--- mii-diag-2.11.orig/mii-diag.8 +++ mii-diag-2.11/mii-diag.8 @@ -61,7 +61,7 @@ .B \-F, --fixed-speed Speed is one of: 100baseT4, 100baseTx, 100baseTx-FD, 100baseTx-HD, 10baseT, -10baseT-FD, 10baseT-HD. For more precise control an explict numeric +10baseT-FD, 10baseT-HD. For more precise control an explicit numeric register setting is also allowed. @@ -117,7 +117,7 @@ .PP The '--monitor' option allows scripting link beat changes. .PP -This option is similar to --watch, but with lower overhead and simplifed +This option is similar to --watch, but with lower overhead and simplified output. It polls the interface only once a second and the output format is a single line per link change with three fixed words --- mii-diag-2.11.orig/debian/mii-diag-udeb.dirs +++ mii-diag-2.11/debian/mii-diag-udeb.dirs @@ -0,0 +1 @@ +usr/sbin --- mii-diag-2.11.orig/debian/postinst +++ mii-diag-2.11/debian/postinst @@ -0,0 +1,47 @@ +#! /bin/sh +# postinst script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `configure' +# * `abort-upgrade' +# * `abort-remove' `in-favour' +# +# * `abort-deconfigure' `in-favour' +# `removing' +# +# for details, see /usr/doc/packaging-manual/ +# +# quoting from the policy: +# Any necessary prompting should almost always be confined to the +# post-installation script, and should be protected with a conditional +# so that unnecessary prompting doesn't happen if a package's +# installation fails and the `postinst' is called with `abort-upgrade', +# `abort-remove' or `abort-deconfigure'. + +case "$1" in + configure) + + ;; + + abort-upgrade|abort-remove|abort-deconfigure) + + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/changelog +++ mii-diag-2.11/debian/changelog @@ -0,0 +1,177 @@ +mii-diag (2.11-2) unstable; urgency=low + + * Fix Typos in manpage (closes: #325676) + + -- Alain Schroeder Sat, 3 Jun 2006 11:57:52 +0200 + +mii-diag (2.11-1) unstable; urgency=low + + * New Upstream + * Switched to upstreams manpage + + -- Alain Schroeder Sat, 26 Mar 2005 18:58:53 +0100 + +mii-diag (2.09-1) unstable; urgency=low + + * Build udeb (smaller binary, not using libmii) (Closes: #247177) + * Fix manpage, thanks to Jim Van Zandt (Closes: #229386) + * New Upstream: new -C (Set BMCR) and -m (Monitor) switches. + * Add manpage entries for new -C and -m switches. + + -- Alain Schroeder Mon, 3 May 2004 22:05:56 +0200 + +mii-diag (2.07-1) unstable; urgency=low + + * New Upstream + * mii-diag 2.07 + * Split the -G command into -g and -G + * libmii 2.10 + * New chip-ids added + * Better support for TDK, VIA and Intel chips + * Updated man-page + * Cleaned my helptext from multiline strings, Thanks to Daniel Schepler + (Closes: #194987) + + -- Alain Schroeder Fri, 6 Jun 2003 20:46:44 +0200 + +mii-diag (2.05-1) unstable; urgency=low + + * New Upstream. It now has a detailed --help from upstream. + * Fixed manpage to match --help. + + -- Alain Schroeder Sat, 27 Jul 2002 22:23:07 +0200 + +mii-diag (2.04-1) unstable; urgency=low + + * New Upstream - few fixes and it now showes, if the old or new SIOCGMIIPHY + is used. + * Add "-s" parameter to manpage, which is documented in the helptext. + (Closes: #146879). + + -- Alain Schroeder Sun, 26 May 2002 15:47:21 +0200 + +mii-diag (2.03-1) unstable; urgency=low + + * New Upstream (closes: #133000). + * Some small changes to the manpage. + * Do not use dh_testversion anymore. + + -- Alain Schroeder Sun, 10 Feb 2002 00:16:46 +0100 + +mii-diag (2.02-4) unstable; urgency=low + + * Fix-a-typo (closes: #130565) + + -- Alain Schroeder Wed, 23 Jan 2002 23:51:54 +0100 + +mii-diag (2.02-3) unstable; urgency=low + + * Fix-a-typo in description. (closes: #125136) + * Make mii-diag flush after changes (Thanks to Ingvar Mattsson). + + -- Alain Schroeder Sat, 22 Dec 2001 16:28:28 +0100 + +mii-diag (2.02-2) unstable; urgency=low + + * Removed Build dependency on libc6-dev + + -- Alain Schroeder Tue, 10 Jul 2001 13:28:48 +0200 + +mii-diag (2.02-1) unstable; urgency=low + + * Splitted nictools source into mii-diag, nictools-pci and + nictools-nopci. + * Bumped version to 2.02, because mii-diag has that version. + + -- Alain Schroeder Mon, 18 Jun 2001 22:15:42 +0200 + +nictools (1.3.1-2) unstable; urgency=low + + * Removed a tab from debian/control + + -- Alain Schroeder Fri, 1 Jun 2001 13:40:30 +0200 + +nictools (1.3.1-1) unstable; urgency=low + + * New Upstream(s): + ** Added ns820-diag for cards with Myson MTD803 chip (v1.00) + ** Added myson-diag for cards with National Semiconductor DP83820 + chips (v2.02) + ** Updated eepro-diag (v2.04) + ** Updated epic-diag (v2.01) + ** Updated libmmi (v2.04) + ** Updated mii-diag (v2.02) + ** Updated natsemi-diag (v2.04) + ** Updated ne2k-pci-diag (v2.01) + ** Updatet rtl8139-diag (v2.03) + ** Updated tulip-diag (v2.08) + ** Updated via-diag (v2.06) + ** Updated vortex-diag (v2.05) + * Added myson-diag and ns820-diag to description + + -- Alain Schroeder Tue, 22 May 2001 00:18:46 +0200 + +nictools (1.3-6) unstable; urgency=low + + * Added patch that allowes building this package with + /usr/src/kernel-source-* as a symlink from Guido Guenther. + (Closes: #95850) + * Added Build-Depend on gawk. + + -- Alain Schroeder Tue, 17 Apr 2001 00:10:20 +0200 + +nictools (1.3-5) unstable; urgency=low + + * I was a bit too fast with making 3c5x9utils an obsolete package. + I forgot to include the actual binaries. (Closes: #94194) + + -- Alain Schroeder Tue, 17 Apr 2001 00:10:20 +0200 + +nictools (1.3-4) unstable; urgency=low + + * Modified the Descriptions a little bit. + * Wrote manpages for atlantic-diag, atp-diag, eexpress-diag, e21-diag, + hp+-diag and ne2k-diag. + + -- Alain Schroeder Thu, 8 Mar 2001 02:53:10 +0100 + +nictools (1.3-3) unstable; urgency=low + + * Reimplemented debian/rules cleanly. + * Wrote manpages for 3c515-diag, alta-diag and at1700-diag. + + -- Alain Schroeder Wed, 28 Feb 2001 14:02:04 +0100 + +nictools (1.3-2) unstable; urgency=low + + * Fixed Typos in mii-diag's description, closes: #83700 + * Wrote a manpage for mii-diag, closes: #83702 + * Implemented a real "help" mode with all infos from the manpagei in + mii-diag. + + -- Alain Schroeder Fri, 16 Feb 2001 16:03:35 +0100 + +nictools (1.3-1) unstable; urgency=low + + * Jumped upstream version up to 1.3 to nicely integrate 3c5x9utils. + * Reconstructed the building. Now 3c9x5utils and nictools-noisa ist only + build on i386, while nictools-pci is i386 arm alpha only. mii-diag is + the only package that can be crosscompiled, closes: #84704, #85233 + + -- Alain Schroeder Mon, 5 Feb 2001 15:07:24 +0100 + +nictools (1.0-2) unstable; urgency=low + + * Fixed Description to not be wrapped, closes: #83985 + + -- Alain Schroeder Tue, 30 Jan 2001 13:26:25 +0100 + +nictools (1.0-1) unstable; urgency=low + + * Initial Release, closes: #83441 + + -- Alain Schroeder Tue, 9 Jan 2001 20:27:27 +0100 + +Local variables: +mode: debian-changelog +End: --- mii-diag-2.11.orig/debian/control +++ mii-diag-2.11/debian/control @@ -0,0 +1,28 @@ +Source: mii-diag +Section: net +Priority: extra +Maintainer: Alain Schroeder +Standards-Version: 3.7.2.0 +Build-Depends: debhelper (>= 4.2) + +Package: mii-diag +Architecture: any +Section: net +Depends: ${shlibs:Depends} +Suggests: nictools-pci, nictools-nopci +Description: A little tool to manipulate network cards + Examines and sets the MII registers of network cards. + . + This is a general program. You can find specialized programs for + several network cards in the nictools-pci and nictools-nopci packages. + +Package: mii-diag-udeb +Architecture: any +Section: debian-installer +Depends: ${shlibs:Depends} +XC-Package-Type: udeb +Description: A little tool to manipulate network cards + Examines and sets the MII registers of network cards. + . + This is a general program. You can find specialized programs for + several network cards in the nictools-pci and nictools-nopci packages. --- mii-diag-2.11.orig/debian/copyright +++ mii-diag-2.11/debian/copyright @@ -0,0 +1,13 @@ +This package was debianized by Alain Schroeder on +Tue, 9 Jan 2001 20:27:27 +0100. + +It was downloaded from http://www.scyld.com/diag/index.html + +Upstream Author: Donald Becker + +Copyright: + + You are free to distribute this software under the terms of the GNU + General Public License. The full text of this license can be found + in the file /usr/share/common-licenses/GPL. + --- mii-diag-2.11.orig/debian/postrm +++ mii-diag-2.11/debian/postrm @@ -0,0 +1,38 @@ +#! /bin/sh +# postrm script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `purge' +# * `upgrade' +# * `failed-upgrade' +# * `abort-install' +# * `abort-install' +# * `abort-upgrade' +# * `disappear' overwrit>r> +# for details, see /usr/doc/packaging-manual/ + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + + # update the menu system +# if [ -x /usr/bin/update-menus ]; then update-menus; fi + + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 0 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + + --- mii-diag-2.11.orig/debian/rules +++ mii-diag-2.11/debian/rules @@ -0,0 +1,92 @@ +#!/usr/bin/make -f +# Sample debian/rules that uses debhelper. +# GNU copyright 1997 by Joey Hess. +# +# This version is for a hypothetical package that builds an +# architecture-dependant package, as well as an architecture-independent +# package. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# This is the debhelper compatability version to use. +export DH_COMPAT=4 + +# This has to be exported to make some magic below work. +export DH_OPTIONS + +BUILD_ARCH:=$(shell dpkg --print-gnu-build-architecture) +# New cross-compilation policy may set the DEB_HOST_ARCH variable. +ifdef DEB_HOST_ARCH + ARCH:=$(DEB_HOST_ARCH) +else + # dpkg-cross sets the ARCH environment variable, so use it. + ifdef ARCH + ARCH:=$(ARCH) + else + ARCH:=$(BUILD_ARCH) + endif +endif + +build: build-stamp +build-stamp: + dh_testdir + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + # Add here commands to clean up after the build process. + -$(MAKE) clean + -rm -rf debian/mii-diag debian/mii-diag-udeb + + dh_clean + +install: DH_OPTIONS= +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + $(MAKE) mii-diag + dh_install -pmii-diag mii-diag usr/sbin + $(MAKE) clean + $(MAKE) mii-diag-udeb + dh_install -pmii-diag-udeb mii-diag usr/sbin + #dh_movefiles + +# Build architecture-independent files here. +# Pass -i to all debhelper commands in this target to reduce clutter. +binary-indep: DH_OPTIONS=-i +binary-indep: build install + +# Build architecture-dependent files here. +# Pass -a to all debhelper commands in this target to reduce clutter. +binary-arch: DH_OPTIONS=-s +binary-arch: build install +# dh_testversion 1.1.17 + dh_testdir + dh_testroot + dh_installdocs + dh_installexamples + dh_installmenu + dh_installcron + + dh_installman + + dh_installinfo + dh_installchangelogs + dh_strip + dh_link + dh_compress + dh_fixperms + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- mii-diag-2.11.orig/debian/prerm +++ mii-diag-2.11/debian/prerm @@ -0,0 +1,37 @@ +#! /bin/sh +# prerm script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `upgrade' +# * `failed-upgrade' +# * `remove' `in-favour' +# * `deconfigure' `in-favour' +# `removing' +# +# for details, see /usr/doc/packaging-manual/ + +case "$1" in + remove|upgrade|deconfigure) +# install-info --quiet --remove /usr/info/nictools.info.gz + ;; + failed-upgrade) + ;; + *) + echo "prerm called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/preinst +++ mii-diag-2.11/debian/preinst @@ -0,0 +1,40 @@ +#! /bin/sh +# preinst script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `install' +# * `install' +# * `upgrade' +# * `abort-upgrade' + +case "$1" in + install|upgrade) +# if [ "$1" = "upgrade" ] +# then +# start-stop-daemon --stop --quiet --oknodo \ +# --pidfile /var/run/nictools.pid \ +# --exec /usr/sbin/nictools 2>/dev/null || true +# fi + ;; + + abort-upgrade) + ;; + + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/mii-diag-udeb.files +++ mii-diag-2.11/debian/mii-diag-udeb.files @@ -0,0 +1 @@ +usr/sbin/mii-diag --- mii-diag-2.11.orig/debian/mii-diag-udeb.manpages +++ mii-diag-2.11/debian/mii-diag-udeb.manpages @@ -0,0 +1 @@ +debian/mii-diag.8 --- mii-diag-2.11.orig/debian/mii-diag-udeb.postrm +++ mii-diag-2.11/debian/mii-diag-udeb.postrm @@ -0,0 +1,38 @@ +#! /bin/sh +# postrm script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `purge' +# * `upgrade' +# * `failed-upgrade' +# * `abort-install' +# * `abort-install' +# * `abort-upgrade' +# * `disappear' overwrit>r> +# for details, see /usr/doc/packaging-manual/ + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + + # update the menu system +# if [ -x /usr/bin/update-menus ]; then update-menus; fi + + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 0 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + + --- mii-diag-2.11.orig/debian/mii-diag-udeb.preinst +++ mii-diag-2.11/debian/mii-diag-udeb.preinst @@ -0,0 +1,40 @@ +#! /bin/sh +# preinst script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `install' +# * `install' +# * `upgrade' +# * `abort-upgrade' + +case "$1" in + install|upgrade) +# if [ "$1" = "upgrade" ] +# then +# start-stop-daemon --stop --quiet --oknodo \ +# --pidfile /var/run/nictools.pid \ +# --exec /usr/sbin/nictools 2>/dev/null || true +# fi + ;; + + abort-upgrade) + ;; + + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/mii-diag.dirs +++ mii-diag-2.11/debian/mii-diag.dirs @@ -0,0 +1,2 @@ +usr/sbin +usr/share/man/man8 --- mii-diag-2.11.orig/debian/mii-diag-udeb.prerm +++ mii-diag-2.11/debian/mii-diag-udeb.prerm @@ -0,0 +1,37 @@ +#! /bin/sh +# prerm script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `upgrade' +# * `failed-upgrade' +# * `remove' `in-favour' +# * `deconfigure' `in-favour' +# `removing' +# +# for details, see /usr/doc/packaging-manual/ + +case "$1" in + remove|upgrade|deconfigure) +# install-info --quiet --remove /usr/info/nictools.info.gz + ;; + failed-upgrade) + ;; + *) + echo "prerm called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/mii-diag.manpages +++ mii-diag-2.11/debian/mii-diag.manpages @@ -0,0 +1 @@ +mii-diag.8 --- mii-diag-2.11.orig/debian/mii-diag-udeb.postinst +++ mii-diag-2.11/debian/mii-diag-udeb.postinst @@ -0,0 +1,47 @@ +#! /bin/sh +# postinst script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `configure' +# * `abort-upgrade' +# * `abort-remove' `in-favour' +# +# * `abort-deconfigure' `in-favour' +# `removing' +# +# for details, see /usr/doc/packaging-manual/ +# +# quoting from the policy: +# Any necessary prompting should almost always be confined to the +# post-installation script, and should be protected with a conditional +# so that unnecessary prompting doesn't happen if a package's +# installation fails and the `postinst' is called with `abort-upgrade', +# `abort-remove' or `abort-deconfigure'. + +case "$1" in + configure) + + ;; + + abort-upgrade|abort-remove|abort-deconfigure) + + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/mii-diag.postinst +++ mii-diag-2.11/debian/mii-diag.postinst @@ -0,0 +1,47 @@ +#! /bin/sh +# postinst script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `configure' +# * `abort-upgrade' +# * `abort-remove' `in-favour' +# +# * `abort-deconfigure' `in-favour' +# `removing' +# +# for details, see /usr/doc/packaging-manual/ +# +# quoting from the policy: +# Any necessary prompting should almost always be confined to the +# post-installation script, and should be protected with a conditional +# so that unnecessary prompting doesn't happen if a package's +# installation fails and the `postinst' is called with `abort-upgrade', +# `abort-remove' or `abort-deconfigure'. + +case "$1" in + configure) + + ;; + + abort-upgrade|abort-remove|abort-deconfigure) + + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/mii-diag.preinst +++ mii-diag-2.11/debian/mii-diag.preinst @@ -0,0 +1,40 @@ +#! /bin/sh +# preinst script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `install' +# * `install' +# * `upgrade' +# * `abort-upgrade' + +case "$1" in + install|upgrade) +# if [ "$1" = "upgrade" ] +# then +# start-stop-daemon --stop --quiet --oknodo \ +# --pidfile /var/run/nictools.pid \ +# --exec /usr/sbin/nictools 2>/dev/null || true +# fi + ;; + + abort-upgrade) + ;; + + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/mii-diag.prerm +++ mii-diag-2.11/debian/mii-diag.prerm @@ -0,0 +1,37 @@ +#! /bin/sh +# prerm script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `upgrade' +# * `failed-upgrade' +# * `remove' `in-favour' +# * `deconfigure' `in-favour' +# `removing' +# +# for details, see /usr/doc/packaging-manual/ + +case "$1" in + remove|upgrade|deconfigure) +# install-info --quiet --remove /usr/info/nictools.info.gz + ;; + failed-upgrade) + ;; + *) + echo "prerm called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- mii-diag-2.11.orig/debian/mii-diag.postrm +++ mii-diag-2.11/debian/mii-diag.postrm @@ -0,0 +1,38 @@ +#! /bin/sh +# postrm script for nictools +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `purge' +# * `upgrade' +# * `failed-upgrade' +# * `abort-install' +# * `abort-install' +# * `abort-upgrade' +# * `disappear' overwrit>r> +# for details, see /usr/doc/packaging-manual/ + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + + # update the menu system +# if [ -x /usr/bin/update-menus ]; then update-menus; fi + + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 0 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + + --- mii-diag-2.11.orig/debian/mii-diag.files +++ mii-diag-2.11/debian/mii-diag.files @@ -0,0 +1 @@ +usr/sbin/mii-diag --- mii-diag-2.11.orig/Makefile +++ mii-diag-2.11/Makefile @@ -0,0 +1,26 @@ +CFLAGS= -O -Wall +CC=gcc +INSTALL=install + +LIBS=libmii.o + +all: mii-diag mii-diag-udeb + +mii-diag: + $(CC) $(CFLAGS) -Wstrict-prototypes -O mii-diag.c -DLIBMII \ + libmii.c -o mii-diag + +mii-diag-udeb: + $(CC) -Os -Wstrict-prototypes -O mii-diag.c -o mii-diag +clean: + rm -f *.o mii-diag mii-diag-udeb *~ + +install-mii-diag: + mkdir -p $(DESTDIR)/usr/sbin + $(INSTALL) mii-diag $(DESTDIR)/usr/sbin + +install-mii-diag-udeb: + mkdir -p $(DESTDIR)/usr/sbin + $(INSTALL) mii-diag-udeb $(DESTDIR)/usr/sbin/mii-diag + +install: all install-mii-diag