From 7e6a69ee954caf8dd8c98f70c8ee894c8ebfdcf0 Mon Sep 17 00:00:00 2001 From: Mike Leach Date: Fri, 17 Feb 2017 19:13:10 +0000 Subject: arm64: dts: juno: update definition for programmable replicator Juno platforms have a programmable replicator splitting the trace output to TPIU and ETR. Currently this is not being programmed as it is being treated as a none-programmable replicator - which is the default operational mode for these devices. The TPIU in the system is enabled by default, and this combination is causing back-pressure in the trace system resulting in overflows at the source. Replaces the existing definition with one that defines the programmable replicator, using the "qcom,coresight-replicator1x" driver that provides the correct functionality for CoreSight programmable replicators. Reviewed-and-Tested-by: Mathieu Poirier Signed-off-by: Mike Leach Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/juno-base.dtsi | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 9d799d938d2f..df539e865b90 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -372,12 +372,13 @@ }; }; - coresight-replicator { - /* - * Non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-replicator"; + replicator@20120000 { + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; -- cgit v1.2.3