add ssh default config files

git-svn-id: https://svn.pengutronix.de/svn/ptxdist/trunks/ptxdist-trunk@6391 33e552b5-05e3-0310-8538-816dae2090ed

2 files changed, 147 insertions, 0 deletions

diff --git a/generic/etc/ssh/ssh_config b/generic/etc/ssh/ssh_config
new file mode 100644
index 000000000..7bc8762d6
--- /dev/null
+++ b/generic/etc/ssh/ssh_config
@@ -0,0 +1,42 @@
+#	$OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+#   PasswordAuthentication yes
+#   HostbasedAuthentication no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+#   IdentityFile ~/.ssh/id_rsa
+#   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+#   Protocol 2,1
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
diff --git a/generic/etc/ssh/sshd_config b/generic/etc/ssh/sshd_config
new file mode 100644
index 000000000..e02f6965b
--- /dev/null
+++ b/generic/etc/ssh/sshd_config
@@ -0,0 +1,105 @@
+#	$OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+Port 22
+Protocol 2
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 768
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile	.ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing, 
+# and session processing. If this is enabled, PAM authentication will 
+# be allowed through the ChallengeResponseAuthentication mechanism. 
+# Depending on your PAM configuration, this may bypass the setting of 
+# PasswordAuthentication, PermitEmptyPasswords, and 
+# "PermitRootLogin without-password". If you just want the PAM account and 
+# session checks to run without PAM authentication, then enable this but set 
+# ChallengeResponseAuthentication=no
+#UsePAM no
+
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+
+# no default banner path
+#Banner /some/path
+
+# override default of no subsystems
+Subsystem	sftp	/usr/libexec/sftp-server