diff options
Diffstat (limited to 'drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c')
| -rw-r--r-- | drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 94 |
1 files changed, 50 insertions, 44 deletions
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index bdbcd2b088a0..99b187bfdd55 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3252,12 +3252,13 @@ out: return config; } -int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter, - struct ethtool_cmd *ecmd) +int qlcnic_83xx_get_link_ksettings(struct qlcnic_adapter *adapter, + struct ethtool_link_ksettings *ecmd) { struct qlcnic_hardware_context *ahw = adapter->ahw; u32 config = 0; int status = 0; + u32 supported, advertising; if (!test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) { /* Get port configuration info */ @@ -3271,45 +3272,48 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter, ahw->board_type = QLCNIC_BRDTYPE_83XX_10G; if (netif_running(adapter->netdev) && ahw->has_link_events) { - ethtool_cmd_speed_set(ecmd, ahw->link_speed); - ecmd->duplex = ahw->link_duplex; - ecmd->autoneg = ahw->link_autoneg; + ecmd->base.speed = ahw->link_speed; + ecmd->base.duplex = ahw->link_duplex; + ecmd->base.autoneg = ahw->link_autoneg; } else { - ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN); - ecmd->duplex = DUPLEX_UNKNOWN; - ecmd->autoneg = AUTONEG_DISABLE; + ecmd->base.speed = SPEED_UNKNOWN; + ecmd->base.duplex = DUPLEX_UNKNOWN; + ecmd->base.autoneg = AUTONEG_DISABLE; } - ecmd->supported = (SUPPORTED_10baseT_Full | + supported = (SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full | SUPPORTED_Autoneg); - if (ecmd->autoneg == AUTONEG_ENABLE) { + ethtool_convert_link_mode_to_legacy_u32(&advertising, + ecmd->link_modes.advertising); + + if (ecmd->base.autoneg == AUTONEG_ENABLE) { if (ahw->port_config & QLC_83XX_10_CAPABLE) - ecmd->advertising |= SUPPORTED_10baseT_Full; + advertising |= SUPPORTED_10baseT_Full; if (ahw->port_config & QLC_83XX_100_CAPABLE) - ecmd->advertising |= SUPPORTED_100baseT_Full; + advertising |= SUPPORTED_100baseT_Full; if (ahw->port_config & QLC_83XX_1G_CAPABLE) - ecmd->advertising |= SUPPORTED_1000baseT_Full; + advertising |= SUPPORTED_1000baseT_Full; if (ahw->port_config & QLC_83XX_10G_CAPABLE) - ecmd->advertising |= SUPPORTED_10000baseT_Full; + advertising |= SUPPORTED_10000baseT_Full; if (ahw->port_config & QLC_83XX_AUTONEG_ENABLE) - ecmd->advertising |= ADVERTISED_Autoneg; + advertising |= ADVERTISED_Autoneg; } else { switch (ahw->link_speed) { case SPEED_10: - ecmd->advertising = SUPPORTED_10baseT_Full; + advertising = SUPPORTED_10baseT_Full; break; case SPEED_100: - ecmd->advertising = SUPPORTED_100baseT_Full; + advertising = SUPPORTED_100baseT_Full; break; case SPEED_1000: - ecmd->advertising = SUPPORTED_1000baseT_Full; + advertising = SUPPORTED_1000baseT_Full; break; case SPEED_10000: - ecmd->advertising = SUPPORTED_10000baseT_Full; + advertising = SUPPORTED_10000baseT_Full; break; default: break; @@ -3319,56 +3323,58 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter, switch (ahw->supported_type) { case PORT_FIBRE: - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising |= ADVERTISED_FIBRE; - ecmd->port = PORT_FIBRE; - ecmd->transceiver = XCVR_EXTERNAL; + supported |= SUPPORTED_FIBRE; + advertising |= ADVERTISED_FIBRE; + ecmd->base.port = PORT_FIBRE; break; case PORT_TP: - ecmd->supported |= SUPPORTED_TP; - ecmd->advertising |= ADVERTISED_TP; - ecmd->port = PORT_TP; - ecmd->transceiver = XCVR_INTERNAL; + supported |= SUPPORTED_TP; + advertising |= ADVERTISED_TP; + ecmd->base.port = PORT_TP; break; case PORT_DA: - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising |= ADVERTISED_FIBRE; - ecmd->port = PORT_DA; - ecmd->transceiver = XCVR_EXTERNAL; + supported |= SUPPORTED_FIBRE; + advertising |= ADVERTISED_FIBRE; + ecmd->base.port = PORT_DA; break; default: - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising |= ADVERTISED_FIBRE; - ecmd->port = PORT_OTHER; - ecmd->transceiver = XCVR_EXTERNAL; + supported |= SUPPORTED_FIBRE; + advertising |= ADVERTISED_FIBRE; + ecmd->base.port = PORT_OTHER; break; } - ecmd->phy_address = ahw->physical_port; + ecmd->base.phy_address = ahw->physical_port; + + ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising, + advertising); + return status; } -int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter, - struct ethtool_cmd *ecmd) +int qlcnic_83xx_set_link_ksettings(struct qlcnic_adapter *adapter, + const struct ethtool_link_ksettings *ecmd) { struct qlcnic_hardware_context *ahw = adapter->ahw; u32 config = adapter->ahw->port_config; int status = 0; /* 83xx devices do not support Half duplex */ - if (ecmd->duplex == DUPLEX_HALF) { - netdev_info(adapter->netdev, - "Half duplex mode not supported\n"); - return -EINVAL; + if (ecmd->base.duplex == DUPLEX_HALF) { + netdev_info(adapter->netdev, + "Half duplex mode not supported\n"); + return -EINVAL; } - if (ecmd->autoneg) { + if (ecmd->base.autoneg) { ahw->port_config |= QLC_83XX_AUTONEG_ENABLE; ahw->port_config |= (QLC_83XX_100_CAPABLE | QLC_83XX_1G_CAPABLE | QLC_83XX_10G_CAPABLE); } else { /* force speed */ ahw->port_config &= ~QLC_83XX_AUTONEG_ENABLE; - switch (ethtool_cmd_speed(ecmd)) { + switch (ecmd->base.speed) { case SPEED_10: ahw->port_config &= ~(QLC_83XX_100_CAPABLE | QLC_83XX_1G_CAPABLE | |