From a16fffdd8eb95ebab7dc22414896fe6493951e0e Mon Sep 17 00:00:00 2001 From: Jonas Larsson Date: Fri, 27 Mar 2009 10:18:14 +0100 Subject: Add Merisc board support Merisc is the family name for a range of AVR32-based boards. The boards are designed to be used in a man-machine interfacing environment, utilizing a touch-based graphical user interface. They host a vast range of I/O peripherals as well as a large SDRAM & Flash memory bank. For more information see: http://www.martinsson.se/merisc Signed-off-by: Jonas Larsson Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/merisc/setup.c | 289 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 289 insertions(+) create mode 100644 arch/avr32/boards/merisc/setup.c (limited to 'arch/avr32/boards/merisc/setup.c') diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c new file mode 100644 index 000000000000..2dbca46337af --- /dev/null +++ b/arch/avr32/boards/merisc/setup.c @@ -0,0 +1,289 @@ +/* + * Board-specific setup code for the Merisc + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "merisc.h" + +/* Holds the autodetected board model and revision */ +static int merisc_board_id; + +/* Initialized by bootloader-specific startup code. */ +struct tag *bootloader_tags __initdata; + +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + +struct eth_addr { + u8 addr[6]; +}; + +static struct eth_addr __initdata hw_addr[2]; +static struct eth_platform_data __initdata eth_data[2]; + +static int ads7846_get_pendown_state_PB26(void) +{ + return !gpio_get_value(GPIO_PIN_PB(26)); +} + +static int ads7846_get_pendown_state_PB28(void) +{ + return !gpio_get_value(GPIO_PIN_PB(28)); +} + +static struct ads7846_platform_data __initdata ads7846_data = { + .model = 7846, + .vref_delay_usecs = 100, + .vref_mv = 0, + .keep_vref_on = 0, + .settle_delay_usecs = 150, + .penirq_recheck_delay_usecs = 1, + .x_plate_ohms = 800, + .debounce_rep = 4, + .debounce_max = 10, + .debounce_tol = 50, + .get_pendown_state = ads7846_get_pendown_state_PB26, + .filter_init = NULL, + .filter = NULL, + .filter_cleanup = NULL, +}; + +static struct spi_board_info __initdata spi0_board_info[] = { + { + .modalias = "ads7846", + .max_speed_hz = 3250000, + .chip_select = 0, + .bus_num = 0, + .platform_data = &ads7846_data, + .mode = SPI_MODE_0, + }, +}; + +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = GPIO_PIN_PE(19), + .wp_pin = GPIO_PIN_PE(20), + }, +}; + +static int __init parse_tag_ethernet(struct tag *tag) +{ + int i; + + i = tag->u.ethernet.mac_index; + if (i < ARRAY_SIZE(hw_addr)) { + memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, + sizeof(hw_addr[i].addr)); + } + + return 0; +} +__tagtable(ATAG_ETHERNET, parse_tag_ethernet); + +static void __init set_hw_addr(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + const u8 *addr; + void __iomem *regs; + struct clk *pclk; + + if (!res) + return; + + if (pdev->id >= ARRAY_SIZE(hw_addr)) + return; + + addr = hw_addr[pdev->id].addr; + if (!is_valid_ether_addr(addr)) + return; + + regs = (void __iomem __force *)res->start; + pclk = clk_get(&pdev->dev, "pclk"); + if (!pclk) + return; + + clk_enable(pclk); + __raw_writel((addr[3] << 24) | (addr[2] << 16) + | (addr[1] << 8) | addr[0], regs + 0x98); + __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); + clk_disable(pclk); + clk_put(pclk); +} + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PIN_PA(6), + .scl_pin = GPIO_PIN_PA(7), + .sda_is_open_drain = 1, + .scl_is_open_drain = 1, + .udelay = 2, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; + +#ifdef CONFIG_LEDS_ATMEL_PWM +static struct gpio_led stk_pwm_led[] = { + { + .name = "backlight", + .gpio = 0, /* PWM channel 0 (LCD backlight) */ + }, +}; + +static struct gpio_led_platform_data stk_pwm_led_data = { + .num_leds = ARRAY_SIZE(stk_pwm_led), + .leds = stk_pwm_led, +}; + +static struct platform_device stk_pwm_led_dev = { + .name = "leds-atmel-pwm", + .id = -1, + .dev = { + .platform_data = &stk_pwm_led_data, + }, +}; +#endif + +const char *merisc_model(void) +{ + switch (merisc_board_id) { + case 0: + case 1: + return "500-01"; + case 2: + return "BT"; + default: + return "Unknown"; + } +} + +const char *merisc_revision(void) +{ + switch (merisc_board_id) { + case 0: + return "B"; + case 1: + return "D"; + case 2: + return "A"; + default: + return "Unknown"; + } +} + +static void detect_merisc_board_id(void) +{ + /* Board ID pins MUST be set as input or the board may be damaged */ + at32_select_gpio(GPIO_PIN_PA(24), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(25), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(26), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(27), AT32_GPIOF_PULLUP); + + merisc_board_id = !gpio_get_value(GPIO_PIN_PA(24)) + + !gpio_get_value(GPIO_PIN_PA(25)) * 2 + + !gpio_get_value(GPIO_PIN_PA(26)) * 4 + + !gpio_get_value(GPIO_PIN_PA(27)) * 8; +} + +void __init setup_board(void) +{ + at32_map_usart(0, 0); + at32_map_usart(1, 1); + at32_map_usart(3, 3); + at32_setup_serial_console(1); +} + +static int __init merisc_init(void) +{ + detect_merisc_board_id(); + + printk(KERN_NOTICE "BOARD: Merisc %s revision %s\n", merisc_model(), + merisc_revision()); + + /* Reserve pins for SDRAM */ + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26)); + + if (merisc_board_id >= 1) + at32_map_usart(2, 2); + + at32_add_device_usart(0); + at32_add_device_usart(1); + if (merisc_board_id >= 1) + at32_add_device_usart(2); + at32_add_device_usart(3); + set_hw_addr(at32_add_device_eth(0, ð_data[0])); + + /* ADS7846 PENIRQ */ + if (merisc_board_id == 0) { + ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB26; + at32_select_periph(GPIO_PIOB_BASE, 1 << 26, + GPIO_PERIPH_A, AT32_GPIOF_PULLUP); + spi0_board_info[0].irq = AT32_EXTINT(1); + } else { + ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB28; + at32_select_periph(GPIO_PIOB_BASE, 1 << 28, GPIO_PERIPH_A, + AT32_GPIOF_PULLUP); + spi0_board_info[0].irq = AT32_EXTINT(3); + } + + /* ADS7846 busy pin */ + at32_select_gpio(GPIO_PIN_PA(4), AT32_GPIOF_PULLUP); + + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); + + at32_add_device_mci(0, &mci0_data); + +#ifdef CONFIG_LEDS_ATMEL_PWM + at32_add_device_pwm((1 << 0) | (1 << 2)); + platform_device_register(&stk_pwm_led_dev); +#else + at32_add_device_pwm((1 << 2)); +#endif + + at32_select_gpio(i2c_gpio_data.sda_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(i2c_gpio_data.scl_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + platform_device_register(&i2c_gpio_device); + + return 0; +} +postcore_initcall(merisc_init); -- cgit v1.2.3