From af901ca181d92aac3a7dc265144a9081a86d8f39 Mon Sep 17 00:00:00 2001 From: André Goddard Rosa Date: Sat, 14 Nov 2009 13:09:05 -0200 Subject: tree-wide: fix assorted typos all over the place MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa Signed-off-by: Jiri Kosina --- Documentation/ABI/testing/procfs-diskstats | 2 +- Documentation/ABI/testing/sysfs-block | 2 +- Documentation/DocBook/mtdnand.tmpl | 2 +- Documentation/DocBook/v4l/videodev2.h.xml | 2 +- Documentation/DocBook/writing-an-alsa-driver.tmpl | 2 +- Documentation/dvb/README.dvb-usb | 2 +- Documentation/lguest/lguest.c | 2 +- Documentation/scsi/ChangeLog.megaraid_sas | 2 +- Documentation/spi/spi-summary | 2 +- Documentation/sysctl/vm.txt | 2 +- Documentation/video4linux/gspca.txt | 2 +- Documentation/vm/page-types.c | 2 +- arch/alpha/mm/numa.c | 2 +- arch/arm/common/scoop.c | 2 +- .../mach-bcmring/include/mach/csp/dmacHw_priv.h | 2 +- arch/arm/mach-bcmring/include/mach/dma.h | 2 +- arch/arm/mach-lh7a40x/include/mach/hardware.h | 2 +- arch/arm/mach-orion5x/pci.c | 2 +- arch/arm/mach-pxa/include/mach/palmld.h | 2 +- arch/arm/mach-pxa/include/mach/palmt5.h | 2 +- arch/arm/mach-pxa/include/mach/palmtc.h | 2 +- arch/arm/mach-pxa/include/mach/palmte2.h | 2 +- arch/arm/mach-pxa/include/mach/palmtx.h | 2 +- arch/arm/mach-pxa/include/mach/palmz72.h | 2 +- arch/arm/mach-s3c6400/setup-sdhci.c | 2 +- arch/arm/mach-s3c6410/setup-sdhci.c | 2 +- arch/arm/mach-sa1100/dma.c | 2 +- arch/arm/plat-mxc/include/mach/iomux-mx3.h | 2 +- arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 2 +- arch/arm/plat-mxc/pwm.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/include/mach/omap16xx.h | 2 +- arch/arm/plat-s3c24xx/include/plat/map.h | 2 +- arch/avr32/boards/hammerhead/Kconfig | 2 +- arch/blackfin/kernel/traps.c | 2 +- .../mach-bf518/include/mach/defBF51x_base.h | 4 +- .../mach-bf527/include/mach/defBF52x_base.h | 4 +- arch/blackfin/mach-bf537/include/mach/defBF534.h | 4 +- arch/blackfin/mach-bf548/include/mach/defBF544.h | 4 +- arch/blackfin/mach-bf548/include/mach/defBF547.h | 4 +- arch/blackfin/mach-bf548/include/mach/defBF548.h | 4 +- arch/blackfin/mach-bf548/include/mach/defBF549.h | 4 +- arch/cris/mm/fault.c | 2 +- arch/ia64/hp/common/sba_iommu.c | 2 +- arch/ia64/ia32/ia32_entry.S | 2 +- arch/ia64/include/asm/perfmon_default_smpl.h | 2 +- arch/ia64/include/asm/sn/shubio.h | 2 +- arch/ia64/kernel/esi.c | 2 +- arch/ia64/kernel/perfmon.c | 2 +- arch/m68k/ifpsp060/src/fpsp.S | 28 +++++----- arch/m68k/ifpsp060/src/pfpsp.S | 26 ++++----- arch/m68k/include/asm/bootinfo.h | 2 +- arch/microblaze/lib/memcpy.c | 2 +- arch/microblaze/lib/memmove.c | 2 +- arch/microblaze/lib/memset.c | 2 +- arch/mips/include/asm/mach-pnx833x/gpio.h | 2 +- arch/mips/include/asm/sgi/ioc.h | 2 +- arch/mips/include/asm/sibyte/sb1250_mac.h | 2 +- arch/mips/include/asm/sn/sn0/hubio.h | 2 +- arch/mips/kernel/smtc.c | 2 +- arch/mips/math-emu/dp_sub.c | 2 +- arch/mips/txx9/generic/smsc_fdc37m81x.c | 2 +- arch/powerpc/include/asm/reg_fsl_emb.h | 2 +- arch/powerpc/kernel/kgdb.c | 2 +- arch/powerpc/kernel/tau_6xx.c | 2 +- arch/powerpc/oprofile/op_model_cell.c | 4 +- arch/powerpc/platforms/52xx/mpc52xx_pci.c | 2 +- arch/powerpc/platforms/powermac/pci.c | 2 +- arch/powerpc/sysdev/dart_iommu.c | 2 +- arch/s390/math-emu/math.c | 4 +- arch/x86/include/asm/desc_defs.h | 4 +- arch/x86/include/asm/mmzone_32.h | 2 +- arch/x86/include/asm/uv/uv_bau.h | 2 +- arch/x86/kernel/acpi/boot.c | 2 +- arch/x86/kernel/amd_iommu.c | 4 +- arch/x86/kernel/cpu/perf_event.c | 2 +- arch/x86/kernel/kprobes.c | 4 +- arch/x86/mm/kmmio.c | 4 +- block/blk-iopoll.c | 2 +- drivers/ata/ata_piix.c | 2 +- drivers/ata/sata_fsl.c | 6 +-- drivers/atm/iphase.c | 2 +- drivers/base/dd.c | 2 +- drivers/bluetooth/btmrvl_sdio.c | 2 +- drivers/bluetooth/hci_ldisc.c | 2 +- drivers/char/mem.c | 2 +- drivers/char/mspec.c | 2 +- drivers/char/n_r3964.c | 2 +- drivers/char/rio/route.h | 2 +- drivers/crypto/hifn_795x.c | 2 +- drivers/dma/at_hdmac.c | 2 +- drivers/firewire/core-topology.c | 2 +- drivers/gpu/drm/drm_crtc.c | 4 +- drivers/gpu/drm/i915/i915_gem.c | 2 +- drivers/gpu/drm/i915/intel_fb.c | 2 +- drivers/gpu/drm/i915/intel_sdvo.c | 2 +- drivers/gpu/drm/radeon/r600.c | 4 +- drivers/gpu/drm/radeon/radeon_fb.c | 2 +- drivers/gpu/drm/radeon/radeon_state.c | 2 +- drivers/gpu/drm/radeon/radeon_ttm.c | 2 +- drivers/gpu/drm/radeon/rv770.c | 4 +- drivers/gpu/drm/ttm/ttm_bo_util.c | 2 +- drivers/hwmon/adm1029.c | 2 +- drivers/hwmon/lm93.c | 2 +- drivers/ieee1394/dv1394.c | 2 +- drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 +- drivers/infiniband/hw/ipath/ipath_sd7220.c | 4 +- drivers/infiniband/hw/mlx4/qp.c | 2 +- drivers/input/serio/hp_sdc.c | 2 +- drivers/input/serio/hp_sdc_mlc.c | 2 +- drivers/input/touchscreen/atmel-wm97xx.c | 2 +- drivers/input/touchscreen/mainstone-wm97xx.c | 4 +- drivers/input/touchscreen/zylonite-wm97xx.c | 2 +- drivers/isdn/capi/capidrv.c | 2 +- drivers/isdn/hardware/eicon/di.c | 2 +- drivers/isdn/hardware/eicon/maintidi.c | 4 +- drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +- drivers/isdn/hardware/mISDN/hfcsusb.h | 2 +- drivers/isdn/hardware/mISDN/mISDNisar.c | 2 +- drivers/isdn/hisax/hfc_usb.c | 2 +- drivers/isdn/i4l/isdn_ppp.c | 6 +-- drivers/isdn/i4l/isdn_ttyfax.c | 2 +- drivers/isdn/mISDN/dsp_core.c | 2 +- drivers/isdn/mISDN/tei.c | 2 +- drivers/macintosh/therm_windtunnel.c | 2 +- drivers/media/common/saa7146_i2c.c | 2 +- drivers/media/dvb/dvb-core/dvb_frontend.h | 2 +- drivers/media/dvb/dvb-usb/anysee.c | 2 +- drivers/media/dvb/dvb-usb/dibusb-mb.c | 2 +- drivers/media/dvb/dvb-usb/dvb-usb-remote.c | 2 +- drivers/media/dvb/dvb-usb/usb-urb.c | 4 +- drivers/media/dvb/frontends/au8522_decoder.c | 2 +- drivers/media/dvb/frontends/cx24110.c | 4 +- drivers/media/dvb/frontends/cx24113.c | 2 +- drivers/media/dvb/frontends/dib3000mb.c | 2 +- drivers/media/dvb/frontends/lgdt330x.c | 4 +- drivers/media/dvb/frontends/stb0899_drv.c | 2 +- drivers/media/dvb/ttpci/av7110.c | 4 +- drivers/media/dvb/ttpci/budget-patch.c | 2 +- drivers/media/radio/radio-mr800.c | 2 +- drivers/media/video/cx231xx/cx231xx-avcore.c | 8 +-- drivers/media/video/cx23885/cx23885-dvb.c | 2 +- drivers/media/video/cx88/cx88-core.c | 2 +- drivers/media/video/davinci/dm355_ccdc.c | 2 +- drivers/media/video/davinci/vpss.c | 2 +- drivers/media/video/gspca/sonixb.c | 2 +- drivers/media/video/gspca/spca500.c | 2 +- drivers/media/video/gspca/spca501.c | 6 +-- drivers/media/video/gspca/sunplus.c | 2 +- drivers/media/video/gspca/zc3xx.c | 2 +- drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 2 +- drivers/media/video/s2255drv.c | 2 +- drivers/media/video/zoran/zoran.h | 2 +- drivers/message/i2o/i2o_block.c | 2 +- drivers/message/i2o/iop.c | 4 +- drivers/misc/sgi-gru/grufile.c | 2 +- drivers/mmc/host/s3cmci.c | 2 +- drivers/mtd/devices/slram.c | 2 +- drivers/mtd/nand/diskonchip.c | 2 +- drivers/mtd/nand/nand_ecc.c | 2 +- drivers/mtd/nand/s3c2410.c | 2 +- drivers/net/82596.c | 2 +- drivers/net/amd8111e.c | 7 ++- drivers/net/appletalk/cops.c | 2 +- drivers/net/ariadne.h | 2 +- drivers/net/atl1c/atl1c_main.c | 2 +- drivers/net/benet/be_cmds.h | 2 +- drivers/net/benet/be_main.c | 2 +- drivers/net/bnx2x_reg.h | 2 +- drivers/net/cxgb3/sge.c | 2 +- drivers/net/ehea/ehea_ethtool.c | 4 +- drivers/net/hamradio/baycom_ser_fdx.c | 2 +- drivers/net/iseries_veth.c | 2 +- drivers/net/lasi_82596.c | 2 +- drivers/net/lib82596.c | 2 +- drivers/net/mlx4/en_rx.c | 2 +- drivers/net/mlx4/en_tx.c | 2 +- drivers/net/mlx4/mlx4_en.h | 2 +- drivers/net/ps3_gelic_net.c | 2 +- drivers/net/sis900.c | 4 +- drivers/net/skfp/h/smc.h | 8 +-- drivers/net/skfp/skfddi.c | 2 +- drivers/net/smsc911x.c | 2 +- drivers/net/smsc911x.h | 2 +- drivers/net/spider_net.c | 2 +- drivers/net/stmmac/gmac.c | 2 +- drivers/net/stmmac/gmac.h | 4 +- drivers/net/tokenring/smctr.c | 2 +- drivers/net/ucc_geth.c | 2 +- drivers/net/ucc_geth.h | 20 +++---- drivers/net/usb/smsc95xx.c | 2 +- drivers/net/wan/lmc/lmc_main.c | 2 +- drivers/net/wimax/i2400m/rx.c | 2 +- drivers/net/wireless/ath/ath5k/phy.c | 6 +-- drivers/net/wireless/ath/ath9k/rc.c | 2 +- drivers/net/wireless/ipw2x00/ipw2100.c | 6 +-- drivers/net/wireless/ipw2x00/ipw2200.c | 8 +-- drivers/net/wireless/ipw2x00/libipw_module.c | 2 +- drivers/net/wireless/iwmc3200wifi/hal.c | 2 +- drivers/net/wireless/iwmc3200wifi/rx.c | 2 +- drivers/net/wireless/libertas/if_sdio.c | 2 +- drivers/net/wireless/prism54/isl_ioctl.c | 4 +- drivers/net/wireless/rt2x00/rt2400pci.h | 2 +- drivers/net/wireless/rt2x00/rt2500pci.h | 2 +- drivers/net/wireless/rt2x00/rt2500usb.h | 2 +- drivers/net/wireless/rt2x00/rt61pci.h | 2 +- drivers/net/wireless/rt2x00/rt73usb.h | 2 +- drivers/net/wireless/wavelan_cs.c | 2 +- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- drivers/parisc/ccio-dma.c | 2 +- drivers/platform/x86/thinkpad_acpi.c | 2 +- drivers/pnp/pnpbios/rsparser.c | 8 +-- drivers/ps3/ps3-sys-manager.c | 2 +- drivers/rtc/rtc-v3020.c | 2 +- drivers/s390/char/fs3270.c | 2 +- drivers/s390/cio/chp.c | 2 +- drivers/s390/cio/cmf.c | 2 +- drivers/sbus/char/envctrl.c | 4 +- drivers/scsi/53c700.c | 2 +- drivers/scsi/aacraid/aacraid.h | 6 +-- drivers/scsi/aacraid/comminit.c | 2 +- drivers/scsi/aic7xxx/aic79xx.seq | 2 +- drivers/scsi/aic7xxx/aic79xx_core.c | 2 +- drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +- drivers/scsi/bfa/include/defs/bfa_defs_pport.h | 2 +- drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h | 2 +- drivers/scsi/hptiop.c | 2 +- drivers/scsi/libfc/fc_lport.c | 2 +- drivers/scsi/libiscsi_tcp.c | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 4 +- drivers/scsi/lpfc/lpfc_els.c | 4 +- drivers/scsi/lpfc/lpfc_init.c | 62 +++++++++++----------- drivers/scsi/lpfc/lpfc_sli.c | 10 ++-- drivers/scsi/megaraid.h | 2 +- drivers/scsi/megaraid/mbox_defs.h | 2 +- drivers/scsi/megaraid/megaraid_mbox.c | 2 +- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 2 +- drivers/scsi/ncr53c8xx.c | 2 +- drivers/scsi/pmcraid.c | 6 +-- drivers/scsi/pmcraid.h | 6 +-- drivers/scsi/scsi_netlink.c | 2 +- drivers/scsi/scsi_transport_sas.c | 6 +-- drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +- drivers/scsi/sym53c8xx_2/sym_hipd.c | 2 +- drivers/scsi/sym53c8xx_2/sym_hipd.h | 2 +- drivers/serial/8250_pnp.c | 4 +- drivers/serial/pmac_zilog.h | 2 +- drivers/serial/ucc_uart.c | 2 +- drivers/telephony/ixj.c | 4 +- drivers/usb/atm/ueagle-atm.c | 2 +- drivers/usb/class/usbtmc.c | 2 +- drivers/usb/core/message.c | 2 +- drivers/usb/gadget/f_acm.c | 2 +- drivers/usb/gadget/pxa27x_udc.c | 2 +- drivers/usb/host/fhci-sched.c | 2 +- drivers/usb/wusbcore/crypto.c | 2 +- drivers/usb/wusbcore/wa-xfer.c | 4 +- drivers/uwb/i1480/dfu/usb.c | 2 +- drivers/uwb/wlp/txrx.c | 2 +- drivers/video/aty/atyfb_base.c | 4 +- drivers/video/backlight/atmel-pwm-bl.c | 2 +- drivers/video/backlight/tosa_lcd.c | 2 +- drivers/video/console/sticore.c | 2 +- drivers/video/gbefb.c | 2 +- drivers/video/stifb.c | 4 +- drivers/video/tdfxfb.c | 2 +- drivers/video/via/dvi.c | 4 +- drivers/video/vt8623fb.c | 2 +- drivers/watchdog/coh901327_wdt.c | 2 +- drivers/watchdog/machzwd.c | 2 +- drivers/watchdog/wdrtas.c | 6 +-- fs/binfmt_elf.c | 2 +- fs/bio.c | 2 +- fs/btrfs/extent_map.c | 2 +- fs/cifs/README | 2 +- fs/cifs/cifsglob.h | 2 +- fs/cifs/inode.c | 4 +- fs/cifs/smbdes.c | 2 +- fs/dlm/plock.c | 2 +- fs/ext4/inode.c | 6 +-- fs/ext4/mballoc.c | 2 +- fs/jffs2/compr.c | 2 +- fs/jffs2/readinode.c | 2 +- fs/jffs2/xattr.c | 2 +- fs/jfs/jfs_dmap.c | 4 +- fs/ncpfs/ioctl.c | 2 +- fs/ntfs/compress.c | 2 +- fs/ntfs/file.c | 4 +- fs/ntfs/logfile.c | 2 +- fs/ocfs2/alloc.c | 2 +- fs/ocfs2/dlm/dlmmaster.c | 2 +- fs/ocfs2/dlmglue.c | 2 +- fs/ocfs2/journal.c | 2 +- fs/ocfs2/refcounttree.c | 2 +- fs/omfs/bitmap.c | 2 +- fs/ubifs/recovery.c | 2 +- fs/xfs/quota/xfs_dquot.h | 2 +- include/asm-generic/memory_model.h | 2 +- include/asm-generic/unistd.h | 2 +- include/linux/chio.h | 2 +- include/linux/mfd/ezx-pcap.h | 4 +- include/linux/pktcdvd.h | 2 +- include/linux/serial_reg.h | 8 +-- include/linux/videodev2.h | 2 +- include/net/sctp/structs.h | 2 +- include/net/tcp.h | 2 +- include/net/wimax.h | 2 +- include/sound/wm8993.h | 2 +- kernel/perf_event.c | 4 +- lib/Kconfig.debug | 2 +- lib/decompress_bunzip2.c | 2 +- lib/dma-debug.c | 2 +- lib/swiotlb.c | 2 +- mm/filemap.c | 2 +- mm/memcontrol.c | 4 +- mm/memory-failure.c | 2 +- net/ipv4/netfilter/ipt_ECN.c | 2 +- net/irda/irlap.c | 14 ++--- net/irda/irlap_event.c | 2 +- net/irda/irlmp.c | 4 +- net/mac80211/mesh_pathtbl.c | 4 +- net/netlabel/netlabel_domainhash.c | 2 +- net/sctp/sm_sideeffect.c | 2 +- net/sunrpc/xprtrdma/svc_rdma_sendto.c | 2 +- net/wimax/op-reset.c | 2 +- scripts/kconfig/mconf.c | 2 +- security/selinux/netlabel.c | 2 +- security/selinux/ss/services.c | 2 +- sound/Kconfig | 2 +- sound/isa/cs423x/cs4236.c | 2 +- sound/isa/opti9xx/miro.c | 2 +- sound/isa/opti9xx/opti92x-ad1848.c | 2 +- sound/oss/dmasound/dmasound_paula.c | 2 +- sound/pci/ca0106/ca0106_proc.c | 2 +- sound/pci/cs46xx/imgs/cwcdma.asp | 9 ++-- sound/pci/emu10k1/emu10k1x.c | 2 +- sound/pci/hda/patch_cmedia.c | 2 +- sound/pci/hda/patch_realtek.c | 2 +- sound/pci/rme9652/hdspm.c | 4 +- sound/soc/codecs/uda134x.c | 4 +- sound/soc/codecs/wm8903.c | 6 +-- sound/soc/codecs/wm8993.c | 4 +- sound/soc/s3c24xx/s3c24xx_simtec.c | 2 +- sound/soc/s6000/s6000-pcm.c | 2 +- sound/sound_core.c | 2 +- 345 files changed, 516 insertions(+), 508 deletions(-) diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats index 99233902e09e..f91a973a37fe 100644 --- a/Documentation/ABI/testing/procfs-diskstats +++ b/Documentation/ABI/testing/procfs-diskstats @@ -8,7 +8,7 @@ Description: 1 - major number 2 - minor mumber 3 - device name - 4 - reads completed succesfully + 4 - reads completed successfully 5 - reads merged 6 - sectors read 7 - time spent reading (ms) diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 5f3bedaf8e35..d2f90334bb93 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -4,7 +4,7 @@ Contact: Jerome Marchand Description: The /sys/block//stat files displays the I/O statistics of disk . They contain 11 fields: - 1 - reads completed succesfully + 1 - reads completed successfully 2 - reads merged 3 - sectors read 4 - time spent reading (ms) diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index df0d089d0fb9..f508a8a27fea 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -362,7 +362,7 @@ module_exit(board_cleanup); Multiple chip control - The nand driver can control chip arrays. Therefor the + The nand driver can control chip arrays. Therefore the board driver must provide an own select_chip function. This function must (de)select the requested chip. The function pointer in the nand_chip structure must diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml index 97002060ac4f..26303e58345f 100644 --- a/Documentation/DocBook/v4l/videodev2.h.xml +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -492,7 +492,7 @@ struct v4l2_jpegcompression { * you do, leave them untouched. * Inluding less markers will make the * resulting code smaller, but there will - * be fewer aplications which can read it. + * be fewer applications which can read it. * The presence of the APP and COM marker * is influenced by APP_len and COM_len * ONLY, not by this property! */ diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index 7a2e0e98986a..0d0f7b4d4b1a 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -5318,7 +5318,7 @@ struct _snd_pcm_runtime { pages of the given size and map them onto the virtually contiguous memory. The virtual pointer is addressed in runtime->dma_area. The physical address (runtime->dma_addr) is set to zero, - because the buffer is physically non-contigous. + because the buffer is physically non-contiguous. The physical address table is set up in sgbuf->table. You can get the physical address at a certain offset via snd_pcm_sgbuf_get_addr(). diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index bf2a9cdfe7bb..c8238e44ed6b 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -85,7 +85,7 @@ http://www.linuxtv.org/wiki/index.php/DVB_USB - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems better settled there (added xfer_ops-struct) - created a common files for frontends (mc/p/mb) - 2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek) + 2004-09-28 - added support for a new device (Unknown, vendor ID is Hyper-Paltek) 2004-09-20 - added support for a new device (Compro DVB-U2000), thanks to Amaury Demol for reporting - changed usb TS transfer method (several urbs, stopping transfer diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 098de5bce00a..42208511b5c0 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -304,7 +304,7 @@ static void *map_zeroed_pages(unsigned int num) addr = mmap(NULL, getpagesize() * num, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0); if (addr == MAP_FAILED) - err(1, "Mmaping %u pages of /dev/zero", num); + err(1, "Mmapping %u pages of /dev/zero", num); /* * One neat mmap feature is that you can close the fd, and it diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index c851ef497795..84524e0cf9c3 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -185,7 +185,7 @@ ii. FW enables WCE bit in Mode Sense cmd for drives that are configured Disks are exposed with WCE=1. User is advised to enable Write Back mode only when the controller has battery backup. At this time Synhronize cache is not supported by the FW. Driver will short-cycle - the cmd and return sucess without sending down to FW. + the cmd and return success without sending down to FW. 1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 - Sumant Patro /Bo Yang diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index deab51ddc33e..4884cb33845d 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -538,7 +538,7 @@ SPI MESSAGE QUEUE The bulk of the driver will be managing the I/O queue fed by transfer(). That queue could be purely conceptual. For example, a driver used only -for low-frequency sensor acess might be fine using synchronous PIO. +for low-frequency sensor access might be fine using synchronous PIO. But the queue will probably be very real, using message->queue, PIO, often DMA (especially if the root filesystem is in SPI flash), and diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index a6e360d2055c..fc5790d36cd9 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -370,7 +370,7 @@ The default is 1 percent. mmap_min_addr This file indicates the amount of address space which a user process will -be restricted from mmaping. Since kernel null dereference bugs could +be restricted from mmapping. Since kernel null dereference bugs could accidentally operate based on the information in the first couple of pages of memory userspace processes should not be allowed to write to them. By default this value is set to 0 and no protections will be enforced by the diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 3f61825be499..6b29555b58b7 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -6,7 +6,7 @@ The modules are: xxxx vend:prod ---- -spca501 0000:0000 MystFromOri Unknow Camera +spca501 0000:0000 MystFromOri Unknown Camera m5602 0402:5602 ALi Video Camera Controller spca501 040a:0002 Kodak DVC-325 spca500 040a:0300 Kodak EZ200 diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c index 3ec4f2a22585..aa7f4d0639c4 100644 --- a/Documentation/vm/page-types.c +++ b/Documentation/vm/page-types.c @@ -301,7 +301,7 @@ static char *page_flag_name(uint64_t flags) present = (flags >> i) & 1; if (!page_flag_names[i]) { if (present) - fatal("unkown flag bit %d\n", i); + fatal("unknown flag bit %d\n", i); continue; } buf[j++] = present ? page_flag_names[i][0] : '_'; diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 10b403554b65..7b2c56d8f930 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -197,7 +197,7 @@ setup_memory_node(int nid, void *kernel_end) } if (bootmap_start == -1) - panic("couldn't find a contigous place for the bootmap"); + panic("couldn't find a contiguous place for the bootmap"); /* Allocate the bootmap and mark the whole MM as reserved. */ bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start, diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 7713a08bb10c..37bda5f3dde3 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) { struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); - /* XXX: I'm usure, but it seems so */ + /* XXX: I'm unsure, but it seems so */ return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); } diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index 375066ad0186..cbf334d1c761 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -83,7 +83,7 @@ typedef struct { * @brief Get next available transaction width * * -* @return On sucess : Next avail able transaction width +* @return On success : Next available transaction width * On failure : dmacHw_TRANSACTION_WIDTH_8 * * @note diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 847980c85c88..1f2c5319c056 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about t /** * Creates a descriptor ring from a memory mapping. * -* @return 0 on sucess, error code otherwise. +* @return 0 on success, error code otherwise. */ /****************************************************************************/ diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h index 48e827d2fa56..59d2ace35217 100644 --- a/arch/arm/mach-lh7a40x/include/mach/hardware.h +++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h @@ -31,7 +31,7 @@ /* * This __REG() version gives the same results as the one above, except * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc + * assembly code for access to contiguous registers. It's a shame that gcc * doesn't guess this by itself. */ #include diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 36dc5413cc97..bdf96eb523bc 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) writel(win_enable, PCI_BAR_ENABLE); /* - * Disable automatic update of address remaping when writing to BARs. + * Disable automatic update of address remapping when writing to BARs. */ orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); } diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 8721b8010221..ae536e86d8e8 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -91,7 +91,7 @@ /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */ #define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ #define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ #define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index d15662aba008..6baf7469d4ec 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -66,7 +66,7 @@ /* BATTERY */ #define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */ #define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ #define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ #define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3dc9b074ab46..3f9dd3fd4638 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -68,7 +68,7 @@ /* BATTERY */ #define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTC_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTC_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTC_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h index 12361341f9d8..f89e989a7637 100644 --- a/arch/arm/mach-pxa/include/mach/palmte2.h +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -59,7 +59,7 @@ /* BATTERY */ #define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1be0db6ed55e..10abc4f2e8e4 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -94,7 +94,7 @@ /* BATTERY */ #define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2806ef69ba5a..2bbcf70dd935 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -49,7 +49,7 @@ /* Battery */ #define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */ #define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c index b93dafbee1f4..1039937403be 100644 --- a/arch/arm/mach-s3c6400/setup-sdhci.c +++ b/arch/arm/mach-s3c6400/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c index 20666f3bd478..816d2d9f9ef8 100644 --- a/arch/arm/mach-s3c6410/setup-sdhci.c +++ b/arch/arm/mach-s3c6410/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index cb4521a6f42d..ad660350c296 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c @@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) /** - * sa1100_request_dma - allocate one of the SA11x0's DMA chanels + * sa1100_request_dma - allocate one of the SA11x0's DMA channels * @device: The SA11x0 peripheral targeted by this request * @device_id: An ascii name for the claiming device * @callback: Function to be called when the DMA completes diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 446f86763816..0c7802bbeccb 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -112,7 +112,7 @@ enum iomux_gp_func { * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); /* diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 9f13061192c8..3887f3fe29d4 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -48,7 +48,7 @@ * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label); /* diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 5cdbd605ac05..4ff6dfe04283 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) * register to follow the ratio of duty_ns vs. period_ns * accordingly. * - * This is good enought for programming the brightness of + * This is good enough for programming the brightness of * the LCD backlight. * * The real implementation would divide PERCLK[0] first by diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b53125f41293..0e308913291b 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1232,7 +1232,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue) * OMAP_DMA_DYNAMIC_CHAIN * @params - Channel parameters * - * @return - Succes : 0 + * @return - Success : 0 * Failure: -EINVAL/-ENOMEM */ int omap_request_dma_chain(int dev_id, const char *dev_name, diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h index 0e69b504c25f..7560b4d583a3 100644 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ b/arch/arm/plat-omap/include/mach/omap16xx.h @@ -124,7 +124,7 @@ #define TIPB_SWITCH_BASE (0xfffbc800) #define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) -/* UART3 Registers Maping through MPU bus */ +/* UART3 Registers Mapping through MPU bus */ #define UART3_RHR (OMAP_UART3_BASE + 0) #define UART3_THR (OMAP_UART3_BASE + 0) #define UART3_DLL (OMAP_UART3_BASE + 0) diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index c4d133436fc7..bd534d32b993 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -64,7 +64,7 @@ /* the calculation for the VA of this must ensure that * it is the same distance apart from the UART in the * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at + * is done as a 1:1 mapping. This puts it (currently) at * 0xFA800000, which is not in the way of any current mapping * by the base system. */ diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig index fda2331f9789..5c13d785cc70 100644 --- a/arch/avr32/boards/hammerhead/Kconfig +++ b/arch/avr32/boards/hammerhead/Kconfig @@ -24,7 +24,7 @@ config BOARD_HAMMERHEAD_SND bool "Atmel AC97 Sound support" help This enables Sound support for the Hammerhead board. You may - also go trough the ALSA settings to get it working. + also go through the ALSA settings to get it working. Choose 'Y' here if you have ordered a Corona daugther board and want to make your board funky. diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 6b7325d634af..78cb3d38f899 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) /* * Similar to get_user, do some address checking, then dereference - * Return true on sucess, false on bad address + * Return true on success, false on bad address */ static bool get_instruction(unsigned short *val, unsigned short *address) { diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index e06f4112c695..f9fd2b2a2956 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -542,7 +542,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -550,7 +550,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index f821700716ee..b9dbb73d7ef0 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -544,7 +544,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -552,7 +552,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index cebb14feb1ba..a6d20ca57683 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -934,7 +934,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -942,7 +942,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index dd414ae4ba4c..39f588dcd382 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -491,7 +491,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -501,7 +501,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 5a9dbabe0a68..c4dcf302d9f5 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -470,7 +470,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -480,7 +480,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h index 82cd593f7391..a5079980968c 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -853,7 +853,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -863,7 +863,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h index 6fc6e39ab61b..f7f043560c6f 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -1024,7 +1024,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -1034,7 +1034,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 4a7cdd9ea1ee..380df1a73a6e 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -209,7 +209,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, /* Are we prepared to handle this kernel fault? * * (The kernel has valid exception-points in the source - * when it acesses user-memory. When it fails in one + * when it accesses user-memory. When it fails in one * of those points, we find it in a table and do a jump * to some fixup code that loads an appropriate error * code) diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 674a8374c6d9..f332e3fe4237 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1381,7 +1381,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, #endif /* - ** Not virtually contigous. + ** Not virtually contiguous. ** Terminate prev chunk. ** Start a new chunk. ** diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index af9405cd70e5..02d1fb732951 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -79,7 +79,7 @@ GLOBAL_ENTRY(ia32_ret_from_clone) (p6) br.cond.spnt .ia32_strace_check_retval ;; // prevent RAW on r8 END(ia32_ret_from_clone) - // fall thrugh + // fall through GLOBAL_ENTRY(ia32_ret_from_syscall) PT_REGS_UNWIND_INFO(0) diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h index 48822c0811d8..74724b24c2b7 100644 --- a/arch/ia64/include/asm/perfmon_default_smpl.h +++ b/arch/ia64/include/asm/perfmon_default_smpl.h @@ -67,7 +67,7 @@ typedef struct { unsigned long ip; /* where did the overflow interrupt happened */ unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */ - unsigned short cpu; /* cpu on which the overfow occured */ + unsigned short cpu; /* cpu on which the overflow occured */ unsigned short set; /* event set active when overflow ocurred */ int tgid; /* thread group id (for NPTL, this is getpid()) */ } pfm_default_smpl_entry_t; diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h index 22a6f18a5313..6052422a22b3 100644 --- a/arch/ia64/include/asm/sn/shubio.h +++ b/arch/ia64/include/asm/sn/shubio.h @@ -3289,7 +3289,7 @@ typedef ii_icrb0_e_u_t icrbe_t; #define IIO_IIDSR_LVL_SHIFT 0 #define IIO_IIDSR_LVL_MASK 0x000000ff -/* Xtalk timeout threshhold register (IIO_IXTT) */ +/* Xtalk timeout threshold register (IIO_IXTT) */ #define IXTT_RRSP_TO_SHFT 55 /* read response timeout */ #define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT) #define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */ diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c index d5764a3d74af..b091111270cb 100644 --- a/arch/ia64/kernel/esi.c +++ b/arch/ia64/kernel/esi.c @@ -84,7 +84,7 @@ static int __init esi_init (void) case ESI_DESC_ENTRY_POINT: break; default: - printk(KERN_WARNING "Unkown table type %d found in " + printk(KERN_WARNING "Unknown table type %d found in " "ESI table, ignoring rest of table\n", *p); return -ENODEV; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f1782705b1f7..b3a1cb3e6b25 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -3523,7 +3523,7 @@ pfm_use_debug_registers(struct task_struct *task) * IA64_THREAD_DBG_VALID set. This indicates a task which was * able to use the debug registers for debugging purposes via * ptrace(). Therefore we know it was not using them for - * perfmormance monitoring, so we only decrement the number + * performance monitoring, so we only decrement the number * of "ptraced" debug register users to keep the count up to date */ int diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 6c1a9a217887..73613b5f1ee5 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -753,7 +753,7 @@ fovfl_ovfl_on: bra.l _real_ovfl -# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). fovfl_inex_on: @@ -1015,7 +1015,7 @@ funfl_unfl_on2: bra.l _real_unfl -# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). funfl_inex_on: @@ -2963,7 +2963,7 @@ iea_disabled: tst.w %d0 # is instr fmovm? bmi.b iea_dis_fmovm # yes -# instruction is using an extended precision immediate operand. therefore, +# instruction is using an extended precision immediate operand. Therefore, # the total instruction length is 16 bytes. iea_dis_immed: mov.l &0x10,%d0 # 16 bytes of instruction @@ -9624,7 +9624,7 @@ sok_dnrm: bge.b sok_norm2 # thank goodness no # the multiply factor that we're trying to create should be a denorm -# for the multiply to work. therefore, we're going to actually do a +# for the multiply to work. Therefore, we're going to actually do a # multiply with a denorm which will cause an unimplemented data type # exception to be put into the machine which will be caught and corrected # later. we don't do this with the DENORMs above because this method @@ -12216,7 +12216,7 @@ fin_sd_unfl_dis: # # operand will underflow AND underflow or inexact is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fin_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -12746,7 +12746,7 @@ fdiv_zero_load_p: # # The destination was In Range and the source was a ZERO. The result, -# therefore, is an INF w/ the proper sign. +# Therefore, is an INF w/ the proper sign. # So, determine the sign and return a new INF (w/ the j-bit cleared). # global fdiv_inf_load # global for fsgldiv @@ -12996,7 +12996,7 @@ fneg_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fneg_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -13611,7 +13611,7 @@ fabs_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fabs_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -14973,7 +14973,7 @@ fadd_zero_2: # # the ZEROes have opposite signs: -# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. +# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. # - -ZERO is returned in the case of RM. # fadd_zero_2_chk_rm: @@ -15425,7 +15425,7 @@ fsub_zero_2: # # the ZEROes have the same signs: -# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP +# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP # - -ZERO is returned in the case of RM. # fsub_zero_2_chk_rm: @@ -15693,7 +15693,7 @@ fsqrt_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fsqrt_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -21000,7 +21000,7 @@ fout_pack_type: tst.l %d0 bne.b fout_pack_set # "mantissa" is all zero which means that the answer is zero. but, the '040 -# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore, +# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore, # if the mantissa is zero, I will zero the exponent, too. # the question now is whether the exponents sign bit is allowed to be non-zero # for a zero, also... @@ -21743,7 +21743,7 @@ denorm_set_stky: rts # # -# dnrm_lp(): normalize exponent/mantissa to specified threshhold # +# dnrm_lp(): normalize exponent/mantissa to specified threshold # # # # INPUT: # # %a0 : points to the operand to be denormalized # @@ -22402,7 +22402,7 @@ unnorm_shift: bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0 # -# exponent would not go < 0. therefore, number stays normalized +# exponent would not go < 0. Therefore, number stays normalized # sub.w %d0, %d1 # shift exponent value mov.w FTEMP_EX(%a0), %d0 # load old exponent diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index 51b9f7d879dd..e71ba0ab013c 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -752,7 +752,7 @@ fovfl_ovfl_on: bra.l _real_ovfl -# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). fovfl_inex_on: @@ -1014,7 +1014,7 @@ funfl_unfl_on2: bra.l _real_unfl -# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). funfl_inex_on: @@ -2962,7 +2962,7 @@ iea_disabled: tst.w %d0 # is instr fmovm? bmi.b iea_dis_fmovm # yes -# instruction is using an extended precision immediate operand. therefore, +# instruction is using an extended precision immediate operand. Therefore, # the total instruction length is 16 bytes. iea_dis_immed: mov.l &0x10,%d0 # 16 bytes of instruction @@ -5865,7 +5865,7 @@ denorm_set_stky: rts # # -# dnrm_lp(): normalize exponent/mantissa to specified threshhold # +# dnrm_lp(): normalize exponent/mantissa to specified threshold # # # # INPUT: # # %a0 : points to the operand to be denormalized # @@ -6524,7 +6524,7 @@ unnorm_shift: bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0 # -# exponent would not go < 0. therefore, number stays normalized +# exponent would not go < 0. Therefore, number stays normalized # sub.w %d0, %d1 # shift exponent value mov.w FTEMP_EX(%a0), %d0 # load old exponent @@ -7901,7 +7901,7 @@ fout_pack_type: tst.l %d0 bne.b fout_pack_set # "mantissa" is all zero which means that the answer is zero. but, the '040 -# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore, +# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore, # if the mantissa is zero, I will zero the exponent, too. # the question now is whether the exponents sign bit is allowed to be non-zero # for a zero, also... @@ -8647,7 +8647,7 @@ fin_sd_unfl_dis: # # operand will underflow AND underflow or inexact is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fin_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -9177,7 +9177,7 @@ fdiv_zero_load_p: # # The destination was In Range and the source was a ZERO. The result, -# therefore, is an INF w/ the proper sign. +# Therefore, is an INF w/ the proper sign. # So, determine the sign and return a new INF (w/ the j-bit cleared). # global fdiv_inf_load # global for fsgldiv @@ -9427,7 +9427,7 @@ fneg_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fneg_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -10042,7 +10042,7 @@ fabs_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fabs_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -11404,7 +11404,7 @@ fadd_zero_2: # # the ZEROes have opposite signs: -# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. +# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. # - -ZERO is returned in the case of RM. # fadd_zero_2_chk_rm: @@ -11856,7 +11856,7 @@ fsub_zero_2: # # the ZEROes have the same signs: -# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP +# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP # - -ZERO is returned in the case of RM. # fsub_zero_2_chk_rm: @@ -12124,7 +12124,7 @@ fsqrt_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fsqrt_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h index fb8a06b9ab6a..67e7a78ad96b 100644 --- a/arch/m68k/include/asm/bootinfo.h +++ b/arch/m68k/include/asm/bootinfo.h @@ -145,7 +145,7 @@ struct bi_record { /* * Macintosh hardware profile data - unused, see macintosh.h for - * resonable type values + * reasonable type values */ #define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */ diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index 6a907c58a4bc..cc2108b6b260 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index d4e9f49a71f7..0929198c5e68 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 941dc8f94b03..4df851d41a29 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h index 8de0eb9c98a3..ed3a88da70f6 100644 --- a/arch/mips/include/asm/mach-pnx833x/gpio.h +++ b/arch/mips/include/asm/mach-pnx833x/gpio.h @@ -24,7 +24,7 @@ /* BIG FAT WARNING: races danger! No protections exist here. Current users are only early init code, - when locking is not needed because no cuncurency yet exists there, + when locking is not needed because no concurrency yet exists there, and GPIO IRQ dispatcher, which does locking. However, if many uses will ever happen, proper locking will be needed - including locking between different uses diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h index 343ed15f8dc4..57a971904cfe 100644 --- a/arch/mips/include/asm/sgi/ioc.h +++ b/arch/mips/include/asm/sgi/ioc.h @@ -164,7 +164,7 @@ struct sgioc_regs { u32 _unused5; u8 _write[3]; volatile u8 write; -#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */ +#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */ #define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ #define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h index b6faf08ca81d..591b9061fd8e 100644 --- a/arch/mips/include/asm/sibyte/sb1250_mac.h +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -212,7 +212,7 @@ #define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) /* - * MAC Fifo Threshhold registers (Table 9-14) + * MAC Fifo Threshold registers (Table 9-14) * Register: MAC_THRSH_CFG_0 * Register: MAC_THRSH_CFG_1 * Register: MAC_THRSH_CFG_2 diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h index d0c29d4de084..31c76c021bb6 100644 --- a/arch/mips/include/asm/sn/sn0/hubio.h +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -825,7 +825,7 @@ typedef union iprb_u { struct { u64 rsvd1: 15, error: 1, /* Widget rcvd wr resp pkt w/ error */ - ovflow: 5, /* Over flow count. perf measurement */ + ovflow: 5, /* Overflow count. perf measurement */ fire_and_forget: 1, /* Launch Write without response */ mode: 2, /* Widget operation Mode */ rsvd2: 2, diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 24630fd8ef60..a38e3ee95515 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1331,7 +1331,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) if (!((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); - /* Traverse all online CPUs (hack requires contigous range) */ + /* Traverse all online CPUs (hack requires contiguous range) */ for_each_online_cpu(i) { /* * We don't need to worry about our own CPU, nor those of diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c index b30c5b1f1a2c..a2127d685a0d 100644 --- a/arch/mips/math-emu/dp_sub.c +++ b/arch/mips/math-emu/dp_sub.c @@ -110,7 +110,7 @@ ieee754dp ieee754dp_sub(ieee754dp x, ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* FAAL THOROUGH */ + /* FALL THROUGH */ case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): /* normalize ym,ye */ diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c index a2b2d62d88e3..8ebc3848f3ac 100644 --- a/arch/mips/txx9/generic/smsc_fdc37m81x.c +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -117,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) if (chip_id == SMSC_FDC37M81X_CHIP_ID) smsc_fdc37m81x_config_end(); else { - printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__, + printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__, chip_id); g_smsc_fdc37m81x_base = 0; } diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h index 1e180a594589..0de404dfee8b 100644 --- a/arch/powerpc/include/asm/reg_fsl_emb.h +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -39,7 +39,7 @@ #define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ #define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ -#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ +#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */ #define PMLCB_THRESHMUL_SHIFT 8 #define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 641c74bb8e27..b6bd1eaa1c24 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -52,7 +52,7 @@ static struct hard_trap_info { 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */ { 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */ { 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */ - { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */ + { 0x2060, 0x0e /* SIGILL */ }, /* performance monitor */ { 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */ { 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */ { 0x3200, 0x02 /* SIGINT */ }, /* watchdog */ diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c index c3a56d65c5a9..a753b72efbc0 100644 --- a/arch/powerpc/kernel/tau_6xx.c +++ b/arch/powerpc/kernel/tau_6xx.c @@ -59,7 +59,7 @@ void set_thresholds(unsigned long cpu) mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID); /* setup THRM2, - * threshold, valid bit, enable interrupts, interrupt when above threshhold + * threshold, valid bit, enable interrupts, interrupt when above threshold */ mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE); #else diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 52c98edcd703..2c9e52267292 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -1594,7 +1594,7 @@ static void cell_handle_interrupt_spu(struct pt_regs *regs, * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get - * this to work as desired, the permormance monitor needs to + * this to work as desired, the performance monitor needs to * be disabled while writing to the latches. This is a * HW design issue. */ @@ -1668,7 +1668,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs, * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get - * this to work as desired, the permormance monitor needs to + * this to work as desired, the performance monitor needs to * be disabled while writing to the latches. This is a * HW design issue. */ diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index dd43114e9684..da110bd88346 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -100,7 +100,7 @@ const struct of_device_id mpc52xx_pci_ids[] __initdata = { }; /* ======================================================================== */ -/* PCI configuration acess */ +/* PCI configuration access */ /* ======================================================================== */ static int diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index e81403b245b5..ab2027cdf893 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose, * 1 -> Skip the device but act as if the access was successfull * (return 0xff's on reads, eventually, cache config space * accesses in a later version) - * -1 -> Hide the device (unsuccessful acess) + * -1 -> Hide the device (unsuccessful access) */ static int u3_ht_skip_device(struct pci_controller *hose, struct pci_bus *bus, unsigned int devfn) diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index ae3c4db86fe8..bafc3f85360d 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -160,7 +160,7 @@ static int dart_build(struct iommu_table *tbl, long index, dp = ((unsigned int*)tbl->it_base) + index; - /* On U3, all memory is contigous, so we can move this + /* On U3, all memory is contiguous, so we can move this * out of the loop. */ l = npages; diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c index 3ee78ccb617d..cd4e9c168dd7 100644 --- a/arch/s390/math-emu/math.c +++ b/arch/s390/math-emu/math.c @@ -2088,7 +2088,7 @@ int math_emu_ldr(__u8 *opcode) { __u16 opc = *((__u16 *) opcode); if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ - /* we got an exception therfore ry can't be in {0,2,4,6} */ + /* we got an exception therefore ry can't be in {0,2,4,6} */ asm volatile( /* load rx from fp_regs.fprs[ry] */ " bras 1,0f\n" " ld 0,0(%1)\n" @@ -2118,7 +2118,7 @@ int math_emu_ler(__u8 *opcode) { __u16 opc = *((__u16 *) opcode); if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ - /* we got an exception therfore ry can't be in {0,2,4,6} */ + /* we got an exception therefore ry can't be in {0,2,4,6} */ asm volatile( /* load rx from fp_regs.fprs[ry] */ " bras 1,0f\n" " le 0,0(%1)\n" diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h index 9d6684849fd9..278441f39856 100644 --- a/arch/x86/include/asm/desc_defs.h +++ b/arch/x86/include/asm/desc_defs.h @@ -12,9 +12,9 @@ #include /* - * FIXME: Acessing the desc_struct through its fields is more elegant, + * FIXME: Accessing the desc_struct through its fields is more elegant, * and should be the one valid thing to do. However, a lot of open code - * still touches the a and b acessors, and doing this allow us to do it + * still touches the a and b accessors, and doing this allow us to do it * incrementally. We keep the signature as a struct, rather than an union, * so we can get rid of it transparently in the future -- glommer */ diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index ede6998bd92c..91df7c51806c 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -47,7 +47,7 @@ static inline void resume_map_numa_kva(pgd_t *pgd) {} /* * generic node memory support, the following assumptions apply: * - * 1) memory comes in 64Mb contigious chunks which are either present or not + * 1) memory comes in 64Mb contiguous chunks which are either present or not * 2) we will not have more than 64Gb in total * * for now assume that 64Gb is max amount of RAM for whole system diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 80e2984f521c..b414d2b401f6 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -55,7 +55,7 @@ #define DESC_STATUS_SOURCE_TIMEOUT 3 /* - * source side threshholds at which message retries print a warning + * source side thresholds at which message retries print a warning */ #define SOURCE_TIMEOUT_LIMIT 20 #define DESTINATION_TIMEOUT_LIMIT 20 diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 67e929b89875..1c2c4838d35c 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1122,7 +1122,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) if (!acpi_sci_override_gsi) acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0); - /* Fill in identity legacy mapings where no override */ + /* Fill in identity legacy mappings where no override */ mp_config_acpi_legacy_irqs(); count = diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 0285521e0a99..42ac5e000995 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1637,7 +1637,7 @@ retry: goto out; /* - * aperture was sucessfully enlarged by 128 MB, try + * aperture was successfully enlarged by 128 MB, try * allocation again */ goto retry; @@ -2396,7 +2396,7 @@ int __init amd_iommu_init_passthrough(void) struct pci_dev *dev = NULL; u16 devid, devid2; - /* allocate passthroug domain */ + /* allocate passthrough domain */ pt_domain = protection_domain_alloc(); if (!pt_domain) return -ENOMEM; diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index b5801c311846..35be5802ac1e 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1229,7 +1229,7 @@ x86_perf_event_set_period(struct perf_event *event, return 0; /* - * If we are way outside a reasoable range then just skip forward: + * If we are way outside a reasonable range then just skip forward: */ if (unlikely(left <= -period)) { left = period; diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index 7b5169d2b000..7d377379fa4a 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -514,7 +514,7 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs, /* * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. + * remain disabled throughout this function. */ static int __kprobes kprobe_handler(struct pt_regs *regs) { @@ -851,7 +851,7 @@ no_change: /* * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. + * remain disabled throughout this function. */ static int __kprobes post_kprobe_handler(struct pt_regs *regs) { diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 16ccbd77917f..d16d576beebf 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -203,7 +203,7 @@ static void disarm_kmmio_fault_page(struct kmmio_fault_page *f) */ /* * Interrupts are disabled on entry as trap3 is an interrupt gate - * and they remain disabled thorough out this function. + * and they remain disabled throughout this function. */ int kmmio_handler(struct pt_regs *regs, unsigned long addr) { @@ -302,7 +302,7 @@ no_kmmio: /* * Interrupts are disabled on entry as trap1 is an interrupt gate - * and they remain disabled thorough out this function. + * and they remain disabled throughout this function. * This must always get called as the pair to kmmio_handler(). */ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) diff --git a/block/blk-iopoll.c b/block/blk-iopoll.c index ca564202ed7a..58916afbbda5 100644 --- a/block/blk-iopoll.c +++ b/block/blk-iopoll.c @@ -28,7 +28,7 @@ static DEFINE_PER_CPU(struct list_head, blk_cpu_iopoll); * Description: * Add this blk_iopoll structure to the pending poll list and trigger the * raise of the blk iopoll softirq. The driver must already have gotten a - * succesful return from blk_iopoll_sched_prep() before calling this. + * successful return from blk_iopoll_sched_prep() before calling this. **/ void blk_iopoll_sched(struct blk_iopoll *iop) { diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 9ac4e378992e..3aadded05a05 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -599,7 +599,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ - { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */ + { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unknown HP */ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d344db42a002..0d9d2f20788a 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -43,9 +43,9 @@ enum { /* * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and * chained indirect PRDEs upto a max count of 63. - * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will + * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will * be setup as an indirect descriptor, pointing to it's next - * (contigious) PRDE. Though chained indirect PRDE arrays are + * (contiguous) PRDE. Though chained indirect PRDE arrays are * supported,it will be more efficient to use a direct PRDT and * a single chain/link to indirect PRDE array/PRDT. */ @@ -314,7 +314,7 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, u32 ttl_dwords = 0; /* - * NOTE : direct & indirect prdt's are contigiously allocated + * NOTE : direct & indirect prdt's are contiguously allocated */ struct prde *prd = (struct prde *)&((struct command_desc *) cmd_desc)->prdt; diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index b2c1b37ab2e4..f734b345ac71 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -1132,7 +1132,7 @@ static int rx_pkt(struct atm_dev *dev) IF_ERR(printk(" cause: packet time out\n");) } else { - IF_ERR(printk(" cause: buffer over flow\n");) + IF_ERR(printk(" cause: buffer overflow\n");) } goto out_free_desc; } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 979d159b5cd1..ee95c76bfd3d 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -188,7 +188,7 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe); * @dev: device to try to bind to the driver * * This function returns -ENODEV if the device is not registered, - * 1 if the device is bound sucessfully and 0 otherwise. + * 1 if the device is bound successfully and 0 otherwise. * * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well. diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 5b33b85790f2..63bfc5436799 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -535,7 +535,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv) break; default: - BT_ERR("Unknow packet type:%d", type); + BT_ERR("Unknown packet type:%d", type); print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload, blksz * buf_block_len); diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 4895f0e05322..aa0919386b8c 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -214,7 +214,7 @@ static int hci_uart_send_frame(struct sk_buff *skb) struct hci_uart *hu; if (!hdev) { - BT_ERR("Frame for uknown device (hdev=NULL)"); + BT_ERR("Frame for unknown device (hdev=NULL)"); return -ENODEV; } diff --git a/drivers/char/mem.c b/drivers/char/mem.c index a074fceb67d3..42e65cf8ab52 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -5,7 +5,7 @@ * * Added devfs support. * Jan-11-1998, C. Scott Ananian - * Shared /dev/zero mmaping support, Feb 2000, Kanoj Sarcar + * Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar */ #include diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 1997270bb6f4..ecb89d798e35 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -248,7 +248,7 @@ static const struct vm_operations_struct mspec_vm_ops = { /* * mspec_mmap * - * Called when mmaping the device. Initializes the vma with a fault handler + * Called when mmapping the device. Initializes the vma with a fault handler * and private data structure necessary to allocate, track, and free the * underlying pages. */ diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 6934025a1ac1..c1d8b54c816d 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -602,7 +602,7 @@ static void receive_char(struct r3964_info *pInfo, const unsigned char c) } break; case R3964_WAIT_FOR_RX_REPEAT: - /* FALLTROUGH */ + /* FALLTHROUGH */ case R3964_IDLE: if (c == STX) { /* Prevent rx_queue from overflow: */ diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h index 20ed73f3fd7b..46e963771c30 100644 --- a/drivers/char/rio/route.h +++ b/drivers/char/rio/route.h @@ -67,7 +67,7 @@ typedef struct COST_ROUTE COST_ROUTE; struct COST_ROUTE { unsigned char cost; /* Cost down this link */ - unsigned char route[NODE_BYTES]; /* Nodes thorough this route */ + unsigned char route[NODE_BYTES]; /* Nodes through this route */ }; typedef struct ROUTE_STR ROUTE_STR; diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 5f753fc08730..09ad9154d86c 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -863,7 +863,7 @@ static int hifn_init_pubrng(struct hifn_device *dev) dev->dmareg |= HIFN_DMAIER_PUBDONE; hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); - dprintk("Chip %s: Public key engine has been sucessfully " + dprintk("Chip %s: Public key engine has been successfully " "initialised.\n", dev->name); } diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7585c4164bd5..c52ac9efd0bf 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -99,7 +99,7 @@ static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan, } /** - * atc_desc_get - get a unsused descriptor from free_list + * atc_desc_get - get an unused descriptor from free_list * @atchan: channel we want a new descriptor for */ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index fddf2b358936..d373d17257e9 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -183,7 +183,7 @@ static inline struct fw_node *fw_node(struct list_head *l) * This function builds the tree representation of the topology given * by the self IDs from the latest bus reset. During the construction * of the tree, the function checks that the self IDs are valid and - * internally consistent. On succcess this function returns the + * internally consistent. On success this function returns the * fw_node corresponding to the local card otherwise NULL. */ static struct fw_node *build_tree(struct fw_card *card, diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 5cae0b3eee9b..3f7c500b2115 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -272,7 +272,7 @@ EXPORT_SYMBOL(drm_mode_object_find); * functions & device file and adds it to the master fd list. * * RETURNS: - * Zero on success, error code on falure. + * Zero on success, error code on failure. */ int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_framebuffer_funcs *funcs) @@ -2328,7 +2328,7 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, } else if (connector->funcs->set_property) ret = connector->funcs->set_property(connector, property, out_resp->value); - /* store the property value if succesful */ + /* store the property value if successful */ if (!ret) drm_connector_property_set_value(connector, property, out_resp->value); out: diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index abfc27b0c2ea..a2a3fa599923 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1309,7 +1309,7 @@ out_free_list: * i915_gem_release_mmap - remove physical page mappings * @obj: obj in question * - * Preserve the reservation of the mmaping with the DRM core code, but + * Preserve the reservation of the mmapping with the DRM core code, but * relinquish ownership of the pages back to the system. * * It is vital that we remove the page mapping if we have mapped a tiled diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 2b0fe54cd92c..40fcf6fdef38 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -70,7 +70,7 @@ static struct drm_fb_helper_funcs intel_fb_helper_funcs = { /** - * Curretly it is assumed that the old framebuffer is reused. + * Currently it is assumed that the old framebuffer is reused. * * LOCKING * caller should hold the mode config lock. diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 083bec2e50f9..e7fa3279e2f8 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2726,7 +2726,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) /* Wrap with our custom algo which switches to DDC mode */ intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo; - /* In defaut case sdvo lvds is false */ + /* In default case sdvo lvds is false */ intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); if (intel_sdvo_output_setup(intel_output, diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 609719490ec2..00c739c44848 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -389,11 +389,11 @@ int r600_mc_init(struct radeon_device *rdev) * AGP so that GPU can catch out of VRAM/AGP access */ if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) { - /* Enought place before */ + /* Enough place before */ rdev->mc.vram_location = rdev->mc.gtt_location - rdev->mc.mc_vram_size; } else if (tmp > rdev->mc.mc_vram_size) { - /* Enought place after */ + /* Enough place after */ rdev->mc.vram_location = rdev->mc.gtt_location + rdev->mc.gtt_size; } else { diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index b38c4c8e2c61..d10eb43645c8 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -59,7 +59,7 @@ static struct fb_ops radeonfb_ops = { }; /** - * Curretly it is assumed that the old framebuffer is reused. + * Currently it is assumed that the old framebuffer is reused. * * LOCKING * caller should hold the mode config lock. diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 38537d971a3e..067167cb39ca 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -1950,7 +1950,7 @@ static void radeon_apply_surface_regs(int surf_index, * Note that refcount can be at most 2, since during a free refcount=3 * might mean we have to allocate a new surface which might not always * be available. - * For example : we allocate three contigous surfaces ABC. If B is + * For example : we allocate three contiguous surfaces ABC. If B is * freed, we suddenly need two surfaces to store A and C, which might * not always be available. */ diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 765bd184b6fc..5a664000bf70 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -372,7 +372,7 @@ static int radeon_bo_move(struct ttm_buffer_object *bo, new_mem->mem_type == TTM_PL_SYSTEM) || (old_mem->mem_type == TTM_PL_SYSTEM && new_mem->mem_type == TTM_PL_TT)) { - /* bind is enought */ + /* bind is enough */ radeon_move_null(bo, new_mem); return 0; } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 595ac638039d..9e9826ace305 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -807,11 +807,11 @@ int rv770_mc_init(struct radeon_device *rdev) * AGP so that GPU can catch out of VRAM/AGP access */ if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) { - /* Enought place before */ + /* Enough place before */ rdev->mc.vram_location = rdev->mc.gtt_location - rdev->mc.mc_vram_size; } else if (tmp > rdev->mc.mc_vram_size) { - /* Enought place after */ + /* Enough place after */ rdev->mc.vram_location = rdev->mc.gtt_location + rdev->mc.gtt_size; } else { diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index c70927ecda21..61c5572d2b91 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -427,7 +427,7 @@ static int ttm_bo_kmap_ttm(struct ttm_buffer_object *bo, /* * We need to use vmap to get the desired page protection - * or to make the buffer object look contigous. + * or to make the buffer object look contiguous. */ prot = (mem->placement & TTM_PL_FLAG_CACHED) ? PAGE_KERNEL : diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 36718150b475..e845b75ccee4 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -432,7 +432,7 @@ static int adm1029_remove(struct i2c_client *client) } /* -function that update the status of the chips (temperature for exemple) +function that update the status of the chips (temperature for example) */ static struct adm1029_data *adm1029_update_device(struct device *dev) { diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index fc36cadf36fb..c48a284b8314 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -928,7 +928,7 @@ static void lm93_update_client_common(struct lm93_data *data, data->prochot_interval = lm93_read_byte(client, LM93_REG_PROCHOT_INTERVAL); - /* Fan Boost Termperature registers */ + /* Fan Boost Temperature registers */ for (i = 0; i < 4; i++) data->boost[i] = lm93_read_byte(client, LM93_REG_BOOST(i)); diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 2cd00b5b45b4..9fd4a0d3206e 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -125,7 +125,7 @@ 0 - no debugging messages 1 - some debugging messages, but none during DMA frame transmission 2 - lots of messages, including during DMA frame transmission - (will cause undeflows if your machine is too slow!) + (will cause underflows if your machine is too slow!) */ #define DV1394_DEBUG_LEVEL 0 diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 4bd39c8af80f..37d12e5efa49 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -381,7 +381,7 @@ static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr = #define IPATH_GPIO_SCL \ (1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) -/* keep the code below somewhat more readonable; not used elsewhere */ +/* keep the code below somewhat more readable; not used elsewhere */ #define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \ infinipath_hwe_htclnkabyte1crcerr) #define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \ diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c b/drivers/infiniband/hw/ipath/ipath_sd7220.c index aa47eb549520..2a68d9f624dd 100644 --- a/drivers/infiniband/hw/ipath/ipath_sd7220.c +++ b/drivers/infiniband/hw/ipath/ipath_sd7220.c @@ -614,7 +614,7 @@ static int epb_trans(struct ipath_devdata *dd, u16 reg, u64 i_val, u64 *o_vp) * @wd: Write Data - value to set in register * @mask: ones where data should be spliced into reg. * - * Basic register read/modify/write, with un-needed acesses elided. That is, + * Basic register read/modify/write, with un-needed accesses elided. That is, * a mask of zero will prevent write, while a mask of 0xFF will prevent read. * returns current (presumed, if a write was done) contents of selected * register, or <0 if errors. @@ -989,7 +989,7 @@ static struct rxeq_init { /* Set DFELTHFDR/HDR thresholds */ RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */ RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */ - /* Set TLTHFDR/HDR theshold */ + /* Set TLTHFDR/HDR threshold */ RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */ RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */ /* Set Preamp setting 2 (ZFR/ZCNT) */ diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 219b10397b4d..256a00c6aeea 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -352,7 +352,7 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, * anymore, so we do this only if selective signaling is off. * * Further, on 32-bit platforms, we can't use vmap() to make - * the QP buffer virtually contigious. Thus we have to use + * the QP buffer virtually contiguous. Thus we have to use * constant-sized WRs to make sure a WR is always fully within * a single page-sized chunk. * diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 1c9410d1822c..bcc2d30ec245 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed); ret = hp_sdc_init(); - /* after sucessfull initialization give SDC some time to settle + /* after successfull initialization give SDC some time to settle * and then load the hp_sdc_mlc upper layer driver */ if (!ret) schedule_delayed_work(&moduleloader_work, diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c index 820e51673b26..7d2b820ef58d 100644 --- a/drivers/input/serio/hp_sdc_mlc.c +++ b/drivers/input/serio/hp_sdc_mlc.c @@ -125,7 +125,7 @@ static void hp_sdc_mlc_isr (int irq, void *dev_id, break; default: - printk(KERN_WARNING PREFIX "Unkown HIL Error status (%x)!\n", data); + printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data); break; } diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index 35377f583e28..a12242f77e23 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -59,7 +59,7 @@ #define ATMEL_WM97XX_AC97C_IRQ (29) #define ATMEL_WM97XX_GPIO_DEFAULT (32+16) /* Pin 16 on port B. */ #else -#error Unkown CPU, this driver only supports AT32AP700X CPUs. +#error Unknown CPU, this driver only supports AT32AP700X CPUs. #endif struct continuous { diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 8fc3b08deb3b..6cdcf2a6e036 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -14,7 +14,7 @@ * * Notes: * This is a wm97xx extended touch driver to capture touch - * data in a continuous manner on the Intel XScale archictecture + * data in a continuous manner on the Intel XScale architecture * * Features: * - codecs supported:- WM9705, WM9712, WM9713 @@ -131,7 +131,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low - * threashold set to use the notifications it gives. + * threshold set to use the notifications it gives. */ schedule_timeout_uninterruptible(1); diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index 41e4359c277c..eca54dbdf493 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -96,7 +96,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low - * threashold set to use the notifications it gives. + * threshold set to use the notifications it gives. */ msleep(1); diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c index 3e6d17f42a98..66b7d7a86474 100644 --- a/drivers/isdn/capi/capidrv.c +++ b/drivers/isdn/capi/capidrv.c @@ -830,7 +830,7 @@ static void handle_controller(_cmsg * cmsg) case 0: break; case 1: s = "unknown class"; break; case 2: s = "unknown function"; break; - default: s = "unkown error"; break; + default: s = "unknown error"; break; } if (s) printk(KERN_INFO "capidrv-%d: %s from controller 0x%x function %d: %s\n", diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c index b029d130eb21..cb14ae3e7154 100644 --- a/drivers/isdn/hardware/eicon/di.c +++ b/drivers/isdn/hardware/eicon/di.c @@ -806,7 +806,7 @@ static void xdi_xlog_request (byte Adapter, byte Id, DELIVERY - indication entered isdn_rc function RNR=... - application had returned RNR=... after the look ahead callback - RNum=0 - aplication had not returned any buffer to copy + RNum=0 - application had not returned any buffer to copy this indication and will copy it self COMPLETE - XDI had copied the data to the buffers provided bu the application and is about to issue the diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 23960cb6eaab..e7cfb3b5647f 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -385,7 +385,7 @@ static int SuperTraceMessageInput (void* hLib) { } break; default: - diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind (DMA mode): %02x", Ind); + diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind (DMA mode): %02x", Ind); } p += (this_ind_length+1); total_length -= (4 + this_ind_length); @@ -420,7 +420,7 @@ static int SuperTraceMessageInput (void* hLib) { } break; default: - diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind: %02x", Ind); + diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind: %02x", Ind); } } } diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index fc46a26cb14f..a64bb6c67ba7 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -721,7 +721,7 @@ hfcsusb_setup_bch(struct bchannel *bch, int protocol) switch (protocol) { case (-1): /* used for init */ bch->state = -1; - /* fall trough */ + /* fall through */ case (ISDN_P_NONE): if (bch->state == ISDN_P_NONE) return 0; /* already in idle state */ diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h index 43efe7358fa3..369196adae03 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.h +++ b/drivers/isdn/hardware/mISDN/hfcsusb.h @@ -150,7 +150,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num) for (i = 0; list[i].name != NULL; i++) if (list[i].num == num) return list[i].name; - return ""; + return ""; } /* USB descriptor need to contain one of the following EndPoint combination: */ diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c index de352a17673a..09095c747110 100644 --- a/drivers/isdn/hardware/mISDN/mISDNisar.c +++ b/drivers/isdn/hardware/mISDN/mISDNisar.c @@ -860,7 +860,7 @@ isar_pump_statev_modem(struct isar_ch *ch, u8 devt) { pr_debug("%s: pump stev GSTN CLEAR\n", ch->is->name); break; default: - pr_info("u%s: nknown pump stev %x\n", ch->is->name, devt); + pr_info("u%s: unknown pump stev %x\n", ch->is->name, devt); break; } } diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9de54202c90c..ad5831f37d84 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1086,7 +1086,7 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) break; default: DBG(HFCUSB_DBG_STATES, - "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x", pr); + "HFC_USB: hfc_usb_d_l2l1: unknown state : %#x", pr); break; } } diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 2d14b64202a3..0f4ea7d16a15 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -836,7 +836,7 @@ isdn_ppp_write(int min, struct file *file, const char __user *buf, int count) unsigned short hl; struct sk_buff *skb; /* - * we need to reserve enought space in front of + * we need to reserve enough space in front of * sk_buff. old call to dev_alloc_skb only reserved * 16 bytes, now we are looking what the driver want */ @@ -1326,7 +1326,7 @@ isdn_ppp_xmit(struct sk_buff *skb, struct net_device *netdev) struct sk_buff *new_skb; unsigned short hl; /* - * we need to reserve enought space in front of + * we need to reserve enough space in front of * sk_buff. old call to dev_alloc_skb only reserved * 16 bytes, now we are looking what the driver want. */ @@ -1685,7 +1685,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * * try to accomplish several tasks: * - reassemble any complete fragment sequence (non-null 'start' - * indicates there is a continguous sequence present) + * indicates there is a contiguous sequence present) * - discard any incomplete sequences that are below minseq -- due * to the fact that sender always increment sequence number, if there * is an incomplete sequence below minseq, no new fragments would diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c index 78f7660c1d0e..4c41f191d4e2 100644 --- a/drivers/isdn/i4l/isdn_ttyfax.c +++ b/drivers/isdn/i4l/isdn_ttyfax.c @@ -470,7 +470,7 @@ isdn_tty_cmd_FCLASS2(char **p, modem_info * info) } return 0; } - /* BADMUL=value - dummy 0=disable errorchk disabled (treshold multiplier) */ + /* BADMUL=value - dummy 0=disable errorchk disabled (threshold multiplier) */ if (!strncmp(p[0], "BADMUL", 6)) { p[0] += 6; switch (*p[0]) { diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c index 77ee2867c8b4..43ff4d3b046e 100644 --- a/drivers/isdn/mISDN/dsp_core.c +++ b/drivers/isdn/mISDN/dsp_core.c @@ -110,7 +110,7 @@ * crossconnections and conferences via software if not possible through * hardware. If hardware capability is available, hardware is used. * - * Echo: Is generated by CMX and is used to check performane of hard and + * Echo: Is generated by CMX and is used to check performance of hard and * software CMX. * * The CMX has special functions for conferences with one, two and more diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c index e04bad6c5baf..6d4da6095885 100644 --- a/drivers/isdn/mISDN/tei.c +++ b/drivers/isdn/mISDN/tei.c @@ -725,7 +725,7 @@ tei_id_ver_tout_net(struct FsmInst *fi, int event, void *arg) if (tm->rcnt == 1) { if (*debug & DEBUG_L2_TEI) tm->tei_m.printdebug(fi, - "check req for tei %d sucessful\n", tm->l2->tei); + "check req for tei %d successful\n", tm->l2->tei); mISDN_FsmChangeState(fi, ST_TEI_NOP); } else if (tm->rcnt > 1) { /* duplicate assignment; remove */ diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 8b9364434aa0..3fbe41b0ac07 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -15,7 +15,7 @@ * * WARNING: This driver has only been testen on Apple's * 1.25 MHz Dual G4 (March 03). It is tuned for a CPU - * temperatur around 57 C. + * temperature around 57 C. * * Copyright (C) 2003, 2004 Samuel Rydh (samuel@ibrium.se) * diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c index 7e8f56815998..48cb154c7a46 100644 --- a/drivers/media/common/saa7146_i2c.c +++ b/drivers/media/common/saa7146_i2c.c @@ -98,7 +98,7 @@ static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op) op_count++; - /* loop throgh all bytes of message i */ + /* loop through all bytes of message i */ for(j = 0; j < m[i].len; j++) { /* write back all bytes that could have been read */ m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8)); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 810f07d63246..52e4ce4304ee 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -160,7 +160,7 @@ struct tuner_state { * search callback possible return status * * DVBFE_ALGO_SEARCH_SUCCESS - * The frontend search algorithm completed and returned succesfully + * The frontend search algorithm completed and returned successfully * * DVBFE_ALGO_SEARCH_ASLEEP * The frontend search algorithm is sleeping diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 2ae7f648effe..bb69f3719f9a 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -344,7 +344,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) if (ret) return ret; - err("Unkown Anysee version: %02x %02x %02x. "\ + err("Unknown Anysee version: %02x %02x %02x. "\ "Please report the .", hw_info[0], hw_info[1], hw_info[2]); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index eeef50bff4f9..5c0126dc1ff9 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -242,7 +242,7 @@ static struct dvb_usb_device_properties dibusb1_1_properties = { { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, }, - { "Unkown USB1.1 DVB-T device ???? please report the name to the author", + { "Unknown USB1.1 DVB-T device ???? please report the name to the author", { &dibusb_dib3000mb_table[13], NULL }, { &dibusb_dib3000mb_table[14], NULL }, }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index edde87c6aa3a..6b5ded9e7d5d 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -259,7 +259,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, *state = REMOTE_KEY_REPEAT; break; default: - deb_err("unkown type of remote status: %d\n",keybuf[0]); + deb_err("unknown type of remote status: %d\n",keybuf[0]); break; } return 0; diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c index 9da2cc95ca13..f9702e3756b6 100644 --- a/drivers/media/dvb/dvb-usb/usb-urb.c +++ b/drivers/media/dvb/dvb-usb/usb-urb.c @@ -56,7 +56,7 @@ static void usb_urb_complete(struct urb *urb) stream->complete(stream, b, urb->actual_length); break; default: - err("unkown endpoint type in completition handler."); + err("unknown endpoint type in completition handler."); return; } usb_submit_urb(urb,GFP_ATOMIC); @@ -228,7 +228,7 @@ int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properti case USB_ISOC: return usb_isoc_urb_init(stream); default: - err("unkown URB-type for data transfer."); + err("unknown URB-type for data transfer."); return -EINVAL; } } diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c index 74981ee923c8..7c6431fe33e0 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb/frontends/au8522_decoder.c @@ -315,7 +315,7 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode) if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 || input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) { /* Despite what the table says, for the HVR-950q we still need - to be in CVBS mode for the S-Video input (reason uknown). */ + to be in CVBS mode for the S-Video input (reason unknown). */ /* filter_coef_type = 3; */ filter_coef_type = 5; } else { diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index ffbcfabd83f0..00a4e8f03304 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -1,4 +1,4 @@ - /* +/* cx24110 - Single Chip Satellite Channel Receiver driver module Copyright (C) 2002 Peter Hettkamp based on @@ -96,7 +96,7 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]= {0x42,0x00}, /* @ middle bytes " */ {0x43,0x00}, /* @ LSB " */ /* leave the carrier tracking loop parameters on default */ - /* leave the bit timing loop parameters at gefault */ + /* leave the bit timing loop parameters at default */ {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ /* the cx24108 data sheet for symbol rates above 15MS/s */ {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c index 075b2b57cf09..e9ee55592fd3 100644 --- a/drivers/media/dvb/frontends/cx24113.c +++ b/drivers/media/dvb/frontends/cx24113.c @@ -589,7 +589,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, info("detected CX24113 variant\n"); break; case REV_CX24113: - info("sucessfully detected\n"); + info("successfully detected\n"); break; default: err("unsupported device id: %x\n", state->rev); diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index 136b9d2164d7..ad4c8cfd8090 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -154,7 +154,7 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe, case BANDWIDTH_AUTO: return -EOPNOTSUPP; default: - err("unkown bandwidth value."); + err("unknown bandwidth value."); return -EINVAL; } } diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index 056387b41a8f..43971e63baa7 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -479,7 +479,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) switch (state->current_modulation) { case QAM_256: case QAM_64: - /* Need to undestand why there are 3 lock levels here */ + /* Need to understand why there are 3 lock levels here */ if ((buf[0] & 0x07) == 0x07) *status |= FE_HAS_CARRIER; break; @@ -520,7 +520,7 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) switch (state->current_modulation) { case QAM_256: case QAM_64: - /* Need to undestand why there are 3 lock levels here */ + /* Need to understand why there are 3 lock levels here */ if ((buf[0] & 0x07) == 0x07) *status |= FE_HAS_CARRIER; else diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c index a04c782fff8d..1570669837ea 100644 --- a/drivers/media/dvb/frontends/stb0899_drv.c +++ b/drivers/media/dvb/frontends/stb0899_drv.c @@ -1571,7 +1571,7 @@ static enum dvbfe_search stb0899_search(struct dvb_frontend *fe, struct dvb_fron * stb0899_track * periodically check the signal level against a specified * threshold level and perform derotator centering. - * called once we have a lock from a succesful search + * called once we have a lock from a successful search * event. * * Will be called periodically called to maintain the diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 8d65c652ba50..baf3159a3aa6 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -2425,7 +2425,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called */ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - /* set event counter 1 treshold to maximum allowed value (rEC p55) */ + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ saa7146_write(dev, ECT1R, 0x3fff ); #endif /* Set RPS1 Address register to point to RPS code (r108 p42) */ @@ -2559,7 +2559,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called */ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - /* set event counter 1 treshold to maximum allowed value (rEC p55) */ + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ saa7146_write(dev, ECT1R, 0x3fff ); #endif /* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */ diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 60136688a9a4..9c92f9ddd223 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -456,7 +456,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - // set event counter 1 treshold to maximum allowed value (rEC p55) + // set event counter 1 threshold to maximum allowed value (rEC p55) saa7146_write(dev, ECT1R, 0x3fff ); #endif // Fix VSYNC level diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index a1239083472d..5f79acb56e48 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -28,7 +28,7 @@ * http://av-usbradio.sourceforge.net/index.php * http://sourceforge.net/projects/av-usbradio/ * Latest release of theirs project was in 2005. - * Probably, this driver could be improved trough using their + * Probably, this driver could be improved through using their * achievements (specifications given). * Also, Faidon Liambotis wrote nice driver for this radio * in 2007. He allowed to use his driver to improve current mr800 radio driver. diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index 28f48f41f218..c2174413ab29 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -2414,9 +2414,11 @@ int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev) cx231xx_info("No ACK after %d msec -GPIO I2C failed!", nInit * 10); - /* readAck - throuth clock stretch ,slave has given a SCL signal, - so the SDA data can be directly read. */ + /* + * readAck + * through clock stretch, slave has given a SCL signal, + * so the SDA data can be directly read. + */ status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 45e13ee66dc7..16c6a921f40b 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -940,7 +940,7 @@ int cx23885_dvb_register(struct cx23885_tsport *port) int err, i; /* Here we need to allocate the correct number of frontends, - * as reflected in the cards struct. The reality is that currrently + * as reflected in the cards struct. The reality is that currently * no cx23885 boards support this - yet. But, if we don't modify this * code then the second frontend would never be allocated (later) * and fail with error before the attach in dvb_register(). diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index cf634606ba9a..b35411160f04 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -624,7 +624,7 @@ int cx88_reset(struct cx88_core *core) /* setup image format */ cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000); - /* setup FIFO Threshholds */ + /* setup FIFO Thresholds */ cx_write(MO_PDMA_STHRSH, 0x0807); cx_write(MO_PDMA_DTHRSH, 0x0807); diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c index 56fbefe036ae..314390016370 100644 --- a/drivers/media/video/davinci/dm355_ccdc.c +++ b/drivers/media/video/davinci/dm355_ccdc.c @@ -285,7 +285,7 @@ static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) if ((ccdcparam->med_filt_thres < 0) || (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { - dev_dbg(dev, "Invalid value of median filter thresold\n"); + dev_dbg(dev, "Invalid value of median filter threshold\n"); return -EINVAL; } diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c index 6d709ca8cfb0..453236bd7559 100644 --- a/drivers/media/video/davinci/vpss.c +++ b/drivers/media/video/davinci/vpss.c @@ -53,7 +53,7 @@ struct vpss_hw_ops { int (*enable_clock)(enum vpss_clock_sel clock_sel, int en); /* select input to ccdc */ void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel); - /* clear wbl overlflow bit */ + /* clear wbl overflow bit */ int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel); }; diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index cf3af8de6e97..e39efb45fa1c 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -304,7 +304,7 @@ static const __u8 initOv6650[] = { }; static const __u8 ov6650_sensor_init[][8] = { - /* Bright, contrast, etc are set througth SCBB interface. + /* Bright, contrast, etc are set through SCBB interface. * AVCAP on win2 do not send any data on this controls. */ /* Anyway, some registers appears to alter bright and constrat */ diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index fab7ef85a6c1..7dbd5eea6cc0 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -589,7 +589,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev) int err; __u8 Data; - /* some unknow command from Aiptek pocket dv and family300 */ + /* some unknown command from Aiptek pocket dv and family300 */ reg_w(gspca_dev, 0x00, 0x0d01, 0x01); reg_w(gspca_dev, 0x00, 0x0d03, 0x00); diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index b74a34218da0..66f9f0056146 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -1636,7 +1636,7 @@ static const __u16 spca501c_arowana_init_data[][3] = { {} }; -/* Unknow camera from Ori Usbid 0x0000:0x0000 */ +/* Unknown camera from Ori Usbid 0x0000:0x0000 */ /* Based on snoops from Ori Cohen */ static const __u16 spca501c_mysterious_open_data[][3] = { {0x02, 0x000f, 0x0005}, @@ -1945,7 +1945,7 @@ static int sd_init(struct gspca_dev *gspca_dev) goto error; break; case MystFromOriUnknownCamera: - /* UnKnow Ori CMOS Camera data */ + /* Unknown Ori CMOS Camera data */ if (write_vector(gspca_dev, spca501c_mysterious_open_data)) goto error; break; @@ -1978,7 +1978,7 @@ static int sd_start(struct gspca_dev *gspca_dev) write_vector(gspca_dev, spca501c_arowana_open_data); break; case MystFromOriUnknownCamera: - /* UnKnow CMOS Camera data */ + /* Unknown CMOS Camera data */ write_vector(gspca_dev, spca501c_mysterious_init_data); break; default: diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index aa8f995ce04e..1a9af2ebdbef 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -631,7 +631,7 @@ static void spca504A_acknowledged_command(struct gspca_dev *gspca_dev, count = 200; while (--count > 0) { msleep(10); - /* gsmart mini2 write a each wait setting 1 ms is enought */ + /* gsmart mini2 write a each wait setting 1 ms is enough */ /* reg_w_riv(dev, req, idx, val); */ status = reg_r_12(gspca_dev, 0x01, 0x0001, 1); if (status == endcode) { diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index cdf3357b4c9f..49c3c1226e0e 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7065,7 +7065,7 @@ static int sd_config(struct gspca_dev *gspca_dev, break; default: PDEBUG(D_PROBE, - "Sensor UNKNOW_0 force Tas5130"); + "Sensor UNKNOWN_0 force Tas5130"); sd->sensor = SENSOR_TAS5130CXX; } break; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 5b152ff20bd0..5fcad28211d2 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -332,7 +332,7 @@ struct pvr2_hdw { /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */ unsigned int input_avail_mask; - /* Bit mask of PVR2_CVAL_INPUT choices which are currenly allowed */ + /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */ unsigned int input_allowed_mask; /* Location of eeprom or a negative number if none */ diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 9e3262c0ba37..a4c84368eb10 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -1985,7 +1985,7 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) wake_up(&dev->fw_data->wait_fw); break; default: - printk(KERN_INFO "s2255 unknwn resp\n"); + printk(KERN_INFO "s2255 unknown resp\n"); } default: pdata++; diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index d439c76b27e1..cb1de7ea197a 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -106,7 +106,7 @@ struct zoran_params { unsigned long jpeg_markers; /* Which markers should go into the JPEG output. * Unless you exactly know what you do, leave them untouched. * Inluding less markers will make the resulting code - * smaller, but there will be fewer aplications + * smaller, but there will be fewer applications * which can read it. * The presence of the APP and COM marker is * influenced by APP0_len and COM_len ONLY! */ diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index d505b68cd372..e39986a78273 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -940,7 +940,7 @@ static const struct block_device_operations i2o_block_fops = { * Allocate memory for the i2o_block_device struct, gendisk and request * queue and initialize them as far as no additional information is needed. * - * Returns a pointer to the allocated I2O Block device on succes or a + * Returns a pointer to the allocated I2O Block device on success or a * negative error code on failure. */ static struct i2o_block_device *i2o_block_device_alloc(void) diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 27cf4af0e13d..e5ab62141503 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -132,7 +132,7 @@ u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr) * Removes a previously added pointer from the context list and returns * the matching context id. * - * Returns context id on succes or 0 on failure. + * Returns context id on success or 0 on failure. */ u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr) { @@ -198,7 +198,7 @@ void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context) * @c: controller to which the context list belong * @ptr: pointer to which the context id should be fetched * - * Returns context id which matches to the pointer on succes or 0 on + * Returns context id which matches to the pointer on success or 0 on * failure. */ u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr) diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 41c8fe2a928c..ce5eda985ab0 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -92,7 +92,7 @@ static void gru_vma_close(struct vm_area_struct *vma) /* * gru_file_mmap * - * Called when mmaping the device. Initializes the vma with a fault handler + * Called when mmapping the device. Initializes the vma with a fault handler * and private data structure necessary to allocate, track, and free the * underlying pages. */ diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 99b74a351020..941a4d35ef8d 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1360,7 +1360,7 @@ static struct mmc_host_ops s3cmci_ops = { static struct s3c24xx_mci_pdata s3cmci_def_pdata = { /* This is currently here to avoid a number of if (host->pdata) - * checks. Any zero fields to ensure reaonable defaults are picked. */ + * checks. Any zero fields to ensure reasonable defaults are picked. */ }; #ifdef CONFIG_CPU_FREQ diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 3aa05cd18ea1..592016a0668f 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -18,7 +18,7 @@ to specify the offset instead of the absolute address NOTE: - With slram it's only possible to map a contigous memory region. Therfore + With slram it's only possible to map a contiguous memory region. Therefore if there's a device mapped somewhere in the region specified slram will fail to load (see kernel log if modprobe fails). diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index e51c1ed7ac18..b126cf887476 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = { }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. - On sucessful return, buf will contain a copy of the media header for + On successful return, buf will contain a copy of the media header for further processing. id is the string to scan for, and will presumably be either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media header. The page #s of the found media headers are placed in mh0_page and diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index db7ae9d6a296..92320a643275 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -475,7 +475,7 @@ int __nand_correct_data(unsigned char *buf, * * The b2 shift is there to get rid of the lowest two bits. * We could also do addressbits[b2] >> 1 but for the - * performace it does not make any difference + * performance it does not make any difference */ if (eccsize_mult == 1) byte_addr = (addressbits[b1] << 4) + addressbits[b0]; diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 11dc7e69c4fb..68b5b3a486a9 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * @info: The controller instance. * @nmtd: The driver version of the MTD instance. * - * This routine is called after the chip probe has succesfully completed + * This routine is called after the chip probe has successfully completed * and the relevant per-chip information updated. This call ensure that * we update the internal state accordingly. * diff --git a/drivers/net/82596.c b/drivers/net/82596.c index ea6b139b812c..1663bc9e45de 100644 --- a/drivers/net/82596.c +++ b/drivers/net/82596.c @@ -19,7 +19,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index 4e6359fff0e1..766aabfdfc75 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1633,8 +1633,13 @@ static int amd8111e_enable_link_change(struct amd8111e_priv* lp) readl(lp->mmio + CMD7); return 0; } -/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */ +/* + * This function is called when a packet transmission fails to complete + * within a reasonable period, on the assumption that an interrupt have + * failed or the interface is locked up. This function will reinitialize + * the hardware. + */ static void amd8111e_tx_timeout(struct net_device *dev) { struct amd8111e_priv* lp = netdev_priv(dev); diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index b5dc7f550725..9d828aed968a 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -120,7 +120,7 @@ static int irq = 5; /* Default IRQ */ * DAYNA driver mode: * Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95, * Farallon PhoneNET PC III, Farallon PhoneNET PC II - * Other cards possibly supported mode unkown though: + * Other cards possibly supported mode unknown though: * Dayna DL2000 (Full length), COPS LT/M (Micro-Channel) * * Cards NOT supported by this driver but supported by the ltpc.c diff --git a/drivers/net/ariadne.h b/drivers/net/ariadne.h index bb613f292e04..727be5cdd1ea 100644 --- a/drivers/net/ariadne.h +++ b/drivers/net/ariadne.h @@ -244,7 +244,7 @@ struct Am79C960 { #define DLNKTST 0x0010 /* Disable Link Status */ #define DAPC 0x0008 /* Disable Automatic Polarity Correction */ #define MENDECL 0x0004 /* MENDEC Loopback Mode */ -#define LRTTSEL 0x0002 /* Low Receive Treshold/Transmit Mode Select */ +#define LRTTSEL 0x0002 /* Low Receive Threshold/Transmit Mode Select */ #define PORTSEL1 0x0001 /* Port Select Bits */ #define PORTSEL2 0x8000 /* Port Select Bits */ #define INTL 0x4000 /* Internal Loopback */ diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index 1372e9a99f5b..96506eacc131 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -1543,7 +1543,7 @@ static irqreturn_t atl1c_intr(int irq, void *data) if (status & ISR_OVER) if (netif_msg_intr(adapter)) dev_warn(&pdev->dev, - "TX/RX over flow (status = 0x%x)\n", + "TX/RX overflow (status = 0x%x)\n", status & ISR_OVER); /* link event */ diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 49953787e41c..f0bb62b5ca9e 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -435,7 +435,7 @@ enum be_if_flags { * filtering capabilities. */ struct be_cmd_req_if_create { struct be_cmd_req_hdr hdr; - u32 version; /* ignore currntly */ + u32 version; /* ignore currently */ u32 capability_flags; u32 enable_flags; u8 mac_addr[ETH_ALEN]; diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 1f941f027718..02a0908707ed 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1876,7 +1876,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func) goto fw_exit; } - dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n"); + dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n"); fw_exit: release_firmware(fw); diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index aa76cbada5e2..732eafdeb0f2 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -2536,7 +2536,7 @@ /* [RC 1] A flag to indicate that overflow error occurred in one of the queues. */ #define QM_REG_OVFERROR 0x16805c -/* [RC 7] the Q were the qverflow occurs */ +/* [RC 7] the Q where the overflow occurs */ #define QM_REG_OVFQNUM 0x168058 /* [R 16] Pause state for physical queues 15-0 */ #define QM_REG_PAUSESTATE0 0x168410 diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index f86612857a73..56ba872be9c1 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -1285,7 +1285,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) /* * We do not use Tx completion interrupts to free DMAd Tx packets. - * This is good for performamce but means that we rely on new Tx + * This is good for performance but means that we rely on new Tx * packets arriving to run the destructors of completed packets, * which open up space in their sockets' send queues. Sometimes * we do not get such new packets causing Tx to stall. A single diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c index d76885223366..75b099ce49c9 100644 --- a/drivers/net/ehea/ehea_ethtool.c +++ b/drivers/net/ehea/ehea_ethtool.c @@ -118,7 +118,7 @@ doit: ret = ehea_set_portspeed(port, sp); if (!ret) - ehea_info("%s: Port speed succesfully set: %dMbps " + ehea_info("%s: Port speed successfully set: %dMbps " "%s Duplex", port->netdev->name, port->port_speed, port->full_duplex == 1 ? "Full" : "Half"); @@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev) ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG); if (!ret) - ehea_info("%s: Port speed succesfully set: %dMbps " + ehea_info("%s: Port speed successfully set: %dMbps " "%s Duplex", port->netdev->name, port->port_speed, port->full_duplex == 1 ? "Full" : "Half"); diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index ed60fd664273..0cab992b3d1a 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -35,7 +35,7 @@ * driver only supports standard serial hardware (8250, 16450, 16550A) * * This modem usually draws its supply current out of the otherwise unused - * TXD pin of the serial port. Thus a contignuous stream of 0x00-bytes + * TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes * is transmitted to achieve a positive supply voltage. * * hsk: This is a 4800 baud FSK modem, designed for TNC use. It works fine diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index aa7286bc4364..8739ba850f82 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1384,7 +1384,7 @@ static inline void veth_build_dma_list(struct dma_chunk *list, unsigned long done; int i = 1; - /* FIXME: skbs are continguous in real addresses. Do we + /* FIXME: skbs are contiguous in real addresses. Do we * really need to break it into PAGE_SIZE chunks, or can we do * it just at the granularity of iSeries real->absolute * mapping? Indeed, given the way the allocator works, can we diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index a0c578585a50..b77238dbafb8 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c index 51e11c3e53e1..c0dbfc185b53 100644 --- a/drivers/net/lib82596.c +++ b/drivers/net/lib82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 03b781a7a182..829b9ec9ff67 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -204,7 +204,7 @@ static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv, en_dbg(DRV, priv, "Freeing fragment:%d\n", nr); dma = be64_to_cpu(rx_desc->data[nr].addr); - en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma); + en_dbg(DRV, priv, "Unmapping buffer at dma:0x%llx\n", (u64) dma); pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size, PCI_DMA_FROMDEVICE); put_page(skb_frags[nr].page); diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 8c7279965b44..3d1396af9462 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -47,7 +47,7 @@ enum { static int inline_thold __read_mostly = MAX_INLINE; module_param_named(inline_thold, inline_thold, int, 0444); -MODULE_PARM_DESC(inline_thold, "treshold for using inline data"); +MODULE_PARM_DESC(inline_thold, "threshold for using inline data"); int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring, u32 size, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 4376147b0ea0..82c3ebc584e3 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -162,7 +162,7 @@ enum { #define MLX4_EN_DEF_RX_PAUSE 1 #define MLX4_EN_DEF_TX_PAUSE 1 -/* Interval between sucessive polls in the Tx routine when polling is used +/* Interval between successive polls in the Tx routine when polling is used instead of interrupts (in per-core Tx rings) - should be power of 2 */ #define MLX4_EN_TX_POLL_MODER 16 #define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4) diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index b211613e9dbd..86fde1a90a5a 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -296,7 +296,7 @@ static void gelic_card_reset_chain(struct gelic_card *card, * @card: card structure * @descr: descriptor to re-init * - * return 0 on succes, <0 on failure + * return 0 on success, <0 on failure * * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. * Activate the descriptor state-wise diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index c072f7f36acf..9d94a141555c 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1760,7 +1760,7 @@ static int sis900_rx(struct net_device *net_dev) sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - /* refill the Rx buffer, what if there is not enought + /* refill the Rx buffer, what if there is not enough * memory for new socket buffer ?? */ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { /* @@ -1775,7 +1775,7 @@ static int sis900_rx(struct net_device *net_dev) } /* This situation should never happen, but due to - some unknow bugs, it is possible that + some unknown bugs, it is possible that we are working on NULL sk_buff :-( */ if (sis_priv->rx_skbuff[entry] == NULL) { if (netif_msg_rx_err(sis_priv)) diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h index 1758d9548361..026a83b9f743 100644 --- a/drivers/net/skfp/h/smc.h +++ b/drivers/net/skfp/h/smc.h @@ -393,10 +393,10 @@ struct smt_config { */ u_long mac_d_max ; /* MAC : D_Max timer value */ - u_long lct_short ; /* LCT : error threshhold */ - u_long lct_medium ; /* LCT : error threshhold */ - u_long lct_long ; /* LCT : error threshhold */ - u_long lct_extended ; /* LCT : error threshhold */ + u_long lct_short ; /* LCT : error threshold */ + u_long lct_medium ; /* LCT : error threshold */ + u_long lct_long ; /* LCT : error threshold */ + u_long lct_extended ; /* LCT : error threshold */ } ; #ifdef DEBUG diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index b27156eaf267..db216a728503 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1002,7 +1002,7 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } break; default: - printk("ioctl for %s: unknow cmd: %04x\n", dev->name, ioc.cmd); + printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd); status = -EOPNOTSUPP; } // switch diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index ccdd196f5297..4a00940d0a54 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev) SMSC_TRACE(HW, "Passed Loop Back Test"); #endif /* USE_PHY_WORK_AROUND */ - SMSC_TRACE(HW, "phy initialised succesfully"); + SMSC_TRACE(HW, "phy initialised successfully"); return 0; } diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h index b5716bd8a597..016360c65ce2 100644 --- a/drivers/net/smsc911x.h +++ b/drivers/net/smsc911x.h @@ -30,7 +30,7 @@ #define SMSC_NAPI_WEIGHT 16 /* implements a PHY loopback test at initialisation time, to ensure a packet - * can be succesfully looped back */ + * can be successfully looped back */ #define USE_PHY_WORK_AROUND #define DPRINTK(nlevel, klevel, fmt, args...) \ diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 90e663f4515c..40b51e6bc77b 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -409,7 +409,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card) * @card: card structure * @descr: descriptor to re-init * - * Return 0 on succes, <0 on failure. + * Return 0 on success, <0 on failure. * * Allocates a new rx skb, iommu-maps it and attaches it to the * descriptor. Mark the descriptor as activated, ready-to-use. diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c index b624bb5bae0a..52586ee68953 100644 --- a/drivers/net/stmmac/gmac.c +++ b/drivers/net/stmmac/gmac.c @@ -112,7 +112,7 @@ static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode, " (threshold = %d)\n", txmode); csr6 &= ~DMA_CONTROL_TSF; csr6 &= DMA_CONTROL_TC_TX_MASK; - /* Set the transmit threashold */ + /* Set the transmit threshold */ if (txmode <= 32) csr6 |= DMA_CONTROL_TTC_32; else if (txmode <= 64) diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h index 684a363120a9..2e82d6c9a148 100644 --- a/drivers/net/stmmac/gmac.h +++ b/drivers/net/stmmac/gmac.h @@ -154,14 +154,14 @@ enum rx_tx_priority_ratio { #define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ #define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ #define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ -/* Theshold for Activating the FC */ +/* Threshold for Activating the FC */ enum rfa { act_full_minus_1 = 0x00800000, act_full_minus_2 = 0x00800200, act_full_minus_3 = 0x00800400, act_full_minus_4 = 0x00800600, }; -/* Theshold for Deactivating the FC */ +/* Threshold for Deactivating the FC */ enum rfd { deac_full_minus_1 = 0x00400000, deac_full_minus_2 = 0x00400800, diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index ebda61bc4c2f..78e12b5e3ac7 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -426,7 +426,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev) smctr_malloc(dev, 1L); /* Allocate Non-MAC receive data buffers. - * To guarantee a minimum of 256 contigous memory to + * To guarantee a minimum of 256 contiguous memory to * UM_Receive_Packet's lookahead pointer, before a page * change or ring end is encountered, place each rx buffer on * a 256 byte boundary. diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 4469f2451a6f..5e9adbaf6745 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3798,7 +3798,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma prop = of_get_property(np, "tx-clock", NULL); if (!prop) { printk(KERN_ERR - "ucc_geth: mising tx-clock-name property\n"); + "ucc_geth: missing tx-clock-name property\n"); return -EINVAL; } if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) { diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 03a6ca016d5a..a007e2acf651 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -80,16 +80,16 @@ struct ucc_geth { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in succesfull + that where involved in successfull transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ u8 res4[0x2]; u32 tmca; /* Total number of frames that were transmitted - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ u32 tbca; /* Total number of frames transmitted - succesfully that had destination address + successfully that had destination address field equal to the broadcast address */ u32 rxfok; /* Total number of frames received OK */ u32 rxbok; /* Total number of octets received OK */ @@ -98,9 +98,9 @@ struct ucc_geth { HW because it includes octets in frames that never even reach the UCC */ u32 rmca; /* Total number of frames that were received - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ - u32 rbca; /* Total number of frames received succesfully + u32 rbca; /* Total number of frames received successfully that had destination address equal to the broadcast address */ u32 scar; /* Statistics carry register */ @@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in succesfull + that where involved in successfull transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ u32 tmca; /* Total number of frames that were transmitted - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ u32 tbca; /* Total number of frames transmitted - succesfully that had destination address + successfully that had destination address field equal to the broadcast address */ u32 rxfok; /* Total number of frames received OK */ u32 rxbok; /* Total number of octets received OK */ @@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics { HW because it includes octets in frames that never even reach the UCC */ u32 rmca; /* Total number of frames that were received - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ - u32 rbca; /* Total number of frames received succesfully + u32 rbca; /* Total number of frames received successfully that had destination address equal to the broadcast address */ } __attribute__ ((packed)); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index c6c922247d05..0c3c738d7419 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -748,7 +748,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev) mii_nway_restart(&dev->mii); if (netif_msg_ifup(dev)) - devdbg(dev, "phy initialised succesfully"); + devdbg(dev, "phy initialised successfully"); return 0; } diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 7ea71b33d2e9..ee784e091f67 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -927,7 +927,7 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, sc->lmc_media = &lmc_t1_media; break; default: - printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); + printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name); break; } diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 07c32e68909f..99d27473ba3f 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -1114,7 +1114,7 @@ error: * device. See the file header for the format. Run all checks on the * buffer header, then run over each payload's descriptors, verify * their consistency and act on each payload's contents. If - * everything is succesful, update the device's statistics. + * everything is successful, update the device's statistics. * * Note: You need to set the skb to contain only the length of the * received buffer; for that, use skb_trim(skb, RECEIVED_SIZE). diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 1a039f2bd732..6f04cc758dcc 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -117,7 +117,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, /* * This code is used to optimize rf gain on different environments - * (temprature mostly) based on feedback from a power detector. + * (temperature mostly) based on feedback from a power detector. * * It's only used on RF5111 and RF5112, later RF chips seem to have * auto adjustment on hw -notice they have a much smaller BANK 7 and @@ -2675,7 +2675,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Fill curves in reverse order * from lower power (max gain) * to higher power. Use curve -> idx - * backmaping we did on eeprom init */ + * backmapping we did on eeprom init */ u8 idx = pdg_curve_to_idx[pdg]; /* Grab the needed curves by index */ @@ -2777,7 +2777,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Now we have a set of curves for this * channel on tmpL (x range is table_max - table_min * and y values are tmpL[pdg][]) sorted in the same - * order as EEPROM (because we've used the backmaping). + * order as EEPROM (because we've used the backmapping). * So for RF5112 it's from higher power to lower power * and for RF2413 it's from lower power to higher power. * For RF5111 we only have one curve. */ diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 1895d63aad0a..0a35ee62a02a 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -969,7 +969,7 @@ static bool ath_rc_update_per(struct ath_softc *sc, * Since this probe succeeded, we allow the next * probe twice as soon. This allows the maxRate * to move up faster if the probes are - * succesful. + * successful. */ ath_rc_priv->probe_time = now_msec - rate_table->probe_interval / 2; diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index a741d37fd96f..e1b330023200 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -551,7 +551,7 @@ static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, /* get number of entries */ field_count = *(((u16 *) & field_info) + 1); - /* abort if no enought memory */ + /* abort if no enough memory */ total_length = field_len * field_count; if (total_length > *len) { *len = total_length; @@ -3044,7 +3044,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) IPW_MAX_BDS)) { /* TODO: Support merging buffers if more than * IPW_MAX_BDS are used */ - IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. " + IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. " "Increase fragmentation level.\n", priv->net_dev->name); } @@ -6823,7 +6823,7 @@ static int ipw2100_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 9b0f2c0646e0..b2aa960b8346 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -787,7 +787,7 @@ static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val, u32 * len) /* get number of entries */ field_count = *(((u16 *) & field_info) + 1); - /* abort if not enought memory */ + /* abort if not enough memory */ total_len = field_len * field_count; if (total_len > *len) { *len = total_len; @@ -7751,7 +7751,7 @@ static void ipw_rebuild_decrypted_skb(struct ipw_priv *priv, case SEC_LEVEL_0: break; default: - printk(KERN_ERR "Unknow security level %d\n", + printk(KERN_ERR "Unknown security level %d\n", priv->ieee->sec.level); break; } @@ -8917,7 +8917,7 @@ static int ipw_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 70; - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 0; /* FIXME to real average level */ range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ @@ -10290,7 +10290,7 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct libipw_txb *txb, case SEC_LEVEL_0: break; default: - printk(KERN_ERR "Unknow security level %d\n", + printk(KERN_ERR "Unknown security level %d\n", priv->ieee->sec.level); break; } diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index be5b809ec97a..20b8a8a20644 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -199,7 +199,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) ieee->host_decrypt = 1; ieee->host_mc_decrypt = 1; - /* Host fragementation in Open mode. Default is enabled. + /* Host fragmentation in Open mode. Default is enabled. * Note: host fragmentation is always enabled if host encryption * is enabled. For cards can do hardware encryption, they must do * hardware fragmentation as well. So we don't need a variable diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c index c430418248b4..d13c8853ee82 100644 --- a/drivers/net/wireless/iwmc3200wifi/hal.c +++ b/drivers/net/wireless/iwmc3200wifi/hal.c @@ -411,7 +411,7 @@ static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr, /* * iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC. * Sending command to the LMAC is equivalent to sending a - * regular UMAC command with the LMAC passtrough or the LMAC + * regular UMAC command with the LMAC passthrough or the LMAC * wrapper UMAC command IDs. */ int iwm_hal_send_host_cmd(struct iwm_priv *iwm, diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 771a301003c9..8ddb51a2a977 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -1448,7 +1448,7 @@ static void iwm_rx_process_packet(struct iwm_priv *iwm, kfree_skb(packet->skb); break; default: - IWM_ERR(iwm, "Unknow ticket action: %d\n", + IWM_ERR(iwm, "Unknown ticket action: %d\n", le16_to_cpu(ticket_node->ticket->action)); kfree_skb(packet->skb); } diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 485a8d406525..afe6abecc044 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -934,7 +934,7 @@ static int if_sdio_probe(struct sdio_func *func, } if (i == ARRAY_SIZE(if_sdio_models)) { - lbs_pr_err("unkown card model 0x%x\n", card->model); + lbs_pr_err("unknown card model 0x%x\n", card->model); ret = -ENODEV; goto free; } diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index bc08464d8323..f7f5c793514b 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -1897,7 +1897,7 @@ prism54_get_mac(struct net_device *ndev, struct iw_request_info *info, return 0; } -/* Setting policy also clears the MAC acl, even if we don't change the defaut +/* Setting policy also clears the MAC acl, even if we don't change the default * policy */ @@ -2323,7 +2323,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, case DOT11_OID_BEACON: send_formatted_event(priv, - "Received a beacon from an unkown AP", + "Received a beacon from an unknown AP", mlme, 0); break; diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index ccd644104ad1..aced05775693 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -35,7 +35,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 100 diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 54d37957883c..3db9041838a4 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -46,7 +46,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 121 diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index b01edca42583..d3000827883a 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -46,7 +46,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 93eb699165cc..77b5116f549b 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -37,7 +37,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 81fe0be51c42..e194332dac5f 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -37,7 +37,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 431a20ec6db6..b3b0b5b685c6 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -4011,7 +4011,7 @@ wavelan_interrupt(int irq, #endif /* Prevent reentrancy. We need to do that because we may have - * multiple interrupt handler running concurently. + * multiple interrupt handler running concurrently. * It is safe because interrupts are disabled before aquiring * the spinlock. */ spin_lock(&lp->spinlock); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6d666359a42f..2b7f96594373 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -312,7 +312,7 @@ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, * zd_mac_tx_failed - callback for failed frames * @dev: the mac80211 wireless device * - * This function is called if a frame couldn't be succesfully be + * This function is called if a frame couldn't be successfully be * transferred. The first frame from the tx queue, will be selected and * reported as error to the upper layers. */ diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index a6b4a5a53d40..f511e70d454c 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -650,7 +650,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt) * Mark the I/O Pdir entries invalid and blow away the corresponding I/O * TLB entries. * - * FIXME: at some threshhold it might be "cheaper" to just blow + * FIXME: at some threshold it might be "cheaper" to just blow * away the entire I/O TLB instead of individual entries. * * FIXME: Uturn has 256 TLB entries. We don't need to purge every diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d93108d148fc..36db20a8f892 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6533,7 +6533,7 @@ static struct ibm_struct volume_driver_data = { * The speeds are stored on handles * (FANA:FAN9), (FANC:FANB), (FANE:FAND). * - * There are three default speed sets, acessible as handles: + * There are three default speed sets, accessible as handles: * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H * * ACPI DSDT switches which set is in use depending on various diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index 87b4f49a5251..a5135ebe5f07 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -191,7 +191,7 @@ static unsigned char *pnpbios_parse_allocated_resource_data(struct pnp_dev *dev, return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -405,7 +405,7 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, case SMALL_TAG_END: return p + 2; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -475,7 +475,7 @@ static unsigned char *pnpbios_parse_compatible_ids(unsigned char *p, return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -744,7 +744,7 @@ static unsigned char *pnpbios_encode_allocated_resource_data(struct pnp_dev return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 88cb74088611..3cbaf1811bd0 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -46,7 +46,7 @@ /** * struct ps3_sys_manager_header - System manager message header. * @version: Header version, currently 1. - * @size: Header size in bytes, curently 16. + * @size: Header size in bytes, currently 16. * @payload_size: Message payload size in bytes. * @service_id: Message type, one of enum ps3_sys_manager_service_id. * @request_tag: Unique number to identify reply. diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index ad164056feb6..434e92fdb966 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -335,7 +335,7 @@ static int rtc_probe(struct platform_device *pdev) goto err_io; } - /* Make sure frequency measurment mode, test modes, and lock + /* Make sure frequency measurement mode, test modes, and lock * are all disabled */ v3020_set_reg(chip, V3020_STATUS_0, 0x0); diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c index 097d3846a828..f54b1eec6ddf 100644 --- a/drivers/s390/char/fs3270.c +++ b/drivers/s390/char/fs3270.c @@ -74,7 +74,7 @@ fs3270_do_io(struct raw3270_view *view, struct raw3270_request *rq) } rc = raw3270_start(view, rq); if (rc == 0) { - /* Started sucessfully. Now wait for completion. */ + /* Started successfully. Now wait for completion. */ wait_event(fp->wait, raw3270_request_final(rq)); } } while (rc == -EACCES); diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 8ab51608da55..c268a2e5b7c3 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -65,7 +65,7 @@ static void set_chp_logically_online(struct chp_id chpid, int onoff) chpid_to_chp(chpid)->state = onoff; } -/* On succes return 0 if channel-path is varied offline, 1 if it is varied +/* On success return 0 if channel-path is varied offline, 1 if it is varied * online. Return -ENODEV if channel-path is not registered. */ int chp_get_status(struct chp_id chpid) { diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c index 30f516111307..2985eb439485 100644 --- a/drivers/s390/cio/cmf.c +++ b/drivers/s390/cio/cmf.c @@ -462,7 +462,7 @@ static struct cmb_area cmb_area = { * block of memory, which can not be moved as long as any channel * is active. Therefore, a maximum number of subchannels needs to * be defined somewhere. This is a module parameter, defaulting to - * a resonable value of 1024, or 32 kb of memory. + * a reasonable value of 1024, or 32 kb of memory. * Current kernels don't allow kmalloc with more than 128kb, so the * maximum is 4096. */ diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index 58e583b61e60..aa2b60a868ba 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -92,11 +92,11 @@ #define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */ #define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */ #define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */ -#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperarture */ +#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */ /* monitor */ #define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */ #define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */ -#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperarture */ +#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */ #define ENVCTRL_GLOBALADDR_MON 8 /* global address */ /* Child device type. diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index f5a9addb7050..07ce9bfcdf06 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -1491,7 +1491,7 @@ NCR_700_intr(int irq, void *dev_id) unsigned long flags; int handled = 0; - /* Use the host lock to serialise acess to the 53c700 + /* Use the host lock to serialise access to the 53c700 * hardware. Note: In future, we may need to take the queue * lock to enter the done routines. When that happens, we * need to ensure that for this driver, the host lock and the diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index cdbdec9f4fb2..83986ed86556 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -526,10 +526,10 @@ struct aac_driver_ident /* * The adapter interface specs all queues to be located in the same - * physically contigous block. The host structure that defines the + * physically contiguous block. The host structure that defines the * commuication queues will assume they are each a separate physically - * contigous memory region that will support them all being one big - * contigous block. + * contiguous memory region that will support them all being one big + * contiguous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index d598eba630d0..666d5151d628 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -226,7 +226,7 @@ static int aac_comm_init(struct aac_dev * dev) spin_lock_init(&dev->fib_lock); /* - * Allocate the physically contigous space for the commuication + * Allocate the physically contiguous space for the commuication * queue headers. */ diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq index 3b66b5ae3d9f..2fb78e35a9e5 100644 --- a/drivers/scsi/aic7xxx/aic79xx.seq +++ b/drivers/scsi/aic7xxx/aic79xx.seq @@ -217,7 +217,7 @@ BEGIN_CRITICAL; scbdma_tohost_done: test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone; /* - * An SCB has been succesfully uploaded to the host. + * An SCB has been successfully uploaded to the host. * If the SCB was uploaded for some reason other than * bad SCSI status (currently only for underruns), we * queue the SCB for normal completion. Otherwise, we diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 63b521d615f2..4d419c155ce9 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index 8dfb59d58992..45aa728a76b2 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h index a000bc4e2d4a..bf320412ee24 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h @@ -61,7 +61,7 @@ enum bfa_pport_speed { * Port operational type (in sync with SNIA port type). */ enum bfa_pport_type { - BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */ + BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unknown */ BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */ BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */ BFA_PPORT_TYPE_NLPORT = 6, /* public loop */ diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h index 31881d218515..ade763dbc8ce 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h @@ -25,7 +25,7 @@ * Temperature sensor status values */ enum bfa_tsensor_status { - BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */ + BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unknown status */ BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */ BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */ BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */ diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index a0e7e711ff9d..5be67a6fca93 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -834,7 +834,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) atomic_read(&hba->resetting) == 0, 60 * HZ); if (atomic_read(&hba->resetting)) { - /* IOP is in unkown state, abort reset */ + /* IOP is in unknown state, abort reset */ printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no); return -1; } diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index bd2f77197447..6486ae4591b8 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -56,7 +56,7 @@ * at the same time. * * When discovery succeeds or fails a callback is made to the lport as - * notification. Currently, succesful discovery causes the lport to take no + * notification. Currently, successful discovery causes the lport to take no * action. A failure will cause the lport to reset. There is likely a circular * locking problem with this implementation. */ diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 2e0746d70303..ca25ee5190b0 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) * iscsi_tcp_task_xmit - xmit normal PDU task * @task: iscsi command task * - * We're expected to return 0 when everything was transmitted succesfully, + * We're expected to return 0 when everything was transmitted successfully, * -EAGAIN if there's still data in the queue, or != 0 for any other kind * of error. */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e1a30a16a9fa..9bd19aa14249 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -654,7 +654,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) * Notes: * Assumes any error from lpfc_selective_reset() will be negative. * If lpfc_selective_reset() returns zero then the length of the buffer - * is returned which indicates succcess + * is returned which indicates success * * Returns: * -EINVAL if the buffer does not contain the string "selective" @@ -3147,7 +3147,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. - * @buf: if succesful contains the data from the adapter IOREG space. + * @buf: if successful contains the data from the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 45337cd23feb..a14ab4580d4e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -802,7 +802,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* FLOGI completes successfully */ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, - "0101 FLOGI completes sucessfully " + "0101 FLOGI completes successfully " "Data: x%x x%x x%x x%x\n", irsp->un.ulpWord[4], sp->cmn.e_d_tov, sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution); @@ -4133,7 +4133,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, /* Indicate we are walking fc_rscn_id_list on this vport */ vport->fc_rscn_flush = 1; spin_unlock_irq(shost->host_lock); - /* Get the array count after sucessfully have the token */ + /* Get the array count after successfully have the token */ rscn_cnt = vport->fc_rscn_id_cnt; /* If we are already processing an RSCN, save the received * RSCN payload buffer, cmdiocb->context2 to process later. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 562d8cee874b..82f8ab5c72cd 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -645,7 +645,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -700,7 +700,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -755,7 +755,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba) * uninitialization after the HBA is reset when bring down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ int @@ -1254,7 +1254,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) * routine from the API jump table function pointer from the lpfc_hba struct. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ void @@ -3124,7 +3124,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode) * PCI devices. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3220,7 +3220,7 @@ lpfc_reset_hba(struct lpfc_hba *phba) * support the SLI-3 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3321,7 +3321,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba) * support the SLI-4 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3642,7 +3642,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3688,7 +3688,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3753,7 +3753,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba) * list and set up the IOCB tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3872,7 +3872,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba) * list and set up the sgl xritag tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3986,7 +3986,7 @@ out_free_mem: * enabled and the driver is reinitializing the device. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4146,7 +4146,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) * PCI device data structure is set. * * Return codes - * pointer to @phba - sucessful + * pointer to @phba - successful * NULL - error **/ static struct lpfc_hba * @@ -4202,7 +4202,7 @@ lpfc_hba_free(struct lpfc_hba *phba) * host with it. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4365,7 +4365,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba) * with SLI-3 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4662,7 +4662,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf) * this routine. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -4761,7 +4761,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) * allocation for the port. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4861,7 +4861,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) * HBA consistent with the SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4910,7 +4910,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba) * we just use some constant number as place holder. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5218,7 +5218,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5286,7 +5286,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba) * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5552,7 +5552,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5599,7 +5599,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba) * Later, this can be used for all the slow-path events. * * Return codes - * 0 - sucessful + * 0 - successful * -ENOMEM - No availble memory **/ static int @@ -5760,7 +5760,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba) * all resources assigned to the PCI function which originates this request. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5923,7 +5923,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi) * with SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6052,7 +6052,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba) * will be left with MSI-X enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6184,7 +6184,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba) * is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error */ static int @@ -6243,7 +6243,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t @@ -6333,7 +6333,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba) * enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6443,7 +6443,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba) * which is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6508,7 +6508,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 43cbe336f1f8..42d4f3dae1d6 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1794,7 +1794,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) */ if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) == MBX_SHUTDOWN) { - /* Unknow mailbox command compl */ + /* Unknown mailbox command compl */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "(%d):0323 Unknown Mailbox command " "x%x (x%x) Cmpl\n", @@ -4163,7 +4163,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, * addition, this routine gets the port vpd data. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -11091,7 +11091,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba) * sequential. * * Return codes - * 0 - sucessful + * 0 - successful * EIO - The mailbox failed to complete successfully. * When this error occurs, the driver is not guaranteed * to have any rpi regions posted to the device and @@ -11129,7 +11129,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) * maps up to 64 rpi context regions. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No available memory * EIO - The mailbox failed to complete successfully. **/ @@ -11191,7 +11191,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) * PAGE_SIZE modulo 64 rpi context headers. * * Returns - * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful + * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful * LPFC_RPI_ALLOC_ERROR if no rpis are available. **/ int diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 512c2cc1a33f..d310f49d077e 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -381,7 +381,7 @@ typedef struct { u8 battery_status; /* * BIT 0: battery module missing * BIT 1: VBAD - * BIT 2: temprature high + * BIT 2: temperature high * BIT 3: battery pack missing * BIT 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h index b25b74764ec3..ce2487a888ed 100644 --- a/drivers/scsi/megaraid/mbox_defs.h +++ b/drivers/scsi/megaraid/mbox_defs.h @@ -497,7 +497,7 @@ typedef struct { * @inserted_drive : channel:Id of inserted drive * @battery_status : bit 0: battery module missing * bit 1: VBAD - * bit 2: temprature high + * bit 2: temperature high * bit 3: battery pack missing * bit 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 234f0b7eb21c..f9ae8037a710 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -2704,7 +2704,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp) } else { con_log(CL_ANN, (KERN_NOTICE - "megaraid mbox: reset sequence completed sucessfully\n")); + "megaraid mbox: reset sequence completed successfully\n")); } diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 86ab32d7ab15..756e509d495c 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2894,7 +2894,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data) #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** - * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request * @ioc: per adapter object * @scmd: pointer to scsi command object * @mpi_reply: reply mf payload returned from firmware diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index e3c482aa87b5..a2d569828308 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -6495,7 +6495,7 @@ static void ncr_int_ma (struct ncb *np) ** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids ** bloat for such a should_not_happen situation). ** In all other situation, we reset the BUS. - ** Are these assumptions reasonnable ? (Wait and see ...) + ** Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index f7c70e2a8224..d3d39f86fcf7 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3342,7 +3342,7 @@ static int pmcraid_chr_fasync(int fd, struct file *filep, int mode) * @direction : data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static int pmcraid_build_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3401,7 +3401,7 @@ static int pmcraid_build_passthrough_ioadls( * @direction: data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static void pmcraid_release_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3429,7 +3429,7 @@ static void pmcraid_release_passthrough_ioadls( * @arg: pointer to pmcraid_passthrough_buffer user buffer * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static long pmcraid_ioctl_passthrough( struct pmcraid_instance *pinstance, diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 3441b3f90827..2752b56cad56 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -771,11 +771,11 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { {0x01180600, IOASC_LOG_LEVEL_MUST, "Recovered Error, soft media error, sector reassignment suggested"}, {0x015D0000, IOASC_LOG_LEVEL_MUST, - "Recovered Error, failure prediction thresold exceeded"}, + "Recovered Error, failure prediction threshold exceeded"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x02048000, IOASC_LOG_LEVEL_MUST, "Not Ready, IOA Reset Required"}, {0x02408500, IOASC_LOG_LEVEL_MUST, diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index 723fdecd91bd..0fd6ae6911ad 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg); * @data_buf: pointer to vendor unique data buffer * * Returns: - * 0 on succesful return + * 0 on successful return * otherwise, failing error code * * Notes: diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index fd47cb1bee1b..f27e52d963d3 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add); * * Note: * This function must only be called on a PHY that has not - * sucessfully been added using sas_phy_add(). + * successfully been added using sas_phy_add(). */ void sas_phy_free(struct sas_phy *phy) { @@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add); * * Note: * This function must only be called on a PORT that has not - * sucessfully been added using sas_port_add(). + * successfully been added using sas_port_add(). */ void sas_port_free(struct sas_port *port) { @@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add); * * Note: * This function must only be called on a remote - * PHY that has not sucessfully been added using + * PHY that has not successfully been added using * sas_rphy_add() (or has been sas_rphy_remove()'d) */ void sas_rphy_free(struct sas_rphy *rphy) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 45374d66d26a..2b38f6ad6e11 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) * * This routine is similar to sym_set_workarounds(), except * that, at this point, we already know that the device was - * succesfully intialized at least once before, and so most + * successfully intialized at least once before, and so most * of the steps taken there are un-needed here. */ static void sym2_reset_workarounds(struct pci_dev *pdev) diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 297deb817a5d..a7bc8b7b09ac 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2692,7 +2692,7 @@ static void sym_int_ma (struct sym_hcb *np) * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids * bloat for such a should_not_happen situation). * In all other situation, we reset the BUS. - * Are these assumptions reasonnable ? (Wait and see ...) + * Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 053e63c86822..5a80cbac3f92 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -54,7 +54,7 @@ * * SYM_OPT_LIMIT_COMMAND_REORDERING * When this option is set, the driver tries to limit tagged - * command reordering to some reasonnable value. + * command reordering to some reasonable value. * (set for Linux) */ #if 0 diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index d71dfe398940..36ede02ceacf 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -361,9 +361,9 @@ static const struct pnp_device_id pnp_dev_table[] = { { "LTS0001", 0 }, /* Rockwell's (PORALiNK) 33600 INT PNP */ { "WCI0003", 0 }, - /* Unkown PnP modems */ + /* Unknown PnP modems */ { "PNPCXXX", UNKNOWN_DEV }, - /* More unkown PnP modems */ + /* More unknown PnP modems */ { "PNPDXXX", UNKNOWN_DEV }, { "", 0 } }; diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index 570b0d925e83..f6e77f12acd5 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -73,7 +73,7 @@ static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) } /* - * Register acessors. Note that we don't need to enforce a recovery + * Register accessors. Note that we don't need to enforce a recovery * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, * though if we try to use this driver on older machines, we might have * to add it back diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 0c08f286a2ef..46de564aaea0 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -313,7 +313,7 @@ static void qe_uart_stop_tx(struct uart_port *port) * This function will attempt to stuff of all the characters from the * kernel's transmit buffer into TX BDs. * - * A return value of non-zero indicates that it sucessfully stuffed all + * A return value of non-zero indicates that it successfully stuffed all * characters from the kernel buffer. * * A return value of zero indicates that there are still characters in the diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index 40de151f2789..e89304c72568 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -4190,7 +4190,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0x1224, j); ixj_WriteDSPCommand(0xE014, j); - ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */ + ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */ ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */ @@ -4235,7 +4235,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0x1224, j); ixj_WriteDSPCommand(0xE014, j); - ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */ + ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */ ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */ diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index d171b563e94c..bba4d3eabe0f 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1958,7 +1958,7 @@ static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr) goto bad1; /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to - * the first MEMACESS cmv. Ignore it... + * the first MEMACCESS cmv. Ignore it... */ if (cmv->bFunction != dsc->function) { if (UEA_CHIP_VERSION(sc) == ADI930 diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 2473cf0c6b1d..b4bd2411c666 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -1,5 +1,5 @@ /** - * drivers/usb/class/usbtmc.c - USB Test & Measurment class driver + * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver * * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany * Copyright (C) 2008 Novell, Inc. diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index da718e84d58d..e80f1af438c8 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1890,7 +1890,7 @@ static void cancel_async_set_config(struct usb_device *udev) * routine gets around the normal restrictions by using a work thread to * submit the change-config request. * - * Returns 0 if the request was succesfully queued, error code otherwise. + * Returns 0 if the request was successfully queued, error code otherwise. * The caller has no way to know whether the queued request will eventually * succeed. */ diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 7953948bfe4a..4e3657808b0f 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -432,7 +432,7 @@ static void acm_disable(struct usb_function *f) * @length: size of data * Context: irqs blocked, acm->lock held, acm_notify_req non-null * - * Returns zero on sucess or a negative errno. + * Returns zero on success or a negative errno. * * See section 6.3.5 of the CDC 1.1 specification for information * about the only notification we issue: SerialState change. diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 1937d8c7b433..adda1208a1ec 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1524,7 +1524,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget) * pxa_udc_wakeup - Force udc device out of suspend * @_gadget: usb gadget * - * Returns 0 if succesfull, error code otherwise + * Returns 0 if successfull, error code otherwise */ static int pxa_udc_wakeup(struct usb_gadget *_gadget) { diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 62a226b61670..00a29855d0c4 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -627,7 +627,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) /* - * Process normal completions(error or sucess) and clean the schedule. + * Process normal completions(error or success) and clean the schedule. * * This is the main path for handing urbs back to drivers. The only other patth * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 9ec7fd5da489..9579cf4c38bf 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -111,7 +111,7 @@ struct aes_ccm_b1 { * * CCM uses Ax blocks to generate a keystream with which the MIC and * the message's payload are encoded. A0 always encrypts/decrypts the - * MIC. Ax (x>0) are used for the sucesive payload blocks. + * MIC. Ax (x>0) are used for the successive payload blocks. * * The x is the counter, and is increased for each block. */ diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 613a5fc490d3..489b47833e2c 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -558,7 +558,7 @@ static void wa_seg_dto_cb(struct urb *urb) /* * Callback for the segment request * - * If succesful transition state (unless already transitioned or + * If successful transition state (unless already transitioned or * outbound transfer); otherwise, take a note of the error, mark this * segment done and try completion. * @@ -1364,7 +1364,7 @@ segment_aborted: /* * Callback for the IN data phase * - * If succesful transition state; otherwise, take a note of the + * If successful transition state; otherwise, take a note of the * error, mark this segment done and try completion. * * Note we don't access until we are sure that the transfer hasn't diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index c7080d497311..0bb665a0c024 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -229,7 +229,7 @@ void i1480_usb_neep_cb(struct urb *urb) * will verify it. * * Set i1480->evt_result with the result of getting the event or its - * size (if succesful). + * size (if successful). * * Delivers the data directly to i1480->evt_buf */ diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c index 86a853b84119..7350ed6909f8 100644 --- a/drivers/uwb/wlp/txrx.c +++ b/drivers/uwb/wlp/txrx.c @@ -282,7 +282,7 @@ EXPORT_SYMBOL_GPL(wlp_receive_frame); * and transmission will be done by the calling function. * @dst: On return this will contain the device address to which the * frame is destined. - * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, + * @returns: 0 on success no tx : WLP header successfully applied to skb buffer, * calling function can proceed with tx * 1 on success with tx : WLP will take over transmission of this * frame diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 913b4a47ae52..1ddeb4c34763 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -3276,7 +3276,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "24 bit interface"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } else { switch (format & 7) { @@ -3299,7 +3299,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "262144 colours (FDPI-2 mode)"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } PRINTKI("%s%s %s monitor detected: %s\n", diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c index 505c0823a105..2cf7ba52f67c 100644 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -158,7 +158,7 @@ static int atmel_pwm_bl_probe(struct platform_device *pdev) goto err_free_pwm; } - /* Turn display off by defatult. */ + /* Turn display off by default. */ retval = gpio_direction_output(pwmbl->gpio_on, 0 ^ pdata->on_active_low); if (retval) diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c index 50ec17dfc517..fa32b94a4546 100644 --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -177,7 +177,7 @@ static int __devinit tosa_lcd_probe(struct spi_device *spi) if (!data) return -ENOMEM; - data->is_vga = true; /* defaut to VGA mode */ + data->is_vga = true; /* default to VGA mode */ /* * bits_per_word cannot be configured in platform data diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index 857b3668b3ba..6468a297e341 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -436,7 +436,7 @@ sti_init_glob_cfg(struct sti_struct *sti, (offs < PCI_BASE_ADDRESS_0 || offs > PCI_BASE_ADDRESS_5)) { printk (KERN_WARNING - "STI pci region maping for region %d (%02x) can't be mapped\n", + "STI pci region mapping for region %d (%02x) can't be mapped\n", i,sti->rm_entry[i]); continue; } diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 1a83709f9611..492e6e64b653 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -701,7 +701,7 @@ static int gbefb_set_par(struct fb_info *info) blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit, 16bit and 32 bit modes (64 kB). They cover the screen with partial tiles on the right and/or bottom of the screen if needed. - For exemple in 640x480 8 bit mode the mapping is: + For example in 640x480 8 bit mode the mapping is: <-------- 640 -----> <---- 512 ----><128|384 offscreen> diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index 6120f0c526fe..876648e15e9d 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -756,9 +756,9 @@ hyperResetPlanes(struct stifb_info *fb, int enable) if (fb->info.var.bits_per_pixel == 32) controlPlaneReg = 0x04000F00; else - controlPlaneReg = 0x00000F00; /* 0x00000800 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000800 should be enough, but lets clear all 4 bits */ else - controlPlaneReg = 0x00000F00; /* 0x00000100 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */ switch (enable) { case ENABLE: diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c index ff43c8885028..980548390048 100644 --- a/drivers/video/tdfxfb.c +++ b/drivers/video/tdfxfb.c @@ -52,7 +52,7 @@ * * 0.1.3 (released 1999-11-02) added Attila's panning support, code * reorg, hwcursor address page size alignment - * (for mmaping both frame buffer and regs), + * (for mmapping both frame buffer and regs), * and my changes to get rid of hardcoded * VGA i/o register locations (uses PCI * configuration info now) diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c index c5c32b6b6e6c..67b36932212b 100644 --- a/drivers/video/via/dvi.c +++ b/drivers/video/via/dvi.c @@ -467,7 +467,7 @@ static int dvi_get_panel_size_from_DDCv1(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d !\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\ set default panel size.\n", max_h); break; } @@ -534,7 +534,7 @@ static int dvi_get_panel_size_from_DDCv2(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d!\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\ set default panel size.\n", HSize); break; } diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c index 3df17dc8c3d7..65ccd215d496 100644 --- a/drivers/video/vt8623fb.c +++ b/drivers/video/vt8623fb.c @@ -446,7 +446,7 @@ static int vt8623fb_set_par(struct fb_info *info) svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus - svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold + svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read threshold vga_wseq(NULL, 0x17, 0x1F); // FIFO depth vga_wseq(NULL, 0x18, 0x4E); svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ? diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index 381026c0bd7b..923cc68dba26 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -508,7 +508,7 @@ void coh901327_watchdog_reset(void) * deactivating the watchdog before it is shut down by it. * * NOTE: on future versions of the watchdog, this restriction is - * gone: the watchdog will be reloaded with a defaul value (1 min) + * gone: the watchdog will be reloaded with a default value (1 min) * instead of last value, and you can conveniently set the watchdog * timeout to 10ms (value = 1) without any problems. */ diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index b6b3f59ab446..47d719717a3b 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -21,7 +21,7 @@ * wd#1 - 2 seconds; * wd#2 - 7.2 ms; * After the expiration of wd#1, it can generate a NMI, SCI, SMI, or - * a system RESET and it starts wd#2 that unconditionaly will RESET + * a system RESET and it starts wd#2 that unconditionally will RESET * the system when the counter reaches zero. * * 14-Dec-2001 Matt Domsch diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 3bde56bce63a..5bfb1f2c5319 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -542,7 +542,7 @@ static struct notifier_block wdrtas_notifier = { /** * wdrtas_get_tokens - reads in RTAS tokens * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * wdrtas_get_tokens reads in the tokens for the RTAS calls used in * this watchdog driver. It tolerates, if "get-sensor-state" and @@ -598,7 +598,7 @@ static void wdrtas_unregister_devs(void) /** * wdrtas_register_devs - registers the misc dev handlers * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * wdrtas_register_devs registers the watchdog and temperature watchdog * misc devs @@ -630,7 +630,7 @@ static int wdrtas_register_devs(void) /** * wdrtas_init - init function of the watchdog driver * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * registers the file handlers and the reboot notifier */ diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index b9b3bb51b1e4..d15ea1790bfb 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -767,7 +767,7 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) current->mm->start_stack = bprm->p; - /* Now we do a little grungy work by mmaping the ELF image into + /* Now we do a little grungy work by mmapping the ELF image into the correct location in memory. */ for(i = 0, elf_ppnt = elf_phdata; i < loc->elf_ex.e_phnum; i++, elf_ppnt++) { diff --git a/fs/bio.c b/fs/bio.c index 12da5db8682c..2bd671a08e3b 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -272,7 +272,7 @@ EXPORT_SYMBOL(bio_init); * for a &struct bio to become free. If a %NULL @bs is passed in, we will * fall back to just using @kmalloc to allocate the required memory. * - * Note that the caller must set ->bi_destructor on succesful return + * Note that the caller must set ->bi_destructor on successful return * of a bio, to do the appropriate freeing of the bio once the reference * count drops to zero. **/ diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 2c726b7b9faa..6815d2a84b94 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -256,7 +256,7 @@ out: * Insert @em into @tree or perform a simple forward/backward merge with * existing mappings. The extent_map struct passed in will be inserted * into the tree directly, with an additional reference taken, or a - * reference dropped if the merge attempt was sucessfull. + * reference dropped if the merge attempt was successfull. */ int add_extent_mapping(struct extent_map_tree *tree, struct extent_map *em) diff --git a/fs/cifs/README b/fs/cifs/README index 79c1a93400be..a727b7cb075f 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -423,7 +423,7 @@ A partial list of the supported mount options follows: source name to use to represent the client netbios machine name when doing the RFC1001 netbios session initialize. direct Do not do inode data caching on files opened on this mount. - This precludes mmaping files on this mount. In some cases + This precludes mmapping files on this mount. In some cases with fast networks and little or no caching benefits on the client (e.g. when the application is doing large sequential reads bigger than page size without rereading the same data) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 5d0fde18039c..4b35f7ec0583 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -39,7 +39,7 @@ /* * MAX_REQ is the maximum number of requests that WE will send - * on one socket concurently. It also matches the most common + * on one socket concurrently. It also matches the most common * value of max multiplex returned by servers. We may * eventually want to use the negotiated value (in case * future servers can handle more) when we are more confident that diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5e2492535daa..83580213fcac 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -917,8 +917,8 @@ undo_setattr: /* * If dentry->d_inode is null (usually meaning the cached dentry * is a negative dentry) then we would attempt a standard SMB delete, but - * if that fails we can not attempt the fall back mechanisms on EACESS - * but will return the EACESS to the caller. Note that the VFS does not call + * if that fails we can not attempt the fall back mechanisms on EACCESS + * but will return the EACCESS to the caller. Note that the VFS does not call * unlink on negative dentries currently. */ int cifs_unlink(struct inode *dir, struct dentry *dentry) diff --git a/fs/cifs/smbdes.c b/fs/cifs/smbdes.c index 224a1f478966..b6b6dcb500bf 100644 --- a/fs/cifs/smbdes.c +++ b/fs/cifs/smbdes.c @@ -371,7 +371,7 @@ E_P24(unsigned char *p21, const unsigned char *c8, unsigned char *p24) smbhash(p24 + 16, c8, p21 + 14, 1); } -#if 0 /* currently unsued */ +#if 0 /* currently unused */ static void D_P16(unsigned char *p14, unsigned char *in, unsigned char *out) { diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c index 16f682e26c07..b540aa5d1f61 100644 --- a/fs/dlm/plock.c +++ b/fs/dlm/plock.c @@ -143,7 +143,7 @@ out: } EXPORT_SYMBOL_GPL(dlm_posix_lock); -/* Returns failure iff a succesful lock operation should be canceled */ +/* Returns failure iff a successful lock operation should be canceled */ static int dlm_plock_callback(struct plock_op *op) { struct file *file; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 618ca95cbb59..0282ec78cf8f 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2932,7 +2932,7 @@ retry: ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, &mpd); /* - * If we have a contigous extent of pages and we + * If we have a contiguous extent of pages and we * haven't done the I/O yet, map the blocks and submit * them for I/O. */ @@ -5370,7 +5370,7 @@ static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) * worse case, the indexs blocks spread over different block groups * * If datablocks are discontiguous, they are possible to spread over - * different block groups too. If they are contiugous, with flexbg, + * different block groups too. If they are contiuguous, with flexbg, * they could still across block group boundary. * * Also account for superblock, inode, quota and xattr blocks @@ -5446,7 +5446,7 @@ int ext4_writepage_trans_blocks(struct inode *inode) * Calculate the journal credits for a chunk of data modification. * * This is called from DIO, fallocate or whoever calling - * ext4_get_blocks() to map/allocate a chunk of contigous disk blocks. + * ext4_get_blocks() to map/allocate a chunk of contiguous disk blocks. * * journal buffers for data blocks are not included here, as DIO * and fallocate do no need to journal data buffers. diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index bba12824defa..74e495dabe09 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -142,7 +142,7 @@ * 2 blocks and the order of allocation is >= sbi->s_mb_order2_reqs. The * value of s_mb_order2_reqs can be tuned via * /sys/fs/ext4//mb_order2_req. If the request len is equal to - * stripe size (sbi->s_stripe), we try to search for contigous block in + * stripe size (sbi->s_stripe), we try to search for contiguous block in * stripe size. This should result in better allocation on RAID setups. If * not, we search in the specific group using bitmap for best extents. The * tunable min_to_scan and max_to_scan control the behaviour here. diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c index f25e70c1b51c..f0294410868d 100644 --- a/fs/jffs2/compr.c +++ b/fs/jffs2/compr.c @@ -177,7 +177,7 @@ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, spin_unlock(&jffs2_compressor_list_lock); break; default: - printk(KERN_ERR "JFFS2: unknow compression mode.\n"); + printk(KERN_ERR "JFFS2: unknown compression mode.\n"); } out: if (ret == JFFS2_COMPR_NONE) { diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c index 1a80301004b8..378991cfe40f 100644 --- a/fs/jffs2/readinode.c +++ b/fs/jffs2/readinode.c @@ -931,7 +931,7 @@ static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_re * Helper function for jffs2_get_inode_nodes(). * The function detects whether more data should be read and reads it if yes. * - * Returns: 0 on succes; + * Returns: 0 on success; * negative error code on failure. */ static int read_more(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref, diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c index 082e844ab2db..4b107881acd5 100644 --- a/fs/jffs2/xattr.c +++ b/fs/jffs2/xattr.c @@ -31,7 +31,7 @@ * is used to release xattr name/value pair and detach from c->xattrindex. * reclaim_xattr_datum(c) * is used to reclaim xattr name/value pairs on the xattr name/value pair cache when - * memory usage by cache is over c->xdatum_mem_threshold. Currentry, this threshold + * memory usage by cache is over c->xdatum_mem_threshold. Currently, this threshold * is hard coded as 32KiB. * do_verify_xattr_datum(c, xd) * is used to load the xdatum informations without name/value pair from the medium. diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 2bc7d8aa5740..d9b031cf69f5 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -755,7 +755,7 @@ int dbAlloc(struct inode *ip, s64 hint, s64 nblocks, s64 * results) * allocation group. */ if ((blkno & (bmp->db_agsize - 1)) == 0) - /* check if the AG is currenly being written to. + /* check if the AG is currently being written to. * if so, call dbNextAG() to find a non-busy * AG with sufficient free space. */ @@ -3337,7 +3337,7 @@ int dbExtendFS(struct inode *ipbmap, s64 blkno, s64 nblocks) for (i = 0, n = 0; i < agno; n++) { bmp->db_agfree[n] = 0; /* init collection point */ - /* coalesce cotiguous k AGs; */ + /* coalesce contiguous k AGs; */ for (j = 0; j < k && i < agno; j++, i++) { /* merge AGi to AGn */ bmp->db_agfree[n] += bmp->db_agfree[i]; diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c index 0d58caf4a6e1..ec8f45f12e05 100644 --- a/fs/ncpfs/ioctl.c +++ b/fs/ncpfs/ioctl.c @@ -835,7 +835,7 @@ static int ncp_ioctl_need_write(unsigned int cmd) case NCP_IOC_SETROOT: return 0; default: - /* unkown IOCTL command, assume write */ + /* unknown IOCTL command, assume write */ return 1; } } diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c index 9669541d0119..08f7530e9341 100644 --- a/fs/ntfs/compress.c +++ b/fs/ntfs/compress.c @@ -927,7 +927,7 @@ lock_retry_remap: return 0; ntfs_debug("Failed. Returning error code %s.", err == -EOVERFLOW ? - "EOVERFLOW" : (!err ? "EIO" : "unkown error")); + "EOVERFLOW" : (!err ? "EIO" : "unknown error")); return err < 0 ? err : -EIO; read_err: diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c index 663c0e341f8b..43179ddd336f 100644 --- a/fs/ntfs/file.c +++ b/fs/ntfs/file.c @@ -399,7 +399,7 @@ static inline void ntfs_fault_in_pages_readable_iovec(const struct iovec *iov, * @cached_page: allocated but as yet unused page * @lru_pvec: lru-buffering pagevec of caller * - * Obtain @nr_pages locked page cache pages from the mapping @maping and + * Obtain @nr_pages locked page cache pages from the mapping @mapping and * starting at index @index. * * If a page is newly created, increment its refcount and add it to the @@ -1281,7 +1281,7 @@ rl_not_mapped_enoent: /* * Copy as much as we can into the pages and return the number of bytes which - * were sucessfully copied. If a fault is encountered then clear the pages + * were successfully copied. If a fault is encountered then clear the pages * out to (ofs + bytes) and return the number of bytes which were copied. */ static inline size_t ntfs_copy_from_user(struct page **pages, diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c index 89b02985c054..4dadcdf3d451 100644 --- a/fs/ntfs/logfile.c +++ b/fs/ntfs/logfile.c @@ -338,7 +338,7 @@ err_out: * copy of the complete multi sector transfer deprotected page. On failure, * *@wrp is undefined. * - * Simillarly, if @lsn is not NULL, on succes *@lsn will be set to the current + * Simillarly, if @lsn is not NULL, on success *@lsn will be set to the current * logfile lsn according to this restart page. On failure, *@lsn is undefined. * * The following error codes are defined: diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 38a42f5d59ff..7c7198a5bc90 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -2398,7 +2398,7 @@ static int ocfs2_leftmost_rec_contains(struct ocfs2_extent_list *el, u32 cpos) * * The array is assumed to be large enough to hold an entire path (tree depth). * - * Upon succesful return from this function: + * Upon successful return from this function: * * - The 'right_path' array will contain a path to the leaf block * whose range contains e_cpos. diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 83bcaf266b35..03ccf9a7b1f4 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -2586,7 +2586,7 @@ fail: * is complete everywhere. if the target dies while this is * going on, some nodes could potentially see the target as the * master, so it is important that my recovery finds the migration - * mle and sets the master to UNKNONWN. */ + * mle and sets the master to UNKNOWN. */ /* wait for new node to assert master */ diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 0d38d67194cb..c5e4a49e3a12 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -1855,7 +1855,7 @@ int ocfs2_file_lock(struct file *file, int ex, int trylock) * outstanding lock request, so a cancel convert is * required. We intentionally overwrite 'ret' - if the * cancel fails and the lock was granted, it's easier - * to just bubble sucess back up to the user. + * to just bubble success back up to the user. */ ret = ocfs2_flock_handle_signal(lockres, level); } else if (!ret && (level > lockres->l_level)) { diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 54c16b66327e..bf34c491ae96 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -659,7 +659,7 @@ static int __ocfs2_journal_access(handle_t *handle, default: status = -EINVAL; - mlog(ML_ERROR, "Uknown access type!\n"); + mlog(ML_ERROR, "Unknown access type!\n"); } if (!status && ocfs2_meta_ecc(osb) && triggers) jbd2_journal_set_triggers(bh, &triggers->ot_triggers); diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 60287fc56bcb..d00c658ca150 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -2431,7 +2431,7 @@ out: * we gonna touch and whether we need to create new blocks. * * Normally the refcount blocks store these refcount should be - * continguous also, so that we can get the number easily. + * contiguous also, so that we can get the number easily. * As for meta_ac, we will at most add split 2 refcount record and * 2 more refcount block, so just check it in a rough way. * diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c index e1c0ec0ae989..082234581d05 100644 --- a/fs/omfs/bitmap.c +++ b/fs/omfs/bitmap.c @@ -85,7 +85,7 @@ out: } /* - * Tries to allocate exactly one block. Returns true if sucessful. + * Tries to allocate exactly one block. Returns true if successful. */ int omfs_allocate_block(struct super_block *sb, u64 block) { diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c index f94ddf7efba0..868a55ee080f 100644 --- a/fs/ubifs/recovery.c +++ b/fs/ubifs/recovery.c @@ -23,7 +23,7 @@ /* * This file implements functions needed to recover from unclean un-mounts. * When UBIFS is mounted, it checks a flag on the master node to determine if - * an un-mount was completed sucessfully. If not, the process of mounting + * an un-mount was completed successfully. If not, the process of mounting * incorparates additional checking and fixing of on-flash data structures. * UBIFS always cleans away all remnants of an unclean un-mount, so that * errors do not accumulate. However UBIFS defers recovery if it is mounted diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h index 6533ead9b889..a2c16bcee90b 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/quota/xfs_dquot.h @@ -98,7 +98,7 @@ typedef struct xfs_dquot { #define dq_flags q_lists.dqm_flags /* - * Lock hierachy for q_qlock: + * Lock hierarchy for q_qlock: * XFS_QLOCK_NORMAL is the implicit default, * XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2 */ diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h index 4c8d0afae711..fb2d63f13f4c 100644 --- a/include/asm-generic/memory_model.h +++ b/include/asm-generic/memory_model.h @@ -47,7 +47,7 @@ #elif defined(CONFIG_SPARSEMEM_VMEMMAP) -/* memmap is virtually contigious. */ +/* memmap is virtually contiguous. */ #define __pfn_to_page(pfn) (vmemmap + (pfn)) #define __page_to_pfn(page) (unsigned long)((page) - vmemmap) diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index d76b66acea95..7c38c147e5e6 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -631,7 +631,7 @@ __SYSCALL(__NR_perf_event_open, sys_perf_event_open) * these are provided for both review and as a porting * help for the C library version. * - * Last chance: are any of these important enought to + * Last chance: are any of these important enough to * enable by default? */ #ifdef __ARCH_WANT_SYSCALL_NO_AT diff --git a/include/linux/chio.h b/include/linux/chio.h index 519248d8b2b6..d9bac7f97282 100644 --- a/include/linux/chio.h +++ b/include/linux/chio.h @@ -21,7 +21,7 @@ * query vendor-specific element types * * accessing elements works by specifing type and unit of the element. - * for eample, storage elements are addressed with type = CHET_ST and + * for example, storage elements are addressed with type = CHET_ST and * unit = 0 .. cp_nslots-1 * */ diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index e5124ceea769..3402042ddc31 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -45,7 +45,7 @@ void pcap_set_ts_bits(struct pcap_chip *, u32); #define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff #define PCAP_MASK_ALL_INTERRUPT 0x01ffffff -/* registers acessible by both pcap ports */ +/* registers accessible by both pcap ports */ #define PCAP_REG_ISR 0x0 /* Interrupt Status */ #define PCAP_REG_MSR 0x1 /* Interrupt Mask */ #define PCAP_REG_PSTAT 0x2 /* Processor Status */ @@ -67,7 +67,7 @@ void pcap_set_ts_bits(struct pcap_chip *, u32); #define PCAP_REG_VENDOR_TEST1 0x1e #define PCAP_REG_VENDOR_TEST2 0x1f -/* registers acessible by pcap port 1 only (a1200, e2 & e6) */ +/* registers accessible by pcap port 1 only (a1200, e2 & e6) */ #define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */ #define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */ #define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */ diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index d745f5b6c7b0..76e5053e1fac 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -30,7 +30,7 @@ /* * use drive write caching -- we need deferred error handling to be - * able to sucessfully recover with this option (drive will return good + * able to successfully recover with this option (drive will return good * status as soon as the cdb is validated). */ #if defined(CONFIG_CDROM_PKTCDVD_WCACHE) diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index 850db2e80510..cf9327c051ad 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -216,10 +216,10 @@ #define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */ -#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */ -#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */ -#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */ -#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */ +#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */ +#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */ +#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */ +#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index b59e78c57161..dfd4745a955f 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -490,7 +490,7 @@ struct v4l2_jpegcompression { * you do, leave them untouched. * Inluding less markers will make the * resulting code smaller, but there will - * be fewer aplications which can read it. + * be fewer applications which can read it. * The presence of the APP and COM marker * is influenced by APP_len and COM_len * ONLY, not by this property! */ diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 6e5f0e0c7967..ca4789e4f1e1 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -988,7 +988,7 @@ struct sctp_transport { int init_sent_count; /* state : The current state of this destination, - * : i.e. SCTP_ACTIVE, SCTP_INACTIVE, SCTP_UNKOWN. + * : i.e. SCTP_ACTIVE, SCTP_INACTIVE, SCTP_UNKNOWN. */ int state; diff --git a/include/net/tcp.h b/include/net/tcp.h index 03a49c703377..1827e7f217d1 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1260,7 +1260,7 @@ static inline struct sk_buff *tcp_write_queue_prev(struct sock *sk, struct sk_bu skb_queue_walk_from_safe(&(sk)->sk_write_queue, skb, tmp) /* This function calculates a "timeout" which is equivalent to the timeout of a - * TCP connection after "boundary" unsucessful, exponentially backed-off + * TCP connection after "boundary" unsuccessful, exponentially backed-off * retransmissions with an initial RTO of TCP_RTO_MIN. */ static inline bool retransmits_timed_out(const struct sock *sk, diff --git a/include/net/wimax.h b/include/net/wimax.h index 2af7bf839f23..3b07f6aad102 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -79,7 +79,7 @@ * drivers have to only report state changes due to external * conditions. * - * All API operations are 'atomic', serialized thorough a mutex in the + * All API operations are 'atomic', serialized through a mutex in the * `struct wimax_dev`. * * EXPORTING TO USER SPACE THROUGH GENERIC NETLINK diff --git a/include/sound/wm8993.h b/include/sound/wm8993.h index 9c661f2f8cda..eee19f63c0d8 100644 --- a/include/sound/wm8993.h +++ b/include/sound/wm8993.h @@ -36,7 +36,7 @@ struct wm8993_platform_data { unsigned int micbias1_lvl:1; unsigned int micbias2_lvl:1; - /* Jack detect threashold levels, see datasheet for values */ + /* Jack detect threshold levels, see datasheet for values */ unsigned int jd_scthr:2; unsigned int jd_thr:2; }; diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 7f29643c8985..759a629cc4bc 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -419,7 +419,7 @@ static void perf_event_remove_from_context(struct perf_event *event) if (!task) { /* * Per cpu events are removed via an smp call and - * the removal is always sucessful. + * the removal is always successful. */ smp_call_function_single(event->cpu, __perf_event_remove_from_context, @@ -827,7 +827,7 @@ perf_install_in_context(struct perf_event_context *ctx, if (!task) { /* * Per cpu events are installed via an smp call and - * the install is always sucessful. + * the install is always successful. */ smp_call_function_single(cpu, __perf_install_in_context, event, 1); diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 234ceb10861f..456b2bc6b1ff 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -105,7 +105,7 @@ config DEBUG_SECTION_MISMATCH bool "Enable full Section mismatch analysis" depends on UNDEFINED # This option is on purpose disabled for now. - # It will be enabled when we are down to a resonable number + # It will be enabled when we are down to a reasonable number # of section mismatch warnings (< 10 for an allyesconfig build) help The section mismatch analysis checks if there are illegal diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c index 600f473a5610..76074209f9a2 100644 --- a/lib/decompress_bunzip2.c +++ b/lib/decompress_bunzip2.c @@ -299,7 +299,7 @@ static int INIT get_next_block(struct bunzip_data *bd) again when using them (during symbol decoding).*/ base = hufGroup->base-1; limit = hufGroup->limit-1; - /* Calculate permute[]. Concurently, initialize + /* Calculate permute[]. Concurrently, initialize * temp[] and limit[]. */ pp = 0; for (i = minLen; i <= maxLen; i++) { diff --git a/lib/dma-debug.c b/lib/dma-debug.c index ce6b7eabf674..d9b08e0f7f55 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -259,7 +259,7 @@ static struct dma_debug_entry *hash_bucket_find(struct hash_bucket *bucket, * times. Without a hardware IOMMU this results in the * same device addresses being put into the dma-debug * hash multiple times too. This can result in false - * positives being reported. Therfore we implement a + * positives being reported. Therefore we implement a * best-fit algorithm here which returns the entry from * the hash which fits best to the reference value * instead of the first-fit. diff --git a/lib/swiotlb.c b/lib/swiotlb.c index ac25cd28e807..853907e45868 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -453,7 +453,7 @@ do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir) /* * Return the buffer to the free list by setting the corresponding - * entries to indicate the number of contigous entries available. + * entries to indicate the number of contiguous entries available. * While returning the entries to the free list, we merge the entries * with slots below and above the pool being returned. */ diff --git a/mm/filemap.c b/mm/filemap.c index ef169f37156d..c3d3506ecaba 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1844,7 +1844,7 @@ static size_t __iovec_copy_from_user_inatomic(char *vaddr, /* * Copy as much as we can into the page and return the number of bytes which - * were sucessfully copied. If a fault is encountered then return the number of + * were successfully copied. If a fault is encountered then return the number of * bytes which were copied. */ size_t iov_iter_copy_from_user_atomic(struct page *page, diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 7226e60e52af..c31a310aa146 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -209,7 +209,7 @@ struct mem_cgroup { int prev_priority; /* for recording reclaim priority */ /* - * While reclaiming in a hiearchy, we cache the last child we + * While reclaiming in a hierarchy, we cache the last child we * reclaimed from. */ int last_scanned_child; @@ -2466,7 +2466,7 @@ static int mem_cgroup_hierarchy_write(struct cgroup *cont, struct cftype *cft, cgroup_lock(); /* - * If parent's use_hiearchy is set, we can't make any modifications + * If parent's use_hierarchy is set, we can't make any modifications * in the child subtrees. If it is unset, then the change can * occur, provided the current cgroup has no children. * diff --git a/mm/memory-failure.c b/mm/memory-failure.c index dacc64183874..1ac49fef95ab 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -174,7 +174,7 @@ static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno, list_for_each_entry_safe (tk, next, to_kill, nd) { if (doit) { /* - * In case something went wrong with munmaping + * In case something went wrong with munmapping * make sure the process doesn't catch the * signal and then access the memory. Just kill it. * the signal handlers diff --git a/net/ipv4/netfilter/ipt_ECN.c b/net/ipv4/netfilter/ipt_ECN.c index f7e2fa0974dc..16ad251c9725 100644 --- a/net/ipv4/netfilter/ipt_ECN.c +++ b/net/ipv4/netfilter/ipt_ECN.c @@ -50,7 +50,7 @@ set_ect_tcp(struct sk_buff *skb, const struct ipt_ECN_info *einfo) struct tcphdr _tcph, *tcph; __be16 oldval; - /* Not enought header? */ + /* Not enough header? */ tcph = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(_tcph), &_tcph); if (!tcph) return false; diff --git a/net/irda/irlap.c b/net/irda/irlap.c index 356e65b1dc42..783c5f367d29 100644 --- a/net/irda/irlap.c +++ b/net/irda/irlap.c @@ -450,10 +450,10 @@ void irlap_disconnect_request(struct irlap_cb *self) /* Check if we are in the right state for disconnecting */ switch (self->state) { - case LAP_XMIT_P: /* FALLTROUGH */ - case LAP_XMIT_S: /* FALLTROUGH */ - case LAP_CONN: /* FALLTROUGH */ - case LAP_RESET_WAIT: /* FALLTROUGH */ + case LAP_XMIT_P: /* FALLTHROUGH */ + case LAP_XMIT_S: /* FALLTHROUGH */ + case LAP_CONN: /* FALLTHROUGH */ + case LAP_RESET_WAIT: /* FALLTHROUGH */ case LAP_RESET_CHECK: irlap_do_event(self, DISCONNECT_REQUEST, NULL, NULL); break; @@ -485,9 +485,9 @@ void irlap_disconnect_indication(struct irlap_cb *self, LAP_REASON reason) IRDA_DEBUG(1, "%s(), Sending reset request!\n", __func__); irlap_do_event(self, RESET_REQUEST, NULL, NULL); break; - case LAP_NO_RESPONSE: /* FALLTROUGH */ - case LAP_DISC_INDICATION: /* FALLTROUGH */ - case LAP_FOUND_NONE: /* FALLTROUGH */ + case LAP_NO_RESPONSE: /* FALLTHROUGH */ + case LAP_DISC_INDICATION: /* FALLTHROUGH */ + case LAP_FOUND_NONE: /* FALLTHROUGH */ case LAP_MEDIA_BUSY: irlmp_link_disconnect_indication(self->notify.instance, self, reason, NULL); diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c index c5c51959e3ce..94a9884d7146 100644 --- a/net/irda/irlap_event.c +++ b/net/irda/irlap_event.c @@ -1741,7 +1741,7 @@ static int irlap_state_reset(struct irlap_cb *self, IRLAP_EVENT event, * Function irlap_state_xmit_s (event, skb, info) * * XMIT_S, The secondary station has been given the right to transmit, - * and we therefor do not expect to receive any transmissions from other + * and we therefore do not expect to receive any transmissions from other * stations. */ static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event, diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c index 7bf5b913828b..0e7d8bde145d 100644 --- a/net/irda/irlmp.c +++ b/net/irda/irlmp.c @@ -105,7 +105,7 @@ int __init irlmp_init(void) init_timer(&irlmp->discovery_timer); - /* Do discovery every 3 seconds, conditionaly */ + /* Do discovery every 3 seconds, conditionally */ if (sysctl_discovery) irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout*HZ); @@ -1842,7 +1842,7 @@ LM_REASON irlmp_convert_lap_reason( LAP_REASON lap_reason) reason = LM_CONNECT_FAILURE; break; default: - IRDA_DEBUG(1, "%s(), Unknow IrLAP disconnect reason %d!\n", + IRDA_DEBUG(1, "%s(), Unknown IrLAP disconnect reason %d!\n", __func__, lap_reason); reason = LM_LAP_DISCONNECT; break; diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 751c4d0e2b36..719ddbc9e48c 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -244,7 +244,7 @@ struct mesh_path *mesh_path_lookup_by_idx(int idx, struct ieee80211_sub_if_data * @addr: destination address of the path (ETH_ALEN length) * @sdata: local subif * - * Returns: 0 on sucess + * Returns: 0 on success * * State: the initial state of the new path is set to 0 */ @@ -530,7 +530,7 @@ static void mesh_path_node_reclaim(struct rcu_head *rp) * @addr: dst address (ETH_ALEN length) * @sdata: local subif * - * Returns: 0 if succesful + * Returns: 0 if successful */ int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata) { diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c index 7a10bbe02c13..c5d9f97ef217 100644 --- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -682,7 +682,7 @@ struct netlbl_domaddr6_map *netlbl_domhsh_getentry_af6(const char *domain, * buckets and @skip_chain entries. For each entry in the table call * @callback, if @callback returns a negative value stop 'walking' through the * table and return. Updates the values in @skip_bkt and @skip_chain on - * return. Returns zero on succcess, negative values on failure. + * return. Returns zero on success, negative values on failure. * */ int netlbl_domhsh_walk(u32 *skip_bkt, diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 8674d4919556..29d8501bf156 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -719,7 +719,7 @@ static void sctp_cmd_new_state(sctp_cmd_seq_t *cmds, if (sctp_style(sk, TCP)) { /* Change the sk->sk_state of a TCP-style socket that has - * sucessfully completed a connect() call. + * successfully completed a connect() call. */ if (sctp_state(asoc, ESTABLISHED) && sctp_sstate(sk, CLOSED)) sk->sk_state = SCTP_SS_ESTABLISHED; diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c index f11be72a1a80..b15e1ebb2bfa 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c +++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c @@ -54,7 +54,7 @@ * Assumptions: * - head[0] is physically contiguous. * - tail[0] is physically contiguous. - * - pages[] is not physically or virtually contigous and consists of + * - pages[] is not physically or virtually contiguous and consists of * PAGE_SIZE elements. * * Output: diff --git a/net/wimax/op-reset.c b/net/wimax/op-reset.c index ca269178c4d4..35f370091f4f 100644 --- a/net/wimax/op-reset.c +++ b/net/wimax/op-reset.c @@ -62,7 +62,7 @@ * Called when wanting to reset the device for any reason. Device is * taken back to power on status. * - * This call blocks; on succesful return, the device has completed the + * This call blocks; on successful return, the device has completed the * reset process and is ready to operate. */ int wimax_reset(struct wimax_dev *wimax_dev) diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index d82953573588..8413cf38ed27 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -213,7 +213,7 @@ load_config_help[] = N_( "to modify that configuration.\n" "\n" "If you are uncertain, then you have probably never used alternate\n" - "configuration files. You should therefor leave this blank to abort.\n"), + "configuration files. You should therefore leave this blank to abort.\n"), save_config_text[] = N_( "Enter a filename to which this configuration should be saved " "as an alternate. Leave blank to abort."), diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c index e68823741ad5..2534400317c5 100644 --- a/security/selinux/netlabel.c +++ b/security/selinux/netlabel.c @@ -204,7 +204,7 @@ int selinux_netlbl_skbuff_getsid(struct sk_buff *skb, * * Description * Call the NetLabel mechanism to set the label of a packet using @sid. - * Returns zero on auccess, negative values on failure. + * Returns zero on success, negative values on failure. * */ int selinux_netlbl_skbuff_setsid(struct sk_buff *skb, diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index ff17820d35ec..5914eeb0b339 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -741,7 +741,7 @@ int security_bounded_transition(u32 old_sid, u32 new_sid) goto out; } - /* type/domain unchaned */ + /* type/domain unchanged */ if (old_context->type == new_context->type) { rc = 0; goto out; diff --git a/sound/Kconfig b/sound/Kconfig index 4b5365ad6b46..fcad760f5691 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -55,7 +55,7 @@ config SOUND_OSS_CORE_PRECLAIM Please read Documentation/feature-removal-schedule.txt for details. - If unusre, say Y. + If unsure, say Y. source "sound/oss/dmasound/Kconfig" diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index a076a6ce8071..a828baaab636 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -177,7 +177,7 @@ static struct pnp_card_device_id snd_cs423x_pnpids[] = { { .id = "CSC0437", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } }, /* Digital PC 5000 Onboard - CS4236B */ { .id = "CSC0735", .devs = { { "CSC0000" }, { "CSC0010" } } }, - /* some uknown CS4236B */ + /* some unknown CS4236B */ { .id = "CSC0b35", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } }, /* Intel PR440FX Onboard sound */ { .id = "CSC0b36", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } }, diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c index 02e30d7c6a93..ddad60ef3f37 100644 --- a/sound/isa/opti9xx/miro.c +++ b/sound/isa/opti9xx/miro.c @@ -137,7 +137,7 @@ struct snd_miro { static void snd_miro_proc_init(struct snd_miro * miro); static char * snd_opti9xx_names[] = { - "unkown", + "unknown", "82C928", "82C929", "82C924", "82C925", "82C930", "82C931", "82C933" diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 5cd555325b9d..848007508ffd 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -185,7 +185,7 @@ MODULE_DEVICE_TABLE(pnp_card, snd_opti9xx_pnpids); #endif static char * snd_opti9xx_names[] = { - "unkown", + "unknown", "82C928", "82C929", "82C924", "82C925", "82C930", "82C931", "82C933" diff --git a/sound/oss/dmasound/dmasound_paula.c b/sound/oss/dmasound/dmasound_paula.c index 06e9e88e4c05..bb14e4c67e89 100644 --- a/sound/oss/dmasound/dmasound_paula.c +++ b/sound/oss/dmasound/dmasound_paula.c @@ -657,7 +657,7 @@ static int AmiStateInfo(char *buffer, size_t space) len += sprintf(buffer+len, "\tsound.volume_right = %d [0...64]\n", dmasound.volume_right); if (len >= space) { - printk(KERN_ERR "dmasound_paula: overlowed state buffer alloc.\n") ; + printk(KERN_ERR "dmasound_paula: overflowed state buffer alloc.\n") ; len = space ; } return len; diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c index c62b7d10ec61..8d13092300da 100644 --- a/sound/pci/ca0106/ca0106_proc.c +++ b/sound/pci/ca0106/ca0106_proc.c @@ -233,7 +233,7 @@ static void snd_ca0106_proc_dump_iec958( struct snd_info_buffer *buffer, u32 val snd_iprintf(buffer, "user-defined\n"); break; default: - snd_iprintf(buffer, "unkown\n"); + snd_iprintf(buffer, "unknown\n"); break; } snd_iprintf(buffer, "Sample Bits: "); diff --git a/sound/pci/cs46xx/imgs/cwcdma.asp b/sound/pci/cs46xx/imgs/cwcdma.asp index 09d24c76f034..a65e1193c89a 100644 --- a/sound/pci/cs46xx/imgs/cwcdma.asp +++ b/sound/pci/cs46xx/imgs/cwcdma.asp @@ -26,10 +26,11 @@ // // // The purpose of this code is very simple: make it possible to tranfser -// the samples 'as they are' with no alteration from a PCMreader SCB (DMA from host) -// to any other SCB. This is useful for AC3 throug SPDIF. SRC (source rate converters) -// task always alters the samples in some how, however it's from 48khz -> 48khz. The -// alterations are not audible, but AC3 wont work. +// the samples 'as they are' with no alteration from a PCMreader +// SCB (DMA from host) to any other SCB. This is useful for AC3 through SPDIF. +// SRC (source rate converters) task always alters the samples in somehow, +// however it's from 48khz -> 48khz. +// The alterations are not audible, but AC3 wont work. // // ... // | diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index 36e08bd2b3cc..360e3809a60b 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -184,7 +184,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard."); * The hardware has 3 channels for playback and 1 for capture. * - channel 0 is the front channel * - channel 1 is the rear channel - * - channel 2 is the center/lfe chanel + * - channel 2 is the center/lfe channel * Volume is controlled by the AC97 for the front and rear channels by * the PCM Playback Volume, Sigmatel Surround Playback Volume and * Surround Playback Volume. The Sigmatel 4-Speaker Stereo switch affects diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index 780e1a72114a..8917071d5b6a 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -66,7 +66,7 @@ struct cmi_spec { struct hda_pcm pcm_rec[2]; /* PCM information */ - /* pin deafault configuration */ + /* pin default configuration */ hda_nid_t pin_nid[NUM_PINS]; unsigned int def_conf[NUM_PINS]; unsigned int pin_def_confs; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ff20048504b6..872731eb49e8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6619,7 +6619,7 @@ static struct hda_input_mux alc889A_mb31_capture_source = { /* Front Mic (0x01) unused */ { "Line", 0x2 }, /* Line 2 (0x03) unused */ - /* CD (0x04) unsused? */ + /* CD (0x04) unused? */ }, }; diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 0dce331a2a3b..a1b10d1a384d 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -3017,7 +3017,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry, insel = "Coaxial"; break; default: - insel = "Unkown"; + insel = "Unknown"; } switch (hdspm->control_register & HDSPM_SyncRefMask) { @@ -3028,7 +3028,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry, syncref = "MADI"; break; default: - syncref = "Unkown"; + syncref = "Unknown"; } snd_iprintf(buffer, "Inputsel = %s, SyncRef = %s\n", insel, syncref); diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c index c33b92edbded..8ce1c9b2e5b8 100644 --- a/sound/soc/codecs/uda134x.c +++ b/sound/soc/codecs/uda134x.c @@ -101,7 +101,7 @@ static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg, pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value); if (reg >= UDA134X_REGS_NUM) { - printk(KERN_ERR "%s unkown register: reg: %u", + printk(KERN_ERR "%s unknown register: reg: %u", __func__, reg); return -EINVAL; } @@ -552,7 +552,7 @@ static int uda134x_soc_probe(struct platform_device *pdev) ARRAY_SIZE(uda1341_snd_controls)); break; default: - printk(KERN_ERR "%s unkown codec type: %d", + printk(KERN_ERR "%s unknown codec type: %d", __func__, pd->model); return -EINVAL; } diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index fe1307b500cf..d72347d90b70 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -607,7 +607,7 @@ SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1, SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0), SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0), SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1), -SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8903_DRC_3, 5, 124, 1, +SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1, drc_tlv_thresh), SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp), SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min), @@ -617,11 +617,11 @@ SOC_ENUM("DRC Decay Rate", drc_decay), SOC_ENUM("DRC FF Delay", drc_ff_delay), SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0), SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0), -SOC_SINGLE_TLV("DRC QR Threashold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max), +SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max), SOC_ENUM("DRC QR Decay Rate", drc_qr_decay), SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0), SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0), -SOC_ENUM("DRC Smoothing Threashold", drc_smoothing), +SOC_ENUM("DRC Smoothing Threshold", drc_smoothing), SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup), SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index d9987999e92c..bc033687b220 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -689,7 +689,7 @@ SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE, SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0), SOC_ENUM("DRC Path", drc_path), -SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8993_DRC_CONTROL_2, +SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2, 2, 60, 1, drc_comp_threash), SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3, 11, 30, 1, drc_comp_amp), @@ -709,7 +709,7 @@ SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0, SOC_ENUM("DRC Quick Release Rate", drc_qr_rate), SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0), SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0), -SOC_ENUM("DRC Smoothing Hysteresis Threashold", drc_smooth), +SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth), SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0, drc_startup_tlv), diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c index 1966e0d5652d..3c7ccb78b6ab 100644 --- a/sound/soc/s3c24xx/s3c24xx_simtec.c +++ b/sound/soc/s3c24xx/s3c24xx_simtec.c @@ -270,7 +270,7 @@ static int attach_gpio_amp(struct device *dev, gpio_direction_output(pd->amp_gain[1], 0); } - /* note, curently we assume GPA0 isn't valid amp */ + /* note, currently we assume GPA0 isn't valid amp */ if (pdata->amp_gpio > 0) { ret = gpio_request(pd->amp_gpio, "gpio-amp"); if (ret) { diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c index 83b8028e209d..81d6f983f51e 100644 --- a/sound/soc/s6000/s6000-pcm.c +++ b/sound/soc/s6000/s6000-pcm.c @@ -196,7 +196,7 @@ static int s6000_pcm_start(struct snd_pcm_substream *substream) 0 /* destination skip after chunk (impossible) */, 4 /* 16 byte burst size */, -1 /* don't conserve bandwidth */, - 0 /* low watermark irq descriptor theshold */, + 0 /* low watermark irq descriptor threshold */, 0 /* disable hardware timestamps */, 1 /* enable channel */); diff --git a/sound/sound_core.c b/sound/sound_core.c index 49c998186592..dbca7c909a31 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -353,7 +353,7 @@ static struct sound_unit *chains[SOUND_STEP]; * @dev: device pointer * * Allocate a special sound device by minor number from the sound - * subsystem. The allocated number is returned on succes. On failure + * subsystem. The allocated number is returned on success. On failure * a negative error code is returned. */ -- cgit v1.2.3