summaryrefslogtreecommitdiffstats
path: root/configs/platform-v7a/rules
Commit message (Collapse)AuthorAgeFilesLines
* v7a: generate image for sama5d27 SOM1 Evaluation KitAhmad Fatoum2020-11-012-0/+72
| | | | | | | | | | With the previous barebox and kernel changes, we can combine it with the DistroKit-v7a rootfs to get an image to boot on the sama5d27-som1-ek. Do this. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> [rebased to master] Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* v7a: barebox: add new rule for sama5d2 supportAhmad Fatoum2020-11-011-0/+108
| | | | | | | | | | | | | Later commits will have the v7a platform generate an image for Cortex-A5 based sama5d2 as well. Import here a new barebox-at91 rule that extends the barebox-common rule to provide support for the two sama5d27 boards supported by barebox: barebox-sama5d27-som1-ek.img barebox-sama5d27-som1-ek-xload-mmc.img barebox-groboards-sama5d27-giantboard.img barebox-groboards-sama5d27-giantboard-xload-mmc.img Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: generate image for Linux Automation MC-1Ahmad Fatoum2020-04-272-0/+71
| | | | | | | With TF-A and barebox support added in previous commits, everything is now in place for having DistroKit generate a MC-1 rootfs image. Do so. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: add support for Linux Automation MC-1Ahmad Fatoum2020-04-271-1/+2
| | | | | | | | | | | | | This adds barebox support for the Linux Automation GmbH MC-1 board built around the Octavo Systems OSD32MP157C-512M SiP. The patches have been posted[1] upstream, but are not yet accepted. It's however expected for them to be part of barebox v2020.06.0, at which time we can drop the patchset again. [1]: https://lists.infradead.org/pipermail/barebox/2020-April/041653.html Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* remove more references to nonexisting CREDITS fileRoland Hieber2020-03-092-4/+0
| | | | | | Fixes: 3dd5c0fe34cee8ebbcdd ("rules: remove CREDIT lines") Fixes: 3bce747e47170b219334 ("v7a: add stm32mp157c-dk2 SD-Card image") Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* rules: remove CREDIT linesRoland Hieber2020-03-0518-36/+0
| | | | | | | | This file has never existed here, and the respective lines were also removed from the upstream PTXdist rules and templates in commit cbd6bda680c65d7e01cf ("CREDITS: remove unmaintained file"). Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: add stm32mp157c-dk2 SD-Card imageAhmad Fatoum2020-03-052-0/+74
| | | | | | | | Both STM32MP BootROM and TF-A expect the subsequent bootloader stage to come from a GPT partition when booting from SD-Card. Add a genimage config that describes this. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* v7a: barebox: add new stm32mp ruleAhmad Fatoum2020-03-051-0/+107
| | | | | | | | | | | | Since v2019.12.0, barebox now has SD/MMC and Ethernet support for the STM32MP1. Thus there is nothing holding us back from extending DistroKit's v7a platform to support the SoC. Add a barebox-stm32mp rule as first step. The barebox rule add here is only meant as second-stage bootloader (SSBL). First-stage (FSBL) will be TF-A introduced in a later patch. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
* barebox: create the .ptxdist-defaultenv symlink in the build dirMichael Olbrich2019-11-044-8/+8
| | | | | | | This avoids problems if the same git tree is used in local_src/ for multiple barebox packages. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-vexpress: remove installed filesMichael Olbrich2019-11-041-0/+2
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-am335x-mlo: actually remove images during 'clean'Michael Olbrich2019-11-041-1/+1
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-rpi2: don't add a suffix to the imagesMichael Olbrich2019-11-041-1/+1
| | | | | | It's not needed and now the files are actually removed during 'clean'. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-mx6: actually remove images during 'clean'Michael Olbrich2019-11-041-1/+1
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-am335x: actually remove images during 'clean'Michael Olbrich2019-11-041-1/+1
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-am335x-mlo: sync with latest barebox templateMichael Olbrich2019-11-041-21/+20
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-am335x: sync with latest barebox templateMichael Olbrich2019-11-041-25/+26
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-common: sync with latest barebox templateMichael Olbrich2019-11-041-25/+28
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-rpi2: sync with latest barebox templateMichael Olbrich2019-11-041-20/+21
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-mx6: sync with latest barebox templateMichael Olbrich2019-11-041-20/+21
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-vexpress: sync with latest barebox templateMichael Olbrich2019-11-041-22/+23
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* v7a: barebox-common: modify oldconfig to affect all bareboxesAhmad Fatoum2019-11-041-1/+4
| | | | | | | | | With barebox updates, oldconfig needs to be rerun for every barebox in the BSP, to resync the configs. With this change this can be done at once by issuing a ptxdist oldconfig barebox-common. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: add support for Nitrogen6 MAXMichael Olbrich2019-09-191-0/+36
| | | | Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* v7a: bareboxes: use config diffs with the common reference configRoland Hieber2019-06-054-0/+4
| | | | | | | | | | | | | | Make it easier to maintain a common set of features and also review the device-specific changes between all the barebox variants by using the config diff mechanism which has been available since PTXdist 2019.01.0. No barebox config was harmed in the making of this patch, only their difference to the common reference config was computed. Also add a helper script to regenerate the config diffs after the common config was changed. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: bareboxes: use shared settings from the barebox-common packageRoland Hieber2019-06-055-10/+10
| | | | | | | | | | | As implemented in the previous commit, the barebox version and MD5 can be reduced to one entry in the menu. Also do the same for the host-lzop dependency, which will be needed for every barebox package when using the common reference config. Be sure to depend on the new barebox-common package so the barebox packages are rebuilt when the version and MD5 variables change. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* v7a: barebox-common: add a common reference config for all barebox variantsRoland Hieber2019-06-051-0/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This package serves multiple purposes: * Make the barebox version and MD5 for all used barebox variants configurable with just one menu entry. * Have a common barebox configuration with a baseline feature set, which can be used by all barebox-* variants as a reference config with the config diff functionality introduced in PTXdist 2019.01.0. The common config is currently based on ARCH_BCM283X, which seems to generate the smallest config diff for all the existing device-specific barebox configs (which will be adapted in the next commits). The new barebox-common package only exists for the ability to call "ptxdist menuconfig" on it in order to change the common config. It isn't meant to build or install anything, so the compile, install and targetinstall stages can be no-ops. Also make sure that the menu entry for the common configuration is listed before all other barebox variants by naming the kconfig file appriopriately. Since the barebox-common config uses LZO image compression, depend on host-lzop too. Then configure it to use the version which is currently used for all other variants in the v7a platform. Signed-off-by: Roland Hieber <rhi@pengutronix.de>
* platform-v7a: barebox bump v2019.01.0 → v2019.03.0Rouven Czerwinski2019-03-075-10/+10
| | | | | | Patch free, baby! Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* platform-v7a: barebox 2018.12.0 → 2019.01.0Rouven Czerwinski2019-01-185-10/+10
| | | | Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* add RPI3 SupportRouven Czerwinski2018-12-174-1/+91
| | | | Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
* platform-v7a: barebox bump v2018.05.0 → v2018.12.0Rouven Czerwinski2018-12-075-10/+10
| | | | | | | | Bump barebox from v2018.05.0 to v2018.12.0. This barebox release officially supports RPI3, this will be enabled in a later commit. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* platform-v7a: barebox-am335x-mlo: add layer supportMichael Olbrich2018-10-261-1/+1
| | | | | | Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: barebox-vexpress: add layer supportMichael Olbrich2018-10-261-1/+7
| | | | | | Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: image-rpi2: add layer supportMichael Olbrich2018-10-261-6/+7
| | | | | | Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: barebox-rpi2: add layer supportMichael Olbrich2018-10-261-1/+7
| | | | | | Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: barebox-mx6: add layer supportMichael Olbrich2018-10-261-1/+7
| | | | | | Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: barebox-am335x: add layer supportMichael Olbrich2018-10-261-1/+7
| | | | | | Remove all references to PTXDIST_PLATFORMCONFIGDIR to do this. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform: v7a: Remove no longer needed make ruleAlexander Dahl2018-10-231-49/+0
| | | | | | | | | That one was used before renaming the platform to v7a, and later reintroducing support for Raspberry Pi 2. The package is not activated anymore and so there's no need to overwrite the rule from ptxdist itself anymore. Signed-off-by: Alexander Dahl <ada@thorsis.com>
* platform-v7a: barebox: version bump 2018.03.0 -> 2018.05.0Roland Hieber2018-05-165-10/+10
| | | | | | | Bump all barebox variants, followed by oldconfig. Consistently enable CONSOLE_ALLOW_COLOR, otherwise use default values. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* barebox: version bump 2018.01.0 -> 2018.03.0Robert Schwebel2018-03-075-10/+10
| | | | | | Update the barebox version to the latest and greatest. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* barebox-vexpress: update to latest template changesMichael Olbrich2018-02-181-5/+11
| | | | | | This fixes 'ptxdist clean root' and the wrapper blacklist. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-rpi2: update to latest template changesMichael Olbrich2018-02-181-5/+11
| | | | | | This fixes 'ptxdist clean root' and the wrapper blacklist. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-mx6: update to latest template changesMichael Olbrich2018-02-181-5/+11
| | | | | | This fixes 'ptxdist clean root' and the wrapper blacklist. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-am335x: update to latest template changesMichael Olbrich2018-02-181-5/+11
| | | | | | This fixes 'ptxdist clean root' and the wrapper blacklist. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* barebox-am335x-mlo: update to latest template changesMichael Olbrich2018-02-181-8/+11
| | | | | | This fixes 'ptxdist clean root' and the wrapper blacklist. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
* platform-v7a: barebox: version bump 2017.11.0 -> 2018.01.0Roland Hieber2018-01-295-10/+10
| | | | | | | | | | | Migrate the patches and make oldconfig without adding any new features. Note that barebox-rpi2 is still broken, but we'll bump it anyway for completeness. Tested-by: Robert Schwebel <r.schwebel@pengutronix.de> (for qemu-vexpress) Tested-by: Roland Hieber <r.hieber@pengutronix.de> (for qemu-vexpress) Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* platform-v7a: barebox-mx6: build images for Nitrogen6 boardsRoland Hieber2018-01-221-0/+3
| | | | | | | | The Nitrogen6 family is already supported in the kernel, and has a blspec entry, but the barebox-mx6 package does not yet build an image for them. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
* barebox: version bump 2017.10.0 -> 2017.11.0DistroKit-2017.11.0Robert Schwebel2017-11-135-10/+10
| | | | | | The vexpress series has been merged upstream and can be dropped. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* platform-v7a: silence reason-warning for barebox state dtb entryRobert Schwebel2017-10-271-1/+1
| | | | | | | | | | | As the 'reason' checker analyzes all <*>.dtb files in the imagedir and assumes they are all kernel dtbs, rename the barebox dtb from bb-vexpress-v2p-ca9.dtb to vexpress-v2p-ca9.dtb-bb. This silences a warning that kernel devicetrees should not contain barebox,state nodes. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
* barebox: version bump 2017.08.0 -> 2017.10.0Robert Schwebel2017-10-115-10/+10
| | | | | Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* platform-v7a: barebox: use reworked vexpress patchesRobert Schwebel2017-10-111-3/+3
| | | | | | | The vexpress patch series has recently been reworked. Use it. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
* platform-v7a: add support for Boundary Devices Nitrogen6x boardRoland Hieber2017-08-241-0/+38
| | | | | | | Build its devicetree and add a bootloader entry. Signed-off-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-30 09:57:14 +0000