| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kernel commit 0782e8572c ("ARM: dts: Probe am335x musb with ti-sysc")
which barebox pulled in during the v2020.02.0 dts/ sync moved the USB nodes
to be under a ti-sysc bus instead of ti,am33xx-usb.
This broke am335x USB under barebox, because the MUSB drivers couldn't
cope with the now different device probe order.
Import the two patches fixing this out of barebox master branch.
These can be dropped when moving to barebox v2020.03.0.
Fixes: 1d84e5419f50 ("v7a: barebox: version bump 2020.01.0 -> 2020.02.0")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
barebox v2020.02.0 has just been released. Drop the now upstream
rpi patches, oldconfig the configs and use it.
As seen in the config diffs, two of our configuration options have
changed with this release:
CONFIG_CLOCKSOURCE_ARMV8_TIMER=y:
barebox support for ARMv7 (and ARMv8) architected timers on >= ARMv7
has now been reenabled. This should improve clocksource accuracy on
the rpi3 and vexpress. The name will be changed to indicate that
it's not ARMv8 specific in v2020.03.0.
CONFIG_DEFAULT_ENVIRONMENT=n in am335x-mlo:
This symbol became selectable even without CONFIG_ENV_HANDLING.
We didn't use the environment before for this configuration, so we
probably don't want to start now, so this is left disabled.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
|
|
|
|
|
|
|
| |
barebox v2020.01.0 has just been released. Rebase the patch stack,
oldconfig the configs and use it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
|
|
|
|
|
|
|
|
| |
This adds a barebox patchstack which is needed for the rasperrypi which
otherwise issues several warnings during boot. While at it add DWC2 USB
support as well to finally get networking support for the raspberrypi.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
Use the latest and greatest.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
A new barebox version is out, use it.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
|
|
|
|
|
|
|
| |
This avoids problems if the same git tree is used in local_src/ for
multiple barebox packages.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
|
|
|
|
|
|
|
| |
There's a new barebox in town. Upgrade to it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
|
|
|
|
|
|
| |
Barebox needs this to read the MAC addresse of the board.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
|
|
|
|
| |
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
|
|
|
|
|
|
|
|
|
| |
Particularly relevant in this release is the v5.2 device tree sync
which is a prerequisite for the incoming STM32MP1 support.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Tested-by: Roland Hieber <rhi@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Just a simple oldconfig with default values for all variants with the
help of ./scripts/update-diffs-v7a.sh.
Changes in config symbols:
* BAREBOX_MAX_PBLX_SIZE was removed in v2019.04.0 because pblx was
removed. The maximum file size is now instead determined by
BAREBOX_MAX_IMAGE_SIZE. [1]
* The m25p80 driver was refactored to use the spi_mem API [2] (affects
am355x and mx6)
* The ARMv8 clocksource can now also work with ARMv7 timers, so it is
auto-enabled by kconfig since barebox v2019.05.0. [3]
* GPIO_BCM283X was replaced by PINCTRL_BCM283X in v2019.04.0. [4]
* CRC16 was replaced by CRC_ITU_T in v2019.04.0 [5], but since it has no
prompt in the menu and it is actually not selected by anyone except on
am335x-mlo, it now stays disabled in the other variants.
Relevant barebox commits:
[1]: 9e72ea7a006cd0931913 ("images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded"
[2]: 80b6b874944d7982e6c7 ("mtd: devices: m25p80: use the spi_mem_xx() API")
[3]: dece707522434d5c8eb3 ("clocksource: Enable architected timer support for CPU_V7")
[4]: be717102c8ba2d0ea022 ("pinctrl: bcm2835: move existing code from gpio.")
[5]: 74de1afbd2ed4262d410 ("crc: import crc_itu_t() from kernel")
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
* don't disable common features unnecessarily: enable the features
BZLIB, DRIVER_SPI_GPIO, I2C_GPIO, NET_NFS, STATE, XZ_DECOMPRESS,
and the commands bootz, cmp, defaultenv, sha1sum, and state.
All of those are enabled in the barebox-common config too, and make
sense to have on a generic barebox.
* repair compile log level < default log level by using the defaults
* disable unused features (CMD_MENU_MANAGEMENT)
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
|
|
|
|
|
|
| |
Patch free, baby!
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
|
|
|
|
| |
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
|
|
|
|
|
|
|
| |
ptxdist-2018.12.0 has a stricter understanding of barebox config files,
so we need to update them in order to survive a 'ptxdist oldconfig'.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
|
|
|
|
| |
Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
|
|
|
|
|
|
| |
Also disable the bootchooser which is no longer used.
Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
|
|
|
|
|
|
|
|
| |
Bump barebox from v2018.05.0 to v2018.12.0.
This barebox release officially supports RPI3, this will be enabled in
a later commit.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
|
|
|
|
|
|
| |
Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
|
|
|
|
|
|
|
| |
It is not needed and on some boards it errors when it does not find a
network interface.
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
|
|
|
|
|
|
|
| |
Bump all barebox variants, followed by oldconfig. Consistently enable
CONSOLE_ALLOW_COLOR, otherwise use default values.
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
|
|
|
|
|
|
| |
Update the barebox version to the latest and greatest.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
|
|
|
|
|
|
| |
I2C is a useful thing to have in a generic barebox image.
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
|
|
|
|
|
|
|
| |
SPI is a useful thing to have, especially if you want to read your
barebox-env from SPI-NOR, like some boards do.
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
| |
Migrate the patches and make oldconfig without adding any new features.
Note that barebox-rpi2 is still broken, but we'll bump it anyway for
completeness.
Tested-by: Robert Schwebel <r.schwebel@pengutronix.de> (for qemu-vexpress)
Tested-by: Roland Hieber <r.hieber@pengutronix.de> (for qemu-vexpress)
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
|
|
|
|
|
|
|
|
| |
The Nitrogen6 family is already supported in the kernel, and has a
blspec entry, but the barebox-mx6 package does not yet build an image
for them.
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
|
|
|
|
|
|
| |
The vexpress series has been merged upstream and can be dropped.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
|
|
|
|
|
|
| |
Barebox upstream has version bumped, and so do we.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
|
|
|
|
|
|
|
| |
Using this change the barebox-mx6 package has its own defaultenv
directory.
Signed-off-by: Chris Fiege <c.fiege@pengutronix.de>
|
|
Update barebox 2017.07.0, which contains an important fix for nv and
globalvars.
In the previous patch stack, state was defect, as upstream has changed
the oftree. This is fixed in the new patch series.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
|