diff options
| author | Sakari Ailus <sakari.ailus@linux.intel.com> | 2017-12-01 13:37:12 -0500 |
|---|---|---|
| committer | Bartosz Golaszewski <brgl@bgdev.pl> | 2017-12-03 20:50:31 +0100 |
| commit | f9ecc83f8d723372976df8eda3193726d7a24fcb (patch) | |
| tree | 2acb2635716a7180477bdf5979a3b74354edd37c | |
| parent | ae64f9bd1d3621b5e60d7363bc20afb46aede215 (diff) | |
| download | linux-f9ecc83f8d723372976df8eda3193726d7a24fcb.tar.gz linux-f9ecc83f8d723372976df8eda3193726d7a24fcb.tar.xz | |
eeprom: at24: fix I2C device selection for runtime PM
The at24 driver creates dummy I2C devices to access offsets in the chip
that are outside the area supported using a single I2C address. It is not
meaningful to use runtime PM to such devices; the system firmware (ACPI)
does not know about these devices nor runtime PM was enabled for them.
Always use the real device instead of the dummy ones.
Fixes: 98e8201039af ("eeprom: at24: enable runtime pm support")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sven Van Asbroeck on a 24AA16/24LC16B <svendev@arcx.com>
[Bartosz: rebased on top of previous fixes for 4.15, tweaked the
commit message]
[Sven: fixed Bartosz's rebase]
Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
| -rw-r--r-- | drivers/misc/eeprom/at24.c | 24 |
1 files changed, 10 insertions, 14 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 305a7a464d09..20b4f26d30d7 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -562,7 +562,7 @@ static ssize_t at24_eeprom_write_i2c(struct at24_data *at24, const char *buf, static int at24_read(void *priv, unsigned int off, void *val, size_t count) { struct at24_data *at24 = priv; - struct i2c_client *client; + struct device *dev = &at24->client[0]->dev; char *buf = val; int ret; @@ -572,11 +572,9 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) if (off + count > at24->chip.byte_len) return -EINVAL; - client = at24_translate_offset(at24, &off); - - ret = pm_runtime_get_sync(&client->dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) { - pm_runtime_put_noidle(&client->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -592,7 +590,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) status = at24->read_func(at24, buf, off, count); if (status < 0) { mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return status; } buf += status; @@ -602,7 +600,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return 0; } @@ -610,7 +608,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) static int at24_write(void *priv, unsigned int off, void *val, size_t count) { struct at24_data *at24 = priv; - struct i2c_client *client; + struct device *dev = &at24->client[0]->dev; char *buf = val; int ret; @@ -620,11 +618,9 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) if (off + count > at24->chip.byte_len) return -EINVAL; - client = at24_translate_offset(at24, &off); - - ret = pm_runtime_get_sync(&client->dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) { - pm_runtime_put_noidle(&client->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -640,7 +636,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) status = at24->write_func(at24, buf, off, count); if (status < 0) { mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return status; } buf += status; @@ -650,7 +646,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return 0; } |