET and kick started much later or + * - if run on reset, need to ensure that arc_platform_smp_wait_to_boot() + * doesn't perturb caches or coherency unit + * + * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC, + * otherwise any straggler data might behave strangely post IOC enabling + * + * 3. All Caches need to be disabled when setting up IOC to elide any in-flight + * Coherency transactions + */ +noinline void __init arc_ioc_setup(void) { - unsigned int __maybe_unused cpu = smp_processor_id(); - char str[256]; + unsigned int ap_sz; - printk(arc_cache_mumbojumbo(0, str, sizeof(str))); + /* Flush + invalidate + disable L1 dcache */ + __dc_disable(); + + /* Flush + invalidate SLC */ + if (read_aux_reg(ARC_REG_SLC_BCR)) + slc_entire_op(OP_FLUSH_N_INV); + + /* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */ + write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); /* - * Only master CPU needs to execute rest of function: - * - Assume SMP so all cores will have same cache config so - * any geomtry checks will be same for all - * - IOC setup / dma callbacks only need to be setup once + * IOC Aperture size: + * decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M + * TBD: fix for PGU + 1GB of low mem + * TBD: fix for PAE */ - if (cpu) - return; + ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2; + write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz); + + write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); + write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); + + /* Re-enable L1 dcache */ + __dc_enable(); +} + +void __init arc_cache_init_master(void) +{ + unsigned int __maybe_unused cpu = smp_processor_id(); if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; @@ -985,30 +1073,14 @@ void arc_cache_init(void) } } - if (is_isa_arcv2() && l2_line_sz && !slc_enable) { - - /* IM set : flush before invalidate */ - write_aux_reg(ARC_REG_SLC_CTRL, - read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM); + /* Note that SLC disable not formally supported till HS 3.0 */ + if (is_isa_arcv2() && l2_line_sz && !slc_enable) + arc_slc_disable(); - write_aux_reg(ARC_REG_SLC_INVALIDATE, 1); - - /* Important to wait for flush to complete */ - while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); - write_aux_reg(ARC_REG_SLC_CTRL, - read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE); - } + if (is_isa_arcv2() && ioc_enable) + arc_ioc_setup(); if (is_isa_arcv2() && ioc_enable) { - /* IO coherency base - 0x8z */ - write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); - /* IO coherency aperture size - 512Mb: 0x8z-0xAz */ - write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); - /* Enable partial writes */ - write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); - /* Enable IO coherency */ - write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); - __dma_cache_wback_inv = __dma_cache_wback_inv_ioc; __dma_cache_inv = __dma_cache_inv_ioc; __dma_cache_wback = __dma_cache_wback_ioc; @@ -1022,3 +1094,20 @@ void arc_cache_init(void) __dma_cache_wback = __dma_cache_wback_l1; } } + +void __ref arc_cache_init(void) +{ + unsigned int __maybe_unused cpu = smp_processor_id(); + char str[256]; + + printk(arc_cache_mumbojumbo(0, str, sizeof(str))); + + /* + * Only master CPU needs to execute rest of function: + * - Assume SMP so all cores will have same cache config so + * any geomtry checks will be same for all + * - IOC setup / dma callbacks only need to be setup once + */ + if (!cpu) + arc_cache_init_master(); +} diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 08450a1a5b5f..2a07e6ecafbd 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -218,7 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask) return dma_mask == DMA_BIT_MASK(32); } -struct dma_map_ops arc_dma_ops = { +const struct dma_map_ops arc_dma_ops = { .alloc = arc_dma_alloc, .free = arc_dma_free, .mmap = arc_dma_mmap, diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c index aa652e281324..c86906b41bfe 100644 --- a/arch/arc/mm/extable.c +++ b/arch/arc/mm/extable.c @@ -8,7 +8,8 @@ * Borrowed heavily from MIPS */ -#include <linux/module.h> +#include <linux/export.h> +#include <linux/extable.h> #include <linux/uaccess.h> int fixup_exception(struct pt_regs *regs) diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 399e2f223d25..8c9415ed6280 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -40,6 +40,11 @@ struct pglist_data node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); #endif +long __init arc_get_mem_sz(void) +{ + return low_mem_sz; +} + /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ static int __init setup_mem_sz(char *str) { |