## SECTION=bootloader

menuconfig U_BOOT
	select BOOTLOADER
	prompt "U-Boot                        "
	bool

if U_BOOT

config U_BOOT_VERSION
	string
	default "2019.01"
	prompt "U-Boot version"
	help
	  Enter the U-Boot version you want to build. Usually something like
	  "2019.01".

config U_BOOT_MD5
	string
	prompt "U-Boot source md5"

choice
	prompt "config system"
	default U_BOOT_CONFIGSYSTEM_LEGACY

config U_BOOT_CONFIGSYSTEM_KCONFIG
	prompt "Kconfig"
	bool
	help
	  U-Boot from version 2014.10 uses Kconfig for configuring a target.
	  Use this if you want to configure U-Boot inside the BSP, e.g.
	  with menuconfig.
	  
	  NOTE: if you just want to use a defconfig, you can still use the
	  legacy config system by using the name of a defconfig file from
	  the "configs" folder as config target.

config U_BOOT_CONFIGSYSTEM_LEGACY
	prompt "legacy"
	bool
	help
	  Select this if you use an old U-Boot prior 2014.10 or want to use
	  a defconfig as config target.

endchoice

if U_BOOT_CONFIGSYSTEM_KCONFIG

config U_BOOT_CONFIGFILE_KCONFIG
	prompt "config file"
	string
	default "u-boot.config"
	help
	  This entry specifies the .config file used to compile U-Boot.

endif

if U_BOOT_CONFIGSYSTEM_LEGACY

config U_BOOT_CONFIG
	prompt "U-Boot config target"
	string
	help
	  The U-Boot make config target. Usually something like
	  "yourbox_config". Before U-Boot 2014.10 that was something from
	  the file "boards.cfg". With version 2014.10 U-Boot switched to
	  Kconfig based build and configuration, and from there you could
	  use some defconfig name as config target, e.g.
	  "yourbox_defconfig", where that name is a file from the folder
	  "configs".

endif

config U_BOOT_CUSTOM_MAKE_OPTS
	prompt "Custom make options"
	string
	help
	  List of custom make options passed at build time. Can be
	  used for example to pass a DEVICE_TREE= value.

choice
	prompt "Generate environment image"
	default U_BOOT_ENV_IMAGE_NONE
	help
	  U-Boot from version 2018.03 supports out-of-tree environment
	  image generation.

config U_BOOT_ENV_IMAGE_NONE
	prompt "none"
	bool
	help
	  Don't generate an U-Boot environment image.

config U_BOOT_ENV_IMAGE_DEFAULT
	prompt "default"
	bool
	help
	  Use U-Boot's mkenvimage to compile a default U-Boot environment
	  image for use in e.g. device manufacturing or development.

config U_BOOT_ENV_IMAGE_CUSTOM
	prompt "custom"
	bool
	help
	  Use U-Boot's mkenvimage to compile a custom U-Boot environment
	  image based on the text file in U_BOOT_ENV_IMAGE_CUSTOM_SOURCE
	  for use in e.g. device manufacturing or development.

endchoice

config U_BOOT_ENV_IMAGE_CUSTOM_SOURCE
	prompt "Custom environment source"
	string
	default "custom_env.config"
	depends on U_BOOT_ENV_IMAGE_CUSTOM
	help
	  Text file in platform config directory describing the custom
	  environment.
	  The file should have lines in the form var=value, one per line.
	  Blank lines and lines starting with a # are ignored.

if !U_BOOT_ENV_IMAGE_NONE

config U_BOOT_ENV_IMAGE_SIZE
	prompt "Environment image size"
	hex
	default 0x2000
	help
	  Enter the U-Boot environment size in hexadecimal for generation
	  of image. A wrong size will typically cause crc error when used.
	  Must match size defined in target config and "/etc/fw_env.config".

config U_BOOT_ENV_IMAGE_REDUNDANT
	prompt "Environment image with redundant copy"
	bool
	help
	  Use to generate a redundant environment in the image.
	  Must match target config and "/etc/fw_env.config".

endif

config U_BOOT_BOOT_SCRIPT
	prompt "Compile U-Boot boot script"
	bool
	help
	  Use U-Boot's mkimage to compile a U-Boot boot script and install it
	  into the rootfs

if U_BOOT_BOOT_SCRIPT

config U_BOOT_BOOT_SCRIPT_ROOTFS_PATH
	string
	default "/boot/boot.scr.uimg"
	prompt "Installation path"
	help
	  Target rootfs path where the U-Boot script should be located

endif

comment "target install"

config U_BOOT_INSTALL_SREC
	prompt "install u-boot.srec"
	bool
	help
	  Installing the U-Boot srec hexfile into platform image directory.

config U_BOOT_INSTALL_ELF
	prompt "install u-boot.elf"
	bool
	help
	  Installing the U-Boot ELF binary into platform image directory.

config U_BOOT_INSTALL_SPL
	prompt "install SPL"
	bool
	help
	  Installing the U-Boot SPL (Secondary Program Loader) binary into
	  platform image directory.

config U_BOOT_INSTALL_MLO
	prompt "install MLO"
	bool
	depends on !X_LOAD
	help
	  Installing the U-Boot SPL ("MLO") binary needed for OMAP CPUs into platform
	  image directory.

if U_BOOT_INSTALL_MLO || U_BOOT_INSTALL_SPL

config U_BOOT_INSTALL_U_BOOT_IMG
	prompt "install u-boot.img"
	bool
	help
	  Installing the U-Boot image with header ("u-boot.img") which is executed
	  by U-Boot SPL into platform image directory.

endif

config U_BOOT_INSTALL_U_BOOT_IMX
	prompt "install u-boot.imx"
	bool
	help
	  Installing the U-Boot image with imx header (u-boot.imx) into platform 
	  image directory. Say yes if you are building for freescale i.MX SOCs
	  and are not using SPL.

config U_BOOT_INSTALL_U_BOOT_DTB_IMX
        prompt "install u-boot-dtb.imx"
        bool
        help
          Installing the U-Boot image with device tree support and imx header (u-boot-dtb.imx)
          into platform image directory. Say yes if you are building for freescale i.MX SOCs
          and are not using SPL.

config U_BOOT_INSTALL_U_BOOT_DTB
	prompt "install u-boot-dtb.bin"
	bool
	help
	  Installing the U-Boot binary concatenated with the device tree
	  into platform image directory.

config U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
	prompt "install u-boot-with-spl-pbl.bin"
	bool
	help
	  Installing the U-Boot binary which contains as well the SPL and PBL.
	  Say yes if you are building for Layerscape SoCs

config U_BOOT_INSTALL_U_BOOT_STM32
	prompt "install u-boot.stm32"
	bool
	help
	  Installing the U-Boot image with stm32 header (u-boot.stm32) into
	  platform image directory. Say yes if you are building for STM32MP1
	  SOCs.

endif