summaryrefslogtreecommitdiffstats
path: root/arch/avr32/mach-at32ap
Commit message (Collapse)AuthorAgeFilesLines
* AVR32-pio: Replace two seq_printf() calls by seq_puts() in pio_bank_show()Markus Elfring2016-12-121-2/+2
| | | | | | | | | Strings which did not contain data format specifications should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
* AVR32-pio: Use seq_putc() in pio_bank_show()Markus Elfring2016-12-121-1/+1
| | | | | | | | | A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
* AVR32-clock: Combine nine seq_printf() calls into one call in clk_show()Markus Elfring2016-12-121-9/+19
| | | | | | | Some data were printed into a sequence by nine separate function calls. Print the same data by a single function call instead. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
* AVR32-clock: Use seq_putc() in two functionsMarkus Elfring2016-12-121-3/+2
| | | | | | | | | A single character (line break) should be put into two sequences. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
* avr32: off by one in at32_init_pio()Dan Carpenter2016-07-291-1/+1
| | | | | | | | The pio_dev[] array has MAX_NR_PIO_DEVICES elements so the > should be >=. Fixes: 5f97f7f9400d ('[PATCH] avr32 architecture') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
* dmaengine: dw: rename masters to reflect actual topologyAndy Shevchenko2016-04-131-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | The source and destination masters are reflecting buses or their layers to where the different devices can be connected. The patch changes the master names to reflect which one is related to which independently on the transfer direction. The outcome of the change is that the memory data width is now always limited by a data width of the master which is dedicated to communicate to memory. The patch will not break anything since all current users have the same data width for all masters. Though it would be nice to revisit avr32 platforms to check what is the actual hardware topology in use there. It seems that it has one bus and two masters on it as stated by Table 8-2, that's why everything works independently on the master in use. The purpose of the sequential patch is to fix the driver for configuration of more than one bus. The change is done in the assumption that src_master and dst_master are reflecting a connection to the memory and peripheral correspondently on avr32 and otherwise on the rest. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* gpio: Include linux/gpio.h instead of asm/gpio.hBjorn Helgaas2016-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | | Most arches have an asm/gpio.h that merely includes linux/gpio.h. The others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected, linux/gpio.h includes asm/gpio.h. Therefore, code should include linux/gpio.h instead of including asm/gpio.h directly. Remove includes of asm/gpio.h, adding an include of linux/gpio.h when necessary. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2016-01-181-8/+23
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32 Pull AVR32 updates from Hans-Christian Noren Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: mmc: atmel: get rid of struct mci_dma_data mmc: atmel-mci: restore dma on AVR32 avr32: wire up missing syscalls avr32: wire up accept4 syscall
| * mmc: atmel: get rid of struct mci_dma_dataMans Rullgard2016-01-141-11/+10
| | | | | | | | | | | | | | | | | | | | | | As struct mci_dma_data is now only used by AVR32, it is nothing but pointless indirection. Replace it with struct dw_dma_slave in the AVR32 platform code and with a void pointer elsewhere. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: atmel-mci: restore dma on AVR32Mans Rullgard2016-01-141-0/+16
| | | | | | | | | | | | | | | | | | | | | | Commit ecb89f2f5f3e7 ("mmc: atmel-mci: remove compat for non DT board when requesting dma chan") broke dma on AVR32 and any other boards not using DT. This restores a fallback mechanism for such cases. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
* | avr32: gpio: use gpiochip data pointerLinus Walleij2016-01-071-6/+6
| | | | | | | | | | | | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: change member .dev to .parentLinus Walleij2015-11-191-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2015-11-101-8/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: "This time we have a very typical update which is mostly fixes and updates to drivers and no new drivers. - the biggest change is coming from Peter for edma cleanup which even caused some last minute regression, things seem settled now - idma64 and dw updates - iotdma updates - module autoload fixes for various drivers - scatter gather support for hdmac" * tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (77 commits) dmaengine: edma: Add dummy driver skeleton for edma3-tptc Revert "ARM: DTS: am33xx: Use the new DT bindings for the eDMA3" Revert "ARM: DTS: am437x: Use the new DT bindings for the eDMA3" dmaengine: dw: some Intel devices has no memcpy support dmaengine: dw: platform: provide platform data for Intel dmaengine: dw: don't override platform data with autocfg dmaengine: hdmac: Add scatter-gathered memset support dmaengine: hdmac: factorise memset descriptor allocation dmaengine: virt-dma: Fix kernel-doc annotations ARM: DTS: am437x: Use the new DT bindings for the eDMA3 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 dmaengine: edma: New device tree binding dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx dmaengine: edma: Merge the of parsing functions dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot dmaengine: edma: Refactor the dma device and channel struct initialization dmaengine: edma: Get qDMA channel information from HW also dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_) ...
| * avr32: use dw_dmac autoconfigurationAndy Shevchenko2015-09-301-8/+1
| | | | | | | | | | | | | | | | | | | | | | Instead of hardcoding a platform data for dw_dmac let's use it's own autoconfiguration feature. Thus, remove hardcoded values. Tested on ATNGW100. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | genirq: Remove irq argument from irq flow handlersThomas Gleixner2015-09-162-2/+2
|/ | | | | | | | | | | | | | Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
* Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2015-09-012-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
| * avr32/irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu2015-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Link: http://lkml.kernel.org/r/20150713100606.527106283@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * avr32/at32ap: Use irq_set_handler_locked()Thomas Gleixner2015-07-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Link: http://lkml.kernel.org/r/20150713100606.448031045@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * avr32/at32ap: Consolidate chained IRQ handler install/removeThomas Gleixner2015-07-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Link: http://lkml.kernel.org/r/20150713100606.351640193@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | avr32: handle NULL as a valid clock objectAndy Shevchenko2015-07-271-1/+19
|/ | | | | | | | | Since NULL is used as valid clock object on optional clocks we have to handle this case in avr32 implementation as well. Fixes: e1824dfe0d8e (net: macb: Adjust tx_clk when link speed changes) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
* avr32/at32ap: Fix race in installing chained IRQ handlerThomas Gleixner2015-06-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
* Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2015-02-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: "This update brings: - the big cleanup up by Maxime for device control and slave capabilities. This makes the API much cleaner. - new IMG MDC driver by Andrew - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with bunch of fixes on rcar drivers - odd fixes and updates spread over driver" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits) dmaengine: pl330: add DMA_PAUSE feature dmaengine: pl330: improve pl330_tx_status() function dmaengine: rcar-dmac: Disable channel 0 when using IOMMU dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR dmaengine: rcar-dmac: Fix spinlock issues in interrupt dmaenegine: edma: fix sparse warnings dmaengine: rcar-dmac: Fix uninitialized variable usage dmaengine: shdmac: extend PM methods dmaengine: shdmac: use SET_RUNTIME_PM_OPS() dmaengine: pl330: fix bug that cause start the same descs in cyclic dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers dmaengine: at_xdmac: simplify channel configuration stuff dmaengine: at_xdmac: introduce save_cc field dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel ioat: fail self-test if wait_for_completion times out dmaengine: dw: define DW_DMA_MAX_NR_MASTERS dmaengine: dw: amend description of dma_dev field dmatest: move src_off, dst_off, len inside loop ...
| * dmaengine: dw: define DW_DMA_MAX_NR_MASTERSAndy Shevchenko2015-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | Instead of using magic number in the code the patch provides DW_DMA_MAX_NR_MASTERS constant. While here, restrict the reading of data width array by amount of the actual number of AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | avr32: remove fake at91 cpu identificationAlexandre Belloni2015-02-091-25/+1
|/ | | | | | | | | cpu_is_at91* are not used in any driver outside mach-at91. Remove those useless definitions. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* avr32: remove mach/atmel-mci.hAlexandre Belloni2014-11-102-18/+1
| | | | | | | | | Use the generic platform_data header file instead of mach/atmel-mci.h Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* dmaengine: dw: convert dw_dma_slave to use explicit HS interfacesAndy Shevchenko2014-09-111-10/+5
| | | | | | | | | Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO strict user to provide handshake interfaces explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* avr32: at32ap700x: don't rely on default DMA mastersAndy Shevchenko2014-09-111-0/+2
| | | | | | | | | | In future we are going to remove the defaults of AHB masters from dw_dmac driver. It means each user have to supply proper source and destination masters by itself explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: dw: move dw_dmac.h to where it belongs toAndy Shevchenko2014-09-112-2/+2
| | | | | | | | | | | | | There is a common storage for platform data related structures and definitions inside kernel source tree. The patch moves file from include/linux to include/linux/platform_data and renames it acoordingly. The users are also updated. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [For the arch/avr32/.* and .*sound/atmel.*] Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* avr32/at32ap: switch to the generic PWM frameworkAlexandre Belloni2014-07-091-5/+2
| | | | | | | | Switch to the pwm/pwm-atmel driver instead of misc/atmel_pwm Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* avr32: pm: Fix section mismatchMatthias Brugger2013-12-101-1/+1
| | | | | | | | | | | | | | The power management has a section mismatch which leads to the following warning during compilation: WARNING: arch/avr32/mach-at32ap/built-in.o(.text+0x16d4): Section mismatch in reference from the function avr32_pm_offset() to the function .init.text:pm_exception() The function avr32_pm_offset() references the function __init pm_exception(). Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
* video: atmel_lcdfb: fix platform data structJean-Christophe PLAGNIOL-VILLARD2013-09-272-6/+6
| | | | | | | | Today we mix pdata and drivers data in the struct atmel_lcdfb_info Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* mtd: atmel_nand: replace cpu_is_at32ap7000() with a nand platform dataJosh Wu2013-08-051-0/+3
| | | | | | | | | | | | | | | | The nand driver use cpu_is_at32ap7000() macro for a workaround. For the multi-platform support, we will remove this cpu_is_xxx() macro. This patch adds a boolean variable need_reset_workaround in structure atmel_nand_data. Using this variable we can remove cpu_is_at32ap7000() macro. Hans-Christian: Feel free to push this through the mtd tree, if they won't accept it I'm working on getting my workflow up on the linux-avr32.git tree. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* avr32: atmel_default_console_device depends on CONFIG_SERIAL_ATMELGeert Uytterhoeven2013-06-161-0/+2
| | | | | | | | | | allnoconfig: arch/avr32/mach-at32ap/built-in.o: In function `at32_select_gpio': (.init.text+0x548): undefined reference to `atmel_default_console_device' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
* Merge tag 'drivers-for-linus' of ↵Linus Torvalds2013-05-041-2/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
| * ARM: at91/avr32/atmel_lcdfb: add platform device-id tableJohan Hovold2013-03-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add platform device-id table in order to identify the controller and determine its configuration. The currently used configuration parameters are: have_alt_pixclock - SOC uses an alternate pixel-clock calculation formula (at91sam9g45 non-ES) have_hozval - SOC has a HOZVAL field in LCDFRMCFG which is used to determine the linesize for STN displays (at91sam9261, at921sam9g10 and at32ap) have_intensity_bit - SOC uses IBGR:555 rather than BGR:565 16-bit pixel layout (at91sam9261, at91sam9263 and at91sam9rl) This allows us to remove all the remaining uses of cpu_is macros from the driver. Tested on at91sam9263 and at91sam9g45, compile-tested for other AT91-SOCs, and untested for AVR32. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| * ARM: at91/avr32/atmel_lcdfb: add bus-clock entryJohan Hovold2013-03-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add hclk entry for the atmel_lcdfb bus clock. On at91sam9261, at91sam9g10 and at32ap the bus clock has to be enabled as well as the peripheral clock. Add the appropriate lookup entries to these SOCs and fake clocks to the SOCs that do not use it. This allows us to get rid of the conditional enabling of the clocks in the driver which relied on the cpu_is macros. Tested on at91sam9263 and at91sam9g45, compile-tested for other AT91-SOCs, and untested for AVR32. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds2013-04-302-125/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
| * | cpufreq: AVR32: move cpufreq driver to drivers/cpufreqViresh Kumar2013-04-102-124/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves cpufreq driver of AVR32 based at32ap platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | cpufreq: Notify all policy->cpus in cpufreq_notify_transition()Viresh Kumar2013-04-021-3/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | policy->cpus contains all online cpus that have single shared clock line. And their frequencies are always updated together. Many SMP system's cpufreq drivers take care of this in individual drivers but the best place for this code is in cpufreq core. This patch modifies cpufreq_notify_transition() to notify frequency change for all cpus in policy->cpus and hence updates all users of this API. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* / avr32: Use generic idle loopThomas Gleixner2013-04-082-31/+0
|/ | | | | | | | | | | | | | | Also replace the idle poll enforcement by the generic functionality. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Link: http://lkml.kernel.org/r/20130321215233.950290809@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* atmel: move ATMEL_MAX_UART to platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD2012-11-191-1/+0
| | | | | | | | | Modify both AT91 and AVR32 platforms. Use 7 for it as the sam9260 or the sam9g25 have 7 of them DBGU included. Reported-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* arm: at91: move platfarm_data to include/linux/platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD2012-11-061-7/+0
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
* dw_dmac: autoconfigure data_width or get it via platform dataAndy Shevchenko2012-09-271-0/+2
| | | | | | | | | | Not all of the controllers support the 64 bit data width. Make it configurable via platform data. The driver will try to get a value from the component parameters, otherwise it will use the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* dw_dmac: autoconfigure block_size or use platform dataAndy Shevchenko2012-09-271-0/+1
| | | | | | | | | | The maximum block size is a configurable parameter for the chip. So, driver will try to get it from the encoded component parameters. Otherwise it will come from the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* avr32: fix build failures from mis-naming of atmel_nand.hPaul Gortmaker2012-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bf4289cba02b ("ATMEL: fix nand ecc support") indicated that it wanted to "Move platform data to a common header include/linux/platform_data/atmel_nand.h" and the new header even had re-include protectors with: #ifndef __ATMEL_NAND_H__ However, the file that was added was simply called atmel.h and this caused avr32 defconfig to fail with: In file included from arch/avr32/boards/atstk1000/setup.c:22: arch/avr32/mach-at32ap/include/mach/board.h:10:44: error: linux/platform_data/atmel_nand.h: No such file or directory In file included from arch/avr32/boards/atstk1000/setup.c:22: arch/avr32/mach-at32ap/include/mach/board.h:121: warning: 'struct atmel_nand_data' declared inside parameter list arch/avr32/mach-at32ap/include/mach/board.h:121: warning: its scope is only this definition or declaration, which is probably not what you want make[2]: *** [arch/avr32/boards/atstk1000/setup.o] Error 1 It seems the scope of the file contents will expand beyond just nand, so ignore the original intention, and fix up the users who reference the bad name with the _nand suffix. CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> CC: David Woodhouse <dwmw2@infradead.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2012-03-292-20/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
| * dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changesViresh Kumar2012-02-222-20/+0
| | | | | | | | | | | | | | | | | | There are few existing user drivers of dw_dmac. They will break as soon as we remove unused fields from struct dw_dma_slave. This patch focuses to fix these user drivers to use dma_slave_config() routine. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* | Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds2012-03-281-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
| * | Disintegrate asm/system.h for AVR32David Howells2012-03-281-1/+0
| |/ | | | | | | | | | | | | Disintegrate asm/system.h for AVR32. This has not been compiled at all. Signed-off-by: David Howells <dhowells@redhat.com> cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
* | ATMEL: fix nand ecc supportJean-Christophe PLAGNIOL-VILLARD2012-03-151-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc and hardware). Set ecc mode in the boards to soft as currently in the driver. Move platform data to a common header include/linux/platform_data/atmel_nand.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: David Woodhouse <dwmw2@infradead.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-25 15:58:40 +0000