ARM: i.MX8MM: innocomm-wb15: switch to upstream DT

The same DTs we have in barebox have made it upstream with very minor
differences, so drop the copies inside barebox.

No functional change intended.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.barebox.org/20240220123215.3758465-1-a.fatoum@pengutronix.de
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 1 insertions, 629 deletions

diff --git a/arch/arm/dts/imx8mm-innocomm-wb15-evk-upstream.dts b/arch/arm/dts/imx8mm-innocomm-wb15-evk-upstream.dts
deleted file mode 100644
index 0a28e7ceab..0000000000
--- a/arch/arm/dts/imx8mm-innocomm-wb15-evk-upstream.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018 Bang & Olufsen
- * Copyright 2022 Pengutronix
- */
-
-/dts-v1/;
-
-#include "imx8mm-innocomm-wb15.dtsi"
-
-/ {
-	model = "InnoComm WB15-EVK";
-	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-		status = "okay";
-
-		led-0 {
-			label = "debug";
-			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	reg_vsd_3v3: regulator-vsd-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_ethphy: regulator-eth-phy {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fec_phy_reg>;
-		regulator-name = "PHY_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0x1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fec_phy>;
-			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			phy-supply = <&reg_ethphy>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	samsung,picophy-pre-emp-curr-control = <3>;
-	samsung,picophy-dc-vol-level-adjust = <7>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	samsung,picophy-pre-emp-curr-control = <3>;
-	samsung,picophy-dc-vol-level-adjust = <7>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_vsd_3v3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03
-			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-		>;
-	};
-
-	pinctrl_fec_phy: fecphygrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
-		>;
-	};
-
-	pinctrl_fec_phy_reg: fecphyreggrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x16
-		>;
-	};
-
-	pinctrl_gpio_leds: led_grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0xd6
-		>;
-	};
-
-	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
-		>;
-	};
-};
diff --git a/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts b/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts
index 907d9c96ba..ac7e5a1cb1 100644
--- a/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts
+++ b/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts
@@ -2,7 +2,7 @@
 
 /dts-v1/;
 
-#include "imx8mm-innocomm-wb15-evk-upstream.dts"
+#include <arm64/freescale/imx8mm-innocomm-wb15-evk.dts>
 
 / {
 	chosen {
diff --git a/arch/arm/dts/imx8mm-innocomm-wb15.dtsi b/arch/arm/dts/imx8mm-innocomm-wb15.dtsi
deleted file mode 100644
index 7e25450362..0000000000
--- a/arch/arm/dts/imx8mm-innocomm-wb15.dtsi
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018 Bang & Olufsen
- */
-
-#include <arm64/freescale/imx8mm.dtsi>
-#include "imx8mm.dtsi"
-#include <dt-bindings/phy/phy-imx8-pcie.h>
-
-/ {
-	reg_modem: regulator-modem {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_modem_regulator>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "epdev_on";
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_3v3_out: regulator-3v3-out {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3_OUT";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&cpu_alert0 {
-	temperature = <95000>;
-};
-
-&cpu_crit0 {
-	temperature = <105000>;
-};
-
-&ddrc {
-	operating-points-v2 = <&ddrc_opp_table>;
-
-	ddrc_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-25000000 {
-			opp-hz = /bits/ 64 <25000000>;
-		};
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic@4b {
-		compatible = "rohm,bd71847";
-		reg = <0x4b>;
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 GPIO_ACTIVE_LOW>;
-		rohm,reset-snvs-powered;
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <850000>;
-				rohm,dvs-idle-voltage = <850000>;
-				rohm,dvs-suspend-voltage = <850000>;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "buck2";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <900000>;
-			};
-
-			buck3_reg: BUCK3 {
-				// buck5 in datasheet
-				regulator-name = "buck3";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				// buck6 in datasheet
-				regulator-name = "buck4";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				// buck7 in datasheet
-				regulator-name = "buck5";
-				regulator-min-microvolt = <1605000>;
-				regulator-max-microvolt = <1995000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				// buck8 in datasheet
-				regulator-name = "buck6";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "ldo6";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&pcie_phy {
-	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
-	fsl,tx-deemph-gen1 = <0x2d>;
-	fsl,tx-deemph-gen2 = <0xf>;
-	status = "okay";
-};
-
-&pcie0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie0>;
-	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>,
-		 <&clk IMX8MM_CLK_PCIE1_AUX>;
-	clock-names = "pcie", "pcie_bus", "pcie_aux";
-	fsl,max-link-speed = <1>;
-	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
-	assigned-clock-rates = <10000000>, <250000000>;
-	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
-	status = "okay";
-};
-
-&uart1 { /* BT */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
-	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4349-bt";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_modem_bt>;
-		device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-		vbat-supply = <&reg_3v3_out>;
-		vddio-supply = <&reg_3v3_out>;
-		clocks = <&osc_32k>;
-		max-speed = <3000000>;
-		clock-names = "extclk";
-	};
-};
-
-&uart2 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	no-sd;
-	no-sdio;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	bus-width = <4>;
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&A53_0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_1 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_2 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&A53_3 {
-	cpu-supply = <&buck2_reg>;
-};
-
-/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
-
-&iomuxc {
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL	0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA	0x400001c3
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c3
-			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c3
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
-			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
-		>;
-	};
-
-	pinctrl_i2c3: i2c3-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
-			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
-			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
-		>;
-	};
-
-	pinctrl_pcie0: pcie0-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61
-			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x6
-		>;
-	};
-
-	pinctrl_modem_bt: modembt-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
-			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x19
-			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
-			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19
-			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
-		>;
-	};
-
-	pinctrl_modem_regulator: modemreg-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x41
-		>;
-	};
-
-	pinctrl_pmic: pmicirq-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
-			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
-			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
-			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
-		>;
-	};
-
-	pinctrl_uart2: uart2-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000190
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
-			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
-			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
-			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
-			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
-			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
-			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000194
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
-			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
-			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
-			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
-			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
-			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
-			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d4
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000196
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
-			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
-			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
-			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
-			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
-			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
-			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d6
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_wdog: wdog-grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
-		>;
-	};
-};