diff options
Diffstat (limited to 'drivers/gpu/drm/nouveau/nvkm/subdev/secboot/priv.h')
| -rw-r--r-- | drivers/gpu/drm/nouveau/nvkm/subdev/secboot/priv.h | 199 |
1 files changed, 14 insertions, 185 deletions
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/priv.h b/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/priv.h index a9a8a0e1017e..936a65f5658c 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/priv.h +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/priv.h @@ -27,20 +27,16 @@ #include <subdev/mmu.h> struct nvkm_secboot_func { - int (*init)(struct nvkm_secboot *); + int (*oneinit)(struct nvkm_secboot *); int (*fini)(struct nvkm_secboot *, bool suspend); void *(*dtor)(struct nvkm_secboot *); - int (*reset)(struct nvkm_secboot *, enum nvkm_secboot_falcon); - int (*start)(struct nvkm_secboot *, enum nvkm_secboot_falcon); - - /* ID of the falcon that will perform secure boot */ - enum nvkm_secboot_falcon boot_falcon; - /* Bit-mask of IDs of managed falcons */ - unsigned long managed_falcons; + int (*run_blob)(struct nvkm_secboot *, struct nvkm_gpuobj *); }; -int nvkm_secboot_ctor(const struct nvkm_secboot_func *, struct nvkm_device *, - int index, struct nvkm_secboot *); +extern const char *nvkm_secboot_falcon_name[]; + +int nvkm_secboot_ctor(const struct nvkm_secboot_func *, struct nvkm_acr *, + struct nvkm_device *, int, struct nvkm_secboot *); int nvkm_secboot_falcon_reset(struct nvkm_secboot *); int nvkm_secboot_falcon_run(struct nvkm_secboot *); @@ -48,187 +44,20 @@ struct flcn_u64 { u32 lo; u32 hi; }; + static inline u64 flcn64_to_u64(const struct flcn_u64 f) { return ((u64)f.hi) << 32 | f.lo; } -/** - * struct gm200_flcn_bl_desc - DMEM bootloader descriptor - * @signature: 16B signature for secure code. 0s if no secure code - * @ctx_dma: DMA context to be used by BL while loading code/data - * @code_dma_base: 256B-aligned Physical FB Address where code is located - * (falcon's $xcbase register) - * @non_sec_code_off: offset from code_dma_base where the non-secure code is - * located. The offset must be multiple of 256 to help perf - * @non_sec_code_size: the size of the nonSecure code part. - * @sec_code_off: offset from code_dma_base where the secure code is - * located. The offset must be multiple of 256 to help perf - * @sec_code_size: offset from code_dma_base where the secure code is - * located. The offset must be multiple of 256 to help perf - * @code_entry_point: code entry point which will be invoked by BL after - * code is loaded. - * @data_dma_base: 256B aligned Physical FB Address where data is located. - * (falcon's $xdbase register) - * @data_size: size of data block. Should be multiple of 256B - * - * Structure used by the bootloader to load the rest of the code. This has - * to be filled by host and copied into DMEM at offset provided in the - * hsflcn_bl_desc.bl_desc_dmem_load_off. - */ -struct gm200_flcn_bl_desc { - u32 reserved[4]; - u32 signature[4]; - u32 ctx_dma; - struct flcn_u64 code_dma_base; - u32 non_sec_code_off; - u32 non_sec_code_size; - u32 sec_code_off; - u32 sec_code_size; - u32 code_entry_point; - struct flcn_u64 data_dma_base; - u32 data_size; -}; - -/** - * struct hsflcn_acr_desc - data section of the HS firmware - * - * This header is to be copied at the beginning of DMEM by the HS bootloader. - * - * @signature: signature of ACR ucode - * @wpr_region_id: region ID holding the WPR header and its details - * @wpr_offset: offset from the WPR region holding the wpr header - * @regions: region descriptors - * @nonwpr_ucode_blob_size: size of LS blob - * @nonwpr_ucode_blob_start: FB location of LS blob is - */ -struct hsflcn_acr_desc { - union { - u8 reserved_dmem[0x200]; - u32 signatures[4]; - } ucode_reserved_space; - u32 wpr_region_id; - u32 wpr_offset; - u32 mmu_mem_range; -#define FLCN_ACR_MAX_REGIONS 2 - struct { - u32 no_regions; - struct { - u32 start_addr; - u32 end_addr; - u32 region_id; - u32 read_mask; - u32 write_mask; - u32 client_mask; - } region_props[FLCN_ACR_MAX_REGIONS]; - } regions; - u32 ucode_blob_size; - u64 ucode_blob_base __aligned(8); - struct { - u32 vpr_enabled; - u32 vpr_start; - u32 vpr_end; - u32 hdcp_policies; - } vpr_desc; -}; - -/** - * Contains the whole secure boot state, allowing it to be performed as needed - * @wpr_addr: physical address of the WPR region - * @wpr_size: size in bytes of the WPR region - * @ls_blob: LS blob of all the LS firmwares, signatures, bootloaders - * @ls_blob_size: size of the LS blob - * @ls_blob_nb_regions: number of LS firmwares that will be loaded - * @acr_blob: HS blob - * @acr_blob_vma: mapping of the HS blob into the secure falcon's VM - * @acr_bl_desc: bootloader descriptor of the HS blob - * @hsbl_blob: HS blob bootloader - * @inst: instance block for HS falcon - * @pgd: page directory for the HS falcon - * @vm: address space used by the HS falcon - * @falcon_state: current state of the managed falcons - * @firmware_ok: whether the firmware blobs have been created - */ -struct gm200_secboot { - struct nvkm_secboot base; - const struct gm200_secboot_func *func; - - /* - * Address and size of the WPR region. On dGPU this will be the - * address of the LS blob. On Tegra this is a fixed region set by the - * bootloader - */ - u64 wpr_addr; - u32 wpr_size; - - /* - * HS FW - lock WPR region (dGPU only) and load LS FWs - * on Tegra the HS FW copies the LS blob into the fixed WPR instead - */ - struct nvkm_gpuobj *acr_load_blob; - struct gm200_flcn_bl_desc acr_load_bl_desc; - - /* HS FW - unlock WPR region (dGPU only) */ - struct nvkm_gpuobj *acr_unload_blob; - struct gm200_flcn_bl_desc acr_unload_bl_desc; - - /* HS bootloader */ - void *hsbl_blob; - - /* LS FWs, to be loaded by the HS ACR */ - struct nvkm_gpuobj *ls_blob; - - /* Instance block & address space used for HS FW execution */ - struct nvkm_gpuobj *inst; - struct nvkm_gpuobj *pgd; - struct nvkm_vm *vm; - - /* To keep track of the state of all managed falcons */ - enum { - /* In non-secure state, no firmware loaded, no privileges*/ - NON_SECURE = 0, - /* In low-secure mode and ready to be started */ - RESET, - /* In low-secure mode and running */ - RUNNING, - } falcon_state[NVKM_SECBOOT_FALCON_END]; - - bool firmware_ok; -}; -#define gm200_secboot(sb) container_of(sb, struct gm200_secboot, base) - -/** - * Contains functions we wish to abstract between GM200-like implementations - * @bl_desc_size: size of the BL descriptor used by this chip. - * @fixup_bl_desc: hook that generates the proper BL descriptor format from - * the generic GM200 format into a data array of size - * bl_desc_size - * @fixup_hs_desc: hook that twiddles the HS descriptor before it is used - * @prepare_blobs: prepares the various blobs needed for secure booting - */ -struct gm200_secboot_func { - /* - * Size of the bootloader descriptor for this chip. A block of this - * size is allocated before booting a falcon and the fixup_bl_desc - * callback is called on it - */ - u32 bl_desc_size; - void (*fixup_bl_desc)(const struct gm200_flcn_bl_desc *, void *); - - /* - * Chip-specific modifications of the HS descriptor can be done here. - * On dGPU this is used to fill the information about the WPR region - * we want the HS FW to set up. - */ - void (*fixup_hs_desc)(struct gm200_secboot *, struct hsflcn_acr_desc *); - int (*prepare_blobs)(struct gm200_secboot *); -}; +static inline struct flcn_u64 u64_to_flcn64(u64 u) +{ + struct flcn_u64 ret; -int gm200_secboot_init(struct nvkm_secboot *); -void *gm200_secboot_dtor(struct nvkm_secboot *); -int gm200_secboot_reset(struct nvkm_secboot *, u32); -int gm200_secboot_start(struct nvkm_secboot *, u32); + ret.hi = upper_32_bits(u); + ret.lo = lower_32_bits(u); -int gm20x_secboot_prepare_blobs(struct gm200_secboot *); + return ret; +} #endif |