summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-highbank
Commit message (Collapse)AuthorAgeFilesLines
* ARM: highbank: Only touch common coherency control register fieldsRob Herring2013-07-221-3/+4
| | | | | | | | | | Midway adds new register fields to the coherency control registers, so writing absolute values will break on Midway. Change the register accesses to only modify the necessary and common fields in order to support both Midway and Highbank. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* arm: delete __cpuinit/__CPUINIT usage from all ARM usersPaul Gortmaker2013-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt2013-07-092-3/+6
| | | | | | | | | | | | | | | | Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ARM: highbank: remove the .map_io declarationMaxime Ripard2013-05-241-1/+0
| | | | | | | | | Now that the ARM core code calls debug_ll_io_init, we can remove it from the machine_desc declaration. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'cleanup-for-linus-2' of ↵Linus Torvalds2013-05-071-23/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
| * ARM: highbank: use OF init for sp804 timerRob Herring2013-04-111-19/+0
| | | | | | | | | | | | | | Remove the highbank specific setup for the sp804 timer now that clocksource_of_init will do it. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
| * ARM: convert arm/arm64 arch timer to use CLKSRC_OF initRob Herring2013-04-111-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts arm and arm64 to use CLKSRC_OF DT based initialization for the arch timer. A new function arch_timer_arch_init is added to allow for arch specific setup. This has a side effect of enabling sched_clock on omap5 and exynos5. There should not be any reason not to use the arch timers for sched_clock. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-samsung-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-sh@vger.kernel.org Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* | Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2013-05-031-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: "The major items included in here are: - MCPM, multi-cluster power management, part of the infrastructure required for ARMs big.LITTLE support. - A rework of the ARM KVM code to allow re-use by ARM64. - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes of that stuff for arch/arm - Preparatory patches for Cortex-M3 support from Uwe Kleine-König. There is also a set of three patches in here from Hugh/Catalin to address freeing of inappropriate page tables on LPAE. You already have these from akpm, but they were already part of my tree at the time he sent them, so unfortunately they'll end up with duplicate commits" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE() ARM: IMX: remove unnecessary use of IS_ERR_VALUE() ARM: OMAP: use consistent error checking ARM: cleanup: OMAP hwmod error checking ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels ARM: 7700/2: Make cpu_init() notrace ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE ARM: 7701/1: mm: Allow arch code to control the user page table ceiling ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum() ARM: mcpm: provide an interface to set the SMP ops at run time ARM: mcpm: generic SMP secondary bringup and hotplug support ARM: mcpm_head.S: vlock-based first man election ARM: mcpm: Add baremetal voting mutexes ARM: mcpm: introduce helpers for platform coherency exit/setup ARM: mcpm: introduce the CPU/cluster power API ARM: multi-cluster PM: secondary kernel entry code ARM: cacheflush: add synchronization helpers for mixed cache state accesses ARM: cpu hotplug: remove majority of cache flushing from platforms ARM: smp: flush L1 cache in cpu_die() ARM: tegra: remove tegra specific cpu_disable() ...
| * \ Merge commit '73053d973' into smp-hotplugRussell King2013-05-021-4/+5
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is to fix a merge problem with mach-highbank/hotplug.c, which git silently resolves, but wrongly. This commit contains the correct resolution. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | ARM: cpu hotplug: remove majority of cache flushing from platformsRussell King2013-04-181-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the majority of cache flushing calls from the individual platform files. This is now handled by the core code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds2013-05-021-0/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
| * | | | ARM: Push selects for TWD/SCU into machine entriesStephen Boyd2013-04-091-0/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TWD and SCU configs are selected by default as long as MSM_SCORPIONMP is false and/or MCT is false. Implementing the logic this way certainly saves lines in the Kconfig but it precludes those machines which select MSM_SCORPIONMP or MCT from participating in the single zImage effort because when those machines are combined with other SMP capable machines the TWD and SCU are no longer selected by default. Push the select out to the machine entries so that we can compile these machines together and still select the appropriate configs. Cc: Barry Song <baohua.song@csr.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Simon Horman <horms@verge.net.au> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | | | Merge branch 'fixes' into next/cleanupOlof Johansson2013-04-281-6/+4
|\ \ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merging in fixes since there's a conflict in the omap4 clock tables caused by it. * fixes: (245 commits) ARM: highbank: fix cache flush ordering for cpu hotplug ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock arm: mvebu: Fix the irq map function in SMP mode Fix GE0/GE1 init on ix2-200 as GE0 has no PHY ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller ARM: S3C24XX: Correct NR_IRQS definition for s3c2440 ARM i.MX6: Fix ldb_di clock selection ARM: imx: provide twd clock lookup from device tree ARM: imx35 Bugfix admux clock ARM: clk-imx35: Bugfix iomux clock + Linux 3.9-rc6 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-omap2/cclock44xx_data.c
| * | | ARM: highbank: fix cache flush ordering for cpu hotplugRob Herring2013-04-181-6/+4
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The L1 data cache flush needs to be after highbank_set_cpu_jump call which pollutes the cache with the l2x0_lock. This causes other cores to deadlock waiting for the l2x0_lock. Moving the flush of the entire data cache after highbank_set_cpu_jump fixes the problem. Use flush_cache_louis instead of flush_cache_all are that is sufficient to flush only the L1 data cache. flush_cache_louis did not exist when highbank_cpu_die was originally written. With PL310 errata 769419 enabled, a wmb is inserted into idle which takes the l2x0_lock. This makes the problem much more easily hit and causes reset to hang. Reported-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | Merge branch 'gic' of ↵Olof Johansson2013-04-021-7/+0
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 into next/cleanup * 'gic' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: irqchip: gic: Perform the gic_secondary_init() call via CPU notifier irqchip: gic: Call handle_bad_irq() directly arm: Move chained_irq_(enter|exit) to a generic file arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h + Linux 3.9-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
| * | irqchip: gic: Perform the gic_secondary_init() call via CPU notifierCatalin Marinas2013-03-261-7/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the calls to gic_secondary_init() pass 0 as the first argument. Since this function is called on each CPU when starting, it can be done in a platform-independent way via a CPU notifier registered by the GIC code. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Tested-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Barry Song <baohua.song@csr.com>
* / ARM: smp_twd: convert to use CLKSRC_OF initRob Herring2013-03-111-3/+2
|/ | | | | | | | | | | | | | | | | | | | | | Now that we have OF based init with CLKSRC_OF, convert smp_twd init function to use it and covert all callers of twd_local_timer_of_register. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-omap@vger.kernel.org Cc: spear-devel@list.st.com Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-212-18/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
| * Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson2013-01-142-13/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/cleanup From Rob Herring: Initial irqchip init infrastructure and GIC and VIC clean-ups This creates irqchip initialization infrastructure from Thomas Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips and adapted to use the new infrastructure. All DT enabled platforms using GIC and VIC are converted over to use the new irqchip_init. * tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux: irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: remove assembly ifdefs from gic.h ARM: mach-ux500: use SGI0 to wake up the other core arm: add set_handle_irq() to register the parent IRQ controller handler function irqchip: add basic infrastructure irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS Fixed up massive merge conflicts with the timer cleanup due to adjacent changes: Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
| | * irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.hRob Herring2013-01-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have GIC moved to drivers/irqchip and all GIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com>
| | * ARM: use common irqchip_init for GIC initRob Herring2013-01-121-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert all GIC DT initialization over to use common irqchip_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
| | * ARM: remove mach .handle_irq for GIC usersRob Herring2013-01-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the GIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
| | * ARM: GIC: remove direct use of gic_raise_softirqRob Herring2013-01-101-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of moving gic code to drivers/irqchip, remove the direct platform dependencies on gic_raise_softirq. Move the setup of smp_cross_call into the gic code and use arch_send_wakeup_ipi_mask function to trigger wake-up IPIs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
| * | Merge branch 'clocksource/cleanup' into next/cleanupOlof Johansson2013-01-146-20/+42
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-pxa/time.c
| * | ARM: delete struct sys_timerStephen Warren2012-12-241-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | | Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds2013-02-201-0/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
| * | | cpufreq / highbank: add support for highbank cpufreqMark Langsdorf2013-02-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Highbank processors depend on the external ECME to perform voltage management based on a requested frequency. Communication between the A9 cores and the ECME happens over the pl320 IPC channel. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | ARM / highbank: add support for pl320 IPCRob Herring2013-02-021-0/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | The pl320 IPC allows for interprocessor communication between the highbank A9 and the EnergyCore Management Engine. The pl320 implements a straightforward mailbox protocol. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds2013-02-202-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull clock framework update from Michael Turquette: "The common clock framework changes for 3.9 are almost entirely fixes. None are dire enough to be Cc'd to stable which may be interpreted to mean that users of the framework are reaching stability. Lots of new adoption of this framework is via DeviceTree data and that comes through the respective architecture and platform trees instead of through the clk framework tree. Two new features are improved debugfs output and an improvement to how DT clocks are initialized by reusing a common method." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (25 commits) clk: sunxi: remove stale Makefile entry clk: vexpress: Use common of_clk_init() function clk: zynq: Use common of_clk_init() function clk: vt8500: Use common of_clk_init() function clk: highbank: Use common of_clk_init() function clk: sunxi: Use common of_clk_init() function clk: add common of_clk_init() function clk: Deduplicate exit code in clk_set_rate clk: beautify Makefile clk-divider: fix macros clk: prima2: enable dt-binding clkdev mapping clk: mxs: Index is always positive clk: max77686: Avoid double free at remove time clk: remove exported function from __init section clk: vt8500: Add support for WM8750/WM8850 PLL clocks clk: vt8500: Fix division-by-0 when requested rate=0 clk: vt8500: Fix device clock divisor calculations clk: vt8500: Fix error in PLL calculations on non-exact match. clk: max77686: Remove unnecessary NULL checking for container_of() clk: JSON debugfs clock tree summary ...
| * | | clk: highbank: Use common of_clk_init() functionPrashant Gaikwad2013-01-242-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | Use common of_clk_init() function for clocks initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Tested-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* / / ARM: highbank: mask cluster id from cpu_logical_mapRob Herring2013-01-312-3/+4
|/ / | | | | | | | | | | | | | | With commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu id value may include the cluster id and is no longer 0-3, so we need to mask it now to get the right hard cpu index. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | ARM: highbank: save and restore L2 cache and GIC on suspendRob Herring2013-01-071-1/+18
| | | | | | | | | | | | | | This fixes suspend to RAM adding necessary save and restore of L2 and GIC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | ARM: highbank: add a power request clearRob Herring2013-01-071-0/+15
| | | | | | | | | | | | | | When we fail to power down, we need to clear out the power request. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | ARM: highbank: fix secondary boot and hotplugRob Herring2013-01-072-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit 384a290 (ARM: gic: use a private mapping for CPU target interfaces), wake-up IPIs now go to all cores as the gic cpu interface numbering may not follow core numbering. This broke secondary boot on highbank since the boot address was already set for all secondary cores, this caused all cores to boot before the kernel was ready. Fix this by moving the setting of the jump address to highbank_boot_secondary instead of highbank_smp_prepare_cpus and highbank_cpu_die. Also, clear the address when we boot. This prevents cores from booting before they are actually triggered and is also necessary to get suspend/resume to work. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* | ARM: highbank: fix typos with hignbank in power request functionsRob Herring2013-01-074-8/+8
|/ | | | | | | s/hignbank/highbank/ Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* Merge branch 'next/cam-samsung' of ↵Olof Johansson2012-11-301-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: Just adding camif gpio setup and clkdev. * 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers + Linux 3.7-rc6 Conflicts due to the 3.7-rc6 sync: arch/arm/mach-highbank/system.c include/linux/clk-provider.h, resolved as in other branches. Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: highbank: retry wfi on reset requestRob Herring2012-11-061-1/+2
| | | | | | | | | | | | | | | | | | In some cases, an interrupt can occur and prevent cause failure to enter wfi. This causes reset to hang. Retrying the wfi should be enough to prevent reset from hanging. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | Merge tag 'highbank-debugll-cleanup' of ↵Olof Johansson2012-11-214-46/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://sources.calxeda.com/kernel/linux into next/soc From Rob Herring: Use common debug_ll_init function and remove the static mapping code from mach-highbank. * tag 'highbank-debugll-cleanup' of git://sources.calxeda.com/kernel/linux: ARM: highbank: use common debug_ll_io_init ARM: implement debug_ll_io_init()
| * | ARM: highbank: use common debug_ll_io_initRob Herring2012-11-074-46/+2
| | | | | | | | | | | | | | | | | | | | | Remove the platform static mapping code for uart and use the common debug_ll_io_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | | ARM: highbank: add ifdef guards to core.hOlof Johansson2012-11-061-0/+5
|/ / | | | | | | | | | | | | | | | | | | | | | | Fixes build error due to multiple includes: In file included from arch/arm/mach-highbank/sysregs.h:23:0, from arch/arm/mach-highbank/system.c:20: arch/arm/mach-highbank/core.h:8:91: error: redefinition of 'highbank_lluart_map_io' In file included from arch/arm/mach-highbank/system.c:19:0: arch/arm/mach-highbank/core.h:8:91: note: previous definition of 'highbank_lluart_map_io' was here Signed-off-by: Olof Johansson <olof@lixom.net>
* | ARM: highbank: Add initial ECX-2000 supportRob Herring2012-10-312-1/+7
| | | | | | | | | | | | | | | | And initial Calxeda ECX-2000 SOC support. This adds Cortex-A15 peripherals and machine DT match name. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* | ARM: highbank: abstract out SCU usageRob Herring2012-10-316-29/+29
|/ | | | | | | | | | | | | In preparation for A15 support on ECX-2000, the direct calls to SCU registers must be conditional. The SCU power mode register is replaced by a custom register on ECX-2000. Rather than read the number of cores from the SCU, just hardcode it to 4. This removes one use of SCU and removes the need for the SCU to be statically mapped. The cpu initialization will ultimately come from DT. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* Merge branch 'for-v3.7' of ↵Linus Torvalds2012-10-021-0/+52
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and DMA-mapping updates from Marek Szyprowski: "This time the pull request is rather small, because the further redesign patches were not ready on time. This pull request consists of the patches which extend ARM DMA-mapping subsystem with support for CPU coherent (ACP) DMA busses. The first client of the new version is HighBank SATA driver. The second part of the pull request includes various cleanup for both CMA common code and ARM DMA-mapping subsystem." Fix up trivial add-add conflict due to the "dma-coherent" DT property being added next to the "calxeda,port-phys" property for the Calxeda AHCI controller. * 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Remove unsed var at arm_coherent_iommu_unmap_page ARM: highbank: add coherent DMA setup ARM: kill off arch_is_coherent ARM: add coherent iommu dma ops ARM: add coherent dma ops ARM: dma-mapping: Refrain noisy console message ARM: dma-mapping: Small logical clean up drivers: dma-contiguous: refactor dma_alloc_from_contiguous()
| * ARM: highbank: add coherent DMA setupRob Herring2012-10-021-0/+52
| | | | | | | | | | | | | | | | Some highbank DMA masters can support coherent (ACP) or non-coherent DMA. This sets up dma_map_ops for masters which are configured for coherent DMA. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
* | Merge branch 'multiplatform/smp_ops' into next/multiplatformOlof Johansson2012-09-224-19/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * multiplatform/smp_ops: ARM: consolidate pen_release instead of having per platform definitions ARM: smp: Make SMP operations mandatory ARM: SoC: convert spear13xx to SMP operations ARM: SoC: convert imx6q to SMP operations ARM: SoC: convert highbank to SMP operations ARM: SoC: convert shmobile SMP to SMP operations ARM: SoC: convert ux500 to SMP operations ARM: SoC: convert MSM to SMP operations ARM: SoC: convert Exynos4 to SMP operations ARM: SoC: convert Tegra to SMP operations ARM: SoC: convert OMAP4 to SMP operations ARM: SoC: convert VExpress/RealView to SMP operations ARM: SoC: add per-platform SMP operations Conflicts due to file moves or removals in: arch/arm/mach-msm/board-msm8960.c arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to board file cleanup: arch/arm/mach-tegra/board-paz00.c Conflicts due to cpu hotplug addition: arch/arm/mach-tegra/hotplug.c Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: SoC: convert highbank to SMP operationsMarc Zyngier2012-09-144-19/+19
| |/ | | | | | | | | | | | | | | | | | | Convert the highbank platform to use struct smp_operations to provide its SMP and CPU hotplug operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | ARM: highbank: call highbank_pm_init from .init_machineRob Herring2012-09-203-3/+8
| | | | | | | | | | | | | | | | | | | | Being a module_init call, highbank_pm_init will cause problem with multi-platform build running on other platforms. Call it from .init_machine instead. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | ARM: initial multiplatform supportRob Herring2012-09-144-16/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This lets us build a multiplatform kernel for experimental purposes. However, it will not be useful for any real work, because it relies on a number of useful things to be disabled for now: * SMP support must be turned off because of conflicting symbols. Marc Zyngier has proposed a solution by adding a new SOC operations structure to hold indirect function pointers for these, but that work is currently stalled * We turn on SPARSE_IRQ unconditionally, which is not supported on most platforms. Each of them is currently in a different state, but most are being worked on. * A common clock framework is in place since v3.4 but not yet being used. Work on this is on its way. * DEBUG_LL for early debugging is currently disabled. * THUMB2_KERNEL does not work with allyesconfig because the kernel gets too big [Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, and socfpga are converted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Acked-by: Jamie Iles <jamie@jamieiles.com> Cc: Dinh Nguyen <dinguyen@altera.com>
* | ARM: highbank: move debug macros to include/debugRob Herring2012-09-141-19/+0
| | | | | | | | | | | | | | | | | | Move highbank debug-macro.S over to common debug macro directory. Also, remove v7 specific movw/movt instructions so this can compile under v6 mode. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | ARM: make mach/gpio.h headers optionalRob Herring2012-09-141-1/+0
|/ | | | | | | | | | | | | | | Most platforms don't need mach/gpio.h and it prevents multi-platform kernel images. Add CONFIG_NEED_MACH_GPIO_H and make platforns select it if they need gpio.h. This is platforms that define __GPIOLIB_COMPLEX or have lots of implicit includes pulled in by mach/gpio.h. at91 and omap have gpio clean-up pending and can drop CONFIG_NEED_MACH_GPIO_H once that is in. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-18 17:59:40 +0000