summaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAgeFilesLines
* ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock()Eric Ren2016-09-301-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The testcase "mmaptruncate" of ocfs2-test deadlocks occasionally. In this testcase, we create a 2*CLUSTER_SIZE file and mmap() on it; there are 2 process repeatedly performing the following operations respectively: one is doing memset(mmaped_addr + 2*CLUSTER_SIZE - 1, 'a', 1), while the another is playing ftruncate(fd, 2*CLUSTER_SIZE) and then ftruncate(fd, CLUSTER_SIZE) again and again. This is the backtrace when the deadlock happens: __wait_on_bit_lock+0x50/0xa0 __lock_page+0xb7/0xc0 ocfs2_write_begin_nolock+0x163f/0x1790 [ocfs2] ocfs2_page_mkwrite+0x1c7/0x2a0 [ocfs2] do_page_mkwrite+0x66/0xc0 handle_mm_fault+0x685/0x1350 __do_page_fault+0x1d8/0x4d0 trace_do_page_fault+0x37/0xf0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 In ocfs2_write_begin_nolock(), we first grab the pages and then allocate disk space for this write; ocfs2_try_to_free_truncate_log() will be called if -ENOSPC is returned; if we're lucky to get enough clusters, which is usually the case, we start over again. But in ocfs2_free_write_ctxt() the target page isn't unlocked, so we will deadlock when trying to grab the target page again. Also, -ENOMEM might be returned in ocfs2_grab_pages_for_write(). Another deadlock will happen in __do_page_mkwrite() if ocfs2_page_mkwrite() returns non-VM_FAULT_LOCKED, and along with a locked target page. These two errors fail on the same path, so fix them by unlocking the target page manually before ocfs2_free_write_ctxt(). Jan Kara helps me clear out the JBD2 part, and suggest the hint for root cause. Changes since v1: 1. Also put ENOMEM error case into consideration. Link: http://lkml.kernel.org/r/1474173902-32075-1-git-send-email-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: He Gang <ghe@suse.com> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus-4.8' of ↵Linus Torvalds2016-09-232-6/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Josef fixed a problem when quotas are enabled with his latest ENOSPC rework, and Jeff added more checks into the subvol ioctls to avoid tripping up lookup_one_len" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: ensure that file descriptor used with subvol ioctls is a dir Btrfs: handle quota reserve failure properly
| * btrfs: ensure that file descriptor used with subvol ioctls is a dirJeff Mahoney2016-09-211-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e70901d (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c6a (Btrfs: add snapshot/subvolume destroy ioctl) Cc: <stable@vger.kernel.org> #v2.6.29+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
| * Btrfs: handle quota reserve failure properlyJosef Bacik2016-09-211-6/+3
| | | | | | | | | | | | | | | | | | | | btrfs/022 was spitting a warning for the case that we exceed the quota. If we fail to make our quota reservation we need to clean up our data space reservation. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Tested-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
* | Merge tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfsLinus Torvalds2016-09-231-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | Pull configfs fix from Christoph Hellwig: "One more trivial fix for the binary attribute code from Phil Turnbull" * tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfs: configfs: Return -EFBIG from configfs_write_bin_file.
| * | configfs: Return -EFBIG from configfs_write_bin_file.Phil Turnbull2016-09-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for writing more than cb_max_size bytes does not 'goto out' so it is a no-op which allows users to vmalloc an arbitrary amount. Fixes: 03607ace807b ("configfs: implement binary attributes") Cc: stable@kernel.org Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* | | fs/proc/kcore.c: Add bounce buffer for ktext dataJiri Olsa2016-09-201-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We hit hardened usercopy feature check for kernel text access by reading kcore file: usercopy: kernel memory exposure attempt detected from ffffffff8179a01f (<kernel text>) (4065 bytes) kernel BUG at mm/usercopy.c:75! Bypassing this check for kcore by adding bounce buffer for ktext data. Reported-by: Steve Best <sbest@redhat.com> Fixes: f5509cc18daa ("mm: Hardened usercopy") Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | fs/proc/kcore.c: Make bounce buffer global for readJiri Olsa2016-09-201-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Next patch adds bounce buffer for ktext area, so it's convenient to have single bounce buffer for both vmalloc/module and ktext cases. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Revert "ocfs2: bump up o2cb network protocol version"Junxiao Bi2016-09-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 38b52efd218b ("ocfs2: bump up o2cb network protocol version"). This commit made rolling upgrade fail. When one node is upgraded to new version with this commit, the remaining nodes will fail to establish connections to it, then the application like VMs on the remaining nodes can't be live migrated to the upgraded one. This will cause an outage. Since negotiate hb timeout behavior didn't change without this commit, so revert it. Fixes: 38b52efd218bf ("ocfs2: bump up o2cb network protocol version") Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ocfs2: fix start offset to ocfs2_zero_range_for_truncate()Ashish Samant2016-09-191-10/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reported-by: Saar Maoz <saar.maoz@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ocfs2: fix double unlock in case retry after free truncate logJoseph Qi2016-09-191-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If ocfs2_reserve_cluster_bitmap_bits() fails with ENOSPC, it will try to free truncate log and then retry. Since ocfs2_try_to_free_truncate_log will lock/unlock global bitmap inode, we have to unlock it before calling this function. But when retry reserve and it fails with no global bitmap inode lock taken, it will unlock again in error handling branch and BUG. This issue also exists if no need retry and then ocfs2_inode_lock fails. So fix it. Fixes: 2070ad1aebff ("ocfs2: retry on ENOSPC if sufficient space in truncate log") Link: http://lkml.kernel.org/r/57D91939.6030809@huawei.com Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | fanotify: fix list corruption in fanotify_get_response()Jan Kara2016-09-193-39/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d4442bd5 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | fsnotify: add a way to stop queueing events on group shutdownJan Kara2016-09-192-1/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d4442bd5 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ocfs2: fix trans extend while free cached blocksJunxiao Bi2016-09-191-18/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The root cause of this issue is the same with the one fixed by the last patch, but this time credits for allocator inode and group descriptor may not be consumed before trans extend. The following error was caught: WARNING: CPU: 0 PID: 2037 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]() Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_netfront parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 2037 Comm: rm Tainted: G W 4.1.12-37.6.3.el6uek.bug24573128v2.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 Call Trace: dump_stack+0x48/0x5c warn_slowpath_common+0x95/0xe0 warn_slowpath_null+0x1a/0x20 start_this_handle+0x4c3/0x510 [jbd2] jbd2__journal_restart+0x161/0x1b0 [jbd2] jbd2_journal_restart+0x13/0x20 [jbd2] ocfs2_extend_trans+0x74/0x220 [ocfs2] ocfs2_free_cached_blocks+0x16b/0x4e0 [ocfs2] ocfs2_run_deallocs+0x70/0x270 [ocfs2] ocfs2_commit_truncate+0x474/0x6f0 [ocfs2] ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2] ocfs2_wipe_inode+0x136/0x6a0 [ocfs2] ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2] ocfs2_evict_inode+0x28/0x60 [ocfs2] evict+0xab/0x1a0 iput_final+0xf6/0x190 iput+0xc8/0xe0 do_unlinkat+0x1b7/0x310 SyS_unlinkat+0x22/0x40 system_call_fastpath+0x12/0x71 ---[ end trace a62437cb060baa71 ]--- JBD2: rm wants too many credits (149 > 128) Link: http://lkml.kernel.org/r/1473674623-11810-2-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ocfs2: fix trans extend while flush truncate logJunxiao Bi2016-09-191-19/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every time, ocfs2_extend_trans() included a credit for truncate log inode, but as that inode had been managed by jbd2 running transaction first time, it will not consume that credit until jbd2_journal_restart(). Since total credits to extend always included the un-consumed ones, there will be more and more un-consumed credit, at last jbd2_journal_restart() will fail due to credit number over the half of max transction credit. The following error was caught when unlinking a large file with many extents: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13626 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]() Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 13626 Comm: unlink Tainted: G W 4.1.12-37.6.3.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 Call Trace: dump_stack+0x48/0x5c warn_slowpath_common+0x95/0xe0 warn_slowpath_null+0x1a/0x20 start_this_handle+0x4c3/0x510 [jbd2] jbd2__journal_restart+0x161/0x1b0 [jbd2] jbd2_journal_restart+0x13/0x20 [jbd2] ocfs2_extend_trans+0x74/0x220 [ocfs2] ocfs2_replay_truncate_records+0x93/0x360 [ocfs2] __ocfs2_flush_truncate_log+0x13e/0x3a0 [ocfs2] ocfs2_remove_btree_range+0x458/0x7f0 [ocfs2] ocfs2_commit_truncate+0x1b3/0x6f0 [ocfs2] ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2] ocfs2_wipe_inode+0x136/0x6a0 [ocfs2] ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2] ocfs2_evict_inode+0x28/0x60 [ocfs2] evict+0xab/0x1a0 iput_final+0xf6/0x190 iput+0xc8/0xe0 do_unlinkat+0x1b7/0x310 SyS_unlink+0x16/0x20 system_call_fastpath+0x12/0x71 ---[ end trace 28aa7410e69369cf ]--- JBD2: unlink wants too many credits (251 > 128) Link: http://lkml.kernel.org/r/1473674623-11810-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ipc/shm: fix crash if CONFIG_SHMEM is not setKirill A. Shutemov2016-09-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c01d5b300774 ("shmem: get_unmapped_area align huge page") makes use of shm_get_unmapped_area() in shm_file_operations() unconditional to CONFIG_MMU. As Tony Battersby pointed this can lead NULL-pointer dereference on machine with CONFIG_MMU=y and CONFIG_SHMEM=n. In this case ipc/shm is backed by ramfs which doesn't provide f_op->get_unmapped_area for configurations with MMU. The solution is to provide dummy f_op->get_unmapped_area for ramfs when CONFIG_MMU=y, which just call current->mm->get_unmapped_area(). Fixes: c01d5b300774 ("shmem: get_unmapped_area align huge page") Link: http://lkml.kernel.org/r/20160912102704.140442-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Tony Battersby <tonyb@cybernetics.com> Tested-by: Tony Battersby <tonyb@cybernetics.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.7.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | autofs: use dentry flags to block walks during expireIan Kent2016-09-191-13/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Somewhere along the way the autofs expire operation has changed to hold a spin lock over expired dentry selection. The autofs indirect mount expired dentry selection is complicated and quite lengthy so it isn't appropriate to hold a spin lock over the operation. Commit 47be61845c77 ("fs/dcache.c: avoid soft-lockup in dput()") added a might_sleep() to dput() causing a WARN_ONCE() about this usage to be issued. But the spin lock doesn't need to be held over this check, the autofs dentry info. flags are enough to block walks into dentrys during the expire. I've left the direct mount expire as it is (for now) because it is much simpler and quicker than the indirect mount expire and adding spin lock release and re-aquires would do nothing more than add overhead. Fixes: 47be61845c77 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Takashi Iwai <tiwai@suse.de> Cc: Takashi Iwai <tiwai@suse.de> Cc: NeilBrown <neilb@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ocfs2/dlm: fix race between convert and migrationJoseph Qi2016-09-191-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery") checks if lockres master has changed to identify whether new master has finished recovery or not. This will introduce a race that right after old master does umount ( means master will change), a new convert request comes. In this case, it will reset lockres state to DLM_RECOVERING and then retry convert, and then fail with lockres->l_action being set to OCFS2_AST_INVALID, which will cause inconsistent lock level between ocfs2 and dlm, and then finally BUG. Since dlm recovery will clear lock->convert_pending in dlm_move_lockres_to_recovery_list, we can use it to correctly identify the race case between convert and recovery. So fix it. Fixes: ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.com Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2016-09-163-20/+42
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull cifs fixes from Steve French: "Small set of cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: Move check for prefix path to within cifs_get_root() Compare prepaths when comparing superblocks Fix memory leaks in cifs_do_mount()
| * | | Move check for prefix path to within cifs_get_root()Sachin Prabhu2016-09-091-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Tested-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com>
| * | | Compare prepaths when comparing superblocksSachin Prabhu2016-09-091-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fs/cifs: make share unaccessible at root level mountable makes use of prepaths when any component of the underlying path is inaccessible. When mounting 2 separate shares having different prepaths but are other wise similar in other respects, we end up sharing superblocks when we shouldn't be doing so. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Tested-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com>
| * | | Fix memory leaks in cifs_do_mount()Sachin Prabhu2016-09-093-14/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix memory leaks introduced by the patch fs/cifs: make share unaccessible at root level mountable Also move allocation of cifs_sb->prepath to cifs_setup_cifs_sb(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Tested-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com>
* | | | aio: mark AIO pseudo-fs noexecJann Horn2016-09-151-1/+6
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ensures that do_mmap() won't implicitly make AIO memory mappings executable if the READ_IMPLIES_EXEC personality flag is set. Such behavior is problematic because the security_mmap_file LSM hook doesn't catch this case, potentially permitting an attacker to bypass a W^X policy enforced by SELinux. I have tested the patch on my machine. To test the behavior, compile and run this: #define _GNU_SOURCE #include <unistd.h> #include <sys/personality.h> #include <linux/aio_abi.h> #include <err.h> #include <stdlib.h> #include <stdio.h> #include <sys/syscall.h> int main(void) { personality(READ_IMPLIES_EXEC); aio_context_t ctx = 0; if (syscall(__NR_io_setup, 1, &ctx)) err(1, "io_setup"); char cmd[1000]; sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'", (int)getpid()); system(cmd); return 0; } In the output, "rw-s" is good, "rwxs" is bad. Signed-off-by: Jann Horn <jann@thejh.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | vfs: cap dedupe request structure size at PAGE_SIZEDarrick J. Wong2016-09-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kirill A Shutemov reports that the kernel doesn't try to cap dest_count in any way, and uses the number to allocate kernel memory. This causes high order allocation warnings in the kernel log if someone passes in a big enough value. We should clamp the allocation at PAGE_SIZE to avoid stressing the VM. The two existing users of the dedupe ioctl never send more than 120 requests, so we can safely clamp dest_range at PAGE_SIZE, because with 4k pages we can handle up to 127 dedupe candidates. Given the max extent length of 16MB, we can end up doing 2GB of IO which is plenty. [ Note: the "offsetof()" can't overflow, because 'count' is just a 16-bit integer. That's not obvious in the limited context of the patch, so I'm noting it here because it made me go look. - Linus ] Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | vfs: fix return type of ioctl_file_dedupe_rangeDarrick J. Wong2016-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the VFS functions in the dedupe ioctl path return int status, so the ioctl handler ought to as well. Found by Coverity, CID 1350952. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'nfs-for-4.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2016-09-123-24/+44
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable patches: - We must serialise LAYOUTGET and LAYOUTRETURN to ensure correct state accounting - Fix the CREATE_SESSION slot number Bugfixes: - sunrpc: fix a UDP memory accounting regression - NFS: Fix an error reporting regression in nfs_file_write() - pNFS: Fix further layout stateid issues - RPC/rdma: Revert 3d4cf35bd4fa ("xprtrdma: Reply buffer exhaustion...") - RPC/rdma: Fix receive buffer accounting" * tag 'nfs-for-4.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Fix the CREATE_SESSION slot number accounting xprtrdma: Fix receive buffer accounting xprtrdma: Revert 3d4cf35bd4fa ("xprtrdma: Reply buffer exhaustion...") pNFS: Don't forget the layout stateid if there are outstanding LAYOUTGETs pNFS: Clear out all layout segments if the server unsets lrp->res.lrs_present pNFS: Fix pnfs_set_layout_stateid() to clear NFS_LAYOUT_INVALID_STID pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised NFS: Fix error reporting in nfs_file_write() sunrpc: fix UDP memory accounting
| * | NFSv4.1: Fix the CREATE_SESSION slot number accountingTrond Myklebust2016-09-111-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that we conform to the algorithm described in RFC5661, section 18.36.4 for when to bump the sequence id. In essence we do it for all cases except when the RPC call timed out, or in case of the server returning NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org
| * | pNFS: Don't forget the layout stateid if there are outstanding LAYOUTGETsTrond Myklebust2016-09-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there are outstanding LAYOUTGET rpc calls, then we want to ensure that we keep the layout stateid around so we that don't inadvertently pick up an old/misordered sequence id. The race is as follows: Client Server ====== ====== LAYOUTGET(seqid) LAYOUTGET(seqid) return LAYOUTGET(seqid+1) return LAYOUTGET(seqid+2) process LAYOUTGET(seqid+2) forget layout process LAYOUTGET(seqid+1) If it forgets the layout stateid before processing seqid+1, then the client will not check the layout->plh_barrier, and so will set the stateid with seqid+1. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
| * | pNFS: Clear out all layout segments if the server unsets lrp->res.lrs_presentTrond Myklebust2016-09-031-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | If the server fails to set lrp->res.lrs_present in the LAYOUTRETURN reply, then that means it believes the client holds no more layout state for that file, and that the layout stateid is now invalid. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
| * | pNFS: Fix pnfs_set_layout_stateid() to clear NFS_LAYOUT_INVALID_STIDTrond Myklebust2016-09-031-17/+19
| | | | | | | | | | | | | | | | | | | | | If the layout was marked as invalid, we want to ensure to initialise the layout header fields correctly. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
| * | pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialisedTrond Myklebust2016-09-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to RFC5661, the client is responsible for serialising LAYOUTGET and LAYOUTRETURN to avoid ambiguity. Consider the case where we send both in parallel. Client Server ====== ====== LAYOUTGET(seqid=X) LAYOUTRETURN(seqid=X) LAYOUTGET return seqid=X+1 LAYOUTRETURN return seqid=X+2 Process LAYOUTRETURN Forget layout stateid Process LAYOUTGET Set seqid=X+1 The client processes the layoutget/layoutreturn in the wrong order, and since the result of the layoutreturn was to clear the only existing layout segment, the client forgets the layout stateid. When the LAYOUTGET comes in, it is treated as having a completely new stateid, and so the client sets the wrong sequence id... Fix is to check if there are outstanding LAYOUTGET requests before we send the LAYOUTRETURN (note that LAYOUGET will already wait if it sees an outstanding LAYOUTRETURN). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
| * | NFS: Fix error reporting in nfs_file_write()Trond Myklebust2016-09-031-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | When doing O_DSYNC writes, the actual write errors are reported through generic_write_sync(), so we must test the result. Reported-by: J. R. Okajima <hooanon05g@gmail.com> Fixes: 18290650b1c8 ("NFS: Move buffered I/O locking into nfs_file_write()") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* | | Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds2016-09-101-0/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "nvdimm fixes for v4.8, two of them are tagged for -stable: - Fix devm_memremap_pages() to use track_pfn_insert(). Otherwise, DAX pmd mappings end up with an uncached pgprot, and unusable performance for the device-dax interface. The device-dax interface appeared in 4.7 so this is tagged for -stable. - Fix a couple VM_BUG_ON() checks in the show_smaps() path to understand DAX pmd entries. This fix is tagged for -stable. - Fix a mis-merge of the nfit machine-check handler to flip the polarity of an if() to match the final version of the patch that Vishal sent for 4.8-rc1. Without this the nfit machine check handler never detects / inserts new 'badblocks' entries which applications use to identify lost portions of files. - For test purposes, fix the nvdimm_clear_poison() path to operate on legacy / simulated nvdimm memory ranges. Without this fix a test can set badblocks, but never clear them on these ranges. - Fix the range checking done by dax_dev_pmd_fault(). This is not tagged for -stable since this problem is mitigated by specifying aligned resources at device-dax setup time. These patches have appeared in a next release over the past week. The recent rebase you can see in the timestamps was to drop an invalid fix as identified by the updated device-dax unit tests [1]. The -mm touches have an ack from Andrew" [1]: "[ndctl PATCH 0/3] device-dax test for recent kernel bugs" https://lists.01.org/pipermail/linux-nvdimm/2016-September/006855.html * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: allow legacy (e820) pmem region to clear bad blocks nfit, mce: Fix SPA matching logic in MCE handler mm: fix cache mode of dax pmd mappings mm: fix show_smap() for zone_device-pmd ranges dax: fix mapping size check
| * | | mm: fix show_smap() for zone_device-pmd rangesDan Williams2016-09-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attempting to dump /proc/<pid>/smaps for a process with pmd dax mappings currently results in the following VM_BUG_ONs: kernel BUG at mm/huge_memory.c:1105! task: ffff88045f16b140 task.stack: ffff88045be14000 RIP: 0010:[<ffffffff81268f9b>] [<ffffffff81268f9b>] follow_trans_huge_pmd+0x2cb/0x340 [..] Call Trace: [<ffffffff81306030>] smaps_pte_range+0xa0/0x4b0 [<ffffffff814c2755>] ? vsnprintf+0x255/0x4c0 [<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0 [<ffffffff8123c8a2>] walk_page_vma+0x62/0x80 [<ffffffff81307656>] show_smap+0xa6/0x2b0 kernel BUG at fs/proc/task_mmu.c:585! RIP: 0010:[<ffffffff81306469>] [<ffffffff81306469>] smaps_pte_range+0x499/0x4b0 Call Trace: [<ffffffff814c2795>] ? vsnprintf+0x255/0x4c0 [<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0 [<ffffffff8123c8a2>] walk_page_vma+0x62/0x80 [<ffffffff81307696>] show_smap+0xa6/0x2b0 These locations are sanity checking page flags that must be set for an anonymous transparent huge page, but are not set for the zone_device pages associated with dax mappings. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | | | Merge tag 'for_linus_stable' of ↵Linus Torvalds2016-09-103-21/+31
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull fscrypto fixes fromTed Ts'o: "Fix some brown-paper-bag bugs for fscrypto, including one one which allows a malicious user to set an encryption policy on an empty directory which they do not own" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: fscrypto: require write access to mount to set encryption policy fscrypto: only allow setting encryption policy on directories fscrypto: add authorization check for setting encryption policy
| * | | | fscrypto: require write access to mount to set encryption policyEric Biggers2016-09-103-22/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since setting an encryption policy requires writing metadata to the filesystem, it should be guarded by mnt_want_write/mnt_drop_write. Otherwise, a user could cause a write to a frozen or readonly filesystem. This was handled correctly by f2fs but not by ext4. Make fscrypt_process_policy() handle it rather than relying on the filesystem to get it right. Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs} Signed-off-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
| * | | | fscrypto: only allow setting encryption policy on directoriesEric Biggers2016-09-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FS_IOC_SET_ENCRYPTION_POLICY ioctl allowed setting an encryption policy on nondirectory files. This was unintentional, and in the case of nonempty regular files did not behave as expected because existing data was not actually encrypted by the ioctl. In the case of ext4, the user could also trigger filesystem errors in ->empty_dir(), e.g. due to mismatched "directory" checksums when the kernel incorrectly tried to interpret a regular file as a directory. This bug affected ext4 with kernels v4.8-rc1 or later and f2fs with kernels v4.6 and later. It appears that older kernels only permitted directories and that the check was accidentally lost during the refactoring to share the file encryption code between ext4 and f2fs. This patch restores the !S_ISDIR() check that was present in older kernels. Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
| * | | | fscrypto: add authorization check for setting encryption policyEric Biggers2016-09-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On an ext4 or f2fs filesystem with file encryption supported, a user could set an encryption policy on any empty directory(*) to which they had readonly access. This is obviously problematic, since such a directory might be owned by another user and the new encryption policy would prevent that other user from creating files in their own directory (for example). Fix this by requiring inode_owner_or_capable() permission to set an encryption policy. This means that either the caller must own the file, or the caller must have the capability CAP_FOWNER. (*) Or also on any regular file, for f2fs v4.6 and later and ext4 v4.8-rc1 and later; a separate bug fix is coming for that. Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs} Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* | | | | Merge branch 'for-linus' of ↵Linus Torvalds2016-09-091-3/+4
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fix from Miklos Szeredi: "This fixes a deadlock when fuse, direct I/O and loop device are combined" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: direct-io: don't dirty ITER_BVEC pages
| * | | | | fuse: direct-io: don't dirty ITER_BVEC pagesMiklos Szeredi2016-08-241-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When reading from a loop device backed by a fuse file it deadlocks on lock_page(). This is because the page is already locked by the read() operation done on the loop device. In this case we don't want to either lock the page or dirty it. So do what fs/direct-io.c does: only dirty the page for ITER_IOVEC vectors. Reported-by: Sheng Yang <sheng@yasker.org> Fixes: aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v4.1+ Reviewed-by: Sheng Yang <sheng@yasker.org> Reviewed-by: Ashish Samant <ashish.samant@oracle.com> Tested-by: Sheng Yang <sheng@yasker.org> Tested-by: Ashish Samant <ashish.samant@oracle.com>
* | | | | | Merge branch 'overlayfs-linus' of ↵Linus Torvalds2016-09-091-2/+2
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fix from Miklos Szeredi: "This fixes a regression caused by the last pull request" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix workdir creation
| * | | | | | ovl: fix workdir creationMiklos Szeredi2016-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Workdir creation fails in latest kernel. Fix by allowing EOPNOTSUPP as a valid return value from vfs_removexattr(XATTR_NAME_POSIX_ACL_*). Upper filesystem may not support ACL and still be perfectly able to support overlayfs. Reported-by: Martin Ziegler <ziegler@uni-freiburg.de> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: c11b9fdd6a61 ("ovl: remove posix_acl_default from workdir") Cc: <stable@vger.kernel.org>
* | | | | | | Merge branch 'for-linus-4.8' of ↵Linus Torvalds2016-09-093-8/+17
|\ \ \ \ \ \ \ | | |_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "I'm not proud of how long it took me to track down that one liner in btrfs_sync_log(), but the good news is the patches I was trying to blame for these problems were actually fine (sorry Filipe)" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns btrfs: do not decrease bytes_may_use when replaying extents
| * | | | | | Merge branch 'for-chris' of ↵Chris Mason2016-09-072-8/+16
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.8
| | * | | | | | btrfs: introduce tickets_id to determine whether asynchronous metadata ↵Wang Xiaoguang2016-09-062-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | reclaim work makes progress In btrfs_async_reclaim_metadata_space(), we use ticket's address to determine whether asynchronous metadata reclaim work is making progress. ticket = list_first_entry(&space_info->tickets, struct reserve_ticket, list); if (last_ticket == ticket) { flush_state++; } else { last_ticket = ticket; flush_state = FLUSH_DELAYED_ITEMS_NR; if (commit_cycles) commit_cycles--; } But indeed it's wrong, we should not rely on local variable's address to do this check, because addresses may be same. In my test environment, I dd one 168MB file in a 256MB fs, found that for this file, every time wait_reserve_ticket() called, local variable ticket's address is same, For above codes, assume a previous ticket's address is addrA, last_ticket is addrA. Btrfs_async_reclaim_metadata_space() finished this ticket and wake up it, then another ticket is added, but with the same address addrA, now last_ticket will be same to current ticket, then current ticket's flush work will start from current flush_state, not initial FLUSH_DELAYED_ITEMS_NR, which may result in some enospc issues(I have seen this in my test machine). Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
| | * | | | | | btrfs: do not decrease bytes_may_use when replaying extentsWang Xiaoguang2016-09-051-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When replaying extents, there is no need to update bytes_may_use in btrfs_alloc_logged_file_extent(), otherwise it'll trigger a WARN_ON about bytes_may_use. Fixes: ("btrfs: update btrfs_space_info's bytes_may_use timely") Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
| * | | | | | | Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returnsChris Mason2016-09-061-0/+1
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use a btrfs_log_ctx structure to pass information into the tree log commit, and get error values out. It gets added to a per log-transaction list which we walk when things go bad. Commit d1433debe added an optimization to skip waiting for the log commit, but didn't take root_log_ctx out of the list. This patch makes sure we remove things before exiting. Signed-off-by: Chris Mason <clm@fb.com> Fixes: d1433debe7f4346cf9fc0dafc71c3137d2a97bc4 cc: stable@vger.kernel.org # 3.15+
* | | | / / / ceph: do not modify fi->frag in need_reset_readdir()Nicolas Iooss2016-09-051-1/+1
| |_|_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f3c4ebe65ea1 ("ceph: using hash value to compose dentry offset") modified "if (fpos_frag(new_pos) != fi->frag)" to "if (fi->frag |= fpos_frag(new_pos))" in need_reset_readdir(), thus replacing a comparison operator with an assignment one. This looks like a typo which is reported by clang when building the kernel with some warning flags: fs/ceph/dir.c:600:22: error: using the result of an assignment as a condition without parentheses [-Werror,-Wparentheses] } else if (fi->frag |= fpos_frag(new_pos)) { ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ fs/ceph/dir.c:600:22: note: place parentheses around the assignment to silence this warning } else if (fi->frag |= fpos_frag(new_pos)) { ^ ( ) fs/ceph/dir.c:600:22: note: use '!=' to turn this compound assignment into an inequality comparison } else if (fi->frag |= fpos_frag(new_pos)) { ^~ != Fixes: f3c4ebe65ea1 ("ceph: using hash value to compose dentry offset") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
* | | | | | Merge branch 'for-linus-4.8' of ↵Linus Torvalds2016-09-033-11/+15
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "I'm still prepping a set of fixes for btrfs fsync, just nailing down a hard to trigger memory corruption. For now, these are tested and ready." * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix one bug that process may endlessly wait for ticket in wait_reserve_ticket() Btrfs: fix endless loop in balancing block groups Btrfs: kill invalid ASSERT() in process_all_refs()
| * | | | | btrfs: fix one bug that process may endlessly wait for ticket in ↵Wang Xiaoguang2016-09-011-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_reserve_ticket() If can_overcommit() in btrfs_calc_reclaim_metadata_size() returns true, btrfs_async_reclaim_metadata_space() will not reclaim metadata space, just return directly and also forget to wake up process which are waiting for their tickets, so these processes will wait endlessly. Fstests case generic/172 with mount option "-o compress=lzo" have revealed this bug in my test machine. Here if we have tickets to handle, we must handle them first. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-18 02:45:01 +0000