summaryrefslogtreecommitdiffstats
path: root/kernel/bpf/core.c
Commit message (Collapse)AuthorAgeFilesLines
* bpf: Undo off-by-one in interpreter tail call count limitDaniel Borkmann2021-08-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BPF interpreter as well as x86-64 BPF JIT were both in line by allowing up to 33 tail calls (however odd that number may be!). Recently, this was changed for the interpreter to reduce it down to 32 with the assumption that this should have been the actual limit "which is in line with the behavior of the x86 JITs" according to b61a28cf11d61 ("bpf: Fix off-by-one in tail call count limiting"). Paul recently reported: I'm a bit surprised by this because I had previously tested the tail call limit of several JIT compilers and found it to be 33 (i.e., allowing chains of up to 34 programs). I've just extended a test program I had to validate this again on the x86-64 JIT, and found a limit of 33 tail calls again [1]. Also note we had previously changed the RISC-V and MIPS JITs to allow up to 33 tail calls [2, 3], for consistency with other JITs and with the interpreter. We had decided to increase these two to 33 rather than decrease the other JITs to 32 for backward compatibility, though that probably doesn't matter much as I'd expect few people to actually use 33 tail calls. [1] https://github.com/pchaigno/tail-call-bench/commit/ae7887482985b4b1745c9b2ef7ff9ae506c82886 [2] 96bc4432f5ad ("bpf, riscv: Limit to 33 tail calls") [3] e49e6f6db04e ("bpf, mips: Limit to 33 tail calls") Therefore, revert b61a28cf11d61 to re-align interpreter to limit a maximum of 33 tail calls. While it is unlikely to hit the limit for the vast majority, programs in the wild could one way or another depend on this, so lets rather be a bit more conservative, and lets align the small remainder of JITs to 33. If needed in future, this limit could be slightly increased, but not decreased. Fixes: b61a28cf11d61 ("bpf: Fix off-by-one in tail call count limiting") Reported-by: Paul Chaignon <paul@cilium.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/CAO5pjwTWrC0_dzTbTHFPSqDwA56aVH+4KFGVqdq8=ASs0MqZGQ@mail.gmail.com
* bpf: Allow to specify user-provided bpf_cookie for BPF perf linksAndrii Nakryiko2021-08-171-11/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ability for users to specify custom u64 value (bpf_cookie) when creating BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event, tracepoints). This is useful for cases when the same BPF program is used for attaching and processing invocation of different tracepoints/kprobes/uprobes in a generic fashion, but such that each invocation is distinguished from each other (e.g., BPF program can look up additional information associated with a specific kernel function without having to rely on function IP lookups). This enables new use cases to be implemented simply and efficiently that previously were possible only through code generation (and thus multiple instances of almost identical BPF program) or compilation at runtime (BCC-style) on target hosts (even more expensive resource-wise). For uprobes it is not even possible in some cases to know function IP before hand (e.g., when attaching to shared library without PID filtering, in which case base load address is not known for a library). This is done by storing u64 bpf_cookie in struct bpf_prog_array_item, corresponding to each attached and run BPF program. Given cgroup BPF programs already use two 8-byte pointers for their needs and cgroup BPF programs don't have (yet?) support for bpf_cookie, reuse that space through union of cgroup_storage and new bpf_cookie field. Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx. This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF program execution code, which luckily is now also split from BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper giving access to this user-provided cookie value from inside a BPF program. Generic perf_event BPF programs will access this value from perf_event itself through passed in BPF program context. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
* bpf: Refactor BPF_PROG_RUN into a functionAndrii Nakryiko2021-08-171-1/+1
| | | | | | | | | | | | | | | | | | | | | Turn BPF_PROG_RUN into a proper always inlined function. No functional and performance changes are intended, but it makes it much easier to understand what's going on with how BPF programs are actually get executed. It's more obvious what types and callbacks are expected. Also extra () around input parameters can be dropped, as well as `__` variable prefixes intended to avoid naming collisions, which makes the code simpler to read and write. This refactoring also highlighted one extra issue. BPF_PROG_RUN is both a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning BPF_PROG_RUN into a function causes naming conflict compilation error. So rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-08-131-1/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * bpf, core: Fix kernel-doc notationRandy Dunlap2021-08-101-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix kernel-doc warnings in kernel/bpf/core.c (found by scripts/kernel-doc and W=1 builds). That is, correct a function name in a comment and add return descriptions for 2 functions. Fixes these kernel-doc warnings: kernel/bpf/core.c:1372: warning: expecting prototype for __bpf_prog_run(). Prototype was for ___bpf_prog_run() instead kernel/bpf/core.c:1372: warning: No description found for return value of '___bpf_prog_run' kernel/bpf/core.c:1883: warning: No description found for return value of 'bpf_prog_select_runtime' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210809215229.7556-1-rdunlap@infradead.org
* | bpf: Fix off-by-one in tail call count limitingJohan Almbladh2021-08-021-1/+1
|/ | | | | | | | | | | Before, the interpreter allowed up to MAX_TAIL_CALL_CNT + 1 tail calls. Now precisely MAX_TAIL_CALL_CNT is allowed, which is in line with the behavior of the x86 JITs. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210728164741.350370-1-johan.almbladh@anyfinetworks.com
* bpf: Introduce BPF nospec instruction for mitigating Spectre v4Daniel Borkmann2021-07-291-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | In case of JITs, each of the JIT backends compiles the BPF nospec instruction /either/ to a machine instruction which emits a speculation barrier /or/ to /no/ machine instruction in case the underlying architecture is not affected by Speculative Store Bypass or has different mitigations in place already. This covers both x86 and (implicitly) arm64: In case of x86, we use 'lfence' instruction for mitigation. In case of arm64, we rely on the firmware mitigation as controlled via the ssbd kernel parameter. Whenever the mitigation is enabled, it works for all of the kernel code with no need to provide any additional instructions here (hence only comment in arm64 JIT). Other archs can follow as needed. The BPF nospec instruction is specifically targeting Spectre v4 since i) we don't use a serialization barrier for the Spectre v1 case, and ii) mitigation instructions for v1 and v4 might be different on some archs. The BPF nospec is required for a future commit, where the BPF verifier does annotate intermediate BPF programs with speculation barriers. Co-developed-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de> Acked-by: Alexei Starovoitov <ast@kernel.org>
* bpf: Track subprog poke descriptors correctly and fix use-after-freeJohn Fastabend2021-07-091-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- */ u32 size_poke_tab; /* 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, a748c6975dea3 ("bpf: propagate poke descriptors to subprograms") had an off-by-one on the subprogram instruction index range check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'. However, subprog_end is the next subprogram's start instruction. Fixes: a748c6975dea3 ("bpf: propagate poke descriptors to subprograms") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210707223848.14580-2-john.fastabend@gmail.com
* bpf: Fix up register-based shifts in interpreter to silence KUBSANDaniel Borkmann2021-06-171-18/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot reported a shift-out-of-bounds that KUBSAN observed in the interpreter: [...] UBSAN: shift-out-of-bounds in kernel/bpf/core.c:1420:2 shift exponent 255 is too large for 64-bit type 'long long unsigned int' CPU: 1 PID: 11097 Comm: syz-executor.4 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 ___bpf_prog_run.cold+0x19/0x56c kernel/bpf/core.c:1420 __bpf_prog_run32+0x8f/0xd0 kernel/bpf/core.c:1735 bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline] bpf_prog_run_clear_cb include/linux/filter.h:755 [inline] run_filter+0x1a1/0x470 net/packet/af_packet.c:2031 packet_rcv+0x313/0x13e0 net/packet/af_packet.c:2104 dev_queue_xmit_nit+0x7c2/0xa90 net/core/dev.c:2387 xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0xad/0x920 net/core/dev.c:3609 __dev_queue_xmit+0x2121/0x2e00 net/core/dev.c:4182 __bpf_tx_skb net/core/filter.c:2116 [inline] __bpf_redirect_no_mac net/core/filter.c:2141 [inline] __bpf_redirect+0x548/0xc80 net/core/filter.c:2164 ____bpf_clone_redirect net/core/filter.c:2448 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2420 ___bpf_prog_run+0x34e1/0x77d0 kernel/bpf/core.c:1523 __bpf_prog_run512+0x99/0xe0 kernel/bpf/core.c:1737 bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline] bpf_test_run+0x3ed/0xc50 net/bpf/test_run.c:50 bpf_prog_test_run_skb+0xabc/0x1c50 net/bpf/test_run.c:582 bpf_prog_test_run kernel/bpf/syscall.c:3127 [inline] __do_sys_bpf+0x1ea9/0x4f00 kernel/bpf/syscall.c:4406 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Generally speaking, KUBSAN reports from the kernel should be fixed. However, in case of BPF, this particular report caused concerns since the large shift is not wrong from BPF point of view, just undefined. In the verifier, K-based shifts that are >= {64,32} (depending on the bitwidth of the instruction) are already rejected. The register-based cases were not given their content might not be known at verification time. Ideas such as verifier instruction rewrite with an additional AND instruction for the source register were brought up, but regularly rejected due to the additional runtime overhead they incur. As Edward Cree rightly put it: Shifts by more than insn bitness are legal in the BPF ISA; they are implementation-defined behaviour [of the underlying architecture], rather than UB, and have been made legal for performance reasons. Each of the JIT backends compiles the BPF shift operations to machine instructions which produce implementation-defined results in such a case; the resulting contents of the register may be arbitrary but program behaviour as a whole remains defined. Guard checks in the fast path (i.e. affecting JITted code) will thus not be accepted. The case of division by zero is not truly analogous here, as division instructions on many of the JIT-targeted architectures will raise a machine exception / fault on division by zero, whereas (to the best of my knowledge) none will do so on an out-of-bounds shift. Given the KUBSAN report only affects the BPF interpreter, but not JITs, one solution is to add the ANDs with 63 or 31 into ___bpf_prog_run(). That would make the shifts defined, and thus shuts up KUBSAN, and the compiler would optimize out the AND on any CPU that interprets the shift amounts modulo the width anyway (e.g., confirmed from disassembly that on x86-64 and arm64 the generated interpreter code is the same before and after this fix). The BPF interpreter is slow path, and most likely compiled out anyway as distros select BPF_JIT_ALWAYS_ON to avoid speculative execution of BPF instructions by the interpreter. Given the main argument was to avoid sacrificing performance, the fact that the AND is optimized away from compiler for mainstream archs helps as well as a solution moving forward. Also add a comment on LSH/RSH/ARSH translation for JIT authors to provide guidance when they see the ___bpf_prog_run() interpreter code and use it as a model for a new JIT backend. Reported-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com Reported-by: Kurt Manucredo <fuzzybritches0@gmail.com> Signed-off-by: Eric Biggers <ebiggers@kernel.org> Co-developed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com Cc: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/bpf/0000000000008f912605bd30d5d7@google.com Link: https://lore.kernel.org/bpf/bac16d8d-c174-bdc4-91bd-bfa62b410190@gmail.com
* bpf: Remove unused parameter from ___bpf_prog_runHe Fengqing2021-04-031-4/+3
| | | | | | | | | | | 'stack' parameter is not used in ___bpf_prog_run() after f696b8f471ec ("bpf: split bpf core interpreter"), the base address have been set to FP reg. So consequently remove it. Signed-off-by: He Fengqing <hefengqing@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210331075135.3850782-1-hefengqing@huawei.com
* bpf: Support bpf program calling kernel functionMartin KaFai Lau2021-03-261-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to BPF verifier to allow bpf program calling kernel function directly. The use case included in this set is to allow bpf-tcp-cc to directly call some tcp-cc helper functions (e.g. "tcp_cong_avoid_ai()"). Those functions have already been used by some kernel tcp-cc implementations. This set will also allow the bpf-tcp-cc program to directly call the kernel tcp-cc implementation, For example, a bpf_dctcp may only want to implement its own dctcp_cwnd_event() and reuse other dctcp_*() directly from the kernel tcp_dctcp.c instead of reimplementing (or copy-and-pasting) them. The tcp-cc kernel functions mentioned above will be white listed for the struct_ops bpf-tcp-cc programs to use in a later patch. The white listed functions are not bounded to a fixed ABI contract. Those functions have already been used by the existing kernel tcp-cc. If any of them has changed, both in-tree and out-of-tree kernel tcp-cc implementations have to be changed. The same goes for the struct_ops bpf-tcp-cc programs which have to be adjusted accordingly. This patch is to make the required changes in the bpf verifier. First change is in btf.c, it adds a case in "btf_check_func_arg_match()". When the passed in "btf->kernel_btf == true", it means matching the verifier regs' states with a kernel function. This will handle the PTR_TO_BTF_ID reg. It also maps PTR_TO_SOCK_COMMON, PTR_TO_SOCKET, and PTR_TO_TCP_SOCK to its kernel's btf_id. In the later libbpf patch, the insn calling a kernel function will look like: insn->code == (BPF_JMP | BPF_CALL) insn->src_reg == BPF_PSEUDO_KFUNC_CALL /* <- new in this patch */ insn->imm == func_btf_id /* btf_id of the running kernel */ [ For the future calling function-in-kernel-module support, an array of module btf_fds can be passed at the load time and insn->off can be used to index into this array. ] At the early stage of verifier, the verifier will collect all kernel function calls into "struct bpf_kfunc_desc". Those descriptors are stored in "prog->aux->kfunc_tab" and will be available to the JIT. Since this "add" operation is similar to the current "add_subprog()" and looking for the same insn->code, they are done together in the new "add_subprog_and_kfunc()". In the "do_check()" stage, the new "check_kfunc_call()" is added to verify the kernel function call instruction: 1. Ensure the kernel function can be used by a particular BPF_PROG_TYPE. A new bpf_verifier_ops "check_kfunc_call" is added to do that. The bpf-tcp-cc struct_ops program will implement this function in a later patch. 2. Call "btf_check_kfunc_args_match()" to ensure the regs can be used as the args of a kernel function. 3. Mark the regs' type, subreg_def, and zext_dst. At the later do_misc_fixups() stage, the new fixup_kfunc_call() will replace the insn->imm with the function address (relative to __bpf_call_base). If needed, the jit can find the btf_func_model by calling the new bpf_jit_find_kfunc_model(prog, insn). With the imm set to the function address, "bpftool prog dump xlated" will be able to display the kernel function calls the same way as it displays other bpf helper calls. gpl_compatible program is required to call kernel function. This feature currently requires JIT. The verifier selftests are adjusted because of the changes in the verbose log in add_subprog_and_kfunc(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015142.1544736-1-kafai@fb.com
* bpf: Simplify freeing logic in linfo and jited_linfoMartin KaFai Lau2021-03-261-23/+12
| | | | | | | | | | | | | | | | | | | | This patch simplifies the linfo freeing logic by combining "bpf_prog_free_jited_linfo()" and "bpf_prog_free_unused_jited_linfo()" into the new "bpf_prog_jit_attempt_done()". It is a prep work for the kernel function call support. In a later patch, freeing the kernel function call descriptors will also be done in the "bpf_prog_jit_attempt_done()". "bpf_prog_free_linfo()" is removed since it is only called by "__bpf_prog_put_noref()". The kvfree() are directly called instead. It also takes this chance to s/kcalloc/kvcalloc/ for the jited_linfo allocation. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015130.1544323-1-kafai@fb.com
* bpf: Fix fexit trampoline.Alexei Starovoitov2021-03-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The fexit/fmod_ret programs can be attached to kernel functions that can sleep. The synchronize_rcu_tasks() will not wait for such tasks to complete. In such case the trampoline image will be freed and when the task wakes up the return IP will point to freed memory causing the crash. Solve this by adding percpu_ref_get/put for the duration of trampoline and separate trampoline vs its image life times. The "half page" optimization has to be removed, since first_half->second_half->first_half transition cannot be guaranteed to complete in deterministic time. Every trampoline update becomes a new image. The image with fmod_ret or fexit progs will be freed via percpu_ref_kill and call_rcu_tasks. Together they will wait for the original function and trampoline asm to complete. The trampoline is patched from nop to jmp to skip fexit progs. They are freed independently from the trampoline. The image with fentry progs only will be freed via call_rcu_tasks_trace+call_rcu_tasks which will wait for both sleepable and non-sleepable progs to complete. Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU Link: https://lore.kernel.org/bpf/20210316210007.38949-1-alexei.starovoitov@gmail.com
* bpf: Explicitly zero-extend R0 after 32-bit cmpxchgBrendan Jackman2021-03-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed out by Ilya and explained in the new comment, there's a discrepancy between x86 and BPF CMPXCHG semantics: BPF always loads the value from memory into r0, while x86 only does so when r0 and the value in memory are different. The same issue affects s390. At first this might sound like pure semantics, but it makes a real difference when the comparison is 32-bit, since the load will zero-extend r0/rax. The fix is to explicitly zero-extend rax after doing such a CMPXCHG. Since this problem affects multiple archs, this is done in the verifier by patching in a BPF_ZEXT_REG instruction after every 32-bit cmpxchg. Any archs that don't need such manual zero-extension can do a look-ahead with insn_is_zext to skip the unnecessary mov. Note this still goes on top of Ilya's patch: https://lore.kernel.org/bpf/20210301154019.129110-1-iii@linux.ibm.com/T/#u Differences v5->v6[1]: - Moved is_cmpxchg_insn and ensured it can be safely re-used. Also renamed it and removed 'inline' to match the style of the is_*_function helpers. - Fixed up comments in verifier test (thanks for the careful review, Martin!) Differences v4->v5[1]: - Moved the logic entirely into opt_subreg_zext_lo32_rnd_hi32, thanks to Martin for suggesting this. Differences v3->v4[1]: - Moved the optimization against pointless zext into the correct place: opt_subreg_zext_lo32_rnd_hi32 is called _after_ fixup_bpf_calls. Differences v2->v3[1]: - Moved patching into fixup_bpf_calls (patch incoming to rename this function) - Added extra commentary on bpf_jit_needs_zext - Added check to avoid adding a pointless zext(r0) if there's already one there. Difference v1->v2[1]: Now solved centrally in the verifier instead of specifically for the x86 JIT. Thanks to Ilya and Daniel for the suggestions! [1] v5: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t v4: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t v3: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t v2: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t v1: https://lore.kernel.org/bpf/d7ebaefb-bfd6-a441-3ff2-2fdfe699b1d2@iogearbox.net/T/#t Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> Fixes: 5ffa25502b5a ("bpf: Add instructions for atomic_[cmp]xchg") Signed-off-by: Brendan Jackman <jackmanb@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* bpf: Clear percpu pointers in bpf_prog_clone_free()Cong Wang2021-02-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to bpf_prog_realloc(), bpf_prog_clone_create() also copies the percpu pointers, but the clone still shares them with the original prog, so we have to clear these two percpu pointers in bpf_prog_clone_free(). Otherwise we would get a double free: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 13 PID: 8140 Comm: kworker/13:247 Kdump: loaded Tainted: G                W    OE   5.11.0-rc4.bm.1-amd64+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 test_bpf: #1 TXA Workqueue: events bpf_prog_free_deferred RIP: 0010:percpu_ref_get_many.constprop.97+0x42/0xf0 Code: [...] RSP: 0018:ffffa6bce1f9bda0 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000021dfc7b RDX: ffffffffae2eeb90 RSI: 867f92637e338da5 RDI: 0000000000000046 RBP: ffffa6bce1f9bda8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000046 R11: 0000000000000000 R12: 0000000000000280 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9b5f3ffdedc0 FS:    0000000000000000(0000) GS:ffff9b5f2fb40000(0000) knlGS:0000000000000000 CS:    0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000027c36c002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace:     refill_obj_stock+0x5e/0xd0     free_percpu+0xee/0x550     __bpf_prog_free+0x4d/0x60     process_one_work+0x26a/0x590     worker_thread+0x3c/0x390     ? process_one_work+0x590/0x590     kthread+0x130/0x150     ? kthread_park+0x80/0x80     ret_from_fork+0x1f/0x30 This bug is 100% reproducible with test_kmod.sh. Fixes: 700d4796ef59 ("bpf: Optimize program stats") Fixes: ca06f55b9002 ("bpf: Add per-program recursion prevention mechanism") Reported-by: Jiang Wang <jiang.wang@bytedance.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210218001647.71631-1-xiyou.wangcong@gmail.com
* bpf: Clear per_cpu pointers during bpf_prog_reallocAlexei Starovoitov2021-02-111-0/+2
| | | | | | | | | | bpf_prog_realloc copies contents of struct bpf_prog. The pointers have to be cleared before freeing old struct. Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> Fixes: 700d4796ef59 ("bpf: Optimize program stats") Fixes: ca06f55b9002 ("bpf: Add per-program recursion prevention mechanism") Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* bpf: Add per-program recursion prevention mechanismAlexei Starovoitov2021-02-111-0/+8
| | | | | | | | | | | Since both sleepable and non-sleepable programs execute under migrate_disable add recursion prevention mechanism to both types of programs when they're executed via bpf trampoline. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210033634.62081-5-alexei.starovoitov@gmail.com
* bpf: Optimize program statsAlexei Starovoitov2021-02-111-4/+4
| | | | | | | | | | Move bpf_prog_stats from prog->aux into prog to avoid one extra load in critical path of program execution. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210033634.62081-2-alexei.starovoitov@gmail.com
* bpf: Add bitwise atomic instructionsBrendan Jackman2021-01-141-0/+3
| | | | | | | | | | | | | | | | | | | | | This adds instructions for atomic[64]_[fetch_]and atomic[64]_[fetch_]or atomic[64]_[fetch_]xor All these operations are isomorphic enough to implement with the same verifier, interpreter, and x86 JIT code, hence being a single commit. The main interesting thing here is that x86 doesn't directly support the fetch_ version these operations, so we need to generate a CMPXCHG loop in the JIT. This requires the use of two temporary registers, IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-10-jackmanb@google.com
* bpf: Pull out a macro for interpreting atomic ALU operationsBrendan Jackman2021-01-141-41/+39
| | | | | | | | | | | | | | | | Since the atomic operations that are added in subsequent commits are all isomorphic with BPF_ADD, pull out a macro to avoid the interpreter becoming dominated by lines of atomic-related code. Note that this sacrificies interpreter performance (combining STX_ATOMIC_W and STX_ATOMIC_DW into single switch case means that we need an extra conditional branch to differentiate them) in favour of compact and (relatively!) simple C code. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-9-jackmanb@google.com
* bpf: Add instructions for atomic_[cmp]xchgBrendan Jackman2021-01-141-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds two atomic opcodes, both of which include the BPF_FETCH flag. XCHG without the BPF_FETCH flag would naturally encode atomic_set. This is not supported because it would be of limited value to userspace (it doesn't imply any barriers). CMPXCHG without BPF_FETCH woulud be an atomic compare-and-write. We don't have such an operation in the kernel so it isn't provided to BPF either. There are two significant design decisions made for the CMPXCHG instruction: - To solve the issue that this operation fundamentally has 3 operands, but we only have two register fields. Therefore the operand we compare against (the kernel's API calls it 'old') is hard-coded to be R0. x86 has similar design (and A64 doesn't have this problem). A potential alternative might be to encode the other operand's register number in the immediate field. - The kernel's atomic_cmpxchg returns the old value, while the C11 userspace APIs return a boolean indicating the comparison result. Which should BPF do? A64 returns the old value. x86 returns the old value in the hard-coded register (and also sets a flag). That means return-old-value is easier to JIT, so that's what we use. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com
* bpf: Add BPF_FETCH field / create atomic_fetch_add instructionBrendan Jackman2021-01-141-0/+13
| | | | | | | | | | | | | The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC instructions, in order to have the previous value of the atomically-modified memory location loaded into the src register after an atomic op is carried out. Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com
* bpf: Rename BPF_XADD and prepare to encode other atomics in .immBrendan Jackman2021-01-141-9/+22
| | | | | | | | | | | | | | | | | | | | | A subsequent patch will add additional atomic operations. These new operations will use the same opcode field as the existing XADD, with the immediate discriminating different operations. In preparation, rename the instruction mode BPF_ATOMIC and start calling the zero immediate BPF_ADD. This is possible (doesn't break existing valid BPF progs) because the immediate field is currently reserved MBZ and BPF_ADD is zero. All uses are removed from the tree but the BPF_XADD definition is kept around to avoid breaking builds for people including kernel headers. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
* bpf: Support BPF ksym variables in kernel modulesAndrii Nakryiko2021-01-121-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | Add support for directly accessing kernel module variables from BPF programs using special ldimm64 instructions. This functionality builds upon vmlinux ksym support, but extends ldimm64 with src_reg=BPF_PSEUDO_BTF_ID to allow specifying kernel module BTF's FD in insn[1].imm field. During BPF program load time, verifier will resolve FD to BTF object and will take reference on BTF object itself and, for module BTFs, corresponding module as well, to make sure it won't be unloaded from under running BPF program. The mechanism used is similar to how bpf_prog keeps track of used bpf_maps. One interesting change is also in how per-CPU variable is determined. The logic is to find .data..percpu data section in provided BTF, but both vmlinux and module each have their own .data..percpu entries in BTF. So for module's case, the search for DATASEC record needs to look at only module's added BTF types. This is implemented with custom search function. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/20210112075520.4103414-6-andrii@kernel.org
* bpf: Eliminate rlimit-based memory accounting for bpf progsRoman Gushchin2020-12-021-10/+2
| | | | | | | | | | Do not use rlimit-based memory accounting for bpf progs. It has been replaced with memcg-based memory accounting. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201201215900.3569844-34-guro@fb.com
* bpf: Memcg-based memory accounting for bpf progsRoman Gushchin2020-12-021-5/+5
| | | | | | | | | | | | Include memory used by bpf programs into the memcg-based accounting. This includes the memory used by programs itself, auxiliary data, statistics and bpf line info. A memory cgroup containing the process which loads the program is getting charged. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201201215900.3569844-6-guro@fb.com
* bpf: Add bpf_ktime_get_coarse_ns helperDmitrii Banshchikov2020-11-181-0/+1
| | | | | | | | | | | | | | | | | | | | | The helper uses CLOCK_MONOTONIC_COARSE source of time that is less accurate but more performant. We have a BPF CGROUP_SKB firewall that supports event logging through bpf_perf_event_output(). Each event has a timestamp and currently we use bpf_ktime_get_ns() for it. Use of bpf_ktime_get_coarse_ns() saves ~15-20 ns in time required for event logging. bpf_ktime_get_ns(): EgressLogByRemoteEndpoint 113.82ns 8.79M bpf_ktime_get_coarse_ns(): EgressLogByRemoteEndpoint 95.40ns 10.48M Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201117184549.257280-1-me@ubique.spb.ru
* bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSEArd Biesheuvel2020-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") introduced a __no_fgcse macro that expands to a function scope __attribute__((optimize("-fno-gcse"))), to disable a GCC specific optimization that was causing trouble on x86 builds, and was not expected to have any positive effect in the first place. However, as the GCC manual documents, __attribute__((optimize)) is not for production use, and results in all other optimization options to be forgotten for the function in question. This can cause all kinds of trouble, but in one particular reported case, it causes -fno-asynchronous-unwind-tables to be disregarded, resulting in .eh_frame info to be emitted for the function. This reverts commit 3193c0836, and instead, it disables the -fgcse optimization for the entire source file, but only when building for X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the original commit states that CONFIG_RETPOLINE=n triggers the issue, whereas CONFIG_RETPOLINE=y performs better without the optimization, so it is kept disabled in both cases. Fixes: 3193c0836f20 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org
* Merge tag 'net-next-5.10' of ↵Linus Torvalds2020-10-151-8/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
| * bpf: Move prog->aux->linked_prog and trampoline into bpf_link on attachToke Høiland-Jørgensen2020-09-291-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for allowing multiple attachments of freplace programs, move the references to the target program and trampoline into the bpf_tracing_link structure when that is created. To do this atomically, introduce a new mutex in prog->aux to protect writing to the two pointers to target prog and trampoline, and rename the members to make it clear that they are related. With this change, it is no longer possible to attach the same tracing program multiple times (detaching in-between), since the reference from the tracing program to the target disappears on the first attach. However, since the next patch will let the caller supply an attach target, that will also make it possible to attach to the same place multiple times. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/160138355059.48470.2503076992210324984.stgit@toke.dk
| * bpf: Add bpf_seq_printf_btf helperAlan Maguire2020-09-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A helper is added to allow seq file writing of kernel data structures using vmlinux BTF. Its signature is long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); Flags and struct btf_ptr definitions/use are identical to the bpf_snprintf_btf helper, and the helper returns 0 on success or a negative error value. Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-8-git-send-email-alan.maguire@oracle.com
| * bpf: Add bpf_snprintf_btf helperAlan Maguire2020-09-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A helper is added to support tracing kernel type information in BPF using the BPF Type Format (BTF). Its signature is long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); struct btf_ptr * specifies - a pointer to the data to be traced - the BTF id of the type of data pointed to - a flags field is provided for future use; these flags are not to be confused with the BTF_F_* flags below that control how the btf_ptr is displayed; the flags member of the struct btf_ptr may be used to disambiguate types in kernel versus module BTF, etc; the main distinction is the flags relate to the type and information needed in identifying it; not how it is displayed. For example a BPF program with a struct sk_buff *skb could do the following: static struct btf_ptr b = { }; b.ptr = skb; b.type_id = __builtin_btf_type_id(struct sk_buff, 1); bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0); Default output looks like this: (struct sk_buff){ .transport_header = (__u16)65535, .mac_header = (__u16)65535, .end = (sk_buff_data_t)192, .head = (unsigned char *)0x000000007524fd8b, .data = (unsigned char *)0x000000007524fd8b, .truesize = (unsigned int)768, .users = (refcount_t){ .refs = (atomic_t){ .counter = (int)1, }, }, } Flags modifying display are as follows: - BTF_F_COMPACT: no formatting around type information - BTF_F_NONAME: no struct/union member names/types - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; equivalent to %px. - BTF_F_ZERO: show zero-valued struct/union members; they are not displayed by default Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-4-git-send-email-alan.maguire@oracle.com
| * bpf, x64: rework pro/epilogue and tailcall handling in JITMaciej Fijalkowski2020-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit serves two things: 1) it optimizes BPF prologue/epilogue generation 2) it makes possible to have tailcalls within BPF subprogram Both points are related to each other since without 1), 2) could not be achieved. In [1], Alexei says: "The prologue will look like: nop5 xor eax,eax  // two new bytes if bpf_tail_call() is used in this // function push rbp mov rbp, rsp sub rsp, rounded_stack_depth push rax // zero init tail_call counter variable number of push rbx,r13,r14,r15 Then bpf_tail_call will pop variable number rbx,.. and final 'pop rax' Then 'add rsp, size_of_current_stack_frame' jmp to next function and skip over 'nop5; xor eax,eax; push rpb; mov rbp, rsp' This way new function will set its own stack size and will init tail call counter with whatever value the parent had. If next function doesn't use bpf_tail_call it won't have 'xor eax,eax'. Instead it would need to have 'nop2' in there." Implement that suggestion. Since the layout of stack is changed, tail call counter handling can not rely anymore on popping it to rbx just like it have been handled for constant prologue case and later overwrite of rbx with actual value of rbx pushed to stack. Therefore, let's use one of the register (%rcx) that is considered to be volatile/caller-saved and pop the value of tail call counter in there in the epilogue. Drop the BUILD_BUG_ON in emit_prologue and in emit_bpf_tail_call_indirect where instruction layout is not constant anymore. Introduce new poke target, 'tailcall_bypass' to poke descriptor that is dedicated for skipping the register pops and stack unwind that are generated right before the actual jump to target program. For case when the target program is not present, BPF program will skip the pop instructions and nop5 dedicated for jmpq $target. An example of such state when only R6 of callee saved registers is used by program: ffffffffc0513aa1: e9 0e 00 00 00 jmpq 0xffffffffc0513ab4 ffffffffc0513aa6: 5b pop %rbx ffffffffc0513aa7: 58 pop %rax ffffffffc0513aa8: 48 81 c4 00 00 00 00 add $0x0,%rsp ffffffffc0513aaf: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) ffffffffc0513ab4: 48 89 df mov %rbx,%rdi When target program is inserted, the jump that was there to skip pops/nop5 will become the nop5, so CPU will go over pops and do the actual tailcall. One might ask why there simply can not be pushes after the nop5? In the following example snippet: ffffffffc037030c: 48 89 fb mov %rdi,%rbx (...) ffffffffc0370332: 5b pop %rbx ffffffffc0370333: 58 pop %rax ffffffffc0370334: 48 81 c4 00 00 00 00 add $0x0,%rsp ffffffffc037033b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) ffffffffc0370340: 48 81 ec 00 00 00 00 sub $0x0,%rsp ffffffffc0370347: 50 push %rax ffffffffc0370348: 53 push %rbx ffffffffc0370349: 48 89 df mov %rbx,%rdi ffffffffc037034c: e8 f7 21 00 00 callq 0xffffffffc0372548 There is the bpf2bpf call (at ffffffffc037034c) right after the tailcall and jump target is not present. ctx is in %rbx register and BPF subprogram that we will call into on ffffffffc037034c is relying on it, e.g. it will pick ctx from there. Such code layout is therefore broken as we would overwrite the content of %rbx with the value that was pushed on the prologue. That is the reason for the 'bypass' approach. Special care needs to be taken during the install/update/remove of tailcall target. In case when target program is not present, the CPU must not execute the pop instructions that precede the tailcall. To address that, the following states can be defined: A nop, unwind, nop B nop, unwind, tail C skip, unwind, nop D skip, unwind, tail A is forbidden (lead to incorrectness). The state transitions between tailcall install/update/remove will work as follows: First install tail call f: C->D->B(f) * poke the tailcall, after that get rid of the skip Update tail call f to f': B(f)->B(f') * poke the tailcall (poke->tailcall_target) and do NOT touch the poke->tailcall_bypass Remove tail call: B(f')->C(f') * poke->tailcall_bypass is poked back to jump, then we wait the RCU grace period so that other programs will finish its execution and after that we are safe to remove the poke->tailcall_target Install new tail call (f''): C(f')->D(f'')->B(f''). * same as first step This way CPU can never be exposed to "unwind, tail" state. Last but not least, when tailcalls get mixed with bpf2bpf calls, it would be possible to encounter the endless loop due to clearing the tailcall counter if for example we would use the tailcall3-like from BPF selftests program that would be subprogram-based, meaning the tailcall would be present within the BPF subprogram. This test, broken down to particular steps, would do: entry -> set tailcall counter to 0, bump it by 1, tailcall to func0 func0 -> call subprog_tail (we are NOT skipping the first 11 bytes of prologue and this subprogram has a tailcall, therefore we clear the counter...) subprog -> do the same thing as entry and then loop forever. To address this, the idea is to go through the call chain of bpf2bpf progs and look for a tailcall presence throughout whole chain. If we saw a single tail call then each node in this call chain needs to be marked as a subprog that can reach the tailcall. We would later feed the JIT with this info and: - set eax to 0 only when tailcall is reachable and this is the entry prog - if tailcall is reachable but there's no tailcall in insns of currently JITed prog then push rax anyway, so that it will be possible to propagate further down the call chain - finally if tailcall is reachable, then we need to precede the 'call' insn with mov rax, [rbp - (stack_depth + 8)] Tail call related cases from test_verifier kselftest are also working fine. Sample BPF programs that utilize tail calls (sockex3, tracex5) work properly as well. [1]: https://lore.kernel.org/bpf/20200517043227.2gpq22ifoq37ogst@ast-mbp.dhcp.thefacebook.com/ Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * bpf: rename poke descriptor's 'ip' member to 'tailcall_target'Maciej Fijalkowski2020-09-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Reflect the actual purpose of poke->ip and rename it to poke->tailcall_target so that it will not the be confused with another poke target that will be introduced in next commit. While at it, do the same thing with poke->ip_stable - rename it to poke->tailcall_target_stable. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * bpf: Mutex protect used_maps array and countYiFei Zhu2020-09-151-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support modifying the used_maps array, we use a mutex to protect the use of the counter and the array. The mutex is initialized right after the prog aux is allocated, and destroyed right before prog aux is freed. This way we guarantee it's initialized for both cBPF and eBPF. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Cc: YiFei Zhu <zhuyifei1999@gmail.com> Link: https://lore.kernel.org/bpf/20200915234543.3220146-2-sdf@google.com
* | objtool: Rename frame.h -> objtool.hJulien Thierry2020-09-101-1/+1
|/ | | | | | | | | | | | Header frame.h is getting more code annotations to help objtool analyze object files. Rename the file to objtool.h. [ jpoimboe: add objtool.h to MAINTAINERS ] Signed-off-by: Julien Thierry <jthierry@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
* bpf: Delete repeated words in commentsRandy Dunlap2020-08-071-1/+1
| | | | | | | | Drop repeated words in kernel/bpf/: {has, the} Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200807033141.10437-1-rdunlap@infradead.org
* bpf: Make cgroup storages shared between programs on the same cgroupYiFei Zhu2020-07-251-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
* bpf, netns: Handle multiple link attachmentsJakub Sitnicki2020-07-171-0/+55
| | | | | | | | | | | | | | | Extend the BPF netns link callbacks to rebuild (grow/shrink) or update the prog_array at given position when link gets attached/updated/released. This let's us lift the limit of having just one link attached for the new attach type introduced by subsequent patch. No functional changes intended. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200717103536.397595-2-jakub@cloudflare.com
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2020-06-031-2/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
| * bpf: Fix spelling in comment explaining ARG1 in ___bpf_prog_runChris Packham2020-06-011-1/+1
| | | | | | | | | | | | | | | | | | Change 'handeled' to 'handled'. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525230025.14470-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * bpf: Implement CAP_BPFAlexei Starovoitov2020-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement permissions as stated in uapi/linux/capability.h In order to do that the verifier allow_ptr_leaks flag is split into four flags and they are set as: env->allow_ptr_leaks = bpf_allow_ptr_leaks(); env->bypass_spec_v1 = bpf_bypass_spec_v1(); env->bypass_spec_v4 = bpf_bypass_spec_v4(); env->bpf_capable = bpf_capable(); The first three currently equivalent to perfmon_capable(), since leaking kernel pointers and reading kernel memory via side channel attacks is roughly equivalent to reading kernel memory with cap_perfmon. 'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions, subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the verifier, run time mitigations in bpf array, and enables indirect variable access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code by the verifier. That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN will have speculative checks done by the verifier and other spectre mitigation applied. Such networking BPF program will not be able to leak kernel pointers and will not be able to access arbitrary kernel memory. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com
| * bpf: add bpf_ktime_get_boot_ns()Maciej Żenczykowski2020-04-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | On a device like a cellphone which is constantly suspending and resuming CLOCK_MONOTONIC is not particularly useful for keeping track of or reacting to external network events. Instead you want to use CLOCK_BOOTTIME. Hence add bpf_ktime_get_boot_ns() as a mirror of bpf_ktime_get_ns() based around CLOCK_BOOTTIME instead of CLOCK_MONOTONIC. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * bpf: Fix missing bpf_base_func_proto in cgroup_base_func_proto for CGROUP_NET=nStanislav Fomichev2020-04-261-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linux-next build bot reported compile issue [1] with one of its configs. It looks like when we have CONFIG_NET=n and CONFIG_BPF{,_SYSCALL}=y, we are missing the bpf_base_func_proto definition (from net/core/filter.c) in cgroup_base_func_proto. I'm reshuffling the code a bit to make it work. The common helpers are moved into kernel/bpf/helpers.c and the bpf_base_func_proto is exported from there. Also, bpf_get_raw_cpu_id goes into kernel/bpf/core.c akin to existing bpf_user_rnd_u32. [1] https://lore.kernel.org/linux-next/CAKH8qBsBvKHswiX1nx40LgO+BGeTmb1NX8tiTttt_0uu6T3dCA@mail.gmail.com/T/#mff8b0c083314c68c2e2ef0211cb11bc20dc13c72 Fixes: 0456ea170cd6 ("bpf: Enable more helpers for BPF_PROG_TYPE_CGROUP_{DEVICE,SYSCTL,SOCKOPT}") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200424235941.58382-1-sdf@google.com
* | mm: remove the pgprot argument to __vmallocChristoph Hellwig2020-06-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [hyperv] Acked-by: Gao Xiang <xiang@kernel.org> [erofs] Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | crypto: lib/sha1 - rename "sha" to "sha1"Eric Biggers2020-05-081-9/+9
|/ | | | | | | | | | | | | | | | | | | | The library implementation of the SHA-1 compression function is confusingly called just "sha_transform()". Alongside it are some "SHA_" constants and "sha_init()". Presumably these are left over from a time when SHA just meant SHA-1. But now there are also SHA-2 and SHA-3, and moreover SHA-1 is now considered insecure and thus shouldn't be used. Therefore, rename these functions and constants to make it very clear that they are for SHA-1. Also add a comment to make it clear that these shouldn't be used. For the extra-misleadingly named "SHA_MESSAGE_BYTES", rename it to SHA1_BLOCK_SIZE and define it to just '64' rather than '(512/8)' so that it matches the same definition in <crypto/sha.h>. This prepares for merging <linux/cryptohash.h> into <crypto/sha.h>. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* bpf: Enable bpf cgroup hooks to retrieve cgroup v2 and ancestor idDaniel Borkmann2020-03-271-0/+1
| | | | | | | | | | | | | | | | Enable the bpf_get_current_cgroup_id() helper for connect(), sendmsg(), recvmsg() and bind-related hooks in order to retrieve the cgroup v2 context which can then be used as part of the key for BPF map lookups, for example. Given these hooks operate in process context 'current' is always valid and pointing to the app that is performing mentioned syscalls if it's subject to a v2 cgroup. Also with same motivation of commit 7723628101aa ("bpf: Introduce bpf_skb_ancestor_cgroup_id helper") enable retrieval of ancestor from current so the cgroup id can be used for policy lookups which can then forbid connect() / bind(), for example. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d2a7ef42530ad299e3cbb245e6c12374b72145ef.1585323121.git.daniel@iogearbox.net
* bpf: Add bpf_ksym_add/del functionsJiri Olsa2020-03-131-14/+19
| | | | | | | | | | | | | | | Separating /proc/kallsyms add/del code and adding bpf_ksym_add/del functions for that. Moving bpf_prog_ksym_node_add/del functions to __bpf_ksym_add/del and changing their argument to 'struct bpf_ksym' object. This way we can call them for other bpf objects types like trampoline and dispatcher. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200312195610.346362-10-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* bpf: Add prog flag to struct bpf_ksym objectJiri Olsa2020-03-131-11/+11
| | | | | | | | | | | | | | | | | | | | Adding 'prog' bool flag to 'struct bpf_ksym' to mark that this object belongs to bpf_prog object. This change allows having bpf_prog objects together with other types (trampolines and dispatchers) in the single bpf_tree. It's used when searching for bpf_prog exception tables by the bpf_prog_ksym_find function, where we need to get the bpf_prog pointer. >From now we can safely add bpf_ksym support for trampoline or dispatcher objects, because we can differentiate them from bpf_prog objects. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200312195610.346362-9-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* bpf: Add bpf_ksym_find functionJiri Olsa2020-03-131-7/+15
| | | | | | | | | | | | | | | Adding bpf_ksym_find function that is used bpf bpf address lookup functions: __bpf_address_lookup is_bpf_text_address while keeping bpf_prog_kallsyms_find to be used only for lookup of bpf_prog objects (will happen in following changes). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200312195610.346362-8-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-25 12:37:07 +0000