From 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 13 Mar 2013 17:11:59 +0100 Subject: mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add pdc support and runtime capabilities detection") which removed the need for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the compile guards around dma_release_channel() in remove(). Consequently, DMA is always enabled (if supported), but the DMA-channel is not released on module unload unless the DMA-config option is selected. Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely. Signed-off-by: Johan Hovold Acked-by: Ludovic Desroches Cc: stable Signed-off-by: Chris Ball --- arch/arm/configs/at91sam9g45_defconfig | 1 - arch/avr32/configs/favr-32_defconfig | 1 - arch/avr32/configs/merisc_defconfig | 1 - drivers/mmc/host/Kconfig | 10 ---------- drivers/mmc/host/atmel-mci.c | 2 -- 5 files changed, 15 deletions(-) diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 606d48f3b8f8..8aab786863df 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -173,7 +173,6 @@ CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=y -CONFIG_MMC_ATMELMCI_DMA=y CONFIG_LEDS_ATMEL_PWM=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig index 0421498d666b..97918204f795 100644 --- a/arch/avr32/configs/favr-32_defconfig +++ b/arch/avr32/configs/favr-32_defconfig @@ -122,7 +122,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y -CONFIG_MMC_ATMELMCI_DMA=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_ATMEL_PWM=m diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig index 3befab966827..65de4431108c 100644 --- a/arch/avr32/configs/merisc_defconfig +++ b/arch/avr32/configs/merisc_defconfig @@ -102,7 +102,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y -CONFIG_MMC_ATMELMCI_DMA=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_ATMEL_PWM=y diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d88219e1d86e..9c581c2ed349 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -300,16 +300,6 @@ config MMC_ATMELMCI If unsure, say N. -config MMC_ATMELMCI_DMA - bool "Atmel MCI DMA support" - depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE - help - Say Y here to have the Atmel MCI driver use a DMA engine to - do data transfers and thus increase the throughput and - reduce the CPU utilization. - - If unsure, say N. - config MMC_MSM tristate "Qualcomm SDCC Controller Support" depends on MMC && ARCH_MSM diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 722af1de7967..10f8b7358e57 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2487,10 +2487,8 @@ static int __exit atmci_remove(struct platform_device *pdev) atmci_readl(host, ATMCI_SR); clk_disable(host->mck); -#ifdef CONFIG_MMC_ATMELMCI_DMA if (host->dma.chan) dma_release_channel(host->dma.chan); -#endif free_irq(platform_get_irq(pdev, 0), host); iounmap(host->regs); -- cgit v1.2.3