summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Linux 4.11-rc4v4.11-rc4Linus Torvalds2017-03-261-1/+1
|
* Merge tag 'char-misc-4.11-rc4' of ↵Linus Torvalds2017-03-2621-88/+111
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "A smattering of different small fixes for some random driver subsystems. Nothing all that major, just resolutions for reported issues and bugs. All have been in linux-next with no reported issues" * tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) extcon: int3496: Set the id pin to direction-input if necessary extcon: int3496: Use gpiod_get instead of gpiod_get_index extcon: int3496: Add dependency on X86 as it's Intel specific extcon: int3496: Add GPIO ACPI mapping table extcon: int3496: Rename GPIO pins in accordance with binding vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly ppdev: fix registering same device name parport: fix attempt to write duplicate procfiles auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches Drivers: hv: vmbus: Don't leak memory when a channel is rescinded Drivers: hv: vmbus: Don't leak channel ids Drivers: hv: util: don't forget to init host_ts.lock Drivers: hv: util: move waiting for release to hv_utils_transport itself vmbus: remove hv_event_tasklet_disable/enable vmbus: use rcu for per-cpu channel list mei: don't wait for os version message reply mei: fix deadlock on mei reset intel_th: pci: Add Gemini Lake support intel_th: pci: Add Denverton SOC support intel_th: Don't leak module refcount on failure to activate ...
| * Merge tag 'extcon-fixes-for-4.11-rc3' of ↵Greg Kroah-Hartman2017-03-223-12/+34
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus Chanwoo writes: Update extcon for v4.11-rc3 This patch fixes issues for Intel INT3496 ACPI device as following: - Propagate error code of gpiod_to_irq(). - Set the ID pin as the input direction if firmware has the bug - Rename the gpio name for bining according to the documentation. - Add gpio acpi mapping table and the dependency on X86. - Use the devm_gpiod_get() instead of gpiod_get_index because of acpi mapping table.
| | * extcon: int3496: Set the id pin to direction-input if necessaryHans de Goede2017-03-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the new more strict ACPI gpio code the dsdt's IoRestriction flags are honored on gpiod_get, but in some dsdt's it is wrong, so explicitly call gpiod_direction_input on the id gpio if necessary. This fixes the following errors when the int3496 code is used together with the new more strict ACPI gpio code: [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22 [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | * extcon: int3496: Use gpiod_get instead of gpiod_get_indexHans de Goede2017-03-221-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we've an acpi mapping table we should be using gpiod_get instead of gpiod_get_index. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | * extcon: int3496: Add dependency on X86 as it's Intel specificPeter Robinson2017-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add dependency on X86 so it doesn't show up on other arches and add a option for compile test so it still gets build coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | * extcon: int3496: Add GPIO ACPI mapping tableAndy Shevchenko2017-03-222-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | * extcon: int3496: Rename GPIO pins in accordance with bindingAndy Shevchenko2017-03-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Update GPIO pin names in extcon-intel-int3496.c driver to follow the existing extcon binding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | * extcon: int3496: Propagate error code of gpiod_to_irq()Andy Shevchenko2017-03-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | gpiod_to_irq() doesn't return 0. Thus, we just adjust condition and replace -EINVAL by actual error code it returns. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * | vmw_vmci: handle the return value from pci_alloc_irq_vectors correctlyChristoph Hellwig2017-03-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It returns the number of vectors allocated when successful, so check for a negative error only. Fixes: 3bb434cd ("vmw_vmci: switch to pci_irq_alloc_vectors") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Loïc Yhuel <loic.yhuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | ppdev: fix registering same device nameSudip Mukherjee2017-03-161-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a big warning like: "sysfs: cannot create duplicate filename '/devices/parport0/ppdev0.0'". And with that many parallel port printers stopped working. We have been using the minor number as the id field while registering a parralel port device with a parralel port. But when there are multiple parrallel port device for one single parallel port, they all tried to register with the same name like 'pardev0.0' and everything started failing. Use an incremented index as the id instead of the minor number. Fixes: 8b7d3a9d903e ("ppdev: use new parport device model") Cc: stable <stable@vger.kernel.org> # v4.9+ Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322 Tested-by: James Feeney <james@nurealm.net> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | parport: fix attempt to write duplicate procfilesSudip Mukherjee2017-03-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a nice warning like: "sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists" Use the same logic as used in parport_register_device() and register the proc files only once for each parallel port. Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem") Cc: stable <stable@vger.kernel.org> # v4.4+ Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322 Tested-by: James Feeney <james@nurealm.net> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matchesDmitry Torokhov2017-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OF device table must be terminated, otherwise we'll be walking past it and into areas unknown. Fixes: 0cad855fbd08 ("auxdisplay: img-ascii-lcd: driver for simple ASCII...") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Drivers: hv: vmbus: Don't leak memory when a channel is rescindedK. Y. Srinivasan2017-03-161-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we close a channel that has been rescinded, we will leak memory since vmbus_teardown_gpadl() returns an error. Fix this so that we can properly cleanup the memory allocated to the ring buffers. Fixes: ccb61f8a99e6 ("Drivers: hv: vmbus: Fix a rescind handling bug") Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Drivers: hv: vmbus: Don't leak channel idsK. Y. Srinivasan2017-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | If we cannot allocate memory for the channel, free the relid associated with the channel. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Drivers: hv: util: don't forget to init host_ts.lockDexuan Cui2017-03-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without the patch, I always get a "BUG: spinlock bad magic" warning. Fixes: 3716a49a81ba ("hv_utils: implement Hyper-V PTP source") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Drivers: hv: util: move waiting for release to hv_utils_transport itselfVitaly Kuznetsov2017-03-165-16/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Waiting for release_event in all three drivers introduced issues on release as on_reset() hook is not always called. E.g. if the device was never opened we will never get the completion. Move the waiting code to hvutil_transport_destroy() and make sure it is only called when the device is open. hvt->lock serialization should guarantee the absence of races. Fixes: 5a66fecbf6aa ("Drivers: hv: util: kvp: Fix a rescind processing issue") Fixes: 20951c7535b5 ("Drivers: hv: util: Fcopy: Fix a rescind processing issue") Fixes: d77044d142e9 ("Drivers: hv: util: Backup: Fix a rescind processing issue") Reported-by: Dexuan Cui <decui@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | vmbus: remove hv_event_tasklet_disable/enableDexuan Cui2017-03-163-30/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the recent introduction of per-channel tasklet, we need to update the way we handle the 3 concurrency issues: 1. hv_process_channel_removal -> percpu_channel_deq vs. vmbus_chan_sched -> list_for_each_entry(..., percpu_list); 2. vmbus_process_offer -> percpu_channel_enq/deq vs. vmbus_chan_sched. 3. vmbus_close_internal vs. the per-channel tasklet vmbus_on_event; The first 2 issues can be handled by Stephen's recent patch "vmbus: use rcu for per-cpu channel list", and the third issue can be handled by calling tasklet_disable in vmbus_close_internal here. We don't need the original hv_event_tasklet_disable/enable since we now use per-channel tasklet instead of the previous per-CPU tasklet, and actually we must remove them due to the side effect now: vmbus_process_offer -> hv_event_tasklet_enable -> tasklet_schedule will start the per-channel callback prematurely, cauing NULL dereferencing (the channel may haven't been properly configured to run the callback yet). Fixes: 631e63a9f346 ("vmbus: change to per channel tasklet") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | vmbus: use rcu for per-cpu channel listStephen Hemminger2017-03-163-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The per-cpu channel list is now referred to in the interrupt routine. This is mostly safe since the host will not normally generate an interrupt when channel is being deleted but if it did then there would be a use after free problem. To solve, this use RCU protection on ther per-cpu list. Fixes: 631e63a9f346 ("vmbus: change to per channel tasklet") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | mei: don't wait for os version message replyAlexander Usyskin2017-03-161-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver still struggles with firmwares that do not replay to the OS version request. It is safe not waiting for the replay. First, the driver doesn't do anything with the replay second the connection is closed immediately, hence the packet will be just safely discarded in case it is received and last the driver won't get stuck if the firmware won't reply. Cc: <stable@vger.kernel.org> #4.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | mei: fix deadlock on mei resetTomas Winkler2017-03-161-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes 'mei: synchronize irq before initiating a reset' The patch had introduced a deadlock between irq thread and mei_reset() as they are both holding the same device lock. ---> device_lock: mei_reset() <---- interrupt thread device_lock ---> synchornize_irq() wait on interrupt thread == (dead lock) The fix is to call synchronize_irq prior to call locked mei_reset function. Cc: <stable@vger.kernel.org> #4.10+ Fixes: f302bb0de6ac (mei: synchronize irq before initiating a reset) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Merge tag 'stm-fixes-for-greg-20170315' of ↵Greg Kroah-Hartman2017-03-162-1/+13
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-linus Alexander writes: intel_th: Fixes for 4.11 These are: * fix for a module refcount leak * two new PCI IDs
| | * intel_th: pci: Add Gemini Lake supportAlexander Shishkin2017-03-151-0/+5
| | | | | | | | | | | | | | | | | | This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
| | * intel_th: pci: Add Denverton SOC supportAlexander Shishkin2017-03-151-0/+5
| | | | | | | | | | | | | | | | | | This adds Intel(R) Trace Hub PCI ID for Denverton SOC. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
| | * intel_th: Don't leak module refcount on failure to activateAlexander Shishkin2017-03-151-1/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Output 'activation' may fail for the reasons of the output driver, for example, if msc's buffer is not allocated. We forget, however, to drop the module reference in this case. So each attempt at activation in this case leaks a reference, preventing the module from ever unloading. This patch adds the missing module_put() in the activation error path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v4.8+
* | Merge tag 'driver-core-4.11-rc4' of ↵Linus Torvalds2017-03-261-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single kernfs fix for 4.11-rc4 that resolves a reported issue. It has been in linux-next with no reported issues" * tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()
| * | kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()Vaibhav Jain2017-03-171-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently started seeing a kernel oops when a module tries removing a memory mapped sysfs bin_attribute. On closer investigation the root cause seems to be kernfs_release_file() trying to call kernfs_op.release() callback that's NULL for such sysfs bin_attributes. The oops occurs when kernfs_release_file() is called from kernfs_drain_open_files() to cleanup any open handles with active memory mappings. The patch fixes this by checking for flag KERNFS_HAS_RELEASE before calling kernfs_release_file() in function kernfs_drain_open_files(). On ppc64-le arch with cxl module the oops back-trace is of the form below: [ 861.381126] Unable to handle kernel paging request for instruction fetch [ 861.381360] Faulting instruction address: 0x00000000 [ 861.381428] Oops: Kernel access of bad area, sig: 11 [#1] .... [ 861.382481] NIP: 0000000000000000 LR: c000000000362c60 CTR: 0000000000000000 .... Call Trace: [c000000f1680b750] [c000000000362c34] kernfs_drain_open_files+0x104/0x1d0 (unreliable) [c000000f1680b790] [c00000000035fa00] __kernfs_remove+0x260/0x2c0 [c000000f1680b820] [c000000000360da0] kernfs_remove_by_name_ns+0x60/0xe0 [c000000f1680b8b0] [c0000000003638f4] sysfs_remove_bin_file+0x24/0x40 [c000000f1680b8d0] [c00000000062a164] device_remove_bin_file+0x24/0x40 [c000000f1680b8f0] [d000000009b7b22c] cxl_sysfs_afu_remove+0x144/0x170 [cxl] [c000000f1680b940] [d000000009b7c7e4] cxl_remove+0x6c/0x1a0 [cxl] [c000000f1680b990] [c00000000052f694] pci_device_remove+0x64/0x110 [c000000f1680b9d0] [c0000000006321d4] device_release_driver_internal+0x1f4/0x2b0 [c000000f1680ba20] [c000000000525cb0] pci_stop_bus_device+0xa0/0xd0 [c000000f1680ba60] [c000000000525e80] pci_stop_and_remove_bus_device+0x20/0x40 [c000000f1680ba90] [c00000000004a6c4] pci_hp_remove_devices+0x84/0xc0 [c000000f1680bad0] [c00000000004a688] pci_hp_remove_devices+0x48/0xc0 [c000000f1680bb10] [c0000000009dfda4] eeh_reset_device+0xb0/0x290 [c000000f1680bbb0] [c000000000032b4c] eeh_handle_normal_event+0x47c/0x530 [c000000f1680bc60] [c000000000032e64] eeh_handle_event+0x174/0x350 [c000000f1680bd10] [c000000000033228] eeh_event_handler+0x1e8/0x1f0 [c000000f1680bdc0] [c0000000000d384c] kthread+0x14c/0x190 [c000000f1680be30] [c00000000000b5a0] ret_from_kernel_thread+0x5c/0xbc Fixes: f83f3c515654 ("kernfs: fix locking around kernfs_ops->release() callback") Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'tty-4.11-rc4' of ↵Linus Torvalds2017-03-264-75/+30
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 4.11-rc4. One of these fix a long-standing issue in the ldisc code that was found by Dmitry Vyukov with his great fuzzing work. The other fixes resolve other reported issues, and there is one revert of a patch in 4.11-rc1 that wasn't correct. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix data race in tty_ldisc_ref_wait() tty: don't panic on OOM in tty_set_ldisc() Revert "tty: serial: pl011: add ttyAMA for matching pl011 console" tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision serial: 8250_dw: Fix breakage when HAVE_CLK=n serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
| * | tty: fix data race in tty_ldisc_ref_wait()Dmitry Vyukov2017-03-171-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tty_ldisc_ref_wait() checks tty->ldisc under tty->ldisc_sem. But if ldisc==NULL it releases them sem and reloads tty->ldisc without holding the sem. This is wrong and can lead to returning non-NULL ldisc without protection. Don't reload tty->ldisc second time. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: syzkaller@googlegroups.com Cc: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | tty: don't panic on OOM in tty_set_ldisc()Dmitry Vyukov2017-03-171-69/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If tty_ldisc_open() fails in tty_set_ldisc(), it tries to go back to the old discipline or N_TTY. But that can fail as well, in such case it panics. This is not a graceful way to handle OOM. Leave ldisc==NULL if all attempts fail instead. Also use existing tty_ldisc_reinit() helper function instead of tty_ldisc_restore(). Also don't WARN/BUG in tty_ldisc_reinit() if N_TTY fails, which would have the same net effect of bringing kernel down on OOM. Instead print a single line message about what has happened. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: syzkaller@googlegroups.com Cc: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"Aleksey Makarov2017-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original patch makes the condition always true, so it is wrong. It masks (but not fixes) the bug described in the commit message but introduces a regression (no console is selected by SPCR) in regular (no 'console=ttyAMA') case. s/||/&&/ would not fix the problem as the root cause was identified incorrectly. This reverts commit aea9a80ba98a0c9b4de88850260e9fbdcc98360b. Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revisionTimur Tabi2017-03-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Qualcomm Technologies QDF2400 SOCs that are affected by erratum E44, the ACPI oem_revision field is actually set to 1, not 0. Fixes: d8a4995bcea1 ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit") Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | serial: 8250_dw: Fix breakage when HAVE_CLK=nJames Hogan2017-03-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") recently broke the 8250_dw driver on platforms which don't select HAVE_CLK, as dw8250_set_termios() gets confused by the behaviour of the fallback HAVE_CLK=n clock API in linux/clk.h which pretends everything is fine but returns (valid) NULL clocks and 0 HZ clock rates. That 0 rate is written into the uartclk resulting in a crash at boot, e.g. on Cavium Octeon III based UTM-8 we get something like this: 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 25000000) is a OCTEON ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1 at drivers/tty/serial/serial_core.c:441 uart_get_baud_rate+0xfc/0x1f0 ... Call Trace: ... [<ffffffff8149c2e4>] uart_get_baud_rate+0xfc/0x1f0 [<ffffffff814a5098>] serial8250_do_set_termios+0xb0/0x440 [<ffffffff8149c710>] uart_set_options+0xe8/0x190 [<ffffffff814a6cdc>] serial8250_console_setup+0x84/0x158 [<ffffffff814a11ec>] univ8250_console_setup+0x54/0x70 [<ffffffff811901a0>] register_console+0x1c8/0x418 [<ffffffff8149f004>] uart_add_one_port+0x434/0x4b0 [<ffffffff814a1af8>] serial8250_register_8250_port+0x2d8/0x440 [<ffffffff814aa620>] dw8250_probe+0x388/0x5e8 ... The clock API is defined such that NULL is a valid clock handle so it wouldn't be right to check explicitly for NULL. Instead treat a clk_round_rate() return value of 0 as an error which prevents uartclk being overwritten. Fixes: 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: David Daney <david.daney@cavium.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-serial@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: bcm-kernel-feedback-list@broadcom.com Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jason Uy <jason.uy@broadcom.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termiosHeiko Stuebner2017-03-141-2/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_round_rate returns a signed long and may possibly return errors in it, for example if there is no possible rate. Till now dw8250_set_termios ignored any error, the signednes and would just use the value as input to clk_set_rate. This of course falls apart if there is an actual error, so check for errors and only try to set a rate if the value is actually valid. This turned up on some Rockchip platforms after commit 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") enabled set_termios callback in all cases, not only ACPI. Fixes: 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'staging-4.11-rc4' of ↵Linus Torvalds2017-03-265-9/+20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO driver fixes from Greg KH: "Here are some small IIO driver fixes for 4.11-rc4 that resolve a number of tiny reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration iio: adc: ti_am335x_adc: fix fifo overrun recovery iio: sw-device: Fix config group initialization iio: magnetometer: ak8974: remove incorrect __exit markups iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
| * \ Merge tag 'iio-fixes-for-4.11c' of ↵Greg Kroah-Hartman2017-03-225-9/+20
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Thirds set of IIO fixes for the 4.11 cycle. * core - iio sw-device - ensure configfs is enabled both when building as module and built in. * ak8974 - drop incorrect __exit markup on remove. * hid-sensor-trigger - code reorganise to avoid losing settings if a power cycle occurs during S3. * lsm6dsx - fix incorrect overwrite of parts of FIFO_CTRL2 register during watermark configuration. * ti-am335x - fix a hard to hit bug when reenabling from a fifo overrun by waiting for current cycle to finish.
| | * iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configurationLorenzo Bianconi2017-03-191-2/+2
| | | | | | | | | | | | | | | | | | Fixes: 290a6ce11d93 (iio: imu: add support to lsm6dsx driver) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: ti_am335x_adc: fix fifo overrun recoveryMichael Engl2017-03-151-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tiadc_irq_h(int irq, void *private) function is handling FIFO overruns by clearing flags, disabling and enabling the ADC to recover. If the ADC is running in continuous mode a FIFO overrun happens regularly. If the disabling of the ADC happens concurrently with a new conversion. It might happen that the enabling of the ADC is ignored by the hardware. This stops the ADC permanently. No more interrupts are triggered. According to the AM335x Reference Manual (SPRUH73H October 2011 - Revised April 2013 - Chapter 12.4 and 12.5) it is necessary to check the ADC FSM bits in REG_ADCFSM before enabling the ADC again. Because the disabling of the ADC is done right after the current conversion has been finished. To trigger this bug it is necessary to run the ADC in continuous mode. The ADC values of all channels need to be read in an endless loop. The bug appears within the first 6 hours (~5.4 million handled FIFO overruns). The user space application will hang on reading new values from the character device. Fixes: ca9a563805f7a ("iio: ti_am335x_adc: Add continuous sampling support") Signed-off-by: Michael Engl <michael.engl@wjw-solutions.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: sw-device: Fix config group initializationLars-Peter Clausen2017-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the IS_ENABLED() helper macro to ensure that the configfs group is initialized either when configfs is built-in or when configfs is built as a module. Otherwise software device creation will result in undefined behaviour when configfs is built as a module since the configfs group for the device not properly initialized. Similar to commit b2f0c09664b7 ("iio: sw-trigger: Fix config group initialization"). Fixes: 0f3a8c3f34f7 ("iio: Add support for creating IIO devices via configfs") Reported-by: Miguel Robles <miguel.robles@farole.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Daniel Baluta <daniel.baluta@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: magnetometer: ak8974: remove incorrect __exit markupsDmitry Torokhov2017-03-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if bus is not hot-pluggable, devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: hid-sensor-trigger: Change get poll value function order to avoid ↵Song Hongyan2017-03-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sensor properties losing after resume from S3 In function _hid_sensor_power_state(), when hid_sensor_read_poll_value() is called, sensor's all properties will be updated by the value from sensor hardware/firmware. In some implementation, sensor hardware/firmware will do a power cycle during S3. In this case, after resume, once hid_sensor_read_poll_value() is called, sensor's all properties which are kept by driver during S3 will be changed to default value. But instead, if a set feature function is called first, sensor hardware/firmware will be recovered to the last status. So change the sensor_hub_set_feature() calling order to behind of set feature function to avoid sensor properties lose. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | Merge tag 'usb-4.11-rc4' of ↵Linus Torvalds2017-03-2626-247/+141
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.11-rc4. Nothing major here, just an bunch of small fixes, and a handfull of good fixes from Johan for devices with crazy descriptors. There are a few new device ids in here as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held usb: gadget: udc: remove pointer dereference after free usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval usb: gadget: acm: fix endianness in notifications usb: dwc3: gadget: delay unmap of bounced requests USB: serial: qcserial: add Dell DW5811e usb: hub: Fix crash after failure to read BOS descriptor ACM gadget: fix endianness in notifications USB: usbtmc: fix probe error path USB: usbtmc: add missing endpoint sanity check USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems usb: musb: fix possible spinlock deadlock usb: musb: dsps: fix iounmap in error and exit paths usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk uwb: i1480-dfu: fix NULL-deref at probe uwb: hwa-rc: fix NULL-deref at probe USB: wusbcore: fix NULL-deref at probe USB: uss720: fix NULL-deref at probe ...
| * \ \ Merge tag 'usb-serial-4.11-rc4' of ↵Greg Kroah-Hartman2017-03-232-1/+18
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.11-rc4 Some more device ids for option and qcserial. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * | | USB: serial: qcserial: add Dell DW5811eBjørn Mork2017-03-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a Dell branded Sierra Wireless EM7455. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * | | USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modemsDan Williams2017-03-141-1/+16
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Quectel UC15, UC20, EC21, and EC25. The EC20 is handled by qcserial due to a USB VID/PID conflict with an existing Acer device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * | | Merge tag 'fixes-for-v4.11-rc4' of ↵Greg Kroah-Hartman2017-03-23372-2949/+5757
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.11-rc4 f_acm got an endianness fix by Oliver Neukum. This has been around for a long time but it's finally fixed. f_hid learned that it should never access hidg->req without first grabbing the spinlock. Roger Quadros fixed two bugs in the f_uvc function driver. Janusz Dziedzic fixed a very peculiar bug with EP0, one that's rather difficult to trigger. When we're dealing with bounced EP0 requests, we should delay unmap until after ->complete() is called. UDC class got a use-after-free fix.
| | * | | usb: gadget: f_hid: fix: Don't access hidg->req without spinlock heldKrzysztof Opasiak2017-03-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hidg->req should be accessed only with write_spinlock held as it is set to NULL when we get disabled by host. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | usb: gadget: udc: remove pointer dereference after freeGustavo A. R. Silva2017-03-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pointer dereference after free. Addresses-Coverity-ID: 1091173 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeedRoger Quadros2017-03-221-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor", for interrupt and isochronous endpoints, wMaxPacketSize must be set to 1024 if the endpoint defines bMaxBurst to be greater than zero. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * | | usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerIntervalRoger Quadros2017-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-20 12:34:13 +0000