doc: replace "copy onto" by "write to" to prevent confusion

"Copy" could be misunderstood as "use cp (on the file system level)",
which will not lead to the intended results, i.e. writing to the device
directly (e.g. using dd).

Furthermore, using "write onto" [1] instead of "write to" [2] feels
unnatural here – as if writing something on top of another. Use "to"
instead.

[1]: about 460.000 Google results
[2]: about 146.000.000 Google results

Signed-off-by: Roland Hieber <rhi@pengutronix.de>

9 files changed, 13 insertions, 13 deletions

diff --git a/doc/hardware_v7a_beaglebone_black.rst b/doc/hardware_v7a_beaglebone_black.rst
index bb523b6..f0adfb9 100644
--- a/doc/hardware_v7a_beaglebone_black.rst
+++ b/doc/hardware_v7a_beaglebone_black.rst
@@ -3,7 +3,7 @@ Beaglebone Black
 
 Boot Media
 ----------
-Use the image ``platform-v7a/images/beaglebone.hdimg`` and copy it onto your MicroSD-Card.
+Use the image ``platform-v7a/images/beaglebone.hdimg`` and write it to your MicroSD-Card.
 Press the user-button ``S2`` when powering up the Beaglebone Black to boot from MicroSD-Card. ``S2`` is the button above the MicroSD-Card.
 
 Serial Console
diff --git a/doc/hardware_v7a_beaglebone_white.rst b/doc/hardware_v7a_beaglebone_white.rst
index 540066b..2ed669b 100644
--- a/doc/hardware_v7a_beaglebone_white.rst
+++ b/doc/hardware_v7a_beaglebone_white.rst
@@ -3,7 +3,7 @@ Beaglebone White
 
 Boot Media
 ----------
-Use the image ``platform-v7a/images/beaglebone.hdimg`` and copy it onto your MicroSD-Card.
+Use the image ``platform-v7a/images/beaglebone.hdimg`` and write it to your MicroSD-Card.
 
 Serial Console
 --------------
diff --git a/doc/hardware_v7a_noneon_sama5d3.rst b/doc/hardware_v7a_noneon_sama5d3.rst
index db784e3..aaeed3e 100644
--- a/doc/hardware_v7a_noneon_sama5d3.rst
+++ b/doc/hardware_v7a_noneon_sama5d3.rst
@@ -10,7 +10,7 @@ Boot Media
 ----------
 
 DistroKit generates ``platform-v7a_noneon/images/*.hdimg``.
-Use the respective image for your board and copy it onto your SD card.
+Use the respective image for your board and write it to your SD card.
 
 The EVB-KSZ9477 board has only 1 SD slot. To boot from SD, J13 (NAND Enable)
 jumper should be removed.
diff --git a/doc/hardware_v7a_raspi23.rst b/doc/hardware_v7a_raspi23.rst
index 0f6eee6..f1d2041 100644
--- a/doc/hardware_v7a_raspi23.rst
+++ b/doc/hardware_v7a_raspi23.rst
@@ -3,7 +3,7 @@ Raspberry Pi 2
 
 Boot Media
 ----------
-Use the same ``platform-v7a/images/rpi.hdimg`` image and copy it onto your MicroSD-Card.
+Use the same ``platform-v7a/images/rpi.hdimg`` image and write it to your MicroSD-Card.
 
 Serial Console
 --------------
@@ -18,7 +18,7 @@ Raspberry Pi 3
 
 Boot Media
 ----------
-Use the same ``platform-v7a/images/rpi.hdimg`` image and copy it onto your MicroSD-Card.
+Use the same ``platform-v7a/images/rpi.hdimg`` image and write it to your MicroSD-Card.
 
 Serial Console
 --------------
@@ -33,7 +33,7 @@ Raspberry Pi Compute Module 3+
 
 Boot Media
 ----------
-Use the same ``platform-v7a/images/rpi.hdimg`` image and copy it onto your MicroSD-Card.
+Use the same ``platform-v7a/images/rpi.hdimg`` image and write it to your MicroSD-Card.
 
 If you have a hardware with eMMC the uSD slot is not functional, in this case
 you have to use `usbboot <https://github.com/raspberrypi/usbboot>`_ to switch
diff --git a/doc/hardware_v7a_riot.rst b/doc/hardware_v7a_riot.rst
index 0ea4ce7..77b48cb 100644
--- a/doc/hardware_v7a_riot.rst
+++ b/doc/hardware_v7a_riot.rst
@@ -3,7 +3,7 @@ RIoT-Board
 
 Boot Media
 ----------
-Use the image ``platform-v7a/images/riotboard.hdimg`` and copy it onto your SD card.
+Use the image ``platform-v7a/images/riotboard.hdimg`` and write it to your SD card.
 
 Set the DIP switches (SW1) accordingly to boot from a full-size SD card (J6
 on the bottom) or a Micro SD card (J7 on top):
diff --git a/doc/hardware_v7a_sama5d2.rst b/doc/hardware_v7a_sama5d2.rst
index ae39cdf..083a46d 100644
--- a/doc/hardware_v7a_sama5d2.rst
+++ b/doc/hardware_v7a_sama5d2.rst
@@ -10,7 +10,7 @@ Boot Media
 ----------
 
 DistroKit generates ``platform-v7a/images/sama5d27-*.hdimg``.
-Use the respective image for your board and copy it onto your SD card.
+Use the respective image for your board and write it to your SD card.
 The Giant board has only 1 microSD slot, the EK has additionally
 1 normal SD-sized slot. Both can be used.
 
diff --git a/doc/hardware_v7a_udoo_neo.rst b/doc/hardware_v7a_udoo_neo.rst
index b84fde7..674bdfe 100644
--- a/doc/hardware_v7a_udoo_neo.rst
+++ b/doc/hardware_v7a_udoo_neo.rst
@@ -4,7 +4,7 @@ Udoo Neo
 Boot Media
 ----------
 
-Use the image ``platform-v7a/images/udoo-neo.hdimg`` and copy it onto your MicroSD-Card. 
+Use the image ``platform-v7a/images/udoo-neo.hdimg`` and write it to your MicroSD-Card. 
 
 
 Serial Console
diff --git a/doc/hardware_v8a_espressobin.rst b/doc/hardware_v8a_espressobin.rst
index 63d3e89..dc4fc77 100644
--- a/doc/hardware_v8a_espressobin.rst
+++ b/doc/hardware_v8a_espressobin.rst
@@ -3,7 +3,7 @@ Marvell espressobin
 
 Boot Media
 ----------
-Use the image ``platform-v8a/images/espressobin.hdimg`` and copy it onto your MicroSD-Card, e.g:
+Use the image ``platform-v8a/images/espressobin.hdimg`` and write it to your MicroSD-Card, e.g:
 
 .. code-block:: shell
 
diff --git a/doc/hardware_v8a_rock3a.rst b/doc/hardware_v8a_rock3a.rst
index 72eb9d8..72bf187 100644
--- a/doc/hardware_v8a_rock3a.rst
+++ b/doc/hardware_v8a_rock3a.rst
@@ -4,12 +4,12 @@ Radxa Rock 3 Model A
 Boot Media
 ----------
 
-Copy the image ``platform-v8a/images/rock3a.img`` onto a microSD card. Put the
+Write the image ``platform-v8a/images/rock3a.img`` to a microSD card. Put the
 microSD card into the Rock 3A and boot it, the system will autoboot to linux.
 
 If you just want to boot to barebox instead of a full linux image from microSD card
 (e.g. for chainloading or tftpboot),
-copy the image ``platform-v8a/images/barebox-rock3a.norimg`` onto a microSD card instead.
+write the image ``platform-v8a/images/barebox-rock3a.norimg`` to a microSD card instead.
 
 Alternatively, you may put the Rock 3A into MASKROM mode following the `Rock 3
 Hardware User Manual <https://wiki.radxa.com/Rock3/hardware/3a>`_ and boot
@@ -19,7 +19,7 @@ Barebox via USB:
 
     platform-v8a/sysroot-host/bin/rk-usb-loader platform-v8a/images/barebox-rock3a.img
 
-Once Barebox is booted, copy the image ``platform-v8a/images/rock3a.img`` via
+Once Barebox is booted, write the image ``platform-v8a/images/rock3a.img`` via
 tftp or NFS to the eMMC to persist it. Disable MASKROM mode and reboot the
 board to start from eMMC.