From 0328edc77d4f35014b35f32b46be0a7e16aae74f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 20 Feb 2017 08:59:16 +0100 Subject: mac80211: fix packet statistics for fast-RX When adding per-CPU statistics, which added statistics back to mac80211 for the fast-RX path, I evidently forgot to add the "stats->packets++" line. The reason for that is likely that I didn't see it since it's done in defragmentation for the regular RX path. Add the missing line to properly count received packets in the fast-RX case. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Reported-by: Oren Givon Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 50ca3828b124..a8443d8bc233 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3880,6 +3880,7 @@ static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx, stats->last_rate = sta_stats_encode_rate(status); stats->fragments++; + stats->packets++; if (!(status->flag & RX_FLAG_NO_SIGNAL_VAL)) { stats->last_signal = status->signal; -- cgit v1.2.3 From a9e9200d8661c1a0be8c39f93deb383dc940de35 Mon Sep 17 00:00:00 2001 From: Matt Chen Date: Sun, 22 Jan 2017 02:16:58 +0800 Subject: mac80211: flush delayed work when entering suspend The issue was found when entering suspend and resume. It triggers a warning in: mac80211/key.c: ieee80211_enable_keys() ... WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || sdata->crypto_tx_tailroom_pending_dec); ... It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully in a delayed_work during suspend. Add a flush_delayed_work to fix it. Cc: stable@vger.kernel.org Signed-off-by: Matt Chen Signed-off-by: Johannes Berg --- net/mac80211/pm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 28a3a0957c9e..76a8bcd8ef11 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -168,6 +168,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) break; } + flush_delayed_work(&sdata->dec_tailroom_needed_wk); drv_remove_interface(local, sdata); } -- cgit v1.2.3 From b7540d8f25c8034de7e4163fc23ac457bf057731 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Mon, 6 Feb 2017 15:28:42 +0200 Subject: mac80211: don't reorder frames with SN smaller than SSN When RX aggregation starts, transmitter may continue send frames with SN smaller than SSN until the AddBA response is received. However, the reorder buffer is already initialized at this point, which will cause the drop of such frames as duplicates since the head SN of the reorder buffer is set to the SSN, which is bigger. Cc: stable@vger.kernel.org Signed-off-by: Sara Sharon Signed-off-by: Johannes Berg --- net/mac80211/agg-rx.c | 1 + net/mac80211/rx.c | 14 +++++++++++++- net/mac80211/sta_info.h | 6 ++++-- 3 files changed, 18 insertions(+), 3 deletions(-) diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index 3b5fd4188f2a..58ad23a44109 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -398,6 +398,7 @@ void __ieee80211_start_rx_ba_session(struct sta_info *sta, tid_agg_rx->timeout = timeout; tid_agg_rx->stored_mpdu_num = 0; tid_agg_rx->auto_seq = auto_seq; + tid_agg_rx->started = false; tid_agg_rx->reorder_buf_filtered = 0; status = WLAN_STATUS_SUCCESS; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index a8443d8bc233..28cc494a774d 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -4,7 +4,7 @@ * Copyright 2006-2007 Jiri Benc * Copyright 2007-2010 Johannes Berg * Copyright 2013-2014 Intel Mobile Communications GmbH - * Copyright(c) 2015 - 2016 Intel Deutschland GmbH + * Copyright(c) 2015 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -1034,6 +1034,18 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata buf_size = tid_agg_rx->buf_size; head_seq_num = tid_agg_rx->head_seq_num; + /* + * If the current MPDU's SN is smaller than the SSN, it shouldn't + * be reordered. + */ + if (unlikely(!tid_agg_rx->started)) { + if (ieee80211_sn_less(mpdu_seq_num, head_seq_num)) { + ret = false; + goto out; + } + tid_agg_rx->started = true; + } + /* frame with out of date sequence number */ if (ieee80211_sn_less(mpdu_seq_num, head_seq_num)) { dev_kfree_skb(skb); diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index dd06ef0b8861..15599c70a38f 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -189,6 +189,7 @@ struct tid_ampdu_tx { * @auto_seq: used for offloaded BA sessions to automatically pick head_seq_and * and ssn. * @removed: this session is removed (but might have been found due to RCU) + * @started: this session has started (head ssn or higher was received) * * This structure's lifetime is managed by RCU, assignments to * the array holding it must hold the aggregation mutex. @@ -212,8 +213,9 @@ struct tid_ampdu_rx { u16 ssn; u16 buf_size; u16 timeout; - bool auto_seq; - bool removed; + u8 auto_seq:1, + removed:1, + started:1; }; /** -- cgit v1.2.3 From 8fbcfeb8a9cc803464d6c166e7991913711c612c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 25 Feb 2017 10:27:37 +0000 Subject: mac80211_hwsim: Replace bogus hrtimer clockid mac80211_hwsim initializes a hrtimer with clockid CLOCK_MONOTONIC_RAW. That's not supported. Use CLOCK_MONOTONIC instead. Signed-off-by: Thomas Gleixner Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 1620a5d2757d..0889fc81ce9e 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2671,7 +2671,7 @@ static int mac80211_hwsim_new_radio(struct genl_info *info, tasklet_hrtimer_init(&data->beacon_timer, mac80211_hwsim_beacon, - CLOCK_MONOTONIC_RAW, HRTIMER_MODE_ABS); + CLOCK_MONOTONIC, HRTIMER_MODE_ABS); spin_lock_bh(&hwsim_radio_lock); list_add_tail(&data->list, &hwsim_radios); -- cgit v1.2.3 From 890030d3c425f49abaa4acf60e20f288b599f980 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 22 Feb 2017 16:16:07 +0100 Subject: mac80211: don't handle filtered frames within a BA session When running a BA session, the driver (or the hardware) already takes care of retransmitting failed frames, since it has to keep the receiver reorder window in sync. Adding another layer of retransmit around that does not improve anything. In fact, it can only lead to some strong reordering with huge latency. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/status.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/status.c b/net/mac80211/status.c index a3af6e1bfd98..05ccd55b5d83 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -51,7 +51,8 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, struct ieee80211_hdr *hdr = (void *)skb->data; int ac; - if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) { + if (info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER | + IEEE80211_TX_CTL_AMPDU)) { ieee80211_free_txskb(&local->hw, skb); return; } -- cgit v1.2.3 From d98937f4ea713d21e0fcc345919f86c877dd8d6f Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 20 Feb 2017 14:24:36 +0100 Subject: mac80211: fix power saving clients handling in iwlwifi iwlwifi now supports RSS and can't let mac80211 track the PS state based on the Rx frames since they can come out of order. iwlwifi is now advertising AP_LINK_PS, and uses explicit notifications to teach mac80211 about the PS state of the stations and the PS poll / uAPSD trigger frames coming our way from the peers. Because of that, the TIM stopped being maintained in mac80211. I tried to fix this in commit c68df2e7be0c ("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE") but that was later reverted by Felix in commit 6c18a6b4e799 ("Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE") since it broke drivers that do not implement set_tim. Since none of the drivers that set AP_LINK_PS have the set_tim() handler set besides iwlwifi, I can bail out in __sta_info_recalc_tim if AP_LINK_PS AND .set_tim is not implemented. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 4774e663a411..8bb99d299cda 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -688,7 +688,7 @@ static void __sta_info_recalc_tim(struct sta_info *sta, bool ignore_pending) } /* No need to do anything if the driver does all */ - if (ieee80211_hw_check(&local->hw, AP_LINK_PS)) + if (ieee80211_hw_check(&local->hw, AP_LINK_PS) && !local->ops->set_tim) return; if (sta->dead) -- cgit v1.2.3 From 2595d259b667114431501bae51b45d6656b987d1 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Mon, 20 Feb 2017 14:24:39 +0100 Subject: mac80211: shorten debug message Tracing is limited to 100 characters and this message passes the limit when there are a few buffered frames. Shorten it. Signed-off-by: Sara Sharon Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 8bb99d299cda..3323a2fb289b 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1264,7 +1264,7 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) sta_info_recalc_tim(sta); ps_dbg(sdata, - "STA %pM aid %d sending %d filtered/%d PS frames since STA not sleeping anymore\n", + "STA %pM aid %d sending %d filtered/%d PS frames since STA woke up\n", sta->sta.addr, sta->sta.aid, filtered, buffered); ieee80211_check_fast_xmit(sta); -- cgit v1.2.3 From 09e0a2fe102208cbaf39510b8b04dd524d7d2935 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Mon, 20 Feb 2017 14:24:38 +0100 Subject: mac80211: fix typo in debug print Signed-off-by: Sara Sharon Signed-off-by: Johannes Berg --- net/mac80211/agg-rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index 58ad23a44109..4456559cb056 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -85,7 +85,7 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, ht_dbg(sta->sdata, "Rx BA session stop requested for %pM tid %u %s reason: %d\n", sta->sta.addr, tid, - initiator == WLAN_BACK_RECIPIENT ? "recipient" : "inititator", + initiator == WLAN_BACK_RECIPIENT ? "recipient" : "initiator", (int)reason); if (drv_ampdu_action(local, sta->sdata, ¶ms)) -- cgit v1.2.3 From ff4dd73dd2b4806419f8ff65cbce11d5019548d0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 27 Feb 2017 17:15:28 +0100 Subject: mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length Unfortunately, the nla policy was defined to have HWSIM_ATTR_RADIO_NAME as an NLA_STRING, rather than NLA_NUL_STRING, so we can't use it as a NUL-terminated string in the kernel. Rather than break the API, kasprintf() the string to a new buffer to guarantee NUL termination. Reported-by: Andrew Zaborowski Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 0889fc81ce9e..50c219fb1a52 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3056,6 +3056,7 @@ static int hwsim_register_received_nl(struct sk_buff *skb_2, static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info) { struct hwsim_new_radio_params param = { 0 }; + const char *hwname = NULL; param.reg_strict = info->attrs[HWSIM_ATTR_REG_STRICT_REG]; param.p2p_device = info->attrs[HWSIM_ATTR_SUPPORT_P2P_DEVICE]; @@ -3069,8 +3070,14 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info) if (info->attrs[HWSIM_ATTR_NO_VIF]) param.no_vif = true; - if (info->attrs[HWSIM_ATTR_RADIO_NAME]) - param.hwname = nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]); + if (info->attrs[HWSIM_ATTR_RADIO_NAME]) { + hwname = kasprintf(GFP_KERNEL, "%.*s", + nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]), + (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME])); + if (!hwname) + return -ENOMEM; + param.hwname = hwname; + } if (info->attrs[HWSIM_ATTR_USE_CHANCTX]) param.use_chanctx = true; @@ -3098,11 +3105,15 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info) s64 idx = -1; const char *hwname = NULL; - if (info->attrs[HWSIM_ATTR_RADIO_ID]) + if (info->attrs[HWSIM_ATTR_RADIO_ID]) { idx = nla_get_u32(info->attrs[HWSIM_ATTR_RADIO_ID]); - else if (info->attrs[HWSIM_ATTR_RADIO_NAME]) - hwname = (void *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]); - else + } else if (info->attrs[HWSIM_ATTR_RADIO_NAME]) { + hwname = kasprintf(GFP_KERNEL, "%.*s", + nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]), + (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME])); + if (!hwname) + return -ENOMEM; + } else return -EINVAL; spin_lock_bh(&hwsim_radio_lock); @@ -3111,7 +3122,8 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info) if (data->idx != idx) continue; } else { - if (strcmp(hwname, wiphy_name(data->hw->wiphy))) + if (!hwname || + strcmp(hwname, wiphy_name(data->hw->wiphy))) continue; } @@ -3122,10 +3134,12 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info) spin_unlock_bh(&hwsim_radio_lock); mac80211_hwsim_del_radio(data, wiphy_name(data->hw->wiphy), info); + kfree(hwname); return 0; } spin_unlock_bh(&hwsim_radio_lock); + kfree(hwname); return -ENODEV; } -- cgit v1.2.3 From 19d19e960598161be92a7e4828eb7706c6410ce6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 27 Feb 2017 09:38:11 +0100 Subject: mac80211: use driver-indicated transmitter STA only for data frames MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When I originally introduced using the driver-indicated station as an optimisation to avoid the hashtable lookup/iteration, of course it wasn't intended to really functionally change anything. I neglected, however, to take into account VLAN interfaces, which have the property that management and data frames are handled differently: data frames go directly to the station and the VLAN while management frames continue to be processed over the underlying/associated AP-type interface. As a consequence, when a driver used this optimisation for management frames and the user enabled VLANs, my change broke things since any management frames, particularly disassoc/deauth, were missed by hostapd. Fix this by restoring the original code path for non-data frames, they aren't critical for performance to begin with. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194713. Big thanks goes to Jarek who bisected the issue and provided a very detailed bug report, including the crucial information that he was using VLANs in his configuration. Cc: stable@vger.kernel.org Fixes: 771e846bea9e ("mac80211: allow passing transmitter station on RX") Reported-and-tested-by: Jarek Kamiński Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 28cc494a774d..e48724a6725e 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -4086,15 +4086,17 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, ieee80211_is_beacon(hdr->frame_control))) ieee80211_scan_rx(local, skb); - if (pubsta) { - rx.sta = container_of(pubsta, struct sta_info, sta); - rx.sdata = rx.sta->sdata; - if (ieee80211_prepare_and_rx_handle(&rx, skb, true)) - return; - goto out; - } else if (ieee80211_is_data(fc)) { + if (ieee80211_is_data(fc)) { struct sta_info *sta, *prev_sta; + if (pubsta) { + rx.sta = container_of(pubsta, struct sta_info, sta); + rx.sdata = rx.sta->sdata; + if (ieee80211_prepare_and_rx_handle(&rx, skb, true)) + return; + goto out; + } + prev_sta = NULL; for_each_sta_info(local, hdr->addr2, sta, tmp) { -- cgit v1.2.3