summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-orion
Commit message (Collapse)AuthorAgeFilesLines
* ARM: orion: Register DSA switch as a MDIO deviceFlorian Fainelli2017-02-072-8/+21
| | | | | | | | | | | | | | | | | Utilize the ability to pass board specific MDIO bus information towards a particular MDIO device thus allowing us to provide the per-port switch layout to the Marvell 88E6XXX switch driver. Since we would end-up with conflicting registration paths, do not register the "dsa" platform device anymore. Note that the MDIO devices registered by code in net/dsa/dsa2.c does not parse a dsa_platform_data, but directly take a dsa_chip_data (specific to a single switch chip), so we update the different call sites to pass this structure down to orion_ge00_switch_init(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM/orion/gpio: Replace three seq_printf() calls by seq_puts() in ↵Markus Elfring2016-10-171-3/+3
| | | | | | | | | | | | | orion_gpio_dbg_show() Strings which did not contain data format specifications should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: orion: simplify orion_ge00_switch_initArnd Bergmann2016-09-142-26/+3
| | | | | | | | | | | | | | | | | One of the last users of NO_IRQ on ARM is the switch initialization code on orion5x, which sometimes passes a GPIO based IRQ number. However, the driver doesn't actually use this number, and according to Andrew Lunn never will do it for non-DT based machines, so we can simply drop the irq argument. Simplifying it further, we can also drop the static platform_device and instead call platform_device_register_data(), which in turn lets us mark the platform_data structures as __initdata and slightly reduce the memory consumption. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu/orion: remove NO_IRQ check from device initArnd Bergmann2016-09-141-23/+29
| | | | | | | | | | | For most devices, we know in advance whether they have an interrupt line or not, so we can avoid passing NO_IRQ and instead split fill_resources() into two interfaces, with only the new fill_resources_irq() function taking an irq argument, which it then can use unconditionally. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mv78xx0: simplify ethernet device creationArnd Bergmann2016-09-142-10/+4
| | | | | | | | | | | | | Out of the four ethernet devices on mv78xx0, only the first one has an error interrupt line, for the other ones we pass NO_IRQ and then ignore the argument. In order to get closer to complete remove of NO_IRQ, this simply drops the unused function arguments. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2016-03-191-0/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ...
| * ARM: orion: implement ARM delay timerRussell King2016-01-261-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Implement an ARM delay timer to be used for udelay() on orion legacy platforms. This allows us to skip the delay loop calibration at boot. It also means that udelay() will be unaffected by CPU frequency changes when cpufreq is enabled on these platforms. Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: plat-orion: use gpiochip data pointerLinus Walleij2016-02-191-15/+9
|/ | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: orion: always use MULTI_IRQ_HANDLERArnd Bergmann2015-12-072-2/+0
| | | | | | | | | | | | As a preparation for multiplatform support, this enables the MULTI_IRQ_HANDLER code unconditionally on dove and orion5x, and introduces the respective code on mv78xx0, which did not have it so far. The classic entry-macro.S files are removed as they are now obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: orion: move watchdog setup to mach-orion5xArnd Bergmann2015-12-072-23/+0
| | | | | | | | | | | | | | | | The watchdog device node is created in plat-orion/common.c but depends on the bridge address that is platform specific, so as a preparation for orion multiplatform support, we move it out of the common code into orion5x and dove. At the moment, dove does not use the watchdog, so I'm marking the function as __maybe_unused for the moment. The compiler will be able to compile out the device definition this way, and we can easily add it later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* Merge tag 'mvebu-fixes-4.3-1' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann2015-10-141-1/+1
|\ | | | | | | | | | | | | | | | | Merge "mvebu fixes for 4.3 (part 1)" from Gregory CLEMENT: DSA fixes for orion platform * tag 'mvebu-fixes-4.3-1' of git://git.infradead.org/linux-mvebu: ARM: orion: Fix DSA platform device after mvmdio conversion
| * ARM: orion: Fix DSA platform device after mvmdio conversionFlorian Fainelli2015-10-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | DSA expects the host_dev pointer to be the device structure associated with the MDIO bus controller driver. First commit breaking that was c3a07134e6aa ("mv643xx_eth: convert to use the Marvell Orion MDIO driver"), and then, it got completely under the radar for a while. Reported-by: Frans van de Wiel <fvdw@fvdw.eu> Fixes: c3a07134e6aa ("mv643xx_eth: convert to use the Marvell Orion MDIO driver") CC: stable@vger.kernel.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | genirq: Remove irq argument from irq flow handlersThomas Gleixner2015-09-161-1/+1
|/ | | | | | | | | | | | | | Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
* Merge branch 'queue/irq/arm' of ↵Olof Johansson2015-08-051-4/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next/cleanup Merge "ARM: Interrupt cleanups and API change preparation" from Thomas Gleixner: The following patch series contains the following changes: - Consolidation of chained interrupt handler setup/removal - Switch to functions which avoid a redundant interrupt descriptor lookup - Preparation of interrupt flow handlers for the 'irq' argument removal * 'queue/irq/arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removal ARM/pxa: Prepare balloon3_irq_handler for irq argument removal ARM/pxa: Prepare *_irq_handler for irq argument removal ARM/dove: Prepare pmu_irq_handler for irq argument removal ARM/sa1111: Prepare sa1111_irq_handler for irq argument removal ARM/locomo: Prepare locomo_handler for irq argument removal ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc ARM/LPC32xx: Use irq_set_handler_locked() ARM/irq: Use access helper irq_data_get_affinity_mask() ARM/locomo: Consolidate chained IRQ handler install/remove ARM/orion: Consolidate chained IRQ handler install/remove Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removalThomas Gleixner2015-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. In this case the irq argument is shadowed by a local variable already, so just rename it. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Russell King <linux+kernel@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org
| * ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu2015-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * ARM/orion: Consolidate chained IRQ handler install/removeThomas Gleixner2015-07-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org
* | ARM/orion/time: Migrate to new 'set-state' interfaceViresh Kumar2015-07-171-45/+48
|/ | | | | | | | | | | | | | | Migrate orion driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* ARM: orion: use clkdev_create()Russell King2015-05-061-5/+1
| | | | | | | | clkdev_create() is a shorter way to write clkdev_alloc() followed by clkdev_add(). Use this instead. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds2014-12-102-2/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
| * Merge branch 'device-properties'Rafael J. Wysocki2014-12-082-2/+6
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * device-properties: leds: leds-gpio: Fix multiple instances registration without 'label' property leds: leds-gpio: Fix legacy GPIO number case ACPI / property: Drop size_prop from acpi_dev_get_property_reference() leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors ACPI / GPIO: Document ACPI GPIO mappings API net: rfkill: gpio: Add default GPIO driver mappings for ACPI ACPI / GPIO: Driver GPIO mappings for ACPI GPIOs input: gpio_keys_polled: Make use of device property API leds: leds-gpio: Make use of device property API gpio: Support for unified device properties interface Driver core: Unified interface for firmware node properties input: gpio_keys_polled: Add support for GPIO descriptors leds: leds-gpio: Add support for GPIO descriptors gpio: sch: Consolidate core and resume banks gpio / ACPI: Add support for _DSD device properties misc: at25: Make use of device property API ACPI: Allow drivers to match using Device Tree compatible property Driver core: Unified device properties interface for platform firmware ACPI: Add support for device specific properties
| | * leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptorsMika Westerberg2014-11-042-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 21f2aae91e902aad ("leds: leds-gpio: Add support for GPIO descriptors") already converted most of the driver to use GPIO descriptors. What is still missing is the platform specific hook gpio_blink_set() and board files which pass legacy GPIO numbers to this driver in platform data. In this patch we handle the former and convert gpio_blink_set() to take GPIO descriptor instead. In order to do this we convert the existing four users to accept GPIO descriptor and translate it to legacy GPIO number in the platform code. This effectively "pushes" legacy GPIO number usage from the driver to platforms. Also add comment to the remaining block describing that it is legacy code path and we are getting rid of it eventually. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | ARM: orion: convert the irq_reg_{readl,writel} calls to the new APIGregory CLEMENT2014-11-261-4/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | The commit "genirq: Generic chip: Change irq_reg_{readl,writel} arguments" modified the API. In the same tome the arch/arm/plat-orion/gpio.c file received a fix with the use of the old API: "ARM: orion: Fix for certain sequence of request_irq can cause irq storm". This commit fixes the use of the API. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/1416928752-24529-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* / ARM: orion: Fix for certain sequence of request_irq can cause irq stormEvgeniy Dushistov2014-11-011-4/+32
|/ | | | | | | | | | | | | | | | | | | | | | | | | The problem is that hardware handled by arm/plat-orion/gpio.c, require ack for edge irq, and no ack for level irq. The code handle this issue, by two "struct irq_chip_type" per one "struct irq_chip_generic". For one "struct irq_chip_generic" irq_ack pointer is setted, for another it is NULL. But we have only one mask_cache per two "struct irq_chip_type". So if we 1)unmask interrupt A for "edge type" trigger, 2)unmask interrupt B for "level type" trigger, 3)unmask interrupt C for "edge type", we, because of usage of generic irq_gc_mask_clr_bit/irq_gc_mask_set_bit, have hardware configured to trigger interrupt B on "edge type", because of shared mask_cache. But kernel think that B is "level type", so when interrupt B occur via "edge" reason, we don't ack it, and B triggered again and again. Signed-off-by: Evgeniy A. Dushistov <dushistov@mail.ru> Link: https://lkml.kernel.org/r/20140726155659.GA22977@fifteen Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* dsa: Replace mii_bus with a generic host deviceAlexander Duyck2014-09-151-1/+1
| | | | | | | | | | | | | This change makes it so that instead of passing and storing a mii_bus we instead pass and store a host_dev. From there we can test to determine the exact type of device, and can verify it is the correct device for our switch. So for example it would be possible to pass a device pointer from a pci_dev and instead of checking for a PHY ID we could check for a vendor and/or device ID. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM: orion: remove no longer needed gpio DT codeThomas Petazzoni2014-04-262-49/+0
| | | | | | | | | | | Following the move to pure DT-based probing of the GPIO controllers on Orion5x, some code in plat-orion/orion-gpio.c can be removed as it is no longer used. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-39-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: orion: remove no longer needed DT IRQ codeThomas Petazzoni2014-04-262-33/+0
| | | | | | | | | | | | Following the move of the Orion5x Device Tree support to use irqchip_init() for the interrupt controller probing, the plat-orion/irq.c code for DT-probing of the interrupt controller is no longer necessary, so we can get rid of it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-38-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: orion: switch to a per-platform handle_irq() functionThomas Petazzoni2014-04-261-45/+0
| | | | | | | | | | | | | | | | | | | | | | | | Moving to the Device Tree implies having CONFIG_MULTI_IRQ_HANDLER enabled, even for non-DT platforms (if we want both DT and non-DT platforms to be supported in a single kernel). However, the common CONFIG_MULTI_IRQ_HANDLER handler for non-DT platforms in plat-orion/irq.c doesn't match the needs of Orion5x. Also, it doesn't make much sense for orion_irq_init() to register the multi-IRQ handler: orion_irq_init() is called once for each IRQ cause/mask tuple, while the multi-IRQ handler only needs to be registered once. To solve this problem, we move the multi-IRQ handle in per-platform code: mach-kirkwood/irq.c and mach-dove/irq.c. The Orion5x variant will be introduced in a followup commit. Of course, this code will ultimately be completely removed once all boards are converted to the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-23-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'drivers-3.15' of ↵Linus Torvalds2014-04-051-4/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
| * watchdog: orion: Make RSTOUT register a separate resourceEzequiel Garcia2014-02-221-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support other SoC, it's required to distinguish the 'control' timer register, from the 'rstout' register that enables system reset on watchdog expiration. To prevent a compatibility break, this commit adds a fallback to a hardcoded RSTOUT address. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Tested-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: orion: Move cache-feroceon-l2.h out of plat-orionAndrew Lunn2014-02-221-11/+0
|/ | | | | | | | | | | With the gradual move to DT, kirkwood has become a lot less dependent on plat-orion. cache-feroceon-l2.h is the last dependency. Move it out so we can drop plat-orion when building DT only kirkwood boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson2014-01-311-0/+47
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLERSebastian Hesselbarth2014-01-161-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip driver. As expected for irqchip drivers, it uses a C-style interrupt handler and therefore selects MULTI_IRQ_HANDLER. Now, compiling a kernel with both non-DT and DT support enabled, selecting MULTI_IRQ_HANDLER will break ASM irq handler used by non-DT boards. Therefore, we provide a C-style irq handler even for non-DT boards, if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler in orion_irq_init this is transparent to all non-DT board files. While the regression report was filed on Marvell Kirkwood, also Marvell Dove non-DT boards are affected and fixed by this patch. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Reported-by: Ian Campbell <ijc@hellion.org.uk> Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource") Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | Merge tag 'soc-for-linus' of ↵Linus Torvalds2014-01-231-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
| * | ARM: orion: Switch to sched_clock_register()Stephen Boyd2013-11-211-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Kevin Hilman <khilman@linaro.org>
* | ARM: Orion: Add missing includesAndrew Lunn2013-11-242-4/+6
| | | | | | | | | | | | | | | | Building with C=1 generates warnings because of missing includes and static keywords. Add them. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | arm: plat-orion: remove deprecated IRQF_DISABLEDMichael Opdenacker2013-11-231-1/+1
|/ | | | | | | | | This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: plat-orion: add reg offset to DT irq driver stubSebastian Hesselbarth2013-07-251-1/+1
| | | | | | | | | | With irqchip driver for Orion SoCs, reg layout of orion-intc has changed. This updates irq driver stub implemented before to the new reg layout by adding an offset to the base address passed by DT node. As orion5x still uses this stub, it cannot be removed yet. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2013-07-061-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
| * Merge branch 'timers/posix-cpu-timers-for-tglx' ofThomas Gleixner2013-07-042-6/+7
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core Frederic sayed: "Most of these patches have been hanging around for several month now, in -mmotm for a significant chunk. They already missed a few releases." Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | sched_clock: Make ARM's sched_clock generic for all architecturesStephen Boyd2013-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
* | | drivers/dma: remove unused support for MEMSET operationsBartlomiej Zolnierkiewicz2013-07-031-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have never been any real users of MEMSET operations since they have been introduced in January 2007 by commit 7405f74badf4 ("dmaengine: refactor dmaengine around dma_async_tx_descriptor"). Therefore remove support for them for now, it can be always brought back when needed. [sebastian.hesselbarth@gmail.com: fix drivers/dma/mv_xor] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Acked-by: Dan Williams <djbw@fb.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | arm: orion: Use irq_get_trigger_type() to get IRQ flagsJavier Martinez Canillas2013-06-251-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use irq_get_trigger_type() to get the IRQ trigger type flags instead calling irqd_get_trigger_type(irq_get_irq_data(irq)) Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1371228049-27080-6-git-send-email-javier.martinez@collabora.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | ARM: plat-orion: Fix num_resources and id for ge10 and ge11Gregory CLEMENT2013-05-201-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.0.x Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: plat-orion: add missing ehci include to common.hSebastian Hesselbarth2013-05-131-0/+1
|/ | | | | | | | | Removing orion ehci include from board files will raise a compiler error because plat/common.h is using an enum provided by orion ehci but not including the include itself. This just adds the missing include. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2013-05-092-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
| * Remove GENERIC_GPIO config optionAlexandre Courbot2013-04-161-1/+1
| | | | | | | | | | | | | | | | | | | | GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * arm: plat-orion: use GPIO driver on CONFIG_GPIOLIBAlexandre Courbot2013-03-201-1/+1
| | | | | | | | | | | | | | | | | | The GPIO driver uses gpiolib, thus it should be compiled when CONFIG_GPIOLIB is defined and not only CONFIG_GENERIC_GPIO Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge tag 'soc-for-linus-3' of ↵Linus Torvalds2013-05-073-184/+59
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
| * | arm: plat-orion: remove addr-map codeThomas Petazzoni2013-04-151-178/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that all Marvell EBU platforms have been converted to use the mvebu-mbus driver, we can remove the common plat-orion/addr-map.c code that isn't compiled anymore. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-01 11:43:19 +0000