openocd: new package for openocd-0.8.0

Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
[mol: cleanup]
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>

5 files changed, 345 insertions, 0 deletions

diff --git a/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
new file mode 100644
index 000000000..a7c65b740
--- /dev/null
+++ b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
@@ -0,0 +1,33 @@
+From 930e41a2921b8c2905690153514099c8abf05828 Mon Sep 17 00:00:00 2001
+From: Paul Fertser <fercerpav@gmail.com>
+Date: Sat, 31 May 2014 08:19:51 +0400
+Subject: [PATCH] configure.ac: correct test for USB_BLASTER_DRIVER AM symbol
+
+Blaster II should depend on the corresponding symbol, not on libusb-1
+presence.
+
+Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece
+Signed-off-by: Paul Fertser <fercerpav@gmail.com>
+Reviewed-on: http://openocd.zylin.com/2159
+Tested-by: jenkins
+Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index 1b4870e..9943beb 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1174,7 +1174,7 @@ AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft223
+ AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
+ AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
+ AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
+-AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $use_libusb1 = yes])
++AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no])
+ AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
+ AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
+ AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
+-- 
+2.1.0
+
diff --git a/patches/openocd-0.8.0/autogen.sh b/patches/openocd-0.8.0/autogen.sh
new file mode 120000
index 000000000..9f8a4cb7d
--- /dev/null
+++ b/patches/openocd-0.8.0/autogen.sh
@@ -0,0 +1 @@
+../autogen.sh
\ No newline at end of file
diff --git a/patches/openocd-0.8.0/series b/patches/openocd-0.8.0/series
new file mode 100644
index 000000000..23230ef4b
--- /dev/null
+++ b/patches/openocd-0.8.0/series
@@ -0,0 +1 @@
+0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
diff --git a/rules/openocd.in b/rules/openocd.in
new file mode 100644
index 000000000..d8fc4004d
--- /dev/null
+++ b/rules/openocd.in
@@ -0,0 +1,219 @@
+## SECTION=debug_tools
+
+menuconfig OPENOCD
+	tristate
+	prompt "OpenOCD                       "
+
+	# libusb-1.x
+	select LIBUSB		if OPENOCD_FTDI || OPENOCD_STLINK || OPENOCD_TI_ICDI || OPENOCD_ULINK || OPENOCD_USB_BLASTER_2
+	# libusb-1.x or libusb-0.1
+	select LIBUSB		if OPENOCD_JLINK || OPENOCD_OSBDM || OPENOCD_OPENDOUS || OPENOCD_AICE
+	# libusb-0.1
+	select LIBUSB_COMPAT	if OPENOCD_VSLLINK || OPENOCD_USBPROG || OPENOCD_RLINK || OPENOCD_ARMJTAGEW
+	select LIBFTDI1		if OPENOCD_USB_BLASTER_LIBFTDI || OPENOCD_PRESTO_LIBFTDI || OPENOCD_OPENJTAG_FTDI
+
+	help
+	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
+	  programming and boundary-scan testing for embedded target devices.
+	  It supports JTAG and SWD (direct or via dongle) to access targets.
+	  Flash writing is supported for various internal and external types.
+	  It is controlled with TCL scripts and can act as gdbserver.
+
+if OPENOCD
+
+# ===== scripts directory =====
+
+config OPENOCD_SCRIPTDIR
+	string
+	default "/usr/share/openocd/scripts/"
+	prompt "OpenOCD script tree"
+	help
+	  OpenOCD relies on TCL scripts for core and SoC specific configs and
+	  setups, interface (debug adapter) specific configs, RAM and flash
+	  layout definitions, board init routines, helper routines, and so on.
+
+	  Keeping the default option of "/usr/share/openocd/scripts/" will
+	  install all of them (several 100kB) to the target, which is probably
+	  not what you want, as they are heavily target dependent.
+
+	  To install only a few required ones, create a tree in projectroot
+	  named like the tree configured, so only these will be installed.
+
+	  Clear this config option to omit script installation at all.
+
+
+# ===== interface drivers =====
+
+config OPENOCD_DUMMY
+	bool
+	prompt "dummy port driver"
+
+# --- libusb-1.x based
+
+config OPENOCD_FTDI
+	bool
+	prompt "MPSSE mode of FTDI based devices"
+
+config OPENOCD_STLINK
+	bool
+	prompt "ST-Link JTAG Programmer"
+
+config OPENOCD_TI_ICDI
+	bool
+	prompt "TI ICDI JTAG Programmer"
+
+config OPENOCD_ULINK
+	bool
+	prompt "Keil ULINK JTAG Programmer"
+
+config OPENOCD_USB_BLASTER_2
+	bool
+	prompt "Altera USB-Blaster II Compatible"
+
+# --- libusb-1.x or libusb-0.1 based
+
+config OPENOCD_JLINK
+	bool
+	prompt "Segger J-Link JTAG Programmer"
+
+config OPENOCD_OSBDM
+	bool
+	prompt "OSBDM (JTAG only) Programmer"
+
+config OPENOCD_OPENDOUS
+	bool
+	prompt "eStick/opendous JTAG Programmer"
+
+config OPENOCD_AICE
+	bool
+	prompt "Andes JTAG Programmer"
+
+# --- libusb-0.1 based
+
+config OPENOCD_VSLLINK
+	bool
+	prompt "Versaloon-Link JTAG Programmer"
+
+config OPENOCD_USBPROG
+	bool
+	prompt "USBProg JTAG Programmer"
+
+config OPENOCD_RLINK
+	bool
+	prompt "Raisonance RLink JTAG Programmer"
+
+config OPENOCD_ARMJTAGEW
+	bool
+	prompt "Olimex ARM-JTAG-EW Programmer"
+
+# --- hidapi based
+config OPENOCD_CMSIS_DAP
+	bool
+	# needs libhidapi
+	depends on BROKEN
+	prompt "CMSIS-DAP Compliant Debugger"
+
+# --- various
+
+config OPENOCD_PARPORT
+	bool
+	prompt "pc parallel port driver"
+
+if OPENOCD_PARPORT
+	config OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
+		bool
+		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
+
+	config OPENOCD_PARPORT_GIVEIO
+		bool
+		depends on OPENOCD_PARPORT
+		prompt "Enable use of giveio (CygWin only)"
+endif
+
+config OPENOCD_JTAG_VPI
+	bool
+	prompt "JTAG VPI"
+
+config OPENOCD_USB_BLASTER_LIBFTDI
+	bool
+	prompt "Altera USB-Blaster (libftdi driver, opensource)"
+
+config OPENOCD_USB_BLASTER_FTD2XX
+	bool
+	# needs ftd2xx
+	depends on BROKEN
+	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
+
+config OPENOCD_AMTJTAGACCEL
+	bool
+	prompt "Amontec JTAG-Accelerator driver"
+
+config OPENOCD_ZY1000
+	bool
+	# fails to build and disables all other drivers
+	depends on BROKEN
+	prompt "ZY1000 interface"
+
+if OPENOCD_ZY1000
+	config OPENOCD_ZY1000_MASTER
+		bool
+		prompt "Use ZY1000 JTAG master registers"
+endif
+
+config OPENOCD_IOUTIL
+	bool
+	prompt "ioutil functions - for standalone OpenOCD implementations"
+
+config OPENOCD_EP93XX
+	bool
+	prompt "EP93xx based SBCs"
+
+config OPENOCD_AT91RM9200
+	bool
+	prompt "AT91RM9200 based SBCs"
+
+config OPENOCD_BCM2835GPIO
+	bool
+	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
+
+config OPENOCD_GW16012
+	bool
+	prompt "Gateworks GW16012 JTAG Programmer"
+
+config OPENOCD_PRESTO_LIBFTDI
+	bool
+	prompt "ASIX Presto Programmer using the libftdi driver"
+
+config OPENOCD_PRESTO_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "ASIX Presto Programmer using the FTD2XX driver"
+
+config OPENOCD_OPENJTAG_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "OpenJTAG Programmer with ftd2xx driver"
+
+config OPENOCD_OPENJTAG_FTDI
+	bool
+	prompt "OpenJTAG Programmer with ftdi driver"
+
+config OPENOCD_OOCD_TRACE
+	bool
+	prompt "prototype OpenOCD+trace ETM capture hardware"
+
+config OPENOCD_BUSPIRATE
+	bool
+	prompt "Buspirate"
+
+config OPENOCD_SYSFSGPIO
+	bool
+	prompt "programming driven via sysfs gpios"
+
+config OPENOCD_REMOTE_BITBANG
+	bool
+	prompt "Remote Bitbang jtag driver"
+
+endif
diff --git a/rules/openocd.make b/rules/openocd.make
new file mode 100644
index 000000000..7282fb2f7
--- /dev/null
+++ b/rules/openocd.make
@@ -0,0 +1,91 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+PACKAGES-$(PTXCONF_OPENOCD) += openocd
+
+OPENOCD_VERSION	:= 0.8.0
+OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
+OPENOCD		:= openocd-$(OPENOCD_VERSION)
+OPENOCD_SUFFIX	:= tar.bz2
+OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX))
+OPENOCD_SOURCE	:= $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX)
+OPENOCD_DIR	:= $(BUILDDIR)/$(OPENOCD)
+# License: OpenOCD: GPLv2+, jimtcl: BSD
+OPENOCD_LICENSE	:= LGPLv2+, BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+OPENOCD_CONF_TOOL	:= autoconf
+OPENOCD_CONF_OPT	:= $(CROSS_AUTOCONF_USR) \
+	--$(call ptx/endis, PTXCONF_OPENOCD_DUMMY)-dummy \
+	--$(call ptx/endis, PTXCONF_OPENOCD_FTDI)-ftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_STLINK)-stlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_TI_ICDI)-ti-icdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ULINK)-ulink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_JLINK)-jlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OSBDM)-osbdm \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENDOUS)-opendous \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AICE)-aice \
+	--$(call ptx/endis, PTXCONF_OPENOCD_VSLLINK)-vsllink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USBPROG)-usbprog \
+	--$(call ptx/endis, PTXCONF_OPENOCD_RLINK)-rlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ARMJTAGEW)-armjtagew \
+	--$(call ptx/endis, PTXCONF_OPENOCD_CMSIS_DAP)-cmsis-dap \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT)-parport \
+	--$(call ptx/disen, PTXCONF_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_JTAG_VPI)-jtag_vpi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000)-zy1000 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000_MASTER)-zy1000-master \
+	--$(call ptx/endis, PTXCONF_OPENOCD_IOUTIL)-ioutil \
+	--$(call ptx/endis, PTXCONF_OPENOCD_EP93XX)-ep93xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AT91RM9200)-at91rm9200 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_BCM2835GPIO)-bcm2835gpio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_GW16012)-gw16012 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OOCD_TRACE)-oocd_trace \
+	--$(call ptx/endis, PTXCONF_OPENOCD_BUSPIRATE)-buspirate \
+	--$(call ptx/endis, PTXCONF_OPENOCD_SYSFSGPIO)-sysfsgpio \
+	--disable-minidriver-dummy \
+	--$(call ptx/endis, PTXCONF_OPENOCD_REMOTE_BITBANG)-remote-bitbang
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/openocd.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, openocd)
+	@$(call install_fixup, openocd,PRIORITY,optional)
+	@$(call install_fixup, openocd,SECTION,base)
+	@$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch <apr@cn-eng.de>")
+	@$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger")
+
+	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
+ifneq ($(call remove_quotes,$(PTXCONF_OPENOCD_SCRIPTDIR)),)
+	@$(call install_alternative_tree, openocd, 0, 0, $(PTXCONF_OPENOCD_SCRIPTDIR))
+endif
+
+	@$(call install_finish, openocd)
+
+	@$(call touch)
+
+
+# vim: syntax=make