summaryrefslogtreecommitdiffstats
path: root/drivers/xen
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'stable/for-linus-3.11-rc3-tag' of ↵Linus Torvalds2013-07-314-26/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Konrad Rzeszutek Wilk: - Three fixes for ARM/ARM64 to either compile or not certain generic drivers - Fix for avoiding a potential deadlock when an user space event channel is destroyed. - Fix a workqueue resuming multiple times. * tag 'stable/for-linus-3.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/tmem: do not allow XEN_TMEM on ARM64 xen/evtchn: avoid a deadlock when unbinding an event channel xen/arm: enable PV control for ARM xen/arm64: Don't compile cpu hotplug xenbus: frontend resume cleanup
| * xen/tmem: do not allow XEN_TMEM on ARM64Stefano Stabellini2013-07-301-1/+1
| | | | | | | | | | | | | | | | tmem is not supported on arm or arm64 yet. Will revert this once the Xen hypervisor supports it. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * xen/evtchn: avoid a deadlock when unbinding an event channelDavid Vrabel2013-07-301-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unbinding an event channel (either with the ioctl or when the evtchn device is closed) may deadlock because disable_irq() is called with port_user_lock held which is also locked by the interrupt handler. Think of the IOCTL_EVTCHN_UNBIND is being serviced, the routine has just taken the lock, and an interrupt happens. The evtchn_interrupt is invoked, tries to take the lock and spins forever. A quick glance at the code shows that the spinlock is a local IRQ variant. Unfortunately that does not help as "disable_irq() waits for the interrupt handler on all CPUs to stop running. If the irq occurs on another VCPU, it tries to take port_user_lock and can't because the unbind ioctl is holding it." (from David). Hence we cannot depend on the said spinlock to protect us. We could make it a system wide IRQ disable spinlock but there is a better way. We can piggyback on the fact that the existence of the spinlock is to make get_port_user() checks be up-to-date. And we can alter those checks to not depend on the spin lock (as it's protected by u->bind_mutex in the ioctl) and can remove the unnecessary locking (this is IOCTL_EVTCHN_UNBIND) path. In the interrupt handler we cannot use the mutex, but we do not need it. "The unbind disables the irq before making the port user stale, so when you clear it you are guaranteed that the interrupt handler that might use that port cannot be running." (from David). Hence this patch removes the spinlock usage on the teardown path and piggybacks on disable_irq happening before we muck with the get_port_user() data. This ensures that the interrupt handler will never run on stale data. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: Expanded the commit description a bit]
| * xen/arm: enable PV control for ARMJulien Grall2013-07-291-2/+1
| | | | | | | | | | | | | | | | | | Enable lifecyle management (reboot, shutdown...) from the toolstack for ARM guests. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
| * xen/arm64: Don't compile cpu hotplugJulien Grall2013-07-291-1/+1
| | | | | | | | | | | | | | | | | | On ARM64, when CONFIG_XEN=y, the compilation will fail because CPU hotplug is not yet supported with XEN. For now, disable it. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
| * xenbus: frontend resume cleanupAurelien Chartier2013-07-291-3/+16
| | | | | | | | | | | | | | | | | | | | | | Only create the delayed resume workqueue if we are running in the same domain as xenstored and issue a warning if the workqueue creation fails. Move the work initialization to the device probe so it is done only once. Signed-off-by: Aurelien Chartier <aurelien.chartier@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
* | drivers: delete __cpuinit usage from all remaining drivers filesPaul Gortmaker2013-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the remaining one-off uses of the __cpuinit macros from all C files in the drivers/* directory. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2013-07-061-3/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
| * \ Merge branch 'timers/posix-cpu-timers-for-tglx' ofThomas Gleixner2013-07-0412-128/+126
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core Frederic sayed: "Most of these patches have been hanging around for several month now, in -mmotm for a significant chunk. They already missed a few releases." Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | | xen: Remove clock_was_set() call in the resume pathDavid Vrabel2013-06-281-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 359cdd3f866(xen: maintain clock offset over save/restore) added a clock_was_set() call into the xen resume code to propagate the system time changes. With the modified hrtimer resume code, which makes sure that all cpus are notified this call is not longer necessary. [ tglx: Separated it from the hrtimer change ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-2-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | | Merge branch 'akpm' (updates from Andrew Morton)Linus Torvalds2013-07-032-19/+6
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
| * | | | drivers: avoid format string in dev_set_nameKees Cook2013-07-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | mm: correctly update zone->managed_pagesJiang Liu2013-07-031-18/+5
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enhance adjust_managed_page_count() to adjust totalhigh_pages for highmem pages. And change code which directly adjusts totalram_pages to use adjust_managed_page_count() because it adjusts totalram_pages, totalhigh_pages and zone->managed_pages altogether in a safe way. Remove inc_totalhigh_pages() and dec_totalhigh_pages() from xen/balloon driver bacause adjust_managed_page_count() has already adjusted totalhigh_pages. This patch also fixes two bugs: 1) enhances virtio_balloon driver to adjust totalhigh_pages when reserve/unreserve pages. 2) enhance memory_hotplug.c to adjust totalhigh_pages when hot-removing memory. We still need to deal with modifications of totalram_pages in file arch/powerpc/platforms/pseries/cmm.c, but need help from PPC experts. [akpm@linux-foundation.org: remove ifdef, per Wanpeng Li, virtio_balloon.c cleanup, per Sergei] [akpm@linux-foundation.org: export adjust_managed_page_count() to modules, for drivers/virtio/virtio_balloon.c] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge tag 'stable/for-linus-3.11-rc0-tag-two' of ↵Linus Torvalds2013-07-0333-198/+221
|\ \ \ \ | |/ / / |/| | / | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bugfixes from Konrad Rzeszutek Wilk: - Fix memory leak when CPU hotplugging. - Compile bugs with various #ifdefs - Fix state changes in Xen PCI front not dealing well with new toolstack. - Cleanups in code (use pr_*, fix 80 characters splits, etc) - Long standing bug in double-reporting the steal time * tag 'stable/for-linus-3.11-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/time: remove blocked time accounting from xen "clockchip" xen: Convert printks to pr_<level> xen: ifdef CONFIG_HIBERNATE_CALLBACKS xen_*_suspend xen/pcifront: Deal with toolstack missing 'XenbusStateClosing' state. xen/time: Free onlined per-cpu data structure if we want to online it again. xen/time: Check that the per_cpu data structure has data before freeing. xen/time: Don't leak interrupt name when offlining. xen/time: Encapsulate the struct clock_event_device in another structure. xen/spinlock: Don't leak interrupt name when offlining. xen/smp: Don't leak interrupt name when offlining. xen/smp: Set the per-cpu IRQ number to a valid default. xen/smp: Introduce a common structure to contain the IRQ name and interrupt line. xen/smp: Coalesce the free_irq calls in one function. xen-pciback: fix error return code in pcistub_irq_handler_switch()
| * | xen: Convert printks to pr_<level>Joe Perches2013-06-2833-194/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert printks to pr_<level> (excludes printk(KERN_DEBUG...) to be more consistent throughout the xen subsystem. Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME Coalesce formats and add missing word spaces Add missing newlines Align arguments and reflow to 80 columns Remove DRV_NAME from formats as pr_fmt adds the same content This does change some of the prefixes of these messages but it also does make them more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * | xen: ifdef CONFIG_HIBERNATE_CALLBACKS xen_*_suspendStefano Stabellini2013-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xen_hvm_post_suspend, xen_pre_suspend, xen_post_suspend are only used if CONFIG_HIBERNATE_CALLBACKS is defined, resulting in: drivers/xen/manage.c:46:13: warning: ‘xen_hvm_post_suspend’ defined but not used [-Wunused-function] drivers/xen/manage.c:52:13: warning: ‘xen_pre_suspend’ defined but not used [-Wunused-function] drivers/xen/manage.c:59:13: warning: ‘xen_post_suspend’ defined but not used [-Wunused-function] If the kernel config is missing CONFIG_HIBERNATE_CALLBACKS. Simply ifdef CONFIG_HIBERNATE_CALLBACKS the three functions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * | xen-pciback: fix error return code in pcistub_irq_handler_switch()Wei Yongjun2013-06-101-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return -ENOENT in the pcistub_device_find() and pci_get_drvdata() error handling case instead of 0(overwrite to 0 by str_to_slot()), as done elsewhere in this function. Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | xen/tmem: Don't over-write tmem_frontswap_poolid after tmem_frontswap_init ↵Konrad Rzeszutek Wilk2013-06-101-2/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set it. Commit 10a7a0771399a57a297fca9615450dbb3f88081a ("xen: tmem: enable Xen tmem shim to be built/loaded as a module") allows the tmem module to be loaded any time. For this work the frontswap API had to be able to asynchronously to call tmem_frontswap_init before or after the swap image had been set. That was added in git commit 905cd0e1bf9ffe82d6906a01fd974ea0f70be97a ("mm: frontswap: lazy initialization to allow tmem backends to build/run as modules"). Which means we could do this (The common case): modprobe tmem [so calls frontswap_register_ops, no ->init] modifies tmem_frontswap_poolid = -1 swapon /dev/xvda1 [__frontswap_init, calls -> init, tmem_frontswap_poolid is < 0 so tmem hypercall done] Or the failing one: swapon /dev/xvda1 [calls __frontswap_init, sets the need_init bitmap] modprobe tmem [calls frontswap_register_ops, -->init calls, finds out tmem_frontswap_poolid is 0, does not make a hypercall. Later in the module_init, sets tmem_frontswap_poolid=-1] Which meant that in the failing case we would not call the hypercall to initialize the pool and never be able to make any frontswap backend calls. Moving the frontswap_register_ops after setting the tmem_frontswap_poolid fixes it. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Bob Liu <bob.liu@oracle.com>
* | xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvmWei Liu2013-05-291-2/+3
| | | | | | | | | | | | | | | | | | Apparently we should not free page that has not been allocated. This is b/c alloc_xenballooned_pages will take care of freeing the page on its own. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen-pciback: more uses of cached MSI-X capability offsetJan Beulich2013-05-291-2/+2
| | | | | | | | | | Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xenbus: save xenstore local status for later useAurelien Chartier2013-05-293-15/+20
| | | | | | | | | | | | | | | | | | | | | | Save the xenstore local status computed in xenbus_init. It can then be used later to check if xenstored is running in this domain. Signed-off-by: Aurelien Chartier <aurelien.chartier@citrix.com> [Changes in v4: - Change variable name to xen_store_domain_type] Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xenbus: delay xenbus frontend resume if xenstored is not runningAurelien Chartier2013-05-291-1/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier <aurelien.chartier@citrix.com> [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xmem/tmem: fix 'undefined variable' build error.Frederico Cadete2013-05-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | In the (not so useful) kernel configuration where CONFIG_SWAP is undefined and CONFIG_XEN_SELFBALLOONING is defined, xen_tmem_init would use undefined variable 'static bool frontswap'. Added #else to have #define frontswap (0) in the case where CONFIG_FRONTSWAP is not defined. Signed-off-by: Frederico Cadete <frederico@cadete.eu> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen: Fixed assignment error in if statementLisa Nguyen2013-05-201-1/+2
| | | | | | | | | | | | | | Fixed assignment error in if statement in balloon.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/xenbus: Fixed over 80 character limit issueLisa Nguyen2013-05-201-1/+2
| | | | | | | | | | | | | | | | | | Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/xenbus: Fixed indentation error in switch caseLisa Nguyen2013-05-201-10/+8
| | | | | | | | | | | | | | | | Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off.Konrad Rzeszutek Wilk2013-05-152-9/+14
| | | | | | | | | | | | | | | | | | | | There is no point. We would just squeeze the guest to put more and more pages in the swap disk without any purpose. The only time it makes sense to use the selfballooning and shrinking is when frontswap is being utilized. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Remove the usage of '[no|]selfballoon' and use ↵Konrad Rzeszutek Wilk2013-05-152-26/+4
| | | | | | | | | | | | | | | | | | | | 'tmem.selfballooning' bool instead. As the 'tmem' driver is the one that actually sets whether it will use it (or not) so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool ↵Konrad Rzeszutek Wilk2013-05-152-14/+3
| | | | | | | | | | | | | | | | | | | | instead. As the 'tmem' driver is the one that actually sets whether it will use it or not so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Remove the boot options and fold them in the tmem.X parameters.Konrad Rzeszutek Wilk2013-05-151-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If tmem is built-in or a module, the user has the option on the command line to influence it by doing: tmem.<some option> instead of having a variety of "nocleancache", and "nofrontswap". The others: "noselfballooning" and "selfballooning"; and "noselfshrink" are in a different driver xen-selfballoon.c and the patches: xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the usage of 'noselfballoon','selfballoon' and use 'tmem.selfballon' bool instead. remove them. Also add documentation. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: s/disable_// and change the logic.Konrad Rzeszutek Wilk2013-05-151-14/+13
| | | | | | | | | | | | | | | | | | The variety of disable_[cleancache|frontswap|selfshrinking] are making this a bit complex. Just remove the "disable_" part and change the logic around for the "nofrontswap" and "nocleancache" parameters. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Fix compile warning.Konrad Rzeszutek Wilk2013-05-151-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | We keep on getting: drivers/xen/tmem.c:65:13: warning: ‘disable_frontswap_selfshrinking’ defined but not used [-Wunused-variable] if CONFIG_FRONTSWAP=y and # CONFIG_CLEANCACHE is not set Found by 0 day test project Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Split out the different module/boot options.Konrad Rzeszutek Wilk2013-05-151-3/+8
| | | | | | | | | | | | | | | | | | There are three options - depending on what combination of CONFIG_FRONTSWAP, CONFIG_CLEANCACHE and CONFIG_XEN_SELFBALLOONING is used. Lets split them out nicely out in three groups to make it easier to clean up. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Move all of the boot and module parameters to the top of the file.Konrad Rzeszutek Wilk2013-05-151-40/+45
| | | | | | | | | | | | Just code movement to see the different boot or module parameters. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen/tmem: Cleanup. Remove the parts that say temporary.Konrad Rzeszutek Wilk2013-05-151-4/+0
| | | | | | | | | | | | Frontswap is upstream, no need to having this #ifdef. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | Merge tag 'v3.10-rc1' into stable/for-linus-3.10Konrad Rzeszutek Wilk2013-05-154-29/+62
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 3.10-rc1 * tag 'v3.10-rc1': (12273 commits) Linux 3.10-rc1 [SCSI] qla2xxx: Update firmware link in Kconfig file. [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type [SCSI] pm80xx: thermal, sas controller config and error handling update [SCSI] pm80xx: NCQ error handling changes [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers [SCSI] pm80xx: Changed module name and debug messages update [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files [SCSI] pm80xx: MSI-X implementation for using 64 interrupts [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve [SCSI] pm80xx: Multiple inbound/outbound queue configuration [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC [SCSI] lpfc: fix up Kconfig dependencies [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd dm cache: set config value dm cache: move config fns dm thin: generate event when metadata threshold passed ...
| * Merge tag 'stable/for-linus-3.10-rc0-tag-two' of ↵Linus Torvalds2013-05-112-2/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
| * | zcache/tmem: Better error checking on frontswap_register_ops return value.Konrad Rzeszutek Wilk2013-04-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the past it either used to be NULL or the "older" backend. Now we also return -Exx error codes. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | xen: tmem: enable Xen tmem shim to be built/loaded as a moduleDan Magenheimer2013-04-303-19/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow Xen tmem shim to be built/loaded as a module. Xen self-ballooning and frontswap-selfshrinking are now also "lazily" initialized when the Xen tmem shim is loaded as a module, unless explicitly disabled by module parameters. Note runtime dependency disallows loading if cleancache/frontswap lazy initialization patches are not present. If built-in (not built as a module), the original mechanism of enabling via a kernel boot parameter is retained, but this should be considered deprecated. Note that module unload is explicitly not yet supported. [v1: Removed the [CLEANCACHE|FRONTSWAP]_HAS_LAZY_INIT ifdef] [v2: Squashed the xen/tmem: Remove the subsys call patch in] [akpm@linux-foundation.org: fix build (disable_frontswap_selfshrinking undeclared)] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | cleancache: Make cleancache_init use a pointer for the opsKonrad Rzeszutek Wilk2013-04-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using a backend_registered to determine whether a backend is enabled. This allows us to remove the backend_register check and just do 'if (cleancache_ops)' [v1: Rebase on top of b97c4b430b0a (ramster->zcache move] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | frontswap: make frontswap_init use a pointer for the opsKonrad Rzeszutek Wilk2013-04-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This simplifies the code in the frontswap - we can get rid of the 'backend_registered' test and instead check against frontswap_ops. [v1: Rebase on top of 703ba7fe5e0 (ramster->zcache move] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Merge tag 'stable/for-linus-3.10-rc0-tag' of ↵Linus Torvalds2013-04-292-37/+78
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen updates from Konrad Rzeszutek Wilk: "Features: - Populate the boot_params with EDD data. - Cleanups in the IRQ code. Bug-fixes: - CPU hotplug offline/online in PVHVM mode. - Re-upload processor PM data after ACPI S3 suspend/resume cycle." And Konrad gets a gold star for sending the pull request early when he thought he'd be away for the first week of the merge window (but because of 3.9 dragging out to -rc8 he then re-sent the reminder on the first day of the merge window anyway) * tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: resolve section mismatch warnings in xen-acpi-processor xen: Re-upload processor PM data to hypervisor after S3 resume (v2) xen/smp: Unifiy some of the PVs and PVHVM offline CPU path xen/smp/pvhvm: Don't initialize IRQ_WORKER as we are using the native one. xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM xen/spinlock: Check against default value of -1 for IRQ line. xen/time: Add default value of -1 for IRQ and check for that. xen/events: Check that IRQ value passed in is valid. xen/time: Fix kasprintf splat when allocating timer%d IRQ line. xen/smp/spinlock: Fix leakage of the spinlock interrupt line for every CPU online/offline xen/smp: Fix leakage of timer interrupt line for every CPU online/offline. xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND xen: drop tracking of IRQ vector x86/xen: populate boot_params with EDD data
| * \ \ Merge tag 'stable/for-linus-3.9-rc6-tag' of ↵Linus Torvalds2013-04-101-4/+15
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "Two bug-fixes: - Early bootup issue found on DL380 machines - Fix for the timer interrupt not being processed right awaym leading to quite delayed time skew on certain workloads" * tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables. xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.
| | * | | xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.Keir Fraser2013-04-021-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This avoids any other hardirq handler seeing a very stale jiffies value immediately after wakeup from a long idle period. The one observable symptom of this was a USB keyboard, with software keyboard repeat, which would always repeat a key immediately that it was pressed. This is due to the key press waking the guest, the key handler immediately runs, sees an old jiffies value, and then that jiffies value significantly updated, before the key is unpressed. Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Keir Fraser <keir.fraser@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | | xen/privcmd: fix condition in privcmd_close()Dan Carpenter2013-05-151-1/+1
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The parenthesis are in the wrong place so the original code is equivalent to: if (!xen_feature(XENFEAT_writable_descriptor_tables)) { ... Which obviously was not intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen: clear IRQ_NOAUTOEN and IRQ_NOREQUESTJulien Grall2013-05-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call irq_startup, that is responsible for calling irq_unmask at startup time. As a result event channels remain masked. The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init. On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit doesn't impact this architecture. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen: SWIOTLB is only used on x86Arnd Bergmann2013-05-081-1/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling SWIOTLB_XEN on ARM results in build errors because the underlying SWIOTLB is only available on X86: drivers/xen/swiotlb-xen.c: In function 'is_xen_swiotlb_buffer': drivers/xen/swiotlb-xen.c:105:2: error: implicit declaration of function 'mfn_to_local_pfn Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | xen: resolve section mismatch warnings in xen-acpi-processorBen Guthro2013-04-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following resolves a section mismatch warning below in xen-acpi-processor introduced by 3fac10145b766a2244422788f62dc35978613fd8 [13/13] xen: Re-upload processor PM data to hypervisor after S3 resume (v2) Warning: WARNING: drivers/xen/built-in.o(.text+0x2056a): Section mismatch in reference from the function xen_upload_processor_pm_data() to the function .init.text:read_acpi_id() The function xen_upload_processor_pm_data() references the function __init read_acpi_id(). This is often because xen_upload_processor_pm_data lacks a __init annotation or the annotation of read_acpi_id is wrong. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Guthro <benjamin.guthro@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | xen: Re-upload processor PM data to hypervisor after S3 resume (v2)Ben Guthro2013-04-171-25/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upon resume, it was found that ACPI C-states were missing from non-boot CPUs. This change registers a syscore_ops handler for this case, and re-uploads the PM information to the hypervisor to properly reset the C-state on these processors. v2: v1 did not go through the check_acpi_ids() code-path, and missed some cases when xen was running with the dom0_max_vcpus= command line parameter. Signed-Off-By: Ben Guthro <benjamin.guthro@citrix.com> [v3: Ate some tabs, s/printk/pr_info/] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | xen/events: Check that IRQ value passed in is valid.Konrad Rzeszutek Wilk2013-04-161-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | We naively assume that the IRQ value passed in is correct. If it is not, then any dereference operation for the 'info' structure will result in crash - so might as well guard ourselves and sprinkle copious amounts of WARN_ON. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-15 23:58:22 +0000