From d3c1a297b6fe60fe7be637cb067b27fca46be504 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 24 Feb 2017 10:42:14 +0200 Subject: Documentation: Update path to sysrq.txt Commit 9d85025b0418 ("docs-rst: create an user's manual book") moved the sysrq.txt leaving old paths in the kernel docs. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Corbet --- Documentation/media/v4l-drivers/bttv.rst | 2 +- Documentation/s390/Debugging390.txt | 2 +- Documentation/sysctl/kernel.txt | 2 +- Documentation/virtual/uml/UserModeLinux-HOWTO.txt | 6 +++--- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst index bc63b12efafd..195ccaac2816 100644 --- a/Documentation/media/v4l-drivers/bttv.rst +++ b/Documentation/media/v4l-drivers/bttv.rst @@ -312,7 +312,7 @@ information out of a register+stack dump printed by the kernel on protection faults (so-called "kernel oops"). If you run into some kind of deadlock, you can try to dump a call trace -for each process using sysrq-t (see Documentation/sysrq.txt). +for each process using sysrq-t (see Documentation/admin-guide/sysrq.rst). This way it is possible to figure where *exactly* some process in "D" state is stuck. diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index 3df8babcdc41..5ae7f868a007 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -2116,7 +2116,7 @@ The sysrq key reading is very picky ( I have to type the keys in an This is particularly useful for syncing disks unmounting & rebooting if the machine gets partially hung. -Read Documentation/sysrq.txt for more info +Read Documentation/admin-guide/sysrq.rst for more info References: =========== diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index a32b4b748644..bac23c198360 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -85,7 +85,7 @@ show up in /proc/sys/kernel: - softlockup_all_cpu_backtrace - soft_watchdog - stop-a [ SPARC only ] -- sysrq ==> Documentation/sysrq.txt +- sysrq ==> Documentation/admin-guide/sysrq.rst - sysctl_writes_strict - tainted - threads-max diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt index f4099ca6b483..87b80f589e1c 100644 --- a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt +++ b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt @@ -2401,9 +2401,9 @@ This takes one argument, which is a single letter. It calls the generic kernel's SysRq driver, which does whatever is called for by - that argument. See the SysRq documentation in Documentation/sysrq.txt - in your favorite kernel tree to see what letters are valid and what - they do. + that argument. See the SysRq documentation in + Documentation/admin-guide/sysrq.rst in your favorite kernel tree to + see what letters are valid and what they do. -- cgit v1.2.3 From 2eb6a4b26d13c51bdb8d5aefdfc846c0624b8ce4 Mon Sep 17 00:00:00 2001 From: Cao jin Date: Wed, 1 Mar 2017 17:05:28 +0800 Subject: pcieaer doc: update the link The original link is empty, replace it. Signed-off-by: Cao jin Signed-off-by: Jonathan Corbet --- Documentation/PCI/pcieaer-howto.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt index ea8cafba255c..acd0dddd6bb8 100644 --- a/Documentation/PCI/pcieaer-howto.txt +++ b/Documentation/PCI/pcieaer-howto.txt @@ -256,7 +256,7 @@ After reboot with new kernel or insert the module, a device file named Then, you need a user space tool named aer-inject, which can be gotten from: - http://www.kernel.org/pub/linux/utils/pci/aer-inject/ + https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/ More information about aer-inject can be found in the document comes with its source code. -- cgit v1.2.3 From 9857b1ad4740ec2429e8ec0a39946d45a8d2cff9 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Fri, 3 Mar 2017 15:44:02 +0900 Subject: doc/ko_KR/memory-barriers: Update control-dependencies section This commit applies upstream change, commit c8241f8553e8 ("doc: Update control-dependencies section of memory-barriers.txt"), to Korean translation. Signed-off-by: SeongJae Park Signed-off-by: Jonathan Corbet --- .../translations/ko_KR/memory-barriers.txt | 68 ++++++++++++---------- 1 file changed, 37 insertions(+), 31 deletions(-) diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index a3228a676cc1..ce0b48d69eaa 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -662,6 +662,10 @@ include/linux/rcupdate.h 의 rcu_assign_pointer() 와 rcu_dereference() 를 컨트롤 의존성 ------------- +현재의 컴파일러들은 컨트롤 의존성을 이해하고 있지 않기 때문에 컨트롤 의존성은 +약간 다루기 어려울 수 있습니다. 이 섹션의 목적은 여러분이 컴파일러의 무시로 +인해 여러분의 코드가 망가지는 걸 막을 수 있도록 돕는겁니다. + 로드-로드 컨트롤 의존성은 데이터 의존성 배리어만으로는 정확히 동작할 수가 없어서 읽기 메모리 배리어를 필요로 합니다. 아래의 코드를 봅시다: @@ -689,20 +693,21 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); if (q) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); } 컨트롤 의존성은 보통 다른 타입의 배리어들과 짝을 맞춰 사용됩니다. 그렇다곤 -하나, READ_ONCE() 는 반드시 사용해야 함을 부디 명심하세요! READ_ONCE() 가 -없다면, 컴파일러가 'a' 로부터의 로드를 'a' 로부터의 또다른 로드와, 'b' 로의 -스토어를 'b' 로의 또다른 스토어와 조합해 버려 매우 비직관적인 결과를 초래할 수 -있습니다. +하나, READ_ONCE() 도 WRITE_ONCE() 도 선택사항이 아니라 필수사항임을 부디 +명심하세요! READ_ONCE() 가 없다면, 컴파일러는 'a' 로부터의 로드를 'a' 로부터의 +또다른 로드와 조합할 수 있습니다. WRITE_ONCE() 가 없다면, 컴파일러는 'b' 로의 +스토어를 'b' 로의 또라느 스토어들과 조합할 수 있습니다. 두 경우 모두 순서에 +있어 상당히 비직관적인 결과를 초래할 수 있습니다. 이걸로 끝이 아닌게, 컴파일러가 변수 'a' 의 값이 항상 0이 아니라고 증명할 수 있다면, 앞의 예에서 "if" 문을 없애서 다음과 같이 최적화 할 수도 있습니다: q = a; - b = p; /* BUG: Compiler and CPU can both reorder!!! */ + b = 1; /* BUG: Compiler and CPU can both reorder!!! */ 그러니 READ_ONCE() 를 반드시 사용하세요. @@ -712,11 +717,11 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); if (q) { barrier(); - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { barrier(); - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something_else(); } @@ -725,12 +730,12 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); barrier(); - WRITE_ONCE(b, p); /* BUG: No ordering vs. load from a!!! */ + WRITE_ONCE(b, 1); /* BUG: No ordering vs. load from a!!! */ if (q) { - /* WRITE_ONCE(b, p); -- moved up, BUG!!! */ + /* WRITE_ONCE(b, 1); -- moved up, BUG!!! */ do_something(); } else { - /* WRITE_ONCE(b, p); -- moved up, BUG!!! */ + /* WRITE_ONCE(b, 1); -- moved up, BUG!!! */ do_something_else(); } @@ -742,10 +747,10 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); if (q) { - smp_store_release(&b, p); + smp_store_release(&b, 1); do_something(); } else { - smp_store_release(&b, p); + smp_store_release(&b, 1); do_something_else(); } @@ -754,10 +759,10 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); if (q) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); do_something_else(); } @@ -770,10 +775,10 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); if (q % MAX) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); do_something_else(); } @@ -781,7 +786,7 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 위의 코드를 아래와 같이 바꿔버릴 수 있습니다: q = READ_ONCE(a); - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something_else(); 이렇게 되면, CPU 는 변수 'a' 로부터의 로드와 변수 'b' 로의 스토어 사이의 순서를 @@ -793,10 +798,10 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */ if (q % MAX) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); do_something(); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); do_something_else(); } @@ -828,35 +833,33 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 q = READ_ONCE(a); if (q) { - WRITE_ONCE(b, p); + WRITE_ONCE(b, 1); } else { - WRITE_ONCE(b, r); + WRITE_ONCE(b, 2); } - WRITE_ONCE(c, 1); /* BUG: No ordering against the read from "a". */ + WRITE_ONCE(c, 1); /* BUG: No ordering against the read from 'a'. */ -컴파일러는 volatile 타입에 대한 액세스를 재배치 할 수 없고 이 조건 하의 "b" +컴파일러는 volatile 타입에 대한 액세스를 재배치 할 수 없고 이 조건 하의 'b' 로의 쓰기를 재배치 할 수 없기 때문에 여기에 순서 규칙이 존재한다고 주장하고 싶을 겁니다. 불행히도 이 경우에, 컴파일러는 다음의 가상의 pseudo-assembly 언어 -코드처럼 "b" 로의 두개의 쓰기 오퍼레이션을 conditional-move 인스트럭션으로 +코드처럼 'b' 로의 두개의 쓰기 오퍼레이션을 conditional-move 인스트럭션으로 번역할 수 있습니다: ld r1,a - ld r2,p - ld r3,r cmp r1,$0 - cmov,ne r4,r2 - cmov,eq r4,r3 + cmov,ne r4,$1 + cmov,eq r4,$2 st r4,b st $1,c -완화된 순서 규칙의 CPU 는 "a" 로부터의 로드와 "c" 로의 스토어 사이에 어떤 +완화된 순서 규칙의 CPU 는 'a' 로부터의 로드와 'c' 로의 스토어 사이에 어떤 종류의 의존성도 갖지 않을 겁니다. 이 컨트롤 의존성은 두개의 cmov 인스트럭션과 거기에 의존하는 스토어 에게만 적용될 겁니다. 짧게 말하자면, 컨트롤 의존성은 주어진 if 문의 then 절과 else 절에게만 (그리고 이 두 절 내에서 호출되는 함수들에게까지) 적용되지, 이 if 문을 뒤따르는 코드에는 적용되지 않습니다. 마지막으로, 컨트롤 의존성은 이행성 (transitivity) 을 제공하지 -않습니다-. 이건 -x 와 y 가 둘 다 0 이라는 초기값을 가졌다는 가정 하의 두개의 예제로 +'x' 와 'y' 가 둘 다 0 이라는 초기값을 가졌다는 가정 하의 두개의 예제로 보이겠습니다: CPU 0 CPU 1 @@ -924,6 +927,9 @@ http://www.cl.cam.ac.uk/users/pes20/ppc-supplemental/test6.pdf 와 (*) 컨트롤 의존성은 이행성을 제공하지 -않습니다-. 이행성이 필요하다면, smp_mb() 를 사용하세요. + (*) 컴파일러는 컨트롤 의존성을 이해하고 있지 않습니다. 따라서 컴파일러가 + 여러분의 코드를 망가뜨리지 않도록 하는건 여러분이 해야 하는 일입니다. + SMP 배리어 짝맞추기 -------------------- -- cgit v1.2.3 From f3fc83e55533b9fddac1d4eda79956768df569ea Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Fri, 3 Mar 2017 22:43:30 +0000 Subject: docs: Fix htmldocs build failure Build of HTML docs failing due to conversion of deviceiobook.tmpl in 8a8a602f and regulator.tmpl in 028f2533 to RST without removing from DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the following error: make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'. Stop. Makefile:1452: recipe for target 'htmldocs' failed make: *** [htmldocs] Error 2 Update DOCBOOKS to reflect available books. Signed-off-by: Martyn Welch Signed-off-by: Jonathan Corbet --- Documentation/DocBook/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 7b8831fb4e37..c339cf59ad69 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -7,12 +7,12 @@ # list of DOCBOOKS. DOCBOOKS := z8530book.xml \ - kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ + kernel-hacking.xml kernel-locking.xml \ writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - sh.xml regulator.xml w1.xml \ + sh.xml w1.xml \ writing_musb_glue_layer.xml ifeq ($(DOCBOOKS),) -- cgit v1.2.3 From fd5d666932d51b2552ecc0280047d6b35d9b6cd1 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Fri, 3 Mar 2017 12:24:05 +0000 Subject: Documentation/sphinx: fix primary_domain configuration With Sphinx 1.5.3 I get the warning: WARNING: primary_domain 'C' not found, ignored. It seems that domain names in Sphinx are case-sensitive and for the C domain the name must be lower case. Signed-off-by: John Keeping Signed-off-by: Jonathan Corbet --- Documentation/conf.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/conf.py b/Documentation/conf.py index f6823cf01275..7fadb3b83293 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -135,7 +135,7 @@ pygments_style = 'sphinx' # If true, `todo` and `todoList` produce output, else they produce nothing. todo_include_todos = False -primary_domain = 'C' +primary_domain = 'c' highlight_language = 'none' # -- Options for HTML output ---------------------------------------------- -- cgit v1.2.3