summaryrefslogtreecommitdiffstats
path: root/include/linux/mmc/core.h
Commit message (Collapse)AuthorAgeFilesLines
* mmc: core: rename mmc_start_req() to *areq()Linus Walleij2017-02-131-1/+1
| | | | | | | | | | | | | | With the coexisting __mmc_start_request(), mmc_start_request() and __mmc_start_req() it is a bit confusing that mmc_start_req() actually does not start a normal request, but an asynchronous request. Rename it to mmc_start_areq() to make it explicit what the function is doing, also fix the kerneldoc for this function while we're at it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Don't use extern declarations of public mmc functionsUlf Hansson2017-02-131-8/+9
| | | | | | | | | Using extern when declaring functions in the public header, core.h, is redundant. Let's just remove the use of it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
* mmc: core: Move erase/trim/discard defines from public core.h to mmc.hUlf Hansson2017-02-131-10/+0
| | | | | | | | | | As the public mmc.h header already contains similar defines for other mmc commands and arguments, let's move those for erase/trim/discard into here as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
* mmc: core: Move some host specific public functions to host.hUlf Hansson2017-02-131-6/+0
| | | | | | | | | | | Ideally the public mmc header file, core.h, shouldn't contain interfaces particularly intended to be used by host drivers. Instead those should remain in the host.h header file. Therefore, let's move a couple functions from core.h to host.h. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
* mmc: core: Move public functions from core.h to private headersUlf Hansson2017-02-131-50/+0
| | | | | | | | | | | | | | | A significant amount of functions are available through the public mmc core.h header file. Let's slim down this public mmc interface, as to prevent users from abusing it, by moving some of the functions to private mmc header files. This change concentrates on moving the functions into private mmc headers, following changes may continue with additional clean-ups, as an example some functions can be turned into static. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
* mmc: core: First step in cleaning up public mmc header filesUlf Hansson2017-02-131-2/+1
| | | | | | | | | | | | | | This is the first step in cleaning up the public mmc header files. In this change we makes sure each header file builds standalone, as that helps to resolve dependencies. While changing this, it also seems reasonable to stop including other headers from inside a header itself which it don't depend upon. Additionally, in some cases such dependencies are better resolved by forward declaring the needed struct. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
* mmc: mmc: Introduce mmc_abort_tuning()Adrian Hunter2016-12-051-0/+1
| | | | | | | | | If a tuning command times out, the card could still be processing it, which will cause problems for recovery. The eMMC specification says that CMD12 can be used to stop CMD21, so add a function that does that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: use enum mmc_blk_status properlyLinus Walleij2016-11-291-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were several instances of code using the enum mmc_blk_status by arbitrarily converting it to an int and throwing it around to different functions. This makes the code hard to understand to may give rise to strange errors. Especially the function prototype mmc_start_req() had to be modified to take a pointer to an enum mmc_blk_status and the function pointer .err_check() inside struct mmc_async_req needed to return an enum mmc_blk_status. In every case: instead of assigning the block layer error code to an int, use the enum, also change the signature of all functions actually passing this enum to use the enum. To make it possible to use the enum everywhere applicable, move it to <linux/mmc/core.h> so that all code actually using it can also see it. An interesting case was encountered in the MMC test code which did not return a enum mmc_blk_status at all in the .err_check function supposed to check whether asynchronous requests worked or not: instead it returned a normal -ERROR or even the test frameworks internal error codes. The test code would also pass on enum mmc_blk_status codes as error codes inside the test code instead of converting them to the local RESULT_* codes. I have tried to fix all instances properly and run some tests on the result. Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: add define for R1 response without CRCWolfram Sang2016-09-261-0/+3
| | | | | | | | The core uses it for polling. Give drivers a proper define handle this case like for other response types. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Add support for sending commands during data transferAdrian Hunter2016-09-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A host controller driver exposes its capability using caps flag MMC_CAP_CMD_DURING_TFR. A driver with that capability can accept requests that are marked mrq->cap_cmd_during_tfr = true. Then the driver informs the upper layers when the command line is available for further commands by calling mmc_command_done(). Because of that, the driver will not then automatically send STOP commands, and it is the responsibility of the upper layer to send a STOP command if it is required. For requests submitted through the mmc_wait_for_req() interface, the caller sets mrq->cap_cmd_during_tfr = true which causes mmc_wait_for_req() in fact not to wait. The caller can then send commands that do not use the data lines. Finally the caller can wait for the transfer to complete by calling mmc_wait_for_req_done() which is now exported. For requests submitted through the mmc_start_req() interface, the caller again sets mrq->cap_cmd_during_tfr = true, but mmc_start_req() anyway does not wait. The caller can then send commands that do not use the data lines. Finally the caller can wait for the transfer to complete in the normal way i.e. calling mmc_start_req() again. Irrespective of how a cap_cmd_during_tfr request is started, mmc_is_req_done() can be called if the upper layer needs to determine if the request is done. However the appropriate waiting function (either mmc_wait_for_req_done() or mmc_start_req()) must still be called. The implementation consists primarily of a new completion mrq->cmd_completion which notifies when the command line is available for further commands. That completion is completed by mmc_command_done(). When there is an ongoing data transfer, calls to mmc_wait_for_req() will automatically wait on that completion, so the caller does not have to do anything special. Note, in the case of errors, the driver may call mmc_request_done() without calling mmc_command_done() because mmc_request_done() always calls mmc_command_done(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: remove the MMC_DATA_STREAM flagJaehoon Chung2016-02-291-1/+0
| | | | | | | | | It's not set to MMC_DATA_STREAM anywhere. It seems that it had been used with CMD11/CMD20. But according to Spec, CMD11/CMD20 are obsolete command. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: mmc: extend the mmc_send_tuning()Chaotian Jing2015-10-271-1/+1
| | | | | | | | | | | | | | | | The mmc_execute_tuning() has already prepared the opcode, there is no need to prepare it again at mmc_send_tuning(), and, there is a BUG of mmc_send_tuning() to determine the opcode by bus width, assume eMMC was running at HS200, 4bit mode, then the mmc_send_tuning() will overwrite the opcode from CMD21 to CMD19, then got error. in addition, extend an argument of "cmd_error" to allow getting if there was cmd error when tune response. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> [Ulf: Rebased patch] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Convert __mmc_switch() into an internal core functionUlf Hansson2015-10-261-2/+0
| | | | | | | As there are no users of the __mmc_switch() API, except for the mmc core itself, let's convert it from an exported function into an internal. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: mediatek: Add Mediatek MMC driverChaotian Jing2015-06-181-0/+1
| | | | | | | | Add Mediatek MMC driver code Support eMMC/SD/SDIO Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Convert the error field in struct mmc_command|data into an intUlf Hansson2015-04-081-2/+2
| | | | | | | | Everybody expects the error field in the struct mmc_command|data to be and int but it's actually an unsigned int. Let's convert it into an int to meet the expectations. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: always check status after resetJohan Rudholm2015-01-191-1/+0
| | | | | | | | | Always check if the card is alive after a successful reset. This allows us to remove mmc_hw_reset_check(), leaving mmc_hw_reset() as the only card reset interface. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameterUlf Hansson2014-12-081-1/+1
| | | | | | | | | | | To be able to use mmc_send_tuning() prior the struct mmc_card has been allocated, let's convert it to take the struct mmc_host* as parameter instead. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Dong Aisheng <b29396@freescale.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
* mmc: core: add core-level function for sending tuning commandsMinda Chen2014-11-261-0/+1
| | | | | | | | | | | | | | According to the SD card spec, Add a manual tuning command function for SDR104/HS200. Sending command 19 or command 21 to read data and compare with the tunning block pattern. This patch will help to decrease some platform private codes in SDHCI platform_execute_tuning() callbacks. Signed-off-by: Minda Chen <Minda.Chen@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Remove the redundant mmc_send_ext_csd() APIUlf Hansson2014-11-101-1/+0
| | | | | | | | Previous patches has replaced the calls to mmc_send_ext_csd() into mmc_get_ext_csd(), thus mmc_send_ext_csd() has become redundant. Let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Export mmc_get_ext_csd()Ulf Hansson2014-11-101-0/+1
| | | | | | | Callers of mmc_send_ext_csd() will be able to decrease code duplication by using mmc_get_ext_csd() instead. Let's make it available. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Add ignore_crc flag to __mmc_switchUlf Hansson2014-02-231-1/+1
| | | | | | | | | Instead of handle specific adaptations, releated to certain switch operations, inside __mmc_switch, push this to be handled by the caller instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: core: Rename cmd_timeout_ms to busy_timeoutUlf Hansson2014-02-231-1/+1
| | | | | | | | To better reflect that the cmd_timeout_ms is directly related to the busy detection timeout, let's rename it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: core: Do not poll for busy with status cmd for all switch cmdsUlf Hansson2013-10-301-1/+2
| | | | | | | | | | | | Some switch operations like poweroff notify, shall according to the spec not be followed by any other new commands. For these cases and when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not send status commands to poll for busy detection. Instead wait for the stated timeout from the EXT_CSD before completing the request. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: remove dead function mmc_try_claim_hostGrant Grundler2013-09-251-1/+0
| | | | | | | | | cscope says there are no callers for mmc_try_claim_host in the kernel. No reason to keep it. Signed-off-by: Grant Grundler <grundler@chromium.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: parse voltage from device-treeHaijun Zhang2013-08-261-0/+2
| | | | | | | | | | Add function to support getting voltage from device-tree. If voltage-range is specified in device-tree node, this function will parse it and return the available voltage mask. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: block: Enable runtime pm for mmc blkdeviceUlf Hansson2013-05-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Once the mmc blkdevice is being probed, runtime pm will be enabled. By using runtime autosuspend, the power save operations can be done when request inactivity occurs for a certain time. Right now the selected timeout value is set to 3 s. Obviously this value will likely need to be configurable somehow since it needs to be trimmed depending on the power save algorithm. For SD-combo cards, we are still leaving the enablement of runtime PM to the SDIO init sequence since it depends on the capabilities of the SDIO func driver. Moreover, when the blk device is being suspended, we make sure the device will be runtime resumed. The reason for doing this is that we want the host suspend sequence to be unaware of any runtime power save operations done for the card in this phase. Thus it can just handle the suspend as the card is fully powered from a runtime perspective. Finally, this patch prepares to make it possible to move BKOPS handling into the runtime callbacks for the mmc bus_ops. Thus IDLE BKOPS can be accomplished. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: card: Adding support for sanitize in eMMC 4.5Maya Erez2013-05-261-0/+2
| | | | | | | | | | | | | | | | | | | The sanitize support is added as a user-app ioctl call, and was removed from the block-device request, since its purpose is to be invoked not via File-System but by a user. This feature deletes the unmap memory region of the eMMC card, by writing to a specific register in the EXT_CSD. unmap region is the memory region that was previously deleted (by erase, trim or discard operation). In order to avoid timeout when sanitizing large-scale cards, the timeout for sanitize operation is 240 seconds. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: support packed write command for eMMC4.5 devicesSeungwon Jeon2013-02-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supports packed write command of eMMC4.5 devices. Several writes can be grouped in packed command and all data of the individual commands can be sent in a single transfer on the bus. Large amounts of data in one transfer rather than several data of small size are effective for eMMC write internally. As a result, packed command help write throughput be improved. The following tables show the results of packed write. Type A: test none | packed iozone 25.8 | 31 tiotest 27.6 | 31.2 lmdd 31.2 | 35.4 Type B: test none | packed iozone 44.1 | 51.1 tiotest 47.9 | 52.5 lmdd 51.6 | 59.2 Type C: test none | packed iozone 19.5 | 32 tiotest 19.9 | 34.5 lmdd 22.8 | 40.7 Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: fix async request mechanism for sequential read scenariosKonstantin Dorfman2013-02-111-1/+2
| | | | | | | | | | | | | | | | | | | | | When current request is running on the bus and if next request fetched by mmcqd is NULL, mmc context (mmcqd thread) gets blocked until the current request completes. This means that if new request comes in while the mmcqd thread is blocked, this new request can not be prepared in parallel to current ongoing request. This may result in delaying the new request execution and increase it's latency. This change allows to wake up the MMC thread on new request arrival. Now once the MMC thread is woken up, a new request can be fetched and prepared in parallel to the current running request which means this new request can be started immediately after the current running request completes. With this change read throughput is improved by 16%. Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: Add mmc_set_blockcount featureLoic Pallardy2012-12-061-0/+2
| | | | | | | | | | | | | Provide support for automatically sending Set Block Count (CMD23) messages. Used at least for RPMB support. Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Krishna Konda <kkonda@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: support BKOPS feature for eMMCJaehoon Chung2012-10-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Enable eMMC background operations (BKOPS) feature. If URGENT_BKOPS is set after a response, note that BKOPS are required. Immediately run BKOPS if required. Read/write operations should be requested during BKOPS(LEVEL-1), then issue HPI to interrupt the ongoing BKOPS and service the foreground operation. (This patch only controls the LEVEL2/3.) When repeating the writing 1GB data, at a certain time, performance is decreased. At that time, card triggers the Level-3 or Level-2. After running bkops, performance is recovered. Future considerations: * Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner. * Interrupt ongoing BKOPS before powering off the card. * How do we get BKOPS_STATUS value (periodically send ext_csd command)? * If using periodic bkops, also consider runtime_pm control. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* Merge tag 'mmc-merge-for-3.4-rc1' of ↵Linus Torvalds2012-03-281-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: Core: * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices that support Data Tag will provide increased throughput for metadata. * Faster detection of card removal on I/O errors. Drivers: * dw_mmc now supports eMMC Power Off Notify, has PCI support, and implements pre_req and post_req for asynchronous requests. * omap_hsmmc now supports device tree. * esdhc now has power management support. * sdhci-tegra now supports Tegra30 devices. * sdhci-spear now supports hibernation. * tmio_mmc now supports using a GPIO for card detection. * Intel PCH now supports 8-bit bus transfers. * tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: sh_mmcif: simplify bitmask macros mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug mmc: sh_mobile_sdhi: add a callback for board specific init code mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function mmc: sh_mobile_sdhi: do not manage PM clocks manually mmc: tmio_mmc: remove unused sdio_irq_enabled flag mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper mmc: tmio: calculate the native hotplug condition only once mmc: simplify mmc_cd_gpio_request() by removing two parameters mmc: sdhci-pci: allow 8-bit bus width for Intel PCH mmc: sdhci: check interrupt flags in ISR again mmc: sdhci-pci: Add MSI support mmc: core: warn when card doesn't support HPI mmc: davinci: Poll status for small size transfers mmc: davinci: Eliminate spurious interrupts mmc: omap_hsmmc: Avoid a regulator voltage change with dt mmc: omap_hsmmc: Convert hsmmc driver to use device tree mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO ...
| * mmc: start removing enable / disable APIAdrian Hunter2012-03-271-1/+0
| | | | | | | | | | | | | | | | | | | | Most parts of the enable / disable API are no longer used and can be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Venkatraman S <svenkatr@ti.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | device.h: audit and cleanup users in main include dirPaul Gortmaker2012-03-161-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* mmc: allow upper layers to know immediately if card has been removedAdrian Hunter2012-01-111-0/+2
| | | | | | | | | | | | Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: support HPI send commandJaehoon Chung2011-10-261-0/+1
| | | | | | | | HPI command is defined in eMMC4.41. This feature is important for eMMC4.5 devices. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: Add cache control for eMMC4.5 deviceSeungwon Jeon2011-10-261-0/+2
| | | | | | | | | | This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: new discard feature support at eMMC v4.5Kyungmin Park2011-10-261-0/+2
| | | | | | | | | MMC v4.5 supports the DISCARD feature (CMD38). It's different from trim and there's no check bit. Currently it's only supported at v4.5. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: mmc sanitize feature support for v4.5Kyungmin Park2011-10-261-0/+1
| | | | | | | | | In the v4.5, there's no secure erase & trim support. Instead it supports the sanitize feature. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: add eMMC hardware reset supportAdrian Hunter2011-10-261-0/+3
| | | | | | | | | | | | | eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: add non-blocking mmc request functionPer Forlin2011-07-201-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously there has only been one function mmc_wait_for_req() to start and wait for a request. This patch adds: * mmc_start_req() - starts a request wihtout waiting If there is on ongoing request wait for completion of that request and start the new one and return. Does not wait for the new command to complete. This patch also adds new function members in struct mmc_host_ops only called from core.c: * pre_req - asks the host driver to prepare for the next job * post_req - asks the host driver to clean up after a completed job The intention is to use pre_req() and post_req() to do cache maintenance while a request is active. pre_req() can be called while a request is active to minimize latency to start next job. post_req() can be used after the next job is started to clean up the request. This will minimize the host driver request end latency. post_req() is typically used before ending the block request and handing over the buffer to the block layer. Add a host-private member in mmc_data to be used by pre_req to mark the data. The host driver will then check this mark to see if the data is prepared or not. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: queue: let host controllers specify maximum discard timeoutAdrian Hunter2011-07-201-0/+1
| | | | | | | | | | | | | | | | | | Some host controllers will not operate without a hardware timeout that is limited in value. However large discards require large timeouts, so there needs to be a way to specify the maximum discard size. A host controller driver may now specify the maximum discard timeout possible so that max_discard_sectors can be calculated. However, for eMMC when the High Capacity Erase Group Size is not in use, the timeout calculation depends on clock rate which may change. For that case Preferred Erase Size is used instead. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: Standardize header file inclusion checks.Robert P. J. Day2011-07-201-1/+1
| | | | | | | | | Standardize the checks for multiple MMC header file inclusion, including adding comments to terminating #endif's, and fixing one incorrect comment. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: Use CMD23 for multiblock transfers when we can.Andrei Warkentin2011-05-251-0/+1
| | | | | | | | CMD23-prefixed instead of open-ended multiblock transfers have a performance advantage on some MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: Add mmc CMD+ACMD passthrough ioctlJohn Calixto2011-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Allows appropriately-privileged applications to send CMD (normal) and ACMD (application-specific; preceded with CMD55) commands to cards/devices on the mmc bus. This is primarily useful for enabling the security functionality built in to every SD card. It can also be used as a generic passthrough (e.g. to enable virtual machines to control mmc bus devices directly). However, this use case has not been tested rigorously. Generic passthrough testing was only conducted for a few non-security opcodes to prove the feasibility of the passthrough. Since any opcode can be sent using this passthrough, it is very possible to render the card/device unusable. Applications that use this ioctl must have CAP_SYS_RAWIO. Security commands tested on TI PCIxx12 (SDHCI), Sigma Designs SMP8652 SoC, TI OMAP3621/OMAP3630 SoC, Samsung S5PC110 SoC, Qualcomm MSM7200A SoC. Signed-off-by: John Calixto <john.calixto@modsystems.com> Reviewed-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: Allow setting CMD timeout for CMD6 (SWITCH).Andrei Warkentin2011-05-241-0/+1
| | | | | | | | | CMD6 is an R1B-type command, where DAT is used as busy. Depending on register written using CMD6, timeout value can be different as per spec. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: Rename erase_timeout to cmd_timeout_ms.Andrei Warkentin2011-05-241-1/+1
| | | | | | | | | Renames erase_timeout to cmd_timeout_ms inside struct mmc_command. First step to making host honor timeouts for non-data-transfer commands. Cleans up erase timeout code. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: export function mmc_do_release_host()Ulf Hansson2011-03-171-0/+1
| | | | | | | | | | | | When using mmc_try_claim_host the corresponding release function is mmc_do_release_host, which then also must be exported. Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: Fixes for Dual Data Rate (DDR) supportAdrian Hunter2010-10-231-1/+2
| | | | | | | | | | | | | | | | | | The DDR support patch needs the following fixes: - The block driver does not need to know about DDR, any more than it needs to know about bus width. - Not only the card must be switched to DDR mode. The host controller must also be configured, which is done through the 'set_ios()' function. - Do not set the DDR mode state until after the switch command is successful. - Setting block length is not supported in DDR mode. Make that a core function and change the other place it is used (mmc_test) also. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: MMC 4.4 DDR supportHanumath Prasad2010-10-231-0/+1
| | | | | | | | | | | Add support for Dual Data Rate MMC cards as defined in the 4.4 specification. Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Cc: linux-mmc@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>