From 98d4f93c79b002f85480320fe63fefaa31d58b6c Mon Sep 17 00:00:00 2001 From: Jens Frederich Date: Thu, 15 Aug 2013 21:34:55 +0200 Subject: Staging: olpc_dcon: replace some magic numbers This patch replace some magic numbers. I believe it makes the driver more readable. The magic number 0x26 is the XO system embedded controller (EC) command 'DCON power enable/disable'. Number 0x41, and 0x42 are special memory controller settings register. The 0x41 initialize bit sequence 0x101 means: enable memory power down function and special SDRAM clock delay for synchronize SDRAM output and clock signal. The 0x42 initialize squence 0x101 is wrong. According to the specification Bit 8 is reserved, thus not in use. I removed it. Signed-off-by: Jens Frederich Signed-off-by: Greg Kroah-Hartman --- drivers/staging/olpc_dcon/olpc_dcon.c | 13 +++++++------ drivers/staging/olpc_dcon/olpc_dcon.h | 27 ++++++++++++++++++--------- 2 files changed, 25 insertions(+), 15 deletions(-) (limited to 'drivers/staging/olpc_dcon') diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 7c460f2c0d23..5ca4fa4fd246 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -90,9 +90,10 @@ static int dcon_hw_init(struct dcon_priv *dcon, int is_init) /* SDRAM setup/hold time */ dcon_write(dcon, 0x3a, 0xc040); - dcon_write(dcon, 0x41, 0x0000); - dcon_write(dcon, 0x41, 0x0101); - dcon_write(dcon, 0x42, 0x0101); + dcon_write(dcon, DCON_REG_MEM_OPT_A, 0x0000); /* clear option bits */ + dcon_write(dcon, DCON_REG_MEM_OPT_A, + MEM_DLL_CLOCK_DELAY | MEM_POWER_DOWN); + dcon_write(dcon, DCON_REG_MEM_OPT_B, MEM_SOFT_RESET); /* Colour swizzle, AA, no passthrough, backlight */ if (is_init) { @@ -126,7 +127,7 @@ static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down) power_up: if (is_powered_down) { x = 1; - x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); if (x) { pr_warn("unable to force dcon to power up: %d!\n", x); return x; @@ -144,7 +145,7 @@ power_up: pr_err("unable to stabilize dcon's smbus, reasserting power and praying.\n"); BUG_ON(olpc_board_at_least(olpc_board(0xc2))); x = 0; - olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); msleep(100); is_powered_down = 1; goto power_up; /* argh, stupid hardware.. */ @@ -208,7 +209,7 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep) if (sleep) { x = 0; - x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); if (x) pr_warn("unable to force dcon to power down: %d!\n", x); else diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h index 997bded2949f..524ee49fbacb 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.h +++ b/drivers/staging/olpc_dcon/olpc_dcon.h @@ -22,15 +22,24 @@ #define MODE_DEBUG (1<<14) #define MODE_SELFTEST (1<<15) -#define DCON_REG_HRES 2 -#define DCON_REG_HTOTAL 3 -#define DCON_REG_HSYNC_WIDTH 4 -#define DCON_REG_VRES 5 -#define DCON_REG_VTOTAL 6 -#define DCON_REG_VSYNC_WIDTH 7 -#define DCON_REG_TIMEOUT 8 -#define DCON_REG_SCAN_INT 9 -#define DCON_REG_BRIGHT 10 +#define DCON_REG_HRES 0x2 +#define DCON_REG_HTOTAL 0x3 +#define DCON_REG_HSYNC_WIDTH 0x4 +#define DCON_REG_VRES 0x5 +#define DCON_REG_VTOTAL 0x6 +#define DCON_REG_VSYNC_WIDTH 0x7 +#define DCON_REG_TIMEOUT 0x8 +#define DCON_REG_SCAN_INT 0x9 +#define DCON_REG_BRIGHT 0x10 +#define DCON_REG_MEM_OPT_A 0x41 +#define DCON_REG_MEM_OPT_B 0x42 + +/* Load Delay Locked Loop (DLL) settings for clock delay */ +#define MEM_DLL_CLOCK_DELAY (1<<0) +/* Memory controller power down function */ +#define MEM_POWER_DOWN (1<<8) +/* Memory controller software reset */ +#define MEM_SOFT_RESET (1<<0) /* Status values */ -- cgit v1.2.3