projectroot: remove obsolete /etc/apache2/httpd.conf

It is no longer installed since 6da485b4940906d50b48da7e6e26e84629cdf142
("apache2: remove after on year in staging")

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>

1 files changed, 0 insertions, 1037 deletions

diff --git a/projectroot/etc/apache2/httpd.conf b/projectroot/etc/apache2/httpd.conf
deleted file mode 100644
index 7b7e6c82f..000000000
--- a/projectroot/etc/apache2/httpd.conf
+++ /dev/null
@@ -1,1037 +0,0 @@
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# The configuration directives are grouped into three basic sections:
-#  1. Directives that control the operation of the Apache server process as a
-#     whole (the 'global environment').
-#  2. Directives that define the parameters of the 'main' or 'default' server,
-#     which responds to requests that aren't handled by a virtual host.
-#     These directives also provide default values for the settings
-#     of all virtual hosts.
-#  3. Settings for virtual hosts, which allow Web requests to be sent to
-#     different IP addresses or hostnames and have them handled by the
-#     same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "@rel_logfiledir@/foo.log"
-# with ServerRoot set to "@@ServerRoot@@" will be interpreted by the
-# server as "@@ServerRoot@@/@rel_logfiledir@/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE!  If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation (available
-# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-# Do NOT add a slash at the end of the directory path.
-#
-ServerRoot @SERVERROOT@
-
-#
-# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
-#
-<IfModule !mpm_winnt.c>
-<IfModule !mpm_netware.c>
-#LockFile @rel_logfiledir@/accept.lock
-</IfModule>
-</IfModule>
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# If unspecified (the default), the scoreboard will be stored in an
-# anonymous shared memory segment, and will be unavailable to third-party
-# applications.
-# If specified, ensure that no two invocations of Apache share the same
-# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
-#
-<IfModule !mpm_netware.c>
-<IfModule !perchild.c>
-#ScoreBoardFile @rel_logfiledir@/apache_runtime_status
-</IfModule>
-</IfModule>
-
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-<IfModule !mpm_netware.c>
-PidFile @PIDFILE@
-</IfModule>
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 15
-
-##
-## Server-Pool Size Regulation (MPM specific)
-## 
-
-# prefork MPM
-# StartServers: number of server processes to start
-# MinSpareServers: minimum number of server processes which are kept spare
-# MaxSpareServers: maximum number of server processes which are kept spare
-# MaxClients: maximum number of server processes allowed to start
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule prefork.c>
-StartServers         2
-MinSpareServers      1
-MaxSpareServers      5
-MaxClients          10
-MaxRequestsPerChild  0
-</IfModule>
-
-# worker MPM
-# StartServers: initial number of server processes to start
-# MaxClients: maximum number of simultaneous client connections
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# ThreadsPerChild: constant number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule worker.c>
-StartServers         2
-MaxClients         150
-MinSpareThreads     25
-MaxSpareThreads     75 
-ThreadsPerChild     25
-MaxRequestsPerChild  0
-</IfModule>
-
-# perchild MPM
-# NumServers: constant number of server processes
-# StartThreads: initial number of worker threads in each server process
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# MaxThreadsPerChild: maximum number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of connections per server process
-<IfModule perchild.c>
-NumServers           5
-StartThreads         5
-MinSpareThreads      5
-MaxSpareThreads     10
-MaxThreadsPerChild  20
-MaxRequestsPerChild  0
-</IfModule>
-
-# WinNT MPM
-# ThreadsPerChild: constant number of worker threads in the server process
-# MaxRequestsPerChild: maximum  number of requests a server process serves
-<IfModule mpm_winnt.c>
-ThreadsPerChild 250
-MaxRequestsPerChild  0
-</IfModule>
-
-# BeOS MPM
-# StartThreads: how many threads do we initially spawn?
-# MaxClients:   max number of threads we can have (1 thread == 1 client)
-# MaxRequestsPerThread: maximum number of requests each thread will process
-<IfModule beos.c>
-StartThreads               10
-MaxClients                 50
-MaxRequestsPerThread       10000
-</IfModule>    
-
-# NetWare MPM
-# ThreadStackSize: Stack size allocated for each worker thread
-# StartThreads: Number of worker threads launched at server startup
-# MinSpareThreads: Minimum number of idle threads, to handle request spikes
-# MaxSpareThreads: Maximum number of idle threads
-# MaxThreads: Maximum number of worker threads alive at the same time
-# MaxRequestsPerChild: Maximum  number of requests a thread serves. It is 
-#                      recommended that the default value of 0 be set for this
-#                      directive on NetWare.  This will allow the thread to 
-#                      continue to service requests indefinitely.                          
-<IfModule mpm_netware.c>
-ThreadStackSize      65536
-StartThreads           250
-MinSpareThreads         25
-MaxSpareThreads        250
-MaxThreads            1000
-MaxRequestsPerChild      0
-MaxMemFree             100
-</IfModule>
-
-# OS/2 MPM
-# StartServers: Number of server processes to maintain
-# MinSpareThreads: Minimum number of idle threads per process, 
-#                  to handle request spikes
-# MaxSpareThreads: Maximum number of idle threads per process
-# MaxRequestsPerChild: Maximum number of connections per server process
-<IfModule mpmt_os2.c>
-StartServers           2
-MinSpareThreads        5
-MaxSpareThreads       10
-MaxRequestsPerChild    0
-</IfModule>
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to 
-# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
-#
-#Listen localhost:80
-Listen @LISTEN@
-#@nonssl_listen_stmt_1@
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-#@@LoadModule@@
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-<IfModule !mpm_winnt.c>
-<IfModule !mpm_netware.c>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-#  . On HPUX you may not be able to use shared memory as nobody, and the
-#    suggested workaround is to create a user www and use that user.
-#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-#  when the value of (unsigned)Group is above 60000; 
-#  don't use Group www on these systems!
-#
-User www
-Group www
-</IfModule>
-</IfModule>
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.  e.g. admin@your-domain.com
-#
-ServerAdmin @SERVERADMIN@
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If this is not set to valid DNS name for your host, server-generated
-# redirections will not work.  See also the UseCanonicalName directive.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address anyway, and this will make 
-# redirections work in a sensible way.
-#
-
-ServerName @SERVERNAME@
-
-#
-# UseCanonicalName: Determines how Apache constructs self-referencing 
-# URLs and the SERVER_NAME and SERVER_PORT variables.
-# When set "Off", Apache will use the Hostname and Port supplied
-# by the client.  When set "On", Apache will use the value of the
-# ServerName directive.
-#
-UseCanonicalName Off
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot @DOCUMENTROOT@
-
-#
-# Each directory to which Apache has access can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories). 
-#
-# First, we configure the "default" to be a very restrictive set of 
-# features.  
-#
-<Directory />
-    Options FollowSymLinks
-    AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory @DOCUMENTROOT@>
-
-#
-# Possible values for the Options directive are "None", "All",
-# or any combination of:
-#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
-# The Options directive is both complicated and important.  Please see
-# http://httpd.apache.org/docs-2.0/mod/core.html#options
-# for more information.
-#
-    Options Indexes FollowSymLinks
-
-#
-# AllowOverride controls what directives may be placed in .htaccess files.
-# It can be "All", "None", or any combination of the keywords:
-#   Options FileInfo AuthConfig Limit Indexes
-#
-    AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
-    Order allow,deny
-    Allow from all
-
-</Directory>
-
-#
-# UserDir: The name of the directory that is appended onto a user's home
-# directory if a ~user request is received.
-#
-UserDir public_html
-
-#
-# Control access to UserDir directories.  The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-#    AllowOverride FileInfo AuthConfig Limit Indexes
-#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-#    <Limit GET POST OPTIONS PROPFIND>
-#        Order allow,deny
-#        Allow from all
-#    </Limit>
-#    <LimitExcept GET POST OPTIONS PROPFIND>
-#        Order deny,allow
-#        Deny from all
-#    </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-# The index.html.var file (a type-map) is used to deliver content-
-# negotiated documents.  The MultiViews Option can be used for the 
-# same purpose, but it is much slower.
-#
-DirectoryIndex index.html index.html.var
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for additional configuration directives.  See also the AllowOverride 
-# directive.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being 
-# viewed by Web clients. 
-#
-<FilesMatch "^\.ht">
-    Order allow,deny
-    Deny from all
-</FilesMatch>
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-TypesConfig @SERVERROOT@/conf/mime.types
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-<IfModule mod_mime_magic.c>
-    MIMEMagicFile @SERVERROOT@/conf/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# EnableMMAP: Control whether memory-mapping is used to deliver
-# files (assuming that the underlying OS supports it).
-# The default is on; turn this off if you serve from NFS-mounted 
-# filesystems.  On some systems, turning it off (regardless of
-# filesystem) can improve performance; for details, please see
-# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
-#
-#EnableMMAP off
-
-#
-# EnableSendfile: Control whether the sendfile kernel support is 
-# used  to deliver files (assuming that the OS supports it).
-# The default is on; turn this off if you serve from NFS-mounted 
-# filesystems.  Please see
-# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
-#
-#EnableSendfile off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog @LOGPATH@/error_log
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%h %l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-# You need to enable mod_logio.c to use %I and %O
-#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here.  Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog @LOGPATH@/access_log common
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog @rel_logfiledir@/referer_log referer
-#CustomLog @rel_logfiledir@/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog @rel_logfiledir@/access_log combined
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#
-ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory 
-# listings, mod_status and mod_info output etc., but not CGI generated 
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#
-ServerSignature On
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is 
-# Alias fakename realname
-#
-# Note that if you include a trailing / on fakename then the server will
-# require it to be present in the URL.  So "/icons" isn't aliased in this
-# example, only "/icons/".  If the fakename is slash-terminated, then the 
-# realname must also be slash terminated, and if the fakename omits the 
-# trailing slash, the realname must also omit it.
-#
-# We include the /icons/ alias for FancyIndexed directory listings.  If you
-# do not use FancyIndexing, you may comment this out.
-#
-Alias /icons/ "icons/"
-
-<Directory "icons">
-    Options Indexes MultiViews
-    AllowOverride None
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# This should be changed to the ServerRoot/manual/.  The alias provides
-# the manual, even if you choose to move your DocumentRoot.  You may comment
-# this out if you do not care for the documentation.
-#
-#AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "manual$1"
-
-#<Directory "manual">
-#    Options Indexes
-#    AllowOverride None
-#    Order allow,deny
-#    Allow from all
-#
-#    <Files *.html>
-#        SetHandler type-map
-#    </Files>
-#
-#    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
-#    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
-#</Directory>
-
-#
-# ScriptAlias: This controls which directories contain server scripts.
-# ScriptAliases are essentially the same as Aliases, except that
-# documents in the realname directory are treated as applications and
-# run by the server when requested rather than as documents sent to the client.
-# The same rules about trailing "/" apply to ScriptAlias directives as to
-# Alias.
-#
-ScriptAlias /cgi-bin/ "cgi-bin/"
-
-<IfModule mod_cgid.c>
-#
-# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
-# for setting UNIX socket for communicating with cgid.
-#
-#Scriptsock            @rel_runtimedir@/cgisock
-</IfModule>
-
-#
-# "bin_cgi" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "cgi-bin">
-    AllowOverride None
-    Options None
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Example:
-# Redirect permanent /foo http://www.example.com/bar
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-
-#
-# IndexOptions: Controls the appearance of server-generated directory
-# listings.
-#
-IndexOptions FancyIndexing VersionSort
-
-#
-# AddIcon* directives tell the server which icon to show for different
-# files or filename extensions.  These are only displayed for
-# FancyIndexed directories.
-#
-AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-AddIconByType (TXT,/icons/text.gif) text/*
-AddIconByType (IMG,/icons/image2.gif) image/*
-AddIconByType (SND,/icons/sound2.gif) audio/*
-AddIconByType (VID,/icons/movie.gif) video/*
-
-AddIcon /icons/binary.gif .bin .exe
-AddIcon /icons/binhex.gif .hqx
-AddIcon /icons/tar.gif .tar
-AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-AddIcon /icons/a.gif .ps .ai .eps
-AddIcon /icons/layout.gif .html .shtml .htm .pdf
-AddIcon /icons/text.gif .txt
-AddIcon /icons/c.gif .c
-AddIcon /icons/p.gif .pl .py
-AddIcon /icons/f.gif .for
-AddIcon /icons/dvi.gif .dvi
-AddIcon /icons/uuencoded.gif .uu
-AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-AddIcon /icons/tex.gif .tex
-AddIcon /icons/bomb.gif core
-
-AddIcon /icons/back.gif ..
-AddIcon /icons/hand.right.gif README
-AddIcon /icons/folder.gif ^^DIRECTORY^^
-AddIcon /icons/blank.gif ^^BLANKICON^^
-
-#
-# DefaultIcon is which icon to show for files which do not have an icon
-# explicitly set.
-#
-DefaultIcon /icons/unknown.gif
-
-#
-# AddDescription allows you to place a short description after a file in
-# server-generated indexes.  These are only displayed for FancyIndexed
-# directories.
-# Format: AddDescription "description" filename
-#
-#AddDescription "GZIP compressed document" .gz
-#AddDescription "tar archive" .tar
-#AddDescription "GZIP compressed tar archive" .tgz
-
-#
-# ReadmeName is the name of the README file the server will look for by
-# default, and append to directory listings.
-#
-# HeaderName is the name of a file which should be prepended to
-# directory indexes. 
-ReadmeName README.html
-HeaderName HEADER.html
-
-#
-# IndexIgnore is a set of filenames which directory indexing should ignore
-# and not include in the listing.  Shell-style wildcarding is permitted.
-#
-IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-#
-# DefaultLanguage and AddLanguage allows you to specify the language of 
-# a document. You can then use content negotiation to give a browser a 
-# file in a language the user can understand.
-#
-# Specify a default language. This means that all data
-# going out without a specific language tag (see below) will 
-# be marked with this one. You probably do NOT want to set
-# this unless you are sure it is correct for all cases.
-#
-# * It is generally better to not mark a page as 
-# * being a certain language than marking it with the wrong
-# * language!
-#
-# DefaultLanguage nl
-#
-# Note 1: The suffix does not have to be the same as the language
-# keyword --- those with documents in Polish (whose net-standard
-# language code is pl) may wish to use "AddLanguage pl .po" to
-# avoid the ambiguity with the common suffix for perl scripts.
-#
-# Note 2: The example entries below illustrate that in some cases 
-# the two character 'Language' abbreviation is not identical to 
-# the two character 'Country' code for its country,
-# E.g. 'Danmark/dk' versus 'Danish/da'.
-#
-# Note 3: In the case of 'ltz' we violate the RFC by using a three char
-# specifier. There is 'work in progress' to fix this and get
-# the reference data for rfc1766 cleaned up.
-#
-# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
-# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
-# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
-# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
-# Norwegian (no) - Polish (pl) - Portugese (pt)
-# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
-# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
-#
-AddLanguage ca .ca
-AddLanguage cs .cz .cs
-AddLanguage da .dk
-AddLanguage de .de
-AddLanguage el .el
-AddLanguage en .en
-AddLanguage eo .eo
-AddLanguage es .es
-AddLanguage et .et
-AddLanguage fr .fr
-AddLanguage he .he
-AddLanguage hr .hr
-AddLanguage it .it
-AddLanguage ja .ja
-AddLanguage ko .ko
-AddLanguage ltz .ltz
-AddLanguage nl .nl
-AddLanguage nn .nn
-AddLanguage no .no
-AddLanguage pl .po
-AddLanguage pt .pt
-AddLanguage pt-BR .pt-br
-AddLanguage ru .ru
-AddLanguage sv .sv
-AddLanguage zh-CN .zh-cn
-AddLanguage zh-TW .zh-tw
-
-#
-# LanguagePriority allows you to give precedence to some languages
-# in case of a tie during content negotiation.
-#
-# Just list the languages in decreasing order of preference. We have
-# more or less alphabetized them here. You probably want to change this.
-#
-LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
-
-#
-# ForceLanguagePriority allows you to serve a result page rather than
-# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
-# [in case no accepted languages matched the available variants]
-#
-ForceLanguagePriority Prefer Fallback
-
-#
-# Commonly used filename extensions to character sets. You probably
-# want to avoid clashes with the language extensions, unless you
-# are good at carefully testing your setup after each change.
-# See http://www.iana.org/assignments/character-sets for the
-# official list of charset names and their respective RFCs.
-#
-AddCharset ISO-8859-1  .iso8859-1  .latin1
-AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
-AddCharset ISO-8859-3  .iso8859-3  .latin3
-AddCharset ISO-8859-4  .iso8859-4  .latin4
-AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
-AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
-AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
-AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
-AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
-AddCharset ISO-2022-JP .iso2022-jp .jis
-AddCharset ISO-2022-KR .iso2022-kr .kis
-AddCharset ISO-2022-CN .iso2022-cn .cis
-AddCharset Big5        .Big5       .big5
-# For russian, more than one charset is used (depends on client, mostly):
-AddCharset WINDOWS-1251 .cp-1251   .win-1251
-AddCharset CP866       .cp866
-AddCharset KOI8-r      .koi8-r .koi8-ru
-AddCharset KOI8-ru     .koi8-uk .ua
-AddCharset ISO-10646-UCS-2 .ucs2
-AddCharset ISO-10646-UCS-4 .ucs4
-AddCharset UTF-8       .utf8
-
-# The set below does not map to a specific (iso) standard
-# but works on a fairly wide range of browsers. Note that
-# capitalization actually matters (it should not, but it
-# does for some browsers).
-#
-# See http://www.iana.org/assignments/character-sets
-# for a list of sorts. But browsers support few.
-#
-AddCharset GB2312      .gb2312 .gb 
-AddCharset utf-7       .utf7
-AddCharset utf-8       .utf8
-AddCharset big5        .big5 .b5
-AddCharset EUC-TW      .euc-tw
-AddCharset EUC-JP      .euc-jp
-AddCharset EUC-KR      .euc-kr
-AddCharset shift_jis   .sjis
-
-#
-# AddType allows you to add to or override the MIME configuration
-# file mime.types for specific file types.
-#
-#AddType application/x-tar .tgz
-#
-# AddEncoding allows you to have certain browsers uncompress
-# information on the fly. Note: Not all browsers support this.
-# Despite the name similarity, the following Add* directives have nothing
-# to do with the FancyIndexing customization directives above.
-#
-#AddEncoding x-compress .Z
-#AddEncoding x-gzip .gz .tgz
-#
-# If the AddEncoding directives above are commented-out, then you
-# probably should define those extensions to indicate media types:
-#
-AddType application/x-compress .Z
-AddType application/x-gzip .gz .tgz
-
-#
-# AddHandler allows you to map certain file extensions to "handlers":
-# actions unrelated to filetype. These can be either built into the server
-# or added with the Action directive (see below)
-#
-# To use CGI scripts outside of ScriptAliased directories:
-# (You will also need to add "ExecCGI" to the "Options" directive.)
-#
-#AddHandler cgi-script .cgi
-
-#
-# For files that include their own HTTP headers:
-#
-#AddHandler send-as-is asis
-
-#
-# For server-parsed imagemap files:
-#
-#AddHandler imap-file map
-
-#
-# For type maps (negotiated resources):
-# (This is enabled by default to allow the Apache "It Worked" page
-#  to be distributed in multiple languages.)
-#
-AddHandler type-map var
-
-#
-# Filters allow you to process content before it is sent to the client.
-#
-# To parse .shtml files for server-side includes (SSI):
-# (You will also need to add "Includes" to the "Options" directive.)
-#
-#AddType text/html .shtml
-#AddOutputFilter INCLUDES .shtml
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# Putting this all together, we can internationalize error responses.
-#
-# We use Alias to redirect any /error/HTTP_<error>.html.var response to
-# our collection of by-error message multi-language collections.  We use 
-# includes to substitute the appropriate text.
-#
-# You can modify the messages' appearance without changing any of the
-# default HTTP_<error>.html.var files by adding the line:
-#
-#   Alias /error/include/ "/your/include/path/"
-#
-# which allows you to create your own set of files by starting with the
-# @exp_errordir@/include/ files and copying them to /your/include/path/, 
-# even on a per-VirtualHost basis.  The default include files will display
-# your Apache version number and your ServerAdmin email address regardless
-# of the setting of ServerSignature.
-#
-# The internationalized error documents require mod_alias, mod_include
-# and mod_negotiation.  To activate them, uncomment the following 30 lines.
-
-#    Alias /error/ "@exp_errordir@/"
-#
-#    <Directory "@exp_errordir@">
-#        AllowOverride None
-#        Options IncludesNoExec
-#        AddOutputFilter Includes html
-#        AddHandler type-map var
-#        Order allow,deny
-#        Allow from all
-#        LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
-#        ForceLanguagePriority Prefer Fallback
-#    </Directory>
-#
-#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
-#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
-#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
-#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
-#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
-#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
-#    ErrorDocument 410 /error/HTTP_GONE.html.var
-#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
-#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
-#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
-#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
-#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
-#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
-#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
-#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
-#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
-#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
-
-
-#
-# The following directives modify normal HTTP response behavior to
-# handle known problems with browser implementations.
-#
-BrowserMatch "Mozilla/2" nokeepalive
-BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-BrowserMatch "RealPlayer 4\.0" force-response-1.0
-BrowserMatch "Java/1\.0" force-response-1.0
-BrowserMatch "JDK/1\.0" force-response-1.0
-
-#
-# The following directive disables redirects on non-GET requests for
-# a directory that does not include the trailing slash.  This fixes a 
-# problem with Microsoft WebFolders which does not appropriately handle 
-# redirects for folders with DAV methods.
-# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
-#
-BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
-BrowserMatch "MS FrontPage" redirect-carefully
-BrowserMatch "^WebDrive" redirect-carefully
-BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
-BrowserMatch "^gnome-vfs" redirect-carefully
-BrowserMatch "^XML Spy" redirect-carefully
-BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
-
-#
-# Allow server status reports generated by mod_status,
-# with the URL of http://servername/server-status
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-status>
-#    SetHandler server-status
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-#  http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-info>
-#    SetHandler server-info
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-
-#
-# Bring in additional module-specific configurations
-#
-#<IfModule mod_ssl.c>
-#    Include @rel_sysconfdir@/ssl.conf
-#</IfModule>
-
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at 
-# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-#    ServerAdmin webmaster@dummy-host.example.com
-#    DocumentRoot /www/docs/dummy-host.example.com
-#    ServerName dummy-host.example.com
-#    ErrorLog @rel_logfiledir@/dummy-host.example.com-error_log
-#    CustomLog @rel_logfiledir@/dummy-host.example.com-access_log common
-#</VirtualHost>