summaryrefslogtreecommitdiffstats
path: root/configs/platform-v7a/barebox-mx6.config
Commit message (Collapse)AuthorAgeFilesLines
* v7a: barebox: update v2022.01.0 → v2022.04.0Ahmad Fatoum2022-04-261-5/+24
| | | | | | | | | | | | | | Config changes are those of olddefconfig with the exception of CONFIG_FS_UBIFS_COMPRESSION_ZSTD for the i.MX6 barebox: We already have UBIFS support enabled, so it makes sense to allow mounting UBIFS with zstd as well. This update imports two barebox patches to address regressions due to recent Raspberry Pi upstream rework. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20220426083821.1829442-2-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: update v2021.11.0 → v2022.01.0Ahmad Fatoum2022-01-221-2/+9
| | | | | | | | | | | | Freshest barebox release incorporates the OMAP patches we have in the BSP. Bump up the release and drop these two patches in return. The release also introduced CONFIG_STM32_BSEC_WRITE, which enables blowing e-fuses on STM32MP1 SoCs, e.g. to persist an Ethernet address. We support a couple of STM32MP1 boards, so it makes sense to enable this option. All other Kconfig changes are those of olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: version bump v2021.08.0 → v2021.11.0Ahmad Fatoum2021-11-261-7/+17
| | | | | | | | Update to latest barebox release. Config changes are the default. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20211126064836.1306873-2-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.07.0 → v2021.08.0Ahmad Fatoum2021-08-241-1/+15
| | | | | | | | | Update to latest barebox release. Config changes are the default. In return we can drop the one patch that went upstream in the mean time. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210824125248.22580-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.05.0 → v2021.07.0Ahmad Fatoum2021-07-221-2/+9
| | | | | | | | | | | | | | | barebox v2021.07.0 now comes with support for first stage boot on the SAMA5D3. The SAMA5D3 has a v7a CPU but lacks NEON, so it doesn't make sense to enable for the v7a platform. Unfortunately, barebox master is upset if you don't build both sama5d2 and sama5d3 at the same time. Instead of working around this in the defconfig and enabling a board we don't need and may forget to disable, import a small patch. We should be able to drop this with v2021.08.0. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210722133520.17946-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.04.0 → v2021.05.0Ahmad Fatoum2021-06-021-1/+7
| | | | | | | | | | | | | | | | Updating to v2021.05.0 lets us drop the single patch we have, as it went upstream in revised form. Kconfig changes are those produced by oldconfig. One notable new option is CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG, which allows barebox to embed its configuration as /env/data/config analogously to /proc/config.gz, which we already enable for Linux. This is not enabled here, but might be something we want to use eventually. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210602111803.15832-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: version bump v2021.02.0 → v2021.04.0Ahmad Fatoum2021-04-231-3/+12
| | | | | | | | | | | | | | | | | | | | | Updating to v2021.04.0 lets us drop the patches we have, but unfortunately we need to import a new patch in return to fix a USB/Ethernet breakage on barebox-rpi2. Kconfig changes are those produced by oldconfig, except for the following: - BTHREAD: new feature that's not used by default, but could use some extra coverage. Enable it for all configuration, except for am335x-mlo, where we have a restrictive size limitation. - MACH_STM32MP15X_EV1: The EV1 is the full featured STM32MP1 evaluation kit. In preperation for supporting this, enable its newly added barebox support. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.pengutronix.de/20210421073820.1318-1-a.fatoum@pengutronix.de Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a/barebox: Enable commands of_fixup_status and of_overlayUwe Kleine-König2021-03-151-3/+4
| | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* v7a: barebox update 2020.09.0 -> 2021.02.0Uwe Kleine-König2021-03-151-12/+17
| | | | | | | | | | | | | | One new patch is required to fix a regression for USB on rpi3. Also USB on rpi3 requires CONFIG_USB_NOP_XCEIV=y now which is enabled in the rpi2 config now. For the beaglebone two patches are added fixing a regression related to a dts sync from upstream. All three patches were already sent to the barebox mailing list. Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* v7a: barebox: version bump v2020.08.1 → v2020.09.0Ahmad Fatoum2020-11-011-2/+5
| | | | | | | | | | | | | The previous upgrade to v2020.08.1 gave us first stage boot support on the sama5d2, but had slight multi-image breakage because the fresh giantboard support on the sama5d27 messed up the EK1 environment support: it set nv.boot.default=mmc1 in the built-in environment when none should've been set. This is fixed in v2020.09.0, which is imported here. The config changes are those of olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: version bump 2020.06.0 -> 2020.08.1Roland Hieber2020-09-151-7/+14
| | | | | | | | | | Update to the most recent barebox release, which includes our patch. CONFIG_USB_GADGET_FASTBOOT_* have been renamed to CONFIG_FASTBOOT_*, for all other new options use the default values. Tested-by: Roland Hieber <rhi@pengutronix.de> on qemu-vexpress, rpi3-b Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: barebox: version bump v2020.04.0 → v2020.06.0Ahmad Fatoum2020-06-171-2/+4
| | | | | | | | | | | | | | This allows us to drop the patch stack we had for Linux Automation MC-1 support. The series went into barebox with a fix that makes a warning about the eMMC environment go away. In return we import a single patch to address a breakage on the rpi3b platform. Being a bug fix, we should be able to drop the patch along with v2020.07.0. On the Kconfig front, CONFIG_OF_NET was dropped upstream, because it was an unreferenced symbol. All Kconfig changes are the result of an olddefconfig. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: add support for Linux Automation MC-1Ahmad Fatoum2020-04-271-1/+1
| | | | | | | | | | | | | This adds barebox support for the Linux Automation GmbH MC-1 board built around the Octavo Systems OSD32MP157C-512M SiP. The patches have been posted[1] upstream, but are not yet accepted. It's however expected for them to be part of barebox v2020.06.0, at which time we can drop the patchset again. [1]: https://lists.infradead.org/pipermail/barebox/2020-April/041653.html Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: version bump 2020.02.0 -> 2020.04.0Ahmad Fatoum2020-04-151-8/+14
| | | | | | | | | This lets us drop the am335x USB fixes, because they were already in the v2020.03.0 release. Only new enabled config option is CONFIG_USB_GADGET_FASTBOOT_CMD_OEM, which was non-configurable before. Marking it as enabled avoid a regression for people using `fastboot oem exec` Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: fix regression in AM335x USBAhmad Fatoum2020-03-051-1/+1
| | | | | | | | | | | | | | | Kernel commit 0782e8572c ("ARM: dts: Probe am335x musb with ti-sysc") which barebox pulled in during the v2020.02.0 dts/ sync moved the USB nodes to be under a ti-sysc bus instead of ti,am33xx-usb. This broke am335x USB under barebox, because the MUSB drivers couldn't cope with the now different device probe order. Import the two patches fixing this out of barebox master branch. These can be dropped when moving to barebox v2020.03.0. Fixes: 1d84e5419f50 ("v7a: barebox: version bump 2020.01.0 -> 2020.02.0") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: version bump 2020.01.0 -> 2020.02.0Ahmad Fatoum2020-02-191-1/+2
| | | | | | | | | | | | | | | | | | | | | barebox v2020.02.0 has just been released. Drop the now upstream rpi patches, oldconfig the configs and use it. As seen in the config diffs, two of our configuration options have changed with this release: CONFIG_CLOCKSOURCE_ARMV8_TIMER=y: barebox support for ARMv7 (and ARMv8) architected timers on >= ARMv7 has now been reenabled. This should improve clocksource accuracy on the rpi3 and vexpress. The name will be changed to indicate that it's not ARMv8 specific in v2020.03.0. CONFIG_DEFAULT_ENVIRONMENT=n in am335x-mlo: This symbol became selectable even without CONFIG_ENV_HANDLING. We didn't use the environment before for this configuration, so we probably don't want to start now, so this is left disabled. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* platform-v7a: barebox: version bump 2019.12.0 -> 2020.01.0Ahmad Fatoum2020-01-141-2/+4
| | | | | | | barebox v2020.01.0 has just been released. Rebase the patch stack, oldconfig the configs and use it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* platform-v7a: Add barebox patchstackSascha Hauer2020-01-081-1/+2
| | | | | | | | This adds a barebox patchstack which is needed for the rasperrypi which otherwise issues several warnings during boot. While at it add DWC2 USB support as well to finally get networking support for the raspberrypi. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* platform-v7a: barebox: version bump 2019.11.0 -> 2019.12.0DistroKit-2019.12.0Sascha Hauer2019-12-201-1/+3
| | | | | | Use the latest and greatest. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* platform-v7a: barebox: version bump 2019.10.0 -> 2019.11.0Robert Schwebel2019-11-111-3/+16
| | | | | | A new barebox version is out, use it. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* barebox: create the .ptxdist-defaultenv symlink in the build dirMichael Olbrich2019-11-041-1/+1
| | | | | | | This avoids problems if the same git tree is used in local_src/ for multiple barebox packages. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* v7a: barebox: version bump 2019.08.1 → 2019.10.0Ahmad Fatoum2019-11-041-1/+15
| | | | | | | There's a new barebox in town. Upgrade to it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-mx6: enable i.MX6 On Chip OTP controllerMichael Olbrich2019-09-191-1/+5
| | | | | | Barebox needs this to read the MAC addresse of the board. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* v7a: barebox: version bump 2019.07.0 → 2019.08.1Roland Hieber2019-08-211-3/+69
| | | | Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: barebox: version bump 2019.06.1 -> 2019.07.0Ahmad Fatoum2019-08-211-3/+7
| | | | | | | | | Particularly relevant in this release is the v5.2 device tree sync which is a prerequisite for the incoming STM32MP1 support. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Roland Hieber <rhi@pengutronix.de> Tested-by: Roland Hieber <rhi@pengutronix.de>
* v7a: barebox: version bump 2019.03.0 -> 2019.06.1Roland Hieber2019-07-091-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Just a simple oldconfig with default values for all variants with the help of ./scripts/update-diffs-v7a.sh. Changes in config symbols: * BAREBOX_MAX_PBLX_SIZE was removed in v2019.04.0 because pblx was removed. The maximum file size is now instead determined by BAREBOX_MAX_IMAGE_SIZE. [1] * The m25p80 driver was refactored to use the spi_mem API [2] (affects am355x and mx6) * The ARMv8 clocksource can now also work with ARMv7 timers, so it is auto-enabled by kconfig since barebox v2019.05.0. [3] * GPIO_BCM283X was replaced by PINCTRL_BCM283X in v2019.04.0. [4] * CRC16 was replaced by CRC_ITU_T in v2019.04.0 [5], but since it has no prompt in the menu and it is actually not selected by anyone except on am335x-mlo, it now stays disabled in the other variants. Relevant barebox commits: [1]: 9e72ea7a006cd0931913 ("images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded" [2]: 80b6b874944d7982e6c7 ("mtd: devices: m25p80: use the spi_mem_xx() API") [3]: dece707522434d5c8eb3 ("clocksource: Enable architected timer support for CPU_V7") [4]: be717102c8ba2d0ea022 ("pinctrl: bcm2835: move existing code from gpio.") [5]: 74de1afbd2ed4262d410 ("crc: import crc_itu_t() from kernel") Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: barebox-mx6: slim down config diffRoland Hieber2019-06-051-13/+27
| | | | | | | | | | | | * don't disable common features unnecessarily: enable the features BZLIB, DRIVER_SPI_GPIO, I2C_GPIO, NET_NFS, STATE, XZ_DECOMPRESS, and the commands bootz, cmp, defaultenv, sha1sum, and state. All of those are enabled in the barebox-common config too, and make sense to have on a generic barebox. * repair compile log level < default log level by using the defaults * disable unused features (CMD_MENU_MANAGEMENT) Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* platform-v7a: barebox bump v2019.01.0 → v2019.03.0Rouven Czerwinski2019-03-071-9/+12
| | | | | | Patch free, baby! Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* platform-v7a: barebox 2018.12.0 → 2019.01.0Rouven Czerwinski2019-01-181-1/+6
| | | | Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* barebox-configs: updateRobert Schwebel2019-01-081-1/+1
| | | | | | | ptxdist-2018.12.0 has a stricter understanding of barebox config files, so we need to update them in order to survive a 'ptxdist oldconfig'. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* barebox-mx6: disable state and remove boostate entriesRouven Czerwinski2018-12-071-5/+1
| | | | Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
* barebox-mx6: fix bootsource selectionRouven Czerwinski2018-12-071-2/+1
| | | | | | Also disable the bootchooser which is no longer used. Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
* platform-v7a: barebox bump v2018.05.0 → v2018.12.0Rouven Czerwinski2018-12-071-4/+34
| | | | | | | | Bump barebox from v2018.05.0 to v2018.12.0. This barebox release officially supports RPI3, this will be enabled in a later commit. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* platform-v7a: barebox-mx6: add layer supportMichael Olbrich2018-10-261-1/+1
| | | | | | Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: barebox: consistently disable netconsoleRoland Hieber2018-05-181-1/+1
| | | | | | | It is not needed and on some boards it errors when it does not find a network interface. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* platform-v7a: barebox: version bump 2018.03.0 -> 2018.05.0Roland Hieber2018-05-161-3/+10
| | | | | | | Bump all barebox variants, followed by oldconfig. Consistently enable CONSOLE_ALLOW_COLOR, otherwise use default values. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* barebox: version bump 2018.01.0 -> 2018.03.0Robert Schwebel2018-03-071-1/+7
| | | | | | Update the barebox version to the latest and greatest. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: barebox-mx6: enable i.MX I2C driverRoland Hieber2018-02-191-1/+28
| | | | | | I2C is a useful thing to have in a generic barebox image. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* platform-v7a: barebox-mx6: enable i.MX SPI driverRoland Hieber2018-02-191-1/+1
| | | | | | | SPI is a useful thing to have, especially if you want to read your barebox-env from SPI-NOR, like some boards do. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* platform-v7a: barebox: version bump 2017.11.0 -> 2018.01.0Roland Hieber2018-01-291-1/+3
| | | | | | | | | | | Migrate the patches and make oldconfig without adding any new features. Note that barebox-rpi2 is still broken, but we'll bump it anyway for completeness. Tested-by: Robert Schwebel <r.schwebel@pengutronix.de> (for qemu-vexpress) Tested-by: Roland Hieber <r.hieber@pengutronix.de> (for qemu-vexpress) Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* platform-v7a: barebox-mx6: build images for Nitrogen6 boardsRoland Hieber2018-01-221-1/+1
| | | | | | | | The Nitrogen6 family is already supported in the kernel, and has a blspec entry, but the barebox-mx6 package does not yet build an image for them. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* barebox: version bump 2017.10.0 -> 2017.11.0DistroKit-2017.11.0Robert Schwebel2017-11-131-1/+4
| | | | | | The vexpress series has been merged upstream and can be dropped. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* barebox: version bump 2017.08.0 -> 2017.10.0Robert Schwebel2017-10-111-1/+4
| | | | | Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* platform-v7a: barebox: version bump v2017.07.0 -> v2017.08.0Robert Schwebel2017-08-221-1/+1
| | | | | | Barebox upstream has version bumped, and so do we. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v72: mx6: create own mx6 barebox defaultenvChris Fiege2017-07-041-1/+1
| | | | | | | Using this change the barebox-mx6 package has its own defaultenv directory. Signed-off-by: Chris Fiege <c.fiege@pengutronix.de>
* platform-v7a: barebox: version bump 2017.06.0 -> 2017.07.0Robert Schwebel2017-07-041-0/+808
Update barebox 2017.07.0, which contains an important fix for nv and globalvars. In the previous patch stack, state was defect, as upstream has changed the oftree. This is fixed in the new patch series. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>