dts: update to v6.2-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2078 files changed, 78326 insertions, 24462 deletions

diff --git a/arch/arm/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/dts/socfpga_arria10_mercury_aa1.dts
index e225b8883a..53ca8fd82c 100644
--- a/arch/arm/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/dts/socfpga_arria10_mercury_aa1.dts
@@ -20,7 +20,7 @@
 };
 
 // provide reset-names until fixed in the upstream dts. Binding prescribes this property.
-&{/soc/dwmmc0@ff808000} {
+&{/soc/mmc@ff808000} {
 	reset-names = "reset";
 };
 
diff --git a/dts/Bindings/arm/amlogic.yaml b/dts/Bindings/arm/amlogic.yaml
index 9fda2436c6..e16b5fa558 100644
--- a/dts/Bindings/arm/amlogic.yaml
+++ b/dts/Bindings/arm/amlogic.yaml
@@ -163,6 +163,7 @@ properties:
               - azw,gsking-x
               - azw,gtking
               - azw,gtking-pro
+              - hardkernel,odroid-go-ultra
               - hardkernel,odroid-n2
               - hardkernel,odroid-n2-plus
               - khadas,vim3
diff --git a/dts/Bindings/arm/apple.yaml b/dts/Bindings/arm/apple.yaml
index 7262f3c098..da78c69774 100644
--- a/dts/Bindings/arm/apple.yaml
+++ b/dts/Bindings/arm/apple.yaml
@@ -19,12 +19,14 @@ description: |
   - MacBook Air (M1, 2020)
   - iMac (24-inch, M1, 2021)
 
-  And devices based on the "M1 Pro" and "M1 Max" SoCs:
+  And devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs:
 
   - MacBook Pro (14-inch, M1 Pro, 2021)
   - MacBook Pro (14-inch, M1 Max, 2021)
   - MacBook Pro (16-inch, M1 Pro, 2021)
   - MacBook Pro (16-inch, M1 Max, 2021)
+  - Mac Studio (M1 Max, 2022)
+  - Mac Studio (M1 Ultra, 2022)
 
   The compatible property should follow this format:
 
@@ -67,6 +69,7 @@ properties:
               - apple,j457 # iMac (24-inch, 2x USB-C, M1, 2021)
           - const: apple,t8103
           - const: apple,arm-platform
+
       - description: Apple M1 Pro SoC based platforms
         items:
           - enum:
@@ -74,14 +77,23 @@ properties:
               - apple,j316s # MacBook Pro (16-inch, M1 Pro, 2021)
           - const: apple,t6000
           - const: apple,arm-platform
+
       - description: Apple M1 Max SoC based platforms
         items:
           - enum:
               - apple,j314c # MacBook Pro (14-inch, M1 Max, 2021)
               - apple,j316c # MacBook Pro (16-inch, M1 Max, 2021)
+              - apple,j375c # Mac Studio (M1 Max, 2022)
           - const: apple,t6001
           - const: apple,arm-platform
 
+      - description: Apple M1 Ultra SoC based platforms
+        items:
+          - enum:
+              - apple,j375d # Mac Studio (M1 Ultra, 2022)
+          - const: apple,t6002
+          - const: apple,arm-platform
+
 additionalProperties: true
 
 ...
diff --git a/dts/Bindings/arm/aspeed/aspeed.yaml b/dts/Bindings/arm/aspeed/aspeed.yaml
index 217a1d6748..73f272664e 100644
--- a/dts/Bindings/arm/aspeed/aspeed.yaml
+++ b/dts/Bindings/arm/aspeed/aspeed.yaml
@@ -17,6 +17,7 @@ properties:
       - description: AST2400 based boards
         items:
           - enum:
+              - delta,ahe50dc-bmc
               - facebook,galaxy100-bmc
               - facebook,wedge100-bmc
               - facebook,wedge40-bmc
@@ -82,7 +83,7 @@ properties:
               - ibm,tacoma-bmc
               - inventec,transformer-bmc
               - jabil,rbp-bmc
-              - nuvia,dc-scm-bmc
+              - qcom,dc-scm-v1-bmc
               - quanta,s6q-bmc
           - const: aspeed,ast2600
 
diff --git a/dts/Bindings/arm/bcm/bcm2835.yaml b/dts/Bindings/arm/bcm/bcm2835.yaml
index 8051a75c2c..162a39dab2 100644
--- a/dts/Bindings/arm/bcm/bcm2835.yaml
+++ b/dts/Bindings/arm/bcm/bcm2835.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings
+title: Broadcom BCM2711/BCM2835 Platforms
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
diff --git a/dts/Bindings/arm/bcm/brcm,bcm11351.yaml b/dts/Bindings/arm/bcm/brcm,bcm11351.yaml
index c603243574..f2bcac0096 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm11351.yaml
+++ b/dts/Bindings/arm/bcm/brcm,bcm11351.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM11351 device tree bindings
+title: Broadcom BCM11351
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/dts/Bindings/arm/bcm/brcm,bcm21664.yaml b/dts/Bindings/arm/bcm/brcm,bcm21664.yaml
index b302075738..cf4e254e32 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm21664.yaml
+++ b/dts/Bindings/arm/bcm/brcm,bcm21664.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM21664 device tree bindings
+title: Broadcom BCM21664
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/dts/Bindings/arm/bcm/brcm,bcm23550.yaml b/dts/Bindings/arm/bcm/brcm,bcm23550.yaml
index 37f3a6fcde..eafec29ba7 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm23550.yaml
+++ b/dts/Bindings/arm/bcm/brcm,bcm23550.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM23550 device tree bindings
+title: Broadcom BCM23550
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/dts/Bindings/arm/bcm/brcm,bcm4708.yaml b/dts/Bindings/arm/bcm/brcm,bcm4708.yaml
index 958df32b48..454b0e9324 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/dts/Bindings/arm/bcm/brcm,bcm4708.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM4708 device tree bindings
+title: Broadcom BCM4708
 
 description:
   Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
@@ -66,6 +66,7 @@ properties:
           - enum:
               - asus,rt-ac88u
               - dlink,dir-885l
+              - dlink,dir-890l
               - linksys,panamera
               - luxul,abr-4500-v1
               - luxul,xap-1610-v1
@@ -97,6 +98,7 @@ properties:
       - description: BCM53016 based boards
         items:
           - enum:
+              - dlink,dwl-8610ap
               - meraki,mr32
           - const: brcm,bcm53016
           - const: brcm,bcm4708
diff --git a/dts/Bindings/arm/bcm/brcm,bcmbca.yaml b/dts/Bindings/arm/bcm/brcm,bcmbca.yaml
index 84866e29ca..07892cbdd2 100644
--- a/dts/Bindings/arm/bcm/brcm,bcmbca.yaml
+++ b/dts/Bindings/arm/bcm/brcm,bcmbca.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Broadband SoC device tree bindings
+title: Broadcom Broadband SoC
 
 description:
   Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless
diff --git a/dts/Bindings/arm/bcm/brcm,cygnus.yaml b/dts/Bindings/arm/bcm/brcm,cygnus.yaml
index 432ccf990f..a0a3f32db5 100644
--- a/dts/Bindings/arm/bcm/brcm,cygnus.yaml
+++ b/dts/Bindings/arm/bcm/brcm,cygnus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Cygnus device tree bindings
+title: Broadcom Cygnus
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/dts/Bindings/arm/bcm/brcm,hr2.yaml b/dts/Bindings/arm/bcm/brcm,hr2.yaml
index 294948399f..cc6add0e93 100644
--- a/dts/Bindings/arm/bcm/brcm,hr2.yaml
+++ b/dts/Bindings/arm/bcm/brcm,hr2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Hurricane 2 device tree bindings
+title: Broadcom Hurricane 2
 
 description:
   Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
diff --git a/dts/Bindings/arm/bcm/brcm,ns2.yaml b/dts/Bindings/arm/bcm/brcm,ns2.yaml
index c4847abbec..6696598eca 100644
--- a/dts/Bindings/arm/bcm/brcm,ns2.yaml
+++ b/dts/Bindings/arm/bcm/brcm,ns2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom North Star 2 (NS2) device tree bindings
+title: Broadcom North Star 2 (NS2)
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/dts/Bindings/arm/bcm/brcm,nsp.yaml b/dts/Bindings/arm/bcm/brcm,nsp.yaml
index 7d184ba7d1..a43b2d4d93 100644
--- a/dts/Bindings/arm/bcm/brcm,nsp.yaml
+++ b/dts/Bindings/arm/bcm/brcm,nsp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Northstar Plus device tree bindings
+title: Broadcom Northstar Plus
 
 description:
   Broadcom Northstar Plus family of SoCs are used for switching control
diff --git a/dts/Bindings/arm/bcm/brcm,stingray.yaml b/dts/Bindings/arm/bcm/brcm,stingray.yaml
index c638e04eba..c6ccb78aab 100644
--- a/dts/Bindings/arm/bcm/brcm,stingray.yaml
+++ b/dts/Bindings/arm/bcm/brcm,stingray.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Stingray device tree bindings
+title: Broadcom Stingray
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/dts/Bindings/arm/bcm/brcm,vulcan-soc.yaml b/dts/Bindings/arm/bcm/brcm,vulcan-soc.yaml
index 4eba182abd..3f441352fb 100644
--- a/dts/Bindings/arm/bcm/brcm,vulcan-soc.yaml
+++ b/dts/Bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Vulcan device tree bindings
+title: Broadcom Vulcan
 
 maintainers:
   - Robert Richter <rrichter@marvell.com>
diff --git a/dts/Bindings/arm/cci-control-port.yaml b/dts/Bindings/arm/cci-control-port.yaml
index c911486621..c29d250a6d 100644
--- a/dts/Bindings/arm/cci-control-port.yaml
+++ b/dts/Bindings/arm/cci-control-port.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/cci-control-port.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CCI Interconnect Bus Masters binding
+title: CCI Interconnect Bus Masters
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml
index 5c13b73e4d..01b5a9c689 100644
--- a/dts/Bindings/arm/cpus.yaml
+++ b/dts/Bindings/arm/cpus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/cpus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM CPUs bindings
+title: ARM CPUs
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
@@ -178,11 +178,13 @@ properties:
       - qcom,kryo250
       - qcom,kryo260
       - qcom,kryo280
+      - qcom,kryo360
       - qcom,kryo385
       - qcom,kryo468
       - qcom,kryo485
       - qcom,kryo560
       - qcom,kryo570
+      - qcom,kryo660
       - qcom,kryo685
       - qcom,kryo780
       - qcom,scorpion
diff --git a/dts/Bindings/arm/firmware/linaro,optee-tz.yaml b/dts/Bindings/arm/firmware/linaro,optee-tz.yaml
index 9a426110a1..d4dc0749f9 100644
--- a/dts/Bindings/arm/firmware/linaro,optee-tz.yaml
+++ b/dts/Bindings/arm/firmware/linaro,optee-tz.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/firmware/linaro,optee-tz.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OP-TEE Device Tree Bindings
+title: OP-TEE
 
 maintainers:
   - Jens Wiklander <jens.wiklander@linaro.org>
diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml
index fbfc4f99c0..05b5276a0e 100644
--- a/dts/Bindings/arm/fsl.yaml
+++ b/dts/Bindings/arm/fsl.yaml
@@ -520,6 +520,7 @@ properties:
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,aura2
               - kobo,tolino-shine2hd
               - kobo,tolino-shine3
               - kobo,tolino-vision5
@@ -814,6 +815,7 @@ properties:
           - enum:
               - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
               - boundary,imx8mm-nitrogen8mm  # i.MX8MM Nitrogen Board
+              - cloos,imx8mm-phg          # i.MX8MM Cloos PHG Board
               - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
               - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
@@ -825,6 +827,7 @@ properties:
               - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
+              - innocomm,wb15-evk         # i.MX8MM Innocomm EVK board with WB15 SoM
               - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
               - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
               - menlo,mx8menlo            # i.MX8MM Menlo board with Verdin SoM
@@ -1067,6 +1070,18 @@ properties:
               - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
           - const: fsl,imx93
 
+      - description: i.MXRT1050 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1050-evk         # i.MXRT1050 EVK Board
+          - const: fsl,imxrt1050
+
+      - description: i.MXRT1170 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1170-evk         # i.MXRT1170 EVK Board
+          - const: fsl,imxrt1170
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
diff --git a/dts/Bindings/arm/hisilicon/hisilicon.yaml b/dts/Bindings/arm/hisilicon/hisilicon.yaml
index b384580229..5408763220 100644
--- a/dts/Bindings/arm/hisilicon/hisilicon.yaml
+++ b/dts/Bindings/arm/hisilicon/hisilicon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hisilicon Platforms Device Tree Bindings
+title: Hisilicon Platforms
 
 maintainers:
   - Wei Xu <xuwei5@hisilicon.com>
diff --git a/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml b/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml
index 5cbcacaeb4..ff378d5cbd 100644
--- a/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml
+++ b/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common K3 TI-SCI bindings
+title: Common K3 TI-SCI
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/dts/Bindings/arm/keystone/ti,sci.yaml b/dts/Bindings/arm/keystone/ti,sci.yaml
index 34f5f877d4..91b96065f7 100644
--- a/dts/Bindings/arm/keystone/ti,sci.yaml
+++ b/dts/Bindings/arm/keystone/ti,sci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI controller device node bindings
+title: TI-SCI controller
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/dts/Bindings/arm/marvell/armada-7k-8k.yaml b/dts/Bindings/arm/marvell/armada-7k-8k.yaml
index e9bf305452..52d78521e4 100644
--- a/dts/Bindings/arm/marvell/armada-7k-8k.yaml
+++ b/dts/Bindings/arm/marvell/armada-7k-8k.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/marvell/armada-7k-8k.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell Armada 7K/8K Platforms Device Tree Bindings
+title: Marvell Armada 7K/8K Platforms
 
 maintainers:
   - Gregory CLEMENT <gregory.clement@bootlin.com>
diff --git a/dts/Bindings/arm/mediatek.yaml b/dts/Bindings/arm/mediatek.yaml
index d76ce4c381..2275e5d937 100644
--- a/dts/Bindings/arm/mediatek.yaml
+++ b/dts/Bindings/arm/mediatek.yaml
@@ -58,6 +58,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt6795-evb
+              - sony,xperia-m5
           - const: mediatek,mt6795
       - items:
           - enum:
@@ -83,6 +84,7 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - bananapi,bpi-r3
               - mediatek,mt7986a-rfb
           - const: mediatek,mt7986a
       - items:
diff --git a/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml b/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml
index eb451bec23..0711f1834f 100644
--- a/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/dts/Bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -32,14 +32,26 @@ properties:
               - mediatek,mt8183-mmsys
               - mediatek,mt8186-mmsys
               - mediatek,mt8192-mmsys
-              - mediatek,mt8195-mmsys
               - mediatek,mt8365-mmsys
           - const: syscon
+
+      - description: vdosys0 and vdosys1 are 2 display HW pipelines,
+                     so mt8195 binding should be deprecated.
+        deprecated: true
+        items:
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
       - items:
           - const: mediatek,mt7623-mmsys
           - const: mediatek,mt2701-mmsys
           - const: syscon
 
+      - items:
+          - const: mediatek,mt8195-vdosys0
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
   reg:
     maxItems: 1
 
diff --git a/dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml
index 84fb0a146b..5c223cb063 100644
--- a/dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml
+++ b/dts/Bindings/arm/mediatek/mediatek,mt7622-wed.yaml
@@ -29,6 +29,38 @@ properties:
   interrupts:
     maxItems: 1
 
+  memory-region:
+    items:
+      - description: firmware EMI region
+      - description: firmware ILM region
+      - description: firmware DLM region
+      - description: firmware CPU DATA region
+      - description: firmware BOOT region
+
+  memory-region-names:
+    items:
+      - const: wo-emi
+      - const: wo-ilm
+      - const: wo-dlm
+      - const: wo-data
+      - const: wo-boot
+
+  mediatek,wo-ccif:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: mediatek wed-wo controller interface.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-wed
+    then:
+      properties:
+        memory-region-names: false
+        memory-region: false
+        mediatek,wo-ccif: false
+
 required:
   - compatible
   - reg
@@ -49,3 +81,23 @@ examples:
         interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
       };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      wed@15010000 {
+        compatible = "mediatek,mt7986-wed", "syscon";
+        reg = <0 0x15010000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+
+        memory-region = <&wo_emi>, <&wo_ilm>, <&wo_dlm>,
+                        <&wo_data>, <&wo_boot>;
+        memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+                              "wo-data", "wo-boot";
+        mediatek,wo-ccif = <&wo_ccif0>;
+      };
+    };
diff --git a/dts/Bindings/arm/mrvl/mrvl.yaml b/dts/Bindings/arm/mrvl/mrvl.yaml
index d581161361..4c43eaf363 100644
--- a/dts/Bindings/arm/mrvl/mrvl.yaml
+++ b/dts/Bindings/arm/mrvl/mrvl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mrvl/mrvl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell Platforms Device Tree Bindings
+title: Marvell Platforms
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/dts/Bindings/arm/msm/qcom,llcc.yaml b/dts/Bindings/arm/msm/qcom,llcc.yaml
index 5ea506412b..38efcad56d 100644
--- a/dts/Bindings/arm/msm/qcom,llcc.yaml
+++ b/dts/Bindings/arm/msm/qcom,llcc.yaml
@@ -31,6 +31,7 @@ properties:
       - qcom,sm8250-llcc
       - qcom,sm8350-llcc
       - qcom,sm8450-llcc
+      - qcom,sm8550-llcc
 
   reg:
     items:
diff --git a/dts/Bindings/arm/mstar/mstar.yaml b/dts/Bindings/arm/mstar/mstar.yaml
index 8892eb6bd3..937059fcc7 100644
--- a/dts/Bindings/arm/mstar/mstar.yaml
+++ b/dts/Bindings/arm/mstar/mstar.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mstar/mstar.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MStar platforms device tree bindings
+title: MStar platforms
 
 maintainers:
   - Daniel Palmer <daniel@thingy.jp>
diff --git a/dts/Bindings/arm/npcm/npcm.yaml b/dts/Bindings/arm/npcm/npcm.yaml
index 43409e5721..6871483947 100644
--- a/dts/Bindings/arm/npcm/npcm.yaml
+++ b/dts/Bindings/arm/npcm/npcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/npcm/npcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NPCM Platforms Device Tree Bindings
+title: NPCM Platforms
 
 maintainers:
   - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
diff --git a/dts/Bindings/arm/nxp/lpc32xx.yaml b/dts/Bindings/arm/nxp/lpc32xx.yaml
index 214c97bc30..f1bd6f50e7 100644
--- a/dts/Bindings/arm/nxp/lpc32xx.yaml
+++ b/dts/Bindings/arm/nxp/lpc32xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC32xx Platforms Device Tree Bindings
+title: NXP LPC32xx Platforms
 
 maintainers:
   - Roland Stigge <stigge@antcom.de>
diff --git a/dts/Bindings/arm/qcom-soc.yaml b/dts/Bindings/arm/qcom-soc.yaml
new file mode 100644
index 0000000000..e333ec4a9c
--- /dev/null
+++ b/dts/Bindings/arm/qcom-soc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC compatibles naming convention
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    qcom,SoC-IP
+
+  For example::
+   qcom,sdm845-llcc-bwmon
+
+  When adding new compatibles to existing bindings, use the format in the
+  existing binding, even if it contradicts the above.
+
+select:
+  properties:
+    compatible:
+      pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # Preferred naming style for compatibles of SoC components:
+      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$"
+      - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
+
+      # Legacy namings - variations of existing patterns/compatibles are OK,
+      # but do not add completely new entries to these:
+      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - enum:
+          - qcom,dsi-ctrl-6g-qcm2290
+          - qcom,gpucc-sdm630
+          - qcom,gpucc-sdm660
+          - qcom,lcc-apq8064
+          - qcom,lcc-ipq8064
+          - qcom,lcc-mdm9615
+          - qcom,lcc-msm8960
+          - qcom,lpass-cpu-apq8016
+          - qcom,usb-ss-ipq4019-phy
+          - qcom,usb-hs-ipq4019-phy
+          - qcom,vqmmc-ipq4019-regulator
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - qcom,ipq806x-gmac
+          - qcom,ipq806x-nand
+          - qcom,ipq806x-sata-phy
+          - qcom,ipq806x-usb-phy-ss
+          - qcom,ipq806x-usb-phy-hs
+
+additionalProperties: true
diff --git a/dts/Bindings/arm/qcom.yaml b/dts/Bindings/arm/qcom.yaml
index 1b5ac6b02b..27063a045b 100644
--- a/dts/Bindings/arm/qcom.yaml
+++ b/dts/Bindings/arm/qcom.yaml
@@ -29,17 +29,22 @@ description: |
         apq8074
         apq8084
         apq8096
+        ipq4018
         ipq6018
         ipq8074
         mdm9615
         msm8226
         msm8916
+        msm8956
         msm8974
+        msm8976
         msm8992
         msm8994
         msm8996
         msm8998
         qcs404
+        qdu1000
+        qru1000
         sa8155p
         sa8540p
         sc7180
@@ -51,11 +56,15 @@ description: |
         sdm632
         sdm636
         sdm660
+        sdm670
         sdm845
         sdx55
         sdx65
+        sm4250
+        sm6115
         sm6125
         sm6350
+        sm6375
         sm7225
         sm8150
         sm8250
@@ -76,6 +85,7 @@ description: |
         mtp
         qrd
         sbc
+        x100
 
   The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
   where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@@ -114,7 +124,9 @@ properties:
       - items:
           - enum:
               - asus,sparrow
+              - huawei,sturgeon
               - lg,lenok
+              - samsung,matisse-wifi
           - const: qcom,apq8026
 
       - items:
@@ -150,20 +162,32 @@ properties:
 
       - items:
           - enum:
+              - sony,kugo-row
+              - sony,suzu-row
+          - const: qcom,msm8956
+
+      - items:
+          - enum:
               - qcom,msm8960-cdp
           - const: qcom,msm8960
 
       - items:
           - enum:
-              - fairphone,fp2
               - lge,hammerhead
-              - samsung,klte
               - sony,xperia-amami
-              - sony,xperia-castor
               - sony,xperia-honami
           - const: qcom,msm8974
 
       - items:
+          - enum:
+              - fairphone,fp2
+              - oneplus,bacon
+              - samsung,klte
+              - sony,xperia-castor
+          - const: qcom,msm8974pro
+          - const: qcom,msm8974
+
+      - items:
           - const: qcom,msm8916-mtp
           - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
@@ -221,13 +245,20 @@ properties:
 
       - items:
           - enum:
+              - oneplus,oneplus3
+              - oneplus,oneplus3t
               - qcom,msm8996-mtp
               - sony,dora-row
               - sony,kagura-row
               - sony,keyaki-row
               - xiaomi,gemini
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
               - xiaomi,natrium
               - xiaomi,scorpio
+          - const: qcom,msm8996pro
           - const: qcom,msm8996
 
       - items:
@@ -242,10 +273,17 @@ properties:
               - sony,xperia-lilac
               - sony,xperia-maple
               - sony,xperia-poplar
+              - xiaomi,sagit
           - const: qcom,msm8998
 
       - items:
           - enum:
+              - 8dev,jalapeno
+              - alfa-network,ap120c-ac
+          - const: qcom,ipq4018
+
+      - items:
+          - enum:
               - qcom,ipq4019-ap-dk01.1-c1
               - qcom,ipq4019-ap-dk04.1-c3
               - qcom,ipq4019-ap-dk07.1-c1
@@ -255,6 +293,7 @@ properties:
 
       - items:
           - enum:
+              - mikrotik,rb3011
               - qcom,ipq8064-ap148
           - const: qcom,ipq8064
 
@@ -265,6 +304,25 @@ properties:
               - qcom,ipq8074-hk10-c2
           - const: qcom,ipq8074
 
+      - description: Sierra Wireless MangOH Green with WP8548 Module
+        items:
+          - const: swir,mangoh-green-wp8548
+          - const: swir,wp8548
+          - const: qcom,mdm9615
+
+      - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qdu1000-idp
+              - qcom,qdu1000-x100
+          - const: qcom,qdu1000
+
+      - description: Qualcomm Technologies, Inc. Radio Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qru1000-idp
+          - const: qcom,qru1000
+
       - description: Qualcomm Technologies, Inc. SC7180 IDP
         items:
           - enum:
@@ -463,6 +521,17 @@ properties:
           - const: google,pazquel-sku2
           - const: qcom,sc7180
 
+      - description: Google Pazquel360 with LTE (newest rev)
+        items:
+          - const: google,pazquel-sku22
+          - const: google,pazquel-sku20
+          - const: qcom,sc7180
+
+      - description: Google Pazquel360 with WiFi (newest rev)
+        items:
+          - const: google,pazquel-sku21
+          - const: qcom,sc7180
+
       - description: Sharp Dynabook Chromebook C1 (rev1)
         items:
           - const: google,pompom-rev1
@@ -575,6 +644,11 @@ properties:
           - const: google,evoker
           - const: qcom,sc7280
 
+      - description: Google Evoker with LTE (newest rev)
+        items:
+          - const: google,evoker-sku512
+          - const: qcom,sc7280
+
       - description: Google Herobrine (newest rev)
         items:
           - const: google,herobrine
@@ -595,6 +669,16 @@ properties:
           - const: google,villager-sku512
           - const: qcom,sc7280
 
+      - description: Google Zombie (newest rev)
+        items:
+          - const: google,zombie
+          - const: qcom,sc7280
+
+      - description: Google Zombie with LTE (newest rev)
+        items:
+          - const: google,zombie-sku512
+          - const: qcom,sc7280
+
       - items:
           - enum:
               - lenovo,flex-5g
@@ -639,6 +723,11 @@ properties:
 
       - items:
           - enum:
+              - google,sargo
+          - const: qcom,sdm670
+
+      - items:
+          - enum:
               - qcom,sdx55-mtp
               - qcom,sdx55-telit-fn980-tlb
               - qcom,sdx55-t55
@@ -670,10 +759,14 @@ properties:
       - items:
           - enum:
               - qcom,sa8295p-adp
+              - qcom,sa8540p-ride
           - const: qcom,sa8540p
 
       - items:
           - enum:
+              - google,cheza
+              - google,cheza-rev1
+              - google,cheza-rev2
               - lenovo,yoga-c630
               - lg,judyln
               - lg,judyp
@@ -681,17 +774,24 @@ properties:
               - oneplus,fajita
               - qcom,sdm845-mtp
               - shift,axolotl
+              - samsung,starqltechn
               - samsung,w737
               - sony,akari-row
               - sony,akatsuki-row
               - sony,apollo-row
               - thundercomm,db845c
               - xiaomi,beryllium
+              - xiaomi,beryllium-ebbg
               - xiaomi,polaris
           - const: qcom,sdm845
 
       - items:
           - enum:
+              - oneplus,billie2
+          - const: qcom,sm4250
+
+      - items:
+          - enum:
               - sony,pdx201
           - const: qcom,sm6125
 
@@ -702,6 +802,11 @@ properties:
 
       - items:
           - enum:
+              - sony,pdx225
+          - const: qcom,sm6375
+
+      - items:
+          - enum:
               - fairphone,fp4
           - const: qcom,sm7225
 
@@ -737,8 +842,129 @@ properties:
               - qcom,sm8450-hdk
               - qcom,sm8450-qrd
               - sony,pdx223
+              - sony,pdx224
           - const: qcom,sm8450
 
+  # Board compatibles go above
+
+  qcom,msm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    items:
+      items:
+        - description: |
+            MSM chipset ID - an exact match value consisting of two bitfields::
+             - bits 0-15  - The unique MSM chipset ID
+             - bits 16-31 - Reserved; should be 0
+        - description: |
+            Hardware revision ID - a chipset specific 32-bit ID representing
+            the version of the chipset.  It is best a match value - the
+            bootloader will look for the closest possible match.
+    deprecated: true
+    description:
+      The MSM chipset and hardware revision used Qualcomm bootloaders.  It
+      can optionally be an array of these to indicate multiple hardware that
+      use the same device tree.  It is expected that the bootloader will use
+      this information at boot-up to decide which device tree to use when given
+      multiple device trees, some of which may not be compatible with the
+      actual hardware.  It is the bootloader's responsibility to pass the
+      correct device tree to the kernel.
+      The property is deprecated.
+
+  qcom,board-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    oneOf:
+      - items:
+          - items:
+              - description: |
+                  Board ID consisting of three bitfields::
+                    - bits 31-24 - Unused
+                    - bits 23-16 - Platform Version Major
+                    - bits 15-8  - Platform Version Minor
+                    - bits 7-0   - Platform Type
+                  Platform Type field is an exact match value.  The
+                  Platform Major/Minor field is a best match.  The bootloader will
+                  look for the closest possible match.
+              - description: |
+                  Subtype ID unique to a Platform Type/Chipset ID.  For a given
+                  Platform Type, there will typically only be a single board and the
+                  subtype_id will be 0.  However in some cases board variants may
+                  need to be distinguished by different subtype_id values.
+      - items:
+          # OnePlus uses a variant of board-id with four elements:
+          - items:
+              - const: 8
+              - const: 0
+              - description: OnePlus board ID
+              - description: OnePlus subtype ID
+    deprecated: true
+    description:
+      The board type and revision information.  It can optionally be an array
+      of these to indicate multiple boards that use the same device tree.  It
+      is expected that the bootloader will use this information at boot-up to
+      decide which device tree to use when given multiple device trees, some of
+      which may not be compatible with the actual hardware.  It is the
+      bootloader's responsibility to pass the correct device tree to the
+      kernel
+      The property is deprecated.
+
+allOf:
+  # Explicit allow-list for older SoCs. The legacy properties are not allowed
+  # on newer SoCs.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8026
+              - qcom,apq8094
+              - qcom,apq8096
+              - qcom,msm8992
+              - qcom,msm8994
+              - qcom,msm8996
+              - qcom,msm8998
+              - qcom,sdm630
+              - qcom,sdm632
+              - qcom,sdm845
+              - qcom,sdx55
+              - qcom,sdx65
+              - qcom,sm6125
+              - qcom,sm6350
+              - qcom,sm7225
+              - qcom,sm8150
+              - qcom,sm8250
+    then:
+      properties:
+        qcom,board-id: true
+        qcom,msm-id: true
+    else:
+      properties:
+        qcom,board-id: false
+        qcom,msm-id: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - oneplus,enchilada
+              - oneplus,fajita
+    then:
+      properties:
+        qcom,board-id:
+          items:
+            minItems: 4
+    else:
+      properties:
+        qcom,board-id:
+          items:
+            maxItems: 2
+
 additionalProperties: true
 
 ...
diff --git a/dts/Bindings/arm/rockchip.yaml b/dts/Bindings/arm/rockchip.yaml
index c6c69a4e37..88ff4422a8 100644
--- a/dts/Bindings/arm/rockchip.yaml
+++ b/dts/Bindings/arm/rockchip.yaml
@@ -30,11 +30,26 @@ properties:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
+      - description: Anbernic RG351M
+        items:
+          - const: anbernic,rg351m
+          - const: rockchip,rk3326
+
       - description: Anbernic RG353P
         items:
           - const: anbernic,rg353p
           - const: rockchip,rk3566
 
+      - description: Anbernic RG353V
+        items:
+          - const: anbernic,rg353v
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG353VS
+        items:
+          - const: anbernic,rg353vs
+          - const: rockchip,rk3566
+
       - description: Anbernic RG503
         items:
           - const: anbernic,rg503
@@ -468,6 +483,21 @@ properties:
           - const: hardkernel,rk3326-odroid-go2
           - const: rockchip,rk3326
 
+      - description: Hardkernel Odroid Go Advance Black Edition
+        items:
+          - const: hardkernel,rk3326-odroid-go2-v11
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid Go Super
+        items:
+          - const: hardkernel,rk3326-odroid-go3
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid M1
+        items:
+          - const: rockchip,rk3568-odroid-m1
+          - const: rockchip,rk3568
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
@@ -563,7 +593,9 @@ properties:
       - description: Pine64 SoQuartz SoM
         items:
           - enum:
+              - pine64,soquartz-blade
               - pine64,soquartz-cm4io
+              - pine64,soquartz-model-a
           - const: pine64,soquartz
           - const: rockchip,rk3566
 
@@ -709,6 +741,11 @@ properties:
           - const: rockchip,rv1108-evb
           - const: rockchip,rv1108
 
+      - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
+        items:
+          - const: tsd,px30-ringneck-haikou
+          - const: rockchip,px30
+
       - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
         items:
           - const: tsd,rk3368-lion-haikou
@@ -729,6 +766,11 @@ properties:
           - const: zkmagic,a95x-z2
           - const: rockchip,rk3318
 
+      - description: Rockchip RK3566 BOX Evaluation Demo board
+        items:
+          - const: rockchip,rk3566-box-demo
+          - const: rockchip,rk3566
+
       - description: Rockchip RK3568 Evaluation board
         items:
           - const: rockchip,rk3568-evb1-v10
diff --git a/dts/Bindings/arm/socionext/milbeaut.yaml b/dts/Bindings/arm/socionext/milbeaut.yaml
index aa1d4afbc5..5a428a8857 100644
--- a/dts/Bindings/arm/socionext/milbeaut.yaml
+++ b/dts/Bindings/arm/socionext/milbeaut.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/socionext/milbeaut.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Milbeaut platforms device tree bindings
+title: Milbeaut platforms
 
 maintainers:
   - Taichi Sugaya <sugaya.taichi@socionext.com>
diff --git a/dts/Bindings/arm/socionext/uniphier.yaml b/dts/Bindings/arm/socionext/uniphier.yaml
index 8c0e916584..3e7f3d927e 100644
--- a/dts/Bindings/arm/socionext/uniphier.yaml
+++ b/dts/Bindings/arm/socionext/uniphier.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Socionext UniPhier platform device tree bindings
+title: Socionext UniPhier platform
 
 maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
@@ -26,6 +26,12 @@ properties:
               - socionext,uniphier-pro4-ref
               - socionext,uniphier-pro4-sanji
           - const: socionext,uniphier-pro4
+      - description: Pro5 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pro5-epcore
+              - socionext,uniphier-pro5-proex
+          - const: socionext,uniphier-pro5
       - description: sLD8 SoC boards
         items:
           - enum:
diff --git a/dts/Bindings/arm/sp810.yaml b/dts/Bindings/arm/sp810.yaml
index bc8e524aa9..c9094e5ec5 100644
--- a/dts/Bindings/arm/sp810.yaml
+++ b/dts/Bindings/arm/sp810.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sp810.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Express SP810 System Controller bindings
+title: ARM Versatile Express SP810 System Controller
 
 maintainers:
   - Andre Przywara <andre.przywara@arm.com>
diff --git a/dts/Bindings/arm/sprd/sprd.yaml b/dts/Bindings/arm/sprd/sprd.yaml
index 2c12e57139..eaa67b8e0d 100644
--- a/dts/Bindings/arm/sprd/sprd.yaml
+++ b/dts/Bindings/arm/sprd/sprd.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Unisoc platforms device tree bindings
+title: Unisoc platforms
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/dts/Bindings/arm/stm32/st,mlahb.yaml b/dts/Bindings/arm/stm32/st,mlahb.yaml
index ecb28e90fd..2297ad3f47 100644
--- a/dts/Bindings/arm/stm32/st,mlahb.yaml
+++ b/dts/Bindings/arm/stm32/st,mlahb.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 ML-AHB interconnect bindings
+title: STMicroelectronics STM32 ML-AHB interconnect
 
 maintainers:
   - Fabien Dessenne <fabien.dessenne@foss.st.com>
diff --git a/dts/Bindings/arm/stm32/st,stm32-syscon.yaml b/dts/Bindings/arm/stm32/st,stm32-syscon.yaml
index 6f846d69c5..b2b156cc16 100644
--- a/dts/Bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/dts/Bindings/arm/stm32/st,stm32-syscon.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 Platforms System Controller bindings
+title: STMicroelectronics STM32 Platforms System Controller
 
 maintainers:
   - Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/dts/Bindings/arm/stm32/stm32.yaml b/dts/Bindings/arm/stm32/stm32.yaml
index 4c605bccc4..13e3424114 100644
--- a/dts/Bindings/arm/stm32/stm32.yaml
+++ b/dts/Bindings/arm/stm32/stm32.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/stm32/stm32.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Platforms Device Tree Bindings
+title: STMicroelectronics STM32 Platforms
 
 maintainers:
   - Alexandre Torgue <alexandre.torgue@foss.st.com>
@@ -59,6 +59,12 @@ properties:
               - prt,prtt1s   # Protonic PRTT1S
           - const: st,stm32mp151
 
+      - description: DH STM32MP151 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp151a-dhcor-testbench
+          - const: dh,stm32mp151a-dhcor-som
+          - const: st,stm32mp151
+
       - description: DH STM32MP153 DHCOM SoM based Boards
         items:
           - const: dh,stm32mp153c-dhcom-drc02
diff --git a/dts/Bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/dts/Bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
index f3878e0b3c..d805c4508b 100644
--- a/dts/Bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
+++ b/dts/Bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner CPU Configuration Controller Device Tree Bindings
+title: Allwinner CPU Configuration Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/dts/Bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/dts/Bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
index 668aadbfe4..644f391afb 100644
--- a/dts/Bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
+++ b/dts/Bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 PRCM Device Tree Bindings
+title: Allwinner A80 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/dts/Bindings/arm/swir.txt b/dts/Bindings/arm/swir.txt
deleted file mode 100644
index 042be73a95..0000000000
--- a/dts/Bindings/arm/swir.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Sierra Wireless Modules device tree bindings
---------------------------------------------
-
-Supported Modules :
- - WP8548 : Includes MDM9615 and PM8018 in a module
-
-Sierra Wireless modules shall have the following properties :
-  Required root node property
-   - compatible: "swir,wp8548" for the WP8548 CF3 Module
-
-Board compatible values:
-  - "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
index 711bb4d08c..6089a96eae 100644
--- a/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
+++ b/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: NVIDIA Tegra CPU COMPLEX CLUSTER area device tree bindings
+title: NVIDIA Tegra CPU COMPLEX CLUSTER area
 
 maintainers:
   - Sumit Gupta <sumitg@nvidia.com>
@@ -47,5 +47,4 @@ examples:
       compatible = "nvidia,tegra234-ccplex-cluster";
       reg = <0x0e000000 0x5ffff>;
       nvidia,bpmp = <&bpmp>;
-      status = "okay";
     };
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml
index debb2b0c80..dd3a4770c6 100644
--- a/dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml
+++ b/dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: NVIDIA Tegra194 CBB 1.0 bindings
+title: NVIDIA Tegra194 CBB 1.0
 
 maintainers:
   - Sumit Gupta <sumitg@nvidia.com>
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml
index 7fd8d47b1b..4a00593b9f 100644
--- a/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ b/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -123,6 +123,33 @@ properties:
       some PLLs, clocks and then brings up CPU0 for resuming the
       system.
 
+  core-supply:
+    description:
+      Phandle to voltage regulator connected to the SoC Core power rail.
+
+  core-domain:
+    type: object
+    description: |
+      The vast majority of hardware blocks of Tegra SoC belong to a
+      Core power domain, which has a dedicated voltage rail that powers
+      the blocks.
+
+    properties:
+      operating-points-v2:
+        description:
+          Should contain level, voltages and opp-supported-hw property.
+          The supported-hw is a bitfield indicating SoC speedo or process
+          ID mask.
+
+      "#power-domain-cells":
+        const: 0
+
+    required:
+      - operating-points-v2
+      - "#power-domain-cells"
+
+    additionalProperties: false
+
   i2c-thermtrip:
     type: object
     description:
@@ -300,33 +327,6 @@ patternProperties:
 
     additionalProperties: false
 
-  core-domain:
-    type: object
-    description: |
-      The vast majority of hardware blocks of Tegra SoC belong to a
-      Core power domain, which has a dedicated voltage rail that powers
-      the blocks.
-
-    properties:
-      operating-points-v2:
-        description:
-          Should contain level, voltages and opp-supported-hw property.
-          The supported-hw is a bitfield indicating SoC speedo or process
-          ID mask.
-
-      "#power-domain-cells":
-        const: 0
-
-    required:
-      - operating-points-v2
-      - "#power-domain-cells"
-
-    additionalProperties: false
-
-  core-supply:
-    description:
-      Phandle to voltage regulator connected to the SoC Core power rail.
-
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml
index 7b1fe50ffb..44184ee014 100644
--- a/dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml
+++ b/dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: NVIDIA Tegra CBB 2.0 bindings
+title: NVIDIA Tegra CBB 2.0
 
 maintainers:
   - Sumit Gupta <sumitg@nvidia.com>
diff --git a/dts/Bindings/arm/ti/k3.yaml b/dts/Bindings/arm/ti/k3.yaml
index 28b8232e1c..203faab801 100644
--- a/dts/Bindings/arm/ti/k3.yaml
+++ b/dts/Bindings/arm/ti/k3.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ti/k3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 Multicore SoC architecture device tree bindings
+title: Texas Instruments K3 Multicore SoC architecture
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
@@ -61,6 +61,7 @@ properties:
           - const: ti,j721e
           - items:
               - enum:
+                  - beagle,j721e-beagleboneai64
                   - ti,j721e-evm
                   - ti,j721e-sk
               - const: ti,j721e
diff --git a/dts/Bindings/arm/ti/ti,davinci.yaml b/dts/Bindings/arm/ti/ti,davinci.yaml
index c022d325fc..1656d1a447 100644
--- a/dts/Bindings/arm/ti/ti,davinci.yaml
+++ b/dts/Bindings/arm/ti/ti,davinci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ti/ti,davinci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DaVinci Platforms Device Tree Bindings
+title: Texas Instruments DaVinci Platforms
 
 maintainers:
   - Sekhar Nori <nsekhar@ti.com>
diff --git a/dts/Bindings/arm/vexpress-config.yaml b/dts/Bindings/arm/vexpress-config.yaml
index 09e1adf5ca..b74380da31 100644
--- a/dts/Bindings/arm/vexpress-config.yaml
+++ b/dts/Bindings/arm/vexpress-config.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/vexpress-config.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Express configuration bus bindings
+title: ARM Versatile Express configuration bus
 
 maintainers:
   - Andre Przywara <andre.przywara@arm.com>
diff --git a/dts/Bindings/arm/vexpress-sysreg.yaml b/dts/Bindings/arm/vexpress-sysreg.yaml
index f04db802a7..be6e3b5425 100644
--- a/dts/Bindings/arm/vexpress-sysreg.yaml
+++ b/dts/Bindings/arm/vexpress-sysreg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Express system registers bindings
+title: ARM Versatile Express system registers
 
 maintainers:
   - Andre Przywara <andre.przywara@arm.com>
diff --git a/dts/Bindings/ata/allwinner,sun4i-a10-ahci.yaml b/dts/Bindings/ata/allwinner,sun4i-a10-ahci.yaml
index cb530b46be..2011bd03cd 100644
--- a/dts/Bindings/ata/allwinner,sun4i-a10-ahci.yaml
+++ b/dts/Bindings/ata/allwinner,sun4i-a10-ahci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ata/allwinner,sun4i-a10-ahci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AHCI SATA Controller bindings
+title: Allwinner A10 AHCI SATA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/dts/Bindings/ata/allwinner,sun8i-r40-ahci.yaml b/dts/Bindings/ata/allwinner,sun8i-r40-ahci.yaml
index e6b42a113f..a2afe2ad60 100644
--- a/dts/Bindings/ata/allwinner,sun8i-r40-ahci.yaml
+++ b/dts/Bindings/ata/allwinner,sun8i-r40-ahci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ata/allwinner,sun8i-r40-ahci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 AHCI SATA Controller bindings
+title: Allwinner R40 AHCI SATA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/dts/Bindings/ata/ata-generic.yaml b/dts/Bindings/ata/ata-generic.yaml
new file mode 100644
index 0000000000..0697927f3d
--- /dev/null
+++ b/dts/Bindings/ata/ata-generic.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ata-generic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Parallel ATA Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Generic Parallel ATA controllers supporting PIO modes only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,vexpress-cf
+          - fsl,mpc8349emitx-pata
+      - const: ata-generic
+
+  reg:
+    items:
+      - description: Command interface registers
+      - description: Control interface registers
+
+  reg-shift:
+    enum: [ 1, 2 ]
+
+  interrupts:
+    maxItems: 1
+
+  ata-generic,use16bit:
+    type: boolean
+    description: Use 16-bit accesses instead of 32-bit for data transfers
+
+  pio-mode:
+    description: Maximum ATA PIO transfer mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 6
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    compact-flash@1a000 {
+        compatible = "arm,vexpress-cf", "ata-generic";
+        reg = <0x1a000 0x100>,
+              <0x1a100 0xf00>;
+        reg-shift = <2>;
+    };
+...
diff --git a/dts/Bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/dts/Bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
new file mode 100644
index 0000000000..b568d0ce43
--- /dev/null
+++ b/dts/Bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
+  sitting together with the PHYs.  It is not the same as the MSI bus coming
+  from i.MX8 System Controller Unit (SCU) which is used to control power,
+  clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
+
+  i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
+  that is, MSI clock and AHB clock, need to be enabled so that peripherals
+  connected to the bus can be accessed. Also, the bus is part of a power
+  domain. The power domain needs to be enabled before the peripherals can
+  be accessed.
+
+  Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
+  like I2C controller, PWM controller, MIPI DSI controller and Control and
+  Status Registers (CSR) module, are accessed through the bus.
+
+  The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
+  pixel link MSI bus controller and does not allow SCFW user to control it.
+  So, the controller's registers cannot be accessed by SCFW user. Hence,
+  the interrupts generated by the controller don't make any sense from SCFW
+  user's point of view.
+
+allOf:
+  - $ref: simple-pm-bus.yaml#
+
+# We need a select here so we don't match all nodes with 'simple-pm-bus'.
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+      - const: simple-pm-bus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master gated clock from system
+      - description: AHB clock
+
+  clock-names:
+    items:
+      - const: msi
+      - const: ahb
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Devices attached to the bus
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    bus@56200000 {
+        compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
+        reg = <0x56200000 0x20000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&dc0_irqsteer>;
+        interrupts = <320>;
+        ranges;
+        clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
+                 <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "msi", "ahb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        syscon@56221000 {
+            compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+            reg = <0x56221000 0x1000>;
+            clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+            clock-names = "ipg";
+
+            pxl2dpi {
+                compatible = "fsl,imx8qxp-pxl2dpi";
+                fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+                power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0>;
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+
+                    port@1 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <1>;
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+                };
+            };
+
+            ldb {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "fsl,imx8qxp-ldb";
+                clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                         <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+                clock-names = "pixel", "bypass";
+                power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+                channel@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+
+                channel@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+            };
+        };
+
+        clock-controller@56223004 {
+            compatible = "fsl,imx8qxp-lpcg";
+            reg = <0x56223004 0x4>;
+            #clock-cells = <1>;
+            clocks = <&mipi_lvds_0_ipg_clk>;
+            clock-indices = <IMX_LPCG_CLK_4>;
+            clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+
+        phy@56228300 {
+            compatible = "fsl,imx8qxp-mipi-dphy";
+            reg = <0x56228300 0x100>;
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+            clock-names = "phy_ref";
+            #phy-cells = <0>;
+            fsl,syscon = <&mipi_lvds_0_csr>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+    };
diff --git a/dts/Bindings/bus/ti-sysc.yaml b/dts/Bindings/bus/ti-sysc.yaml
index fced4082b0..f089634f94 100644
--- a/dts/Bindings/bus/ti-sysc.yaml
+++ b/dts/Bindings/bus/ti-sysc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments interconnect target module binding
+title: Texas Instruments interconnect target module
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
diff --git a/dts/Bindings/chrome/google,cros-ec-typec.yaml b/dts/Bindings/chrome/google,cros-ec-typec.yaml
index 50ebd8c577..defcf1e12a 100644
--- a/dts/Bindings/chrome/google,cros-ec-typec.yaml
+++ b/dts/Bindings/chrome/google,cros-ec-typec.yaml
@@ -48,6 +48,7 @@ examples:
       cros_ec: ec@0 {
         compatible = "google,cros-ec-spi";
         reg = <0>;
+        interrupts = <35 0>;
 
         typec {
           compatible = "google,cros-ec-typec";
diff --git a/dts/Bindings/chrome/google,cros-kbd-led-backlight.yaml b/dts/Bindings/chrome/google,cros-kbd-led-backlight.yaml
index 5b875af6a9..40244d003c 100644
--- a/dts/Bindings/chrome/google,cros-kbd-led-backlight.yaml
+++ b/dts/Bindings/chrome/google,cros-kbd-led-backlight.yaml
@@ -27,6 +27,7 @@ examples:
       cros_ec: ec@0 {
         compatible = "google,cros-ec-spi";
         reg = <0>;
+        interrupts = <15 0>;
 
         kbd-led-backlight {
           compatible = "google,cros-kbd-led-backlight";
diff --git a/dts/Bindings/clock/adi,axi-clkgen.yaml b/dts/Bindings/clock/adi,axi-clkgen.yaml
index 983033fe5b..5e942bccf2 100644
--- a/dts/Bindings/clock/adi,axi-clkgen.yaml
+++ b/dts/Bindings/clock/adi,axi-clkgen.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Analog Devices AXI clkgen pcore clock generator
+title: Analog Devices AXI clkgen pcore clock generator
 
 maintainers:
   - Lars-Peter Clausen <lars@metafoo.de>
diff --git a/dts/Bindings/clock/calxeda.yaml b/dts/Bindings/clock/calxeda.yaml
index a34cbf3c9a..a88fbe20fe 100644
--- a/dts/Bindings/clock/calxeda.yaml
+++ b/dts/Bindings/clock/calxeda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/calxeda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device Tree Clock bindings for Calxeda highbank platform
+title: Calxeda highbank platform Clock Controller
 
 description: |
   This binding covers the Calxeda SoC internal peripheral and bus clocks
diff --git a/dts/Bindings/clock/cirrus,cs2000-cp.yaml b/dts/Bindings/clock/cirrus,cs2000-cp.yaml
index 82836086ca..d416c374e8 100644
--- a/dts/Bindings/clock/cirrus,cs2000-cp.yaml
+++ b/dts/Bindings/clock/cirrus,cs2000-cp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+title: CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/dts/Bindings/clock/fixed-clock.yaml b/dts/Bindings/clock/fixed-clock.yaml
index b657ecd0ef..b0a4fb8256 100644
--- a/dts/Bindings/clock/fixed-clock.yaml
+++ b/dts/Bindings/clock/fixed-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple fixed-rate clock sources
+title: Simple fixed-rate clock sources
 
 maintainers:
   - Michael Turquette <mturquette@baylibre.com>
diff --git a/dts/Bindings/clock/fixed-factor-clock.yaml b/dts/Bindings/clock/fixed-factor-clock.yaml
index 0b02378a3a..8f71ab3004 100644
--- a/dts/Bindings/clock/fixed-factor-clock.yaml
+++ b/dts/Bindings/clock/fixed-factor-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple fixed factor rate clock sources
+title: Simple fixed factor rate clock sources
 
 maintainers:
   - Michael Turquette <mturquette@baylibre.com>
diff --git a/dts/Bindings/clock/fixed-mmio-clock.yaml b/dts/Bindings/clock/fixed-mmio-clock.yaml
index 1453ac849a..e22fc272d0 100644
--- a/dts/Bindings/clock/fixed-mmio-clock.yaml
+++ b/dts/Bindings/clock/fixed-mmio-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fixed-mmio-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple memory mapped IO fixed-rate clock sources
+title: Simple memory mapped IO fixed-rate clock sources
 
 description:
   This binding describes a fixed-rate clock for which the frequency can
diff --git a/dts/Bindings/clock/fsl,imx8m-anatop.yaml b/dts/Bindings/clock/fsl,imx8m-anatop.yaml
new file mode 100644
index 0000000000..bbd22e95b3
--- /dev/null
+++ b/dts/Bindings/clock/fsl,imx8m-anatop.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8m-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Anatop Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX8M Family anatop PLL module which generates PLL to CCM root.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mm-anatop
+          - fsl,imx8mq-anatop
+      - items:
+          - enum:
+              - fsl,imx8mn-anatop
+              - fsl,imx8mp-anatop
+          - const: fsl,imx8mm-anatop
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    anatop: clock-controller@30360000 {
+        compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
+        reg = <0x30360000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/fsl,plldig.yaml b/dts/Bindings/clock/fsl,plldig.yaml
index 9ac716dfa6..88dd9c18db 100644
--- a/dts/Bindings/clock/fsl,plldig.yaml
+++ b/dts/Bindings/clock/fsl,plldig.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock Binding
+title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock
 
 maintainers:
   - Wen He <wen.he_1@nxp.com>
diff --git a/dts/Bindings/clock/fsl,sai-clock.yaml b/dts/Bindings/clock/fsl,sai-clock.yaml
index fc3bdfdc09..3bca9d11c1 100644
--- a/dts/Bindings/clock/fsl,sai-clock.yaml
+++ b/dts/Bindings/clock/fsl,sai-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale SAI bitclock-as-a-clock binding
+title: Freescale SAI bitclock-as-a-clock
 
 maintainers:
   - Michael Walle <michael@walle.cc>
diff --git a/dts/Bindings/clock/fsl,scu-clk.yaml b/dts/Bindings/clock/fsl,scu-clk.yaml
index f2c48460a3..36d4cfc3c2 100644
--- a/dts/Bindings/clock/fsl,scu-clk.yaml
+++ b/dts/Bindings/clock/fsl,scu-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - Clock Controller Based on SCU Message Protocol
 
 maintainers:
   - Abel Vesa <abel.vesa@nxp.com>
diff --git a/dts/Bindings/clock/idt,versaclock5.yaml b/dts/Bindings/clock/idt,versaclock5.yaml
index f9ba9864d8..61b246cf5e 100644
--- a/dts/Bindings/clock/idt,versaclock5.yaml
+++ b/dts/Bindings/clock/idt,versaclock5.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators
+title: IDT VersaClock 5 and 6 programmable I2C clock generators
 
 description: |
   The IDT VersaClock 5 and VersaClock 6 are programmable I2C
diff --git a/dts/Bindings/clock/imx1-clock.yaml b/dts/Bindings/clock/imx1-clock.yaml
index 56f524780b..7ade4c32af 100644
--- a/dts/Bindings/clock/imx1-clock.yaml
+++ b/dts/Bindings/clock/imx1-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX1 CPUs
+title: Freescale i.MX1 CPUs Clock Controller
 
 maintainers:
   - Alexander Shiyan <shc_work@mail.ru>
diff --git a/dts/Bindings/clock/imx21-clock.yaml b/dts/Bindings/clock/imx21-clock.yaml
index e2d5054470..79cc843703 100644
--- a/dts/Bindings/clock/imx21-clock.yaml
+++ b/dts/Bindings/clock/imx21-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX21
+title: Freescale i.MX21 Clock Controller
 
 maintainers:
   - Alexander Shiyan <shc_work@mail.ru>
diff --git a/dts/Bindings/clock/imx23-clock.yaml b/dts/Bindings/clock/imx23-clock.yaml
index 7e890ab9c7..5e71c92195 100644
--- a/dts/Bindings/clock/imx23-clock.yaml
+++ b/dts/Bindings/clock/imx23-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX23
+title: Freescale i.MX23 Clock Controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
diff --git a/dts/Bindings/clock/imx25-clock.yaml b/dts/Bindings/clock/imx25-clock.yaml
index 1792e13898..c626a15859 100644
--- a/dts/Bindings/clock/imx25-clock.yaml
+++ b/dts/Bindings/clock/imx25-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX25
+title: Freescale i.MX25 Clock Controller
 
 maintainers:
   - Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/dts/Bindings/clock/imx27-clock.yaml b/dts/Bindings/clock/imx27-clock.yaml
index 99925aa22a..71d78a0b55 100644
--- a/dts/Bindings/clock/imx27-clock.yaml
+++ b/dts/Bindings/clock/imx27-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX27
+title: Freescale i.MX27 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
diff --git a/dts/Bindings/clock/imx28-clock.yaml b/dts/Bindings/clock/imx28-clock.yaml
index a542d680b1..4aaad7b9c6 100644
--- a/dts/Bindings/clock/imx28-clock.yaml
+++ b/dts/Bindings/clock/imx28-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX28
+title: Freescale i.MX28 Clock Controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
diff --git a/dts/Bindings/clock/imx31-clock.yaml b/dts/Bindings/clock/imx31-clock.yaml
index 168c8ada5e..50a8498eef 100644
--- a/dts/Bindings/clock/imx31-clock.yaml
+++ b/dts/Bindings/clock/imx31-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX31
+title: Freescale i.MX31 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
diff --git a/dts/Bindings/clock/imx35-clock.yaml b/dts/Bindings/clock/imx35-clock.yaml
index 6415bb6a8d..c063369de3 100644
--- a/dts/Bindings/clock/imx35-clock.yaml
+++ b/dts/Bindings/clock/imx35-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX35
+title: Freescale i.MX35 Clock Controller
 
 maintainers:
   - Steffen Trumtrar <s.trumtrar@pengutronix.de>
diff --git a/dts/Bindings/clock/imx5-clock.yaml b/dts/Bindings/clock/imx5-clock.yaml
index c0e19ff92c..423c0142c1 100644
--- a/dts/Bindings/clock/imx5-clock.yaml
+++ b/dts/Bindings/clock/imx5-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX5
+title: Freescale i.MX5 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
diff --git a/dts/Bindings/clock/imx6q-clock.yaml b/dts/Bindings/clock/imx6q-clock.yaml
index 4f4637eddb..bae4fcb3aa 100644
--- a/dts/Bindings/clock/imx6q-clock.yaml
+++ b/dts/Bindings/clock/imx6q-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 Quad
+title: Freescale i.MX6 Quad Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/dts/Bindings/clock/imx6sl-clock.yaml b/dts/Bindings/clock/imx6sl-clock.yaml
index b83c8f43d6..c85ff6ea3d 100644
--- a/dts/Bindings/clock/imx6sl-clock.yaml
+++ b/dts/Bindings/clock/imx6sl-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SoloLite
+title: Freescale i.MX6 SoloLite Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/dts/Bindings/clock/imx6sll-clock.yaml b/dts/Bindings/clock/imx6sll-clock.yaml
index 484894a4b2..6b549ed149 100644
--- a/dts/Bindings/clock/imx6sll-clock.yaml
+++ b/dts/Bindings/clock/imx6sll-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SLL
+title: Freescale i.MX6 SLL Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/dts/Bindings/clock/imx6sx-clock.yaml b/dts/Bindings/clock/imx6sx-clock.yaml
index e6c795657c..55dcad18b7 100644
--- a/dts/Bindings/clock/imx6sx-clock.yaml
+++ b/dts/Bindings/clock/imx6sx-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SoloX
+title: Freescale i.MX6 SoloX Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/dts/Bindings/clock/imx6ul-clock.yaml b/dts/Bindings/clock/imx6ul-clock.yaml
index 6a51a3f51c..be54d4df5a 100644
--- a/dts/Bindings/clock/imx6ul-clock.yaml
+++ b/dts/Bindings/clock/imx6ul-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 UltraLite
+title: Freescale i.MX6 UltraLite Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/dts/Bindings/clock/imx7d-clock.yaml b/dts/Bindings/clock/imx7d-clock.yaml
index cefb61db01..e7d8427e49 100644
--- a/dts/Bindings/clock/imx7d-clock.yaml
+++ b/dts/Bindings/clock/imx7d-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7 Dual
+title: Freescale i.MX7 Dual Clock Controller
 
 maintainers:
   - Frank Li <Frank.Li@nxp.com>
diff --git a/dts/Bindings/clock/imx7ulp-pcc-clock.yaml b/dts/Bindings/clock/imx7ulp-pcc-clock.yaml
index 739c3378f8..76842038f5 100644
--- a/dts/Bindings/clock/imx7ulp-pcc-clock.yaml
+++ b/dts/Bindings/clock/imx7ulp-pcc-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7ULP Peripheral Clock Control (PCC) modules
+title: Freescale i.MX7ULP Peripheral Clock Control (PCC) modules Clock Controller
 
 maintainers:
   - A.s. Dong <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/clock/imx7ulp-scg-clock.yaml b/dts/Bindings/clock/imx7ulp-scg-clock.yaml
index d06344d7e3..5e25bc6d13 100644
--- a/dts/Bindings/clock/imx7ulp-scg-clock.yaml
+++ b/dts/Bindings/clock/imx7ulp-scg-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7ULP System Clock Generation (SCG) modules
+title: Freescale i.MX7ULP System Clock Generation (SCG) modules Clock Controller
 
 maintainers:
   - A.s. Dong <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/clock/imx8m-clock.yaml b/dts/Bindings/clock/imx8m-clock.yaml
index 458c7645ee..e4c4cadec5 100644
--- a/dts/Bindings/clock/imx8m-clock.yaml
+++ b/dts/Bindings/clock/imx8m-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8M Family Clock Control Module Binding
+title: NXP i.MX8M Family Clock Control Module
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/dts/Bindings/clock/imx8qxp-lpcg.yaml b/dts/Bindings/clock/imx8qxp-lpcg.yaml
index cb80105b3c..b207f95361 100644
--- a/dts/Bindings/clock/imx8qxp-lpcg.yaml
+++ b/dts/Bindings/clock/imx8qxp-lpcg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock
 
 maintainers:
   - Aisheng Dong <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/clock/imx8ulp-cgc-clock.yaml b/dts/Bindings/clock/imx8ulp-cgc-clock.yaml
index 71f7186b13..68a60cdc19 100644
--- a/dts/Bindings/clock/imx8ulp-cgc-clock.yaml
+++ b/dts/Bindings/clock/imx8ulp-cgc-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8ULP Clock Generation & Control(CGC) Module Binding
+title: NXP i.MX8ULP Clock Generation & Control(CGC) Module
 
 maintainers:
   - Jacky Bai <ping.bai@nxp.com>
diff --git a/dts/Bindings/clock/imx8ulp-pcc-clock.yaml b/dts/Bindings/clock/imx8ulp-pcc-clock.yaml
index 00612725bf..d0b0792fe7 100644
--- a/dts/Bindings/clock/imx8ulp-pcc-clock.yaml
+++ b/dts/Bindings/clock/imx8ulp-pcc-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module Binding
+title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module
 
 maintainers:
   - Jacky Bai <ping.bai@nxp.com>
diff --git a/dts/Bindings/clock/imx93-clock.yaml b/dts/Bindings/clock/imx93-clock.yaml
index 21a06194e4..ccb53c6b96 100644
--- a/dts/Bindings/clock/imx93-clock.yaml
+++ b/dts/Bindings/clock/imx93-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX93 Clock Control Module Binding
+title: NXP i.MX93 Clock Control Module
 
 maintainers:
   - Peng Fan <peng.fan@nxp.com>
diff --git a/dts/Bindings/clock/imxrt1050-clock.yaml b/dts/Bindings/clock/imxrt1050-clock.yaml
index 03fc5c1a29..777af4aad4 100644
--- a/dts/Bindings/clock/imxrt1050-clock.yaml
+++ b/dts/Bindings/clock/imxrt1050-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MXRT
+title: Freescale i.MXRT Clock Controller
 
 maintainers:
   - Giulio Benetti <giulio.benetti@benettiengineering.com>
diff --git a/dts/Bindings/clock/ingenic,cgu.yaml b/dts/Bindings/clock/ingenic,cgu.yaml
index aa1df03ef4..9e733b10c3 100644
--- a/dts/Bindings/clock/ingenic,cgu.yaml
+++ b/dts/Bindings/clock/ingenic,cgu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs CGU devicetree bindings
+title: Ingenic SoCs CGU
 
 description: |
   The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
@@ -22,6 +22,7 @@ select:
         enum:
           - ingenic,jz4740-cgu
           - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
           - ingenic,jz4760-cgu
           - ingenic,jz4760b-cgu
           - ingenic,jz4770-cgu
@@ -51,6 +52,7 @@ properties:
       - enum:
           - ingenic,jz4740-cgu
           - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
           - ingenic,jz4760-cgu
           - ingenic,jz4760b-cgu
           - ingenic,jz4770-cgu
diff --git a/dts/Bindings/clock/intel,agilex.yaml b/dts/Bindings/clock/intel,agilex.yaml
index cf5a9eb803..3745ba8dbd 100644
--- a/dts/Bindings/clock/intel,agilex.yaml
+++ b/dts/Bindings/clock/intel,agilex.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,agilex.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel SoCFPGA Agilex platform clock controller binding
+title: Intel SoCFPGA Agilex platform clock controller
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
diff --git a/dts/Bindings/clock/intel,cgu-lgm.yaml b/dts/Bindings/clock/intel,cgu-lgm.yaml
index f3e1a700a2..76609a3904 100644
--- a/dts/Bindings/clock/intel,cgu-lgm.yaml
+++ b/dts/Bindings/clock/intel,cgu-lgm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Lightning Mountain SoC's Clock Controller(CGU) Binding
+title: Intel Lightning Mountain SoC's Clock Controller(CGU)
 
 maintainers:
   - Rahul Tanwar <rahul.tanwar@linux.intel.com>
diff --git a/dts/Bindings/clock/intel,easic-n5x.yaml b/dts/Bindings/clock/intel,easic-n5x.yaml
index 8f45976e94..e000116a51 100644
--- a/dts/Bindings/clock/intel,easic-n5x.yaml
+++ b/dts/Bindings/clock/intel,easic-n5x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,easic-n5x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel SoCFPGA eASIC N5X platform clock controller binding
+title: Intel SoCFPGA eASIC N5X platform clock controller
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
diff --git a/dts/Bindings/clock/intel,stratix10.yaml b/dts/Bindings/clock/intel,stratix10.yaml
index f506e3db97..b4a8be2134 100644
--- a/dts/Bindings/clock/intel,stratix10.yaml
+++ b/dts/Bindings/clock/intel,stratix10.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel SoCFPGA Stratix10 platform clock controller binding
+title: Intel SoCFPGA Stratix10 platform clock controller
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
diff --git a/dts/Bindings/clock/mediatek,mt8186-fhctl.yaml b/dts/Bindings/clock/mediatek,mt8186-fhctl.yaml
new file mode 100644
index 0000000000..cfd042ac1e
--- /dev/null
+++ b/dts/Bindings/clock/mediatek,mt8186-fhctl.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-fhctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek frequency hopping and spread spectrum clocking control
+
+maintainers:
+  - Edward-JW Yang <edward-jw.yang@mediatek.com>
+
+description: |
+  Frequency hopping control (FHCTL) is a piece of hardware that control
+  some PLLs to adopt "hopping" mechanism to adjust their frequency.
+  Spread spectrum clocking (SSC) is another function provided by this hardware.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-fhctl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Phandles of the PLL with FHCTL hardware capability.
+    minItems: 1
+    maxItems: 30
+
+  mediatek,hopping-ssc-percent:
+    description: The percentage of spread spectrum clocking for one PLL.
+    minItems: 1
+    maxItems: 30
+    items:
+      default: 0
+      minimum: 0
+      maximum: 8
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    fhctl: fhctl@1000ce00 {
+        compatible = "mediatek,mt8186-fhctl";
+        reg = <0x1000ce00 0x200>;
+        clocks = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+        mediatek,hopping-ssc-percent = <3>;
+    };
diff --git a/dts/Bindings/clock/microchip,mpfs-clkcfg.yaml b/dts/Bindings/clock/microchip,mpfs-clkcfg.yaml
index b2ce787222..e4e1c31267 100644
--- a/dts/Bindings/clock/microchip,mpfs-clkcfg.yaml
+++ b/dts/Bindings/clock/microchip,mpfs-clkcfg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip PolarFire Clock Control Module Binding
+title: Microchip PolarFire Clock Control Module
 
 maintainers:
   - Daire McNamara <daire.mcnamara@microchip.com>
diff --git a/dts/Bindings/clock/milbeaut-clock.yaml b/dts/Bindings/clock/milbeaut-clock.yaml
index 6d39344d2b..0af1c569eb 100644
--- a/dts/Bindings/clock/milbeaut-clock.yaml
+++ b/dts/Bindings/clock/milbeaut-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Milbeaut SoCs Clock Controller Binding
+title: Milbeaut SoCs Clock Controller
 
 maintainers:
   - Taichi Sugaya <sugaya.taichi@socionext.com>
diff --git a/dts/Bindings/clock/nuvoton,npcm845-clk.yaml b/dts/Bindings/clock/nuvoton,npcm845-clk.yaml
index 771db2ddf0..b901ca13cd 100644
--- a/dts/Bindings/clock/nuvoton,npcm845-clk.yaml
+++ b/dts/Bindings/clock/nuvoton,npcm845-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Nuvoton NPCM8XX Clock Controller Binding
+title: Nuvoton NPCM8XX Clock Controller
 
 maintainers:
   - Tomer Maimon <tmaimon77@gmail.com>
diff --git a/dts/Bindings/clock/nvidia,tegra124-dfll.txt b/dts/Bindings/clock/nvidia,tegra124-dfll.txt
index 958e0ad78c..f7d347385b 100644
--- a/dts/Bindings/clock/nvidia,tegra124-dfll.txt
+++ b/dts/Bindings/clock/nvidia,tegra124-dfll.txt
@@ -136,7 +136,7 @@ clock@70110000 {
 };
 
 /* pinmux nodes added for completeness. Binding doc can be found in:
- * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
  */
 
 pinmux: pinmux@700008d4 {
diff --git a/dts/Bindings/clock/pwm-clock.txt b/dts/Bindings/clock/pwm-clock.txt
deleted file mode 100644
index 83db876b3b..0000000000
--- a/dts/Bindings/clock/pwm-clock.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Binding for an external clock signal driven by a PWM pin.
-
-This binding uses the common clock binding[1] and the common PWM binding[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/pwm/pwm.txt
-
-Required properties:
-- compatible : shall be "pwm-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- pwms : from common PWM binding; this determines the clock frequency
-  via the period given in the PWM specifier.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-- clock-frequency : Exact output frequency, in case the PWM period
-  is not exact but was rounded to nanoseconds.
-
-Example:
-	clock {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "mipi_mclk";
-		pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
-	};
diff --git a/dts/Bindings/clock/pwm-clock.yaml b/dts/Bindings/clock/pwm-clock.yaml
new file mode 100644
index 0000000000..f88ecb2995
--- /dev/null
+++ b/dts/Bindings/clock/pwm-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/pwm-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: An external clock signal driven by a PWM pin.
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-clock
+
+  '#clock-cells':
+    const: 0
+
+  clock-frequency:
+    description: Exact output frequency, in case the PWM period is not exact
+      but was rounded to nanoseconds.
+
+  clock-output-names:
+    maxItems: 1
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+        compatible = "pwm-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+        clock-output-names = "mipi_mclk";
+        pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
+    };
+...
diff --git a/dts/Bindings/clock/qcom,a53pll.yaml b/dts/Bindings/clock/qcom,a53pll.yaml
index fe6ca4f68b..525ebaa93c 100644
--- a/dts/Bindings/clock/qcom,a53pll.yaml
+++ b/dts/Bindings/clock/qcom,a53pll.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm A53 PLL Binding
+title: Qualcomm A53 PLL clock
 
 maintainers:
   - Bjorn Andersson <andersson@kernel.org>
diff --git a/dts/Bindings/clock/qcom,a7pll.yaml b/dts/Bindings/clock/qcom,a7pll.yaml
index 0e96f693b0..809c34eb7d 100644
--- a/dts/Bindings/clock/qcom,a7pll.yaml
+++ b/dts/Bindings/clock/qcom,a7pll.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,a7pll.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm A7 PLL Binding
+title: Qualcomm A7 PLL clock
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/dts/Bindings/clock/qcom,aoncc-sm8250.yaml b/dts/Bindings/clock/qcom,aoncc-sm8250.yaml
index c40a74b5d6..8b8932bd5a 100644
--- a/dts/Bindings/clock/qcom,aoncc-sm8250.yaml
+++ b/dts/Bindings/clock/qcom,aoncc-sm8250.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs
+title: LPASS Always ON Clock Controller on SM8250 SoCs
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -17,7 +17,7 @@ description: |
 
 properties:
   compatible:
-    const: qcom,sm8250-lpass-aon
+    const: qcom,sm8250-lpass-aoncc
 
   reg:
     maxItems: 1
@@ -28,11 +28,13 @@ properties:
   clocks:
     items:
       - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
       - description: Glitch Free Mux register clock
 
   clock-names:
     items:
       - const: core
+      - const: audio
       - const: bus
 
 required:
@@ -50,9 +52,10 @@ examples:
     #include <dt-bindings/sound/qcom,q6afe.h>
     clock-controller@3800000 {
       #clock-cells = <1>;
-      compatible = "qcom,sm8250-lpass-aon";
+      compatible = "qcom,sm8250-lpass-aoncc";
       reg = <0x03380000 0x40000>;
       clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
                <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-      clock-names = "core", "bus";
+      clock-names = "core", "audio", "bus";
     };
diff --git a/dts/Bindings/clock/qcom,audiocc-sm8250.yaml b/dts/Bindings/clock/qcom,audiocc-sm8250.yaml
index 915d76206a..cfca888f60 100644
--- a/dts/Bindings/clock/qcom,audiocc-sm8250.yaml
+++ b/dts/Bindings/clock/qcom,audiocc-sm8250.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs
+title: LPASS Audio Clock Controller on SM8250 SoCs
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -28,11 +28,13 @@ properties:
   clocks:
     items:
       - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
       - description: Glitch Free Mux register clock
 
   clock-names:
     items:
       - const: core
+      - const: audio
       - const: bus
 
 required:
@@ -53,6 +55,7 @@ examples:
       compatible = "qcom,sm8250-lpass-audiocc";
       reg = <0x03300000 0x30000>;
       clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
                <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-      clock-names = "core", "bus";
+      clock-names = "core", "audio", "bus";
     };
diff --git a/dts/Bindings/clock/qcom,camcc-sm8250.yaml b/dts/Bindings/clock/qcom,camcc-sm8250.yaml
index 9f239c3960..93ec1f598e 100644
--- a/dts/Bindings/clock/qcom,camcc-sm8250.yaml
+++ b/dts/Bindings/clock/qcom,camcc-sm8250.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SM8250
+title: Qualcomm Camera Clock & Reset Controller on SM8250
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
+  Qualcomm camera clock control module provides the clocks, resets and
   power domains on SM8250.
 
-  See also dt-bindings/clock/qcom,camcc-sm8250.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,dispcc-sc8280xp.yaml b/dts/Bindings/clock/qcom,dispcc-sc8280xp.yaml
new file mode 100644
index 0000000000..3cb996b2c9
--- /dev/null
+++ b/dts/Bindings/clock/qcom,dispcc-sc8280xp.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains for the two MDSS instances on SC8280XP.
+
+  See also:
+    include/dt-bindings/clock/qcom,dispcc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-dispcc0
+      - qcom,sc8280xp-dispcc1
+
+  clocks:
+    items:
+      - description: AHB interface clock,
+      - description: SoC CXO clock
+      - description: SoC sleep clock
+      - description: DisplayPort 0 link clock
+      - description: DisplayPort 0 VCO div clock
+      - description: DisplayPort 1 link clock
+      - description: DisplayPort 1 VCO div clock
+      - description: DisplayPort 2 link clock
+      - description: DisplayPort 2 VCO div clock
+      - description: DisplayPort 3 link clock
+      - description: DisplayPort 3 VCO div clock
+      - description: DSI 0 PLL byte clock
+      - description: DSI 0 PLL DSI clock
+      - description: DSI 1 PLL byte clock
+      - description: DSI 1 PLL DSI clock
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: MMCX power domain
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc8280xp-dispcc0";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&gcc GCC_DISP_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&mdss0_dp_phy0 0>,
+               <&mdss0_dp_phy0 1>,
+               <&mdss0_dp_phy1 0>,
+               <&mdss0_dp_phy1 1>,
+               <&mdss0_dp_phy2 0>,
+               <&mdss0_dp_phy2 1>,
+               <&mdss0_dp_phy3 0>,
+               <&mdss0_dp_phy3 1>,
+               <&mdss0_dsi0_phy 0>,
+               <&mdss0_dsi0_phy 1>,
+               <&mdss0_dsi1_phy 0>,
+               <&mdss0_dsi1_phy 1>;
+      power-domains = <&rpmhpd SC8280XP_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,dispcc-sm6125.yaml b/dts/Bindings/clock/qcom,dispcc-sm6125.yaml
index 7a03ef19c9..8a210c4c5f 100644
--- a/dts/Bindings/clock/qcom,dispcc-sm6125.yaml
+++ b/dts/Bindings/clock/qcom,dispcc-sm6125.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock Controller Binding for SM6125
+title: Qualcomm Display Clock Controller on SM6125
 
 maintainers:
   - Martin Botka <martin.botka@somainline.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks and
-  power domains on SM6125.
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6125.
 
-  See also:
-    dt-bindings/clock/qcom,dispcc-sm6125.h
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6125.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,dispcc-sm6350.yaml b/dts/Bindings/clock/qcom,dispcc-sm6350.yaml
index e706678b35..8efac3fb15 100644
--- a/dts/Bindings/clock/qcom,dispcc-sm6350.yaml
+++ b/dts/Bindings/clock/qcom,dispcc-sm6350.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SM6350
+title: Qualcomm Display Clock & Reset Controller on SM6350
 
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM6350.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6350.
 
-  See also dt-bindings/clock/qcom,dispcc-sm6350.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6350.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml b/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml
index 7a8d375e05..d6774db257 100644
--- a/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -4,19 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350
+title: Qualcomm Display Clock & Reset Controller on SM8150/SM8250/SM8350
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM8150/SM8250/SM8350.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8150/SM8250/SM8350.
 
-  See also:
-    dt-bindings/clock/qcom,dispcc-sm8150.h
-    dt-bindings/clock/qcom,dispcc-sm8250.h
-    dt-bindings/clock/qcom,dispcc-sm8350.h
+  See also::
+    include/dt-bindings/clock/qcom,dispcc-sm8150.h
+    include/dt-bindings/clock/qcom,dispcc-sm8250.h
+    include/dt-bindings/clock/qcom,dispcc-sm8350.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
index 6b4efd64c1..09cd7a7868 100644
--- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml
+++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -4,22 +4,22 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for APQ8064/MSM8960
-
-allOf:
-  - $ref: qcom,gcc.yaml#
+title: Qualcomm Global Clock & Reset Controller on APQ8064/MSM8960
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on APQ8064.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8064.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8960.h
-  - dt-bindings/reset/qcom,gcc-msm8960.h
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8960.h
+    include/dt-bindings/reset/qcom,gcc-msm8960.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-apq8084.yaml b/dts/Bindings/clock/qcom,gcc-apq8084.yaml
index 397fb918e0..8ade176c24 100644
--- a/dts/Bindings/clock/qcom,gcc-apq8084.yaml
+++ b/dts/Bindings/clock/qcom,gcc-apq8084.yaml
@@ -4,19 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for APQ8084
+title: Qualcomm Global Clock & Reset Controller on APQ8084
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on APQ8084.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8084.
 
   See also::
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
+    include/dt-bindings/clock/qcom,gcc-apq8084.h
+    include/dt-bindings/reset/qcom,gcc-apq8084.h
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/Bindings/clock/qcom,gcc-ipq8064.yaml b/dts/Bindings/clock/qcom,gcc-ipq8064.yaml
index 9eb91dd225..93f3084b97 100644
--- a/dts/Bindings/clock/qcom,gcc-ipq8064.yaml
+++ b/dts/Bindings/clock/qcom,gcc-ipq8064.yaml
@@ -4,21 +4,21 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
-
-allOf:
-  - $ref: qcom,gcc.yaml#
+title: Qualcomm Global Clock & Reset Controller on IPQ8064
 
 maintainers:
   - Ansuel Smith <ansuelsmth@gmail.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on IPQ8064.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8064.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+    include/dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
@@ -27,14 +27,18 @@ properties:
       - const: syscon
 
   clocks:
+    minItems: 2
     items:
       - description: PXO source
       - description: CXO source
+      - description: PLL4 from LCC
 
   clock-names:
+    minItems: 2
     items:
       - const: pxo
       - const: cxo
+      - const: pll4
 
   thermal-sensor:
     type: object
@@ -51,13 +55,14 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     gcc: clock-controller@900000 {
       compatible = "qcom,gcc-ipq8064", "syscon";
       reg = <0x00900000 0x4000>;
-      clocks = <&pxo_board>, <&cxo_board>;
-      clock-names = "pxo", "cxo";
+      clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+      clock-names = "pxo", "cxo", "pll4";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/dts/Bindings/clock/qcom,gcc-ipq8074.yaml b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml
index 21470f52ce..deef398a98 100644
--- a/dts/Bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml
@@ -4,47 +4,39 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074
+title: Qualcomm Global Clock & Reset Controller on IPQ8074
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on IPQ8074.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8074.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-ipq8074.h
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq8074.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
     const: qcom,gcc-ipq8074
 
-  '#clock-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#power-domain-cells'
-  - '#reset-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/clock/qcom,gcc-msm8660.yaml b/dts/Bindings/clock/qcom,gcc-msm8660.yaml
index 09b2ea60d3..c9e9855486 100644
--- a/dts/Bindings/clock/qcom,gcc-msm8660.yaml
+++ b/dts/Bindings/clock/qcom,gcc-msm8660.yaml
@@ -4,22 +4,22 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8660
+title: Qualcomm Global Clock & Reset Controller on MSM8660
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks and resets on
+  Qualcomm global clock control module provides the clocks and resets on
   MSM8660
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8660.h
-  - dt-bindings/reset/qcom,gcc-msm8660.h
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8660.h
+    include/dt-bindings/reset/qcom,gcc-msm8660.h
 
 allOf:
-  - $ref: "qcom,gcc.yaml#"
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-msm8909.yaml b/dts/Bindings/clock/qcom,gcc-msm8909.yaml
index 2272ea5f78..6279a59c2e 100644
--- a/dts/Bindings/clock/qcom,gcc-msm8909.yaml
+++ b/dts/Bindings/clock/qcom,gcc-msm8909.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8909
+title: Qualcomm Global Clock & Reset Controller on MSM8909
 
 maintainers:
   - Stephan Gerhold <stephan@gerhold.net>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8909.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8909.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8909.h
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8909.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-msm8916.yaml b/dts/Bindings/clock/qcom,gcc-msm8916.yaml
index 2ceb1e501e..ad84c0f768 100644
--- a/dts/Bindings/clock/qcom,gcc-msm8916.yaml
+++ b/dts/Bindings/clock/qcom,gcc-msm8916.yaml
@@ -4,21 +4,21 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8916 and MSM8939
+title: Qualcomm Global Clock & Reset Controller on MSM8916 and MSM8939
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8916 or MSM8939.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8916 or MSM8939.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8916.h
-  - dt-bindings/clock/qcom,gcc-msm8939.h
-  - dt-bindings/reset/qcom,gcc-msm8916.h
-  - dt-bindings/reset/qcom,gcc-msm8939.h
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8916.h
+    include/dt-bindings/clock/qcom,gcc-msm8939.h
+    include/dt-bindings/reset/qcom,gcc-msm8916.h
+    include/dt-bindings/reset/qcom,gcc-msm8939.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-msm8974.yaml b/dts/Bindings/clock/qcom,gcc-msm8974.yaml
new file mode 100644
index 0000000000..1927aecc86
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-msm8974.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8974 (including Pro) and MSM8226
+  Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8974 (all variants) and MSM8226.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+    include/dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-msm8974";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-msm8976.yaml b/dts/Bindings/clock/qcom,gcc-msm8976.yaml
index 4b7d695183..d2186e25f5 100644
--- a/dts/Bindings/clock/qcom,gcc-msm8976.yaml
+++ b/dts/Bindings/clock/qcom,gcc-msm8976.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8976
+title: Qualcomm Global Clock & Reset Controller on MSM8976
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8976.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8976.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8976.h
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8976.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-msm8994.yaml b/dts/Bindings/clock/qcom,gcc-msm8994.yaml
index 7b9fef6d9b..8f0f20c144 100644
--- a/dts/Bindings/clock/qcom,gcc-msm8994.yaml
+++ b/dts/Bindings/clock/qcom,gcc-msm8994.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8994
+title: Qualcomm Global Clock & Reset Controller on MSM8994
 
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8994 and MSM8992.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8994 and MSM8992.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8994.h
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8994.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-msm8996.yaml b/dts/Bindings/clock/qcom,gcc-msm8996.yaml
index dfc5165db9..f77036ace3 100644
--- a/dts/Bindings/clock/qcom,gcc-msm8996.yaml
+++ b/dts/Bindings/clock/qcom,gcc-msm8996.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8996
+title: Qualcomm Global Clock & Reset Controller on MSM8996
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
+  Qualcomm global clock control module which provides the clocks, resets and
   power domains on MSM8996.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8996.h
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8996.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-msm8998.yaml b/dts/Bindings/clock/qcom,gcc-msm8998.yaml
index 544a2335cf..2d5355cf9d 100644
--- a/dts/Bindings/clock/qcom,gcc-msm8998.yaml
+++ b/dts/Bindings/clock/qcom,gcc-msm8998.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8998
+title: Qualcomm Global Clock & Reset Controller on MSM8998
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8998.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8998.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8998.h
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8998.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-other.yaml b/dts/Bindings/clock/qcom,gcc-other.yaml
index 76988e04c7..2e8acca64a 100644
--- a/dts/Bindings/clock/qcom,gcc-other.yaml
+++ b/dts/Bindings/clock/qcom,gcc-other.yaml
@@ -4,30 +4,27 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains.
-
-  See also:
-  - dt-bindings/clock/qcom,gcc-ipq4019.h
-  - dt-bindings/clock/qcom,gcc-ipq6018.h
-  - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-msm8953.h
-  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/clock/qcom,gcc-mdm9607.h
-  - dt-bindings/clock/qcom,gcc-mdm9615.h
-  - dt-bindings/reset/qcom,gcc-mdm9615.h
-  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq4019.h
+    include/dt-bindings/clock/qcom,gcc-ipq6018.h
+    include/dt-bindings/reset/qcom,gcc-ipq6018.h
+    include/dt-bindings/clock/qcom,gcc-msm8953.h
+    include/dt-bindings/clock/qcom,gcc-mdm9607.h
+    include/dt-bindings/clock/qcom,gcc-mdm9615.h
+    include/dt-bindings/reset/qcom,gcc-mdm9615.h
 
 allOf:
-  - $ref: "qcom,gcc.yaml#"
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
@@ -35,14 +32,8 @@ properties:
       - qcom,gcc-ipq4019
       - qcom,gcc-ipq6018
       - qcom,gcc-mdm9607
-      - qcom,gcc-msm8226
       - qcom,gcc-msm8953
-      - qcom,gcc-msm8974
-      - qcom,gcc-msm8974pro
-      - qcom,gcc-msm8974pro-ac
       - qcom,gcc-mdm9615
-      - qcom,gcc-sdm630
-      - qcom,gcc-sdm660
 
 required:
   - compatible
@@ -50,10 +41,9 @@ required:
 unevaluatedProperties: false
 
 examples:
-  # Example for GCC for MSM8974:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-msm8974";
+      compatible = "qcom,gcc-mdm9607";
       reg = <0x900000 0x4000>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/dts/Bindings/clock/qcom,gcc-qcm2290.yaml b/dts/Bindings/clock/qcom,gcc-qcm2290.yaml
index aec37e3f5e..c9bec4656f 100644
--- a/dts/Bindings/clock/qcom,gcc-qcm2290.yaml
+++ b/dts/Bindings/clock/qcom,gcc-qcm2290.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-qcm2290.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for QCM2290
+title: Qualcomm Global Clock & Reset Controller on QCM2290
 
 maintainers:
   - Shawn Guo <shawn.guo@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets
-  and power domains on QCM2290.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCM2290.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-qcm2290.h
+  See also:: include/dt-bindings/clock/qcom,gcc-qcm2290.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-qcs404.yaml b/dts/Bindings/clock/qcom,gcc-qcs404.yaml
index ce06f3f8c3..dca5775f79 100644
--- a/dts/Bindings/clock/qcom,gcc-qcs404.yaml
+++ b/dts/Bindings/clock/qcom,gcc-qcs404.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404
+title: Qualcomm Global Clock & Reset Controller on QCS404
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on QCS404.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCS404.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-qcs404.h
+  See also:: include/dt-bindings/clock/qcom,gcc-qcs404.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sc7180.yaml b/dts/Bindings/clock/qcom,gcc-sc7180.yaml
index e4d490e65d..06dce0c6b7 100644
--- a/dts/Bindings/clock/qcom,gcc-sc7180.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sc7180.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC7180
+title: Qualcomm Global Clock & Reset Controller on SC7180
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7180.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sc7280.yaml b/dts/Bindings/clock/qcom,gcc-sc7280.yaml
index ea61367e5a..947b47168c 100644
--- a/dts/Bindings/clock/qcom,gcc-sc7280.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sc7280.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc7280.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC7280
+title: Qualcomm Global Clock & Reset Controller on SC7280
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC7280.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7280.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc7280.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7280.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sc8180x.yaml b/dts/Bindings/clock/qcom,gcc-sc8180x.yaml
index 30b5d1215f..6c4846b34e 100644
--- a/dts/Bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sc8180x.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc8180x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC8180x
+title: Qualcomm Global Clock & Reset Controller on SC8180x
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC8180x.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC8180x.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc8180x.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8180x.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml b/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml
index b1bf768530..c9d8e436d7 100644
--- a/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp
+title: Qualcomm Global Clock & Reset Controller on SC8280xp
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
+  Qualcomm global clock control module provides the clocks, resets and
   power domains on SC8280xp.
 
-  See also:
-  - include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8280xp.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sdm660.yaml b/dts/Bindings/clock/qcom,gcc-sdm660.yaml
new file mode 100644
index 0000000000..52e7412aac
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-sdm660.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660/SDM630/SDM636 Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM630, SDM636 and SDM660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM660:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+        compatible = "qcom,gcc-sdm660";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-sdm845.yaml b/dts/Bindings/clock/qcom,gcc-sdm845.yaml
index e169d46c78..68e1b7822f 100644
--- a/dts/Bindings/clock/qcom,gcc-sdm845.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sdm845.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller on SDM670 and SDM845
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SDM845
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM670 and SDM845
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sdm845.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sdm845.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sdx55.yaml b/dts/Bindings/clock/qcom,gcc-sdx55.yaml
index 13ffa16e08..68d3099c96 100644
--- a/dts/Bindings/clock/qcom,gcc-sdx55.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sdx55.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SDX55
+title: Qualcomm Global Clock & Reset Controller on SDX55
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
+  Qualcomm global clock control module provides the clocks, resets and
   power domains on SDX55
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sdx55.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx55.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sdx65.yaml b/dts/Bindings/clock/qcom,gcc-sdx65.yaml
index 8a1419c4d4..ba62baab91 100644
--- a/dts/Bindings/clock/qcom,gcc-sdx65.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sdx65.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SDX65
+title: Qualcomm Global Clock & Reset Controller on SDX65
 
 maintainers:
   - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SDX65
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX65
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sdx65.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx65.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sm6115.yaml b/dts/Bindings/clock/qcom,gcc-sm6115.yaml
index bb81a27a1b..a5ad0a3da3 100644
--- a/dts/Bindings/clock/qcom,gcc-sm6115.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sm6115.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6115.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6115 and SM4250
+title: Qualcomm Global Clock & Reset Controller on SM6115 and SM4250
 
 maintainers:
   - Iskren Chernev <iskren.chernev@gmail.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM4250/6115.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM4250/6115.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6115.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6115.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sm6125.yaml b/dts/Bindings/clock/qcom,gcc-sm6125.yaml
index 03e84e1581..8e37623788 100644
--- a/dts/Bindings/clock/qcom,gcc-sm6125.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sm6125.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6125
+title: Qualcomm Global Clock & Reset Controller on SM6125
 
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM6125.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6125.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6125.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6125.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sm6350.yaml b/dts/Bindings/clock/qcom,gcc-sm6350.yaml
index cbe98c01c0..d1b26ab48e 100644
--- a/dts/Bindings/clock/qcom,gcc-sm6350.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sm6350.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6350
+title: Qualcomm Global Clock & Reset Controller on SM6350
 
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM6350.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6350.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6350.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6350.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sm8150.yaml b/dts/Bindings/clock/qcom,gcc-sm8150.yaml
index 0333ccb07d..3ea0ff37a4 100644
--- a/dts/Bindings/clock/qcom,gcc-sm8150.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sm8150.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8150
+title: Qualcomm Global Clock & Reset Controller on SM8150
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8150.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8150.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8150.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8150.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sm8250.yaml b/dts/Bindings/clock/qcom,gcc-sm8250.yaml
index 4e2a9cac0a..b752542ee2 100644
--- a/dts/Bindings/clock/qcom,gcc-sm8250.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sm8250.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8250
+title: Qualcomm Global Clock & Reset Controller on SM8250
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8250.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8250.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8250.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8250.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sm8350.yaml b/dts/Bindings/clock/qcom,gcc-sm8350.yaml
index 3edbeca70a..703d9e0752 100644
--- a/dts/Bindings/clock/qcom,gcc-sm8350.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sm8350.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8350
+title: Qualcomm Global Clock & Reset Controller on SM8350
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8350.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8350.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8350.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8350.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc-sm8450.yaml b/dts/Bindings/clock/qcom,gcc-sm8450.yaml
index 102ce6862e..9a31981fbe 100644
--- a/dts/Bindings/clock/qcom,gcc-sm8450.yaml
+++ b/dts/Bindings/clock/qcom,gcc-sm8450.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8450
+title: Qualcomm Global Clock & Reset Controller on SM8450
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8450
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8450
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8450.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8450.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gcc.yaml b/dts/Bindings/clock/qcom,gcc.yaml
index 2ed27a2ef4..7129fbcf2b 100644
--- a/dts/Bindings/clock/qcom,gcc.yaml
+++ b/dts/Bindings/clock/qcom,gcc.yaml
@@ -4,15 +4,15 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding Common Bindings
+title: Qualcomm Global Clock & Reset Controller Common Properties
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Common bindings for Qualcomm global clock control module which supports
-  the clocks, resets and power domains.
+  Common bindings for Qualcomm global clock control module providing the
+  clocks, resets and power domains.
 
 properties:
   '#clock-cells':
diff --git a/dts/Bindings/clock/qcom,gpucc-sdm660.yaml b/dts/Bindings/clock/qcom,gpucc-sdm660.yaml
index 3f70eb59aa..0518ea963c 100644
--- a/dts/Bindings/clock/qcom,gpucc-sdm660.yaml
+++ b/dts/Bindings/clock/qcom,gpucc-sdm660.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/clock/qcom,gpucc-sdm660.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding for SDM630 and SDM660
+title: Qualcomm Graphics Clock & Reset Controller on SDM630 and SDM660
 
 maintainers:
   - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
+  Qualcomm graphics clock control module provides the clocks, resets and
   power domains on SDM630 and SDM660.
 
   See also dt-bindings/clock/qcom,gpucc-sdm660.h.
diff --git a/dts/Bindings/clock/qcom,gpucc-sm8350.yaml b/dts/Bindings/clock/qcom,gpucc-sm8350.yaml
index 0a0546c079..fb7ae3d185 100644
--- a/dts/Bindings/clock/qcom,gpucc-sm8350.yaml
+++ b/dts/Bindings/clock/qcom,gpucc-sm8350.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding
+title: Qualcomm Graphics Clock & Reset Controller on SM8350
 
 maintainers:
   - Robert Foss <robert.foss@linaro.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on Qualcomm SoCs.
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
 
-  See also:
-    dt-bindings/clock/qcom,gpucc-sm8350.h
+  See also:: include/dt-bindings/clock/qcom,gpucc-sm8350.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,gpucc.yaml b/dts/Bindings/clock/qcom,gpucc.yaml
index a7d0af1bd9..7256c438a4 100644
--- a/dts/Bindings/clock/qcom,gpucc.yaml
+++ b/dts/Bindings/clock/qcom,gpucc.yaml
@@ -4,23 +4,23 @@
 $id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding
+title: Qualcomm Graphics Clock & Reset Controller
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on Qualcomm SoCs.
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
 
-  See also:
-    dt-bindings/clock/qcom,gpucc-sdm845.h
-    dt-bindings/clock/qcom,gpucc-sc7180.h
-    dt-bindings/clock/qcom,gpucc-sc7280.h
-    dt-bindings/clock/qcom,gpucc-sc8280xp.h
-    dt-bindings/clock/qcom,gpucc-sm6350.h
-    dt-bindings/clock/qcom,gpucc-sm8150.h
-    dt-bindings/clock/qcom,gpucc-sm8250.h
+  See also::
+    include/dt-bindings/clock/qcom,gpucc-sdm845.h
+    include/dt-bindings/clock/qcom,gpucc-sc7180.h
+    include/dt-bindings/clock/qcom,gpucc-sc7280.h
+    include/dt-bindings/clock/qcom,gpucc-sc8280xp.h
+    include/dt-bindings/clock/qcom,gpucc-sm6350.h
+    include/dt-bindings/clock/qcom,gpucc-sm8150.h
+    include/dt-bindings/clock/qcom,gpucc-sm8250.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,lcc.txt b/dts/Bindings/clock/qcom,lcc.txt
deleted file mode 100644
index a3c78aa880..0000000000
--- a/dts/Bindings/clock/qcom,lcc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Qualcomm LPASS Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain only one of the following:
-
-			"qcom,lcc-msm8960"
-			"qcom,lcc-apq8064"
-			"qcom,lcc-ipq8064"
-			"qcom,lcc-mdm9615"
-
-- reg : shall contain base register location and length
-- #clock-cells : shall contain 1
-- #reset-cells : shall contain 1
-
-Example:
-	clock-controller@28000000 {
-		compatible = "qcom,lcc-ipq8064";
-		reg = <0x28000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/qcom,lcc.yaml b/dts/Bindings/clock/qcom,lcc.yaml
new file mode 100644
index 0000000000..8c783823e9
--- /dev/null
+++ b/dts/Bindings/clock/qcom,lcc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,lcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Clock & Reset Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,lcc-apq8064
+      - qcom,lcc-ipq8064
+      - qcom,lcc-mdm9615
+      - qcom,lcc-msm8960
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    maxItems: 8
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-apq8064
+              - qcom,lcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+examples:
+  - |
+    clock-controller@28000000 {
+        compatible = "qcom,lcc-ipq8064";
+        reg = <0x28000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/qcom,lpasscc.txt b/dts/Bindings/clock/qcom,lpasscc.txt
deleted file mode 100644
index b9e9787045..0000000000
--- a/dts/Bindings/clock/qcom,lpasscc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Qualcomm LPASS Clock Controller Binding
------------------------------------------------
-
-Required properties :
-- compatible		: shall contain "qcom,sdm845-lpasscc"
-- #clock-cells		: from common clock binding, shall contain 1.
-- reg			: shall contain base register address and size,
-			  in the order
-			Index-0 maps to LPASS_CC register region
-			Index-1 maps to LPASS_QDSP6SS register region
-
-Optional properties :
-- reg-names	: register names of LPASS domain
-		 "cc", "qdsp6ss".
-
-Example:
-
-The below node has to be defined in the cases where the LPASS peripheral loader
-would bring the subsystem out of reset.
-
-	lpasscc: clock-controller@17014000 {
-		compatible = "qcom,sdm845-lpasscc";
-		reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
-		reg-names = "cc", "qdsp6ss";
-		#clock-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml
index 03faab5b6a..e6d17426e9 100644
--- a/dts/Bindings/clock/qcom,mmcc.yaml
+++ b/dts/Bindings/clock/qcom,mmcc.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Multimedia Clock & Reset Controller Binding
+title: Qualcomm Multimedia Clock & Reset Controller
 
 maintainers:
   - Jeffrey Hugo <quic_jhugo@quicinc.com>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm multimedia clock control module which supports the clocks, resets and
+  Qualcomm multimedia clock control module provides the clocks, resets and
   power domains.
 
 properties:
@@ -104,6 +104,44 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,mmcc-msm8974
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,mmcc-msm8994
               - qcom,mmcc-msm8998
               - qcom,mmcc-sdm630
diff --git a/dts/Bindings/clock/qcom,msm8998-gpucc.yaml b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml
index d747bb58f0..2d88979916 100644
--- a/dts/Bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding for MSM8998
+title: Qualcomm Graphics Clock & Reset Controller on MSM8998
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on MSM8998.
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on MSM8998.
 
-  See also dt-bindings/clock/qcom,gpucc-msm8998.h.
+  See also:: include/dt-bindings/clock/qcom,gpucc-msm8998.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,q6sstopcc.yaml b/dts/Bindings/clock/qcom,q6sstopcc.yaml
index bbaaf1e2a2..03fa30fe92 100644
--- a/dts/Bindings/clock/qcom,q6sstopcc.yaml
+++ b/dts/Bindings/clock/qcom,q6sstopcc.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 properties:
   compatible:
-    const: "qcom,qcs404-q6sstopcc"
+    const: qcom,qcs404-q6sstopcc
 
   reg:
     items:
diff --git a/dts/Bindings/clock/qcom,qcm2290-dispcc.yaml b/dts/Bindings/clock/qcom,qcm2290-dispcc.yaml
index 973e408c62..4a00f2d416 100644
--- a/dts/Bindings/clock/qcom,qcm2290-dispcc.yaml
+++ b/dts/Bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for qcm2290
+title: Qualcomm Display Clock & Reset Controller on QCM2290
 
 maintainers:
   - Loic Poulain <loic.poulain@linaro.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on qcm2290.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on qcm2290.
 
-  See also dt-bindings/clock/qcom,dispcc-qcm2290.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-qcm2290.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,rpmhcc.yaml b/dts/Bindings/clock/qcom,rpmhcc.yaml
index 437a34b930..cf25ba0419 100644
--- a/dts/Bindings/clock/qcom,rpmhcc.yaml
+++ b/dts/Bindings/clock/qcom,rpmhcc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. RPMh Clocks Bindings
+title: Qualcomm Technologies, Inc. RPMh Clocks
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
@@ -17,6 +17,7 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,qdu1000-rpmh-clk
       - qcom,sc7180-rpmh-clk
       - qcom,sc7280-rpmh-clk
       - qcom,sc8180x-rpmh-clk
diff --git a/dts/Bindings/clock/qcom,sc7180-camcc.yaml b/dts/Bindings/clock/qcom,sc7180-camcc.yaml
index f49027edfc..098c8acf4b 100644
--- a/dts/Bindings/clock/qcom,sc7180-camcc.yaml
+++ b/dts/Bindings/clock/qcom,sc7180-camcc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
+title: Qualcomm Camera Clock & Reset Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,camcc-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml
index e94847f927..95ad16d0ab 100644
--- a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SC7180
+title: Qualcomm Display Clock & Reset Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also dt-bindings/clock/qcom,dispcc-sc7180.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7180.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml b/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml
index c54172fbf2..f297694ef8 100644
--- a/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml
+++ b/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm LPASS Core Clock Controller Binding for SC7180
+title: Qualcomm LPASS Core Clock Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm LPASS core clock control module which supports the clocks and
-  power domains on SC7180.
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sc7180-mss.yaml b/dts/Bindings/clock/qcom,sc7180-mss.yaml
index 970030986a..1e856a8a99 100644
--- a/dts/Bindings/clock/qcom,sc7180-mss.yaml
+++ b/dts/Bindings/clock/qcom,sc7180-mss.yaml
@@ -4,16 +4,15 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Modem Clock Controller Binding for SC7180
+title: Qualcomm Modem Clock Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm modem clock control module which supports the clocks on SC7180.
+  Qualcomm modem clock control module provides the clocks on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,mss-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,mss-sc7180.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sc7280-camcc.yaml b/dts/Bindings/clock/qcom,sc7280-camcc.yaml
index f27ca6f03f..b60adbad45 100644
--- a/dts/Bindings/clock/qcom,sc7280-camcc.yaml
+++ b/dts/Bindings/clock/qcom,sc7280-camcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SC7280
+title: Qualcomm Camera Clock & Reset Controller on SC7280
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
+  Qualcomm camera clock control module provides the clocks, resets and
   power domains on SC7280.
 
-  See also dt-bindings/clock/qcom,camcc-sc7280.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sc7280-dispcc.yaml b/dts/Bindings/clock/qcom,sc7280-dispcc.yaml
index 2178666fb6..cfe6594a0a 100644
--- a/dts/Bindings/clock/qcom,sc7280-dispcc.yaml
+++ b/dts/Bindings/clock/qcom,sc7280-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SC7280
+title: Qualcomm Display Clock & Reset Controller on SC7280
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SC7280.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7280.
 
-  See also dt-bindings/clock/qcom,dispcc-sc7280.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7280.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml b/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml
index 633887dc2f..6151fdebbf 100644
--- a/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml
+++ b/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm LPASS Core Clock Controller Binding for SC7280
+title: Qualcomm LPASS Core Clock Controller on SC7280
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm LPASS core clock control module which supports the clocks and
-  power domains on SC7280.
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7280.
 
-  See also:
-  - dt-bindings/clock/qcom,lpass-sc7280.h
+  See also:: include/dt-bindings/clock/qcom,lpass-sc7280.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml
index f50e284e5f..447cdc447a 100644
--- a/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml
+++ b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -4,18 +4,18 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280
+title: Qualcomm LPASS Core & Audio Clock Controller on SC7280
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm LPASS core and audio clock control module which supports the
-  clocks and power domains on SC7280.
+  Qualcomm LPASS core and audio clock control module provides the clocks and
+  power domains on SC7280.
 
-  See also:
-  - dt-bindings/clock/qcom,lpasscorecc-sc7280.h
-  - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+  See also::
+    include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+    include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
 
 properties:
   clocks: true
diff --git a/dts/Bindings/clock/qcom,sdm845-camcc.yaml b/dts/Bindings/clock/qcom,sdm845-camcc.yaml
index d4239ccae9..91d1f79180 100644
--- a/dts/Bindings/clock/qcom,sdm845-camcc.yaml
+++ b/dts/Bindings/clock/qcom,sdm845-camcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SDM845
+title: Qualcomm Camera Clock & Reset Controller on SDM845
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
-  power domains on SDM845.
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SDM845.
 
-  See also dt-bindings/clock/qcom,camcc-sm845.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml
index 4a3be733d0..76b53ce64e 100644
--- a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SDM845
+title: Qualcomm Display Clock & Reset Controller on SDM845
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SDM845.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SDM845.
 
-  See also dt-bindings/clock/qcom,dispcc-sdm845.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-sdm845.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sdm845-lpasscc.yaml b/dts/Bindings/clock/qcom,sdm845-lpasscc.yaml
new file mode 100644
index 0000000000..a96fd837c7
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sdm845-lpasscc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 LPASS Clock Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm SDM845 LPASS (Low Power Audio SubSystem) Clock Controller.
+
+  See also:: include/dt-bindings/clock/qcom,lpass-sdm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-lpasscc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cc
+      - const: qdsp6ss
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@17014000 {
+        compatible = "qcom,sdm845-lpasscc";
+        reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+        reg-names = "cc", "qdsp6ss";
+        #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/qcom,sm6115-dispcc.yaml b/dts/Bindings/clock/qcom,sm6115-dispcc.yaml
index 6660ff16ad..f802a2e7f8 100644
--- a/dts/Bindings/clock/qcom,sm6115-dispcc.yaml
+++ b/dts/Bindings/clock/qcom,sm6115-dispcc.yaml
@@ -10,11 +10,10 @@ maintainers:
   - Bjorn Andersson <andersson@kernel.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks and
-  power domains on SM6115.
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6115.
 
-  See also:
-    include/dt-bindings/clock/qcom,sm6115-dispcc.h
+  See also:: include/dt-bindings/clock/qcom,sm6115-dispcc.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sm6375-dispcc.yaml b/dts/Bindings/clock/qcom,sm6375-dispcc.yaml
new file mode 100644
index 0000000000..183b1c75db
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sm6375-dispcc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6375.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6375.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6375-dispcc";
+      reg = <0x05f00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,sm6375-gcc.yaml b/dts/Bindings/clock/qcom,sm6375-gcc.yaml
index 3c573e1a12..295d4bb1a9 100644
--- a/dts/Bindings/clock/qcom,sm6375-gcc.yaml
+++ b/dts/Bindings/clock/qcom,sm6375-gcc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6375
+title: Qualcomm Global Clock & Reset Controller on SM6375
 
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM6375
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6375
 
-  See also:
-  - dt-bindings/clock/qcom,sm6375-gcc.h
+  See also:: include/dt-bindings/clock/qcom,sm6375-gcc.h
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/Bindings/clock/qcom,sm8450-camcc.yaml b/dts/Bindings/clock/qcom,sm8450-camcc.yaml
index 268f4c6ae0..a52a83fe28 100644
--- a/dts/Bindings/clock/qcom,sm8450-camcc.yaml
+++ b/dts/Bindings/clock/qcom,sm8450-camcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SM8450
+title: Qualcomm Camera Clock & Reset Controller on SM8450
 
 maintainers:
   - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
-  power domains on SM8450.
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM8450.
 
-  See also include/dt-bindings/clock/qcom,sm8450-camcc.h
+  See also:: include/dt-bindings/clock/qcom,sm8450-camcc.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sm8450-dispcc.yaml b/dts/Bindings/clock/qcom,sm8450-dispcc.yaml
index 1cc2457f82..1dd1f696dc 100644
--- a/dts/Bindings/clock/qcom,sm8450-dispcc.yaml
+++ b/dts/Bindings/clock/qcom,sm8450-dispcc.yaml
@@ -10,11 +10,10 @@ maintainers:
   - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM8450.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8450.
 
-  See also:
-    include/dt-bindings/clock/qcom,sm8450-dispcc.h
+  See also:: include/dt-bindings/clock/qcom,sm8450-dispcc.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/qcom,sm8550-gcc.yaml b/dts/Bindings/clock/qcom,sm8550-gcc.yaml
new file mode 100644
index 0000000000..0c706de31c
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sm8550-gcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8550
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8550-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8550-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/qcom,videocc.yaml b/dts/Bindings/clock/qcom,videocc.yaml
index 3cdbcebdc1..e221985e74 100644
--- a/dts/Bindings/clock/qcom,videocc.yaml
+++ b/dts/Bindings/clock/qcom,videocc.yaml
@@ -4,21 +4,21 @@
 $id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Video Clock & Reset Controller Binding
+title: Qualcomm Video Clock & Reset Controller
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm video clock control module which supports the clocks, resets and
-  power domains on Qualcomm SoCs.
-
-  See also:
-    dt-bindings/clock/qcom,videocc-sc7180.h
-    dt-bindings/clock/qcom,videocc-sc7280.h
-    dt-bindings/clock/qcom,videocc-sdm845.h
-    dt-bindings/clock/qcom,videocc-sm8150.h
-    dt-bindings/clock/qcom,videocc-sm8250.h
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sc7180.h
+    include/dt-bindings/clock/qcom,videocc-sc7280.h
+    include/dt-bindings/clock/qcom,videocc-sdm845.h
+    include/dt-bindings/clock/qcom,videocc-sm8150.h
+    include/dt-bindings/clock/qcom,videocc-sm8250.h
 
 properties:
   compatible:
diff --git a/dts/Bindings/clock/renesas,9series.yaml b/dts/Bindings/clock/renesas,9series.yaml
index 102eb95cb3..6b6cec3fba 100644
--- a/dts/Bindings/clock/renesas,9series.yaml
+++ b/dts/Bindings/clock/renesas,9series.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Renesas 9-series I2C PCIe clock generators
+title: Renesas 9-series I2C PCIe clock generators
 
 description: |
   The Renesas 9-series are I2C PCIe clock generators providing
diff --git a/dts/Bindings/clock/renesas,versaclock7.yaml b/dts/Bindings/clock/renesas,versaclock7.yaml
index 8d4eb4475f..b339f1f9f0 100644
--- a/dts/Bindings/clock/renesas,versaclock7.yaml
+++ b/dts/Bindings/clock/renesas,versaclock7.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas Versaclock7 Programmable Clock Device Tree Bindings
+title: Renesas Versaclock7 Programmable Clock
 
 maintainers:
   - Alex Helms <alexander.helms.jy@renesas.com>
diff --git a/dts/Bindings/clock/rockchip,rk3568-cru.yaml b/dts/Bindings/clock/rockchip,rk3568-cru.yaml
index fc7546f521..f809c28944 100644
--- a/dts/Bindings/clock/rockchip,rk3568-cru.yaml
+++ b/dts/Bindings/clock/rockchip,rk3568-cru.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROCKCHIP rk3568 Family Clock Control Module Binding
+title: ROCKCHIP rk3568 Family Clock Control Module
 
 maintainers:
   - Elaine Zhang <zhangqing@rock-chips.com>
diff --git a/dts/Bindings/clock/rockchip,rk3588-cru.yaml b/dts/Bindings/clock/rockchip,rk3588-cru.yaml
new file mode 100644
index 0000000000..74cd3f3f22
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3588-cru.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3588-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3588 Family Clock and Reset Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3588 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example it provides SCLK_UART2 and
+  PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+  module.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clock and reset IDs
+  are defined as preprocessor macros in dt-binding headers.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: xin32k
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@fd7c0000 {
+      compatible = "rockchip,rk3588-cru";
+      reg = <0xfd7c0000 0x5c000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/st,stm32mp1-rcc.yaml b/dts/Bindings/clock/st,stm32mp1-rcc.yaml
index 242fe922b0..5194be0b41 100644
--- a/dts/Bindings/clock/st,stm32mp1-rcc.yaml
+++ b/dts/Bindings/clock/st,stm32mp1-rcc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Reset Clock Controller Binding
+title: STMicroelectronics STM32MP1 Reset Clock Controller
 
 maintainers:
   - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
diff --git a/dts/Bindings/clock/ti,cdce925.txt b/dts/Bindings/clock/ti,cdce925.txt
deleted file mode 100644
index df42ab7271..0000000000
--- a/dts/Bindings/clock/ti,cdce925.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
-
-Reference
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] https://www.ti.com/product/cdce913
-[3] https://www.ti.com/product/cdce925
-[4] https://www.ti.com/product/cdce937
-[5] https://www.ti.com/product/cdce949
-
-The driver provides clock sources for each output Y1 through Y5.
-
-Required properties:
- - compatible: Shall be one of the following:
-	- "ti,cdce913": 1-PLL, 3 Outputs
-	- "ti,cdce925": 2-PLL, 5 Outputs
-	- "ti,cdce937": 3-PLL, 7 Outputs
-	- "ti,cdce949": 4-PLL, 9 Outputs
- - reg: I2C device address.
- - clocks: Points to a fixed parent clock that provides the input frequency.
- - #clock-cells: From common clock bindings: Shall be 1.
-
-Optional properties:
- - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
-                 board, or to compensate for external influences.
-- vdd-supply: A regulator node for Vdd
-- vddout-supply: A regulator node for Vddout
-
-For all PLL1, PLL2, ... an optional child node can be used to specify spread
-spectrum clocking parameters for a board.
-  - spread-spectrum: SSC mode as defined in the data sheet.
-  - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
-    present, the clock runs at the requested frequency on average. Otherwise
-    the requested frequency is the maximum value of the SCC range.
-
-
-Example:
-
-	clockgen: cdce925pw@64 {
-		compatible = "cdce925";
-		reg = <0x64>;
-		clocks = <&xtal_27Mhz>;
-		#clock-cells = <1>;
-		xtal-load-pf = <5>;
-		vdd-supply = <&1v8-reg>;
-		vddout-supply = <&3v3-reg>;
-		/* PLL options to get SSC 1% centered */
-		PLL2 {
-			spread-spectrum = <4>;
-			spread-spectrum-center;
-		};
-	};
diff --git a/dts/Bindings/clock/ti,cdce925.yaml b/dts/Bindings/clock/ti,cdce925.yaml
new file mode 100644
index 0000000000..a4ec8dd5dd
--- /dev/null
+++ b/dts/Bindings/clock/ti,cdce925.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CDCE913/925/937/949 programmable I2C clock synthesizers
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+  Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction
+
+  - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
+  - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
+  - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
+  - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
+
+properties:
+  compatible:
+    enum:
+      - ti,cdce913
+      - ti,cdce925
+      - ti,cdce937
+      - ti,cdce949
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fixed parent clock
+
+  "#clock-cells":
+    const: 1
+
+  vdd-supply:
+    description: Regulator that provides 1.8V Vdd power supply
+
+  vddout-supply:
+    description: |
+      Regulator that provides Vddout power supply.
+      non-L variant: 2.5V or 3.3V for
+      L variant: 1.8V for
+
+  xtal-load-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Crystal load-capacitor value to fine-tune performance on a
+      board, or to compensate for external influences.
+
+patternProperties:
+  "^PLL[1-4]$":
+    type: object
+    description: |
+      optional child node can be used to specify spread
+      spectrum clocking parameters for a board
+
+    additionalProperties: false
+
+    properties:
+      spread-spectrum:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: SSC mode as defined in the data sheet
+
+      spread-spectrum-center:
+        type: boolean
+        description: |
+          Use "centered" mode instead of "max" mode. When
+          present, the clock runs at the requested frequency on average.
+          Otherwise the requested frequency is the maximum value of the
+          SCC range.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdce925: clock-controller@64 {
+            compatible = "ti,cdce925";
+            reg = <0x64>;
+            clocks = <&xtal_27Mhz>;
+            #clock-cells = <1>;
+            xtal-load-pf = <5>;
+            vdd-supply = <&reg_1v8>;
+            vddout-supply = <&reg_3v3>;
+            /* PLL options to get SSC 1% centered */
+            PLL2 {
+                spread-spectrum = <4>;
+                spread-spectrum-center;
+            };
+        };
+    };
diff --git a/dts/Bindings/clock/ti,lmk04832.yaml b/dts/Bindings/clock/ti,lmk04832.yaml
index bd81738482..73d17830f1 100644
--- a/dts/Bindings/clock/ti,lmk04832.yaml
+++ b/dts/Bindings/clock/ti,lmk04832.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for the Texas Instruments LMK04832
+title: Texas Instruments LMK04832 Clock Controller
 
 maintainers:
   - Liam Beguin <liambeguin@gmail.com>
diff --git a/dts/Bindings/clock/ti,sci-clk.yaml b/dts/Bindings/clock/ti,sci-clk.yaml
index 0e370289a0..63d9763416 100644
--- a/dts/Bindings/clock/ti,sci-clk.yaml
+++ b/dts/Bindings/clock/ti,sci-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI clock controller node bindings
+title: TI-SCI clock controller
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/dts/Bindings/clock/ti/ti,clksel.yaml b/dts/Bindings/clock/ti/ti,clksel.yaml
index c56f911fff..d525f96cf2 100644
--- a/dts/Bindings/clock/ti/ti,clksel.yaml
+++ b/dts/Bindings/clock/ti/ti,clksel.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for TI clksel clock
+title: TI clksel clock
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
diff --git a/dts/Bindings/cpu/idle-states.yaml b/dts/Bindings/cpu/idle-states.yaml
index fa4d4142ac..b8cc826c95 100644
--- a/dts/Bindings/cpu/idle-states.yaml
+++ b/dts/Bindings/cpu/idle-states.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/cpu/idle-states.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Idle states binding description
+title: Idle states
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
diff --git a/dts/Bindings/cpufreq/apple,cluster-cpufreq.yaml b/dts/Bindings/cpufreq/apple,cluster-cpufreq.yaml
new file mode 100644
index 0000000000..76cb972666
--- /dev/null
+++ b/dts/Bindings/cpufreq/apple,cluster-cpufreq.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/apple,cluster-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC cluster cpufreq device
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of
+  the cluster management register block. This binding uses the standard
+  operating-points-v2 table to define the CPU performance states, with the
+  opp-level property specifying the hardware p-state index for that level.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,t8103-cluster-cpufreq
+              - apple,t8112-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+      - items:
+          - const: apple,t6000-cluster-cpufreq
+          - const: apple,t8103-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+
+  reg:
+    maxItems: 1
+
+  '#performance-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#performance-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // This example shows a single CPU per domain and 2 domains,
+    // with two p-states per domain.
+    // Shipping hardware has 2-4 CPUs per domain and 2-6 domains.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "apple,icestorm";
+        device_type = "cpu";
+        reg = <0x0 0x0>;
+        operating-points-v2 = <&ecluster_opp>;
+        performance-domains = <&cpufreq_e>;
+      };
+
+      cpu@10100 {
+        compatible = "apple,firestorm";
+        device_type = "cpu";
+        reg = <0x0 0x10100>;
+        operating-points-v2 = <&pcluster_opp>;
+        performance-domains = <&cpufreq_p>;
+      };
+    };
+
+    ecluster_opp: opp-table-0 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <7500>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <972000000>;
+        opp-level = <2>;
+        clock-latency-ns = <22000>;
+      };
+    };
+
+    pcluster_opp: opp-table-1 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <8000>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <828000000>;
+        opp-level = <2>;
+        clock-latency-ns = <19000>;
+      };
+    };
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      cpufreq_e: performance-controller@210e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x10e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+
+      cpufreq_p: performance-controller@211e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x11e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+    };
diff --git a/dts/Bindings/cpufreq/cpufreq-mediatek-hw.yaml b/dts/Bindings/cpufreq/cpufreq-mediatek-hw.yaml
index 9cd42a64b1..d0aecde2b8 100644
--- a/dts/Bindings/cpufreq/cpufreq-mediatek-hw.yaml
+++ b/dts/Bindings/cpufreq/cpufreq-mediatek-hw.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek's CPUFREQ Bindings
+title: MediaTek's CPUFREQ
 
 maintainers:
   - Hector Yuan <hector.yuan@mediatek.com>
diff --git a/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml b/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml
index 24fa3d87a4..903b31129f 100644
--- a/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -25,6 +25,7 @@ properties:
       - description: v2 of CPUFREQ HW (EPSS)
         items:
           - enum:
+              - qcom,qdu1000-cpufreq-epss
               - qcom,sm6375-cpufreq-epss
               - qcom,sm8250-cpufreq-epss
           - const: qcom,cpufreq-epss
@@ -56,6 +57,9 @@ properties:
   '#freq-domain-cells':
     const: 1
 
+  '#clock-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -83,11 +87,16 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_0>;
         qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
         L2_0: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
           L3_0: l3-cache {
             compatible = "cache";
+            cache-unified;
+            cache-level = <3>;
           };
         };
       };
@@ -99,8 +108,11 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_100>;
         qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
         L2_100: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
         };
       };
@@ -112,8 +124,11 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_200>;
         qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
         L2_200: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
         };
       };
@@ -125,8 +140,11 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_300>;
         qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
         L2_300: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
         };
       };
@@ -138,8 +156,11 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_400>;
         qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
         L2_400: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
         };
       };
@@ -151,8 +172,11 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_500>;
         qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
         L2_500: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
         };
       };
@@ -164,8 +188,11 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_600>;
         qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
         L2_600: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
         };
       };
@@ -177,8 +204,11 @@ examples:
         enable-method = "psci";
         next-level-cache = <&L2_700>;
         qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
         L2_700: l2-cache {
           compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
           next-level-cache = <&L3_0>;
         };
       };
@@ -197,6 +227,7 @@ examples:
         clock-names = "xo", "alternate";
 
         #freq-domain-cells = <1>;
+        #clock-cells = <1>;
       };
     };
 ...
diff --git a/dts/Bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/dts/Bindings/cpufreq/qcom-cpufreq-nvmem.yaml
index a11e1b8673..9c086eac6c 100644
--- a/dts/Bindings/cpufreq/qcom-cpufreq-nvmem.yaml
+++ b/dts/Bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. NVMEM CPUFreq bindings
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq
 
 maintainers:
   - Ilia Lin <ilia.lin@kernel.org>
@@ -38,7 +38,7 @@ properties:
     type: object
 
     patternProperties:
-      'cpu@[0-9a-f]+':
+      '^cpu@[0-9a-f]+$':
         type: object
 
         properties:
diff --git a/dts/Bindings/crypto/rockchip,rk3288-crypto.yaml b/dts/Bindings/crypto/rockchip,rk3288-crypto.yaml
new file mode 100644
index 0000000000..f1a9da8bff
--- /dev/null
+++ b/dts/Bindings/crypto/rockchip,rk3288-crypto.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/rockchip,rk3288-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Electronics Security Accelerator
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-crypto
+      - rockchip,rk3328-crypto
+      - rockchip,rk3399-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-crypto
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: hclk
+            - const: sclk
+            - const: apb_pclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: master
+            - const: slave
+            - const: crypto-rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+    crypto@ff8a0000 {
+      compatible = "rockchip,rk3288-crypto";
+      reg = <0xff8a0000 0x4000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+               <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+      clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+      resets = <&cru SRST_CRYPTO>;
+      reset-names = "crypto-rst";
+    };
diff --git a/dts/Bindings/crypto/rockchip-crypto.txt b/dts/Bindings/crypto/rockchip-crypto.txt
deleted file mode 100644
index 5e2ba385b8..0000000000
--- a/dts/Bindings/crypto/rockchip-crypto.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Rockchip Electronics And Security Accelerator
-
-Required properties:
-- compatible: Should be "rockchip,rk3288-crypto"
-- reg: Base physical address of the engine and length of memory mapped
-       region
-- interrupts: Interrupt number
-- clocks: Reference to the clocks about crypto
-- clock-names: "aclk" used to clock data
-	       "hclk" used to clock data
-	       "sclk" used to clock crypto accelerator
-	       "apb_pclk" used to clock dma
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-- reset-names: Must include the name "crypto-rst".
-
-Examples:
-
-	crypto: cypto-controller@ff8a0000 {
-		compatible = "rockchip,rk3288-crypto";
-		reg = <0xff8a0000 0x4000>;
-		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
-			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
-		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
-		resets = <&cru SRST_CRYPTO>;
-		reset-names = "crypto-rst";
-	};
diff --git a/dts/Bindings/crypto/st,stm32-crc.yaml b/dts/Bindings/crypto/st,stm32-crc.yaml
index b72e4858f9..50b2c2e0c3 100644
--- a/dts/Bindings/crypto/st,stm32-crc.yaml
+++ b/dts/Bindings/crypto/st,stm32-crc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-crc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CRC bindings
+title: STMicroelectronics STM32 CRC
 
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
diff --git a/dts/Bindings/crypto/st,stm32-cryp.yaml b/dts/Bindings/crypto/st,stm32-cryp.yaml
index ed23bf94a8..0ddeb8a9a7 100644
--- a/dts/Bindings/crypto/st,stm32-cryp.yaml
+++ b/dts/Bindings/crypto/st,stm32-cryp.yaml
@@ -4,7 +4,11 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CRYP bindings
+title: STMicroelectronics STM32 CRYP
+
+description: The STM32 CRYP block is built on the CRYP block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
 
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
@@ -12,6 +16,8 @@ maintainers:
 properties:
   compatible:
     enum:
+      - st,stn8820-cryp
+      - stericsson,ux500-cryp
       - st,stm32f756-cryp
       - st,stm32mp1-cryp
 
@@ -27,6 +33,19 @@ properties:
   resets:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: mem2cryp DMA channel
+      - description: cryp2mem DMA channel
+
+  dma-names:
+    items:
+      - const: mem2cryp
+      - const: cryp2mem
+
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/crypto/st,stm32-hash.yaml b/dts/Bindings/crypto/st,stm32-hash.yaml
index 10ba94792d..4ccb335e80 100644
--- a/dts/Bindings/crypto/st,stm32-hash.yaml
+++ b/dts/Bindings/crypto/st,stm32-hash.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-hash.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 HASH bindings
+title: STMicroelectronics STM32 HASH
 
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
diff --git a/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index 7910831fa4..c731fbdc2f 100644
--- a/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -12,9 +12,14 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - allwinner,sun6i-a31-mipi-dsi
-      - allwinner,sun50i-a64-mipi-dsi
+    oneOf:
+      - enum:
+          - allwinner,sun6i-a31-mipi-dsi
+          - allwinner,sun50i-a64-mipi-dsi
+          - allwinner,sun50i-a100-mipi-dsi
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dsi
+          - const: allwinner,sun50i-a100-mipi-dsi
 
   reg:
     maxItems: 1
@@ -59,7 +64,6 @@ required:
   - phys
   - phy-names
   - resets
-  - vcc-dsi-supply
   - port
 
 allOf:
@@ -68,7 +72,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun6i-a31-mipi-dsi
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a100-mipi-dsi
 
     then:
       properties:
@@ -78,16 +84,22 @@ allOf:
       required:
         - clock-names
 
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
   - if:
       properties:
         compatible:
           contains:
-            const: allwinner,sun50i-a64-mipi-dsi
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a64-mipi-dsi
 
     then:
-      properties:
-        clocks:
-          minItems: 1
+      required:
+        - vcc-dsi-supply
 
 unevaluatedProperties: false
 
diff --git a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml
index 7cdffdb131..74cefdf1b8 100644
--- a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
-  - $ref: /schemas/sound/name-prefix.yaml#
+  - $ref: /schemas/sound/dai-common.yaml#
 
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
diff --git a/dts/Bindings/display/arm,hdlcd.yaml b/dts/Bindings/display/arm,hdlcd.yaml
index a2670258c4..9a30e9005e 100644
--- a/dts/Bindings/display/arm,hdlcd.yaml
+++ b/dts/Bindings/display/arm,hdlcd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Arm HDLCD display controller binding
+title: Arm HDLCD display controller
 
 maintainers:
   - Liviu Dudau <Liviu.Dudau@arm.com>
diff --git a/dts/Bindings/display/arm,malidp.yaml b/dts/Bindings/display/arm,malidp.yaml
index 2a17ec6fc9..91812573fd 100644
--- a/dts/Bindings/display/arm,malidp.yaml
+++ b/dts/Bindings/display/arm,malidp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/arm,malidp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Arm Mali Display Processor (Mali-DP) binding
+title: Arm Mali Display Processor (Mali-DP)
 
 maintainers:
   - Liviu Dudau <Liviu.Dudau@arm.com>
diff --git a/dts/Bindings/display/bridge/anx6345.yaml b/dts/Bindings/display/bridge/anx6345.yaml
index 1c0406c38f..9bf2cbcea6 100644
--- a/dts/Bindings/display/bridge/anx6345.yaml
+++ b/dts/Bindings/display/bridge/anx6345.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+title: Analogix ANX6345 eDP Transmitter
 
 maintainers:
   - Torsten Duwe <duwe@lst.de>
diff --git a/dts/Bindings/display/bridge/chrontel,ch7033.yaml b/dts/Bindings/display/bridge/chrontel,ch7033.yaml
index bb6289c7d3..b0589fa167 100644
--- a/dts/Bindings/display/bridge/chrontel,ch7033.yaml
+++ b/dts/Bindings/display/bridge/chrontel,ch7033.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Chrontel CH7033 Video Encoder Device Tree Bindings
+title: Chrontel CH7033 Video Encoder
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/dts/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/dts/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml
index 89490fdffe..0b27df429b 100644
--- a/dts/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml
+++ b/dts/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for Ingenic JZ4780 HDMI Transmitter
+title: Ingenic JZ4780 HDMI Transmitter
 
 maintainers:
   - H. Nikolaus Schaller <hns@goldelico.com>
diff --git a/dts/Bindings/display/bridge/intel,keembay-dsi.yaml b/dts/Bindings/display/bridge/intel,keembay-dsi.yaml
index dcb1336ee2..958a073f4f 100644
--- a/dts/Bindings/display/bridge/intel,keembay-dsi.yaml
+++ b/dts/Bindings/display/bridge/intel,keembay-dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay mipi dsi controller
+title: Intel Keem Bay mipi dsi controller
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/dts/Bindings/display/bridge/ite,it6505.yaml b/dts/Bindings/display/bridge/ite,it6505.yaml
index 833d11b230..b697c42399 100644
--- a/dts/Bindings/display/bridge/ite,it6505.yaml
+++ b/dts/Bindings/display/bridge/ite,it6505.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it6505 Device Tree Bindings
+title: ITE it6505
 
 maintainers:
   - Allen Chen <allen.chen@ite.com.tw>
diff --git a/dts/Bindings/display/bridge/ite,it66121.yaml b/dts/Bindings/display/bridge/ite,it66121.yaml
index 1b2185be92..d3454da124 100644
--- a/dts/Bindings/display/bridge/ite,it66121.yaml
+++ b/dts/Bindings/display/bridge/ite,it66121.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it66121 HDMI bridge Device Tree Bindings
+title: ITE it66121 HDMI bridge
 
 maintainers:
   - Phong LE <ple@baylibre.com>
diff --git a/dts/Bindings/display/bridge/ps8640.yaml b/dts/Bindings/display/bridge/ps8640.yaml
index 8ab156e0a8..28811aff2c 100644
--- a/dts/Bindings/display/bridge/ps8640.yaml
+++ b/dts/Bindings/display/bridge/ps8640.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+title: MIPI DSI to eDP Video Format Converter
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
diff --git a/dts/Bindings/display/bridge/renesas,dsi.yaml b/dts/Bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 0000000000..131d5b63ec
--- /dev/null
+++ b/dts/Bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI DSI Encoder
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This binding describes the MIPI DSI encoder embedded in the Renesas
+  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
+  up to four data lanes.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+      - const: renesas,rzg2l-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Sequence operation channel 0 interrupt
+      - description: Sequence operation channel 1 interrupt
+      - description: Video-Input operation channel 1 interrupt
+      - description: DSI Packet Receive interrupt
+      - description: DSI Fatal Error interrupt
+      - description: DSI D-PHY PPI interrupt
+      - description: Debug interrupt
+
+  interrupt-names:
+    items:
+      - const: seq0
+      - const: seq1
+      - const: vin1
+      - const: rcv
+      - const: ferr
+      - const: ppi
+      - const: debug
+
+  clocks:
+    items:
+      - description: DSI D-PHY PLL multiplied clock
+      - description: DSI D-PHY system clock
+      - description: DSI AXI bus clock
+      - description: DSI Register access clock
+      - description: DSI Video clock
+      - description: DSI D-PHY Escape mode transmit clock
+
+  clock-names:
+    items:
+      - const: pllclk
+      - const: sysclk
+      - const: aclk
+      - const: pclk
+      - const: vclk
+      - const: lpclk
+
+  resets:
+    items:
+      - description: MIPI_DSI_CMN_RSTB
+      - description: MIPI_DSI_ARESET_N
+      - description: MIPI_DSI_PRESET_N
+
+  reset-names:
+    items:
+      - const: rst
+      - const: arst
+      - const: prst
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi0: dsi@10850000 {
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10850000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&adv7535_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.yaml b/dts/Bindings/display/bridge/toshiba,tc358767.yaml
index ed280053ec..1409278844 100644
--- a/dts/Bindings/display/bridge/toshiba,tc358767.yaml
+++ b/dts/Bindings/display/bridge/toshiba,tc358767.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba TC358767 eDP bridge bindings
+title: Toshiba TC358767 eDP bridge
 
 maintainers:
   - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
diff --git a/dts/Bindings/display/bridge/toshiba,tc358775.yaml b/dts/Bindings/display/bridge/toshiba,tc358775.yaml
index 10471c6c1f..d879c70059 100644
--- a/dts/Bindings/display/bridge/toshiba,tc358775.yaml
+++ b/dts/Bindings/display/bridge/toshiba,tc358775.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba TC358775 DSI to LVDS bridge bindings
+title: Toshiba TC358775 DSI to LVDS bridge
 
 maintainers:
   - Vinay Simha BN <simhavcs@gmail.com>
diff --git a/dts/Bindings/display/fsl,lcdif.yaml b/dts/Bindings/display/fsl,lcdif.yaml
index 876015a44a..75b4efd70b 100644
--- a/dts/Bindings/display/fsl,lcdif.yaml
+++ b/dts/Bindings/display/fsl,lcdif.yaml
@@ -52,6 +52,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: The LCDIF output port
@@ -81,12 +84,48 @@ allOf:
           maxItems: 3
       required:
         - clock-names
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-lcdif
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          minItems: 3
+          maxItems: 3
+      required:
+        - clock-names
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-lcdif
+                - fsl,imx8mp-lcdif
+    then:
       properties:
         clocks:
           maxItems: 1
         clock-names:
           maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sl-lcdif
+              - fsl,imx6sx-lcdif
+              - fsl,imx8mm-lcdif
+              - fsl,imx8mn-lcdif
+              - fsl,imx8mp-lcdif
+    then:
+      required:
+        - power-domains
 
 examples:
   - |
@@ -101,6 +140,7 @@ examples:
                  <&clks IMX6SX_CLK_LCDIF_APB>,
                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
         clock-names = "pix", "axi", "disp_axi";
+        power-domains = <&pd_disp>;
 
         port {
             endpoint {
diff --git a/dts/Bindings/display/imx/fsl,imx-fb.txt b/dts/Bindings/display/imx/fsl,imx-fb.txt
deleted file mode 100644
index f4df9e83bc..0000000000
--- a/dts/Bindings/display/imx/fsl,imx-fb.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Freescale imx21 Framebuffer
-
-This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
-
-Required properties:
-- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : One interrupt of the fb dev
-
-Required nodes:
-- display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/panel/display-timing.txt
-	Additional, the display node has to define properties:
-	- bits-per-pixel: Bits per pixel
-	- fsl,pcr: LCDC PCR value
-	A display node may optionally define
-	- fsl,aus-mode: boolean to enable AUS mode (only for imx21)
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-- fsl,dmacr: DMA Control Register value. This is optional. By default, the
-	register is not modified as recommended by the datasheet.
-- fsl,lpccr: Contrast Control Register value. This property provides the
-	default value for the contrast control register.
-	If that property is omitted, the register is zeroed.
-- fsl,lscr1: LCDC Sharp Configuration Register value.
-
-Example:
-
-	imxfb: fb@10021000 {
-		compatible = "fsl,imx21-fb";
-		interrupts = <61>;
-		reg = <0x10021000 0x1000>;
-		display = <&display0>;
-	};
-
-	...
-
-	display0: display0 {
-		model = "Primeview-PD050VL1";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			native-mode = <&timing_disp0>;
-			timing_disp0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};
diff --git a/dts/Bindings/display/imx/fsl,imx-lcdc.yaml b/dts/Bindings/display/imx/fsl,imx-lcdc.yaml
new file mode 100644
index 0000000000..35a8fff036
--- /dev/null
+++ b/dts/Bindings/display/imx/fsl,imx-lcdc.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Pengutronix Kernel Team <kernel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-fb
+          - fsl,imx21-fb
+      - items:
+          - enum:
+              - fsl,imx25-fb
+              - fsl,imx27-fb
+          - const: fsl,imx21-fb
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+      - const: per
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  lcd-supply:
+    description:
+      Regulator for LCD supply voltage.
+
+  fsl,dmacr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Override value for DMA Control Register
+
+  fsl,lpccr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Contrast Control Register value.
+
+  fsl,lscr1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      LCDC Sharp Configuration Register value.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - display
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imxfb: fb@10021000 {
+        compatible = "fsl,imx21-fb";
+        interrupts = <61>;
+        reg = <0x10021000 0x1000>;
+        display = <&display0>;
+        clocks = <&clks 103>, <&clks 49>, <&clks 66>;
+        clock-names = "ipg", "ahb", "per";
+    };
+
+    display0: display0 {
+        model = "Primeview-PD050VL1";
+        bits-per-pixel = <16>;
+        fsl,pcr = <0xf0c88080>; /* non-standard but required */
+
+        display-timings {
+            native-mode = <&timing_disp0>;
+            timing_disp0: timing0 {
+                hactive = <640>;
+                vactive = <480>;
+                hback-porch = <112>;
+                hfront-porch = <36>;
+                hsync-len = <32>;
+                vback-porch = <33>;
+                vfront-porch = <33>;
+                vsync-len = <2>;
+                clock-frequency = <25000000>;
+            };
+        };
+    };
diff --git a/dts/Bindings/display/ingenic,ipu.yaml b/dts/Bindings/display/ingenic,ipu.yaml
index 3f93def2c5..319bd7c88f 100644
--- a/dts/Bindings/display/ingenic,ipu.yaml
+++ b/dts/Bindings/display/ingenic,ipu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ingenic,ipu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs Image Processing Unit (IPU) devicetree bindings
+title: Ingenic SoCs Image Processing Unit (IPU)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/display/ingenic,lcd.yaml b/dts/Bindings/display/ingenic,lcd.yaml
index c0bb02fb49..6d4c00f3fc 100644
--- a/dts/Bindings/display/ingenic,lcd.yaml
+++ b/dts/Bindings/display/ingenic,lcd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ingenic,lcd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs LCD controller devicetree bindings
+title: Ingenic SoCs LCD controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/display/intel,keembay-display.yaml b/dts/Bindings/display/intel,keembay-display.yaml
index bc6622b010..2cf54ecc70 100644
--- a/dts/Bindings/display/intel,keembay-display.yaml
+++ b/dts/Bindings/display/intel,keembay-display.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/intel,keembay-display.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay display controller
+title: Intel Keem Bay display controller
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/dts/Bindings/display/intel,keembay-msscam.yaml b/dts/Bindings/display/intel,keembay-msscam.yaml
index a222b52d8b..cc7e1f318f 100644
--- a/dts/Bindings/display/intel,keembay-msscam.yaml
+++ b/dts/Bindings/display/intel,keembay-msscam.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay MSSCAM
+title: Intel Keem Bay MSSCAM
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/dts/Bindings/display/mediatek/mediatek,cec.yaml b/dts/Bindings/display/mediatek/mediatek,cec.yaml
index 66288b9f0a..080cf32120 100644
--- a/dts/Bindings/display/mediatek/mediatek,cec.yaml
+++ b/dts/Bindings/display/mediatek/mediatek,cec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI CEC Controller Device Tree Bindings
+title: Mediatek HDMI CEC Controller
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
diff --git a/dts/Bindings/display/mediatek/mediatek,dpi.yaml b/dts/Bindings/display/mediatek/mediatek,dpi.yaml
index 5bb23e97cf..d976380801 100644
--- a/dts/Bindings/display/mediatek/mediatek,dpi.yaml
+++ b/dts/Bindings/display/mediatek/mediatek,dpi.yaml
@@ -23,6 +23,7 @@ properties:
       - mediatek,mt8173-dpi
       - mediatek,mt8183-dpi
       - mediatek,mt8186-dpi
+      - mediatek,mt8188-dp-intf
       - mediatek,mt8192-dpi
       - mediatek,mt8195-dp-intf
 
diff --git a/dts/Bindings/display/mediatek/mediatek,dsi.yaml b/dts/Bindings/display/mediatek/mediatek,dsi.yaml
index b18d6a57c6..4707b60238 100644
--- a/dts/Bindings/display/mediatek/mediatek,dsi.yaml
+++ b/dts/Bindings/display/mediatek/mediatek,dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek DSI Controller Device Tree Bindings
+title: MediaTek DSI Controller
 
 maintainers:
   - Chun-Kuang Hu <chunkuang.hu@kernel.org>
diff --git a/dts/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/dts/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml
index b6fcdfb99a..bd8f7b8ae0 100644
--- a/dts/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml
+++ b/dts/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI DDC Device Tree Bindings
+title: Mediatek HDMI DDC
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
diff --git a/dts/Bindings/display/mediatek/mediatek,hdmi.yaml b/dts/Bindings/display/mediatek/mediatek,hdmi.yaml
index bdaf0b51e6..8afdd67d67 100644
--- a/dts/Bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/dts/Bindings/display/mediatek/mediatek,hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI Encoder Device Tree Bindings
+title: Mediatek HDMI Encoder
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
diff --git a/dts/Bindings/display/msm/dpu-common.yaml b/dts/Bindings/display/msm/dpu-common.yaml
new file mode 100644
index 0000000000..8ffbc30c6b
--- /dev/null
+++ b/dts/Bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,52 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description: |
+  Common properties for QCom DPU display controller.
+
+properties:
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc.
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+    # at least one port is required
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - interrupts
+  - power-domains
+  - operating-points-v2
+  - ports
+
+additionalProperties: true
diff --git a/dts/Bindings/display/msm/dpu-msm8998.yaml b/dts/Bindings/display/msm/dpu-msm8998.yaml
deleted file mode 100644
index 253665c693..0000000000
--- a/dts/Bindings/display/msm/dpu-msm8998.yaml
+++ /dev/null
@@ -1,223 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for MSM8998 target
-
-maintainers:
-  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for MSM8998 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,msm8998-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock
-      - description: Display AXI clock
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: bus
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-    additionalProperties: false
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,msm8998-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for regdma register set
-          - description: Address offset and size for vbif register set
-          - description: Address offset and size for non-realtime vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: regdma
-          - const: vbif
-          - const: vbif_nrt
-
-      clocks:
-        items:
-          - description: Display ahb clock
-          - description: Display axi clock
-          - description: Display mem-noc clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: iface
-          - const: bus
-          - const: mnoc
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-      opp-table:
-        type: object
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@1:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF2 (DSI2)
-
-        required:
-          - port@0
-          - port@1
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    mdss: display-subsystem@c900000 {
-        compatible = "qcom,msm8998-mdss";
-        reg = <0x0c900000 0x1000>;
-        reg-names = "mdss";
-
-        clocks = <&mmcc MDSS_AHB_CLK>,
-                 <&mmcc MDSS_AXI_CLK>,
-                 <&mmcc MDSS_MDP_CLK>;
-        clock-names = "iface", "bus", "core";
-
-        #address-cells = <1>;
-        #interrupt-cells = <1>;
-        #size-cells = <1>;
-
-        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-        interrupt-controller;
-        iommus = <&mmss_smmu 0>;
-
-        power-domains = <&mmcc MDSS_GDSC>;
-        ranges;
-
-        display-controller@c901000 {
-            compatible = "qcom,msm8998-dpu";
-            reg = <0x0c901000 0x8f000>,
-                  <0x0c9a8e00 0xf0>,
-                  <0x0c9b0000 0x2008>,
-                  <0x0c9b8000 0x1040>;
-            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
-
-            clocks = <&mmcc MDSS_AHB_CLK>,
-                     <&mmcc MDSS_AXI_CLK>,
-                     <&mmcc MNOC_AHB_CLK>,
-                     <&mmcc MDSS_MDP_CLK>,
-                     <&mmcc MDSS_VSYNC_CLK>;
-            clock-names = "iface", "bus", "mnoc", "core", "vsync";
-
-            interrupt-parent = <&mdss>;
-            interrupts = <0>;
-            operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmpd MSM8998_VDDMX>;
-
-            ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                port@0 {
-                    reg = <0>;
-                    dpu_intf1_out: endpoint {
-                        remote-endpoint = <&dsi0_in>;
-                    };
-                };
-
-                port@1 {
-                    reg = <1>;
-                    dpu_intf2_out: endpoint {
-                        remote-endpoint = <&dsi1_in>;
-                    };
-                };
-            };
-        };
-    };
-...
diff --git a/dts/Bindings/display/msm/dpu-qcm2290.yaml b/dts/Bindings/display/msm/dpu-qcm2290.yaml
deleted file mode 100644
index c5824e1d23..0000000000
--- a/dts/Bindings/display/msm/dpu-qcm2290.yaml
+++ /dev/null
@@ -1,222 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for QCM2290 target
-
-maintainers:
-  - Loic Poulain <loic.poulain@linaro.org>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
-  and DPU are mentioned for QCM2290 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,qcm2290-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AXI clock
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: bus
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
-
-  resets:
-    items:
-      - description: MDSS_CORE reset
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-    additionalProperties: false
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,qcm2290-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display AXI clock from gcc
-          - description: Display AHB clock from dispcc
-          - description: Display core clock from dispcc
-          - description: Display lut clock from dispcc
-          - description: Display vsync clock from dispcc
-
-      clock-names:
-        items:
-          - const: bus
-          - const: iface
-          - const: core
-          - const: lut
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-      opp-table:
-        type: object
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-        required:
-          - port@0
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
-    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interconnect/qcom,qcm2290.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    mdss: mdss@5e00000 {
-        #address-cells = <1>;
-        #size-cells = <1>;
-        compatible = "qcom,qcm2290-mdss";
-        reg = <0x05e00000 0x1000>;
-        reg-names = "mdss";
-        power-domains = <&dispcc MDSS_GDSC>;
-        clocks = <&gcc GCC_DISP_AHB_CLK>,
-                 <&gcc GCC_DISP_HF_AXI_CLK>,
-                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
-        clock-names = "iface", "bus", "core";
-
-        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
-
-        iommus = <&apps_smmu 0x420 0x2>,
-                 <&apps_smmu 0x421 0x0>;
-        ranges;
-
-        mdss_mdp: display-controller@5e01000 {
-                compatible = "qcom,qcm2290-dpu";
-                reg = <0x05e01000 0x8f000>,
-                      <0x05eb0000 0x2008>;
-                reg-names = "mdp", "vbif";
-
-                clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
-                         <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                         <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                         <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
-                         <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                clock-names = "bus", "iface", "core", "lut", "vsync";
-
-                operating-points-v2 = <&mdp_opp_table>;
-                power-domains = <&rpmpd QCM2290_VDDCX>;
-
-                interrupt-parent = <&mdss>;
-                interrupts = <0>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@0 {
-                                reg = <0>;
-                                dpu_intf1_out: endpoint {
-                                        remote-endpoint = <&dsi0_in>;
-                                };
-                        };
-                };
-         };
-    };
-...
diff --git a/dts/Bindings/display/msm/dpu-sc7180.yaml b/dts/Bindings/display/msm/dpu-sc7180.yaml
deleted file mode 100644
index 4890bc25f3..0000000000
--- a/dts/Bindings/display/msm/dpu-sc7180.yaml
+++ /dev/null
@@ -1,235 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SC7180 target
-
-maintainers:
-  - Krishna Manikandan <quic_mkrishn@quicinc.com>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SC7180 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,sc7180-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AHB clock from dispcc
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: ahb
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
-
-  resets:
-    items:
-      - description: MDSS_CORE reset
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-    additionalProperties: false
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,sc7180-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display hf axi clock
-          - description: Display ahb clock
-          - description: Display rotator clock
-          - description: Display lut clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: bus
-          - const: iface
-          - const: rot
-          - const: lut
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-      opp-table:
-        type: object
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@2:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF0 (DP)
-
-        required:
-          - port@0
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interconnect/qcom,sdm845.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-         #address-cells = <1>;
-         #size-cells = <1>;
-         compatible = "qcom,sc7180-mdss";
-         reg = <0xae00000 0x1000>;
-         reg-names = "mdss";
-         power-domains = <&dispcc MDSS_GDSC>;
-         clocks = <&gcc GCC_DISP_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
-         clock-names = "iface", "ahb", "core";
-
-         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-         interrupt-controller;
-         #interrupt-cells = <1>;
-
-         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-         interconnect-names = "mdp0-mem";
-
-         iommus = <&apps_smmu 0x800 0x2>;
-         ranges;
-
-         display-controller@ae01000 {
-                   compatible = "qcom,sc7180-dpu";
-                   reg = <0x0ae01000 0x8f000>,
-                         <0x0aeb0000 0x2008>;
-
-                   reg-names = "mdp", "vbif";
-
-                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
-                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                            <&dispcc DISP_CC_MDSS_ROT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                   clock-names = "bus", "iface", "rot", "lut", "core",
-                                 "vsync";
-
-                   interrupt-parent = <&mdss>;
-                   interrupts = <0>;
-                   power-domains = <&rpmhpd SC7180_CX>;
-                   operating-points-v2 = <&mdp_opp_table>;
-
-                   ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                                  remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                            port@2 {
-                                    reg = <2>;
-                                    dpu_intf0_out: endpoint {
-                                                   remote-endpoint = <&dp_in>;
-                                    };
-                            };
-                   };
-         };
-    };
-...
diff --git a/dts/Bindings/display/msm/dpu-sc7280.yaml b/dts/Bindings/display/msm/dpu-sc7280.yaml
deleted file mode 100644
index 584d646021..0000000000
--- a/dts/Bindings/display/msm/dpu-sc7280.yaml
+++ /dev/null
@@ -1,239 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SC7280
-
-maintainers:
-  - Krishna Manikandan <quic_mkrishn@quicinc.com>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SC7280.
-
-properties:
-  compatible:
-    const: qcom,sc7280-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AHB clock from dispcc
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: ahb
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
-
-  resets:
-    items:
-      - description: MDSS_CORE reset
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-    additionalProperties: false
-
-    properties:
-      compatible:
-        const: qcom,sc7280-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display hf axi clock
-          - description: Display sf axi clock
-          - description: Display ahb clock
-          - description: Display lut clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: bus
-          - const: nrt_bus
-          - const: iface
-          - const: lut
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-      opp-table:
-        type: object
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI)
-
-          port@1:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF5 (EDP)
-
-        required:
-          - port@0
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
-    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interconnect/qcom,sc7280.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-         #address-cells = <1>;
-         #size-cells = <1>;
-         compatible = "qcom,sc7280-mdss";
-         reg = <0xae00000 0x1000>;
-         reg-names = "mdss";
-         power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
-         clocks = <&gcc GCC_DISP_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
-         clock-names = "iface",
-                       "ahb",
-                       "core";
-
-         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-         interrupt-controller;
-         #interrupt-cells = <1>;
-
-         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-         interconnect-names = "mdp0-mem";
-
-         iommus = <&apps_smmu 0x900 0x402>;
-         ranges;
-
-         display-controller@ae01000 {
-                   compatible = "qcom,sc7280-dpu";
-                   reg = <0x0ae01000 0x8f000>,
-                         <0x0aeb0000 0x2008>;
-
-                   reg-names = "mdp", "vbif";
-
-                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
-                            <&gcc GCC_DISP_SF_AXI_CLK>,
-                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                   clock-names = "bus",
-                                 "nrt_bus",
-                                 "iface",
-                                 "lut",
-                                 "core",
-                                 "vsync";
-
-                   interrupt-parent = <&mdss>;
-                   interrupts = <0>;
-                   power-domains = <&rpmhpd SC7280_CX>;
-                   operating-points-v2 = <&mdp_opp_table>;
-
-                   ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                           remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                           port@1 {
-                                   reg = <1>;
-                                   dpu_intf5_out: endpoint {
-                                           remote-endpoint = <&edp_in>;
-                                   };
-                           };
-                   };
-         };
-    };
-...
diff --git a/dts/Bindings/display/msm/dpu-sdm845.yaml b/dts/Bindings/display/msm/dpu-sdm845.yaml
deleted file mode 100644
index 7d10373731..0000000000
--- a/dts/Bindings/display/msm/dpu-sdm845.yaml
+++ /dev/null
@@ -1,217 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SDM845 target
-
-maintainers:
-  - Krishna Manikandan <quic_mkrishn@quicinc.com>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SDM845 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,sdm845-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
-  ranges: true
-
-  resets:
-    items:
-      - description: MDSS_CORE reset
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-    additionalProperties: false
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,sdm845-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display ahb clock
-          - description: Display axi clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: iface
-          - const: bus
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-      opp-table:
-        type: object
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@1:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF2 (DSI2)
-
-        required:
-          - port@0
-          - port@1
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-          #address-cells = <1>;
-          #size-cells = <1>;
-          compatible = "qcom,sdm845-mdss";
-          reg = <0x0ae00000 0x1000>;
-          reg-names = "mdss";
-          power-domains = <&dispcc MDSS_GDSC>;
-
-          clocks = <&gcc GCC_DISP_AHB_CLK>,
-                   <&dispcc DISP_CC_MDSS_MDP_CLK>;
-          clock-names = "iface", "core";
-
-          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-controller;
-          #interrupt-cells = <1>;
-
-          iommus = <&apps_smmu 0x880 0x8>,
-                   <&apps_smmu 0xc80 0x8>;
-          ranges;
-
-          display-controller@ae01000 {
-                    compatible = "qcom,sdm845-dpu";
-                    reg = <0x0ae01000 0x8f000>,
-                          <0x0aeb0000 0x2008>;
-                    reg-names = "mdp", "vbif";
-
-                    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                             <&dispcc DISP_CC_MDSS_AXI_CLK>,
-                             <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                             <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                    clock-names = "iface", "bus", "core", "vsync";
-
-                    interrupt-parent = <&mdss>;
-                    interrupts = <0>;
-                    power-domains = <&rpmhpd SDM845_CX>;
-                    operating-points-v2 = <&mdp_opp_table>;
-
-                    ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                                  remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                           port@1 {
-                                   reg = <1>;
-                                   dpu_intf2_out: endpoint {
-                                                  remote-endpoint = <&dsi1_in>;
-                                   };
-                           };
-                    };
-          };
-    };
-...
diff --git a/dts/Bindings/display/msm/dsi-controller-main.yaml b/dts/Bindings/display/msm/dsi-controller-main.yaml
index 3b609c19e0..f2c143730a 100644
--- a/dts/Bindings/display/msm/dsi-controller-main.yaml
+++ b/dts/Bindings/display/msm/dsi-controller-main.yaml
@@ -49,6 +49,7 @@ properties:
     maxItems: 1
 
   phy-names:
+    deprecated: true
     const: dsi
 
   "#address-cells": true
@@ -80,6 +81,9 @@ properties:
 
   operating-points-v2: true
 
+  opp-table:
+    type: object
+
   ports:
     $ref: "/schemas/graph.yaml#/properties/ports"
     description: |
@@ -131,7 +135,6 @@ required:
   - clocks
   - clock-names
   - phys
-  - phy-names
   - assigned-clocks
   - assigned-clock-parents
   - power-domains
diff --git a/dts/Bindings/display/msm/dsi-phy-14nm.yaml b/dts/Bindings/display/msm/dsi-phy-14nm.yaml
index 1342d74ecf..819de5ce0b 100644
--- a/dts/Bindings/display/msm/dsi-phy-14nm.yaml
+++ b/dts/Bindings/display/msm/dsi-phy-14nm.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - qcom,dsi-phy-14nm
+      - qcom,dsi-phy-14nm-2290
       - qcom,dsi-phy-14nm-660
       - qcom,dsi-phy-14nm-8953
 
diff --git a/dts/Bindings/display/msm/gmu.yaml b/dts/Bindings/display/msm/gmu.yaml
index 67fdeeabae..ab14e81cb0 100644
--- a/dts/Bindings/display/msm/gmu.yaml
+++ b/dts/Bindings/display/msm/gmu.yaml
@@ -6,7 +6,7 @@
 $id: "http://devicetree.org/schemas/display/msm/gmu.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Devicetree bindings for the GMU attached to certain Adreno GPUs
+title: GMU attached to certain Adreno GPUs
 
 maintainers:
   - Rob Clark <robdclark@gmail.com>
diff --git a/dts/Bindings/display/msm/gpu.yaml b/dts/Bindings/display/msm/gpu.yaml
index ec4b1a75f4..c5f49842dc 100644
--- a/dts/Bindings/display/msm/gpu.yaml
+++ b/dts/Bindings/display/msm/gpu.yaml
@@ -5,7 +5,7 @@
 $id: "http://devicetree.org/schemas/display/msm/gpu.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Devicetree bindings for the Adreno or Snapdragon GPUs
+title: Adreno or Snapdragon GPUs
 
 maintainers:
   - Rob Clark <robdclark@gmail.com>
diff --git a/dts/Bindings/display/msm/mdp5.txt b/dts/Bindings/display/msm/mdp5.txt
index 43d11279c9..65d03c58de 100644
--- a/dts/Bindings/display/msm/mdp5.txt
+++ b/dts/Bindings/display/msm/mdp5.txt
@@ -2,37 +2,9 @@ Qualcomm adreno/snapdragon MDP5 display controller
 
 Description:
 
-This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
-encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
+This is the bindings documentation for the MDP5 display
 controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
 
-MDSS:
-Required properties:
-- compatible:
-  * "qcom,mdss" - MDSS
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
-  * "mdss_phys"
-  * "vbif_phys"
-- interrupts: The interrupt signal from MDSS.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "iface"
-  * "bus"
-  * "vsync"
-- #address-cells: number of address cells for the MDSS children. Should be 1.
-- #size-cells: Should be 1.
-- ranges: parent bus address space is the same as the child bus address space.
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut"
-
 MDP5:
 Required properties:
 - compatible:
diff --git a/dts/Bindings/display/msm/mdss-common.yaml b/dts/Bindings/display/msm/mdss-common.yaml
new file mode 100644
index 0000000000..27d7242657
--- /dev/null
+++ b/dts/Bindings/display/msm/mdss-common.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display MDSS common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+properties:
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    minItems: 1
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: true
diff --git a/dts/Bindings/display/msm/qcom,mdss.yaml b/dts/Bindings/display/msm/qcom,mdss.yaml
new file mode 100644
index 0000000000..ba04602687
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,mdss.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Mobile Display SubSystem (MDSS)
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
+  encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
+
+properties:
+  compatible:
+    enum:
+      - qcom,mdss
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: mdss_phys
+      - const: vbif_phys
+      - const: vbif_nrt_phys
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+    description: |
+      The MDSS power domain provided by GCC
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Display abh clock
+      - description: Display axi clock
+      - description: Display vsync clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: iface
+      - const: bus
+      - const: vsync
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - power-domains
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "^mdp@[1-9a-f][0-9a-f]*$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdp5
+
+  "^dsi@[1-9a-f][0-9a-f]*$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[1-9a-f][0-9a-f]*$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,dsi-phy-14nm
+          - qcom,dsi-phy-14nm-660
+          - qcom,dsi-phy-14nm-8953
+          - qcom,dsi-phy-20nm
+          - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-lp
+
+  "^hdmi-phy@[1-9a-f][0-9a-f]*$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,hdmi-phy-8084
+          - qcom,hdmi-phy-8660
+          - qcom,hdmi-phy-8960
+          - qcom,hdmi-phy-8974
+          - qcom,hdmi-phy-8996
+
+  "^hdmi-tx@[1-9a-f][0-9a-f]*$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,hdmi-tx-8084
+          - qcom,hdmi-tx-8660
+          - qcom,hdmi-tx-8960
+          - qcom,hdmi-tx-8974
+          - qcom,hdmi-tx-8994
+          - qcom,hdmi-tx-8996
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mdss@1a00000 {
+        compatible = "qcom,mdss";
+        reg = <0x1a00000 0x1000>,
+              <0x1ac8000 0x3000>;
+        reg-names = "mdss_phys", "vbif_phys";
+
+        power-domains = <&gcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                 <&gcc GCC_MDSS_AXI_CLK>,
+                 <&gcc GCC_MDSS_VSYNC_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "vsync";
+
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        mdp@1a01000 {
+            compatible = "qcom,mdp5";
+            reg = <0x01a01000 0x89000>;
+            reg-names = "mdp_phys";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                     <&gcc GCC_MDSS_AXI_CLK>,
+                     <&gcc GCC_MDSS_MDP_CLK>,
+                     <&gcc GCC_MDSS_VSYNC_CLK>;
+            clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync";
+
+            iommus = <&apps_iommu 4>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdp5_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml b/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml
new file mode 100644
index 0000000000..b02adba36e
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for MSM8998 target
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for regdma register set
+      - description: Address offset and size for vbif register set
+      - description: Address offset and size for non-realtime vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: regdma
+      - const: vbif
+      - const: vbif_nrt
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display mem-noc clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: mnoc
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@c901000 {
+        compatible = "qcom,msm8998-dpu";
+        reg = <0x0c901000 0x8f000>,
+              <0x0c9a8e00 0xf0>,
+              <0x0c9b0000 0x2008>,
+              <0x0c9b8000 0x1040>;
+        reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MNOC_AHB_CLK>,
+                 <&mmcc MDSS_MDP_CLK>,
+                 <&mmcc MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd MSM8998_VDDMX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml b/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml
new file mode 100644
index 0000000000..cf52ff77a4
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 Display MDSS
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for MSM8998 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,msm8998-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm-8998
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@c900000 {
+        compatible = "qcom,msm8998-mdss";
+        reg = <0x0c900000 0x1000>;
+        reg-names = "mdss";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        #address-cells = <1>;
+        #interrupt-cells = <1>;
+        #size-cells = <1>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        iommus = <&mmss_smmu 0>;
+
+        power-domains = <&mmcc MDSS_GDSC>;
+        ranges;
+
+        display-controller@c901000 {
+            compatible = "qcom,msm8998-dpu";
+            reg = <0x0c901000 0x8f000>,
+                  <0x0c9a8e00 0xf0>,
+                  <0x0c9b0000 0x2008>,
+                  <0x0c9b8000 0x1040>;
+            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>,
+                     <&mmcc MNOC_AHB_CLK>,
+                     <&mmcc MDSS_MDP_CLK>,
+                     <&mmcc MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDMX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@c994000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0c994000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&mmcc MDSS_BYTE0_CLK>,
+                     <&mmcc MDSS_BYTE0_INTF_CLK>,
+                     <&mmcc MDSS_PCLK0_CLK>,
+                     <&mmcc MDSS_ESC0_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@c994400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c994400 0x200>,
+                  <0x0c994600 0x280>,
+                  <0x0c994a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+
+        dsi@c996000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0c996000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&mmcc MDSS_BYTE1_CLK>,
+                     <&mmcc MDSS_BYTE1_INTF_CLK>,
+                     <&mmcc MDSS_PCLK1_CLK>,
+                     <&mmcc MDSS_ESC1_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@c996400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c996400 0x200>,
+                  <0x0c996600 0x280>,
+                  <0x0c996a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml b/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml
new file mode 100644
index 0000000000..a7b382f01b
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for QCM2290 target
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qcm2290-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock from dispcc
+      - description: Display lut clock from dispcc
+      - description: Display vsync clock from dispcc
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,qcm2290-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd QCM2290_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml b/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml
new file mode 100644
index 0000000000..d6f043a4b0
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM220 Display MDSS
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for QCM2290 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qcm2290-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,qcm2290-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,qcm2290-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,qcm2290-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,dsi-ctrl-6g-qcm2290";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+            vcca-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml b/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml
new file mode 100644
index 0000000000..bd590a6b5b
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SC7180 target
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sc7180-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: rot
+      - const: lut
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7180-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "rot", "lut", "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&dp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml b/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml
new file mode 100644
index 0000000000..13e396d61a
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -0,0 +1,304 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7180 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sc7180-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7180-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7180-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7180-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "ahb", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7180-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7180_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            phys = <&dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7180-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface", "core_aux", "ctrl_link",
+                          "ctrl_link_iface", "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml b/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml
new file mode 100644
index 0000000000..924059b387
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SC7280
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7280-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7280_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&edp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml b/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml
new file mode 100644
index 0000000000..a3de1744ba
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -0,0 +1,422 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7280.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^edp@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-edp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7280-dsi-phy-7nm
+          - qcom,sc7280-edp-phy
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7280-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x900 0x402>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7280-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7280_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf5_out: endpoint {
+                        remote-endpoint = <&edp_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            phys = <&mdss_dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi_phy: phy@ae94400 {
+            compatible = "qcom,sc7280-dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x280>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        edp@aea0000 {
+            compatible = "qcom,sc7280-edp";
+            pinctrl-names = "default";
+            pinctrl-0 = <&edp_hot_plug_det>;
+
+            reg = <0xaea0000 0x200>,
+                  <0xaea0200 0x200>,
+                  <0xaea0400 0xc00>,
+                  <0xaea1000 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <14>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+            phys = <&mdss_edp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&edp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    edp_in: endpoint {
+                        remote-endpoint = <&dpu_intf5_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_edp_out: endpoint { };
+                };
+            };
+
+            edp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        mdss_edp_phy: phy@aec2a00 {
+            compatible = "qcom,sc7280-edp-phy";
+
+            reg = <0xaec2a00 0x19c>,
+                  <0xaec2200 0xa0>,
+                  <0xaec2600 0xa0>,
+                  <0xaec2000 0x1c0>;
+
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_EDP_CLKREF_EN>;
+            clock-names = "aux",
+                          "cfg_ahb";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7280-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml b/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml
new file mode 100644
index 0000000000..5719b45f28
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SDM845 target
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sdm845-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display GCC bus clock
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: gcc-bus
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sdm845-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SDM845_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml b/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml
new file mode 100644
index 0000000000..31ca6f99fc
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SDM845 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sdm845-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sdm845-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sdm845-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm845-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM845_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml b/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml
new file mode 100644
index 0000000000..4a39a30314
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SM6115 target
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm6115-dpu
+
+  reg:
+    items:
+      - description: MDP register set
+      - description: VBIF register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI
+      - description: Display AHB
+      - description: Display core
+      - description: Display lut
+      - description: Display rotator
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: rot
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,sm6115-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd SM6115_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml
new file mode 100644
index 0000000000..a86d7f53fa
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for SM6115 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm6115-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  iommus:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6115-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sm6115-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6115-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,dsi-ctrl-6g-qcm2290";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+            phys = <&dsi0_phy>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml
new file mode 100644
index 0000000000..9ff8a265c8
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8250-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display hf axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8250-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "core", "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8250_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml
new file mode 100644
index 0000000000..0d3be5386b
--- /dev/null
+++ b/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -0,0 +1,330 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM8250 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8250-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8250-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8250-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x820 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8250-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8250_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8250_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8250_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/dts/Bindings/display/panel/display-timings.yaml b/dts/Bindings/display/panel/display-timings.yaml
index 6d30575819..dc5f7e36e3 100644
--- a/dts/Bindings/display/panel/display-timings.yaml
+++ b/dts/Bindings/display/panel/display-timings.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: display timings bindings
+title: display timings
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
diff --git a/dts/Bindings/display/panel/ilitek,ili9163.yaml b/dts/Bindings/display/panel/ilitek,ili9163.yaml
index 7e7a8362b9..90e323e19e 100644
--- a/dts/Bindings/display/panel/ilitek,ili9163.yaml
+++ b/dts/Bindings/display/panel/ilitek,ili9163.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ilitek ILI9163 display panels device tree bindings
+title: Ilitek ILI9163 display panels
 
 maintainers:
   - Daniel Mack <daniel@zonque.org>
@@ -15,6 +15,7 @@ description:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -41,7 +42,7 @@ required:
   - dc-gpios
   - reset-gpios
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/display/panel/ilitek,ili9341.yaml b/dts/Bindings/display/panel/ilitek,ili9341.yaml
index 99e0cb9440..94f169ea06 100644
--- a/dts/Bindings/display/panel/ilitek,ili9341.yaml
+++ b/dts/Bindings/display/panel/ilitek,ili9341.yaml
@@ -16,6 +16,7 @@ description: |
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/jadard,jd9365da-h3.yaml b/dts/Bindings/display/panel/jadard,jd9365da-h3.yaml
new file mode 100644
index 0000000000..c06902e4fe
--- /dev/null
+++ b/dts/Bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jadard JD9365DA-HE WXGA DSI panel
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - chongzhou,cz101b4001
+      - const: jadard,jd9365da-h3
+
+  reg: true
+
+  vdd-supply:
+    description: supply regulator for VDD, usually 3.3V
+
+  vccio-supply:
+    description: supply regulator for VCCIO, usually 1.8V
+
+  reset-gpios: true
+
+  backlight: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vccio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3";
+            reg = <0>;
+            vdd-supply = <&lcd_3v3>;
+            vccio-supply = <&vcca_1v8>;
+            reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/panel/nec,nl8048hl11.yaml b/dts/Bindings/display/panel/nec,nl8048hl11.yaml
index aa788eaa2f..3b09b35902 100644
--- a/dts/Bindings/display/panel/nec,nl8048hl11.yaml
+++ b/dts/Bindings/display/panel/nec,nl8048hl11.yaml
@@ -15,6 +15,7 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -34,7 +35,7 @@ required:
   - reset-gpios
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/display/panel/newvision,nv3051d.yaml b/dts/Bindings/display/panel/newvision,nv3051d.yaml
new file mode 100644
index 0000000000..116c1b6030
--- /dev/null
+++ b/dts/Bindings/display/panel/newvision,nv3051d.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NewVision NV3051D based LCD panel
+
+description: |
+  The NewVision NV3051D is a driver chip used to drive DSI panels. For now,
+  this driver only supports the 640x480 panels found in the Anbernic RG353
+  based devices.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - anbernic,rg353p-panel
+          - anbernic,rg353v-panel
+      - const: newvision,nv3051d
+
+  reg: true
+  backlight: true
+  port: true
+  reset-gpios:
+    description: Active low reset GPIO
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml b/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml
index 2329d9610f..9f97598efd 100644
--- a/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml
+++ b/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+title: Olimex Ltd. LCD-OLinuXino bridge panel.
 
 maintainers:
   - Stefan Mavrodiev <stefan@olimex.com>
diff --git a/dts/Bindings/display/panel/panel-lvds.yaml b/dts/Bindings/display/panel/panel-lvds.yaml
index fcc50db6a8..c77ee03431 100644
--- a/dts/Bindings/display/panel/panel-lvds.yaml
+++ b/dts/Bindings/display/panel/panel-lvds.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic LVDS Display Panel Device Tree Bindings
+title: Generic LVDS Display Panel
 
 maintainers:
   - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
diff --git a/dts/Bindings/display/panel/panel-timing.yaml b/dts/Bindings/display/panel/panel-timing.yaml
index 229e3b36ee..0d317e61ed 100644
--- a/dts/Bindings/display/panel/panel-timing.yaml
+++ b/dts/Bindings/display/panel/panel-timing.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: panel timing bindings
+title: panel timing
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
diff --git a/dts/Bindings/display/panel/samsung,lms380kf01.yaml b/dts/Bindings/display/panel/samsung,lms380kf01.yaml
index 251f0c7115..70ffc88d2a 100644
--- a/dts/Bindings/display/panel/samsung,lms380kf01.yaml
+++ b/dts/Bindings/display/panel/samsung,lms380kf01.yaml
@@ -9,14 +9,13 @@ title: Samsung LMS380KF01 display panel
 description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
   Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
   used with internal or external backlight control.
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -59,7 +58,7 @@ required:
   - spi-cpol
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/display/panel/samsung,lms397kf04.yaml b/dts/Bindings/display/panel/samsung,lms397kf04.yaml
index cd62968426..5e77cee93f 100644
--- a/dts/Bindings/display/panel/samsung,lms397kf04.yaml
+++ b/dts/Bindings/display/panel/samsung,lms397kf04.yaml
@@ -14,6 +14,7 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -51,7 +52,7 @@ required:
   - spi-cpol
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/display/panel/samsung,s6d27a1.yaml b/dts/Bindings/display/panel/samsung,s6d27a1.yaml
index 26e3c820a2..d273faf444 100644
--- a/dts/Bindings/display/panel/samsung,s6d27a1.yaml
+++ b/dts/Bindings/display/panel/samsung,s6d27a1.yaml
@@ -7,14 +7,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S6D27A1 display panel
 
 description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile
-  Displays (SMD). The panel must obey the rules for a SPI slave device
-  as specified in spi/spi-controller.yaml
+  Displays (SMD).
 
 maintainers:
   - Markuss Broks <markuss.broks@gmail.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/tpo,tpg110.yaml b/dts/Bindings/display/panel/tpo,tpg110.yaml
index 6f1f02044b..f0243d1961 100644
--- a/dts/Bindings/display/panel/tpo,tpg110.yaml
+++ b/dts/Bindings/display/panel/tpo,tpg110.yaml
@@ -41,6 +41,7 @@ description: |+
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/visionox,rm69299.yaml b/dts/Bindings/display/panel/visionox,rm69299.yaml
index 076b057b4a..481ef051df 100644
--- a/dts/Bindings/display/panel/visionox,rm69299.yaml
+++ b/dts/Bindings/display/panel/visionox,rm69299.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Visionox model RM69299 Panels Device Tree Bindings.
+title: Visionox model RM69299 Panels
 
 maintainers:
   - Harigovindan P <harigovi@codeaurora.org>
diff --git a/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml
index 9ab123cd23..5cdbc527a5 100644
--- a/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml
+++ b/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -128,7 +128,6 @@ examples:
         resets = <&tegra_car 181>;
         reset-names = "dpaux";
         power-domains = <&pd_sor>;
-        status = "disabled";
 
         state_dpaux_aux: pinmux-aux {
             groups = "dpaux-io";
diff --git a/dts/Bindings/display/tegra/nvidia,tegra186-display.yaml b/dts/Bindings/display/tegra/nvidia,tegra186-display.yaml
index 8c02313455..ce5c673f94 100644
--- a/dts/Bindings/display/tegra/nvidia,tegra186-display.yaml
+++ b/dts/Bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -138,7 +138,6 @@ examples:
                  <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
                  <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
         clock-names = "disp", "dsc", "hub";
-        status = "disabled";
 
         power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 
@@ -227,7 +226,6 @@ examples:
         clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
                  <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
         clock-names = "disp", "hub";
-        status = "disabled";
 
         power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
 
diff --git a/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
index 10ec78ca1c..554f9d5809 100644
--- a/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
+++ b/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -117,6 +117,45 @@ properties:
       - const: dp-phy0
       - const: dp-phy1
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Connections to the programmable logic and the DisplayPort PHYs. Each port
+      shall have a single endpoint.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live video input from the programmable logic
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live graphics input from the programmable logic
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live audio input from the programmable logic
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The blended video output to the programmable logic
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The mixed audio output to the programmable logic
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The DisplayPort output
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+
 required:
   - compatible
   - reg
@@ -130,6 +169,7 @@ required:
   - dma-names
   - phys
   - phy-names
+  - ports
 
 additionalProperties: false
 
@@ -164,6 +204,33 @@ examples:
                <&psgtr 0 PHY_TYPE_DP 1 3>;
 
         phy-names = "dp-phy0", "dp-phy1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+            };
+            port@1 {
+                reg = <1>;
+            };
+            port@2 {
+                reg = <2>;
+            };
+            port@3 {
+                reg = <3>;
+            };
+            port@4 {
+                reg = <4>;
+            };
+            port@5 {
+                reg = <5>;
+                dpsub_dp_out: endpoint {
+                    remote-endpoint = <&dp_connector>;
+                };
+            };
+        };
     };
 
 ...
diff --git a/dts/Bindings/dma/apple,admac.yaml b/dts/Bindings/dma/apple,admac.yaml
index 3b1e667f7e..97282469e4 100644
--- a/dts/Bindings/dma/apple,admac.yaml
+++ b/dts/Bindings/dma/apple,admac.yaml
@@ -56,6 +56,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/dma/dma-common.yaml b/dts/Bindings/dma/dma-common.yaml
index ad06d36af2..ea700f8ee6 100644
--- a/dts/Bindings/dma/dma-common.yaml
+++ b/dts/Bindings/dma/dma-common.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/dma-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Engine Generic Binding
+title: DMA Engine Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
diff --git a/dts/Bindings/dma/dma-controller.yaml b/dts/Bindings/dma/dma-controller.yaml
index 6d3727267f..538ebadff6 100644
--- a/dts/Bindings/dma/dma-controller.yaml
+++ b/dts/Bindings/dma/dma-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/dma-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Controller Generic Binding
+title: DMA Controller Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
diff --git a/dts/Bindings/dma/dma-router.yaml b/dts/Bindings/dma/dma-router.yaml
index 4b817f5dc3..f8d8c3c88b 100644
--- a/dts/Bindings/dma/dma-router.yaml
+++ b/dts/Bindings/dma/dma-router.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/dma-router.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Router Generic Binding
+title: DMA Router Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
diff --git a/dts/Bindings/dma/ingenic,dma.yaml b/dts/Bindings/dma/ingenic,dma.yaml
index 3b0b3b919a..fd5b0a8eae 100644
--- a/dts/Bindings/dma/ingenic,dma.yaml
+++ b/dts/Bindings/dma/ingenic,dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs DMA Controller DT bindings
+title: Ingenic SoCs DMA Controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -18,6 +18,7 @@ properties:
       - enum:
           - ingenic,jz4740-dma
           - ingenic,jz4725b-dma
+          - ingenic,jz4755-dma
           - ingenic,jz4760-dma
           - ingenic,jz4760-bdma
           - ingenic,jz4760-mdma
diff --git a/dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml b/dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml
index c8894476b6..851bd50ee6 100644
--- a/dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml
+++ b/dts/Bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -39,7 +39,7 @@ properties:
       Should contain all of the per-channel DMA interrupts in
       ascending order with respect to the DMA channel index.
     minItems: 1
-    maxItems: 31
+    maxItems: 32
 
   resets:
     maxItems: 1
@@ -52,6 +52,9 @@ properties:
 
   dma-coherent: true
 
+  dma-channel-mask:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -60,6 +63,7 @@ required:
   - reset-names
   - "#dma-cells"
   - iommus
+  - dma-channel-mask
 
 additionalProperties: false
 
@@ -108,5 +112,6 @@ examples:
         #dma-cells = <1>;
         iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
         dma-coherent;
+        dma-channel-mask = <0xfffffffe>;
     };
 ...
diff --git a/dts/Bindings/dma/qcom,gpi.yaml b/dts/Bindings/dma/qcom,gpi.yaml
index eabf8a76d3..e7ba1c47a8 100644
--- a/dts/Bindings/dma/qcom,gpi.yaml
+++ b/dts/Bindings/dma/qcom,gpi.yaml
@@ -18,14 +18,24 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-gpi-dma
-      - qcom,sdm845-gpi-dma
-      - qcom,sm6350-gpi-dma
-      - qcom,sm8150-gpi-dma
-      - qcom,sm8250-gpi-dma
-      - qcom,sm8350-gpi-dma
-      - qcom,sm8450-gpi-dma
+    oneOf:
+      - enum:
+          - qcom,sdm845-gpi-dma
+          - qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,sc7280-gpi-dma
+              - qcom,sm6115-gpi-dma
+              - qcom,sm6375-gpi-dma
+              - qcom,sm8350-gpi-dma
+              - qcom,sm8450-gpi-dma
+          - const: qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,sdm670-gpi-dma
+              - qcom,sm8150-gpi-dma
+              - qcom,sm8250-gpi-dma
+          - const: qcom,sdm845-gpi-dma
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/dma/snps,dw-axi-dmac.yaml b/dts/Bindings/dma/snps,dw-axi-dmac.yaml
index 67aa7bb6d3..ad107a4d3b 100644
--- a/dts/Bindings/dma/snps,dw-axi-dmac.yaml
+++ b/dts/Bindings/dma/snps,dw-axi-dmac.yaml
@@ -8,7 +8,6 @@ title: Synopsys DesignWare AXI DMA Controller
 
 maintainers:
   - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-  - Jee Heng Sia <jee.heng.sia@intel.com>
 
 description:
   Synopsys DesignWare AXI DMA Controller DT Binding
diff --git a/dts/Bindings/dma/st,stm32-dma.yaml b/dts/Bindings/dma/st,stm32-dma.yaml
index 55faab6a46..158c791d7c 100644
--- a/dts/Bindings/dma/st,stm32-dma.yaml
+++ b/dts/Bindings/dma/st,stm32-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 DMA Controller bindings
+title: STMicroelectronics STM32 DMA Controller
 
 description: |
   The STM32 DMA is a general-purpose direct memory access controller capable of
diff --git a/dts/Bindings/dma/st,stm32-dmamux.yaml b/dts/Bindings/dma/st,stm32-dmamux.yaml
index 1e1d8549b7..3e0b82d277 100644
--- a/dts/Bindings/dma/st,stm32-dmamux.yaml
+++ b/dts/Bindings/dma/st,stm32-dmamux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
+title: STMicroelectronics STM32 DMA MUX (DMA request router)
 
 maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
diff --git a/dts/Bindings/dma/st,stm32-mdma.yaml b/dts/Bindings/dma/st,stm32-mdma.yaml
index 00cfa39136..08a59bd69a 100644
--- a/dts/Bindings/dma/st,stm32-mdma.yaml
+++ b/dts/Bindings/dma/st,stm32-mdma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 MDMA Controller bindings
+title: STMicroelectronics STM32 MDMA Controller
 
 description: |
   The STM32 MDMA is a general-purpose direct memory access controller capable of
diff --git a/dts/Bindings/dma/ti/k3-bcdma.yaml b/dts/Bindings/dma/ti/k3-bcdma.yaml
index 08627d91e6..a702d2c2ff 100644
--- a/dts/Bindings/dma/ti/k3-bcdma.yaml
+++ b/dts/Bindings/dma/ti/k3-bcdma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings
+title: Texas Instruments K3 DMSS BCDMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
diff --git a/dts/Bindings/dma/ti/k3-pktdma.yaml b/dts/Bindings/dma/ti/k3-pktdma.yaml
index 507d16d84a..a69f62f854 100644
--- a/dts/Bindings/dma/ti/k3-pktdma.yaml
+++ b/dts/Bindings/dma/ti/k3-pktdma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 DMSS PKTDMA Device Tree Bindings
+title: Texas Instruments K3 DMSS PKTDMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
diff --git a/dts/Bindings/dma/ti/k3-udma.yaml b/dts/Bindings/dma/ti/k3-udma.yaml
index 6a09bbf83d..7ff428ad3a 100644
--- a/dts/Bindings/dma/ti/k3-udma.yaml
+++ b/dts/Bindings/dma/ti/k3-udma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
+title: Texas Instruments K3 NAVSS Unified DMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
diff --git a/dts/Bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/dts/Bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
index 2a595b18ff..825294e3f0 100644
--- a/dts/Bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
+++ b/dts/Bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
+title: Xilinx ZynqMP DisplayPort DMA Controller
 
 description: |
   These bindings describe the DMA engine included in the Xilinx ZynqMP
diff --git a/dts/Bindings/edac/dmc-520.yaml b/dts/Bindings/edac/dmc-520.yaml
index 3b6842e92d..84db396666 100644
--- a/dts/Bindings/edac/dmc-520.yaml
+++ b/dts/Bindings/edac/dmc-520.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/edac/dmc-520.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM DMC-520 EDAC bindings
+title: ARM DMC-520 EDAC
 
 maintainers:
   - Lei Wang <lewan@microsoft.com>
diff --git a/dts/Bindings/eeprom/at24.yaml b/dts/Bindings/eeprom/at24.yaml
index d14e0accbd..84af0d5f52 100644
--- a/dts/Bindings/eeprom/at24.yaml
+++ b/dts/Bindings/eeprom/at24.yaml
@@ -10,6 +10,9 @@ title: I2C EEPROMs compatible with Atmel's AT24
 maintainers:
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
 
+allOf:
+  - $ref: /schemas/nvmem/nvmem.yaml
+
 select:
   properties:
     compatible:
@@ -183,7 +186,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/eeprom/at25.yaml b/dts/Bindings/eeprom/at25.yaml
index 8b1c997caa..0f5a8ef996 100644
--- a/dts/Bindings/eeprom/at25.yaml
+++ b/dts/Bindings/eeprom/at25.yaml
@@ -104,6 +104,7 @@ required:
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
   - if:
       properties:
         compatible:
diff --git a/dts/Bindings/eeprom/microchip,93lc46b.yaml b/dts/Bindings/eeprom/microchip,93lc46b.yaml
index 0c2f5ddb79..144e86ce5c 100644
--- a/dts/Bindings/eeprom/microchip,93lc46b.yaml
+++ b/dts/Bindings/eeprom/microchip,93lc46b.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/eeprom/microchip,93lc46b.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
+title: Microchip 93xx46 SPI compatible EEPROM family
 
 maintainers:
   - Cory Tusar <cory.tusar@pid1solutions.com>
@@ -47,6 +47,7 @@ required:
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
 
 unevaluatedProperties: false
 
diff --git a/dts/Bindings/example-schema.yaml b/dts/Bindings/example-schema.yaml
index 8e1a8b19d4..dfcf4c27d4 100644
--- a/dts/Bindings/example-schema.yaml
+++ b/dts/Bindings/example-schema.yaml
@@ -11,7 +11,7 @@ $id: http://devicetree.org/schemas/example-schema.yaml#
 # $schema is the meta-schema this schema should be validated with.
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: An example schema annotated with jsonschema details
+title: An Example Device
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml b/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml
index 2d82b44268..2e5b398814 100644
--- a/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml
+++ b/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -40,6 +40,7 @@ examples:
         cros-ec@0 {
             compatible = "google,cros-ec-spi";
             reg = <0>;
+            interrupts = <44 0>;
 
             usbc_extcon0: extcon0 {
                 compatible = "google,extcon-usbc-cros-ec";
diff --git a/dts/Bindings/firmware/arm,scmi.yaml b/dts/Bindings/firmware/arm,scmi.yaml
index 1c0388da67..176796931a 100644
--- a/dts/Bindings/firmware/arm,scmi.yaml
+++ b/dts/Bindings/firmware/arm,scmi.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/firmware/arm,scmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Control and Management Interface (SCMI) Message Protocol bindings
+title: System Control and Management Interface (SCMI) Message Protocol
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
diff --git a/dts/Bindings/firmware/arm,scpi.yaml b/dts/Bindings/firmware/arm,scpi.yaml
index 1f9322925e..241317239f 100644
--- a/dts/Bindings/firmware/arm,scpi.yaml
+++ b/dts/Bindings/firmware/arm,scpi.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/firmware/arm,scpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Control and Power Interface (SCPI) Message Protocol bindings
+title: System Control and Power Interface (SCPI) Message Protocol
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
diff --git a/dts/Bindings/firmware/qcom,scm.yaml b/dts/Bindings/firmware/qcom,scm.yaml
index c5b76c9f7a..25688571ee 100644
--- a/dts/Bindings/firmware/qcom,scm.yaml
+++ b/dts/Bindings/firmware/qcom,scm.yaml
@@ -41,12 +41,14 @@ properties:
           - qcom,scm-sc7180
           - qcom,scm-sc7280
           - qcom,scm-sc8280xp
+          - qcom,scm-sdm670
           - qcom,scm-sdm845
           - qcom,scm-sdx55
           - qcom,scm-sdx65
           - qcom,scm-sm6115
           - qcom,scm-sm6125
           - qcom,scm-sm6350
+          - qcom,scm-sm6375
           - qcom,scm-sm8150
           - qcom,scm-sm8250
           - qcom,scm-sm8350
@@ -88,6 +90,7 @@ allOf:
               - qcom,scm-apq8064
               - qcom,scm-msm8660
               - qcom,scm-msm8960
+              - qcom,scm-sm6375
     then:
       properties:
         clock-names:
diff --git a/dts/Bindings/firmware/qemu,fw-cfg-mmio.yaml b/dts/Bindings/firmware/qemu,fw-cfg-mmio.yaml
index fcf0011b8e..3faae32366 100644
--- a/dts/Bindings/firmware/qemu,fw-cfg-mmio.yaml
+++ b/dts/Bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: QEMU Firmware Configuration bindings
+title: QEMU Firmware Configuration
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/dts/Bindings/fpga/lattice,sysconfig.yaml b/dts/Bindings/fpga/lattice,sysconfig.yaml
new file mode 100644
index 0000000000..4fb05eb84e
--- /dev/null
+++ b/dts/Bindings/fpga/lattice,sysconfig.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lattice Slave SPI sysCONFIG FPGA manager
+
+maintainers:
+  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+
+description: |
+  Lattice sysCONFIG port, which is used for FPGA configuration, among others,
+  have Slave Serial Peripheral Interface. Only full reconfiguration is
+  supported.
+
+  Programming of ECP5 is done by writing uncompressed bitstream image in .bit
+  format into FPGA's SRAM configuration memory.
+
+properties:
+  compatible:
+    enum:
+      - lattice,sysconfig-ecp5
+
+  reg:
+    maxItems: 1
+
+  program-gpios:
+    description:
+      A GPIO line connected to PROGRAMN (active low) pin of the device.
+      Initiates configuration sequence.
+    maxItems: 1
+
+  init-gpios:
+    description:
+      A GPIO line connected to INITN (active low) pin of the device.
+      Indicates that the FPGA is ready to be configured.
+    maxItems: 1
+
+  done-gpios:
+    description:
+      A GPIO line connected to DONE (active high) pin of the device.
+      Indicates that the configuration sequence is complete.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: lattice,sysconfig-ecp5
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 60000000
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fpga-mgr@0 {
+            compatible = "lattice,sysconfig-ecp5";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+            init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+            done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/dts/Bindings/gpio/gpio-davinci.yaml b/dts/Bindings/gpio/gpio-davinci.yaml
index f32e09ef93..10e56cf306 100644
--- a/dts/Bindings/gpio/gpio-davinci.yaml
+++ b/dts/Bindings/gpio/gpio-davinci.yaml
@@ -35,7 +35,7 @@ properties:
   gpio-line-names:
     description: strings describing the names of each gpio line.
     minItems: 1
-    maxItems: 100
+    maxItems: 144
 
   "#gpio-cells":
     const: 2
diff --git a/dts/Bindings/gpio/gpio-latch.yaml b/dts/Bindings/gpio/gpio-latch.yaml
new file mode 100644
index 0000000000..1ed82a2ceb
--- /dev/null
+++ b/dts/Bindings/gpio/gpio-latch.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-latch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO latch controller
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  This binding describes a GPIO multiplexer based on latches connected to
+  other GPIOs, like this:
+
+  CLK0 ----------------------.        ,--------.
+  CLK1 -------------------.  `--------|>    #0 |
+                          |           |        |
+  OUT0 ----------------+--|-----------|D0    Q0|-----|<
+  OUT1 --------------+-|--|-----------|D1    Q1|-----|<
+  OUT2 ------------+-|-|--|-----------|D2    Q2|-----|<
+  OUT3 ----------+-|-|-|--|-----------|D3    Q3|-----|<
+  OUT4 --------+-|-|-|-|--|-----------|D4    Q4|-----|<
+  OUT5 ------+-|-|-|-|-|--|-----------|D5    Q5|-----|<
+  OUT6 ----+-|-|-|-|-|-|--|-----------|D6    Q6|-----|<
+  OUT7 --+-|-|-|-|-|-|-|--|-----------|D7    Q7|-----|<
+         | | | | | | | |  |           `--------'
+         | | | | | | | |  |
+         | | | | | | | |  |           ,--------.
+         | | | | | | | |  `-----------|>    #1 |
+         | | | | | | | |              |        |
+         | | | | | | | `--------------|D0    Q0|-----|<
+         | | | | | | `----------------|D1    Q1|-----|<
+         | | | | | `------------------|D2    Q2|-----|<
+         | | | | `--------------------|D3    Q3|-----|<
+         | | | `----------------------|D4    Q4|-----|<
+         | | `------------------------|D5    Q5|-----|<
+         | `--------------------------|D6    Q6|-----|<
+         `----------------------------|D7    Q7|-----|<
+                                      `--------'
+
+  The number of clk-gpios and latched-gpios is not fixed. The actual number
+  of number of latches and the number of inputs per latch is derived from
+  the number of GPIOs given in the corresponding device tree properties.
+
+properties:
+  compatible:
+    const: gpio-latch
+  "#gpio-cells":
+    const: 2
+
+  clk-gpios:
+    description: Array of GPIOs to be used to clock a latch
+
+  latched-gpios:
+    description: Array of GPIOs to be used as inputs per latch
+
+  setup-duration-ns:
+    description: Delay in nanoseconds to wait after the latch inputs have been
+      set up
+
+  clock-duration-ns:
+    description: Delay in nanoseconds to wait between clock output changes
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - clk-gpios
+  - latched-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-latch {
+        #gpio-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_di_do_leds>;
+        compatible = "gpio-latch";
+        gpio-controller;
+        setup-duration-ns = <100>;
+        clock-duration-ns = <100>;
+
+        clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
+        latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
+                       <&gpio3 23 0>, <&gpio3 24 0>,
+                       <&gpio3 25 0>, <&gpio3 26 0>,
+                       <&gpio3 27 0>, <&gpio3 28 0>;
+    };
diff --git a/dts/Bindings/gpio/gpio-pca9570.yaml b/dts/Bindings/gpio/gpio-pca9570.yaml
index 1acaa0a3d3..48bf414aa5 100644
--- a/dts/Bindings/gpio/gpio-pca9570.yaml
+++ b/dts/Bindings/gpio/gpio-pca9570.yaml
@@ -12,6 +12,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - dlg,slg7xl45106
       - nxp,pca9570
       - nxp,pca9571
 
diff --git a/dts/Bindings/gpio/gpio-tpic2810.yaml b/dts/Bindings/gpio/gpio-tpic2810.yaml
index cb8a5c376e..157969bc4c 100644
--- a/dts/Bindings/gpio/gpio-tpic2810.yaml
+++ b/dts/Bindings/gpio/gpio-tpic2810.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TPIC2810 GPIO controller bindings
+title: TPIC2810 GPIO controller
 
 maintainers:
   - Aswath Govindraju <a-govindraju@ti.com>
diff --git a/dts/Bindings/gpio/hisilicon,ascend910-gpio.yaml b/dts/Bindings/gpio/hisilicon,ascend910-gpio.yaml
new file mode 100644
index 0000000000..735d97d645
--- /dev/null
+++ b/dts/Bindings/gpio/hisilicon,ascend910-gpio.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/hisilicon,ascend910-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common GPIO controller
+
+maintainers:
+  - Jay Fang <f.fangjian@huawei.com>
+
+description:
+  The HiSilicon common GPIO controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio@840d0000 {
+      compatible = "hisilicon,ascend910-gpio";
+      reg = <0x840d0000 0x1000>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/dts/Bindings/gpio/ti,omap-gpio.yaml b/dts/Bindings/gpio/ti,omap-gpio.yaml
index 7087e4a501..bd721c8390 100644
--- a/dts/Bindings/gpio/ti,omap-gpio.yaml
+++ b/dts/Bindings/gpio/ti,omap-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OMAP GPIO controller bindings
+title: OMAP GPIO controller
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
diff --git a/dts/Bindings/gpu/brcm,bcm-v3d.yaml b/dts/Bindings/gpu/brcm,bcm-v3d.yaml
index 217c42874f..dae55b8a26 100644
--- a/dts/Bindings/gpu/brcm,bcm-v3d.yaml
+++ b/dts/Bindings/gpu/brcm,bcm-v3d.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom V3D GPU Bindings
+title: Broadcom V3D GPU
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
diff --git a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
index 3cf8629764..ed9554c837 100644
--- a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
+++ b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Device tree binding for NVIDIA Tegra NVDEC
+title: NVIDIA Tegra NVDEC
 
 description: |
   NVDEC is the hardware video decoder present on NVIDIA Tegra210
diff --git a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
index e63ae1a008..8199e5fa82 100644
--- a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
+++ b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Device tree binding for NVIDIA Tegra NVENC
+title: NVIDIA Tegra NVENC
 
 description: |
   NVENC is the hardware video encoder present on NVIDIA Tegra210
diff --git a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
index 8647404d67..895fb346ac 100644
--- a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
+++ b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvjpg.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Device tree binding for NVIDIA Tegra NVJPG
+title: NVIDIA Tegra NVJPG
 
 description: |
   NVJPG is the hardware JPEG decoder and encoder present on NVIDIA Tegra210
diff --git a/dts/Bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml b/dts/Bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
new file mode 100644
index 0000000000..4bdc19a2bc
--- /dev/null
+++ b/dts/Bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra234 NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: nvdec
+      - const: fuse
+      - const: tsec_pka
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the memory controller for determining information for the NVDEC
+      firmware secure carveout. This carveout is configured by the bootloader and
+      not accessible to CPU.
+
+  nvidia,bl-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader data section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system data section from beginning of firmware that was configured
+      by the bootloader.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,memory-controller
+  - nvidia,bl-manifest-offset
+  - nvidia,bl-code-offset
+  - nvidia,bl-data-offset
+  - nvidia,os-manifest-offset
+  - nvidia,os-code-offset
+  - nvidia,os-data-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra234-nvdec";
+            reg = <0x15480000 0x00040000>;
+            clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+                     <&bpmp TEGRA234_CLK_FUSE>,
+                     <&bpmp TEGRA234_CLK_TSEC_PKA>;
+            clock-names = "nvdec", "fuse", "tsec_pka";
+            resets = <&bpmp TEGRA234_RESET_NVDEC>;
+            reset-names = "nvdec";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+            dma-coherent;
+
+            nvidia,memory-controller = <&mc>;
+
+            /* Placeholder values, to be replaced with values from overlay */
+            nvidia,bl-manifest-offset = <0>;
+            nvidia,bl-data-offset = <0>;
+            nvidia,bl-code-offset = <0>;
+            nvidia,os-manifest-offset = <0>;
+            nvidia,os-data-offset = <0>;
+            nvidia,os-code-offset = <0>;
+    };
diff --git a/dts/Bindings/gpu/vivante,gc.yaml b/dts/Bindings/gpu/vivante,gc.yaml
index 93e7244cdc..b1b10ea70a 100644
--- a/dts/Bindings/gpu/vivante,gc.yaml
+++ b/dts/Bindings/gpu/vivante,gc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Vivante GPU Bindings
+title: Vivante GPU
 
 description: Vivante GPU core devices
 
diff --git a/dts/Bindings/hwinfo/loongson,ls2k-chipid.yaml b/dts/Bindings/hwinfo/loongson,ls2k-chipid.yaml
new file mode 100644
index 0000000000..9d0c36ec19
--- /dev/null
+++ b/dts/Bindings/hwinfo/loongson,ls2k-chipid.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/loongson,ls2k-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC ChipID
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC contains many groups of global utilities register
+  blocks, of which the ChipID group registers record SoC version,
+  feature, vendor and id information.
+
+properties:
+  compatible:
+    const: loongson,ls2k-chipid
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid: chipid@1fe00000 {
+        compatible = "loongson,ls2k-chipid";
+        reg = <0x1fe00000 0x3ffc>;
+        little-endian;
+    };
diff --git a/dts/Bindings/hwlock/st,stm32-hwspinlock.yaml b/dts/Bindings/hwlock/st,stm32-hwspinlock.yaml
index b18c616035..829d1fdf4c 100644
--- a/dts/Bindings/hwlock/st,stm32-hwspinlock.yaml
+++ b/dts/Bindings/hwlock/st,stm32-hwspinlock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/hwlock/st,stm32-hwspinlock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Hardware Spinlock bindings
+title: STMicroelectronics STM32 Hardware Spinlock
 
 maintainers:
   - Fabien Dessenne <fabien.dessenne@foss.st.com>
diff --git a/dts/Bindings/hwmon/adt7475.yaml b/dts/Bindings/hwmon/adt7475.yaml
index ea595102a8..051c976ab7 100644
--- a/dts/Bindings/hwmon/adt7475.yaml
+++ b/dts/Bindings/hwmon/adt7475.yaml
@@ -61,7 +61,7 @@ patternProperties:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
-  "adi,pin(5|10)-function":
+  "^adi,pin(5|10)-function$":
     description: |
       Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
       pin 10 on the adi,adt7476 and adi,adt7490.
@@ -70,7 +70,7 @@ patternProperties:
       - pwm2
       - smbalert#
 
-  "adi,pin(9|14)-function":
+  "^adi,pin(9|14)-function$":
     description: |
       Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or
       pin 14 on the adi,adt7476 and adi,adt7490
diff --git a/dts/Bindings/hwmon/moortec,mr75203.yaml b/dts/Bindings/hwmon/moortec,mr75203.yaml
index d0d5497492..ae4f68d4e6 100644
--- a/dts/Bindings/hwmon/moortec,mr75203.yaml
+++ b/dts/Bindings/hwmon/moortec,mr75203.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Moortec Semiconductor MR75203 PVT Controller bindings
+title: Moortec Semiconductor MR75203 PVT Controller
 
 maintainers:
   - Rahul Tanwar <rtanwar@maxlinear.com>
diff --git a/dts/Bindings/hwmon/ntc-thermistor.yaml b/dts/Bindings/hwmon/ntc-thermistor.yaml
index 3d3b139a91..6a1920712f 100644
--- a/dts/Bindings/hwmon/ntc-thermistor.yaml
+++ b/dts/Bindings/hwmon/ntc-thermistor.yaml
@@ -6,7 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NTC thermistor temperature sensors
 
 maintainers:
-  - Naveen Krishna Chatradhi <ch.naveen@samsung.com>
   - Linus Walleij <linus.walleij@linaro.org>
 
 description: |
diff --git a/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index 6e1c70e927..cf523615f5 100644
--- a/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -47,6 +47,7 @@ examples:
             compatible = "google,cros-ec-spi";
             reg = <0>;
             spi-max-frequency = <5000000>;
+            interrupts = <99 0>;
 
             i2c-tunnel {
                 compatible = "google,cros-ec-i2c-tunnel";
diff --git a/dts/Bindings/i2c/hisilicon,ascend910-i2c.yaml b/dts/Bindings/i2c/hisilicon,ascend910-i2c.yaml
new file mode 100644
index 0000000000..7d7a8de7bc
--- /dev/null
+++ b/dts/Bindings/i2c/hisilicon,ascend910-i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hisilicon,ascend910-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common I2C controller
+
+maintainers:
+  - Yicong Yang <yangyicong@hisilicon.com>
+
+description:
+  The HiSilicon common I2C controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 400000
+
+  i2c-sda-falling-time-ns:
+    default: 343
+
+  i2c-scl-falling-time-ns:
+    default: 203
+
+  i2c-sda-hold-time-ns:
+    default: 830
+
+  i2c-scl-rising-time-ns:
+    default: 365
+
+  i2c-digital-filter-width-ns:
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@38b0000 {
+      compatible = "hisilicon,ascend910-i2c";
+      reg = <0x38b0000 0x10000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      i2c-sda-falling-time-ns = <56>;
+      i2c-scl-falling-time-ns = <56>;
+      i2c-sda-hold-time-ns = <56>;
+      i2c-scl-rising-time-ns = <56>;
+      i2c-digital-filter;
+      i2c-digital-filter-width-ns = <0x0>;
+      clocks = <&alg_clk>;
+      clock-frequency = <400000>;
+    };
diff --git a/dts/Bindings/i2c/i2c-gpio.yaml b/dts/Bindings/i2c/i2c-gpio.yaml
index fd04028456..e0d76d5eb1 100644
--- a/dts/Bindings/i2c/i2c-gpio.yaml
+++ b/dts/Bindings/i2c/i2c-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for GPIO bitbanged I2C
+title: GPIO bitbanged I2C
 
 maintainers:
   - Wolfram Sang <wsa@kernel.org>
diff --git a/dts/Bindings/i2c/i2c-mt65xx.yaml b/dts/Bindings/i2c/i2c-mt65xx.yaml
index 4e730fb7be..421563bf57 100644
--- a/dts/Bindings/i2c/i2c-mt65xx.yaml
+++ b/dts/Bindings/i2c/i2c-mt65xx.yaml
@@ -23,6 +23,7 @@ properties:
       - const: mediatek,mt6577-i2c
       - const: mediatek,mt6589-i2c
       - const: mediatek,mt7622-i2c
+      - const: mediatek,mt7986-i2c
       - const: mediatek,mt8168-i2c
       - const: mediatek,mt8173-i2c
       - const: mediatek,mt8183-i2c
diff --git a/dts/Bindings/i2c/i2c-pxa.yaml b/dts/Bindings/i2c/i2c-pxa.yaml
index 015885dd02..31386a8d76 100644
--- a/dts/Bindings/i2c/i2c-pxa.yaml
+++ b/dts/Bindings/i2c/i2c-pxa.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP I2C controller bindings
+title: Marvell MMP I2C controller
 
 maintainers:
   - Rob Herring <robh+dt@kernel.org>
diff --git a/dts/Bindings/i2c/ingenic,i2c.yaml b/dts/Bindings/i2c/ingenic,i2c.yaml
index af6d64a6da..b61fdc9548 100644
--- a/dts/Bindings/i2c/ingenic,i2c.yaml
+++ b/dts/Bindings/i2c/ingenic,i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs I2C controller devicetree bindings
+title: Ingenic SoCs I2C controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
index 93c164aa00..984fc1ed3e 100644
--- a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -19,6 +19,7 @@ properties:
       - const: allwinner,sun6i-a31-i2c
       - items:
           - enum:
+              - allwinner,suniv-f1c100s-i2c
               - allwinner,sun8i-a23-i2c
               - allwinner,sun8i-a83t-i2c
               - allwinner,sun8i-v536-i2c
diff --git a/dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml b/dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml
index 0e7ed00562..f5f7dc8f32 100644
--- a/dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/dts/Bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -10,18 +10,19 @@ maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 properties:
   compatible:
-    const: qcom,geni-i2c
+    enum:
+      - qcom,geni-i2c
+      - qcom,geni-i2c-master-hub
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    const: se
+    minItems: 1
+    maxItems: 2
 
   clock-frequency:
     default: 100000
@@ -35,13 +36,12 @@ properties:
       - const: rx
 
   interconnects:
+    minItems: 2
     maxItems: 3
 
   interconnect-names:
-    items:
-      - const: qup-core
-      - const: qup-config
-      - const: qup-memory
+    minItems: 2
+    maxItems: 3
 
   interrupts:
     maxItems: 1
@@ -71,6 +71,50 @@ required:
   - clock-names
   - reg
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-i2c-master-hub
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: se
+            - const: core
+
+        dmas: false
+        dma-names: false
+
+        interconnects:
+          maxItems: 2
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: se
+
+        interconnects:
+          minItems: 3
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+            - const: qup-memory
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/Bindings/i2c/renesas,riic.yaml b/dts/Bindings/i2c/renesas,riic.yaml
index d3c0d5c427..2291a7cd61 100644
--- a/dts/Bindings/i2c/renesas,riic.yaml
+++ b/dts/Bindings/i2c/renesas,riic.yaml
@@ -19,7 +19,7 @@ properties:
       - enum:
           - renesas,riic-r7s72100   # RZ/A1H
           - renesas,riic-r7s9210    # RZ/A2M
-          - renesas,riic-r9a07g043  # RZ/G2UL
+          - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
           - renesas,riic-r9a07g044  # RZ/G2{L,LC}
           - renesas,riic-r9a07g054  # RZ/V2L
       - const: renesas,riic-rz      # RZ/A or RZ/G2L
diff --git a/dts/Bindings/i2c/st,nomadik-i2c.yaml b/dts/Bindings/i2c/st,nomadik-i2c.yaml
index 42c5974ec7..16024415a4 100644
--- a/dts/Bindings/i2c/st,nomadik-i2c.yaml
+++ b/dts/Bindings/i2c/st,nomadik-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST Microelectronics Nomadik I2C Bindings
+title: ST Microelectronics Nomadik I2C
 
 description: The Nomadik I2C host controller began its life in the ST
   Microelectronics STn8800 SoC, and was then inherited into STn8810 and
diff --git a/dts/Bindings/i2c/ti,omap4-i2c.yaml b/dts/Bindings/i2c/ti,omap4-i2c.yaml
index db0843be91..781108ae1c 100644
--- a/dts/Bindings/i2c/ti,omap4-i2c.yaml
+++ b/dts/Bindings/i2c/ti,omap4-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for I2C controllers on TI's OMAP and K3 SoCs
+title: I2C controllers on TI's OMAP and K3 SoCs
 
 maintainers:
   - Vignesh Raghavendra <vigneshr@ti.com>
diff --git a/dts/Bindings/i3c/i3c.yaml b/dts/Bindings/i3c/i3c.yaml
index 1f82fc9237..fdb4212149 100644
--- a/dts/Bindings/i3c/i3c.yaml
+++ b/dts/Bindings/i3c/i3c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i3c/i3c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: I3C bus binding
+title: I3C bus
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
diff --git a/dts/Bindings/iio/accel/adi,adxl355.yaml b/dts/Bindings/iio/accel/adi,adxl355.yaml
index 14b487088a..6b03c4efbb 100644
--- a/dts/Bindings/iio/accel/adi,adxl355.yaml
+++ b/dts/Bindings/iio/accel/adi,adxl355.yaml
@@ -4,20 +4,22 @@
 $id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
 
 maintainers:
   - Puranjay Mohan <puranjay12@gmail.com>
 
 description: |
-  Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
-  both I2C & SPI interfaces
+  Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
+  support both I2C & SPI interfaces
     https://www.analog.com/en/products/adxl355.html
+    https://www.analog.com/en/products/adxl359.html
 
 properties:
   compatible:
     enum:
       - adi,adxl355
+      - adi,adxl359
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/iio/accel/kionix,kx022a.yaml b/dts/Bindings/iio/accel/kionix,kx022a.yaml
new file mode 100644
index 0000000000..986df1a6ff
--- /dev/null
+++ b/dts/Bindings/iio/accel/kionix,kx022a.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM/Kionix KX022A Accelerometer
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
+  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
+  KX022A can be accessed either via I2C or SPI.
+
+properties:
+  compatible:
+    const: kionix,kx022a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+  vdd-supply: true
+  io-vdd-supply: true
+
+  mount-matrix:
+    description: |
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@1f {
+            compatible = "kionix,kx022a";
+            reg = <0x1f>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "INT1";
+
+            io-vdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git a/dts/Bindings/iio/adc/adc.yaml b/dts/Bindings/iio/adc/adc.yaml
index db348fcbb5..2616017297 100644
--- a/dts/Bindings/iio/adc/adc.yaml
+++ b/dts/Bindings/iio/adc/adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic IIO bindings for ADC channels
+title: IIO Common Properties for ADC Channels
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/dts/Bindings/iio/adc/adi,ad4130.yaml b/dts/Bindings/iio/adc/adi,ad4130.yaml
new file mode 100644
index 0000000000..d00690a8d3
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad4130.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4130 ADC device driver
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4130
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    description: |
+      Specify which interrupt pin should be configured as Data Ready / FIFO
+      interrupt.
+      Default if not supplied is int.
+    enum:
+      - int
+      - clk
+      - p2
+      - dout
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  refin1-supply:
+    description: refin1 supply. Can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply. Can be used as reference for conversion.
+
+  avdd-supply:
+    description: AVDD voltage supply. Can be used as reference for conversion.
+
+  iovdd-supply:
+    description: IOVDD voltage supply. Used for the chip interface.
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  adi,ext-clk-freq-hz:
+    description: Specify the frequency of the external clock.
+    enum: [76800, 153600]
+    default: 76800
+
+  adi,bipolar:
+    description: Specify if the device should be used in bipolar mode.
+    type: boolean
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9a-f])$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          Besides the analog inputs available, internal inputs can be used.
+          16: Internal temperature sensor.
+          17: AVSS
+          18: Internal reference
+          19: DGND
+          20: (AVDD − AVSS)/6+
+          21: (AVDD − AVSS)/6-
+          22: (IOVDD − DGND)/6+
+          23: (IOVDD − DGND)/6-
+          24: (ALDO − AVSS)/6+
+          25: (ALDO − AVSS)/6-
+          26: (DLDO − DGND)/6+
+          27: (DLDO − DGND)/6-
+          28: V_MV_P
+          29: V_MV_M
+        items:
+          minimum: 0
+          maximum: 29
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−)
+          1: REFIN2(+)/REFIN2(−)
+          2: REFOUT/AVSS (Internal reference)
+          3: AVDD/AVSS
+          If not specified, REFIN1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+      adi,excitation-pin-0:
+        description: |
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-pin-1:
+        description: |
+          Analog input to apply excitation current to while this channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-current-0-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,excitation-current-1-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,burnout-current-nanoamp:
+        description: |
+          Burnout current in nanoamps to be applied for this channel.
+        enum: [0, 500, 2000, 4000]
+        default: 0
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad4130";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi-max-frequency = <5000000>;
+        interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpio>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,reference-select = <2>;
+
+          /* AIN8, AIN9 */
+          diff-channels = <8 9>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,reference-select = <2>;
+
+          /* AIN10, AIN11 */
+          diff-channels = <10 11>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,reference-select = <2>;
+
+          /* Temperature Sensor, DGND */
+          diff-channels = <16 19>;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,reference-select = <2>;
+
+          /* Internal reference, DGND */
+          diff-channels = <18 19>;
+        };
+
+        channel@4 {
+          reg = <4>;
+
+          adi,reference-select = <2>;
+
+          /* DGND, DGND */
+          diff-channels = <19 19>;
+        };
+      };
+    };
diff --git a/dts/Bindings/iio/adc/adi,ad7923.yaml b/dts/Bindings/iio/adc/adi,ad7923.yaml
index 07f9d1c09c..85148338c5 100644
--- a/dts/Bindings/iio/adc/adi,ad7923.yaml
+++ b/dts/Bindings/iio/adc/adi,ad7923.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
-   AD7918, AD7928 8 Channels ADCs.
+   AD7918, AD7927, AD7928 8 Channels ADCs.
 
   Specifications about the part can be found at:
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
@@ -20,14 +20,22 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - adi,ad7904
-      - adi,ad7914
-      - adi,ad7923
-      - adi,ad7924
-      - adi,ad7908
-      - adi,ad7918
-      - adi,ad7928
+    oneOf:
+      - enum:
+          - adi,ad7904
+          - adi,ad7908
+          - adi,ad7914
+          - adi,ad7918
+          - adi,ad7923
+          - adi,ad7928
+      - const: adi,ad7924
+        deprecated: true
+      - items:
+          - const: adi,ad7924
+          - const: adi,ad7923
+      - items:
+          - const: adi,ad7927
+          - const: adi,ad7928
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/iio/adc/adi,max11410.yaml b/dts/Bindings/iio/adc/adi,max11410.yaml
new file mode 100644
index 0000000000..53f9feff13
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,max11410.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX11410 ADC device driver
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
+  found here:
+    https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max11410
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Name of the gpio pin of max11410 used for IRQ
+    minItems: 1
+    items:
+      - enum: [gpio0, gpio1]
+      - const: gpio1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avdd-supply:
+    description: Optional avdd supply. Used as reference when no explicit reference supplied.
+
+  vref0p-supply:
+    description: vref0p supply can be used as reference for conversion.
+
+  vref1p-supply:
+    description: vref1p supply can be used as reference for conversion.
+
+  vref2p-supply:
+    description: vref2p supply can be used as reference for conversion.
+
+  vref0n-supply:
+    description: vref0n supply can be used as reference for conversion.
+
+  vref1n-supply:
+    description: vref1n supply can be used as reference for conversion.
+
+  vref2n-supply:
+    description: vref2n supply can be used as reference for conversion.
+
+  spi-max-frequency:
+    maximum: 8000000
+
+patternProperties:
+  "^channel(@[0-9])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended mode.
+        minimum: 0
+        maximum: 9
+
+      adi,reference:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: VREF0P/VREF0N
+          1: VREF1P/VREF1N
+          2: VREF2P/VREF2N
+          3: AVDD/AGND
+          4: VREF0P/AGND
+          5: VREF1P/AGND
+          6: VREF2P/AGND
+          If this field is left empty, AVDD/AGND is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6]
+        default: 3
+
+      adi,input-mode:
+        description: |
+          Select signal path of input channels. Valid values are:
+          0: Buffered, low-power, unity-gain path (default)
+          1: Bypass path
+          2: PGA path
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      diff-channels: true
+
+      bipolar: true
+
+      settling-time-us: true
+
+      adi,buffered-vrefp:
+        description: Enable buffered mode for positive reference.
+        type: boolean
+
+      adi,buffered-vrefn:
+        description: Enable buffered mode for negative reference.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "adi,max11410";
+            spi-max-frequency = <8000000>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gpio1";
+
+            avdd-supply = <&adc_avdd>;
+
+            vref1p-supply = <&adc_vref1p>;
+            vref1n-supply = <&adc_vref1n>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <2 3>;
+                adi,reference = <1>;
+                bipolar;
+                settling-time-us = <100000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                diff-channels = <7 9>;
+                adi,reference = <5>;
+                adi,input-mode = <2>;
+                settling-time-us = <50000>;
+            };
+        };
+    };
diff --git a/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
index 15c514b835..a73a355fc6 100644
--- a/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
+++ b/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A33 Thermal Sensor Device Tree Bindings
+title: Allwinner A33 Thermal Sensor
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/dts/Bindings/iio/adc/ingenic,adc.yaml b/dts/Bindings/iio/adc/ingenic,adc.yaml
index 698beb896f..517e8b1fcb 100644
--- a/dts/Bindings/iio/adc/ingenic,adc.yaml
+++ b/dts/Bindings/iio/adc/ingenic,adc.yaml
@@ -5,7 +5,7 @@
 $id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Ingenic JZ47xx ADC controller IIO bindings
+title: Ingenic JZ47xx ADC controller IIO
 
 maintainers:
   - Artur Rojek <contact@artur-rojek.eu>
diff --git a/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml b/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml
index a6cb857a23..9ceb6f18c8 100644
--- a/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml
+++ b/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Motorola CPCAP PMIC ADC binding
+title: Motorola CPCAP PMIC ADC
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
diff --git a/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml b/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml
index 9c59a20a60..63369ba388 100644
--- a/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml
+++ b/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/nxp,imx8qxp-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP IMX8QXP ADC bindings
+title: NXP IMX8QXP ADC
 
 maintainers:
   - Cai Huoqing <caihuoqing@baidu.com>
diff --git a/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml b/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml
index 43abb300fa..70b38038a0 100644
--- a/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml
+++ b/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC1850 ADC bindings
+title: NXP LPC1850 ADC
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml b/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml
index 2a94db6888..fa855baa36 100644
--- a/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -18,7 +18,10 @@ description: |
 
 properties:
   compatible:
-    const: qcom,spmi-iadc
+    items:
+      - enum:
+          - qcom,pm8941-iadc
+      - const: qcom,spmi-iadc
 
   reg:
     description: IADC base address and length in the SPMI PMIC register map
@@ -50,7 +53,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         pmic_iadc: adc@3600 {
-            compatible = "qcom,spmi-iadc";
+            compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
             reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml
index 8bac0c4120..bd6e0d6f6e 100644
--- a/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -22,13 +22,11 @@ properties:
       - items:
           - const: qcom,pms405-adc
           - const: qcom,spmi-adc-rev2
-
-      - items:
-          - enum:
-              - qcom,spmi-vadc
-              - qcom,spmi-adc5
-              - qcom,spmi-adc-rev2
-              - qcom,spmi-adc7
+      - enum:
+          - qcom,spmi-vadc
+          - qcom,spmi-adc5
+          - qcom,spmi-adc-rev2
+          - qcom,spmi-adc7
 
   reg:
     description: VADC base address in the SPMI PMIC register map
@@ -238,42 +236,72 @@ additionalProperties: false
 
 examples:
   - |
-    spmi_bus {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      /* VADC node */
-      pmic_vadc: adc@3100 {
-        compatible = "qcom,spmi-vadc";
-        reg = <0x3100>;
-        interrupts = <0x0 0x31 0x0 0x1>;
+    spmi {
         #address-cells = <1>;
         #size-cells = <0>;
-        #io-channel-cells = <1>;
-
-        /* Channel node */
-        adc-chan@39 {
-          reg = <0x39>;
-          qcom,decimation = <512>;
-          qcom,ratiometric;
-          qcom,hw-settle-time = <200>;
-          qcom,avg-samples = <1>;
-          qcom,pre-scaling = <1 3>;
-        };
-
-        adc-chan@9 {
-          reg = <0x9>;
-        };
-
-        adc-chan@a {
-          reg = <0xa>;
+        /* VADC node */
+        pmic_vadc: adc@3100 {
+            compatible = "qcom,spmi-vadc";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Channel node */
+            adc-chan@39 {
+                reg = <0x39>;
+                qcom,decimation = <512>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                qcom,avg-samples = <1>;
+                qcom,pre-scaling = <1 3>;
+            };
+
+            adc-chan@9 {
+                reg = <0x9>;
+            };
+
+            adc-chan@a {
+                reg = <0xa>;
+            };
+
+            adc-chan@e {
+                reg = <0xe>;
+            };
+
+            adc-chan@f {
+                reg = <0xf>;
+            };
         };
+    };
 
-        adc-chan@e {
-          reg = <0xe>;
-        };
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
 
-        adc-chan@f {
-          reg = <0xf>;
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            xo-therm@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+
+            conn-therm@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
         };
-      };
     };
diff --git a/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml b/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml
index 61c6157cf5..8b743742a5 100644
--- a/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml
+++ b/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml
@@ -19,7 +19,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-adc   # RZ/G2UL
+          - renesas,r9a07g043-adc   # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-adc   # RZ/G2L
           - renesas,r9a07g054-adc   # RZ/V2L
       - const: renesas,rzg2l-adc
diff --git a/dts/Bindings/iio/adc/rockchip-saradc.yaml b/dts/Bindings/iio/adc/rockchip-saradc.yaml
index e512a14e41..da50b529c1 100644
--- a/dts/Bindings/iio/adc/rockchip-saradc.yaml
+++ b/dts/Bindings/iio/adc/rockchip-saradc.yaml
@@ -22,6 +22,7 @@ properties:
               - rockchip,rk3328-saradc
               - rockchip,rk3568-saradc
               - rockchip,rv1108-saradc
+              - rockchip,rv1126-saradc
           - const: rockchip,rk3399-saradc
 
   reg:
diff --git a/dts/Bindings/iio/adc/sigma-delta-modulator.yaml b/dts/Bindings/iio/adc/sigma-delta-modulator.yaml
index 2287697f1f..cab0d425ea 100644
--- a/dts/Bindings/iio/adc/sigma-delta-modulator.yaml
+++ b/dts/Bindings/iio/adc/sigma-delta-modulator.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device-Tree bindings for sigma delta modulator
+title: Sigma delta modulator
 
 maintainers:
   - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
diff --git a/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml b/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml
index 44aa28b591..8181cf9a8e 100644
--- a/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml
+++ b/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC27XX series PMICs ADC binding
+title: Spreadtrum SC27XX series PMICs ADC
 
 maintainers:
   - Baolin Wang <baolin.wang7@gmail.com>
diff --git a/dts/Bindings/iio/adc/st,stm32-adc.yaml b/dts/Bindings/iio/adc/st,stm32-adc.yaml
index fa8da42cb1..1c340c95df 100644
--- a/dts/Bindings/iio/adc/st,stm32-adc.yaml
+++ b/dts/Bindings/iio/adc/st,stm32-adc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 ADC bindings
+title: STMicroelectronics STM32 ADC
 
 description: |
   STM32 ADC is a successive approximation analog-to-digital converter.
@@ -27,6 +27,7 @@ properties:
       - st,stm32f4-adc-core
       - st,stm32h7-adc-core
       - st,stm32mp1-adc-core
+      - st,stm32mp13-adc-core
 
   reg:
     maxItems: 1
@@ -37,6 +38,7 @@ properties:
         - stm32f4 and stm32h7 share a common ADC interrupt line.
         - stm32mp1 has two separate interrupt lines, one for each ADC within
           ADC block.
+        - stm32mp13 has an interrupt line per ADC block.
     minItems: 1
     maxItems: 2
 
@@ -180,6 +182,33 @@ allOf:
           maximum: 36000000
           default: 36000000
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp13-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: ADC interrupt line
+
+        st,max-clk-rate-hz:
+          minimum: 150000
+          maximum: 75000000
+          default: 75000000
+
 additionalProperties: false
 
 required:
@@ -208,6 +237,7 @@ patternProperties:
           - st,stm32f4-adc
           - st,stm32h7-adc
           - st,stm32mp1-adc
+          - st,stm32mp13-adc
 
       reg:
         description: |
@@ -229,7 +259,7 @@ patternProperties:
       interrupts:
         description: |
           IRQ Line for the ADC instance. Valid values are:
-            - 0 for adc@0
+            - 0 for adc@0 (single adc for stm32mp13)
             - 1 for adc@100
             - 2 for adc@200 (stm32f4 only)
         maxItems: 1
@@ -250,13 +280,14 @@ patternProperties:
       assigned-resolution-bits:
         description: |
           Resolution (bits) to use for conversions:
-            - can be 6, 8, 10 or 12 on stm32f4
+            - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13
             - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
 
       st,adc-channels:
         description: |
           List of single-ended channels muxed for this ADC. It can have up to:
             - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
+            - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13.
             - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
               stm32mp1.
         $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -322,7 +353,7 @@ patternProperties:
           label:
             description: |
               Unique name to identify which channel this is.
-              Reserved label names "vddcore", "vrefint" and "vbat"
+              Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
               are used to identify internal channels with matching names.
 
           diff-channels:
@@ -419,6 +450,37 @@ patternProperties:
               items:
                 minimum: 40
 
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32mp13-adc
+
+        then:
+          properties:
+            reg:
+              const: 0x0
+
+            interrupts:
+              const: 0
+
+            assigned-resolution-bits:
+              enum: [6, 8, 10, 12]
+              default: 12
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 0
+                maximum: 18
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 40
     additionalProperties: false
 
     required:
diff --git a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml
index 57a3135608..720c16a108 100644
--- a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml
+++ b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/ti,palmas-gpadc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Palmas general purpose ADC IP block devicetree bindings
+title: Palmas general purpose ADC IP block
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
diff --git a/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml b/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml
index d6d3d85901..d40689f233 100644
--- a/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/x-powers,axp209-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: X-Powers AXP ADC bindings
+title: X-Powers AXP ADC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/dts/Bindings/iio/addac/adi,ad74115.yaml b/dts/Bindings/iio/addac/adi,ad74115.yaml
new file mode 100644
index 0000000000..72d2e910f2
--- /dev/null
+++ b/dts/Bindings/iio/addac/adi,ad74115.yaml
@@ -0,0 +1,373 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74115H device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74115H is a single-channel software configurable input/output
+  device for industrial control applications. It contains functionality for
+  analog output, analog input, digital output, digital input, resistance
+  temperature detector, and thermocouple measurements integrated into a single
+  chip solution with an SPI interface. The device features a 16-bit ADC and a
+  14-bit DAC.
+
+    https://www.analog.com/en/products/ad74115h.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74115h
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  spi-cpol: true
+
+  reset-gpios: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  avdd-supply: true
+  avcc-supply: true
+  dvcc-supply: true
+  dovdd-supply: true
+  refin-supply: true
+
+  adi,ch-func:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Channel function.
+      0 - High impedance
+      1 - Voltage output
+      2 - Current output
+      3 - Voltage input
+      4 - Current input, externally-powered
+      5 - Current input, loop-powered
+      6 - Resistance input
+      7 - RTD measure
+      8 - Digital input logic
+      9 - Digital input, loop-powered
+      10 - Current output with HART
+      11 - Current input, externally-powered, with HART
+      12 - Current input, loop-powered, with HART
+    minimum: 0
+    maximum: 12
+    default: 0
+
+  adi,conv2-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Input node for ADC conversion 2.
+      0 - SENSE_EXT1 to AGND_SENSE
+      1 - SENSE_EXT2 to AGND_SENSE
+      2 - SENSE_EXT2 to SENSE_EXT1
+      3 - AGND to AGND
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  adi,conv2-range-microvolt:
+    description: Conversion range for ADC conversion 2.
+    oneOf:
+      - items:
+          - enum: [-2500000, 0]
+          - const: 2500000
+      - items:
+          - enum: [-12000000, 0]
+          - const: 12000000
+      - items:
+          - const: -2500000
+          - const: 0
+      - items:
+          - const: -104000
+          - const: 104000
+      - items:
+          - const: 0
+          - const: 625000
+
+  adi,sense-agnd-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the AGND sense pin.
+
+  adi,lf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the low-side filtered
+      sense pin.
+
+  adi,hf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the high-side filtered
+      sense pin.
+
+  adi,ext2-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT2 pin.
+
+  adi,ext1-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT1 pin.
+
+  adi,comparator-invert:
+    type: boolean
+    description: Whether to invert the comparator output.
+
+  adi,digital-input-sink-range-high:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      When not present, the digital input range is from 0 to 3700uA in steps
+      of 120uA, with a ~2k series resistance.
+      When present, the digital input range is from 0 to 7400uA in steps
+      of 240uA, with a ~1k series resistance.
+
+  adi,digital-input-sink-microamp:
+    description: Sink current in digital input mode.
+    minimum: 0
+    maximum: 3700
+    default: 0
+
+  adi,digital-input-debounce-mode-counter-reset:
+    type: boolean
+    description: |
+      When not present, a counter increments when the signal is asserted
+      and decrements when the signal is de-asserted.
+      When present, a counter increments while the signal is asserted and
+      resets when the signal de-asserts
+
+  adi,digital-input-unbuffered:
+    type: boolean
+    description: Whether to buffer digital input signals.
+
+  adi,digital-input-short-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input short circuits.
+
+  adi,digital-input-open-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input open circuits.
+
+  adi,digital-input-threshold-mode-fixed:
+    type: boolean
+    description: |
+      When not present, the digital input threshold range is -0.96 * AVDD
+      to AVDD.
+      When present, the threshold range is fixed from -19V to 30V.
+
+  adi,dac-bipolar:
+    type: boolean
+    description: |
+      When not present, the DAC operates in the 0V to 12V range.
+      When present, the DAC operates in the -12V to 12V range.
+
+  adi,charge-pump:
+    type: boolean
+    description: Whether to enable the internal charge pump.
+
+  adi,dac-hart-slew:
+    type: boolean
+    description: Whether to use a HART-compatible slew rate.
+
+  adi,dac-current-limit-low:
+    type: boolean
+    description: |
+      When not present, the DAC short-circuit current limit is 32mA in
+      either source or sink for VOUT and 4mA sink for IOUT.
+      When present, the limit is 16mA in either source or sink for VOUT,
+      1mA sink for IOUT.
+
+  adi,4-wire-rtd:
+    type: boolean
+    description: |
+      When not present, the ADC should be used for measuring 3-wire RTDs.
+      When present, the ADC should be used for measuring 4-wire RTDs.
+
+  adi,3-wire-rtd-excitation-swap:
+    type: boolean
+    description: Whether to swap the excitation for 3-wire RTD.
+
+  adi,rtd-excitation-current-microamp:
+    description: Excitation current to apply to RTD.
+    enum: [250, 500, 750, 1000]
+    default: 250
+
+  adi,ext1-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT1.
+
+  adi,ext1-burnout-current-nanoamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Burnout current in nanoamps to be applied to EXT1.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext1-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT1 is sinking.
+      When present, the burnout current polarity for EXT1 is sourcing.
+
+  adi,ext2-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT2.
+
+  adi,ext2-burnout-current-nanoamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burnout current in nanoamps to be applied to EXT2.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext2-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT2 is sinking.
+      When present, the burnout current polarity for EXT2 is sourcing.
+
+  adi,viout-burnout:
+    type: boolean
+    description: Whether to enable burnout current for VIOUT.
+
+  adi,viout-burnout-current-nanoamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burnout current in nanoamps to be applied to VIOUT.
+    enum: [0, 1000, 10000]
+    default: 0
+
+  adi,viout-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for VIOUT is sinking.
+      When present, the burnout current polarity for VIOUT is sourcing.
+
+  adi,gpio0-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Comparator output
+      3 - Control HART CD
+      4 - Monitor HART CD
+      5 - Monitor HART EOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio1-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive external digital output FET
+      3 - Control HART RXD
+      4 - Monitor HART RXD
+      5 - Monitor HART SOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio2-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive internal digital output FET
+      3 - Control HART TXD
+      4 - Monitor HART TXD
+      5 - Monitor HART TX complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio3-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - High impedance
+      3 - Control HART RTS
+      4 - Monitor HART RTS
+      5 - Monitor HART CD complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpol
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - adi,digital-input-sink-range-high
+    then:
+      properties:
+        adi,digital-input-sink-microamp:
+          maximum: 7400
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      addac@0 {
+        compatible = "adi,ad74115h";
+        reg = <0>;
+
+        spi-max-frequency = <12000000>;
+        spi-cpol;
+
+        reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "adc_rdy";
+
+        avdd-supply = <&ad74115_avdd>;
+
+        adi,ch-func = <1>;
+        adi,conv2-mux = <2>;
+        adi,conv2-range-microvolt = <(-12000000) 12000000>;
+
+        adi,gpio0-mode = <1>;
+        adi,gpio1-mode = <1>;
+        adi,gpio2-mode = <1>;
+        adi,gpio3-mode = <1>;
+
+        adi,dac-bipolar;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/addac/adi,ad74413r.yaml b/dts/Bindings/iio/addac/adi,ad74413r.yaml
index 03bb90a7f4..9eb3ecc8bb 100644
--- a/dts/Bindings/iio/addac/adi,ad74413r.yaml
+++ b/dts/Bindings/iio/addac/adi,ad74413r.yaml
@@ -51,6 +51,9 @@ properties:
       Shunt (sense) resistor value in micro-Ohms.
     default: 100000000
 
+  reset-gpios:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -58,8 +61,6 @@ required:
   - spi-cpol
   - refin-supply
 
-additionalProperties: false
-
 patternProperties:
   "^channel@[0-3]$":
     type: object
@@ -103,6 +104,11 @@ patternProperties:
     required:
       - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -113,10 +119,7 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-      status = "okay";
-
-      ad74413r@0 {
+      addac@0 {
         compatible = "adi,ad74413r";
         reg = <0>;
         spi-max-frequency = <1000000>;
@@ -129,6 +132,7 @@ examples:
         interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 
         refin-supply = <&ad74413r_refin>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 
         channel@0 {
           reg = <0>;
diff --git a/dts/Bindings/iio/dac/adi,ad5758.yaml b/dts/Bindings/iio/dac/adi,ad5758.yaml
index e49e755617..4e508bfcc9 100644
--- a/dts/Bindings/iio/dac/adi,ad5758.yaml
+++ b/dts/Bindings/iio/dac/adi,ad5758.yaml
@@ -102,8 +102,7 @@ allOf:
   - if:
       properties:
         adi,dc-dc-mode:
-          contains:
-            enum: [1, 3]
+          enum: [1, 3]
     then:
       properties:
         adi,range-microvolt: false
diff --git a/dts/Bindings/iio/dac/adi,ad5766.yaml b/dts/Bindings/iio/dac/adi,ad5766.yaml
index 29bd16dab5..3c8784a54d 100644
--- a/dts/Bindings/iio/dac/adi,ad5766.yaml
+++ b/dts/Bindings/iio/dac/adi,ad5766.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD5766 DAC device driver
 
 maintainers:
-  - Cristian Pop <cristian.pop@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be
diff --git a/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml b/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml
index 595f481c54..9c8afe3f1b 100644
--- a/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml
+++ b/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/dac/nxp,lpc1850-dac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC1850 DAC bindings
+title: NXP LPC1850 DAC
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/dts/Bindings/iio/dac/st,stm32-dac.yaml b/dts/Bindings/iio/dac/st,stm32-dac.yaml
index 6adeda4087..0f1bf11101 100644
--- a/dts/Bindings/iio/dac/st,stm32-dac.yaml
+++ b/dts/Bindings/iio/dac/st,stm32-dac.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 DAC bindings
+title: STMicroelectronics STM32 DAC
 
 description: |
   The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
diff --git a/dts/Bindings/iio/frequency/adi,adf4350.yaml b/dts/Bindings/iio/frequency/adi,adf4350.yaml
index d7f20b8518..43cbf27114 100644
--- a/dts/Bindings/iio/frequency/adi,adf4350.yaml
+++ b/dts/Bindings/iio/frequency/adi,adf4350.yaml
@@ -160,13 +160,16 @@ properties:
       2: +2dBm
       3: +5dBm
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - clocks
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/dts/Bindings/iio/frequency/adi,adf4377.yaml b/dts/Bindings/iio/frequency/adi,adf4377.yaml
new file mode 100644
index 0000000000..aa6a3193b4
--- /dev/null
+++ b/dts/Bindings/iio/frequency/adi,adf4377.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adf4377.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADF4377 Microwave Wideband Synthesizer with Integrated VCO
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+
+description: |
+   The ADF4377 is a high performance, ultralow jitter, dual output integer-N
+   phased locked loop (PLL) with integrated voltage controlled oscillator (VCO)
+   ideally suited for data converter and mixed signal front end (MxFE) clock
+   applications.
+
+   https://www.analog.com/en/products/adf4377.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4377
+      - adi,adf4378
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      External clock that provides reference input frequency.
+    items:
+      - const: ref_in
+
+  chip-enable-gpios:
+    description:
+      GPIO that controls the Chip Enable Pin.
+    maxItems: 1
+
+  clk1-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 1 Output Buffer Pin.
+    maxItems: 1
+
+  clk2-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 2 Output Buffer Pin.
+    maxItems: 1
+
+  adi,muxout-select:
+    description:
+      On chip multiplexer output selection.
+      high_z - MUXOUT Pin set to high-Z.
+      lock_detect - MUXOUT Pin set to lock detector output.
+      muxout_low - MUXOUT Pin set to low.
+      f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2.
+      f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2.
+      muxout_high - MUXOUT Pin set to high.
+    enum: [high_z, lock_detect, muxout_low, f_div_rclk_2, f_div_nclk_2, muxout_high]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        frequency@0 {
+            compatible = "adi,adf4377";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            clocks = <&adf4377_ref_in>;
+            clock-names = "ref_in";
+        };
+    };
+...
diff --git a/dts/Bindings/iio/frequency/adi,admv1013.yaml b/dts/Bindings/iio/frequency/adi,admv1013.yaml
index 23f1f3b55a..fc813bcb65 100644
--- a/dts/Bindings/iio/frequency/adi,admv1013.yaml
+++ b/dts/Bindings/iio/frequency/adi,admv1013.yaml
@@ -70,7 +70,10 @@ required:
   - clock-names
   - vcm-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/frequency/adi,admv1014.yaml b/dts/Bindings/iio/frequency/adi,admv1014.yaml
index 2716c1e8fe..ab86daa2c5 100644
--- a/dts/Bindings/iio/frequency/adi,admv1014.yaml
+++ b/dts/Bindings/iio/frequency/adi,admv1014.yaml
@@ -104,7 +104,10 @@ required:
   - clock-names
   - vcm-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/frequency/adi,admv4420.yaml b/dts/Bindings/iio/frequency/adi,admv4420.yaml
index da7fe85ec9..64f2352aac 100644
--- a/dts/Bindings/iio/frequency/adi,admv4420.yaml
+++ b/dts/Bindings/iio/frequency/adi,admv4420.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADMV4420 K Band Downconverter
 
 maintainers:
-  - Cristian Pop <cristian.pop@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description:
   The ADMV4420 is a highly integrated, double balanced, active
@@ -37,7 +37,11 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/frequency/adi,adrf6780.yaml b/dts/Bindings/iio/frequency/adi,adrf6780.yaml
index 3a8ea93f4e..f11391ab4b 100644
--- a/dts/Bindings/iio/frequency/adi,adrf6780.yaml
+++ b/dts/Bindings/iio/frequency/adi,adrf6780.yaml
@@ -113,7 +113,10 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml b/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml
index 662ec59ca0..0ae2464b9b 100644
--- a/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml
+++ b/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -38,7 +38,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml b/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml
index 3f57a1b813..2c900e9ddd 100644
--- a/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -56,7 +56,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/imu/adi,adis16475.yaml b/dts/Bindings/iio/imu/adi,adis16475.yaml
index a757421017..5dbfae80bb 100644
--- a/dts/Bindings/iio/imu/adi,adis16475.yaml
+++ b/dts/Bindings/iio/imu/adi,adis16475.yaml
@@ -79,6 +79,7 @@ required:
   - spi-cpol
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -107,7 +108,7 @@ allOf:
       dependencies:
         adi,sync-mode: [ clocks ]
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/imu/invensense,icm42600.yaml b/dts/Bindings/iio/imu/invensense,icm42600.yaml
index 488349755c..13c9abdd31 100644
--- a/dts/Bindings/iio/imu/invensense,icm42600.yaml
+++ b/dts/Bindings/iio/imu/invensense,icm42600.yaml
@@ -31,6 +31,7 @@ properties:
       - invensense,icm42602
       - invensense,icm42605
       - invensense,icm42622
+      - invensense,icm42631
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/iio/imu/st,lsm6dsx.yaml b/dts/Bindings/iio/imu/st,lsm6dsx.yaml
index fe1e02e5d7..68b481c633 100644
--- a/dts/Bindings/iio/imu/st,lsm6dsx.yaml
+++ b/dts/Bindings/iio/imu/st,lsm6dsx.yaml
@@ -32,12 +32,20 @@ properties:
           - st,lsm6dsrx
           - st,lsm6dst
           - st,lsm6dsop
+          - st,lsm6dsv
+          - st,lsm6dso16is
       - items:
           - const: st,asm330lhhx
           - const: st,lsm6dsr
       - items:
           - const: st,lsm6dstx
           - const: st,lsm6dst
+      - items:
+          - const: st,lsm6dsv16x
+          - const: st,lsm6dsv
+      - items:
+          - const: st,ism330is
+          - const: st,lsm6dso16is
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/iio/multiplexer/io-channel-mux.yaml b/dts/Bindings/iio/multiplexer/io-channel-mux.yaml
index 611ad4444c..c55831b60e 100644
--- a/dts/Bindings/iio/multiplexer/io-channel-mux.yaml
+++ b/dts/Bindings/iio/multiplexer/io-channel-mux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: I/O channel multiplexer bindings
+title: I/O channel multiplexer
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
diff --git a/dts/Bindings/iio/pressure/meas,ms5611.yaml b/dts/Bindings/iio/pressure/meas,ms5611.yaml
index 4f06707450..21e6ddb7f4 100644
--- a/dts/Bindings/iio/pressure/meas,ms5611.yaml
+++ b/dts/Bindings/iio/pressure/meas,ms5611.yaml
@@ -30,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -52,6 +55,7 @@ examples:
             compatible = "meas,ms5611";
             reg = <0>;
             vdd-supply = <&ldo_3v3_gnss>;
+            spi-max-frequency = <20000000>;
         };
     };
 ...
diff --git a/dts/Bindings/iio/pressure/murata,zpa2326.yaml b/dts/Bindings/iio/pressure/murata,zpa2326.yaml
index d6103be034..c33640ddde 100644
--- a/dts/Bindings/iio/pressure/murata,zpa2326.yaml
+++ b/dts/Bindings/iio/pressure/murata,zpa2326.yaml
@@ -33,7 +33,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/proximity/ams,as3935.yaml b/dts/Bindings/iio/proximity/ams,as3935.yaml
index 7fcba5d6d5..710d3b9a86 100644
--- a/dts/Bindings/iio/proximity/ams,as3935.yaml
+++ b/dts/Bindings/iio/proximity/ams,as3935.yaml
@@ -49,7 +49,10 @@ required:
   - spi-cpha
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/iio/resolver/adi,ad2s90.yaml b/dts/Bindings/iio/resolver/adi,ad2s90.yaml
index 81e4bdfc17..b24e5a202a 100644
--- a/dts/Bindings/iio/resolver/adi,ad2s90.yaml
+++ b/dts/Bindings/iio/resolver/adi,ad2s90.yaml
@@ -33,8 +33,6 @@ properties:
 
   spi-cpha: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -43,6 +41,11 @@ dependencies:
   spi-cpol: [ spi-cpha ]
   spi-cpha: [ spi-cpol ]
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/dts/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
index 722781aa46..b69813f281 100644
--- a/dts/Bindings/iio/temperature/adi,ltc2983.yaml
+++ b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
@@ -4,19 +4,30 @@
 $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices LTC2983 Multi-sensor Temperature system
+title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system
 
 maintainers:
   - Nuno Sá <nuno.sa@analog.com>
 
 description: |
-  Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
+  Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital
+  Temperature Measurement Systems
+
   https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf
 
 properties:
   compatible:
-    enum:
-      - adi,ltc2983
+    oneOf:
+      - enum:
+          - adi,ltc2983
+          - adi,ltc2986
+          - adi,ltm2985
+      - items:
+          - const: adi,ltc2984
+          - const: adi,ltc2983
 
   reg:
     maxItems: 1
@@ -25,26 +36,26 @@ properties:
     maxItems: 1
 
   adi,mux-delay-config-us:
-    description:
-      The LTC2983 performs 2 or 3 internal conversion cycles per temperature
-      result. Each conversion cycle is performed with different excitation and
-      input multiplexer configurations. Prior to each conversion, these
-      excitation circuits and input switch configurations are changed and an
-      internal 1ms delay ensures settling prior to the conversion cycle in most
-      cases. An extra delay can be configured using this property. The value is
-      rounded to nearest 100us.
+    description: |
+      Extra delay prior to each conversion, in addition to the internal 1ms
+      delay, for the multiplexer to switch input configurations and
+      excitation values.
+
+      This property is supposed to be in microseconds, but to maintain
+      compatibility, this value will be multiplied by 100 before usage.
     maximum: 255
+    default: 0
 
   adi,filter-notch-freq:
     description:
-      Set's the default setting of the digital filter. The default is
-      simultaneous 50/60Hz rejection.
+      Notch frequency of the digital filter.
       0 - 50/60Hz rejection
       1 - 60Hz rejection
       2 - 50Hz rejection
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 2
+    default: 0
 
   '#address-cells':
     const: 1
@@ -53,19 +64,20 @@ properties:
     const: 0
 
 patternProperties:
-  "@([1-9]|1[0-9]|20)$":
+  "@([0-9a-f]+)$":
     type: object
+    description: Sensor.
 
     properties:
       reg:
         description:
-          The channel number. It can be connected to one of the 20 channels of
-          the device.
+          Channel number. Connects the sensor to the channel with this number
+          of the device.
         minimum: 1
         maximum: 20
 
       adi,sensor-type:
-        description: Identifies the type of sensor connected to the device.
+        description: Type of sensor connected to the device.
         $ref: /schemas/types.yaml#/definitions/uint32
 
     required:
@@ -74,9 +86,7 @@ patternProperties:
 
   "^thermocouple@":
     type: object
-    description:
-      Represents a thermocouple sensor which is connected to one of the device
-      channels.
+    description: Thermocouple sensor.
 
     properties:
       adi,sensor-type:
@@ -95,86 +105,87 @@ patternProperties:
         maximum: 9
 
       adi,single-ended:
-        description:
-          Boolean property which set's the thermocouple as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,sensor-oc-current-microamp:
-        description:
-          This property set's the pulsed current value applied during
-          open-circuit detect.
+        description: Pulsed current value applied during open-circuit detect.
         enum: [10, 100, 500, 1000]
+        default: 10
 
       adi,cold-junction-handle:
         description:
-          Phandle which points to a sensor object responsible for measuring
-          the thermocouple cold junction temperature.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+          Sensor responsible for measuring the thermocouple cold junction
+          temperature.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,custom-thermocouple:
         description:
-          This is a table, where each entry should be a pair of
-          voltage(mv)-temperature(K). The entries must be given in nv and uK
-          so that, the original values must be multiplied by 1000000. For
-          more details look at table 69 and 70.
-          Note should be signed, but dtc doesn't currently maintain the
-          sign.
+          Used for digitizing custom thermocouples.
+          See Page 59 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
-          minItems: 2
-          maxItems: 2
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
+
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 9
+        then:
+          required:
+            - adi,custom-thermocouple
 
   "^diode@":
     type: object
-    description:
-      Represents a diode sensor which is connected to one of the device
-      channels.
+    description: Diode sensor.
 
     properties:
       adi,sensor-type:
-        description: Identifies the sensor as a diode.
+        description: Sensor type for diodes.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 28
 
       adi,single-ended:
-        description: Boolean property which set's the diode as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,three-conversion-cycles:
         description:
-          Boolean property which set's three conversion cycles removing
-          parasitic resistance effects between the LTC2983 and the diode.
+          Whether to use three conversion cycles to remove parasitic
+          resistance between the device and the diode.
         type: boolean
 
       adi,average-on:
         description:
-          Boolean property which enables a running average of the diode
-          temperature reading. This reduces the noise when the diode is used
-          as a cold junction temperature element on an isothermal block
-          where temperatures change slowly.
+          Whether to use a running average of the diode temperature
+          reading to reduce the noise when the diode is used as a cold
+          junction temperature element on an isothermal block where
+          temperatures change slowly.
         type: boolean
 
       adi,excitation-current-microamp:
         description:
-          This property controls the magnitude of the excitation current
-          applied to the diode. Depending on the number of conversions
-          cycles, this property will assume different predefined values on
-          each cycle. Just set the value of the first cycle (1l).
+          Magnitude of the 1l excitation current applied to the diode.
+          4l excitation current will be 4 times this value, and 8l
+          excitation current will be 8 times value.
         enum: [10, 20, 40, 80]
+        default: 10
 
       adi,ideal-factor-value:
         description:
-          This property sets the diode ideality factor. The real value must
-          be multiplied by 1000000 to remove the fractional part. For more
-          information look at table 20 of the datasheet.
+          Diode ideality factor.
+          Set this property to 1000000 times the real value.
         $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
 
   "^rtd@":
     type: object
-    description:
-      Represents a rtd sensor which is connected to one of the device channels.
+    description: RTD sensor.
 
     properties:
       reg:
@@ -197,68 +208,82 @@ patternProperties:
         maximum: 18
 
       adi,rsense-handle:
-        description:
-          Phandle pointing to a rsense object associated with this RTD.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,number-of-wires:
         description:
-          Identifies the number of wires used by the RTD. Setting this
-          property to 5 means 4 wires with Kelvin Rsense.
+          Number of wires used by the RTD.
+          5 means 4 wires with Kelvin sense resistor.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [2, 3, 4, 5]
+        default: 2
 
       adi,rsense-share:
         description:
-          Boolean property which enables Rsense sharing, where one sense
-          resistor is used for multiple 2-, 3-, and/or 4-wire RTDs.
-        type: boolean
-
-      adi,current-rotate:
-        description:
-          Boolean property which enables excitation current rotation to
-          automatically remove parasitic thermocouple effects. Note that
-          this property is not allowed for 2- and 3-wire RTDs.
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
         type: boolean
 
       adi,excitation-current-microamp:
-        description:
-          This property controls the magnitude of the excitation current
-          applied to the RTD.
+        description: Excitation current applied to the RTD.
         enum: [5, 10, 25, 50, 100, 250, 500, 1000]
+        default: 5
 
       adi,rtd-curve:
-        description:
-          This property set the RTD curve used and the corresponding
-          Callendar-VanDusen constants. Look at table 30 of the datasheet.
+        description: |
+          RTD curve and the corresponding Callendar-VanDusen constants.
+          0 - European
+          1 - American
+          2 - Japanese
+          3 - ITS-90
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3
+        default: 0
 
       adi,custom-rtd:
         description:
-          This is a table, where each entry should be a pair of
-          resistance(ohm)-temperature(K). The entries added here are in uohm
-          and uK. For more details values look at table 74 and 75.
+          Used for digitizing custom RTDs.
+          See Page 62 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
         items:
-          minItems: 3
-          maxItems: 64
           items:
-            minItems: 2
-            maxItems: 2
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
 
     required:
       - adi,rsense-handle
 
-    dependencies:
-      adi,current-rotate: [ "adi,rsense-share" ]
+    allOf:
+      - if:
+          properties:
+            adi,number-of-wires:
+              const: 4
+        then:
+          properties:
+            adi,current-rotate:
+              description:
+                Whether to enable excitation current rotation to automatically
+                remove parasitic thermocouple effects.
+              type: boolean
+
+          dependencies:
+            adi,current-rotate: [ "adi,rsense-share" ]
+
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 18
+        then:
+          required:
+            - adi,custom-rtd
 
   "^thermistor@":
     type: object
-    description:
-      Represents a thermistor sensor which is connected to one of the device
-      channels.
+    description: Thermistor sensor.
 
     properties:
       adi,sensor-type:
@@ -277,61 +302,53 @@ patternProperties:
         maximum: 27
 
       adi,rsense-handle:
-        description:
-          Phandle pointing to a rsense object associated with this
-          thermistor.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,single-ended:
-        description:
-          Boolean property which set's the thermistor as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,rsense-share:
         description:
-          Boolean property which enables Rsense sharing, where one sense
-          resistor is used for multiple thermistors. Note that this property
-          is ignored if adi,single-ended is set.
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
         type: boolean
 
       adi,current-rotate:
         description:
-          Boolean property which enables excitation current rotation to
-          automatically remove parasitic thermocouple effects.
+          Whether to enable excitation current rotation to automatically
+          remove parasitic thermocouple effects.
         type: boolean
 
       adi,excitation-current-nanoamp:
         description:
-          This property controls the magnitude of the excitation current
-          applied to the thermistor. Value 0 set's the sensor in auto-range
-          mode.
-        $ref: /schemas/types.yaml#/definitions/uint32
+          Excitation current applied to the thermistor.
+          0 sets the sensor in auto-range mode.
         enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
                500000, 1000000]
+        default: 0
 
       adi,custom-thermistor:
         description:
-          This is a table, where each entry should be a pair of
-          resistance(ohm)-temperature(K). The entries added here are in uohm
-          and uK only for custom thermistors. For more details look at table
-          78 and 79.
+          Used for digitizing custom thermistors.
+          See Page 65 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
-          minItems: 2
-          maxItems: 2
+          items:
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
 
       adi,custom-steinhart:
         description:
-          Steinhart-Hart coefficients are also supported and can
-          be programmed into the device memory using this property. For
-          Steinhart sensors the coefficients are given in the raw
-          format. Look at table 82 for more information.
+          Steinhart-Hart coefficients in raw format, used for digitizing
+          custom thermistors.
+          See Page 68 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
-          minItems: 6
-          maxItems: 6
+        minItems: 6
+        maxItems: 6
 
     required:
       - adi,rsense-handle
@@ -339,25 +356,78 @@ patternProperties:
     dependencies:
       adi,current-rotate: [ "adi,rsense-share" ]
 
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 26
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-steinhart
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 27
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-thermistor
+
   "^adc@":
     type: object
-    description: Represents a channel which is being used as a direct adc.
+    description: Direct ADC sensor.
 
     properties:
       adi,sensor-type:
-        description: Identifies the sensor as a direct adc.
+        description: Sensor type for direct ADC sensors.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 30
 
       adi,single-ended:
-        description: Boolean property which set's the adc as single-ended.
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+  "^temp@":
+    type: object
+    description: Active analog temperature sensor.
+
+    properties:
+      adi,sensor-type:
+        description: Sensor type for active analog temperature sensors.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 31
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
         type: boolean
 
+      adi,custom-temp:
+        description:
+          Used for digitizing active analog temperature sensors.
+          See Page 67 of the LTM2985 datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
+        items:
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
+
+    required:
+      - adi,custom-temp
+
   "^rsense@":
     type: object
-    description:
-      Represents a rsense which is connected to one of the device channels.
-      Rsense are used by thermistors and RTD's.
+    description: Sense resistor sensor.
 
     properties:
       reg:
@@ -365,14 +435,12 @@ patternProperties:
         maximum: 20
 
       adi,sensor-type:
-        description: Identifies the sensor as a rsense.
+        description: Sensor type sense resistor sensors.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 29
 
       adi,rsense-val-milli-ohms:
-        description:
-          Sets the value of the sense resistor. Look at table 20 of the
-          datasheet for information.
+        description: Value of the sense resistor.
 
     required:
       - adi,rsense-val-milli-ohms
@@ -384,6 +452,18 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ltc2983
+              - adi,ltc2984
+    then:
+      patternProperties:
+        "^temp@": false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -391,7 +471,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        sensor_ltc2983: ltc2983@0 {
+        temperature-sensor@0 {
                 compatible = "adi,ltc2983";
                 reg = <0>;
 
diff --git a/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5d631f7137..5efceb3138 100644
--- a/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -16,7 +16,9 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-          - const: allwinner,sun50i-a64-lradc
+          - enum:
+              - allwinner,suniv-f1c100s-lradc
+              - allwinner,sun50i-a64-lradc
           - const: allwinner,sun8i-a83t-r-lradc
       - const: allwinner,sun50i-r329-lradc
       - items:
diff --git a/dts/Bindings/input/azoteq,iqs7222.yaml b/dts/Bindings/input/azoteq,iqs7222.yaml
index 02e605fac4..9ddba7f2e7 100644
--- a/dts/Bindings/input/azoteq,iqs7222.yaml
+++ b/dts/Bindings/input/azoteq,iqs7222.yaml
@@ -473,9 +473,6 @@ patternProperties:
               Specifies whether the event is to be interpreted as a key (1)
               or a switch (5).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     dependencies:
@@ -501,7 +498,7 @@ patternProperties:
 
       azoteq,slider-size:
         $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
+        minimum: 1
         maximum: 65535
         description:
           Specifies the slider's one-dimensional resolution, equal to the
@@ -575,9 +572,9 @@ patternProperties:
           linux,code: true
 
           azoteq,gesture-max-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 1020
+            maximum: 4080
             description:
               Specifies the length of time (in ms) within which a tap, swipe
               or flick gesture must be completed in order to be acknowledged
@@ -585,9 +582,9 @@ patternProperties:
               gesture applies to all remaining swipe or flick gestures.
 
           azoteq,gesture-min-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 124
+            maximum: 496
             description:
               Specifies the length of time (in ms) for which a tap gesture must
               be held in order to be acknowledged by the device.
@@ -620,9 +617,6 @@ patternProperties:
               GPIO, they must all be of the same type (proximity, touch or
               slider gesture).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     required:
@@ -693,6 +687,7 @@ allOf:
           properties:
             azoteq,slider-size:
               multipleOf: 16
+              minimum: 16
               maximum: 4080
 
             azoteq,top-speed:
@@ -935,14 +930,14 @@ examples:
 
                             event-tap {
                                     linux,code = <KEY_PLAYPAUSE>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-min-ms = <24>;
+                                    azoteq,gesture-max-ms = <400>;
+                                    azoteq,gesture-min-ms = <32>;
                             };
 
                             event-flick-pos {
                                     linux,code = <KEY_NEXTSONG>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-dist = <816>;
+                                    azoteq,gesture-max-ms = <800>;
+                                    azoteq,gesture-dist = <800>;
                             };
 
                             event-flick-neg {
diff --git a/dts/Bindings/input/fsl,scu-key.yaml b/dts/Bindings/input/fsl,scu-key.yaml
index e6266d1882..e5a3c355ee 100644
--- a/dts/Bindings/input/fsl,scu-key.yaml
+++ b/dts/Bindings/input/fsl,scu-key.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - SCU Key Based on SCU Message Protocol
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/input/gpio-beeper.txt b/dts/Bindings/input/gpio-beeper.txt
deleted file mode 100644
index a5086e37fc..0000000000
--- a/dts/Bindings/input/gpio-beeper.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* GPIO beeper device tree bindings
-
-Register a beeper connected to GPIO pin.
-
-Required properties:
-- compatible:	Should be "gpio-beeper".
-- gpios:	From common gpio binding; gpio connection to beeper enable pin.
-
-Example:
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/dts/Bindings/input/gpio-beeper.yaml b/dts/Bindings/input/gpio-beeper.yaml
new file mode 100644
index 0000000000..290372add3
--- /dev/null
+++ b/dts/Bindings/input/gpio-beeper.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled beeper
+
+maintainers:
+  - Fabio Estevam <festevam@denx.de>
+
+properties:
+  compatible:
+    const: gpio-beeper
+
+  gpios:
+    maxItems: 1
+    description:
+      GPIO that drives the beeper.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    beeper {
+        compatible = "gpio-beeper";
+        gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/dts/Bindings/input/gpio-keys.yaml b/dts/Bindings/input/gpio-keys.yaml
index 17ac9dff79..159cd9d9fe 100644
--- a/dts/Bindings/input/gpio-keys.yaml
+++ b/dts/Bindings/input/gpio-keys.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device-Tree bindings for GPIO attached keys
+title: GPIO attached keys
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/dts/Bindings/input/input.yaml b/dts/Bindings/input/input.yaml
index 17512f4347..94f7942189 100644
--- a/dts/Bindings/input/input.yaml
+++ b/dts/Bindings/input/input.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/input.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common input schema binding
+title: Input Devices Common Properties
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/dts/Bindings/input/matrix-keymap.yaml b/dts/Bindings/input/matrix-keymap.yaml
index 6699d5e32d..4d6dbe9164 100644
--- a/dts/Bindings/input/matrix-keymap.yaml
+++ b/dts/Bindings/input/matrix-keymap.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/matrix-keymap.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common key matrices binding for matrix-connected key boards
+title: Common Key Matrices on Matrix-connected Key Boards
 
 maintainers:
   - Olof Johansson <olof@lixom.net>
diff --git a/dts/Bindings/input/microchip,cap11xx.yaml b/dts/Bindings/input/microchip,cap11xx.yaml
index 96358b12f9..67d4d8f86a 100644
--- a/dts/Bindings/input/microchip,cap11xx.yaml
+++ b/dts/Bindings/input/microchip,cap11xx.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/input/microchip,cap11xx.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Device tree bindings for Microchip CAP11xx based capacitive touch sensors
+title: Microchip CAP11xx based capacitive touch sensors
 
 description: |
   The Microchip CAP1xxx Family of RightTouchTM multiple-channel capacitive
diff --git a/dts/Bindings/input/pine64,pinephone-keyboard.yaml b/dts/Bindings/input/pine64,pinephone-keyboard.yaml
index e4a0ac0fff..490f6c3d9e 100644
--- a/dts/Bindings/input/pine64,pinephone-keyboard.yaml
+++ b/dts/Bindings/input/pine64,pinephone-keyboard.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Pine64 PinePhone keyboard device tree bindings
+title: Pine64 PinePhone keyboard
 
 maintainers:
   - Samuel Holland <samuel@sholland.org>
diff --git a/dts/Bindings/input/qcom,pm8921-pwrkey.yaml b/dts/Bindings/input/qcom,pm8921-pwrkey.yaml
new file mode 100644
index 0000000000..12c74c0832
--- /dev/null
+++ b/dts/Bindings/input/qcom,pm8921-pwrkey.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8921-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8921 PMIC Power Key
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8921-pwrkey
+          - qcom,pm8058-pwrkey
+      - items:
+          - enum:
+              - qcom,pm8018-pwrkey
+          - const: qcom,pm8921-pwrkey
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: key release
+      - description: key press
+
+  debounce:
+    description:
+      Time in microseconds that key must be pressed or
+      released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  pull-up:
+    description:
+      Presence of this property indicates that the KPDPWR_N
+      pin should be configured for pull up.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   ssbi {
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     pmic@0 {
+       reg = <0x0>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pwrkey@1c {
+         compatible = "qcom,pm8921-pwrkey";
+         reg = <0x1c>;
+         interrupt-parent = <&pmicint>;
+         interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+         debounce = <15625>;
+         pull-up;
+       };
+     };
+   };
+...
diff --git a/dts/Bindings/input/qcom,pm8xxx-pwrkey.txt b/dts/Bindings/input/qcom,pm8xxx-pwrkey.txt
deleted file mode 100644
index 588536cc96..0000000000
--- a/dts/Bindings/input/qcom,pm8xxx-pwrkey.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Qualcomm PM8xxx PMIC Power Key
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-pwrkey"
-		    "qcom,pm8921-pwrkey"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of power key control register
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first interrupt specifies the key release interrupt
-		    and the second interrupt specifies the key press interrupt.
-		    The format of the specifier is defined by the binding
-		    document describing the node's interrupt parent.
-
-- debounce:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in microseconds that key must be pressed or release
-		    for state change interrupt to trigger.
-
-- pull-up:
-	Usage: optional
-	Value type: <empty>
-	Definition: presence of this property indicates that the KPDPWR_N pin
-		    should be configured for pull up.
-
-EXAMPLE
-
-	pwrkey@1c {
-		compatible = "qcom,pm8921-pwrkey";
-		reg = <0x1c>;
-		interrupt-parent = <&pmicintc>;
-		interrupts = <50 1>, <51 1>;
-		debounce = <15625>;
-		pull-up;
-	};
diff --git a/dts/Bindings/input/ti,drv260x.txt b/dts/Bindings/input/ti,drv260x.txt
deleted file mode 100644
index 4c5312eaaa..0000000000
--- a/dts/Bindings/input/ti,drv260x.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Texas Instruments - drv260x Haptics driver family
-
-Required properties:
-	- compatible - One of:
-		"ti,drv2604" - DRV2604
-		"ti,drv2605" - DRV2605
-		"ti,drv2605l" - DRV2605L
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-	- mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
-		DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
-				sequence during init.  And the device is configured for real
-				time playback mode (RTP mode).
-		DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
-	- library-sel - These are ROM based waveforms pre-programmed into the IC.
-				This should be set to set the library to use at power up.
-				(defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LIB_EMPTY - Do not use a pre-programmed library
-		DRV260X_ERM_LIB_A - Pre-programmed Library
-		DRV260X_ERM_LIB_B - Pre-programmed Library
-		DRV260X_ERM_LIB_C - Pre-programmed Library
-		DRV260X_ERM_LIB_D - Pre-programmed Library
-		DRV260X_ERM_LIB_E - Pre-programmed Library
-		DRV260X_ERM_LIB_F - Pre-programmed Library
-		DRV260X_LIB_LRA - Pre-programmed LRA Library
-
-Optional properties:
-	- enable-gpio - gpio pin to enable/disable the device.
-	- vib-rated-mv - The rated voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-	- vib-overdrive-mv - The overdrive voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-Example:
-
-haptics: haptics@5a {
-	compatible = "ti,drv2605l";
-	reg = <0x5a>;
-	vbat-supply = <&vbat>;
-	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	mode = <DRV260X_LRA_MODE>;
-	library-sel = <DRV260X_LIB_LRA>;
-	vib-rated-mv = <3200>;
-	vib-overdrive-mv = <3200>;
-}
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2605
diff --git a/dts/Bindings/input/ti,drv260x.yaml b/dts/Bindings/input/ti,drv260x.yaml
new file mode 100644
index 0000000000..c6245c5b9e
--- /dev/null
+++ b/dts/Bindings/input/ti,drv260x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv260x Haptics driver family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2604
+      - ti,drv2605
+      - ti,drv2605l
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Power supply to the haptic motor
+
+  # TODO: Deprecate 'mode' in favor of differently named property
+  mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Power up mode of the chip
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LRA_MODE
+        Linear Resonance Actuator mode (Piezoelectric)
+
+      DRV260X_LRA_NO_CAL_MODE
+        This is a LRA Mode but there is no calibration sequence during init.
+        And the device is configured for real time playback mode (RTP mode).
+
+      DRV260X_ERM_MODE
+        Eccentric Rotating Mass mode (Rotary vibrator)
+    enum: [ 0, 1, 2 ]
+
+  library-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      These are ROM based waveforms pre-programmed into the IC.
+      This should be set to set the library to use at power up.
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+      DRV260X_ERM_LIB_A - Pre-programmed Library
+      DRV260X_ERM_LIB_B - Pre-programmed Library
+      DRV260X_ERM_LIB_C - Pre-programmed Library
+      DRV260X_ERM_LIB_D - Pre-programmed Library
+      DRV260X_ERM_LIB_E - Pre-programmed Library
+      DRV260X_ERM_LIB_F - Pre-programmed Library
+      DRV260X_LIB_LRA - Pre-programmed LRA Library
+    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+
+  enable-gpio:
+    maxItems: 1
+    deprecated: true
+
+  enable-gpios:
+    maxItems: 1
+
+  vib-rated-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The rated voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+  vib-overdrive-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The overdrive voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mode
+  - library-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/ti-drv260x.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@5a {
+            compatible = "ti,drv2605l";
+            reg = <0x5a>;
+            vbat-supply = <&vbat>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            mode = <DRV260X_LRA_MODE>;
+            library-sel = <DRV260X_LIB_LRA>;
+            vib-rated-mv = <3200>;
+            vib-overdrive-mv = <3200>;
+        };
+    };
diff --git a/dts/Bindings/input/touchscreen/chipone,icn8318.yaml b/dts/Bindings/input/touchscreen/chipone,icn8318.yaml
index 9df685bdc5..74a8a01e07 100644
--- a/dts/Bindings/input/touchscreen/chipone,icn8318.yaml
+++ b/dts/Bindings/input/touchscreen/chipone,icn8318.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+title: ChipOne ICN8318 Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/dts/Bindings/input/touchscreen/cypress,cy8ctma140.yaml b/dts/Bindings/input/touchscreen/cypress,cy8ctma140.yaml
index 3225c8d1fd..86a6d18f95 100644
--- a/dts/Bindings/input/touchscreen/cypress,cy8ctma140.yaml
+++ b/dts/Bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cypress CY8CTMA140 series touchscreen controller bindings
+title: Cypress CY8CTMA140 series touchscreen controller
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/dts/Bindings/input/touchscreen/cypress,cy8ctma340.yaml b/dts/Bindings/input/touchscreen/cypress,cy8ctma340.yaml
index 762e56ee90..4dfbb93678 100644
--- a/dts/Bindings/input/touchscreen/cypress,cy8ctma340.yaml
+++ b/dts/Bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cypress CY8CTMA340 series touchscreen controller bindings
+title: Cypress CY8CTMA340 series touchscreen controller
 
 description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after
   the marketing name Cypress TrueTouch Standard Product) touchscreens can
diff --git a/dts/Bindings/input/touchscreen/cypress,tt21000.yaml b/dts/Bindings/input/touchscreen/cypress,tt21000.yaml
new file mode 100644
index 0000000000..1959ec3947
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/cypress,tt21000.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress TT21000 touchscreen controller
+
+description: The Cypress TT21000 series (also known as "CYTTSP5" after
+  the marketing name Cypress TrueTouch Standard Product series 5).
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: cypress,tt21000
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator for voltage.
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,keycodes:
+    description: EV_ABS specific event code generated by the axis.
+
+patternProperties:
+  "^button@[0-9]+$":
+    type: object
+    $ref: ../input.yaml#
+    properties:
+      reg:
+        maxItems: 1
+      linux,keycodes:
+        description: Keycode to emit
+
+    required:
+      - reg
+      - linux,keycodes
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@24 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "cypress,tt21000";
+            reg = <0x24>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&tp_reset_ds203>;
+            interrupt-parent = <&pio>;
+            interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg_touch>;
+
+            button@0 {
+                reg = <0>;
+                linux,keycodes = <KEY_HOMEPAGE>;
+            };
+
+            button@1 {
+                reg = <1>;
+                linux,keycodes = <KEY_MENU>;
+            };
+
+            button@2 {
+                reg = <2>;
+                linux,keycodes = <KEY_BACK>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/input/touchscreen/edt-ft5x06.yaml b/dts/Bindings/input/touchscreen/edt-ft5x06.yaml
index 46bc8c028f..ef4c841387 100644
--- a/dts/Bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/dts/Bindings/input/touchscreen/edt-ft5x06.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: FocalTech EDT-FT5x06 Polytouch Bindings
+title: FocalTech EDT-FT5x06 Polytouch
 
 description: |
              There are 5 variants of the chip for various touch panel sizes
diff --git a/dts/Bindings/input/touchscreen/egalax-ts.txt b/dts/Bindings/input/touchscreen/egalax-ts.txt
index 92fb2620f5..ebbe938105 100644
--- a/dts/Bindings/input/touchscreen/egalax-ts.txt
+++ b/dts/Bindings/input/touchscreen/egalax-ts.txt
@@ -13,6 +13,6 @@ Example:
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <9 2>;
-		wakeup-gpios = <&gpio1 9 0>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	};
diff --git a/dts/Bindings/input/touchscreen/goodix.yaml b/dts/Bindings/input/touchscreen/goodix.yaml
index 19ac9da421..3d016b87c8 100644
--- a/dts/Bindings/input/touchscreen/goodix.yaml
+++ b/dts/Bindings/input/touchscreen/goodix.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Goodix GT9xx series touchscreen controller Bindings
+title: Goodix GT9xx series touchscreen controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/dts/Bindings/input/touchscreen/himax,hx83112b.yaml b/dts/Bindings/input/touchscreen/himax,hx83112b.yaml
new file mode 100644
index 0000000000..f42b23d532
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/himax,hx83112b.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax hx83112b touchscreen controller
+
+maintainers:
+  - Job Noorman <job@noorman.info>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - himax,hx83112b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@48 {
+        compatible = "himax,hx83112b";
+        reg = <0x48>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+        touchscreen-size-x = <1080>;
+        touchscreen-size-y = <2160>;
+        reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/input/touchscreen/hycon,hy46xx.yaml b/dts/Bindings/input/touchscreen/hycon,hy46xx.yaml
index 942562f1e4..874c0781c4 100644
--- a/dts/Bindings/input/touchscreen/hycon,hy46xx.yaml
+++ b/dts/Bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hycon HY46XX series touchscreen controller bindings
+title: Hycon HY46XX series touchscreen controller
 
 description: |
   There are 6 variants of the chip for various touch panel sizes and cover lens material
diff --git a/dts/Bindings/input/touchscreen/hynitron,cstxxx.yaml b/dts/Bindings/input/touchscreen/hynitron,cstxxx.yaml
new file mode 100644
index 0000000000..9cb5d4af00
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/hynitron,cstxxx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cstxxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hynitron cstxxx series touchscreen controller
+
+description: |
+  Bindings for Hynitron cstxxx series multi-touch touchscreen
+  controllers.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hynitron,cst340
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@1a {
+        compatible = "hynitron,cst340";
+        reg = <0x1a>;
+        interrupt-parent = <&gpio4>;
+        interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+        touchscreen-size-x = <640>;
+        touchscreen-size-y = <480>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml b/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml
index e3a2b871e5..0d6b033fd5 100644
--- a/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml
+++ b/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Imagis IST30XXC family touchscreen controller bindings
+title: Imagis IST30XXC family touchscreen controller
 
 maintainers:
   - Markuss Broks <markuss.broks@gmail.com>
diff --git a/dts/Bindings/input/touchscreen/melfas,mms114.yaml b/dts/Bindings/input/touchscreen/melfas,mms114.yaml
index 62366886fb..fdd02898e2 100644
--- a/dts/Bindings/input/touchscreen/melfas,mms114.yaml
+++ b/dts/Bindings/input/touchscreen/melfas,mms114.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melfas MMS114 family touchscreen controller bindings
+title: Melfas MMS114 family touchscreen controller
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/dts/Bindings/input/touchscreen/mstar,msg2638.yaml b/dts/Bindings/input/touchscreen/mstar,msg2638.yaml
index 3a42c23faf..ddbbc820c7 100644
--- a/dts/Bindings/input/touchscreen/mstar,msg2638.yaml
+++ b/dts/Bindings/input/touchscreen/mstar,msg2638.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MStar msg2638 touchscreen controller Bindings
+title: MStar msg2638 touchscreen controller
 
 maintainers:
   - Vincent Knecht <vincent.knecht@mailoo.org>
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: mstar,msg2638
+    enum:
+      - mstar,msg2138
+      - mstar,msg2638
 
   reg:
     const: 0x26
@@ -34,6 +36,10 @@ properties:
   touchscreen-size-x: true
   touchscreen-size-y: true
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 4
+
 additionalProperties: false
 
 required:
diff --git a/dts/Bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/dts/Bindings/input/touchscreen/pixcir,pixcir_ts.yaml
index f9998edbff..3305eda5ed 100644
--- a/dts/Bindings/input/touchscreen/pixcir,pixcir_ts.yaml
+++ b/dts/Bindings/input/touchscreen/pixcir,pixcir_ts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Pixcir Touchscreen Controller Device Tree Bindings
+title: Pixcir Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/dts/Bindings/input/touchscreen/silead,gsl1680.yaml b/dts/Bindings/input/touchscreen/silead,gsl1680.yaml
index eec6f7f6f0..95b554be25 100644
--- a/dts/Bindings/input/touchscreen/silead,gsl1680.yaml
+++ b/dts/Bindings/input/touchscreen/silead,gsl1680.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Silead GSL1680 Touchscreen Controller Device Tree Bindings
+title: Silead GSL1680 Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/dts/Bindings/input/touchscreen/ti,tsc2005.yaml b/dts/Bindings/input/touchscreen/ti,tsc2005.yaml
index 938aab016c..7187c390b2 100644
--- a/dts/Bindings/input/touchscreen/ti,tsc2005.yaml
+++ b/dts/Bindings/input/touchscreen/ti,tsc2005.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller
 
 maintainers:
   - Marek Vasut <marex@denx.de>
diff --git a/dts/Bindings/input/touchscreen/touchscreen.yaml b/dts/Bindings/input/touchscreen/touchscreen.yaml
index 4b5b212c77..895592da96 100644
--- a/dts/Bindings/input/touchscreen/touchscreen.yaml
+++ b/dts/Bindings/input/touchscreen/touchscreen.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common touchscreen Bindings
+title: Common touchscreen
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/dts/Bindings/input/touchscreen/zinitix,bt400.yaml b/dts/Bindings/input/touchscreen/zinitix,bt400.yaml
index b4e5ba7c0b..b1507463a0 100644
--- a/dts/Bindings/input/touchscreen/zinitix,bt400.yaml
+++ b/dts/Bindings/input/touchscreen/zinitix,bt400.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Zinitix BT4xx and BT5xx series touchscreen controller bindings
+title: Zinitix BT4xx and BT5xx series touchscreen controller
 
 description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
   are Korea-produced touchscreens with embedded microcontrollers. The
diff --git a/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml b/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml
index be29e0b809..0c720dbde3 100644
--- a/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -25,9 +25,14 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-cpu-bwmon
+              - qcom,sc8280xp-cpu-bwmon
               - qcom,sdm845-bwmon
           - const: qcom,msm8998-bwmon
       - const: qcom,msm8998-bwmon       # BWMON v4
+      - items:
+          - enum:
+              - qcom,sc8280xp-llcc-bwmon
+          - const: qcom,sc7280-llcc-bwmon
       - const: qcom,sc7280-llcc-bwmon   # BWMON v5
       - const: qcom,sdm845-llcc-bwmon   # BWMON v5
 
diff --git a/dts/Bindings/interconnect/qcom,osm-l3.yaml b/dts/Bindings/interconnect/qcom,osm-l3.yaml
index bf538c0c5a..aadae4424b 100644
--- a/dts/Bindings/interconnect/qcom,osm-l3.yaml
+++ b/dts/Bindings/interconnect/qcom,osm-l3.yaml
@@ -16,13 +16,21 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7180-osm-l3
-      - qcom,sc7280-epss-l3
-      - qcom,sc8180x-osm-l3
-      - qcom,sdm845-osm-l3
-      - qcom,sm8150-osm-l3
-      - qcom,sm8250-epss-l3
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-osm-l3
+              - qcom,sc8180x-osm-l3
+              - qcom,sdm845-osm-l3
+              - qcom,sm8150-osm-l3
+          - const: qcom,osm-l3
+      - items:
+          - enum:
+              - qcom,sc7280-epss-l3
+              - qcom,sc8280xp-epss-l3
+              - qcom,sm8250-epss-l3
+              - qcom,sm8350-epss-l3
+          - const: qcom,epss-l3
 
   reg:
     maxItems: 1
@@ -56,7 +64,7 @@ examples:
     #define RPMH_CXO_CLK        0
 
     osm_l3: interconnect@17d41000 {
-      compatible = "qcom,sdm845-osm-l3";
+      compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
       reg = <0x17d41000 0x1400>;
 
       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/dts/Bindings/interrupt-controller/apple,aic.yaml b/dts/Bindings/interrupt-controller/apple,aic.yaml
index e18107eafe..698588e9aa 100644
--- a/dts/Bindings/interrupt-controller/apple,aic.yaml
+++ b/dts/Bindings/interrupt-controller/apple,aic.yaml
@@ -90,7 +90,6 @@ properties:
             maximum: 5
 
           cpus:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
             description:
               Should be a list of phandles to CPU nodes (as described in
               Documentation/devicetree/bindings/arm/cpus.yaml).
diff --git a/dts/Bindings/interrupt-controller/apple,aic2.yaml b/dts/Bindings/interrupt-controller/apple,aic2.yaml
index 47a78a167a..06948c0e36 100644
--- a/dts/Bindings/interrupt-controller/apple,aic2.yaml
+++ b/dts/Bindings/interrupt-controller/apple,aic2.yaml
@@ -69,6 +69,35 @@ properties:
   power-domains:
     maxItems: 1
 
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
 required:
   - compatible
   - '#interrupt-cells'
diff --git a/dts/Bindings/interrupt-controller/fsl,intmux.yaml b/dts/Bindings/interrupt-controller/fsl,intmux.yaml
index 1d6e0f64a8..985bfa4f6f 100644
--- a/dts/Bindings/interrupt-controller/fsl,intmux.yaml
+++ b/dts/Bindings/interrupt-controller/fsl,intmux.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale INTMUX interrupt multiplexer
 
 maintainers:
-  - Joakim Zhang <qiangqing.zhang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - NXP Linux Team <linux-imx@nxp.com>
 
 properties:
   compatible:
diff --git a/dts/Bindings/interrupt-controller/ingenic,intc.yaml b/dts/Bindings/interrupt-controller/ingenic,intc.yaml
index 0358a7739c..609308a5f9 100644
--- a/dts/Bindings/interrupt-controller/ingenic,intc.yaml
+++ b/dts/Bindings/interrupt-controller/ingenic,intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs interrupt controller devicetree bindings
+title: Ingenic SoCs interrupt controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/interrupt-controller/intel,ce4100-ioapic.txt b/dts/Bindings/interrupt-controller/intel,ce4100-ioapic.txt
deleted file mode 100644
index 7d19f494f1..0000000000
--- a/dts/Bindings/interrupt-controller/intel,ce4100-ioapic.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Interrupt chips
----------------
-
-* Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
-
-  Required properties:
-  --------------------
-     compatible = "intel,ce4100-ioapic";
-     #interrupt-cells = <2>;
-
-  Device's interrupt property:
-
-     interrupts = <P S>;
-
-  The first number (P) represents the interrupt pin which is wired to the
-  IO APIC. The second number (S) represents the sense of interrupt which
-  should be configured and can be one of:
-    0 - Edge Rising
-    1 - Level Low
-    2 - Level High
-    3 - Edge Falling
-
-* Local APIC
-  Required property:
-
-     compatible = "intel,ce4100-lapic";
diff --git a/dts/Bindings/interrupt-controller/intel,ce4100-ioapic.yaml b/dts/Bindings/interrupt-controller/intel,ce4100-ioapic.yaml
new file mode 100644
index 0000000000..39ab8cdd19
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/intel,ce4100-ioapic.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/intel,ce4100-ioapic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for I/O APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-ioapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ioapic1: interrupt-controller@fec00000 {
+        compatible = "intel,ce4100-ioapic";
+        reg = <0xfec00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/dts/Bindings/interrupt-controller/intel,ce4100-lapic.yaml b/dts/Bindings/interrupt-controller/intel,ce4100-lapic.yaml
new file mode 100644
index 0000000000..d2d0145cb8
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/intel,ce4100-lapic.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/intel,ce4100-lapic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel Local Advanced Programmable Interrupt Controller (LAPIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for local APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-lapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  intel,virtual-wire-mode:
+    description: Intel defines a few possible interrupt delivery
+      modes. With respect to boot/init time, mainly two interrupt
+      delivery modes are possible.
+      PIC Mode - Legacy external 8259 compliant PIC interrupt controller.
+      Virtual Wire Mode - use lapic as virtual wire interrupt delivery mode.
+      For ACPI or MPS spec compliant systems, it is figured out by some read
+      only bit field/s available in their respective defined data structures.
+      For OF based systems, it is by default set to PIC mode.
+      But if this optional boolean property is set, then the interrupt delivery
+      mode is configured to virtual wire compatibility mode.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    lapic0: interrupt-controller@fee00000 {
+        compatible = "intel,ce4100-lapic";
+        reg = <0xfee00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        intel,virtual-wire-mode;
+    };
diff --git a/dts/Bindings/interrupt-controller/loongarch,cpu-interrupt-controller.yaml b/dts/Bindings/interrupt-controller/loongarch,cpu-interrupt-controller.yaml
new file mode 100644
index 0000000000..2a1cf885c9
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/loongarch,cpu-interrupt-controller.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongarch,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPU Interrupt Controller
+
+maintainers:
+  - Liu Peibao <liupeibao@loongson.cn>
+
+properties:
+  compatible:
+    const: loongarch,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "loongarch,cpu-interrupt-controller";
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/dts/Bindings/interrupt-controller/mediatek,cirq.txt b/dts/Bindings/interrupt-controller/mediatek,cirq.txt
deleted file mode 100644
index 5865f4f2c6..0000000000
--- a/dts/Bindings/interrupt-controller/mediatek,cirq.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Mediatek 27xx cirq
-
-In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
-work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.
-The external interrupts (outside MCUSYS) will feed through CIRQ and connect
-to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
-interrupts and generate a pulse signal to parent interrupt controller when
-flush command is executed. With CIRQ, MCUSYS can be completely turned off
-to improve the system power consumption without losing interrupts.
-
-Required properties:
-- compatible: should be one of
-  - "mediatek,mt2701-cirq" for mt2701 CIRQ
-  - "mediatek,mt8135-cirq" for mt8135 CIRQ
-  - "mediatek,mt8173-cirq" for mt8173 CIRQ
-  and "mediatek,cirq" as a fallback.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the cirq registers and length of memory
-  mapped region.
-- mediatek,ext-irq-range: Identifies external irq number range in different
-  SOCs.
-
-Example:
-	cirq: interrupt-controller@10204000 {
-		compatible = "mediatek,mt2701-cirq",
-			     "mediatek,mtk-cirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&sysirq>;
-		reg = <0 0x10204000 0 0x400>;
-		mediatek,ext-irq-start = <32 200>;
-	};
diff --git a/dts/Bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/dts/Bindings/interrupt-controller/mediatek,mtk-cirq.yaml
new file mode 100644
index 0000000000..fdcb4d8db8
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Interrupt Controller
+
+maintainers:
+  - Youlin Pei <youlin.pei@mediatek.com>
+
+description:
+  In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to
+  work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC.
+  The external interrupts (outside MCUSYS) will feed through CIRQ and connect
+  to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
+  interrupts and generate a pulse signal to parent interrupt controller when
+  flush command is executed. With CIRQ, MCUSYS can be completely turned off
+  to improve the system power consumption without losing interrupts.
+
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-cirq
+          - mediatek,mt8135-cirq
+          - mediatek,mt8173-cirq
+          - mediatek,mt8192-cirq
+      - const: mediatek,mtk-cirq
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 3
+
+  interrupt-controller: true
+
+  mediatek,ext-irq-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: First CIRQ interrupt
+      - description: Last CIRQ interrupt
+    description:
+      Identifies the range of external interrupts in different SoCs
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - mediatek,ext-irq-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cirq: interrupt-controller@10204000 {
+        compatible = "mediatek,mt2701-cirq", "mediatek,mtk-cirq";
+        reg = <0x10204000 0x400>;
+        #interrupt-cells = <3>;
+        interrupt-controller;
+        interrupt-parent = <&sysirq>;
+        mediatek,ext-irq-range = <32 200>;
+    };
diff --git a/dts/Bindings/interrupt-controller/mrvl,intc.yaml b/dts/Bindings/interrupt-controller/mrvl,intc.yaml
index 5a583bf3db..9acc210284 100644
--- a/dts/Bindings/interrupt-controller/mrvl,intc.yaml
+++ b/dts/Bindings/interrupt-controller/mrvl,intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP/Orion Interrupt controller bindings
+title: Marvell MMP/Orion Interrupt controller
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
diff --git a/dts/Bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml b/dts/Bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
index 9ce6804bdb..2d6307a383 100644
--- a/dts/Bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
+++ b/dts/Bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/nuvoton,wpcm450-aic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Nuvoton WPCM450 Advanced Interrupt Controller bindings
+title: Nuvoton WPCM450 Advanced Interrupt Controller
 
 maintainers:
   - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
diff --git a/dts/Bindings/interrupt-controller/qcom,pdc.yaml b/dts/Bindings/interrupt-controller/qcom,pdc.yaml
index b6f56cf5fb..94791e261c 100644
--- a/dts/Bindings/interrupt-controller/qcom,pdc.yaml
+++ b/dts/Bindings/interrupt-controller/qcom,pdc.yaml
@@ -28,11 +28,15 @@ properties:
       - enum:
           - qcom,sc7180-pdc
           - qcom,sc7280-pdc
+          - qcom,sc8280xp-pdc
           - qcom,sdm845-pdc
+          - qcom,sdx55-pdc
+          - qcom,sdx65-pdc
           - qcom,sm6350-pdc
           - qcom,sm8150-pdc
           - qcom,sm8250-pdc
           - qcom,sm8350-pdc
+          - qcom,sm8450-pdc
       - const: qcom,pdc
 
   reg:
diff --git a/dts/Bindings/interrupt-controller/realtek,rtl-intc.yaml b/dts/Bindings/interrupt-controller/realtek,rtl-intc.yaml
index 13a893b18f..fb55937240 100644
--- a/dts/Bindings/interrupt-controller/realtek,rtl-intc.yaml
+++ b/dts/Bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek RTL SoC interrupt controller devicetree bindings
+title: Realtek RTL SoC interrupt controller
 
 description:
   Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
diff --git a/dts/Bindings/interrupt-controller/renesas,irqc.yaml b/dts/Bindings/interrupt-controller/renesas,irqc.yaml
index 62fd47c882..95033cb514 100644
--- a/dts/Bindings/interrupt-controller/renesas,irqc.yaml
+++ b/dts/Bindings/interrupt-controller/renesas,irqc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/renesas,irqc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller
+title: R-Mobile/R-Car/RZ/G interrupt controller
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
diff --git a/dts/Bindings/iommu/apple,dart.yaml b/dts/Bindings/iommu/apple,dart.yaml
index 82ad669fee..06af2bacbe 100644
--- a/dts/Bindings/iommu/apple,dart.yaml
+++ b/dts/Bindings/iommu/apple,dart.yaml
@@ -22,7 +22,9 @@ description: |+
 
 properties:
   compatible:
-    const: apple,t8103-dart
+    enum:
+      - apple,t8103-dart
+      - apple,t6000-dart
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/iommu/arm,smmu.yaml b/dts/Bindings/iommu/arm,smmu.yaml
index 9066e6df1b..b28c5c2b0f 100644
--- a/dts/Bindings/iommu/arm,smmu.yaml
+++ b/dts/Bindings/iommu/arm,smmu.yaml
@@ -28,19 +28,50 @@ properties:
           - enum:
               - qcom,msm8996-smmu-v2
               - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
           - const: qcom,smmu-v2
 
-      - description: Qcom SoCs implementing "arm,mmu-500"
+      - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
         items:
           - enum:
               - qcom,qcm2290-smmu-500
+              - qcom,qdu1000-smmu-500
               - qcom,sc7180-smmu-500
               - qcom,sc7280-smmu-500
               - qcom,sc8180x-smmu-500
               - qcom,sc8280xp-smmu-500
+              - qcom,sdm670-smmu-500
               - qcom,sdm845-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+          - const: qcom,smmu-500
+          - const: arm,mmu-500
+
+      - description: Qcom SoCs implementing "arm,mmu-500" (non-qcom implementation)
+        deprecated: true
+        items:
+          - enum:
               - qcom,sdx55-smmu-500
               - qcom,sdx65-smmu-500
+          - const: arm,mmu-500
+
+      - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding)
+        deprecated: true
+        items:
+          # Do not add additional SoC to this list. Instead use two previous lists.
+          - enum:
+              - qcom,qcm2290-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sm6115-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm6375-smmu-500
               - qcom,sm8150-smmu-500
@@ -48,13 +79,28 @@ properties:
               - qcom,sm8350-smmu-500
               - qcom,sm8450-smmu-500
           - const: arm,mmu-500
+
+      - description: Qcom Adreno GPUs implementing "arm,smmu-500"
+        items:
+          - enum:
+              - qcom,sc7280-smmu-500
+              - qcom,sm8250-smmu-500
+          - const: qcom,adreno-smmu
+          - const: arm,mmu-500
       - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
         items:
           - enum:
+              - qcom,msm8996-smmu-v2
               - qcom,sc7180-smmu-v2
+              - qcom,sdm630-smmu-v2
               - qcom,sdm845-smmu-v2
+              - qcom,sm6350-smmu-v2
           - const: qcom,adreno-smmu
           - const: qcom,smmu-v2
+      - description: Qcom Adreno GPUs on Google Cheza platform
+        items:
+          - const: qcom,sdm845-smmu-v2
+          - const: qcom,smmu-v2
       - description: Marvell SoCs implementing "arm,mmu-500"
         items:
           - const: marvell,ap806-smmu-500
@@ -147,16 +193,12 @@ properties:
       present in such cases.
 
   clock-names:
-    items:
-      - const: bus
-      - const: iface
+    minItems: 1
+    maxItems: 7
 
   clocks:
-    items:
-      - description: bus clock required for downstream bus access and for the
-          smmu ptw
-      - description: interface clock required to access smmu's registers
-          through the TCU's programming interface.
+    minItems: 1
+    maxItems: 7
 
   power-domains:
     maxItems: 1
@@ -206,6 +248,124 @@ allOf:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
+    then:
+      anyOf:
+        - properties:
+            clock-names:
+              items:
+                - const: bus
+            clocks:
+              items:
+                - description: bus clock required for downstream bus access and for
+                    the smmu ptw
+        - properties:
+            clock-names:
+              items:
+                - const: iface
+                - const: mem
+                - const: mem_iface
+            clocks:
+              items:
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for memory access
+                - description: bus clock required for GPU memory access
+        - properties:
+            clock-names:
+              items:
+                - const: iface-mm
+                - const: iface-smmu
+                - const: bus-mm
+                - const: bus-smmu
+            clocks:
+              items:
+                - description: interface clock required to access mnoc's registers
+                    through the TCU's programming interface.
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for downstream bus access
+                - description: bus clock required for the smmu ptw
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-smmu-v2
+              - qcom,sc7180-smmu-v2
+              - qcom,sdm845-smmu-v2
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: gcc_gpu_memnoc_gfx_clk
+            - const: gcc_gpu_snoc_dvm_gfx_clk
+            - const: gpu_cc_ahb_clk
+            - const: gpu_cc_hlos1_vote_gpu_smmu_clk
+            - const: gpu_cc_cx_gmu_clk
+            - const: gpu_cc_hub_cx_int_clk
+            - const: gpu_cc_hub_aon_clk
+
+        clocks:
+          items:
+            - description: GPU memnoc_gfx clock
+            - description: GPU snoc_dvm_gfx clock
+            - description: GPU ahb clock
+            - description: GPU hlos1_vote_GPU smmu clock
+            - description: GPU cx_gmu clock
+            - description: GPU hub_cx_int clock
+            - description: GPU hub_aon clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-smmu-v2
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahb
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for AHB bus access
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
 examples:
   - |+
     /* SMMU with stream matching or stream indexing */
diff --git a/dts/Bindings/iommu/mediatek,iommu.yaml b/dts/Bindings/iommu/mediatek,iommu.yaml
index 839e3be0bf..5b6395bc10 100644
--- a/dts/Bindings/iommu/mediatek,iommu.yaml
+++ b/dts/Bindings/iommu/mediatek,iommu.yaml
@@ -82,6 +82,7 @@ properties:
           - mediatek,mt8195-iommu-vdo        # generation two
           - mediatek,mt8195-iommu-vpp        # generation two
           - mediatek,mt8195-iommu-infra      # generation two
+          - mediatek,mt8365-m4u  # generation two
 
       - description: mt7623 generation one
         items:
@@ -132,6 +133,7 @@ properties:
       dt-binding/memory/mt8186-memory-port.h for mt8186,
       dt-binding/memory/mt8192-larb-port.h for mt8192.
       dt-binding/memory/mt8195-memory-port.h for mt8195.
+      dt-binding/memory/mediatek,mt8365-larb-port.h for mt8365.
 
   power-domains:
     maxItems: 1
diff --git a/dts/Bindings/iommu/renesas,ipmmu-vmsa.yaml b/dts/Bindings/iommu/renesas,ipmmu-vmsa.yaml
index 8854569ca3..26d0a5121f 100644
--- a/dts/Bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ b/dts/Bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -29,6 +29,7 @@ properties:
               - renesas,ipmmu-r8a7793  # R-Car M2-N
               - renesas,ipmmu-r8a7794  # R-Car E2
           - const: renesas,ipmmu-vmsa  # R-Mobile APE6 or R-Car Gen2 or RZ/G1
+
       - items:
           - enum:
               - renesas,ipmmu-r8a774a1 # RZ/G2M
@@ -43,10 +44,11 @@ properties:
               - renesas,ipmmu-r8a77980 # R-Car V3H
               - renesas,ipmmu-r8a77990 # R-Car E3
               - renesas,ipmmu-r8a77995 # R-Car D3
-              - renesas,ipmmu-r8a779a0 # R-Car V3U
+
       - items:
           - enum:
-              - renesas,ipmmu-r8a779f0 # R-Car S4-8
+              - renesas,ipmmu-r8a779a0           # R-Car V3U
+              - renesas,ipmmu-r8a779f0           # R-Car S4-8
           - const: renesas,rcar-gen4-ipmmu-vmsa  # R-Car Gen4
 
   reg:
diff --git a/dts/Bindings/ipmi/ipmi-ipmb.yaml b/dts/Bindings/ipmi/ipmi-ipmb.yaml
index 71bc031c4f..3f25cdb4e9 100644
--- a/dts/Bindings/ipmi/ipmi-ipmb.yaml
+++ b/dts/Bindings/ipmi/ipmi-ipmb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ipmi/ipmi-ipmb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IPMI IPMB device bindings
+title: IPMI IPMB device
 
 description: IPMI IPMB device bindings
 
diff --git a/dts/Bindings/ipmi/ipmi-smic.yaml b/dts/Bindings/ipmi/ipmi-smic.yaml
index 898e326789..c1b4bf95ef 100644
--- a/dts/Bindings/ipmi/ipmi-smic.yaml
+++ b/dts/Bindings/ipmi/ipmi-smic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IPMI device bindings
+title: IPMI device
 
 description: IPMI device bindings
 
diff --git a/dts/Bindings/ipmi/ssif-bmc.yaml b/dts/Bindings/ipmi/ssif-bmc.yaml
new file mode 100644
index 0000000000..02b662d780
--- /dev/null
+++ b/dts/Bindings/ipmi/ssif-bmc.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ssif-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SSIF IPMI BMC interface
+
+description: SSIF IPMI BMC device bindings
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+properties:
+  compatible:
+    enum:
+      - ssif-bmc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssif-bmc@10 {
+            compatible = "ssif-bmc";
+            reg = <0x10>;
+        };
+    };
diff --git a/dts/Bindings/leds/backlight/gpio-backlight.yaml b/dts/Bindings/leds/backlight/gpio-backlight.yaml
index 3300451fcf..584030b6b0 100644
--- a/dts/Bindings/leds/backlight/gpio-backlight.yaml
+++ b/dts/Bindings/leds/backlight/gpio-backlight.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: gpio-backlight bindings
+title: gpio-backlight
 
 maintainers:
   - Lee Jones <lee@kernel.org>
diff --git a/dts/Bindings/leds/backlight/led-backlight.yaml b/dts/Bindings/leds/backlight/led-backlight.yaml
index 0793d0adc4..d7b78198ab 100644
--- a/dts/Bindings/leds/backlight/led-backlight.yaml
+++ b/dts/Bindings/leds/backlight/led-backlight.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: led-backlight bindings
+title: led-backlight
 
 maintainers:
   - Lee Jones <lee@kernel.org>
diff --git a/dts/Bindings/leds/backlight/pwm-backlight.yaml b/dts/Bindings/leds/backlight/pwm-backlight.yaml
index 78fbe20a17..5ec47a8c65 100644
--- a/dts/Bindings/leds/backlight/pwm-backlight.yaml
+++ b/dts/Bindings/leds/backlight/pwm-backlight.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: pwm-backlight bindings
+title: pwm-backlight
 
 maintainers:
   - Lee Jones <lee@kernel.org>
diff --git a/dts/Bindings/leds/backlight/qcom-wled.yaml b/dts/Bindings/leds/backlight/qcom-wled.yaml
index 4c15693f7a..9acdb78955 100644
--- a/dts/Bindings/leds/backlight/qcom-wled.yaml
+++ b/dts/Bindings/leds/backlight/qcom-wled.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Qualcomm Technologies, Inc. WLED driver
+title: Qualcomm Technologies, Inc. WLED driver
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
diff --git a/dts/Bindings/leds/common.yaml b/dts/Bindings/leds/common.yaml
index 3c14a98430..f5c57a5800 100644
--- a/dts/Bindings/leds/common.yaml
+++ b/dts/Bindings/leds/common.yaml
@@ -100,6 +100,7 @@ properties:
           - pattern
         # LED is triggered by SD/MMC activity
       - pattern: "^mmc[0-9]+$"
+      - pattern: "^cpu[0-9]*$"
 
   led-pattern:
     description: |
diff --git a/dts/Bindings/leds/irled/gpio-ir-tx.txt b/dts/Bindings/leds/irled/gpio-ir-tx.txt
deleted file mode 100644
index cbe8dfd297..0000000000
--- a/dts/Bindings/leds/irled/gpio-ir-tx.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Device tree bindings for IR LED connected through gpio pin which is used as
-remote controller transmitter.
-
-Required properties:
-	- compatible: should be "gpio-ir-tx".
-	- gpios :  Should specify the IR LED GPIO, see "gpios property" in
-	  Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs
-	  should be indicated using flags in the GPIO specifier.
-
-Example:
-	irled@0 {
-		compatible = "gpio-ir-tx";
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/dts/Bindings/leds/irled/gpio-ir-tx.yaml b/dts/Bindings/leds/irled/gpio-ir-tx.yaml
new file mode 100644
index 0000000000..5839d00c70
--- /dev/null
+++ b/dts/Bindings/leds/irled/gpio-ir-tx.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/gpio-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through GPIO pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through GPIO pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    const: gpio-ir-tx
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    irled {
+        compatible = "gpio-ir-tx";
+        gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/dts/Bindings/leds/irled/ir-spi-led.yaml b/dts/Bindings/leds/irled/ir-spi-led.yaml
new file mode 100644
index 0000000000..72cadebf6e
--- /dev/null
+++ b/dts/Bindings/leds/irled/ir-spi-led.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/ir-spi-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through SPI bus
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED switch is connected to the MOSI line of the SPI device and the data
+  is delivered through that.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: ir-spi-led
+
+  reg:
+    maxItems: 1
+
+  duty-cycle:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [50, 60, 70, 75, 80, 90]
+    description:
+      Percentage of one period in which the signal is active.
+
+  led-active-low:
+    type: boolean
+    description:
+      Output is negated with a NOT gate.
+
+  power-supply: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        irled@0 {
+            compatible = "ir-spi-led";
+            reg = <0x0>;
+
+            duty-cycle = /bits/ 8 <60>;
+            led-active-low;
+            power-supply = <&irda_regulator>;
+            spi-max-frequency = <5000000>;
+        };
+    };
+
diff --git a/dts/Bindings/leds/irled/pwm-ir-tx.txt b/dts/Bindings/leds/irled/pwm-ir-tx.txt
deleted file mode 100644
index 66e5672c2e..0000000000
--- a/dts/Bindings/leds/irled/pwm-ir-tx.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Device tree bindings for IR LED connected through pwm pin which is used as
-remote controller transmitter.
-
-Required properties:
-	- compatible: should be "pwm-ir-tx".
-	- pwms : PWM property to point to the PWM device (phandle)/port (id)
-	  and to specify the period time to be used: <&phandle id period_ns>;
-
-Example:
-	irled {
-		compatible = "pwm-ir-tx";
-		pwms = <&pwm0 0 10000000>;
-	};
diff --git a/dts/Bindings/leds/irled/pwm-ir-tx.yaml b/dts/Bindings/leds/irled/pwm-ir-tx.yaml
new file mode 100644
index 0000000000..f2a6fa140f
--- /dev/null
+++ b/dts/Bindings/leds/irled/pwm-ir-tx.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/pwm-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through PWM pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through PWM pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    const: pwm-ir-tx
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    irled {
+        compatible = "pwm-ir-tx";
+        pwms = <&pwm0 0 10000000>;
+    };
diff --git a/dts/Bindings/leds/irled/spi-ir-led.txt b/dts/Bindings/leds/irled/spi-ir-led.txt
deleted file mode 100644
index 83ff1b4d70..0000000000
--- a/dts/Bindings/leds/irled/spi-ir-led.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device tree bindings for IR LED connected through SPI bus which is used as
-remote controller.
-
-The IR LED switch is connected to the MOSI line of the SPI device and the data
-are delivered thourgh that.
-
-Required properties:
-	- compatible: should be "ir-spi-led".
-
-Optional properties:
-	- duty-cycle: 8 bit value that represents the percentage of one period
-	  in which the signal is active.  It can be 50, 60, 70, 75, 80 or 90.
-	- led-active-low: boolean value that specifies whether the output is
-	  negated with a NOT gate.
-	- power-supply: specifies the power source. It can either be a regulator
-	  or a gpio which enables a regulator, i.e. a regulator-fixed as
-	  described in
-	  Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
-
-Example:
-
-	irled@0 {
-		compatible = "ir-spi-led";
-		reg = <0x0>;
-		spi-max-frequency = <5000000>;
-		power-supply = <&vdd_led>;
-		led-active-low;
-		duty-cycle = /bits/ 8 <60>;
-	};
diff --git a/dts/Bindings/leds/issi,is31fl319x.yaml b/dts/Bindings/leds/issi,is31fl319x.yaml
index 940333f2d6..d1b01bae9f 100644
--- a/dts/Bindings/leds/issi,is31fl319x.yaml
+++ b/dts/Bindings/leds/issi,is31fl319x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ISSI LED controllers bindings for IS31FL319{0,1,3,6,9}
+title: ISSI LED Controllers for IS31FL319{0,1,3,6,9}
 
 maintainers:
   - Vincent Knecht <vincent.knecht@mailoo.org>
@@ -57,6 +57,7 @@ patternProperties:
   "^led@[1-9]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
diff --git a/dts/Bindings/leds/leds-aw2013.yaml b/dts/Bindings/leds/leds-aw2013.yaml
index e24b0d15ef..6c3ea0f06c 100644
--- a/dts/Bindings/leds/leds-aw2013.yaml
+++ b/dts/Bindings/leds/leds-aw2013.yaml
@@ -33,6 +33,7 @@ patternProperties:
   "^led@[0-2]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
diff --git a/dts/Bindings/leds/leds-gpio.yaml b/dts/Bindings/leds/leds-gpio.yaml
index 7ad2baeda0..7e11703acb 100644
--- a/dts/Bindings/leds/leds-gpio.yaml
+++ b/dts/Bindings/leds/leds-gpio.yaml
@@ -23,8 +23,8 @@ patternProperties:
   # node name to at least catch some child nodes.
   "(^led-[0-9a-f]$|led)":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       gpios:
diff --git a/dts/Bindings/leds/leds-lgm.yaml b/dts/Bindings/leds/leds-lgm.yaml
index f8d7963c3a..8b3b3bf1ea 100644
--- a/dts/Bindings/leds/leds-lgm.yaml
+++ b/dts/Bindings/leds/leds-lgm.yaml
@@ -56,7 +56,8 @@ properties:
 
     patternProperties:
       "^led@[0-2]$":
-        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
@@ -64,6 +65,9 @@ properties:
             minimum: 0
             maximum: 2
 
+          led-gpios:
+            maxItems: 1
+
           intel,sso-hw-trigger:
             type: boolean
             description: This property indicates Hardware driven/control LED.
@@ -118,14 +122,14 @@ examples:
           reg = <0>;
           function = "gphy";
           color = <LED_COLOR_ID_GREEN>;
-          led-gpio = <&ssogpio 0 0>;
+          led-gpios = <&ssogpio 0 0>;
         };
 
         led@2 {
           reg = <2>;
           function = LED_FUNCTION_POWER;
           color = <LED_COLOR_ID_GREEN>;
-          led-gpio = <&ssogpio 23 0>;
+          led-gpios = <&ssogpio 23 0>;
         };
       };
     };
diff --git a/dts/Bindings/leds/leds-lp50xx.yaml b/dts/Bindings/leds/leds-lp50xx.yaml
index 63da380748..402c254245 100644
--- a/dts/Bindings/leds/leds-lp50xx.yaml
+++ b/dts/Bindings/leds/leds-lp50xx.yaml
@@ -77,6 +77,14 @@ patternProperties:
       "^led@[0-9a-f]+$":
         type: object
         $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
 
 required:
   - compatible
diff --git a/dts/Bindings/leds/leds-lp55xx.yaml b/dts/Bindings/leds/leds-lp55xx.yaml
index 7ec676e538..ae607911f1 100644
--- a/dts/Bindings/leds/leds-lp55xx.yaml
+++ b/dts/Bindings/leds/leds-lp55xx.yaml
@@ -43,11 +43,13 @@ properties:
       - 1 # internal
       - 2 # external
 
-  enable-gpio:
+  enable-gpios:
     maxItems: 1
     description: |
       GPIO attached to the chip's enable pin
 
+  label: true
+
   pwr-sel:
     $ref: /schemas/types.yaml#/definitions/uint8
     description: |
@@ -65,9 +67,50 @@ properties:
     const: 0
 
 patternProperties:
-  "(^led@[0-9a-f]$|led)":
+  '^multi-led@[0-8]$':
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maximum: 8
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-8]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          led-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: |
+              Current setting at each LED channel (mA x10, 0 if LED is not connected)
+            minimum: 0
+            maximum: 255
+
+          max-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: Maximun current at each LED channel.
+
+          reg:
+            maximum: 8
+
+        required:
+          - reg
+
+  "^led@[0-8]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
+
     properties:
       led-cur:
         $ref: /schemas/types.yaml#/definitions/uint8
diff --git a/dts/Bindings/leds/leds-max77650.yaml b/dts/Bindings/leds/leds-max77650.yaml
index c6f96cabd4..fdb08f44a4 100644
--- a/dts/Bindings/leds/leds-max77650.yaml
+++ b/dts/Bindings/leds/leds-max77650.yaml
@@ -30,9 +30,8 @@ properties:
 
 patternProperties:
   "^led@[0-2]$":
-    type: object
-    description: |
-      Properties for a single LED.
+    $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -41,10 +40,6 @@ patternProperties:
         minimum: 0
         maximum: 2
 
-      label: true
-
-      linux,default-trigger: true
-
 required:
   - compatible
   - "#address-cells"
diff --git a/dts/Bindings/leds/leds-mt6360.yaml b/dts/Bindings/leds/leds-mt6360.yaml
index 69e579226d..d84e28e616 100644
--- a/dts/Bindings/leds/leds-mt6360.yaml
+++ b/dts/Bindings/leds/leds-mt6360.yaml
@@ -26,11 +26,10 @@ properties:
     const: 0
 
 patternProperties:
-  "^(multi-)?led@[0-5]$":
+  "^multi-led@[0-5]$":
     type: object
-    $ref: common.yaml#
-    description:
-      Properties for a single LED.
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -43,6 +42,42 @@ patternProperties:
           - 4 # LED output FLASH1
           - 5 # LED output FLASH2
 
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single LED.
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3, 4, 5]
+
 required:
   - compatible
   - "#address-cells"
diff --git a/dts/Bindings/leds/leds-pm8058.txt b/dts/Bindings/leds/leds-pm8058.txt
deleted file mode 100644
index 89584c49aa..0000000000
--- a/dts/Bindings/leds/leds-pm8058.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Qualcomm PM8058 LED driver
-
-The Qualcomm PM8058 is a multi-functional device which contains
-an LED driver block for up to six LEDs: three normal LEDs, two
-"flash" LEDs and one "keypad backlight" LED. The names are
-quoted because sometimes these LED drivers are used for wildly
-different things than flash or keypad backlight: their names
-are more of a suggestion than a hard-wired usecase.
-
-Hardware-wise the different LEDs support slightly different
-output currents. The "flash" LEDs do not need to charge nor
-do they support external triggers. They are just powerful LED
-drivers.
-
-The LEDs appear as children to the PM8058 device, with the
-proper compatible string. For the PM8058 bindings see:
-mfd/qcom-pm8xxx.txt.
-
-Each LED is represented as a sub-node of the syscon device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-
-Required properties:
-- compatible: one of
-  "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
-  "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
-  "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
-
-Optional properties:
-- label: see Documentation/devicetree/bindings/leds/common.txt
-- default-state: see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-qcom,ssbi@500000 {
-	pmicintc: pmic@0 {
-		compatible = "qcom,pm8058";
-		led@48 {
-			compatible = "qcom,pm8058-keypad-led";
-			reg = <0x48>;
-			label = "pm8050:white:keypad";
-			default-state = "off";
-		};
-		led@131 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x131>;
-			label = "pm8058:red";
-			default-state = "off";
-		};
-		led@132 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x132>;
-			label = "pm8058:yellow";
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-		led@133 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x133>;
-			label = "pm8058:green";
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/dts/Bindings/leds/leds-pwm.yaml b/dts/Bindings/leds/leds-pwm.yaml
index fe4d5fd259..7de6da58be 100644
--- a/dts/Bindings/leds/leds-pwm.yaml
+++ b/dts/Bindings/leds/leds-pwm.yaml
@@ -20,8 +20,8 @@ properties:
 patternProperties:
   "^led(-[0-9a-f]+)?$":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       pwms:
diff --git a/dts/Bindings/leds/leds-qcom-lpg.yaml b/dts/Bindings/leds/leds-qcom-lpg.yaml
index 497db28916..1df8377982 100644
--- a/dts/Bindings/leds/leds-qcom-lpg.yaml
+++ b/dts/Bindings/leds/leds-qcom-lpg.yaml
@@ -72,14 +72,24 @@ properties:
       "^led@[0-9a-f]$":
         type: object
         $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
 
 patternProperties:
   "^led@[0-9a-f]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
-      reg: true
+      reg:
+        maxItems: 1
 
     required:
       - reg
diff --git a/dts/Bindings/leds/leds-rt4505.yaml b/dts/Bindings/leds/leds-rt4505.yaml
index 5b0c74aa67..cb71fec173 100644
--- a/dts/Bindings/leds/leds-rt4505.yaml
+++ b/dts/Bindings/leds/leds-rt4505.yaml
@@ -27,6 +27,7 @@ properties:
   led:
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/leds/leds-sgm3140.yaml b/dts/Bindings/leds/leds-sgm3140.yaml
index f682596194..4d2ffe5fcf 100644
--- a/dts/Bindings/leds/leds-sgm3140.yaml
+++ b/dts/Bindings/leds/leds-sgm3140.yaml
@@ -18,7 +18,9 @@ description: |
 
 properties:
   compatible:
-    const: sgmicro,sgm3140
+    enum:
+      - ocs,ocp8110
+      - sgmicro,sgm3140
 
   enable-gpios:
     maxItems: 1
@@ -34,6 +36,7 @@ properties:
   led:
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/leds/qcom,pm8058-led.yaml b/dts/Bindings/leds/qcom,pm8058-led.yaml
new file mode 100644
index 0000000000..fa03e73622
--- /dev/null
+++ b/dts/Bindings/leds/qcom,pm8058-led.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,pm8058-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8058 PMIC LED
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The Qualcomm PM8058 contains an LED block for up to six LEDs:: three normal
+  LEDs, two "flash" LEDs and one "keypad backlight" LED. The names are quoted
+  because sometimes these LED drivers are used for wildly different things than
+  flash or keypad backlight:: their names are more of a suggestion than a
+  hard-wired usecase.
+
+  Hardware-wise the different LEDs support slightly different output currents.
+  The "flash" LEDs do not need to charge nor do they support external triggers.
+  They are just powerful LED drivers.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-led
+      - qcom,pm8058-keypad-led
+      - qcom,pm8058-flash-led
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@131 {
+            compatible = "qcom,pm8058-led";
+            reg = <0x131>;
+            label = "pm8058:red";
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+        };
+    };
diff --git a/dts/Bindings/leds/register-bit-led.yaml b/dts/Bindings/leds/register-bit-led.yaml
index 79b8fc0f9d..ed26ec19ec 100644
--- a/dts/Bindings/leds/register-bit-led.yaml
+++ b/dts/Bindings/leds/register-bit-led.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/register-bit-led.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device Tree Bindings for Register Bit LEDs
+title: Register Bit LEDs
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/dts/Bindings/leds/regulator-led.yaml b/dts/Bindings/leds/regulator-led.yaml
index 3e020d700c..4ef7b96e9a 100644
--- a/dts/Bindings/leds/regulator-led.yaml
+++ b/dts/Bindings/leds/regulator-led.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/regulator-led.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device Tree Bindings for Regulator LEDs
+title: Regulator LEDs
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/dts/Bindings/leds/rohm,bd71828-leds.yaml b/dts/Bindings/leds/rohm,bd71828-leds.yaml
index 86a37c92b8..64b0be9cf7 100644
--- a/dts/Bindings/leds/rohm,bd71828-leds.yaml
+++ b/dts/Bindings/leds/rohm,bd71828-leds.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD71828 Power Management Integrated Circuit LED driver
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   This module is part of the ROHM BD71828 MFD device. For more details
@@ -26,26 +26,16 @@ properties:
 
 patternProperties:
   "^led-[1-2]$":
-    type: object
-    description:
-      Properties for a single LED.
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
     properties:
-      #allOf:
-        #- $ref: "common.yaml#"
       rohm,led-compatible:
         description: LED identification string
         $ref: "/schemas/types.yaml#/definitions/string"
         enum:
           - bd71828-ambled
           - bd71828-grnled
-      function:
-        description:
-          Purpose of LED as defined in dt-bindings/leds/common.h
-        $ref: "/schemas/types.yaml#/definitions/string"
-      color:
-        description:
-          LED colour as defined in dt-bindings/leds/common.h
-        $ref: "/schemas/types.yaml#/definitions/uint32"
 
 required:
   - compatible
diff --git a/dts/Bindings/leds/ti,tca6507.yaml b/dts/Bindings/leds/ti,tca6507.yaml
index 32c6003878..9ce5c0f16e 100644
--- a/dts/Bindings/leds/ti,tca6507.yaml
+++ b/dts/Bindings/leds/ti,tca6507.yaml
@@ -38,8 +38,8 @@ properties:
 patternProperties:
   "^led@[0-6]$":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
diff --git a/dts/Bindings/mailbox/mediatek,gce-mailbox.yaml b/dts/Bindings/mailbox/mediatek,gce-mailbox.yaml
index c579ac074c..d383b2ab3c 100644
--- a/dts/Bindings/mailbox/mediatek,gce-mailbox.yaml
+++ b/dts/Bindings/mailbox/mediatek,gce-mailbox.yaml
@@ -21,6 +21,7 @@ properties:
       - mediatek,mt8173-gce
       - mediatek,mt8183-gce
       - mediatek,mt8186-gce
+      - mediatek,mt8188-gce
       - mediatek,mt8192-gce
       - mediatek,mt8195-gce
 
diff --git a/dts/Bindings/mailbox/qcom,apcs-kpss-global.yaml b/dts/Bindings/mailbox/qcom,apcs-kpss-global.yaml
index f24fd84b4b..943f9472ae 100644
--- a/dts/Bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/dts/Bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm APCS global block bindings
+title: Qualcomm APCS global block
 
 description:
   This binding describes the APCS "global" block found in various Qualcomm
@@ -28,6 +28,7 @@ properties:
               - qcom,sc8180x-apss-shared
               - qcom,sdm660-apcs-hmss-global
               - qcom,sdm845-apss-shared
+              - qcom,sm4250-apcs-hmss-global
               - qcom,sm6125-apcs-hmss-global
               - qcom,sm6115-apcs-hmss-global
               - qcom,sm8150-apss-shared
diff --git a/dts/Bindings/mailbox/qcom-ipcc.yaml b/dts/Bindings/mailbox/qcom-ipcc.yaml
index baca4786ff..f5c73437fe 100644
--- a/dts/Bindings/mailbox/qcom-ipcc.yaml
+++ b/dts/Bindings/mailbox/qcom-ipcc.yaml
@@ -24,12 +24,14 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,sc7280-ipcc
+          - qcom,sc8280xp-ipcc
           - qcom,sm6350-ipcc
           - qcom,sm6375-ipcc
           - qcom,sm8250-ipcc
           - qcom,sm8350-ipcc
           - qcom,sm8450-ipcc
-          - qcom,sc7280-ipcc
+          - qcom,sm8550-ipcc
       - const: qcom,ipcc
 
   reg:
diff --git a/dts/Bindings/mailbox/sprd-mailbox.yaml b/dts/Bindings/mailbox/sprd-mailbox.yaml
index 80feba82cb..bdfb4a8220 100644
--- a/dts/Bindings/mailbox/sprd-mailbox.yaml
+++ b/dts/Bindings/mailbox/sprd-mailbox.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Spreadtrum mailbox controller bindings
+title: Spreadtrum mailbox controller
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/dts/Bindings/mailbox/st,stm32-ipcc.yaml b/dts/Bindings/mailbox/st,stm32-ipcc.yaml
index 2c8b47285a..0dfe05a04d 100644
--- a/dts/Bindings/mailbox/st,stm32-ipcc.yaml
+++ b/dts/Bindings/mailbox/st,stm32-ipcc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 IPC controller bindings
+title: STMicroelectronics STM32 IPC controller
 
 description:
   The IPCC block provides a non blocking signaling mechanism to post and
diff --git a/dts/Bindings/media/allwinner,sun4i-a10-ir.yaml b/dts/Bindings/media/allwinner,sun4i-a10-ir.yaml
index 704033e21e..53945c6132 100644
--- a/dts/Bindings/media/allwinner,sun4i-a10-ir.yaml
+++ b/dts/Bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -21,6 +21,7 @@ properties:
       - const: allwinner,sun6i-a31-ir
       - items:
           - enum:
+              - allwinner,suniv-f1c100s-ir
               - allwinner,sun8i-a83t-ir
               - allwinner,sun8i-r40-ir
               - allwinner,sun50i-a64-ir
diff --git a/dts/Bindings/media/allwinner,sun6i-a31-csi.yaml b/dts/Bindings/media/allwinner,sun6i-a31-csi.yaml
index f1ccca35a7..b3d6db9226 100644
--- a/dts/Bindings/media/allwinner,sun6i-a31-csi.yaml
+++ b/dts/Bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -73,6 +73,10 @@ properties:
         $ref: /schemas/graph.yaml#/properties/port
         description: MIPI CSI-2 bridge input port
 
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Internal output port to the ISP
+
     anyOf:
       - required:
           - port@0
diff --git a/dts/Bindings/media/allwinner,sun6i-a31-isp.yaml b/dts/Bindings/media/allwinner,sun6i-a31-isp.yaml
new file mode 100644
index 0000000000..a61a76bb61
--- /dev/null
+++ b/dts/Bindings/media/allwinner,sun6i-a31-isp.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Image Signal Processor Driver (ISP)
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-isp
+      - allwinner,sun8i-v3s-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: DRAM Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI0 input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI1 input port
+
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-v3s-isp
+    then:
+      required:
+        - port@0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    isp: isp@1cb8000 {
+        compatible = "allwinner,sun8i-v3s-isp";
+        reg = <0x01cb8000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+             <&ccu CLK_CSI1_SCLK>,
+             <&ccu CLK_DRAM_CSI>;
+        clock-names = "bus", "mod", "ram";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                isp_in_csi0: endpoint {
+                    remote-endpoint = <&csi0_out_isp>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/media/atmel,isc.yaml b/dts/Bindings/media/atmel,isc.yaml
index cd6d7af0c7..dc8aba698d 100644
--- a/dts/Bindings/media/atmel,isc.yaml
+++ b/dts/Bindings/media/atmel,isc.yaml
@@ -45,7 +45,7 @@ properties:
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
-    unevaluatedProperties: false
+    additionalProperties: false
     description:
       Input port node, single endpoint describing the input pad.
 
@@ -77,8 +77,6 @@ properties:
 
         additionalProperties: false
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/media/i2c/dongwoon,dw9768.yaml b/dts/Bindings/media/i2c/dongwoon,dw9768.yaml
index 21864ab86e..82d3d18c16 100644
--- a/dts/Bindings/media/i2c/dongwoon,dw9768.yaml
+++ b/dts/Bindings/media/i2c/dongwoon,dw9768.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9768.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens Device Tree Bindings
+title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens
 
 maintainers:
   - Dongchun Zhu <dongchun.zhu@mediatek.com>
diff --git a/dts/Bindings/media/i2c/imx290.txt b/dts/Bindings/media/i2c/imx290.txt
deleted file mode 100644
index a3cc21410f..0000000000
--- a/dts/Bindings/media/i2c/imx290.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Sony IMX290 1/2.8-Inch CMOS Image Sensor
-
-The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
-Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
-interfaces. The sensor output is available via CMOS logic parallel SDR output,
-Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
-default. No bindings have been defined for the other busses.
-
-Required Properties:
-- compatible: Should be "sony,imx290"
-- reg: I2C bus address of the device
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock in Hz.
-- vdddo-supply: Sensor digital IO regulator.
-- vdda-supply: Sensor analog regulator.
-- vddd-supply: Sensor digital core regulator.
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-
-The imx290 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Required Properties on endpoint:
-- data-lanes: check ../video-interfaces.txt
-- link-frequencies: check ../video-interfaces.txt
-- remote-endpoint: check ../video-interfaces.txt
-
-Example:
-	&i2c1 {
-		...
-		imx290: camera-sensor@1a {
-			compatible = "sony,imx290";
-			reg = <0x1a>;
-
-			reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_rear_default>;
-
-			clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
-			clock-names = "xclk";
-			clock-frequency = <37125000>;
-
-			vdddo-supply = <&camera_vdddo_1v8>;
-			vdda-supply = <&camera_vdda_2v8>;
-			vddd-supply = <&camera_vddd_1v5>;
-
-			port {
-				imx290_ep: endpoint {
-					data-lanes = <1 2 3 4>;
-					link-frequencies = /bits/ 64 <445500000>;
-					remote-endpoint = <&csiphy0_ep>;
-				};
-			};
-		};
diff --git a/dts/Bindings/media/i2c/mipi-ccs.yaml b/dts/Bindings/media/i2c/mipi-ccs.yaml
index 39395ea8c3..edde420111 100644
--- a/dts/Bindings/media/i2c/mipi-ccs.yaml
+++ b/dts/Bindings/media/i2c/mipi-ccs.yaml
@@ -104,6 +104,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     i2c2 {
         #address-cells = <1>;
@@ -124,7 +125,7 @@ examples:
                     remote-endpoint = <&csi2a_ep>;
                     link-frequencies = /bits/ 64 <199200000 210000000
                                                   499200000>;
-                    bus-type = <4>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
                 };
             };
         };
diff --git a/dts/Bindings/media/i2c/ov5645.txt b/dts/Bindings/media/i2c/ov5645.txt
deleted file mode 100644
index 72ad992f77..0000000000
--- a/dts/Bindings/media/i2c/ov5645.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
-
-The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a serial I2C
-interface.
-
-Required Properties:
-- compatible: Value should be "ovti,ov5645".
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
-  to the hardware pin PWDNB which is physically active low.
-- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
-  the hardware pin RESETB.
-- vdddo-supply: Chip digital IO regulator.
-- vdda-supply: Chip analog regulator.
-- vddd-supply: Chip digital core regulator.
-
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	&i2c1 {
-		...
-
-		ov5645: ov5645@3c {
-			compatible = "ovti,ov5645";
-			reg = <0x3c>;
-
-			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_rear_default>;
-
-			clocks = <&clks 200>;
-			clock-names = "xclk";
-			clock-frequency = <24000000>;
-
-			vdddo-supply = <&camera_dovdd_1v8>;
-			vdda-supply = <&camera_avdd_2v8>;
-			vddd-supply = <&camera_dvdd_1v2>;
-
-			port {
-				ov5645_ep: endpoint {
-					clock-lanes = <1>;
-					data-lanes = <0 2>;
-					remote-endpoint = <&csi0_ep>;
-				};
-			};
-		};
-	};
diff --git a/dts/Bindings/media/i2c/ov8856.yaml b/dts/Bindings/media/i2c/ov8856.yaml
index baf92aaaf0..e17288d579 100644
--- a/dts/Bindings/media/i2c/ov8856.yaml
+++ b/dts/Bindings/media/i2c/ov8856.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+title: Omnivision OV8856 CMOS Sensor
 
 maintainers:
   - Dongchun Zhu <dongchun.zhu@mediatek.com>
diff --git a/dts/Bindings/media/i2c/ovti,ov02a10.yaml b/dts/Bindings/media/i2c/ovti,ov02a10.yaml
index 63a040944f..54df9d73dc 100644
--- a/dts/Bindings/media/i2c/ovti,ov02a10.yaml
+++ b/dts/Bindings/media/i2c/ovti,ov02a10.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
+title: Omnivision OV02A10 CMOS Sensor
 
 maintainers:
   - Dongchun Zhu <dongchun.zhu@mediatek.com>
diff --git a/dts/Bindings/media/i2c/ovti,ov4689.yaml b/dts/Bindings/media/i2c/ovti,ov4689.yaml
new file mode 100644
index 0000000000..50579c947f
--- /dev/null
+++ b/dts/Bindings/media/i2c/ovti,ov4689.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV4689 CMOS
+
+maintainers:
+  - Mikhail Rudenko <mike.rudenko@gmail.com>
+
+description: |
+  The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
+  image sensor. Ihis chip supports high frame rate speeds up to 90 fps
+  at 2688x1520 resolution. It is programmable through an I2C
+  interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
+  connection.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov4689
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      External clock (XVCLK) for the sensor, 6-64 MHz
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.7-3.0 V
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.6-3.0 V
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.1-1.3 V
+
+  powerdown-gpios:
+    description:
+      GPIO connected to the powerdown pin (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the reset pin (active low)
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov4689: camera@36 {
+            compatible = "ovti,ov4689";
+            reg = <0x36>;
+
+            clocks = <&ov4689_clk>;
+
+            avdd-supply = <&ov4689_avdd>;
+            dovdd-supply = <&ov4689_dovdd>;
+            dvdd-supply = <&ov4689_dvdd>;
+
+            powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <504000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/media/i2c/ovti,ov5640.yaml b/dts/Bindings/media/i2c/ovti,ov5640.yaml
index 540fd69ac3..a621032f9b 100644
--- a/dts/Bindings/media/i2c/ovti,ov5640.yaml
+++ b/dts/Bindings/media/i2c/ovti,ov5640.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV5640 Image Sensor Device Tree Bindings
+title: OmniVision OV5640 Image Sensor
 
 maintainers:
   - Steve Longerbeam <slongerbeam@gmail.com>
diff --git a/dts/Bindings/media/i2c/ovti,ov5645.yaml b/dts/Bindings/media/i2c/ovti,ov5645.yaml
new file mode 100644
index 0000000000..bc9b27afe3
--- /dev/null
+++ b/dts/Bindings/media/i2c/ovti,ov5645.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5645.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5645 Image Sensor
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+properties:
+  compatible:
+    const: ovti,ov5645
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+
+  vdda-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.5 volts
+
+  vdddo-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the PWDNB pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESETB pin, if any.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdddo-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "ovti,ov5645";
+            reg = <0x3c>;
+            clocks = <&clks 1>;
+            clock-frequency = <24000000>;
+            vdddo-supply = <&ov5645_vdddo_1v8>;
+            vdda-supply = <&ov5645_vdda_2v8>;
+            vddd-supply = <&ov5645_vddd_1v5>;
+            enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_ov5645>;
+
+            port {
+                ov5645_ep: endpoint {
+                    remote-endpoint = <&csi0_ep>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/media/i2c/ovti,ov5648.yaml b/dts/Bindings/media/i2c/ovti,ov5648.yaml
index 246dc5fec7..61e4e9cf87 100644
--- a/dts/Bindings/media/i2c/ovti,ov5648.yaml
+++ b/dts/Bindings/media/i2c/ovti,ov5648.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov5648.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV5648 Image Sensor Device Tree Bindings
+title: OmniVision OV5648 Image Sensor
 
 maintainers:
   - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
diff --git a/dts/Bindings/media/i2c/ovti,ov772x.yaml b/dts/Bindings/media/i2c/ovti,ov772x.yaml
index 44529425ce..161e6d598e 100644
--- a/dts/Bindings/media/i2c/ovti,ov772x.yaml
+++ b/dts/Bindings/media/i2c/ovti,ov772x.yaml
@@ -105,6 +105,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     i2c0 {
         #address-cells = <1>;
@@ -118,7 +119,7 @@ examples:
 
             port {
                 ov772x_0: endpoint {
-                    bus-type = <5>;
+                    bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                     vsync-active = <0>;
                     hsync-active = <0>;
                     pclk-sample = <0>;
diff --git a/dts/Bindings/media/i2c/ovti,ov8865.yaml b/dts/Bindings/media/i2c/ovti,ov8865.yaml
index b962863e4f..6bac326dce 100644
--- a/dts/Bindings/media/i2c/ovti,ov8865.yaml
+++ b/dts/Bindings/media/i2c/ovti,ov8865.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV8865 Image Sensor Device Tree Bindings
+title: OmniVision OV8865 Image Sensor
 
 maintainers:
   - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
diff --git a/dts/Bindings/media/i2c/ovti,ov9282.yaml b/dts/Bindings/media/i2c/ovti,ov9282.yaml
index bf115ab9d9..0c4654e70d 100644
--- a/dts/Bindings/media/i2c/ovti,ov9282.yaml
+++ b/dts/Bindings/media/i2c/ovti,ov9282.yaml
@@ -16,10 +16,13 @@ description:
   sensor with an active array size of 1296H x 816V. It is programmable through
   I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data
   sheet. Image data is sent through MIPI CSI-2.
+  OV9281 has a different lens chief ray angle.
 
 properties:
   compatible:
-    const: ovti,ov9282
+    enum:
+      - ovti,ov9281
+      - ovti,ov9282
   reg:
     description: I2C address
     maxItems: 1
@@ -36,6 +39,15 @@ properties:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
 
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
   port:
     additionalProperties: false
     $ref: /schemas/graph.yaml#/$defs/port-base
diff --git a/dts/Bindings/media/i2c/sony,imx290.yaml b/dts/Bindings/media/i2c/sony,imx290.yaml
new file mode 100644
index 0000000000..21377daae0
--- /dev/null
+++ b/dts/Bindings/media/i2c/sony,imx290.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX290 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
+  Pixel for Color Cameras. It is programmable through I2C and 4-wire
+  interfaces. The sensor output is available via CMOS logic parallel SDR
+  output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2
+  bus is the default. No bindings have been defined for the other busses.
+
+properties:
+  compatible:
+    enum:
+      - sony,imx290
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: Input clock (37.125 MHz or 74.25 MHz)
+    items:
+      - const: xclk
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz
+
+  vdda-supply:
+    description: Analog power supply (2.9V)
+
+  vddd-supply:
+    description: Digital core power supply (1.2V)
+
+  vdddo-supply:
+    description: Digital I/O power supply (1.8V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - vdda-supply
+  - vddd-supply
+  - vdddo-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx290: camera-sensor@1a {
+            compatible = "sony,imx290";
+            reg = <0x1a>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&camera_rear_default>;
+
+            clocks = <&gcc 90>;
+            clock-names = "xclk";
+            clock-frequency = <37125000>;
+
+            vdddo-supply = <&camera_vdddo_1v8>;
+            vdda-supply = <&camera_vdda_2v8>;
+            vddd-supply = <&camera_vddd_1v5>;
+
+            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx290_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <445500000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/media/i2c/sony,imx412.yaml b/dts/Bindings/media/i2c/sony,imx412.yaml
index 26d1807d0b..60dc25ff2b 100644
--- a/dts/Bindings/media/i2c/sony,imx412.yaml
+++ b/dts/Bindings/media/i2c/sony,imx412.yaml
@@ -19,7 +19,9 @@ description:
 
 properties:
   compatible:
-    const: sony,imx412
+    enum:
+      - sony,imx412
+      - sony,imx577
   reg:
     description: I2C address
     maxItems: 1
diff --git a/dts/Bindings/media/i2c/st,st-mipid02.txt b/dts/Bindings/media/i2c/st,st-mipid02.txt
deleted file mode 100644
index 7976e6c40a..0000000000
--- a/dts/Bindings/media/i2c/st,st-mipid02.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
-
-MIPID02 has two CSI-2 input ports, only one of those ports can be active at a
-time. Active port input stream will be de-serialized and its content outputted
-through PARALLEL output port.
-CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 second
-input port is a single lane 800Mbps. Both ports support clock and data lane
-polarity swap. First port also supports data lane swap.
-PARALLEL output port has a maximum width of 12 bits.
-Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, RGB444,
-YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
-
-Required Properties:
-- compatible: shall be "st,st-mipid02"
-- clocks: reference to the xclk input clock.
-- clock-names: shall be "xclk".
-- VDDE-supply: sensor digital IO supply. Must be 1.8 volts.
-- VDDIN-supply: sensor internal regulator supply. Must be 1.8 volts.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the xsdn pin, if any.
-	       This is an active low signal to the mipid02.
-
-Required subnodes:
-  - ports: A ports node with one port child node per device input and output
-	   port, in accordance with the video interface bindings defined in
-	   Documentation/devicetree/bindings/media/video-interfaces.txt. The
-	   port nodes are numbered as follows:
-
-	   Port Description
-	   -----------------------------
-	   0    CSI-2 first input port
-	   1    CSI-2 second input port
-	   2    PARALLEL output
-
-Endpoint node required property for CSI-2 connection is:
-- data-lanes: shall be <1> for Port 1. for Port 0 dual-lane operation shall be
-<1 2> or <2 1>. For Port 0 single-lane operation shall be <1> or <2>.
-Endpoint node optional property for CSI-2 connection is:
-- lane-polarities: any lane can be inverted or not.
-
-Endpoint node required property for PARALLEL connection is:
-- bus-width: shall be set to <6>, <7>, <8>, <10> or <12>.
-Endpoint node optional properties for PARALLEL connection are:
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-
-Example:
-
-mipid02: csi2rx@14 {
-	compatible = "st,st-mipid02";
-	reg = <0x14>;
-	status = "okay";
-	clocks = <&clk_ext_camera_12>;
-	clock-names = "xclk";
-	VDDE-supply = <&vdd>;
-	VDDIN-supply = <&vdd>;
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-
-			ep0: endpoint {
-				data-lanes = <1 2>;
-				remote-endpoint = <&mipi_csi2_in>;
-			};
-		};
-		port@2 {
-			reg = <2>;
-
-			ep2: endpoint {
-				bus-width = <8>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				remote-endpoint = <&parallel_out>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/media/i2c/st,st-mipid02.yaml b/dts/Bindings/media/i2c/st,st-mipid02.yaml
new file mode 100644
index 0000000000..19a39d753a
--- /dev/null
+++ b/dts/Bindings/media/i2c/st,st-mipid02.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-mipid02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description:
+  MIPID02 has two CSI-2 input ports, only one of those ports can be
+  active at a time. Active port input stream will be de-serialized
+  and its content outputted through PARALLEL output port.
+  CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2
+  second input port is a single lane 800Mbps. Both ports support clock
+  and data lane polarity swap. First port also supports data lane swap.
+  PARALLEL output port has a maximum width of 12 bits.
+  Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888,
+  RGB444, YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
+
+properties:
+  compatible:
+    const: st,st-mipid02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xclk
+
+  VDDE-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VDDIN-supply:
+    description:
+      Sensor internal regulator supply. Must be 1.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the xsdn pin, if any.
+      This is an active low signal to the mipid02.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 first input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                  Dual-lane operation shall be <1 2> or <2 1> .
+                minItems: 1
+                maxItems: 2
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 second input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                maxItems: 1
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                maxItems: 1
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                enum: [6, 7, 8, 10, 12]
+
+            required:
+              - bus-width
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+    required:
+      - port@2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VDDE-supply
+  - VDDIN-supply
+  - ports
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        mipid02: csi2rx@14 {
+            compatible = "st,st-mipid02";
+            reg = <0x14>;
+            status = "okay";
+            clocks = <&clk_ext_camera_12>;
+            clock-names = "xclk";
+            VDDE-supply = <&vdd>;
+            VDDIN-supply = <&vdd>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+
+                    ep0: endpoint {
+                        data-lanes = <1 2>;
+                        remote-endpoint = <&mipi_csi2_in>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+
+                    ep2: endpoint {
+                        bus-width = <8>;
+                        hsync-active = <0>;
+                        vsync-active = <0>;
+                        remote-endpoint = <&parallel_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/media/i2c/st,st-vgxy61.yaml b/dts/Bindings/media/i2c/st,st-vgxy61.yaml
new file mode 100644
index 0000000000..8c28848b22
--- /dev/null
+++ b/dts/Bindings/media/i2c/st,st-vgxy61.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2022 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
+  quad lanes 800Mbps per lane.
+  Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
+  Following part number are supported
+  - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
+  Maximum frame rate is 75 fps.
+  - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
+  Maximum frame rate is 60 fps.
+
+properties:
+  compatible:
+    const: st,st-vgxy61
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VCORE-supply:
+    description:
+      Sensor digital core supply. Must be 1.2 volts.
+
+  VDDIO-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VANA-supply:
+    description:
+      Sensor analog supply. Must be 2.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the reset pin, if any.
+      This is an active low signal to the vgxy61.
+
+  st,strobe-gpios-polarity:
+    description:
+      Invert polarity of illuminator's lights strobe GPIOs.
+      These GPIOs directly drive the illuminator LEDs.
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description:
+              CSI lanes to use
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - clocks
+  - VCORE-supply
+  - VDDIO-supply
+  - VANA-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vgxy61: csi2tx@10 {
+            compatible = "st,st-vgxy61";
+            reg = <0x10>;
+            clocks = <&clk_ext_camera>;
+            VCORE-supply = <&v1v2>;
+            VDDIO-supply = <&v1v8>;
+            VANA-supply = <&v2v8>;
+            reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
+            port {
+                ep0: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&mipi_csi2_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/media/i2c/toshiba,tc358746.yaml b/dts/Bindings/media/i2c/toshiba,tc358746.yaml
new file mode 100644
index 0000000000..b8ba85a241
--- /dev/null
+++ b/dts/Bindings/media/i2c/toshiba,tc358746.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/toshiba,tc358746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358746 Parallel to MIPI CSI2 Bridge
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |-
+  The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2
+  stream. The direction can be either parallel-in -> csi-out or csi-in ->
+  parallel-out The chip is programmable trough I2C and SPI but the SPI
+  interface is only supported in parallel-in -> csi-out mode.
+
+  Note that the current device tree bindings only support the
+  parallel-in -> csi-out path.
+
+properties:
+  compatible:
+    const: toshiba,tc358746
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      The phandle to the reference clock source. This corresponds to the
+      hardware pin REFCLK.
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  "#clock-cells":
+    description: |
+      The bridge can act as clock provider for the sensor. To enable this
+      support #clock-cells must be specified. Attention if this feature is used
+      then the mclk rate must be at least: (2 * link-frequency) / 8
+                                           `------------------´   ^
+                                           internal PLL rate   smallest possible
+                                                                   mclk-div
+    const: 0
+
+  clock-output-names:
+    description:
+      The clock name of the MCLK output, the default name is tc358746-mclk.
+    maxItems: 1
+
+  vddc-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  vddio-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  vddmipi-supply:
+    description: MIPI CSI phy voltage supply, 1.2 volts
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls the chip reset.
+      This corresponds to the hardware pin RESX which is physically active low.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-type:
+                enum: [ 5, 6 ]
+
+            required:
+              - hsync-active
+              - vsync-active
+              - bus-type
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              clock-noncontinuous: true
+              link-frequencies: true
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vddc-supply
+  - vddio-supply
+  - vddmipi-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      csi-bridge@e {
+        compatible = "toshiba,tc358746";
+        reg = <0xe>;
+
+        clocks = <&refclk>;
+        clock-names = "refclk";
+
+        reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+
+        vddc-supply = <&v1_2d>;
+        vddio-supply = <&v1_8d>;
+        vddmipi-supply = <&v1_2d>;
+
+        /* sensor mclk provider */
+        #clock-cells = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Input */
+          port@0 {
+            reg = <0>;
+            tc358746_in: endpoint {
+              remote-endpoint = <&sensor_out>;
+              hsync-active = <0>;
+              vsync-active = <0>;
+              bus-type = <5>;
+            };
+          };
+
+          /* Output */
+          port@1 {
+            reg = <1>;
+            tc358746_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+              clock-noncontinuous;
+              link-frequencies = /bits/ 64 <216000000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/dts/Bindings/media/marvell,mmp2-ccic.yaml b/dts/Bindings/media/marvell,mmp2-ccic.yaml
index b39b84c5f0..de3e483f14 100644
--- a/dts/Bindings/media/marvell,mmp2-ccic.yaml
+++ b/dts/Bindings/media/marvell,mmp2-ccic.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP2 camera host interface bindings
+title: Marvell MMP2 camera host interface
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
@@ -68,6 +68,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/power/marvell,mmp2.h>
 
     camera@d420a000 {
@@ -83,7 +84,7 @@ examples:
       port {
         camera0_0: endpoint {
           remote-endpoint = <&ov7670_0>;
-          bus-type = <5>;      /* Parallel */
+          bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
           hsync-active = <1>;  /* Active high */
           vsync-active = <1>;  /* Active high */
           pclk-sample = <0>;   /* Falling */
diff --git a/dts/Bindings/media/mediatek,mt8195-jpegdec.yaml b/dts/Bindings/media/mediatek,mt8195-jpegdec.yaml
new file mode 100644
index 0000000000..71595c013d
--- /dev/null
+++ b/dts/Bindings/media/mediatek,mt8195-jpegdec.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Decoder is the JPEG decode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 6
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgdec@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg decoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgdec-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgdec
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - dma-ranges
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgdec-master {
+            compatible = "mediatek,mt8195-jpgdec";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            iommus = <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+            dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgdec@1a040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+            };
+
+            jpgdec@1a050000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC_C1>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            };
+
+            jpgdec@1b040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/dts/Bindings/media/mediatek,mt8195-jpegenc.yaml b/dts/Bindings/media/mediatek,mt8195-jpegenc.yaml
new file mode 100644
index 0000000000..95990539f7
--- /dev/null
+++ b/dts/Bindings/media/mediatek,mt8195-jpegenc.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgenc@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg encoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgenc-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgenc
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - dma-ranges
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgenc-master {
+            compatible = "mediatek,mt8195-jpgenc";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+            dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgenc@1a030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1a030000 0 0x10000>;
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+            };
+
+            jpgenc@1b030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1b030000 0 0x10000>;
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            };
+        };
+    };
diff --git a/dts/Bindings/media/mediatek,vcodec-encoder.yaml b/dts/Bindings/media/mediatek,vcodec-encoder.yaml
index 32aee09aea..0f2ea8d9a1 100644
--- a/dts/Bindings/media/mediatek,vcodec-encoder.yaml
+++ b/dts/Bindings/media/mediatek,vcodec-encoder.yaml
@@ -67,6 +67,12 @@ properties:
   power-domains:
     maxItems: 1
 
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
 required:
   - compatible
   - reg
@@ -84,7 +90,9 @@ allOf:
           contains:
             enum:
               - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
               - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
 
     then:
       required:
@@ -107,7 +115,9 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8173-vcodec-enc
+            - mediatek,mt8188-vcodec-enc
             - mediatek,mt8192-vcodec-enc
+            - mediatek,mt8195-vcodec-enc
 
     then:
       properties:
@@ -118,7 +128,7 @@ allOf:
         clock-names:
           items:
             - const: venc_sel
-    else:  # for vp8 hw decoder
+    else:  # for vp8 hw encoder
       properties:
         clock:
           items:
diff --git a/dts/Bindings/media/mediatek-jpeg-decoder.yaml b/dts/Bindings/media/mediatek-jpeg-decoder.yaml
index 5e8d001492..cfabf360f2 100644
--- a/dts/Bindings/media/mediatek-jpeg-decoder.yaml
+++ b/dts/Bindings/media/mediatek-jpeg-decoder.yaml
@@ -22,6 +22,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt7623-jpgdec
+              - mediatek,mt8188-jpgdec
           - const: mediatek,mt2701-jpgdec
 
   reg:
diff --git a/dts/Bindings/media/mediatek-jpeg-encoder.yaml b/dts/Bindings/media/mediatek-jpeg-encoder.yaml
index fc727300b4..c8412e8ab3 100644
--- a/dts/Bindings/media/mediatek-jpeg-encoder.yaml
+++ b/dts/Bindings/media/mediatek-jpeg-encoder.yaml
@@ -19,6 +19,7 @@ properties:
           - mediatek,mt2701-jpgenc
           - mediatek,mt8183-jpgenc
           - mediatek,mt8186-jpgenc
+          - mediatek,mt8188-jpgenc
       - const: mediatek,mtk-jpgenc
   reg:
     maxItems: 1
diff --git a/dts/Bindings/media/microchip,xisc.yaml b/dts/Bindings/media/microchip,xisc.yaml
index 8b37fccab5..25f5f79d40 100644
--- a/dts/Bindings/media/microchip,xisc.yaml
+++ b/dts/Bindings/media/microchip,xisc.yaml
@@ -106,6 +106,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/at91.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     xisc: xisc@e1408000 {
         compatible = "microchip,sama7g5-isc";
@@ -118,7 +119,7 @@ examples:
 
         port {
                 xisc_in: endpoint {
-                       bus-type = <5>; /* Parallel */
+                       bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                        remote-endpoint = <&csi2dc_out>;
                        hsync-active = <1>;
                        vsync-active = <1>;
diff --git a/dts/Bindings/media/renesas,ceu.yaml b/dts/Bindings/media/renesas,ceu.yaml
index 50e0740af1..d527fc42c3 100644
--- a/dts/Bindings/media/renesas,ceu.yaml
+++ b/dts/Bindings/media/renesas,ceu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/renesas,ceu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas Capture Engine Unit (CEU) Bindings
+title: Renesas Capture Engine Unit (CEU)
 
 maintainers:
   - Jacopo Mondi <jacopo+renesas@jmondi.org>
diff --git a/dts/Bindings/media/renesas,rzg2l-cru.yaml b/dts/Bindings/media/renesas,rzg2l-cru.yaml
new file mode 100644
index 0000000000..7dde7967c8
--- /dev/null
+++ b/dts/Bindings/media/renesas,rzg2l-cru.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CRU image processing module is a data conversion module equipped with pixel
+  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
+  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-cru       # RZ/G2{L,LC}
+          - renesas,r9a07g054-cru       # RZ/V2L
+      - const: renesas,rzg2l-cru
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: image_conv
+      - const: image_conv_err
+      - const: axi_mst_err
+
+  clocks:
+    items:
+      - description: CRU Main clock
+      - description: CRU Register access clock
+      - description: CRU image transfer clock
+
+  clock-names:
+    items:
+      - const: video
+      - const: apb
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_ARESETN reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: aresetn
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-width: true
+              data-shift: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, describing the Image Processing module connected to the
+          CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example with CSI-2
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cru: video@10830000 {
+        compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+        reg = <0x10830000 0x400>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+        clock-names = "video", "apb", "axi";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_ARESETN>;
+        reset-names = "presetn", "aresetn";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                cru_parallel_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint= <&ov5642>;
+                    hsync-active = <1>;
+                    vsync-active = <1>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                cru_csi_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint= <&csi_cru_in>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/media/renesas,rzg2l-csi2.yaml b/dts/Bindings/media/renesas,rzg2l-csi2.yaml
new file mode 100644
index 0000000000..67eea2ac1d
--- /dev/null
+++ b/dts/Bindings/media/renesas,rzg2l-csi2.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
+  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
+  with the Image Processing module, which provides the video capture capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
+          - renesas,r9a07g054-csi2       # RZ/V2L
+      - const: renesas,rzg2l-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Internal clock for connecting CRU and MIPI
+      - description: CRU Main clock
+      - description: CRU Register access clock
+
+  clock-names:
+    items:
+      - const: system
+      - const: video
+      - const: apb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_CMN_RSTB reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: cmn-rstb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node, Image Processing block connected to the CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csi: csi@10830400 {
+        compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+        reg = <0x10830400 0xfc00>;
+        interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+        clock-names = "system", "video", "apb";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_CMN_RSTB>;
+        reset-names = "presetn", "cmn-rstb";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                csi2_in: endpoint {
+                    clock-lanes = <0>;
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&ov5645_ep>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                reg = <1>;
+
+                csi2cru: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&crucsi2>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/media/s5p-mfc.txt b/dts/Bindings/media/s5p-mfc.txt
index aa54c8159d..8eb90c043d 100644
--- a/dts/Bindings/media/s5p-mfc.txt
+++ b/dts/Bindings/media/s5p-mfc.txt
@@ -10,10 +10,12 @@ Required properties:
   - compatible : value should be either one among the following
 	(a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
 	(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
-	(c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
-	(d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
-	(e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
-	(f) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
+	(c) "samsung,exynos3250-mfc", "samsung,mfc-v7" for MFC v7
+	     present in Exynos3250 SoC
+	(d) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
+	(e) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
+	(f) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
+	(g) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
 
   - reg : Physical base address of the IP registers and length of memory
 	  mapped region.
diff --git a/dts/Bindings/media/samsung-s5c73m3.txt b/dts/Bindings/media/samsung-s5c73m3.txt
index 21f31fdf55..f0ea9adad4 100644
--- a/dts/Bindings/media/samsung-s5c73m3.txt
+++ b/dts/Bindings/media/samsung-s5c73m3.txt
@@ -76,7 +76,7 @@ i2c@138a000000 {
 		clock-frequency = <24000000>;
 		clocks = <&clk 0>;
 		clock-names = "cis_extclk";
-		reset-gpios = <&gpf1 3 1>;
+		xshutdown-gpios = <&gpf1 3 1>;
 		standby-gpios = <&gpm0 1 1>;
 		port {
 			s5c73m3_ep: endpoint {
diff --git a/dts/Bindings/media/st,stm32-cec.yaml b/dts/Bindings/media/st,stm32-cec.yaml
index 77144cc6f7..7f545a587a 100644
--- a/dts/Bindings/media/st,stm32-cec.yaml
+++ b/dts/Bindings/media/st,stm32-cec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/st,stm32-cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CEC bindings
+title: STMicroelectronics STM32 CEC
 
 maintainers:
   - Yannick Fertre <yannick.fertre@foss.st.com>
diff --git a/dts/Bindings/media/st,stm32-dcmi.yaml b/dts/Bindings/media/st,stm32-dcmi.yaml
index 9c1262a276..6b3e413ced 100644
--- a/dts/Bindings/media/st,stm32-dcmi.yaml
+++ b/dts/Bindings/media/st,stm32-dcmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
+title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI)
 
 maintainers:
   - Hugues Fruchet <hugues.fruchet@foss.st.com>
@@ -90,7 +90,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
+
     dcmi: dcmi@4c006000 {
         compatible = "st,stm32-dcmi";
         reg = <0x4c006000 0x400>;
@@ -104,7 +106,7 @@ examples:
         port {
              dcmi_0: endpoint {
                    remote-endpoint = <&ov5640_0>;
-                   bus-type = <5>;
+                   bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                    bus-width = <8>;
                    hsync-active = <0>;
                    vsync-active = <0>;
diff --git a/dts/Bindings/media/st,stm32-dma2d.yaml b/dts/Bindings/media/st,stm32-dma2d.yaml
index f97b4a2466..4afa4a24b8 100644
--- a/dts/Bindings/media/st,stm32-dma2d.yaml
+++ b/dts/Bindings/media/st,stm32-dma2d.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/st,stm32-dma2d.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D binding
+title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D
 
 description:
   Chrom-ART Accelerator(DMA2D), graphical hardware accelerator
diff --git a/dts/Bindings/media/video-interface-devices.yaml b/dts/Bindings/media/video-interface-devices.yaml
index 4527f56a5a..cf7712ad29 100644
--- a/dts/Bindings/media/video-interface-devices.yaml
+++ b/dts/Bindings/media/video-interface-devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common bindings for video receiver and transmitter devices
+title: Common Properties for Video Receiver and Transmitter Devices
 
 maintainers:
   - Jacopo Mondi <jacopo@jmondi.org>
diff --git a/dts/Bindings/media/video-interfaces.yaml b/dts/Bindings/media/video-interfaces.yaml
index 68c3b9871c..a211d49dc2 100644
--- a/dts/Bindings/media/video-interfaces.yaml
+++ b/dts/Bindings/media/video-interfaces.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/video-interfaces.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common bindings for video receiver and transmitter interface endpoints
+title: Common Properties for Video Receiver and Transmitter Interface Endpoints
 
 maintainers:
   - Sakari Ailus <sakari.ailus@linux.intel.com>
@@ -145,9 +145,10 @@ properties:
 
   pclk-sample:
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 0, 1 ]
+    enum: [ 0, 1, 2 ]
     description:
-      Sample data on rising (1) or falling (0) edge of the pixel clock signal.
+      Sample data on falling (0), rising (1) or both (2) edges of the pixel
+      clock signal.
 
   sync-on-green-active:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/dts/Bindings/memory-controllers/arm,pl353-smc.yaml b/dts/Bindings/memory-controllers/arm,pl35x-smc.yaml
index 01c9acf927..bd23257fe0 100644
--- a/dts/Bindings/memory-controllers/arm,pl353-smc.yaml
+++ b/dts/Bindings/memory-controllers/arm,pl35x-smc.yaml
@@ -1,26 +1,31 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml#
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl35x-smc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM PL353 Static Memory Controller (SMC) device-tree bindings
+title: Arm PL35x Series Static Memory Controller (SMC)
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
   - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
 
-description:
-  The PL353 Static Memory Controller is a bus where you can connect two kinds
+description: |
+  The PL35x Static Memory Controller is a bus where you can connect two kinds
   of memory interfaces, which are NAND and memory mapped interfaces (such as
-  SRAM or NOR).
+  SRAM or NOR) depending on the specific configuration.
+
+  The TRM is available here:
+  https://documentation-service.arm.com/static/5e8e2524fd977155116a58aa
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
 select:
   properties:
     compatible:
       contains:
-        const: arm,pl353-smc-r2p1
+        enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
   required:
     - compatible
 
@@ -30,7 +35,9 @@ properties:
 
   compatible:
     items:
-      - const: arm,pl353-smc-r2p1
+      - enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
       - const: arm,primecell
 
   "#address-cells":
@@ -46,30 +53,25 @@ properties:
           The three chip select regions are defined in 'ranges'.
 
   clocks:
-    items:
-      - description: clock for the memory device bus
-      - description: main clock of the SMC
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    items:
-      - const: memclk
-      - const: apb_pclk
+    minItems: 1
+    maxItems: 2
 
   ranges:
     minItems: 1
-    description: |
-      Memory bus areas for interacting with the devices. Reflects
-      the memory layout with four integer values following:
-      <cs-number> 0 <offset> <size>
-    items:
-      - description: NAND bank 0
-      - description: NOR/SRAM bank 0
-      - description: NOR/SRAM bank 1
+    maxItems: 8
 
-  interrupts: true
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined or Memory interface 0 IRQ
+      - description: Memory interface 1 IRQ
 
 patternProperties:
-  "@[0-3],[a-f0-9]+$":
+  "@[0-7],[a-f0-9]+$":
     type: object
     description: |
       The child device node represents the controller connected to the SMC
@@ -87,7 +89,7 @@ patternProperties:
               - description: |
                   Chip-select ID, as in the parent range property.
                 minimum: 0
-                maximum: 2
+                maximum: 7
               - description: |
                   Offset of the memory region requested by the device.
               - description: |
@@ -102,12 +104,36 @@ required:
   - reg
   - clock-names
   - clocks
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,pl354
+    then:
+      properties:
+        clocks:
+          # According to TRM, really should be 3 clocks
+          maxItems: 1
+
+        clock-names:
+          const: apb_pclk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock for the memory device bus
+            - description: main clock of the SMC
+
+        clock-names:
+          items:
+            - const: memclk
+            - const: apb_pclk
+
 examples:
   - |
     smcc: memory-controller@e000e000 {
diff --git a/dts/Bindings/memory-controllers/calxeda-ddr-ctrlr.yaml b/dts/Bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
index 96d563fd61..e42aa48870 100644
--- a/dts/Bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
+++ b/dts/Bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/calxeda-ddr-ctrlr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda DDR memory controller binding
+title: Calxeda DDR memory controller
 
 description: |
   The Calxeda DDR memory controller is initialised and programmed by the
diff --git a/dts/Bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml b/dts/Bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
new file mode 100644
index 0000000000..34b5bd153f
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR channel with chip/rank topology description
+
+description:
+  An LPDDR channel is a completely independent set of LPDDR pins (DQ, CA, CS,
+  CK, etc.) that connect one or more LPDDR chips to a host system. The main
+  purpose of this node is to overall LPDDR topology of the system, including the
+  amount of individual LPDDR chips and the ranks per chip.
+
+maintainers:
+  - Julius Werner <jwerner@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - jedec,lpddr2-channel
+      - jedec,lpddr3-channel
+      - jedec,lpddr4-channel
+      - jedec,lpddr5-channel
+
+  io-width:
+    description:
+      The number of DQ pins in the channel. If this number is different
+      from (a multiple of) the io-width of the LPDDR chip, that means that
+      multiple instances of that type of chip are wired in parallel on this
+      channel (with the channel's DQ pins split up between the different
+      chips, and the CA, CS, etc. pins of the different chips all shorted
+      together).  This means that the total physical memory controlled by a
+      channel is equal to the sum of the densities of each rank on the
+      connected LPDDR chip, times the io-width of the channel divided by
+      the io-width of the LPDDR chip.
+    enum:
+      - 8
+      - 16
+      - 32
+      - 64
+      - 128
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^rank@[0-9]+$":
+    type: object
+    description:
+      Each physical LPDDR chip may have one or more ranks. Ranks are
+      internal but fully independent sub-units of the chip. Each LPDDR bus
+      transaction on the channel targets exactly one rank, based on the
+      state of the CS pins. Different ranks may have different densities and
+      timing requirements.
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr2-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr3-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr4-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr5-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+
+required:
+  - compatible
+  - io-width
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr-channel0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr3-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr3-ff,0100", "jedec,lpddr3";
+        reg = <0>;
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+      };
+    };
+
+    lpddr-channel1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr4-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <0>;
+        density = <4096>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+
+      rank@1 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <1>;
+        density = <2048>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+    };
diff --git a/dts/Bindings/memory-controllers/ddr/jedec,lpddr-props.yaml b/dts/Bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
new file mode 100644
index 0000000000..30267ce701
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for LPDDR types
+
+description:
+  Different LPDDR types generally use the same properties and only differ in the
+  range of legal values for each. This file defines the common parts that can be
+  reused for each type. Nodes using this schema should generally be nested under
+  an LPDDR channel node.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    description:
+      Compatible strings can be either explicit vendor names and part numbers
+      (e.g. elpida,ECB240ABACN), or generated strings of the form
+      lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID
+      (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are
+      formatted in lower case hexadecimal representation with leading zeroes.
+      The latter form can be useful when LPDDR nodes are created at runtime by
+      boot firmware that doesn't have access to static part number information.
+
+  reg:
+    description:
+      The rank number of this LPDDR rank when used as a subnode to an LPDDR
+      channel.
+    minimum: 0
+    maximum: 3
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 255
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Density in megabits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 64
+      - 128
+      - 256
+      - 512
+      - 1024
+      - 2048
+      - 3072
+      - 4096
+      - 6144
+      - 8192
+      - 12288
+      - 16384
+      - 24576
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      IO bus width in bits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 8
+      - 16
+      - 32
+
+additionalProperties: true
diff --git a/dts/Bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/dts/Bindings/memory-controllers/ddr/jedec,lpddr2.yaml
index 9d78f14060..a237bc2592 100644
--- a/dts/Bindings/memory-controllers/ddr/jedec,lpddr2.yaml
+++ b/dts/Bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -9,6 +9,9 @@ title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
 
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -17,13 +20,15 @@ properties:
               - elpida,ECB240ABACN
               - elpida,B8132B2PB-6D-F
           - enum:
-              - jedec,lpddr2-s4
-      - items:
-          - enum:
+              - jedec,lpddr2-nvm
               - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
       - items:
+          - pattern: "^lpddr2-[0-9a-f]{2},[0-9a-f]{4}$"
           - enum:
               - jedec,lpddr2-nvm
+              - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
 
   revision-id1:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -41,41 +46,6 @@ properties:
       Property is deprecated, use revision-id instead.
     deprecated: true
 
-  revision-id:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-    description: |
-      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
-    minItems: 2
-    maxItems: 2
-    items:
-      minimum: 0
-      maximum: 255
-
-  density:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      Density in megabits of SDRAM chip. Obtained from device datasheet.
-    enum:
-      - 64
-      - 128
-      - 256
-      - 512
-      - 1024
-      - 2048
-      - 4096
-      - 8192
-      - 16384
-      - 32768
-
-  io-width:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      IO bus width in bits of SDRAM chip. Obtained from device datasheet.
-    enum:
-      - 32
-      - 16
-      - 8
-
   tRRD-min-tck:
     $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 16
@@ -168,7 +138,7 @@ required:
   - density
   - io-width
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/dts/Bindings/memory-controllers/ddr/jedec,lpddr3.yaml
index 48908a1947..e328a1195b 100644
--- a/dts/Bindings/memory-controllers/ddr/jedec,lpddr3.yaml
+++ b/dts/Bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -9,35 +9,24 @@ title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
 
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
 properties:
   compatible:
-    items:
-      - enum:
-          - samsung,K3QF2F20DB
-      - const: jedec,lpddr3
+    oneOf:
+      - items:
+          - enum:
+              - samsung,K3QF2F20DB
+          - const: jedec,lpddr3
+      - items:
+          - pattern: "^lpddr3-[0-9a-f]{2},[0-9a-f]{4}$"
+          - const: jedec,lpddr3
 
   '#address-cells':
     const: 1
     deprecated: true
 
-  density:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      Density in megabits of SDRAM chip.
-    enum:
-      - 4096
-      - 8192
-      - 16384
-      - 32768
-
-  io-width:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      IO bus width in bits of SDRAM chip.
-    enum:
-      - 32
-      - 16
-
   manufacturer-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
@@ -45,15 +34,6 @@ properties:
       deprecated, manufacturer should be derived from the compatible.
     deprecated: true
 
-  revision-id:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-    minItems: 2
-    maxItems: 2
-    items:
-      maximum: 255
-    description: |
-      Revision value of SDRAM chip read from Mode Registers 6 and 7.
-
   '#size-cells':
     const: 0
     deprecated: true
@@ -206,7 +186,7 @@ required:
   - density
   - io-width
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/memory-controllers/ddr/jedec,lpddr4.yaml b/dts/Bindings/memory-controllers/ddr/jedec,lpddr4.yaml
new file mode 100644
index 0000000000..a078892fec
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/jedec,lpddr4.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR4 SDRAM compliant to JEDEC JESD209-4
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr4-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr4
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr4-ff,0100", "jedec,lpddr4";
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+    };
diff --git a/dts/Bindings/memory-controllers/ddr/jedec,lpddr5.yaml b/dts/Bindings/memory-controllers/ddr/jedec,lpddr5.yaml
new file mode 100644
index 0000000000..e441dac5f1
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/jedec,lpddr5.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR5 SDRAM compliant to JEDEC JESD209-5
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr5-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr5
+
+  serial-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Serial IDs read from Mode Registers 47 through 54. One byte per uint32
+      cell (i.e. <MR47 MR48 MR49 MR50 MR51 MR52 MR53 MR54>).
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 255
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr5-01,0200", "jedec,lpddr5";
+        density = <8192>;
+        io-width = <8>;
+        revision-id = <2 0>;
+        serial-id = <3 1 0 0 0 0 0 0>;
+    };
diff --git a/dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml b/dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml
index b8ed52a44d..89ebe39790 100644
--- a/dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml
+++ b/dts/Bindings/memory-controllers/ingenic,nemc-peripherals.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/memory-controllers/ingenic,nemc.yaml b/dts/Bindings/memory-controllers/ingenic,nemc.yaml
index dd13a5106d..a02724221f 100644
--- a/dts/Bindings/memory-controllers/ingenic,nemc.yaml
+++ b/dts/Bindings/memory-controllers/ingenic,nemc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/memory-controllers/mc-peripheral-props.yaml b/dts/Bindings/memory-controllers/mc-peripheral-props.yaml
new file mode 100644
index 0000000000..53ae995462
--- /dev/null
+++ b/dts/Bindings/memory-controllers/mc-peripheral-props.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mc-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a Memory Controller bus.
+
+description:
+  Many Memory Controllers need to add properties to peripheral devices.
+  They could be common properties like reg or they could be controller
+  specific like delay in clock or data lines, etc. These properties need
+  to be defined in the peripheral node because they are per-peripheral
+  and there can be multiple peripherals attached to a controller. All
+  those properties are listed here. The controller specific properties
+  should go in their own separate schema that should be referenced
+  from here.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  reg:
+    description: Bank number, base address and size of the device.
+
+  bank-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bank width of the device, in bytes.
+    enum: [1, 2, 4]
+
+required:
+  - reg
+
+# The controller specific properties go here.
+allOf:
+  - $ref: st,stm32-fmc2-ebi-props.yaml#
+
+additionalProperties: true
diff --git a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml
index 645249ea21..30a403b1b7 100644
--- a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml
@@ -44,6 +44,11 @@ properties:
 
       - items:
           - enum:
+              - renesas,r8a779g0-rpc-if       # R-Car V4H
+          - const: renesas,rcar-gen4-rpc-if   # a generic R-Car gen4 device
+
+      - items:
+          - enum:
               - renesas,r9a07g043-rpc-if      # RZ/G2UL
               - renesas,r9a07g044-rpc-if      # RZ/G2{L,LC}
               - renesas,r9a07g054-rpc-if      # RZ/V2L
diff --git a/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml b/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
new file mode 100644
index 0000000000..475e409506
--- /dev/null
+++ b/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for ST FMC2 Controller
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  st,fmc2-ebi-cs-transaction-type:
+    description: |
+      Select one of the transactions type supported
+      0: Asynchronous mode 1 SRAM/FRAM.
+      1: Asynchronous mode 1 PSRAM.
+      2: Asynchronous mode A SRAM/FRAM.
+      3: Asynchronous mode A PSRAM.
+      4: Asynchronous mode 2 NOR.
+      5: Asynchronous mode B NOR.
+      6: Asynchronous mode C NOR.
+      7: Asynchronous mode D NOR.
+      8: Synchronous read synchronous write PSRAM.
+      9: Synchronous read asynchronous write PSRAM.
+      10: Synchronous read synchronous write NOR.
+      11: Synchronous read asynchronous write NOR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 11
+
+  st,fmc2-ebi-cs-cclk-enable:
+    description: Continuous clock enable (first bank must be configured
+      in synchronous mode). The FMC_CLK is generated continuously
+      during asynchronous and synchronous access. By default, the
+      FMC_CLK is only generated during synchronous access.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-mux-enable:
+    description: Address/Data multiplexed on databus (valid only with
+      NOR and PSRAM transactions type). By default, Address/Data
+      are not multiplexed.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-buswidth:
+    description: Data bus width
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 16 ]
+    default: 16
+
+  st,fmc2-ebi-cs-waitpol-high:
+    description: Wait signal polarity (NWAIT signal active high).
+      By default, NWAIT is active low.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-waitcfg-enable:
+    description: The NWAIT signal indicates wheither the data from the
+      device are valid or if a wait state must be inserted when accessing
+      the device in synchronous mode. By default, the NWAIT signal is
+      active one data cycle before wait state.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-wait-enable:
+    description: The NWAIT signal is enabled (its level is taken into
+      account after the programmed latency period to insert wait states
+      if asserted). By default, the NWAIT signal is disabled.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-asyncwait-enable:
+    description: The NWAIT signal is taken into account during asynchronous
+      transactions. By default, the NWAIT signal is not taken into account
+      during asynchronous transactions.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-cpsize:
+    description: CRAM page size. The controller splits the burst access
+      when the memory page is reached. By default, no burst split when
+      crossing page boundary.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 128, 256, 512, 1024 ]
+    default: 0
+
+  st,fmc2-ebi-cs-byte-lane-setup-ns:
+    description: This property configures the byte lane setup timing
+      defined in nanoseconds from NBLx low to Chip Select NEx low.
+
+  st,fmc2-ebi-cs-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed read/write
+      transactions.
+
+  st,fmc2-ebi-cs-data-setup-ns:
+    description: This property defines the duration of the data setup phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-bus-turnaround-ns:
+    description: This property defines the delay in nanoseconds between the
+      end of current read/write transaction and the next transaction.
+
+  st,fmc2-ebi-cs-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-clk-period-ns:
+    description: This property defines the FMC_CLK output signal period in
+      nanoseconds.
+
+  st,fmc2-ebi-cs-data-latency-ns:
+    description: This property defines the data latency before reading or
+      writing the first data in nanoseconds.
+
+  st,fmc2-ebi-cs-write-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed write
+      transactions.
+
+  st,fmc2-ebi-cs-write-data-setup-ns:
+    description: This property defines the duration of the data setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-bus-turnaround-ns:
+    description: This property defines the delay between the end of current
+      write transaction and the next transaction in nanoseconds.
+
+  st,fmc2-ebi-cs-write-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-max-low-pulse-ns:
+    description: This property defines the maximum chip select low pulse
+      duration in nanoseconds for synchronous transactions. When this timing
+      reaches 0, the controller splits the current access, toggles NE to
+      allow device refresh and restarts a new access.
+
+additionalProperties: true
diff --git a/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 6b516d3895..e76ba767df 100644
--- a/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
 
 description: |
   The FMC2 functional block makes the interface with: synchronous and
@@ -48,143 +48,7 @@ properties:
 patternProperties:
   "^.*@[0-4],[a-f0-9]+$":
     type: object
-
-    properties:
-      reg:
-        description: Bank number, base address and size of the device.
-
-      st,fmc2-ebi-cs-transaction-type:
-        description: |
-          Select one of the transactions type supported
-          0: Asynchronous mode 1 SRAM/FRAM.
-          1: Asynchronous mode 1 PSRAM.
-          2: Asynchronous mode A SRAM/FRAM.
-          3: Asynchronous mode A PSRAM.
-          4: Asynchronous mode 2 NOR.
-          5: Asynchronous mode B NOR.
-          6: Asynchronous mode C NOR.
-          7: Asynchronous mode D NOR.
-          8: Synchronous read synchronous write PSRAM.
-          9: Synchronous read asynchronous write PSRAM.
-          10: Synchronous read synchronous write NOR.
-          11: Synchronous read asynchronous write NOR.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
-        maximum: 11
-
-      st,fmc2-ebi-cs-cclk-enable:
-        description: Continuous clock enable (first bank must be configured
-          in synchronous mode). The FMC_CLK is generated continuously
-          during asynchronous and synchronous access. By default, the
-          FMC_CLK is only generated during synchronous access.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-mux-enable:
-        description: Address/Data multiplexed on databus (valid only with
-          NOR and PSRAM transactions type). By default, Address/Data
-          are not multiplexed.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-buswidth:
-        description: Data bus width
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [ 8, 16 ]
-        default: 16
-
-      st,fmc2-ebi-cs-waitpol-high:
-        description: Wait signal polarity (NWAIT signal active high).
-          By default, NWAIT is active low.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-waitcfg-enable:
-        description: The NWAIT signal indicates wheither the data from the
-          device are valid or if a wait state must be inserted when accessing
-          the device in synchronous mode. By default, the NWAIT signal is
-          active one data cycle before wait state.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-wait-enable:
-        description: The NWAIT signal is enabled (its level is taken into
-          account after the programmed latency period to insert wait states
-          if asserted). By default, the NWAIT signal is disabled.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-asyncwait-enable:
-        description: The NWAIT signal is taken into account during asynchronous
-          transactions. By default, the NWAIT signal is not taken into account
-          during asynchronous transactions.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-cpsize:
-        description: CRAM page size. The controller splits the burst access
-          when the memory page is reached. By default, no burst split when
-          crossing page boundary.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [ 0, 128, 256, 512, 1024 ]
-        default: 0
-
-      st,fmc2-ebi-cs-byte-lane-setup-ns:
-        description: This property configures the byte lane setup timing
-          defined in nanoseconds from NBLx low to Chip Select NEx low.
-
-      st,fmc2-ebi-cs-address-setup-ns:
-        description: This property defines the duration of the address setup
-          phase in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-address-hold-ns:
-        description: This property defines the duration of the address hold
-          phase in nanoseconds used for asynchronous multiplexed read/write
-          transactions.
-
-      st,fmc2-ebi-cs-data-setup-ns:
-        description: This property defines the duration of the data setup phase
-          in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-bus-turnaround-ns:
-        description: This property defines the delay in nanoseconds between the
-          end of current read/write transaction and the next transaction.
-
-      st,fmc2-ebi-cs-data-hold-ns:
-        description: This property defines the duration of the data hold phase
-          in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-clk-period-ns:
-        description: This property defines the FMC_CLK output signal period in
-          nanoseconds.
-
-      st,fmc2-ebi-cs-data-latency-ns:
-        description: This property defines the data latency before reading or
-          writing the first data in nanoseconds.
-
-      st,fmc2_ebi-cs-write-address-setup-ns:
-        description: This property defines the duration of the address setup
-          phase in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-write-address-hold-ns:
-        description: This property defines the duration of the address hold
-          phase in nanoseconds used for asynchronous multiplexed write
-          transactions.
-
-      st,fmc2-ebi-cs-write-data-setup-ns:
-        description: This property defines the duration of the data setup
-          phase in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-write-bus-turnaround-ns:
-        description: This property defines the delay between the end of current
-          write transaction and the next transaction in nanoseconds.
-
-      st,fmc2-ebi-cs-write-data-hold-ns:
-        description: This property defines the duration of the data hold phase
-          in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-max-low-pulse-ns:
-        description: This property defines the maximum chip select low pulse
-          duration in nanoseconds for synchronous transactions. When this timing
-          reaches 0, the controller splits the current access, toggles NE to
-          allow device refresh and restarts a new access.
-
-    required:
-      - reg
+    $ref: mc-peripheral-props.yaml#
 
 required:
   - "#address-cells"
diff --git a/dts/Bindings/memory-controllers/ti,gpmc-child.yaml b/dts/Bindings/memory-controllers/ti,gpmc-child.yaml
index 6e3995bb16..383d19e0ba 100644
--- a/dts/Bindings/memory-controllers/ti,gpmc-child.yaml
+++ b/dts/Bindings/memory-controllers/ti,gpmc-child.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: device tree bindings for children of the Texas Instruments GPMC
+title: Texas Instruments GPMC Bus Child Nodes
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
@@ -230,6 +230,13 @@ properties:
       Wait-pin used by client. Must be less than "gpmc,num-waitpins".
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,wait-pin-polarity:
+    description: |
+      Set the desired polarity for the selected wait pin.
+      0 for active low, 1 for active high.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
   gpmc,wait-on-read:
     description: Enables wait monitoring on reads.
     type: boolean
diff --git a/dts/Bindings/memory-controllers/ti,gpmc.yaml b/dts/Bindings/memory-controllers/ti,gpmc.yaml
index e188a4bf75..4f30173ad7 100644
--- a/dts/Bindings/memory-controllers/ti,gpmc.yaml
+++ b/dts/Bindings/memory-controllers/ti,gpmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments GPMC Memory Controller device-tree bindings
+title: Texas Instruments GPMC Memory Controller
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
diff --git a/dts/Bindings/mfd/actions,atc260x.yaml b/dts/Bindings/mfd/actions,atc260x.yaml
index dd43a0c766..c3a368a0fe 100644
--- a/dts/Bindings/mfd/actions,atc260x.yaml
+++ b/dts/Bindings/mfd/actions,atc260x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Actions Semi ATC260x Power Management IC bindings
+title: Actions Semi ATC260x Power Management IC
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/dts/Bindings/mfd/ampere,smpro.yaml b/dts/Bindings/mfd/ampere,smpro.yaml
new file mode 100644
index 0000000000..c442c3cdff
--- /dev/null
+++ b/dts/Bindings/mfd/ampere,smpro.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ampere Altra SMPro firmware driver
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+description: |
+  Ampere Altra SMPro firmware may contain different blocks like hardware
+  monitoring, error monitoring and other miscellaneous features.
+
+properties:
+  compatible:
+    enum:
+      - ampere,smpro
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        smpro@4f {
+            compatible = "ampere,smpro";
+            reg = <0x4f>;
+        };
+    };
diff --git a/dts/Bindings/mfd/brcm,twd.yaml b/dts/Bindings/mfd/brcm,twd.yaml
index 634526f790..e5136a37b0 100644
--- a/dts/Bindings/mfd/brcm,twd.yaml
+++ b/dts/Bindings/mfd/brcm,twd.yaml
@@ -36,6 +36,9 @@ properties:
     const: 1
 
 patternProperties:
+  '^timer@[a-f0-9]+$':
+    $ref: /schemas/timer/brcm,bcmbca-timer.yaml
+
   '^watchdog@[a-f0-9]+$':
     $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml
 
@@ -54,6 +57,11 @@ examples:
         #address-cells = <1>;
         #size-cells = <1>;
 
+        timer@0 {
+            compatible = "brcm,bcm63138-timer";
+            reg = <0x0 0x28>;
+        };
+
         watchdog@28 {
             compatible = "brcm,bcm7038-wdt";
             reg = <0x28 0x8>;
diff --git a/dts/Bindings/mfd/da9062.txt b/dts/Bindings/mfd/da9062.txt
index bab0d0e66c..e4eedd3bd2 100644
--- a/dts/Bindings/mfd/da9062.txt
+++ b/dts/Bindings/mfd/da9062.txt
@@ -33,11 +33,6 @@ Required properties:
     "dlg,da9061" for DA9061
 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
   modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
 
 Optional properties:
 
@@ -48,6 +43,12 @@ Optional properties:
 See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
 GPIO bindings.
 
+- interrupts : IRQ line information.
+- interrupt-controller
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+further information on IRQ bindings.
+
 Sub-nodes:
 
 - regulators : This node defines the settings for the LDOs and BUCKs.
@@ -85,7 +86,7 @@ Sub-nodes:
 
 - onkey : See ../input/da9062-onkey.txt
 
-- watchdog: See ../watchdog/da9062-watchdog.txt
+- watchdog: See ../watchdog/da9062-wdt.txt
 
 - thermal : See ../thermal/da9062-thermal.txt
 
diff --git a/dts/Bindings/mfd/ene-kb3930.yaml b/dts/Bindings/mfd/ene-kb3930.yaml
index 08af356f5d..9b11b6e2bb 100644
--- a/dts/Bindings/mfd/ene-kb3930.yaml
+++ b/dts/Bindings/mfd/ene-kb3930.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ENE KB3930 Embedded Controller bindings
+title: ENE KB3930 Embedded Controller
 
 description: |
   This binding describes the ENE KB3930 Embedded Controller attached to an
diff --git a/dts/Bindings/mfd/ene-kb930.yaml b/dts/Bindings/mfd/ene-kb930.yaml
index 06ed9ec8f4..02c111def5 100644
--- a/dts/Bindings/mfd/ene-kb930.yaml
+++ b/dts/Bindings/mfd/ene-kb930.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/ene-kb930.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ENE KB930 Embedded Controller bindings
+title: ENE KB930 Embedded Controller
 
 description: |
   This binding describes the ENE KB930 Embedded Controller attached to an
@@ -13,6 +13,8 @@ description: |
 maintainers:
   - Dmitry Osipenko <digetx@gmail.com>
 
+$ref: /schemas/power/supply/power-supply.yaml
+
 properties:
   compatible:
     items:
@@ -22,15 +24,13 @@ properties:
   reg:
     maxItems: 1
 
-  monitored-battery: true
-  power-supplies: true
   system-power-controller: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml b/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml
index f09577105b..20067002cc 100644
--- a/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml
+++ b/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
+title: Freescale i.MX8qm/qxp Control and Status Registers Module
 
 maintainers:
   - Liu Ying <victor.liu@nxp.com>
diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml
index 04962bb295..3d5efa5578 100644
--- a/dts/Bindings/mfd/google,cros-ec.yaml
+++ b/dts/Bindings/mfd/google,cros-ec.yaml
@@ -20,19 +20,21 @@ properties:
   compatible:
     oneOf:
       - description:
-          For implementations of the EC is connected through I2C.
+          For implementations of the EC connected through I2C.
         const: google,cros-ec-i2c
       - description:
-          For implementations of the EC is connected through SPI.
+          For implementations of the EC connected through SPI.
         const: google,cros-ec-spi
       - description:
-          For implementations of the EC is connected through RPMSG.
+          For implementations of the FPMCU connected through SPI.
+        items:
+          - const: google,cros-ec-fp
+          - const: google,cros-ec-spi
+      - description:
+          For implementations of the EC connected through RPMSG.
         const: google,cros-ec-rpmsg
 
-  controller-data:
-    description:
-      SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml
-    type: object
+  controller-data: true
 
   google,cros-ec-spi-pre-delay:
     description:
@@ -62,8 +64,7 @@ properties:
       the SCP.
     $ref: "/schemas/types.yaml#/definitions/string"
 
-  spi-max-frequency:
-    description: Maximum SPI frequency of the device in Hz.
+  spi-max-frequency: true
 
   reg:
     maxItems: 1
@@ -71,6 +72,15 @@ properties:
   interrupts:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  boot0-gpios:
+    maxItems: 1
+    description: Assert for bootloader mode.
+
+  vdd-supply: true
+
   wakeup-source:
     description: Button can wake-up the system.
 
@@ -155,18 +165,67 @@ allOf:
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - google,cros-ec-i2c
-              - google,cros-ec-rpmsg
+          not:
+            contains:
+              const: google,cros-ec-spi
     then:
       properties:
+        controller-data: false
         google,cros-ec-spi-pre-delay: false
         google,cros-ec-spi-msg-delay: false
         spi-max-frequency: false
     else:
       $ref: /schemas/spi/spi-peripheral-props.yaml
 
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: google,cros-ec-rpmsg
+    then:
+      properties:
+        mediatek,rpmsg-name: false
+
+      required:
+        - reg
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,cros-ec-fp
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+        typec: false
+        ec-pwm: false
+        kbd-led-backlight: false
+        keyboard-controller: false
+        proximity: false
+        codecs: false
+        cbas: false
+
+      patternProperties:
+        "^i2c-tunnel[0-9]*$": false
+        "^regulator@[0-9]+$": false
+        "^extcon[0-9]*$": false
+
+      # Using additionalProperties: false here and
+      # listing true properties doesn't work
+
+      required:
+        - reset-gpios
+        - boot0-gpios
+        - vdd-supply
+    else:
+      properties:
+        reset-gpios: false
+        boot0-gpios: false
+        vdd-supply: false
+
 additionalProperties: false
 
 examples:
@@ -222,4 +281,22 @@ examples:
             compatible = "google,cros-ec-rpmsg";
         };
     };
+
+  # Example for FPMCU
+  - |
+    spi0 {
+      #address-cells = <0x1>;
+      #size-cells = <0x0>;
+
+      ec@0 {
+        compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+        reg = <0x0>;
+        interrupt-parent = <&gpio_controller>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+        spi-max-frequency = <3000000>;
+        reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>;
+        boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&pp3300_fp_mcu>;
+      };
+    };
 ...
diff --git a/dts/Bindings/mfd/max77650.yaml b/dts/Bindings/mfd/max77650.yaml
index b0a0f0d3d9..4181174fcf 100644
--- a/dts/Bindings/mfd/max77650.yaml
+++ b/dts/Bindings/mfd/max77650.yaml
@@ -100,14 +100,12 @@ examples:
                 compatible = "maxim,max77650-regulator";
 
                 max77650_ldo: regulator-ldo {
-                    regulator-compatible = "ldo";
                     regulator-name = "max77650-ldo";
                     regulator-min-microvolt = <1350000>;
                     regulator-max-microvolt = <2937500>;
                 };
 
                 max77650_sbb0: regulator-sbb0 {
-                    regulator-compatible = "sbb0";
                     regulator-name = "max77650-sbb0";
                     regulator-min-microvolt = <800000>;
                     regulator-max-microvolt = <1587500>;
diff --git a/dts/Bindings/mfd/mediatek,mt6360.yaml b/dts/Bindings/mfd/mediatek,mt6360.yaml
index 28eee02441..fb65abf30d 100644
--- a/dts/Bindings/mfd/mediatek,mt6360.yaml
+++ b/dts/Bindings/mfd/mediatek,mt6360.yaml
@@ -83,7 +83,6 @@ examples:
                 richtek,vinovp-microvolt = <14500000>;
 
                 otg_vbus_regulator: usb-otg-vbus-regulator {
-                    regulator-compatible = "usb-otg-vbus";
                     regulator-name = "usb-otg-vbus";
                     regulator-min-microvolt = <4425000>;
                     regulator-max-microvolt = <5825000>;
@@ -145,7 +144,6 @@ examples:
                 compatible = "mediatek,mt6360-regulator";
                 LDO_VIN3-supply = <&BUCK2>;
                 buck1 {
-                    regulator-compatible = "BUCK1";
                     regulator-name = "mt6360,buck1";
                     regulator-min-microvolt = <300000>;
                     regulator-max-microvolt = <1300000>;
@@ -154,7 +152,6 @@ examples:
                          MT6360_OPMODE_ULP>;
                 };
                 BUCK2: buck2 {
-                    regulator-compatible = "BUCK2";
                     regulator-name = "mt6360,buck2";
                     regulator-min-microvolt = <300000>;
                     regulator-max-microvolt = <1300000>;
@@ -163,7 +160,6 @@ examples:
                          MT6360_OPMODE_ULP>;
                 };
                 ldo6 {
-                    regulator-compatible = "LDO6";
                     regulator-name = "mt6360,ldo6";
                     regulator-min-microvolt = <500000>;
                     regulator-max-microvolt = <2100000>;
@@ -171,7 +167,6 @@ examples:
                          MT6360_OPMODE_LP>;
                 };
                 ldo7 {
-                    regulator-compatible = "LDO7";
                     regulator-name = "mt6360,ldo7";
                     regulator-min-microvolt = <500000>;
                     regulator-max-microvolt = <2100000>;
@@ -179,7 +174,6 @@ examples:
                          MT6360_OPMODE_LP>;
                 };
                 ldo1 {
-                    regulator-compatible = "LDO1";
                     regulator-name = "mt6360,ldo1";
                     regulator-min-microvolt = <1200000>;
                     regulator-max-microvolt = <3600000>;
@@ -187,7 +181,6 @@ examples:
                          MT6360_OPMODE_LP>;
                 };
                 ldo2 {
-                    regulator-compatible = "LDO2";
                     regulator-name = "mt6360,ldo2";
                     regulator-min-microvolt = <1200000>;
                     regulator-max-microvolt = <3600000>;
@@ -195,7 +188,6 @@ examples:
                          MT6360_OPMODE_LP>;
                 };
                 ldo3 {
-                    regulator-compatible = "LDO3";
                     regulator-name = "mt6360,ldo3";
                     regulator-min-microvolt = <1200000>;
                     regulator-max-microvolt = <3600000>;
@@ -203,7 +195,6 @@ examples:
                          MT6360_OPMODE_LP>;
                 };
                 ldo5 {
-                    regulator-compatible = "LDO5";
                     regulator-name = "mt6360,ldo5";
                     regulator-min-microvolt = <2700000>;
                     regulator-max-microvolt = <3600000>;
diff --git a/dts/Bindings/mfd/mscc,ocelot.yaml b/dts/Bindings/mfd/mscc,ocelot.yaml
index 8bf45a5673..1d1fee1a16 100644
--- a/dts/Bindings/mfd/mscc,ocelot.yaml
+++ b/dts/Bindings/mfd/mscc,ocelot.yaml
@@ -12,7 +12,8 @@ maintainers:
 description: |
   The Ocelot ethernet switch family contains chips that have an internal CPU
   (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have
-  the option to be controlled externally, which is the purpose of this driver.
+  the option to be controlled externally via external interfaces like SPI or
+  PCIe.
 
   The switch family is a multi-port networking switch that supports many
   interfaces. Additionally, the device can perform pin control, MDIO buses, and
@@ -61,7 +62,6 @@ required:
   - reg
   - '#address-cells'
   - '#size-cells'
-  - spi-max-frequency
 
 additionalProperties: false
 
diff --git a/dts/Bindings/mfd/mt6397.txt b/dts/Bindings/mfd/mt6397.txt
index 0088442efc..518986c448 100644
--- a/dts/Bindings/mfd/mt6397.txt
+++ b/dts/Bindings/mfd/mt6397.txt
@@ -21,6 +21,7 @@ Required properties:
 compatible:
 	"mediatek,mt6323" for PMIC MT6323
 	"mediatek,mt6331" for PMIC MT6331 and MT6332
+	"mediatek,mt6357" for PMIC MT6357
 	"mediatek,mt6358" for PMIC MT6358 and MT6366
 	"mediatek,mt6359" for PMIC MT6359
 	"mediatek,mt6397" for PMIC MT6397
diff --git a/dts/Bindings/mfd/qcom,pm8008.yaml b/dts/Bindings/mfd/qcom,pm8008.yaml
index ec3138c1bb..e6a2387d86 100644
--- a/dts/Bindings/mfd/qcom,pm8008.yaml
+++ b/dts/Bindings/mfd/qcom,pm8008.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. PM8008 PMIC bindings
+title: Qualcomm Technologies, Inc. PM8008 PMIC
 
 maintainers:
   - Guru Das Srinagesh <gurus@codeaurora.org>
diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.yaml b/dts/Bindings/mfd/qcom,spmi-pmic.yaml
index 6a3e3ede1e..37d16e16f4 100644
--- a/dts/Bindings/mfd/qcom,spmi-pmic.yaml
+++ b/dts/Bindings/mfd/qcom,spmi-pmic.yaml
@@ -33,6 +33,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,pm6125
           - qcom,pm6150
           - qcom,pm6150l
           - qcom,pm6350
@@ -98,10 +99,16 @@ properties:
     type: object
     $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
 
+  pwm:
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
 patternProperties:
   "^adc@[0-9a-f]+$":
     type: object
-    $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
+    oneOf:
+      - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml#
+      - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
 
   "^adc-tm@[0-9a-f]+$":
     type: object
@@ -111,11 +118,13 @@ patternProperties:
     type: object
     additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet
 
-  "extcon@[0-9a-f]+$":
+  "^charger@[0-9a-f]+$":
     type: object
-    $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
+    oneOf:
+      - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
+      - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
 
-  "gpio(s)?@[0-9a-f]+$":
+  "gpio@[0-9a-f]+$":
     type: object
     $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
 
@@ -123,10 +132,6 @@ patternProperties:
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
 
-  "pwm@[0-9a-f]+$":
-    type: object
-    $ref: /schemas/leds/leds-qcom-lpg.yaml#
-
   "^rtc@[0-9a-f]+$":
     type: object
     $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
@@ -135,9 +140,17 @@ patternProperties:
     type: object
     $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
 
+  "^usb-detect@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
+
+  "^usb-vbus-regulator@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/regulator/qcom,usb-vbus-regulator.yaml#
+
   "^vibrator@[0-9a-f]+$":
     type: object
-    additionalProperties: true # FIXME qcom,pm8916-vib binding not converted yet
+    $ref: /schemas/input/qcom,pm8xxx-vib.yaml#
 
   "^mpps@[0-9a-f]+$":
     type: object
@@ -199,7 +212,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            pmi8998_gpio: gpios@c000 {
+            pmi8998_gpio: gpio@c000 {
                 compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
                 reg = <0xc000>;
                 gpio-controller;
@@ -284,7 +297,7 @@ examples:
             };
         };
 
-        pm6150_gpio: gpios@c000 {
+        pm6150_gpio: gpio@c000 {
             compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
             reg = <0xc000>;
             gpio-controller;
diff --git a/dts/Bindings/mfd/qcom,tcsr.yaml b/dts/Bindings/mfd/qcom,tcsr.yaml
index b12809b5cc..adcae6c007 100644
--- a/dts/Bindings/mfd/qcom,tcsr.yaml
+++ b/dts/Bindings/mfd/qcom,tcsr.yaml
@@ -17,10 +17,12 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,msm8976-tcsr
           - qcom,msm8998-tcsr
           - qcom,qcs404-tcsr
           - qcom,sc7180-tcsr
           - qcom,sc7280-tcsr
+          - qcom,sc8280xp-tcsr
           - qcom,sdm630-tcsr
           - qcom,sdm845-tcsr
           - qcom,sm8150-tcsr
diff --git a/dts/Bindings/mfd/qcom-pm8xxx.yaml b/dts/Bindings/mfd/qcom-pm8xxx.yaml
index 61bd0b3ce0..9acad9d326 100644
--- a/dts/Bindings/mfd/qcom-pm8xxx.yaml
+++ b/dts/Bindings/mfd/qcom-pm8xxx.yaml
@@ -15,11 +15,15 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8018
-      - qcom,pm8058
-      - qcom,pm8821
-      - qcom,pm8921
+    oneOf:
+      - enum:
+          - qcom,pm8058
+          - qcom,pm8821
+          - qcom,pm8921
+      - items:
+          - enum:
+              - qcom,pm8018
+          - const: qcom,pm8921
 
   reg:
     maxItems: 1
@@ -39,6 +43,10 @@ properties:
   interrupt-controller: true
 
 patternProperties:
+  "led@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/qcom,pm8058-led.yaml#
+
   "rtc@[0-9a-f]+$":
     type: object
     $ref: "../rtc/qcom-pm8xxx-rtc.yaml"
@@ -52,4 +60,23 @@ required:
   - interrupt-controller
 
 additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@0 {
+        compatible = "qcom,pm8921";
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
 ...
diff --git a/dts/Bindings/mfd/rockchip,rk817.yaml b/dts/Bindings/mfd/rockchip,rk817.yaml
index 935e170992..269fb85b20 100644
--- a/dts/Bindings/mfd/rockchip,rk817.yaml
+++ b/dts/Bindings/mfd/rockchip,rk817.yaml
@@ -124,6 +124,8 @@ properties:
       The child node for the charger to hold additional properties. If a
       battery is not in use, this node can be omitted.
     type: object
+    $ref: /schemas/power/supply/power-supply.yaml
+
     properties:
       monitored-battery:
         description: |
diff --git a/dts/Bindings/mfd/rohm,bd71815-pmic.yaml b/dts/Bindings/mfd/rohm,bd71815-pmic.yaml
index fbface7206..d6d120a780 100644
--- a/dts/Bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/dts/Bindings/mfd/rohm,bd71815-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71815 Power Management Integrated Circuit bindings
+title: ROHM BD71815 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71815AGW is a single-chip power management ICs for battery-powered
diff --git a/dts/Bindings/mfd/rohm,bd71828-pmic.yaml b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml
index 8380166d17..ec3adcd348 100644
--- a/dts/Bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71828 Power Management Integrated Circuit bindings
+title: ROHM BD71828 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71828GW is a single-chip power management IC for battery-powered portable
diff --git a/dts/Bindings/mfd/rohm,bd71837-pmic.yaml b/dts/Bindings/mfd/rohm,bd71837-pmic.yaml
index 3bfdd33702..7aa343f58c 100644
--- a/dts/Bindings/mfd/rohm,bd71837-pmic.yaml
+++ b/dts/Bindings/mfd/rohm,bd71837-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71837 Power Management Integrated Circuit bindings
+title: ROHM BD71837 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71837MWV is programmable Power Management ICs for powering single-core,
diff --git a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml
index 5d531051a1..7ab7b2c7f3 100644
--- a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml
+++ b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering
diff --git a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml
index 6483860da9..10f207a381 100644
--- a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml
+++ b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings
+title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD9576MUF and BD9573MUF are power management ICs primarily intended for
diff --git a/dts/Bindings/mfd/st,stm32-lptimer.yaml b/dts/Bindings/mfd/st,stm32-lptimer.yaml
index d950dd5d48..27329c5dc3 100644
--- a/dts/Bindings/mfd/st,stm32-lptimer.yaml
+++ b/dts/Bindings/mfd/st,stm32-lptimer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Low-Power Timers bindings
+title: STMicroelectronics STM32 Low-Power Timers
 
 description: |
   The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
diff --git a/dts/Bindings/mfd/st,stm32-timers.yaml b/dts/Bindings/mfd/st,stm32-timers.yaml
index e2c3c3b44a..f84e09a574 100644
--- a/dts/Bindings/mfd/st,stm32-timers.yaml
+++ b/dts/Bindings/mfd/st,stm32-timers.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Timers bindings
+title: STMicroelectronics STM32 Timers
 
 description: |
   This hardware block provides 3 types of timer along with PWM functionality:
diff --git a/dts/Bindings/mfd/st,stmfx.yaml b/dts/Bindings/mfd/st,stmfx.yaml
index b4d5430258..76551c90b1 100644
--- a/dts/Bindings/mfd/st,stmfx.yaml
+++ b/dts/Bindings/mfd/st,stmfx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectonics Multi-Function eXpander (STMFX) bindings
+title: STMicroelectonics Multi-Function eXpander (STMFX)
 
 description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
                communication with the main MCU. Its main features are GPIO expansion,
diff --git a/dts/Bindings/mfd/st,stpmic1.yaml b/dts/Bindings/mfd/st,stpmic1.yaml
index 426658ad81..9573e4af94 100644
--- a/dts/Bindings/mfd/st,stpmic1.yaml
+++ b/dts/Bindings/mfd/st,stpmic1.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectonics STPMIC1 Power Management IC bindings
+title: STMicroelectonics STPMIC1 Power Management IC
 
 description: STMicroelectronics STPMIC1 Power Management IC
 
diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml
index 4e4baf5379..1b01bd0104 100644
--- a/dts/Bindings/mfd/syscon.yaml
+++ b/dts/Bindings/mfd/syscon.yaml
@@ -53,6 +53,7 @@ properties:
               - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
+              - nuvoton,wpcm450-shm
               - rockchip,px30-qos
               - rockchip,rk3036-qos
               - rockchip,rk3066-qos
diff --git a/dts/Bindings/mfd/ti,am3359-tscadc.yaml b/dts/Bindings/mfd/ti,am3359-tscadc.yaml
index 34bf6a0143..23a63265be 100644
--- a/dts/Bindings/mfd/ti,am3359-tscadc.yaml
+++ b/dts/Bindings/mfd/ti,am3359-tscadc.yaml
@@ -52,6 +52,9 @@ properties:
     type: object
     description: Magnetic reader
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/mfd/ti,j721e-system-controller.yaml b/dts/Bindings/mfd/ti,j721e-system-controller.yaml
index 873ee0c097..76ef4352e1 100644
--- a/dts/Bindings/mfd/ti,j721e-system-controller.yaml
+++ b/dts/Bindings/mfd/ti,j721e-system-controller.yaml
@@ -26,7 +26,9 @@ properties:
   compatible:
     items:
       - enum:
+          - ti,j7200-system-controller
           - ti,j721e-system-controller
+          - ti,j721s2-system-controller
       - const: syscon
       - const: simple-mfd
 
diff --git a/dts/Bindings/mips/brcm/brcm,bmips.txt b/dts/Bindings/mips/brcm/brcm,bmips.txt
deleted file mode 100644
index 8ef71b4085..0000000000
--- a/dts/Bindings/mips/brcm/brcm,bmips.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-* Broadcom MIPS (BMIPS) CPUs
-
-Required properties:
-- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380",
-  "brcm,bmips5000"
-
-- mips-hpt-frequency: This is common to all CPUs in the system so it lives
-  under the "cpus" node.
diff --git a/dts/Bindings/mips/brcm/soc.yaml b/dts/Bindings/mips/brcm/soc.yaml
new file mode 100644
index 0000000000..975945ca28
--- /dev/null
+++ b/dts/Bindings/mips/brcm/soc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/brcm/soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom cable/DSL/settop platforms
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: |
+    Boards Broadcom cable/DSL/settop SoC shall have the following properties.
+    The experimental -viper variants are for running Linux on the 3384's
+    BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    enum:
+      - brcm,bcm3368
+      - brcm,bcm3384
+      - brcm,bcm33843
+      - brcm,bcm3384-viper
+      - brcm,bcm33843-viper
+      - brcm,bcm6328
+      - brcm,bcm6358
+      - brcm,bcm6362
+      - brcm,bcm6368
+      - brcm,bcm63168
+      - brcm,bcm63268
+      - brcm,bcm7125
+      - brcm,bcm7346
+      - brcm,bcm7358
+      - brcm,bcm7360
+      - brcm,bcm7362
+      - brcm,bcm7420
+      - brcm,bcm7425
+
+  cpus:
+    type: object
+    additionalProperties: false
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      mips-hpt-frequency:
+        description: MIPS counter high precision timer frequency.
+         This is common to all CPUs in the system so it lives
+         under the "cpus" node.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^cpu@[0-9]$":
+        type: object
+        $ref: /schemas/mips/cpus.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - mips-hpt-frequency
+
+additionalProperties: true
+
+examples:
+  - |
+     / {
+         compatible = "brcm,bcm3368";
+         #address-cells = <1>;
+         #size-cells = <1>;
+         model = "Broadcom 3368";
+
+         cpus {
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           mips-hpt-frequency = <150000000>;
+
+           cpu@0 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <0>;
+           };
+
+           cpu@1 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <1>;
+           };
+         };
+       };
+...
diff --git a/dts/Bindings/mips/cpus.yaml b/dts/Bindings/mips/cpus.yaml
new file mode 100644
index 0000000000..cf382dea39
--- /dev/null
+++ b/dts/Bindings/mips/cpus.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPUs
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description: |
+  The device tree allows to describe the layout of CPUs in a system through
+  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+  defining properties for every CPU.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bmips3300
+      - brcm,bmips4350
+      - brcm,bmips4380
+      - brcm,bmips5000
+      - brcm,bmips5200
+      - ingenic,xburst-mxu1.0
+      - ingenic,xburst-fpu1.0-mxu1.1
+      - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst2-fpu2.1-mxu2.1-smt
+      - loongson,gs264
+      - mips,m14Kc
+      - mips,mips4Kc
+      - mips,mips4KEc
+      - mips,mips24Kc
+      - mips,mips24KEc
+      - mips,mips74Kc
+      - mips,mips1004Kc
+      - mti,interaptiv
+      - mti,mips24KEc
+      - mti,mips14KEc
+      - mti,mips14Kc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  device_type: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ingenic,xburst-mxu1.0
+              - ingenic,xburst-fpu1.0-mxu1.1
+              - ingenic,xburst-fpu2.0-mxu2.0
+              - ingenic,xburst2-fpu2.1-mxu2.1-smt
+    then:
+      required:
+        - device_type
+        - clocks
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      cpu@0 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <0>;
+      };
+
+      cpu@1 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <1>;
+      };
+    };
+
+  - |
+    // Example 2 (Ingenic CPU)
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    cpus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <0>;
+
+        clocks = <&cgu JZ4780_CLK_CPU>;
+      };
+
+      cpu@1 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <1>;
+
+        clocks = <&cgu JZ4780_CLK_CORE1>;
+      };
+    };
+...
diff --git a/dts/Bindings/mips/ingenic/devices.yaml b/dts/Bindings/mips/ingenic/devices.yaml
index ee00d414df..f2e822afe7 100644
--- a/dts/Bindings/mips/ingenic/devices.yaml
+++ b/dts/Bindings/mips/ingenic/devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/ingenic/devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic XBurst based Platforms Device Tree Bindings
+title: Ingenic XBurst based Platforms
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
diff --git a/dts/Bindings/mips/ingenic/ingenic,cpu.yaml b/dts/Bindings/mips/ingenic/ingenic,cpu.yaml
deleted file mode 100644
index b7e7fa7154..0000000000
--- a/dts/Bindings/mips/ingenic/ingenic,cpu.yaml
+++ /dev/null
@@ -1,69 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mips/ingenic/ingenic,cpu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Bindings for Ingenic XBurst family CPUs
-
-maintainers:
-  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
-
-description:
-  Ingenic XBurst family CPUs shall have the following properties.
-
-properties:
-  compatible:
-    oneOf:
-
-      - description: Ingenic XBurst®1 CPU Cores
-        enum:
-          - ingenic,xburst-mxu1.0
-          - ingenic,xburst-fpu1.0-mxu1.1
-          - ingenic,xburst-fpu2.0-mxu2.0
-
-      - description: Ingenic XBurst®2 CPU Cores
-        enum:
-          - ingenic,xburst2-fpu2.1-mxu2.1-smt
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  device_type: true
-
-required:
-  - device_type
-  - compatible
-  - reg
-  - clocks
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
-
-    cpus {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        cpu0: cpu@0 {
-                device_type = "cpu";
-                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
-                reg = <0>;
-
-                clocks = <&cgu JZ4780_CLK_CPU>;
-        };
-
-        cpu1: cpu@1 {
-                device_type = "cpu";
-                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
-                reg = <1>;
-
-                clocks = <&cgu JZ4780_CLK_CORE1>;
-        };
-    };
-...
diff --git a/dts/Bindings/mips/lantiq/lantiq,dma-xway.yaml b/dts/Bindings/mips/lantiq/lantiq,dma-xway.yaml
index 40130fefa2..15d41bdbdc 100644
--- a/dts/Bindings/mips/lantiq/lantiq,dma-xway.yaml
+++ b/dts/Bindings/mips/lantiq/lantiq,dma-xway.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/lantiq/lantiq,dma-xway.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Lantiq Xway SoCs DMA Controller DT bindings
+title: Lantiq Xway SoCs DMA Controller
 
 maintainers:
   - John Crispin <john@phrozen.org>
diff --git a/dts/Bindings/mips/loongson/devices.yaml b/dts/Bindings/mips/loongson/devices.yaml
index 9fee6708e6..f13ce386f4 100644
--- a/dts/Bindings/mips/loongson/devices.yaml
+++ b/dts/Bindings/mips/loongson/devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Loongson based Platforms Device Tree Bindings
+title: Loongson based Platforms
 
 maintainers:
   - Jiaxun Yang <jiaxun.yang@flygoat.com>
diff --git a/dts/Bindings/misc/idt,89hpesx.yaml b/dts/Bindings/misc/idt,89hpesx.yaml
new file mode 100644
index 0000000000..452236e793
--- /dev/null
+++ b/dts/Bindings/misc/idt,89hpesx.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/idt,89hpesx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: '^idt,89hpes'
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - pattern: '^idt,89hpes(8nt2|12nt3|12n3a?|24n3a?|(12|24)t3g2|4t4g2|10t4g2|[56]t5|8t5a?)$'
+      - pattern: '^idt,89hpes(6t6g2|16t7|(24t6|32t8|48t12|16t4a?)(g2)?)$'
+      - pattern: '^idt,89hpes(24nt6a|32nt8[ab]|12nt12|16nt16|24nt24|32nt24[ab])g2$'
+      - pattern: '^idt,89hpes((32h8|48h12a?|22h16|34h16|64h16a?)(g2)?|16h16)$'
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+  
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^eeprom@':
+    $ref: /schemas/eeprom/at24.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        description: Only a subset of devices are supported
+        pattern: ',24c(32|64|128|256|512)$'
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        idt@74 {
+            compatible = "idt,89hpes32nt8ag2";
+            reg = <0x74>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@50 {
+                compatible = "atmel,24c64";
+                reg = <0x50>;
+                read-only;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/misc/idt_89hpesx.txt b/dts/Bindings/misc/idt_89hpesx.txt
deleted file mode 100644
index b9093b79ab..0000000000
--- a/dts/Bindings/misc/idt_89hpesx.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices
-
-Required properties:
-  - compatible : should be "<manufacturer>,<type>"
-		 Basically there is only one manufacturer: idt, but some
-		 compatible devices may be produced in future. Following devices
-		 are supported: 89hpes8nt2, 89hpes12nt3, 89hpes24nt6ag2,
-		 89hpes32nt8ag2, 89hpes32nt8bg2, 89hpes12nt12g2, 89hpes16nt16g2,
-		 89hpes24nt24g2, 89hpes32nt24ag2, 89hpes32nt24bg2;
-		 89hpes12n3, 89hpes12n3a, 89hpes24n3, 89hpes24n3a;
-		 89hpes32h8, 89hpes32h8g2, 89hpes48h12, 89hpes48h12g2,
-		 89hpes48h12ag2, 89hpes16h16, 89hpes22h16, 89hpes22h16g2,
-		 89hpes34h16, 89hpes34h16g2, 89hpes64h16, 89hpes64h16g2,
-		 89hpes64h16ag2;
-		 89hpes12t3g2, 89hpes24t3g2, 89hpes16t4, 89hpes4t4g2,
-		 89hpes10t4g2, 89hpes16t4g2, 89hpes16t4ag2, 89hpes5t5,
-		 89hpes6t5, 89hpes8t5, 89hpes8t5a, 89hpes24t6, 89hpes6t6g2,
-		 89hpes24t6g2, 89hpes16t7, 89hpes32t8, 89hpes32t8g2,
-		 89hpes48t12, 89hpes48t12g2.
-  - reg :	 I2C address of the IDT 89HPESx device.
-
-Optionally there can be EEPROM-compatible subnode:
-  - compatible:  There are five EEPROM devices supported: 24c32, 24c64, 24c128,
-		 24c256 and 24c512 differed by size.
-  - reg:         Custom address of EEPROM device (If not specified IDT 89HPESx
-    (optional)	 device will try to communicate with EEPROM sited by default
-		 address - 0x50)
-  - read-only :	 Parameterless property disables writes to the EEPROM
-    (optional)
-
-Example:
-	idt@60 {
-		compatible = "idt,89hpes32nt8ag2";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eeprom@50 {
-			compatible = "onsemi,24c64";
-			reg = <0x50>;
-			read-only;
-		};
-	};
-
diff --git a/dts/Bindings/misc/olpc,xo1.75-ec.yaml b/dts/Bindings/misc/olpc,xo1.75-ec.yaml
index b3c45c046b..e99342f268 100644
--- a/dts/Bindings/misc/olpc,xo1.75-ec.yaml
+++ b/dts/Bindings/misc/olpc,xo1.75-ec.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OLPC XO-1.75 Embedded Controller bindings
+title: OLPC XO-1.75 Embedded Controller
 
 description: |
   This binding describes the Embedded Controller acting as a SPI bus master
diff --git a/dts/Bindings/misc/qcom,fastrpc.yaml b/dts/Bindings/misc/qcom,fastrpc.yaml
index d7576f8ac9..1ab9588cdd 100644
--- a/dts/Bindings/misc/qcom,fastrpc.yaml
+++ b/dts/Bindings/misc/qcom,fastrpc.yaml
@@ -79,7 +79,7 @@ patternProperties:
 
       iommus:
         minItems: 1
-        maxItems: 2
+        maxItems: 3
 
       qcom,nsessions:
         $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/dts/Bindings/mmc/arasan,sdhci.yaml b/dts/Bindings/mmc/arasan,sdhci.yaml
index 83be9e93d2..4053de758d 100644
--- a/dts/Bindings/mmc/arasan,sdhci.yaml
+++ b/dts/Bindings/mmc/arasan,sdhci.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Device Tree Bindings for the Arasan SDHCI Controller
+title: Arasan SDHCI Controller
 
 maintainers:
   - Adrian Hunter <adrian.hunter@intel.com>
diff --git a/dts/Bindings/mmc/arm,pl18x.yaml b/dts/Bindings/mmc/arm,pl18x.yaml
index 1e69a5a424..1c96da04f0 100644
--- a/dts/Bindings/mmc/arm,pl18x.yaml
+++ b/dts/Bindings/mmc/arm,pl18x.yaml
@@ -95,7 +95,9 @@ properties:
       PIO (polled I/O) interrupt and occurs when the FIFO needs to be
       emptied as part of a bulk read from the card. Some variants have these
       two interrupts wired into the same line (logic OR) and in that case
-      only one interrupt may be provided.
+      only one interrupt may be provided. The interrupt-names property is
+      not used due to inconsistency of existing DTs regarding its content.
+    deprecated: false
     minItems: 1
     maxItems: 2
 
diff --git a/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
index dead421e17..c028039bc4 100644
--- a/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BRCMSTB/BMIPS SDHCI Controller binding
+title: Broadcom BRCMSTB/BMIPS SDHCI Controller
 
 maintainers:
   - Al Cooper <alcooperx@gmail.com>
diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.yaml b/dts/Bindings/mmc/fsl-imx-esdhc.yaml
index 29339d0196..dc6256f04b 100644
--- a/dts/Bindings/mmc/fsl-imx-esdhc.yaml
+++ b/dts/Bindings/mmc/fsl-imx-esdhc.yaml
@@ -50,11 +50,11 @@ properties:
           - const: fsl,imx8mm-usdhc
       - items:
           - enum:
+              - fsl,imx8dxl-usdhc
               - fsl,imx8qm-usdhc
           - const: fsl,imx8qxp-usdhc
       - items:
           - enum:
-              - fsl,imx8dxl-usdhc
               - fsl,imx8mm-usdhc
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
@@ -71,10 +71,15 @@ properties:
         deprecated: true
       - items:
           - enum:
+              - fsl,imx8dxl-usdhc
               - fsl,imx8qm-usdhc
           - const: fsl,imx8qxp-usdhc
           - const: fsl,imx7d-usdhc
         deprecated: true
+      - items:
+          - enum:
+              - fsl,imxrt1170-usdhc
+          - const: fsl,imxrt1050-usdhc
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/mmc/fujitsu,sdhci-fujitsu.yaml b/dts/Bindings/mmc/fujitsu,sdhci-fujitsu.yaml
new file mode 100644
index 0000000000..73d747e917
--- /dev/null
+++ b/dts/Bindings/mmc/fujitsu,sdhci-fujitsu.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fujitsu,sdhci-fujitsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu/Socionext SDHCI controller (F_SDH30)
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fujitsu,mb86s70-sdhci-3.0
+      - socionext,f-sdh30-e51-mmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  resets:
+    maxItems: 1
+
+  fujitsu,cmd-dat-delay-select:
+    type: boolean
+    description: |
+      Indicating that this host requires the CMD_DAT_DELAY control to be enabled
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    sdhci1: mmc@36600000 {
+        compatible = "fujitsu,mb86s70-sdhci-3.0";
+        reg = <0x36600000 0x1000>;
+        bus-width = <4>;
+        vqmmc-supply = <&vccq_sdhci1>;
+        clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+        clock-names = "iface", "core";
+    };
diff --git a/dts/Bindings/mmc/ingenic,mmc.yaml b/dts/Bindings/mmc/ingenic,mmc.yaml
index 2d10aedf2e..bb4e0be0c8 100644
--- a/dts/Bindings/mmc/ingenic,mmc.yaml
+++ b/dts/Bindings/mmc/ingenic,mmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs MMC Controller DT bindings
+title: Ingenic SoCs MMC Controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/dts/Bindings/mmc/microchip,dw-sparx5-sdhci.yaml
index 69ff065c9a..fa6cfe092f 100644
--- a/dts/Bindings/mmc/microchip,dw-sparx5-sdhci.yaml
+++ b/dts/Bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip Sparx5 Mobile Storage Host Controller Binding
+title: Microchip Sparx5 Mobile Storage Host Controller
 
 allOf:
   - $ref: "mmc-controller.yaml"
diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml
index 802e3ca8be..86c73fd825 100644
--- a/dts/Bindings/mmc/mmc-controller.yaml
+++ b/dts/Bindings/mmc/mmc-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MMC Controller Generic Binding
+title: MMC Controller Common Properties
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -293,7 +293,6 @@ properties:
     description:
       SDIO only. Preserves card power during a suspend/resume cycle.
 
-  # Deprecated: enable-sdio-wakeup
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/dts/Bindings/mmc/mmc-pwrseq-emmc.yaml b/dts/Bindings/mmc/mmc-pwrseq-emmc.yaml
index 1fc7e620f3..911a5996e0 100644
--- a/dts/Bindings/mmc/mmc-pwrseq-emmc.yaml
+++ b/dts/Bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple eMMC hardware reset provider binding
+title: Simple eMMC hardware reset provider
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/dts/Bindings/mmc/mmc-pwrseq-sd8787.yaml b/dts/Bindings/mmc/mmc-pwrseq-sd8787.yaml
index 9e23967510..3397dbff88 100644
--- a/dts/Bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ b/dts/Bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-sd8787.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell SD8787 power sequence provider binding
+title: Marvell SD8787 power sequence provider
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/dts/Bindings/mmc/mmc-pwrseq-simple.yaml b/dts/Bindings/mmc/mmc-pwrseq-simple.yaml
index 226fb19191..64e3644eef 100644
--- a/dts/Bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/dts/Bindings/mmc/mmc-pwrseq-simple.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple MMC power sequence provider binding
+title: Simple MMC power sequence provider
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/dts/Bindings/mmc/mtk-sd.yaml b/dts/Bindings/mmc/mtk-sd.yaml
index d8e1e2e9ad..7a649ebc68 100644
--- a/dts/Bindings/mmc/mtk-sd.yaml
+++ b/dts/Bindings/mmc/mtk-sd.yaml
@@ -4,15 +4,12 @@
 $id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MTK MSDC Storage Host Controller Binding
+title: MTK MSDC Storage Host Controller
 
 maintainers:
   - Chaotian Jing <chaotian.jing@mediatek.com>
   - Wenbin Mei <wenbin.mei@mediatek.com>
 
-allOf:
-  - $ref: mmc-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -23,6 +20,7 @@ properties:
           - mediatek,mt6795-mmc
           - mediatek,mt7620-mmc
           - mediatek,mt7622-mmc
+          - mediatek,mt7986-mmc
           - mediatek,mt8135-mmc
           - mediatek,mt8173-mmc
           - mediatek,mt8183-mmc
@@ -48,27 +46,11 @@ properties:
     description:
       Should contain phandle for the clock feeding the MMC controller.
     minItems: 2
-    items:
-      - description: source clock (required).
-      - description: HCLK which used for host (required).
-      - description: independent source clock gate (required for MT2712).
-      - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
-      - description: msdc subsys clock gate (required for MT8192).
-      - description: peripheral bus clock gate (required for MT8192).
-      - description: AXI bus clock gate (required for MT8192).
-      - description: AHB bus clock gate (required for MT8192).
+    maxItems: 7
 
   clock-names:
     minItems: 2
-    items:
-      - const: source
-      - const: hclk
-      - const: source_cg
-      - const: bus_clk
-      - const: sys_cg
-      - const: pclk_cg
-      - const: axi_cg
-      - const: ahb_cg
+    maxItems: 7
 
   interrupts:
     description:
@@ -190,15 +172,144 @@ required:
   - vmmc-supply
   - vqmmc-supply
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: mediatek,mt8183-mmc
-then:
-  properties:
-    reg:
-      minItems: 2
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt2701-mmc
+            - mediatek,mt6779-mmc
+            - mediatek,mt6795-mmc
+            - mediatek,mt7620-mmc
+            - mediatek,mt7622-mmc
+            - mediatek,mt7623-mmc
+            - mediatek,mt8135-mmc
+            - mediatek,mt8173-mmc
+            - mediatek,mt8183-mmc
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+            - mediatek,mt8516-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+        clock-names:
+          minItems: 2
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mmc
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+            - description: msdc subsys clock gate
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+            - const: sys_cg
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: crypto clock used for data encrypt/decrypt (optional)
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: crypto
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8192-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: msdc subsys clock gate
+            - description: peripheral bus clock gate
+            - description: AXI bus clock gate
+            - description: AHB bus clock gate
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: sys_cg
+            - const: pclk_cg
+            - const: axi_cg
+            - const: ahb_cg
 
 unevaluatedProperties: false
 
diff --git a/dts/Bindings/mmc/renesas,sdhi.yaml b/dts/Bindings/mmc/renesas,sdhi.yaml
index 0424b06cb6..7bfb10c625 100644
--- a/dts/Bindings/mmc/renesas,sdhi.yaml
+++ b/dts/Bindings/mmc/renesas,sdhi.yaml
@@ -64,6 +64,7 @@ properties:
           - enum:
               - renesas,sdhi-r8a779a0  # R-Car V3U
               - renesas,sdhi-r8a779f0  # R-Car S4-8
+              - renesas,sdhi-r8a779g0  # R-Car V4H
           - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
diff --git a/dts/Bindings/mmc/rockchip-dw-mshc.yaml b/dts/Bindings/mmc/rockchip-dw-mshc.yaml
index 95f59a5e35..c7e14b7dba 100644
--- a/dts/Bindings/mmc/rockchip-dw-mshc.yaml
+++ b/dts/Bindings/mmc/rockchip-dw-mshc.yaml
@@ -71,6 +71,9 @@ properties:
       to control the clock phases, "ciu-sample" is required for tuning
       high speed modes.
 
+  power-domains:
+    maxItems: 1
+
   rockchip,default-sample-phase:
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
diff --git a/dts/Bindings/mmc/sdhci-am654.yaml b/dts/Bindings/mmc/sdhci-am654.yaml
index ea9121fb18..676a746953 100644
--- a/dts/Bindings/mmc/sdhci-am654.yaml
+++ b/dts/Bindings/mmc/sdhci-am654.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/sdhci-am654.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI AM654 MMC Controller
 
@@ -11,17 +11,18 @@ maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
 
 allOf:
-  - $ref: mmc-controller.yaml#
+  - $ref: sdhci-common.yaml#
 
 properties:
   compatible:
     oneOf:
-      - const: ti,am654-sdhci-5.1
-      - const: ti,j721e-sdhci-8bit
-      - const: ti,j721e-sdhci-4bit
-      - const: ti,am64-sdhci-8bit
-      - const: ti,am64-sdhci-4bit
-      - const: ti,am62-sdhci
+      - enum:
+          - ti,am62-sdhci
+          - ti,am64-sdhci-4bit
+          - ti,am64-sdhci-8bit
+          - ti,am654-sdhci-5.1
+          - ti,j721e-sdhci-4bit
+          - ti,j721e-sdhci-8bit
       - items:
           - const: ti,j7200-sdhci-8bit
           - const: ti,j721e-sdhci-8bit
@@ -49,8 +50,6 @@ properties:
       - const: clk_ahb
       - const: clk_xin
 
-  sdhci-caps-mask: true
-
   dma-coherent:
     type: boolean
 
@@ -61,67 +60,67 @@ properties:
 
   ti,otap-del-sel-legacy:
     description: Output tap delay for SD/MMC legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-mmc-hs:
     description: Output tap delay for MMC high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sd-hs:
     description: Output tap delay for SD high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr12:
     description: Output tap delay for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr25:
     description: Output tap delay for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr50:
     description: Output tap delay for SD UHS SDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr104:
     description: Output tap delay for SD UHS SDR104 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-ddr50:
     description: Output tap delay for SD UHS DDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-ddr52:
     description: Output tap delay for eMMC DDR52 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-hs200:
     description: Output tap delay for eMMC HS200 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-hs400:
     description: Output tap delay for eMMC HS400 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
@@ -131,49 +130,55 @@ properties:
 
   ti,itap-del-sel-legacy:
     description: Input tap delay for SD/MMC legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-mmc-hs:
     description: Input tap delay for MMC high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sd-hs:
     description: Input tap delay for SD high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sdr12:
     description: Input tap delay for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sdr25:
     description: Input tap delay for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-ddr50:
+    description: Input tap delay for MMC DDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-ddr52:
     description: Input tap delay for MMC DDR52 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,trm-icp:
     description: DLL trim select
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,driver-strength-ohm:
     description: DLL drive strength in ohms
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 33
       - 40
@@ -183,11 +188,11 @@ properties:
 
   ti,strobe-sel:
     description: strobe select delay for HS400 speed mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,clkbuf-sel:
     description: Clock Delay Buffer Select
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,fails-without-test-cd:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/dts/Bindings/mmc/sdhci-common.yaml b/dts/Bindings/mmc/sdhci-common.yaml
new file mode 100644
index 0000000000..1664615187
--- /dev/null
+++ b/dts/Bindings/mmc/sdhci-common.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SDHCI Controller Common Properties
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+
+description:
+  Common properties present on Secure Digital Host Controller Interface (SDHCI)
+  devices.
+
+properties:
+  sdhci-caps:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Additionally present SDHCI capabilities - values for SDHCI_CAPABILITIES
+      and SDHCI_CAPABILITIES_1 registers.
+
+  sdhci-caps-mask:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Masked SDHCI capabilities to remove from SDHCI_CAPABILITIES and
+      SDHCI_CAPABILITIES_1 registers.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+additionalProperties: true
diff --git a/dts/Bindings/mmc/sdhci-fujitsu.txt b/dts/Bindings/mmc/sdhci-fujitsu.txt
deleted file mode 100644
index 3ee9263adf..0000000000
--- a/dts/Bindings/mmc/sdhci-fujitsu.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Fujitsu SDHCI controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci_f_sdh30 driver.
-
-Required properties:
-- compatible: "fujitsu,mb86s70-sdhci-3.0"
-- clocks: Must contain an entry for each entry in clock-names. It is a
-  list of phandles and clock-specifier pairs.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Should contain the following two entries:
-	"iface" - clock used for sdhci interface
-	"core"  - core clock for sdhci controller
-
-Optional properties:
-- vqmmc-supply: phandle to the regulator device tree node, mentioned
-  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
-- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
-  requires the CMD_DAT_DELAY control to be enabled.
-
-Example:
-
-	sdhci1: mmc@36600000 {
-		compatible = "fujitsu,mb86s70-sdhci-3.0";
-		reg = <0 0x36600000 0x1000>;
-		interrupts = <0 172 0x4>,
-			     <0 173 0x4>;
-		bus-width = <4>;
-		vqmmc-supply = <&vccq_sdhci1>;
-		clocks = <&clock 2 2 0>, <&clock 2 3 0>;
-		clock-names = "iface", "core";
-	};
diff --git a/dts/Bindings/mmc/sdhci-msm.yaml b/dts/Bindings/mmc/sdhci-msm.yaml
index a96f143479..6b89238f05 100644
--- a/dts/Bindings/mmc/sdhci-msm.yaml
+++ b/dts/Bindings/mmc/sdhci-msm.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/sdhci-msm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm SDHCI controller (sdhci-msm)
 
@@ -26,6 +25,7 @@ properties:
               - qcom,msm8226-sdhci
               - qcom,msm8953-sdhci
               - qcom,msm8974-sdhci
+              - qcom,msm8976-sdhci
               - qcom,msm8916-sdhci
               - qcom,msm8992-sdhci
               - qcom,msm8994-sdhci
@@ -45,9 +45,12 @@ properties:
               - qcom,sm6115-sdhci
               - qcom,sm6125-sdhci
               - qcom,sm6350-sdhci
+              - qcom,sm6375-sdhci
               - qcom,sm8150-sdhci
               - qcom,sm8250-sdhci
+              - qcom,sm8350-sdhci
               - qcom,sm8450-sdhci
+              - qcom,sm8550-sdhci
           - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
 
   reg:
@@ -80,6 +83,8 @@ properties:
       - const: cal
       - const: sleep
 
+  dma-coherent: true
+
   interrupts:
     maxItems: 2
 
@@ -133,16 +138,6 @@ properties:
     description: A phandle to sdhci power domain node
     maxItems: 1
 
-  mmc-ddr-1_8v: true
-
-  mmc-hs200-1_8v: true
-
-  mmc-hs400-1_8v: true
-
-  bus-width: true
-
-  max-frequency: true
-
   operating-points-v2: true
 
 patternProperties:
@@ -165,7 +160,7 @@ required:
   - interrupts
 
 allOf:
-  - $ref: mmc-controller.yaml#
+  - $ref: sdhci-common.yaml#
 
   - if:
       properties:
diff --git a/dts/Bindings/mmc/sdhci-pxa.yaml b/dts/Bindings/mmc/sdhci-pxa.yaml
index 1c87f4218e..3d46c25257 100644
--- a/dts/Bindings/mmc/sdhci-pxa.yaml
+++ b/dts/Bindings/mmc/sdhci-pxa.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell PXA SDHCI v2/v3 bindings
+title: Marvell PXA SDHCI v2/v3
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml b/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml
index 71f8e726d6..a43eb837f8 100644
--- a/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/snps,dwcmshc-sdhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Synopsys Designware Mobile Storage Host Controller Binding
+title: Synopsys Designware Mobile Storage Host Controller
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -45,6 +45,17 @@ properties:
       - const: block
       - const: timer
 
+  resets:
+    maxItems: 5
+
+  reset-names:
+    items:
+      - const: core
+      - const: bus
+      - const: axi
+      - const: block
+      - const: timer
+
   rockchip,txclk-tapnum:
     description: Specify the number of delay for tx sampling.
     $ref: /schemas/types.yaml#/definitions/uint8
diff --git a/dts/Bindings/mmc/sunplus,mmc.yaml b/dts/Bindings/mmc/sunplus,mmc.yaml
new file mode 100644
index 0000000000..23aa8e6b2d
--- /dev/null
+++ b/dts/Bindings/mmc/sunplus,mmc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Ltd. Co. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sunplus,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus MMC Controller
+
+maintainers:
+  - Tony Huang <tonyhuang.sunplus@gmail.com>
+  - Li-hao Kuo <lhjeff911@gmail.com>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+properties:
+  compatible:
+    enum:
+      - sunplus,sp7021-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mmc0: mmc@9c003b00 {
+        compatible = "sunplus,sp7021-mmc";
+        reg = <0x9c003b00 0x180>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x4e>;
+        resets = <&rstc 0x3e>;
+        bus-width = <8>;
+        max-frequency = <52000000>;
+        non-removable;
+        disable-wp;
+        cap-mmc-highspeed;
+        mmc-ddr-3_3v;
+        no-sdio;
+        no-sd;
+    };
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.yaml b/dts/Bindings/mmc/synopsys-dw-mshc.yaml
index ae6d6fca79..b13b5166d2 100644
--- a/dts/Bindings/mmc/synopsys-dw-mshc.yaml
+++ b/dts/Bindings/mmc/synopsys-dw-mshc.yaml
@@ -4,10 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Synopsys Designware Mobile Storage Host Controller Binding
-
-allOf:
-  - $ref: "synopsys-dw-mshc-common.yaml#"
+title: Synopsys Designware Mobile Storage Host Controller
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -38,6 +35,35 @@ properties:
       - const: biu
       - const: ciu
 
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the sysmgr node
+          - description: register offset that controls the SDMMC clock phase
+          - description: register shift for the smplsel(drive in) setting
+    description:
+      This property is optional. Contains the phandle to System Manager block
+      that contains the SDMMC clock-phase control register. The first value is
+      the pointer to the sysmgr, the 2nd value is the register offset for the
+      SDMMC clock phase register, and the 3rd value is the bit shift for the
+      smplsel(drive in) setting.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-dw-mshc
+    then:
+      properties:
+        altr,sysmgr-syscon: true
+    else:
+      properties:
+        altr,sysmgr-syscon: false
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml b/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml
index 4741864da4..e7ec0c59bc 100644
--- a/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -14,9 +14,6 @@ maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     enum:
       - allwinner,sun4i-a10-nand
@@ -49,12 +46,8 @@ properties:
   dma-names:
     const: rxtx
 
-  pinctrl-names: true
-
 patternProperties:
-  "^pinctrl-[0-9]+$": true
-
-  "^nand@[a-f0-9]+$":
+  "^nand@[a-f0-9]$":
     type: object
     properties:
       reg:
@@ -91,6 +84,29 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun6i-rtc.h>
+    #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+    #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+    nand-controller@1c03000 {
+        compatible = "allwinner,sun8i-a23-nand-controller";
+        reg = <0x01c03000 0x1000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+        clock-names = "ahb", "mod";
+        resets = <&ccu RST_BUS_NAND>;
+        reset-names = "ahb";
+        dmas = <&dma 5>;
+        dma-names = "rxtx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
 ...
diff --git a/dts/Bindings/mtd/arasan,nand-controller.yaml b/dts/Bindings/mtd/arasan,nand-controller.yaml
index f013fb976d..d028269cdb 100644
--- a/dts/Bindings/mtd/arasan,nand-controller.yaml
+++ b/dts/Bindings/mtd/arasan,nand-controller.yaml
@@ -35,9 +35,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  "#address-cells": true
-  "#size-cells": true
-
 required:
   - compatible
   - reg
@@ -45,7 +42,7 @@ required:
   - clock-names
   - interrupts
 
-additionalProperties: true
+unevaluatedProperties: true
 
 examples:
   - |
diff --git a/dts/Bindings/mtd/arm,pl353-nand-r2p1.yaml b/dts/Bindings/mtd/arm,pl353-nand-r2p1.yaml
index 023f3ef0fa..e552875040 100644
--- a/dts/Bindings/mtd/arm,pl353-nand-r2p1.yaml
+++ b/dts/Bindings/mtd/arm,pl353-nand-r2p1.yaml
@@ -34,20 +34,20 @@ unevaluatedProperties: false
 examples:
   - |
     smcc: memory-controller@e000e000 {
-      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-      reg = <0xe000e000 0x0001000>;
-      clock-names = "memclk", "apb_pclk";
-      clocks = <&clkc 11>, <&clkc 44>;
-      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
-                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
-                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
-      #address-cells = <2>;
-      #size-cells = <1>;
-
-      nfc0: nand-controller@0,0 {
-        compatible = "arm,pl353-nand-r2p1";
-        reg = <0 0 0x1000000>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-      };
+        compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+        reg = <0xe000e000 0x0001000>;
+        clock-names = "memclk", "apb_pclk";
+        clocks = <&clkc 11>, <&clkc 44>;
+        ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        nfc0: nand-controller@0,0 {
+            compatible = "arm,pl353-nand-r2p1";
+            reg = <0 0 0x1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
     };
diff --git a/dts/Bindings/mtd/atmel-nand.txt b/dts/Bindings/mtd/atmel-nand.txt
index 3aa297c97a..50645828ac 100644
--- a/dts/Bindings/mtd/atmel-nand.txt
+++ b/dts/Bindings/mtd/atmel-nand.txt
@@ -45,10 +45,8 @@ Optional properties:
 - atmel,rb: an integer identifying the native Ready/Busy pin. Only meaningful
 	    on sama5 SoCs.
 
-All generic properties described in
-Documentation/devicetree/bindings/mtd/{common,nand}.txt also apply to the NAND
-device node, and NAND partitions should be defined under the NAND node as
-described in Documentation/devicetree/bindings/mtd/partition.txt.
+All generic properties are described in the generic yaml files under
+Documentation/devicetree/bindings/mtd/.
 
 * ECC engine (PMECC) bindings:
 
diff --git a/dts/Bindings/mtd/brcm,brcmnand.yaml b/dts/Bindings/mtd/brcm,brcmnand.yaml
index dd5a64969e..1571024aa1 100644
--- a/dts/Bindings/mtd/brcm,brcmnand.yaml
+++ b/dts/Bindings/mtd/brcm,brcmnand.yaml
@@ -86,15 +86,15 @@ properties:
     minItems: 1
     items:
       - description: NAND CTLRDY interrupt
-      - description: FLASH_DMA_DONE if flash DMA is available
-      - description: FLASH_EDU_DONE if EDU is available
+      - description: FLASH_DMA_DONE (if flash DMA is available) or FLASH_EDU_DONE (if EDU is available)
 
   interrupt-names:
     minItems: 1
     items:
       - const: nand_ctlrdy
-      - const: flash_dma_done
-      - const: flash_edu_done
+      - enum:
+          - flash_dma_done
+          - flash_edu_done
 
   clocks:
     maxItems: 1
@@ -173,6 +173,13 @@ allOf:
             - const: nand
             - const: iproc-idm
             - const: iproc-ext
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+    then:
+      required:
+        - interrupt-names
 
 unevaluatedProperties: false
 
@@ -184,51 +191,52 @@ required:
 examples:
   - |
     nand-controller@f0442800 {
-            compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
-            reg = <0xf0442800 0x600>,
-                  <0xf0443000 0x100>;
-            reg-names = "nand", "flash-dma";
-            interrupt-parent = <&hif_intr2_intc>;
-            interrupts = <24>, <4>;
+        compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
+        reg = <0xf0442800 0x600>,
+              <0xf0443000 0x100>;
+        reg-names = "nand", "flash-dma";
+        interrupt-parent = <&hif_intr2_intc>;
+        interrupts = <24>, <4>;
+        interrupt-names = "nand_ctlrdy", "flash_dma_done";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@1 {
+            compatible = "brcm,nandcs";
+            reg = <1>; // Chip select 1
+            nand-on-flash-bbt;
+            nand-ecc-strength = <12>;
+            nand-ecc-step-size = <512>;
 
             #address-cells = <1>;
-            #size-cells = <0>;
-
-            nand@1 {
-                    compatible = "brcm,nandcs";
-                    reg = <1>; // Chip select 1
-                    nand-on-flash-bbt;
-                    nand-ecc-strength = <12>;
-                    nand-ecc-step-size = <512>;
-
-                    #address-cells = <1>;
-                    #size-cells = <1>;
-            };
+            #size-cells = <1>;
+        };
     };
   - |
     nand-controller@10000200 {
-            compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
-                         "brcm,brcmnand-v4.0", "brcm,brcmnand";
-            reg = <0x10000200 0x180>,
-                  <0x100000b0 0x10>,
-                  <0x10000600 0x200>;
-            reg-names = "nand", "nand-int-base", "nand-cache";
-            interrupt-parent = <&periph_intc>;
-            interrupts = <50>;
-            clocks = <&periph_clk 20>;
-            clock-names = "nand";
+        compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
+                     "brcm,brcmnand-v4.0", "brcm,brcmnand";
+        reg = <0x10000200 0x180>,
+              <0x100000b0 0x10>,
+              <0x10000600 0x200>;
+        reg-names = "nand", "nand-int-base", "nand-cache";
+        interrupt-parent = <&periph_intc>;
+        interrupts = <50>;
+        clocks = <&periph_clk 20>;
+        clock-names = "nand";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            compatible = "brcm,nandcs";
+            reg = <0>;
+            nand-on-flash-bbt;
+            nand-ecc-strength = <1>;
+            nand-ecc-step-size = <512>;
 
             #address-cells = <1>;
-            #size-cells = <0>;
-
-            nand@0 {
-                    compatible = "brcm,nandcs";
-                    reg = <0>;
-                    nand-on-flash-bbt;
-                    nand-ecc-strength = <1>;
-                    nand-ecc-step-size = <512>;
-
-                    #address-cells = <1>;
-                    #size-cells = <1>;
-            };
+            #size-cells = <1>;
+        };
     };
diff --git a/dts/Bindings/mtd/denali,nand.yaml b/dts/Bindings/mtd/denali,nand.yaml
index 1307ed7e7f..0be83ad429 100644
--- a/dts/Bindings/mtd/denali,nand.yaml
+++ b/dts/Bindings/mtd/denali,nand.yaml
@@ -145,6 +145,6 @@ examples:
         #size-cells = <0>;
 
         nand@0 {
-                reg = <0>;
+            reg = <0>;
         };
     };
diff --git a/dts/Bindings/mtd/gpmi-nand.yaml b/dts/Bindings/mtd/gpmi-nand.yaml
index 849aeae319..8487089b6e 100644
--- a/dts/Bindings/mtd/gpmi-nand.yaml
+++ b/dts/Bindings/mtd/gpmi-nand.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale General-Purpose Media Interface (GPMI) binding
+title: Freescale General-Purpose Media Interface (GPMI)
 
 maintainers:
   - Han Xu <han.xu@nxp.com>
diff --git a/dts/Bindings/mtd/ingenic,nand.yaml b/dts/Bindings/mtd/ingenic,nand.yaml
index 8c272c842b..a7bdb5d367 100644
--- a/dts/Bindings/mtd/ingenic,nand.yaml
+++ b/dts/Bindings/mtd/ingenic,nand.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs NAND controller devicetree bindings
+title: Ingenic SoCs NAND controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -32,9 +32,9 @@ properties:
 
   partitions:
     type: object
+    deprecated: true
     description:
       Node containing description of fixed partitions.
-      See Documentation/devicetree/bindings/mtd/partition.txt
 
 patternProperties:
   "^nand@[a-f0-9]$":
@@ -58,78 +58,78 @@ examples:
   - |
     #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     memory-controller@13410000 {
-      compatible = "ingenic,jz4780-nemc";
-      reg = <0x13410000 0x10000>;
-      #address-cells = <2>;
-      #size-cells = <1>;
-      ranges = <1 0 0x1b000000 0x1000000>,
-         <2 0 0x1a000000 0x1000000>,
-         <3 0 0x19000000 0x1000000>,
-         <4 0 0x18000000 0x1000000>,
-         <5 0 0x17000000 0x1000000>,
-         <6 0 0x16000000 0x1000000>;
-
-      clocks = <&cgu JZ4780_CLK_NEMC>;
-
-      nand-controller@1 {
-        compatible = "ingenic,jz4780-nand";
-        reg = <1 0 0x1000000>;
-
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ecc-engine = <&bch>;
-
-        ingenic,nemc-tAS = <10>;
-        ingenic,nemc-tAH = <5>;
-        ingenic,nemc-tBP = <10>;
-        ingenic,nemc-tAW = <15>;
-        ingenic,nemc-tSTRV = <100>;
-
-        pinctrl-names = "default";
-        pinctrl-0 = <&pins_nemc>;
-
-        nand@1 {
-          reg = <1>;
-
-          nand-ecc-step-size = <1024>;
-          nand-ecc-strength = <24>;
-          nand-ecc-mode = "hw";
-          nand-on-flash-bbt;
-
-          pinctrl-names = "default";
-          pinctrl-0 = <&pins_nemc_cs1>;
-
-          partitions {
-            compatible = "fixed-partitions";
-            #address-cells = <2>;
-            #size-cells = <2>;
-
-            partition@0 {
-              label = "u-boot-spl";
-              reg = <0x0 0x0 0x0 0x800000>;
+        compatible = "ingenic,jz4780-nemc";
+        reg = <0x13410000 0x10000>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <1 0 0x1b000000 0x1000000>,
+                 <2 0 0x1a000000 0x1000000>,
+                 <3 0 0x19000000 0x1000000>,
+                 <4 0 0x18000000 0x1000000>,
+                 <5 0 0x17000000 0x1000000>,
+                 <6 0 0x16000000 0x1000000>;
+
+        clocks = <&cgu JZ4780_CLK_NEMC>;
+
+        nand-controller@1 {
+            compatible = "ingenic,jz4780-nand";
+            reg = <1 0 0x1000000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ecc-engine = <&bch>;
+
+            ingenic,nemc-tAS = <10>;
+            ingenic,nemc-tAH = <5>;
+            ingenic,nemc-tBP = <10>;
+            ingenic,nemc-tAW = <15>;
+            ingenic,nemc-tSTRV = <100>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pins_nemc>;
+
+            nand@1 {
+                reg = <1>;
+
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+                nand-ecc-mode = "hw";
+                nand-on-flash-bbt;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pins_nemc_cs1>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <2>;
+                    #size-cells = <2>;
+
+                    partition@0 {
+                        label = "u-boot-spl";
+                        reg = <0x0 0x0 0x0 0x800000>;
+                    };
+
+                    partition@800000 {
+                        label = "u-boot";
+                        reg = <0x0 0x800000 0x0 0x200000>;
+                    };
+
+                    partition@a00000 {
+                        label = "u-boot-env";
+                        reg = <0x0 0xa00000 0x0 0x200000>;
+                    };
+
+                    partition@c00000 {
+                        label = "boot";
+                        reg = <0x0 0xc00000 0x0 0x4000000>;
+                    };
+
+                    partition@4c00000 {
+                        label = "system";
+                        reg = <0x0 0x4c00000 0x1 0xfb400000>;
+                    };
+                };
             };
-
-            partition@800000 {
-              label = "u-boot";
-              reg = <0x0 0x800000 0x0 0x200000>;
-            };
-
-            partition@a00000 {
-              label = "u-boot-env";
-              reg = <0x0 0xa00000 0x0 0x200000>;
-            };
-
-            partition@c00000 {
-              label = "boot";
-              reg = <0x0 0xc00000 0x0 0x4000000>;
-            };
-
-            partition@4c00000 {
-              label = "system";
-              reg = <0x0 0x4c00000 0x1 0xfb400000>;
-            };
-          };
         };
-      };
     };
diff --git a/dts/Bindings/mtd/intel,lgm-ebunand.yaml b/dts/Bindings/mtd/intel,lgm-ebunand.yaml
index 741c66ee06..8c62c7d3d0 100644
--- a/dts/Bindings/mtd/intel,lgm-ebunand.yaml
+++ b/dts/Bindings/mtd/intel,lgm-ebunand.yaml
@@ -39,14 +39,8 @@ properties:
       - const: tx
       - const: rx
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
 patternProperties:
-  "^nand@[a-f0-9]+$":
+  "^nand@[a-f0-9]$":
     type: object
     properties:
       reg:
@@ -67,33 +61,31 @@ required:
   - clocks
   - dmas
   - dma-names
-  - "#address-cells"
-  - "#size-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     nand-controller@e0f00000 {
-      compatible = "intel,lgm-ebunand";
-      reg = <0xe0f00000 0x100>,
-            <0xe1000000 0x300>,
-            <0xe1400000 0x8000>,
-            <0xe1c00000 0x1000>,
-            <0x17400000 0x4>,
-            <0x17c00000 0x4>;
-      reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1",
-        "addr_sel0", "addr_sel1";
-      clocks = <&cgu0 125>;
-      dmas = <&dma0 8>, <&dma0 9>;
-      dma-names = "tx", "rx";
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      nand@0 {
-        reg = <0>;
-        nand-ecc-mode = "hw";
-      };
+        compatible = "intel,lgm-ebunand";
+        reg = <0xe0f00000 0x100>,
+              <0xe1000000 0x300>,
+              <0xe1400000 0x8000>,
+              <0xe1c00000 0x1000>,
+              <0x17400000 0x4>,
+              <0x17c00000 0x4>;
+        reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1",
+                    "addr_sel0", "addr_sel1";
+        clocks = <&cgu0 125>;
+        dmas = <&dma0 8>, <&dma0 9>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-ecc-mode = "hw";
+        };
     };
 
 ...
diff --git a/dts/Bindings/mtd/jedec,spi-nor.yaml b/dts/Bindings/mtd/jedec,spi-nor.yaml
index 7149784a36..3fe981b14e 100644
--- a/dts/Bindings/mtd/jedec,spi-nor.yaml
+++ b/dts/Bindings/mtd/jedec,spi-nor.yaml
@@ -70,24 +70,17 @@ properties:
       be used on such systems, to denote the absence of a reliable reset
       mechanism.
 
-  partitions:
-    type: object
-
-  '#address-cells': true
-  '#size-cells': true
-
-patternProperties:
-  # Note: use 'partitions' node for new users
-  '^partition@':
-    type: object
-
-  "^otp(-[0-9]+)?$":
-    type: object
+  reset-gpios:
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      If "broken-flash-reset" is present then having this property does not
+      make any difference.
 
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -97,6 +90,7 @@ examples:
             reg = <0>;
             spi-max-frequency = <40000000>;
             m25p,fast-read;
+            reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
         };
     };
 ...
diff --git a/dts/Bindings/mtd/lpc32xx-mlc.txt b/dts/Bindings/mtd/lpc32xx-mlc.txt
index 6d60bc3063..64c06aa05a 100644
--- a/dts/Bindings/mtd/lpc32xx-mlc.txt
+++ b/dts/Bindings/mtd/lpc32xx-mlc.txt
@@ -19,7 +19,7 @@ accuracy:)
 - nxp,wr_low: WR_LOW
 
 Optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
 
 Example:
 
diff --git a/dts/Bindings/mtd/lpc32xx-slc.txt b/dts/Bindings/mtd/lpc32xx-slc.txt
index d94edc0fc5..39f17630a3 100644
--- a/dts/Bindings/mtd/lpc32xx-slc.txt
+++ b/dts/Bindings/mtd/lpc32xx-slc.txt
@@ -20,7 +20,7 @@ clock speed:)
 - nxp,rsetup: Read setup time (R_SETUP)
 
 Optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
 
 Example:
 
diff --git a/dts/Bindings/mtd/microchip,mchp48l640.yaml b/dts/Bindings/mtd/microchip,mchp48l640.yaml
index 8cc2a7ceb5..00882892f4 100644
--- a/dts/Bindings/mtd/microchip,mchp48l640.yaml
+++ b/dts/Bindings/mtd/microchip,mchp48l640.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Microchip 48l640 (and similar) serial EERAM bindings
+title: Microchip 48l640 (and similar) serial EERAM
 
 maintainers:
   - Heiko Schocher <hs@denx.de>
@@ -34,13 +34,13 @@ unevaluatedProperties: false
 examples:
   - |
     spi {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      eeram@0 {
-        compatible = "microchip,48l640";
-        reg = <0>;
-        spi-max-frequency = <20000000>;
-      };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeram@0 {
+            compatible = "microchip,48l640";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+        };
     };
 ...
diff --git a/dts/Bindings/mtd/mtd-physmap.yaml b/dts/Bindings/mtd/mtd-physmap.yaml
index 82eb4e0f45..5df94953c3 100644
--- a/dts/Bindings/mtd/mtd-physmap.yaml
+++ b/dts/Bindings/mtd/mtd-physmap.yaml
@@ -13,6 +13,9 @@ description: |
   Flash chips (Memory Technology Devices) are often used for solid state
   file systems on embedded devices.
 
+allOf:
+  - $ref: "mtd.yaml#"
+
 properties:
   compatible:
     oneOf:
@@ -121,10 +124,6 @@ properties:
   big-endian: true
   little-endian: true
 
-patternProperties:
-  '@[0-9a-f]+$':
-    $ref: partitions/partition.yaml
-
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/mtd/mtd.yaml b/dts/Bindings/mtd/mtd.yaml
index 3498e48567..78da129e99 100644
--- a/dts/Bindings/mtd/mtd.yaml
+++ b/dts/Bindings/mtd/mtd.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^flash(@.*)?$"
+    pattern: "^(flash|.*sram)(@.*)?$"
 
   label:
     description:
@@ -21,9 +21,28 @@ properties:
       based name) in order to ease flash device identification and/or
       describe what they are used for.
 
+  '#address-cells':
+    deprecated: true
+
+  '#size-cells':
+    deprecated: true
+
+  partitions:
+    $ref: /schemas/mtd/partitions/partitions.yaml
+
+    required:
+      - compatible
+
 patternProperties:
+  "@[0-9a-f]+$":
+    $ref: partitions/partition.yaml
+    deprecated: true
+
+  "^partition@[0-9a-f]+":
+    $ref: partitions/partition.yaml
+    deprecated: true
+
   "^otp(-[0-9]+)?$":
-    type: object
     $ref: ../nvmem/nvmem.yaml#
 
     description: |
@@ -40,6 +59,7 @@ patternProperties:
     required:
       - compatible
 
+# This is a generic file other binding inherit from
 additionalProperties: true
 
 examples:
diff --git a/dts/Bindings/mtd/mtk-nand.txt b/dts/Bindings/mtd/mtk-nand.txt
index 4d3ec5e4ff..839ea2f93d 100644
--- a/dts/Bindings/mtd/mtk-nand.txt
+++ b/dts/Bindings/mtd/mtk-nand.txt
@@ -131,7 +131,7 @@ Example:
 	};
 
 NAND chip optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
 
 Example:
 	nand@0 {
diff --git a/dts/Bindings/mtd/mxc-nand.yaml b/dts/Bindings/mtd/mxc-nand.yaml
index 66da1b476a..7f6f7c9596 100644
--- a/dts/Bindings/mtd/mxc-nand.yaml
+++ b/dts/Bindings/mtd/mxc-nand.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale's mxc_nand binding
+title: Freescale's mxc_nand
 
 maintainers:
   - Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/dts/Bindings/mtd/nand-chip.yaml b/dts/Bindings/mtd/nand-chip.yaml
index 97ac3a3fbb..33d079f76c 100644
--- a/dts/Bindings/mtd/nand-chip.yaml
+++ b/dts/Bindings/mtd/nand-chip.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/mtd/nand-chip.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NAND Chip and NAND Controller Generic Binding
+title: NAND Chip Common Properties
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
 
+allOf:
+  - $ref: "mtd.yaml#"
+
 description: |
   This file covers the generic description of a NAND chip. It implies that the
   bus interface should not be taken into account: both raw NAND devices and
@@ -67,4 +70,5 @@ properties:
 required:
   - reg
 
+# This file can be referenced by more specific devices (like spi-nands)
 additionalProperties: true
diff --git a/dts/Bindings/mtd/nand-controller.yaml b/dts/Bindings/mtd/nand-controller.yaml
index 359a015d4e..efcd415f86 100644
--- a/dts/Bindings/mtd/nand-controller.yaml
+++ b/dts/Bindings/mtd/nand-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NAND Chip and NAND Controller Generic Binding
+title: NAND Controller Common Properties
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
@@ -51,7 +51,6 @@ properties:
 
 patternProperties:
   "^nand@[a-f0-9]$":
-    type: object
     $ref: "nand-chip.yaml#"
 
     properties:
@@ -130,6 +129,7 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+# This is a generic file other binding inherit from and extend
 additionalProperties: true
 
 examples:
diff --git a/dts/Bindings/mtd/partition.txt b/dts/Bindings/mtd/partition.txt
deleted file mode 100644
index ead90e8274..0000000000
--- a/dts/Bindings/mtd/partition.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Flash partitions in device tree
-===============================
-
-Flash devices can be partitioned into one or more functional ranges (e.g. "boot
-code", "nvram", "kernel").
-
-Different devices may be partitioned in a different ways. Some may use a fixed
-flash layout set at production time. Some may use on-flash table that describes
-the geometry and naming/purpose of each functional region. It is also possible
-to see these methods mixed.
-
-To assist system software in locating partitions, we allow describing which
-method is used for a given flash device. To describe the method there should be
-a subnode of the flash device that is named 'partitions'. It must have a
-'compatible' property, which is used to identify the method to use.
-
-When a single partition is represented with a DT node (it depends on a used
-format) it may also be described using above rules ('compatible' and optionally
-some extra properties / subnodes). It allows describing more complex,
-hierarchical (multi-level) layouts and should be used if there is some
-significant relation between partitions or some partition internally uses
-another partitioning method.
-
-Available bindings are listed in the "partitions" subdirectory.
-
-
-Deprecated: partitions defined in flash node
-============================================
-
-For backwards compatibility partitions as direct subnodes of the flash device are
-supported. This use is discouraged.
-NOTE: also for backwards compatibility, direct subnodes that have a compatible
-string are not considered partitions, as they may be used for other bindings.
diff --git a/dts/Bindings/mtd/partitions/arm,arm-firmware-suite.yaml b/dts/Bindings/mtd/partitions/arm,arm-firmware-suite.yaml
index 76c88027b6..97618847ee 100644
--- a/dts/Bindings/mtd/partitions/arm,arm-firmware-suite.yaml
+++ b/dts/Bindings/mtd/partitions/arm,arm-firmware-suite.yaml
@@ -9,6 +9,8 @@ title: ARM Firmware Suite (AFS) Partitions
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
+select: false
+
 description: |
   The ARM Firmware Suite is a flash partitioning system found on the
   ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
diff --git a/dts/Bindings/mtd/partitions/brcm,bcm4908-partitions.yaml b/dts/Bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
index 7b113e5e34..5bbb1c01dd 100644
--- a/dts/Bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
+++ b/dts/Bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
@@ -17,6 +17,8 @@ description: |
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
+select: false
+
 properties:
   compatible:
     const: brcm,bcm4908-partitions
diff --git a/dts/Bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml b/dts/Bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
index 3484e06d6b..939e7b50db 100644
--- a/dts/Bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
+++ b/dts/Bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
@@ -35,6 +35,8 @@ description: |
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
+select: false
+
 properties:
   compatible:
     const: brcm,bcm947xx-cfe-partitions
diff --git a/dts/Bindings/mtd/partitions/fixed-partitions.yaml b/dts/Bindings/mtd/partitions/fixed-partitions.yaml
index ad3ccd2508..331e564f29 100644
--- a/dts/Bindings/mtd/partitions/fixed-partitions.yaml
+++ b/dts/Bindings/mtd/partitions/fixed-partitions.yaml
@@ -31,24 +31,17 @@ properties:
 
 patternProperties:
   "@[0-9a-f]+$":
-    allOf:
-      - $ref: "partition.yaml#"
-      - if:
-          properties:
-            compatible:
-              contains:
-                const: sercomm,sc-partitions
-        then:
-          properties:
-            sercomm,scpart-id:
-              description: Partition id in Sercomm partition map. Mtd
-                parser uses this id to find a record in the partition map
-                containing offset and size of the current partition. The
-                values from partition map overrides partition offset and
-                size defined in reg property of the dts. Frequently these
-                values are the same, but may differ if device has bad
-                eraseblocks on a flash.
-              $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: partition.yaml#
+
+    properties:
+      sercomm,scpart-id:
+        description: Partition id in Sercomm partition map. Mtd parser
+          uses this id to find a record in the partition map containing
+          offset and size of the current partition. The values from
+          partition map overrides partition offset and size defined in
+          reg property of the dts. Frequently these values are the same,
+          but may differ if device has bad eraseblocks on a flash.
+        $ref: /schemas/types.yaml#/definitions/uint32
 
 required:
   - "#address-cells"
@@ -84,6 +77,7 @@ examples:
         partition@0 {
             label = "filesystem";
             reg = <0x00000000 0x1 0x00000000>;
+            linux,rootfs;
         };
     };
 
diff --git a/dts/Bindings/mtd/partitions/linksys,ns-partitions.yaml b/dts/Bindings/mtd/partitions/linksys,ns-partitions.yaml
index 99249cdfbf..213858f603 100644
--- a/dts/Bindings/mtd/partitions/linksys,ns-partitions.yaml
+++ b/dts/Bindings/mtd/partitions/linksys,ns-partitions.yaml
@@ -18,6 +18,8 @@ description: |
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
+select: false
+
 properties:
   compatible:
     const: linksys,ns-partitions
diff --git a/dts/Bindings/mtd/partitions/nvmem-cells.yaml b/dts/Bindings/mtd/partitions/nvmem-cells.yaml
index 5cdd2efa91..5474d63268 100644
--- a/dts/Bindings/mtd/partitions/nvmem-cells.yaml
+++ b/dts/Bindings/mtd/partitions/nvmem-cells.yaml
@@ -17,6 +17,7 @@ maintainers:
   - Ansuel Smith <ansuelsmth@gmail.com>
 
 allOf:
+  - $ref: /schemas/mtd/partitions/partition.yaml#
   - $ref: /schemas/nvmem/nvmem.yaml#
 
 properties:
@@ -26,7 +27,7 @@ properties:
 required:
   - compatible
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
@@ -84,7 +85,6 @@ examples:
             compatible = "nvmem-cells";
             label = "calibration";
             reg = <0xf00000 0x100000>;
-            ranges = <0 0xf00000 0x100000>;
             #address-cells = <1>;
             #size-cells = <1>;
 
diff --git a/dts/Bindings/mtd/partitions/partition.yaml b/dts/Bindings/mtd/partitions/partition.yaml
index f1a02d840b..cdffbb9ced 100644
--- a/dts/Bindings/mtd/partitions/partition.yaml
+++ b/dts/Bindings/mtd/partitions/partition.yaml
@@ -52,6 +52,10 @@ properties:
       immune to paired-pages corruptions
     type: boolean
 
+  linux,rootfs:
+    description: Marks partition that contains root filesystem to mount and boot
+      user space from
+
 if:
   not:
     required: [ reg ]
@@ -60,4 +64,5 @@ then:
     $nodename:
       pattern: '^partition-.*$'
 
+# This is a generic file other binding inherit from and extend
 additionalProperties: true
diff --git a/dts/Bindings/mtd/partitions/partitions.yaml b/dts/Bindings/mtd/partitions/partitions.yaml
new file mode 100644
index 0000000000..9aca4e6c60
--- /dev/null
+++ b/dts/Bindings/mtd/partitions/partitions.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partitions
+
+description: |
+  This binding is generic and describes the content of the partitions container
+  node. All partition parsers must be referenced here.
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+oneOf:
+  - $ref: arm,arm-firmware-suite.yaml
+  - $ref: brcm,bcm4908-partitions.yaml
+  - $ref: brcm,bcm947xx-cfe-partitions.yaml
+  - $ref: fixed-partitions.yaml
+  - $ref: linksys,ns-partitions.yaml
+  - $ref: qcom,smem-part.yaml
+  - $ref: redboot-fis.yaml
+
+properties:
+  compatible: true
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    enum: [1, 2]
+
+patternProperties:
+  "partition(-.+|@[0-9a-f]+)":
+    $ref: partition.yaml
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/dts/Bindings/mtd/partitions/qcom,smem-part.yaml b/dts/Bindings/mtd/partitions/qcom,smem-part.yaml
index dc07909af0..1c2b4e780c 100644
--- a/dts/Bindings/mtd/partitions/qcom,smem-part.yaml
+++ b/dts/Bindings/mtd/partitions/qcom,smem-part.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm SMEM NAND flash partition parser binding
+title: Qualcomm SMEM NAND flash partition parser
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@@ -15,13 +15,15 @@ description: |
   varies between partition table revisions. V3 supports maximum 16 partitions
   and V4 supports 48 partitions.
 
+select: false
+
 properties:
   compatible:
     const: qcom,smem-part
 
 patternProperties:
   "^partition-[0-9a-z]+$":
-    $ref: partition.yaml#
+    $ref: nvmem-cells.yaml
 
 required:
   - compatible
@@ -39,22 +41,22 @@ examples:
   - |
     /* Example declaring dynamic partition */
     flash {
-      partitions {
-        compatible = "qcom,smem-part";
-
-        partition-art {
-          compatible = "nvmem-cells";
-          #address-cells = <1>;
-          #size-cells = <1>;
-          label = "0:art";
-
-          macaddr_art_0: macaddr@0 {
-            reg = <0x0 0x6>;
-          };
-
-          macaddr_art_6: macaddr@6 {
-            reg = <0x6 0x6>;
-          };
+        partitions {
+            compatible = "qcom,smem-part";
+
+            partition-art {
+                compatible = "nvmem-cells";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                label = "0:art";
+
+                macaddr_art_0: macaddr@0 {
+                    reg = <0x0 0x6>;
+                };
+
+                macaddr_art_6: macaddr@6 {
+                    reg = <0x6 0x6>;
+                };
+            };
         };
-      };
     };
diff --git a/dts/Bindings/mtd/partitions/redboot-fis.yaml b/dts/Bindings/mtd/partitions/redboot-fis.yaml
index fee8d81b52..ba7445cd69 100644
--- a/dts/Bindings/mtd/partitions/redboot-fis.yaml
+++ b/dts/Bindings/mtd/partitions/redboot-fis.yaml
@@ -16,6 +16,8 @@ description: The FLASH Image System (FIS) directory is a flash description
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
+select: false
+
 properties:
   compatible:
     const: redboot-fis
@@ -26,6 +28,10 @@ properties:
       device. On a flash memory with 32KB eraseblocks, 0 means the first
       eraseblock at 0x00000000, 1 means the second eraseblock at 0x00008000 and so on.
 
+  '#address-cells': false
+
+  '#size-cells': false
+
 required:
   - compatible
   - fis-index-block
diff --git a/dts/Bindings/mtd/partitions/tplink,safeloader-partitions.yaml b/dts/Bindings/mtd/partitions/tplink,safeloader-partitions.yaml
new file mode 100644
index 0000000000..a24bbaac3a
--- /dev/null
+++ b/dts/Bindings/mtd/partitions/tplink,safeloader-partitions.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/tplink,safeloader-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TP-Link SafeLoader partitions
+
+description: |
+  TP-Link home routers store various data on flash (e.g. bootloader,
+  flash layout, firmware, product info, configuration, calibration
+  data). That requires flash partitioning.
+
+  Flash space layout of TP-Link devices is stored on flash itself using
+  a custom ASCII-based format. That format was first found in TP-Link
+  devices with a custom SafeLoader bootloader. Later it was adapted to
+  CFE and U-Boot bootloaders.
+
+  Partitions specified in partitions table cover whole flash space. Some
+  contain static data that shouldn't get modified (device's MAC or WiFi
+  calibration data). Others are semi-static (like kernel). Finally some
+  partitions contain fully changeable content (like rootfs).
+
+  This binding describes partitioning method and defines offset of ASCII
+  based partitions table. That offset is picked at manufacturing process
+  and doesn't change.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: tplink,safeloader-partitions
+
+  partitions-table-offset:
+    description: Flash offset of partitions table
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "^partition-.*$":
+    $ref: partition.yaml#
+
+required:
+  - partitions-table-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "tplink,safeloader-partitions";
+        partitions-table-offset = <0x100000>;
+
+        partition-file-system {
+                linux,rootfs;
+        };
+    };
diff --git a/dts/Bindings/mtd/partitions/u-boot.yaml b/dts/Bindings/mtd/partitions/u-boot.yaml
index 8a88e7d165..3c56efe48e 100644
--- a/dts/Bindings/mtd/partitions/u-boot.yaml
+++ b/dts/Bindings/mtd/partitions/u-boot.yaml
@@ -27,6 +27,10 @@ properties:
           Broadcom stores environment variables inside a U-Boot partition. They
           can be identified by a custom header with magic value.
 
+patternProperties:
+  "^partition-.*$":
+    $ref: partition.yaml#
+
 unevaluatedProperties: false
 
 examples:
@@ -40,6 +44,9 @@ examples:
             compatible = "brcm,u-boot";
             reg = <0x0 0x100000>;
             label = "u-boot";
+
+            partition-u-boot-env {
+            };
         };
 
         partition@100000 {
diff --git a/dts/Bindings/mtd/qcom,nandc.yaml b/dts/Bindings/mtd/qcom,nandc.yaml
index 482a2c0687..07024ee459 100644
--- a/dts/Bindings/mtd/qcom,nandc.yaml
+++ b/dts/Bindings/mtd/qcom,nandc.yaml
@@ -31,9 +31,6 @@ properties:
       - const: core
       - const: aon
 
-  "#address-cells": true
-  "#size-cells": true
-
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -139,85 +136,85 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
     nand-controller@1ac00000 {
-      compatible = "qcom,ipq806x-nand";
-      reg = <0x1ac00000 0x800>;
+        compatible = "qcom,ipq806x-nand";
+        reg = <0x1ac00000 0x800>;
 
-      clocks = <&gcc EBI2_CLK>,
-               <&gcc EBI2_AON_CLK>;
-      clock-names = "core", "aon";
+        clocks = <&gcc EBI2_CLK>,
+                 <&gcc EBI2_AON_CLK>;
+        clock-names = "core", "aon";
 
-      dmas = <&adm_dma 3>;
-      dma-names = "rxtx";
-      qcom,cmd-crci = <15>;
-      qcom,data-crci = <3>;
+        dmas = <&adm_dma 3>;
+        dma-names = "rxtx";
+        qcom,cmd-crci = <15>;
+        qcom,data-crci = <3>;
 
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      nand@0 {
-        reg = <0>;
+        nand@0 {
+            reg = <0>;
 
-        nand-ecc-strength = <4>;
-        nand-bus-width = <8>;
+            nand-ecc-strength = <4>;
+            nand-bus-width = <8>;
 
-        qcom,boot-partitions = <0x0 0x58a0000>;
+            qcom,boot-partitions = <0x0 0x58a0000>;
 
-        partitions {
-          compatible = "fixed-partitions";
-          #address-cells = <1>;
-          #size-cells = <1>;
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
 
-          partition@0 {
-            label = "boot-nand";
-            reg = <0 0x58a0000>;
-          };
+                partition@0 {
+                    label = "boot-nand";
+                    reg = <0 0x58a0000>;
+                };
 
-          partition@58a0000 {
-            label = "fs-nand";
-            reg = <0x58a0000 0x4000000>;
-          };
+                partition@58a0000 {
+                    label = "fs-nand";
+                    reg = <0x58a0000 0x4000000>;
+                };
+            };
         };
-      };
     };
 
     #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
     nand-controller@79b0000 {
-      compatible = "qcom,ipq4019-nand";
-      reg = <0x79b0000 0x1000>;
-
-      clocks = <&gcc GCC_QPIC_CLK>,
-               <&gcc GCC_QPIC_AHB_CLK>;
-      clock-names = "core", "aon";
-
-      dmas = <&qpicbam 0>,
-             <&qpicbam 1>,
-             <&qpicbam 2>;
-      dma-names = "tx", "rx", "cmd";
-
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      nand@0 {
-        reg = <0>;
-        nand-ecc-strength = <4>;
-        nand-bus-width = <8>;
-
-        partitions {
-          compatible = "fixed-partitions";
-          #address-cells = <1>;
-          #size-cells = <1>;
-
-          partition@0 {
-            label = "boot-nand";
-            reg = <0 0x58a0000>;
-          };
-
-          partition@58a0000 {
-            label = "fs-nand";
-            reg = <0x58a0000 0x4000000>;
-          };
+        compatible = "qcom,ipq4019-nand";
+        reg = <0x79b0000 0x1000>;
+
+        clocks = <&gcc GCC_QPIC_CLK>,
+                 <&gcc GCC_QPIC_AHB_CLK>;
+        clock-names = "core", "aon";
+
+        dmas = <&qpicbam 0>,
+               <&qpicbam 1>,
+               <&qpicbam 2>;
+        dma-names = "tx", "rx", "cmd";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-ecc-strength = <4>;
+            nand-bus-width = <8>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "boot-nand";
+                    reg = <0 0x58a0000>;
+                };
+
+                partition@58a0000 {
+                    label = "fs-nand";
+                    reg = <0x58a0000 0x4000000>;
+                };
+            };
         };
-      };
     };
 
 ...
diff --git a/dts/Bindings/mtd/rockchip,nand-controller.yaml b/dts/Bindings/mtd/rockchip,nand-controller.yaml
index d681a4676f..566f330851 100644
--- a/dts/Bindings/mtd/rockchip,nand-controller.yaml
+++ b/dts/Bindings/mtd/rockchip,nand-controller.yaml
@@ -19,7 +19,9 @@ properties:
       - const: rockchip,rk2928-nfc
       - const: rockchip,rv1108-nfc
       - items:
-          - const: rockchip,rk3036-nfc
+          - enum:
+              - rockchip,rk3036-nfc
+              - rockchip,rk3128-nfc
           - const: rockchip,rk2928-nfc
       - items:
           - const: rockchip,rk3308-nfc
diff --git a/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml b/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml
index eab8ea3da1..19cf1f18b6 100644
--- a/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/st,stm32-fmc2-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
 
 maintainers:
   - Christophe Kerello <christophe.kerello@foss.st.com>
@@ -101,31 +101,32 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
+
     nand-controller@58002000 {
-      compatible = "st,stm32mp15-fmc2";
-      reg = <0x58002000 0x1000>,
-            <0x80000000 0x1000>,
-            <0x88010000 0x1000>,
-            <0x88020000 0x1000>,
-            <0x81000000 0x1000>,
-            <0x89010000 0x1000>,
-            <0x89020000 0x1000>;
-      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-      dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
-             <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
-             <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
-      dma-names = "tx", "rx", "ecc";
-      clocks = <&rcc FMC_K>;
-      resets = <&rcc FMC_R>;
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      nand@0 {
-        reg = <0>;
-        nand-on-flash-bbt;
+        compatible = "st,stm32mp15-fmc2";
+        reg = <0x58002000 0x1000>,
+              <0x80000000 0x1000>,
+              <0x88010000 0x1000>,
+              <0x88020000 0x1000>,
+              <0x81000000 0x1000>,
+              <0x89010000 0x1000>,
+              <0x89020000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+               <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+               <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+        dma-names = "tx", "rx", "ecc";
+        clocks = <&rcc FMC_K>;
+        resets = <&rcc FMC_R>;
         #address-cells = <1>;
-        #size-cells = <1>;
-      };
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-on-flash-bbt;
+            #address-cells = <1>;
+            #size-cells = <1>;
+        };
     };
 
 ...
diff --git a/dts/Bindings/mtd/ti,am654-hbmc.yaml b/dts/Bindings/mtd/ti,am654-hbmc.yaml
index 30b458c41c..4774c92e7f 100644
--- a/dts/Bindings/mtd/ti,am654-hbmc.yaml
+++ b/dts/Bindings/mtd/ti,am654-hbmc.yaml
@@ -44,26 +44,26 @@ additionalProperties: false
 examples:
   - |
     bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      hbmc: memory-controller@47034000 {
-        compatible = "ti,am654-hbmc";
-        reg = <0x0 0x47034000 0x0 0x100>,
-              <0x5 0x00000000 0x1 0x0000000>;
-        ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
-                 <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
-        clocks = <&k3_clks 102 0>;
         #address-cells = <2>;
-        #size-cells = <1>;
-        power-domains = <&k3_pds 55>;
-        mux-controls = <&hbmc_mux 0>;
+        #size-cells = <2>;
 
-        flash@0,0 {
-            compatible = "cypress,hyperflash", "cfi-flash";
-            reg = <0x0 0x0 0x4000000>;
-            #address-cells = <1>;
+        hbmc: memory-controller@47034000 {
+            compatible = "ti,am654-hbmc";
+            reg = <0x0 0x47034000 0x0 0x100>,
+                  <0x5 0x00000000 0x1 0x0000000>;
+            ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
+                     <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
+            clocks = <&k3_clks 102 0>;
+            #address-cells = <2>;
             #size-cells = <1>;
+            power-domains = <&k3_pds 55>;
+            mux-controls = <&hbmc_mux 0>;
+
+            flash@0,0 {
+                compatible = "cypress,hyperflash", "cfi-flash";
+                reg = <0x0 0x0 0x4000000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+            };
         };
-      };
     };
diff --git a/dts/Bindings/mtd/ti,gpmc-onenand.yaml b/dts/Bindings/mtd/ti,gpmc-onenand.yaml
index a953f7397c..8a79ad3002 100644
--- a/dts/Bindings/mtd/ti,gpmc-onenand.yaml
+++ b/dts/Bindings/mtd/ti,gpmc-onenand.yaml
@@ -15,6 +15,9 @@ description:
   as child nodes of the GPMC controller.
 
 properties:
+  $nodename:
+    pattern: "^onenand@[0-9],[0,9]$"
+
   compatible:
     const: ti,omap2-onenand
 
diff --git a/dts/Bindings/mux/gpio-mux.yaml b/dts/Bindings/mux/gpio-mux.yaml
index ee4de9fbaf..b597c1f2c5 100644
--- a/dts/Bindings/mux/gpio-mux.yaml
+++ b/dts/Bindings/mux/gpio-mux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/gpio-mux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: GPIO-based multiplexer controller bindings
+title: GPIO-based multiplexer controller
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
diff --git a/dts/Bindings/mux/mux-consumer.yaml b/dts/Bindings/mux/mux-consumer.yaml
index d3d8549673..9e2d78a78e 100644
--- a/dts/Bindings/mux/mux-consumer.yaml
+++ b/dts/Bindings/mux/mux-consumer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/mux-consumer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common multiplexer controller consumer bindings
+title: Common multiplexer controller consumer
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
diff --git a/dts/Bindings/mux/mux-controller.yaml b/dts/Bindings/mux/mux-controller.yaml
index c855fbad38..8b943082a2 100644
--- a/dts/Bindings/mux/mux-controller.yaml
+++ b/dts/Bindings/mux/mux-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/mux-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common multiplexer controller provider bindings
+title: Common multiplexer controller provider
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
diff --git a/dts/Bindings/mux/reg-mux.yaml b/dts/Bindings/mux/reg-mux.yaml
index dfd9ea582b..dc4be092fc 100644
--- a/dts/Bindings/mux/reg-mux.yaml
+++ b/dts/Bindings/mux/reg-mux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/reg-mux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic register bitfield-based multiplexer controller bindings
+title: Generic register bitfield-based multiplexer controller
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
diff --git a/dts/Bindings/net/adi,adin1110.yaml b/dts/Bindings/net/adi,adin1110.yaml
index b6bd8ee38a..9de865295d 100644
--- a/dts/Bindings/net/adi,adin1110.yaml
+++ b/dts/Bindings/net/adi,adin1110.yaml
@@ -46,6 +46,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/net/asix,ax88178.yaml b/dts/Bindings/net/asix,ax88178.yaml
index 1af52358de..768504ccbf 100644
--- a/dts/Bindings/net/asix,ax88178.yaml
+++ b/dts/Bindings/net/asix,ax88178.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/asix,ax88178.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: The device tree bindings for the USB Ethernet controllers
+title: ASIX AX88172/AX88772 USB Ethernet Controllers
 
 maintainers:
   - Oleksij Rempel <o.rempel@pengutronix.de>
@@ -27,7 +27,9 @@ properties:
           - usbb95,772b   # ASIX AX88772B
           - usbb95,7e2b   # ASIX AX88772B
 
-  reg: true
+  reg:
+    maxItems: 1
+
   local-mac-address: true
   mac-address: true
 
diff --git a/dts/Bindings/net/bluetooth.txt b/dts/Bindings/net/bluetooth.txt
deleted file mode 100644
index 94797df751..0000000000
--- a/dts/Bindings/net/bluetooth.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-The following properties are common to the Bluetooth controllers:
-
-- local-bd-address: array of 6 bytes, specifies the BD address that was
-  uniquely assigned to the Bluetooth device, formatted with least significant
-  byte first (little-endian).
diff --git a/dts/Bindings/net/bluetooth/bluetooth-controller.yaml b/dts/Bindings/net/bluetooth/bluetooth-controller.yaml
new file mode 100644
index 0000000000..59bb0d7e8a
--- /dev/null
+++ b/dts/Bindings/net/bluetooth/bluetooth-controller.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/bluetooth-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bluetooth Controller Common Properties
+
+maintainers:
+  - Marcel Holtmann <marcel@holtmann.org>
+  - Johan Hedberg <johan.hedberg@gmail.com>
+  - Luiz Augusto von Dentz <luiz.dentz@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^bluetooth(@.*)?$"
+
+  local-bd-address:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 6
+    description:
+      Specifies the BD address that was uniquely assigned to the Bluetooth
+      device. Formatted with least significant byte first (little-endian), e.g.
+      in order to assign the address 00:11:22:33:44:55 this property must have
+      the value [55 44 33 22 11 00].
+
+additionalProperties: true
+
+...
diff --git a/dts/Bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml b/dts/Bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
new file mode 100644
index 0000000000..37cb39a3a6
--- /dev/null
+++ b/dts/Bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4377 family PCIe Bluetooth Chips
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
+  usually found in Apple machines. The Wi-Fi part of the chip is described in
+  bindings/net/wireless/brcm,bcm4329-fmac.yaml.
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci14e4,5fa0 # BCM4377
+      - pci14e4,5f69 # BCM4378
+      - pci14e4,5f71 # BCM4387
+
+  reg:
+    maxItems: 1
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Board type of the Bluetooth chip. This is used to decouple
+      the overall system board from the Bluetooth module and used to construct
+      firmware and calibration data filenames.
+      On Apple platforms, this should be the Apple module-instance codename
+      prefixed by "apple,", e.g. "apple,atlantisb".
+    pattern: '^apple,.*'
+
+  brcm,taurus-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module does not
+      support beamforming.
+
+  brcm,taurus-bf-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module supports
+      beamforming.
+
+  local-bd-address: true
+
+required:
+  - compatible
+  - reg
+  - local-bd-address
+  - brcm,board-type
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie@a0000000 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xa0000000 0x1000000>;
+      device_type = "pci";
+      ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
+
+      bluetooth@0,1 {
+        compatible = "pci14e4,5f69";
+        reg = <0x100 0x0 0x0 0x0 0x0>;
+        brcm,board-type = "apple,honshu";
+        /* To be filled by the bootloader */
+        local-bd-address = [00 00 00 00 00 00];
+      };
+    };
diff --git a/dts/Bindings/net/qualcomm-bluetooth.yaml b/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
index f93c6e7a1b..a6a6b0e4df 100644
--- a/dts/Bindings/net/qualcomm-bluetooth.yaml
+++ b/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Bluetooth Chips
@@ -79,8 +79,7 @@ properties:
   firmware-name:
     description: specify the name of nvm firmware to load
 
-  local-bd-address:
-    description: see Documentation/devicetree/bindings/net/bluetooth.txt
+  local-bd-address: true
 
 
 required:
@@ -89,6 +88,7 @@ required:
 additionalProperties: false
 
 allOf:
+  - $ref: bluetooth-controller.yaml#
   - if:
       properties:
         compatible:
diff --git a/dts/Bindings/net/brcm,bcmgenet.yaml b/dts/Bindings/net/brcm,bcmgenet.yaml
index e5af53508e..c99034f053 100644
--- a/dts/Bindings/net/brcm,bcmgenet.yaml
+++ b/dts/Bindings/net/brcm,bcmgenet.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM7xxx Ethernet Controller (GENET) binding
+title: Broadcom BCM7xxx Ethernet Controller (GENET)
 
 maintainers:
   - Doug Berger <opendmb@gmail.com>
diff --git a/dts/Bindings/net/broadcom-bluetooth.yaml b/dts/Bindings/net/broadcom-bluetooth.yaml
index 445b2a5536..b964c7dcec 100644
--- a/dts/Bindings/net/broadcom-bluetooth.yaml
+++ b/dts/Bindings/net/broadcom-bluetooth.yaml
@@ -19,11 +19,14 @@ properties:
       - brcm,bcm4329-bt
       - brcm,bcm4330-bt
       - brcm,bcm4334-bt
+      - brcm,bcm43430a0-bt
+      - brcm,bcm43430a1-bt
       - brcm,bcm43438-bt
       - brcm,bcm4345c5
       - brcm,bcm43540-bt
       - brcm,bcm4335a0
       - brcm,bcm4349-bt
+      - cypress,cyw4373a0-bt
       - infineon,cyw55572-bt
 
   shutdown-gpios:
diff --git a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml
index 3c51b2d029..9c494957a0 100644
--- a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml
+++ b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/allwinner,sun4i-a10-can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CAN Controller Device Tree Bindings
+title: Allwinner A10 CAN Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/dts/Bindings/net/can/bosch,c_can.yaml b/dts/Bindings/net/can/bosch,c_can.yaml
index 51aa89ac7e..4d7d67ee17 100644
--- a/dts/Bindings/net/can/bosch,c_can.yaml
+++ b/dts/Bindings/net/can/bosch,c_can.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bosch C_CAN/D_CAN controller Device Tree Bindings
+title: Bosch C_CAN/D_CAN controller
 
 description: Bosch C_CAN/D_CAN controller for CAN bus
 
diff --git a/dts/Bindings/net/can/bosch,m_can.yaml b/dts/Bindings/net/can/bosch,m_can.yaml
index 26aa0830ee..67879aab62 100644
--- a/dts/Bindings/net/can/bosch,m_can.yaml
+++ b/dts/Bindings/net/can/bosch,m_can.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bosch MCAN controller Bindings
+title: Bosch MCAN controller
 
 description: Bosch MCAN controller for CAN bus
 
diff --git a/dts/Bindings/net/can/can-controller.yaml b/dts/Bindings/net/can/can-controller.yaml
index 1f0e980510..217be90960 100644
--- a/dts/Bindings/net/can/can-controller.yaml
+++ b/dts/Bindings/net/can/can-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/can-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CAN Controller Generic Binding
+title: CAN Controller Common Properties
 
 maintainers:
   - Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/dts/Bindings/net/can/can-transceiver.yaml b/dts/Bindings/net/can/can-transceiver.yaml
index d1ef1fe6ab..d422b3921f 100644
--- a/dts/Bindings/net/can/can-transceiver.yaml
+++ b/dts/Bindings/net/can/can-transceiver.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/can-transceiver.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CAN transceiver Bindings
+title: CAN transceiver
 
 description: CAN transceiver generic properties bindings
 
diff --git a/dts/Bindings/net/can/ctu,ctucanfd.yaml b/dts/Bindings/net/can/ctu,ctucanfd.yaml
index 4635cb96fc..a009a44029 100644
--- a/dts/Bindings/net/can/ctu,ctucanfd.yaml
+++ b/dts/Bindings/net/can/ctu,ctucanfd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CTU CAN FD Open-source IP Core Device Tree Bindings
+title: CTU CAN FD Open-source IP Core
 
 description: |
   Open-source CAN FD IP core developed at the Czech Technical University in Prague
diff --git a/dts/Bindings/net/can/fsl,flexcan.yaml b/dts/Bindings/net/can/fsl,flexcan.yaml
index e52db841bb..6e59bd2a60 100644
--- a/dts/Bindings/net/can/fsl,flexcan.yaml
+++ b/dts/Bindings/net/can/fsl,flexcan.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - fsl,imx93-flexcan
           - fsl,imx8qm-flexcan
           - fsl,imx8mp-flexcan
           - fsl,imx6q-flexcan
diff --git a/dts/Bindings/net/can/microchip,mcp251xfd.yaml b/dts/Bindings/net/can/microchip,mcp251xfd.yaml
index 7a73057707..fce84aecae 100644
--- a/dts/Bindings/net/can/microchip,mcp251xfd.yaml
+++ b/dts/Bindings/net/can/microchip,mcp251xfd.yaml
@@ -4,9 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title:
-  Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN
-  controller device tree bindings
+title: Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN controller
 
 maintainers:
   - Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/dts/Bindings/net/can/renesas,rcar-canfd.yaml b/dts/Bindings/net/can/renesas,rcar-canfd.yaml
index 6f71fc96bc..1eb98c9a1a 100644
--- a/dts/Bindings/net/can/renesas,rcar-canfd.yaml
+++ b/dts/Bindings/net/can/renesas,rcar-canfd.yaml
@@ -9,9 +9,6 @@ title: Renesas R-Car CAN FD Controller
 maintainers:
   - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
 
-allOf:
-  - $ref: can-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -33,7 +30,7 @@ properties:
 
       - items:
           - enum:
-              - renesas,r9a07g043-canfd    # RZ/G2UL
+              - renesas,r9a07g043-canfd    # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
               - renesas,r9a07g054-canfd    # RZ/V2L
           - const: renesas,rzg2l-canfd     # RZ/G2L family
@@ -77,12 +74,13 @@ properties:
     description: Maximum frequency of the CANFD clock.
 
 patternProperties:
-  "^channel[01]$":
+  "^channel[0-7]$":
     type: object
     description:
-      The controller supports two channels and each is represented as a child
-      node.  Each child node supports the "status" property only, which
-      is used to enable/disable the respective channel.
+      The controller supports multiple channels and each is represented as a
+      child node.  Each channel can be enabled/disabled individually.
+
+    additionalProperties: false
 
 required:
   - compatible
@@ -98,60 +96,73 @@ required:
   - channel0
   - channel1
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,rzg2l-canfd
-then:
-  properties:
-    interrupts:
-      items:
-        - description: CAN global error interrupt
-        - description: CAN receive FIFO interrupt
-        - description: CAN0 error interrupt
-        - description: CAN0 transmit interrupt
-        - description: CAN0 transmit/receive FIFO receive completion interrupt
-        - description: CAN1 error interrupt
-        - description: CAN1 transmit interrupt
-        - description: CAN1 transmit/receive FIFO receive completion interrupt
-
-    interrupt-names:
-      items:
-        - const: g_err
-        - const: g_recc
-        - const: ch0_err
-        - const: ch0_rec
-        - const: ch0_trx
-        - const: ch1_err
-        - const: ch1_rec
-        - const: ch1_trx
-
-    resets:
-      maxItems: 2
-
-    reset-names:
-      items:
-        - const: rstp_n
-        - const: rstc_n
-
-  required:
-    - reset-names
-else:
-  properties:
-    interrupts:
-      items:
-        - description: Channel interrupt
-        - description: Global interrupt
-
-    interrupt-names:
-      items:
-        - const: ch_int
-        - const: g_int
-
-    resets:
-      maxItems: 1
+allOf:
+  - $ref: can-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-canfd
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CAN global error interrupt
+            - description: CAN receive FIFO interrupt
+            - description: CAN0 error interrupt
+            - description: CAN0 transmit interrupt
+            - description: CAN0 transmit/receive FIFO receive completion interrupt
+            - description: CAN1 error interrupt
+            - description: CAN1 transmit interrupt
+            - description: CAN1 transmit/receive FIFO receive completion interrupt
+
+        interrupt-names:
+          items:
+            - const: g_err
+            - const: g_recc
+            - const: ch0_err
+            - const: ch0_rec
+            - const: ch0_trx
+            - const: ch1_err
+            - const: ch1_rec
+            - const: ch1_trx
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: rstp_n
+            - const: rstc_n
+
+      required:
+        - reset-names
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Channel interrupt
+            - description: Global interrupt
+
+        interrupt-names:
+          items:
+            - const: ch_int
+            - const: g_int
+
+        resets:
+          maxItems: 1
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,r8a779a0-canfd
+    then:
+      patternProperties:
+        "^channel[2-7]$": false
 
 unevaluatedProperties: false
 
diff --git a/dts/Bindings/net/cdns,macb.yaml b/dts/Bindings/net/cdns,macb.yaml
index 318f4efe7f..bef5e0f895 100644
--- a/dts/Bindings/net/cdns,macb.yaml
+++ b/dts/Bindings/net/cdns,macb.yaml
@@ -203,7 +203,6 @@ examples:
                     power-domains = <&zynqmp_firmware PD_ETH_1>;
                     resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
                     reset-names = "gem1_rst";
-                    status = "okay";
                     phy-mode = "sgmii";
                     phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
                     fixed-link {
diff --git a/dts/Bindings/net/dsa/arrow,xrs700x.yaml b/dts/Bindings/net/dsa/arrow,xrs700x.yaml
index 259a0c6547..2a6d126606 100644
--- a/dts/Bindings/net/dsa/arrow,xrs700x.yaml
+++ b/dts/Bindings/net/dsa/arrow,xrs700x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Arrow SpeedChips XRS7000 Series Switch Device Tree Bindings
+title: Arrow SpeedChips XRS7000 Series Switch
 
 allOf:
   - $ref: dsa.yaml#
diff --git a/dts/Bindings/net/dsa/dsa-port.yaml b/dts/Bindings/net/dsa/dsa-port.yaml
index 10ad7e7109..b173fceb89 100644
--- a/dts/Bindings/net/dsa/dsa-port.yaml
+++ b/dts/Bindings/net/dsa/dsa-port.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Switch port Device Tree Bindings
+title: Ethernet Switch port
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
@@ -19,7 +19,8 @@ allOf:
 
 properties:
   reg:
-    description: Port number
+    items:
+      - description: Port number
 
   label:
     description:
diff --git a/dts/Bindings/net/dsa/dsa.yaml b/dts/Bindings/net/dsa/dsa.yaml
index b9d48e357e..5469ae8a43 100644
--- a/dts/Bindings/net/dsa/dsa.yaml
+++ b/dts/Bindings/net/dsa/dsa.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/dsa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Switch Device Tree Bindings
+title: Ethernet Switch
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
diff --git a/dts/Bindings/net/dsa/hirschmann,hellcreek.yaml b/dts/Bindings/net/dsa/hirschmann,hellcreek.yaml
index 73b774eadd..447589b01e 100644
--- a/dts/Bindings/net/dsa/hirschmann,hellcreek.yaml
+++ b/dts/Bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/hirschmann,hellcreek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hirschmann Hellcreek TSN Switch Device Tree Bindings
+title: Hirschmann Hellcreek TSN Switch
 
 allOf:
   - $ref: dsa.yaml#
@@ -12,7 +12,7 @@ allOf:
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
   - Florian Fainelli <f.fainelli@gmail.com>
-  - Vivien Didelot <vivien.didelot@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
   - Kurt Kanzenbach <kurt@linutronix.de>
 
 description:
diff --git a/dts/Bindings/net/dsa/microchip,lan937x.yaml b/dts/Bindings/net/dsa/microchip,lan937x.yaml
index 630bf0f829..b34de30396 100644
--- a/dts/Bindings/net/dsa/microchip,lan937x.yaml
+++ b/dts/Bindings/net/dsa/microchip,lan937x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/microchip,lan937x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LAN937x Ethernet Switch Series Tree Bindings
+title: LAN937x Ethernet Switch Series
 
 maintainers:
   - UNGLinuxDriver@microchip.com
diff --git a/dts/Bindings/net/dsa/mscc,ocelot.yaml b/dts/Bindings/net/dsa/mscc,ocelot.yaml
index 8d93ed9c17..347a0e1b3d 100644
--- a/dts/Bindings/net/dsa/mscc,ocelot.yaml
+++ b/dts/Bindings/net/dsa/mscc,ocelot.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip Ocelot Switch Family Device Tree Bindings
+title: Microchip Ocelot Switch Family
 
 maintainers:
   - Vladimir Oltean <vladimir.oltean@nxp.com>
diff --git a/dts/Bindings/net/dsa/nxp,sja1105.yaml b/dts/Bindings/net/dsa/nxp,sja1105.yaml
index 1e26d876d1..df98a16e4e 100644
--- a/dts/Bindings/net/dsa/nxp,sja1105.yaml
+++ b/dts/Bindings/net/dsa/nxp,sja1105.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP SJA1105 Automotive Ethernet Switch Family Device Tree Bindings
+title: NXP SJA1105 Automotive Ethernet Switch Family
 
 description:
   The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at
diff --git a/dts/Bindings/net/dsa/renesas,rzn1-a5psw.yaml b/dts/Bindings/net/dsa/renesas,rzn1-a5psw.yaml
index 7ca9c19a15..0a0d62b6c0 100644
--- a/dts/Bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/dts/Bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -74,10 +74,10 @@ properties:
 
         properties:
           pcs-handle:
+            maxItems: 1
             description:
               phandle pointing to a PCS sub-node compatible with
               renesas,rzn1-miic.yaml#
-            $ref: /schemas/types.yaml#/definitions/phandle
 
 unevaluatedProperties: false
 
diff --git a/dts/Bindings/net/engleder,tsnep.yaml b/dts/Bindings/net/engleder,tsnep.yaml
index a6921e805e..4116667133 100644
--- a/dts/Bindings/net/engleder,tsnep.yaml
+++ b/dts/Bindings/net/engleder,tsnep.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/engleder,tsnep.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TSN endpoint Ethernet MAC binding
+title: TSN endpoint Ethernet MAC
 
 maintainers:
   - Gerhard Engleder <gerhard@engleder-embedded.com>
diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml
index 4b3c590fce..00be387984 100644
--- a/dts/Bindings/net/ethernet-controller.yaml
+++ b/dts/Bindings/net/ethernet-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Controller Generic Binding
+title: Ethernet Controller Common Properties
 
 maintainers:
   - David S. Miller <davem@davemloft.net>
@@ -108,11 +108,17 @@ properties:
     $ref: "#/properties/phy-connection-type"
 
   pcs-handle:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Specifies a reference to a node representing a PCS PHY device on a MDIO
       bus to link with an external PHY (phy-handle) if exists.
 
+  pcs-handle-names:
+    description:
+      The name of each PCS in pcs-handle.
+
   phy-handle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -216,6 +222,9 @@ properties:
         required:
           - speed
 
+dependencies:
+  pcs-handle-names: [pcs-handle]
+
 allOf:
   - if:
       properties:
diff --git a/dts/Bindings/net/ethernet-phy.yaml b/dts/Bindings/net/ethernet-phy.yaml
index ad808e9ce5..1327b81f15 100644
--- a/dts/Bindings/net/ethernet-phy.yaml
+++ b/dts/Bindings/net/ethernet-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet PHY Generic Binding
+title: Ethernet PHY Common Properties
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
diff --git a/dts/Bindings/net/fsl,fec.yaml b/dts/Bindings/net/fsl,fec.yaml
index e0f376f7e2..77e5f32cb6 100644
--- a/dts/Bindings/net/fsl,fec.yaml
+++ b/dts/Bindings/net/fsl,fec.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Fast Ethernet Controller (FEC)
 
 maintainers:
-  - Joakim Zhang <qiangqing.zhang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Wei Fang <wei.fang@nxp.com>
+  - NXP Linux Team <linux-imx@nxp.com>
 
 allOf:
   - $ref: ethernet-controller.yaml#
diff --git a/dts/Bindings/net/fsl,fman-dtsec.yaml b/dts/Bindings/net/fsl,fman-dtsec.yaml
index 3a35ac1c26..c80c880a9d 100644
--- a/dts/Bindings/net/fsl,fman-dtsec.yaml
+++ b/dts/Bindings/net/fsl,fman-dtsec.yaml
@@ -85,9 +85,39 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: A reference to the IEEE1588 timer
 
+  phys:
+    description: A reference to the SerDes lane(s)
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: serdes
+
   pcsphy-handle:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description: A reference to the PCS (typically found on the SerDes)
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 3
+    deprecated: true
+    description: See pcs-handle.
+
+  pcs-handle:
+    minItems: 1
+    maxItems: 3
+    description: |
+      A reference to the various PCSs (typically found on the SerDes). If
+      pcs-handle-names is absent, and phy-connection-type is "xgmii", then the first
+      reference will be assumed to be for "xfi". Otherwise, if pcs-handle-names is
+      absent, then the first reference will be assumed to be for "sgmii".
+
+  pcs-handle-names:
+    minItems: 1
+    maxItems: 3
+    items:
+      enum:
+        - sgmii
+        - qsgmii
+        - xfi
+    description: The type of each PCS in pcsphy-handle.
 
   tbi-handle:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -100,6 +130,10 @@ required:
   - fsl,fman-ports
   - ptp-timer
 
+dependencies:
+  pcs-handle-names:
+    - pcs-handle
+
 allOf:
   - $ref: ethernet-controller.yaml#
   - if:
@@ -110,14 +144,6 @@ allOf:
     then:
       required:
         - tbi-handle
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: fsl,fman-memac
-    then:
-      required:
-        - pcsphy-handle
 
 unevaluatedProperties: false
 
@@ -138,8 +164,9 @@ examples:
             reg = <0xe8000 0x1000>;
             fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
             ptp-timer = <&ptp_timer0>;
-            pcsphy-handle = <&pcsphy4>;
-            phy-handle = <&sgmii_phy1>;
-            phy-connection-type = "sgmii";
+            pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+            pcs-handle-names = "sgmii", "qsgmii";
+            phys = <&serdes1 1>;
+            phy-names = "serdes";
     };
 ...
diff --git a/dts/Bindings/net/fsl,qoriq-mc-dpmac.yaml b/dts/Bindings/net/fsl,qoriq-mc-dpmac.yaml
index 7f620a71a9..6e0763898d 100644
--- a/dts/Bindings/net/fsl,qoriq-mc-dpmac.yaml
+++ b/dts/Bindings/net/fsl,qoriq-mc-dpmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DPAA2 MAC bindings
+title: DPAA2 MAC
 
 maintainers:
   - Ioana Ciornei <ioana.ciornei@nxp.com>
@@ -31,7 +31,7 @@ properties:
   phy-mode: true
 
   pcs-handle:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description:
       A reference to a node representing a PCS PHY device found on
       the internal MDIO bus.
diff --git a/dts/Bindings/net/fsl-fman.txt b/dts/Bindings/net/fsl-fman.txt
index b9055335db..bda4b41af0 100644
--- a/dts/Bindings/net/fsl-fman.txt
+++ b/dts/Bindings/net/fsl-fman.txt
@@ -320,8 +320,9 @@ For internal PHY device on internal mdio bus, a PHY node should be created.
 See the definition of the PHY node in booting-without-of.txt for an
 example of how to define a PHY (Internal PHY has no interrupt line).
 - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
-- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
-  PCS PHY addr must be '0'.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
+  The PCS PHY address should correspond to the value of the appropriate
+  MDEV_PORT.
 
 EXAMPLE
 
diff --git a/dts/Bindings/net/ingenic,mac.yaml b/dts/Bindings/net/ingenic,mac.yaml
index 93b3e991d2..bdea101c2f 100644
--- a/dts/Bindings/net/ingenic,mac.yaml
+++ b/dts/Bindings/net/ingenic,mac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ingenic,mac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for MAC in Ingenic SoCs
+title: MAC in Ingenic SoCs
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
diff --git a/dts/Bindings/net/marvell,dfx-server.yaml b/dts/Bindings/net/marvell,dfx-server.yaml
new file mode 100644
index 0000000000..8a14c919e3
--- /dev/null
+++ b/dts/Bindings/net/marvell,dfx-server.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,dfx-server.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Prestera DFX server
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: marvell,dfx-server
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: marvell,dfx-server
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+# The DFX server may expose clocks described as subnodes
+additionalProperties:
+  type: object
+
+examples:
+  - |
+
+    #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+    bus@0 {
+        reg = <0 0>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        dfx-bus@ac000000 {
+            compatible = "marvell,dfx-server", "simple-bus";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+            reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+        };
+    };
diff --git a/dts/Bindings/net/marvell,pp2.yaml b/dts/Bindings/net/marvell,pp2.yaml
new file mode 100644
index 0000000000..4eadafc43d
--- /dev/null
+++ b/dts/Bindings/net/marvell,pp2.yaml
@@ -0,0 +1,305 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
+
+maintainers:
+  - Marcin Wojtas <mw@semihalf.com>
+  - Russell King <linux@armlinux.org>
+
+description: |
+  Marvell Armada 375 Ethernet Controller (PPv2.1)
+  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+  Marvell CN913X Ethernet Controller (PPv2.3)
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-375-pp2
+      - marvell,armada-7k-pp22
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    items:
+      - description: main controller clock
+      - description: GOP clock
+      - description: MG clock
+      - description: MG Core clock
+      - description: AXI clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pp_clk
+      - const: gop_clk
+      - const: mg_clk
+      - const: mg_core_clk
+      - const: axi_clk
+
+  dma-coherent: true
+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the system controller.
+
+patternProperties:
+  '^(ethernet-)?port@[0-2]$':
+    type: object
+    description: subnode for each ethernet port.
+    $ref: ethernet-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: ID of the port from the MAC point of view.
+        maximum: 2
+
+      interrupts:
+        minItems: 1
+        maxItems: 10
+        description: interrupt(s) for the port
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: hif0
+          - const: hif1
+          - const: hif2
+          - const: hif3
+          - const: hif4
+          - const: hif5
+          - const: hif6
+          - const: hif7
+          - const: hif8
+          - const: link
+
+        description: >
+          if more than a single interrupt for is given, must be the
+          name associated to the interrupts listed. Valid names are:
+          "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+          "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+          for backward compatibility but shouldn't be used for new
+          additions.
+
+      phys:
+        minItems: 1
+        maxItems: 2
+        description: >
+          Generic PHY, providing SerDes connectivity. For most modes,
+          one lane is sufficient, but some (e.g. RXAUI) may require two.
+
+      phy-mode:
+        enum:
+          - gmii
+          - sgmii
+          - rgmii-id
+          - 1000base-x
+          - 2500base-x
+          - 5gbase-r
+          - rxaui
+          - 10gbase-r
+
+      port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        deprecated: true
+        description: >
+          ID of the port from the MAC point of view.
+          Legacy binding for backward compatibility.
+
+      marvell,loopback:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: port is loopback mode.
+
+      gop-port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          only for marvell,armada-7k-pp22, ID of the port from the
+          GOP (Group Of Ports) point of view. This ID is used to index the
+          per-port registers in the second register area.
+
+    required:
+      - reg
+      - interrupts
+      - phy-mode
+      - port-id
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: marvell,armada-7k-pp22
+    then:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: Networking interfaces registers
+            - description: CM3 address space used for TX Flow Control
+
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+
+      patternProperties:
+        '^(ethernet-)?port@[0-2]$':
+          required:
+            - gop-port-id
+
+      required:
+        - marvell,system-controller
+    else:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: LMS registers
+            - description: Register area per eth0
+            - description: Register area per eth1
+
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+      patternProperties:
+        '^(ethernet-)?port@[0-1]$':
+          properties:
+            reg:
+              maximum: 1
+
+            gop-port-id: false
+
+additionalProperties: false
+
+examples:
+  - |
+    // For Armada 375 variant
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@f0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-375-pp2";
+        reg = <0xf0000 0xa000>,
+              <0xc0000 0x3060>,
+              <0xc4000 0x100>,
+              <0xc5000 0x100>;
+        clocks = <&gateclk 3>, <&gateclk 19>;
+        clock-names = "pp_clk", "gop_clk";
+
+        ethernet-port@0 {
+            interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            phy = <&phy0>;
+            phy-mode = "rgmii-id";
+        };
+
+        ethernet-port@1 {
+            interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            phy = <&phy3>;
+            phy-mode = "gmii";
+        };
+    };
+
+  - |
+    // For Armada 7k/8k and Cn913x variants
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-7k-pp22";
+        reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+        clocks = <&cp0_clk 1 3>, <&cp0_clk 1 9>,
+                 <&cp0_clk 1 5>, <&cp0_clk 1 6>, <&cp0_clk 1 18>;
+        clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
+        marvell,system-controller = <&cp0_syscon0>;
+
+        ethernet-port@0 {
+            interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "10gbase-r";
+            phys = <&cp0_comphy4 0>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            gop-port-id = <0>;
+        };
+
+        ethernet-port@1 {
+            interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "rgmii-id";
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            gop-port-id = <2>;
+        };
+
+        ethernet-port@2 {
+            interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "2500base-x";
+            managed = "in-band-status";
+            phys = <&cp0_comphy5 2>;
+            sfp = <&sfp_eth3>;
+            reg = <2>;
+            port-id = <2>; /* For backward compatibility. */
+            gop-port-id = <3>;
+        };
+    };
diff --git a/dts/Bindings/net/marvell,prestera.txt b/dts/Bindings/net/marvell,prestera.txt
deleted file mode 100644
index e28938ddfd..0000000000
--- a/dts/Bindings/net/marvell,prestera.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Marvell Prestera Switch Chip bindings
--------------------------------------
-
-Required properties:
-- compatible: must be "marvell,prestera" and one of the following
-	"marvell,prestera-98dx3236",
-	"marvell,prestera-98dx3336",
-	"marvell,prestera-98dx4251",
-- reg: address and length of the register set for the device.
-- interrupts: interrupt for the device
-
-Optional properties:
-- dfx: phandle reference to the "DFX Server" node
-
-Example:
-
-switch {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
-
-	packet-processor@0 {
-		compatible = "marvell,prestera-98dx3236", "marvell,prestera";
-		reg = <0 0x4000000>;
-		interrupts = <33>, <34>, <35>;
-		dfx = <&dfx>;
-	};
-};
-
-DFX Server bindings
--------------------
-
-Required properties:
-- compatible: must be "marvell,dfx-server", "simple-bus"
-- ranges: describes the address mapping of a memory-mapped bus.
-- reg: address and length of the register set for the device.
-
-Example:
-
-dfx-server {
-	compatible = "marvell,dfx-server", "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
-};
-
-Marvell Prestera SwitchDev bindings
------------------------------------
-Optional properties:
-- compatible: must be "marvell,prestera"
-- base-mac-provider: describes handle to node which provides base mac address,
-	might be a static base mac address or nvme cell provider.
-
-Example:
-
-eeprom_mac_addr: eeprom-mac-addr {
-       compatible = "eeprom,mac-addr-cell";
-       status = "okay";
-
-       nvmem = <&eeprom_at24>;
-};
-
-prestera {
-       compatible = "marvell,prestera";
-       status = "okay";
-
-       base-mac-provider = <&eeprom_mac_addr>;
-};
-
-The current implementation of Prestera Switchdev PCI interface driver requires
-that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
-
-&cp0_pcie0 {
-	ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
-		0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
-		0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
-	phys = <&cp0_comphy0 0>;
-	status = "okay";
-};
diff --git a/dts/Bindings/net/marvell,prestera.yaml b/dts/Bindings/net/marvell,prestera.yaml
new file mode 100644
index 0000000000..5ea8b73663
--- /dev/null
+++ b/dts/Bindings/net/marvell,prestera.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,prestera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Prestera switch family
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - marvell,prestera-98dx3236
+              - marvell,prestera-98dx3336
+              - marvell,prestera-98dx4251
+          - const: marvell,prestera
+      - enum:
+          - pci11ab,c804
+          - pci11ab,c80c
+          - pci11ab,cc1e
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  dfx:
+    description: Reference to the DFX Server bus node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: marvell,prestera
+
+# Memory mapped AlleyCat3 family
+then:
+  properties:
+    nvmem-cells: false
+    nvmem-cell-names: false
+  required:
+    - interrupts
+
+# PCI Aldrin family
+else:
+  properties:
+    interrupts: false
+    dfx: false
+
+required:
+  - compatible
+  - reg
+
+# Ports can also be described
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    packet-processor@0 {
+        compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+        reg = <0 0x4000000>;
+        interrupts = <33>, <34>, <35>;
+        dfx = <&dfx>;
+    };
+
+  - |
+    pcie@0 {
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        reg = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        device_type = "pci";
+
+        switch@0,0 {
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            compatible = "pci11ab,c80c";
+            nvmem-cells = <&mac_address 0>;
+            nvmem-cell-names = "mac-address";
+        };
+    };
diff --git a/dts/Bindings/net/marvell-pp2.txt b/dts/Bindings/net/marvell-pp2.txt
deleted file mode 100644
index ce15c173f4..0000000000
--- a/dts/Bindings/net/marvell-pp2.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-* Marvell Armada 375 Ethernet Controller (PPv2.1)
-  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
-  Marvell CN913X Ethernet Controller (PPv2.3)
-
-Required properties:
-
-- compatible: should be one of:
-    "marvell,armada-375-pp2"
-    "marvell,armada-7k-pp2"
-- reg: addresses and length of the register sets for the device.
-  For "marvell,armada-375-pp2", must contain the following register
-  sets:
-	- common controller registers
-	- LMS registers
-	- one register area per Ethernet port
-  For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
-  sets:
-	- packet processor registers
-	- networking interfaces registers
-	- CM3 address space used for TX Flow Control
-
-- clocks: pointers to the reference clocks for this device, consequently:
-	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
-	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
-	- MG clock (only for armada-7k-pp2)
-	- MG Core clock (only for armada-7k-pp2)
-	- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
-  "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
-
-The ethernet ports are represented by subnodes. At least one port is
-required.
-
-Required properties (port):
-
-- interrupts: interrupt(s) for the port
-- port-id: ID of the port from the MAC point of view
-- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
-  GOP (Group Of Ports) point of view. This ID is used to index the
-  per-port registers in the second register area.
-- phy-mode: See ethernet.txt file in the same directory
-
-Optional properties (port):
-
-- marvell,loopback: port is loopback mode
-- phy: a phandle to a phy node defining the PHY address (as the reg
-  property, a single integer).
-- interrupt-names: if more than a single interrupt for is given, must be the
-                   name associated to the interrupts listed. Valid names are:
-                   "hifX", with X in [0..8], and "link". The names "tx-cpu0",
-                   "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
-                   for backward compatibility but shouldn't be used for new
-                   additions.
-- marvell,system-controller: a phandle to the system controller.
-
-Example for marvell,armada-375-pp2:
-
-ethernet@f0000 {
-	compatible = "marvell,armada-375-pp2";
-	reg = <0xf0000 0xa000>,
-	      <0xc0000 0x3060>,
-	      <0xc4000 0x100>,
-	      <0xc5000 0x100>;
-	clocks = <&gateclk 3>, <&gateclk 19>;
-	clock-names = "pp_clk", "gop_clk";
-
-	eth0: eth0@c4000 {
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		port-id = <0>;
-		phy = <&phy0>;
-		phy-mode = "gmii";
-	};
-
-	eth1: eth1@c5000 {
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		port-id = <1>;
-		phy = <&phy3>;
-		phy-mode = "gmii";
-	};
-};
-
-Example for marvell,armada-7k-pp2:
-
-cpm_ethernet: ethernet@0 {
-	compatible = "marvell,armada-7k-pp22";
-	reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
-	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
-		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
-	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
-
-	eth0: eth0 {
-		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <0>;
-		gop-port-id = <0>;
-	};
-
-	eth1: eth1 {
-		interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <1>;
-		gop-port-id = <2>;
-	};
-
-	eth2: eth2 {
-		interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <2>;
-		gop-port-id = <3>;
-	};
-};
diff --git a/dts/Bindings/net/mctp-i2c-controller.yaml b/dts/Bindings/net/mctp-i2c-controller.yaml
index afd11c9422..8438af53c5 100644
--- a/dts/Bindings/net/mctp-i2c-controller.yaml
+++ b/dts/Bindings/net/mctp-i2c-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MCTP I2C transport binding
+title: MCTP I2C transport
 
 maintainers:
   - Matt Johnston <matt@codeconstruct.com.au>
diff --git a/dts/Bindings/net/mdio.yaml b/dts/Bindings/net/mdio.yaml
index b5706d4e7e..a266ade918 100644
--- a/dts/Bindings/net/mdio.yaml
+++ b/dts/Bindings/net/mdio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/mdio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MDIO Bus Generic Binding
+title: MDIO Bus Common Properties
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
diff --git a/dts/Bindings/net/micrel,ks8851.yaml b/dts/Bindings/net/micrel,ks8851.yaml
index 5aa7cf2eac..b44d83554e 100644
--- a/dts/Bindings/net/micrel,ks8851.yaml
+++ b/dts/Bindings/net/micrel,ks8851.yaml
@@ -44,6 +44,7 @@ required:
 
 allOf:
   - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
   - if:
       properties:
         compatible:
diff --git a/dts/Bindings/net/microchip,lan95xx.yaml b/dts/Bindings/net/microchip,lan95xx.yaml
index cf91fecd89..0b97e14d94 100644
--- a/dts/Bindings/net/microchip,lan95xx.yaml
+++ b/dts/Bindings/net/microchip,lan95xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: The device tree bindings for the USB Ethernet controllers
+title: Microchip SMSC9500/LAN9530/LAN9730 USB Ethernet Controllers
 
 maintainers:
   - Oleksij Rempel <o.rempel@pengutronix.de>
@@ -39,7 +39,9 @@ properties:
           - usb424,9e08   # SMSC LAN89530 USB Ethernet Device
           - usb424,ec00   # SMSC9512/9514 USB Hub & Ethernet Device
 
-  reg: true
+  reg:
+    maxItems: 1
+
   local-mac-address: true
   mac-address: true
 
diff --git a/dts/Bindings/net/nfc/nxp,nci.yaml b/dts/Bindings/net/nfc/nxp,nci.yaml
index b255842126..6924aff0b2 100644
--- a/dts/Bindings/net/nfc/nxp,nci.yaml
+++ b/dts/Bindings/net/nfc/nxp,nci.yaml
@@ -14,7 +14,9 @@ properties:
     oneOf:
       - const: nxp,nxp-nci-i2c
       - items:
-          - const: nxp,pn547
+          - enum:
+              - nxp,nq310
+              - nxp,pn547
           - const: nxp,nxp-nci-i2c
 
   enable-gpios:
diff --git a/dts/Bindings/net/nxp,dwmac-imx.yaml b/dts/Bindings/net/nxp,dwmac-imx.yaml
index 4c155441ac..04df496af7 100644
--- a/dts/Bindings/net/nxp,dwmac-imx.yaml
+++ b/dts/Bindings/net/nxp,dwmac-imx.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP i.MX8 DWMAC glue layer
 
 maintainers:
-  - Joakim Zhang <qiangqing.zhang@nxp.com>
+  - Clark Wang <xiaoning.wang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - NXP Linux Team <linux-imx@nxp.com>
 
 # We need a select here so we don't match all nodes with 'snps,dwmac'
 select:
@@ -92,5 +94,4 @@ examples:
                      <&clk IMX8MP_CLK_ENET_QOS>;
             clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
             phy-mode = "rgmii";
-            status = "disabled";
     };
diff --git a/dts/Bindings/net/pcs/fsl,lynx-pcs.yaml b/dts/Bindings/net/pcs/fsl,lynx-pcs.yaml
new file mode 100644
index 0000000000..fbedf696c5
--- /dev/null
+++ b/dts/Bindings/net/pcs/fsl,lynx-pcs.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/fsl,lynx-pcs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Lynx PCS
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+description: |
+  NXP Lynx 10G and 28G SerDes have Ethernet PCS devices which can be used as
+  protocol controllers. They are accessible over the Ethernet interface's MDIO
+  bus.
+
+properties:
+  compatible:
+    const: fsl,lynx-pcs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio-bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qsgmii_pcs1: ethernet-pcs@1 {
+        compatible = "fsl,lynx-pcs";
+        reg = <1>;
+      };
+    };
diff --git a/dts/Bindings/net/qca,ar71xx.yaml b/dts/Bindings/net/qca,ar71xx.yaml
index 1ebf9e8c8a..89f94b31b5 100644
--- a/dts/Bindings/net/qca,ar71xx.yaml
+++ b/dts/Bindings/net/qca,ar71xx.yaml
@@ -123,7 +123,6 @@ examples:
 
                     switch_port0: port@0 {
                         reg = <0x0>;
-                        label = "cpu";
                         ethernet = <&eth1>;
 
                         phy-mode = "gmii";
diff --git a/dts/Bindings/net/qcom,ipa.yaml b/dts/Bindings/net/qcom,ipa.yaml
index dd4bb2e748..4aeda37972 100644
--- a/dts/Bindings/net/qcom,ipa.yaml
+++ b/dts/Bindings/net/qcom,ipa.yaml
@@ -49,6 +49,7 @@ properties:
       - qcom,sc7280-ipa
       - qcom,sdm845-ipa
       - qcom,sdx55-ipa
+      - qcom,sm6350-ipa
       - qcom,sm8350-ipa
 
   reg:
@@ -124,19 +125,31 @@ properties:
       - const: ipa-clock-enabled-valid
       - const: ipa-clock-enabled
 
+  qcom,gsi-loader:
+    enum:
+      - self
+      - modem
+      - skip
+    description:
+      Indicates how GSI firmware should be loaded.  If the AP loads
+      and validates GSI firmware, this property has value "self".
+      If the modem does this, this property has value "modem".
+      Otherwise, "skip" means GSI firmware loading is not required.
+
   modem-init:
+    deprecated: true
     type: boolean
     description:
-      If present, it indicates that the modem is responsible for
-      performing early IPA initialization, including loading and
-      validating firwmare used by the GSI.
+      This is the older (deprecated) way of indicating how GSI firmware
+      should be loaded.  If present, the modem loads GSI firmware; if
+      absent, the AP loads GSI firmware.
 
   memory-region:
     maxItems: 1
     description:
       If present, a phandle for a reserved memory area that holds
       the firmware passed to Trust Zone for authentication.  Required
-      when Trust Zone (not the modem) performs early initialization.
+      when the AP (not the modem) performs early initialization.
 
   firmware-name:
     $ref: /schemas/types.yaml#/definitions/string
@@ -155,22 +168,36 @@ required:
   - interconnects
   - qcom,smem-states
 
-# Either modem-init is present, or memory-region must be present.
-oneOf:
-  - required:
-      - modem-init
-  - required:
-      - memory-region
-
-# If memory-region is present, firmware-name may optionally be present.
-# But if modem-init is present, firmware-name must not be present.
-if:
-  required:
-    - modem-init
-then:
-  not:
-    required:
-      - firmware-name
+allOf:
+  # If qcom,gsi-loader is present, modem-init must not be present
+  - if:
+      required:
+        - qcom,gsi-loader
+    then:
+      properties:
+        modem-init: false
+
+      # If qcom,gsi-loader is "self", the AP loads GSI firmware, and
+      # memory-region must be specified
+      if:
+        properties:
+          qcom,gsi-loader:
+            contains:
+              const: self
+      then:
+        required:
+          - memory-region
+    else:
+      # If qcom,gsi-loader is not present, we use deprecated behavior.
+      # If modem-init is not present, the AP loads GSI firmware, and
+      # memory-region must be specified.
+      if:
+        not:
+          required:
+            - modem-init
+      then:
+        required:
+          - memory-region
 
 additionalProperties: false
 
@@ -201,14 +228,17 @@ examples:
         };
 
         ipa@1e40000 {
-                compatible = "qcom,sdm845-ipa";
+                compatible = "qcom,sc7180-ipa";
 
-                modem-init;
+                qcom,gsi-loader = "self";
+                memory-region = <&ipa_fw_mem>;
+                firmware-name = "qcom/sc7180-trogdor/modem/modem.mdt";
 
-                iommus = <&apps_smmu 0x720 0x3>;
+                iommus = <&apps_smmu 0x440 0x0>,
+                         <&apps_smmu 0x442 0x0>;
                 reg = <0x1e40000 0x7000>,
-                        <0x1e47000 0x2000>,
-                        <0x1e04000 0x2c000>;
+                      <0x1e47000 0x2000>,
+                      <0x1e04000 0x2c000>;
                 reg-names = "ipa-reg",
                             "ipa-shared",
                             "gsi";
@@ -226,9 +256,9 @@ examples:
                 clock-names = "core";
 
                 interconnects =
-                        <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>,
-                        <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>,
-                        <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>;
+                        <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+                        <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
                 interconnect-names = "memory",
                                      "imem",
                                      "config";
diff --git a/dts/Bindings/net/qcom,ipq4019-mdio.yaml b/dts/Bindings/net/qcom,ipq4019-mdio.yaml
index ad8b2b41c1..7631ecc8fd 100644
--- a/dts/Bindings/net/qcom,ipq4019-mdio.yaml
+++ b/dts/Bindings/net/qcom,ipq4019-mdio.yaml
@@ -9,14 +9,18 @@ title: Qualcomm IPQ40xx MDIO Controller
 maintainers:
   - Robert Marko <robert.marko@sartura.hr>
 
-allOf:
-  - $ref: "mdio.yaml#"
-
 properties:
   compatible:
-    enum:
-      - qcom,ipq4019-mdio
-      - qcom,ipq5018-mdio
+    oneOf:
+      - enum:
+          - qcom,ipq4019-mdio
+          - qcom,ipq5018-mdio
+
+      - items:
+          - enum:
+              - qcom,ipq6018-mdio
+              - qcom,ipq8074-mdio
+          - const: qcom,ipq4019-mdio
 
   "#address-cells":
     const: 1
@@ -33,10 +37,12 @@ properties:
       address range is only required by the platform IPQ50xx.
 
   clocks:
-    maxItems: 1
-    description: |
-      MDIO clock source frequency fixed to 100MHZ, this clock should be specified
-      by the platform IPQ807x, IPQ60xx and IPQ50xx.
+    items:
+      - description: MDIO clock source frequency fixed to 100MHZ
+
+  clock-names:
+    items:
+      - const: gcc_mdio_ahb_clk
 
 required:
   - compatible
@@ -44,6 +50,26 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+allOf:
+  - $ref: "mdio.yaml#"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5018-mdio
+              - qcom,ipq6018-mdio
+              - qcom,ipq8074-mdio
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/Bindings/net/realtek-bluetooth.yaml b/dts/Bindings/net/realtek-bluetooth.yaml
index e329ef06e1..143b5667ab 100644
--- a/dts/Bindings/net/realtek-bluetooth.yaml
+++ b/dts/Bindings/net/realtek-bluetooth.yaml
@@ -20,6 +20,7 @@ properties:
     enum:
       - realtek,rtl8723bs-bt
       - realtek,rtl8723cs-bt
+      - realtek,rtl8723ds-bt
       - realtek,rtl8822cs-bt
 
   device-wake-gpios:
diff --git a/dts/Bindings/net/renesas,r8a779f0-ether-switch.yaml b/dts/Bindings/net/renesas,r8a779f0-ether-switch.yaml
new file mode 100644
index 0000000000..e933a1e48d
--- /dev/null
+++ b/dts/Bindings/net/renesas,r8a779f0-ether-switch.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,r8a779f0-ether-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet Switch
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ether-switch
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: secure_base
+
+  interrupts:
+    maxItems: 47
+
+  interrupt-names:
+    items:
+      - const: mfwd_error
+      - const: race_error
+      - const: coma_error
+      - const: gwca0_error
+      - const: gwca1_error
+      - const: etha0_error
+      - const: etha1_error
+      - const: etha2_error
+      - const: gptp0_status
+      - const: gptp1_status
+      - const: mfwd_status
+      - const: race_status
+      - const: coma_status
+      - const: gwca0_status
+      - const: gwca1_status
+      - const: etha0_status
+      - const: etha1_status
+      - const: etha2_status
+      - const: rmac0_status
+      - const: rmac1_status
+      - const: rmac2_status
+      - const: gwca0_rxtx0
+      - const: gwca0_rxtx1
+      - const: gwca0_rxtx2
+      - const: gwca0_rxtx3
+      - const: gwca0_rxtx4
+      - const: gwca0_rxtx5
+      - const: gwca0_rxtx6
+      - const: gwca0_rxtx7
+      - const: gwca1_rxtx0
+      - const: gwca1_rxtx1
+      - const: gwca1_rxtx2
+      - const: gwca1_rxtx3
+      - const: gwca1_rxtx4
+      - const: gwca1_rxtx5
+      - const: gwca1_rxtx6
+      - const: gwca1_rxtx7
+      - const: gwca0_rxts0
+      - const: gwca0_rxts1
+      - const: gwca1_rxts0
+      - const: gwca1_rxts1
+      - const: rmac0_mdio
+      - const: rmac1_mdio
+      - const: rmac2_mdio
+      - const: rmac0_phy
+      - const: rmac1_phy
+      - const: rmac2_phy
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 16
+
+  power-domains:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        description: Port number of ETHA (TSNA).
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              Port number of ETHA (TSNA).
+
+          phys:
+            maxItems: 1
+            description:
+              Phandle of an Ethernet SERDES.
+
+          mdio:
+            $ref: /schemas/net/mdio.yaml#
+            unevaluatedProperties: false
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+          - phys
+          - mdio
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - power-domains
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    ethernet@e6880000 {
+        compatible = "renesas,r8a779f0-ether-switch";
+        reg = <0xe6880000 0x20000>, <0xe68c0000 0x20000>;
+        reg-names = "base", "secure_base";
+        interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "mfwd_error", "race_error",
+                          "coma_error", "gwca0_error",
+                          "gwca1_error", "etha0_error",
+                          "etha1_error", "etha2_error",
+                          "gptp0_status", "gptp1_status",
+                          "mfwd_status", "race_status",
+                          "coma_status", "gwca0_status",
+                          "gwca1_status", "etha0_status",
+                          "etha1_status", "etha2_status",
+                          "rmac0_status", "rmac1_status",
+                          "rmac2_status",
+                          "gwca0_rxtx0", "gwca0_rxtx1",
+                          "gwca0_rxtx2", "gwca0_rxtx3",
+                          "gwca0_rxtx4", "gwca0_rxtx5",
+                          "gwca0_rxtx6", "gwca0_rxtx7",
+                          "gwca1_rxtx0", "gwca1_rxtx1",
+                          "gwca1_rxtx2", "gwca1_rxtx3",
+                          "gwca1_rxtx4", "gwca1_rxtx5",
+                          "gwca1_rxtx6", "gwca1_rxtx7",
+                          "gwca0_rxts0", "gwca0_rxts1",
+                          "gwca1_rxts0", "gwca1_rxts1",
+                          "rmac0_mdio", "rmac1_mdio",
+                          "rmac2_mdio",
+                          "rmac0_phy", "rmac1_phy",
+                          "rmac2_phy";
+        clocks = <&cpg CPG_MOD 1505>;
+        power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+        resets = <&cpg 1505>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                phy-handle = <&eth_phy0>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 0>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                phy-handle = <&eth_phy1>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 1>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+            port@2 {
+                reg = <2>;
+                phy-handle = <&eth_phy2>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 2>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/net/sff,sfp.yaml b/dts/Bindings/net/sff,sfp.yaml
index 06c66ab81c..231c4d75e4 100644
--- a/dts/Bindings/net/sff,sfp.yaml
+++ b/dts/Bindings/net/sff,sfp.yaml
@@ -22,7 +22,8 @@ properties:
       phandle of an I2C bus controller for the SFP two wire serial
 
   maximum-power-milliwatt:
-    maxItems: 1
+    minimum: 1000
+    default: 1000
     description:
       Maximum module power consumption Specifies the maximum power consumption
       allowable by a module in the slot, in milli-Watts. Presently, modules can
diff --git a/dts/Bindings/net/snps,dwmac.yaml b/dts/Bindings/net/snps,dwmac.yaml
index 13b984076a..e88a86623f 100644
--- a/dts/Bindings/net/snps,dwmac.yaml
+++ b/dts/Bindings/net/snps,dwmac.yaml
@@ -167,56 +167,238 @@ properties:
   snps,mtl-rx-config:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Multiple RX Queues parameters. Phandle to a node that can
-      contain the following properties
-        * snps,rx-queues-to-use, number of RX queues to be used in the
-          driver
-        * Choose one of these RX scheduling algorithms
-          * snps,rx-sched-sp, Strict priority
-          * snps,rx-sched-wsp, Weighted Strict priority
-        * For each RX queue
-          * Choose one of these modes
-            * snps,dcb-algorithm, Queue to be enabled as DCB
-            * snps,avb-algorithm, Queue to be enabled as AVB
-          * snps,map-to-dma-channel, Channel to map
-          * Specifiy specific packet routing
-            * snps,route-avcp, AV Untagged Control packets
-            * snps,route-ptp, PTP Packets
-            * snps,route-dcbcp, DCB Control Packets
-            * snps,route-up, Untagged Packets
-            * snps,route-multi-broad, Multicast & Broadcast Packets
-          * snps,priority, bitmask of the tagged frames priorities assigned to
-            the queue
+      Multiple RX Queues parameters. Phandle to a node that
+      implements the 'rx-queues-config' object described in
+      this binding.
+
+  rx-queues-config:
+    type: object
+    properties:
+      snps,rx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of RX queues to be used in the driver
+      snps,rx-sched-sp:
+        type: boolean
+        description: Strict priority
+      snps,rx-sched-wsp:
+        type: boolean
+        description: Weighted Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,rx-sched-sp
+        then:
+          properties:
+            snps,rx-sched-wsp: false
+      - if:
+          required:
+            - snps,rx-sched-wsp
+        then:
+          properties:
+            snps,rx-sched-sp: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,dcb-algorithm:
+            type: boolean
+            description: Queue to be enabled as DCB
+          snps,avb-algorithm:
+            type: boolean
+            description: Queue to be enabled as AVB
+          snps,map-to-dma-channel:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: DMA channel id to map
+          snps,route-avcp:
+            type: boolean
+            description: AV Untagged Control packets
+          snps,route-ptp:
+            type: boolean
+            description: PTP Packets
+          snps,route-dcbcp:
+            type: boolean
+            description: DCB Control Packets
+          snps,route-up:
+            type: boolean
+            description: Untagged Packets
+          snps,route-multi-broad:
+            type: boolean
+            description: Multicast & Broadcast Packets
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Bitmask of the tagged frames priorities assigned to the queue
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+          - if:
+              required:
+                - snps,route-avcp
+            then:
+              properties:
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-ptp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-dcbcp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-up
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-multi-broad
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+        additionalProperties: false
+    additionalProperties: false
 
   snps,mtl-tx-config:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Multiple TX Queues parameters. Phandle to a node that can
-      contain the following properties
-        * snps,tx-queues-to-use, number of TX queues to be used in the
-          driver
-        * Choose one of these TX scheduling algorithms
-          * snps,tx-sched-wrr, Weighted Round Robin
-          * snps,tx-sched-wfq, Weighted Fair Queuing
-          * snps,tx-sched-dwrr, Deficit Weighted Round Robin
-          * snps,tx-sched-sp, Strict priority
-        * For each TX queue
-          * snps,weight, TX queue weight (if using a DCB weight
-            algorithm)
-          * Choose one of these modes
-            * snps,dcb-algorithm, TX queue will be working in DCB
-            * snps,avb-algorithm, TX queue will be working in AVB
-              [Attention] Queue 0 is reserved for legacy traffic
-                          and so no AVB is available in this queue.
-          * Configure Credit Base Shaper (if AVB Mode selected)
-            * snps,send_slope, enable Low Power Interface
-            * snps,idle_slope, unlock on WoL
-            * snps,high_credit, max write outstanding req. limit
-            * snps,low_credit, max read outstanding req. limit
-          * snps,priority, bitmask of the priorities assigned to the queue.
-            When a PFC frame is received with priorities matching the bitmask,
-            the queue is blocked from transmitting for the pause time specified
-            in the PFC frame.
+      Multiple TX Queues parameters. Phandle to a node that
+      implements the 'tx-queues-config' object described in
+      this binding.
+
+  tx-queues-config:
+    type: object
+    properties:
+      snps,tx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of TX queues to be used in the driver
+      snps,tx-sched-wrr:
+        type: boolean
+        description: Weighted Round Robin
+      snps,tx-sched-wfq:
+        type: boolean
+        description: Weighted Fair Queuing
+      snps,tx-sched-dwrr:
+        type: boolean
+        description: Deficit Weighted Round Robin
+      snps,tx-sched-sp:
+        type: boolean
+        description: Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,tx-sched-wrr
+        then:
+          properties:
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-wfq
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-dwrr
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-sp
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,weight:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: TX queue weight (if using a DCB weight algorithm)
+          snps,dcb-algorithm:
+            type: boolean
+            description: TX queue will be working in DCB
+          snps,avb-algorithm:
+            type: boolean
+            description:
+              TX queue will be working in AVB.
+              Queue 0 is reserved for legacy traffic and so no AVB is
+              available in this queue.
+          snps,send_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: enable Low Power Interface
+          snps,idle_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: unlock on WoL
+          snps,high_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max write outstanding req. limit
+          snps,low_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max read outstanding req. limit
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Bitmask of the tagged frames priorities assigned to the queue.
+              When a PFC frame is received with priorities matching the bitmask,
+              the queue is blocked from transmitting for the pause time specified
+              in the PFC frame.
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+                snps,weight: false
+        additionalProperties: false
+    additionalProperties: false
 
   snps,reset-gpio:
     deprecated: true
@@ -463,41 +645,6 @@ additionalProperties: true
 
 examples:
   - |
-    stmmac_axi_setup: stmmac-axi-config {
-        snps,wr_osr_lmt = <0xf>;
-        snps,rd_osr_lmt = <0xf>;
-        snps,blen = <256 128 64 32 0 0 0>;
-    };
-
-    mtl_rx_setup: rx-queues-config {
-        snps,rx-queues-to-use = <1>;
-        snps,rx-sched-sp;
-        queue0 {
-            snps,dcb-algorithm;
-            snps,map-to-dma-channel = <0x0>;
-            snps,priority = <0x0>;
-        };
-    };
-
-    mtl_tx_setup: tx-queues-config {
-        snps,tx-queues-to-use = <2>;
-        snps,tx-sched-wrr;
-        queue0 {
-            snps,weight = <0x10>;
-            snps,dcb-algorithm;
-            snps,priority = <0x0>;
-        };
-
-        queue1 {
-            snps,avb-algorithm;
-            snps,send_slope = <0x1000>;
-            snps,idle_slope = <0x1000>;
-            snps,high_credit = <0x3E800>;
-            snps,low_credit = <0xFFC18000>;
-            snps,priority = <0x1>;
-        };
-    };
-
     gmac0: ethernet@e0800000 {
         compatible = "snps,dwxgmac-2.10", "snps,dwxgmac";
         reg = <0xe0800000 0x8000>;
@@ -516,6 +663,42 @@ examples:
         snps,axi-config = <&stmmac_axi_setup>;
         snps,mtl-rx-config = <&mtl_rx_setup>;
         snps,mtl-tx-config = <&mtl_tx_setup>;
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,wr_osr_lmt = <0xf>;
+            snps,rd_osr_lmt = <0xf>;
+            snps,blen = <256 128 64 32 0 0 0>;
+        };
+
+        mtl_rx_setup: rx-queues-config {
+            snps,rx-queues-to-use = <1>;
+            snps,rx-sched-sp;
+            queue0 {
+                snps,dcb-algorithm;
+                snps,map-to-dma-channel = <0x0>;
+                snps,priority = <0x0>;
+            };
+        };
+
+        mtl_tx_setup: tx-queues-config {
+            snps,tx-queues-to-use = <2>;
+            snps,tx-sched-wrr;
+            queue0 {
+                snps,weight = <0x10>;
+                snps,dcb-algorithm;
+                snps,priority = <0x0>;
+            };
+
+            queue1 {
+                snps,avb-algorithm;
+                snps,send_slope = <0x1000>;
+                snps,idle_slope = <0x1000>;
+                snps,high_credit = <0x3E800>;
+                snps,low_credit = <0xFFC18000>;
+                snps,priority = <0x1>;
+            };
+        };
+
         mdio0 {
             #address-cells = <1>;
             #size-cells = <0>;
diff --git a/dts/Bindings/net/socionext,synquacer-netsec.yaml b/dts/Bindings/net/socionext,synquacer-netsec.yaml
new file mode 100644
index 0000000000..a65e6aa215
--- /dev/null
+++ b/dts/Bindings/net/socionext,synquacer-netsec.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/socionext,synquacer-netsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext NetSec Ethernet Controller IP
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+  - Ilias Apalodimas <ilias.apalodimas@linaro.org>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-netsec
+
+  reg:
+    items:
+      - description: control register area
+      - description: EEPROM holding the MAC address and microengine firmware
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phy_ref_clk
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  mdio:
+    $ref: mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@522d0000 {
+        compatible = "socionext,synquacer-netsec";
+        reg = <0x522d0000 0x10000>, <0x10000000 0x10000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_netsec>;
+        clock-names = "phy_ref_clk";
+        phy-mode = "rgmii";
+        max-speed = <1000>;
+        max-frame-size = <9000>;
+        phy-handle = <&phy1>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                compatible = "ethernet-phy-ieee802.3-c22";
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/net/socionext-netsec.txt b/dts/Bindings/net/socionext-netsec.txt
deleted file mode 100644
index a3c1dffaa4..0000000000
--- a/dts/Bindings/net/socionext-netsec.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Socionext NetSec Ethernet Controller IP
-
-Required properties:
-- compatible: Should be "socionext,synquacer-netsec"
-- reg: Address and length of the control register area, followed by the
-       address and length of the EEPROM holding the MAC address and
-       microengine firmware
-- interrupts: Should contain ethernet controller interrupt
-- clocks: phandle to the PHY reference clock
-- clock-names: Should be "phy_ref_clk"
-- phy-mode: See ethernet.txt file in the same directory
-- phy-handle: See ethernet.txt in the same directory.
-
-- mdio device tree subnode: When the Netsec has a phy connected to its local
-		mdio, there must be device tree subnode with the following
-		required properties:
-
-	- #address-cells: Must be <1>.
-	- #size-cells: Must be <0>.
-
-	For each phy on the mdio bus, there must be a node with the following
-	fields:
-	- compatible: Refer to phy.txt
-	- reg: phy id used to communicate to phy.
-
-Optional properties: (See ethernet.txt file in the same directory)
-- dma-coherent: Boolean property, must only be present if memory
-	accesses performed by the device are cache coherent.
-- max-speed: See ethernet.txt in the same directory.
-- max-frame-size: See ethernet.txt in the same directory.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt. The 'phy-mode' property is required, but may
-be set to the empty string if the PHY configuration is programmed by
-the firmware or set by hardware straps, and needs to be preserved.
-
-Example:
-	eth0: ethernet@522d0000 {
-		compatible = "socionext,synquacer-netsec";
-		reg = <0 0x522d0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>;
-		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk_netsec>;
-		clock-names = "phy_ref_clk";
-		phy-mode = "rgmii";
-		max-speed = <1000>;
-		max-frame-size = <9000>;
-		phy-handle = <&phy1>;
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy1: ethernet-phy@1 {
-				compatible = "ethernet-phy-ieee802.3-c22";
-				reg = <1>;
-			};
-		};
diff --git a/dts/Bindings/net/wireless/esp,esp8089.yaml b/dts/Bindings/net/wireless/esp,esp8089.yaml
index 284ef45add..5557676e9d 100644
--- a/dts/Bindings/net/wireless/esp,esp8089.yaml
+++ b/dts/Bindings/net/wireless/esp,esp8089.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/wireless/esp,esp8089.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Espressif ESP8089 Device Tree Bindings
+title: Espressif ESP8089
 
 maintainers:
   - Hans de Goede <hdegoede@redhat.com>
diff --git a/dts/Bindings/net/wireless/ieee80211.yaml b/dts/Bindings/net/wireless/ieee80211.yaml
index d58e1571df..e68ed94231 100644
--- a/dts/Bindings/net/wireless/ieee80211.yaml
+++ b/dts/Bindings/net/wireless/ieee80211.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common IEEE 802.11 Binding
+title: Common IEEE 802.11
 
 maintainers:
   - Lorenzo Bianconi <lorenzo@kernel.org>
diff --git a/dts/Bindings/net/wireless/mediatek,mt76.yaml b/dts/Bindings/net/wireless/mediatek,mt76.yaml
index 70e328589c..f0c78f9944 100644
--- a/dts/Bindings/net/wireless/mediatek,mt76.yaml
+++ b/dts/Bindings/net/wireless/mediatek,mt76.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek mt76 wireless devices Generic Binding
+title: MediaTek mt76 wireless devices
 
 maintainers:
   - Felix Fietkau <nbd@nbd.name>
diff --git a/dts/Bindings/net/wireless/microchip,wilc1000.yaml b/dts/Bindings/net/wireless/microchip,wilc1000.yaml
index b3405f2845..2460ccc082 100644
--- a/dts/Bindings/net/wireless/microchip,wilc1000.yaml
+++ b/dts/Bindings/net/wireless/microchip,wilc1000.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip WILC wireless devicetree bindings
+title: Microchip WILC wireless
 
 maintainers:
   - Adham Abozaeid <adham.abozaeid@microchip.com>
diff --git a/dts/Bindings/net/wireless/qca,ath9k.yaml b/dts/Bindings/net/wireless/qca,ath9k.yaml
index 7029cb1f38..0e5412cff2 100644
--- a/dts/Bindings/net/wireless/qca,ath9k.yaml
+++ b/dts/Bindings/net/wireless/qca,ath9k.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Atheros ath9k wireless devices Generic Binding
+title: Qualcomm Atheros ath9k wireless devices
 
 maintainers:
   - Toke Høiland-Jørgensen <toke@toke.dk>
diff --git a/dts/Bindings/net/wireless/qcom,ath11k.yaml b/dts/Bindings/net/wireless/qcom,ath11k.yaml
index f7cf135aa3..556eb52360 100644
--- a/dts/Bindings/net/wireless/qcom,ath11k.yaml
+++ b/dts/Bindings/net/wireless/qcom,ath11k.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies ath11k wireless devices Generic Binding
+title: Qualcomm Technologies ath11k wireless devices
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
diff --git a/dts/Bindings/net/wireless/silabs,wfx.yaml b/dts/Bindings/net/wireless/silabs,wfx.yaml
index b35d2f3ad1..583db5d422 100644
--- a/dts/Bindings/net/wireless/silabs,wfx.yaml
+++ b/dts/Bindings/net/wireless/silabs,wfx.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Silicon Labs WFxxx devicetree bindings
+title: Silicon Labs WFxxx
 
 maintainers:
   - Jérôme Pouiller <jerome.pouiller@silabs.com>
diff --git a/dts/Bindings/net/xilinx_axienet.txt b/dts/Bindings/net/xilinx_axienet.txt
index 1aa4c6006c..80e505a2fd 100644
--- a/dts/Bindings/net/xilinx_axienet.txt
+++ b/dts/Bindings/net/xilinx_axienet.txt
@@ -68,6 +68,8 @@ Optional properties:
  - mdio		: Child node for MDIO bus. Must be defined if PHY access is
 		  required through the core's MDIO interface (i.e. always,
 		  unless the PHY is accessed through a different bus).
+		  Non-standard MDIO bus frequency is supported via
+		  "clock-frequency", see mdio.yaml.
 
  - pcs-handle: 	  Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
 		  modes, where "pcs-handle" should be used to point
diff --git a/dts/Bindings/nvmem/fsl,scu-ocotp.yaml b/dts/Bindings/nvmem/fsl,scu-ocotp.yaml
index 682688299b..f0a4928364 100644
--- a/dts/Bindings/nvmem/fsl,scu-ocotp.yaml
+++ b/dts/Bindings/nvmem/fsl,scu-ocotp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - OCOTP Based on SCU Message Protocol
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/nvmem/ingenic,jz4780-efuse.yaml b/dts/Bindings/nvmem/ingenic,jz4780-efuse.yaml
index bf84768228..fe2cd7f1af 100644
--- a/dts/Bindings/nvmem/ingenic,jz4780-efuse.yaml
+++ b/dts/Bindings/nvmem/ingenic,jz4780-efuse.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ EFUSE driver bindings
+title: Ingenic JZ EFUSE driver
 
 maintainers:
   - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
diff --git a/dts/Bindings/nvmem/layouts/kontron,sl28-vpd.yaml b/dts/Bindings/nvmem/layouts/kontron,sl28-vpd.yaml
new file mode 100644
index 0000000000..c713e23819
--- /dev/null
+++ b/dts/Bindings/nvmem/layouts/kontron,sl28-vpd.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/kontron,sl28-vpd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout of the Kontron SMARC-sAL28 vital product data
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description:
+  The vital product data (VPD) of the sl28 boards contains a serial
+  number and a base MAC address. The actual MAC addresses for the
+  on-board ethernet devices are derived from this base MAC address by
+  adding an offset.
+
+select: false
+
+properties:
+  compatible:
+    const: kontron,sl28-vpd
+
+  serial-number:
+    type: object
+    description: The board's serial number
+
+    additionalProperties: false
+
+  base-mac-address:
+    type: object
+    description:
+      Base MAC address for all on-module network interfaces. The first
+      argument of the phandle will be treated as an offset.
+
+    properties:
+      "#nvmem-cell-cells":
+        const: 1
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+      otp-1 {
+          compatible = "user-otp";
+
+          nvmem-layout {
+              compatible = "kontron,sl28-vpd";
+
+              serial_number: serial-number {
+              };
+
+              base_mac_address: base-mac-address {
+                  #nvmem-cell-cells = <1>;
+              };
+          };
+      };
+
+...
diff --git a/dts/Bindings/nvmem/layouts/nvmem-layout.yaml b/dts/Bindings/nvmem/layouts/nvmem-layout.yaml
new file mode 100644
index 0000000000..8512ee538c
--- /dev/null
+++ b/dts/Bindings/nvmem/layouts/nvmem-layout.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/nvmem-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM (Non Volatile Memory) layouts
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Michael Walle <michael@walle.cc>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  Most NVMEM layouts are static and thus do not require additional description
+  besides the bytes/bits offset and length. Other layouts can be less statically
+  define and might require dynamic reading of the NVMEM device in order to
+  perform their parsing. The nvmem-layout container is here to describe these.
+
+oneOf:
+  - $ref: kontron,sl28-vpd.yaml
+  - $ref: onie,tlv-layout.yaml
+
+properties:
+  compatible: true
+
+  '#address-cells': false
+
+  '#size-cells': false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/dts/Bindings/nvmem/layouts/onie,tlv-layout.yaml b/dts/Bindings/nvmem/layouts/onie,tlv-layout.yaml
new file mode 100644
index 0000000000..5a0e7671aa
--- /dev/null
+++ b/dts/Bindings/nvmem/layouts/onie,tlv-layout.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/onie,tlv-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout of the ONIE tlv table
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description:
+  Modern networking hardware implementing the Open Compute Project ONIE
+  infrastructure shall provide a non-volatile memory with a table whose the
+  content is well specified and gives many information about the manufacturer
+  (name, country of manufacture, etc) as well as device caracteristics (serial
+  number, hardware version, mac addresses, etc). The underlaying device type
+  (flash, EEPROM,...) is not specified. The exact location of each value is also
+  dynamic and should be discovered at run time because it depends on the
+  parameters the manufacturer decided to embed.
+
+select: false
+
+properties:
+  compatible:
+    const: onie,tlv-layout
+
+  product-name:
+    type: object
+    additionalProperties: false
+
+  part-number:
+    type: object
+    additionalProperties: false
+
+  serial-number:
+    type: object
+    additionalProperties: false
+
+  mac-address:
+    type: object
+    description:
+      Base MAC address for all on-module network interfaces. The first
+      argument of the phandle will be treated as an offset.
+
+    properties:
+      "#nvmem-cell-cells":
+        const: 1
+
+    additionalProperties: false
+
+  manufacture-date:
+    type: object
+    additionalProperties: false
+
+  device-version:
+    type: object
+    additionalProperties: false
+
+  label-revision:
+    type: object
+    additionalProperties: false
+
+  platforn-name:
+    type: object
+    additionalProperties: false
+
+  onie-version:
+    type: object
+    additionalProperties: false
+
+  num-macs:
+    type: object
+    additionalProperties: false
+
+  manufacturer:
+    type: object
+    additionalProperties: false
+
+  country-code:
+    type: object
+    additionalProperties: false
+
+  vendor:
+    type: object
+    additionalProperties: false
+
+  diag-version:
+    type: object
+    additionalProperties: false
+
+  service-tag:
+    type: object
+    additionalProperties: false
+
+  vendor-extension:
+    type: object
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@56 {
+            compatible = "atmel,24c64";
+            read-only;
+            reg = <0x56>;
+
+            nvmem-layout {
+                compatible = "onie,tlv-layout";
+
+                serial-number {
+                };
+            };
+        };
+    };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "m25p80", "jedec,spi-nor";
+            reg = <0>;
+
+            otp {
+                compatible = "user-otp";
+
+                nvmem-layout {
+                    compatible = "onie,tlv-layout";
+
+                    mac-address {
+                        #nvmem-cell-cells = <1>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/nvmem/nvmem.yaml b/dts/Bindings/nvmem/nvmem.yaml
index 1eb22dba36..75bb93dda9 100644
--- a/dts/Bindings/nvmem/nvmem.yaml
+++ b/dts/Bindings/nvmem/nvmem.yaml
@@ -39,6 +39,13 @@ properties:
       when it's driven low (logical '0') to allow writing.
     maxItems: 1
 
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml
+    description:
+      Alternative to the statically defined nvmem cells, this
+      container may reference more advanced (dynamic) layout
+      parsers.
+
 patternProperties:
   "@[0-9a-f]+(,[0-7])?$":
     type: object
@@ -67,6 +74,7 @@ examples:
       #include <dt-bindings/gpio/gpio.h>
 
       qfprom: eeprom@700000 {
+          compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
           #address-cells = <1>;
           #size-cells = <1>;
           reg = <0x00700000 0x100000>;
diff --git a/dts/Bindings/nvmem/qcom,qfprom.yaml b/dts/Bindings/nvmem/qcom,qfprom.yaml
index 2eab2f46cb..8e89b15b53 100644
--- a/dts/Bindings/nvmem/qcom,qfprom.yaml
+++ b/dts/Bindings/nvmem/qcom,qfprom.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies Inc, QFPROM Efuse bindings
+title: Qualcomm Technologies Inc, QFPROM Efuse
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
diff --git a/dts/Bindings/nvmem/qcom,spmi-sdam.yaml b/dts/Bindings/nvmem/qcom,spmi-sdam.yaml
index ee79e13b5f..e08504ef3b 100644
--- a/dts/Bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/dts/Bindings/nvmem/qcom,spmi-sdam.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/qcom,spmi-sdam.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. SPMI SDAM DT bindings
+title: Qualcomm Technologies, Inc. SPMI SDAM
 
 maintainers:
   - Shyam Kumar Thella <sthella@codeaurora.org>
diff --git a/dts/Bindings/nvmem/snvs-lpgpr.yaml b/dts/Bindings/nvmem/snvs-lpgpr.yaml
index e374aa7891..ec20e33d9b 100644
--- a/dts/Bindings/nvmem/snvs-lpgpr.yaml
+++ b/dts/Bindings/nvmem/snvs-lpgpr.yaml
@@ -11,14 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx6q-snvs-lpgpr
-      - fsl,imx6ul-snvs-lpgpr
-      - fsl,imx7d-snvs-lpgpr
-      - fsl,imx8mm-snvs-lpgpr
-      - fsl,imx8mn-snvs-lpgpr
-      - fsl,imx8mp-snvs-lpgpr
-      - fsl,imx8mq-snvs-lpgpr
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx8mm-snvs-lpgpr
+              - fsl,imx8mn-snvs-lpgpr
+              - fsl,imx8mp-snvs-lpgpr
+              - fsl,imx8mq-snvs-lpgpr
+          - const: fsl,imx7d-snvs-lpgpr
+      - enum:
+          - fsl,imx6q-snvs-lpgpr
+          - fsl,imx6ul-snvs-lpgpr
+          - fsl,imx7d-snvs-lpgpr
 
 required:
   - compatible
diff --git a/dts/Bindings/nvmem/socionext,uniphier-efuse.yaml b/dts/Bindings/nvmem/socionext,uniphier-efuse.yaml
index 2578e39ded..73a0c658db 100644
--- a/dts/Bindings/nvmem/socionext,uniphier-efuse.yaml
+++ b/dts/Bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/socionext,uniphier-efuse.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Socionext UniPhier eFuse bindings
+title: Socionext UniPhier eFuse
 
 maintainers:
   - Keiji Hayashibara <hayashibara.keiji@socionext.com>
diff --git a/dts/Bindings/nvmem/st,stm32-romem.yaml b/dts/Bindings/nvmem/st,stm32-romem.yaml
index 448a2678dc..172597cc5c 100644
--- a/dts/Bindings/nvmem/st,stm32-romem.yaml
+++ b/dts/Bindings/nvmem/st,stm32-romem.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/st,stm32-romem.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Factory-programmed data bindings
+title: STMicroelectronics STM32 Factory-programmed data
 
 description: |
   This represents STM32 Factory-programmed read only non-volatile area: locked
@@ -22,6 +22,7 @@ properties:
   compatible:
     enum:
       - st,stm32f4-otp
+      - st,stm32mp13-bsec
       - st,stm32mp15-bsec
 
   reg:
diff --git a/dts/Bindings/nvmem/u-boot,env.yaml b/dts/Bindings/nvmem/u-boot,env.yaml
index e96bca99f2..cbc5c69fd4 100644
--- a/dts/Bindings/nvmem/u-boot,env.yaml
+++ b/dts/Bindings/nvmem/u-boot,env.yaml
@@ -38,6 +38,8 @@ properties:
         const: u-boot,env-redundant-bool
       - description: Two redundant blocks with active having higher counter
         const: u-boot,env-redundant-count
+      - description: Broadcom's variant with custom header
+        const: brcm,env
 
   reg:
     maxItems: 1
@@ -73,3 +75,22 @@ examples:
             };
         };
     };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x100000>;
+            compatible = "brcm,u-boot";
+            label = "u-boot";
+
+            partition-u-boot-env {
+                compatible = "brcm,env";
+
+                ethaddr {
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/dts/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index 385b069226..51f62c3ae1 100644
--- a/dts/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/dts/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -41,7 +41,7 @@ required:
   - nvmem-cells
 
 patternProperties:
-  "opp-[0-9]+":
+  "^opp-[0-9]+$":
     type: object
 
     properties:
@@ -49,7 +49,7 @@ patternProperties:
       clock-latency-ns: true
 
     patternProperties:
-      "opp-microvolt-.*": true
+      "^opp-microvolt-speed[0-9]$": true
 
     required:
       - opp-hz
diff --git a/dts/Bindings/opp/opp-v1.yaml b/dts/Bindings/opp/opp-v1.yaml
index d585d536a3..07e26c2678 100644
--- a/dts/Bindings/opp/opp-v1.yaml
+++ b/dts/Bindings/opp/opp-v1.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v1.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic OPP (Operating Performance Points) v1 Bindings
+title: Generic OPP (Operating Performance Points) v1
 
 maintainers:
   - Viresh Kumar <viresh.kumar@linaro.org>
diff --git a/dts/Bindings/opp/opp-v2-base.yaml b/dts/Bindings/opp/opp-v2-base.yaml
index 66d0ec763f..47e6f36b76 100644
--- a/dts/Bindings/opp/opp-v2-base.yaml
+++ b/dts/Bindings/opp/opp-v2-base.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic OPP (Operating Performance Points) Common Binding
+title: Generic OPP (Operating Performance Points) Common Properties
 
 maintainers:
   - Viresh Kumar <viresh.kumar@linaro.org>
@@ -108,7 +108,7 @@ patternProperties:
           The power for the OPP in micro-Watts.
 
           Entries for multiple regulators shall be provided in the same field
-          separated by angular brackets <>. If current values aren't required
+          separated by angular brackets <>. If power values aren't required
           for a regulator, then it shall be filled with 0. If power values
           aren't required for any of the regulators, then this field is not
           required. The OPP binding doesn't provide any provisions to relate the
@@ -230,9 +230,9 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
-      '^opp-microwatt':
+      '^opp-microwatt-':
         description:
-          Named opp-microwatt property. Similar to opp-microamp property,
+          Named opp-microwatt property. Similar to opp-microamp-<name> property,
           but for microwatt instead.
         $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
diff --git a/dts/Bindings/opp/opp-v2-kryo-cpu.yaml b/dts/Bindings/opp/opp-v2-kryo-cpu.yaml
index a202b6c656..60cf3cbde4 100644
--- a/dts/Bindings/opp/opp-v2-kryo-cpu.yaml
+++ b/dts/Bindings/opp/opp-v2-kryo-cpu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. NVMEM OPP bindings
+title: Qualcomm Technologies, Inc. NVMEM OPP
 
 maintainers:
   - Ilia Lin <ilia.lin@kernel.org>
diff --git a/dts/Bindings/opp/opp-v2-qcom-level.yaml b/dts/Bindings/opp/opp-v2-qcom-level.yaml
index df8442fb11..b9ce2e099c 100644
--- a/dts/Bindings/opp/opp-v2-qcom-level.yaml
+++ b/dts/Bindings/opp/opp-v2-qcom-level.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm OPP bindings to describe OPP nodes.
+title: Qualcomm OPP
 
 maintainers:
   - Niklas Cassel <nks@flawful.org>
diff --git a/dts/Bindings/opp/opp-v2.yaml b/dts/Bindings/opp/opp-v2.yaml
index eaf8fba2c6..6972d76233 100644
--- a/dts/Bindings/opp/opp-v2.yaml
+++ b/dts/Bindings/opp/opp-v2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic OPP (Operating Performance Points) Bindings
+title: Generic OPP (Operating Performance Points)
 
 maintainers:
   - Viresh Kumar <viresh.kumar@linaro.org>
@@ -155,7 +155,7 @@ examples:
             opp-hz = /bits/ 64 <1200000000>;
             opp-microvolt = <1025000>;
             opp-microamp = <90000>;
-            lock-latency-ns = <290000>;
+            clock-latency-ns = <290000>;
             turbo-mode;
         };
     };
diff --git a/dts/Bindings/pci/baikal,bt1-pcie.yaml b/dts/Bindings/pci/baikal,bt1-pcie.yaml
new file mode 100644
index 0000000000..8eaa07ae97
--- /dev/null
+++ b/dts/Bindings/pci/baikal,bt1-pcie.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PCIe Root Port Controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  Embedded into Baikal-T1 SoC Root Complex controller with a single port
+  activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured
+  to have just a single Root Port function and is capable of establishing the
+  link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset
+  control module, so the proper interface initialization is supposed to be
+  performed by software. There four in- and four outbound iATU regions
+  which can be used to emit all required TLP types on the PCIe bus.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-pcie
+
+  reg:
+    description:
+      DBI, DBI2 and at least 4KB outbound iATU-capable region for the
+      peripheral devices CFG-space access.
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: config
+
+  interrupts:
+    description:
+      MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
+      request and eight Read/Write eDMA IRQ lines are available.
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: dma0
+      - const: dma1
+      - const: dma2
+      - const: dma3
+      - const: dma4
+      - const: dma5
+      - const: dma6
+      - const: dma7
+      - const: msi
+      - const: aer
+      - const: pme
+      - const: hp
+      - const: bw_mg
+      - const: l_eq
+
+  clocks:
+    description:
+      DBI (attached to the APB bus), AXI-bus master and slave interfaces
+      are fed up by the dedicated application clocks. A common reference
+      clock signal is supposed to be attached to the corresponding Ref-pad
+      of the SoC. It will be redistributed amongst the controller core
+      sub-modules (pipe, core, aux, etc).
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+      - const: ref
+
+  resets:
+    description:
+      A comprehensive controller reset logic is supposed to be implemented
+      by software, so almost all the possible application and core reset
+      signals are exposed via the system CCU module.
+    maxItems: 9
+
+  reset-names:
+    items:
+      - const: mstr
+      - const: slv
+      - const: pwr
+      - const: hot
+      - const: phy
+      - const: core
+      - const: pipe
+      - const: sticky
+      - const: non-sticky
+
+  baikal,bt1-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the Baikal-T1 System Controller DT node. It's required to
+      access some additional PM, Reset-related and LTSSM signals.
+
+  num-lanes:
+    maximum: 4
+
+  max-link-speed:
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    pcie@1f052000 {
+      compatible = "baikal,bt1-pcie";
+      device_type = "pci";
+      reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>;
+      reg-names = "dbi", "dbi2", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>,
+               <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "dma0", "dma1", "dma2", "dma3",
+                        "dma4", "dma5", "dma6", "dma7",
+                        "msi", "aer", "pme", "hp", "bw_mg",
+                        "l_eq";
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>;
+      clock-names = "dbi", "mstr", "slv", "ref";
+
+      resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>,
+               <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>,
+               <&ccu_sys 9>;
+      reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
+                    "sticky", "non-sticky";
+
+      reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>;
+
+      num-lanes = <4>;
+      max-link-speed = <3>;
+    };
+...
diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.yaml b/dts/Bindings/pci/fsl,imx6q-pcie.yaml
index 376e739bca..bad980902f 100644
--- a/dts/Bindings/pci/fsl,imx6q-pcie.yaml
+++ b/dts/Bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
     enum:
@@ -60,8 +57,8 @@ properties:
     items:
       - const: pcie
       - const: pcie_bus
-      - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+      - enum: [ pcie_phy, pcie_aux ]
+      - enum: [ pcie_inbound_axi, pcie_aux ]
 
   num-lanes:
     const: 1
@@ -72,6 +69,7 @@ properties:
       required properties for imx7d-pcie and imx8mq-pcie.
 
   power-domains:
+    minItems: 1
     items:
       - description: The phandle pointing to the DISPLAY domain for
           imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
@@ -80,20 +78,20 @@ properties:
           for imx6sx-pcie.
 
   power-domain-names:
+    minItems: 1
     items:
       - const: pcie
       - const: pcie_phy
 
   resets:
+    minItems: 2
     maxItems: 3
     description: Phandles to PCIe-related reset lines exposed by SRC
       IP block. Additional required by imx7d-pcie and imx8mq-pcie.
 
   reset-names:
-    items:
-      - const: pciephy
-      - const: apps
-      - const: turnoff
+    minItems: 2
+    maxItems: 3
 
   fsl,tx-deemph-gen1:
     description: Gen1 De-emphasis value (optional required).
@@ -175,6 +173,136 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_inbound_axi
+        power-domains:
+          minItems: 2
+        power-domain-names:
+          minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mm-pcie
+              - fsl,imx8mp-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+    then:
+      properties:
+        power-domains: false
+        power-domain-names: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx6q-pcie
+                - fsl,imx6qp-pcie
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6sx-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+              - fsl,imx8mq-pcie
+    then:
+      properties:
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: pciephy
+            - const: apps
+            - const: turnoff
+    else:
+      properties:
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: apps
+            - const: turnoff
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/Bindings/pci/mediatek,mt7621-pcie.yaml b/dts/Bindings/pci/mediatek,mt7621-pcie.yaml
index d60f43fd9c..e63e6458ce 100644
--- a/dts/Bindings/pci/mediatek,mt7621-pcie.yaml
+++ b/dts/Bindings/pci/mediatek,mt7621-pcie.yaml
@@ -31,7 +31,7 @@ properties:
     maxItems: 2
 
 patternProperties:
-  'pcie@[0-2],0':
+  '^pcie@[0-2],0$':
     type: object
     $ref: /schemas/pci/pci-bus.yaml#
 
diff --git a/dts/Bindings/pci/mediatek-pcie-gen3.yaml b/dts/Bindings/pci/mediatek-pcie-gen3.yaml
index c00be39af6..7e8c7a2a5f 100644
--- a/dts/Bindings/pci/mediatek-pcie-gen3.yaml
+++ b/dts/Bindings/pci/mediatek-pcie-gen3.yaml
@@ -43,14 +43,12 @@ description: |+
   each set has its own address for MSI message, and supports 32 MSI vectors
   to generate interrupt.
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
     oneOf:
       - items:
           - enum:
+              - mediatek,mt7986-pcie
               - mediatek,mt8188-pcie
               - mediatek,mt8195-pcie
           - const: mediatek,mt8192-pcie
@@ -70,29 +68,29 @@ properties:
     minItems: 1
     maxItems: 8
 
+  iommu-map:
+    maxItems: 1
+
+  iommu-map-mask:
+    const: 0
+
   resets:
     minItems: 1
     maxItems: 2
 
   reset-names:
     minItems: 1
+    maxItems: 2
     items:
-      - const: phy
-      - const: mac
+      enum: [ phy, mac ]
 
   clocks:
+    minItems: 4
     maxItems: 6
 
   clock-names:
-    items:
-      - const: pl_250m
-      - const: tl_26m
-      - const: tl_96m
-      - const: tl_32k
-      - const: peri_26m
-      - enum:
-          - top_133m        # for MT8192
-          - peri_mem        # for MT8188/MT8195
+    minItems: 4
+    maxItems: 6
 
   assigned-clocks:
     maxItems: 1
@@ -107,6 +105,9 @@ properties:
     items:
       - const: pcie-phy
 
+  power-domains:
+    maxItems: 1
+
   '#interrupt-cells':
     const: 1
 
@@ -138,6 +139,54 @@ required:
   - '#interrupt-cells'
   - interrupt-controller
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt8192-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: top_133m
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: peri_mem
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: peri_26m
+            - const: top_133m
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/Bindings/pci/nvidia,tegra194-pcie.yaml b/dts/Bindings/pci/nvidia,tegra194-pcie.yaml
index 75da3e8eec..fe81d52c72 100644
--- a/dts/Bindings/pci/nvidia,tegra194-pcie.yaml
+++ b/dts/Bindings/pci/nvidia,tegra194-pcie.yaml
@@ -27,6 +27,7 @@ properties:
       - nvidia,tegra234-pcie
 
   reg:
+    minItems: 4
     items:
       - description: controller's application logic registers
       - description: configuration registers
@@ -35,13 +36,16 @@ properties:
           available for software access.
       - description: aperture where the Root Port's own configuration
           registers are available.
+      - description: aperture to access the configuration space through ECAM.
 
   reg-names:
+    minItems: 4
     items:
       - const: appl
       - const: config
       - const: atu_dma
       - const: dbi
+      - const: ecam
 
   interrupts:
     items:
@@ -202,6 +206,31 @@ properties:
 
 allOf:
   - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-pcie
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
 
 unevaluatedProperties: false
 
@@ -305,8 +334,9 @@ examples:
             reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
                   <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
                   <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-                  <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-            reg-names = "appl", "config", "atu_dma", "dbi";
+                  <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+            reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
             #address-cells = <3>;
             #size-cells = <2>;
diff --git a/dts/Bindings/pci/pci-ep.yaml b/dts/Bindings/pci/pci-ep.yaml
index ccec51ab52..d1eef48252 100644
--- a/dts/Bindings/pci/pci-ep.yaml
+++ b/dts/Bindings/pci/pci-ep.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/pci-ep.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: PCI Endpoint Controller Schema
+title: PCI Endpoint Controller
 
 description: |
   Common properties for PCI Endpoint Controller Nodes.
diff --git a/dts/Bindings/pci/qcom,pcie-ep.yaml b/dts/Bindings/pci/qcom,pcie-ep.yaml
index 977c976ea7..8d7eb51edc 100644
--- a/dts/Bindings/pci/qcom,pcie-ep.yaml
+++ b/dts/Bindings/pci/qcom,pcie-ep.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm PCIe Endpoint Controller binding
+title: Qualcomm PCIe Endpoint Controller
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/dts/Bindings/pci/qcom,pcie.yaml b/dts/Bindings/pci/qcom,pcie.yaml
index 54f07852d2..a5859bb3dc 100644
--- a/dts/Bindings/pci/qcom,pcie.yaml
+++ b/dts/Bindings/pci/qcom,pcie.yaml
@@ -62,6 +62,16 @@ properties:
     minItems: 3
     maxItems: 13
 
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
   resets:
     minItems: 1
     maxItems: 12
@@ -632,6 +642,18 @@ allOf:
             - const: pci # PCIe core reset
 
   - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sc8280xp
+    then:
+      required:
+        - interconnects
+        - interconnect-names
+
+  - if:
       not:
         properties:
           compatible:
diff --git a/dts/Bindings/pci/renesas,pci-rcar-gen2.yaml b/dts/Bindings/pci/renesas,pci-rcar-gen2.yaml
index 0f18cceba3..5a0d64d3ae 100644
--- a/dts/Bindings/pci/renesas,pci-rcar-gen2.yaml
+++ b/dts/Bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -65,7 +65,7 @@ properties:
     maxItems: 1
 
 patternProperties:
-  'usb@[0-1],0':
+  '^usb@[0-1],0$':
     type: object
 
     description:
diff --git a/dts/Bindings/pci/rockchip-dw-pcie.yaml b/dts/Bindings/pci/rockchip-dw-pcie.yaml
index bc0a9d1db7..2be72ae116 100644
--- a/dts/Bindings/pci/rockchip-dw-pcie.yaml
+++ b/dts/Bindings/pci/rockchip-dw-pcie.yaml
@@ -14,10 +14,10 @@ maintainers:
 description: |+
   RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
   PCIe IP and thus inherits all the common properties defined in
-  designware-pcie.txt.
+  snps,dw-pcie.yaml.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/pci/snps,dw-pcie-common.yaml b/dts/Bindings/pci/snps,dw-pcie-common.yaml
new file mode 100644
index 0000000000..d87e134968
--- /dev/null
+++ b/dts/Bindings/pci/snps,dw-pcie-common.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC PCIe RP/EP controller
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description:
+  Generic Synopsys DesignWare PCIe Root Port and Endpoint controller
+  properties.
+
+select: false
+
+properties:
+  reg:
+    description:
+      DWC PCIe CSR space is normally accessed over the dedicated Data Bus
+      Interface - DBI. In accordance with the reference manual the register
+      configuration space belongs to the Configuration-Dependent Module (CDM)
+      and is split up into several sub-parts Standard PCIe configuration
+      space, Port Logic Registers (PL), Shadow Config-space Registers,
+      iATU/eDMA registers. The particular sub-space is selected by the
+      CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such
+      configuration provides a flexible interface for the system engineers to
+      either map the particular space at a desired MMIO address or just leave
+      them in a contiguous memory space if pure Native or AXI Bridge DBI access
+      is selected. Note the PCIe CFG-space, PL and Shadow registers are
+      specific for each activated function, while the rest of the sub-spaces
+      are common for all of them (if there are more than one).
+    minItems: 2
+    maxItems: 6
+
+  reg-names:
+    minItems: 2
+    maxItems: 6
+
+  interrupts:
+    description:
+      There are two main sub-blocks which are normally capable of
+      generating interrupts. It's System Information Interface and MSI
+      interface. While the former one has some common for the Host and
+      Endpoint controllers IRQ-signals, the later interface is obviously
+      Root Complex specific since it's responsible for the incoming MSI
+      messages signalling. The System Information IRQ signals are mainly
+      responsible for reporting the generic PCIe hierarchy and Root
+      Complex events like VPD IO request, general AER, PME, Hot-plug, link
+      bandwidth change, link equalization request, INTx asserted/deasserted
+      Message detection, embedded DMA Tx/Rx/Error.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+
+  clocks:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the clocks required
+      to get the controller working correctly. In general all of them can
+      be divided into two groups':' application and core clocks. Note the
+      platforms may have some of the clock sources unspecified in case if the
+      corresponding domains are fed up from a common clock source.
+    minItems: 1
+    maxItems: 7
+
+  clock-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      oneOf:
+        - description:
+            Data Bus Interface (DBI) clock. Clock signal for the AXI-bus
+            interface of the Configuration-Dependent Module, which is
+            basically the set of the controller CSRs.
+          const: dbi
+        - description:
+            Application AXI-bus Master interface clock. Basically this is
+            a clock for the controller DMA interface (PCI-to-CPU).
+          const: mstr
+        - description:
+            Application AXI-bus Slave interface clock. This is a clock for
+            the CPU-to-PCI memory IO interface.
+          const: slv
+        - description:
+            Controller Core-PCS PIPE interface clock. It's normally
+            supplied by an external PCS-PHY.
+          const: pipe
+        - description:
+            Controller Primary clock. It's assumed that all controller input
+            signals (except resets) are synchronous to this clock.
+          const: core
+        - description:
+            Auxiliary clock for the controller PMC domain. The controller
+            partitioning implies having some parts to operate with this
+            clock in some power management states.
+          const: aux
+        - description:
+            Generic reference clock. In case if there are several
+            interfaces fed up with a common clock source it's advisable to
+            define it with this name (for instance pipe, core and aux can
+            be connected to a single source of the periodic signal).
+          const: ref
+        - description:
+            Clock for the PHY registers interface. Originally this is
+            a PHY-viewport-based interface, but some platform may have
+            specifically designed one.
+          const: phy_reg
+        - description:
+            Vendor-specific clock names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'dbi' clock for details
+              enum: [ pcie, pcie_apb_sys, aclk_dbi ]
+            - description: See native 'mstr/slv' clock for details
+              enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
+            - description: See native 'pipe' clock for details
+              enum: [ pcie_phy, pcie_phy_ref, link ]
+            - description: See native 'aux' clock for details
+              enum: [ pcie_aux ]
+            - description: See native 'ref' clock for details.
+              enum: [ gio ]
+            - description: See nativs 'phy_reg' clock for details
+              enum: [ pcie_apb_phy, pclk ]
+
+  resets:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the reset
+      signals required to be de-asserted to properly activate the controller
+      sub-parts. All of these signals can be divided into two sub-groups':'
+      application and core resets with respect to the main sub-domains they
+      are supposed to reset. Note the platforms may have some of these signals
+      unspecified in case if they are automatically handled or aggregated into
+      a comprehensive control module.
+    minItems: 1
+    maxItems: 10
+
+  reset-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      oneOf:
+        - description: Data Bus Interface (DBI) domain reset
+          const: dbi
+        - description: AXI-bus Master interface reset
+          const: mstr
+        - description: AXI-bus Slave interface reset
+          const: slv
+        - description: Application-dependent interface reset
+          const: app
+        - description: Controller Non-sticky CSR flags reset
+          const: non-sticky
+        - description: Controller sticky CSR flags reset
+          const: sticky
+        - description: PIPE-interface (Core-PCS) logic reset
+          const: pipe
+        - description:
+            Controller primary reset (resets everything except PMC module)
+          const: core
+        - description: PCS/PHY block reset
+          const: phy
+        - description: PMC hot reset signal
+          const: hot
+        - description: Cold reset signal
+          const: pwr
+        - description:
+            Vendor-specific reset names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'app' reset for details
+              enum: [ apps, gio, apb ]
+            - description: See native 'phy' reset for details
+              enum: [ pciephy, link ]
+            - description: See native 'pwr' reset for details
+              enum: [ turnoff ]
+
+  phys:
+    description:
+      There can be up to the number of possible lanes PHYs specified placed in
+      the phandle array in the line-based order. Obviously each the specified
+      PHYs are supposed to be able to work in the PCIe mode with a speed
+      implied by the DWC PCIe controller they are attached to.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    minItems: 1
+    maxItems: 16
+    oneOf:
+      - description: Generic PHY names
+        items:
+          pattern: '^pcie[0-9]+$'
+      - description:
+          Vendor-specific PHY names. Consider using the generic
+          names above for new bindings.
+        items:
+          oneOf:
+            - pattern: '^pcie(-?phy[0-9]*)?$'
+            - pattern: '^p2u-[0-7]$'
+
+  reset-gpio:
+    deprecated: true
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  max-link-speed:
+    maximum: 5
+
+  num-lanes:
+    description:
+      Number of PCIe link lanes to use. Can be omitted if the already brought
+      up link is supposed to be preserved.
+    maximum: 16
+
+  num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound address translation windows. This parameter can be
+      auto-detected based on the iATU memory writability. So there is no
+      point in having a dedicated DT-property for it.
+    maximum: 256
+
+  num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of inbound address translation windows. In the same way as
+      for the outbound AT windows, this parameter can be auto-detected based
+      on the iATU memory writability. There is no point having a dedicated
+      DT-property for it either.
+    maximum: 256
+
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound view ports configured in hardware. It's the same as
+      the number of outbound AT windows.
+    maximum: 256
+
+  snps,enable-cdm-check:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable automatic checking of CDM (Configuration Dependent Module)
+      registers for data corruption. CDM registers include standard PCIe
+      configuration space registers, Port Logic registers, DMA and iATU
+      registers. This feature has been available since DWC PCIe v4.80a.
+
+  dma-coherent: true
+
+additionalProperties: true
+
+...
diff --git a/dts/Bindings/pci/snps,dw-pcie-ep.yaml b/dts/Bindings/pci/snps,dw-pcie-ep.yaml
index b78535040f..8fc2151691 100644
--- a/dts/Bindings/pci/snps,dw-pcie-ep.yaml
+++ b/dts/Bindings/pci/snps,dw-pcie-ep.yaml
@@ -13,76 +13,182 @@ maintainers:
 description: |
   Synopsys DesignWare PCIe host controller endpoint
 
+# Please create a separate DT-schema for your DWC PCIe Endpoint controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie-ep
+  required:
+    - compatible
+
 allOf:
   - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 properties:
-  compatible:
-    anyOf:
-      - {}
-      - const: snps,dw-pcie-ep
-
   reg:
-    description: |
-      It should contain Data Bus Interface (dbi) and config registers for all
-      versions.
-      For designware core version >= 4.80, it may contain ATU address space.
+    description:
+      DBI, DBI2 reg-spaces and outbound memory window are required for the
+      normal controller functioning. iATU memory IO region is also required
+      if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
-    maxItems: 4
+    maxItems: 5
 
   reg-names:
     minItems: 2
-    maxItems: 4
+    maxItems: 5
     items:
-      enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
-
-  reset-gpio:
-    description: GPIO pin number of PERST# signal
-    maxItems: 1
-    deprecated: true
-
-  reset-gpios:
-    description: GPIO controlled connection to PERST# signal
-    maxItems: 1
-
-  snps,enable-cdm-check:
-    type: boolean
-    description: |
-      This is a boolean property and if present enables
-      automatic checking of CDM (Configuration Dependent Module) registers
-      for data corruption. CDM registers include standard PCIe configuration
-      space registers, Port Logic registers, DMA and iATU (internal Address
-      Translation Unit) registers.
-
-  num-ib-windows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    maximum: 256
-    description: number of inbound address translation windows
-    deprecated: true
-
-  num-ob-windows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    maximum: 256
-    description: number of outbound address translation windows
-    deprecated: true
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to
+            generate various application-specific traffic on the PCIe bus
+            hierarchy. It's usage scenario depends on the endpoint
+            functionality, for instance it can be used to create MSI(X)
+            messages.
+          const: addr_space
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ link, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: addr_space
+
+  interrupts:
+    description:
+      There is no mandatory IRQ signals for the normal controller functioning,
+      but in addition to the native set the platforms may have a link- or
+      PM-related IRQs specified.
+    minItems: 1
+    maxItems: 20
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 20
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
+
+  max-functions:
+    maximum: 32
 
 required:
+  - compatible
   - reg
   - reg-names
-  - compatible
 
 additionalProperties: true
 
 examples:
   - |
-    bus {
-      #address-cells = <1>;
-      #size-cells = <1>;
-      pcie-ep@dfd00000 {
-        compatible = "snps,dw-pcie-ep";
-        reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
-              <0xdfc01000 0x0001000>, /* IP registers 2 */
-              <0xd0000000 0x2000000>; /* Configuration space */
-        reg-names = "dbi", "dbi2", "addr_space";
-      };
+    pcie-ep@dfd00000 {
+      compatible = "snps,dw-pcie-ep";
+      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+            <0xdfc01000 0x0001000>, /* IP registers 2 */
+            <0xd0000000 0x2000000>; /* Configuration space */
+      reg-names = "dbi", "dbi2", "addr_space";
+
+      interrupts = <23>, <24>;
+      interrupt-names = "dma0", "dma1";
+
+      clocks = <&sys_clk 12>, <&sys_clk 24>;
+      clock-names = "dbi", "ref";
+
+      resets = <&sys_rst 12>, <&sys_rst 24>;
+      reset-names = "dbi", "phy";
+
+      phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
+      phy-names = "pcie0", "pcie1", "pcie2", "pcie3";
+
+      max-link-speed = <3>;
+      max-functions = /bits/ 8 <4>;
     };
diff --git a/dts/Bindings/pci/snps,dw-pcie.yaml b/dts/Bindings/pci/snps,dw-pcie.yaml
index 7287d395e1..1a83f0f65f 100644
--- a/dts/Bindings/pci/snps,dw-pcie.yaml
+++ b/dts/Bindings/pci/snps,dw-pcie.yaml
@@ -13,20 +13,25 @@ maintainers:
 description: |
   Synopsys DesignWare PCIe host controller
 
+# Please create a separate DT-schema for your DWC PCIe Root Port controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie
+  required:
+    - compatible
+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 properties:
-  compatible:
-    anyOf:
-      - {}
-      - const: snps,dw-pcie
-
   reg:
-    description: |
-      It should contain Data Bus Interface (dbi) and config registers for all
-      versions.
-      For designware core version >= 4.80, it may contain ATU address space.
+    description:
+      At least DBI reg-space and peripheral devices CFG-space outbound window
+      are required for the normal controller work. iATU memory IO region is
+      also required if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
     maxItems: 5
 
@@ -34,71 +39,194 @@ properties:
     minItems: 2
     maxItems: 5
     items:
-      enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
-              parf, cfg, link, ulreg, smu, mpu, apb, phy ]
-
-  num-lanes:
-    description: |
-      number of lanes to use (this property should be specified unless
-      the link is brought already up in firmware)
-    maximum: 16
-
-  reset-gpio:
-    description: GPIO pin number of PERST# signal
-    maxItems: 1
-    deprecated: true
-
-  reset-gpios:
-    description: GPIO controlled connection to PERST# signal
-    maxItems: 1
-
-  interrupts: true
-
-  interrupt-names: true
-
-  clocks: true
-
-  snps,enable-cdm-check:
-    type: boolean
-    description: |
-      This is a boolean property and if present enables
-      automatic checking of CDM (Configuration Dependent Module) registers
-      for data corruption. CDM registers include standard PCIe configuration
-      space registers, Port Logic registers, DMA and iATU (internal Address
-      Translation Unit) registers.
-
-  num-viewport:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    maximum: 256
-    description: |
-      number of view ports configured in hardware. If a platform
-      does not specify it, the driver autodetects it.
-    deprecated: true
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to access
+            the peripheral PCIe devices configuration space.
+          const: config
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ apb, mgmt, link, ulreg, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+            - description: Syscon-related CSR regions.
+              enum: [ smu, mpu ]
+            - description: Tegra234 aperture
+              enum: [ ecam ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: config
+
+  interrupts:
+    description:
+      DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
+      signal is supposed to be specified for the host controller.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+            no more MSI interrupt pending. The interrupt is relevant to the
+            iMSI-RX - Integrated MSI Receiver (AXI bridge).
+          const: msi
+        - description:
+            Legacy A/B/C/D interrupt signal. Basically it's triggered by
+            receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+            from the downstream device.
+          pattern: "^int(a|b|c|d)$"
+        - description:
+            Error condition detected and a flag is set in the Root Error Status
+            register of the AER capability. It's asserted when the RC
+            internally generated an error or an error message is received by
+            the RC.
+          const: aer
+        - description:
+            PME message is received by the port. That means having the PME
+            status bit set in the Root Status register (the event is
+            supposed to be unmasked in the Root Control register).
+          const: pme
+        - description:
+            Hot-plug event is detected. That is a bit has been set in the
+            Slot Status register and the corresponding event is enabled in
+            the Slot Control register.
+          const: hp
+        - description:
+            Link Autonomous Bandwidth Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_au
+        - description:
+            Bandwidth Management Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_mg
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
+    allOf:
+      - contains:
+          const: msi
 
 additionalProperties: true
 
 required:
+  - compatible
   - reg
   - reg-names
-  - compatible
 
 examples:
   - |
-    bus {
-      #address-cells = <1>;
-      #size-cells = <1>;
-      pcie@dfc00000 {
-        device_type = "pci";
-        compatible = "snps,dw-pcie";
-        reg = <0xdfc00000 0x0001000>, /* IP registers */
-              <0xd0000000 0x0002000>; /* Configuration space */
-        reg-names = "dbi", "config";
-        #address-cells = <3>;
-        #size-cells = <2>;
-        ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
-                 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
-        interrupts = <25>, <24>;
-        #interrupt-cells = <1>;
-        num-lanes = <1>;
-      };
+    pcie@dfc00000 {
+      compatible = "snps,dw-pcie";
+      device_type = "pci";
+      reg = <0xdfc00000 0x0001000>, /* IP registers */
+            <0xd0000000 0x0002000>; /* Configuration space */
+      reg-names = "dbi", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+               <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <25>, <24>;
+      interrupt-names = "msi", "hp";
+      #interrupt-cells = <1>;
+
+      reset-gpios = <&port0 0 1>;
+
+      phys = <&pcie_phy>;
+      phy-names = "pcie";
+
+      num-lanes = <1>;
+      max-link-speed = <3>;
     };
diff --git a/dts/Bindings/pci/ti,j721e-pci-ep.yaml b/dts/Bindings/pci/ti,j721e-pci-ep.yaml
index aed437dac3..10e6eabdff 100644
--- a/dts/Bindings/pci/ti,j721e-pci-ep.yaml
+++ b/dts/Bindings/pci/ti,j721e-pci-ep.yaml
@@ -58,6 +58,13 @@ properties:
   dma-coherent:
     description: Indicates that the PCIe IP block can ensure the coherency
 
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pci/ti,j721e-pci-host.yaml b/dts/Bindings/pci/ti,j721e-pci-host.yaml
index 2115d5a3f0..b0513b197d 100644
--- a/dts/Bindings/pci/ti,j721e-pci-host.yaml
+++ b/dts/Bindings/pci/ti,j721e-pci-host.yaml
@@ -73,9 +73,31 @@ properties:
           - const: 0xb00f
       - items:
           - const: 0xb010
+      - items:
+          - const: 0xb013
 
   msi-map: true
 
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pci/toshiba,visconti-pcie.yaml b/dts/Bindings/pci/toshiba,visconti-pcie.yaml
index 48ed227fc5..53da2edd7c 100644
--- a/dts/Bindings/pci/toshiba,visconti-pcie.yaml
+++ b/dts/Bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
diff --git a/dts/Bindings/pci/xilinx-nwl-pcie.txt b/dts/Bindings/pci/xilinx-nwl-pcie.txt
deleted file mode 100644
index f56f8c58c5..0000000000
--- a/dts/Bindings/pci/xilinx-nwl-pcie.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Xilinx NWL PCIe Root Port Bridge DT description
-
-Required properties:
-- compatible: Should contain "xlnx,nwl-pcie-2.11"
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- reg: Should contain Bridge, PCIe Controller registers location,
-	configuration space, and length
-- reg-names: Must include the following entries:
-	"breg": bridge registers
-	"pcireg": PCIe controller registers
-	"cfg": configuration space region
-- device_type: must be "pci"
-- interrupts: Should contain NWL PCIe interrupt
-- interrupt-names: Must include the following entries:
-	"msi1, msi0": interrupt asserted when an MSI is received
-	"intx": interrupt asserted when a legacy interrupt is received
-	"misc": interrupt asserted when miscellaneous interrupt is received
-- interrupt-map-mask and interrupt-map: standard PCI properties to define the
-	mapping of the PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
-	supported by hardware)
-	Please refer to the standard PCI bus binding document for a more
-	detailed explanation
-- msi-controller: indicates that this is MSI controller node
-- msi-parent:  MSI parent of the root complex itself
-- legacy-interrupt-controller: Interrupt controller device node for Legacy
-	interrupts
-	- interrupt-controller: identifies the node as an interrupt controller
-	- #interrupt-cells: should be set to 1
-	- #address-cells: specifies the number of cells needed to encode an
-		address. The value must be 0.
-
-Optional properties:
-- dma-coherent: present if DMA operations are coherent
-- clocks: Input clock specifier. Refer to common clock bindings
-
-Example:
-++++++++
-
-nwl_pcie: pcie@fd0e0000 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-	compatible = "xlnx,nwl-pcie-2.11";
-	#interrupt-cells = <1>;
-	msi-controller;
-	device_type = "pci";
-	interrupt-parent = <&gic>;
-	interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
-	interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
-	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-	interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
-			<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
-			<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
-			<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
-
-	msi-parent = <&nwl_pcie>;
-	reg = <0x0 0xfd0e0000 0x0 0x1000>,
-	      <0x0 0xfd480000 0x0 0x1000>,
-	      <0x80 0x00000000 0x0 0x1000000>;
-	reg-names = "breg", "pcireg", "cfg";
-	ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000  /* non-prefetchable memory */
-		  0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
-
-	pcie_intc: legacy-interrupt-controller {
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-
-};
diff --git a/dts/Bindings/pci/xilinx-pcie.txt b/dts/Bindings/pci/xilinx-pcie.txt
deleted file mode 100644
index fd57a81180..0000000000
--- a/dts/Bindings/pci/xilinx-pcie.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Xilinx AXI PCIe Root Port Bridge DT description
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
-- reg: Should contain AXI PCIe registers location and length
-- device_type: must be "pci"
-- interrupts: Should contain AXI PCIe interrupt
-- interrupt-map-mask,
-  interrupt-map: standard PCI properties to define the mapping of the
-	PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
-	supported by hardware)
-	Please refer to the standard PCI bus binding document for a more
-	detailed explanation
-
-Optional properties for Zynq/Microblaze:
-- bus-range: PCI bus numbers covered
-
-Interrupt controller child node
-+++++++++++++++++++++++++++++++
-Required properties:
-- interrupt-controller: identifies the node as an interrupt controller
-- #address-cells: specifies the number of cells needed to encode an
-	address. The value must be 0.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-
-NOTE:
-The core provides a single interrupt for both INTx/MSI messages. So,
-created a interrupt controller node to support 'interrupt-map' DT
-functionality.  The driver will create an IRQ domain for this map, decode
-the four INTx interrupts in ISR and route them to this domain.
-
-
-Example:
-++++++++
-Zynq:
-	pci_express: axi-pcie@50000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x1000000 >;
-		device_type = "pci";
-		interrupts = < 0 52 4 >;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
-		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
-
-		pcie_intc: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-
-Microblaze:
-	pci_express: axi-pcie@10000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = <0x10000000 0x4000000>;
-		device_type = "pci";
-		interrupt-parent = <&microblaze_0_intc>;
-		interrupts = <1 2>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
-		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
-
-		pcie_intc: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-
-	};
diff --git a/dts/Bindings/pci/xlnx,axi-pcie-host.yaml b/dts/Bindings/pci/xlnx,axi-pcie-host.yaml
new file mode 100644
index 0000000000..69b7decabd
--- /dev/null
+++ b/dts/Bindings/pci/xlnx,axi-pcie-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,axi-pcie-host-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    items:
+      - description: |
+          ranges for the PCI memory regions (I/O space region is not
+          supported by hardware)
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - interrupts
+  - interrupt-map
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pcie@50000000 {
+        compatible = "xlnx,axi-pcie-host-1.00.a";
+        reg = <0x50000000 0x1000000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &pcie_intc 1>,
+                        <0 0 0 2 &pcie_intc 2>,
+                        <0 0 0 3 &pcie_intc 3>,
+                        <0 0 0 4 &pcie_intc 4>;
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>;
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #address-cells = <0>;
+            #interrupt-cells = <1>;
+        };
+    };
diff --git a/dts/Bindings/pci/xlnx,nwl-pcie.yaml b/dts/Bindings/pci/xlnx,nwl-pcie.yaml
new file mode 100644
index 0000000000..897602559b
--- /dev/null
+++ b/dts/Bindings/pci/xlnx,nwl-pcie.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx NWL PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: xlnx,nwl-pcie-2.11
+
+  reg:
+    items:
+      - description: PCIe bridge registers location.
+      - description: PCIe Controller registers location.
+      - description: PCIe Configuration space region.
+
+  reg-names:
+    items:
+      - const: breg
+      - const: pcireg
+      - const: cfg
+
+  interrupts:
+    items:
+      - description: interrupt asserted when miscellaneous interrupt is received
+      - description: unused interrupt(dummy)
+      - description: interrupt asserted when a legacy interrupt is received
+      - description: msi1 interrupt asserted when an MSI is received
+      - description: msi0 interrupt asserted when an MSI is received
+
+  interrupt-names:
+    items:
+      - const: misc
+      - const: dummy
+      - const: intx
+      - const: msi1
+      - const: msi0
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  "#interrupt-cells":
+    const: 1
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-map:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent:
+    description: optional, only needed if DMA operations are coherent.
+
+  clocks:
+    maxItems: 1
+    description: optional, input clock specifier.
+
+  legacy-interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+      "interrupt-controller": true
+
+    required:
+      - "#address-cells"
+      - "#interrupt-cells"
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-controller
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        nwl_pcie: pcie@fd0e0000 {
+            compatible = "xlnx,nwl-pcie-2.11";
+            reg = <0x0 0xfd0e0000 0x0 0x1000>,
+                  <0x0 0xfd480000 0x0 0x1000>,
+                  <0x80 0x00000000 0x0 0x1000000>;
+            reg-names = "breg", "pcireg", "cfg";
+            ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                     <0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            msi-controller;
+            device_type = "pci";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "misc", "dummy", "intx", "msi1", "msi0";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+                            <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+                            <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+                            <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+            msi-parent = <&nwl_pcie>;
+            power-domains = <&zynqmp_firmware PD_PCIE>;
+            iommus = <&smmu 0x4d0>;
+            pcie_intc: legacy-interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
diff --git a/dts/Bindings/perf/amlogic,g12-ddr-pmu.yaml b/dts/Bindings/perf/amlogic,g12-ddr-pmu.yaml
new file mode 100644
index 0000000000..50f46a6898
--- /dev/null
+++ b/dts/Bindings/perf/amlogic,g12-ddr-pmu.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/amlogic,g12-ddr-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12 DDR performance monitor
+
+maintainers:
+  - Jiucheng Xu <jiucheng.xu@amlogic.com>
+
+description: |
+  Amlogic G12 series SoC integrate DDR bandwidth monitor.
+  A timer is inside and can generate interrupt when timeout.
+  The bandwidth is counted in the timer ISR. Different platform
+  has different subset of event format attribute.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,g12a-ddr-pmu
+      - amlogic,g12b-ddr-pmu
+      - amlogic,sm1-ddr-pmu
+
+  reg:
+    items:
+      - description: DMC bandwidth register space.
+      - description: DMC PLL register space.
+
+  interrupts:
+    items:
+      - description: The IRQ of the inside timer timeout.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pmu {
+        #address-cells=<2>;
+        #size-cells=<2>;
+
+        pmu@ff638000 {
+            compatible = "amlogic,g12a-ddr-pmu";
+            reg = <0x0 0xff638000 0x0 0x100>,
+                  <0x0 0xff638c00 0x0 0x100>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
diff --git a/dts/Bindings/perf/arm,dsu-pmu.yaml b/dts/Bindings/perf/arm,dsu-pmu.yaml
index c87821be15..a740378ed5 100644
--- a/dts/Bindings/perf/arm,dsu-pmu.yaml
+++ b/dts/Bindings/perf/arm,dsu-pmu.yaml
@@ -32,11 +32,8 @@ properties:
       - description: nCLUSTERPMUIRQ interrupt
 
   cpus:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 12
-    items:
-      maxItems: 1
     description: List of phandles for the CPUs connected to this DSU instance.
 
 required:
diff --git a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index dfb6a89935..fe9702e7bd 100644
--- a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -17,13 +17,20 @@ properties:
   compatible:
     oneOf:
       - const: allwinner,sun6i-a31-mipi-dphy
+      - const: allwinner,sun50i-a100-mipi-dphy
       - items:
           - const: allwinner,sun50i-a64-mipi-dphy
           - const: allwinner,sun6i-a31-mipi-dphy
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dphy
+          - const: allwinner,sun50i-a100-mipi-dphy
 
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   clocks:
     items:
       - description: Bus Clock
@@ -53,6 +60,7 @@ required:
   - "#phy-cells"
   - compatible
   - reg
+  - interrupts
   - clocks
   - clock-names
   - resets
@@ -61,9 +69,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     dphy0: d-phy@1ca1000 {
         compatible = "allwinner,sun6i-a31-mipi-dphy";
         reg = <0x01ca1000 0x1000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu 23>, <&ccu 97>;
         clock-names = "bus", "mod";
         resets = <&ccu 4>;
diff --git a/dts/Bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
index 77539b4601..2df012d136 100644
--- a/dts/Bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+++ b/dts/Bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -36,18 +36,22 @@ properties:
       - const: pmu3
 
   clocks:
+    minItems: 4
     items:
       - description: USB OTG PHY bus clock
       - description: USB Host 0 PHY bus clock
       - description: USB Host 1 PHY bus clock
       - description: USB Host 2 PHY bus clock
+      - description: PMU clock for host port 2
 
   clock-names:
+    minItems: 4
     items:
       - const: usb0_phy
       - const: usb1_phy
       - const: usb2_phy
       - const: usb3_phy
+      - const: pmu2_clk
 
   resets:
     items:
@@ -96,6 +100,28 @@ required:
   - resets
   - reset-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-h616-usb-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+
+        clock-names:
+          maxItems: 4
+
 additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/phy/brcm,ns2-pcie-phy.yaml b/dts/Bindings/phy/brcm,ns2-pcie-phy.yaml
index 70eb48b391..527010702f 100644
--- a/dts/Bindings/phy/brcm,ns2-pcie-phy.yaml
+++ b/dts/Bindings/phy/brcm,ns2-pcie-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom NS2 PCIe PHY binding document
+title: Broadcom NS2 PCIe PHY
 
 maintainers:
   - Ray Jui <ray.jui@broadcom.com>
diff --git a/dts/Bindings/phy/calxeda-combophy.yaml b/dts/Bindings/phy/calxeda-combophy.yaml
index 41ee16e21f..d05a7c7930 100644
--- a/dts/Bindings/phy/calxeda-combophy.yaml
+++ b/dts/Bindings/phy/calxeda-combophy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda Highbank Combination PHYs binding for SATA
+title: Calxeda Highbank Combination PHYs for SATA
 
 description: |
   The Calxeda Combination PHYs connect the SoC to the internal fabric
diff --git a/dts/Bindings/phy/fsl,imx8-pcie-phy.yaml b/dts/Bindings/phy/fsl,imx8-pcie-phy.yaml
index 0af765ba27..182a219387 100644
--- a/dts/Bindings/phy/fsl,imx8-pcie-phy.yaml
+++ b/dts/Bindings/phy/fsl,imx8-pcie-phy.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - fsl,imx8mm-pcie-phy
+      - fsl,imx8mp-pcie-phy
 
   reg:
     maxItems: 1
@@ -28,11 +29,16 @@ properties:
       - const: ref
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reset-names:
-    items:
-      - const: pciephy
+    oneOf:
+      - items:          # for iMX8MM
+          - const: pciephy
+      - items:          # for IMX8MP
+          - const: pciephy
+          - const: perst
 
   fsl,refclk-pad-mode:
     description: |
@@ -60,6 +66,10 @@ properties:
     description: A boolean property indicating the CLKREQ# signal is
       not supported in the board design (optional)
 
+  power-domains:
+    description: PCIe PHY  power domain (optional).
+    maxItems: 1
+
 required:
   - "#phy-cells"
   - compatible
diff --git a/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml b/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml
index 2936f3510a..e6f9f5540c 100644
--- a/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ b/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX8MQ USB3 PHY binding
+title: Freescale i.MX8MQ USB3 PHY
 
 maintainers:
   - Li Jun <jun.li@nxp.com>
@@ -28,6 +28,9 @@ properties:
     items:
       - const: phy
 
+  power-domains:
+    maxItems: 1
+
   vbus-supply:
     description:
       A phandle to the regulator for USB VBUS.
diff --git a/dts/Bindings/phy/fsl,lynx-28g.yaml b/dts/Bindings/phy/fsl,lynx-28g.yaml
index 4d91e2f4f2..ff9f9ca0f1 100644
--- a/dts/Bindings/phy/fsl,lynx-28g.yaml
+++ b/dts/Bindings/phy/fsl,lynx-28g.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/fsl,lynx-28g.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale Lynx 28G SerDes PHY binding
+title: Freescale Lynx 28G SerDes PHY
 
 maintainers:
   - Ioana Ciornei <ioana.ciornei@nxp.com>
diff --git a/dts/Bindings/phy/ingenic,phy-usb.yaml b/dts/Bindings/phy/ingenic,phy-usb.yaml
index 5cab216486..30b42008db 100644
--- a/dts/Bindings/phy/ingenic,phy-usb.yaml
+++ b/dts/Bindings/phy/ingenic,phy-usb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/ingenic,phy-usb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs USB PHY devicetree bindings
+title: Ingenic SoCs USB PHY
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/phy/intel,keembay-phy-usb.yaml b/dts/Bindings/phy/intel,keembay-phy-usb.yaml
index 52815b6c2b..5cee4c85ff 100644
--- a/dts/Bindings/phy/intel,keembay-phy-usb.yaml
+++ b/dts/Bindings/phy/intel,keembay-phy-usb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/intel,keembay-phy-usb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay USB PHY bindings
+title: Intel Keem Bay USB PHY
 
 maintainers:
   - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
diff --git a/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml b/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml
index 34bdb5c4ca..361ffc35b1 100644
--- a/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml
+++ b/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/intel,phy-thunderbay-emmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Thunder Bay eMMC PHY bindings
+title: Intel Thunder Bay eMMC PHY
 
 maintainers:
   - Srikandan Nandhini <nandhini.srikandan@intel.com>
@@ -36,11 +36,10 @@ additionalProperties: false
 
 examples:
   - |
-     mmc_phy@80440800 {
-     #phy-cells = <0x0>;
-     compatible = "intel,thunderbay-emmc-phy";
-     status = "okay";
-     reg = <0x80440800 0x100>;
-     clocks = <&emmc>;
-     clock-names = "emmcclk";
-     };
+    mmc_phy@80440800 {
+        #phy-cells = <0x0>;
+        compatible = "intel,thunderbay-emmc-phy";
+        reg = <0x80440800 0x100>;
+        clocks = <&emmc>;
+        clock-names = "emmcclk";
+    };
diff --git a/dts/Bindings/phy/marvell,mmp3-usb-phy.yaml b/dts/Bindings/phy/marvell,mmp3-usb-phy.yaml
index c97043eaa8..be13113f7b 100644
--- a/dts/Bindings/phy/marvell,mmp3-usb-phy.yaml
+++ b/dts/Bindings/phy/marvell,mmp3-usb-phy.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/phy/marvell,mmp3-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP3 USB PHY bindings
+title: Marvell MMP3 USB PHY
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/dts/Bindings/phy/mediatek,dsi-phy.yaml b/dts/Bindings/phy/mediatek,dsi-phy.yaml
index 9c2a734595..26f2b887cf 100644
--- a/dts/Bindings/phy/mediatek,dsi-phy.yaml
+++ b/dts/Bindings/phy/mediatek,dsi-phy.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
+title: MediaTek MIPI Display Serial Interface (DSI) PHY
 
 maintainers:
   - Chun-Kuang Hu <chunkuang.hu@kernel.org>
diff --git a/dts/Bindings/phy/mediatek,hdmi-phy.yaml b/dts/Bindings/phy/mediatek,hdmi-phy.yaml
index 0d94950b84..6cfdaadec0 100644
--- a/dts/Bindings/phy/mediatek,hdmi-phy.yaml
+++ b/dts/Bindings/phy/mediatek,hdmi-phy.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding
+title: MediaTek High Definition Multimedia Interface (HDMI) PHY
 
 maintainers:
   - Chun-Kuang Hu <chunkuang.hu@kernel.org>
diff --git a/dts/Bindings/phy/mediatek,ufs-phy.yaml b/dts/Bindings/phy/mediatek,ufs-phy.yaml
index 74cc32c1d2..3e62b5d4da 100644
--- a/dts/Bindings/phy/mediatek,ufs-phy.yaml
+++ b/dts/Bindings/phy/mediatek,ufs-phy.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/phy/mediatek,ufs-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek Universal Flash Storage (UFS) M-PHY binding
+title: MediaTek Universal Flash Storage (UFS) M-PHY
 
 maintainers:
   - Stanley Chu <stanley.chu@mediatek.com>
diff --git a/dts/Bindings/phy/phy-cadence-sierra.yaml b/dts/Bindings/phy/phy-cadence-sierra.yaml
index a9e227d8b0..6a09472740 100644
--- a/dts/Bindings/phy/phy-cadence-sierra.yaml
+++ b/dts/Bindings/phy/phy-cadence-sierra.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Cadence Sierra PHY binding
+title: Cadence Sierra PHY
 
 description:
   This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink
diff --git a/dts/Bindings/phy/phy-cadence-torrent.yaml b/dts/Bindings/phy/phy-cadence-torrent.yaml
index 2fec9e54ad..2ad1faadda 100644
--- a/dts/Bindings/phy/phy-cadence-torrent.yaml
+++ b/dts/Bindings/phy/phy-cadence-torrent.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Cadence Torrent SD0801 PHY binding
+title: Cadence Torrent SD0801 PHY
 
 description:
   This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
diff --git a/dts/Bindings/phy/phy-stm32-usbphyc.yaml b/dts/Bindings/phy/phy-stm32-usbphyc.yaml
index 801993813b..5b4c915cc9 100644
--- a/dts/Bindings/phy/phy-stm32-usbphyc.yaml
+++ b/dts/Bindings/phy/phy-stm32-usbphyc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 USB HS PHY controller binding
+title: STMicroelectronics STM32 USB HS PHY controller
 
 description:
 
diff --git a/dts/Bindings/phy/phy-tegra194-p2u.yaml b/dts/Bindings/phy/phy-tegra194-p2u.yaml
index 4dc5205d89..445b2467f4 100644
--- a/dts/Bindings/phy/phy-tegra194-p2u.yaml
+++ b/dts/Bindings/phy/phy-tegra194-p2u.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: NVIDIA Tegra194 & Tegra234 P2U binding
+title: NVIDIA Tegra194 & Tegra234 P2U
 
 maintainers:
   - Thierry Reding <treding@nvidia.com>
diff --git a/dts/Bindings/phy/qcom,qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 324ad7d03a..62045dcfb2 100644
--- a/dts/Bindings/phy/qcom,qmp-pcie-phy.yaml
+++ b/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,ipq8074-qmp-pcie-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (PCIe)
+title: Qualcomm QMP PHY controller (PCIe, IPQ8074)
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -13,6 +13,9 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-pcie-phy.yaml.
+
 properties:
   compatible:
     enum:
diff --git a/dts/Bindings/phy/qcom,qmp-ufs-phy.yaml b/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
index 815c375d0f..be41acbd3b 100644
--- a/dts/Bindings/phy/qcom,qmp-ufs-phy.yaml
+++ b/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-ufs-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-ufs-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (UFS)
+title: Qualcomm QMP PHY controller (UFS, MSM8996)
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -13,13 +13,15 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-ufs-phy.yaml.
+
 properties:
   compatible:
     enum:
       - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,sc8180x-qmp-ufs-phy
-      - qcom,sc8280xp-qmp-ufs-phy
       - qcom,sdm845-qmp-ufs-phy
       - qcom,sm6115-qmp-ufs-phy
       - qcom,sm6350-qmp-ufs-phy
@@ -119,7 +121,6 @@ allOf:
             enum:
               - qcom,msm8998-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6115-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
@@ -156,7 +157,6 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
               - qcom,sm8150-qmp-ufs-phy
@@ -211,11 +211,12 @@ allOf:
 
 examples:
   - |
-    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
+
     phy-wrapper@1d87000 {
-        compatible = "qcom,sc8280xp-qmp-ufs-phy";
-        reg = <0x01d87000 0xe10>;
+        compatible = "qcom,sm8250-qmp-ufs-phy";
+        reg = <0x01d87000 0x1c0>;
         #address-cells = <1>;
         #size-cells = <1>;
         ranges = <0x0 0x01d87000 0x1000>;
diff --git a/dts/Bindings/phy/qcom,qmp-usb-phy.yaml b/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
index 7acb4b7de7..0c6b3ba734 100644
--- a/dts/Bindings/phy/qcom,qmp-usb-phy.yaml
+++ b/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-usb3-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (USB)
+title: Qualcomm QMP PHY controller (USB, MSM8996)
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -13,6 +13,9 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-usb3-uni-phy.yaml.
+
 properties:
   compatible:
     enum:
@@ -23,7 +26,6 @@ properties:
       - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-usb3-phy
-      - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
@@ -201,7 +203,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
@@ -273,16 +274,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc8280xp-qmp-usb3-uni-phy
-    then:
-      required:
-        - power-domains
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,sdm845-qmp-usb3-phy
               - qcom,sm8150-qmp-usb3-phy
               - qcom,sm8350-qmp-usb3-phy
@@ -349,7 +340,6 @@ allOf:
           contains:
             enum:
               - qcom,msm8996-qmp-usb3-phy
-              - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
               - qcom,sm8350-qmp-usb3-uni-phy
     then:
diff --git a/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
index 97a7ecafbf..d9d0ab90ed 100644
--- a/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
@@ -2,10 +2,17 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP USB3 DP PHY controller
+title: Qualcomm QMP USB3 DP PHY controller (SC7180)
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
+
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-usb43dp-phy.yaml.
 
 maintainers:
   - Wesley Cheng <quic_wcheng@quicinc.com>
@@ -16,7 +23,6 @@ properties:
       - qcom,sc7180-qmp-usb3-dp-phy
       - qcom,sc7280-qmp-usb3-dp-phy
       - qcom,sc8180x-qmp-usb3-dp-phy
-      - qcom,sc8280xp-qmp-usb43dp-phy
       - qcom,sdm845-qmp-usb3-dp-phy
       - qcom,sm8250-qmp-usb3-dp-phy
   reg:
@@ -162,17 +168,6 @@ required:
 
 additionalProperties: false
 
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8280xp-qmp-usb43dp-phy
-    then:
-      required:
-        - power-domains
-
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
new file mode 100644
index 0000000000..80aa8d2507
--- /dev/null
+++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-gen3x1-pcie-phy
+      - qcom,sc8280xp-qmp-gen3x2-pcie-phy
+      - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: rchng
+      - const: pipe
+      - const: pipediv2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  qcom,4ln-config-sel:
+    description: PCIe 4-lane configuration
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of TCSR syscon
+          - description: offset of PCIe 4-lane configuration register
+          - description: offset of configuration bit for this PHY
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+    then:
+      properties:
+        reg:
+          items:
+            - description: port a
+            - description: port b
+      required:
+        - qcom,4ln-config-sel
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    pcie2b_phy: phy@1c18000 {
+      compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+      reg = <0x01c18000 0x2000>;
+
+      clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+               <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+               <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+               <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
+               <&gcc GCC_PCIE_2B_PIPE_CLK>,
+               <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
+      clock-names = "aux", "cfg_ahb", "ref", "rchng",
+                    "pipe", "pipediv2";
+
+      power-domains = <&gcc PCIE_2B_GDSC>;
+
+      resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
+      reset-names = "phy";
+
+      vdda-phy-supply = <&vreg_l6d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      #clock-cells = <0>;
+      clock-output-names = "pcie_2b_pipe_clk";
+
+      #phy-cells = <0>;
+    };
+
+    pcie2a_phy: phy@1c24000 {
+      compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+      reg = <0x01c24000 0x2000>, <0x01c26000 0x2000>;
+
+      clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+               <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+               <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+               <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
+               <&gcc GCC_PCIE_2A_PIPE_CLK>,
+               <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
+      clock-names = "aux", "cfg_ahb", "ref", "rchng",
+                    "pipe", "pipediv2";
+
+      power-domains = <&gcc PCIE_2A_GDSC>;
+
+      resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
+      reset-names = "phy";
+
+      vdda-phy-supply = <&vreg_l6d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      qcom,4ln-config-sel = <&tcsr 0xa044 0>;
+
+      #clock-cells = <0>;
+      clock-output-names = "pcie_2a_pipe_clk";
+
+      #phy-cells = <0>;
+    };
diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
new file mode 100644
index 0000000000..dde86a19f7
--- /dev/null
+++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (UFS, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-ufs-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ref_aux
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ufsphy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    ufs_mem_phy: phy@1d87000 {
+        compatible = "qcom,sc8280xp-qmp-ufs-phy";
+        reg = <0x01d87000 0x1000>;
+
+        clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+        clock-names = "ref", "ref_aux";
+
+        power-domains = <&gcc UFS_PHY_GDSC>;
+
+        resets = <&ufs_mem_hc 0>;
+        reset-names = "ufsphy";
+
+        vdda-phy-supply = <&vreg_l6b>;
+        vdda-pll-supply = <&vreg_l3b>;
+
+        #phy-cells = <0>;
+    };
diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
new file mode 100644
index 0000000000..16fce10382
--- /dev/null
+++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-usb3-uni-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aux
+      - const: ref
+      - const: com_aux
+      - const: pipe
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy@88ef000 {
+      compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+      reg = <0x088ef000 0x2000>;
+
+      clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+               <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+               <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+               <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+      clock-names = "aux", "ref", "com_aux", "pipe";
+
+      power-domains = <&gcc USB30_MP_GDSC>;
+
+      resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+               <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+      reset-names = "phy", "phy_phy";
+
+      vdda-phy-supply = <&vreg_l3a>;
+      vdda-pll-supply = <&vreg_l5a>;
+
+      #clock-cells = <0>;
+      clock-output-names = "usb2_phy0_pipe_clk";
+
+      #phy-cells = <0>;
+    };
diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
new file mode 100644
index 0000000000..6f31693d98
--- /dev/null
+++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP USB4-USB3-DP PHY controller (SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-usb43dp-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aux
+      - const: ref
+      - const: com_aux
+      - const: usb3_pipe
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 1
+    description:
+      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+
+  "#phy-cells":
+    const: 1
+    description:
+      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    phy@88eb000 {
+      compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+      reg = <0x088eb000 0x4000>;
+
+      clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+               <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+               <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+               <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+      clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+      power-domains = <&gcc USB30_PRIM_GDSC>;
+
+      resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+               <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
+      reset-names = "phy", "common";
+
+      vdda-phy-supply = <&vreg_l9d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      #clock-cells = <1>;
+      #phy-cells = <1>;
+    };
diff --git a/dts/Bindings/phy/qcom,usb-hs-phy.yaml b/dts/Bindings/phy/qcom,usb-hs-phy.yaml
index 0655e485b2..aa97478dd0 100644
--- a/dts/Bindings/phy/qcom,usb-hs-phy.yaml
+++ b/dts/Bindings/phy/qcom,usb-hs-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm's USB HS PHY binding description
+title: Qualcomm's USB HS PHY
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
diff --git a/dts/Bindings/phy/renesas,r8a779f0-ether-serdes.yaml b/dts/Bindings/phy/renesas,r8a779f0-ether-serdes.yaml
new file mode 100644
index 0000000000..93ab728742
--- /dev/null
+++ b/dts/Bindings/phy/renesas,r8a779f0-ether-serdes.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,r8a779f0-ether-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet SERDES
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ether-serdes
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#phy-cells':
+    description: Port number of SERDES.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    phy@e6444000 {
+        compatible = "renesas,r8a779f0-ether-serdes";
+        reg = <0xe6444000 0xc00>;
+        clocks = <&cpg CPG_MOD 1506>;
+        power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+        resets = <&cpg 1506>;
+        #phy-cells = <1>;
+    };
diff --git a/dts/Bindings/phy/ti,phy-am654-serdes.yaml b/dts/Bindings/phy/ti,phy-am654-serdes.yaml
index 62dcb84c08..738c92bb75 100644
--- a/dts/Bindings/phy/ti,phy-am654-serdes.yaml
+++ b/dts/Bindings/phy/ti,phy-am654-serdes.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/ti,phy-am654-serdes.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI AM654 SERDES binding
+title: TI AM654 SERDES
 
 description:
   This binding describes the TI AM654 SERDES. AM654 SERDES can be configured
diff --git a/dts/Bindings/phy/ti,phy-gmii-sel.yaml b/dts/Bindings/phy/ti,phy-gmii-sel.yaml
index da7cac537e..6d46f57fa1 100644
--- a/dts/Bindings/phy/ti,phy-gmii-sel.yaml
+++ b/dts/Bindings/phy/ti,phy-gmii-sel.yaml
@@ -5,7 +5,7 @@
 $id: "http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: CPSW Port's Interface Mode Selection PHY Tree Bindings
+title: CPSW Port's Interface Mode Selection PHY
 
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
@@ -54,6 +54,7 @@ properties:
       - ti,dm814-phy-gmii-sel
       - ti,am654-phy-gmii-sel
       - ti,j7200-cpsw5g-phy-gmii-sel
+      - ti,j721e-cpsw9g-phy-gmii-sel
 
   reg:
     maxItems: 1
@@ -63,14 +64,17 @@ properties:
   ti,qsgmii-main-ports:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
-      Required only for QSGMII mode. Array to select the port for
-      QSGMII main mode. Rest of the ports are selected as QSGMII_SUB
-      ports automatically. Any one of the 4 CPSW5G ports can act as the
-      main port with the rest of them being the QSGMII_SUB ports.
-    maxItems: 1
+      Required only for QSGMII mode. Array to select the port/s for QSGMII
+      main mode. The size of the array corresponds to the number of QSGMII
+      interfaces and thus, the number of distinct QSGMII main ports,
+      supported by the device. If the device supports two QSGMII interfaces
+      but only one QSGMII interface is desired, repeat the QSGMII main port
+      value corresponding to the QSGMII interface in the array.
+    minItems: 1
+    maxItems: 2
     items:
       minimum: 1
-      maximum: 4
+      maximum: 8
 
 allOf:
   - if:
@@ -81,6 +85,8 @@ allOf:
               - ti,dra7xx-phy-gmii-sel
               - ti,dm814-phy-gmii-sel
               - ti,am654-phy-gmii-sel
+              - ti,j7200-cpsw5g-phy-gmii-sel
+              - ti,j721e-cpsw9g-phy-gmii-sel
     then:
       properties:
         '#phy-cells':
@@ -88,12 +94,42 @@ allOf:
           description: CPSW port number (starting from 1)
 
   - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,j7200-cpsw5g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports:
+          maxItems: 1
+          items:
+            minimum: 1
+            maximum: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,j721e-cpsw9g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports:
+          minItems: 2
+          maxItems: 2
+          items:
+            minimum: 1
+            maximum: 8
+
+  - if:
       not:
         properties:
           compatible:
             contains:
               enum:
                 - ti,j7200-cpsw5g-phy-gmii-sel
+                - ti,j721e-cpsw9g-phy-gmii-sel
     then:
       properties:
         ti,qsgmii-main-ports: false
diff --git a/dts/Bindings/phy/ti,phy-j721e-wiz.yaml b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml
index 2225925b6d..c54b36c104 100644
--- a/dts/Bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml
@@ -15,8 +15,10 @@ properties:
     enum:
       - ti,j721e-wiz-16g
       - ti,j721e-wiz-10g
+      - ti,j721s2-wiz-10g
       - ti,am64-wiz-10g
       - ti,j7200-wiz-10g
+      - ti,j784s4-wiz-10g
 
   power-domains:
     maxItems: 1
diff --git a/dts/Bindings/phy/transmit-amplitude.yaml b/dts/Bindings/phy/transmit-amplitude.yaml
index 51492fe738..617f3c0b3d 100644
--- a/dts/Bindings/phy/transmit-amplitude.yaml
+++ b/dts/Bindings/phy/transmit-amplitude.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common PHY and network PCS transmit amplitude property binding
+title: Common PHY and network PCS transmit amplitude property
 
 description:
   Binding describing the peak-to-peak transmit amplitude for common PHYs
diff --git a/dts/Bindings/pinctrl/fsl,imxrt1050.yaml b/dts/Bindings/pinctrl/fsl,imxrt1050.yaml
index 1278f72935..db5fe66ad8 100644
--- a/dts/Bindings/pinctrl/fsl,imxrt1050.yaml
+++ b/dts/Bindings/pinctrl/fsl,imxrt1050.yaml
@@ -35,7 +35,7 @@ patternProperties:
           each entry consists of 6 integers and represents the mux and config
           setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
           mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last
+          be found in <arch/arm/boot/dts/imxrt1050-pinfunc.h>. The last
           integer CONFIG is the pad setting value like pull-up on this pin. Please
           refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
         $ref: /schemas/types.yaml#/definitions/uint32-matrix
diff --git a/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml
index 45ea565ce2..fcd729afee 100644
--- a/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - Pinctrl Based on SCU Message Protocol
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml
index c2c370448b..a4397930e0 100644
--- a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml
+++ b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs pin controller devicetree bindings
+title: Ingenic SoCs pin controller
 
 description: >
   Please refer to pinctrl-bindings.txt in this directory for details of the
diff --git a/dts/Bindings/pinctrl/intel,lgm-io.yaml b/dts/Bindings/pinctrl/intel,lgm-io.yaml
index b425483501..ca0fef6e53 100644
--- a/dts/Bindings/pinctrl/intel,lgm-io.yaml
+++ b/dts/Bindings/pinctrl/intel,lgm-io.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/intel,lgm-io.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
+title: Intel Lightning Mountain SoC pinmux & GPIO controller
 
 maintainers:
   - Rahul Tanwar <rahul.tanwar@linux.intel.com>
diff --git a/dts/Bindings/pinctrl/loongson,ls2k-pinctrl.yaml b/dts/Bindings/pinctrl/loongson,ls2k-pinctrl.yaml
new file mode 100644
index 0000000000..bd8a458435
--- /dev/null
+++ b/dts/Bindings/pinctrl/loongson,ls2k-pinctrl.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/loongson,ls2k-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Pinctrl Controller
+
+maintainers:
+  - zhanghongchen <zhanghongchen@loongson.cn>
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    const: loongson,ls2k-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+
+    additionalProperties: false
+
+    patternProperties:
+      'pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        unevaluatedProperties: false
+
+        properties:
+          groups:
+            description:
+              One or more groups of pins to mux to a certain function
+            items:
+              enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
+                     nand, sata_led, i2s, hda]
+          function:
+            description:
+              The function that a group of pins is muxed to
+            enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
+                   nand, sata_led, i2s, hda]
+
+        required:
+          - groups
+          - function
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pctrl: pinctrl@1fe00420 {
+        compatible = "loongson,ls2k-pinctrl";
+        reg = <0x1fe00420 0x18>;
+        sdio_pins_default: sdio-pins {
+            sdio-pinmux {
+                groups = "sdio";
+                function = "sdio";
+            };
+
+            sdio-det-pinmux {
+                groups = "pwm2";
+                function = "gpio";
+            };
+        };
+
+        pwm1_pins_default: pwm1-pins {
+            pinmux {
+                groups = "pwm1";
+                function = "pwm1";
+            };
+        };
+
+        pwm0_pins_default: pwm0-pins {
+            pinmux {
+                groups = "pwm0";
+                function = "pwm0";
+            };
+        };
+
+        i2c1_pins_default: i2c1-pins {
+            pinmux {
+                groups = "i2c1";
+                function = "i2c1";
+            };
+        };
+
+        i2c0_pins_default: i2c0-pins {
+            pinmux {
+                groups = "i2c0";
+                function = "i2c0";
+            };
+        };
+
+        nand_pins_default: nand-pins {
+            pinmux {
+                groups = "nand";
+                function = "nand";
+            };
+        };
+
+        hda_pins_default: hda-pins {
+            grp0-pinmux {
+                groups = "hda";
+                function = "hda";
+            };
+
+            grp1-pinmux {
+                groups = "i2s";
+                function = "gpio";
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index 33b5f79e74..1b44335b1e 100644
--- a/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -31,7 +31,8 @@ properties:
   pins-are-numbered:
     $ref: /schemas/types.yaml#/definitions/flag
     description: |
-      Specify the subnodes are using numbered pinmux to specify pins.
+      Specify the subnodes are using numbered pinmux to specify pins. (UNUSED)
+    deprecated: true
 
   gpio-controller: true
 
@@ -62,7 +63,6 @@ properties:
 
 required:
   - compatible
-  - pins-are-numbered
   - gpio-controller
   - "#gpio-cells"
 
@@ -150,7 +150,6 @@ examples:
           compatible = "mediatek,mt8135-pinctrl";
           reg = <0 0x1000B000 0 0x1000>;
           mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
-          pins-are-numbered;
           gpio-controller;
           #gpio-cells = <2>;
           interrupt-controller;
diff --git a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 8c79fcef7c..a2141eb085 100644
--- a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -8,31 +8,22 @@ title: Mediatek MT6779 Pin Controller
 
 maintainers:
   - Andy Teng <andy.teng@mediatek.com>
+  - Sean Wang <sean.wang@kernel.org>
 
-description: |+
-  The pin controller node should be the child of a syscon node with the
-  required property:
-  - compatible: "syscon"
+description:
+  The MediaTek pin controller on MT6779 is used to control pin
+  functions, pull up/down resistance and drive strength options.
 
 properties:
   compatible:
-    const: mediatek,mt6779-pinctrl
+    enum:
+      - mediatek,mt6779-pinctrl
+      - mediatek,mt6797-pinctrl
 
   reg:
-    minItems: 9
-    maxItems: 9
-
-  reg-names:
-    items:
-      - const: "gpio"
-      - const: "iocfg_rm"
-      - const: "iocfg_br"
-      - const: "iocfg_lm"
-      - const: "iocfg_lb"
-      - const: "iocfg_rt"
-      - const: "iocfg_lt"
-      - const: "iocfg_tl"
-      - const: "eint"
+    description: Physical addresses for GPIO base(s) and EINT registers.
+
+  reg-names: true
 
   gpio-controller: true
 
@@ -59,19 +50,65 @@ properties:
   "#interrupt-cells":
     const: 2
 
-allOf:
-  - $ref: "pinctrl.yaml#"
-
 required:
   - compatible
   - reg
   - reg-names
   - gpio-controller
   - "#gpio-cells"
-  - gpio-ranges
-  - interrupt-controller
-  - interrupts
-  - "#interrupt-cells"
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6779-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 9
+          maxItems: 9
+
+        reg-names:
+          items:
+            - const: gpio
+            - const: iocfg_rm
+            - const: iocfg_br
+            - const: iocfg_lm
+            - const: iocfg_lb
+            - const: iocfg_rt
+            - const: iocfg_lt
+            - const: iocfg_tl
+            - const: eint
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6797-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+
+        reg-names:
+          items:
+            - const: gpio
+            - const: iocfgl
+            - const: iocfgb
+            - const: iocfgr
+            - const: iocfgt
+  - if:
+      properties:
+        reg-names:
+          contains:
+            const: eint
+    then:
+      required:
+        - interrupts
+        - interrupt-controller
+        - "#interrupt-cells"
 
 patternProperties:
   '-[0-9]*$':
@@ -113,6 +150,12 @@ patternProperties:
 
           input-schmitt-disable: true
 
+          drive-strength:
+            enum: [2, 4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
           mediatek,pull-up-adv:
             description: |
               Pull up setings for 2 pull resistors, R0 and R1. User can
diff --git a/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
deleted file mode 100644
index 637a8386e2..0000000000
--- a/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+++ /dev/null
@@ -1,176 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek MT6797 Pin Controller
-
-maintainers:
-  - Sean Wang <sean.wang@kernel.org>
-
-description: |+
-  The MediaTek's MT6797 Pin controller is used to control SoC pins.
-
-properties:
-  compatible:
-    const: mediatek,mt6797-pinctrl
-
-  reg:
-    minItems: 5
-    maxItems: 5
-
-  reg-names:
-    items:
-      - const: gpio
-      - const: iocfgl
-      - const: iocfgb
-      - const: iocfgr
-      - const: iocfgt
-
-  gpio-controller: true
-
-  "#gpio-cells":
-    const: 2
-    description: |
-      Number of cells in GPIO specifier. Since the generic GPIO
-      binding is used, the amount of cells must be specified as 2. See the below
-      mentioned gpio binding representation for description of particular cells.
-
-  interrupt-controller: true
-
-  interrupts:
-    maxItems: 1
-
-  "#interrupt-cells":
-    const: 2
-
-allOf:
-  - $ref: "pinctrl.yaml#"
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - gpio-controller
-  - "#gpio-cells"
-
-patternProperties:
-  '-[0-9]+$':
-    type: object
-    additionalProperties: false
-    patternProperties:
-      'pins':
-        type: object
-        additionalProperties: false
-        description: |
-          A pinctrl node should contain at least one subnodes representing the
-          pinctrl groups available on the machine. Each subnode will list the
-          pins it needs, and how they should be configured, with regard to muxer
-          configuration, pullups, drive strength, input enable/disable and input
-          schmitt.
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
-
-        properties:
-          pinmux:
-            description:
-              integer array, represents gpio pin number and mux setting.
-              Supported pin number and mux varies for different SoCs, and are
-              defined as macros in <soc>-pinfunc.h directly.
-
-          bias-disable: true
-
-          bias-pull-up: true
-
-          bias-pull-down: true
-
-          input-enable: true
-
-          input-disable: true
-
-          output-enable: true
-
-          output-low: true
-
-          output-high: true
-
-          input-schmitt-enable: true
-
-          input-schmitt-disable: true
-
-          drive-strength:
-            enum: [2, 4, 8, 12, 16]
-
-          slew-rate:
-            enum: [0, 1]
-
-          mediatek,pull-up-adv:
-            description: |
-              Pull up setings for 2 pull resistors, R0 and R1. User can
-              configure those special pins. Valid arguments are described as below:
-              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
-              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
-              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
-              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3]
-
-          mediatek,pull-down-adv:
-            description: |
-              Pull down settings for 2 pull resistors, R0 and R1. User can
-              configure those special pins. Valid arguments are described as below:
-              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
-              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
-              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
-              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3]
-
-          mediatek,tdsel:
-            description: |
-              An integer describing the steps for output level shifter duty
-              cycle when asserted (high pulse width adjustment). Valid arguments
-              are from 0 to 15.
-            $ref: /schemas/types.yaml#/definitions/uint32
-
-          mediatek,rdsel:
-            description: |
-              An integer describing the steps for input level shifter duty cycle
-              when asserted (high pulse width adjustment). Valid arguments are
-              from 0 to 63.
-            $ref: /schemas/types.yaml#/definitions/uint32
-
-        required:
-          - pinmux
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/pinctrl/mt6797-pinfunc.h>
-
-    soc {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        pio: pinctrl@10005000 {
-            compatible = "mediatek,mt6797-pinctrl";
-            reg = <0 0x10005000 0 0x1000>,
-                  <0 0x10002000 0 0x400>,
-                  <0 0x10002400 0 0x400>,
-                  <0 0x10002800 0 0x400>,
-                  <0 0x10002C00 0 0x400>;
-            reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
-            gpio-controller;
-            #gpio-cells = <2>;
-
-            uart_pins_a: uart-0 {
-                pins1 {
-                    pinmux = <MT6797_GPIO232__FUNC_URXD1>,
-                            <MT6797_GPIO233__FUNC_UTXD1>;
-                };
-            };
-        };
-    };
diff --git a/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 89b8f3dd67..216b356cd5 100644
--- a/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -87,6 +87,8 @@ patternProperties:
           "wifi_led"        "led"       1, 2
           "i2c"             "i2c"       3, 4
           "uart1_0"         "uart"      7, 8, 9, 10
+          "uart1_rx_tx"     "uart"      42, 43
+          "uart1_cts_rts"   "uart"      44, 45
           "pcie_clk"        "pcie"      9
           "pcie_wake"       "pcie"      10
           "spi1_0"          "spi"       11, 12, 13, 14
@@ -98,9 +100,11 @@ patternProperties:
           "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
                                         31, 32
           "spi1_1"          "spi"       23, 24, 25, 26
-          "uart1_2"         "uart"      29, 30, 31, 32
+          "uart1_2_rx_tx"   "uart"      29, 30
+          "uart1_2_cts_rts" "uart"      31, 32
           "uart1_1"         "uart"      23, 24, 25, 26
-          "uart2_0"         "uart"      29, 30, 31, 32
+          "uart2_0_rx_tx"   "uart"      29, 30
+          "uart2_0_cts_rts" "uart"      31, 32
           "spi0"            "spi"       33, 34, 35, 36
           "spi0_wp_hold"    "spi"       37, 38
           "uart1_3_rx_tx"   "uart"      35, 36
@@ -157,7 +161,7 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  enum: [emmc_45, emmc_51]
           - if:
               properties:
                 function:
@@ -197,7 +201,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pcie_clk, pcie_wake, pcie_pereset]
+                  items:
+                    enum: [pcie_clk, pcie_wake, pcie_pereset]
+                  maxItems: 3
           - if:
               properties:
                 function:
@@ -205,7 +211,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pwm0, pwm1_0, pwm1_1]
+                  items:
+                    enum: [pwm0, pwm1_0, pwm1_1]
+                  maxItems: 2
           - if:
               properties:
                 function:
@@ -213,7 +221,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+                  items:
+                    enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+                  maxItems: 2
           - if:
               properties:
                 function:
@@ -221,8 +231,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
-                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+                  items:
+                    enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1,
+                           uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx,
+                           uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts,
+                           uart2_1, uart0, uart1, uart2]
+                  maxItems: 2
           - if:
               properties:
                 function:
@@ -278,9 +292,23 @@ patternProperties:
 
           bias-disable: true
 
-          bias-pull-up: true
-
-          bias-pull-down: true
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description: |
+                  PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+                  dt-bindings/pinctrl/mt65xx.h.
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description: |
+                  PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+                  dt-bindings/pinctrl/mt65xx.h.
 
           input-enable: true
 
@@ -332,6 +360,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt65xx.h>
 
     soc {
       #address-cells = <2>;
@@ -356,6 +385,27 @@ examples:
         interrupt-parent = <&gic>;
         #interrupt-cells = <2>;
 
+        pcie_pins: pcie-pins {
+          mux {
+            function = "pcie";
+            groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+          };
+        };
+
+        pwm_pins: pwm-pins {
+          mux {
+            function = "pwm";
+            groups = "pwm0", "pwm1_0";
+          };
+        };
+
+        spi0_pins: spi0-pins {
+          mux {
+            function = "spi";
+            groups = "spi0", "spi0_wp_hold";
+          };
+        };
+
         uart1_pins: uart1-pins {
           mux {
             function = "uart";
@@ -363,6 +413,13 @@ examples:
           };
         };
 
+        uart1_3_pins: uart1-3-pins {
+          mux {
+            function = "uart";
+            groups = "uart1_3_rx_tx", "uart1_3_cts_rts";
+          };
+        };
+
         uart2_pins: uart2-pins {
           mux {
             function = "uart";
@@ -370,5 +427,34 @@ examples:
           };
         };
 
+        mmc0_pins_default: mmc0-pins {
+          mux {
+            function = "emmc";
+            groups = "emmc_51";
+          };
+          conf-cmd-dat {
+            pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+                   "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+                   "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+            input-enable;
+            drive-strength = <4>;
+            bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+          };
+          conf-clk {
+            pins = "EMMC_CK";
+            drive-strength = <6>;
+            bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+          };
+          conf-ds {
+            pins = "EMMC_DSL";
+            bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+          };
+          conf-rst {
+            pins = "EMMC_RSTB";
+            drive-strength = <4>;
+            bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+          };
+        };
+
       };
     };
diff --git a/dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
index 73ae6e1141..9399e02155 100644
--- a/dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
+++ b/dts/Bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
@@ -46,8 +46,11 @@ properties:
     const: 2
 
   interrupts:
-    description: The interrupt outputs to sysirq.
-    maxItems: 1
+    description: Interrupt outputs to the system interrupt controller (sysirq).
+    minItems: 1
+    items:
+      - description: EINT interrupt
+      - description: EINT event_b interrupt
 
 # PIN CONFIGURATION NODES
 patternProperties:
diff --git a/dts/Bindings/pinctrl/nvidia,tegra-pinmux-common.yaml b/dts/Bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
new file mode 100644
index 0000000000..96c608bcb8
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of
+  the phrase "pin configuration node".
+
+  Tegra's pin configuration nodes act as a container for an arbitrary number
+  of subnodes. Each of these subnodes represents some desired configuration
+  for a pin, a group, or a list of pins or groups. This configuration can
+  include the mux function to select on those pin(s)/ group(s), and various
+  pin configuration parameters, such as pull-up, tristate, drive strength,
+  etc.
+
+  The name of each subnode is not important; all subnodes should be
+  enumerated and processed purely based on their content.
+
+  Each subnode only affects those parameters that are explicitly listed. In
+  other words, a subnode that lists a mux function but no pin configuration
+  parameters implies no information about any pin configuration parameters.
+
+  Similarly, a pin subnode that describes a pullup parameter implies no
+  information about e.g.  the mux function or tristate parameter. For this
+  reason, even seemingly boolean values are actually tristates in this
+  binding: unspecified, off, or on. Unspecified is represented as an absent
+  property, and off/on are represented as integer values 0 and 1.
+
+  Note that many of these properties are only valid for certain specific pins
+  or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+  details regarding which groups support which functionality. The Linux
+  pinctrl driver may also be a useful reference, since it consolidates,
+  disambiguates, and corrects data from all those sources.
+
+properties:
+  nvidia,pins:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: An array of strings. Each string contains the name of a pin
+      or group.  Valid values for these names are listed below.
+
+  nvidia,function:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: A string containing the name of the function to mux to the
+      pin or group. Valid values for function names are listed below. See the
+      Tegra TRM to determine which are valid for each pin or group.
+
+  nvidia,pull:
+    description: Pull-down/up setting to apply to the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: none
+        const: 0
+      - description: down
+        const: 1
+      - description: up
+        const: 2
+
+  nvidia,tristate:
+    description: Tristate setting to apply to the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: drive
+        const: 0
+      - description: tristate
+        const: 1
+
+  nvidia,schmitt:
+    description: Enable Schmitt trigger on the input.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable Schmitt trigger on the input
+        const: 0
+      - description: enable Schmitt trigger on the input
+        const: 1
+
+  nvidia,pull-down-strength:
+    description: Controls drive strength. 0 is weakest. The range of valid
+      values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pull-up-strength:
+    description: Controls drive strength. 0 is weakest. The range of valid
+      values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,high-speed-mode:
+    description: Enable high speed mode the pins.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: normal speed mode
+        const: 0
+      - description: high speed mode
+        const: 1
+
+  nvidia,low-power-mode:
+    description: Controls the drive power or current. Valid values are from 0
+      through 3, where 0 specifies the least power and 3 specifies the most
+      power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  nvidia,enable-input:
+    description: Enable the pin's input path.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable input (i.e. output only)
+        const: 0
+      - description: enable input
+        const: 1
+
+  nvidia,open-drain:
+    description: Open-drain configuration for the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable open-drain
+        const: 0
+      - description: enable open-drain
+        const: 1
+
+  nvidia,lock:
+    description: Lock the pin configuration against further changes until
+      reset.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable pin configuration lock
+        const: 0
+      - description: enable pin configuration lock
+        const: 1
+
+  nvidia,io-reset:
+    description: reset the I/O path
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+  nvidia,rcv-sel:
+    description: select VIL/VIH receivers
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: normal receivers
+        const: 0
+      - description: high-voltage receivers
+        const: 1
+
+  nvidia,drive-type:
+    description: Drive type to configure for the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  nvidia,io-hv:
+    description: Select high-voltage receivers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: Use normal receivers.
+        const: 0
+      - description: Use high-voltage receivers.
+        const: 1
+
+  nvidia,slew-rate-rising:
+    description: Controls rising signal slew rate. 0 is fastest. The range of
+      valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,slew-rate-falling:
+    description: Controls falling signal slew rate. 0 is fastest. The range of
+      valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+...
diff --git a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.txt
deleted file mode 100644
index fb70856c5b..0000000000
--- a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-NVIDIA Tegra114 pinmux controller
-
-The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30
-pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
-nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
-a baseline, and only documents the differences between the two bindings.
-
-Required properties:
-- compatible: "nvidia,tegra114-pinmux"
-- reg: Should contain the register physical address and length for each of
-  the pad control and mux registers. The first bank of address must be the
-  driver strength pad control register address and second bank address must
-  be pinmux register address.
-
-Tegra114 adds the following optional properties for pin configuration subnodes:
-- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
-- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset. 0: no, 1: yes.
-- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
-- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high.
-- nvidia,drive-type: Integer. Valid range 0...3.
-
-As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding
-which groups support which functionality.
-
-Valid values for pin and group names are:
-
-  per-pin mux groups:
-
-    These all support nvidia,function, nvidia,tristate, nvidia,pull,
-    nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
-    nvidia,io-reset and nvidia,rcv-sel.
-
-    ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
-    ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
-    ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
-    dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
-    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
-    sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
-    ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
-    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
-    uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5,
-    gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7,
-    clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
-    gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3,
-    gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0,
-    gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
-    gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
-    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
-    gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0,
-    gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5,
-    gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
-    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
-    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0,
-    pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
-    pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1,
-    kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6,
-    kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0,
-    kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
-    kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req,
-    cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
-    dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5,
-    dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
-    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4,
-    gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6,
-    sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
-    sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
-    gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5,
-    sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n.
-
-  drive groups:
-
-    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
-    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
-    and nvidia,drive-type.
-
-    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
-    dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
-    gmh, owr, uda.
-
-Valid values for nvidia,functions are:
-
-  blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
-  displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
-  extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
-  i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
-  pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
-  rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
-  spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
-  usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
-
-Example:
-
-	pinmux: pinmux {
-		compatible = "nvidia,tegra114-pinmux";
-		reg = <0x70000868 0x148		/* Pad control registers */
-		       0x70003000 0x40c>;	/* PinMux registers */
-	};
-
-Example board file extract:
-
-	pinctrl {
-		sdmmc4_default: pinmux {
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4",
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins = "sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	sdhci@78000400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc4_default>;
-	};
diff --git a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml
new file mode 100644
index 0000000000..065dedb357
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra114 pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra114-pinmux
+
+  reg:
+    items:
+      - description: pad control registers
+      - description: mux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+                    ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+                    ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+                    ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+                    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+                    sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+                    clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+                    uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+                    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+                    uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4,
+                    dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+                    clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
+                    gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2,
+                    gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3,
+                    gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+                    gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+                    gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+                    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+                    gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1,
+                    gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3,
+                    gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+                    sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+                    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+                    sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+                    sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0,
+                    kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4,
+                    kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0,
+                    kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1,
+                    kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+                    kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5,
+                    core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0,
+                    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2,
+                    clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2,
+                    dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+                    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+                    gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+                    gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+                    sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+                    sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
+                    sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3,
+                    usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5,
+                    sdmmc3_clk_lb_out_pee4, reset_out_n,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+                    drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_owr, drive_uda ]
+
+        nvidia,function:
+          enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+                  displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1,
+                  extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+                  i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+                  nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron,
+                  reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2,
+                  sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5,
+                  spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb,
+                  vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,rcv-sel: true
+        nvidia,drive-type: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    pinmux@70000868 {
+        compatible = "nvidia,tegra114-pinmux";
+        reg = <0x70000868 0x148>, /* Pad control registers */
+              <0x70003000 0x40c>; /* PinMux registers */
+
+        pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <2>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.txt
deleted file mode 100644
index f4d06bb0b5..0000000000
--- a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-NVIDIA Tegra124 pinmux controller
-
-The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30
-pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
-nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
-a baseline, and only documents the differences between the two bindings.
-
-Required properties:
-- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux".  For
-  Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'.
-- reg: Should contain a list of base address and size pairs for:
-    -- first entry - the drive strength and pad control registers.
-    -- second entry - the pinmux registers
-    -- third entry - the MIPI_PAD_CTRL register
-
-Tegra124 adds the following optional properties for pin configuration subnodes.
-The macros for options are defined in the
-	include/dt-binding/pinctrl/pinctrl-tegra.h.
-- nvidia,enable-input: Integer. Enable the pin's input path.
-		enable :TEGRA_PIN_ENABLE and
-		disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
-		enable: TEGRA_PIN_ENABLE.
-		disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset.
-		enable: TEGRA_PIN_ENABLE.
-		disable: TEGRA_PIN_DISABLE.
-- nvidia,io-reset: Integer. Reset the IO path.
-		enable: TEGRA_PIN_ENABLE.
-		disable: TEGRA_PIN_DISABLE.
-- nvidia,rcv-sel: Integer. Select VIL/VIH receivers.
-		normal: TEGRA_PIN_DISABLE
-		high: TEGRA_PIN_ENABLE
-
-Please refer the Tegra TRM for complete details regarding which groups
-support which functionality.
-
-Valid values for pin and group names are:
-
-  per-pin mux groups:
-
-    These all support nvidia,function, nvidia,tristate, nvidia,pull,
-    nvidia,enable-input. Some support nvidia,lock nvidia,open-drain,
-    nvidia,io-reset and nvidia,rcv-sel.
-
-	ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
-	ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
-	ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
-	dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
-	sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
-	sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
-	ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
-	uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
-	uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4,
-	gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6,
-	dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1,
-	pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6,
-	pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
-	pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4,
-	sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2,
-	sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
-	sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1,
-	cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck,
-	pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
-	kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
-	kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
-	kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1,
-	kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6,
-	kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
-	clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
-	dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6,
-	spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3,
-	dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
-	gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7,
-	sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6,
-	sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1,
-	pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5,
-	pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
-	sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
-	usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5,
-	gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1,
-	pff2, dp_hpd_pff0,
-
-  drive groups:
-
-    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
-    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
-    and nvidia,drive-type.
-
-    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
-    dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
-    gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4.
-
-  MIPI pad control groups:
-
-    These support only the nvidia,function property.
-
-    dsi_b
-
-Valid values for nvidia,functions are:
-
-  blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
-  displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3,
-  gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0,
-  i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3,
-  pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3,
-  sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
-  uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
-  vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1,
-  dp, rtck, sys, clk tmds, csi, dsi_b
-
-Example:
-
-	pinmux: pinmux {
-		compatible = "nvidia,tegra124-pinmux";
-		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
-		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
-		      <0x0 0x70000820 0x0 0x8>;   /* MIPI pad control */
-	};
-
-Example pinmux entries:
-
-	pinctrl {
-		sdmmc4_default: pinmux {
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4",
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			sdmmc4_dat0_paa0 {
-				nvidia,pins = "sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	sdhci@78000400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc4_default>;
-	};
diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml
new file mode 100644
index 0000000000..f924652bef
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra124 pinctrl binding is very similar to the Tegra20 and
+  Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and
+  nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a
+  baseline, and only documents the differences between the two bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra124-pinmux
+      - items:
+          - const: nvidia,tegra132-pinmux
+          - const: nvidia,tegra124-pinmux
+
+  reg:
+    items:
+      - description: driver strength and pad control registers
+      - description: pinmux registers
+      - description: MIPI_PAD_CTRL registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          $ref: /schemas/types.yaml#/definitions/string-array
+          items:
+            enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+                    ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+                    ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+                    ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+                    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+                    sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+                    clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+                    uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+                    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+                    uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4,
+                    dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+                    clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4,
+                    pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0,
+                    ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
+                    pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+                    sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+                    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+                    sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+                    sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7,
+                    kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3,
+                    kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+                    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3,
+                    kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7,
+                    kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3,
+                    kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7,
+                    clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
+                    clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
+                    dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4,
+                    spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4,
+                    dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+                    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+                    gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+                    gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+                    sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+                    sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+                    pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6,
+                    hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
+                    gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
+                    usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4,
+                    sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n,
+                    kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2,
+                    dp_hpd_pff0,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+                    drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv,
+                    drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3,
+                    drive_ao0, drive_hv0, drive_sdio4, drive_ao4,
+                    # MIPI pad control groups
+                    mipi_pad_ctrl_dsi_b ]
+
+        nvidia,function:
+          enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+                  displaya, displaya_alt, displayb, dtv, extperiph1,
+                  extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+                  i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+                  owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1,
+                  rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc,
+                  spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
+                  uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+                  vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla,
+                  pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,rcv-sel: true
+        nvidia,drive-type: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@70000868 {
+        compatible = "nvidia,tegra124-pinmux";
+        reg = <0x70000868 0x164>, /* Pad control registers */
+              <0x70003000 0x434>, /* Mux registers */
+              <0x70000820 0x8>;   /* MIPI pad control */
+
+        sdmmc4_default: pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <TEGRA_PIN_PULL_UP>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt
deleted file mode 100644
index 90d38f7106..0000000000
--- a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra194 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra194-pinmux"
-- reg: Should contain a list of base address and size pairs for:
-  - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
-  - second entry: The PINMUX_AUX_* registers (pinmux)
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-See the TRM to determine which properties and values apply to each pin/group.
-Macro values for property values are defined in
-include/dt-binding/pinctrl/pinctrl-tegra.h.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
-    group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
-    pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
-    0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
-    0: drive, 1: tristate.
-- nvidia,enable-input: Integer. Enable the pin's input path.
-    enable :TEGRA_PIN_ENABLE and
-    disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,io-hv: Integer. Select high-voltage receivers.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,drive-type: Integer. Valid range 0...3.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
-    Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
-    Tegra TRM.
-
-Valid values for pin and group names (nvidia,pin) are:
-
-    These correspond to Tegra PADCTL_* (pinmux) registers.
-
-  Mux groups:
-
-    These correspond to Tegra PADCTL_* (pinmux) registers. Any property
-    that exists in those registers may be set for the following pin names.
-
-    pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
-  Drive groups:
-
-    These registers controls a single pin for which a mux group exists.
-    See the list above for the pin name to use when configuring the pinmux.
-
-    pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
-Valid values for nvidia,functions are:
-
-    pe5
-
-Power Domain:
-    pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power
-    partition. Client devices must enable this partition before accessing
-    these pins here.
-
-
-Example:
-
-		tegra_pinctrl: pinmux: pinmux@2430000 {
-			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000
-			       0xc300000 0x4000>;
-
-			pinctrl-names = "pex_rst";
-			pinctrl-0 = <&pex_rst_c5_out_state>;
-
-			pex_rst_c5_out_state: pex_rst_c5_out {
-				pex_rst {
-					nvidia,pins = "pex_l5_rst_n_pgg1";
-					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
-					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
-					nvidia,tristate = <TEGRA_PIN_DISABLE>;
-					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				};
-			};
-		};
diff --git a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml
new file mode 100644
index 0000000000..60a4bdf01b
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml
@@ -0,0 +1,284 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pinmux
+      - nvidia,tegra194-pinmux-aon
+
+  reg:
+    items:
+      - description: pinmux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      unevaluatedProperties: false
+      properties:
+        nvidia,function:
+          enum: [ aud, can0, can1, ccla, dca, dcb, dgpu, directdc, directdc1,
+                  displaya, displayb, dmic1, dmic2, dmic3, dmic4, dmic5, dp,
+                  dspk0, dspk1, eqos, extperiph1, extperiph2, extperiph3,
+                  extperiph4, gp, gpio, hdmi, i2c1, i2c2, i2c3, i2c5, i2c8,
+                  i2s1, i2s2, i2s3, i2s4, i2s5, i2s6, igpu, iqc1, iqc2, mipi,
+                  nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0,
+                  rsvd1, rsvd2, rsvd3, sata, sce, sdmmc1, sdmmc3, sdmmc4, slvs,
+                  soc, spdif, spi1, spi2, spi3, touch, uarta, uartb, uartc,
+                  uartd, uarte, uartg, ufs0, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+                  vgp6, wdt ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-pinmux
+    then:
+      patternProperties:
+        "^pinmux(-[a-z0-9-_]+)?$":
+          type: object
+          additionalProperties:
+            properties:
+              nvidia,pins:
+                description: An array of strings. Each string contains the name
+                  of a pin or group. Valid values for these names are listed
+                  below.
+
+                  Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins
+                  are part of PCIE C5 power partition. Client devices must
+                  enable this partition before accessing the configuration for
+                  these pins.
+                items:
+                  enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+                          dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+                          dap4_din_pa6, dap4_fs_pa7, cpu_pwr_req_0_pb0,
+                          cpu_pwr_req_1_pb1, qspi0_sck_pc0, qspi0_cs_n_pc1,
+                          qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+                          qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+                          qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+                          qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+                          eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+                          eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+                          eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+                          eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+                          soc_gpio00_pg0, soc_gpio01_pg1, soc_gpio02_pg2,
+                          soc_gpio03_pg3, soc_gpio08_pg4, soc_gpio09_pg5,
+                          soc_gpio10_pg6, soc_gpio11_pg7, soc_gpio12_ph0,
+                          soc_gpio13_ph1, soc_gpio14_ph2, uart4_tx_ph3,
+                          uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+                          dap2_sclk_ph7, dap2_dout_pi0, dap2_din_pi1,
+                          dap2_fs_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+                          sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+                          sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+                          pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+                          pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+                          pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+                          pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+                          pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+                          pex_wake_n_pl2, sata_dev_slp_pl3, dp_aux_ch0_hpd_pm0,
+                          dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+                          dp_aux_ch3_hpd_pm3, hdmi_cec_pm4, soc_gpio50_pm5,
+                          soc_gpio51_pm6, soc_gpio52_pm7, soc_gpio53_pn0,
+                          soc_gpio54_pn1, soc_gpio55_pn2, sdmmc3_clk_po0,
+                          sdmmc3_cmd_po1, sdmmc3_dat0_po2, sdmmc3_dat1_po3,
+                          sdmmc3_dat2_po4, sdmmc3_dat3_po5, extperiph1_clk_pp0,
+                          extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+                          soc_gpio04_pp4, soc_gpio05_pp5, soc_gpio06_pp6,
+                          soc_gpio07_pp7, soc_gpio20_pq0, soc_gpio21_pq1,
+                          soc_gpio22_pq2, soc_gpio23_pq3, soc_gpio40_pq4,
+                          soc_gpio41_pq5, soc_gpio42_pq6, soc_gpio43_pq7,
+                          soc_gpio44_pr0, soc_gpio45_pr1, uart1_tx_pr2,
+                          uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+                          dap1_sclk_ps0, dap1_dout_ps1, dap1_din_ps2,
+                          dap1_fs_ps3, aud_mclk_ps4, soc_gpio30_ps5,
+                          soc_gpio31_ps6, soc_gpio32_ps7, soc_gpio33_pt0,
+                          dap3_sclk_pt1, dap3_dout_pt2, dap3_din_pt3,
+                          dap3_fs_pt4, dap5_sclk_pt5, dap5_dout_pt6,
+                          dap5_din_pt7, dap5_fs_pu0, directdc1_clk_pv0,
+                          directdc1_in_pv1, directdc1_out0_pv2,
+                          directdc1_out1_pv3, directdc1_out2_pv4,
+                          directdc1_out3_pv5, directdc1_out4_pv6,
+                          directdc1_out5_pv7, directdc1_out6_pw0,
+                          directdc1_out7_pw1, gpu_pwr_req_px0, cv_pwr_req_px1,
+                          gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, uart2_rx_px5,
+                          uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+                          spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+                          spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+                          uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+                          usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+                          spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+                          ufs0_ref_clk_pff0, ufs0_rst_pff1,
+                          pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1,
+                          directdc_comp, sdmmc4_clk, sdmmc4_cmd, sdmmc4_dqs,
+                          sdmmc4_dat7, sdmmc4_dat6, sdmmc4_dat5, sdmmc4_dat4,
+                          sdmmc4_dat3, sdmmc4_dat2, sdmmc4_dat1, sdmmc4_dat0,
+                          sdmmc1_comp, sdmmc1_hv_trim, sdmmc3_comp,
+                          sdmmc3_hv_trim, eqos_comp, qspi_comp,
+                          # drive groups
+                          drive_soc_gpio33_pt0, drive_soc_gpio32_ps7,
+                          drive_soc_gpio31_ps6, drive_soc_gpio30_ps5,
+                          drive_aud_mclk_ps4, drive_dap1_fs_ps3,
+                          drive_dap1_din_ps2, drive_dap1_dout_ps1,
+                          drive_dap1_sclk_ps0, drive_dap3_fs_pt4,
+                          drive_dap3_din_pt3, drive_dap3_dout_pt2,
+                          drive_dap3_sclk_pt1, drive_dap5_fs_pu0,
+                          drive_dap5_din_pt7, drive_dap5_dout_pt6,
+                          drive_dap5_sclk_pt5, drive_dap6_fs_pa3,
+                          drive_dap6_din_pa2, drive_dap6_dout_pa1,
+                          drive_dap6_sclk_pa0, drive_dap4_fs_pa7,
+                          drive_dap4_din_pa6, drive_dap4_dout_pa5,
+                          drive_dap4_sclk_pa4, drive_extperiph2_clk_pp1,
+                          drive_extperiph1_clk_pp0, drive_cam_i2c_sda_pp3,
+                          drive_cam_i2c_scl_pp2, drive_soc_gpio40_pq4,
+                          drive_soc_gpio41_pq5, drive_soc_gpio42_pq6,
+                          drive_soc_gpio43_pq7, drive_soc_gpio44_pr0,
+                          drive_soc_gpio45_pr1, drive_soc_gpio20_pq0,
+                          drive_soc_gpio21_pq1, drive_soc_gpio22_pq2,
+                          drive_soc_gpio23_pq3, drive_soc_gpio04_pp4,
+                          drive_soc_gpio05_pp5, drive_soc_gpio06_pp6,
+                          drive_soc_gpio07_pp7, drive_uart1_cts_pr5,
+                          drive_uart1_rts_pr4, drive_uart1_rx_pr3,
+                          drive_uart1_tx_pr2, drive_dap2_din_pi1,
+                          drive_dap2_dout_pi0, drive_dap2_fs_pi2,
+                          drive_dap2_sclk_ph7, drive_uart4_cts_ph6,
+                          drive_uart4_rts_ph5, drive_uart4_rx_ph4,
+                          drive_uart4_tx_ph3, drive_soc_gpio03_pg3,
+                          drive_soc_gpio02_pg2, drive_soc_gpio01_pg1,
+                          drive_soc_gpio00_pg0, drive_gen1_i2c_scl_pi3,
+                          drive_gen1_i2c_sda_pi4, drive_soc_gpio08_pg4,
+                          drive_soc_gpio09_pg5, drive_soc_gpio10_pg6,
+                          drive_soc_gpio11_pg7, drive_soc_gpio12_ph0,
+                          drive_soc_gpio13_ph1, drive_soc_gpio14_ph2,
+                          drive_soc_gpio50_pm5, drive_soc_gpio51_pm6,
+                          drive_soc_gpio52_pm7, drive_soc_gpio53_pn0,
+                          drive_soc_gpio54_pn1, drive_soc_gpio55_pn2,
+                          drive_dp_aux_ch0_hpd_pm0, drive_dp_aux_ch1_hpd_pm1,
+                          drive_dp_aux_ch2_hpd_pm2, drive_dp_aux_ch3_hpd_pm3,
+                          drive_hdmi_cec_pm4, drive_pex_l2_clkreq_n_pk4,
+                          drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+                          drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+                          drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+                          drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+                          drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+                          drive_sata_dev_slp_pl3, drive_pex_l5_clkreq_n_pgg0,
+                          drive_pex_l5_rst_n_pgg1, drive_cpu_pwr_req_1_pb1,
+                          drive_cpu_pwr_req_0_pb0, drive_sdmmc1_clk_pj0,
+                          drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+                          drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+                          drive_sdmmc1_dat0_pj2, drive_sdmmc3_dat3_po5,
+                          drive_sdmmc3_dat2_po4, drive_sdmmc3_dat1_po3,
+                          drive_sdmmc3_dat0_po2, drive_sdmmc3_cmd_po1,
+                          drive_sdmmc3_clk_po0, drive_gpu_pwr_req_px0,
+                          drive_spi3_miso_py1, drive_spi1_cs0_pz6,
+                          drive_spi3_cs0_py3, drive_spi1_miso_pz4,
+                          drive_spi3_cs1_py4, drive_gp_pwm3_px3,
+                          drive_gp_pwm2_px2, drive_spi1_sck_pz3,
+                          drive_spi3_sck_py0, drive_spi1_cs1_pz7,
+                          drive_spi1_mosi_pz5, drive_spi3_mosi_py2,
+                          drive_cv_pwr_req_px1, drive_uart2_tx_px4,
+                          drive_uart2_rx_px5, drive_uart2_rts_px6,
+                          drive_uart2_cts_px7, drive_uart5_rx_py6,
+                          drive_uart5_tx_py5, drive_uart5_rts_py7,
+                          drive_uart5_cts_pz0, drive_usb_vbus_en0_pz1,
+                          drive_usb_vbus_en1_pz2, drive_ufs0_rst_pff1,
+                          drive_ufs0_ref_clk_pff0 ]
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-pinmux-aon
+    then:
+      patternProperties:
+        "^pinmux(-[a-z0-9-_]+)?$":
+          type: object
+          additionalProperties:
+            properties:
+              nvidia,pins:
+                items:
+                  enum: [ can1_dout_paa0, can1_din_paa1, can0_dout_paa2,
+                          can0_din_paa3, can0_stb_paa4, can0_en_paa5,
+                          can0_wake_paa6, can0_err_paa7, can1_stb_pbb0,
+                          can1_en_pbb1, can1_wake_pbb2, can1_err_pbb3,
+                          spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+                          spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+                          uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+                          gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+                          safe_state_pee0, vcomp_alert_pee1,
+                          ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+                          pwr_i2c_scl_pee5, pwr_i2c_sda_pee6, sys_reset_n,
+                          shutdown_n, pmu_int_n, soc_pwr_req, clk_32k_in,
+                          # drive groups
+                          drive_shutdown_n, drive_pmu_int_n,
+                          drive_safe_state_pee0, drive_vcomp_alert_pee1,
+                          drive_soc_pwr_req, drive_batt_oc_pee3,
+                          drive_clk_32k_in, drive_power_on_pee4,
+                          drive_pwr_i2c_scl_pee5, drive_pwr_i2c_sda_pee6,
+                          drive_ao_retention_n_pee2, drive_touch_clk_pcc4,
+                          drive_uart3_rx_pcc6, drive_uart3_tx_pcc5,
+                          drive_gen8_i2c_sda_pdd2, drive_gen8_i2c_scl_pdd1,
+                          drive_spi2_mosi_pcc2, drive_gen2_i2c_scl_pcc7,
+                          drive_spi2_cs0_pcc3, drive_gen2_i2c_sda_pdd0,
+                          drive_spi2_sck_pcc0, drive_spi2_miso_pcc1,
+                          drive_can1_dout_paa0, drive_can1_din_paa1,
+                          drive_can0_dout_paa2, drive_can0_din_paa3,
+                          drive_can0_stb_paa4, drive_can0_en_paa5,
+                          drive_can0_wake_paa6, drive_can0_err_paa7,
+                          drive_can1_stb_pbb0, drive_can1_en_pbb1,
+                          drive_can1_wake_pbb2, drive_can1_err_pbb3 ]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@2430000 {
+        compatible = "nvidia,tegra194-pinmux";
+        reg = <0x2430000 0x17000>;
+
+        pinctrl-names = "pex_rst";
+        pinctrl-0 = <&pex_rst_c5_out_state>;
+
+        pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+            pex_rst {
+                nvidia,pins = "pex_l5_rst_n_pgg1";
+                nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.txt
deleted file mode 100644
index 3c8ce28baa..0000000000
--- a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.txt
+++ /dev/null
@@ -1,143 +0,0 @@
-NVIDIA Tegra20 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra20-pinmux"
-- reg: Should contain the register physical address and length for each of
-  the tri-state, mux, pull-up/down, and pad control register sets.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function or tristate parameter. For this
-reason, even seemingly boolean values are actually tristates in this binding:
-unspecified, off, or on. Unspecified is represented as an absent property,
-and off/on are represented as integer values 0 and 1.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
-    group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
-  pin or group. Valid values for function names are listed below. See the Tegra
-  TRM to determine which are valid for each pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
-    0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
-    0: drive, 1: tristate.
-- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
-    0: no, 1: yes.
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
-    0: no, 1: yes.
-- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
-    most power. Controls the drive power or current. See "Low Power Mode"
-    or "LPMD1" and "LPMD0" in the Tegra TRM.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
-    Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
-    Tegra TRM.
-- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVDN_SLWR" in the Tegra TRM.
-- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVUP_SLWF" in the Tegra TRM.
-
-Note that many of these properties are only valid for certain specific pins
-or groups. See the Tegra TRM and various pinmux spreadsheets for complete
-details regarding which groups support which functionality. The Linux pinctrl
-driver may also be a useful reference, since it consolidates, disambiguates,
-and corrects data from all those sources.
-
-Valid values for pin and group names are:
-
-  mux groups:
-
-    These all support nvidia,function, nvidia,tristate, and many support
-    nvidia,pull.
-
-    ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
-    ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
-    gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
-    ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
-    ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
-    lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
-    owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
-    spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
-    uca, ucb, uda.
-
-  tristate groups:
-
-    These only support nvidia,pull.
-
-    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
-    ld19_18, ld21_20, ld23_22.
-
-  drive groups:
-
-    With some exceptions, these support nvidia,high-speed-mode,
-    nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
-    nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
-
-    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
-    drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
-    drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
-    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
-    drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
-    drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
-    drive_uda.
-
-Valid values for nvidia,functions are:
-
-  ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5,
-  displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int,
-  hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand,
-  osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3,
-  pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck,
-  sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt,
-  spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
-  vi, vi_sensor_clk, xio
-
-Example:
-
-	pinctrl@70000000 {
-		compatible = "nvidia,tegra20-pinmux";
-		reg = < 0x70000014 0x10    /* Tri-state registers */
-			0x70000080 0x20    /* Mux registers */
-			0x700000a0 0x14    /* Pull-up/down registers */
-			0x70000868 0xa8 >; /* Pad control registers */
-	};
-
-Example board file extract:
-
-	pinctrl@70000000 {
-		sdio4_default: sdio4_default {
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	sdhci@c8000600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdio4_default>;
-	};
diff --git a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml
new file mode 100644
index 0000000000..432ea40209
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-pinmux
+
+  reg:
+    items:
+      - description: tri-state registers
+      - description: mux register
+      - description: pull-up/down registers
+      - description: pad control registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1,
+                    dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma,
+                    gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx,
+                    irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1,
+                    ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12,
+                    ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2,
+                    lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck,
+                    lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb,
+                    sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia,
+                    spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac,
+                    uad, uca, ucb, uda,
+                    # tristate groups
+                    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls,
+                    lc, ld17_0, ld19_18, ld21_20, ld23_22,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1,
+                    drive_cdev2, drive_csus, drive_dap1, drive_dap2,
+                    drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2,
+                    drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+                    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2,
+                    drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk,
+                    drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb,
+                    drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ]
+
+        nvidia,function:
+          enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4,
+                  dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi,
+                  gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio,
+                  mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1,
+                  pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr,
+                  pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2,
+                  sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3,
+                  spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
+                  vi, vi_sensor_clk, xio ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@70000000 {
+        compatible = "nvidia,tegra20-pinmux";
+        reg = <0x70000014 0x10>, /* Tri-state registers */
+              <0x70000080 0x20>, /* Mux registers */
+              <0x700000a0 0x14>, /* Pull-up/down registers */
+              <0x70000868 0xa8>; /* Pad control registers */
+
+        pinmux {
+            atb {
+                nvidia,pins = "atb", "gma", "gme";
+                nvidia,function = "sdio4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.txt
deleted file mode 100644
index 85f211436b..0000000000
--- a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.txt
+++ /dev/null
@@ -1,166 +0,0 @@
-NVIDIA Tegra210 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra210-pinmux"
-- reg: Should contain a list of base address and size pairs for:
-  - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
-  - second entry: The PINMUX_AUX_* registers (pinmux)
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function or tristate parameter. For this
-reason, even seemingly boolean values are actually tristates in this binding:
-unspecified, off, or on. Unspecified is represented as an absent property,
-and off/on are represented as integer values 0 and 1.
-
-See the TRM to determine which properties and values apply to each pin/group.
-Macro values for property values are defined in
-include/dt-binding/pinctrl/pinctrl-tegra.h.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
-    group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
-    pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
-    0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
-    0: drive, 1: tristate.
-- nvidia,enable-input: Integer. Enable the pin's input path.
-    enable :TEGRA_PIN_ENABLE and
-    disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,io-hv: Integer. Select high-voltage receivers.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,drive-type: Integer. Valid range 0...3.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
-    Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
-    Tegra TRM.
-- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVDN_SLWR" in the Tegra TRM.
-- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVUP_SLWF" in the Tegra TRM.
-
-Valid values for pin and group names (nvidia,pin) are:
-
-  Mux groups:
-
-    These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property
-    that exists in those registers may be set for the following pin names.
-
-    In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL
-    register. Where that is true, and property that exists in that register
-    may also be set on the following pin names.
-
-    als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7,
-    aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1,
-    button_power_on_px5, button_slide_sw_py0, button_vol_down_px7,
-    button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1,
-    cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6,
-    cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in,
-    clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
-    dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3,
-    dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4,
-    dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3,
-    dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
-    gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3,
-    gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4,
-    gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck,
-    lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2,
-    lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1,
-    pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
-    pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2,
-    pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4,
-    pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
-    qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
-    sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5,
-    sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0,
-    sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
-    sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3,
-    spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7,
-    spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6,
-    spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
-    touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1,
-    uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0,
-    uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7,
-    uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
-    usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2
-
-  Drive groups:
-
-    These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control)
-    registers. Note that where one of these registers controls a single pin
-    for which a PINMUX_AUX_* exists, see the list above for the pin name to
-    use when configuring the pinmux.
-
-    pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
-    pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4
-
-Valid values for nvidia,functions are:
-
-    aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb,
-    dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi,
-    i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0,
-    pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
-    sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4,
-    sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4,
-    vgp5, vgp6, vimclk, vimclk2
-
-Example:
-
-	pinmux: pinmux@70000800 {
-		compatible = "nvidia,tegra210-pinmux";
-		reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */
-		      <0x0 0x70003000 0x0 0x1000>; /* Mux registers */
-
-		pinctrl-names = "boot";
-		pinctrl-0 = <&state_boot>;
-
-		state_boot: pinmux {
-			gen1_i2c_scl_pj1 {
-				nvidia,pins = "gen1_i2c_scl_pj1",
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml
new file mode 100644
index 0000000000..28ae2e6d0c
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra210-pinmux
+
+  reg:
+    items:
+      - description: APB_MISC_GP_*_PADCTRL register (pad control)
+      - description: PINMUX_AUX_* registers (pinmux)
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3,
+                    ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4,
+                    bt_wake_ap_ph5, button_home_py1, button_power_on_px5,
+                    button_slide_sw_py0, button_vol_down_px7,
+                    button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7,
+                    cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0,
+                    cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2,
+                    cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5,
+                    clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
+                    dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2,
+                    dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5,
+                    dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0,
+                    dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4,
+                    dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
+                    gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2,
+                    gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1,
+                    gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2,
+                    gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1,
+                    jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3,
+                    lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0,
+                    motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6,
+                    pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
+                    pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6,
+                    pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
+                    pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2,
+                    pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
+                    qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
+                    sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1,
+                    sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3,
+                    sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1,
+                    sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
+                    sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2,
+                    spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0,
+                    spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5,
+                    spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0,
+                    spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
+                    touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2,
+                    uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2,
+                    uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3,
+                    uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6,
+                    uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
+                    usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1,
+                    wifi_wake_ap_ph2,
+                    # drive groups
+                    drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6,
+                    drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4,
+                    drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1,
+                    drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4,
+                    drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3,
+                    drive_sdmmc4 ]
+
+        nvidia,function:
+          enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya,
+                  displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1,
+                  i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b,
+                  i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0,
+                  pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
+                  sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2,
+                  spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd,
+                  usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux: pinmux@70000800 {
+        compatible = "nvidia,tegra210-pinmux";
+        reg = <0x700008d4 0x02a8>, /* Pad control registers */
+              <0x70003000 0x1000>; /* Mux registers */
+
+        pinctrl-names = "boot";
+        pinctrl-0 = <&state_boot>;
+
+        state_boot: pinmux {
+            gen1_i2c_scl_pj1 {
+                nvidia,pins = "gen1_i2c_scl_pj1";
+                nvidia,function = "i2c1";
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+                nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.txt
deleted file mode 100644
index 0e6354c11e..0000000000
--- a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-NVIDIA Tegra30 pinmux controller
-
-The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
-as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
-that binding as a baseline, and only documents the differences between the
-two bindings.
-
-Required properties:
-- compatible: "nvidia,tegra30-pinmux"
-- reg: Should contain the register physical address and length for each of
-  the pad control and mux registers.
-
-Tegra30 adds the following optional properties for pin configuration subnodes:
-- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
-- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset. 0: no, 1: yes.
-- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
-
-As with Tegra20, see the Tegra TRM for complete details regarding which groups
-support which functionality.
-
-Valid values for pin and group names are:
-
-  per-pin mux groups:
-
-    These all support nvidia,function, nvidia,tristate, nvidia,pull,
-    nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
-    nvidia,io-reset.
-
-    clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
-    dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
-    gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
-    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
-    uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
-    lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
-    sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
-    lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
-    lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
-    lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
-    gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
-    gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
-    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
-    gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
-    gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
-    gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
-    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
-    gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
-    vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
-    vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
-    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
-    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
-    lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
-    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
-    ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
-    dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
-    kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
-    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
-    kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
-    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
-    kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
-    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
-    sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
-    pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
-    lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
-    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
-    spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
-    spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
-    sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
-    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
-    sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
-    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
-    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
-    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
-    cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
-    clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
-    pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
-    pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
-    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
-    clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
-    pwr_int_n.
-
-  drive groups:
-
-    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
-    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
-
-    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
-    dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
-    gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
-    uart3, uda, vi1.
-
-Valid values for nvidia,functions are:
-
-  blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt,
-  dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2,
-  extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3,
-  i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand,
-  nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
-  rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1,
-  spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta,
-  uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
-  vi, vi_alt1, vi_alt2, vi_alt3
-
-Example:
-
-	pinctrl@70000000 {
-		compatible = "nvidia,tegra30-pinmux";
-		reg = < 0x70000868 0xd0     /* Pad control registers */
-			0x70003000 0x3e0 >; /* Mux registers */
-	};
-
-Example board file extract:
-
-	pinctrl@70000000 {
-		sdmmc4_default: pinmux {
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	sdhci@78000400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc4_default>;
-	};
diff --git a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml
new file mode 100644
index 0000000000..c0eda78487
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra30-pinmux
+
+  reg:
+    items:
+      - description: pad control registers
+      - description: mux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2,
+                    dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6,
+                    sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2,
+                    lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+                    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0,
+                    lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3,
+                    gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6,
+                    gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1,
+                    lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5,
+                    vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1,
+                    lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6,
+                    lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2,
+                    lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6,
+                    lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+                    gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+                    gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+                    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+                    gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2,
+                    gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6,
+                    gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2,
+                    lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+                    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1,
+                    gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5,
+                    spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2,
+                    vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7,
+                    lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+                    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7,
+                    dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3,
+                    lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7,
+                    ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+                    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5,
+                    ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5,
+                    dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1,
+                    kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+                    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1,
+                    kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5,
+                    kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1,
+                    kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5,
+                    kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+                    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5,
+                    gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4,
+                    ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0,
+                    lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+                    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0,
+                    spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4,
+                    spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0,
+                    ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4,
+                    sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+                    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3,
+                    lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6,
+                    pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1,
+                    sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+                    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3,
+                    sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6,
+                    pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0,
+                    pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3,
+                    pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+                    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0,
+                    clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in,
+                    core_pwr_req, cpu_pwr_req, owr, pwr_int_n,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec,
+                    drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3,
+                    drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma,
+                    drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2,
+                    drive_owr, drive_sdio1, drive_sdio2, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_uda, drive_vi1 ]
+
+        nvidia,function:
+          enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req,
+                  cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv,
+                  extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp,
+                  hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2,
+                  i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie,
+                  pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3,
+                  rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif,
+                  spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test,
+                  trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2,
+                  vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    pinctrl@70000000 {
+        compatible = "nvidia,tegra30-pinmux";
+        reg = <0x70000868 0x0d0>, /* Pad control registers */
+              <0x70003000 0x3e0>; /* Mux registers */
+
+        pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4",
+                              "sdmmc4_rst_n_pcc3";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <2>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/pincfg-node.yaml b/dts/Bindings/pinctrl/pincfg-node.yaml
index f5a121311f..be81ed22a0 100644
--- a/dts/Bindings/pinctrl/pincfg-node.yaml
+++ b/dts/Bindings/pinctrl/pincfg-node.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/pincfg-node.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic pin configuration node schema
+title: Generic Pin Configuration Node
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/dts/Bindings/pinctrl/pinctrl-sx150x.txt b/dts/Bindings/pinctrl/pinctrl-sx150x.txt
deleted file mode 100644
index 4023bad2fe..0000000000
--- a/dts/Bindings/pinctrl/pinctrl-sx150x.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-SEMTECH SX150x GPIO expander bindings
-
-Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
-../interrupt-controller/interrupts.txt for generic information regarding
-pin controller, GPIO, and interrupt bindings.
-
-Required properties:
-- compatible: should be one of :
-			"semtech,sx1501q",
-			"semtech,sx1502q",
-			"semtech,sx1503q",
-			"semtech,sx1504q",
-			"semtech,sx1505q",
-			"semtech,sx1506q",
-			"semtech,sx1507q",
-			"semtech,sx1508q",
-			"semtech,sx1509q".
-
-- reg: The I2C slave address for this device.
-
-- #gpio-cells: Should be 2. The first cell is the GPIO number and the
-		second cell is used to specify optional parameters:
-		bit 0: polarity (0: normal, 1: inverted)
-
-- gpio-controller: Marks the device as a GPIO controller.
-
-Optional properties :
-- interrupts: Interrupt specifier for the controllers interrupt.
-
-- interrupt-controller: Marks the device as a interrupt controller.
-
-- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe,
-		only for sx1507q, sx1508q and sx1509q
-
-The GPIO expander can optionally be used as an interrupt controller, in
-which case it uses the default two cell specifier.
-
-Required properties for pin configuration sub-nodes:
- - pins: List of pins to which the configuration applies.
-
-Optional properties for pin configuration sub-nodes:
-----------------------------------------------------
- - bias-disable: disable any pin bias, except the OSCIO pin
- - bias-pull-up: pull up the pin, except the OSCIO pin
- - bias-pull-down: pull down the pin, except the OSCIO pin
- - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin
- - drive-push-pull: drive actively high and low
- - drive-open-drain: drive with open drain only for sx1507q, sx1508q and sx1509q and except the OSCIO pin
- - output-low: set the pin to output mode with low level
- - output-high: set the pin to output mode with high level
-
-Example:
-
-	i2c0gpio-expander@20{
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "semtech,sx1506q";
-		reg = <0x20>;
-		interrupt-parent = <&gpio_1>;
-		interrupts = <16 0>;
-
-		gpio-controller;
-		interrupt-controller;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio1_cfg_pins>;
-
-		gpio1_cfg_pins: gpio1-cfg {
-			pins = "gpio1";
-			bias-pull-up;
-		};
-	};
diff --git a/dts/Bindings/pinctrl/pinmux-node.yaml b/dts/Bindings/pinctrl/pinmux-node.yaml
index 551df3d9b8..008c3ab7f1 100644
--- a/dts/Bindings/pinctrl/pinmux-node.yaml
+++ b/dts/Bindings/pinctrl/pinmux-node.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/pinmux-node.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic pin multiplexing node schema
+title: Generic Pin Multiplexing Node
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 931e5c190e..93f231c7a3 100644
--- a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -7,11 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. IPQ6018 TLMM block
 
 maintainers:
-  - Sricharan R <sricharan@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  IPQ6018 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ6018 SoC.
 
 properties:
   compatible:
@@ -20,36 +19,28 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
 
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pinmux$':
-    type: object
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq6018-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq6018-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq6018-tlmm-state:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -63,7 +54,7 @@ patternProperties:
                       sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
                       qdsd_data3 ]
         minItems: 1
-        maxItems: 4
+        maxItems: 16
 
       function:
         description:
@@ -72,12 +63,12 @@ patternProperties:
         enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
                 atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
                 atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
-                atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
-                blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
+                atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp0_i2c, blsp1_i2c,
+                blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp0_spi, blsp1_spi,
                 blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
                 blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
                 blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
-                blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
+                blsp0_uart, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
                 cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
                 cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
                 dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
@@ -92,64 +83,48 @@ patternProperties:
                 qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
                 qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
                 qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
-                qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
-                sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
-                uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
-
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
+                qdss_tracedata_a, qdss_tracedata_b, qpic_pad, reset_n, sd_card,
+                sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2,
+                uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
 
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@1000000 {
-              compatible = "qcom,ipq6018-pinctrl";
-              reg = <0x01000000 0x300000>;
-              interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-              interrupt-controller;
-              #interrupt-cells = <2>;
-              gpio-controller;
-              #gpio-cells = <2>;
-              gpio-ranges = <&tlmm 0 0 80>;
-
-              serial3-pinmux {
-                      pins = "gpio44", "gpio45";
-                      function = "blsp2_uart";
-                      drive-strength = <8>;
-                      bias-pull-down;
-              };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq6018-pinctrl";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 80>;
+
+        serial3-state {
+            pins = "gpio44", "gpio45";
+            function = "blsp2_uart";
+            drive-strength = <8>;
+            bias-pull-down;
         };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt
deleted file mode 100644
index 7b151894f5..0000000000
--- a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt
+++ /dev/null
@@ -1,181 +0,0 @@
-Qualcomm Technologies, Inc. IPQ8074 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-IPQ8074 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,ipq8074-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio0-gpio69
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-		    atest_char, atest_char0, atest_char1, atest_char2,
-		    atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
-		    audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
-		    audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
-		    blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
-		    blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
-		    blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
-		    blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
-		    blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1,
-		    cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en,
-		    ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0,
-		    mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc,
-		    mdio, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk,
-		    pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync,
-		    pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1,
-		    pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
-		    qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
-		    qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
-		    qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
-		    qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
-		    qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
-		    qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b,
-		    qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a,
-		    wci2b, wci2c, wci2d
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@1000000 {
-		compatible = "qcom,ipq8074-pinctrl";
-		reg = <0x1000000 0x300000>;
-		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 70>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		uart2: uart2-default {
-			mux {
-				pins = "gpio23", "gpio24";
-				function = "blsp4_uart1";
-			};
-
-			rx {
-				pins = "gpio23";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			tx {
-				pins = "gpio24";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
new file mode 100644
index 0000000000..5687acaf19
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ8074 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq8074-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 35
+
+  gpio-line-names:
+    maxItems: 70
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq8074-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq8074-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq8074-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-6][0-9]|70)$"
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
+                audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
+                audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
+                blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
+                blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
+                blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
+                blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
+                blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0,
+                cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0,
+                led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2,
+                mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst,
+                pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx,
+                pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0,
+                pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
+                qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
+                tsens_max, wci2a, wci2b, wci2c, wci2d ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq8074-pinctrl";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&tlmm 0 0 70>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <0x2>;
+
+        serial4-state {
+            pins = "gpio23", "gpio24";
+            function = "blsp4_uart1";
+            drive-strength = <8>;
+            bias-disable;
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml
index f7bd4be173..a0a12171b6 100644
--- a/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. MDM9607 TLMM block
@@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. MDM9607 TLMM block
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  MDM9607 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -26,10 +24,10 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -40,20 +38,20 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-mdm9607-tlmm-state"
       - patternProperties:
           ".*":
             $ref: "#/$defs/qcom-mdm9607-tlmm-state"
 
-'$defs':
+$defs:
   qcom-mdm9607-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -115,20 +113,19 @@ patternProperties:
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@1000000 {
-          compatible = "qcom,mdm9607-tlmm";
-          reg = <0x01000000 0x300000>;
-          interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-          gpio-controller;
-          gpio-ranges = <&msmgpio 0 0 80>;
-          #gpio-cells = <2>;
-          interrupt-controller;
-          #interrupt-cells = <2>;
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,mdm9607-tlmm";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&msmgpio 0 0 80>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt
deleted file mode 100644
index d469739688..0000000000
--- a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt
+++ /dev/null
@@ -1,161 +0,0 @@
-Qualcomm MDM9615 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MDM9615 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,mdm9615-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio0-gpio87
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins.
-		    Valid values are:
-		    gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
-		    sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio,
-		    cdc_mclk
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	msmgpio: pinctrl@800000 {
-		compatible = "qcom,mdm9615-pinctrl";
-		reg = <0x800000 0x4000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&msmgpio 0 0 88>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 16 0x4>;
-
-		gsbi8_uart: gsbi8-uart {
-			mux {
-				pins = "gpio34", "gpio35";
-				function = "gsbi8";
-			};
-
-			tx {
-				pins = "gpio34";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio35";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
new file mode 100644
index 0000000000..a4f6e4c588
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MDM9615 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC.
+
+$ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,mdm9615-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  '#gpio-cells': true
+  gpio-ranges: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
+        additionalProperties: false
+
+$defs:
+  qcom-mdm9615-pinctrl-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$"
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
+                sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      output-high: true
+      output-low: true
+      input-enable: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+      compatible = "qcom,mdm9615-pinctrl";
+      reg = <0x01000000 0x300000>;
+      interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+      gpio-controller;
+      gpio-ranges = <&msmgpio 0 0 88>;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      gsbi3-state {
+        pins = "gpio8", "gpio9", "gpio10", "gpio11";
+        function = "gsbi3";
+        drive-strength = <8>;
+        bias-disable;
+      };
+
+      gsbi5-i2c-state {
+        sda-pins {
+          pins = "gpio16";
+          function = "gsbi5_i2c";
+          drive-strength = <8>;
+          bias-disable;
+        };
+
+        scl-pins {
+          pins = "gpio17";
+          function = "gsbi5_i2c";
+          drive-strength = <2>;
+          bias-disable;
+        };
+      };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index ab4a2b4cfd..3b79f5be86 100644
--- a/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8226 TLMM block
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  MSM8226 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8226 SoC.
 
 properties:
   compatible:
@@ -21,38 +20,32 @@ properties:
     description: Specifies the base address and size of the TLMM register space
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description: Specifies the PIN numbers and Flags, as defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
+  "#gpio-cells": true
+  gpio-ranges: true
 
   gpio-reserved-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8226-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8226-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8226-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -71,65 +64,51 @@ patternProperties:
           Specify the alternative function to be configured for the specified
           pins. Functions are only valid for gpio pins.
         enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
-                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1,
                 blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
-                blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
-
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
+                blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3,
+                wlan ]
 
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
+      input-enable: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        msmgpio: pinctrl@fd510000 {
-                compatible = "qcom,msm8226-pinctrl";
-                reg = <0xfd510000 0x4000>;
-
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&msmgpio 0 0 117>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-                serial-pins {
-                        pins = "gpio8", "gpio9";
-                        function = "blsp_uart3";
-                        drive-strength = <8>;
-                        bias-disable;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    msmgpio: pinctrl@fd510000 {
+        compatible = "qcom,msm8226-pinctrl";
+        reg = <0xfd510000 0x4000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&msmgpio 0 0 117>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        serial-state {
+            pins = "gpio8", "gpio9";
+            function = "blsp_uart3";
+            drive-strength = <8>;
+            bias-disable;
         };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.txt
deleted file mode 100644
index f095209848..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.txt
+++ /dev/null
@@ -1,96 +0,0 @@
-Qualcomm MSM8660 TLMM block
-
-Required properties:
-- compatible: "qcom,msm8660-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-                The first cell is the gpio pin number and the
-                second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Qualcomm's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
- output-low, output-high.
-
-Non-empty subnodes must specify the 'pins' property.
-
-Valid values for pins are:
-  gpio0-gpio172, sdc3_clk, sdc3_cmd, sdc3_data sdc4_clk, sdc4_cmd, sdc4_data
-
-Valid values for function are:
-  gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, gp_clk_1b,
-  gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n,
-  gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
-  gsbi2_spi_cs3_n, gsbi3, gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n,
-  gsbi4, gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, hdmi, i2s,
-  lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, sdc5, tsif1, tsif2, usb_fs1,
-  usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs
-
-Example:
-
-	msmgpio: pinctrl@800000 {
-		compatible = "qcom,msm8660-pinctrl";
-		reg = <0x800000 0x4000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&msmgpio 0 0 173>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 16 0x4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gsbi12_uart>;
-
-		gsbi12_uart: gsbi12-uart {
-			mux {
-				pins = "gpio117", "gpio118";
-				function = "gsbi12";
-			};
-
-			tx {
-				pins = "gpio118";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio117";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml
new file mode 100644
index 0000000000..ad0cad4694
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8660-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8660 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8660-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 86
+
+  gpio-line-names:
+    maxItems: 173
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8660-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8660-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8660-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-2])$"
+            - enum: [ sdc3_clk, sdc3_cmd, sdc3_data, sdc4_clk, sdc4_cmd, sdc4_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+                gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n,
+                gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2,
+                gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, gsbi2_spi_cs3_n, gsbi3,
+                gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, gsbi4,
+                gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12,
+                hdmi, i2s, lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2,
+                sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2,
+                usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ]
+
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@800000 {
+        compatible = "qcom,msm8660-pinctrl";
+        reg = <0x800000 0x4000>;
+
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 173>;
+        #gpio-cells = <2>;
+        interrupts = <0 16 0x4>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gsbi3-i2c-state {
+            pins = "gpio43", "gpio44";
+            function = "gsbi3";
+            drive-strength = <8>;
+            bias-disable;
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml b/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml
index e035300914..cc6d0c9c51 100644
--- a/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ b/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -10,8 +10,7 @@ maintainers:
   - Stephan Gerhold <stephan@gerhold.net>
 
 description: |
-  This binding describes the Top Level Mode Multiplexer (TLMM) block found
-  in the MSM8909 platform.
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC.
 
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
@@ -25,10 +24,10 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -39,12 +38,13 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-msm8909-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-msm8909-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-msm8909-tlmm-state:
@@ -52,7 +52,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -112,41 +112,40 @@ $defs:
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-        pinctrl@1000000 {
-                compatible = "qcom,msm8909-tlmm";
-                reg = <0x1000000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 117>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx {
-                                pins = "gpio4";
-                                function = "blsp_uart1";
-                                bias-pull-up;
-                        };
-
-                        tx {
-                                pins = "gpio5";
-                                function = "blsp_uart1";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@1000000 {
+        compatible = "qcom,msm8909-tlmm";
+        reg = <0x1000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 117>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
 ...
diff --git a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt
deleted file mode 100644
index 3354a63296..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt
+++ /dev/null
@@ -1,195 +0,0 @@
-Qualcomm MSM8916 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8916 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,msm8916-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio0-gpio121,
-		    sdc1_clk,
-		    sdc1_cmd,
-		    sdc1_data
-		    sdc2_clk,
-		    sdc2_cmd,
-		    sdc2_data,
-		    qdsd_cmd,
-		    qdsd_data0,
-		    qdsd_data1,
-		    qdsd_data2,
-		    qdsd_data3
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-	adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
-	atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0,
-	atest_gpsadc1, atest_tsens, atest_wlan0, atest_wlan1, backlight_en,
-	bimc_dte0,bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
-	blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2,
-	blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3,
-	blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4,
-	blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2,
-	cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c,
-	cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out,
-	display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us,
-	ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
-	gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gsm0_tx1,
-	gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, ldo_en,
-	ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, nav_pps, nav_tsync,
-	pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc,
-	pwr_crypto_enabled_a, pwr_crypto_enabled_b, pwr_modem_enabled_a,
-	pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_nav_enabled_b,
-	qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, qdss_ctitrig_in_b0,
-	qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1,
-	qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a,
-	qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
-	qdss_tracedata_b, reset_n, sd_card, sd_write, sec_mi2s, smb_int,
-	ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm,
-	wcss_wlan, webcam1_rst
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@1000000 {
-		compatible = "qcom,msm8916-pinctrl";
-		reg = <0x1000000 0x300000>;
-		interrupts = <0 208 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 122>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		uart2: uart2-default {
-			mux {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-			};
-
-			tx {
-				pins = "gpio4";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio5";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml
new file mode 100644
index 0000000000..5495f58905
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8916-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8916-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 61
+
+  gpio-line-names:
+    maxItems: 122
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8916-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8916-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8916-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[01])$"
+            - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
+                atest_char0, atest_char1, atest_char2, atest_char3,
+                atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens,
+                atest_wlan0, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+                blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2,
+                blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2,
+                blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+                blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_uart1,
+                blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, cam1_standby,
+                cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+                cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out,
+                display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc,
+                euro_us, ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b,
+                gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b,
+                gsm0_tx0, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0,
+                kpsns1, kpsns2, ldo_en, ldo_update, mag_int, mdp_vsync,
+                modem_tsync, m_voc, nav_pps, nav_tsync, pa_indicator, pbs0,
+                pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc,
+                pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+                qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+                qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+                qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
+                qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, reset_n,
+                sd_card, sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1,
+                uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan,
+                webcam1_rst ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    msmgpio: pinctrl@1000000 {
+        compatible = "qcom,msm8916-pinctrl";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&msmgpio 0 0 122>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart2-sleep-state {
+            pins = "gpio4", "gpio5";
+            function = "gpio";
+
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+
+        spi1-default-state {
+            spi-pins {
+                pins = "gpio0", "gpio1", "gpio3";
+                function = "blsp_spi1";
+
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            cs-pins {
+                pins = "gpio2";
+                function = "gpio";
+
+                drive-strength = <16>;
+                bias-disable;
+                output-high;
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
index d4da558cde..c9a4a79e8d 100644
--- a/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8953 TLMM block
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  MSM8953 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8953 SoC.
 
 properties:
   compatible:
@@ -20,38 +19,30 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
   gpio-reserved-ranges: true
+  "#gpio-cells": true
+  gpio-ranges: true
 
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8953-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8953-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8953-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -113,60 +104,44 @@ patternProperties:
                 uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
                 wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@1000000 {
-              compatible = "qcom,msm8953-pinctrl";
-              reg = <0x01000000 0x300000>;
-              interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-              interrupt-controller;
-              #interrupt-cells = <2>;
-              gpio-controller;
-              #gpio-cells = <2>;
-              gpio-ranges = <&tlmm 0 0 142>;
-
-              serial_default: serial-pins {
-                    pins = "gpio4", "gpio5";
-                    function = "blsp_uart2";
-                    drive-strength = <2>;
-                    bias-disable;
-              };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,msm8953-pinctrl";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 142>;
+
+        serial_default: serial-state {
+            pins = "gpio4", "gpio5";
+            function = "blsp_uart2";
+            drive-strength = <2>;
+            bias-disable;
         };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
deleted file mode 100644
index a7dd213c77..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-Qualcomm MSM8960 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8960 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,msm8960-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio0-gpio151,
-		    sdc1_clk,
-		    sdc1_cmd,
-		    sdc1_data
-		    sdc3_clk,
-		    sdc3_cmd,
-		    sdc3_data
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-		    audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
-		    codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
-		    gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
-		    gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a,
-		    gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio,
-		    gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
-		    gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
-		    gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
-		    gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
-		    gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10,
-		    gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n,
-		    gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n,
-		    gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data,
-		    hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s,
-		    pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5,
-		    slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps,
-		    ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc,
-		    usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe,
-		    usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b,
-		    vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b,
-		    vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c,
-		    vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a,
-		    vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a,
-		    vfe_camif_timer7_b, vfe_camif_timer7_c, wlan
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	msmgpio: pinctrl@800000 {
-		compatible = "qcom,msm8960-pinctrl";
-		reg = <0x800000 0x4000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&msmgpio 0 0 152>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 16 0x4>;
-
-		gsbi8_uart: gsbi8-uart {
-			mux {
-				pins = "gpio34", "gpio35";
-				function = "gsbi8";
-			};
-
-			tx {
-				pins = "gpio34";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio35";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml
new file mode 100644
index 0000000000..33d07d5312
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8960-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8960 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8960-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 76
+
+  gpio-line-names:
+    maxItems: 152
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8960-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8960-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8960-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-1])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd,
+                      sdc3_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
+                codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
+                gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+                gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, gp_pdm_0b,
+                gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gsbi1,
+                gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
+                gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+                gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
+                gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
+                gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11,
+                gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, gsbi11_spi_cs2a_n,
+                gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, gsbi12, hdmi_cec,
+                hdmi_ddc_clock, hdmi_ddc_data, hdmi_hot_plug_detect, hsic,
+                mdp_vsync, mi2s, mic_i2s, pmb_clk, pmb_ext_ctrl, ps_hold,
+                rpm_wdog, sdc2, sdc4, sdc5, slimbus1, slimbus2, spkr_i2s,
+                ssbi1, ssbi2, ssbi_ext_gps, ssbi_pmic2, ssbi_qpa1, ssbi_ts,
+                tsif1, tsif2, ts_eoc, usb_fs1, usb_fs1_oe, usb_fs1_oe_n,
+                usb_fs2, usb_fs2_oe, usb_fs2_oe_n, vfe_camif_timer1_a,
+                vfe_camif_timer1_b, vfe_camif_timer2, vfe_camif_timer3_a,
+                vfe_camif_timer3_b, vfe_camif_timer4_a, vfe_camif_timer4_b,
+                vfe_camif_timer4_c, vfe_camif_timer5_a, vfe_camif_timer5_b,
+                vfe_camif_timer6_a, vfe_camif_timer6_b, vfe_camif_timer6_c,
+                vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c,
+                wlan ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    msmgpio: pinctrl@800000 {
+        compatible = "qcom,msm8960-pinctrl";
+        reg = <0x800000 0x4000>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&msmgpio 0 0 152>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        spi1-default-state {
+            mosi-pins {
+                pins = "gpio6";
+                function = "gsbi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            miso-pins {
+                pins = "gpio7";
+                function = "gsbi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            cs-pins {
+                pins = "gpio8";
+                function = "gpio";
+                drive-strength = <12>;
+                bias-disable;
+                output-low;
+            };
+
+            clk-pins {
+                pins = "gpio9";
+                function = "gsbi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
deleted file mode 100644
index 0040565066..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-Qualcomm MSM8974 TLMM block
-
-Required properties:
-- compatible: "qcom,msm8974-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-                The first cell is the gpio pin number and the
-                second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Qualcomm's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
-
-Non-empty subnodes must specify the 'pins' property.
-Note that not all properties are valid for all pins.
-
-
-Valid values for pins are:
-  gpio0-gpio145
-    Supports mux, bias and drive-strength
-
-  sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data
-    Supports bias and drive-strength
-
-  hsic_data, hsic_strobe
-    Supports only mux
-
-Valid values for function are:
-  cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm,
-  blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1,
-  blsp_uim2, blsp_uart2, blsp_i2c2, blsp_spi2,
-  blsp_uim3, blsp_uart3, blsp_i2c3, blsp_spi3,
-  blsp_uim4, blsp_uart4, blsp_i2c4, blsp_spi4,
-  blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5,
-  blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6,
-  blsp_uim7, blsp_uart7, blsp_i2c7, blsp_spi7,
-  blsp_uim8, blsp_uart8, blsp_i2c8, blsp_spi8,
-  blsp_uim9, blsp_uart9, blsp_i2c9, blsp_spi9,
-  blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10,
-  blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11,
-  blsp_uim12, blsp_uart12, blsp_i2c12, blsp_spi12,
-  blsp_spi1_cs1, blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2
-  blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
-  sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0, cci_timer1,
-  cci_timer2, cci_timer3, cci_async_in0, cci_async_in1, cci_async_in2,
-  cam_mckl0, cam_mclk1, cam_mclk2, cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc,
-  hdmi_hpd, edp_hpd, gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk,
-  gp_mn, tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s,
-  ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl, gpio
-
-  (Note that this is not yet the complete list of functions)
-
-
-
-Example:
-
-	msmgpio: pinctrl@fd510000 {
-		compatible = "qcom,msm8974-pinctrl";
-		reg = <0xfd510000 0x4000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&msmgpio 0 0 146>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 208 0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2_default>;
-
-		uart2_default: uart2_default {
-			mux {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-			};
-
-			tx {
-				pins = "gpio4";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio5";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml
new file mode 100644
index 0000000000..9287cbbff7
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8974 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8974-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 73
+
+  gpio-line-names:
+    maxItems: 146
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8974-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8974-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8974-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
+            - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm,
+                blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2,
+                blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3,
+                blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4,
+                blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5,
+                blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7,
+                blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8,
+                blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9,
+                blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10,
+                blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12,
+                blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1,
+                blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2
+                blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
+                sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0,
+                cci_timer1, cci_timer2, cci_timer3, cci_async_in0,
+                cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2,
+                cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd,
+                gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn,
+                tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s,
+                spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - if:
+          properties:
+            pins:
+              contains:
+                enum:
+                  - hsic_data
+                  - hsic_strobe
+          required:
+            - pins
+        then:
+          properties:
+            bias-pull-down: false
+            bias-pull-up: false
+            bias-disable: false
+            drive-strength: false
+            input-enable: false
+            output-high: false
+            output-low: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@fd510000 {
+        compatible = "qcom,msm8974-pinctrl";
+        reg = <0xfd510000 0x4000>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 146>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        sdc1-off-state {
+            clk-pins {
+                pins = "sdc1_clk";
+                bias-disable;
+                drive-strength = <2>;
+            };
+
+            cmd-pins {
+                pins = "sdc1_cmd";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
+
+            data-pins {
+                pins = "sdc1_data";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
+        };
+
+        blsp2-uart1-sleep-state {
+            pins = "gpio41", "gpio42", "gpio43", "gpio44";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+
+        hsic-state {
+            pins = "hsic_data", "hsic_strobe";
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.txt
deleted file mode 100644
index 70d04d12f1..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.txt
+++ /dev/null
@@ -1,183 +0,0 @@
-Qualcomm MSM8976 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8956 and MSM8976 platforms.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,msm8976-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio145
-		        Supports mux, bias and drive-strength
-
-		      sdc1_clk, sdc1_cmd, sdc1_data,
-		      sdc2_clk, sdc2_cmd, sdc2_data,
-		      sdc3_clk, sdc3_cmd, sdc3_data
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2,
-		    blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3,
-		    qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b,
-		    blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5,
-		    qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a,
-		    qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b,
-		    blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a,
-		    sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi,
-		    blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a,
-		    uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset,
-		    uim1_present, uim2_data, uim2_clk, uim2_reset,
-		    uim2_present, ts_xvdd, mipi_dsi0, us_euro, ts_resout,
-		    ts_sample, sec_mi2s_mclk_b, pri_mi2s, codec_reset,
-		    cdc_pdm0, us_emitter, pri_mi2s_mclk_b, pri_mi2s_mclk_c,
-		    lpass_slimbus, lpass_slimbus0, lpass_slimbus1, codec_int1,
-		    codec_int2, wcss_bt, sdc3, wcss_wlan2, wcss_wlan1,
-		    wcss_wlan0, wcss_wlan, wcss_fm, key_volp, key_snapshot,
-		    key_focus, key_home, pwr_down, dmic0_clk, hdmi_int,
-		    dmic0_data, wsa_vi, wsa_en, blsp_spi8, wsa_irq, blsp_i2c8,
-		    pa_indicator, modem_tsync, ssbi_wtr1, gsm1_tx, gsm0_tx,
-		    sdcard_det, sec_mi2s, ss_switch,
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@1000000 {
-		compatible = "qcom,msm8976-pinctrl";
-		reg = <0x1000000 0x300000>;
-		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 145>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		blsp1_uart2_active: blsp1_uart2_active {
-			mux {
-				pins = "gpio4", "gpio5", "gpio6", "gpio7";
-				function = "blsp_uart2";
-			};
-
-			config {
-				pins = "gpio4", "gpio5", "gpio6", "gpio7";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml
new file mode 100644
index 0000000000..858f45710f
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8976-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8976 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8976-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 73
+
+  gpio-line-names:
+    maxItems: 145
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8976-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8976-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8976-tlmm-state:
+    type: object
+    description:
+      Desired pin configuration for a device or its specific state (like sleep
+      or active).
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this state.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-4])$"
+            - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2,
+                blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3,
+                qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b,
+                blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5,
+                qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a,
+                qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b,
+                blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a,
+                sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi,
+                blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a,
+                uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset,
+                uim1_present, uim2_data, uim2_clk, uim2_reset, uim2_present,
+                ts_xvdd, mipi_dsi0, us_euro, ts_resout, ts_sample,
+                sec_mi2s_mclk_b, pri_mi2s, codec_reset, cdc_pdm0, us_emitter,
+                pri_mi2s_mclk_b, pri_mi2s_mclk_c, lpass_slimbus,
+                lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2,
+                wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan,
+                wcss_fm, key_volp, key_snapshot, key_focus, key_home, pwr_down,
+                dmic0_clk, hdmi_int, dmic0_data, wsa_vi, wsa_en, blsp_spi8,
+                wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1,
+                gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,msm8976-pinctrl";
+        reg = <0x1000000 0x300000>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 145>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart2-active-state {
+            pins = "gpio4", "gpio5", "gpio6", "gpio7";
+            function = "blsp_uart2";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt
deleted file mode 100644
index da52df6273..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt
+++ /dev/null
@@ -1,186 +0,0 @@
-Qualcomm MSM8994 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8994 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should contain one of:
-		    "qcom,msm8992-pinctrl",
-		    "qcom,msm8994-pinctrl".
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio145
-		        Supports mux, bias and drive-strength
-
-		      sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk,
-		      sdc2_cmd, sdc2_data
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    audio_ref_clk,  blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
-		    blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11,
-		    blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
-		    blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
-		    blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9,
-		    blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11,
-		    blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5,
-		    blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11,
-		    blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
-		    blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
-		    blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b,
-		    blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
-		    cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1,
-		    cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-		    gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
-		    gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
-		    gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, hdmi_rcv,
-		    mdp_vsync, mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a,
-		    qdss_cti_trig_in_b, qdss_cti_trig_in_c, qdss_cti_trig_in_d,
-		    qdss_cti_trig_out_a, qdss_cti_trig_out_b, qdss_cti_trig_out_c,
-		    qdss_cti_trig_out_d, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
-		    qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0,
-		    pci_e1, pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
-		    tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4, gpio
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	msmgpio: pinctrl@fd510000 {
-		compatible = "qcom,msm8994-pinctrl";
-		reg = <0xfd510000 0x4000>;
-		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&msmgpio 0 0 146>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		blsp1_uart2_default: blsp1_uart2_default {
-			pinmux {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-			};
-			pinconf {
-				pins = "gpio4", "gpio5";
-				drive-strength = <16>;
-				bias-disable;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml
new file mode 100644
index 0000000000..55d5439c6c
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8994 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8992-pinctrl
+      - qcom,msm8994-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  gpio-line-names:
+    maxItems: 150
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8994-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8994-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8994-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+                blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1,
+                blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2,
+                blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
+                blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8,
+                blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2,
+                blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+                blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
+                blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
+                blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+                blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
+                blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b,
+                blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1,
+                cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1,
+                cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a,
+                gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
+                gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
+                gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd,
+                hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync,
+                qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c,
+                qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b,
+                qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1,
+                pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
+                tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@fd510000 {
+        compatible = "qcom,msm8994-pinctrl";
+        reg = <0xfd510000 0x4000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 146>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart2-default-state {
+            function = "blsp_uart2";
+            pins = "gpio4", "gpio5";
+            drive-strength = <16>;
+            bias-disable;
+        };
+
+        blsp1-spi1-default-state {
+            default-pins {
+                pins = "gpio0", "gpio1", "gpio3";
+                function = "blsp_spi1";
+                drive-strength = <10>;
+                bias-pull-down;
+            };
+
+            cs-pins {
+                pins = "gpio8";
+                function = "gpio";
+                drive-strength = <2>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt
deleted file mode 100644
index a56cb88283..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt
+++ /dev/null
@@ -1,208 +0,0 @@
-Qualcomm MSM8996 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8996 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,msm8996-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio149
-		        Supports mux, bias and drive-strength
-
-		      sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
-		      sdc2_data sdc1_rclk
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
-		    bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
-		    qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
-		    dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
-		    blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
-		    mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
-		    atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
-		    cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
-		    pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
-		    qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
-		    qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
-		    atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
-		    atest_usb20, atest_char0, dac_calib10, qdss_stm10,
-		    qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
-		    blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
-		    qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
-		    qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
-		    dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
-		    qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
-		    dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
-		    dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
-		    dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
-		    dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
-		    sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
-		    qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
-		    uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
-		    blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
-		    qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
-		    blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
-		    cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
-		    blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
-		    qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
-		    isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
-		    qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
-		    sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
-		    gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
-		    qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
-		    tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
-		    qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
-		    sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
-		    sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
-		    ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
-		    blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
-		    pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
-		    qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
-		    qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
-		    gpio
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@1010000 {
-		compatible = "qcom,msm8996-pinctrl";
-		reg = <0x01010000 0x300000>;
-		interrupts = <0 208 0>;
-		gpio-controller;
-		gpio-ranges = <&tlmm 0 0 150>;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		uart_console_active: uart_console_active {
-			mux {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart8";
-			};
-
-			config {
-				pins = "gpio4", "gpio5";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml
new file mode 100644
index 0000000000..8e1cd4ba11
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8996-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8996-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  gpio-line-names:
+    maxItems: 150
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8996-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8996-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8996-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
+                atest_char, cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
+                qdss_tracedata_b, pll_reset, qdss_stm6, qdss_stm5, qdss_stm4,
+                atest_usb2, cci_i2c, qdss_stm3, dac_calib3, atest_usb23,
+                atest_char3, dac_calib4, qdss_stm2, atest_usb22, atest_char2,
+                qdss_stm1, dac_calib5, atest_usb21, atest_char1, dbg_out,
+                qdss_stm0, dac_calib6, atest_usb20, atest_char0, dac_calib10,
+                qdss_stm10, qdss_cti_trig_in_a, cci_timer4, blsp_spi6,
+                blsp_uart6, blsp_uim6, blsp2_spi, qdss_stm9,
+                qdss_cti_trig_out_a, dac_calib11, qdss_stm8, cci_timer0,
+                qdss_stm13, dac_calib7, cci_timer1, qdss_stm12, dac_calib8,
+                cci_timer2, blsp1_spi, qdss_stm11, dac_calib9, cci_timer3,
+                cci_async, dac_calib12, blsp_i2c6, qdss_tracectl_a,
+                dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15,
+                hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17,
+                hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, dac_calib19,
+                hdmi_hot, dac_calib20, dac_calib21, pci_e0, dac_calib22,
+                dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write,
+                tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti,
+                blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, uim3,
+                blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
+                blsp_uart11, blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a,
+                blsp_i2c11, cri_trng0, cri_trng1, cri_trng, qdss_stm18,
+                pri_mi2s, qdss_stm17, blsp_spi4, blsp_uart4, blsp_uim4,
+                qdss_stm16, qdss_stm15, blsp_i2c4, qdss_stm14, dac_calib26,
+                spkr_i2s, audio_ref, lpass_slimbus, isense_dbg, tsense_pwm1,
+                tsense_pwm2, btfm_slimbus, ter_mi2s, qdss_stm22, qdss_stm21,
+                qdss_stm20, qdss_stm19, gcc_gp1_clk_b, sec_mi2s, blsp_spi5,
+                blsp_uart5, blsp_uim5, gcc_gp2_clk_b, gcc_gp3_clk_b, blsp_i2c5,
+                blsp_spi12, blsp_uart12, blsp_uim12, qdss_stm25, qdss_stm31,
+                blsp_i2c12, qdss_stm30, qdss_stm29, tsif1_clk, qdss_stm28,
+                tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, qdss_traceclk_b,
+                tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, sdc4_clk,
+                qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
+                blsp11_uart_rx_b, blsp11_i2c_sda_b, prng_rosc,
+                blsp11_i2c_scl_b, uim2, uim1, uim_batt, pci_e2, pa_indicator,
+                adsp_ext, ddr_bist, qdss_tracedata_11, qdss_tracedata_12,
+                modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2,
+                ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1010000 {
+        compatible = "qcom,msm8996-pinctrl";
+        reg = <0x01010000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 150>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-spi1-default-state {
+            spi-pins {
+                pins = "gpio0", "gpio1", "gpio3";
+                function = "blsp_spi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            cs-pins {
+                pins = "gpio2";
+                function = "gpio";
+                drive-strength = <16>;
+                bias-disable;
+                output-high;
+            };
+        };
+
+        blsp1-spi1-sleep-state {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt
deleted file mode 100644
index c4de930f24..0000000000
--- a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt
+++ /dev/null
@@ -1,202 +0,0 @@
-Qualcomm MSM8998 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8998 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,msm8998-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio149
-		        Supports mux, bias and drive-strength
-
-		      sdc2_clk, sdc2_cmd, sdc2_data
-		        Supports bias and drive-strength
-
-		      ufs_reset
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0,
-		    atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1,
-		    atest_usb10, atest_usb11, atest_usb12, atest_usb13,
-		    audio_ref, bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a,
-		    blsp10_spi_b, blsp11_i2c, blsp1_spi, blsp1_spi_a,
-		    blsp1_spi_b, blsp2_spi, blsp9_spi, blsp_i2c1, blsp_i2c2,
-		    blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7,
-		    blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
-		    blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
-		    blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
-		    blsp_spi11, blsp_spi12, blsp_uart1_a, blsp_uart1_b,
-		    blsp_uart2_a, blsp_uart2_b, blsp_uart3_a, blsp_uart3_b,
-		    blsp_uart7_a, blsp_uart7_b, blsp_uart8, blsp_uart8_a,
-		    blsp_uart8_b, blsp_uart9_a, blsp_uart9_b, blsp_uim1_a,
-		    blsp_uim1_b, blsp_uim2_a, blsp_uim2_b, blsp_uim3_a,
-		    blsp_uim3_b, blsp_uim7_a, blsp_uim7_b, blsp_uim8_a,
-		    blsp_uim8_b, blsp_uim9_a, blsp_uim9_b, bt_reset,
-		    btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
-		    cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
-		    cri_trng0, cri_trng1, dbg_out, ddr_bist, edp_hot, edp_lcd,
-		    gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, gcc_gp3_a,
-		    gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv,
-		    isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus,
-		    m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
-		    mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte,
-		    nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag,
-		    pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc,
-		    pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b,
-		    qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable,
-		    qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41,
-		    sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu,
-		    spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1,
-		    tsense_pwm1, tsense_pwm2, tsif0, tsif1,
-		    uim1_clk, uim1_data, uim1_present,
-		    uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
-		    uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0,
-		    vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1,
-		    wlan2_adc0, wlan2_adc1,
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@03400000 {
-		compatible = "qcom,msm8998-pinctrl";
-		reg = <0x03400000 0xc00000>;
-		interrupts = <0 208 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 175>;
-		gpio-reserved-ranges = <0 4>, <81 4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		uart_console_active: uart_console_active {
-			mux {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart8_a";
-			};
-
-			config {
-				pins = "gpio4", "gpio5";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml
new file mode 100644
index 0000000000..21ba32cc20
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8998-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8998-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  gpio-line-names:
+    maxItems: 150
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8998-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8998-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8998-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0,
+                atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1,
+                atest_usb10, atest_usb11, atest_usb12, atest_usb13, audio_ref,
+                bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, blsp10_spi_b,
+                blsp11_i2c, blsp1_spi, blsp1_spi_a, blsp1_spi_b, blsp2_spi,
+                blsp9_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+                blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9,
+                blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, blsp_spi2,
+                blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+                blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12,
+                blsp_uart1_a, blsp_uart1_b, blsp_uart2_a, blsp_uart2_b,
+                blsp_uart3_a, blsp_uart3_b, blsp_uart7_a, blsp_uart7_b,
+                blsp_uart8, blsp_uart8_a, blsp_uart8_b, blsp_uart9_a,
+                blsp_uart9_b, blsp_uim1_a, blsp_uim1_b, blsp_uim2_a,
+                blsp_uim2_b, blsp_uim3_a, blsp_uim3_b, blsp_uim7_a,
+                blsp_uim7_b, blsp_uim8_a, blsp_uim8_b, blsp_uim9_a,
+                blsp_uim9_b, bt_reset, btfm_slimbus, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+                edp_hot, edp_lcd, gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b,
+                gcc_gp3_a, gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv,
+                isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus,
+                m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte,
+                nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag,
+                pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc,
+                pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b,
+                qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, qlink_request,
+                qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43,
+                sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq,
+                ter_mi2s, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, tsif0,
+                tsif1, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+                uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
+                vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
+                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3400000 {
+        compatible = "qcom,msm8998-pinctrl";
+        reg = <0x03400000 0xc00000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 150>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-reserved-ranges = <0 4>, <81 4>;
+
+        sdc2-off-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+        };
+
+        sdc2-cd-state {
+            pins = "gpio95";
+            function = "gpio";
+            bias-pull-up;
+            drive-strength = <2>;
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,pmic-mpp.yaml b/dts/Bindings/pinctrl/qcom,pmic-mpp.yaml
index df79274d0e..72cce38bc1 100644
--- a/dts/Bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/dts/Bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -15,28 +15,29 @@ description:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - qcom,pm8018-mpp
-          - qcom,pm8019-mpp
-          - qcom,pm8038-mpp
-          - qcom,pm8058-mpp
-          - qcom,pm8226-mpp
-          - qcom,pm8821-mpp
-          - qcom,pm8841-mpp
-          - qcom,pm8916-mpp
-          - qcom,pm8917-mpp
-          - qcom,pm8921-mpp
-          - qcom,pm8941-mpp
-          - qcom,pm8950-mpp
-          - qcom,pmi8950-mpp
-          - qcom,pm8994-mpp
-          - qcom,pma8084-mpp
-          - qcom,pmi8994-mpp
-
-      - enum:
-          - qcom,spmi-mpp
-          - qcom,ssbi-mpp
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pm8019-mpp
+              - qcom,pm8226-mpp
+              - qcom,pm8841-mpp
+              - qcom,pm8916-mpp
+              - qcom,pm8941-mpp
+              - qcom,pm8950-mpp
+              - qcom,pmi8950-mpp
+              - qcom,pm8994-mpp
+              - qcom,pma8084-mpp
+              - qcom,pmi8994-mpp
+          - const: qcom,spmi-mpp
+      - items:
+          - enum:
+              - qcom,pm8018-mpp
+              - qcom,pm8038-mpp
+              - qcom,pm8058-mpp
+              - qcom,pm8821-mpp
+              - qcom,pm8917-mpp
+              - qcom,pm8921-mpp
+          - const: qcom,ssbi-mpp
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml
index 3f4f1c0360..adf64bfaa4 100644
--- a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. QCM2290 TLMM block
@@ -10,8 +10,7 @@ maintainers:
   - Shawn Guo <shawn.guo@linaro.org>
 
 description:
-  This binding describes the Top Level Mode Multiplexer block found in the
-  QCM2290 platform.
+  Top Level Mode Multiplexer pin controller in Qualcomm QCM2290 SoC.
 
 properties:
   compatible:
@@ -20,46 +19,30 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
+  "#gpio-cells": true
+  gpio-ranges: true
   wakeup-parent: true
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-qcm2290-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+        additionalProperties: false
 
-'$defs':
+$defs:
   qcom-qcm2290-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -96,20 +79,11 @@ patternProperties:
                 uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
                 vsense_trigger, wlan1_adc0, wlan1_adc1 ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
@@ -118,17 +92,11 @@ patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
@@ -146,19 +114,19 @@ examples:
         gpio-ranges = <&tlmm 0 0 127>;
 
         sdc2_on_state: sdc2-on-state {
-            clk {
+            clk-pins {
                 pins = "sdc2_clk";
                 bias-disable;
                 drive-strength = <16>;
             };
 
-            cmd {
+            cmd-pins {
                 pins = "sdc2_cmd";
                 bias-pull-up;
                 drive-strength = <10>;
             };
 
-            data {
+            data-pins {
                 pins = "sdc2_data";
                 bias-pull-up;
                 drive-strength = <10>;
diff --git a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt
deleted file mode 100644
index a50e746841..0000000000
--- a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt
+++ /dev/null
@@ -1,199 +0,0 @@
-Qualcomm QCS404 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-QCS404 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,qcs404-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the north, south and east TLMM
-		    tiles.
-
-- reg-names:
-	Usage: required
-	Value type: <stringlist>
-	Defintiion: names for the cells of reg, must contain "north", "south"
-		    and "east".
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio119
-		        Supports mux, bias and drive-strength
-
-		      sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
-		      sdc2_data
-		        Supports bias and drive-strength
-
-		      ufs_reset
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    gpio, hdmi_tx, hdmi_ddc, blsp_uart_tx_a2, blsp_spi2, m_voc,
-		    qdss_cti_trig_in_a0, blsp_uart_rx_a2, qdss_tracectl_a,
-		    blsp_uart2, aud_cdc, blsp_i2c_sda_a2, qdss_tracedata_a,
-		    blsp_i2c_scl_a2, qdss_tracectl_b, qdss_cti_trig_in_b0,
-		    blsp_uart1, blsp_spi_mosi_a1, blsp_spi_miso_a1,
-		    qdss_tracedata_b, blsp_i2c1, blsp_spi_cs_n_a1, gcc_plltest,
-		    blsp_spi_clk_a1, rgb_data0, blsp_uart5, blsp_spi5,
-		    adsp_ext, rgb_data1, prng_rosc, rgb_data2, blsp_i2c5,
-		    gcc_gp1_clk_b, rgb_data3, gcc_gp2_clk_b, blsp_spi0,
-		    blsp_uart0, gcc_gp3_clk_b, blsp_i2c0, qdss_traceclk_b,
-		    pcie_clk, nfc_irq, blsp_spi4, nfc_dwl, audio_ts, rgb_data4,
-		    spi_lcd, blsp_uart_tx_b2, gcc_gp3_clk_a, rgb_data5,
-		    blsp_uart_rx_b2, blsp_i2c_sda_b2, blsp_i2c_scl_b2,
-		    pwm_led11, i2s_3_data0_a, ebi2_lcd, i2s_3_data1_a,
-		    i2s_3_data2_a, atest_char, pwm_led3, i2s_3_data3_a,
-		    pwm_led4, i2s_4, ebi2_a, dsd_clk_b, pwm_led5, pwm_led6,
-		    pwm_led7, pwm_led8, pwm_led24, spkr_dac0, blsp_i2c4,
-		    pwm_led9, pwm_led10, spdifrx_opt, pwm_led12, pwm_led13,
-		    pwm_led14, wlan1_adc1, rgb_data_b0, pwm_led15,
-		    blsp_spi_mosi_b1, wlan1_adc0, rgb_data_b1, pwm_led16,
-		    blsp_spi_miso_b1, qdss_cti_trig_out_b0, wlan2_adc1,
-		    rgb_data_b2, pwm_led17, blsp_spi_cs_n_b1, wlan2_adc0,
-		    rgb_data_b3, pwm_led18, blsp_spi_clk_b1, rgb_data_b4,
-		    pwm_led19, ext_mclk1_b, qdss_traceclk_a, rgb_data_b5,
-		    pwm_led20, atest_char3, i2s_3_sck_b, ldo_update, bimc_dte0,
-		    rgb_hsync, pwm_led21, i2s_3_ws_b, dbg_out, rgb_vsync,
-		    i2s_3_data0_b, ldo_en, hdmi_dtest, rgb_de, i2s_3_data1_b,
-		    hdmi_lbk9, rgb_clk, atest_char1, i2s_3_data2_b, ebi_cdc,
-		    hdmi_lbk8, rgb_mdp, atest_char0, i2s_3_data3_b, hdmi_lbk7,
-		    rgb_data_b6, rgb_data_b7, hdmi_lbk6, rgmii_int, cri_trng1,
-		    rgmii_wol, cri_trng0, gcc_tlmm, rgmii_ck, rgmii_tx,
-		    hdmi_lbk5, hdmi_pixel, hdmi_rcv, hdmi_lbk4, rgmii_ctl,
-		    ext_lpass, rgmii_rx, cri_trng, hdmi_lbk3, hdmi_lbk2,
-		    qdss_cti_trig_out_b1, rgmii_mdio, hdmi_lbk1, rgmii_mdc,
-		    hdmi_lbk0, ir_in, wsa_en, rgb_data6, rgb_data7,
-		    atest_char2, ebi_ch0, blsp_uart3, blsp_spi3, sd_write,
-		    blsp_i2c3, gcc_gp1_clk_a, qdss_cti_trig_in_b1,
-		    gcc_gp2_clk_a, ext_mclk0, mclk_in1, i2s_1, dsd_clk_a,
-		    qdss_cti_trig_in_a1, rgmi_dll1, pwm_led22, pwm_led23,
-		    qdss_cti_trig_out_a0, rgmi_dll2, pwm_led1,
-		    qdss_cti_trig_out_a1, pwm_led2, i2s_2, pll_bist,
-		    ext_mclk1_a, mclk_in2, bimc_dte1, i2s_3_sck_a, i2s_3_ws_a
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@1000000 {
-		compatible = "qcom,qcs404-pinctrl";
-		reg = <0x01000000 0x200000>,
-		      <0x01300000 0x200000>,
-		      <0x07b00000 0x200000>;
-		reg-names = "south", "north", "east";
-		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 120>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml
new file mode 100644
index 0000000000..29d50c4a00
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC.
+
+properties:
+  compatible:
+    const: qcom,qcs404-pinctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: south
+      - const: north
+      - const: east
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 60
+
+  gpio-line-names:
+    maxItems: 120
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qcs404-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qcs404-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qcs404-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0,
+                bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4,
+                blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2,
+                blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4,
+                blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1,
+                blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1,
+                blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1,
+                blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2,
+                blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a,
+                ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a,
+                ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest,
+                gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1,
+                hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6,
+                hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx,
+                i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a,
+                i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a,
+                i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a,
+                i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1,
+                mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist,
+                prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12,
+                pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17,
+                pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21,
+                pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5,
+                pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0,
+                rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5,
+                rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2,
+                rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6,
+                rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1,
+                rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc,
+                rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write,
+                spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, wsa_en ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,qcs404-pinctrl";
+        reg = <0x01000000 0x200000>,
+              <0x01300000 0x200000>,
+              <0x07b00000 0x200000>;
+        reg-names = "south", "north", "east";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 120>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+
+        blsp1-i2c1-default-state {
+            pins = "gpio24", "gpio25";
+            function = "blsp_i2c1";
+        };
+
+        blsp1-i2c2-default-state {
+            sda-pins {
+                pins = "gpio19";
+                function = "blsp_i2c_sda_a2";
+            };
+
+            scl-pins {
+                pins = "gpio20";
+                function = "blsp_i2c_scl_a2";
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt
deleted file mode 100644
index 6ffeac9801..0000000000
--- a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt
+++ /dev/null
@@ -1,187 +0,0 @@
-Qualcomm Technologies, Inc. SC7180 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-SC7180 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,sc7180-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the north, south and west
-		    TLMM tiles
-
-- reg-names:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: names for the cells of reg, must contain "north", "south"
-		    and "west".
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio118
-		        Supports mux, bias and drive-strength
-
-		      sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
-		      sdc2_data sdc1_rclk
-		        Supports bias and drive-strength
-
-		      ufs_reset
-			Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0,
-		    atest_char1, atest_char2, atest_char3, atest_tsens,
-		    atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
-		    atest_usb12, atest_usb13, atest_usb2, atest_usb20,
-		    atest_usb21, atest_usb22, atest_usb23, audio_ref,
-		    btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
-		    cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-		    cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-		    ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, gcc_gp2,
-		    gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx,
-		    jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync,
-		    mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0,
-		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
-		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
-		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
-		    qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03,
-		    qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart,
-		    qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb,
-		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
-		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
-		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,
-		    vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0,
-		    wlan2_adc1,
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@3500000 {
-		compatible = "qcom,sc7180-pinctrl";
-		reg = <0x3500000 0x300000>,
-		      <0x3900000 0x300000>,
-		      <0x3D00000 0x300000>;
-		reg-names = "west", "north", "south";
-		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 119>;
-		gpio-reserved-ranges = <0 4>, <106 4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml
new file mode 100644
index 0000000000..b40f6dc6ad
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC.
+
+properties:
+  compatible:
+    const: qcom,sc7180-pinctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: north
+      - const: south
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 60
+
+  gpio-line-names:
+    maxItems: 119
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc7180-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc7180-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc7180-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_tsens,
+                atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1,
+                gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx,
+                jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync,
+                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1,
+                mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST,
+                pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti,
+                qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data,
+                qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c,
+                qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12,
+                qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb,
+                sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+                tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1,
+                _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0,
+                wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3500000 {
+        compatible = "qcom,sc7180-pinctrl";
+        reg = <0x03500000 0x300000>,
+              <0x03900000 0x300000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "north", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 120>;
+        wakeup-parent = <&pdc>;
+
+        dp_hot_plug_det: dp-hot-plug-det-state {
+            pins = "gpio117";
+            function = "dp_hot";
+        };
+
+        qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+            spi-pins {
+                pins = "gpio53", "gpio54", "gpio55";
+                function = "qup15";
+            };
+
+            cs-pins {
+                pins = "gpio56";
+                function = "gpio";
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
index 624e14f007..f7ec8a4f66 100644
--- a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -4,15 +4,14 @@
 $id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
-  Low Power Island (LPI) TLMM block
+title: Qualcomm SC7280 SoC LPASS LPI TLMM
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  LPASS LPI IP on most Qualcomm SoCs
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SC7280 SoC.
 
 properties:
   compatible:
@@ -24,12 +23,11 @@ properties:
     type: boolean
 
   reg:
-    minItems: 2
     maxItems: 2
 
   gpio-controller: true
 
-  '#gpio-cells':
+  "#gpio-cells":
     description: Specifying the pin number and flags, as defined in
       include/dt-bindings/gpio/gpio.h
     const: 2
@@ -37,9 +35,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc7280-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc7280-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc7280-lpass-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -83,13 +89,10 @@ patternProperties:
             3: Reserved (No adjustments)
 
       bias-pull-down: true
-
       bias-pull-up: true
-
+      bias-bus-hold: true
       bias-disable: true
-
       output-high: true
-
       output-low: true
 
     required:
@@ -102,7 +105,7 @@ required:
   - compatible
   - reg
   - gpio-controller
-  - '#gpio-cells'
+  - "#gpio-cells"
   - gpio-ranges
 
 additionalProperties: false
@@ -116,4 +119,21 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+        dmic01-state {
+            dmic01-clk-pins {
+                pins = "gpio6";
+                function = "dmic1_clk";
+            };
+
+            dmic01-clk-sleep-pins {
+                pins = "gpio6";
+                function = "dmic1_clk";
+            };
+        };
+
+        tx-swr-data-sleep-state {
+            pins = "gpio1", "gpio2", "gpio14";
+            function = "swr_tx_data";
+        };
     };
diff --git a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index ad34967846..36502173cb 100644
--- a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SC7280 TLMM block
 maintainers:
   - Bjorn Andersson <andersson@kernel.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SC7280 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC7280 SoC.
 
 properties:
   compatible:
@@ -43,17 +42,26 @@ properties:
     maxItems: 1
 
   gpio-line-names:
-    maxItems: 174
+    maxItems: 175
 
   wakeup-parent: true
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc7280-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc7280-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc7280-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -62,7 +70,7 @@ patternProperties:
           subnode.
         items:
           oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
             - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
                       sdc2_cmd, sdc2_data, ufs_reset ]
         minItems: 1
@@ -102,35 +110,18 @@ patternProperties:
                 uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
                 usb_phy, vfr_0, vfr_1, vsense_trigger ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
+      bias-bus-hold: true
       bias-disable: true
-
+      drive-strength: true
+      input-enable: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
 
-    allOf:
-      - $ref: /schemas/pinctrl/pincfg-node.yaml
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 allOf:
@@ -162,7 +153,7 @@ examples:
         gpio-ranges = <&tlmm 0 0 175>;
         wakeup-parent = <&pdc>;
 
-        qup_uart5_default: qup-uart5-pins {
+        qup_uart5_default: qup-uart5-state {
             pins = "gpio46", "gpio47";
             function = "qup13";
             drive-strength = <2>;
diff --git a/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml
index b98eeba2c5..24191d5f64 100644
--- a/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. SC8180X TLMM block
@@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SC8180X TLMM block
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SC8180X platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC8180X SoC.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -26,9 +24,9 @@ properties:
 
   reg-names:
     items:
-      - const: "west"
-      - const: "east"
-      - const: "south"
+      - const: west
+      - const: east
+      - const: south
 
   interrupts: true
   interrupt-controller: true
@@ -47,7 +45,7 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
       - patternProperties:
@@ -55,12 +53,13 @@ patternProperties:
             $ref: "#/$defs/qcom-sc8180x-tlmm-state"
         additionalProperties: false
 
-'$defs':
+$defs:
   qcom-sc8180x-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -112,16 +111,6 @@ patternProperties:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
index 1f468303bb..7d2589387e 100644
--- a/dts/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -4,15 +4,14 @@
 $id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
-  Low Power Island (LPI) TLMM block
+title: Qualcomm SC8280XP SoC LPASS LPI TLMM
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  LPASS LPI IP on most Qualcomm SoCs
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SC8280XP SoC.
 
 properties:
   compatible:
@@ -35,7 +34,7 @@ properties:
 
   gpio-controller: true
 
-  '#gpio-cells':
+  "#gpio-cells":
     description: Specifying the pin number and flags, as defined in
       include/dt-bindings/gpio/gpio.h
     const: 2
@@ -43,9 +42,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8280xp-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8280xp-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc8280xp-lpass-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -58,7 +65,7 @@ patternProperties:
           List of gpio pins affected by the properties specified in this
           subnode.
         items:
-          pattern: "^gpio([0-1]|1[0-8]])$"
+          pattern: "^gpio([0-1]|1[0-8])$"
 
       function:
         enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
@@ -112,7 +119,7 @@ required:
   - clocks
   - clock-names
   - gpio-controller
-  - '#gpio-cells'
+  - "#gpio-cells"
   - gpio-ranges
 
 additionalProperties: false
@@ -130,4 +137,21 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         gpio-ranges = <&lpi_tlmm 0 0 18>;
+
+        dmic01-state {
+            dmic01-clk-pins {
+                pins = "gpio16";
+                function = "dmic1_clk";
+            };
+
+            dmic01-clk-sleep-pins {
+                pins = "gpio16";
+                function = "dmic1_clk";
+            };
+        };
+
+        tx-swr-data-sleep-state {
+            pins = "gpio0", "gpio1";
+            function = "swr_tx_data";
+        };
     };
diff --git a/dts/Bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index b9ab130cd5..4efde29c36 100644
--- a/dts/Bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. SC8280XP TLMM block
@@ -10,8 +10,7 @@ maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SC8280XP platform.
+  Top Level Mode Multiplexer pin controller in Qualcomm SC8280XP SoC.
 
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
@@ -25,10 +24,10 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -39,7 +38,7 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
       - patternProperties:
@@ -47,12 +46,13 @@ patternProperties:
             $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
         additionalProperties: false
 
-'$defs':
+$defs:
   qcom-sc8280xp-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -113,16 +113,6 @@ patternProperties:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 examples:
@@ -139,8 +129,8 @@ examples:
         gpio-ranges = <&tlmm 0 0 230>;
 
         gpio-wo-subnode-state {
-                pins = "gpio1";
-                function = "gpio";
+            pins = "gpio1";
+            function = "gpio";
         };
 
         uart-w-subnodes-state {
diff --git a/dts/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml
new file mode 100644
index 0000000000..bd4fd8404a
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM630 and SDM660 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm630-pinctrl
+      - qcom,sdm660-pinctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: south
+      - const: center
+      - const: north
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 57
+
+  gpio-line-names:
+    maxItems: 114
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdm630-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdm630-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdm630-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1,
+                atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
+                atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20,
+                atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0,
+                bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+                blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b,
+                blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+                blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a,
+                blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1,
+                blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1,
+                blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1,
+                gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c,
+                isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync,
+                mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte,
+                nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0,
+                phase_flag1, phase_flag10, phase_flag11, phase_flag12,
+                phase_flag13, phase_flag14, phase_flag15, phase_flag16,
+                phase_flag17, phase_flag18, phase_flag19, phase_flag2,
+                phase_flag20, phase_flag21, phase_flag22, phase_flag23,
+                phase_flag24, phase_flag25, phase_flag26, phase_flag27,
+                phase_flag28, phase_flag29, phase_flag3, phase_flag30,
+                phase_flag31, phase_flag4, phase_flag5, phase_flag6,
+                phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem,
+                pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b,
+                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2,
+                qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
+                qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk,
+                qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3,
+                qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu,
+                ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk,
+                uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout,
+                vsense_data0, vsense_data1, vsense_mode, wlan1_adc0,
+                wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3100000 {
+        compatible = "qcom,sdm630-pinctrl";
+        reg = <0x03100000 0x400000>,
+              <0x03500000 0x400000>,
+              <0x03900000 0x400000>;
+        reg-names = "south", "center", "north";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 114>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart1-default-state {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-disable;
+        };
+
+        blsp2_uart1_default: blsp2-uart1-active-state {
+            tx-rts-pins {
+                pins = "gpio16", "gpio19";
+                function = "blsp_uart5";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            rx-pins {
+                pins = "gpio17";
+                function = "blsp_uart5";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            cts-pins {
+                pins = "gpio18";
+                function = "blsp_uart5";
+                drive-strength = <2>;
+                bias-pull-down;
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt
deleted file mode 100644
index be034d329e..0000000000
--- a/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt
+++ /dev/null
@@ -1,191 +0,0 @@
-Qualcomm Technologies, Inc. SDM660 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-SDM660 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,sdm660-pinctrl" or
-		    "qcom,sdm630-pinctrl".
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the north, center and south
-		    TLMM tiles.
-
-- reg-names:
-       Usage: required
-       Value type: <stringlist>
-       Definition: names for the cells of reg, must contain "north", "center"
-                   and "south".
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- gpio-ranges:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Specifies the mapping between gpio controller and
-		    pin-controller pins.
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio0-gpio113,
-		        Supports mux, bias and drive-strength
-		    sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk,
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-		    adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
-		    atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1,
-		    atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
-		    atest_usb11, atest_usb12, atest_usb13, atest_usb2,
-		    atest_usb20, atest_usb21, atest_usb22, atest_usb23,
-		    audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2,
-		    blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7,
-		    blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3,
-		    blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5,
-		    blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b,
-		    blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2,
-		    blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1,
-		    blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async,
-		    cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
-		    gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c,
-		    isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync,
-		    mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte,
-		    nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0,
-		    phase_flag1, phase_flag10, phase_flag11, phase_flag12,
-		    phase_flag13, phase_flag14, phase_flag15, phase_flag16,
-		    phase_flag17, phase_flag18, phase_flag19, phase_flag2,
-		    phase_flag20, phase_flag21, phase_flag22, phase_flag23,
-		    phase_flag24, phase_flag25, phase_flag26, phase_flag27,
-		    phase_flag28, phase_flag29, phase_flag3, phase_flag30,
-		    phase_flag31, phase_flag4, phase_flag5, phase_flag6,
-		    phase_flag7, phase_flag8, phase_flag9, pll_bypassnl,
-		    pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto,
-		    pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a,
-		    qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10,
-		    qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
-		    qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
-		    qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request,
-		    qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2,
-		    qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data,
-		    sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2,
-		    uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
-		    uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1,
-		    vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
-		    wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@3100000 {
-		compatible = "qcom,sdm660-pinctrl";
-		reg = <0x3100000 0x200000>,
-		      <0x3500000 0x200000>,
-		      <0x3900000 0x200000>;
-		reg-names = "south", "center", "north";
-		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		gpio-ranges = <&tlmm 0 0 114>;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/dts/Bindings/pinctrl/qcom,sdm670-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sdm670-tlmm.yaml
new file mode 100644
index 0000000000..7585117c0f
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDM670 TLMM block
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description: |
+  The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm670-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdm670-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdm670-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdm670-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
+                atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update,
+                lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
+                mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
+                pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable,
+                qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2,
+                qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk,
+                sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk,
+                tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
+                vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@3400000 {
+        compatible = "qcom,sdm670-tlmm";
+        reg = <0x03400000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 151>;
+
+        qup-i2c9-state {
+            pins = "gpio6", "gpio7";
+            function = "qup9";
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt
deleted file mode 100644
index 7462e3743c..0000000000
--- a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt
+++ /dev/null
@@ -1,176 +0,0 @@
-Qualcomm SDM845 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-SDM845 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,sdm845-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio149
-		        Supports mux, bias and drive-strength
-
-		      sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    gpio, adsp_ext, agera_pll, atest_char, atest_tsens,
-		    atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
-		    atest_usb12, atest_usb13, atest_usb2, atest_usb20,
-		    atest_usb21, atest_usb22, atest_usb23, audio_ref,
-		    btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
-		    cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
-		    cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
-		    ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
-		    gcc_gp2, gcc_gp3, jitter_bist, ldo_en, ldo_update,
-		    lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1,
-		    mdp_vsync2, mdp_vsync3, mss_lte, nav_pps, pa_indicator,
-		    pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
-		    pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti,
-		    qdss, qlink_enable, qlink_request, qua_mi2s, qup0, qup1,
-		    qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, qup4,
-		    qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
-		    qspi_clk, qspi_cs, qspi_data, sd_write, sdc4_clk, sdc4_cmd,
-		    sdc4_data, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu_ch0,
-		    tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2,
-		    tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync,
-		    tsif2_clk, tsif2_data, tsif2_en, tsif2_error, tsif2_sync,
-		    uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
-		    uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy,
-		    vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0,
-		    wlan2_adc1,
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@3400000 {
-		compatible = "qcom,sdm845-pinctrl";
-		reg = <0x03400000 0xc00000>;
-		interrupts = <GIC_SPI 208 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		qup9_active: qup9-active {
-			mux {
-				pins = "gpio4", "gpio5";
-				function = "qup9";
-			};
-
-			config {
-				pins = "gpio4", "gpio5";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-	};
diff --git a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml
new file mode 100644
index 0000000000..c9627777ce
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm845-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  gpio-line-names:
+    maxItems: 150
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdm845-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdm845-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdm845-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2,
+                atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13,
+                atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23,
+                audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
+                gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update,
+                lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0,
+                pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
+                qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0,
+                qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3,
+                qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
+                sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu,
+                spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+                tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
+                tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
+                tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
+                wlan1_adc1, wlan2_adc0, wlan2_adc1]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@3400000 {
+        compatible = "qcom,sdm845-pinctrl";
+        reg = <0x03400000 0xc00000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 151>;
+        wakeup-parent = <&pdc_intc>;
+
+        cci0-default-state {
+            pins = "gpio17", "gpio18";
+            function = "cci_i2c";
+
+            bias-pull-up;
+            drive-strength = <2>;
+        };
+
+        cam0-default-state {
+            rst-pins {
+                pins = "gpio9";
+                function = "gpio";
+
+                drive-strength = <16>;
+                bias-disable;
+            };
+
+            mclk0-pins {
+                pins = "gpio13";
+                function = "cam_mclk";
+
+                drive-strength = <16>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index a38090b14a..a76117e41d 100644
--- a/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SDX55 TLMM block
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SDX55 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC.
 
 properties:
   compatible:
@@ -21,38 +20,32 @@ properties:
     description: Specifies the base address and size of the TLMM register space
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description: Specifies the PIN numbers and Flags, as defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
+  "#gpio-cells": true
+  gpio-ranges: true
 
   gpio-reserved-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx55-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx55-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx55-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -96,62 +89,46 @@ patternProperties:
                 uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
                 uim2_reset, usb2phy_ac, vsense_trigger ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@1f00000 {
-                compatible = "qcom,sdx55-pinctrl";
-                reg = <0x0f100000 0x300000>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 108>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-
-                serial-pins {
-                        pins = "gpio8", "gpio9";
-                        function = "blsp_uart3";
-                        drive-strength = <8>;
-                        bias-disable;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1f00000 {
+        compatible = "qcom,sdx55-pinctrl";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 108>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+        serial-state {
+            pins = "gpio8", "gpio9";
+            function = "blsp_uart3";
+            drive-strength = <8>;
+            bias-disable;
         };
+    };
 
 ...
diff --git a/dts/Bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdx65-tlmm.yaml
index cdfcf29dff..2f53905260 100644
--- a/dts/Bindings/pinctrl/qcom,sdx65-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. SDX65 TLMM block
@@ -10,8 +10,7 @@ maintainers:
   - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
 
 description:
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SDX65 platform.
+  Top Level Mode Multiplexer pin controller in Qualcomm SDX65 SoC.
 
 properties:
   compatible:
@@ -20,44 +19,32 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description: Specifies the PIN numbers and Flags, as defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
+  "#gpio-cells": true
+  gpio-ranges: true
 
   gpio-reserved-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sdx65-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sdx65-tlmm-state"
-'$defs':
+        additionalProperties: false
+
+$defs:
   qcom-sdx65-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -122,37 +109,24 @@ patternProperties:
                 qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
                 gpio ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
@@ -175,13 +149,13 @@ examples:
         };
 
         uart-w-subnodes-state {
-            rx {
+            rx-pins {
                 pins = "gpio4";
                 function = "blsp_uart1";
                 bias-pull-up;
             };
 
-            tx {
+            tx-pins {
                 pins = "gpio5";
                 function = "blsp_uart1";
                 bias-disable;
diff --git a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6115-tlmm.yaml
index e39fbb36d8..164f24db8b 100644
--- a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
@@ -10,15 +10,14 @@ maintainers:
   - Iskren Chernev <iskren.chernev@gmail.com>
 
 description:
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SM4250/6115 platforms.
+  Top Level Mode Multiplexer pin controller in Qualcomm SM4250 and SM6115
+  SoCs.
 
 properties:
   compatible:
     const: qcom,sm6115-tlmm
 
   reg:
-    minItems: 3
     maxItems: 3
 
   reg-names:
@@ -27,35 +26,17 @@ properties:
       - const: south
       - const: east
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
+  "#gpio-cells": true
+  gpio-ranges: true
   gpio-reserved-ranges: true
-
   wakeup-parent: true
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sm6115-tlmm-state"
       - patternProperties:
@@ -63,12 +44,13 @@ patternProperties:
             $ref: "#/$defs/qcom-sm6115-tlmm-state"
         additionalProperties: false
 
-'$defs':
+$defs:
   qcom-sm6115-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -101,50 +83,25 @@ patternProperties:
                 uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
                 wlan1_adc0, elan1_adc1 ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
   - reg-names
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
diff --git a/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6125-tlmm.yaml
index 5cb8b272cb..e1dd54a160 100644
--- a/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -1,19 +1,17 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. SM6125 TLMM block
 
 maintainers:
   - Martin Botka <martin.botka@somainline.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer (TLMM) block found
-  in the SM6125 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM6125 SoC.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -21,21 +19,20 @@ properties:
     const: qcom,sm6125-tlmm
 
   reg:
-    minItems: 3
     maxItems: 3
 
   reg-names:
     items:
-      - const: "west"
-      - const: "south"
-      - const: "east"
+      - const: west
+      - const: south
+      - const: east
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -47,7 +44,7 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sm6125-tlmm-state"
       - patternProperties:
@@ -61,6 +58,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -112,16 +110,6 @@ $defs:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6350-tlmm.yaml
index 856b9c567e..41e3e0afc9 100644
--- a/dts/Bindings/pinctrl/qcom,sm6350-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. SM6350 TLMM block
@@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM6350 TLMM block
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer (TLMM) block found
-  in the SM6350 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -26,10 +24,10 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -40,7 +38,7 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sm6350-tlmm-state"
       - patternProperties:
@@ -54,6 +52,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -111,16 +110,6 @@ $defs:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
index 025faf87d1..d54ebb2bd5 100644
--- a/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM6375 TLMM block
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer (TLMM) block found
-  in the SM6375 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -26,10 +24,10 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -40,7 +38,7 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sm6375-tlmm-state"
       - patternProperties:
@@ -54,6 +52,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -120,16 +119,6 @@ $defs:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt
deleted file mode 100644
index fa37733e51..0000000000
--- a/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-Qualcomm SM8150 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-QCS404 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,sm8150-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the north, south, west
-		    and east TLMM tiles.
-
-- reg-names:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Defintiion: names for the cells of reg, must contain "north", "south"
-		    "west" and "east".
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.
-
-		    Valid pins are:
-		      gpio0-gpio149
-		        Supports mux, bias and drive-strength
-
-		      sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
-		      sdc2_data sdc1_rclk
-		        Supports bias and drive-strength
-
-		      ufs_reset
-		        Supports bias and drive-strength
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-
-		    adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char,
-		    atest_char0, atest_char1, atest_char2, atest_char3,
-		    audio_ref, atest_usb1, atest_usb2, atest_usb10,
-		    atest_usb11, atest_usb12, atest_usb13, atest_usb20,
-		    atest_usb21, atest_usb22, atest_usb2, atest_usb23,
-		    btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
-		    cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-		    cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
-		    ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd,
-		    emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
-		    hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist,
-		    lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1,
-		    mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps,
-		    pa_indicator, pci_e0, phase_flag, pll_bypassnl,
-		    pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws,
-		    prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable,
-		    qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s,
-		    qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
-		    qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16,
-		    qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii,
-		    sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s,
-		    tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
-		    tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
-		    usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
-		    wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configued as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configued as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configued as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@3000000 {
-		compatible = "qcom,sm8150-pinctrl";
-		reg = <0x03100000 0x300000>,
-		      <0x03500000 0x300000>,
-		      <0x03900000 0x300000>,
-		      <0x03D00000 0x300000>;
-		reg-names = "west", "east", "north", "south";
-		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 175>;
-		gpio-reserved-ranges = <0 4>, <126 4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml
new file mode 100644
index 0000000000..85adddbdee
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8150-pinctrl
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: west
+      - const: east
+      - const: north
+      - const: south
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 88
+
+  gpio-line-names:
+    maxItems: 175
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8150-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8150-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8150-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char,
+                atest_char0, atest_char1, atest_char2, atest_char3, audio_ref,
+                atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12,
+                atest_usb13, atest_usb20, atest_usb21, atest_usb22, atest_usb2,
+                atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps,
+                gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s,
+                jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator,
+                pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti,
+                qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3,
+                qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4,
+                qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13,
+                qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5,
+                qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu,
+                ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac,
+                usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, wmss_reset ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3100000 {
+        compatible = "qcom,sm8150-pinctrl";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x300000>,
+              <0x03900000 0x300000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "east", "north", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 176>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        wakeup-parent = <&pdc>;
+
+        qup-spi0-default-state {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3";
+            function = "qup0";
+            drive-strength = <6>;
+            bias-disable;
+        };
+
+        pcie1-default-state {
+            perst-pins {
+                pins = "gpio102";
+                function = "gpio";
+                drive-strength = <2>;
+                bias-pull-down;
+            };
+
+            clkreq-pins {
+                pins = "gpio103";
+                function = "pci_e1";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            wake-pins {
+                pins = "gpio104";
+                function = "gpio";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index 06efb13828..bd45faa3f0 100644
--- a/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -4,22 +4,20 @@
 $id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
-  Low Power Island (LPI) TLMM block
+title: Qualcomm SM8250 SoC LPASS LPI TLMM
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  LPASS LPI IP on most Qualcomm SoCs
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8250 SoC.
 
 properties:
   compatible:
     const: qcom,sm8250-lpass-lpi-pinctrl
 
   reg:
-    minItems: 2
     maxItems: 2
 
   clocks:
@@ -34,7 +32,7 @@ properties:
 
   gpio-controller: true
 
-  '#gpio-cells':
+  "#gpio-cells":
     description: Specifying the pin number and flags, as defined in
       include/dt-bindings/gpio/gpio.h
     const: 2
@@ -42,9 +40,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8250-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8250-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8250-lpass-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -88,13 +94,11 @@ patternProperties:
             3: Reserved (No adjustments)
 
       bias-pull-down: true
-
       bias-pull-up: true
-
+      bias-bus-hold: true
       bias-disable: true
-
+      input-enable: true
       output-high: true
-
       output-low: true
 
     required:
@@ -104,7 +108,7 @@ patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
@@ -112,7 +116,7 @@ required:
   - clocks
   - clock-names
   - gpio-controller
-  - '#gpio-cells'
+  - "#gpio-cells"
   - gpio-ranges
 
 additionalProperties: false
@@ -130,4 +134,28 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         gpio-ranges = <&lpi_tlmm 0 0 14>;
+
+        wsa-swr-active-state {
+            clk-pins {
+                pins = "gpio10";
+                function = "wsa_swr_clk";
+                drive-strength = <2>;
+                slew-rate = <1>;
+                bias-disable;
+            };
+
+            data-pins {
+                pins = "gpio11";
+                function = "wsa_swr_data";
+                drive-strength = <2>;
+                slew-rate = <1>;
+            };
+        };
+
+        tx-swr-sleep-clk-state {
+            pins = "gpio0";
+            function = "swr_tx_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
     };
diff --git a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index c44d02d28b..c80f3847ac 100644
--- a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -9,133 +9,109 @@ title: Qualcomm Technologies, Inc. SM8250 TLMM block
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SM8250 platform.
+description:
+  Top Level Mode Multiplexer pin controller in the Qualcomm SM8250 SoC.
 
 properties:
   compatible:
     const: qcom,sm8250-pinctrl
 
   reg:
-    minItems: 3
     maxItems: 3
 
   reg-names:
     items:
-      - const: "west"
-      - const: "south"
-      - const: "north"
-
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
+      - const: west
+      - const: south
+      - const: north
 
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
 
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 90
 
-  wakeup-parent: true
+  gpio-line-names:
+    maxItems: 180
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '^.*$':
-    if:
-      type: object
-    then:
-      properties:
-        pins:
-          description:
-            List of gpio pins affected by the properties specified in this
-            subnode.
-          items:
-            oneOf:
-              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
-              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
-          minItems: 1
-          maxItems: 36
-
-        function:
-          description:
-            Specify the alternative function to be configured for the specified
-            pins.
-
-          enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
-                  cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
-                  cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-                  ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
-                  ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
-                  mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
-                  mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
-                  mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
-                  pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
-                  pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
-                  qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
-                  qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
-                  qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
-                  sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
-                  tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
-                  tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
-                  tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
-
-        drive-strength:
-          enum: [2, 4, 6, 8, 10, 12, 14, 16]
-          default: 2
-          description:
-            Selects the drive strength for the specified pins, in mA.
-
-        bias-pull-down: true
-
-        bias-pull-up: true
-
-        bias-disable: true
-
-        output-high: true
-
-        output-low: true
-
-      required:
-        - pins
-
-      allOf:
-        - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-        - if:
-            properties:
-              pins:
-                pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
-          then:
-            required:
-              - function
-
-      additionalProperties: false
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8250-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8250-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8250-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+                pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+                qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+                qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+                qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+                sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+                tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+                tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+                tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
   - reg-names
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
@@ -143,16 +119,16 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     pinctrl@1f00000 {
-            compatible = "qcom,sm8250-pinctrl";
-            reg = <0x0f100000 0x300000>,
-                  <0x0f500000 0x300000>,
-                  <0x0f900000 0x300000>;
-            reg-names = "west", "south", "north";
-            interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-            gpio-controller;
-            #gpio-cells = <2>;
-            interrupt-controller;
-            #interrupt-cells = <2>;
-            gpio-ranges = <&tlmm 0 0 180>;
-            wakeup-parent = <&pdc>;
+        compatible = "qcom,sm8250-pinctrl";
+        reg = <0x0f100000 0x300000>,
+              <0x0f500000 0x300000>,
+              <0x0f900000 0x300000>;
+        reg-names = "west", "south", "north";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 180>;
+        wakeup-parent = <&pdc>;
     };
diff --git a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8350-tlmm.yaml
index 6ae5571f60..0b1e4aa581 100644
--- a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm8350-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. SM8350 TLMM block
@@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM8350 TLMM block
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer (TLMM) block found
-  in the SM8350 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8350 SoC.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -26,10 +24,10 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -40,7 +38,7 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sm8350-tlmm-state"
       - patternProperties:
@@ -54,6 +52,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -108,16 +107,6 @@ $defs:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
index 3694795ec7..01a0a4a40b 100644
--- a/dts/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -4,15 +4,14 @@
 $id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
-  Low Power Island (LPI) TLMM block
+title: Qualcomm SM8450 SoC LPASS LPI TLMM
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  LPASS LPI IP on most Qualcomm SoCs
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8450 SoC.
 
 properties:
   compatible:
@@ -35,7 +34,7 @@ properties:
 
   gpio-controller: true
 
-  '#gpio-cells':
+  "#gpio-cells":
     description: Specifying the pin number and flags, as defined in
       include/dt-bindings/gpio/gpio.h
     const: 2
@@ -43,9 +42,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8450-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8450-lpass-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -58,7 +65,7 @@ patternProperties:
           List of gpio pins affected by the properties specified in this
           subnode.
         items:
-          pattern: "^gpio([0-9]|[1-2][0-9]])$"
+          pattern: "^gpio([0-9]|[1-2][0-9])$"
 
       function:
         enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
@@ -114,7 +121,7 @@ required:
   - clocks
   - clock-names
   - gpio-controller
-  - '#gpio-cells'
+  - "#gpio-cells"
   - gpio-ranges
 
 additionalProperties: false
@@ -132,4 +139,28 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         gpio-ranges = <&lpi_tlmm 0 0 23>;
+
+        wsa-swr-active-state {
+            clk-pins {
+                pins = "gpio10";
+                function = "wsa_swr_clk";
+                drive-strength = <2>;
+                slew-rate = <1>;
+                bias-disable;
+            };
+
+            data-pins {
+                pins = "gpio11";
+                function = "wsa_swr_data";
+                drive-strength = <2>;
+                slew-rate = <1>;
+            };
+        };
+
+        tx-swr-sleep-clk-state {
+            pins = "gpio0";
+            function = "swr_tx_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
     };
diff --git a/dts/Bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8450-tlmm.yaml
index 9cd97a4676..4a1d10d6c5 100644
--- a/dts/Bindings/pinctrl/qcom,sm8450-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-tlmm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. SM8450 TLMM block
@@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SM8450 TLMM block
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
-description: |
-  This binding describes the Top Level Mode Multiplexer (TLMM) block found
-  in the SM8450 platform.
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8450 SoC.
 
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
@@ -25,7 +24,7 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
 
   gpio-reserved-ranges:
@@ -35,7 +34,7 @@ properties:
   gpio-line-names:
     maxItems: 209
 
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -46,7 +45,7 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-sm8450-tlmm-state"
       - patternProperties:
@@ -60,6 +59,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -112,16 +112,6 @@ $defs:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml
index c88c8dcb69..e1354f0c64 100644
--- a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml
+++ b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml
@@ -65,10 +65,6 @@ additionalProperties: true
 
 $defs:
   qcom-tlmm-state:
-    allOf:
-      - $ref: pincfg-node.yaml#
-      - $ref: pinmux-node.yaml#
-
     properties:
       drive-strength:
         enum: [2, 4, 6, 8, 10, 12, 14, 16]
@@ -82,5 +78,21 @@ $defs:
       output-high: true
       output-low: true
 
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+      - if:
+          properties:
+            pins:
+              items:
+                pattern: "^gpio"
+        then:
+          required:
+            - function
+        else:
+          properties:
+            function: false
+
     additionalProperties: true
 ...
diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
index b486f41df6..d6539723f3 100644
--- a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
@@ -132,7 +132,7 @@ additionalProperties:
               description:
                 Pin bank index.
             - minimum: 0
-              maximum: 10
+              maximum: 13
               description:
                 Mux 0 means GPIO and mux 1 to N means
                 the specific device function.
diff --git a/dts/Bindings/pinctrl/semtech,sx1501q.yaml b/dts/Bindings/pinctrl/semtech,sx1501q.yaml
new file mode 100644
index 0000000000..0719c03d6f
--- /dev/null
+++ b/dts/Bindings/pinctrl/semtech,sx1501q.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech SX150x GPIO expander
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx1501q
+      - semtech,sx1502q
+      - semtech,sx1503q
+      - semtech,sx1504q
+      - semtech,sx1505q
+      - semtech,sx1506q
+      - semtech,sx1507q
+      - semtech,sx1508q
+      - semtech,sx1509q
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  semtech,probe-reset:
+    description: Will trigger a reset of the GPIO expander on probe
+    type: boolean
+
+patternProperties:
+  '-cfg$':
+    type: object
+    properties:
+      pins: true
+
+      bias-disable: true
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-pull-pin-default: true
+      drive-push-pull: true
+      output-low: true
+      output-high: true
+      drive-open-drain: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "pincfg-node.yaml#"
+      - $ref: "pinmux-node.yaml#"
+      - if:
+          properties:
+            pins:
+              contains:
+                const: oscio
+        then:
+          properties:
+            bias-disable: false
+            bias-pull-up: false
+            bias-pull-down: false
+            bias-pull-pin-default: false
+            drive-open-drain: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - semtech,sx1507q
+                - semtech,sx1508q
+                - semtech,sx1509q
+    then:
+      properties:
+        semtech,probe-reset: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1501q
+              - semtech,sx1504q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^gpio[0-3]$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1502q
+              - semtech,sx1505q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^gpio[0-7]$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1503q
+              - semtech,sx1506q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(gpio[0-9]|gpio1[0-5])$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: semtech,sx1507q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(oscio|gpio[0-3])$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: semtech,sx1508q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(oscio|gpio[0-7])$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: semtech,sx1509q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(oscio|gpio[0-9]|gpio1[0-5])$'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c@1000 {
+        reg = <0x1000 0x80>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl@20 {
+            compatible = "semtech,sx1501q";
+            reg = <0x20>;
+
+            #gpio-cells = <2>;
+            #interrupt-cells = <2>;
+
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+            gpio-controller;
+            interrupt-controller;
+
+            gpio1-cfg {
+                  pins = "gpio1";
+                  bias-pull-up;
+            };
+        };
+    };
diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
index 9d59208d83..eeb29b4ad4 100644
--- a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -34,7 +34,9 @@ properties:
     const: 1
 
   ranges: true
-  pins-are-numbered: true
+  pins-are-numbered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
   hwlocks: true
 
   interrupts:
@@ -206,7 +208,6 @@ required:
   - '#address-cells'
   - '#size-cells'
   - ranges
-  - pins-are-numbered
 
 additionalProperties: false
 
@@ -220,7 +221,6 @@ examples:
               #size-cells = <1>;
               compatible = "st,stm32f429-pinctrl";
               ranges = <0 0x40020000 0x3000>;
-              pins-are-numbered;
 
               gpioa: gpio@0 {
                       gpio-controller;
@@ -238,7 +238,6 @@ examples:
               #size-cells = <1>;
               compatible = "st,stm32f429-pinctrl";
               ranges = <0 0x50020000 0x3000>;
-              pins-are-numbered;
 
               gpiob: gpio@1000 {
                       gpio-controller;
diff --git a/dts/Bindings/power/avs/qcom,cpr.yaml b/dts/Bindings/power/avs/qcom,cpr.yaml
index 301db7daf8..2fd2178d1f 100644
--- a/dts/Bindings/power/avs/qcom,cpr.yaml
+++ b/dts/Bindings/power/avs/qcom,cpr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Core Power Reduction (CPR) bindings
+title: Qualcomm Core Power Reduction (CPR)
 
 maintainers:
   - Niklas Cassel <nks@flawful.org>
diff --git a/dts/Bindings/power/domain-idle-state.yaml b/dts/Bindings/power/domain-idle-state.yaml
index 4ee920a1de..ec1f6f669e 100644
--- a/dts/Bindings/power/domain-idle-state.yaml
+++ b/dts/Bindings/power/domain-idle-state.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: PM Domain Idle States binding description
+title: PM Domain Idle States
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/dts/Bindings/power/fsl,scu-pd.yaml b/dts/Bindings/power/fsl,scu-pd.yaml
index 1f72b18ca0..407b7cfec7 100644
--- a/dts/Bindings/power/fsl,scu-pd.yaml
+++ b/dts/Bindings/power/fsl,scu-pd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - Power Domain Based on SCU Message Protocol
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/power/qcom,rpmpd.yaml b/dts/Bindings/power/qcom,rpmpd.yaml
index 5b4eda9199..633d498840 100644
--- a/dts/Bindings/power/qcom,rpmpd.yaml
+++ b/dts/Bindings/power/qcom,rpmpd.yaml
@@ -28,15 +28,18 @@ properties:
       - qcom,msm8998-rpmpd
       - qcom,qcm2290-rpmpd
       - qcom,qcs404-rpmpd
+      - qcom,qdu1000-rpmhpd
       - qcom,sa8540p-rpmhpd
       - qcom,sdm660-rpmpd
       - qcom,sc7180-rpmhpd
       - qcom,sc7280-rpmhpd
       - qcom,sc8180x-rpmhpd
       - qcom,sc8280xp-rpmhpd
+      - qcom,sdm670-rpmhpd
       - qcom,sdm845-rpmhpd
       - qcom,sdx55-rpmhpd
       - qcom,sdx65-rpmhpd
+      - qcom,sm4250-rpmpd
       - qcom,sm6115-rpmpd
       - qcom,sm6125-rpmpd
       - qcom,sm6350-rpmhpd
@@ -45,6 +48,7 @@ properties:
       - qcom,sm8250-rpmhpd
       - qcom,sm8350-rpmhpd
       - qcom,sm8450-rpmhpd
+      - qcom,sm8550-rpmhpd
 
   '#power-domain-cells':
     const: 1
diff --git a/dts/Bindings/power/renesas,apmu.yaml b/dts/Bindings/power/renesas,apmu.yaml
index f2cc89e7f4..2b4d802ef4 100644
--- a/dts/Bindings/power/renesas,apmu.yaml
+++ b/dts/Bindings/power/renesas,apmu.yaml
@@ -34,10 +34,8 @@ properties:
     maxItems: 1
 
   cpus:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      minItems: 1
-      maxItems: 4
+    minItems: 1
+    maxItems: 4
     description: |
       Array of phandles pointing to CPU cores, which should match the order of
       CPU cores used by the WUPCR and PSTR registers in the Advanced Power
diff --git a/dts/Bindings/power/reset/gpio-restart.yaml b/dts/Bindings/power/reset/gpio-restart.yaml
index a72d5c7215..d3d18e0f5d 100644
--- a/dts/Bindings/power/reset/gpio-restart.yaml
+++ b/dts/Bindings/power/reset/gpio-restart.yaml
@@ -25,6 +25,9 @@ description: >
   inactive-delay, the GPIO is driven active again.  After a delay specified by wait-delay, the
   restart handler completes allowing other restart handlers to be attempted.
 
+allOf:
+  - $ref: restart-handler.yaml#
+
 properties:
   compatible:
     const: gpio-restart
@@ -41,16 +44,6 @@ properties:
       in its inactive state.
 
   priority:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      A priority ranging from 0 to 255 (default 129) according to the following guidelines:
-
-        0:   Restart handler of last resort, with limited restart capabilities.
-        128: Default restart handler; use if no other restart handler is expected to be available,
-             and/or if restart functionality is sufficient to restart the entire system.
-        255: Highest priority restart handler, will preempt all other restart handlers.
-    minimum: 0
-    maximum: 255
     default: 129
 
   active-delay:
diff --git a/dts/Bindings/power/reset/restart-handler.yaml b/dts/Bindings/power/reset/restart-handler.yaml
new file mode 100644
index 0000000000..1f9a2aac53
--- /dev/null
+++ b/dts/Bindings/power/reset/restart-handler.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/restart-handler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Restart and shutdown handler generic binding
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  Restart and shutdown handler device is responsible for powering off the
+  system, e.g. my cutting off the power.  System might have several restart
+  handlers, which usually are tried from most precise to last resort.
+
+properties:
+  priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      A priority ranging from 0 to 255 according to the following guidelines::
+        0::   Restart handler of last resort, with limited restart capabilities.
+        128:: Typical, default restart handler; use if no other restart handler
+              is expected to be available, and/or if restart functionality is
+              sufficient to restart the entire system.
+        255:: Highest priority restart handler, will preempt all other restart handlers.
+    minimum: 0
+    maximum: 255
+
+additionalProperties: true
diff --git a/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml b/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml
index 46de358617..11f1f98c1c 100644
--- a/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml
+++ b/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq MPSoC Power Management Device Tree Bindings
+title: Xilinx Zynq MPSoC Power Management
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/dts/Bindings/power/supply/bq2415x.yaml b/dts/Bindings/power/supply/bq2415x.yaml
index a3c00e0789..f7287ffd4b 100644
--- a/dts/Bindings/power/supply/bq2415x.yaml
+++ b/dts/Bindings/power/supply/bq2415x.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for TI bq2415x Li-Ion Charger
+title: TI bq2415x Li-Ion Charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/bq24190.yaml b/dts/Bindings/power/supply/bq24190.yaml
index 4884ec90e2..001c0ffb40 100644
--- a/dts/Bindings/power/supply/bq24190.yaml
+++ b/dts/Bindings/power/supply/bq24190.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for TI BQ2419x Li-Ion Battery Charger
+title: TI BQ2419x Li-Ion Battery Charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/bq24257.yaml b/dts/Bindings/power/supply/bq24257.yaml
index c7406bef0f..cc45939d38 100644
--- a/dts/Bindings/power/supply/bq24257.yaml
+++ b/dts/Bindings/power/supply/bq24257.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
+title: Bq24250, bq24251 and bq24257 Li-Ion Charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/bq24735.yaml b/dts/Bindings/power/supply/bq24735.yaml
index dd9176ce71..388ee16f8a 100644
--- a/dts/Bindings/power/supply/bq24735.yaml
+++ b/dts/Bindings/power/supply/bq24735.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for TI BQ24735 Li-Ion Battery Charger
+title: TI BQ24735 Li-Ion Battery Charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/bq25890.yaml b/dts/Bindings/power/supply/bq25890.yaml
index 204c014718..dae27e93af 100644
--- a/dts/Bindings/power/supply/bq25890.yaml
+++ b/dts/Bindings/power/supply/bq25890.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
+title: Bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
@@ -15,11 +15,15 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - ti,bq25890
-      - ti,bq25892
-      - ti,bq25895
-      - ti,bq25896
+    oneOf:
+      - enum:
+          - ti,bq25890
+      - items:
+          - enum:
+              - ti,bq25892
+              - ti,bq25895
+              - ti,bq25896
+          - const: ti,bq25890
 
   reg:
     maxItems: 1
@@ -93,7 +97,7 @@ required:
   - ti,boost-voltage
   - ti,boost-max-current
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/power/supply/bq27xxx.yaml b/dts/Bindings/power/supply/bq27xxx.yaml
index 65fc6049ef..347d4433ad 100644
--- a/dts/Bindings/power/supply/bq27xxx.yaml
+++ b/dts/Bindings/power/supply/bq27xxx.yaml
@@ -60,13 +60,11 @@ properties:
 
   monitored-battery:
     description: |
-       phandle of battery characteristics node.
        The fuel gauge uses the following battery properties:
        - energy-full-design-microwatt-hours
        - charge-full-design-microamp-hours
        - voltage-min-design-microvolt
        Both or neither of the *-full-design-*-hours properties must be set.
-       See Documentation/devicetree/bindings/power/supply/battery.yaml
 
   power-supplies: true
 
diff --git a/dts/Bindings/power/supply/dlg,da9150-charger.yaml b/dts/Bindings/power/supply/dlg,da9150-charger.yaml
index b289388952..85bebebb28 100644
--- a/dts/Bindings/power/supply/dlg,da9150-charger.yaml
+++ b/dts/Bindings/power/supply/dlg,da9150-charger.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog Semiconductor DA9150 Charger Power Supply bindings
+title: Dialog Semiconductor DA9150 Charger Power Supply
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/dts/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml
index d47caf59d2..7cc94b8729 100644
--- a/dts/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml
+++ b/dts/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
+title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/ingenic,battery.yaml b/dts/Bindings/power/supply/ingenic,battery.yaml
index 46527038bf..741022b444 100644
--- a/dts/Bindings/power/supply/ingenic,battery.yaml
+++ b/dts/Bindings/power/supply/ingenic,battery.yaml
@@ -5,11 +5,13 @@
 $id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ47xx battery bindings
+title: Ingenic JZ47xx battery
 
 maintainers:
   - Artur Rojek <contact@artur-rojek.eu>
 
+$ref: power-supply.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -28,8 +30,6 @@ properties:
 
   monitored-battery:
     description: >
-      phandle to a "simple-battery" compatible node.
-
       This property must be a phandle to a node using the format described
       in battery.yaml, with the following properties being required:
       - voltage-min-design-microvolt: drained battery voltage,
diff --git a/dts/Bindings/power/supply/isp1704.yaml b/dts/Bindings/power/supply/isp1704.yaml
index 7e3449ed70..fb3a812aa5 100644
--- a/dts/Bindings/power/supply/isp1704.yaml
+++ b/dts/Bindings/power/supply/isp1704.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for NXP ISP1704 USB Charger Detection
+title: NXP ISP1704 USB Charger Detection
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/lltc,lt3651-charger.yaml b/dts/Bindings/power/supply/lltc,lt3651-charger.yaml
index 76cedf95a1..d26ed5eabe 100644
--- a/dts/Bindings/power/supply/lltc,lt3651-charger.yaml
+++ b/dts/Bindings/power/supply/lltc,lt3651-charger.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices LT3651 Charger Power Supply bindings
+title: Analog Devices LT3651 Charger Power Supply
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/lltc,ltc294x.yaml b/dts/Bindings/power/supply/lltc,ltc294x.yaml
index 109b41a0d5..774582cd3a 100644
--- a/dts/Bindings/power/supply/lltc,ltc294x.yaml
+++ b/dts/Bindings/power/supply/lltc,ltc294x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
+title: LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
 
 description: |
   All chips measure battery capacity.
diff --git a/dts/Bindings/power/supply/maxim,ds2760.yaml b/dts/Bindings/power/supply/maxim,ds2760.yaml
index c838efcf7e..5faa2418fe 100644
--- a/dts/Bindings/power/supply/maxim,ds2760.yaml
+++ b/dts/Bindings/power/supply/maxim,ds2760.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Maxim DS2760 DT bindings
+title: Maxim DS2760
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/maxim,max14656.yaml b/dts/Bindings/power/supply/maxim,max14656.yaml
index 070ef6f96e..711066b8cd 100644
--- a/dts/Bindings/power/supply/maxim,max14656.yaml
+++ b/dts/Bindings/power/supply/maxim,max14656.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Maxim MAX14656 DT bindings
+title: Maxim MAX14656
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/maxim,max17042.yaml b/dts/Bindings/power/supply/maxim,max17042.yaml
index aff5d0792e..64a0edb7bc 100644
--- a/dts/Bindings/power/supply/maxim,max17042.yaml
+++ b/dts/Bindings/power/supply/maxim,max17042.yaml
@@ -59,6 +59,8 @@ properties:
       Voltage threshold to report battery as over voltage (in mV).
       Default is not to report over-voltage events.
 
+  power-supplies: true
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/power/supply/mt6360_charger.yaml b/dts/Bindings/power/supply/mt6360_charger.yaml
index b89b15a5bf..4c74cc7872 100644
--- a/dts/Bindings/power/supply/mt6360_charger.yaml
+++ b/dts/Bindings/power/supply/mt6360_charger.yaml
@@ -26,6 +26,7 @@ properties:
     type: object
     description: OTG boost regulator.
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
@@ -39,7 +40,6 @@ examples:
       richtek,vinovp-microvolt = <14500000>;
 
       otg_vbus_regulator: usb-otg-vbus-regulator {
-        regulator-compatible = "usb-otg-vbus";
         regulator-name = "usb-otg-vbus";
         regulator-min-microvolt = <4425000>;
         regulator-max-microvolt = <5825000>;
diff --git a/dts/Bindings/power/supply/power-supply.yaml b/dts/Bindings/power/supply/power-supply.yaml
index 2f672e6e8d..4e54c93797 100644
--- a/dts/Bindings/power/supply/power-supply.yaml
+++ b/dts/Bindings/power/supply/power-supply.yaml
@@ -18,4 +18,10 @@ properties:
       This property is added to a supply in order to list the devices which
       supply it power, referenced by their phandles.
 
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The battery (with "simple-battery" compatible) being monitored by this
+      power supply.
+
 additionalProperties: true
diff --git a/dts/Bindings/power/supply/richtek,rt9455.yaml b/dts/Bindings/power/supply/richtek,rt9455.yaml
index bce1510131..27bebc1757 100644
--- a/dts/Bindings/power/supply/richtek,rt9455.yaml
+++ b/dts/Bindings/power/supply/richtek,rt9455.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Richtek rt9455 battery charger
+title: Richtek rt9455 battery charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/rohm,bd99954.yaml b/dts/Bindings/power/supply/rohm,bd99954.yaml
index 24b06957b4..b2c229ed24 100644
--- a/dts/Bindings/power/supply/rohm,bd99954.yaml
+++ b/dts/Bindings/power/supply/rohm,bd99954.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD99954 Battery charger
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
   - Markus Laine <markus.laine@fi.rohmeurope.com>
   - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
 
@@ -18,6 +18,7 @@ description: |
   provides a Dual-source Battery Charger, two port BC1.2 detection and a
   Battery Monitor.
 
+$ref: power-supply.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/power/supply/sc2731-charger.yaml b/dts/Bindings/power/supply/sc2731-charger.yaml
index eeb043f9bb..a846a4d14c 100644
--- a/dts/Bindings/power/supply/sc2731-charger.yaml
+++ b/dts/Bindings/power/supply/sc2731-charger.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC2731 PMICs battery charger binding
+title: Spreadtrum SC2731 PMICs battery charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
@@ -28,7 +28,6 @@ properties:
       The charger uses the following battery properties
       - charge-term-current-microamp: current for charge termination phase.
       - constant-charge-voltage-max-microvolt: maximum constant input voltage.
-      See Documentation/devicetree/bindings/power/supply/battery.yaml
 
 additionalProperties: false
 
diff --git a/dts/Bindings/power/supply/sc27xx-fg.yaml b/dts/Bindings/power/supply/sc27xx-fg.yaml
index d90a838a17..de43e45a43 100644
--- a/dts/Bindings/power/supply/sc27xx-fg.yaml
+++ b/dts/Bindings/power/supply/sc27xx-fg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/supply/ti,lp8727.yaml b/dts/Bindings/power/supply/ti,lp8727.yaml
index 93654e732c..ce6fbdba8f 100644
--- a/dts/Bindings/power/supply/ti,lp8727.yaml
+++ b/dts/Bindings/power/supply/ti,lp8727.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for TI/National Semiconductor LP8727 Charger
+title: TI/National Semiconductor LP8727 Charger
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/wakeup-source.txt b/dts/Bindings/power/wakeup-source.txt
index cfd74659fb..697333a56d 100644
--- a/dts/Bindings/power/wakeup-source.txt
+++ b/dts/Bindings/power/wakeup-source.txt
@@ -17,15 +17,14 @@ interrupt.
 List of legacy properties and respective binding document
 ---------------------------------------------------------
 
-1. "enable-sdio-wakeup"		Documentation/devicetree/bindings/mmc/mmc.txt
-2. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
-3. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
-4. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+1. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
+2. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
+3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
-5. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
-6. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
-7. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+6. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
 
 Examples
 --------
diff --git a/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 4cc3cc7c50..66e400f2a3 100644
--- a/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -25,7 +25,9 @@ properties:
           - const: allwinner,sun8i-a83t-pwm
           - const: allwinner,sun8i-h3-pwm
       - items:
-          - const: allwinner,sun8i-v3s-pwm
+          - enum:
+              - allwinner,suniv-f1c100s-pwm
+              - allwinner,sun8i-v3s-pwm
           - const: allwinner,sun7i-a20-pwm
       - items:
           - const: allwinner,sun50i-a64-pwm
diff --git a/dts/Bindings/pwm/google,cros-ec-pwm.yaml b/dts/Bindings/pwm/google,cros-ec-pwm.yaml
index c8577bdf6c..3afe1480df 100644
--- a/dts/Bindings/pwm/google,cros-ec-pwm.yaml
+++ b/dts/Bindings/pwm/google,cros-ec-pwm.yaml
@@ -48,6 +48,7 @@ examples:
         cros-ec@0 {
             compatible = "google,cros-ec-spi";
             reg = <0>;
+            interrupts = <101 0>;
 
             cros_ec_pwm: pwm {
                 compatible = "google,cros-ec-pwm";
diff --git a/dts/Bindings/pwm/microchip,corepwm.yaml b/dts/Bindings/pwm/microchip,corepwm.yaml
index a7fae1772a..70d563d44c 100644
--- a/dts/Bindings/pwm/microchip,corepwm.yaml
+++ b/dts/Bindings/pwm/microchip,corepwm.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip IP corePWM controller bindings
+title: Microchip IP corePWM controller
 
 maintainers:
   - Conor Dooley <conor.dooley@microchip.com>
@@ -30,7 +30,9 @@ properties:
     maxItems: 1
 
   "#pwm-cells":
-    const: 2
+    enum: [2, 3]
+    description:
+      The only flag supported by the controller is PWM_POLARITY_INVERTED.
 
   microchip,sync-update-mask:
     description: |
diff --git a/dts/Bindings/pwm/nvidia,tegra20-pwm.txt b/dts/Bindings/pwm/nvidia,tegra20-pwm.txt
deleted file mode 100644
index 74c41e34c3..0000000000
--- a/dts/Bindings/pwm/nvidia,tegra20-pwm.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-Tegra SoC PWFM controller
-
-Required properties:
-- compatible: Must be:
-  - "nvidia,tegra20-pwm": for Tegra20
-  - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30
-  - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114
-  - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124
-  - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132
-  - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210
-  - "nvidia,tegra186-pwm": for Tegra186
-  - "nvidia,tegra194-pwm": for Tegra194
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
-  the cells format.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - pwm
-
-Optional properties:
-============================
-In some of the interface like PWM based regulator device, it is required
-to configure the pins differently in different states, especially in suspend
-state of the system. The configuration of pin is provided via the pinctrl
-DT node as detailed in the pinctrl DT binding document
-	Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-The PWM node will have following optional properties.
-pinctrl-names:	Pin state names. Must be "default" and "sleep".
-pinctrl-0:	phandle for the default/active state of pin configurations.
-pinctrl-1:	phandle for the sleep state of pin configurations.
-
-Example:
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car 17>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-	};
-
-
-Example with the pin configuration for suspend and resume:
-=========================================================
-Suppose pin PE7 (On Tegra210) interfaced with the regulator device and
-it requires PWM output to be tristated when system enters suspend.
-Following will be DT binding to achieve this:
-
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-
-	pinmux@700008d4 {
-		pwm_active_state: pwm_active_state {
-                        pe7 {
-                                nvidia,pins = "pe7";
-                                nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		pwm_sleep_state: pwm_sleep_state {
-                        pe7 {
-                                nvidia,pins = "pe7";
-                                nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	pwm@7000a000 {
-		/* Mandatory PWM properties */
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&pwm_active_state>;
-		pinctrl-1 = <&pwm_sleep_state>;
-	};
diff --git a/dts/Bindings/pwm/nvidia,tegra20-pwm.yaml b/dts/Bindings/pwm/nvidia,tegra20-pwm.yaml
new file mode 100644
index 0000000000..739d3155dd
--- /dev/null
+++ b/dts/Bindings/pwm/nvidia,tegra20-pwm.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nvidia,tegra20-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra PWFM controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-pwm
+          - nvidia,tegra186-pwm
+
+      - items:
+          - enum:
+              - nvidia,tegra30-pwm
+              - nvidia,tegra114-pwm
+              - nvidia,tegra124-pwm
+              - nvidia,tegra132-pwm
+              - nvidia,tegra210-pwm
+          - enum:
+              - nvidia,tegra20-pwm
+
+      - items:
+          - const: nvidia,tegra194-pwm
+          - const: nvidia,tegra186-pwm
+
+      - items:
+          - const: nvidia,tegra234-pwm
+          - const: nvidia,tegra194-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: pwm
+
+  "#pwm-cells":
+    const: 2
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: sleep
+
+  pinctrl-0:
+    description: configuration for the default/active state
+
+  pinctrl-1:
+    description: configuration for the sleep state
+
+  operating-points-v2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+allOf:
+  - $ref: pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    pwm: pwm@7000a000 {
+        compatible = "nvidia,tegra20-pwm";
+        reg = <0x7000a000 0x100>;
+        #pwm-cells = <2>;
+        clocks = <&tegra_car TEGRA20_CLK_PWM>;
+        resets = <&tegra_car 17>;
+        reset-names = "pwm";
+    };
diff --git a/dts/Bindings/pwm/renesas,pwm-rcar.yaml b/dts/Bindings/pwm/renesas,pwm-rcar.yaml
index 1c94acbc2b..4c80970106 100644
--- a/dts/Bindings/pwm/renesas,pwm-rcar.yaml
+++ b/dts/Bindings/pwm/renesas,pwm-rcar.yaml
@@ -35,6 +35,7 @@ properties:
           - renesas,pwm-r8a77980  # R-Car V3H
           - renesas,pwm-r8a77990  # R-Car E3
           - renesas,pwm-r8a77995  # R-Car D3
+          - renesas,pwm-r8a779g0  # R-Car V4H
       - const: renesas,pwm-rcar
 
   reg:
diff --git a/dts/Bindings/pwm/renesas,tpu-pwm.yaml b/dts/Bindings/pwm/renesas,tpu-pwm.yaml
index c6b2ab56b7..a3e52b22dd 100644
--- a/dts/Bindings/pwm/renesas,tpu-pwm.yaml
+++ b/dts/Bindings/pwm/renesas,tpu-pwm.yaml
@@ -40,6 +40,7 @@ properties:
           - renesas,tpu-r8a77970  # R-Car V3M
           - renesas,tpu-r8a77980  # R-Car V3H
           - renesas,tpu-r8a779a0  # R-Car V3U
+          - renesas,tpu-r8a779g0  # R-Car V4H
       - const: renesas,tpu
 
   reg:
diff --git a/dts/Bindings/regulator/google,cros-ec-regulator.yaml b/dts/Bindings/regulator/google,cros-ec-regulator.yaml
index 69e5402da7..0921f012c9 100644
--- a/dts/Bindings/regulator/google,cros-ec-regulator.yaml
+++ b/dts/Bindings/regulator/google,cros-ec-regulator.yaml
@@ -41,6 +41,7 @@ examples:
             reg = <0>;
             #address-cells = <1>;
             #size-cells = <0>;
+            interrupts = <99 0>;
 
             regulator@0 {
                 compatible = "google,cros-ec-regulator";
diff --git a/dts/Bindings/regulator/max77650-regulator.yaml b/dts/Bindings/regulator/max77650-regulator.yaml
index ce0a4021ae..01b9775a92 100644
--- a/dts/Bindings/regulator/max77650-regulator.yaml
+++ b/dts/Bindings/regulator/max77650-regulator.yaml
@@ -26,6 +26,7 @@ properties:
 patternProperties:
   "^regulator-(ldo|sbb[0-2])$":
     $ref: "regulator.yaml#"
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/regulator/max8660.yaml b/dts/Bindings/regulator/max8660.yaml
index 9c038698f8..35792a927b 100644
--- a/dts/Bindings/regulator/max8660.yaml
+++ b/dts/Bindings/regulator/max8660.yaml
@@ -24,8 +24,9 @@ properties:
     type: object
 
     patternProperties:
-      "regulator-.+":
+      "^regulator-.+$":
         $ref: "regulator.yaml#"
+        unevaluatedProperties: false
 
     additionalProperties: false
 
@@ -43,31 +44,26 @@ examples:
 
         regulators {
           regulator-V3 {
-            regulator-compatible= "V3(DCDC)";
             regulator-min-microvolt = <725000>;
             regulator-max-microvolt = <1800000>;
           };
 
           regulator-V4 {
-            regulator-compatible= "V4(DCDC)";
             regulator-min-microvolt = <725000>;
             regulator-max-microvolt = <1800000>;
           };
 
           regulator-V5 {
-            regulator-compatible= "V5(LDO)";
             regulator-min-microvolt = <1700000>;
             regulator-max-microvolt = <2000000>;
           };
 
           regulator-V6 {
-            regulator-compatible= "V6(LDO)";
             regulator-min-microvolt = <1800000>;
             regulator-max-microvolt = <3300000>;
           };
 
           regulator-V7 {
-            regulator-compatible= "V7(LDO)";
             regulator-min-microvolt = <1800000>;
             regulator-max-microvolt = <3300000>;
           };
diff --git a/dts/Bindings/regulator/maxim,max77802.yaml b/dts/Bindings/regulator/maxim,max77802.yaml
index 71138c611b..b704f05ea4 100644
--- a/dts/Bindings/regulator/maxim,max77802.yaml
+++ b/dts/Bindings/regulator/maxim,max77802.yaml
@@ -77,7 +77,7 @@ patternProperties:
       regulator-initial-mode: false
 
     patternProperties:
-      regulator-state-(standby|mem|disk):
+      "^regulator-state-(standby|mem|disk)$":
         type: object
         additionalProperties: true
         properties:
diff --git a/dts/Bindings/regulator/mediatek,mt6357-regulator.yaml b/dts/Bindings/regulator/mediatek,mt6357-regulator.yaml
new file mode 100644
index 0000000000..6327bb2f6e
--- /dev/null
+++ b/dts/Bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6357-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6357 Regulators
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+  - Fabien Parent <fabien.parent@linaro.org>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+  The MT6357 PMIC provides 5 BUCK and 29 LDO.
+  Regulators and nodes are named according to the regulator type:
+  - buck-<name>
+  - ldo-<name>.
+  MT6357 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(core|modem|pa|proc|s1)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
+    type: object
+    $ref: fixed-regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single fixed LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(efuse|ibr|ldo28|mch|cama|camd|cn33-bt|cn33-wifi)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(xo22|emc|mc|sim1|sim2|sram-others|sram-proc|dram|usb33)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6357_vproc_reg: buck-vproc {
+          regulator-name = "vproc";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vcore_reg: buck-vcore {
+          regulator-name = "vcore";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vmodem_reg: buck-vmodem {
+          regulator-name = "vmodem";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+        };
+        mt6357_vs1_reg: buck-vs1 {
+          regulator-name = "vs1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3650000>;
+          regulator-ramp-delay = <50000>;
+          regulator-enable-ramp-delay = <220>;
+        };
+        mt6357_vfe28_reg: ldo-vfe28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vfe28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vxo22_reg: ldo-vxo22 {
+          regulator-name = "vxo22";
+          regulator-min-microvolt = <2200000>;
+          regulator-max-microvolt = <2400000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vrf18_reg: ldo-vrf18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vrf18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vrf12_reg: ldo-vrf12 {
+          compatible = "regulator-fixed";
+          regulator-name = "vrf12";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1200000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vefuse_reg: ldo-vefuse {
+          regulator-name = "vefuse";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+          regulator-name = "vcn33-bt";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3500000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+          regulator-name = "vcn33-wifi";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3500000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn28_reg: ldo-vcn28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcn28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn18_reg: ldo-vcn18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcn18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcamio_reg: ldo-vcamio18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcamio";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vldo28_reg: ldo-vldo28 {
+          regulator-name = "vldo28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vsram_others_reg: ldo-vsram-others {
+          regulator-name = "vsram-others";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <110>;
+          regulator-always-on;
+        };
+        mt6357_vsram_proc_reg: ldo-vsram-proc {
+          regulator-name = "vsram-proc";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <110>;
+          regulator-always-on;
+        };
+        mt6357_vaux18_reg: ldo-vaux18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vaux18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vaud28_reg: ldo-vaud28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vaud28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vio28_reg: ldo-vio28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vio18_reg: ldo-vio18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+          regulator-always-on;
+        };
+        mt6357_vdram_reg: ldo-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1200000>;
+          regulator-enable-ramp-delay = <3300>;
+        };
+        mt6357_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vemc_reg: ldo-vemc {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+          regulator-always-on;
+        };
+        mt6357_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+      };
+    };
+...
diff --git a/dts/Bindings/regulator/mt6360-regulator.yaml b/dts/Bindings/regulator/mt6360-regulator.yaml
index a462d99a25..8a0931dc2f 100644
--- a/dts/Bindings/regulator/mt6360-regulator.yaml
+++ b/dts/Bindings/regulator/mt6360-regulator.yaml
@@ -27,9 +27,11 @@ properties:
 patternProperties:
   "^buck[12]$":
     $ref: "regulator.yaml#"
+    unevaluatedProperties: false
 
   "^ldo[123567]$":
     $ref: "regulator.yaml#"
+    unevaluatedProperties: false
 
 required:
   - compatible
@@ -44,7 +46,6 @@ examples:
       compatible = "mediatek,mt6360-regulator";
       LDO_VIN3-supply = <&BUCK2>;
       buck1 {
-        regulator-compatible = "BUCK1";
         regulator-name = "mt6360,buck1";
         regulator-min-microvolt = <300000>;
         regulator-max-microvolt = <1300000>;
@@ -53,7 +54,6 @@ examples:
              MT6360_OPMODE_ULP>;
       };
       BUCK2: buck2 {
-        regulator-compatible = "BUCK2";
         regulator-name = "mt6360,buck2";
         regulator-min-microvolt = <300000>;
         regulator-max-microvolt = <1300000>;
@@ -62,7 +62,6 @@ examples:
              MT6360_OPMODE_ULP>;
       };
       ldo6 {
-        regulator-compatible = "LDO6";
         regulator-name = "mt6360,ldo6";
         regulator-min-microvolt = <500000>;
         regulator-max-microvolt = <2100000>;
@@ -70,7 +69,6 @@ examples:
              MT6360_OPMODE_LP>;
       };
       ldo7 {
-        regulator-compatible = "LDO7";
         regulator-name = "mt6360,ldo7";
         regulator-min-microvolt = <500000>;
         regulator-max-microvolt = <2100000>;
@@ -78,15 +76,13 @@ examples:
              MT6360_OPMODE_LP>;
       };
       ldo1 {
-        regulator-compatible = "LDO1";
         regulator-name = "mt6360,ldo1";
         regulator-min-microvolt = <1200000>;
         regulator-max-microvolt = <3600000>;
         regulator-allowed-modes = <MT6360_OPMODE_NORMAL
              MT6360_OPMODE_LP>;
       };
-        ldo2 {
-        regulator-compatible = "LDO2";
+      ldo2 {
         regulator-name = "mt6360,ldo2";
         regulator-min-microvolt = <1200000>;
         regulator-max-microvolt = <3600000>;
@@ -94,7 +90,6 @@ examples:
              MT6360_OPMODE_LP>;
       };
       ldo3 {
-        regulator-compatible = "LDO3";
         regulator-name = "mt6360,ldo3";
         regulator-min-microvolt = <1200000>;
         regulator-max-microvolt = <3600000>;
@@ -102,7 +97,6 @@ examples:
              MT6360_OPMODE_LP>;
       };
       ldo5 {
-        regulator-compatible = "LDO5";
         regulator-name = "mt6360,ldo5";
         regulator-min-microvolt = <2700000>;
         regulator-max-microvolt = <3600000>;
diff --git a/dts/Bindings/regulator/pwm-regulator.yaml b/dts/Bindings/regulator/pwm-regulator.yaml
index 82b6f2fde4..7e58471097 100644
--- a/dts/Bindings/regulator/pwm-regulator.yaml
+++ b/dts/Bindings/regulator/pwm-regulator.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for the Generic PWM Regulator
+title: Generic PWM Regulator
 
 maintainers:
   - Brian Norris <briannorris@chromium.org>
diff --git a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml
index 90c3bda31c..297a75069f 100644
--- a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml
@@ -47,6 +47,7 @@ description: |
       For PM8350, smps1 - smps12, ldo1 - ldo10
       For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
       For PM8450, smps1 - smps6, ldo1 - ldo4
+      For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2
       For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
       For PMI8998, bob
       For PMR735A, smps1 - smps3, ldo1 - ldo7
@@ -70,6 +71,9 @@ properties:
       - qcom,pm8350-rpmh-regulators
       - qcom,pm8350c-rpmh-regulators
       - qcom,pm8450-rpmh-regulators
+      - qcom,pm8550-rpmh-regulators
+      - qcom,pm8550ve-rpmh-regulators
+      - qcom,pm8550vs-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
       - qcom,pmg1110-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
@@ -83,7 +87,7 @@ properties:
         RPMh resource name suffix used for the regulators found
         on this PMIC.
     $ref: /schemas/types.yaml#/definitions/string
-    enum: [a, b, c, d, e, f, h, k]
+    enum: [a, b, c, d, e, f, g, h, k]
 
   qcom,always-wait-for-ack:
     description: |
@@ -107,7 +111,7 @@ properties:
       regulator-allow-set-load: ["regulator-allowed-modes"]
 
 patternProperties:
-  "^(smps|ldo|lvs)[0-9]+$":
+  "^(smps|ldo|lvs|bob)[0-9]+$":
     type: object
     $ref: "regulator.yaml#"
     description: smps/ldo regulator nodes(s).
@@ -303,6 +307,24 @@ allOf:
       properties:
         compatible:
           enum:
+            - qcom,pm8550-rpmh-regulators
+            - qcom,pm8550ve-rpmh-regulators
+            - qcom,pm8550vs-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l13-l14-supply: true
+        vdd-l5-l16-supply: true
+        vdd-l6-l7-supply: true
+        vdd-l8-l9-supply: true
+      patternProperties:
+        "^vdd-l([1-4]|1[0-7])-supply$": true
+        "^vdd-s[1-6]-supply$": true
+        "^vdd-bob[1-2]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - qcom,pm8998-rpmh-regulators
     then:
       properties:
@@ -412,9 +434,8 @@ examples:
             regulator-min-microvolt = <1800000>;
             regulator-max-microvolt = <1800000>;
             regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-            regulator-allowed-modes =
-                <RPMH_REGULATOR_MODE_LPM
-                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                       RPMH_REGULATOR_MODE_HPM>;
             regulator-allow-set-load;
         };
 
@@ -431,9 +452,8 @@ examples:
         bob {
             regulator-min-microvolt = <3312000>;
             regulator-max-microvolt = <3600000>;
-            regulator-allowed-modes =
-                <RPMH_REGULATOR_MODE_AUTO
-                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_AUTO
+                                       RPMH_REGULATOR_MODE_HPM>;
             regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
         };
     };
diff --git a/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml b/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml
index 961eed5191..8c45f53212 100644
--- a/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -71,6 +71,8 @@ description:
 
   For pmi8998, bob
 
+  For pmr735a, s1, s2, s3, l1, l2, l3, l4, l5, l6, l7
+
   For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13
 
@@ -98,6 +100,7 @@ properties:
       - qcom,rpm-pma8084-regulators
       - qcom,rpm-pmi8994-regulators
       - qcom,rpm-pmi8998-regulators
+      - qcom,rpm-pmr735a-regulators
       - qcom,rpm-pms405-regulators
 
 patternProperties:
diff --git a/dts/Bindings/regulator/regulator-output.yaml b/dts/Bindings/regulator/regulator-output.yaml
new file mode 100644
index 0000000000..078b37a1a7
--- /dev/null
+++ b/dts/Bindings/regulator/regulator-output.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/regulator/regulator-output.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator output connector
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+description: |
+  This describes a power output connector supplied by a regulator,
+  such as a power outlet on a power distribution unit (PDU).  The
+  connector may be standalone or merely one channel or set of pins
+  within a ganged physical connector carrying multiple independent
+  power outputs.
+
+properties:
+  compatible:
+    const: regulator-output
+
+  vout-supply:
+    description:
+      Phandle of the regulator supplying the output.
+
+required:
+  - compatible
+  - vout-supply
+
+additionalProperties: false
+
+examples:
+  - |
+      output {
+          compatible = "regulator-output";
+          vout-supply = <&output_reg>;
+      };
diff --git a/dts/Bindings/regulator/regulator.yaml b/dts/Bindings/regulator/regulator.yaml
index 6e8aa9eed3..53b81d8a2d 100644
--- a/dts/Bindings/regulator/regulator.yaml
+++ b/dts/Bindings/regulator/regulator.yaml
@@ -231,7 +231,7 @@ patternProperties:
   ".*-supply$":
     description: Input supply phandle(s) for this node
 
-  regulator-state-(standby|mem|disk):
+  "^regulator-state-(standby|mem|disk)$":
     type: object
     description:
       sub-nodes for regulator state in Standby, Suspend-to-RAM, and
diff --git a/dts/Bindings/regulator/richtek,rt6190.yaml b/dts/Bindings/regulator/richtek,rt6190.yaml
new file mode 100644
index 0000000000..29f7d3d5d6
--- /dev/null
+++ b/dts/Bindings/regulator/richtek,rt6190.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6190 4-Switch BuckBoost controller
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6190 is 4-Switch BuckBoost controller designed for converting input
+  voltage to output voltage that can be equal to, higher or lower than input
+  voltage. It operates with wide input voltage range from 4.5V to 36V, and
+  the output voltage can be set from 3V to 36V by external FB pin. It's commonly
+  used for the application like as BuckBoost bus supply, docking station and USB
+  power delivery product.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6190
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: PSM mode (light load Power Saving Mode)
+        1: FCCM mode (Forced-CCM mode)
+    maxItems: 2
+    items:
+      enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@2c {
+        compatible = "richtek,rt6190";
+        reg = <0x2c>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
+        regulator-name = "richtek,rt6190-buckboost";
+        regulator-min-microvolt = <3000000>;
+        regulator-max-microvolt = <32000000>;
+        regulator-min-microamp = <306000>;
+        regulator-max-microamp = <12114000>;
+        regulator-allowed-modes = <0 1>;
+      };
+    };
diff --git a/dts/Bindings/regulator/rohm,bd71815-regulator.yaml b/dts/Bindings/regulator/rohm,bd71815-regulator.yaml
index d61e8675f0..027fab3dc1 100644
--- a/dts/Bindings/regulator/rohm,bd71815-regulator.yaml
+++ b/dts/Bindings/regulator/rohm,bd71815-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD71815 Power Management Integrated Circuit regulators
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   This module is part of the ROHM BD718215 MFD device. For more details
diff --git a/dts/Bindings/regulator/rohm,bd71828-regulator.yaml b/dts/Bindings/regulator/rohm,bd71828-regulator.yaml
index 5ce587fff9..3cbe3b76cc 100644
--- a/dts/Bindings/regulator/rohm,bd71828-regulator.yaml
+++ b/dts/Bindings/regulator/rohm,bd71828-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD71828 Power Management Integrated Circuit regulators
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   This module is part of the ROHM BD71828 MFD device. For more details
diff --git a/dts/Bindings/regulator/rohm,bd71837-regulator.yaml b/dts/Bindings/regulator/rohm,bd71837-regulator.yaml
index 1941b36cf1..ab842817d8 100644
--- a/dts/Bindings/regulator/rohm,bd71837-regulator.yaml
+++ b/dts/Bindings/regulator/rohm,bd71837-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD71837 Power Management Integrated Circuit regulators
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   List of regulators provided by this controller. BD71837 regulators node
diff --git a/dts/Bindings/regulator/rohm,bd71847-regulator.yaml b/dts/Bindings/regulator/rohm,bd71847-regulator.yaml
index a1b8063738..65fc3d15f6 100644
--- a/dts/Bindings/regulator/rohm,bd71847-regulator.yaml
+++ b/dts/Bindings/regulator/rohm,bd71847-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD71847 and BD71850 Power Management Integrated Circuit regulators
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   List of regulators provided by this controller. BD71847 regulators node
diff --git a/dts/Bindings/regulator/rohm,bd9576-regulator.yaml b/dts/Bindings/regulator/rohm,bd9576-regulator.yaml
index 7cb74cc8c5..89b8592db8 100644
--- a/dts/Bindings/regulator/rohm,bd9576-regulator.yaml
+++ b/dts/Bindings/regulator/rohm,bd9576-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD9576 and BD9573 Power Management Integrated Circuit regulators
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   This module is part of the ROHM BD9576 MFD device. For more details
@@ -21,7 +21,7 @@ description: |
   regulator-voutl1, regulator-vouts1
 
 patternProperties:
-  "regulator-.+":
+  "^regulator-.+$":
     type: object
     description:
       Properties for single regulator.
diff --git a/dts/Bindings/regulator/st,stm32-booster.yaml b/dts/Bindings/regulator/st,stm32-booster.yaml
index 38bdaef4fa..c82f6f885d 100644
--- a/dts/Bindings/regulator/st,stm32-booster.yaml
+++ b/dts/Bindings/regulator/st,stm32-booster.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/regulator/st,stm32-booster.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 booster for ADC analog input switches bindings
+title: STMicroelectronics STM32 booster for ADC analog input switches
 
 maintainers:
   - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
diff --git a/dts/Bindings/regulator/st,stm32-vrefbuf.yaml b/dts/Bindings/regulator/st,stm32-vrefbuf.yaml
index a5a27ee0a9..c1bf1f9049 100644
--- a/dts/Bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/dts/Bindings/regulator/st,stm32-vrefbuf.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/regulator/st,stm32-vrefbuf.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Voltage reference buffer bindings
+title: STMicroelectronics STM32 Voltage reference buffer
 
 description: |
   Some STM32 devices embed a voltage reference buffer which can be used as
diff --git a/dts/Bindings/regulator/ti,tps65219.yaml b/dts/Bindings/regulator/ti,tps65219.yaml
index 78be79930f..78e64521d4 100644
--- a/dts/Bindings/regulator/ti,tps65219.yaml
+++ b/dts/Bindings/regulator/ti,tps65219.yaml
@@ -51,13 +51,6 @@ properties:
       where the board has a button wired to the pin and triggers
       an interrupt on pressing it.
 
-patternProperties:
-  "^buck[1-3]-supply$":
-    description: Input supply phandle of one regulator.
-
-  "^ldo[1-4]-supply$":
-    description: Input supply phandle of one regulator.
-
   regulators:
     type: object
     description: |
@@ -82,6 +75,13 @@ patternProperties:
 
     additionalProperties: false
 
+patternProperties:
+  "^buck[1-3]-supply$":
+    description: Input supply phandle of one regulator.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle of one regulator.
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
index d892d29a65..11cb42a3fd 100644
--- a/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
+++ b/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Amlogic Meson AO ARC Remote Processor bindings
+title: Amlogic Meson AO ARC Remote Processor
 
 description:
   Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC core
diff --git a/dts/Bindings/remoteproc/fsl,imx-rproc.yaml b/dts/Bindings/remoteproc/fsl,imx-rproc.yaml
index 3a1f59ad79..ae2eab4452 100644
--- a/dts/Bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/dts/Bindings/remoteproc/fsl,imx-rproc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: NXP i.MX Co-Processor Bindings
+title: NXP i.MX Co-Processor
 
 description:
   This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs.
@@ -22,6 +22,8 @@ properties:
       - fsl,imx8mn-cm7
       - fsl,imx8mp-cm7
       - fsl,imx8mq-cm4
+      - fsl,imx8qm-cm4
+      - fsl,imx8qxp-cm4
       - fsl,imx8ulp-cm33
       - fsl,imx93-cm33
 
@@ -54,12 +56,26 @@ properties:
     minItems: 1
     maxItems: 32
 
+  power-domains:
+    maxItems: 8
+
   fsl,auto-boot:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
       Indicate whether need to load the default firmware and start the remote
       processor automatically.
 
+  fsl,entry-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specify CPU entry address for SCU enabled processor.
+
+  fsl,resource-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This property is to specify the resource id of the remote processor in SoC
+      which supports SCFW
+
 required:
   - compatible
 
diff --git a/dts/Bindings/remoteproc/ingenic,vpu.yaml b/dts/Bindings/remoteproc/ingenic,vpu.yaml
index aaaaabad46..85b1e43cab 100644
--- a/dts/Bindings/remoteproc/ingenic,vpu.yaml
+++ b/dts/Bindings/remoteproc/ingenic,vpu.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Ingenic Video Processing Unit bindings
+title: Ingenic Video Processing Unit
 
 description:
   Inside the Video Processing Unit (VPU) of the recent JZ47xx SoCs from
diff --git a/dts/Bindings/remoteproc/mtk,scp.yaml b/dts/Bindings/remoteproc/mtk,scp.yaml
index 7e091eaffc..895415772d 100644
--- a/dts/Bindings/remoteproc/mtk,scp.yaml
+++ b/dts/Bindings/remoteproc/mtk,scp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek SCP Bindings
+title: Mediatek SCP
 
 maintainers:
   - Tinghan Shen <tinghan.shen@mediatek.com>
diff --git a/dts/Bindings/remoteproc/qcom,adsp.yaml b/dts/Bindings/remoteproc/qcom,adsp.yaml
index db9e0f0c2b..c1d9cbc359 100644
--- a/dts/Bindings/remoteproc/qcom,adsp.yaml
+++ b/dts/Bindings/remoteproc/qcom,adsp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/remoteproc/qcom,adsp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm ADSP Peripheral Image Loader binding
+title: Qualcomm ADSP Peripheral Image Loader
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/dts/Bindings/remoteproc/qcom,pil-info.yaml b/dts/Bindings/remoteproc/qcom,pil-info.yaml
index a7711e3c99..22219d16df 100644
--- a/dts/Bindings/remoteproc/qcom,pil-info.yaml
+++ b/dts/Bindings/remoteproc/qcom,pil-info.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm peripheral image loader relocation info binding
+title: Qualcomm peripheral image loader relocation info
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
diff --git a/dts/Bindings/remoteproc/renesas,rcar-rproc.yaml b/dts/Bindings/remoteproc/renesas,rcar-rproc.yaml
index a7d25fa920..7e0275d31a 100644
--- a/dts/Bindings/remoteproc/renesas,rcar-rproc.yaml
+++ b/dts/Bindings/remoteproc/renesas,rcar-rproc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Renesas R-Car remote processor controller bindings
+title: Renesas R-Car remote processor controller
 
 maintainers:
   - Julien Massot <julien.massot@iot.bzh>
diff --git a/dts/Bindings/remoteproc/st,stm32-rproc.yaml b/dts/Bindings/remoteproc/st,stm32-rproc.yaml
index da50f0e99f..66b1e3efda 100644
--- a/dts/Bindings/remoteproc/st,stm32-rproc.yaml
+++ b/dts/Bindings/remoteproc/st,stm32-rproc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 remote processor controller bindings
+title: STMicroelectronics STM32 remote processor controller
 
 description:
   This document defines the binding for the remoteproc component that loads and
diff --git a/dts/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/dts/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
new file mode 100644
index 0000000000..9f677367dd
--- /dev/null
+++ b/dts/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/xlnx,zynqmp-r5fss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx R5F processor subsystem
+
+maintainers:
+  - Ben Levinsky <ben.levinsky@amd.com>
+  - Tanmay Shah <tanmay.shah@amd.com>
+
+description: |
+  The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
+  real-time processing based on the Cortex-R5F processor core from ARM.
+  The Cortex-R5F processor implements the Arm v7-R architecture and includes a
+  floating-point unit that implements the Arm VFPv3 instruction set.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-r5fss
+
+  xlnx,cluster-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description: |
+      The RPU MPCore can operate in split mode (Dual-processor performance), Safety
+      lock-step mode(Both RPU cores execute the same code in lock-step,
+      clock-for-clock) or Single CPU mode (RPU core 0 is held in reset while
+      core 1 runs normally). The processor does not support dynamic configuration.
+      Switching between modes is only permitted immediately after a processor reset.
+      If set to  1 then lockstep mode and if 0 then split mode.
+      If set to  2 then single CPU mode. When not defined, default will be lockstep mode.
+      In summary,
+      0: split mode
+      1: lockstep mode (default)
+      2: single cpu mode
+
+patternProperties:
+  "^r5f-[a-f0-9]+$":
+    type: object
+    description: |
+      The RPU is located in the Low Power Domain of the Processor Subsystem.
+      Each processor includes separate L1 instruction and data caches and
+      tightly coupled memories (TCM). System memory is cacheable, but the TCM
+      memory space is non-cacheable.
+
+      Each RPU contains one 64KB memory and two 32KB memories that
+      are accessed via the TCM A and B port interfaces, for a total of 128KB
+      per processor. In lock-step mode, the processor has access to 256KB of
+      TCM memory.
+
+    properties:
+      compatible:
+        const: xlnx,zynqmp-r5f
+
+      power-domains:
+        maxItems: 1
+
+      mboxes:
+        minItems: 1
+        items:
+          - description: mailbox channel to send data to RPU
+          - description: mailbox channel to receive data from RPU
+
+      mbox-names:
+        minItems: 1
+        items:
+          - const: tx
+          - const: rx
+
+      sram:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        minItems: 1
+        maxItems: 8
+        items:
+          maxItems: 1
+        description: |
+          phandles to one or more reserved on-chip SRAM regions. Other than TCM,
+          the RPU can execute instructions and access data from the OCM memory,
+          the main DDR memory, and other system memories.
+
+          The regions should be defined as child nodes of the respective SRAM
+          node, and should be defined as per the generic bindings in
+          Documentation/devicetree/bindings/sram/sram.yaml
+
+      memory-region:
+        description: |
+          List of phandles to the reserved memory regions associated with the
+          remoteproc device. This is variable and describes the memories shared with
+          the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+          vrings, ...). This reserved memory region will be allocated in DDR memory.
+        minItems: 1
+        maxItems: 8
+        items:
+          - description: region used for RPU firmware image section
+          - description: vdev buffer
+          - description: vring0
+          - description: vring1
+        additionalItems: true
+
+    required:
+      - compatible
+      - power-domains
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    remoteproc {
+        compatible = "xlnx,zynqmp-r5fss";
+        xlnx,cluster-mode = <1>;
+
+        r5f-0 {
+            compatible = "xlnx,zynqmp-r5f";
+            power-domains = <&zynqmp_firmware 0x7>;
+            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+            mbox-names = "tx", "rx";
+        };
+
+        r5f-1 {
+            compatible = "xlnx,zynqmp-r5f";
+            power-domains = <&zynqmp_firmware 0x8>;
+            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+            mbox-names = "tx", "rx";
+        };
+    };
+...
diff --git a/dts/Bindings/reserved-memory/shared-dma-pool.yaml b/dts/Bindings/reserved-memory/shared-dma-pool.yaml
index 618105f079..47696073b6 100644
--- a/dts/Bindings/reserved-memory/shared-dma-pool.yaml
+++ b/dts/Bindings/reserved-memory/shared-dma-pool.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reserved-memory/shared-dma-pool.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: /reserved-memory DMA pool node bindings
+title: /reserved-memory DMA pool
 
 maintainers:
   - devicetree-spec@vger.kernel.org
diff --git a/dts/Bindings/reset/ti,sci-reset.yaml b/dts/Bindings/reset/ti,sci-reset.yaml
index 4639d2cec5..dcf9206e12 100644
--- a/dts/Bindings/reset/ti,sci-reset.yaml
+++ b/dts/Bindings/reset/ti,sci-reset.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI reset controller node bindings
+title: TI-SCI reset controller
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/dts/Bindings/reset/ti,tps380x-reset.yaml b/dts/Bindings/reset/ti,tps380x-reset.yaml
index afc835eda0..f436f2cf1d 100644
--- a/dts/Bindings/reset/ti,tps380x-reset.yaml
+++ b/dts/Bindings/reset/ti,tps380x-reset.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI TPS380x reset controller node bindings
+title: TI TPS380x reset controller
 
 maintainers:
   - Marco Felsch <kernel@pengutronix.de>
diff --git a/dts/Bindings/riscv/cpus.yaml b/dts/Bindings/riscv/cpus.yaml
index 90a7cabf58..c6720764e7 100644
--- a/dts/Bindings/riscv/cpus.yaml
+++ b/dts/Bindings/riscv/cpus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/riscv/cpus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RISC-V bindings for 'cpus' DT nodes
+title: RISC-V CPUs
 
 maintainers:
   - Paul Walmsley <paul.walmsley@sifive.com>
@@ -28,17 +28,20 @@ properties:
     oneOf:
       - items:
           - enum:
-              - sifive,rocket0
+              - andestech,ax45mp
+              - canaan,k210
               - sifive,bullet0
               - sifive,e5
               - sifive,e7
               - sifive,e71
-              - sifive,u74-mc
-              - sifive,u54
-              - sifive,u74
+              - sifive,rocket0
               - sifive,u5
+              - sifive,u54
               - sifive,u7
-              - canaan,k210
+              - sifive,u74
+              - sifive,u74-mc
+              - thead,c906
+              - thead,c910
           - const: riscv
       - items:
           - enum:
diff --git a/dts/Bindings/riscv/starfive.yaml b/dts/Bindings/riscv/starfive.yaml
index 5b36243fd6..5d3fcee52d 100644
--- a/dts/Bindings/riscv/starfive.yaml
+++ b/dts/Bindings/riscv/starfive.yaml
@@ -19,7 +19,9 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: beagle,beaglev-starlight-jh7100-r0
+          - enum:
+              - beagle,beaglev-starlight-jh7100-r0
+              - starfive,visionfive-v1
           - const: starfive,jh7100
 
 additionalProperties: true
diff --git a/dts/Bindings/rng/ingenic,rng.yaml b/dts/Bindings/rng/ingenic,rng.yaml
index b2e4a6a7f9..79a023cbfd 100644
--- a/dts/Bindings/rng/ingenic,rng.yaml
+++ b/dts/Bindings/rng/ingenic,rng.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rng/ingenic,rng.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for RNG in Ingenic SoCs
+title: RNG in Ingenic SoCs
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
diff --git a/dts/Bindings/rng/ingenic,trng.yaml b/dts/Bindings/rng/ingenic,trng.yaml
index 044d9a0656..acaeb63caf 100644
--- a/dts/Bindings/rng/ingenic,trng.yaml
+++ b/dts/Bindings/rng/ingenic,trng.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rng/ingenic,trng.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for DTRNG in Ingenic SoCs
+title: DTRNG in Ingenic SoCs
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
diff --git a/dts/Bindings/rng/intel,ixp46x-rng.yaml b/dts/Bindings/rng/intel,ixp46x-rng.yaml
index 067e71e8eb..9f7590ce6b 100644
--- a/dts/Bindings/rng/intel,ixp46x-rng.yaml
+++ b/dts/Bindings/rng/intel,ixp46x-rng.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rng/intel,ixp46x-rng.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel IXP46x RNG bindings
+title: Intel IXP46x RNG
 
 description: |
   The Intel IXP46x has a random number generator at a fixed physical
diff --git a/dts/Bindings/rng/nuvoton,npcm-rng.yaml b/dts/Bindings/rng/nuvoton,npcm-rng.yaml
index abd134c9d4..e8e4ab1e5b 100644
--- a/dts/Bindings/rng/nuvoton,npcm-rng.yaml
+++ b/dts/Bindings/rng/nuvoton,npcm-rng.yaml
@@ -16,7 +16,9 @@ maintainers:
 
 properties:
   compatible:
-    const: nuvoton,npcm750-rng
+    enum:
+      - nuvoton,npcm750-rng
+      - nuvoton,npcm845-rng
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/rng/silex-insight,ba431-rng.yaml b/dts/Bindings/rng/silex-insight,ba431-rng.yaml
index 48ab82abf5..4673d6160a 100644
--- a/dts/Bindings/rng/silex-insight,ba431-rng.yaml
+++ b/dts/Bindings/rng/silex-insight,ba431-rng.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rng/silex-insight,ba431-rng.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Silex Insight BA431 RNG bindings
+title: Silex Insight BA431 RNG
 
 description: |
   The BA431 hardware random number generator is an IP that is FIPS-140-2/3
diff --git a/dts/Bindings/rng/st,stm32-rng.yaml b/dts/Bindings/rng/st,stm32-rng.yaml
index fcd86f822a..187b172d0c 100644
--- a/dts/Bindings/rng/st,stm32-rng.yaml
+++ b/dts/Bindings/rng/st,stm32-rng.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rng/st,stm32-rng.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 RNG bindings
+title: STMicroelectronics STM32 RNG
 
 description: |
   The STM32 hardware random number generator is a simple fixed purpose
diff --git a/dts/Bindings/rng/xiphera,xip8001b-trng.yaml b/dts/Bindings/rng/xiphera,xip8001b-trng.yaml
index 1e17e55762..d831322911 100644
--- a/dts/Bindings/rng/xiphera,xip8001b-trng.yaml
+++ b/dts/Bindings/rng/xiphera,xip8001b-trng.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rng/xiphera,xip8001b-trng.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xiphera XIP8001B-trng bindings
+title: Xiphera XIP8001B-trng
 
 maintainers:
   - Atte Tommiska <atte.tommiska@xiphera.com>
diff --git a/dts/Bindings/rtc/amlogic,meson6-rtc.yaml b/dts/Bindings/rtc/amlogic,meson6-rtc.yaml
new file mode 100644
index 0000000000..8bf7d3a9be
--- /dev/null
+++ b/dts/Bindings/rtc/amlogic,meson6-rtc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson6-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-rtc
+      - amlogic,meson8-rtc
+      - amlogic,meson8b-rtc
+      - amlogic,meson8m2-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc: rtc@740 {
+        compatible = "amlogic,meson6-rtc";
+        reg = <0x740 0x14>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&rtc32k_xtal>;
+        vdd-supply = <&rtc_vdd>;
+        resets = <&reset_rtc>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mac@0 {
+            reg = <0 6>;
+        };
+    };
diff --git a/dts/Bindings/rtc/epson,rx8900.yaml b/dts/Bindings/rtc/epson,rx8900.yaml
index d12855e7ff..1df7c45d95 100644
--- a/dts/Bindings/rtc/epson,rx8900.yaml
+++ b/dts/Bindings/rtc/epson,rx8900.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/epson,rx8900.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: EPSON RX8900 / Microcrystal RV8803 Real-Time Clock DT bindings
+title: EPSON RX8900 / Microcrystal RV8803 Real-Time Clock
 
 maintainers:
   - Marek Vasut <marex@denx.de>
diff --git a/dts/Bindings/rtc/fsl,scu-rtc.yaml b/dts/Bindings/rtc/fsl,scu-rtc.yaml
index 8c102b70d7..dd1b1abf1e 100644
--- a/dts/Bindings/rtc/fsl,scu-rtc.yaml
+++ b/dts/Bindings/rtc/fsl,scu-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/fsl,scu-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - RTC bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - RTC Based on SCU Message Protocol
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/rtc/haoyu,hym8563.txt b/dts/Bindings/rtc/haoyu,hym8563.txt
deleted file mode 100644
index a8934fe2ab..0000000000
--- a/dts/Bindings/rtc/haoyu,hym8563.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Haoyu Microelectronics HYM8563 Real Time Clock
-
-The HYM8563 provides basic rtc and alarm functionality
-as well as a clock output of up to 32kHz.
-
-Required properties:
-- compatible: should be: "haoyu,hym8563"
-- reg: i2c address
-- #clock-cells: the value should be 0
-
-Optional properties:
-- clock-output-names: From common clock binding
-- interrupts: rtc alarm/event interrupt
-
-Example:
-
-hym8563: hym8563@51 {
-	compatible = "haoyu,hym8563";
-	reg = <0x51>;
-
-	interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-
-	#clock-cells = <0>;
-};
-
-device {
-...
-	clocks = <&hym8563>;
-...
-};
diff --git a/dts/Bindings/rtc/haoyu,hym8563.yaml b/dts/Bindings/rtc/haoyu,hym8563.yaml
new file mode 100644
index 0000000000..0b9f39ef0e
--- /dev/null
+++ b/dts/Bindings/rtc/haoyu,hym8563.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/haoyu,hym8563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Haoyu Microelectronics HYM8563 RTC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: haoyu,hym8563
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    description: From common clock binding to override the default output clock name.
+    maxItems: 1
+
+  wakeup-source:
+    description: Enables wake up of host system on alarm.
+
+allOf:
+  - $ref: rtc.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "haoyu,hym8563";
+            reg = <0x51>;
+            interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+            #clock-cells = <0>;
+        };
+    };
diff --git a/dts/Bindings/rtc/ingenic,rtc.yaml b/dts/Bindings/rtc/ingenic,rtc.yaml
index b235b24419..af78b67b3d 100644
--- a/dts/Bindings/rtc/ingenic,rtc.yaml
+++ b/dts/Bindings/rtc/ingenic,rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs Real-Time Clock DT bindings
+title: Ingenic SoCs Real-Time Clock
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml b/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml
index 23ab5bb4f3..0a7aa29563 100644
--- a/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ b/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -11,12 +11,16 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8058-rtc
-      - qcom,pm8921-rtc
-      - qcom,pm8941-rtc
-      - qcom,pm8018-rtc
-      - qcom,pmk8350-rtc
+    oneOf:
+      - enum:
+          - qcom,pm8058-rtc
+          - qcom,pm8921-rtc
+          - qcom,pm8941-rtc
+          - qcom,pmk8350-rtc
+      - items:
+          - enum:
+              - qcom,pm8018-rtc
+          - const: qcom,pm8921-rtc
 
   reg:
     minItems: 1
diff --git a/dts/Bindings/rtc/renesas,rzn1-rtc.yaml b/dts/Bindings/rtc/renesas,rzn1-rtc.yaml
index 2d4741f516..f6e0c613af 100644
--- a/dts/Bindings/rtc/renesas,rzn1-rtc.yaml
+++ b/dts/Bindings/rtc/renesas,rzn1-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/renesas,rzn1-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/N1 SoCs Real-Time Clock DT bindings
+title: Renesas RZ/N1 SoCs Real-Time Clock
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
diff --git a/dts/Bindings/rtc/rtc-m41t80.txt b/dts/Bindings/rtc/rtc-m41t80.txt
deleted file mode 100644
index cdd196b1e9..0000000000
--- a/dts/Bindings/rtc/rtc-m41t80.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ST M41T80 family of RTC and compatible
-
-Required properties:
-- compatible: should be one of:
-	"st,m41t62",
-	"st,m41t65",
-	"st,m41t80",
-	"st,m41t81",
-	"st,m41t81s",
-	"st,m41t82",
-	"st,m41t83",
-	"st,m41t84",
-	"st,m41t85",
-	"st,m41t87",
-	"microcrystal,rv4162",
-- reg: I2C bus address of the device
-
-Optional properties:
-- interrupts: rtc alarm interrupt.
-- clock-output-names: From common clock binding to override the default output
-                      clock name
-- wakeup-source: Enables wake up of host system on alarm
-
-Optional child node:
-- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
-
-Example:
-	rtc@68 {
-		compatible = "st,m41t80";
-		reg = <0x68>;
-		interrupt-parent = <&UIC0>;
-		interrupts = <0x9 0x8>;
-
-		clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
diff --git a/dts/Bindings/rtc/rtc-meson.txt b/dts/Bindings/rtc/rtc-meson.txt
deleted file mode 100644
index e921fe66a3..0000000000
--- a/dts/Bindings/rtc/rtc-meson.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC
-
-Required properties:
-- compatible: should be one of the following describing the hardware:
-	* "amlogic,meson6-rtc"
-	* "amlogic,meson8-rtc"
-	* "amlogic,meson8b-rtc"
-	* "amlogic,meson8m2-rtc"
-
-- reg: physical register space for the controller's memory mapped registers.
-- interrupts: the interrupt line of the RTC block.
-- clocks: reference to the external 32.768kHz crystal oscillator.
-- vdd-supply: reference to the power supply of the RTC block.
-- resets: reset controller reference to allow reset of the controller
-
-Optional properties for the battery-backed non-volatile memory:
-- #address-cells: should be 1 to address the battery-backed non-volatile memory
-- #size-cells: should be 1 to reference the battery-backed non-volatile memory
-
-Optional child nodes:
-- see ../nvmem/nvmem.txt
-
-Example:
-
-	rtc: rtc@740 {
-		compatible = "amlogic,meson6-rtc";
-		reg = <0x740 0x14>;
-		interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&rtc32k_xtal>;
-		vdd-supply = <&rtc_vdd>;
-		resets = <&reset RESET_RTC>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
diff --git a/dts/Bindings/rtc/rtc.yaml b/dts/Bindings/rtc/rtc.yaml
index 0ec3551f12..c6fff5486f 100644
--- a/dts/Bindings/rtc/rtc.yaml
+++ b/dts/Bindings/rtc/rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RTC Generic Binding
+title: Real Time Clock Common Properties
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
diff --git a/dts/Bindings/rtc/sa1100-rtc.yaml b/dts/Bindings/rtc/sa1100-rtc.yaml
index 482e5af215..b04b87ef6f 100644
--- a/dts/Bindings/rtc/sa1100-rtc.yaml
+++ b/dts/Bindings/rtc/sa1100-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/sa1100-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell Real Time Clock controller bindings
+title: Marvell Real Time Clock controller
 
 allOf:
   - $ref: rtc.yaml#
diff --git a/dts/Bindings/rtc/st,m41t80.yaml b/dts/Bindings/rtc/st,m41t80.yaml
new file mode 100644
index 0000000000..fc9c6da648
--- /dev/null
+++ b/dts/Bindings/rtc/st,m41t80.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,m41t80.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST M41T80 family of RTC and compatible
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - st,m41t62
+      - st,m41t65
+      - st,m41t80
+      - st,m41t81
+      - st,m41t81s
+      - st,m41t82
+      - st,m41t83
+      - st,m41t84
+      - st,m41t85
+      - st,m41t87
+      - microcrystal,rv4162
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 1
+    description: From common clock binding to override the default output clock name.
+
+  clock:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 32768
+
+allOf:
+  - $ref: rtc.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rtc@68 {
+        compatible = "st,m41t80";
+        reg = <0x68>;
+        interrupt-parent = <&UIC0>;
+        interrupts = <0x9 0x8>;
+
+        clock {
+          compatible = "fixed-clock";
+          #clock-cells = <0>;
+          clock-frequency = <32768>;
+        };
+      };
+    };
diff --git a/dts/Bindings/rtc/st,stm32-rtc.yaml b/dts/Bindings/rtc/st,stm32-rtc.yaml
index 764717ce18..9e66ed33cd 100644
--- a/dts/Bindings/rtc/st,stm32-rtc.yaml
+++ b/dts/Bindings/rtc/st,stm32-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/st,stm32-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Real Time Clock Bindings
+title: STMicroelectronics STM32 Real Time Clock
 
 maintainers:
   - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
diff --git a/dts/Bindings/serial/8250.yaml b/dts/Bindings/serial/8250.yaml
index 6258f5f59b..34b8e59aa9 100644
--- a/dts/Bindings/serial/8250.yaml
+++ b/dts/Bindings/serial/8250.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serial/8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: UART (Universal Asynchronous Receiver/Transmitter) bindings
+title: UART (Universal Asynchronous Receiver/Transmitter)
 
 maintainers:
   - devicetree@vger.kernel.org
diff --git a/dts/Bindings/serial/8250_omap.yaml b/dts/Bindings/serial/8250_omap.yaml
index 7b34ec8fa9..53dc1212ad 100644
--- a/dts/Bindings/serial/8250_omap.yaml
+++ b/dts/Bindings/serial/8250_omap.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs
+title: 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs
 
 maintainers:
   - Vignesh Raghavendra <vigneshr@ti.com>
diff --git a/dts/Bindings/serial/brcm,bcm7271-uart.yaml b/dts/Bindings/serial/brcm,bcm7271-uart.yaml
index 6d176588df..89c462653e 100644
--- a/dts/Bindings/serial/brcm,bcm7271-uart.yaml
+++ b/dts/Bindings/serial/brcm,bcm7271-uart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serial/brcm,bcm7271-uart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom 8250 based serial port devicetree bindings
+title: Broadcom 8250 based serial port
 
 maintainers:
   - Al Cooper <alcooperx@gmail.com>
diff --git a/dts/Bindings/serial/fsl-lpuart.yaml b/dts/Bindings/serial/fsl-lpuart.yaml
index 30eaa62e1a..74f75f669e 100644
--- a/dts/Bindings/serial/fsl-lpuart.yaml
+++ b/dts/Bindings/serial/fsl-lpuart.yaml
@@ -32,6 +32,9 @@ properties:
               - fsl,imx8qm-lpuart
               - fsl,imx8dxl-lpuart
           - const: fsl,imx8qxp-lpuart
+      - items:
+          - const: fsl,imxrt1050-lpuart
+          - const: fsl,imxrt1170-lpuart
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/serial/ingenic,uart.yaml b/dts/Bindings/serial/ingenic,uart.yaml
index 9ca7a18ecd..d5f153bdeb 100644
--- a/dts/Bindings/serial/ingenic,uart.yaml
+++ b/dts/Bindings/serial/ingenic,uart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serial/ingenic,uart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs UART controller devicetree bindings
+title: Ingenic SoCs UART controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -20,6 +20,7 @@ properties:
     oneOf:
       - enum:
           - ingenic,jz4740-uart
+          - ingenic,jz4750-uart
           - ingenic,jz4760-uart
           - ingenic,jz4780-uart
           - ingenic,x1000-uart
@@ -31,6 +32,9 @@ properties:
       - items:
           - const: ingenic,jz4725b-uart
           - const: ingenic,jz4740-uart
+      - items:
+          - const: ingenic,jz4755-uart
+          - const: ingenic,jz4750-uart
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/serial/renesas,scif.yaml b/dts/Bindings/serial/renesas,scif.yaml
index f930e7f134..f81f2d67a1 100644
--- a/dts/Bindings/serial/renesas,scif.yaml
+++ b/dts/Bindings/serial/renesas,scif.yaml
@@ -67,6 +67,7 @@ properties:
           - enum:
               - renesas,scif-r8a779a0     # R-Car V3U
               - renesas,scif-r8a779f0     # R-Car S4-8
+              - renesas,scif-r8a779g0     # R-Car V4H
           - const: renesas,rcar-gen4-scif # R-Car Gen4
           - const: renesas,scif           # generic SCIF compatible UART
 
diff --git a/dts/Bindings/serial/rs485.yaml b/dts/Bindings/serial/rs485.yaml
index 90a1bab40f..789763cf42 100644
--- a/dts/Bindings/serial/rs485.yaml
+++ b/dts/Bindings/serial/rs485.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serial/rs485.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RS485 serial communications Bindings
+title: RS485 serial communications
 
 description: The RTS signal is capable of automatically controlling line
   direction for the built-in half-duplex mode. The properties described
diff --git a/dts/Bindings/serial/serial.yaml b/dts/Bindings/serial/serial.yaml
index c75ba3fb64..11e822bf09 100644
--- a/dts/Bindings/serial/serial.yaml
+++ b/dts/Bindings/serial/serial.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/serial/serial.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Serial Interface Generic DT Bindings
+title: Serial Interface Generic
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/dts/Bindings/serial/st,stm32-uart.yaml b/dts/Bindings/serial/st,stm32-uart.yaml
index 333dc42722..85876c668f 100644
--- a/dts/Bindings/serial/st,stm32-uart.yaml
+++ b/dts/Bindings/serial/st,stm32-uart.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 maintainers:
   - Erwan Le Ray <erwan.leray@foss.st.com>
 
-title: STMicroelectronics STM32 USART bindings
+title: STMicroelectronics STM32 USART
 
 properties:
   compatible:
diff --git a/dts/Bindings/serial/xlnx,opb-uartlite.yaml b/dts/Bindings/serial/xlnx,opb-uartlite.yaml
index f7617b88c7..2f4390e8d4 100644
--- a/dts/Bindings/serial/xlnx,opb-uartlite.yaml
+++ b/dts/Bindings/serial/xlnx,opb-uartlite.yaml
@@ -67,8 +67,7 @@ allOf:
   - if:
       properties:
         xlnx,use-parity:
-          contains:
-            const: 1
+          const: 1
     then:
       required:
         - xlnx,odd-parity
diff --git a/dts/Bindings/serio/ps2-gpio.yaml b/dts/Bindings/serio/ps2-gpio.yaml
index a63d917234..99848bc34f 100644
--- a/dts/Bindings/serio/ps2-gpio.yaml
+++ b/dts/Bindings/serio/ps2-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serio/ps2-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for GPIO based PS/2
+title: GPIO based PS/2
 
 maintainers:
   - Danilo Krummrich <danilokrummrich@dk-develop.de>
diff --git a/dts/Bindings/slimbus/bus.txt b/dts/Bindings/slimbus/bus.txt
deleted file mode 100644
index bbe871f82a..0000000000
--- a/dts/Bindings/slimbus/bus.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-SLIM(Serial Low Power Interchip Media Bus) bus
-
-SLIMbus is a 2-wire bus, and is used to communicate with peripheral
-components like audio-codec.
-
-Required property for SLIMbus controller node:
-- compatible	- name of SLIMbus controller
-
-Child nodes:
-Every SLIMbus controller node can contain zero or more child nodes
-representing slave devices on the bus. Every SLIMbus slave device is
-uniquely determined by the enumeration address containing 4 fields:
-Manufacturer ID, Product code, Device index, and Instance value for
-the device.
-If child node is not present and it is instantiated after device
-discovery (slave device reporting itself present).
-
-In some cases it may be necessary to describe non-probeable device
-details such as non-standard ways of powering up a device. In
-such cases, child nodes for those devices will be present as
-slaves of the SLIMbus controller, as detailed below.
-
-Required property for SLIMbus child node if it is present:
-- reg		- Should be ('Device index', 'Instance ID') from SLIMbus
-		  Enumeration  Address.
-		  Device Index Uniquely identifies multiple Devices within
-		  a single Component.
-		  Instance ID Is for the cases where multiple Devices of the
-		  same type or Class are attached to the bus.
-
-- compatible	-"slimMID,PID". The textual representation of Manufacturer ID,
-	 	  Product Code, shall be in lower case hexadecimal with leading
-		  zeroes suppressed
-
-Optional property for SLIMbus child node if it is present:
-- slim-ifc-dev	- Should be phandle to SLIMBus Interface device.
-		  Required for devices which deal with streams.
-
-SLIMbus example for Qualcomm's slimbus manager component:
-
-	slim@28080000 {
-		compatible = "qcom,apq8064-slim", "qcom,slim";
-		reg = <0x28080000 0x2000>,
-		interrupts = <0 33 0>;
-		clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
-		clock-names = "iface", "core";
-		#address-cells = <2>;
-		#size-cell = <0>;
-
-		codec_ifd: ifd@0,0{
-			compatible = "slim217,60";
-			reg = <0 0>;
-		};
-
-		codec: wcd9310@1,0{
-			compatible = "slim217,60";
-			reg = <1 0>;
-			slim-ifc-dev  = <&codec_ifd>;
-		};
-	};
diff --git a/dts/Bindings/slimbus/qcom,slim-ngd.yaml b/dts/Bindings/slimbus/qcom,slim-ngd.yaml
new file mode 100644
index 0000000000..abf61c1524
--- /dev/null
+++ b/dts/Bindings/slimbus/qcom,slim-ngd.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMBus NGD controller is a light-weight driver responsible for communicating
+  with SLIMBus slaves directly over the bus using messaging interface and
+  communicating with master component residing on ADSP for bandwidth and
+  data-channel management
+
+properties:
+  compatible:
+    enum:
+      - qcom,slim-ngd-v1.5.0        # for MSM8996
+      - qcom,slim-ngd-v2.1.0        # for SDM845
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^slim@[0-9a-f]+$":
+    type: object
+    $ref: slimbus.yaml#
+    description:
+      Each subnode represents an instance of NGD
+
+    properties:
+      reg:
+        maxItems: 1
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - dmas
+  - dma-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    slim-ngd@171c0000 {
+        compatible = "qcom,slim-ngd-v2.1.0";
+        reg = <0x171c0000 0x2c000>;
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+
+        dmas = <&slimbam 3>, <&slimbam 4>;
+        dma-names = "rx", "tx";
+        iommus = <&apps_smmu 0x1806 0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        slim@1 {
+            reg = <1>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            codec@1,0 {
+                compatible = "slim217,250";
+                reg = <1 0>;
+                slim-ifc-dev = <&wcd9340_ifd>;
+
+                #sound-dai-cells = <1>;
+
+                interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-controller;
+                #interrupt-cells = <1>;
+
+                #clock-cells = <0>;
+                clock-frequency = <9600000>;
+                clock-output-names = "mclk";
+                qcom,micbias1-microvolt = <1800000>;
+                qcom,micbias2-microvolt = <1800000>;
+                qcom,micbias3-microvolt = <1800000>;
+                qcom,micbias4-microvolt = <1800000>;
+
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+
+                /* Rest of the WCD9340 codec */
+            };
+        };
+    };
diff --git a/dts/Bindings/slimbus/qcom,slim.yaml b/dts/Bindings/slimbus/qcom,slim.yaml
new file mode 100644
index 0000000000..883bda58ca
--- /dev/null
+++ b/dts/Bindings/slimbus/qcom,slim.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/qcom,slim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC SLIMbus controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMbus controller used when applications processor controls SLIMbus master
+  component.
+
+allOf:
+  - $ref: slimbus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-slim
+      - const: qcom,slim
+
+  reg:
+    items:
+      - description: Physical address of controller register blocks
+      - description: SLEW RATE register
+
+  reg-names:
+    items:
+      - const: ctrl
+      - const: slew
+
+  clocks:
+    items:
+      - description: Interface clock for this controller
+      - description: Interrupt for controller core's BAM
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/clock/qcom,lcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        slim@28080000 {
+            compatible = "qcom,apq8064-slim", "qcom,slim";
+            reg = <0x28080000 0x2000>, <0x80207c 4>;
+            reg-names = "ctrl", "slew";
+            interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+            clock-names = "iface", "core";
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            audio-codec@1,0 {
+                compatible = "slim217,60";
+                reg = <1 0>;
+            };
+        };
+    };
diff --git a/dts/Bindings/slimbus/slim-ngd-qcom-ctrl.txt b/dts/Bindings/slimbus/slim-ngd-qcom-ctrl.txt
deleted file mode 100644
index e94a2ad3a7..0000000000
--- a/dts/Bindings/slimbus/slim-ngd-qcom-ctrl.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Qualcomm SLIMBus Non Generic Device (NGD) Controller binding
-
-SLIMBus NGD controller is a light-weight driver responsible for communicating
-with SLIMBus slaves directly over the bus using messaging interface and
-communicating with master component residing on ADSP for bandwidth and
-data-channel management
-
-Please refer to slimbus/bus.txt for details of the common SLIMBus bindings.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,slim-ngd-v<MAJOR>.<MINOR>.<STEP>"
-	must be one of the following.
-	"qcom,slim-ngd-v1.5.0" for MSM8996
-	"qcom,slim-ngd-v2.1.0" for SDM845
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the controller
-		    register space.
-- dmas
-	Usage: required
-	Value type: <array of phandles>
-	Definition: List of rx and tx dma channels
-
-- dma-names
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "rx" and "tx".
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must list controller IRQ.
-
-#address-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 1, reflecting the instance id of ngd.
-
-#size-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 0
-
-= NGD Devices
-Each subnode represents an instance of NGD, must contain the following
-properties:
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be instance id of ngd.
-
-#address-cells
-	Usage: required
-	Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
-
-#size-cells
-	Usage: required
-	Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
-
-= EXAMPLE
-
-slim@91c0000 {
-	compatible = "qcom,slim-ngd-v1.5.0";
-	reg = <0x91c0000 0x2c000>;
-	interrupts = <0 163 0>;
-	dmas =	<&slimbam 3>, <&slimbam 4>;
-	dma-names = "rx", "tx";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	ngd@1 {
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		codec@1 {
-			compatible = "slim217,1a0";
-			reg  = <1 0>;
-		};
-	};
-};
diff --git a/dts/Bindings/slimbus/slim-qcom-ctrl.txt b/dts/Bindings/slimbus/slim-qcom-ctrl.txt
deleted file mode 100644
index 922dcb8ff2..0000000000
--- a/dts/Bindings/slimbus/slim-qcom-ctrl.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Qualcomm SLIMbus controller
-This controller is used if applications processor driver controls SLIMbus
-master component.
-
-Required properties:
-
- - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
- - #size-cells	- refer to Documentation/devicetree/bindings/slimbus/bus.txt
-
- - reg : Offset and length of the register region(s) for the device
- - reg-names : Register region name(s) referenced in reg above
-	 Required register resource entries are:
-	 "ctrl": Physical address of controller register blocks
- 	 "slew": required for "qcom,apq8064-slim" SOC.
- - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
- 		followed by "qcom,slim" for fallback.
- - interrupts : Interrupt number used by this controller
- - clocks : Interface and core clocks used by this SLIMbus controller
- - clock-names : Required clock-name entries are:
-	"iface" : Interface clock for this controller
-	"core" : Interrupt for controller core's BAM
-
-Example:
-
-	slim@28080000 {
-		compatible = "qcom,apq8064-slim", "qcom,slim";
-		reg = <0x28080000 0x2000>, <0x80207C 4>;
-		reg-names = "ctrl", "slew";
-		interrupts = <0 33 0>;
-		clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
-		clock-names = "iface", "core";
-		#address-cells = <2>;
-		#size-cell = <0>;
-
-		wcd9310: audio-codec@1,0{
-			compatible = "slim217,60";
-			reg = <1 0>;
-		};
-	};
diff --git a/dts/Bindings/slimbus/slimbus.yaml b/dts/Bindings/slimbus/slimbus.yaml
new file mode 100644
index 0000000000..22513fb7c5
--- /dev/null
+++ b/dts/Bindings/slimbus/slimbus.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/slimbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SLIM (Serial Low Power Interchip Media) bus
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMbus is a 2-wire bus, and is used to communicate with peripheral
+  components like audio-codec.
+
+properties:
+  $nodename:
+    pattern: "^slim(@.*|-[0-9a-f])*$"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f]+,[0-9a-f]+$":
+    type: object
+    description: |
+      Every SLIMbus controller node can contain zero or more child nodes
+      representing slave devices on the bus. Every SLIMbus slave device is
+      uniquely determined by the enumeration address containing 4 fields::
+      Manufacturer ID, Product code, Device index, and Instance value for the
+      device.
+
+      If child node is not present and it is instantiated after device
+      discovery (slave device reporting itself present).
+
+      In some cases it may be necessary to describe non-probeable device
+      details such as non-standard ways of powering up a device. In such cases,
+      child nodes for those devices will be present as slaves of the SLIMbus
+      controller.
+
+    properties:
+      compatible:
+        pattern: "^slim[0-9a-f]+,[0-9a-f]+$"
+
+      reg:
+        maxItems: 1
+        description: |
+          Pair of (device index, instande ID), where::
+           - Device index, which uniquely identifies multiple devices within a
+             single component.
+           - Instance ID, can be used for the cases where multiple devices of
+             the same type or class are attached to the bus.
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: true
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/clock/qcom,lcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        slim@28080000 {
+            compatible = "qcom,apq8064-slim", "qcom,slim";
+            reg = <0x28080000 0x2000>, <0x80207c 4>;
+            reg-names = "ctrl", "slew";
+            interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+            clock-names = "iface", "core";
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            audio-codec@1,0 {
+                compatible = "slim217,60";
+                reg = <1 0>;
+            };
+        };
+    };
diff --git a/dts/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/dts/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml
new file mode 100644
index 0000000000..8e6ba2ec8a
--- /dev/null
+++ b/dts/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt7986-wo-ccif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Wireless Ethernet Dispatch (WED) WO controller interface for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The MediaTek wo-ccif provides a configuration interface for WED WO
+  controller used to perfrom offload rx packet processing (e.g. 802.11
+  aggregation packet reordering or rx header translation) on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wo-ccif
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      syscon@151a5000 {
+        compatible = "mediatek,mt7986-wo-ccif", "syscon";
+        reg = <0 0x151a5000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/dts/Bindings/soc/mediatek/mtk-svs.yaml b/dts/Bindings/soc/mediatek/mtk-svs.yaml
index d911fa2d40..f21eb907ee 100644
--- a/dts/Bindings/soc/mediatek/mtk-svs.yaml
+++ b/dts/Bindings/soc/mediatek/mtk-svs.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek Smart Voltage Scaling (SVS) Device Tree Bindings
+title: MediaTek Smart Voltage Scaling (SVS)
 
 maintainers:
   - Roger Lu <roger.lu@mediatek.com>
diff --git a/dts/Bindings/soc/mediatek/pwrap.txt b/dts/Bindings/soc/mediatek/pwrap.txt
index d24e2bc444..12e4b4260b 100644
--- a/dts/Bindings/soc/mediatek/pwrap.txt
+++ b/dts/Bindings/soc/mediatek/pwrap.txt
@@ -30,6 +30,7 @@ Required properties in pwrap device node.
 	"mediatek,mt8186-pwrap" for MT8186 SoCs
 	"mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
 	"mediatek,mt8195-pwrap" for MT8195 SoCs
+	"mediatek,mt8365-pwrap" for MT8365 SoCs
 	"mediatek,mt8516-pwrap" for MT8516 SoCs
 - interrupts: IRQ for pwrap in SOC
 - reg-names: "pwrap" is required; "pwrap-bridge" is optional.
@@ -39,6 +40,8 @@ Required properties in pwrap device node.
 - clock-names: Must include the following entries:
   "spi": SPI bus clock
   "wrap": Main module clock
+  "sys": Optional system module clock
+  "tmr": Optional timer module clock
 - clocks: Must contain an entry for each entry in clock-names.
 
 Optional properities:
diff --git a/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml
index a4eeb7e158..ab607efbb6 100644
--- a/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Always-On Subsystem side channel binding
+title: Qualcomm Always-On Subsystem side channel
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -28,12 +28,14 @@ properties:
           - qcom,sc7180-aoss-qmp
           - qcom,sc7280-aoss-qmp
           - qcom,sc8180x-aoss-qmp
+          - qcom,sc8280xp-aoss-qmp
           - qcom,sdm845-aoss-qmp
           - qcom,sm6350-aoss-qmp
           - qcom,sm8150-aoss-qmp
           - qcom,sm8250-aoss-qmp
           - qcom,sm8350-aoss-qmp
           - qcom,sm8450-aoss-qmp
+          - qcom,sm8550-aoss-qmp
       - const: qcom,aoss-qmp
 
   reg:
diff --git a/dts/Bindings/soc/qcom/qcom,apr-services.yaml b/dts/Bindings/soc/qcom/qcom,apr-services.yaml
new file mode 100644
index 0000000000..290555426c
--- /dev/null
+++ b/dts/Bindings/soc/qcom/qcom,apr-services.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APR/GPR services shared parts
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic
+  Packet Router).
+
+properties:
+  reg:
+    minimum: 1
+    maximum: 13
+    description: |
+      APR Service ID
+        3 = DSP Core Service
+        4 = Audio  Front End Service.
+        5 = Voice Stream Manager Service.
+        6 = Voice processing manager.
+        7 = Audio Stream Manager Service.
+        8 = Audio Device Manager Service.
+        9 = Multimode voice manager.
+        10 = Core voice stream.
+        11 = Core voice processor.
+        12 = Ultrasound stream manager.
+        13 = Listen stream manager.
+      GPR Service ID
+        1 = Audio Process Manager Service
+        2 = Proxy Resource Manager Service.
+        3 = AMDB Service.
+        4 = Voice processing manager.
+
+  qcom,protection-domain:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Protection domain service name and path for APR service
+      possible values are::
+      "avs/audio", "msm/adsp/audio_pd".
+      "kernel/elf_loader", "msm/modem/wlan_pd".
+      "tms/servreg", "msm/adsp/audio_pd".
+      "tms/servreg", "msm/modem/wlan_pd".
+      "tms/servreg", "msm/slpi/sensor_pd".
+
+required:
+  - reg
+  - qcom,protection-domain
+
+additionalProperties: true
diff --git a/dts/Bindings/soc/qcom/qcom,apr.yaml b/dts/Bindings/soc/qcom/qcom,apr.yaml
index f47491aab3..6026c21736 100644
--- a/dts/Bindings/soc/qcom/qcom,apr.yaml
+++ b/dts/Bindings/soc/qcom/qcom,apr.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) binding
+title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -17,6 +17,7 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,apr
       - qcom,apr-v2
       - qcom,gpr
 
@@ -58,8 +59,7 @@ properties:
   qcom,glink-channels:
     $ref: /schemas/types.yaml#/definitions/string-array
     description: Channel name used for the communication
-    items:
-      - const: apr_audio_svc
+    maxItems: 1
 
   qcom,intents:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -81,12 +81,13 @@ properties:
   '#size-cells':
     const: 0
 
-#APR/GPR Services
 patternProperties:
   "^service@[1-9a-d]$":
     type: object
+    $ref: /schemas/soc/qcom/qcom,apr-services.yaml
+    additionalProperties: true
     description:
-      APR/GPR node's client devices use subnodes for desired static port services.
+      APR/GPR static port services.
 
     properties:
       compatible:
@@ -98,99 +99,6 @@ patternProperties:
           - qcom,q6apm
           - qcom,q6prm
 
-      reg:
-        minimum: 1
-        maximum: 13
-        description:
-          APR Service ID
-            3 = DSP Core Service
-            4 = Audio  Front End Service.
-            5 = Voice Stream Manager Service.
-            6 = Voice processing manager.
-            7 = Audio Stream Manager Service.
-            8 = Audio Device Manager Service.
-            9 = Multimode voice manager.
-            10 = Core voice stream.
-            11 = Core voice processor.
-            12 = Ultrasound stream manager.
-            13 = Listen stream manager.
-          GPR Service ID
-            1 = Audio Process Manager Service
-            2 = Proxy Resource Manager Service.
-            3 = AMDB Service.
-            4 = Voice processing manager.
-
-      clock-controller:
-        $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
-        description: Qualcomm DSP LPASS clock controller
-        unevaluatedProperties: false
-
-      dais:
-        type: object
-        oneOf:
-          - $ref: /schemas/sound/qcom,q6apm-dai.yaml#
-          - $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml#
-          - $ref: /schemas/sound/qcom,q6asm-dais.yaml#
-        unevaluatedProperties: false
-        description: Qualcomm DSP audio ports
-
-      routing:
-        type: object
-        $ref: /schemas/sound/qcom,q6adm-routing.yaml#
-        unevaluatedProperties: false
-        description: Qualcomm DSP LPASS audio routing
-
-      qcom,protection-domain:
-        $ref: /schemas/types.yaml#/definitions/string-array
-        description: protection domain service name and path for apr service
-          possible values are
-          "avs/audio", "msm/adsp/audio_pd".
-          "kernel/elf_loader", "msm/modem/wlan_pd".
-          "tms/servreg", "msm/adsp/audio_pd".
-          "tms/servreg", "msm/modem/wlan_pd".
-          "tms/servreg", "msm/slpi/sensor_pd".
-
-    allOf:
-      - if:
-          properties:
-            compatible:
-              enum:
-                - qcom,q6afe
-        then:
-          properties:
-            dais:
-              properties:
-                compatible:
-                  const: qcom,q6afe-dais
-
-      - if:
-          properties:
-            compatible:
-              enum:
-                - qcom,q6apm
-        then:
-          properties:
-            dais:
-              properties:
-                compatible:
-                  enum:
-                    - qcom,q6apm-dais
-                    - qcom,q6apm-lpass-dais
-
-      - if:
-          properties:
-            compatible:
-              enum:
-                - qcom,q6asm
-        then:
-          properties:
-            dais:
-              properties:
-                compatible:
-                  const: qcom,q6asm-dais
-
-    additionalProperties: false
-
 required:
   - compatible
   - qcom,domain
@@ -203,7 +111,15 @@ allOf:
             - qcom,gpr
     then:
       properties:
+        qcom,glink-channels:
+          items:
+            - const: adsp_apps
         power-domains: false
+    else:
+      properties:
+        qcom,glink-channels:
+          items:
+            - const: apr_audio_svc
 
   - if:
       required:
@@ -227,31 +143,35 @@ examples:
     apr {
         compatible = "qcom,apr-v2";
         qcom,domain = <APR_DOMAIN_ADSP>;
+        qcom,glink-channels = "apr_audio_svc";
+        qcom,intents = <512 20>;
         #address-cells = <1>;
         #size-cells = <0>;
 
         q6core: service@3 {
-          compatible = "qcom,q6core";
-          reg = <APR_SVC_ADSP_CORE>;
-          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-        };
-
-        q6afe: service@4 {
-          compatible = "qcom,q6afe";
-          reg = <APR_SVC_AFE>;
-          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-        };
-
-        q6asm: service@7 {
-          compatible = "qcom,q6asm";
-          reg = <APR_SVC_ASM>;
-          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+            compatible = "qcom,q6core";
+            reg = <APR_SVC_ADSP_CORE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
         };
 
-        q6adm: service@8 {
-          compatible = "qcom,q6adm";
-          reg = <APR_SVC_ADM>;
-          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        service@4 {
+            compatible = "qcom,q6afe";
+            reg = <APR_SVC_AFE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6afe-clocks";
+                #clock-cells = <2>;
+            };
+
+            dais {
+                compatible = "qcom,q6afe-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+                /* ... */
+            };
+            /* ... */
         };
     };
 
@@ -260,12 +180,25 @@ examples:
     gpr {
         compatible = "qcom,gpr";
         qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        qcom,glink-channels = "adsp_apps";
+        qcom,intents = <512 20>;
         #address-cells = <1>;
         #size-cells = <0>;
 
         service@1 {
-          compatible = "qcom,q6apm";
-          reg = <GPR_APM_MODULE_IID>;
-          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+            compatible = "qcom,q6apm";
+            reg = <GPR_APM_MODULE_IID>;
+            #sound-dai-cells = <0>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6apm-dais";
+                iommus = <&apps_smmu 0x1801 0x0>;
+            };
+
+            bedais {
+                compatible = "qcom,q6apm-lpass-dais";
+                #sound-dai-cells = <1>;
+            };
         };
     };
diff --git a/dts/Bindings/soc/qcom/qcom,geni-se.yaml b/dts/Bindings/soc/qcom/qcom,geni-se.yaml
index 2bf5293fc9..ab4df02052 100644
--- a/dts/Bindings/soc/qcom/qcom,geni-se.yaml
+++ b/dts/Bindings/soc/qcom/qcom,geni-se.yaml
@@ -21,20 +21,19 @@ properties:
   compatible:
     enum:
       - qcom,geni-se-qup
+      - qcom,geni-se-i2c-master-hub
 
   reg:
     description: QUP wrapper common register address and length.
     maxItems: 1
 
   clock-names:
-    items:
-      - const: m-ahb
-      - const: s-ahb
+    minItems: 1
+    maxItems: 2
 
   clocks:
-    items:
-      - description: Master AHB Clock
-      - description: Slave AHB Clock
+    minItems: 1
+    maxItems: 2
 
   "#address-cells":
     const: 2
@@ -81,6 +80,39 @@ patternProperties:
     description: GENI Serial Engine based UART Controller.
     $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-se-i2c-master-hub
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Slave AHB Clock
+
+        iommus: false
+
+      patternProperties:
+        "spi@[0-9a-f]+$": false
+        "serial@[0-9a-f]+$": false
+    else:
+      properties:
+        clock-names:
+          items:
+            - const: m-ahb
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Master AHB Clock
+            - description: Slave AHB Clock
+
 additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml
index 4a50f1d277..b246500d3d 100644
--- a/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml
+++ b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -99,6 +99,9 @@ properties:
       - const: drv-2
       - const: drv-3
 
+  power-domains:
+    maxItems: 1
+
   bcm-voter:
     $ref: /schemas/interconnect/qcom,bcm-voter.yaml#
 
@@ -151,6 +154,7 @@ examples:
                           <SLEEP_TCS   3>,
                           <WAKE_TCS    3>,
                           <CONTROL_TCS 1>;
+        power-domains = <&CLUSTER_PD>;
       };
 
   - |
@@ -197,6 +201,7 @@ examples:
                           <SLEEP_TCS   3>,
                           <WAKE_TCS    3>,
                           <CONTROL_TCS 0>;
+        power-domains = <&CLUSTER_PD>;
 
         clock-controller {
             compatible = "qcom,sm8350-rpmh-clk";
diff --git a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml
index 09d5bfa920..11c0f4dd79 100644
--- a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm Resource Power Manager (RPM) over SMD
+title: Qualcomm Resource Power Manager (RPM) over SMD/GLINK
 
 description: |
   This driver is used to interface with the Resource Power Manager (RPM) found
@@ -12,9 +12,9 @@ description: |
   to vote for state of the system resources, such as clocks, regulators and bus
   frequencies.
 
-  The SMD information for the RPM edge should be filled out.  See qcom,smd.yaml
-  for the required edge properties.  All SMD related properties will reside
-  within the RPM node itself.
+  The SMD or GLINK information for the RPM edge should be filled out.  See
+  qcom,smd.yaml for the required edge properties.  All SMD/GLINK related
+  properties will reside within the RPM node itself.
 
   The RPM exposes resources to its subnodes.  The rpm_requests node must be
   present and this subnode may contain children that designate regulator
@@ -45,6 +45,7 @@ properties:
       - qcom,rpm-sdm660
       - qcom,rpm-sm6115
       - qcom,rpm-sm6125
+      - qcom,rpm-sm6375
       - qcom,rpm-qcm2290
       - qcom,rpm-qcs404
 
@@ -55,12 +56,23 @@ properties:
   power-controller:
     $ref: /schemas/power/qcom,rpmpd.yaml#
 
+  qcom,glink-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the RPM communication
+    items:
+      - const: rpm_requests
+
   qcom,smd-channels:
     $ref: /schemas/types.yaml#/definitions/string-array
     description: Channel name used for the RPM communication
     items:
       - const: rpm_requests
 
+patternProperties:
+  "^regulators(-[01])?$":
+    $ref: /schemas/regulator/qcom,smd-rpm-regulator.yaml#
+    unevaluatedProperties: false
+
 if:
   properties:
     compatible:
@@ -69,10 +81,18 @@ if:
           - qcom,rpm-apq8084
           - qcom,rpm-msm8916
           - qcom,rpm-msm8974
+          - qcom,rpm-msm8976
           - qcom,rpm-msm8953
 then:
+  properties:
+    qcom,glink-channels: false
   required:
     - qcom,smd-channels
+else:
+  properties:
+    qcom,smd-channels: false
+  required:
+    - qcom,glink-channels
 
 required:
   - compatible
diff --git a/dts/Bindings/soc/qcom/qcom,smem.yaml b/dts/Bindings/soc/qcom/qcom,smem.yaml
index 4149cf2b66..497614ddf0 100644
--- a/dts/Bindings/soc/qcom/qcom,smem.yaml
+++ b/dts/Bindings/soc/qcom/qcom,smem.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm Shared Memory Manager binding
+title: Qualcomm Shared Memory Manager
 
 maintainers:
   - Andy Gross <agross@kernel.org>
diff --git a/dts/Bindings/soc/qcom/qcom,smp2p.yaml b/dts/Bindings/soc/qcom/qcom,smp2p.yaml
index 795bd8cd41..58500529b9 100644
--- a/dts/Bindings/soc/qcom/qcom,smp2p.yaml
+++ b/dts/Bindings/soc/qcom/qcom,smp2p.yaml
@@ -60,7 +60,7 @@ properties:
       Two identifiers of the inbound and outbound smem items used for this edge.
 
 patternProperties:
-  "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$":
+  "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap|wlan-ap-to-wpss|wlan-wpss-to-ap$":
     type: object
     description:
       Each SMP2P pair contain a set of inbound and outbound entries, these are
diff --git a/dts/Bindings/soc/qcom/qcom,spm.yaml b/dts/Bindings/soc/qcom/qcom,spm.yaml
index f433e6e0a1..aca3d40bcc 100644
--- a/dts/Bindings/soc/qcom/qcom,spm.yaml
+++ b/dts/Bindings/soc/qcom/qcom,spm.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm Subsystem Power Manager binding
+title: Qualcomm Subsystem Power Manager
 
 maintainers:
   - Andy Gross <agross@kernel.org>
@@ -24,8 +24,11 @@ properties:
           - qcom,msm8998-silver-saw2-v4.1-l2
           - qcom,msm8909-saw2-v3.0-cpu
           - qcom,msm8916-saw2-v3.0-cpu
+          - qcom,msm8939-saw2-v3.0-cpu
           - qcom,msm8226-saw2-v2.1-cpu
           - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,msm8976-gold-saw2-v2.3-l2
+          - qcom,msm8976-silver-saw2-v2.3-l2
           - qcom,apq8084-saw2-v2.1-cpu
           - qcom,apq8064-saw2-v1.1-cpu
       - const: qcom,saw2
diff --git a/dts/Bindings/soc/qcom/qcom,wcnss.yaml b/dts/Bindings/soc/qcom/qcom,wcnss.yaml
index 5320504bb5..0e6fd57d65 100644
--- a/dts/Bindings/soc/qcom/qcom,wcnss.yaml
+++ b/dts/Bindings/soc/qcom/qcom,wcnss.yaml
@@ -42,15 +42,13 @@ properties:
   bluetooth:
     type: object
     additionalProperties: false
+    allOf:
+      - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml#
     properties:
       compatible:
         const: qcom,wcnss-bt
 
-      local-bd-address:
-        $ref: /schemas/types.yaml#/definitions/uint8-array
-        maxItems: 6
-        description:
-          See Documentation/devicetree/bindings/net/bluetooth.txt
+      local-bd-address: true
 
     required:
       - compatible
diff --git a/dts/Bindings/soc/qcom/qcom-stats.yaml b/dts/Bindings/soc/qcom/qcom-stats.yaml
index 48eda4d0d3..7ab8cfff18 100644
--- a/dts/Bindings/soc/qcom/qcom-stats.yaml
+++ b/dts/Bindings/soc/qcom/qcom-stats.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/soc/qcom/qcom-stats.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. (QTI) Stats bindings
+title: Qualcomm Technologies, Inc. (QTI) Stats
 
 maintainers:
   - Maulik Shah <mkshah@codeaurora.org>
diff --git a/dts/Bindings/soc/renesas/renesas,r9a09g011-sys.yaml b/dts/Bindings/soc/renesas/renesas,r9a09g011-sys.yaml
new file mode 100644
index 0000000000..1cac3cb522
--- /dev/null
+++ b/dts/Bindings/soc/renesas/renesas,r9a09g011-sys.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g011-sys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M System Configuration (SYS)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The RZ/V2M-alike SYS (System Configuration) controls the overall
+  configuration of the LSI and supports the following functions,
+  - Bank address settings for DMAC
+  - Bank address settings of the units for ICB
+  - ETHER AxCACHE[1] (C bit) control function
+  - RAMA initialization control
+  - MD[7:0] pin monitoring
+  - LSI version
+  - PCIe related settings
+  - WDT stop control
+  - Temperature sensor (TSU) monitor
+
+properties:
+  compatible:
+    const: renesas,r9a09g011-sys
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sys: system-controller@a3f03000 {
+      compatible = "renesas,r9a09g011-sys";
+      reg = <0xa3f03000 0x400>;
+    };
diff --git a/dts/Bindings/arm/renesas.yaml b/dts/Bindings/soc/renesas/renesas.yaml
index f51464a08a..2789022b52 100644
--- a/dts/Bindings/arm/renesas.yaml
+++ b/dts/Bindings/soc/renesas/renesas.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/renesas.yaml#
+$id: http://devicetree.org/schemas/soc/renesas/renesas.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas SH-Mobile, R-Mobile, and R-Car Platform
@@ -431,11 +431,12 @@ properties:
               - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
           - const: renesas,r9a06g032
 
-      - description: RZ/G2UL (R9A07G043)
+      - description: RZ/Five and RZ/G2UL (R9A07G043)
         items:
           - enum:
               - renesas,smarc-evk # SMARC EVK
           - enum:
+              - renesas,r9a07g043f01 # RZ/Five
               - renesas,r9a07g043u11 # RZ/G2UL Type-1
               - renesas,r9a07g043u12 # RZ/G2UL Type-2
           - const: renesas,r9a07g043
diff --git a/dts/Bindings/soc/samsung/exynos-usi.yaml b/dts/Bindings/soc/samsung/exynos-usi.yaml
index 60b49562ff..a6836904a4 100644
--- a/dts/Bindings/soc/samsung/exynos-usi.yaml
+++ b/dts/Bindings/soc/samsung/exynos-usi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Samsung's Exynos USI (Universal Serial Interface) binding
+title: Samsung's Exynos USI (Universal Serial Interface)
 
 maintainers:
   - Sam Protsenko <semen.protsenko@linaro.org>
diff --git a/dts/Bindings/soc/ti/sci-pm-domain.yaml b/dts/Bindings/soc/ti/sci-pm-domain.yaml
index 9e6cb4ee97..5df7688a1e 100644
--- a/dts/Bindings/soc/ti/sci-pm-domain.yaml
+++ b/dts/Bindings/soc/ti/sci-pm-domain.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI generic power domain node bindings
+title: TI-SCI generic power domain
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/dts/Bindings/sound/adi,adau1372.yaml b/dts/Bindings/sound/adi,adau1372.yaml
index 59f7c60a14..044bcd370d 100644
--- a/dts/Bindings/sound/adi,adau1372.yaml
+++ b/dts/Bindings/sound/adi,adau1372.yaml
@@ -8,12 +8,15 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADAU1372 CODEC
 
 maintainers:
-  - Alexandre Belloni <alexandre.belloni@bootlin.om>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
 
 description: |
   Analog Devices ADAU1372 four inputs and two outputs codec.
   https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1372.pdf
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -42,7 +45,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/adi,adau1977.yaml b/dts/Bindings/sound/adi,adau1977.yaml
index 847b83398d..dba3023a45 100644
--- a/dts/Bindings/sound/adi,adau1977.yaml
+++ b/dts/Bindings/sound/adi,adau1977.yaml
@@ -51,6 +51,7 @@ required:
   - AVDD-supply
 
 allOf:
+  - $ref: dai-common.yaml#
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 unevaluatedProperties: false
diff --git a/dts/Bindings/sound/adi,adau7118.yaml b/dts/Bindings/sound/adi,adau7118.yaml
index fb78967ee1..12f60507ae 100644
--- a/dts/Bindings/sound/adi,adau7118.yaml
+++ b/dts/Bindings/sound/adi,adau7118.yaml
@@ -15,6 +15,9 @@ description: |
   standalone mode.
   https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7118.pdf
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -57,7 +60,7 @@ required:
   - iovdd-supply
   - dvdd-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/ak4375.yaml b/dts/Bindings/sound/ak4375.yaml
index 5f0fc584bb..587598e122 100644
--- a/dts/Bindings/sound/ak4375.yaml
+++ b/dts/Bindings/sound/ak4375.yaml
@@ -9,6 +9,9 @@ title: AK4375 DAC and headphones amplifier
 maintainers:
   - Vincent Knecht <vincent.knecht@mailoo.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: asahi-kasei,ak4375
@@ -35,7 +38,7 @@ required:
   - avdd-supply
   - tvdd-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/ak4613.yaml b/dts/Bindings/sound/ak4613.yaml
index aa8a258a9f..010574645e 100644
--- a/dts/Bindings/sound/ak4613.yaml
+++ b/dts/Bindings/sound/ak4613.yaml
@@ -9,6 +9,9 @@ title: AK4613 I2C transmitter
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: asahi-kasei,ak4613
@@ -35,7 +38,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/ak4642.yaml b/dts/Bindings/sound/ak4642.yaml
index 48a5b2c393..437fe5d7ca 100644
--- a/dts/Bindings/sound/ak4642.yaml
+++ b/dts/Bindings/sound/ak4642.yaml
@@ -9,6 +9,9 @@ title: AK4642 I2C transmitter
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -37,7 +40,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml b/dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml
index 292fcb6439..78273647f7 100644
--- a/dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -102,6 +102,7 @@ required:
   - dma-names
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -228,7 +229,7 @@ allOf:
               - Mic
               - Speaker
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/allwinner,sun4i-a10-i2s.yaml b/dts/Bindings/sound/allwinner,sun4i-a10-i2s.yaml
index dd30881ad2..739114fb65 100644
--- a/dts/Bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/dts/Bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -61,6 +61,7 @@ properties:
     maxItems: 1
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -128,7 +129,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/allwinner,sun4i-a10-spdif.yaml b/dts/Bindings/sound/allwinner,sun4i-a10-spdif.yaml
index 68c84e29ce..8108c564dd 100644
--- a/dts/Bindings/sound/allwinner,sun4i-a10-spdif.yaml
+++ b/dts/Bindings/sound/allwinner,sun4i-a10-spdif.yaml
@@ -54,6 +54,7 @@ properties:
     maxItems: 1
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -104,7 +105,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/allwinner,sun50i-h6-dmic.yaml b/dts/Bindings/sound/allwinner,sun50i-h6-dmic.yaml
index 2f12cabe4c..763b876047 100644
--- a/dts/Bindings/sound/allwinner,sun50i-h6-dmic.yaml
+++ b/dts/Bindings/sound/allwinner,sun50i-h6-dmic.yaml
@@ -9,9 +9,17 @@ title: Allwinner H6 DMIC
 maintainers:
   - Ban Tao <fengzheng923@gmail.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
-    const: allwinner,sun50i-h6-dmic
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-dmic
+          - const: allwinner,sun50i-h6-dmic
+      - const: allwinner,sun50i-h6-dmic
 
   "#sound-dai-cells":
     const: 0
@@ -54,7 +62,7 @@ required:
   - dma-names
   - resets
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/allwinner,sun8i-a33-codec.yaml b/dts/Bindings/sound/allwinner,sun8i-a33-codec.yaml
index 4eb11a8e62..63eadc4200 100644
--- a/dts/Bindings/sound/allwinner,sun8i-a33-codec.yaml
+++ b/dts/Bindings/sound/allwinner,sun8i-a33-codec.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   "#sound-dai-cells":
     minimum: 0
@@ -49,7 +52,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/amlogic,aiu.yaml b/dts/Bindings/sound/amlogic,aiu.yaml
index 0705f91199..6350dfc0a9 100644
--- a/dts/Bindings/sound/amlogic,aiu.yaml
+++ b/dts/Bindings/sound/amlogic,aiu.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/amlogic,g12a-toacodec.yaml b/dts/Bindings/sound/amlogic,g12a-toacodec.yaml
index 77469a45bb..23f82bb897 100644
--- a/dts/Bindings/sound/amlogic,g12a-toacodec.yaml
+++ b/dts/Bindings/sound/amlogic,g12a-toacodec.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/amlogic,t9015.yaml b/dts/Bindings/sound/amlogic,t9015.yaml
index 580a3d040a..5f5cccdbeb 100644
--- a/dts/Bindings/sound/amlogic,t9015.yaml
+++ b/dts/Bindings/sound/amlogic,t9015.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/apple,mca.yaml b/dts/Bindings/sound/apple,mca.yaml
index d5dc92b5b6..40e3a202f4 100644
--- a/dts/Bindings/sound/apple,mca.yaml
+++ b/dts/Bindings/sound/apple,mca.yaml
@@ -14,6 +14,9 @@ description: |
 maintainers:
   - Martin Povišer <povik+lin@cutebit.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     items:
@@ -106,7 +109,7 @@ required:
   - power-domains
   - '#sound-dai-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/audio-graph-port.yaml b/dts/Bindings/sound/audio-graph-port.yaml
index 64654ceef2..f5b8b6d130 100644
--- a/dts/Bindings/sound/audio-graph-port.yaml
+++ b/dts/Bindings/sound/audio-graph-port.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/audio-graph-port.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Audio Graph Card 'port' Node Bindings
+title: Audio Graph Card 'port'
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/dts/Bindings/sound/awinic,aw8738.yaml b/dts/Bindings/sound/awinic,aw8738.yaml
index dce86dafe3..bc6c6b1722 100644
--- a/dts/Bindings/sound/awinic,aw8738.yaml
+++ b/dts/Bindings/sound/awinic,aw8738.yaml
@@ -15,7 +15,7 @@ description:
   function (primarily the power limit for the amplifier).
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/sound/cirrus,cs35l41.yaml b/dts/Bindings/sound/cirrus,cs35l41.yaml
index 51d815d0c6..82062d80d7 100644
--- a/dts/Bindings/sound/cirrus,cs35l41.yaml
+++ b/dts/Bindings/sound/cirrus,cs35l41.yaml
@@ -146,6 +146,7 @@ required:
   - "#sound-dai-cells"
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         cirrus,boost-type:
@@ -171,7 +172,7 @@ allOf:
           cirrus,gpio1-src-select:
             enum: [1]
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/cirrus,cs35l45.yaml b/dts/Bindings/sound/cirrus,cs35l45.yaml
index 184a1344ea..88a0ca474c 100644
--- a/dts/Bindings/sound/cirrus,cs35l45.yaml
+++ b/dts/Bindings/sound/cirrus,cs35l45.yaml
@@ -14,6 +14,9 @@ description: |
   CS35L45 is a Boosted Mono Class D Amplifier with DSP
   Speaker Protection and Adaptive Battery Management.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -52,7 +55,7 @@ required:
   - reg
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/cirrus,cs42l51.yaml b/dts/Bindings/sound/cirrus,cs42l51.yaml
index 963a871e74..670b67ec0b 100644
--- a/dts/Bindings/sound/cirrus,cs42l51.yaml
+++ b/dts/Bindings/sound/cirrus,cs42l51.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/cirrus,cs42l51.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CS42L51 audio codec DT bindings
+title: CS42L51 audio codec
 
 maintainers:
   - Olivier Moysan <olivier.moysan@foss.st.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: cirrus,cs42l51
@@ -46,7 +49,7 @@ required:
   - reg
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/cirrus,lochnagar.yaml b/dts/Bindings/sound/cirrus,lochnagar.yaml
index cea612d3d4..52f024f530 100644
--- a/dts/Bindings/sound/cirrus,lochnagar.yaml
+++ b/dts/Bindings/sound/cirrus,lochnagar.yaml
@@ -24,6 +24,9 @@ description: |
   This binding must be part of the Lochnagar MFD binding:
     [1] ../mfd/cirrus,lochnagar.yaml
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -49,4 +52,4 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
diff --git a/dts/Bindings/sound/cirrus,madera.yaml b/dts/Bindings/sound/cirrus,madera.yaml
index 23138ddcb6..014d4eaa87 100644
--- a/dts/Bindings/sound/cirrus,madera.yaml
+++ b/dts/Bindings/sound/cirrus,madera.yaml
@@ -22,6 +22,9 @@ description: |
 
   The properties are all contained in the parent MFD node.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   '#sound-dai-cells':
     description:
diff --git a/dts/Bindings/sound/name-prefix.yaml b/dts/Bindings/sound/dai-common.yaml
index 2fe57f87ac..d858eea73e 100644
--- a/dts/Bindings/sound/name-prefix.yaml
+++ b/dts/Bindings/sound/dai-common.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/name-prefix.yaml#
+$id: http://devicetree.org/schemas/sound/dai-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Component sound name prefix
+title: Digital Audio Interface Common Properties
 
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
@@ -18,4 +18,6 @@ properties:
       sink/source names may use this property to prepend the name of their
       sinks/sources with the provided string.
 
+  '#sound-dai-cells': true
+
 additionalProperties: true
diff --git a/dts/Bindings/sound/davinci-mcasp-audio.yaml b/dts/Bindings/sound/davinci-mcasp-audio.yaml
index f46c66bc6b..7735e08d35 100644
--- a/dts/Bindings/sound/davinci-mcasp-audio.yaml
+++ b/dts/Bindings/sound/davinci-mcasp-audio.yaml
@@ -167,6 +167,7 @@ required:
   - interrupt-names
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         opmode:
@@ -177,7 +178,7 @@ allOf:
       required:
         - tdm-slots
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/dmic-codec.yaml b/dts/Bindings/sound/dmic-codec.yaml
new file mode 100644
index 0000000000..59ef0cf6b6
--- /dev/null
+++ b/dts/Bindings/sound/dmic-codec.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dmic-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PDM Digital microphone (DMIC) codec
+
+maintainers:
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: dmic-codec
+
+  '#sound-dai-cells':
+    const: 0
+
+  dmicen-gpios:
+    description: GPIO specifier for DMIC to control start and stop
+    maxItems: 1
+
+  num-channels:
+    description: Number of microphones on this DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    default: 8
+
+  modeswitch-delay-ms:
+    description: Delay (in ms) to complete DMIC mode switch
+
+  wakeup-delay-ms:
+    description: Delay (in ms) after enabling the DMIC
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dmic {
+        compatible = "dmic-codec";
+        dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+        num-channels = <1>;
+        wakeup-delay-ms = <50>;
+        modeswitch-delay-ms = <35>;
+    };
+...
diff --git a/dts/Bindings/sound/dmic.txt b/dts/Bindings/sound/dmic.txt
deleted file mode 100644
index 32e8710372..0000000000
--- a/dts/Bindings/sound/dmic.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device-Tree bindings for Digital microphone (DMIC) codec
-
-This device support generic PDM digital microphone.
-
-Required properties:
-	- compatible: should be "dmic-codec".
-
-Optional properties:
-	- dmicen-gpios: GPIO specifier for dmic to control start and stop
-	- num-channels: Number of microphones on this DAI
-	- wakeup-delay-ms: Delay (in ms) after enabling the DMIC
-	- modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch
-
-Example node:
-
-	dmic_codec: dmic@0 {
-		compatible = "dmic-codec";
-		dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		num-channels = <1>;
-		wakeup-delay-ms <50>;
-		modeswitch-delay-ms <35>;
-	};
diff --git a/dts/Bindings/sound/everest,es8316.yaml b/dts/Bindings/sound/everest,es8316.yaml
index 3b752bba74..d9f8f0c7f6 100644
--- a/dts/Bindings/sound/everest,es8316.yaml
+++ b/dts/Bindings/sound/everest,es8316.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Daniel Drake <drake@endlessm.com>
   - Katsuhiro Suzuki <katsuhiro@katsuster.net>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: everest,es8316
@@ -33,7 +36,7 @@ required:
   - reg
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/fsl,micfil.yaml b/dts/Bindings/sound/fsl,micfil.yaml
index 64d57758ee..4b99a18c79 100644
--- a/dts/Bindings/sound/fsl,micfil.yaml
+++ b/dts/Bindings/sound/fsl,micfil.yaml
@@ -18,6 +18,7 @@ properties:
     enum:
       - fsl,imx8mm-micfil
       - fsl,imx8mp-micfil
+      - fsl,imx93-micfil
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/sound/fsl,rpmsg.yaml b/dts/Bindings/sound/fsl,rpmsg.yaml
index d370c98a62..e847611a85 100644
--- a/dts/Bindings/sound/fsl,rpmsg.yaml
+++ b/dts/Bindings/sound/fsl,rpmsg.yaml
@@ -11,8 +11,11 @@ maintainers:
 
 description: |
   fsl_rpmsg is a virtual audio device. Mapping to real hardware devices
-  are SAI, DMA controlled by Cortex M core. What we see from Linux
-  side is a device which provides audio service by rpmsg channel.
+  are SAI, MICFIL, DMA controlled by Cortex M core. What we see from
+  Linux side is a device which provides audio service by rpmsg channel.
+  We can create different sound cards which access different hardwares
+  such as SAI, MICFIL, .etc through building rpmsg channels between
+  Cortex-A and Cortex-M.
 
 properties:
   compatible:
@@ -85,6 +88,16 @@ properties:
       This is a boolean property. If present, the receiving function
       will be enabled.
 
+  fsl,rpmsg-channel-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      A string property to assign rpmsg channel this sound card sits on.
+      This property can be omitted if there is only one sound card and it sits
+      on "rpmsg-audio-channel".
+    enum:
+      - rpmsg-audio-channel
+      - rpmsg-micfil-channel
+
 required:
   - compatible
   - model
@@ -107,3 +120,22 @@ examples:
                  <&clk IMX8MN_AUDIO_PLL2_OUT>;
         clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k";
     };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
+    rpmsg_micfil: audio-controller {
+        compatible = "fsl,imx8mm-rpmsg-audio";
+        model = "micfil-audio";
+        fsl,rpmsg-channel-name = "rpmsg-micfil-channel";
+        fsl,enable-lpa;
+        fsl,rpmsg-in;
+        clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+                 <&clk IMX8MM_CLK_PDM_ROOT>,
+                 <&clk IMX8MM_CLK_SDMA3_ROOT>,
+                 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+                 <&clk IMX8MM_AUDIO_PLL2_OUT>;
+        clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k";
+    };
+
+...
diff --git a/dts/Bindings/sound/fsl,sai.yaml b/dts/Bindings/sound/fsl,sai.yaml
index 70c4111d59..7e56337d8e 100644
--- a/dts/Bindings/sound/fsl,sai.yaml
+++ b/dts/Bindings/sound/fsl,sai.yaml
@@ -18,14 +18,12 @@ description: |
 properties:
   compatible:
     oneOf:
-      - enum:
-          - fsl,vf610-sai
-          - fsl,imx6sx-sai
-          - fsl,imx6ul-sai
-          - fsl,imx7ulp-sai
-          - fsl,imx8mq-sai
-          - fsl,imx8qm-sai
-          - fsl,imx8ulp-sai
+      - items:
+          - enum:
+              - fsl,imx6ul-sai
+              - fsl,imx7d-sai
+          - const: fsl,imx6sx-sai
+
       - items:
           - enum:
               - fsl,imx8mm-sai
@@ -33,19 +31,19 @@ properties:
               - fsl,imx8mp-sai
           - const: fsl,imx8mq-sai
 
+      - items:
+          - enum:
+              - fsl,imx6sx-sai
+              - fsl,imx7ulp-sai
+              - fsl,imx8mq-sai
+              - fsl,imx8qm-sai
+              - fsl,imx8ulp-sai
+              - fsl,imx93-sai
+              - fsl,vf610-sai
+
   reg:
     maxItems: 1
 
-  interrupts:
-    items:
-      - description: receive and transmit interrupt
-
-  dmas:
-    maxItems: 2
-
-  dma-names:
-    maxItems: 2
-
   clocks:
     items:
       - description: The ipg clock for register access
@@ -67,7 +65,7 @@ properties:
           - const: mclk3
           - const: pll8k
           - const: pll11k
-        minItems: 4
+        minItems: 5
       - items:
           - const: bus
           - const: mclk1
@@ -77,19 +75,37 @@ properties:
           - const: pll11k
         minItems: 4
 
-  lsb-first:
-    description: |
-      Configures whether the LSB or the MSB is transmitted
-      first for the fifo data. If this property is absent,
-      the MSB is transmitted first as default, or the LSB
-      is transmitted first.
-    type: boolean
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: receive and transmit interrupt
 
   big-endian:
     description: |
       required if all the SAI registers are big-endian rather than little-endian.
     type: boolean
 
+  fsl,dataline:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Configure the dataline. It has 3 value for each configuration
+    maxItems: 16
+    items:
+      items:
+        - description: format Default(0), I2S(1) or PDM(2)
+          enum: [0, 1, 2]
+        - description: dataline mask for 'rx'
+        - description: dataline mask for 'tx'
+
+  fsl,sai-mclk-direction-output:
+    description: SAI will output the SAI MCLK clock.
+    type: boolean
+
   fsl,sai-synchronous-rx:
     description: |
       SAI will work in the synchronous mode (sync Tx with Rx) which means
@@ -108,31 +124,24 @@ properties:
       of transmitter.
     type: boolean
 
-  fsl,dataline:
-    $ref: /schemas/types.yaml#/definitions/uint32-matrix
-    description: |
-      Configure the dataline. It has 3 value for each configuration
-    maxItems: 16
-    items:
-      items:
-        - description: format Default(0), I2S(1) or PDM(2)
-          enum: [0, 1, 2]
-        - description: dataline mask for 'rx'
-        - description: dataline mask for 'tx'
-
-  fsl,sai-mclk-direction-output:
-    description: SAI will output the SAI MCLK clock.
-    type: boolean
-
   fsl,shared-interrupt:
     description: Interrupt is shared with other modules.
     type: boolean
 
+  lsb-first:
+    description: |
+      Configures whether the LSB or the MSB is transmitted
+      first for the fifo data. If this property is absent,
+      the MSB is transmitted first as default, or the LSB
+      is transmitted first.
+    type: boolean
+
   "#sound-dai-cells":
     const: 0
     description: optional, some dts node didn't add it.
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -168,13 +177,13 @@ allOf:
 required:
   - compatible
   - reg
-  - interrupts
-  - dmas
-  - dma-names
   - clocks
   - clock-names
+  - dmas
+  - dma-names
+  - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/google,cros-ec-codec.yaml b/dts/Bindings/sound/google,cros-ec-codec.yaml
index dea293f403..1434f44337 100644
--- a/dts/Bindings/sound/google,cros-ec-codec.yaml
+++ b/dts/Bindings/sound/google,cros-ec-codec.yaml
@@ -17,6 +17,9 @@ description: |
   subnode of a cros-ec node.
   (see Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: google,cros-ec-codec
@@ -42,7 +45,7 @@ required:
   - compatible
   - '#sound-dai-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -57,6 +60,7 @@ examples:
         cros-ec@0 {
             compatible = "google,cros-ec-spi";
             reg = <0>;
+            interrupts = <93 0>;
 
             codecs {
                 #address-cells = <2>;
diff --git a/dts/Bindings/sound/ingenic,aic.yaml b/dts/Bindings/sound/ingenic,aic.yaml
index d607325f2f..c59a7cd9ea 100644
--- a/dts/Bindings/sound/ingenic,aic.yaml
+++ b/dts/Bindings/sound/ingenic,aic.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/ingenic,aic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings
+title: Ingenic SoCs AC97 / I2S Controller (AIC)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   $nodename:
     pattern: '^audio-controller@'
@@ -37,15 +40,11 @@ properties:
     items:
       - description: AIC clock
       - description: I2S clock
-      - description: EXT clock
-      - description: PLL/2 clock
 
   clock-names:
     items:
       - const: aic
       - const: i2s
-      - const: ext
-      - const: pll half
 
   dmas:
     items:
@@ -57,7 +56,7 @@ properties:
       - const: rx
       - const: tx
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
@@ -82,10 +81,8 @@ examples:
       interrupts = <18>;
 
       clocks = <&cgu JZ4740_CLK_AIC>,
-               <&cgu JZ4740_CLK_I2S>,
-               <&cgu JZ4740_CLK_EXT>,
-               <&cgu JZ4740_CLK_PLL_HALF>;
-      clock-names = "aic", "i2s", "ext", "pll half";
+               <&cgu JZ4740_CLK_I2S>;
+      clock-names = "aic", "i2s";
 
       dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
       dma-names = "rx", "tx";
diff --git a/dts/Bindings/sound/ingenic,codec.yaml b/dts/Bindings/sound/ingenic,codec.yaml
index 48aae54dd6..b58b90850e 100644
--- a/dts/Bindings/sound/ingenic,codec.yaml
+++ b/dts/Bindings/sound/ingenic,codec.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/ingenic,codec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ47xx internal codec DT bindings
+title: Ingenic JZ47xx internal codec
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   $nodename:
     pattern: '^audio-codec@.*'
@@ -37,7 +40,7 @@ properties:
   '#sound-dai-cells':
     const: 0
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/sound/intel,keembay-i2s.yaml b/dts/Bindings/sound/intel,keembay-i2s.yaml
index b2603f611a..76b6f2cf25 100644
--- a/dts/Bindings/sound/intel,keembay-i2s.yaml
+++ b/dts/Bindings/sound/intel,keembay-i2s.yaml
@@ -8,11 +8,15 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Intel KeemBay I2S
 
 maintainers:
-  - Sia, Jee Heng <jee.heng.sia@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+  - Paul J. Murphy <paul.j.murphy@intel.com>
 
 description: |
  Intel KeemBay I2S
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -64,7 +68,7 @@ required:
   - clock-names
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/linux,bt-sco.yaml b/dts/Bindings/sound/linux,bt-sco.yaml
index b97e0fcbdb..a67b79cbe0 100644
--- a/dts/Bindings/sound/linux,bt-sco.yaml
+++ b/dts/Bindings/sound/linux,bt-sco.yaml
@@ -9,6 +9,9 @@ title: Bluetooth SCO Audio Codec
 maintainers:
   - Mark Brown <broonie@kernel.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   '#sound-dai-cells':
     enum:
@@ -26,7 +29,7 @@ required:
   - '#sound-dai-cells'
   - compatible
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/linux,spdif-dit.yaml b/dts/Bindings/sound/linux,spdif-dit.yaml
index 808f6d2736..fe5f0756af 100644
--- a/dts/Bindings/sound/linux,spdif-dit.yaml
+++ b/dts/Bindings/sound/linux,spdif-dit.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Mark Brown <broonie@kernel.org>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/sound/marvell,mmp-sspa.yaml b/dts/Bindings/sound/marvell,mmp-sspa.yaml
index 81f266d66e..f302fe89a2 100644
--- a/dts/Bindings/sound/marvell,mmp-sspa.yaml
+++ b/dts/Bindings/sound/marvell,mmp-sspa.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/marvell,mmp-sspa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvel SSPA Digital Audio Interface Bindings
+title: Marvel SSPA Digital Audio Interface
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   $nodename:
     pattern: "^audio-controller(@.*)?$"
@@ -73,7 +76,7 @@ required:
   - dma-names
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/max98357a.txt b/dts/Bindings/sound/max98357a.txt
deleted file mode 100644
index 75db84d062..0000000000
--- a/dts/Bindings/sound/max98357a.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Maxim MAX98357A/MAX98360A audio DAC
-
-This node models the Maxim MAX98357A/MAX98360A DAC.
-
-Required properties:
-- compatible   : "maxim,max98357a" for MAX98357A.
-                 "maxim,max98360a" for MAX98360A.
-
-Optional properties:
-- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin.
-        If this option is not specified then driver does not manage
-        the pin state (e.g. chip is always on).
-- sdmode-delay : specify delay time for SD_MODE pin.
-        If this option is specified, which means it's required i2s clocks
-        ready before SD_MODE is unmuted in order to avoid the speaker pop noise.
-        It's observed that 5ms is sufficient.
-
-Example:
-
-max98357a {
-	compatible = "maxim,max98357a";
-	sdmode-gpios = <&qcom_pinmux 25 0>;
-};
-
-max98360a {
-	compatible = "maxim,max98360a";
-	sdmode-gpios = <&qcom_pinmux 25 0>;
-};
diff --git a/dts/Bindings/sound/max98504.txt b/dts/Bindings/sound/max98504.txt
deleted file mode 100644
index 583ed5fdfb..0000000000
--- a/dts/Bindings/sound/max98504.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Maxim MAX98504 class D mono speaker amplifier
-
-This device supports I2C control interface and an IRQ output signal. It features
-a PCM and PDM digital audio interface (DAI) and a differential analog input.
-
-Required properties:
-
- - compatible : "maxim,max98504"
- - reg : should contain the I2C slave device address
- - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device,
-   as covered in ../regulator/regulator.txt
- - interrupts : should specify the interrupt line the device is connected to,
-   as described in ../interrupt-controller/interrupts.txt
-
-Optional properties:
-
- - maxim,brownout-threshold - the PVDD brownout threshold, the value must be
-   from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range
- - maxim,brownout-attenuation - the brownout attenuation to the speaker gain
-   applied during the "attack hold" and "timed hold" phase, the value must be
-   from 0...6 (dB) range
- - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms,
-   0...255 (VBATBROWN_ATTK_HOLD, register 0x0018)
- - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms,
-   0...255 (VBATBROWN_TIME_HOLD, register 0x0019)
- - maxim,brownout-release-rate-ms - the brownout release phase step time in ms,
-   0...255 (VBATBROWN_RELEASE, register 0x001A)
-
-The default value when the above properties are not specified is 0,
-the maxim,brownout-threshold property must be specified to actually enable
-the PVDD brownout protection.
-
-Example:
-
- max98504@31 {
-	compatible = "maxim,max98504";
-	reg = <0x31>;
-	interrupt-parent = <&gpio_bank_0>;
-	interrupts = <2 0>;
-
-	DVDD-supply = <&regulator>;
-	DIOVDD-supply = <&regulator>;
-	PVDD-supply = <&regulator>;
-};
diff --git a/dts/Bindings/sound/maxim,max98357a.yaml b/dts/Bindings/sound/maxim,max98357a.yaml
new file mode 100644
index 0000000000..83ba8666fb
--- /dev/null
+++ b/dts/Bindings/sound/maxim,max98357a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98357a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98357A/MAX98360A amplifier
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+description:
+  Maxim Integrated MAX98357A/MAX98360A is a digital pulse-code modulation (PCM)
+  input Class D amplifier.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98357a
+      - maxim,max98360a
+
+  '#sound-dai-cells':
+    const: 0
+
+  sdmode-gpios:
+    maxItems: 1
+    description:
+      Chip's SD_MODE pin.  If missing the chip is always on.
+
+  sdmode-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay time for SD_MODE pin changes intended to make I2S clocks ready
+      before SD_MODE is unmuted in order to avoid the speaker pop noise.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    amplifier {
+        compatible = "maxim,max98360a";
+        #sound-dai-cells = <0>;
+        sdmode-gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/dts/Bindings/sound/maxim,max98504.yaml b/dts/Bindings/sound/maxim,max98504.yaml
new file mode 100644
index 0000000000..23f19a9d2c
--- /dev/null
+++ b/dts/Bindings/sound/maxim,max98504.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98504.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98504 class D mono speaker amplifier
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Maxim Integrated MAX98504 speaker amplifier supports I2C control interface
+  with an IRQ output signal, PCM and PDM digital audio interface (DAI) and a
+  differential analog input.
+
+properties:
+  compatible:
+    const: maxim,max98504
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  DIOVDD-supply: true
+  DVDD-supply: true
+  PVDD-supply: true
+
+  maxim,brownout-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 21
+    default: 0
+    description:
+      PVDD brownout threshold, where values correspond to 2.6V, 2.65V...3.65V
+      voltage range.  Property also enables the PVDD brownout protection.
+
+  maxim,brownout-attenuation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 6
+    default: 0
+    description:
+      Brownout attenuation to the speaker gain applied during the "attack hold"
+      and "timed hold" phase, the value must be from 0...6 (dB) range.
+
+  maxim,brownout-attack-hold-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout attack hold phase time in ms, VBATBROWN_ATTK_HOLD, register 0x0018.
+
+  maxim,brownout-timed-hold-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout timed hold phase time in ms, VBATBROWN_TIME_HOLD, register 0x0019.
+
+  maxim,brownout-release-rate-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout release phase step time in ms, VBATBROWN_RELEASE, register 0x001A.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        amplifier@31 {
+            compatible = "maxim,max98504";
+            reg = <0x31>;
+
+            DIOVDD-supply = <&ldo3_reg>;
+            DVDD-supply = <&ldo3_reg>;
+        };
+    };
diff --git a/dts/Bindings/sound/mchp,i2s-mcc.yaml b/dts/Bindings/sound/mchp,i2s-mcc.yaml
index 0481315cb5..621022872c 100644
--- a/dts/Bindings/sound/mchp,i2s-mcc.yaml
+++ b/dts/Bindings/sound/mchp,i2s-mcc.yaml
@@ -66,13 +66,15 @@ properties:
     enum: [0, 1, 2, 3]
     default: 0
 
-if:
-  properties:
-    compatible:
-      const: microchip,sam9x60-i2smcc
-then:
-  properties:
-    microchip,tdm-data-pair: false
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: microchip,sam9x60-i2smcc
+    then:
+      properties:
+        microchip,tdm-data-pair: false
 
 required:
   - "#sound-dai-cells"
@@ -84,7 +86,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/mchp,spdiftx.yaml b/dts/Bindings/sound/mchp,spdiftx.yaml
index d218e4ab9a..c383162140 100644
--- a/dts/Bindings/sound/mchp,spdiftx.yaml
+++ b/dts/Bindings/sound/mchp,spdiftx.yaml
@@ -13,6 +13,9 @@ description:
   The Microchip Sony/Philips Digital Interface Transmitter is a serial port
   compliant with the IEC-60958 standard.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   "#sound-dai-cells":
     const: 0
@@ -53,7 +56,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/microchip,pdmc.yaml b/dts/Bindings/sound/microchip,pdmc.yaml
index 04414eb4ad..c37b89d94c 100644
--- a/dts/Bindings/sound/microchip,pdmc.yaml
+++ b/dts/Bindings/sound/microchip,pdmc.yaml
@@ -13,6 +13,9 @@ description:
   The Microchip Pulse Density Microphone Controller (PDMC) interfaces up to 4
   digital microphones having Pulse Density Modulated (PDM) outputs.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: microchip,sama7g5-pdmc
@@ -75,7 +78,7 @@ required:
   - dma-names
   - microchip,mic-pos
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/dts/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
index 4fc5b045d3..9d31399902 100644
--- a/dts/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
+++ b/dts/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
@@ -21,6 +21,13 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of MT8186 ASoC platform.
 
+  dmic-gpios:
+    maxItems: 1
+    description:
+      dmic-gpios optional prop for switching between two DMICs.
+      Ex, the GPIO can control a MUX HW component to select
+      dmic clk and data form a Front or Rear dmic.
+
   headset-codec:
     type: object
     additionalProperties: false
@@ -63,14 +70,19 @@ required:
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
 
     sound: mt8186-sound {
         compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
         mediatek,platform = <&afe>;
         pinctrl-names = "aud_clk_mosi_off",
-                        "aud_clk_mosi_on";
+                        "aud_clk_mosi_on",
+                        "aud_gpio_dmic_sec";
         pinctrl-0 = <&aud_clk_mosi_off>;
         pinctrl-1 = <&aud_clk_mosi_on>;
+        pinctrl-2 = <&aud_gpio_dmic_sec>;
+
+        dmic-gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
 
         headset-codec {
             sound-dai = <&rt5682s>;
diff --git a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
index 478be7e3fa..c6e614c1c3 100644
--- a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
+++ b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
@@ -34,7 +34,7 @@ properties:
 
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        maxItems: 1
     required:
       - sound-dai
 
@@ -48,7 +48,6 @@ properties:
         maxItems: 2
         items:
           maxItems: 1
-        $ref: /schemas/types.yaml#/definitions/phandle-array
     required:
       - sound-dai
 
diff --git a/dts/Bindings/sound/mvebu-audio.txt b/dts/Bindings/sound/mvebu-audio.txt
index cb8c07c81c..4f5dec5cb3 100644
--- a/dts/Bindings/sound/mvebu-audio.txt
+++ b/dts/Bindings/sound/mvebu-audio.txt
@@ -6,9 +6,14 @@ Required properties:
   "marvell,kirkwood-audio" for Kirkwood platforms
   "marvell,dove-audio" for Dove platforms
   "marvell,armada370-audio" for Armada 370 platforms
+  "marvell,armada-380-audio" for Armada 38x platforms
 
 - reg: physical base address of the controller and length of memory mapped
-  region.
+  region (named "i2s_regs").
+  With "marvell,armada-380-audio" two other regions are required:
+  first of those is dedicated for Audio PLL Configuration registers
+  (named "pll_regs") and the second one ("soc_ctrl") - for register
+  where one of exceptive I/O types (I2S or S/PDIF) is set.
 
 - interrupts:
   with "marvell,kirkwood-audio", the audio interrupt
@@ -23,6 +28,13 @@ Required properties:
 	"internal" for the internal clock
 	"extclk" for the external clock
 
+Optional properties:
+
+- spdif-mode:
+  Enable S/PDIF mode on Armada 38x SoC. Using this property
+  disables standard I2S I/O. Valid only with "marvell,armada-380-audio"
+  compatible string.
+
 Example:
 
 i2s1: audio-controller@b4000 {
diff --git a/dts/Bindings/sound/nau8315.txt b/dts/Bindings/sound/nau8315.txt
index 6eaec46f38..1cd94517d4 100644
--- a/dts/Bindings/sound/nau8315.txt
+++ b/dts/Bindings/sound/nau8315.txt
@@ -2,6 +2,7 @@ Nuvoton NAU8315 Mono Class-D Amplifier
 
 Required properties:
 - compatible   : "nuvoton,nau8315"
+                 "nuvoton,nau8318"
 
 Optional properties:
 - enable-gpios : GPIO specifier for the chip's device enable input(EN) pin.
@@ -16,3 +17,8 @@ nau8315 {
 	compatible = "nuvoton,nau8315";
 	enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 };
+
+nau8318 {
+	compatible = "nuvoton,nau8318";
+	enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+};
diff --git a/dts/Bindings/sound/nvidia,tegra186-asrc.yaml b/dts/Bindings/sound/nvidia,tegra186-asrc.yaml
index d82415c212..e15f387c4c 100644
--- a/dts/Bindings/sound/nvidia,tegra186-asrc.yaml
+++ b/dts/Bindings/sound/nvidia,tegra186-asrc.yaml
@@ -23,7 +23,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra186-dspk.yaml b/dts/Bindings/sound/nvidia,tegra186-dspk.yaml
index 3d538df878..e1362c7747 100644
--- a/dts/Bindings/sound/nvidia,tegra186-dspk.yaml
+++ b/dts/Bindings/sound/nvidia,tegra186-dspk.yaml
@@ -18,7 +18,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra20-spdif.yaml b/dts/Bindings/sound/nvidia,tegra20-spdif.yaml
index 60a368a132..dc76a4dc0e 100644
--- a/dts/Bindings/sound/nvidia,tegra20-spdif.yaml
+++ b/dts/Bindings/sound/nvidia,tegra20-spdif.yaml
@@ -16,6 +16,9 @@ maintainers:
   - Thierry Reding <treding@nvidia.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: nvidia,tegra20-spdif
@@ -66,7 +69,7 @@ required:
   - dma-names
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/nvidia,tegra210-adx.yaml b/dts/Bindings/sound/nvidia,tegra210-adx.yaml
index ea0dc0ece1..e4c871797f 100644
--- a/dts/Bindings/sound/nvidia,tegra210-adx.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-adx.yaml
@@ -19,7 +19,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra210-amx.yaml b/dts/Bindings/sound/nvidia,tegra210-amx.yaml
index 1aff61f072..021b72546b 100644
--- a/dts/Bindings/sound/nvidia,tegra210-amx.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-amx.yaml
@@ -18,7 +18,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra210-dmic.yaml b/dts/Bindings/sound/nvidia,tegra210-dmic.yaml
index 0f9d2b461e..bff551c35d 100644
--- a/dts/Bindings/sound/nvidia,tegra210-dmic.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-dmic.yaml
@@ -17,7 +17,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra210-i2s.yaml b/dts/Bindings/sound/nvidia,tegra210-i2s.yaml
index 12cd17eede..a82f11fb6c 100644
--- a/dts/Bindings/sound/nvidia,tegra210-i2s.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-i2s.yaml
@@ -17,7 +17,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra210-mixer.yaml b/dts/Bindings/sound/nvidia,tegra210-mixer.yaml
index 570b03282a..049898f02e 100644
--- a/dts/Bindings/sound/nvidia,tegra210-mixer.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-mixer.yaml
@@ -17,7 +17,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra210-mvc.yaml b/dts/Bindings/sound/nvidia,tegra210-mvc.yaml
index 4aecbc847b..d0280d8aa3 100644
--- a/dts/Bindings/sound/nvidia,tegra210-mvc.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-mvc.yaml
@@ -20,7 +20,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nvidia,tegra210-ope.yaml b/dts/Bindings/sound/nvidia,tegra210-ope.yaml
index 9dc9ba590f..5fc03b8771 100644
--- a/dts/Bindings/sound/nvidia,tegra210-ope.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-ope.yaml
@@ -17,7 +17,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/sound/nvidia,tegra210-sfc.yaml b/dts/Bindings/sound/nvidia,tegra210-sfc.yaml
index 694f890d63..185ca0be4f 100644
--- a/dts/Bindings/sound/nvidia,tegra210-sfc.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-sfc.yaml
@@ -17,7 +17,7 @@ maintainers:
   - Sameer Pujar <spujar@nvidia.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   $nodename:
diff --git a/dts/Bindings/sound/nxp,tfa989x.yaml b/dts/Bindings/sound/nxp,tfa989x.yaml
index 7f2e68ff6d..fd2415e231 100644
--- a/dts/Bindings/sound/nxp,tfa989x.yaml
+++ b/dts/Bindings/sound/nxp,tfa989x.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Stephan Gerhold <stephan@gerhold.net>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/sound/qcom,lpass-cpu.yaml b/dts/Bindings/sound/qcom,lpass-cpu.yaml
index ef18a572a1..bb42220916 100644
--- a/dts/Bindings/sound/qcom,lpass-cpu.yaml
+++ b/dts/Bindings/sound/qcom,lpass-cpu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
+title: Qualcomm Technologies Inc. LPASS CPU dai driver
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -109,9 +109,10 @@ required:
   - interrupt-names
   - '#sound-dai-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
diff --git a/dts/Bindings/sound/qcom,lpass-rx-macro.yaml b/dts/Bindings/sound/qcom,lpass-rx-macro.yaml
index 1de11e7f33..79c6f8da13 100644
--- a/dts/Bindings/sound/qcom,lpass-rx-macro.yaml
+++ b/dts/Bindings/sound/qcom,lpass-rx-macro.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/qcom,lpass-rx-macro.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LPASS(Low Power Audio Subsystem) RX Macro audio codec DT bindings
+title: LPASS(Low Power Audio Subsystem) RX Macro audio codec
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -43,8 +46,7 @@ properties:
           - const: fsgen
 
   clock-output-names:
-    items:
-      - const: mclk
+    maxItems: 1
 
   power-domains:
     maxItems: 2
@@ -59,7 +61,7 @@ required:
   - reg
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/qcom,lpass-tx-macro.yaml b/dts/Bindings/sound/qcom,lpass-tx-macro.yaml
index de8297b358..66431aade3 100644
--- a/dts/Bindings/sound/qcom,lpass-tx-macro.yaml
+++ b/dts/Bindings/sound/qcom,lpass-tx-macro.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/qcom,lpass-tx-macro.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LPASS(Low Power Audio Subsystem) TX Macro audio codec DT bindings
+title: LPASS(Low Power Audio Subsystem) TX Macro audio codec
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -43,8 +46,7 @@ properties:
           - const: fsgen
 
   clock-output-names:
-    items:
-      - const: mclk
+    maxItems: 1
 
   power-domains:
     maxItems: 2
@@ -63,7 +65,7 @@ required:
   - reg
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/qcom,lpass-va-macro.yaml b/dts/Bindings/sound/qcom,lpass-va-macro.yaml
index 9f473c08cb..26f0343b5a 100644
--- a/dts/Bindings/sound/qcom,lpass-va-macro.yaml
+++ b/dts/Bindings/sound/qcom,lpass-va-macro.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/qcom,lpass-va-macro.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -39,8 +42,7 @@ properties:
           - const: mclk
 
   clock-output-names:
-    items:
-      - const: fsgen
+    maxItems: 1
 
   power-domains:
     maxItems: 2
@@ -62,7 +64,7 @@ required:
   - reg
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/qcom,lpass-wsa-macro.yaml b/dts/Bindings/sound/qcom,lpass-wsa-macro.yaml
index 4959ad658e..2bf8d082f8 100644
--- a/dts/Bindings/sound/qcom,lpass-wsa-macro.yaml
+++ b/dts/Bindings/sound/qcom,lpass-wsa-macro.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/qcom,lpass-wsa-macro.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -38,8 +41,7 @@ properties:
       - const: fsgen
 
   clock-output-names:
-    items:
-      - const: mclk
+    maxItems: 1
 
   qcom,dmic-sample-rate:
     description: dmic sample rate
@@ -53,7 +55,7 @@ required:
   - reg
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/qcom,q6adm-routing.yaml b/dts/Bindings/sound/qcom,q6adm-routing.yaml
index d0f7a79e24..3f11d2e183 100644
--- a/dts/Bindings/sound/qcom,q6adm-routing.yaml
+++ b/dts/Bindings/sound/qcom,q6adm-routing.yaml
@@ -14,6 +14,9 @@ description:
   Qualcomm Audio Device Manager (Q6ADM) routing node represents routing
   specific configuration.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -26,27 +29,11 @@ required:
   - compatible
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/soc/qcom,apr.h>
-    #include <dt-bindings/sound/qcom,q6asm.h>
-
-    apr {
-        compatible = "qcom,apr-v2";
-        qcom,domain = <APR_DOMAIN_ADSP>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        service@8 {
-            compatible = "qcom,q6adm";
-            reg = <APR_SVC_ADM>;
-            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-            routing {
-                compatible = "qcom,q6adm-routing";
-                #sound-dai-cells = <0>;
-            };
-        };
+    routing {
+        compatible = "qcom,q6adm-routing";
+        #sound-dai-cells = <0>;
     };
diff --git a/dts/Bindings/sound/qcom,q6adm.yaml b/dts/Bindings/sound/qcom,q6adm.yaml
new file mode 100644
index 0000000000..fe14a97ea6
--- /dev/null
+++ b/dts/Bindings/sound/qcom,q6adm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Device Manager (Q6ADM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6adm
+
+  routing:
+    type: object
+    $ref: /schemas/sound/qcom,q6adm-routing.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP LPASS audio routing
+
+required:
+  - compatible
+  - routing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@8 {
+            compatible = "qcom,q6adm";
+            reg = <APR_SVC_ADM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            routing {
+                compatible = "qcom,q6adm-routing";
+                #sound-dai-cells = <0>;
+            };
+        };
+    };
diff --git a/dts/Bindings/sound/qcom,q6afe.yaml b/dts/Bindings/sound/qcom,q6afe.yaml
new file mode 100644
index 0000000000..297aa362aa
--- /dev/null
+++ b/dts/Bindings/sound/qcom,q6afe.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6afe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio FrontEnd (Q6AFE)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe
+
+  clock-controller:
+    $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP LPASS clock controller
+
+  dais:
+    type: object
+    $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+required:
+  - compatible
+  - dais
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@4 {
+            compatible = "qcom,q6afe";
+            reg = <APR_SVC_AFE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6afe-clocks";
+                #clock-cells = <2>;
+            };
+
+            dais {
+                compatible = "qcom,q6afe-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@22 {
+                    reg = <QUATERNARY_MI2S_RX>;
+                    qcom,sd-lines = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/sound/qcom,q6apm-dai.yaml b/dts/Bindings/sound/qcom,q6apm-dai.yaml
index 24f7bf2bfd..a53c9ef938 100644
--- a/dts/Bindings/sound/qcom,q6apm-dai.yaml
+++ b/dts/Bindings/sound/qcom,q6apm-dai.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm Audio Process Manager Digital Audio Interfaces binding
+title: Qualcomm Audio Process Manager Digital Audio Interfaces
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -27,20 +27,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/soc/qcom,gpr.h>
-    gpr {
-        compatible = "qcom,gpr";
-        #address-cells = <1>;
-        #size-cells = <0>;
-        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-
-        service@1 {
-            compatible = "qcom,q6apm";
-            reg = <1>;
-
-            dais {
-                compatible = "qcom,q6apm-dais";
-                iommus = <&apps_smmu 0x1801 0x0>;
-            };
-        };
+    dais {
+        compatible = "qcom,q6apm-dais";
+        iommus = <&apps_smmu 0x1801 0x0>;
     };
diff --git a/dts/Bindings/sound/qcom,q6apm-lpass-dais.yaml b/dts/Bindings/sound/qcom,q6apm-lpass-dais.yaml
new file mode 100644
index 0000000000..894e653d37
--- /dev/null
+++ b/dts/Bindings/sound/qcom,q6apm-lpass-dais.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6apm-lpass-dais.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm DSP LPASS (Low Power Audio SubSystem) Audio Ports
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6apm-lpass-dais
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dais {
+        compatible = "qcom,q6apm-lpass-dais";
+        #sound-dai-cells = <1>;
+    };
diff --git a/dts/Bindings/sound/qcom,q6apm.yaml b/dts/Bindings/sound/qcom,q6apm.yaml
new file mode 100644
index 0000000000..ef1965aca2
--- /dev/null
+++ b/dts/Bindings/sound/qcom,q6apm.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6apm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Process Manager (Q6APM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6apm
+
+  bedais:
+    type: object
+    $ref: /schemas/sound/qcom,q6apm-lpass-dais.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+  dais:
+    type: object
+    $ref: /schemas/sound/qcom,q6apm-dai.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - bedais
+  - dais
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+
+    gpr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@1 {
+            reg = <GPR_APM_MODULE_IID>;
+            compatible = "qcom,q6apm";
+            #sound-dai-cells = <0>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6apm-dais";
+                iommus = <&apps_smmu 0x1801 0x0>;
+            };
+
+            bedais {
+                compatible = "qcom,q6apm-lpass-dais";
+                #sound-dai-cells = <1>;
+            };
+        };
+    };
diff --git a/dts/Bindings/sound/qcom,q6asm-dais.yaml b/dts/Bindings/sound/qcom,q6asm-dais.yaml
index 8deb8ffb14..0110b38f6d 100644
--- a/dts/Bindings/sound/qcom,q6asm-dais.yaml
+++ b/dts/Bindings/sound/qcom,q6asm-dais.yaml
@@ -73,40 +73,24 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/soc/qcom,apr.h>
-    #include <dt-bindings/sound/qcom,q6asm.h>
-
-    apr {
-        compatible = "qcom,apr-v2";
-        qcom,domain = <APR_DOMAIN_ADSP>;
+    dais {
+        compatible = "qcom,q6asm-dais";
+        iommus = <&apps_smmu 0x1821 0x0>;
         #address-cells = <1>;
         #size-cells = <0>;
+        #sound-dai-cells = <1>;
+
+        dai@0 {
+            reg = <0>;
+        };
+
+        dai@1 {
+            reg = <1>;
+        };
 
-        service@7 {
-            compatible = "qcom,q6asm";
-            reg = <APR_SVC_ASM>;
-            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-            dais {
-                compatible = "qcom,q6asm-dais";
-                iommus = <&apps_smmu 0x1821 0x0>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-                #sound-dai-cells = <1>;
-
-                dai@0 {
-                    reg = <0>;
-                };
-
-                dai@1 {
-                    reg = <1>;
-                };
-
-                dai@2 {
-                    reg = <2>;
-                    is-compress-dai;
-                    direction = <1>;
-                };
-            };
+        dai@2 {
+            reg = <2>;
+            is-compress-dai;
+            direction = <1>;
         };
     };
diff --git a/dts/Bindings/sound/qcom,q6asm.yaml b/dts/Bindings/sound/qcom,q6asm.yaml
new file mode 100644
index 0000000000..cb49f9667c
--- /dev/null
+++ b/dts/Bindings/sound/qcom,q6asm.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6asm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Stream Manager (Q6ASM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6asm
+
+  dais:
+    type: object
+    $ref: /schemas/sound/qcom,q6asm-dais.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+required:
+  - compatible
+  - dais
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@7 {
+            compatible = "qcom,q6asm";
+            reg = <APR_SVC_ASM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6asm-dais";
+                iommus = <&apps_smmu 0x1821 0x0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@0 {
+                    reg = <0>;
+                };
+
+                dai@1 {
+                    reg = <1>;
+                };
+
+                dai@2 {
+                    reg = <2>;
+                    is-compress-dai;
+                    direction = <1>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/sound/qcom,q6core.yaml b/dts/Bindings/sound/qcom,q6core.yaml
new file mode 100644
index 0000000000..e240712de9
--- /dev/null
+++ b/dts/Bindings/sound/qcom,q6core.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6core.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Core (Q6Core)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6core
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@3 {
+            compatible = "qcom,q6core";
+            reg = <APR_SVC_ADSP_CORE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+    };
diff --git a/dts/Bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/dts/Bindings/sound/qcom,q6dsp-lpass-clocks.yaml
index fd567d2041..1168410f6f 100644
--- a/dts/Bindings/sound/qcom,q6dsp-lpass-clocks.yaml
+++ b/dts/Bindings/sound/qcom,q6dsp-lpass-clocks.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm DSP LPASS Clock Controller binding
+title: Qualcomm DSP LPASS Clock Controller
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -35,41 +35,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/soc/qcom,apr.h>
-    #include <dt-bindings/sound/qcom,q6afe.h>
-    apr {
-        compatible = "qcom,apr-v2";
-        qcom,domain = <APR_DOMAIN_ADSP>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        service@4 {
-            compatible = "qcom,q6afe";
-            reg = <APR_SVC_AFE>;
-            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-            clock-controller {
-                compatible = "qcom,q6afe-clocks";
-                #clock-cells = <2>;
-            };
-        };
-    };
-
-  - |
-    #include <dt-bindings/soc/qcom,gpr.h>
-    gpr {
-        compatible = "qcom,gpr";
-        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        service@2 {
-            reg = <GPR_PRM_MODULE_IID>;
-            compatible = "qcom,q6prm";
-
-            clock-controller {
-                compatible = "qcom,q6prm-lpass-clocks";
-                #clock-cells = <2>;
-            };
-        };
+    clock-controller {
+        compatible = "qcom,q6afe-clocks";
+        #clock-cells = <2>;
     };
diff --git a/dts/Bindings/sound/qcom,q6dsp-lpass-ports.yaml b/dts/Bindings/sound/qcom,q6dsp-lpass-ports.yaml
index e53fc0960a..d06f188030 100644
--- a/dts/Bindings/sound/qcom,q6dsp-lpass-ports.yaml
+++ b/dts/Bindings/sound/qcom,q6dsp-lpass-ports.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports binding
+title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -16,7 +16,6 @@ properties:
   compatible:
     enum:
       - qcom,q6afe-dais
-      - qcom,q6apm-lpass-dais
 
   '#sound-dai-cells':
     const: 1
@@ -150,54 +149,16 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/soc/qcom,apr.h>
-    #include <dt-bindings/sound/qcom,q6afe.h>
-    apr {
-        compatible = "qcom,apr-v2";
-        #address-cells = <1>;
-        #size-cells = <0>;
-        qcom,domain = <APR_DOMAIN_ADSP>;
-
-        service@4 {
-            compatible = "qcom,q6afe";
-            reg = <APR_SVC_AFE>;
-            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-            dais {
-                compatible = "qcom,q6afe-dais";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                #sound-dai-cells = <1>;
-
-                dai@22 {
-                    reg = <QUATERNARY_MI2S_RX>;
-                    qcom,sd-lines = <0 1 2 3>;
-                };
-            };
-        };
-    };
-  - |
-    #include <dt-bindings/soc/qcom,gpr.h>
-    gpr {
-        compatible = "qcom,gpr";
+    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+    dais {
+        compatible = "qcom,q6afe-dais";
         #address-cells = <1>;
         #size-cells = <0>;
-        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-
-        service@1 {
-            compatible = "qcom,q6apm";
-            reg = <GPR_APM_MODULE_IID>;
-
-            dais {
-                compatible = "qcom,q6apm-lpass-dais";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                #sound-dai-cells = <1>;
-
-                dai@22 {
-                    reg = <QUATERNARY_MI2S_RX>;
-                    qcom,sd-lines = <0 1 2 3>;
-                };
-            };
+        #sound-dai-cells = <1>;
+
+        dai@22 {
+            reg = <QUATERNARY_MI2S_RX>;
+            qcom,sd-lines = <0 1 2 3>;
         };
     };
diff --git a/dts/Bindings/sound/qcom,q6prm.yaml b/dts/Bindings/sound/qcom,q6prm.yaml
new file mode 100644
index 0000000000..f6dbb1267b
--- /dev/null
+++ b/dts/Bindings/sound/qcom,q6prm.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6prm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Proxy Resource Manager (Q6PRM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6prm
+
+  clock-controller:
+    $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP LPASS clock controller
+
+required:
+  - compatible
+  - clock-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+
+    gpr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@2 {
+            reg = <GPR_PRM_MODULE_IID>;
+            compatible = "qcom,q6prm";
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6prm-lpass-clocks";
+                #clock-cells = <2>;
+            };
+        };
+    };
diff --git a/dts/Bindings/sound/qcom,wcd9335.txt b/dts/Bindings/sound/qcom,wcd9335.txt
index 5d6ea66a86..1f75feec3d 100644
--- a/dts/Bindings/sound/qcom,wcd9335.txt
+++ b/dts/Bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git a/dts/Bindings/sound/qcom,wcd934x.yaml b/dts/Bindings/sound/qcom,wcd934x.yaml
index 8ca19f2b0b..184e8ccbdd 100644
--- a/dts/Bindings/sound/qcom,wcd934x.yaml
+++ b/dts/Bindings/sound/qcom,wcd934x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
+title: Qualcomm WCD9340/WCD9341 Audio Codec
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
diff --git a/dts/Bindings/sound/qcom,wcd938x-sdw.yaml b/dts/Bindings/sound/qcom,wcd938x-sdw.yaml
index 49a267b306..b430dd3e18 100644
--- a/dts/Bindings/sound/qcom,wcd938x-sdw.yaml
+++ b/dts/Bindings/sound/qcom,wcd938x-sdw.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for Qualcomm SoundWire Slave devices on WCD9380/WCD9385
+title: Qualcomm SoundWire Slave devices on WCD9380/WCD9385
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
diff --git a/dts/Bindings/sound/qcom,wcd938x.yaml b/dts/Bindings/sound/qcom,wcd938x.yaml
index 51547190f7..018565793a 100644
--- a/dts/Bindings/sound/qcom,wcd938x.yaml
+++ b/dts/Bindings/sound/qcom,wcd938x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
+title: Qualcomm WCD9380/WCD9385 Audio Codec
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -13,6 +13,9 @@ description: |
   Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
   It has RX and TX Soundwire slave devices.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -106,7 +109,7 @@ required:
   - qcom,micbias4-microvolt
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/qcom,wsa881x.yaml b/dts/Bindings/sound/qcom,wsa881x.yaml
index ea44d03e58..d702b48932 100644
--- a/dts/Bindings/sound/qcom,wsa881x.yaml
+++ b/dts/Bindings/sound/qcom,wsa881x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+title: Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
diff --git a/dts/Bindings/sound/qcom,wsa883x.yaml b/dts/Bindings/sound/qcom,wsa883x.yaml
index 6113f65f29..ba572a7f4f 100644
--- a/dts/Bindings/sound/qcom,wsa883x.yaml
+++ b/dts/Bindings/sound/qcom,wsa883x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for The Qualcomm WSA8830/WSA8832/WSA8835
+title: Qualcomm WSA8830/WSA8832/WSA8835
   smart speaker amplifier
 
 maintainers:
@@ -15,6 +15,9 @@ description: |
   Their primary operating mode uses a SoundWire digital audio
   interface. This binding is for SoundWire interface.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: sdw10217020200
@@ -23,7 +26,7 @@ properties:
     maxItems: 1
 
   powerdown-gpios:
-    description: GPIO spec for Powerdown/Shutdown line to use
+    description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
   vdd-supply:
@@ -43,10 +46,12 @@ required:
   - "#thermal-sensor-cells"
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     soundwire-controller@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
@@ -55,19 +60,21 @@ examples:
         speaker@0,1 {
             compatible = "sdw10217020200";
             reg = <0 1>;
-            powerdown-gpios = <&tlmm 1 0>;
+            powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
             vdd-supply = <&vreg_s10b_1p8>;
             #thermal-sensor-cells = <0>;
             #sound-dai-cells = <0>;
+            sound-name-prefix = "SpkrLeft";
         };
 
         speaker@0,2 {
             compatible = "sdw10217020200";
             reg = <0 2>;
-            powerdown-gpios = <&tlmm 89 0>;
+            powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
             vdd-supply = <&vreg_s10b_1p8>;
             #thermal-sensor-cells = <0>;
             #sound-dai-cells = <0>;
+            sound-name-prefix = "SpkrRight";
         };
     };
 
diff --git a/dts/Bindings/sound/realtek,rt1015p.yaml b/dts/Bindings/sound/realtek,rt1015p.yaml
index ea7d4900ee..7dac9e6f7f 100644
--- a/dts/Bindings/sound/realtek,rt1015p.yaml
+++ b/dts/Bindings/sound/realtek,rt1015p.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/realtek,rt1015p.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek rt1015p codec devicetree bindings
+title: Realtek rt1015p codec
 
 maintainers:
   - Tzung-Bi Shih <tzungbi@kernel.org>
diff --git a/dts/Bindings/sound/realtek,rt5682s.yaml b/dts/Bindings/sound/realtek,rt5682s.yaml
index ca5b8987b7..ecfa7a5768 100644
--- a/dts/Bindings/sound/realtek,rt5682s.yaml
+++ b/dts/Bindings/sound/realtek,rt5682s.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek rt5682s codec devicetree bindings
+title: Realtek rt5682s codec
 
 maintainers:
   - Derek Fang <derek.fang@realtek.com>
@@ -12,6 +12,9 @@ maintainers:
 description: |
   Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: realtek,rt5682s
@@ -87,11 +90,32 @@ properties:
     maxItems: 2
     description: Name given for DAI word clock and bit clock outputs.
 
-additionalProperties: false
+  "#sound-dai-cells":
+    const: 1
+
+  AVDD-supply:
+    description: Regulator supplying analog power through the AVDD pin.
+
+  MICVDD-supply:
+    description: Regulator supplying power for the microphone bias through the
+      MICVDD pin.
+
+  DBVDD-supply:
+    description: Regulator supplying I/O power through the DBVDD pin.
+
+  LDO1-IN-supply:
+    description: Regulator supplying power to the digital core and charge pump
+      through the LDO1_IN pin.
+
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
+  - AVDD-supply
+  - MICVDD-supply
+  - DBVDD-supply
+  - LDO1-IN-supply
 
 examples:
   - |
@@ -117,5 +141,10 @@ examples:
 
             clocks = <&osc>;
             clock-names = "mclk";
+
+            AVDD-supply = <&avdd_reg>;
+            MICVDD-supply = <&micvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+            LDO1-IN-supply = <&ldo1_in_reg>;
         };
     };
diff --git a/dts/Bindings/sound/renesas,fsi.yaml b/dts/Bindings/sound/renesas,fsi.yaml
index 0dd3f73613..df91991699 100644
--- a/dts/Bindings/sound/renesas,fsi.yaml
+++ b/dts/Bindings/sound/renesas,fsi.yaml
@@ -9,6 +9,9 @@ title: Renesas FIFO-buffered Serial Interface (FSI)
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   $nodename:
     pattern: "^sound@.*"
@@ -64,7 +67,7 @@ required:
   - power-domains
   - '#sound-dai-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/renesas,rsnd.yaml b/dts/Bindings/sound/renesas,rsnd.yaml
index 679a246dd6..cb90463c72 100644
--- a/dts/Bindings/sound/renesas,rsnd.yaml
+++ b/dts/Bindings/sound/renesas,rsnd.yaml
@@ -115,7 +115,7 @@ properties:
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     patternProperties:
-      port(@[0-9a-f]+)?:
+      '^port(@[0-9a-f]+)?$':
         $ref: audio-graph-port.yaml#
         unevaluatedProperties: false
 
@@ -274,6 +274,7 @@ required:
   - "#sound-dai-cells"
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -304,7 +305,7 @@ allOf:
               - ssi
               - audmapp
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/renesas,rz-ssi.yaml b/dts/Bindings/sound/renesas,rz-ssi.yaml
index 0d98403751..196881d943 100644
--- a/dts/Bindings/sound/renesas,rz-ssi.yaml
+++ b/dts/Bindings/sound/renesas,rz-ssi.yaml
@@ -9,6 +9,9 @@ title: Renesas RZ/{G2L,V2L} ASoC Sound Serial Interface (SSIF-2)
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     items:
@@ -90,7 +93,7 @@ required:
   - resets
   - '#sound-dai-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/richtek,rt9120.yaml b/dts/Bindings/sound/richtek,rt9120.yaml
index 5655ca5682..a1242e8e06 100644
--- a/dts/Bindings/sound/richtek,rt9120.yaml
+++ b/dts/Bindings/sound/richtek,rt9120.yaml
@@ -16,6 +16,9 @@ description: |
   applications like as TV, monitors. home entertainment, electronic music
   equipment.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -42,7 +45,7 @@ required:
   - dvdd-supply
   - '#sound-dai-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/rockchip,i2s-tdm.yaml b/dts/Bindings/sound/rockchip,i2s-tdm.yaml
index 6a7c004bef..4c95895de7 100644
--- a/dts/Bindings/sound/rockchip,i2s-tdm.yaml
+++ b/dts/Bindings/sound/rockchip,i2s-tdm.yaml
@@ -14,6 +14,9 @@ description:
 maintainers:
   - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -21,6 +24,7 @@ properties:
       - rockchip,rk1808-i2s-tdm
       - rockchip,rk3308-i2s-tdm
       - rockchip,rk3568-i2s-tdm
+      - rockchip,rk3588-i2s-tdm
       - rockchip,rv1126-i2s-tdm
 
   reg:
@@ -135,10 +139,9 @@ required:
   - clock-names
   - resets
   - reset-names
-  - rockchip,grf
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/rockchip,pdm.yaml b/dts/Bindings/sound/rockchip,pdm.yaml
index 22e1cf6c05..ff9e400494 100644
--- a/dts/Bindings/sound/rockchip,pdm.yaml
+++ b/dts/Bindings/sound/rockchip,pdm.yaml
@@ -16,6 +16,9 @@ description:
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -83,7 +86,7 @@ required:
   - dma-names
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/rockchip,rk3328-codec.yaml b/dts/Bindings/sound/rockchip,rk3328-codec.yaml
index 75b3b33b5f..5cdb8bcc68 100644
--- a/dts/Bindings/sound/rockchip,rk3328-codec.yaml
+++ b/dts/Bindings/sound/rockchip,rk3328-codec.yaml
@@ -8,6 +8,9 @@ title: Rockchip rk3328 internal codec
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
+allOf:
+  - $ref: dai-common.yaml#
+
 
 properties:
   compatible:
@@ -53,7 +56,7 @@ required:
   - rockchip,grf
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/rockchip-i2s.yaml b/dts/Bindings/sound/rockchip-i2s.yaml
index 7e36e389e9..1cb4da3006 100644
--- a/dts/Bindings/sound/rockchip-i2s.yaml
+++ b/dts/Bindings/sound/rockchip-i2s.yaml
@@ -13,6 +13,9 @@ description:
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -111,7 +114,7 @@ required:
   - dma-names
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/rockchip-spdif.yaml b/dts/Bindings/sound/rockchip-spdif.yaml
index d0a24bf928..4f51b2fa82 100644
--- a/dts/Bindings/sound/rockchip-spdif.yaml
+++ b/dts/Bindings/sound/rockchip-spdif.yaml
@@ -75,17 +75,18 @@ required:
   - dma-names
   - "#sound-dai-cells"
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: rockchip,rk3288-spdif
-
-then:
-  required:
-    - rockchip,grf
-
-additionalProperties: false
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-spdif
+    then:
+      required:
+        - rockchip,grf
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/rohm,bd28623.yaml b/dts/Bindings/sound/rohm,bd28623.yaml
index 859ce64da1..5abcf92bc4 100644
--- a/dts/Bindings/sound/rohm,bd28623.yaml
+++ b/dts/Bindings/sound/rohm,bd28623.yaml
@@ -14,6 +14,9 @@ description:
 maintainers:
   - Katsuhiro Suzuki <katsuhiro@katsuster.net>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: rohm,bd28623
@@ -50,7 +53,7 @@ required:
   - VCCP2-supply
   - "#sound-dai-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/rt5659.txt b/dts/Bindings/sound/rt5659.txt
index 013f534fa0..8f3f62c022 100644
--- a/dts/Bindings/sound/rt5659.txt
+++ b/dts/Bindings/sound/rt5659.txt
@@ -42,7 +42,7 @@ Optional properties:
 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
 - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
 
-- sound-name-prefix: Please refer to name-prefix.yaml
+- sound-name-prefix: Please refer to dai-common.yaml
 
 - ports: A Codec may have a single or multiple I2S interfaces. These
   interfaces on Codec side can be described under 'ports' or 'port'.
diff --git a/dts/Bindings/sound/rt5682.txt b/dts/Bindings/sound/rt5682.txt
index c5f2b8febc..5e1d08de18 100644
--- a/dts/Bindings/sound/rt5682.txt
+++ b/dts/Bindings/sound/rt5682.txt
@@ -8,6 +8,21 @@ Required properties:
 
 - reg : The I2C address of the device.
 
+- AVDD-supply: phandle to the regulator supplying analog power through the
+  AVDD pin
+
+- MICVDD-supply: phandle to the regulator supplying power for the microphone
+  bias through the MICVDD pin. Either MICVDD or VBAT should be present.
+
+- VBAT-supply: phandle to the regulator supplying battery power through the
+  VBAT pin. Either MICVDD or VBAT should be present.
+
+- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD
+  pin.
+
+- LDO1-IN-supply: phandle to the regulator supplying power to the digital core
+  and charge pump through the LDO1_IN pin.
+
 Optional properties:
 
 - interrupts : The CODEC's interrupt output.
@@ -46,7 +61,7 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
-- #sound-dai-cells: Should be set to '<0>'.
+- #sound-dai-cells: Should be set to '<1>'.
 
 Pins on the device (for linking into audio routes) for RT5682:
 
@@ -75,4 +90,9 @@ rt5682 {
 
 	clocks = <&osc>;
 	clock-names = "mclk";
+
+	AVDD-supply = <&avdd_reg>;
+	MICVDD-supply = <&micvdd_reg>;
+	DBVDD-supply = <&dbvdd_reg>;
+	LDO1-IN-supply = <&ldo1_in_reg>;
 };
diff --git a/dts/Bindings/sound/samsung-i2s.yaml b/dts/Bindings/sound/samsung-i2s.yaml
index 84c4d6cba5..8d5dcf9cd4 100644
--- a/dts/Bindings/sound/samsung-i2s.yaml
+++ b/dts/Bindings/sound/samsung-i2s.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     description: |
@@ -124,7 +127,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/sgtl5000.yaml b/dts/Bindings/sound/sgtl5000.yaml
index 2bc7f00ce4..02059d66b0 100644
--- a/dts/Bindings/sound/sgtl5000.yaml
+++ b/dts/Bindings/sound/sgtl5000.yaml
@@ -9,6 +9,9 @@ title: Freescale SGTL5000 Stereo Codec
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: fsl,sgtl5000
@@ -88,7 +91,7 @@ required:
   - VDDA-supply
   - VDDIO-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/simple-audio-amplifier.yaml b/dts/Bindings/sound/simple-audio-amplifier.yaml
index 5428ba9e23..5db1f989d0 100644
--- a/dts/Bindings/sound/simple-audio-amplifier.yaml
+++ b/dts/Bindings/sound/simple-audio-amplifier.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/sound/simple-audio-mux.yaml b/dts/Bindings/sound/simple-audio-mux.yaml
index b5fc35ee9b..9f319caf3d 100644
--- a/dts/Bindings/sound/simple-audio-mux.yaml
+++ b/dts/Bindings/sound/simple-audio-mux.yaml
@@ -14,7 +14,7 @@ description: |
   their input line is connected to the output line.
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/sound/snps,designware-i2s.yaml b/dts/Bindings/sound/snps,designware-i2s.yaml
index 4b07958190..56e623d4e1 100644
--- a/dts/Bindings/sound/snps,designware-i2s.yaml
+++ b/dts/Bindings/sound/snps,designware-i2s.yaml
@@ -50,21 +50,21 @@ properties:
       - const: rx
     minItems: 1
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: canaan,k210-i2s
-
-then:
-  properties:
-    "#sound-dai-cells":
-      const: 1
-
-else:
-  properties:
-    "#sound-dai-cells":
-      const: 0
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: canaan,k210-i2s
+    then:
+      properties:
+        "#sound-dai-cells":
+          const: 1
+    else:
+      properties:
+        "#sound-dai-cells":
+          const: 0
 
 required:
   - compatible
diff --git a/dts/Bindings/sound/socionext,uniphier-aio.yaml b/dts/Bindings/sound/socionext,uniphier-aio.yaml
index 70f62ecd6e..9cf0efaed8 100644
--- a/dts/Bindings/sound/socionext,uniphier-aio.yaml
+++ b/dts/Bindings/sound/socionext,uniphier-aio.yaml
@@ -9,6 +9,9 @@ title: UniPhier AIO audio system
 maintainers:
   - <alsa-devel@alsa-project.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -70,7 +73,7 @@ patternProperties:
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/sound/socionext,uniphier-evea.yaml b/dts/Bindings/sound/socionext,uniphier-evea.yaml
index be6acfda99..985277648d 100644
--- a/dts/Bindings/sound/socionext,uniphier-evea.yaml
+++ b/dts/Bindings/sound/socionext,uniphier-evea.yaml
@@ -9,6 +9,9 @@ title: UniPhier EVEA SoC-internal sound codec
 maintainers:
   - <alsa-devel@alsa-project.org>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: socionext,uniphier-evea
@@ -48,7 +51,7 @@ patternProperties:
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/sound/st,stm32-i2s.yaml b/dts/Bindings/sound/st,stm32-i2s.yaml
index d3966ae04a..a040d4d314 100644
--- a/dts/Bindings/sound/st,stm32-i2s.yaml
+++ b/dts/Bindings/sound/st,stm32-i2s.yaml
@@ -13,6 +13,9 @@ description:
   The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
   Only some SPI instances support I2S.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -68,7 +71,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/st,stm32-spdifrx.yaml b/dts/Bindings/sound/st,stm32-spdifrx.yaml
index 837e830c47..bc48151b9a 100644
--- a/dts/Bindings/sound/st,stm32-spdifrx.yaml
+++ b/dts/Bindings/sound/st,stm32-spdifrx.yaml
@@ -13,6 +13,9 @@ description: |
   The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
   IEC-60958 and IEC-61937.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -57,7 +60,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/tas2562.yaml b/dts/Bindings/sound/tas2562.yaml
index 30f6b029ac..1085592cef 100644
--- a/dts/Bindings/sound/tas2562.yaml
+++ b/dts/Bindings/sound/tas2562.yaml
@@ -22,6 +22,9 @@ description: |
     https://www.ti.com/lit/gpn/tas2564
     https://www.ti.com/lit/gpn/tas2110
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -58,7 +61,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/tas2770.yaml b/dts/Bindings/sound/tas2770.yaml
index bc90e72bf7..982949ba8a 100644
--- a/dts/Bindings/sound/tas2770.yaml
+++ b/dts/Bindings/sound/tas2770.yaml
@@ -16,6 +16,9 @@ description: |
   Integrated speaker voltage and current sense provides for
   real time monitoring of loudspeaker behavior.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -60,7 +63,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/tas27xx.yaml b/dts/Bindings/sound/tas27xx.yaml
index 66a0df8850..0957dd435b 100644
--- a/dts/Bindings/sound/tas27xx.yaml
+++ b/dts/Bindings/sound/tas27xx.yaml
@@ -16,6 +16,9 @@ description: |
   loudspeakers. Integrated speaker voltage and current sense provides
   for real time monitoring of loudspeaker behavior.
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -53,7 +56,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/ti,src4xxx.yaml b/dts/Bindings/sound/ti,src4xxx.yaml
index 9681b72b49..27230c682d 100644
--- a/dts/Bindings/sound/ti,src4xxx.yaml
+++ b/dts/Bindings/sound/ti,src4xxx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/ti,src4xxx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments SRC4392 Device Tree Bindings
+title: Texas Instruments SRC4392
 
 description: |
   The SRC4392 is a digital audio codec that can be connected via
@@ -14,7 +14,7 @@ maintainers:
   - Matt Flax <flatmax@flatmax.com>
 
 allOf:
-  - $ref: name-prefix.yaml#
+  - $ref: dai-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/sound/ti,tlv320adc3xxx.yaml b/dts/Bindings/sound/ti,tlv320adc3xxx.yaml
index 83936f594d..ede14ca2c0 100644
--- a/dts/Bindings/sound/ti,tlv320adc3xxx.yaml
+++ b/dts/Bindings/sound/ti,tlv320adc3xxx.yaml
@@ -14,6 +14,9 @@ description: |
   https://www.ti.com/product/TLV320ADC3001
   https://www.ti.com/product/TLV320ADC3101
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -106,7 +109,7 @@ required:
   - reg
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/tlv320adcx140.yaml b/dts/Bindings/sound/tlv320adcx140.yaml
index ee69861486..6b82140711 100644
--- a/dts/Bindings/sound/tlv320adcx140.yaml
+++ b/dts/Bindings/sound/tlv320adcx140.yaml
@@ -109,38 +109,6 @@ properties:
       maximum: 7
     default: [0, 0, 0, 0]
 
-  ti,asi-tx-drive:
-    type: boolean
-    description: |
-      When set the device will set the Tx ASI output to a Hi-Z state for unused
-      data cycles. Default is to drive the output low on unused ASI cycles.
-
-patternProperties:
-  '^ti,gpo-config-[1-4]$':
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-    description: |
-       Defines the configuration and output driver for the general purpose
-       output pins (GPO).  These values are pairs, the first value is for the
-       configuration type and the second value is for the output drive type.
-       The array is defined as <GPO_CFG GPO_DRV>
-
-       GPO output configuration can be one of the following:
-
-       0 - (default) disabled
-       1 - GPOX is configured as a general-purpose output (GPO)
-       2 - GPOX is configured as a device interrupt output (IRQ)
-       3 - GPOX is configured as a secondary ASI output (SDOUT2)
-       4 - GPOX is configured as a PDM clock output (PDMCLK)
-
-       GPO output drive configuration for the GPO pins can be one of the following:
-
-       0d - (default) Hi-Z output
-       1d - Drive active low and active high
-       2d - Drive active low and weak high
-       3d - Drive active low and Hi-Z
-       4d - Drive weak low and active high
-       5d - Drive Hi-Z and active high
-
   ti,gpio-config:
     description: |
        Defines the configuration and output drive for the General Purpose
@@ -183,6 +151,38 @@ patternProperties:
       maximum: 15
     default: [2, 2]
 
+  ti,asi-tx-drive:
+    type: boolean
+    description: |
+      When set the device will set the Tx ASI output to a Hi-Z state for unused
+      data cycles. Default is to drive the output low on unused ASI cycles.
+
+patternProperties:
+  '^ti,gpo-config-[1-4]$':
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+       Defines the configuration and output driver for the general purpose
+       output pins (GPO).  These values are pairs, the first value is for the
+       configuration type and the second value is for the output drive type.
+       The array is defined as <GPO_CFG GPO_DRV>
+
+       GPO output configuration can be one of the following:
+
+       0 - (default) disabled
+       1 - GPOX is configured as a general-purpose output (GPO)
+       2 - GPOX is configured as a device interrupt output (IRQ)
+       3 - GPOX is configured as a secondary ASI output (SDOUT2)
+       4 - GPOX is configured as a PDM clock output (PDMCLK)
+
+       GPO output drive configuration for the GPO pins can be one of the following:
+
+       0d - (default) Hi-Z output
+       1d - Drive active low and active high
+       2d - Drive active low and weak high
+       3d - Drive active low and Hi-Z
+       4d - Drive weak low and active high
+       5d - Drive Hi-Z and active high
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/sound/wlf,arizona.yaml b/dts/Bindings/sound/wlf,arizona.yaml
index 1627c0bb69..8156f30ead 100644
--- a/dts/Bindings/sound/wlf,arizona.yaml
+++ b/dts/Bindings/sound/wlf,arizona.yaml
@@ -16,6 +16,9 @@ description: |
   This document lists sound specific bindings, see the primary binding
   document ../mfd/arizona.yaml
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   '#sound-dai-cells':
     description:
diff --git a/dts/Bindings/sound/wlf,wm8731.yaml b/dts/Bindings/sound/wlf,wm8731.yaml
index 15795f63b5..858c0f6895 100644
--- a/dts/Bindings/sound/wlf,wm8731.yaml
+++ b/dts/Bindings/sound/wlf,wm8731.yaml
@@ -61,6 +61,7 @@ required:
   - DCVDD-supply
 
 allOf:
+  - $ref: dai-common.yaml#
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 unevaluatedProperties: false
diff --git a/dts/Bindings/sound/wlf,wm8940.yaml b/dts/Bindings/sound/wlf,wm8940.yaml
index 7386abb3a2..3e809217c4 100644
--- a/dts/Bindings/sound/wlf,wm8940.yaml
+++ b/dts/Bindings/sound/wlf,wm8940.yaml
@@ -9,6 +9,9 @@ title: Wolfson WM8940 Codec
 maintainers:
   - patches@opensource.cirrus.com
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   '#sound-dai-cells':
     const: 0
@@ -27,7 +30,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/wlf,wm8961.yaml b/dts/Bindings/sound/wlf,wm8961.yaml
new file mode 100644
index 0000000000..f580785455
--- /dev/null
+++ b/dts/Bindings/sound/wlf,wm8961.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8961.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8961 Ultra-Low Power Stereo CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8961
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          wm8961: codec@4a {
+                  compatible = "wlf,wm8961";
+                  reg = <0x4a>;
+                  #sound-dai-cells = <0>;
+          };
+    };
diff --git a/dts/Bindings/sound/wlf,wm8962.yaml b/dts/Bindings/sound/wlf,wm8962.yaml
index 5e172e9462..5fe0b2c9f9 100644
--- a/dts/Bindings/sound/wlf,wm8962.yaml
+++ b/dts/Bindings/sound/wlf,wm8962.yaml
@@ -9,6 +9,9 @@ title: Wolfson WM8962 Ultra-Low Power Stereo CODEC
 maintainers:
   - patches@opensource.cirrus.com
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: wlf,wm8962
@@ -87,7 +90,7 @@ required:
   - SPKVDD1-supply
   - SPKVDD2-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/wlf,wm8978.yaml b/dts/Bindings/sound/wlf,wm8978.yaml
index 1c8985d4dd..efb5f9f6cc 100644
--- a/dts/Bindings/sound/wlf,wm8978.yaml
+++ b/dts/Bindings/sound/wlf,wm8978.yaml
@@ -9,6 +9,9 @@ title: Wolfson WM8978 Codec
 maintainers:
   - patches@opensource.cirrus.com
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   '#sound-dai-cells':
     const: 0
@@ -27,7 +30,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/sound/zl38060.yaml b/dts/Bindings/sound/zl38060.yaml
index 338e2a13c7..2c5c02e345 100644
--- a/dts/Bindings/sound/zl38060.yaml
+++ b/dts/Bindings/sound/zl38060.yaml
@@ -15,6 +15,9 @@ maintainers:
   - Jaroslav Kysela <perex@perex.cz>
   - Takashi Iwai <tiwai@suse.com>
 
+allOf:
+  - $ref: dai-common.yaml#
+
 properties:
   compatible:
     const: mscc,zl38060
@@ -48,7 +51,7 @@ required:
   - gpio-controller
   - '#sound-dai-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/soundwire/qcom,sdw.txt b/dts/Bindings/soundwire/qcom,sdw.txt
deleted file mode 100644
index c85c25779e..0000000000
--- a/dts/Bindings/soundwire/qcom,sdw.txt
+++ /dev/null
@@ -1,214 +0,0 @@
-Qualcomm SoundWire Controller Bindings
-
-
-This binding describes the Qualcomm SoundWire Controller along with its
-board specific bus parameters.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
-		    Example:
-			"qcom,soundwire-v1.3.0"
-			"qcom,soundwire-v1.5.0"
-			"qcom,soundwire-v1.5.1"
-			"qcom,soundwire-v1.6.0"
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of SoundWire controller
-		    address space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller core and optional
-		    wake IRQ
-
-- interrupt-names:
-	Usage: Optional
-	Value type: boolean
-	Value type: <stringlist>
-	Definition: should be "core" for core and "wakeup" for wake interrupt.
-
-- wakeup-source:
-	Usage: Optional
-	Value type: boolean
-	Definition: should specify if SoundWire Controller is wake up capable.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "iface" for SoundWire Controller interface clock
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller interface clock
-
-- #sound-dai-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1 for digital audio interfaces on the controller.
-
-- qcom,dout-ports:
-	Usage: required
-	Value type: <u32>
-	Definition: must be count of data out ports
-
-- qcom,din-ports:
-	Usage: required
-	Value type: <u32>
-	Definition: must be count of data in ports
-
-- qcom,ports-offset1:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify payload transport window offset1 of each
-		    data port. Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-offset2:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify payload transport window offset2 of each
-		    data port. Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-sinterval-low:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should be sample interval low of each data port.
-		    Out ports followed by In ports. Used for Sample Interval
-		    calculation.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-word-length:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be size of payload channel sample.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-block-pack-mode:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be 0 or 1 to indicate the block packing mode.
-		    0 to indicate Blocks are per Channel
-		    1 to indicate Blocks are per Port.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-block-group-count:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be in range 1 to 4 to indicate how many sample
-		    intervals are combined into a payload.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-lane-control:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be in range 0 to 7 to identify which	data lane
-		    the data port uses.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-hstart:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be number identifying lowerst numbered coloum in
-		    SoundWire Frame, i.e. left edge of the Transport sub-frame
-		    for each port. Values between 0 and 15 are valid.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-hstop:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be number identifying highest numbered coloum in
-		    SoundWire Frame, i.e. the right edge of the Transport
-		    sub-frame for each port. Values between 0 and 15 are valid.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,dports-type:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be one of the following types
-		    0 for reduced port
-		    1 for simple ports
-		    2 for full port
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- reset:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: Should specify the SoundWire audio CSR reset controller interface,
-		    which is required for SoundWire version 1.6.0 and above.
-
-- reset-names:
-	Usage: optional
-	Value type: <stringlist>
-	Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
-		    controller interface.
-
-Note:
-	More Information on detail of encoding of these fields can be
-found in MIPI Alliance SoundWire 1.0 Specifications.
-
-= SoundWire devices
-Each subnode of the bus represents SoundWire device attached to it.
-The properties of these nodes are defined by the individual bindings.
-
-= EXAMPLE
-The following example represents a SoundWire controller on DB845c board
-which has controller integrated inside WCD934x codec on SDM845 SoC.
-
-soundwire: soundwire@c85 {
-	compatible = "qcom,soundwire-v1.3.0";
-	reg = <0xc85 0x20>;
-	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&wcc>;
-	clock-names = "iface";
-	resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
-	reset-names = "swr_audio_cgcr";
-	#sound-dai-cells = <1>;
-	qcom,dports-type = <0>;
-	qcom,dout-ports	= <6>;
-	qcom,din-ports	= <2>;
-	qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
-	qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
-	qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
-
-	/* Left Speaker */
-	left{
-		....
-	};
-
-	/* Right Speaker */
-	right{
-		....
-	};
-};
diff --git a/dts/Bindings/soundwire/qcom,soundwire.yaml b/dts/Bindings/soundwire/qcom,soundwire.yaml
new file mode 100644
index 0000000000..bcbfa71536
--- /dev/null
+++ b/dts/Bindings/soundwire/qcom,soundwire.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
+
+description:
+  The Qualcomm SoundWire controller along with its board specific bus parameters.
+
+properties:
+  compatible:
+    enum:
+      - qcom,soundwire-v1.3.0
+      - qcom,soundwire-v1.5.0
+      - qcom,soundwire-v1.5.1
+      - qcom,soundwire-v1.6.0
+      - qcom,soundwire-v1.7.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: specify the SoundWire controller core.
+      - description: specify the Soundwire controller wake IRQ.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: wakeup
+
+  clocks:
+    items:
+      - description: iface clock
+
+  clock-names:
+    items:
+      - const: iface
+
+  resets:
+    items:
+      - description: SWR_AUDIO_CGCR RESET
+
+  reset-names:
+    items:
+      - const: swr_audio_cgcr
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 0
+
+  wakeup-source: true
+
+  qcom,din-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data in ports
+
+  qcom,dout-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data out ports
+
+  qcom,ports-word-length:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Size of payload channel sample.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+
+  qcom,ports-sinterval-low:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Sample interval low of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+
+  qcom,ports-offset1:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Payload transport window offset1 of each data port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+
+  qcom,ports-offset2:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Payload transport window offset2 of each data port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+
+  qcom,ports-lane-control:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identify which data lane the data port uses.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+
+  qcom,ports-block-pack-mode:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Indicate the block packing mode.
+      0 to indicate Blocks are per Channel
+      1 to indicate Blocks are per Port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 1
+        - const: 0xff
+
+  qcom,ports-hstart:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identifying lowerst numbered coloum in SoundWire Frame,
+      i.e. left edge of the Transport sub-frame for each port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 15
+        - const: 0xff
+
+  qcom,ports-hstop:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identifying highest numbered coloum in SoundWire Frame,
+      i.e. the right edge of the Transport
+      sub-frame for each port. Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 15
+        - const: 0xff
+
+  qcom,ports-block-group-count:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      In range 1 to 4 to indicate how many sample intervals are combined
+      into a payload. Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 4
+        - const: 0xff
+
+  label:
+    maxItems: 1
+
+patternProperties:
+  "^.*@[0-9a-f],[0-9a-f]$":
+    type: object
+    description:
+      Child nodes for a standalone audio codec or speaker amplifier IC.
+      It has RX and TX Soundwire secondary devices.
+    properties:
+      compatible:
+        pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#sound-dai-cells'
+  - '#address-cells'
+  - '#size-cells'
+  - qcom,dout-ports
+  - qcom,din-ports
+  - qcom,ports-sinterval-low
+  - qcom,ports-offset1
+  - qcom,ports-offset2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+
+    soundwire@3210000 {
+        compatible = "qcom,soundwire-v1.6.0";
+        reg = <0x03210000 0x2000>;
+
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                     <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-names = "core", "wakeup";
+
+        clocks = <&lpass_rx_macro>;
+        clock-names = "iface";
+
+        qcom,din-ports = <0>;
+        qcom,dout-ports = <5>;
+
+        resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+        reset-names = "swr_audio_cgcr";
+
+        qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+        qcom,ports-sinterval-low =      /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+        qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+        qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+        qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+        qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+        qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+        qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+        qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+        #sound-dai-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        codec@0,4 {
+            compatible = "sdw20217010d00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
diff --git a/dts/Bindings/soundwire/soundwire-controller.yaml b/dts/Bindings/soundwire/soundwire-controller.yaml
index 4aad121eff..fdeb8af417 100644
--- a/dts/Bindings/soundwire/soundwire-controller.yaml
+++ b/dts/Bindings/soundwire/soundwire-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/soundwire/soundwire-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SoundWire Controller Generic Binding
+title: SoundWire Controller Common Properties
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
diff --git a/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml b/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml
index 0c10f76781..53eb6562b9 100644
--- a/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/dts/Bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -10,9 +10,6 @@ title: Amlogic Meson SPI Communication Controller
 maintainers:
   - Neil Armstrong <neil.armstrong@linaro.org>
 
-allOf:
-  - $ref: "spi-controller.yaml#"
-
 description: |
   The Meson SPICC is a generic SPI controller for general purpose Full-Duplex
   communications with dedicated 16 words RX/TX PIO FIFOs.
@@ -43,31 +40,53 @@ properties:
     minItems: 1
     maxItems: 2
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - amlogic,meson-g12a-spicc
-
-then:
-  properties:
-    clocks:
-      minItems: 2
-
-    clock-names:
-      items:
-        - const: core
-        - const: pclk
-
-else:
-  properties:
-    clocks:
-      maxItems: 1
-
-    clock-names:
-      items:
-        - const: core
+allOf:
+  - $ref: "spi-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-g12a-spicc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: core
+            - const: pclk
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-gx-spicc
+
+    then:
+      properties:
+        pinctrl-0: true
+        pinctrl-1: true
+        pinctrl-2: true
+
+        pinctrl-names:
+          minItems: 1
+          items:
+            - const: default
+            - const: idle-high
+            - const: idle-low
 
 required:
   - compatible
diff --git a/dts/Bindings/spi/aspeed,ast2600-fmc.yaml b/dts/Bindings/spi/aspeed,ast2600-fmc.yaml
index fa8f4ac209..e6c817de34 100644
--- a/dts/Bindings/spi/aspeed,ast2600-fmc.yaml
+++ b/dts/Bindings/spi/aspeed,ast2600-fmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Aspeed SMC controllers bindings
+title: Aspeed SMC controllers
 
 maintainers:
   - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
diff --git a/dts/Bindings/spi/fsl-imx-cspi.yaml b/dts/Bindings/spi/fsl-imx-cspi.yaml
index 50df1a40bb..12cb767110 100644
--- a/dts/Bindings/spi/fsl-imx-cspi.yaml
+++ b/dts/Bindings/spi/fsl-imx-cspi.yaml
@@ -23,6 +23,9 @@ properties:
       - const: fsl,imx51-ecspi
       - const: fsl,imx53-ecspi
       - items:
+          - const: fsl,imx8mp-ecspi
+          - const: fsl,imx6ul-ecspi
+      - items:
           - enum:
               - fsl,imx50-ecspi
               - fsl,imx6q-ecspi
@@ -34,7 +37,6 @@ properties:
               - fsl,imx8mq-ecspi
               - fsl,imx8mm-ecspi
               - fsl,imx8mn-ecspi
-              - fsl,imx8mp-ecspi
           - const: fsl,imx51-ecspi
 
   reg:
diff --git a/dts/Bindings/spi/ingenic,spi.yaml b/dts/Bindings/spi/ingenic,spi.yaml
index 360f76c226..c08d55b900 100644
--- a/dts/Bindings/spi/ingenic,spi.yaml
+++ b/dts/Bindings/spi/ingenic,spi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/ingenic,spi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs SPI controller devicetree bindings
+title: Ingenic SoCs SPI controller
 
 maintainers:
   - Artur Rojek <contact@artur-rojek.eu>
diff --git a/dts/Bindings/spi/marvell,mmp2-ssp.yaml b/dts/Bindings/spi/marvell,mmp2-ssp.yaml
index 0abcac385e..5f4f6b5615 100644
--- a/dts/Bindings/spi/marvell,mmp2-ssp.yaml
+++ b/dts/Bindings/spi/marvell,mmp2-ssp.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: PXA2xx SSP SPI Controller bindings
+title: PXA2xx SSP SPI Controller
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/dts/Bindings/spi/nuvoton,npcm-fiu.txt b/dts/Bindings/spi/nuvoton,npcm-fiu.txt
index c63ce4cc0a..fb38e96d39 100644
--- a/dts/Bindings/spi/nuvoton,npcm-fiu.txt
+++ b/dts/Bindings/spi/nuvoton,npcm-fiu.txt
@@ -51,7 +51,7 @@ fiu3: spi@c00000000 {
 	clocks = <&clk NPCM7XX_CLK_AHB>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi3_pins>;
-	spi-nor@0 {
+	flash@0 {
 			...
 	};
 };
diff --git a/dts/Bindings/spi/nuvoton,wpcm450-fiu.yaml b/dts/Bindings/spi/nuvoton,wpcm450-fiu.yaml
new file mode 100644
index 0000000000..4e0d391e1d
--- /dev/null
+++ b/dts/Bindings/spi/nuvoton,wpcm450-fiu.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nuvoton,wpcm450-fiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 Flash Interface Unit (FIU)
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,wpcm450-fiu
+
+  reg:
+    items:
+      - description: FIU registers
+      - description: Memory-mapped flash contents
+
+  reg-names:
+    items:
+      - const: control
+      - const: memory
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,shm:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the SHM block (see ../arm/nuvoton,shm.yaml)
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@c8000000 {
+      compatible = "nuvoton,wpcm450-fiu";
+      reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg-names = "control", "memory";
+      clocks = <&clk 0>;
+      nuvoton,shm = <&shm>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+      };
+    };
+
+    shm: syscon@c8001000 {
+      compatible = "nuvoton,wpcm450-shm", "syscon";
+      reg = <0xc8001000 0x1000>;
+    };
diff --git a/dts/Bindings/spi/nvidia,tegra210-quad.yaml b/dts/Bindings/spi/nvidia,tegra210-quad.yaml
index 6b733e5c11..899100e783 100644
--- a/dts/Bindings/spi/nvidia,tegra210-quad.yaml
+++ b/dts/Bindings/spi/nvidia,tegra210-quad.yaml
@@ -48,7 +48,7 @@ properties:
       - const: tx
 
 patternProperties:
-  "@[0-9a-f]+":
+  "@[0-9a-f]+$":
     type: object
 
     properties:
diff --git a/dts/Bindings/spi/omap-spi.yaml b/dts/Bindings/spi/omap-spi.yaml
index 9952199cae..352affa4b7 100644
--- a/dts/Bindings/spi/omap-spi.yaml
+++ b/dts/Bindings/spi/omap-spi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/omap-spi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SPI controller bindings for OMAP and K3 SoCs
+title: SPI Controller on OMAP and K3 SoCs
 
 maintainers:
   - Aswath Govindraju <a-govindraju@ti.com>
diff --git a/dts/Bindings/spi/socionext,f-ospi.yaml b/dts/Bindings/spi/socionext,f-ospi.yaml
new file mode 100644
index 0000000000..9878d14465
--- /dev/null
+++ b/dts/Bindings/spi/socionext,f-ospi.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,f-ospi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext F_OSPI controller
+
+description: |
+  The Socionext F_OSPI is a controller used to interface with flash
+  memories using the SPI communication interface.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,f-ospi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  num-cs:
+    minimum: 1
+    maximum: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ospi0: spi@80000000 {
+        compatible = "socionext,f-ospi";
+        reg = <0x80000000 0x1000>;
+        clocks = <&clks 0>;
+        num-cs = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spansion,s25fl128s", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <50000000>;
+        };
+    };
diff --git a/dts/Bindings/spi/socionext,synquacer-spi.yaml b/dts/Bindings/spi/socionext,synquacer-spi.yaml
new file mode 100644
index 0000000000..45cbe744c7
--- /dev/null
+++ b/dts/Bindings/spi/socionext,synquacer-spi.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,synquacer-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer HS-SPI Controller
+
+maintainers:
+  - Masahisa Kojima <masahisa.kojima@linaro.org>
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: core clock
+      - description: rate clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: iHCLK
+      - const: iPCLK
+
+  interrupts:
+    items:
+      - description: Receive Interrupt
+      - description: Transmit Interrupt
+      - description: Fault Interrupt
+
+  socionext,use-rtm:
+    type: boolean
+    description: Enable using "retimed clock" for RX
+
+  socionext,set-aces:
+    type: boolean
+    description: Enable same active clock edges field to be set
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@ff110000 {
+        compatible = "socionext,synquacer-spi";
+        reg = <0xff110000 0x1000>;
+        interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+               <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+               <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_hsspi>;
+        clock-names = "iHCLK";
+        socionext,use-rtm;
+        socionext,set-aces;
+    };
+...
diff --git a/dts/Bindings/spi/spi-controller.yaml b/dts/Bindings/spi/spi-controller.yaml
index 01042a7f38..5a7c72cadf 100644
--- a/dts/Bindings/spi/spi-controller.yaml
+++ b/dts/Bindings/spi/spi-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/spi-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SPI Controller Generic Binding
+title: SPI Controller Common Properties
 
 maintainers:
   - Mark Brown <broonie@kernel.org>
diff --git a/dts/Bindings/spi/spi-fsl-lpspi.yaml b/dts/Bindings/spi/spi-fsl-lpspi.yaml
index 8b44284d30..94caa2b7e2 100644
--- a/dts/Bindings/spi/spi-fsl-lpspi.yaml
+++ b/dts/Bindings/spi/spi-fsl-lpspi.yaml
@@ -56,6 +56,13 @@ properties:
       this property to re-config the chipselect value in the LPSPI driver.
     type: boolean
 
+  num-cs:
+    description:
+      number of chip selects.
+    minimum: 1
+    maximum: 2
+    default: 1
+
 required:
   - compatible
   - reg
@@ -80,4 +87,5 @@ examples:
         clock-names = "per", "ipg";
         spi-slave;
         fsl,spi-only-use-cs1-sel;
+        num-cs = <2>;
     };
diff --git a/dts/Bindings/spi/spi-gpio.yaml b/dts/Bindings/spi/spi-gpio.yaml
index 0d0b6d9dad..f29b89076c 100644
--- a/dts/Bindings/spi/spi-gpio.yaml
+++ b/dts/Bindings/spi/spi-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SPI-GPIO devicetree bindings
+title: SPI-GPIO
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/dts/Bindings/spi/spi-peripheral-props.yaml b/dts/Bindings/spi/spi-peripheral-props.yaml
index dca677f9e1..ead2cccf65 100644
--- a/dts/Bindings/spi/spi-peripheral-props.yaml
+++ b/dts/Bindings/spi/spi-peripheral-props.yaml
@@ -44,6 +44,11 @@ properties:
     description:
       Maximum SPI clocking speed of the device in Hz.
 
+  spi-cs-setup-ns:
+    description:
+      Delay in nanosecods to be introduced by the controller after CS is
+      asserted.
+
   spi-rx-bus-width:
     description:
       Bus width to the SPI bus used for read transfers.
diff --git a/dts/Bindings/spi/spi-synquacer.txt b/dts/Bindings/spi/spi-synquacer.txt
deleted file mode 100644
index 291dfa692d..0000000000
--- a/dts/Bindings/spi/spi-synquacer.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Socionext Synquacer HS-SPI bindings
-
-Required Properties:
-- compatible: should be "socionext,synquacer-spi"
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts.
-- clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK)
-- clock-names: Shall be "iHCLK" and "iPCLK" respectively
-
-Optional Properties:
-- socionext,use-rtm: boolean, if required to use "retimed clock" for RX
-- socionext,set-aces: boolean, if same active clock edges field to be set.
-
-Example:
-
-	spi0: spi@ff110000 {
-		compatible = "socionext,synquacer-spi";
-		reg = <0xff110000 0x1000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk_hsspi>;
-		clock-names = "iHCLK";
-		socionext,use-rtm;
-		socionext,set-aces;
-	};
diff --git a/dts/Bindings/spi/spi-zynqmp-qspi.yaml b/dts/Bindings/spi/spi-zynqmp-qspi.yaml
index 6bf0edc57f..546c416cdb 100644
--- a/dts/Bindings/spi/spi-zynqmp-qspi.yaml
+++ b/dts/Bindings/spi/spi-zynqmp-qspi.yaml
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,zynqmp-qspi-1.0
+    enum:
+      - xlnx,versal-qspi-1.0
+      - xlnx,zynqmp-qspi-1.0
 
   reg:
     maxItems: 2
diff --git a/dts/Bindings/spi/st,stm32-qspi.yaml b/dts/Bindings/spi/st,stm32-qspi.yaml
index 6ec6f55618..1eb17f7a4d 100644
--- a/dts/Bindings/spi/st,stm32-qspi.yaml
+++ b/dts/Bindings/spi/st,stm32-qspi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/st,stm32-qspi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
+title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI)
 
 maintainers:
   - Christophe Kerello <christophe.kerello@foss.st.com>
diff --git a/dts/Bindings/spi/st,stm32-spi.yaml b/dts/Bindings/spi/st,stm32-spi.yaml
index 3d64bed266..1cda15f91c 100644
--- a/dts/Bindings/spi/st,stm32-spi.yaml
+++ b/dts/Bindings/spi/st,stm32-spi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 SPI Controller bindings
+title: STMicroelectronics STM32 SPI Controller
 
 description: |
   The STM32 SPI controller is used to communicate with external devices using
diff --git a/dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml b/dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml
index fee4f0eb46..f983b4af6d 100644
--- a/dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml
+++ b/dts/Bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -85,6 +85,14 @@ properties:
     description: >
       which of the PMIC Arb provided channels to use for accesses
 
+  qcom,bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    description: >
+      SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond.
+      Supported values, 0 = primary bus, 1 = secondary bus
+
 required:
   - compatible
   - reg-names
@@ -113,5 +121,7 @@ examples:
 
         interrupt-controller;
         #interrupt-cells = <4>;
+
+        qcom,bus-id = <0>;
     };
 
diff --git a/dts/Bindings/sram/qcom,imem.yaml b/dts/Bindings/sram/qcom,imem.yaml
index e919919019..665c06e14f 100644
--- a/dts/Bindings/sram/qcom,imem.yaml
+++ b/dts/Bindings/sram/qcom,imem.yaml
@@ -25,6 +25,7 @@ properties:
           - qcom,sdm630-imem
           - qcom,sdm845-imem
           - qcom,sdx55-imem
+          - qcom,sdx65-imem
       - const: syscon
       - const: simple-mfd
 
diff --git a/dts/Bindings/thermal/fsl,scu-thermal.yaml b/dts/Bindings/thermal/fsl,scu-thermal.yaml
index f9e4b3c8d0..3721c8c8ec 100644
--- a/dts/Bindings/thermal/fsl,scu-thermal.yaml
+++ b/dts/Bindings/thermal/fsl,scu-thermal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - Thermal bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - Thermal Based on SCU Message Protocol
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/thermal/generic-adc-thermal.yaml b/dts/Bindings/thermal/generic-adc-thermal.yaml
new file mode 100644
index 0000000000..f1fc3b0d86
--- /dev/null
+++ b/dts/Bindings/thermal/generic-adc-thermal.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/generic-adc-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: General Purpose Analog To Digital Converter (ADC) based thermal sensor
+
+maintainers:
+  - Laxman Dewangan <ldewangan@nvidia.com>
+
+description:
+  On some of platforms, thermal sensor like thermistors are connected to
+  one of ADC channel and sensor resistance is read via voltage across the
+  sensor resistor. The voltage read across the sensor is mapped to
+  temperature using voltage-temperature lookup table.
+
+properties:
+  compatible:
+    const: generic-adc-thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: sensor-channel
+
+  temperature-lookup-table:
+    description: |
+      Lookup table to map the relation between ADC value and temperature.
+      When ADC is read, the value is looked up on the table to get the
+      equivalent temperature.
+
+      If not specified, driver assumes the ADC channel gives milliCelsius
+      directly.
+    $ref: /schemas/types.yaml#/definitions/int32-matrix
+    items:
+      items:
+        - description: Temperature in milliCelsius
+        - description: ADC read value
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/thermal/thermal.h>
+
+    thermal-sensor {
+        compatible = "generic-adc-thermal";
+        #thermal-sensor-cells = <0>;
+        io-channels = <&ads1015 1>;
+        io-channel-names = "sensor-channel";
+        temperature-lookup-table = <
+              (-40000) 2578
+              (-39000) 2577
+              (-38000) 2576
+              (-37000) 2575
+              (-36000) 2574
+              (-35000) 2573
+              (-34000) 2572
+              (-33000) 2571
+              (-32000) 2569
+              (-31000) 2568
+              (-30000) 2567
+              /* skip */
+              118000 254
+              119000 247
+              120000 240
+              121000 233
+              122000 226
+              123000 220
+              124000 214
+              125000 208>;
+    };
+...
diff --git a/dts/Bindings/thermal/imx-thermal.yaml b/dts/Bindings/thermal/imx-thermal.yaml
index 16b57f57d1..b22c8b59d5 100644
--- a/dts/Bindings/thermal/imx-thermal.yaml
+++ b/dts/Bindings/thermal/imx-thermal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/imx-thermal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX Thermal Binding
+title: NXP i.MX Thermal
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
diff --git a/dts/Bindings/thermal/imx8mm-thermal.yaml b/dts/Bindings/thermal/imx8mm-thermal.yaml
index 89c54e08ee..d2c1e4573c 100644
--- a/dts/Bindings/thermal/imx8mm-thermal.yaml
+++ b/dts/Bindings/thermal/imx8mm-thermal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/imx8mm-thermal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8M Mini Thermal Binding
+title: NXP i.MX8M Mini Thermal
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
@@ -32,6 +32,13 @@ properties:
   clocks:
     maxItems: 1
 
+  nvmem-cells:
+    maxItems: 1
+    description: Phandle to the calibration data provided by ocotp
+
+  nvmem-cell-names:
+    const: calib
+
   "#thermal-sensor-cells":
     description: |
       Number of cells required to uniquely identify the thermal
diff --git a/dts/Bindings/thermal/mediatek-thermal.txt b/dts/Bindings/thermal/mediatek-thermal.txt
index 5c7e7bdd02..38b32bb447 100644
--- a/dts/Bindings/thermal/mediatek-thermal.txt
+++ b/dts/Bindings/thermal/mediatek-thermal.txt
@@ -13,6 +13,8 @@ Required properties:
   - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
   - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
   - "mediatek,mt7622-thermal" : For MT7622 SoC
+  - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
+  - "mediatek,mt7986-thermal" : For MT7986 SoC
   - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
   - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
 - reg: Address range of the thermal controller
diff --git a/dts/Bindings/thermal/qcom-lmh.yaml b/dts/Bindings/thermal/qcom-lmh.yaml
index e1587ddf7d..92762efc21 100644
--- a/dts/Bindings/thermal/qcom-lmh.yaml
+++ b/dts/Bindings/thermal/qcom-lmh.yaml
@@ -37,7 +37,7 @@ properties:
   cpus:
     description:
       phandle of the first cpu in the LMh cluster
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
 
   qcom,lmh-temp-arm-millicelsius:
     description:
diff --git a/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml b/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml
index feb390d506..d20569b9b7 100644
--- a/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -222,8 +222,8 @@ examples:
                 qcom,hw-settle-time = <200>;
             };
 
-            conn-therm@47 {
-                reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
+            conn-therm@147 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
                 qcom,ratiometric;
                 qcom,hw-settle-time = <200>;
             };
@@ -247,7 +247,7 @@ examples:
 
             conn-therm@1 {
                 reg = <1>;
-                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>;
+                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
                 qcom,avg-samples = <2>;
                 qcom,ratiometric;
                 qcom,hw-settle-time-us = <200>;
diff --git a/dts/Bindings/thermal/qcom-tsens.yaml b/dts/Bindings/thermal/qcom-tsens.yaml
index 038d81338f..0231f187b0 100644
--- a/dts/Bindings/thermal/qcom-tsens.yaml
+++ b/dts/Bindings/thermal/qcom-tsens.yaml
@@ -53,12 +53,19 @@ properties:
               - qcom,sc8280xp-tsens
               - qcom,sdm630-tsens
               - qcom,sdm845-tsens
+              - qcom,sm6115-tsens
               - qcom,sm6350-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
               - qcom,sm8350-tsens
+              - qcom,sm8450-tsens
+              - qcom,sm8550-tsens
           - const: qcom,tsens-v2
 
+      - description: v2 of TSENS with combined interrupt
+        enum:
+          - qcom,ipq8074-tsens
+
   reg:
     items:
       - description: TM registers
@@ -66,15 +73,11 @@ properties:
 
   interrupts:
     minItems: 1
-    items:
-      - description: Combined interrupt if upper or lower threshold crossed
-      - description: Interrupt if critical threshold crossed
+    maxItems: 2
 
   interrupt-names:
     minItems: 1
-    items:
-      - const: uplow
-      - const: critical
+    maxItems: 2
 
   nvmem-cells:
     minItems: 1
@@ -128,22 +131,64 @@ allOf:
     then:
       properties:
         interrupts:
-          maxItems: 1
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
         interrupt-names:
-          maxItems: 1
+          items:
+            - const: uplow
 
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-tsens
+              - qcom,msm8996-tsens
+              - qcom,msm8998-tsens
+              - qcom,sc7180-tsens
+              - qcom,sc7280-tsens
+              - qcom,sc8180x-tsens
+              - qcom,sc8280xp-tsens
+              - qcom,sdm630-tsens
+              - qcom,sdm845-tsens
+              - qcom,sm6350-tsens
+              - qcom,sm8150-tsens
+              - qcom,sm8250-tsens
+              - qcom,sm8350-tsens
+              - qcom,sm8450-tsens
+              - qcom,tsens-v2
+    then:
       properties:
         interrupts:
-          minItems: 2
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
+            - description: Interrupt if critical threshold crossed
         interrupt-names:
-          minItems: 2
+          items:
+            - const: uplow
+            - const: critical
 
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8074-tsens
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Combined interrupt if upper, lower or critical thresholds crossed
+        interrupt-names:
+          items:
+            - const: combined
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-tsens
               - qcom,tsens-v0_1
               - qcom,tsens-v1
               - qcom,tsens-v2
@@ -226,4 +271,19 @@ examples:
            #qcom,sensors = <13>;
            #thermal-sensor-cells = <1>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 4 (for any IPQ8074 based SoC-s):
+    tsens4: thermal-sensor@4a9000 {
+           compatible = "qcom,ipq8074-tsens";
+           reg = <0x4a9000 0x1000>,
+                 <0x4a8000 0x1000>;
+
+           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "combined";
+
+           #qcom,sensors = <16>;
+           #thermal-sensor-cells = <1>;
+    };
 ...
diff --git a/dts/Bindings/thermal/rzg2l-thermal.yaml b/dts/Bindings/thermal/rzg2l-thermal.yaml
index 1d83733978..03f4b926e5 100644
--- a/dts/Bindings/thermal/rzg2l-thermal.yaml
+++ b/dts/Bindings/thermal/rzg2l-thermal.yaml
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-tsu # RZ/G2UL
+          - renesas,r9a07g043-tsu # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-tsu # RZ/G2{L,LC}
           - renesas,r9a07g054-tsu # RZ/V2L
       - const: renesas,rzg2l-tsu
diff --git a/dts/Bindings/thermal/sprd-thermal.yaml b/dts/Bindings/thermal/sprd-thermal.yaml
index 6d65a3cf2a..76aaa004c8 100644
--- a/dts/Bindings/thermal/sprd-thermal.yaml
+++ b/dts/Bindings/thermal/sprd-thermal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/sprd-thermal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum thermal sensor controller bindings
+title: Spreadtrum thermal sensor controller
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/dts/Bindings/thermal/st,stm32-thermal.yaml b/dts/Bindings/thermal/st,stm32-thermal.yaml
index bee41cff51..ab043084f6 100644
--- a/dts/Bindings/thermal/st,stm32-thermal.yaml
+++ b/dts/Bindings/thermal/st,stm32-thermal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/st,stm32-thermal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 digital thermal sensor (DTS) binding
+title: STMicroelectronics STM32 digital thermal sensor (DTS)
 
 maintainers:
   - Pascal Paillet <p.paillet@foss.st.com>
diff --git a/dts/Bindings/thermal/thermal-cooling-devices.yaml b/dts/Bindings/thermal/thermal-cooling-devices.yaml
index 850a9841b1..b9022f1613 100644
--- a/dts/Bindings/thermal/thermal-cooling-devices.yaml
+++ b/dts/Bindings/thermal/thermal-cooling-devices.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/thermal/thermal-cooling-devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Thermal cooling device binding
+title: Thermal cooling device
 
 maintainers:
   - Amit Kucheria <amitk@kernel.org>
@@ -76,9 +76,13 @@ examples:
                     next-level-cache = <&L2_0>;
                     L2_0: l2-cache {
                             compatible = "cache";
+                            cache-unified;
+                            cache-level = <2>;
                             next-level-cache = <&L3_0>;
                             L3_0: l3-cache {
                                     compatible = "cache";
+                                    cache-unified;
+                                    cache-level = <3>;
                             };
                     };
           };
diff --git a/dts/Bindings/thermal/thermal-generic-adc.txt b/dts/Bindings/thermal/thermal-generic-adc.txt
deleted file mode 100644
index e136946a2f..0000000000
--- a/dts/Bindings/thermal/thermal-generic-adc.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-General Purpose Analog To Digital Converter (ADC) based thermal sensor.
-
-On some of platforms, thermal sensor like thermistors are connected to
-one of ADC channel and sensor resistance is read via voltage across the
-sensor resistor. The voltage read across the sensor is mapped to
-temperature using voltage-temperature lookup table.
-
-Required properties:
-===================
-- compatible:		     Must be "generic-adc-thermal".
-- #thermal-sensor-cells:     Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description
-		             of this property.
-Optional properties:
-===================
-- temperature-lookup-table:  Two dimensional array of Integer; lookup table
-			     to map the relation between ADC value and
-			     temperature. When ADC is read, the value is
-			     looked up on the table to get the equivalent
-			     temperature.
-
-			     The first value of the each row of array is the
-			     temperature in milliCelsius and second value of
-			     the each row of array is the ADC read value.
-
-			     If not specified, driver assumes the ADC channel
-			     gives milliCelsius directly.
-
-Example :
-#include <dt-bindings/thermal/thermal.h>
-
-i2c@7000c400 {
-	ads1015: ads1015@4a {
-		reg = <0x4a>;
-		compatible = "ads1015";
-		sampling-frequency = <3300>;
-		#io-channel-cells = <1>;
-	};
-};
-
-tboard_thermistor: thermal-sensor {
-	compatible = "generic-adc-thermal";
-	#thermal-sensor-cells = <0>;
-	io-channels = <&ads1015 1>;
-	io-channel-names = "sensor-channel";
-	temperature-lookup-table = <    (-40000) 2578
-					(-39000) 2577
-					(-38000) 2576
-					(-37000) 2575
-					(-36000) 2574
-					(-35000) 2573
-					(-34000) 2572
-					(-33000) 2571
-					(-32000) 2569
-					(-31000) 2568
-					(-30000) 2567
-					::::::::::
-					118000 254
-					119000 247
-					120000 240
-					121000 233
-					122000 226
-					123000 220
-					124000 214
-					125000 208>;
-};
-
-dummy_cool_dev: dummy-cool-dev {
-	compatible = "dummy-cooling-dev";
-	#cooling-cells = <2>; /* min followed by max */
-};
-
-thermal-zones {
-	Tboard {
-		polling-delay = <15000>; /* milliseconds */
-		polling-delay-passive = <0>; /* milliseconds */
-		thermal-sensors = <&tboard_thermistor>;
-
-		trips {
-			therm_est_trip: therm_est_trip {
-				temperature = <40000>;
-				type = "active";
-				hysteresis = <1000>;
-			};
-		};
-
-		cooling-maps {
-			map0 {
-				trip = <&therm_est_trip>;
-				cooling-device = <&dummy_cool_dev THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				contribution = <100>;
-			};
-
-		};
-	};
-};
diff --git a/dts/Bindings/thermal/thermal-idle.yaml b/dts/Bindings/thermal/thermal-idle.yaml
index cc938d7ad1..1b77d542a7 100644
--- a/dts/Bindings/thermal/thermal-idle.yaml
+++ b/dts/Bindings/thermal/thermal-idle.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/thermal/thermal-idle.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Thermal idle cooling device binding
+title: Thermal idle cooling device
 
 maintainers:
   - Daniel Lezcano <daniel.lezcano@linaro.org>
@@ -48,99 +48,105 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/thermal/thermal.h>
+    /{
+        #include <dt-bindings/thermal/thermal.h>
 
-    // Example: Combining idle cooling device on big CPUs with cpufreq cooling device
-    cpus {
+        compatible = "foo";
+        model = "foo";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // Example: Combining idle cooling device on big CPUs with cpufreq cooling device
+        cpus {
             #address-cells = <2>;
             #size-cells = <0>;
 
             /* ... */
 
-                 cpu_b0: cpu@100 {
-                         device_type = "cpu";
-                         compatible = "arm,cortex-a72";
-                         reg = <0x0 0x100>;
-                         enable-method = "psci";
-                         capacity-dmips-mhz = <1024>;
-                         dynamic-power-coefficient = <436>;
-                         #cooling-cells = <2>; /* min followed by max */
-                         cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
-                         thermal-idle {
-                                 #cooling-cells = <2>;
-                                 duration-us = <10000>;
-                                 exit-latency-us = <500>;
-                         };
+            cpu_b0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a72";
+                reg = <0x0 0x100>;
+                enable-method = "psci";
+                capacity-dmips-mhz = <1024>;
+                dynamic-power-coefficient = <436>;
+                #cooling-cells = <2>; /* min followed by max */
+                cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
+                cpu_b0_therm: thermal-idle {
+                    #cooling-cells = <2>;
+                    duration-us = <10000>;
+                    exit-latency-us = <500>;
+                };
+            };
+
+            cpu_b1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a72";
+                reg = <0x0 0x101>;
+                enable-method = "psci";
+                capacity-dmips-mhz = <1024>;
+                dynamic-power-coefficient = <436>;
+                #cooling-cells = <2>; /* min followed by max */
+                cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
+                cpu_b1_therm: thermal-idle {
+                    #cooling-cells = <2>;
+                    duration-us = <10000>;
+                    exit-latency-us = <500>;
                 };
+            };
 
-                cpu_b1: cpu@101 {
-                        device_type = "cpu";
-                        compatible = "arm,cortex-a72";
-                        reg = <0x0 0x101>;
-                        enable-method = "psci";
-                        capacity-dmips-mhz = <1024>;
-                        dynamic-power-coefficient = <436>;
-                        #cooling-cells = <2>; /* min followed by max */
-                        cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
-                        thermal-idle {
-                                #cooling-cells = <2>;
-                                duration-us = <10000>;
-                                exit-latency-us = <500>;
-                        };
-                 };
-
-          /* ... */
+            /* ... */
 
-    };
+        };
 
-    /* ... */
+        /* ... */
 
-    thermal_zones {
-         cpu_thermal: cpu {
+        thermal_zones {
+            cpu_thermal: cpu {
                 polling-delay-passive = <100>;
                 polling-delay = <1000>;
 
                 /* ... */
 
                 trips {
-                        cpu_alert0: cpu_alert0 {
-                                    temperature = <65000>;
-                                    hysteresis = <2000>;
-                                    type = "passive";
-                        };
-
-                        cpu_alert1: cpu_alert1 {
-                                    temperature = <70000>;
-                                    hysteresis = <2000>;
-                                    type = "passive";
-                        };
-
-                        cpu_alert2: cpu_alert2 {
-                                    temperature = <75000>;
-                                    hysteresis = <2000>;
-                                    type = "passive";
-                        };
-
-                        cpu_crit: cpu_crit {
-                                    temperature = <95000>;
-                                    hysteresis = <2000>;
-                                    type = "critical";
-                        };
+                    cpu_alert0: cpu_alert0 {
+                        temperature = <65000>;
+                        hysteresis = <2000>;
+                        type = "passive";
+                    };
+
+                    cpu_alert1: cpu_alert1 {
+                        temperature = <70000>;
+                        hysteresis = <2000>;
+                        type = "passive";
+                    };
+
+                    cpu_alert2: cpu_alert2 {
+                        temperature = <75000>;
+                        hysteresis = <2000>;
+                        type = "passive";
+                    };
+
+                    cpu_crit: cpu_crit {
+                        temperature = <95000>;
+                        hysteresis = <2000>;
+                        type = "critical";
+                    };
                 };
 
                 cooling-maps {
-                        map0 {
-                             trip = <&cpu_alert1>;
-                             cooling-device = <&{/cpus/cpu@100/thermal-idle} 0 15 >,
-                                              <&{/cpus/cpu@101/thermal-idle} 0 15>;
-                        };
-
-                        map1 {
-                             trip = <&cpu_alert2>;
-                             cooling-device =
-                                        <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-                                        <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-                       };
+                    map0 {
+                        trip = <&cpu_alert1>;
+                        cooling-device = <&cpu_b0_therm 0 15 >,
+                                         <&cpu_b1_therm 0 15>;
+                    };
+
+                    map1 {
+                        trip = <&cpu_alert2>;
+                        cooling-device = <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                         <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                    };
                 };
-          };
+            };
+        };
     };
diff --git a/dts/Bindings/thermal/thermal-sensor.yaml b/dts/Bindings/thermal/thermal-sensor.yaml
index 4bd345c71e..57565b3fb0 100644
--- a/dts/Bindings/thermal/thermal-sensor.yaml
+++ b/dts/Bindings/thermal/thermal-sensor.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Thermal sensor binding
+title: Thermal sensor
 
 maintainers:
   - Amit Kucheria <amitk@kernel.org>
diff --git a/dts/Bindings/thermal/thermal-zones.yaml b/dts/Bindings/thermal/thermal-zones.yaml
index 8d2c6d74b6..8581821fa4 100644
--- a/dts/Bindings/thermal/thermal-zones.yaml
+++ b/dts/Bindings/thermal/thermal-zones.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
 $schema: http://devicetree.org/meta-schemas/base.yaml#
 
-title: Thermal zone binding
+title: Thermal zone
 
 maintainers:
   - Amit Kucheria <amitk@kernel.org>
diff --git a/dts/Bindings/thermal/ti,am654-thermal.yaml b/dts/Bindings/thermal/ti,am654-thermal.yaml
index ea14de80ec..7ed0abe929 100644
--- a/dts/Bindings/thermal/ti,am654-thermal.yaml
+++ b/dts/Bindings/thermal/ti,am654-thermal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments AM654 VTM (DTS) binding
+title: Texas Instruments AM654 VTM (DTS)
 
 maintainers:
   - Keerthy <j-keerthy@ti.com>
diff --git a/dts/Bindings/thermal/ti,j72xx-thermal.yaml b/dts/Bindings/thermal/ti,j72xx-thermal.yaml
index c74f124ebf..171b3622ed 100644
--- a/dts/Bindings/thermal/ti,j72xx-thermal.yaml
+++ b/dts/Bindings/thermal/ti,j72xx-thermal.yaml
@@ -4,11 +4,24 @@
 $id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments J72XX VTM (DTS) binding
+title: Texas Instruments J72XX VTM (DTS)
 
 maintainers:
   - Keerthy <j-keerthy@ti.com>
 
+description: |
+  The TI K3 family of SoCs typically have a Voltage & Thermal
+  Management (VTM) device to control up to 8 temperature diode
+  sensors to measure silicon junction temperatures from different
+  hotspots of the chip as well as provide temperature, interrupt
+  and alerting information.
+
+  The following polynomial equation can then be used to convert
+  value returned by this device into a temperature in Celsius
+
+  Temp(C) = (-9.2627e-12) * x^4 + (6.0373e-08) * x^3 + \
+            (-1.7058e-04) * x^2 + (3.2512e-01) * x   + (-4.9003e+01)
+
 properties:
   compatible:
     enum:
@@ -19,7 +32,12 @@ properties:
     items:
       - description: VTM cfg1 register space
       - description: VTM cfg2 register space
-      - description: VTM efuse register space
+      - description: |
+          A software trimming method must be applied to some Jacinto
+          devices to function properly. This eFuse region provides
+          the information needed for these SoCs to report
+          temperatures accurately.
+    minItems: 2
 
   power-domains:
     maxItems: 1
@@ -27,6 +45,21 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-vtm
+    then:
+      properties:
+        reg:
+          minItems: 3
+    else:
+      properties:
+        reg:
+          maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/timer/brcm,bcmbca-timer.yaml b/dts/Bindings/timer/brcm,bcmbca-timer.yaml
new file mode 100644
index 0000000000..6707d97608
--- /dev/null
+++ b/dts/Bindings/timer/brcm,bcmbca-timer.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,bcmbca-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC timer
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm6345-timer
+        description: >
+          An old block with 3 timers.
+
+          It can be found in BCM6345, BCM6838 and BCM63268.
+      - const: brcm,bcm63138-timer
+        description: >
+          Updated block with 4 timers and control regs at the beginning.
+
+          It can be found in newer SoCs, e.g. BCM63138, BCM63148, BCM63381,
+          BCM68360, BCM6848, BCM6858, BCM4908.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    timer@fffe0200 {
+      compatible = "brcm,bcm6345-timer";
+      reg = <0xfffe0200 0x1c>;
+    };
diff --git a/dts/Bindings/timer/fsl,imxgpt.yaml b/dts/Bindings/timer/fsl,imxgpt.yaml
index a4f51f46b7..716c6afcca 100644
--- a/dts/Bindings/timer/fsl,imxgpt.yaml
+++ b/dts/Bindings/timer/fsl,imxgpt.yaml
@@ -31,6 +31,8 @@ properties:
           - enum:
               - fsl,imx6sl-gpt
               - fsl,imx6sx-gpt
+              - fsl,imxrt1050-gpt
+              - fsl,imxrt1170-gpt
           - const: fsl,imx6dl-gpt
 
   reg:
diff --git a/dts/Bindings/timer/ingenic,sysost.yaml b/dts/Bindings/timer/ingenic,sysost.yaml
index 98648bf9e1..bdc82d8bce 100644
--- a/dts/Bindings/timer/ingenic,sysost.yaml
+++ b/dts/Bindings/timer/ingenic,sysost.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/ingenic,sysost.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for SYSOST in Ingenic XBurst family SoCs
+title: SYSOST in Ingenic XBurst family SoCs
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
diff --git a/dts/Bindings/timer/ingenic,tcu.yaml b/dts/Bindings/timer/ingenic,tcu.yaml
index a84fef0fe6..2d14610888 100644
--- a/dts/Bindings/timer/ingenic,tcu.yaml
+++ b/dts/Bindings/timer/ingenic,tcu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs Timer/Counter Unit (TCU) devicetree bindings
+title: Ingenic SoCs Timer/Counter Unit (TCU)
 
 description: |
   For a description of the TCU hardware and drivers, have a look at
diff --git a/dts/Bindings/timer/mrvl,mmp-timer.yaml b/dts/Bindings/timer/mrvl,mmp-timer.yaml
index 1fbc260a0c..1ee4aab695 100644
--- a/dts/Bindings/timer/mrvl,mmp-timer.yaml
+++ b/dts/Bindings/timer/mrvl,mmp-timer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/mrvl,mmp-timer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP Timer bindings
+title: Marvell MMP Timer
 
 maintainers:
   - Daniel Lezcano <daniel.lezcano@linaro.org>
diff --git a/dts/Bindings/timer/nuvoton,npcm7xx-timer.yaml b/dts/Bindings/timer/nuvoton,npcm7xx-timer.yaml
index 737af78ad7..d53e1bb98b 100644
--- a/dts/Bindings/timer/nuvoton,npcm7xx-timer.yaml
+++ b/dts/Bindings/timer/nuvoton,npcm7xx-timer.yaml
@@ -25,7 +25,13 @@ properties:
       - description: The timer interrupt of timer 0
 
   clocks:
-    maxItems: 1
+    items:
+      - description: The reference clock for timer 0
+      - description: The reference clock for timer 1
+      - description: The reference clock for timer 2
+      - description: The reference clock for timer 3
+      - description: The reference clock for timer 4
+    minItems: 1
 
 required:
   - compatible
diff --git a/dts/Bindings/timer/renesas,cmt.yaml b/dts/Bindings/timer/renesas,cmt.yaml
index bde6c9b66b..a0be1755ea 100644
--- a/dts/Bindings/timer/renesas,cmt.yaml
+++ b/dts/Bindings/timer/renesas,cmt.yaml
@@ -102,12 +102,14 @@ properties:
           - enum:
               - renesas,r8a779a0-cmt0     # 32-bit CMT0 on R-Car V3U
               - renesas,r8a779f0-cmt0     # 32-bit CMT0 on R-Car S4-8
+              - renesas,r8a779g0-cmt0     # 32-bit CMT0 on R-Car V4H
           - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
 
       - items:
           - enum:
               - renesas,r8a779a0-cmt1     # 48-bit CMT on R-Car V3U
               - renesas,r8a779f0-cmt1     # 48-bit CMT on R-Car S4-8
+              - renesas,r8a779g0-cmt1     # 48-bit CMT on R-Car V4H
           - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
 
   reg:
diff --git a/dts/Bindings/timer/renesas,tmu.yaml b/dts/Bindings/timer/renesas,tmu.yaml
index 60f4c059bc..a67e427a9e 100644
--- a/dts/Bindings/timer/renesas,tmu.yaml
+++ b/dts/Bindings/timer/renesas,tmu.yaml
@@ -38,6 +38,7 @@ properties:
           - renesas,tmu-r8a77995 # R-Car D3
           - renesas,tmu-r8a779a0 # R-Car V3U
           - renesas,tmu-r8a779f0 # R-Car S4-8
+          - renesas,tmu-r8a779g0 # R-Car V4H
       - const: renesas,tmu
 
   reg:
diff --git a/dts/Bindings/timer/rockchip,rk-timer.yaml b/dts/Bindings/timer/rockchip,rk-timer.yaml
index dc3bc1e62f..b61ed1a431 100644
--- a/dts/Bindings/timer/rockchip,rk-timer.yaml
+++ b/dts/Bindings/timer/rockchip,rk-timer.yaml
@@ -18,6 +18,7 @@ properties:
           - enum:
               - rockchip,rv1108-timer
               - rockchip,rk3036-timer
+              - rockchip,rk3128-timer
               - rockchip,rk3188-timer
               - rockchip,rk3228-timer
               - rockchip,rk3229-timer
diff --git a/dts/Bindings/timer/st,stm32-timer.yaml b/dts/Bindings/timer/st,stm32-timer.yaml
index 937aa8a563..9ec1153762 100644
--- a/dts/Bindings/timer/st,stm32-timer.yaml
+++ b/dts/Bindings/timer/st,stm32-timer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/st,stm32-timer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 general-purpose 16 and 32 bits timers bindings
+title: STMicroelectronics STM32 general-purpose 16 and 32 bits timers
 
 maintainers:
   - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml
index 61746755c1..f5c0a6283e 100644
--- a/dts/Bindings/trivial-devices.yaml
+++ b/dts/Bindings/trivial-devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/trivial-devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Trivial I2C and SPI devices that have simple device tree bindings
+title: Trivial I2C and SPI devices
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/dts/Bindings/ufs/cdns,ufshc.yaml b/dts/Bindings/ufs/cdns,ufshc.yaml
index fb45f66d64..835e17269d 100644
--- a/dts/Bindings/ufs/cdns,ufshc.yaml
+++ b/dts/Bindings/ufs/cdns,ufshc.yaml
@@ -49,6 +49,8 @@ properties:
   reg:
     maxItems: 1
 
+  dma-coherent: true
+
 required:
   - compatible
   - clocks
diff --git a/dts/Bindings/usb/analogix,anx7411.yaml b/dts/Bindings/usb/analogix,anx7411.yaml
index 0e72c08e65..e4d893369d 100644
--- a/dts/Bindings/usb/analogix,anx7411.yaml
+++ b/dts/Bindings/usb/analogix,anx7411.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analogix ANX7411 Type-C controller bindings
+title: Analogix ANX7411 Type-C controller
 
 maintainers:
   - Xin Ji <xji@analogixsemi.com>
diff --git a/dts/Bindings/usb/cdns,usb3.yaml b/dts/Bindings/usb/cdns,usb3.yaml
index dc9d6ed078..cae46c4982 100644
--- a/dts/Bindings/usb/cdns,usb3.yaml
+++ b/dts/Bindings/usb/cdns,usb3.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cadence USBSS-DRD controller bindings
+title: Cadence USBSS-DRD controller
 
 maintainers:
   - Pawel Laszczak <pawell@cadence.com>
diff --git a/dts/Bindings/usb/dwc2.yaml b/dts/Bindings/usb/dwc2.yaml
index dc4988c000..371ba93f3c 100644
--- a/dts/Bindings/usb/dwc2.yaml
+++ b/dts/Bindings/usb/dwc2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/dwc2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DesignWare HS OTG USB 2.0 controller Bindings
+title: DesignWare HS OTG USB 2.0 controller
 
 maintainers:
   - Rob Herring <robh@kernel.org>
@@ -43,7 +43,10 @@ properties:
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
       - const: lantiq,arx100-usb
+      - const: lantiq,ase-usb
+      - const: lantiq,danube-usb
       - const: lantiq,xrx200-usb
+      - const: lantiq,xrx300-usb
       - items:
           - enum:
               - amlogic,meson8-usb
diff --git a/dts/Bindings/usb/faraday,fotg210.yaml b/dts/Bindings/usb/faraday,fotg210.yaml
index c69bbfbcf7..84b3b69256 100644
--- a/dts/Bindings/usb/faraday,fotg210.yaml
+++ b/dts/Bindings/usb/faraday,fotg210.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/usb/faraday,fotg210.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Faraday Technology FOTG210 HS OTG USB 2.0 controller Bindings
+title: Faraday Technology FOTG210 HS OTG USB 2.0 controller
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml
index c5f629c5bc..994818cb60 100644
--- a/dts/Bindings/usb/generic-ehci.yaml
+++ b/dts/Bindings/usb/generic-ehci.yaml
@@ -30,6 +30,7 @@ properties:
               - allwinner,sun4i-a10-ehci
               - allwinner,sun50i-a64-ehci
               - allwinner,sun50i-h6-ehci
+              - allwinner,sun50i-h616-ehci
               - allwinner,sun5i-a13-ehci
               - allwinner,sun6i-a31-ehci
               - allwinner,sun7i-a20-ehci
diff --git a/dts/Bindings/usb/generic-ohci.yaml b/dts/Bindings/usb/generic-ohci.yaml
index f838f78d61..4fcbd0add4 100644
--- a/dts/Bindings/usb/generic-ohci.yaml
+++ b/dts/Bindings/usb/generic-ohci.yaml
@@ -20,6 +20,7 @@ properties:
               - allwinner,sun4i-a10-ohci
               - allwinner,sun50i-a64-ohci
               - allwinner,sun50i-h6-ohci
+              - allwinner,sun50i-h616-ohci
               - allwinner,sun5i-a13-ohci
               - allwinner,sun6i-a31-ohci
               - allwinner,sun7i-a20-ohci
diff --git a/dts/Bindings/usb/genesys,gl850g.yaml b/dts/Bindings/usb/genesys,gl850g.yaml
new file mode 100644
index 0000000000..a9f831448c
--- /dev/null
+++ b/dts/Bindings/usb/genesys,gl850g.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Genesys Logic GL850G USB 2.0 hub controller
+
+maintainers:
+  - Icenowy Zheng <uwu@icenowy.me>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb5e3,608
+
+  reg: true
+
+  reset-gpios:
+    description: GPIO controlling the RESET# pin.
+
+  vdd-supply:
+    description:
+      the regulator that provides 3.3V core power to the hub.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub: hub@1 {
+            compatible = "usb5e3,608";
+            reg = <1>;
+            reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/dts/Bindings/usb/ingenic,musb.yaml b/dts/Bindings/usb/ingenic,musb.yaml
index 59212358fc..4cc1496a91 100644
--- a/dts/Bindings/usb/ingenic,musb.yaml
+++ b/dts/Bindings/usb/ingenic,musb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/ingenic,musb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ47xx USB IP DT bindings
+title: Ingenic JZ47xx USB IP
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/dts/Bindings/usb/marvell,pxau2o-ehci.yaml b/dts/Bindings/usb/marvell,pxau2o-ehci.yaml
index 3cf93dd45e..a0246aa1f2 100644
--- a/dts/Bindings/usb/marvell,pxau2o-ehci.yaml
+++ b/dts/Bindings/usb/marvell,pxau2o-ehci.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell PXA/MMP EHCI bindings
+title: Marvell PXA/MMP EHCI
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/dts/Bindings/usb/maxim,max33359.yaml b/dts/Bindings/usb/maxim,max33359.yaml
index 93a19eda61..8e513a6af3 100644
--- a/dts/Bindings/usb/maxim,max33359.yaml
+++ b/dts/Bindings/usb/maxim,max33359.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/usb/maxim,max33359.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Maxim TCPCI Type-C PD controller DT bindings
+title: Maxim TCPCI Type-C PD controller
 
 maintainers:
   - Badhri Jagan Sridharan <badhri@google.com>
diff --git a/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml b/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml
index 8db1f8b597..c72257c192 100644
--- a/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml
+++ b/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings
+title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller
 
 maintainers:
   - ChiYuan Huang <cy_huang@richtek.com>
diff --git a/dts/Bindings/usb/mediatek,mtk-xhci.yaml b/dts/Bindings/usb/mediatek,mtk-xhci.yaml
index 939623867a..a3c37944c6 100644
--- a/dts/Bindings/usb/mediatek,mtk-xhci.yaml
+++ b/dts/Bindings/usb/mediatek,mtk-xhci.yaml
@@ -28,6 +28,7 @@ properties:
           - mediatek,mt7622-xhci
           - mediatek,mt7623-xhci
           - mediatek,mt7629-xhci
+          - mediatek,mt7986-xhci
           - mediatek,mt8173-xhci
           - mediatek,mt8183-xhci
           - mediatek,mt8186-xhci
diff --git a/dts/Bindings/usb/mediatek,mtu3.yaml b/dts/Bindings/usb/mediatek,mtu3.yaml
index 80750b0f45..7168110e2f 100644
--- a/dts/Bindings/usb/mediatek,mtu3.yaml
+++ b/dts/Bindings/usb/mediatek,mtu3.yaml
@@ -24,6 +24,7 @@ properties:
           - mediatek,mt2712-mtu3
           - mediatek,mt8173-mtu3
           - mediatek,mt8183-mtu3
+          - mediatek,mt8186-mtu3
           - mediatek,mt8188-mtu3
           - mediatek,mt8192-mtu3
           - mediatek,mt8195-mtu3
diff --git a/dts/Bindings/usb/nvidia,tegra-xudc.yaml b/dts/Bindings/usb/nvidia,tegra-xudc.yaml
index fd6e7c8142..f6cb19efd9 100644
--- a/dts/Bindings/usb/nvidia,tegra-xudc.yaml
+++ b/dts/Bindings/usb/nvidia,tegra-xudc.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
+title: NVIDIA Tegra XUSB device mode controller (XUDC)
 
 description:
   The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
diff --git a/dts/Bindings/usb/nvidia,tegra124-xusb.txt b/dts/Bindings/usb/nvidia,tegra124-xusb.txt
deleted file mode 100644
index 5bfcc0b4d6..0000000000
--- a/dts/Bindings/usb/nvidia,tegra124-xusb.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-NVIDIA Tegra xHCI controller
-============================
-
-The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
-the Tegra XUSB pad controller.
-
-Required properties:
---------------------
-- compatible: Must be:
-  - Tegra124: "nvidia,tegra124-xusb"
-  - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
-  - Tegra210: "nvidia,tegra210-xusb"
-  - Tegra186: "nvidia,tegra186-xusb"
-- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
-  registers and XUSB IPFS registers.
-- reg-names: Must contain the following entries:
-  - "hcd"
-  - "fpci"
-  - "ipfs"
-- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-   - xusb_host
-   - xusb_host_src
-   - xusb_falcon_src
-   - xusb_ss
-   - xusb_ss_src
-   - xusb_ss_div2
-   - xusb_hs_src
-   - xusb_fs_src
-   - pll_u_480m
-   - clk_m
-   - pll_e
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - xusb_host
-  - xusb_ss
-  - xusb_src
-  Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
-- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to
-  configure the USB pads used by the XHCI controller
-
-For Tegra124 and Tegra132:
-- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
-- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.
-
-For Tegra210:
-- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
-
-For Tegra210 and Tegra186:
-- power-domains: A list of PM domain specifiers that reference each power-domain
-  used by the xHCI controller. This list must comprise of a specifier for the
-  XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
-  ../arm/tegra/nvidia,tegra20-pmc.txt for details.
-- power-domain-names: A list of names that represent each of the specifiers in
-  the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
-  represent the power-domains XUSBA and XUSBC, respectively. See
-  ../power/power_domain.txt for details.
-
-Optional properties:
---------------------
-- phys: Must contain an entry for each entry in phy-names.
-  See ../phy/phy-bindings.txt for details.
-- phy-names: Should include an entry for each PHY used by the controller. The
-  following PHYs are available:
-  - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
-  - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
-  - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
-              usb3-3
-  - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
-
-Example:
---------
-
-	usb@0,70090000 {
-		compatible = "nvidia,tegra124-xusb";
-		reg = <0x0 0x70090000 0x0 0x8000>,
-		      <0x0 0x70098000 0x0 0x1000>,
-		      <0x0 0x70099000 0x0 0x1000>;
-		reg-names = "hcd", "fpci", "ipfs";
-
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
-			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
-			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
-			 <&tegra_car TEGRA124_CLK_CLK_M>,
-			 <&tegra_car TEGRA124_CLK_PLL_E>;
-		clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
-			      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
-			      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
-			      "clk_m", "pll_e";
-		resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
-		reset-names = "xusb_host", "xusb_ss", "xusb_src";
-
-		nvidia,xusb-padctl = <&padctl>;
-
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
-		phy-names = "usb2-1", "usb2-2", "usb3-0";
-
-		avddio-pex-supply = <&vdd_1v05_run>;
-		dvddio-pex-supply = <&vdd_1v05_run>;
-		avdd-usb-supply = <&vdd_3v3_lp0>;
-		avdd-pll-utmip-supply = <&vddio_1v8>;
-		avdd-pll-erefe-supply = <&avdd_1v05_run>;
-		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
-		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
-		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
-	};
diff --git a/dts/Bindings/usb/nvidia,tegra124-xusb.yaml b/dts/Bindings/usb/nvidia,tegra124-xusb.yaml
new file mode 100644
index 0000000000..d6ca8c9307
--- /dev/null
+++ b/dts/Bindings/usb/nvidia,tegra124-xusb.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  # required
+  compatible:
+    oneOf:
+      - description: NVIDIA Tegra124
+        const: nvidia,tegra124-xusb
+
+      - description: NVIDIA Tegra132
+        items:
+          - const: nvidia,tegra132-xusb
+          - const: nvidia,tegra124-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+      - description: base and length of the XUSB IPFS registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB host source clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed clock divider
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_host_src
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_div2
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  resets:
+    items:
+      - description: reset for the XUSB host controller
+      - description: reset for the SuperSpeed logic
+      - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+  reset-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+      - const: xusb_src
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  # optional
+  phys:
+    minItems: 1
+    maxItems: 7
+
+  phy-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - hsic-0
+        - hsic-1
+        - usb3-0
+        - usb3-1
+
+  avddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-erefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  avdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 3.3 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+  - avddio-pex-supply
+  - dvddio-pex-supply
+  - avdd-usb-supply
+  - hvdd-usb-ss-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@70090000 {
+        compatible = "nvidia,tegra124-xusb";
+        reg = <0x70090000 0x8000>,
+              <0x70098000 0x1000>,
+              <0x70099000 0x1000>;
+        reg-names = "hcd", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+                 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+                 <&tegra_car TEGRA124_CLK_CLK_M>,
+                 <&tegra_car TEGRA124_CLK_PLL_E>;
+        clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
+                      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
+                      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
+                      "clk_m", "pll_e";
+        resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
+        reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&phy_usb2_1>, <&phy_usb2_2>, <&phy_pcie_0>;
+        phy-names = "usb2-1", "usb2-2", "usb3-0";
+
+        avddio-pex-supply = <&vdd_1v05_run>;
+        dvddio-pex-supply = <&vdd_1v05_run>;
+        avdd-usb-supply = <&vdd_3v3_lp0>;
+        avdd-pll-utmip-supply = <&vddio_1v8>;
+        avdd-pll-erefe-supply = <&avdd_1v05_run>;
+        avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+        hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+        hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+    };
diff --git a/dts/Bindings/usb/nvidia,tegra186-xusb.yaml b/dts/Bindings/usb/nvidia,tegra186-xusb.yaml
new file mode 100644
index 0000000000..a04c6ce1e0
--- /dev/null
+++ b/dts/Bindings/usb/nvidia,tegra186-xusb.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  interconnects:
+    items:
+      - description: read client
+      - description: write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 7
+
+  phy-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - hsic-0
+        - usb3-0
+        - usb3-1
+        - usb3-2
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    usb@3530000 {
+        compatible = "nvidia,tegra186-xusb";
+        reg = <0x03530000 0x8000>,
+              <0x03538000 0x1000>;
+        reg-names = "hcd", "fpci";
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
+                 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
+                 <&bpmp TEGRA186_CLK_XUSB_SS>,
+                 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+                 <&bpmp TEGRA186_CLK_CLK_M>,
+                 <&bpmp TEGRA186_CLK_XUSB_FS>,
+                 <&bpmp TEGRA186_CLK_PLLU>,
+                 <&bpmp TEGRA186_CLK_CLK_M>,
+                 <&bpmp TEGRA186_CLK_PLLE>;
+        clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+                      "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+                      "pll_u_480m", "clk_m", "pll_e";
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
+                        <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+        power-domain-names = "xusb_host", "xusb_ss";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
+        nvidia,xusb-padctl = <&padctl>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb3_0>;
+        phy-names = "usb2-0", "usb2-1", "usb3-0";
+    };
diff --git a/dts/Bindings/usb/nvidia,tegra194-xusb.yaml b/dts/Bindings/usb/nvidia,tegra194-xusb.yaml
new file mode 100644
index 0000000000..b356793f73
--- /dev/null
+++ b/dts/Bindings/usb/nvidia,tegra194-xusb.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra194-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  interconnects:
+    items:
+      - description: read client
+      - description: write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - usb2-3
+        - usb3-0
+        - usb3-1
+        - usb3-2
+        - usb3-3
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    usb@3610000 {
+        compatible = "nvidia,tegra194-xusb";
+        reg = <0x03610000 0x40000>,
+              <0x03600000 0x10000>;
+        reg-names = "hcd", "fpci";
+
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+                 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+                 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+                 <&bpmp TEGRA194_CLK_XUSB_SS>,
+                 <&bpmp TEGRA194_CLK_CLK_M>,
+                 <&bpmp TEGRA194_CLK_XUSB_FS>,
+                 <&bpmp TEGRA194_CLK_UTMIPLL>,
+                 <&bpmp TEGRA194_CLK_CLK_M>,
+                 <&bpmp TEGRA194_CLK_PLLE>;
+        clock-names = "xusb_host", "xusb_falcon_src",
+                      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+                      "xusb_fs_src", "pll_u_480m", "clk_m",
+                      "pll_e";
+        interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+                        <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA194_SID_XUSB_HOST>;
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+                        <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+        power-domain-names = "xusb_host", "xusb_ss";
+
+        nvidia,xusb-padctl = <&xusb_padctl>;
+
+        phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb2_3>, <&phy_usb3_0>,
+               <&phy_usb3_2>, <&phy_usb3_3>;
+        phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
+    };
diff --git a/dts/Bindings/usb/nvidia,tegra210-xusb.yaml b/dts/Bindings/usb/nvidia,tegra210-xusb.yaml
new file mode 100644
index 0000000000..90296613b3
--- /dev/null
+++ b/dts/Bindings/usb/nvidia,tegra210-xusb.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra210-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+      - description: base and length of the XUSB IPFS registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB host source clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed clock divider
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_host_src
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_div2
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  resets:
+    items:
+      - description: reset for the XUSB host controller
+      - description: reset for the SuperSpeed logic
+      - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+  reset-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+      - const: xusb_src
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 9
+
+  phy-names:
+    minItems: 1
+    maxItems: 9
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - usb2-3
+        - hsic-0
+        - usb3-0
+        - usb3-1
+        - usb3-2
+        - usb3-3
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@70090000 {
+        compatible = "nvidia,tegra210-xusb";
+        reg = <0x70090000 0x8000>,
+              <0x70098000 0x1000>,
+              <0x70099000 0x1000>;
+        reg-names = "hcd", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+                 <&tegra_car TEGRA210_CLK_CLK_M>,
+                 <&tegra_car TEGRA210_CLK_PLL_E>;
+        clock-names = "xusb_host", "xusb_host_src",
+                      "xusb_falcon_src", "xusb_ss",
+                      "xusb_ss_div2", "xusb_ss_src",
+                      "xusb_hs_src", "xusb_fs_src",
+                      "pll_u_480m", "clk_m", "pll_e";
+        resets = <&tegra_car 89>, <&tegra_car 156>,
+                 <&tegra_car 143>;
+        reset-names = "xusb_host", "xusb_ss", "xusb_src";
+        power-domains = <&pd_xusbhost>, <&pd_xusbss>;
+        power-domain-names = "xusb_host", "xusb_ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb2_2>, <&phy_usb2_3>,
+               <&phy_pcie_6>, <&phy_pcie_5>;
+        phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+                    "usb3-1";
+        dvddio-pex-supply = <&vdd_pex_1v05>;
+        hvddio-pex-supply = <&vdd_1v8>;
+        avdd-usb-supply = <&vdd_3v3_sys>;
+        avdd-pll-utmip-supply = <&vdd_1v8>;
+        avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+        dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+        hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+                compatible = "usb955,9ff";
+                reg = <1>;
+        };
+    };
diff --git a/dts/Bindings/usb/nxp,isp1760.yaml b/dts/Bindings/usb/nxp,isp1760.yaml
index f238848ad0..e2743a4b95 100644
--- a/dts/Bindings/usb/nxp,isp1760.yaml
+++ b/dts/Bindings/usb/nxp,isp1760.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP ISP1760 family controller bindings
+title: NXP ISP1760 family controller
 
 maintainers:
   - Sebastian Siewior <bigeasy@linutronix.de>
diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml
index a6e6abb4df..a3f8a3f498 100644
--- a/dts/Bindings/usb/qcom,dwc3.yaml
+++ b/dts/Bindings/usb/qcom,dwc3.yaml
@@ -39,6 +39,7 @@ properties:
           - qcom,sm8250-dwc3
           - qcom,sm8350-dwc3
           - qcom,sm8450-dwc3
+          - qcom,sm8550-dwc3
       - const: qcom,dwc3
 
   reg:
@@ -301,6 +302,7 @@ allOf:
               - qcom,sm8150-dwc3
               - qcom,sm8250-dwc3
               - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
     then:
       properties:
         clocks:
@@ -358,6 +360,7 @@ allOf:
               - qcom,sm8250-dwc3
               - qcom,sm8350-dwc3
               - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
     then:
       properties:
         interrupts:
diff --git a/dts/Bindings/usb/realtek,rts5411.yaml b/dts/Bindings/usb/realtek,rts5411.yaml
index 50f2b505bd..623d04a88a 100644
--- a/dts/Bindings/usb/realtek,rts5411.yaml
+++ b/dts/Bindings/usb/realtek,rts5411.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for the Realtek RTS5411 USB 3.0 hub controller
+title: Realtek RTS5411 USB 3.0 hub controller
 
 maintainers:
   - Matthias Kaehlcke <mka@chromium.org>
diff --git a/dts/Bindings/usb/richtek,rt1719.yaml b/dts/Bindings/usb/richtek,rt1719.yaml
index 65a93f7738..e3e87e4d32 100644
--- a/dts/Bindings/usb/richtek,rt1719.yaml
+++ b/dts/Bindings/usb/richtek,rt1719.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/usb/richtek,rt1719.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Richtek RT1719 sink-only Type-C PD controller bindings
+title: Richtek RT1719 sink-only Type-C PD controller
 
 maintainers:
   - ChiYuan Huang <cy_huang@richtek.com>
diff --git a/dts/Bindings/usb/st,stusb160x.yaml b/dts/Bindings/usb/st,stusb160x.yaml
index b8974807b6..ffcd9897ea 100644
--- a/dts/Bindings/usb/st,stusb160x.yaml
+++ b/dts/Bindings/usb/st,stusb160x.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STUSB160x Type-C controller bindings
+title: STMicroelectronics STUSB160x Type-C controller
 
 maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
diff --git a/dts/Bindings/usb/ti,j721e-usb.yaml b/dts/Bindings/usb/ti,j721e-usb.yaml
index eedde385d2..f81ba3e902 100644
--- a/dts/Bindings/usb/ti,j721e-usb.yaml
+++ b/dts/Bindings/usb/ti,j721e-usb.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/usb/ti,j721e-usb.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller
+title: TI wrapper module for the Cadence USBSS-DRD controller
 
 maintainers:
   - Roger Quadros <rogerq@kernel.org>
diff --git a/dts/Bindings/usb/ti,tps6598x.yaml b/dts/Bindings/usb/ti,tps6598x.yaml
index a4c53b1f1a..fef4acdc47 100644
--- a/dts/Bindings/usb/ti,tps6598x.yaml
+++ b/dts/Bindings/usb/ti,tps6598x.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/usb/ti,tps6598x.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller DT bindings
+title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller
 
 maintainers:
   - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
diff --git a/dts/Bindings/usb/ti,usb8041.yaml b/dts/Bindings/usb/ti,usb8041.yaml
index e04fbd8ab0..88ea6c952c 100644
--- a/dts/Bindings/usb/ti,usb8041.yaml
+++ b/dts/Bindings/usb/ti,usb8041.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for the TI USB8041 USB 3.0 hub controller
+title: TI USB8041 USB 3.0 hub controller
 
 maintainers:
   - Alexander Stein <alexander.stein@ew.tq-group.com>
diff --git a/dts/Bindings/usb/usb-device.yaml b/dts/Bindings/usb/usb-device.yaml
index b77960a7a3..7a771125ec 100644
--- a/dts/Bindings/usb/usb-device.yaml
+++ b/dts/Bindings/usb/usb-device.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/usb-device.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: The device tree bindings for the Generic USB Device
+title: Generic USB Device
 
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/dts/Bindings/usb/usb-drd.yaml b/dts/Bindings/usb/usb-drd.yaml
index 1567549b05..114fb5dc04 100644
--- a/dts/Bindings/usb/usb-drd.yaml
+++ b/dts/Bindings/usb/usb-drd.yaml
@@ -27,6 +27,7 @@ properties:
       should default to OTG.
     $ref: /schemas/types.yaml#/definitions/string
     enum: [host, peripheral, otg]
+    default: otg
 
   hnp-disable:
     description:
diff --git a/dts/Bindings/usb/usb-nop-xceiv.yaml b/dts/Bindings/usb/usb-nop-xceiv.yaml
index 2824c17285..326131dcf1 100644
--- a/dts/Bindings/usb/usb-nop-xceiv.yaml
+++ b/dts/Bindings/usb/usb-nop-xceiv.yaml
@@ -39,6 +39,11 @@ properties:
       the VBus line.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  wakeup-source:
+    description:
+      Specify if the USB phy can detect the remote wakeup signal
+      while the system sleep.
+
 required:
   - compatible
   - '#phy-cells'
diff --git a/dts/Bindings/usb/usb251xb.txt b/dts/Bindings/usb/usb251xb.txt
deleted file mode 100644
index 1a934eab17..0000000000
--- a/dts/Bindings/usb/usb251xb.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-Microchip USB 2.0 Hi-Speed Hub Controller
-
-The device node for the configuration of a Microchip USB251x/xBi USB 2.0
-Hi-Speed Controller.
-
-Required properties :
- - compatible : Should be "microchip,usb251xb" or one of the specific types:
-	"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
-	"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi",
-	"microchip,usb2517", "microchip,usb2517i", "microchip,usb2422"
- - reg : I2C address on the selected bus (default is <0x2C>)
-
-Optional properties :
- - reset-gpios : Should specify the gpio for hub reset
- - vdd-supply : Should specify the phandle to the regulator supplying vdd
- - skip-config : Skip Hub configuration, but only send the USB-Attach command
- - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
- - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
- - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
- - language-id : Set USB Language ID (16 bit, default is 0x0000)
- - manufacturer : Set USB Manufacturer string (max 31 characters long)
- - product : Set USB Product string (max 31 characters long)
- - serial : Set USB Serial string (max 31 characters long)
- - {bus,self}-powered : selects between self- and bus-powered operation
-	(boolean, default is self-powered)
- - disable-hi-speed : disable USB Hi-Speed support (boolean)
- - {multi,single}-tt : selects between multi- and single-transaction-translator
-	(boolean, default is multi-tt)
- - disable-eop : disable End of Packet generation in full-speed mode (boolean)
- - {ganged,individual}-sensing : select over-current sense type in self-powered
-	mode (boolean, default is individual)
- - {ganged,individual}-port-switching : select port power switching mode
-	(boolean, default is individual)
- - dynamic-power-switching : enable auto-switching from self- to bus-powered
-	operation if the local power source is removed or unavailable (boolean)
- - oc-delay-us : Delay time (in microseconds) for filtering the over-current
-	sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
-	an invalid value is given, the default is used instead.
- - compound-device : indicate the hub is part of a compound device (boolean)
- - port-mapping-mode : enable port mapping mode (boolean)
- - led-{usb,speed}-mode : led usb/speed indication mode selection
-	(boolean, default is speed mode)
- - string-support : enable string descriptor support (required for manufacturer,
-	product and serial string configuration)
- - non-removable-ports : Should specify the ports which have a non-removable
-	device connected.
- - sp-disabled-ports : Specifies the ports which will be self-power disabled
- - bp-disabled-ports : Specifies the ports which will be bus-power disabled
- - sp-max-total-current-microamp: Specifies max current consumed by the hub
-	from VBUS when operating in self-powered hub. It includes the hub
-	silicon along with all associated circuitry including a permanently
-	attached peripheral (range: 0 - 100000 uA, default 1000 uA)
- - bp-max-total-current-microamp: Specifies max current consumed by the hub
-	from VBUS when operating in self-powered hub. It includes the hub
-	silicon along with all associated circuitry including a permanently
-	attached peripheral (range: 0 - 510000 uA, default 100000 uA)
- - sp-max-removable-current-microamp: Specifies max current consumed by the hub
-	from VBUS when operating in self-powered hub. It includes the hub
-	silicon along with all associated circuitry excluding a permanently
-	attached peripheral (range: 0 - 100000 uA, default 1000 uA)
- - bp-max-removable-current-microamp: Specifies max current consumed by the hub
-	from VBUS when operating in self-powered hub. It includes the hub
-	silicon along with all associated circuitry excluding a permanently
-	attached peripheral (range: 0 - 510000 uA, default 100000 uA)
- - power-on-time-ms : Specifies the time it takes from the time the host
-	initiates the power-on sequence to a port until the port has adequate
-	power. The value is given in ms in a 0 - 510 range (default is 100ms).
- - swap-dx-lanes : Specifies the ports which will swap the differential-pair
-	(D+/D-), default is not-swapped.
-
-Examples:
-	usb2512b@2c {
-		compatible = "microchip,usb2512b";
-		reg = <0x2c>;
-		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	};
-
-	usb2514b@2c {
-		compatible = "microchip,usb2514b";
-		reg = <0x2c>;
-		vendor-id = /bits/ 16 <0x0000>;
-		product-id = /bits/ 16 <0x0000>;
-		string-support;
-		manufacturer = "Foo";
-		product = "Foo-Bar";
-		serial = "1234567890A";
-		/* correct misplaced usb connectors on port 1,2 */
-		swap-dx-lanes = <1 2>;
-	};
diff --git a/dts/Bindings/usb/usb251xb.yaml b/dts/Bindings/usb/usb251xb.yaml
new file mode 100644
index 0000000000..4d15308168
--- /dev/null
+++ b/dts/Bindings/usb/usb251xb.yaml
@@ -0,0 +1,271 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb251xb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB 2.0 Hi-Speed Hub Controller
+
+maintainers:
+  - Richard Leitner <richard.leitner@skidata.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,usb2422
+      - microchip,usb2512b
+      - microchip,usb2512bi
+      - microchip,usb2513b
+      - microchip,usb2513bi
+      - microchip,usb2514b
+      - microchip,usb2514bi
+      - microchip,usb2517
+      - microchip,usb2517i
+      - microchip,usb251xb
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: |
+      Should specify the gpio for hub reset
+
+  vdd-supply:
+    description: |
+      Should specify the phandle to the regulator supplying vdd
+
+  skip-config:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Skip Hub configuration, but only send the USB-Attach command
+
+  vendor-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0x0424
+    description: |
+      Set USB Vendor ID of the hub
+
+  product-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description: |
+      Set USB Product ID of the hub
+
+  device-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0x0bb3
+    description: |
+      Set USB Device ID of the hub
+
+  language-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0x0000
+    description: |
+      Set USB Language ID
+
+  manufacturer:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Set USB Manufacturer string (max 31 characters long)
+
+  product:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Set USB Product string (max 31 characters long)
+
+  serial:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Set USB Serial string (max 31 characters long)
+
+  bus-powered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between self- and bus-powered operation
+      (boolean, default is self-powered)
+
+  self-powered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between self- and bus-powered operation
+      (boolean, default is self-powered)
+
+  disable-hi-speed:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      disable USB Hi-Speed support (boolean)
+
+  multi-tt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between multi- and single-transaction-translator
+      (boolean, default is multi-tt)
+
+  single-tt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between multi- and single-transaction-translator
+      (boolean, default is multi-tt)
+
+  disable-eop:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      disable End of Packet generation in full-speed mode (boolean)
+
+  ganged-sensing:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select over-current sense type in self-powered mode
+      (boolean, default is individual)
+
+  individual-sensing:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select over-current sense type in self-powered mode
+      (boolean, default is individual)
+
+  ganged-port-switching:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select port power switching mode (boolean, default is individual)
+
+  individual-port-switching:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select port power switching mode (boolean, default is individual)
+
+  dynamic-power-switching:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      enable auto-switching from self- to bus-powered operation if the
+      local power source is removed or unavailable (boolean)
+
+  oc-delay-us:
+    enum: [100, 4000, 8000, 16000]
+    default: 8000
+    description: |
+      Delay time (in microseconds) for filtering the over-current sense
+      inputs. If an invalid value is given, the default is used instead.
+
+  compound-device:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      indicate the hub is part of a compound device (boolean)
+
+  port-mapping-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      enable port mapping mode (boolean)
+
+  led-usb-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      led usb/speed indication mode selection (boolean, default is speed mode)
+
+  led-speed-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      led usb/speed indication mode selection (boolean, default is speed mode)
+
+  string-support:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      enable string descriptor support (required for manufacturer, product
+      and serial string configuration)
+
+  non-removable-ports:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Should specify the ports which have a non-removable device connected.
+
+  sp-disabled-ports:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Specifies the ports which will be self-power disabled
+
+  bp-disabled-ports:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Specifies the ports which will be bus-power disabled
+
+  sp-max-total-current-microamp:
+    maximum: 100000
+    default: 1000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry including a permanently
+      attached peripheral.
+
+  bp-max-total-current-microamp:
+    maximum: 510000
+    default: 100000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry including a permanently
+      attached peripheral.
+
+  sp-max-removable-current-microamp:
+    maximum: 100000
+    default: 1000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry excluding a permanently
+      attached peripheral.
+
+  bp-max-removable-current-microamp:
+    maximum: 510000
+    default: 100000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry excluding a permanently
+      attached peripheral.
+
+  power-on-time-ms:
+    maximum: 510
+    default: 100
+    description: |
+      Specifies the time it takes from the time the host initiates the
+      power-on sequence to a port until the port has adequate power.
+
+  swap-dx-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Specifies the ports which will swap the differential-pair (D+/D-),
+      default is not-swapped.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usb-hub@2c {
+        compatible = "microchip,usb2512b";
+        reg = <0x2c>;
+        reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+      };
+
+      usb-hub@2d {
+        compatible = "microchip,usb2514b";
+        reg = <0x2d>;
+        vendor-id = /bits/ 16 <0x0000>;
+        product-id = /bits/ 16 <0x0000>;
+        string-support;
+        manufacturer = "Foo";
+        product = "Foo-Bar";
+        serial = "1234567890A";
+        /* correct misplaced usb connectors on port 1,2 */
+        swap-dx-lanes = <1 2>;
+      };
+    };
diff --git a/dts/Bindings/usb/willsemi,wusb3801.yaml b/dts/Bindings/usb/willsemi,wusb3801.yaml
index 5aa4ffd671..937670de01 100644
--- a/dts/Bindings/usb/willsemi,wusb3801.yaml
+++ b/dts/Bindings/usb/willsemi,wusb3801.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/willsemi,wusb3801.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: WUSB3801 Type-C port controller DT bindings
+title: WUSB3801 Type-C port controller
 
 description:
   The Will Semiconductor WUSB3801 is a USB Type-C port controller which
diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml
index 6e323a3802..70ffb37806 100644
--- a/dts/Bindings/vendor-prefixes.yaml
+++ b/dts/Bindings/vendor-prefixes.yaml
@@ -69,6 +69,8 @@ patternProperties:
     description: Annapurna Labs
   "^alcatel,.*":
     description: Alcatel
+  "^alfa-network,.*":
+    description: ALFA Network Inc.
   "^allegro,.*":
     description: Allegro DVT
   "^allo,.*":
@@ -196,10 +198,10 @@ patternProperties:
     description: Bosch Sensortec GmbH
   "^boundary,.*":
     description: Boundary Devices Inc.
-  "^broadmobi,.*":
-    description: Shanghai Broadmobi Communication Technology Co.,Ltd.
   "^brcm,.*":
     description: Broadcom Corporation
+  "^broadmobi,.*":
+    description: Shanghai Broadmobi Communication Technology Co.,Ltd.
   "^bsh,.*":
     description: BSH Hausgeraete GmbH
   "^bticino,.*":
@@ -246,6 +248,8 @@ patternProperties:
     description: ChipOne
   "^chipspark,.*":
     description: ChipSPARK
+  "^chongzhou,.*":
+    description: Shenzhen Chongzhou Electronic Technology Co., Ltd
   "^chrontel,.*":
     description: Chrontel, Inc.
   "^chrp,.*":
@@ -260,6 +264,8 @@ patternProperties:
     description: Cirrus Logic, Inc.
   "^cisco,.*":
     description: Cisco Systems, Inc.
+  "^cloos,.*":
+    description: Carl Cloos Schweisstechnik GmbH.
   "^cloudengines,.*":
     description: Cloud Engines, Inc.
   "^cnm,.*":
@@ -488,6 +494,8 @@ patternProperties:
     description: GE Fanuc Intelligent Platforms Embedded Systems, Inc.
   "^gemei,.*":
     description: Gemei Digital Technology Co., Ltd.
+  "^genesys,.*":
+    description: Genesys Logic, Inc.
   "^geniatech,.*":
     description: Geniatech, Inc.
   "^giantec,.*":
@@ -541,6 +549,8 @@ patternProperties:
     description: Hitex Development Tools
   "^holt,.*":
     description: Holt Integrated Circuits, Inc.
+  "^holtek,.*":
+    description: Holtek Semiconductor, Inc.
   "^honestar,.*":
     description: Honestar Technologies Co., Ltd.
   "^honeywell,.*":
@@ -553,8 +563,6 @@ patternProperties:
     description: Hewlett Packard Enterprise
   "^hsg,.*":
     description: HannStar Display Co.
-  "^holtek,.*":
-    description: Holtek Semiconductor, Inc.
   "^huawei,.*":
     description: Huawei Technologies Co., Ltd.
   "^hugsun,.*":
@@ -567,6 +575,8 @@ patternProperties:
     description: Hycon Technology Corp.
   "^hydis,.*":
     description: Hydis Technologies
+  "^hynitron,.*":
+    description: Shanghai Hynitron Microelectronics Co. Ltd.
   "^hynix,.*":
     description: SK Hynix Inc.
   "^hyundai,.*":
@@ -597,14 +607,14 @@ patternProperties:
     description: Infineon Technologies
   "^inforce,.*":
     description: Inforce Computing
-  "^ingrasys,.*":
-    description: Ingrasys Technology Inc.
-  "^ivo,.*":
-    description: InfoVision Optoelectronics Kunshan Co. Ltd.
   "^ingenic,.*":
     description: Ingenic Semiconductor
+  "^ingrasys,.*":
+    description: Ingrasys Technology Inc.
   "^injoinic,.*":
     description: Injoinic Technology Corp.
+  "^innocomm,.*":
+    description: InnoComm Mobile Technology Corp.
   "^innolux,.*":
     description: Innolux Corporation
   "^inside-secure,.*":
@@ -637,8 +647,12 @@ patternProperties:
     description: ITEAD Intelligent Systems Co.Ltd
   "^itian,.*":
     description: ITian Corporation
+  "^ivo,.*":
+    description: InfoVision Optoelectronics Kunshan Co. Ltd.
   "^iwave,.*":
     description: iWave Systems Technologies Pvt. Ltd.
+  "^jadard,.*":
+    description: Jadard Technology Inc.
   "^jdi,.*":
     description: Japan Display Inc.
   "^jedec,.*":
@@ -883,12 +897,14 @@ patternProperties:
     description: Shenzhen Netxeon Technology CO., LTD
   "^neweast,.*":
     description: Guangdong Neweast Optoelectronics CO., LTD
+  "^newhaven,.*":
+    description: Newhaven Display International
+  "^newvision,.*":
+    description: New Vision Display (Shenzhen) Co., Ltd.
   "^nexbox,.*":
     description: Nexbox
   "^nextthing,.*":
     description: Next Thing Co.
-  "^newhaven,.*":
-    description: Newhaven Display International
   "^ni,.*":
     description: National Instruments
   "^nintendo,.*":
@@ -927,6 +943,8 @@ patternProperties:
     description: One Laptop Per Child
   "^oneplus,.*":
     description: OnePlus Technology (Shenzhen) Co., Ltd.
+  "^onie,.*":
+    description: Open Network Install Environment group
   "^onion,.*":
     description: Onion Corporation
   "^onnn,.*":
@@ -1035,10 +1053,10 @@ patternProperties:
     description: QEMU, a generic and open source machine emulator and virtualizer
   "^qi,.*":
     description: Qi Hardware
-  "^qihua,.*":
-    description: Chengdu Kaixuan Information Technology Co., Ltd.
   "^qiaodian,.*":
     description: QiaoDian XianShi Corporation
+  "^qihua,.*":
+    description: Chengdu Kaixuan Information Technology Co., Ltd.
   "^qishenglong,.*":
     description: Shenzhen QiShenglong Industrialist Co., Ltd.
   "^qnap,.*":
@@ -1065,22 +1083,22 @@ patternProperties:
     description: reMarkable AS
   "^renesas,.*":
     description: Renesas Electronics Corporation
-  "^rex,.*":
-    description: iMX6 Rex Project
   "^rervision,.*":
     description: Shenzhen Rervision Technology Co., Ltd.
   "^revotics,.*":
     description: Revolution Robotics, Inc. (Revotics)
+  "^rex,.*":
+    description: iMX6 Rex Project
   "^richtek,.*":
     description: Richtek Technology Corporation
   "^ricoh,.*":
     description: Ricoh Co. Ltd.
   "^rikomagic,.*":
     description: Rikomagic Tech Corp. Ltd
-  "^riscv,.*":
-    description: RISC-V Foundation
   "^riot,.*":
     description: Embest RIoT
+  "^riscv,.*":
+    description: RISC-V Foundation
   "^rockchip,.*":
     description: Fuzhou Rockchip Electronics Co., Ltd
   "^rocktech,.*":
@@ -1143,6 +1161,8 @@ patternProperties:
     description: Si-En Technology Ltd.
   "^si-linux,.*":
     description: Silicon Linux Corporation
+  "^siemens,.*":
+    description: Siemens AG
   "^sifive,.*":
     description: SiFive, Inc.
   "^sigma,.*":
@@ -1165,8 +1185,8 @@ patternProperties:
     description: Siliconfile Technologies lnc.
   "^siliconmitus,.*":
     description: Silicon Mitus, Inc.
-  "^siemens,.*":
-    description: Siemens AG
+  "^silvaco,.*":
+    description: Silvaco, Inc.
   "^simtek,.*":
     description: Cypress Semiconductor Corporation (Simtek Corporation)
   "^sinlinx,.*":
@@ -1252,8 +1272,6 @@ patternProperties:
     description: Sun Microsystems, Inc
   "^supermicro,.*":
     description: Super Micro Computer, Inc.
-  "^silvaco,.*":
-    description: Silvaco, Inc.
   "^swir,.*":
     description: Sierra Wireless
   "^syna,.*":
@@ -1275,16 +1293,18 @@ patternProperties:
     description: Shenzhen City Tang Cheng Technology Co., Ltd.
   "^tdo,.*":
     description: Shangai Top Display Optoelectronics Co., Ltd
+  "^team-source-display,.*":
+    description: Shenzhen Team Source Display Technology Co., Ltd. (TSD)
   "^technexion,.*":
     description: TechNexion
   "^technologic,.*":
     description: Technologic Systems
+  "^techstar,.*":
+    description: Shenzhen Techstar Electronics Co., Ltd.
   "^teltonika,.*":
     description: Teltonika Networks
   "^tempo,.*":
     description: Tempo Semiconductor
-  "^techstar,.*":
-    description: Shenzhen Techstar Electronics Co., Ltd.
   "^terasic,.*":
     description: Terasic Inc.
   "^tesla,.*":
@@ -1338,10 +1358,6 @@ patternProperties:
     description: Tronsmart
   "^truly,.*":
     description: Truly Semiconductors Limited
-  "^visionox,.*":
-    description: Visionox
-  "^team-source-display,.*":
-    description: Shenzhen Team Source Display Technology Co., Ltd. (TSD)
   "^tsd,.*":
     description: Theobroma Systems Design und Consulting GmbH
   "^tyan,.*":
@@ -1350,10 +1366,10 @@ patternProperties:
     description: u-blox
   "^u-boot,.*":
     description: U-Boot bootloader
-  "^ucrobotics,.*":
-    description: uCRobotics
   "^ubnt,.*":
     description: Ubiquiti Networks
+  "^ucrobotics,.*":
+    description: uCRobotics
   "^udoo,.*":
     description: Udoo
   "^ugoos,.*":
@@ -1392,6 +1408,8 @@ patternProperties:
     description: Used for virtual device without specific vendor.
   "^vishay,.*":
     description: Vishay Intertechnology, Inc
+  "^visionox,.*":
+    description: Visionox
   "^vitesse,.*":
     description: Vitesse Semiconductor Corporation
   "^vivante,.*":
@@ -1406,6 +1424,8 @@ patternProperties:
     description: Vision Optical Technology Co., Ltd.
   "^vxt,.*":
     description: VXT Ltd
+  "^wanchanglong,.*":
+    description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^wand,.*":
     description: Wandbord (Technexion)
   "^waveshare,.*":
@@ -1446,8 +1466,6 @@ patternProperties:
     description: Wondermedia Technologies, Inc.
   "^wobo,.*":
     description: Wobo
-  "^wanchanglong,.*":
-    description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^x-powers,.*":
     description: X-Powers
   "^xen,.*":
@@ -1490,10 +1508,10 @@ patternProperties:
     description: Shenzhen Yashi Changhua Intelligent Technology Co., Ltd.
   "^ysoft,.*":
     description: Y Soft Corporation a.s.
-  "^zealz,.*":
-    description: Zealz
   "^zarlink,.*":
     description: Zarlink Semiconductor
+  "^zealz,.*":
+    description: Zealz
   "^zeitec,.*":
     description: ZEITEC Semiconductor Co., LTD.
   "^zidoo,.*":
diff --git a/dts/Bindings/virtio/virtio-device.yaml b/dts/Bindings/virtio/virtio-device.yaml
index 1778ea9b5a..8c6919ba94 100644
--- a/dts/Bindings/virtio/virtio-device.yaml
+++ b/dts/Bindings/virtio/virtio-device.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/virtio/virtio-device.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Virtio device bindings
+title: Virtio device
 
 maintainers:
   - Viresh Kumar <viresh.kumar@linaro.org>
diff --git a/dts/Bindings/watchdog/fsl,scu-wdt.yaml b/dts/Bindings/watchdog/fsl,scu-wdt.yaml
index f84c45d687..47701248cd 100644
--- a/dts/Bindings/watchdog/fsl,scu-wdt.yaml
+++ b/dts/Bindings/watchdog/fsl,scu-wdt.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX SCU Client Device Node - Watchdog bindings based on SCU Message Protocol
+title: i.MX SCU Client Device Node - Watchdog Based on SCU Message Protocol
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
diff --git a/dts/Bindings/watchdog/gpio-wdt.txt b/dts/Bindings/watchdog/gpio-wdt.txt
deleted file mode 100644
index 1987949637..0000000000
--- a/dts/Bindings/watchdog/gpio-wdt.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* GPIO-controlled Watchdog
-
-Required Properties:
-- compatible: Should contain "linux,wdt-gpio".
-- gpios: From common gpio binding; gpio connection to WDT reset pin.
-- hw_algo: The algorithm used by the driver. Should be one of the
-  following values:
-  - toggle: Either a high-to-low or a low-to-high transition clears
-    the WDT counter. The watchdog timer is disabled when GPIO is
-    left floating or connected to a three-state buffer.
-  - level: Low or high level starts counting WDT timeout,
-    the opposite level disables the WDT. Active level is determined
-    by the GPIO flags.
-- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
-
-Optional Properties:
-- always-running: If the watchdog timer cannot be disabled, add this flag to
-  have the driver keep toggling the signal without a client. It will only cease
-  to toggle the signal when the device is open and the timeout elapsed.
-
-Example:
-	watchdog: watchdog {
-		/* ADM706 */
-		compatible = "linux,wdt-gpio";
-		gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		hw_margin_ms = <1600>;
-	};
diff --git a/dts/Bindings/watchdog/linux,wdt-gpio.yaml b/dts/Bindings/watchdog/linux,wdt-gpio.yaml
new file mode 100644
index 0000000000..50af79af64
--- /dev/null
+++ b/dts/Bindings/watchdog/linux,wdt-gpio.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/linux,wdt-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-controlled Watchdog
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    const: linux,wdt-gpio
+
+  gpios:
+    description: gpio connection to WDT reset pin
+    maxItems: 1
+
+  hw_algo:
+    description: The algorithm used by the driver.
+    enum: [ level, toggle ]
+
+  hw_margin_ms:
+    description: Maximum time to reset watchdog circuit (milliseconds).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  always-running:
+    type: boolean
+    description:
+      If the watchdog timer cannot be disabled, add this flag to have the driver
+      keep toggling the signal without a client.
+      It will only cease to toggle the signal when the device is open and the
+      timeout elapsed.
+
+required:
+  - compatible
+  - gpios
+  - hw_algo
+  - hw_margin_ms
+
+allOf:
+  - $ref: watchdog.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    watchdog {
+        compatible = "linux,wdt-gpio";
+        gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+        hw_algo = "toggle";
+        hw_margin_ms = <1600>;
+    };
diff --git a/dts/Bindings/watchdog/mediatek,mtk-wdt.yaml b/dts/Bindings/watchdog/mediatek,mtk-wdt.yaml
new file mode 100644
index 0000000000..b360560841
--- /dev/null
+++ b/dts/Bindings/watchdog/mediatek,mtk-wdt.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mediatek,mtk-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoCs Watchdog timer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The watchdog supports a pre-timeout interrupt that fires
+  timeout-sec/2 before the expiry.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2712-wdt
+          - mediatek,mt6589-wdt
+          - mediatek,mt6795-wdt
+          - mediatek,mt7986-wdt
+          - mediatek,mt8183-wdt
+          - mediatek,mt8186-wdt
+          - mediatek,mt8188-wdt
+          - mediatek,mt8192-wdt
+          - mediatek,mt8195-wdt
+      - items:
+          - enum:
+              - mediatek,mt2701-wdt
+              - mediatek,mt6582-wdt
+              - mediatek,mt6797-wdt
+              - mediatek,mt7622-wdt
+              - mediatek,mt7623-wdt
+              - mediatek,mt7629-wdt
+              - mediatek,mt8173-wdt
+              - mediatek,mt8516-wdt
+          - const: mediatek,mt6589-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Watchdog pre-timeout (bark) interrupt
+
+  mediatek,disable-extrst:
+    description: Disable sending output reset signal
+    type: boolean
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        watchdog: watchdog@10007000 {
+            compatible = "mediatek,mt8183-wdt";
+            reg = <0 0x10007000 0 0x100>;
+            interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+            mediatek,disable-extrst;
+            timeout-sec = <10>;
+            #reset-cells = <1>;
+        };
+    };
diff --git a/dts/Bindings/watchdog/mtk-wdt.txt b/dts/Bindings/watchdog/mtk-wdt.txt
deleted file mode 100644
index 762c62e428..0000000000
--- a/dts/Bindings/watchdog/mtk-wdt.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Mediatek SoCs Watchdog timer
-
-The watchdog supports a pre-timeout interrupt that fires timeout-sec/2
-before the expiry.
-
-Required properties:
-
-- compatible should contain:
-	"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
-	"mediatek,mt2712-wdt": for MT2712
-	"mediatek,mt6582-wdt", "mediatek,mt6589-wdt": for MT6582
-	"mediatek,mt6589-wdt": for MT6589
-	"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
-	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
-	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
-	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
-	"mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
-	"mediatek,mt8183-wdt": for MT8183
-	"mediatek,mt8186-wdt", "mediatek,mt6589-wdt": for MT8186
-	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
-	"mediatek,mt8192-wdt": for MT8192
-	"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
-
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-- mediatek,disable-extrst: disable send output reset signal
-- interrupts: Watchdog pre-timeout (bark) interrupt.
-- timeout-sec: contains the watchdog timeout in seconds.
-- #reset-cells: Should be 1.
-
-Example:
-
-watchdog: watchdog@10007000 {
-	compatible = "mediatek,mt8183-wdt",
-		     "mediatek,mt6589-wdt";
-	mediatek,disable-extrst;
-	reg = <0 0x10007000 0 0x100>;
-	interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
-	timeout-sec = <10>;
-	#reset-cells = <1>;
-};
diff --git a/dts/Bindings/watchdog/st,stm32-iwdg.yaml b/dts/Bindings/watchdog/st,stm32-iwdg.yaml
index 39736449ba..a8e266f80c 100644
--- a/dts/Bindings/watchdog/st,stm32-iwdg.yaml
+++ b/dts/Bindings/watchdog/st,stm32-iwdg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/st,stm32-iwdg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Independent WatchDoG (IWDG) bindings
+title: STMicroelectronics STM32 Independent WatchDoG (IWDG)
 
 maintainers:
   - Yannick Fertre <yannick.fertre@foss.st.com>
diff --git a/dts/Bindings/watchdog/watchdog.yaml b/dts/Bindings/watchdog/watchdog.yaml
index e3dfb02f0c..fccae0d001 100644
--- a/dts/Bindings/watchdog/watchdog.yaml
+++ b/dts/Bindings/watchdog/watchdog.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/watchdog.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Watchdog Generic Bindings
+title: Watchdog Common Properties
 
 maintainers:
   - Guenter Roeck <linux@roeck-us.net>
diff --git a/dts/include/dt-bindings/arm/qcom,ids.h b/dts/include/dt-bindings/arm/qcom,ids.h
new file mode 100644
index 0000000000..f7aef3f310
--- /dev/null
+++ b/dts/include/dt-bindings/arm/qcom,ids.h
@@ -0,0 +1,170 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org> based on previous work of Kumar Gala.
+ */
+#ifndef _DT_BINDINGS_ARM_QCOM_IDS_H
+#define _DT_BINDINGS_ARM_QCOM_IDS_H
+
+/*
+ * The MSM chipset and hardware revision used by Qualcomm bootloaders, DTS for
+ * older chipsets (qcom,msm-id) and in socinfo driver:
+ */
+#define QCOM_ID_MSM8960			87
+#define QCOM_ID_APQ8064			109
+#define QCOM_ID_MSM8660A		122
+#define QCOM_ID_MSM8260A		123
+#define QCOM_ID_APQ8060A		124
+#define QCOM_ID_MSM8974			126
+#define QCOM_ID_MPQ8064			130
+#define QCOM_ID_MSM8960AB		138
+#define QCOM_ID_APQ8060AB		139
+#define QCOM_ID_MSM8260AB		140
+#define QCOM_ID_MSM8660AB		141
+#define QCOM_ID_MSM8626			145
+#define QCOM_ID_MSM8610			147
+#define QCOM_ID_APQ8064AB		153
+#define QCOM_ID_MSM8226			158
+#define QCOM_ID_MSM8526			159
+#define QCOM_ID_MSM8110			161
+#define QCOM_ID_MSM8210			162
+#define QCOM_ID_MSM8810			163
+#define QCOM_ID_MSM8212			164
+#define QCOM_ID_MSM8612			165
+#define QCOM_ID_MSM8112			166
+#define QCOM_ID_MSM8225Q		168
+#define QCOM_ID_MSM8625Q		169
+#define QCOM_ID_MSM8125Q		170
+#define QCOM_ID_APQ8064AA		172
+#define QCOM_ID_APQ8084			178
+#define QCOM_ID_APQ8074			184
+#define QCOM_ID_MSM8274			185
+#define QCOM_ID_MSM8674			186
+#define QCOM_ID_MSM8974PRO_AC		194
+#define QCOM_ID_MSM8126			198
+#define QCOM_ID_APQ8026			199
+#define QCOM_ID_MSM8926			200
+#define QCOM_ID_MSM8326			205
+#define QCOM_ID_MSM8916			206
+#define QCOM_ID_MSM8994			207
+#define QCOM_ID_APQ8074PRO_AA		208
+#define QCOM_ID_APQ8074PRO_AB		209
+#define QCOM_ID_APQ8074PRO_AC		210
+#define QCOM_ID_MSM8274PRO_AA		211
+#define QCOM_ID_MSM8274PRO_AB		212
+#define QCOM_ID_MSM8274PRO_AC		213
+#define QCOM_ID_MSM8674PRO_AA		214
+#define QCOM_ID_MSM8674PRO_AB		215
+#define QCOM_ID_MSM8674PRO_AC		216
+#define QCOM_ID_MSM8974PRO_AA		217
+#define QCOM_ID_MSM8974PRO_AB		218
+#define QCOM_ID_APQ8028			219
+#define QCOM_ID_MSM8128			220
+#define QCOM_ID_MSM8228			221
+#define QCOM_ID_MSM8528			222
+#define QCOM_ID_MSM8628			223
+#define QCOM_ID_MSM8928			224
+#define QCOM_ID_MSM8510			225
+#define QCOM_ID_MSM8512			226
+#define QCOM_ID_MSM8936			233
+#define QCOM_ID_MSM8939			239
+#define QCOM_ID_APQ8036			240
+#define QCOM_ID_APQ8039			241
+#define QCOM_ID_MSM8996			246
+#define QCOM_ID_APQ8016			247
+#define QCOM_ID_MSM8216			248
+#define QCOM_ID_MSM8116			249
+#define QCOM_ID_MSM8616			250
+#define QCOM_ID_MSM8992			251
+#define QCOM_ID_APQ8094			253
+#define QCOM_ID_MSM8956			266
+#define QCOM_ID_MSM8976			278
+#define QCOM_ID_MDM9607			290
+#define QCOM_ID_APQ8096			291
+#define QCOM_ID_MSM8998			292
+#define QCOM_ID_MSM8953			293
+#define QCOM_ID_MDM8207			296
+#define QCOM_ID_MDM9207			297
+#define QCOM_ID_MDM9307			298
+#define QCOM_ID_MDM9628			299
+#define QCOM_ID_APQ8053			304
+#define QCOM_ID_MSM8996SG		305
+#define QCOM_ID_MSM8996AU		310
+#define QCOM_ID_APQ8096AU		311
+#define QCOM_ID_APQ8096SG		312
+#define QCOM_ID_SDM660			317
+#define QCOM_ID_SDM630			318
+#define QCOM_ID_APQ8098			319
+#define QCOM_ID_SDM845			321
+#define QCOM_ID_MDM9206			322
+#define QCOM_ID_IPQ8074			323
+#define QCOM_ID_SDA660			324
+#define QCOM_ID_SDM658			325
+#define QCOM_ID_SDA658			326
+#define QCOM_ID_SDA630			327
+#define QCOM_ID_SDM450			338
+#define QCOM_ID_SM8150			339
+#define QCOM_ID_SDA845			341
+#define QCOM_ID_IPQ8072			342
+#define QCOM_ID_IPQ8076			343
+#define QCOM_ID_IPQ8078			344
+#define QCOM_ID_SDM636			345
+#define QCOM_ID_SDA636			346
+#define QCOM_ID_SDM632			349
+#define QCOM_ID_SDA632			350
+#define QCOM_ID_SDA450			351
+#define QCOM_ID_SM8250			356
+#define QCOM_ID_SA8155			362
+#define QCOM_ID_IPQ8070			375
+#define QCOM_ID_IPQ8071			376
+#define QCOM_ID_IPQ8072A		389
+#define QCOM_ID_IPQ8074A		390
+#define QCOM_ID_IPQ8076A		391
+#define QCOM_ID_IPQ8078A		392
+#define QCOM_ID_SM6125			394
+#define QCOM_ID_IPQ8070A		395
+#define QCOM_ID_IPQ8071A		396
+#define QCOM_ID_IPQ6018			402
+#define QCOM_ID_IPQ6028			403
+#define QCOM_ID_SM4250			417
+#define QCOM_ID_IPQ6000			421
+#define QCOM_ID_IPQ6010			422
+#define QCOM_ID_SC7180			425
+#define QCOM_ID_SM6350			434
+#define QCOM_ID_SM8350			439
+#define QCOM_ID_SM6115			444
+#define QCOM_ID_SC8280XP		449
+#define QCOM_ID_IPQ6005			453
+#define QCOM_ID_QRB5165			455
+#define QCOM_ID_SM8450			457
+#define QCOM_ID_SM7225			459
+#define QCOM_ID_SA8295P			460
+#define QCOM_ID_SA8540P			461
+#define QCOM_ID_QCM4290			469
+#define QCOM_ID_QCS4290			470
+#define QCOM_ID_SM8450_2		480
+#define QCOM_ID_SM8450_3		482
+#define QCOM_ID_SC7280			487
+#define QCOM_ID_SC7180P			495
+#define QCOM_ID_SM6375			507
+#define QCOM_ID_SM8550			519
+#define QCOM_ID_QRU1000			539
+#define QCOM_ID_QDU1000			545
+#define QCOM_ID_QDU1010			587
+#define QCOM_ID_QRU1032			588
+#define QCOM_ID_QRU1052			589
+#define QCOM_ID_QRU1062			590
+
+/*
+ * The board type and revision information, used by Qualcomm bootloaders and
+ * DTS for older chipsets (qcom,board-id):
+ */
+#define QCOM_BOARD_ID(a, major, minor) \
+	(((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BOARD_ID_##a)
+
+#define QCOM_BOARD_ID_MTP			8
+#define QCOM_BOARD_ID_DRAGONBOARD		10
+#define QCOM_BOARD_ID_SBC			24
+
+#endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */
diff --git a/dts/include/dt-bindings/clock/imx8mn-clock.h b/dts/include/dt-bindings/clock/imx8mn-clock.h
index 07b8a282c2..04809edab3 100644
--- a/dts/include/dt-bindings/clock/imx8mn-clock.h
+++ b/dts/include/dt-bindings/clock/imx8mn-clock.h
@@ -16,40 +16,48 @@
 #define IMX8MN_CLK_EXT4				7
 #define IMX8MN_AUDIO_PLL1_REF_SEL		8
 #define IMX8MN_AUDIO_PLL2_REF_SEL		9
-#define IMX8MN_VIDEO_PLL1_REF_SEL		10
+#define IMX8MN_VIDEO_PLL_REF_SEL		10
+#define IMX8MN_VIDEO_PLL1_REF_SEL		IMX8MN_VIDEO_PLL_REF_SEL
 #define IMX8MN_DRAM_PLL_REF_SEL			11
 #define IMX8MN_GPU_PLL_REF_SEL			12
-#define IMX8MN_VPU_PLL_REF_SEL			13
+#define IMX8MN_M7_ALT_PLL_REF_SEL		13
+#define IMX8MN_VPU_PLL_REF_SEL			IMX8MN_M7_ALT_PLL_REF_SEL
 #define IMX8MN_ARM_PLL_REF_SEL			14
 #define IMX8MN_SYS_PLL1_REF_SEL			15
 #define IMX8MN_SYS_PLL2_REF_SEL			16
 #define IMX8MN_SYS_PLL3_REF_SEL			17
 #define IMX8MN_AUDIO_PLL1			18
 #define IMX8MN_AUDIO_PLL2			19
-#define IMX8MN_VIDEO_PLL1			20
+#define IMX8MN_VIDEO_PLL			20
+#define IMX8MN_VIDEO_PLL1			IMX8MN_VIDEO_PLL
 #define IMX8MN_DRAM_PLL				21
 #define IMX8MN_GPU_PLL				22
-#define IMX8MN_VPU_PLL				23
+#define IMX8MN_M7_ALT_PLL			23
+#define IMX8MN_VPU_PLL				IMX8MN_M7_ALT_PLL
 #define IMX8MN_ARM_PLL				24
 #define IMX8MN_SYS_PLL1				25
 #define IMX8MN_SYS_PLL2				26
 #define IMX8MN_SYS_PLL3				27
 #define IMX8MN_AUDIO_PLL1_BYPASS		28
 #define IMX8MN_AUDIO_PLL2_BYPASS		29
-#define IMX8MN_VIDEO_PLL1_BYPASS		30
+#define IMX8MN_VIDEO_PLL_BYPASS			30
+#define IMX8MN_VIDEO_PLL1_BYPASS		IMX8MN_VIDEO_PLL_BYPASS
 #define IMX8MN_DRAM_PLL_BYPASS			31
 #define IMX8MN_GPU_PLL_BYPASS			32
-#define IMX8MN_VPU_PLL_BYPASS			33
+#define IMX8MN_M7_ALT_PLL_BYPASS		33
+#define IMX8MN_VPU_PLL_BYPASS			IMX8MN_M7_ALT_PLL_BYPASS
 #define IMX8MN_ARM_PLL_BYPASS			34
 #define IMX8MN_SYS_PLL1_BYPASS			35
 #define IMX8MN_SYS_PLL2_BYPASS			36
 #define IMX8MN_SYS_PLL3_BYPASS			37
 #define IMX8MN_AUDIO_PLL1_OUT			38
 #define IMX8MN_AUDIO_PLL2_OUT			39
-#define IMX8MN_VIDEO_PLL1_OUT			40
+#define IMX8MN_VIDEO_PLL_OUT			40
+#define IMX8MN_VIDEO_PLL1_OUT			IMX8MN_VIDEO_PLL_OUT
 #define IMX8MN_DRAM_PLL_OUT			41
 #define IMX8MN_GPU_PLL_OUT			42
-#define IMX8MN_VPU_PLL_OUT			43
+#define IMX8MN_M7_ALT_PLL_OUT			43
+#define IMX8MN_VPU_PLL_OUT			IMX8MN_M7_ALT_PLL_OUT
 #define IMX8MN_ARM_PLL_OUT			44
 #define IMX8MN_SYS_PLL1_OUT			45
 #define IMX8MN_SYS_PLL2_OUT			46
diff --git a/dts/include/dt-bindings/clock/imx8mp-clock.h b/dts/include/dt-bindings/clock/imx8mp-clock.h
index 9d5cc2ddde..ede1f65a31 100644
--- a/dts/include/dt-bindings/clock/imx8mp-clock.h
+++ b/dts/include/dt-bindings/clock/imx8mp-clock.h
@@ -324,8 +324,18 @@
 #define IMX8MP_CLK_CLKOUT2_SEL			317
 #define IMX8MP_CLK_CLKOUT2_DIV			318
 #define IMX8MP_CLK_CLKOUT2			319
+#define IMX8MP_CLK_USB_SUSP			320
+#define IMX8MP_CLK_AUDIO_AHB_ROOT		IMX8MP_CLK_AUDIO_ROOT
+#define IMX8MP_CLK_AUDIO_AXI_ROOT		321
+#define IMX8MP_CLK_SAI1_ROOT			322
+#define IMX8MP_CLK_SAI2_ROOT			323
+#define IMX8MP_CLK_SAI3_ROOT			324
+#define IMX8MP_CLK_SAI5_ROOT			325
+#define IMX8MP_CLK_SAI6_ROOT			326
+#define IMX8MP_CLK_SAI7_ROOT			327
+#define IMX8MP_CLK_PDM_ROOT			328
 
-#define IMX8MP_CLK_END				320
+#define IMX8MP_CLK_END				329
 
 #define IMX8MP_CLK_AUDIOMIX_SAI1_IPG		0
 #define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1		1
diff --git a/dts/include/dt-bindings/clock/imx93-clock.h b/dts/include/dt-bindings/clock/imx93-clock.h
index 19bc32788d..8e02859d8c 100644
--- a/dts/include/dt-bindings/clock/imx93-clock.h
+++ b/dts/include/dt-bindings/clock/imx93-clock.h
@@ -28,13 +28,9 @@
 #define IMX93_CLK_M33_SYSTICK		19
 #define IMX93_CLK_FLEXIO1		20
 #define IMX93_CLK_FLEXIO2		21
-#define IMX93_CLK_LPIT1			22
-#define IMX93_CLK_LPIT2			23
 #define IMX93_CLK_LPTMR1		24
 #define IMX93_CLK_LPTMR2		25
-#define IMX93_CLK_TPM1			26
 #define IMX93_CLK_TPM2			27
-#define IMX93_CLK_TPM3			28
 #define IMX93_CLK_TPM4			29
 #define IMX93_CLK_TPM5			30
 #define IMX93_CLK_TPM6			31
diff --git a/dts/include/dt-bindings/clock/ingenic,jz4755-cgu.h b/dts/include/dt-bindings/clock/ingenic,jz4755-cgu.h
new file mode 100644
index 0000000000..10098494e7
--- /dev/null
+++ b/dts/include/dt-bindings/clock/ingenic,jz4755-cgu.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * This header provides clock numbers for the ingenic,jz4755-cgu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_JZ4755_CGU_H__
+#define __DT_BINDINGS_CLOCK_JZ4755_CGU_H__
+
+#define JZ4755_CLK_EXT		0
+#define JZ4755_CLK_OSC32K	1
+#define JZ4755_CLK_PLL		2
+#define JZ4755_CLK_PLL_HALF	3
+#define JZ4755_CLK_EXT_HALF	4
+#define JZ4755_CLK_CCLK		5
+#define JZ4755_CLK_H0CLK	6
+#define JZ4755_CLK_PCLK		7
+#define JZ4755_CLK_MCLK		8
+#define JZ4755_CLK_H1CLK	9
+#define JZ4755_CLK_UDC		10
+#define JZ4755_CLK_LCD		11
+#define JZ4755_CLK_UART0	12
+#define JZ4755_CLK_UART1	13
+#define JZ4755_CLK_UART2	14
+#define JZ4755_CLK_DMA		15
+#define JZ4755_CLK_MMC		16
+#define JZ4755_CLK_MMC0		17
+#define JZ4755_CLK_MMC1		18
+#define JZ4755_CLK_EXT512	19
+#define JZ4755_CLK_RTC		20
+#define JZ4755_CLK_UDC_PHY	21
+#define JZ4755_CLK_I2S		22
+#define JZ4755_CLK_SPI		23
+#define JZ4755_CLK_AIC		24
+#define JZ4755_CLK_ADC		25
+#define JZ4755_CLK_TCU		26
+#define JZ4755_CLK_BCH		27
+#define JZ4755_CLK_I2C		28
+#define JZ4755_CLK_TVE		29
+#define JZ4755_CLK_CIM		30
+#define JZ4755_CLK_AUX_CPU	31
+#define JZ4755_CLK_AHB1		32
+#define JZ4755_CLK_IDCT		33
+#define JZ4755_CLK_DB		34
+#define JZ4755_CLK_ME		35
+#define JZ4755_CLK_MC		36
+#define JZ4755_CLK_TSSI		37
+#define JZ4755_CLK_IPU		38
+
+#endif /* __DT_BINDINGS_CLOCK_JZ4755_CGU_H__ */
diff --git a/dts/include/dt-bindings/clock/ingenic,x1000-cgu.h b/dts/include/dt-bindings/clock/ingenic,x1000-cgu.h
index f187e0719f..78daf44b35 100644
--- a/dts/include/dt-bindings/clock/ingenic,x1000-cgu.h
+++ b/dts/include/dt-bindings/clock/ingenic,x1000-cgu.h
@@ -50,5 +50,9 @@
 #define X1000_CLK_PDMA			35
 #define X1000_CLK_EXCLK_DIV512	36
 #define X1000_CLK_RTC			37
+#define X1000_CLK_AIC			38
+#define X1000_CLK_I2SPLLMUX		39
+#define X1000_CLK_I2SPLL		40
+#define X1000_CLK_I2S			41
 
 #endif /* __DT_BINDINGS_CLOCK_X1000_CGU_H__ */
diff --git a/dts/include/dt-bindings/clock/qcom,dispcc-sc8280xp.h b/dts/include/dt-bindings/clock/qcom,dispcc-sc8280xp.h
new file mode 100644
index 0000000000..2831c61fa9
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,dispcc-sc8280xp.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SC8280XP_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SC8280XP_H
+
+/* DISPCC clocks */
+#define DISP_CC_PLL0					0
+#define DISP_CC_PLL1					1
+#define DISP_CC_PLL1_OUT_EVEN				2
+#define DISP_CC_PLL2					3
+#define DISP_CC_MDSS_AHB1_CLK				4
+#define DISP_CC_MDSS_AHB_CLK				5
+#define DISP_CC_MDSS_AHB_CLK_SRC			6
+#define DISP_CC_MDSS_BYTE0_CLK				7
+#define DISP_CC_MDSS_BYTE0_CLK_SRC			8
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC			9
+#define DISP_CC_MDSS_BYTE0_INTF_CLK			10
+#define DISP_CC_MDSS_BYTE1_CLK				11
+#define DISP_CC_MDSS_BYTE1_CLK_SRC			12
+#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC			13
+#define DISP_CC_MDSS_BYTE1_INTF_CLK			14
+#define DISP_CC_MDSS_DPTX0_AUX_CLK			15
+#define DISP_CC_MDSS_DPTX0_AUX_CLK_SRC			16
+#define DISP_CC_MDSS_DPTX0_LINK_CLK			17
+#define DISP_CC_MDSS_DPTX0_LINK_CLK_SRC			18
+#define DISP_CC_MDSS_DPTX0_LINK_DIV_CLK_SRC		19
+#define DISP_CC_MDSS_DPTX0_LINK_INTF_CLK		20
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK			21
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC		22
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK			23
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC		24
+#define DISP_CC_MDSS_DPTX0_USB_ROUTER_LINK_INTF_CLK	25
+#define DISP_CC_MDSS_DPTX1_AUX_CLK			26
+#define DISP_CC_MDSS_DPTX1_AUX_CLK_SRC			27
+#define DISP_CC_MDSS_DPTX1_LINK_CLK			28
+#define DISP_CC_MDSS_DPTX1_LINK_CLK_SRC			29
+#define DISP_CC_MDSS_DPTX1_LINK_DIV_CLK_SRC		30
+#define DISP_CC_MDSS_DPTX1_LINK_INTF_CLK		31
+#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK			32
+#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC		33
+#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK			34
+#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC		35
+#define DISP_CC_MDSS_DPTX1_USB_ROUTER_LINK_INTF_CLK	36
+#define DISP_CC_MDSS_DPTX2_AUX_CLK			37
+#define DISP_CC_MDSS_DPTX2_AUX_CLK_SRC			38
+#define DISP_CC_MDSS_DPTX2_LINK_CLK			39
+#define DISP_CC_MDSS_DPTX2_LINK_CLK_SRC			40
+#define DISP_CC_MDSS_DPTX2_LINK_DIV_CLK_SRC		41
+#define DISP_CC_MDSS_DPTX2_LINK_INTF_CLK		42
+#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK			43
+#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC		44
+#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK			45
+#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC		46
+#define DISP_CC_MDSS_DPTX3_AUX_CLK			47
+#define DISP_CC_MDSS_DPTX3_AUX_CLK_SRC			48
+#define DISP_CC_MDSS_DPTX3_LINK_CLK			49
+#define DISP_CC_MDSS_DPTX3_LINK_CLK_SRC			50
+#define DISP_CC_MDSS_DPTX3_LINK_DIV_CLK_SRC		51
+#define DISP_CC_MDSS_DPTX3_LINK_INTF_CLK		52
+#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK			53
+#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC		54
+#define DISP_CC_MDSS_ESC0_CLK				55
+#define DISP_CC_MDSS_ESC0_CLK_SRC			56
+#define DISP_CC_MDSS_ESC1_CLK				57
+#define DISP_CC_MDSS_ESC1_CLK_SRC			58
+#define DISP_CC_MDSS_MDP1_CLK				59
+#define DISP_CC_MDSS_MDP_CLK				60
+#define DISP_CC_MDSS_MDP_CLK_SRC			61
+#define DISP_CC_MDSS_MDP_LUT1_CLK			62
+#define DISP_CC_MDSS_MDP_LUT_CLK			63
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK			64
+#define DISP_CC_MDSS_PCLK0_CLK				65
+#define DISP_CC_MDSS_PCLK0_CLK_SRC			66
+#define DISP_CC_MDSS_PCLK1_CLK				67
+#define DISP_CC_MDSS_PCLK1_CLK_SRC			68
+#define DISP_CC_MDSS_ROT1_CLK				69
+#define DISP_CC_MDSS_ROT_CLK				70
+#define DISP_CC_MDSS_ROT_CLK_SRC			71
+#define DISP_CC_MDSS_RSCC_AHB_CLK			72
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK			73
+#define DISP_CC_MDSS_VSYNC1_CLK				74
+#define DISP_CC_MDSS_VSYNC_CLK				75
+#define DISP_CC_MDSS_VSYNC_CLK_SRC			76
+#define DISP_CC_SLEEP_CLK				77
+#define DISP_CC_SLEEP_CLK_SRC				78
+#define DISP_CC_XO_CLK					79
+#define DISP_CC_XO_CLK_SRC				80
+
+/* DISPCC resets */
+#define DISP_CC_MDSS_CORE_BCR				0
+#define DISP_CC_MDSS_RSCC_BCR				1
+
+/* DISPCC GDSCs */
+#define MDSS_GDSC					0
+#define MDSS_INT2_GDSC					1
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,dispcc-sm8150.h b/dts/include/dt-bindings/clock/qcom,dispcc-sm8150.h
index ce001cbbc2..767fdb27e5 100644
--- a/dts/include/dt-bindings/clock/qcom,dispcc-sm8150.h
+++ b/dts/include/dt-bindings/clock/qcom,dispcc-sm8150.h
@@ -64,6 +64,7 @@
 #define DISP_CC_MDSS_EDP_LINK_INTF_CLK		54
 #define DISP_CC_MDSS_EDP_PIXEL_CLK		55
 #define DISP_CC_MDSS_EDP_PIXEL_CLK_SRC		56
+#define DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC	57
 
 /* DISP_CC Reset */
 #define DISP_CC_MDSS_CORE_BCR			0
diff --git a/dts/include/dt-bindings/clock/qcom,dispcc-sm8250.h b/dts/include/dt-bindings/clock/qcom,dispcc-sm8250.h
index ce001cbbc2..767fdb27e5 100644
--- a/dts/include/dt-bindings/clock/qcom,dispcc-sm8250.h
+++ b/dts/include/dt-bindings/clock/qcom,dispcc-sm8250.h
@@ -64,6 +64,7 @@
 #define DISP_CC_MDSS_EDP_LINK_INTF_CLK		54
 #define DISP_CC_MDSS_EDP_PIXEL_CLK		55
 #define DISP_CC_MDSS_EDP_PIXEL_CLK_SRC		56
+#define DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC	57
 
 /* DISP_CC Reset */
 #define DISP_CC_MDSS_CORE_BCR			0
diff --git a/dts/include/dt-bindings/clock/qcom,dispcc-sm8350.h b/dts/include/dt-bindings/clock/qcom,dispcc-sm8350.h
index ce001cbbc2..767fdb27e5 100644
--- a/dts/include/dt-bindings/clock/qcom,dispcc-sm8350.h
+++ b/dts/include/dt-bindings/clock/qcom,dispcc-sm8350.h
@@ -64,6 +64,7 @@
 #define DISP_CC_MDSS_EDP_LINK_INTF_CLK		54
 #define DISP_CC_MDSS_EDP_PIXEL_CLK		55
 #define DISP_CC_MDSS_EDP_PIXEL_CLK_SRC		56
+#define DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC	57
 
 /* DISP_CC Reset */
 #define DISP_CC_MDSS_CORE_BCR			0
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-ipq8074.h b/dts/include/dt-bindings/clock/qcom,gcc-ipq8074.h
index e4991d3037..f9ea558111 100644
--- a/dts/include/dt-bindings/clock/qcom,gcc-ipq8074.h
+++ b/dts/include/dt-bindings/clock/qcom,gcc-ipq8074.h
@@ -367,6 +367,20 @@
 #define GCC_PCIE1_AHB_ARES			129
 #define GCC_PCIE1_AXI_MASTER_STICKY_ARES	130
 #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES		131
+#define GCC_PPE_FULL_RESET			132
+#define GCC_UNIPHY0_SOFT_RESET			133
+#define GCC_UNIPHY0_XPCS_RESET			134
+#define GCC_UNIPHY1_SOFT_RESET			135
+#define GCC_UNIPHY1_XPCS_RESET			136
+#define GCC_UNIPHY2_SOFT_RESET			137
+#define GCC_UNIPHY2_XPCS_RESET			138
+#define GCC_EDMA_HW_RESET			139
+#define GCC_NSSPORT1_RESET			140
+#define GCC_NSSPORT2_RESET			141
+#define GCC_NSSPORT3_RESET			142
+#define GCC_NSSPORT4_RESET			143
+#define GCC_NSSPORT5_RESET			144
+#define GCC_NSSPORT6_RESET			145
 
 #define USB0_GDSC				0
 #define USB1_GDSC				1
diff --git a/dts/include/dt-bindings/clock/qcom,sm6375-dispcc.h b/dts/include/dt-bindings/clock/qcom,sm6375-dispcc.h
new file mode 100644
index 0000000000..1cb0bed004
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,sm6375-dispcc.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6375_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6375_H
+
+/* Clocks */
+#define DISP_CC_PLL0					0
+#define DISP_CC_MDSS_AHB_CLK				1
+#define DISP_CC_MDSS_AHB_CLK_SRC			2
+#define DISP_CC_MDSS_BYTE0_CLK				3
+#define DISP_CC_MDSS_BYTE0_CLK_SRC			4
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC			5
+#define DISP_CC_MDSS_BYTE0_INTF_CLK			6
+#define DISP_CC_MDSS_ESC0_CLK				7
+#define DISP_CC_MDSS_ESC0_CLK_SRC			8
+#define DISP_CC_MDSS_MDP_CLK				9
+#define DISP_CC_MDSS_MDP_CLK_SRC			10
+#define DISP_CC_MDSS_MDP_LUT_CLK			11
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK			12
+#define DISP_CC_MDSS_PCLK0_CLK				13
+#define DISP_CC_MDSS_PCLK0_CLK_SRC			14
+#define DISP_CC_MDSS_ROT_CLK				15
+#define DISP_CC_MDSS_ROT_CLK_SRC			16
+#define DISP_CC_MDSS_RSCC_AHB_CLK			17
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK			18
+#define DISP_CC_MDSS_VSYNC_CLK				19
+#define DISP_CC_MDSS_VSYNC_CLK_SRC			20
+#define DISP_CC_SLEEP_CLK				21
+#define DISP_CC_XO_CLK					22
+
+/* Resets */
+#define DISP_CC_MDSS_CORE_BCR				0
+#define DISP_CC_MDSS_RSCC_BCR				1
+
+/* GDSCs */
+#define MDSS_GDSC					0
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,sm8550-gcc.h b/dts/include/dt-bindings/clock/qcom,sm8550-gcc.h
new file mode 100644
index 0000000000..3bf6f2b75c
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,sm8550-gcc.h
@@ -0,0 +1,231 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8550_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SM8550_H
+
+/* GCC clocks */
+#define GCC_AGGRE_NOC_PCIE_AXI_CLK				0
+#define GCC_AGGRE_UFS_PHY_AXI_CLK				1
+#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK			2
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK				3
+#define GCC_AHB2PHY_0_CLK					4
+#define GCC_BOOT_ROM_AHB_CLK					5
+#define GCC_CAMERA_AHB_CLK					6
+#define GCC_CAMERA_HF_AXI_CLK					7
+#define GCC_CAMERA_SF_AXI_CLK					8
+#define GCC_CAMERA_XO_CLK					9
+#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK				10
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK				11
+#define GCC_CNOC_PCIE_SF_AXI_CLK				12
+#define GCC_DDRSS_GPU_AXI_CLK					13
+#define GCC_DDRSS_PCIE_SF_QTB_CLK				14
+#define GCC_DISP_AHB_CLK					15
+#define GCC_DISP_HF_AXI_CLK					16
+#define GCC_DISP_XO_CLK						17
+#define GCC_GP1_CLK						18
+#define GCC_GP1_CLK_SRC						19
+#define GCC_GP2_CLK						20
+#define GCC_GP2_CLK_SRC						21
+#define GCC_GP3_CLK						22
+#define GCC_GP3_CLK_SRC						23
+#define GCC_GPLL0						24
+#define GCC_GPLL0_OUT_EVEN					25
+#define GCC_GPLL4						26
+#define GCC_GPLL7						27
+#define GCC_GPLL9						28
+#define GCC_GPU_CFG_AHB_CLK					29
+#define GCC_GPU_GPLL0_CLK_SRC					30
+#define GCC_GPU_GPLL0_DIV_CLK_SRC				31
+#define GCC_GPU_MEMNOC_GFX_CLK					32
+#define GCC_GPU_SNOC_DVM_GFX_CLK				33
+#define GCC_PCIE_0_AUX_CLK					34
+#define GCC_PCIE_0_AUX_CLK_SRC					35
+#define GCC_PCIE_0_CFG_AHB_CLK					36
+#define GCC_PCIE_0_MSTR_AXI_CLK					37
+#define GCC_PCIE_0_PHY_RCHNG_CLK				38
+#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC				39
+#define GCC_PCIE_0_PIPE_CLK					40
+#define GCC_PCIE_0_PIPE_CLK_SRC					41
+#define GCC_PCIE_0_SLV_AXI_CLK					42
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK				43
+#define GCC_PCIE_1_AUX_CLK					44
+#define GCC_PCIE_1_AUX_CLK_SRC					45
+#define GCC_PCIE_1_CFG_AHB_CLK					46
+#define GCC_PCIE_1_MSTR_AXI_CLK					47
+#define GCC_PCIE_1_PHY_AUX_CLK					48
+#define GCC_PCIE_1_PHY_AUX_CLK_SRC				49
+#define GCC_PCIE_1_PHY_RCHNG_CLK				50
+#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC				51
+#define GCC_PCIE_1_PIPE_CLK					52
+#define GCC_PCIE_1_PIPE_CLK_SRC					53
+#define GCC_PCIE_1_SLV_AXI_CLK					54
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK				55
+#define GCC_PDM2_CLK						56
+#define GCC_PDM2_CLK_SRC					57
+#define GCC_PDM_AHB_CLK						58
+#define GCC_PDM_XO4_CLK						59
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK				60
+#define GCC_QMIP_CAMERA_RT_AHB_CLK				61
+#define GCC_QMIP_DISP_AHB_CLK					62
+#define GCC_QMIP_GPU_AHB_CLK					63
+#define GCC_QMIP_PCIE_AHB_CLK					64
+#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK				65
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK				66
+#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK				67
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK				68
+#define GCC_QUPV3_I2C_CORE_CLK					69
+#define GCC_QUPV3_I2C_S0_CLK					70
+#define GCC_QUPV3_I2C_S0_CLK_SRC				71
+#define GCC_QUPV3_I2C_S1_CLK					72
+#define GCC_QUPV3_I2C_S1_CLK_SRC				73
+#define GCC_QUPV3_I2C_S2_CLK					74
+#define GCC_QUPV3_I2C_S2_CLK_SRC				75
+#define GCC_QUPV3_I2C_S3_CLK					76
+#define GCC_QUPV3_I2C_S3_CLK_SRC				77
+#define GCC_QUPV3_I2C_S4_CLK					78
+#define GCC_QUPV3_I2C_S4_CLK_SRC				79
+#define GCC_QUPV3_I2C_S5_CLK					80
+#define GCC_QUPV3_I2C_S5_CLK_SRC				81
+#define GCC_QUPV3_I2C_S6_CLK					82
+#define GCC_QUPV3_I2C_S6_CLK_SRC				83
+#define GCC_QUPV3_I2C_S7_CLK					84
+#define GCC_QUPV3_I2C_S7_CLK_SRC				85
+#define GCC_QUPV3_I2C_S8_CLK					86
+#define GCC_QUPV3_I2C_S8_CLK_SRC				87
+#define GCC_QUPV3_I2C_S9_CLK					88
+#define GCC_QUPV3_I2C_S9_CLK_SRC				89
+#define GCC_QUPV3_I2C_S_AHB_CLK					90
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK				91
+#define GCC_QUPV3_WRAP1_CORE_CLK				92
+#define GCC_QUPV3_WRAP1_S0_CLK					93
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC				94
+#define GCC_QUPV3_WRAP1_S1_CLK					95
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC				96
+#define GCC_QUPV3_WRAP1_S2_CLK					97
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC				98
+#define GCC_QUPV3_WRAP1_S3_CLK					99
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC				100
+#define GCC_QUPV3_WRAP1_S4_CLK					101
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC				102
+#define GCC_QUPV3_WRAP1_S5_CLK					103
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC				104
+#define GCC_QUPV3_WRAP1_S6_CLK					105
+#define GCC_QUPV3_WRAP1_S6_CLK_SRC				106
+#define GCC_QUPV3_WRAP1_S7_CLK					107
+#define GCC_QUPV3_WRAP1_S7_CLK_SRC				108
+#define GCC_QUPV3_WRAP2_CORE_2X_CLK				109
+#define GCC_QUPV3_WRAP2_CORE_CLK				110
+#define GCC_QUPV3_WRAP2_S0_CLK					111
+#define GCC_QUPV3_WRAP2_S0_CLK_SRC				112
+#define GCC_QUPV3_WRAP2_S1_CLK					113
+#define GCC_QUPV3_WRAP2_S1_CLK_SRC				114
+#define GCC_QUPV3_WRAP2_S2_CLK					115
+#define GCC_QUPV3_WRAP2_S2_CLK_SRC				116
+#define GCC_QUPV3_WRAP2_S3_CLK					117
+#define GCC_QUPV3_WRAP2_S3_CLK_SRC				118
+#define GCC_QUPV3_WRAP2_S4_CLK					119
+#define GCC_QUPV3_WRAP2_S4_CLK_SRC				120
+#define GCC_QUPV3_WRAP2_S5_CLK					121
+#define GCC_QUPV3_WRAP2_S5_CLK_SRC				122
+#define GCC_QUPV3_WRAP2_S6_CLK					123
+#define GCC_QUPV3_WRAP2_S6_CLK_SRC				124
+#define GCC_QUPV3_WRAP2_S7_CLK					125
+#define GCC_QUPV3_WRAP2_S7_CLK_SRC				126
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK				127
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK				128
+#define GCC_QUPV3_WRAP_2_M_AHB_CLK				129
+#define GCC_QUPV3_WRAP_2_S_AHB_CLK				130
+#define GCC_SDCC2_AHB_CLK					131
+#define GCC_SDCC2_APPS_CLK					132
+#define GCC_SDCC2_APPS_CLK_SRC					133
+#define GCC_SDCC4_AHB_CLK					134
+#define GCC_SDCC4_APPS_CLK					135
+#define GCC_SDCC4_APPS_CLK_SRC					136
+#define GCC_UFS_PHY_AHB_CLK					137
+#define GCC_UFS_PHY_AXI_CLK					138
+#define GCC_UFS_PHY_AXI_CLK_SRC					139
+#define GCC_UFS_PHY_AXI_HW_CTL_CLK				140
+#define GCC_UFS_PHY_ICE_CORE_CLK				141
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC				142
+#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK				143
+#define GCC_UFS_PHY_PHY_AUX_CLK					144
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC				145
+#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK				146
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK				147
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC				148
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK				149
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC				150
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK				151
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC				152
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK				153
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC				154
+#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK			155
+#define GCC_USB30_PRIM_MASTER_CLK				156
+#define GCC_USB30_PRIM_MASTER_CLK_SRC				157
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK				158
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC			159
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC		160
+#define GCC_USB30_PRIM_SLEEP_CLK				161
+#define GCC_USB3_PRIM_PHY_AUX_CLK				162
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC				163
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK				164
+#define GCC_USB3_PRIM_PHY_PIPE_CLK				165
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC				166
+#define GCC_VIDEO_AHB_CLK					167
+#define GCC_VIDEO_AXI0_CLK					168
+#define GCC_VIDEO_AXI1_CLK					169
+#define GCC_VIDEO_XO_CLK					170
+
+/* GCC resets */
+#define GCC_CAMERA_BCR						0
+#define GCC_DISPLAY_BCR						1
+#define GCC_GPU_BCR						2
+#define GCC_PCIE_0_BCR						3
+#define GCC_PCIE_0_LINK_DOWN_BCR				4
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR				5
+#define GCC_PCIE_0_PHY_BCR					6
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR			7
+#define GCC_PCIE_1_BCR						8
+#define GCC_PCIE_1_LINK_DOWN_BCR				9
+#define GCC_PCIE_1_NOCSR_COM_PHY_BCR				10
+#define GCC_PCIE_1_PHY_BCR					11
+#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR			12
+#define GCC_PCIE_PHY_BCR					13
+#define GCC_PCIE_PHY_CFG_AHB_BCR				14
+#define GCC_PCIE_PHY_COM_BCR					15
+#define GCC_PDM_BCR						16
+#define GCC_QUPV3_WRAPPER_1_BCR					17
+#define GCC_QUPV3_WRAPPER_2_BCR					18
+#define GCC_QUPV3_WRAPPER_I2C_BCR				19
+#define GCC_QUSB2PHY_PRIM_BCR					20
+#define GCC_QUSB2PHY_SEC_BCR					21
+#define GCC_SDCC2_BCR						22
+#define GCC_SDCC4_BCR						23
+#define GCC_UFS_PHY_BCR						24
+#define GCC_USB30_PRIM_BCR					25
+#define GCC_USB3_DP_PHY_PRIM_BCR				26
+#define GCC_USB3_DP_PHY_SEC_BCR					27
+#define GCC_USB3_PHY_PRIM_BCR					28
+#define GCC_USB3_PHY_SEC_BCR					29
+#define GCC_USB3PHY_PHY_PRIM_BCR				30
+#define GCC_USB3PHY_PHY_SEC_BCR					31
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR				32
+#define GCC_VIDEO_AXI0_CLK_ARES					33
+#define GCC_VIDEO_AXI1_CLK_ARES					34
+#define GCC_VIDEO_BCR						35
+
+/* GCC power domains */
+#define PCIE_0_GDSC						0
+#define PCIE_0_PHY_GDSC						1
+#define PCIE_1_GDSC						2
+#define PCIE_1_PHY_GDSC						3
+#define UFS_PHY_GDSC						4
+#define UFS_MEM_PHY_GDSC					5
+#define USB30_PRIM_GDSC						6
+#define USB3_PHY_GDSC						7
+
+#endif
diff --git a/dts/include/dt-bindings/clock/rk3399-cru.h b/dts/include/dt-bindings/clock/rk3399-cru.h
index 44e0a319f0..39169d94a4 100644
--- a/dts/include/dt-bindings/clock/rk3399-cru.h
+++ b/dts/include/dt-bindings/clock/rk3399-cru.h
@@ -547,8 +547,8 @@
 #define SRST_H_PERILP0			171
 #define SRST_H_PERILP0_NOC		172
 #define SRST_ROM			173
-#define SRST_CRYPTO_S			174
-#define SRST_CRYPTO_M			175
+#define SRST_CRYPTO0_S			174
+#define SRST_CRYPTO0_M			175
 
 /* cru_softrst_con11 */
 #define SRST_P_DCF			176
@@ -556,7 +556,7 @@
 #define SRST_CM0S			178
 #define SRST_CM0S_DBG			179
 #define SRST_CM0S_PO			180
-#define SRST_CRYPTO			181
+#define SRST_CRYPTO0			181
 #define SRST_P_PERILP1_SGRF		182
 #define SRST_P_PERILP1_GRF		183
 #define SRST_CRYPTO1_S			184
diff --git a/dts/include/dt-bindings/clock/rockchip,rk3588-cru.h b/dts/include/dt-bindings/clock/rockchip,rk3588-cru.h
new file mode 100644
index 0000000000..b5616bca7b
--- /dev/null
+++ b/dts/include/dt-bindings/clock/rockchip,rk3588-cru.h
@@ -0,0 +1,766 @@
+/* SPDX-License-Identifier: (GPL-2.0 or MIT) */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
+ * Copyright (c) 2022 Collabora Ltd.
+ *
+ * Author: Elaine Zhang <zhangqing@rock-chips.com>
+ * Author: Sebastian Reichel <sebastian.reichel@collabora.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3588_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3588_H
+
+/* cru-clocks indices */
+
+#define PLL_B0PLL			0
+#define PLL_B1PLL			1
+#define PLL_LPLL			2
+#define PLL_V0PLL			3
+#define PLL_AUPLL			4
+#define PLL_CPLL			5
+#define PLL_GPLL			6
+#define PLL_NPLL			7
+#define PLL_PPLL			8
+#define ARMCLK_L			9
+#define ARMCLK_B01			10
+#define ARMCLK_B23			11
+#define PCLK_BIGCORE0_ROOT		12
+#define PCLK_BIGCORE0_PVTM		13
+#define PCLK_BIGCORE1_ROOT		14
+#define PCLK_BIGCORE1_PVTM		15
+#define PCLK_DSU_S_ROOT			16
+#define PCLK_DSU_ROOT			17
+#define PCLK_DSU_NS_ROOT		18
+#define PCLK_LITCORE_PVTM		19
+#define PCLK_DBG			20
+#define PCLK_DSU			21
+#define PCLK_S_DAPLITE			22
+#define PCLK_M_DAPLITE			23
+#define MBIST_MCLK_PDM1			24
+#define MBIST_CLK_ACDCDIG		25
+#define HCLK_I2S2_2CH			26
+#define HCLK_I2S3_2CH			27
+#define CLK_I2S2_2CH_SRC		28
+#define CLK_I2S2_2CH_FRAC		29
+#define CLK_I2S2_2CH			30
+#define MCLK_I2S2_2CH			31
+#define I2S2_2CH_MCLKOUT		32
+#define CLK_DAC_ACDCDIG			33
+#define CLK_I2S3_2CH_SRC		34
+#define CLK_I2S3_2CH_FRAC		35
+#define CLK_I2S3_2CH			36
+#define MCLK_I2S3_2CH			37
+#define I2S3_2CH_MCLKOUT		38
+#define PCLK_ACDCDIG			39
+#define HCLK_I2S0_8CH			40
+#define CLK_I2S0_8CH_TX_SRC		41
+#define CLK_I2S0_8CH_TX_FRAC		42
+#define MCLK_I2S0_8CH_TX		43
+#define CLK_I2S0_8CH_TX			44
+#define CLK_I2S0_8CH_RX_SRC		45
+#define CLK_I2S0_8CH_RX_FRAC		46
+#define MCLK_I2S0_8CH_RX		47
+#define CLK_I2S0_8CH_RX			48
+#define I2S0_8CH_MCLKOUT		49
+#define HCLK_PDM1			50
+#define MCLK_PDM1			51
+#define HCLK_AUDIO_ROOT			52
+#define PCLK_AUDIO_ROOT			53
+#define HCLK_SPDIF0			54
+#define CLK_SPDIF0_SRC			55
+#define CLK_SPDIF0_FRAC			56
+#define MCLK_SPDIF0			57
+#define CLK_SPDIF0			58
+#define CLK_SPDIF1			59
+#define HCLK_SPDIF1			60
+#define CLK_SPDIF1_SRC			61
+#define CLK_SPDIF1_FRAC			62
+#define MCLK_SPDIF1			63
+#define ACLK_AV1_ROOT			64
+#define ACLK_AV1			65
+#define PCLK_AV1_ROOT			66
+#define PCLK_AV1			67
+#define PCLK_MAILBOX0			68
+#define PCLK_MAILBOX1			69
+#define PCLK_MAILBOX2			70
+#define PCLK_PMU2			71
+#define PCLK_PMUCM0_INTMUX		72
+#define PCLK_DDRCM0_INTMUX		73
+#define PCLK_TOP			74
+#define PCLK_PWM1			75
+#define CLK_PWM1			76
+#define CLK_PWM1_CAPTURE		77
+#define PCLK_PWM2			78
+#define CLK_PWM2			79
+#define CLK_PWM2_CAPTURE		80
+#define PCLK_PWM3			81
+#define CLK_PWM3			82
+#define CLK_PWM3_CAPTURE		83
+#define PCLK_BUSTIMER0			84
+#define PCLK_BUSTIMER1			85
+#define CLK_BUS_TIMER_ROOT		86
+#define CLK_BUSTIMER0			87
+#define CLK_BUSTIMER1			88
+#define CLK_BUSTIMER2			89
+#define CLK_BUSTIMER3			90
+#define CLK_BUSTIMER4			91
+#define CLK_BUSTIMER5			92
+#define CLK_BUSTIMER6			93
+#define CLK_BUSTIMER7			94
+#define CLK_BUSTIMER8			95
+#define CLK_BUSTIMER9			96
+#define CLK_BUSTIMER10			97
+#define CLK_BUSTIMER11			98
+#define PCLK_WDT0			99
+#define TCLK_WDT0			100
+#define PCLK_CAN0			101
+#define CLK_CAN0			102
+#define PCLK_CAN1			103
+#define CLK_CAN1			104
+#define PCLK_CAN2			105
+#define CLK_CAN2			106
+#define ACLK_DECOM			107
+#define PCLK_DECOM			108
+#define DCLK_DECOM			109
+#define ACLK_DMAC0			110
+#define ACLK_DMAC1			111
+#define ACLK_DMAC2			112
+#define ACLK_BUS_ROOT			113
+#define ACLK_GIC			114
+#define PCLK_GPIO1			115
+#define DBCLK_GPIO1			116
+#define PCLK_GPIO2			117
+#define DBCLK_GPIO2			118
+#define PCLK_GPIO3			119
+#define DBCLK_GPIO3			120
+#define PCLK_GPIO4			121
+#define DBCLK_GPIO4			122
+#define PCLK_I2C1			123
+#define PCLK_I2C2			124
+#define PCLK_I2C3			125
+#define PCLK_I2C4			126
+#define PCLK_I2C5			127
+#define PCLK_I2C6			128
+#define PCLK_I2C7			129
+#define PCLK_I2C8			130
+#define CLK_I2C1			131
+#define CLK_I2C2			132
+#define CLK_I2C3			133
+#define CLK_I2C4			134
+#define CLK_I2C5			135
+#define CLK_I2C6			136
+#define CLK_I2C7			137
+#define CLK_I2C8			138
+#define PCLK_OTPC_NS			139
+#define CLK_OTPC_NS			140
+#define CLK_OTPC_ARB			141
+#define CLK_OTPC_AUTO_RD_G		142
+#define CLK_OTP_PHY_G			143
+#define PCLK_SARADC			144
+#define CLK_SARADC			145
+#define PCLK_SPI0			146
+#define PCLK_SPI1			147
+#define PCLK_SPI2			148
+#define PCLK_SPI3			149
+#define PCLK_SPI4			150
+#define CLK_SPI0			151
+#define CLK_SPI1			152
+#define CLK_SPI2			153
+#define CLK_SPI3			154
+#define CLK_SPI4			155
+#define ACLK_SPINLOCK			156
+#define PCLK_TSADC			157
+#define CLK_TSADC			158
+#define PCLK_UART1			159
+#define PCLK_UART2			160
+#define PCLK_UART3			161
+#define PCLK_UART4			162
+#define PCLK_UART5			163
+#define PCLK_UART6			164
+#define PCLK_UART7			165
+#define PCLK_UART8			166
+#define PCLK_UART9			167
+#define CLK_UART1_SRC			168
+#define CLK_UART1_FRAC			169
+#define CLK_UART1			170
+#define SCLK_UART1			171
+#define CLK_UART2_SRC			172
+#define CLK_UART2_FRAC			173
+#define CLK_UART2			174
+#define SCLK_UART2			175
+#define CLK_UART3_SRC			176
+#define CLK_UART3_FRAC			177
+#define CLK_UART3			178
+#define SCLK_UART3			179
+#define CLK_UART4_SRC			180
+#define CLK_UART4_FRAC			181
+#define CLK_UART4			182
+#define SCLK_UART4			183
+#define CLK_UART5_SRC			184
+#define CLK_UART5_FRAC			185
+#define CLK_UART5			186
+#define SCLK_UART5			187
+#define CLK_UART6_SRC			188
+#define CLK_UART6_FRAC			189
+#define CLK_UART6			190
+#define SCLK_UART6			191
+#define CLK_UART7_SRC			192
+#define CLK_UART7_FRAC			193
+#define CLK_UART7			194
+#define SCLK_UART7			195
+#define CLK_UART8_SRC			196
+#define CLK_UART8_FRAC			197
+#define CLK_UART8			198
+#define SCLK_UART8			199
+#define CLK_UART9_SRC			200
+#define CLK_UART9_FRAC			201
+#define CLK_UART9			202
+#define SCLK_UART9			203
+#define ACLK_CENTER_ROOT		204
+#define ACLK_CENTER_LOW_ROOT		205
+#define HCLK_CENTER_ROOT		206
+#define PCLK_CENTER_ROOT		207
+#define ACLK_DMA2DDR			208
+#define ACLK_DDR_SHAREMEM		209
+#define ACLK_CENTER_S200_ROOT		210
+#define ACLK_CENTER_S400_ROOT		211
+#define FCLK_DDR_CM0_CORE		212
+#define CLK_DDR_TIMER_ROOT		213
+#define CLK_DDR_TIMER0			214
+#define CLK_DDR_TIMER1			215
+#define TCLK_WDT_DDR			216
+#define CLK_DDR_CM0_RTC			217
+#define PCLK_WDT			218
+#define PCLK_TIMER			219
+#define PCLK_DMA2DDR			220
+#define PCLK_SHAREMEM			221
+#define CLK_50M_SRC			222
+#define CLK_100M_SRC			223
+#define CLK_150M_SRC			224
+#define CLK_200M_SRC			225
+#define CLK_250M_SRC			226
+#define CLK_300M_SRC			227
+#define CLK_350M_SRC			228
+#define CLK_400M_SRC			229
+#define CLK_450M_SRC			230
+#define CLK_500M_SRC			231
+#define CLK_600M_SRC			232
+#define CLK_650M_SRC			233
+#define CLK_700M_SRC			234
+#define CLK_800M_SRC			235
+#define CLK_1000M_SRC			236
+#define CLK_1200M_SRC			237
+#define ACLK_TOP_M300_ROOT		238
+#define ACLK_TOP_M500_ROOT		239
+#define ACLK_TOP_M400_ROOT		240
+#define ACLK_TOP_S200_ROOT		241
+#define ACLK_TOP_S400_ROOT		242
+#define CLK_MIPI_CAMARAOUT_M0		243
+#define CLK_MIPI_CAMARAOUT_M1		244
+#define CLK_MIPI_CAMARAOUT_M2		245
+#define CLK_MIPI_CAMARAOUT_M3		246
+#define CLK_MIPI_CAMARAOUT_M4		247
+#define MCLK_GMAC0_OUT			248
+#define REFCLKO25M_ETH0_OUT		249
+#define REFCLKO25M_ETH1_OUT		250
+#define CLK_CIFOUT_OUT			251
+#define PCLK_MIPI_DCPHY0		252
+#define PCLK_MIPI_DCPHY1		253
+#define PCLK_CSIPHY0			254
+#define PCLK_CSIPHY1			255
+#define ACLK_TOP_ROOT			256
+#define PCLK_TOP_ROOT			257
+#define ACLK_LOW_TOP_ROOT		258
+#define PCLK_CRU			259
+#define PCLK_GPU_ROOT			260
+#define CLK_GPU_SRC			261
+#define CLK_GPU				262
+#define CLK_GPU_COREGROUP		263
+#define CLK_GPU_STACKS			264
+#define PCLK_GPU_PVTM			265
+#define CLK_GPU_PVTM			266
+#define CLK_CORE_GPU_PVTM		267
+#define PCLK_GPU_GRF			268
+#define ACLK_ISP1_ROOT			269
+#define HCLK_ISP1_ROOT			270
+#define CLK_ISP1_CORE			271
+#define CLK_ISP1_CORE_MARVIN		272
+#define CLK_ISP1_CORE_VICAP		273
+#define ACLK_ISP1			274
+#define HCLK_ISP1			275
+#define ACLK_NPU1			276
+#define HCLK_NPU1			277
+#define ACLK_NPU2			278
+#define HCLK_NPU2			279
+#define HCLK_NPU_CM0_ROOT		280
+#define FCLK_NPU_CM0_CORE		281
+#define CLK_NPU_CM0_RTC			282
+#define PCLK_NPU_PVTM			283
+#define PCLK_NPU_GRF			284
+#define CLK_NPU_PVTM			285
+#define CLK_CORE_NPU_PVTM		286
+#define ACLK_NPU0			287
+#define HCLK_NPU0			288
+#define HCLK_NPU_ROOT			289
+#define CLK_NPU_DSU0			290
+#define PCLK_NPU_ROOT			291
+#define PCLK_NPU_TIMER			292
+#define CLK_NPUTIMER_ROOT		293
+#define CLK_NPUTIMER0			294
+#define CLK_NPUTIMER1			295
+#define PCLK_NPU_WDT			296
+#define TCLK_NPU_WDT			297
+#define HCLK_EMMC			298
+#define ACLK_EMMC			299
+#define CCLK_EMMC			300
+#define BCLK_EMMC			301
+#define TMCLK_EMMC			302
+#define SCLK_SFC			303
+#define HCLK_SFC			304
+#define HCLK_SFC_XIP			305
+#define HCLK_NVM_ROOT			306
+#define ACLK_NVM_ROOT			307
+#define CLK_GMAC0_PTP_REF		308
+#define CLK_GMAC1_PTP_REF		309
+#define CLK_GMAC_125M			310
+#define CLK_GMAC_50M			311
+#define ACLK_PHP_GIC_ITS		312
+#define ACLK_MMU_PCIE			313
+#define ACLK_MMU_PHP			314
+#define ACLK_PCIE_4L_DBI		315
+#define ACLK_PCIE_2L_DBI		316
+#define ACLK_PCIE_1L0_DBI		317
+#define ACLK_PCIE_1L1_DBI		318
+#define ACLK_PCIE_1L2_DBI		319
+#define ACLK_PCIE_4L_MSTR		320
+#define ACLK_PCIE_2L_MSTR		321
+#define ACLK_PCIE_1L0_MSTR		322
+#define ACLK_PCIE_1L1_MSTR		323
+#define ACLK_PCIE_1L2_MSTR		324
+#define ACLK_PCIE_4L_SLV		325
+#define ACLK_PCIE_2L_SLV		326
+#define ACLK_PCIE_1L0_SLV		327
+#define ACLK_PCIE_1L1_SLV		328
+#define ACLK_PCIE_1L2_SLV		329
+#define PCLK_PCIE_4L			330
+#define PCLK_PCIE_2L			331
+#define PCLK_PCIE_1L0			332
+#define PCLK_PCIE_1L1			333
+#define PCLK_PCIE_1L2			334
+#define CLK_PCIE_AUX0			335
+#define CLK_PCIE_AUX1			336
+#define CLK_PCIE_AUX2			337
+#define CLK_PCIE_AUX3			338
+#define CLK_PCIE_AUX4			339
+#define CLK_PIPEPHY0_REF		340
+#define CLK_PIPEPHY1_REF		341
+#define CLK_PIPEPHY2_REF		342
+#define PCLK_PHP_ROOT			343
+#define PCLK_GMAC0			344
+#define PCLK_GMAC1			345
+#define ACLK_PCIE_ROOT			346
+#define ACLK_PHP_ROOT			347
+#define ACLK_PCIE_BRIDGE		348
+#define ACLK_GMAC0			349
+#define ACLK_GMAC1			350
+#define CLK_PMALIVE0			351
+#define CLK_PMALIVE1			352
+#define CLK_PMALIVE2			353
+#define ACLK_SATA0			354
+#define ACLK_SATA1			355
+#define ACLK_SATA2			356
+#define CLK_RXOOB0			357
+#define CLK_RXOOB1			358
+#define CLK_RXOOB2			359
+#define ACLK_USB3OTG2			360
+#define SUSPEND_CLK_USB3OTG2		361
+#define REF_CLK_USB3OTG2		362
+#define CLK_UTMI_OTG2			363
+#define CLK_PIPEPHY0_PIPE_G		364
+#define CLK_PIPEPHY1_PIPE_G		365
+#define CLK_PIPEPHY2_PIPE_G		366
+#define CLK_PIPEPHY0_PIPE_ASIC_G	367
+#define CLK_PIPEPHY1_PIPE_ASIC_G	368
+#define CLK_PIPEPHY2_PIPE_ASIC_G	369
+#define CLK_PIPEPHY2_PIPE_U3_G		370
+#define CLK_PCIE1L2_PIPE		371
+#define CLK_PCIE4L_PIPE			372
+#define CLK_PCIE2L_PIPE			373
+#define PCLK_PCIE_COMBO_PIPE_PHY0	374
+#define PCLK_PCIE_COMBO_PIPE_PHY1	375
+#define PCLK_PCIE_COMBO_PIPE_PHY2	376
+#define PCLK_PCIE_COMBO_PIPE_PHY	377
+#define HCLK_RGA3_1			378
+#define ACLK_RGA3_1			379
+#define CLK_RGA3_1_CORE			380
+#define ACLK_RGA3_ROOT			381
+#define HCLK_RGA3_ROOT			382
+#define ACLK_RKVDEC_CCU			383
+#define HCLK_RKVDEC0			384
+#define ACLK_RKVDEC0			385
+#define CLK_RKVDEC0_CA			386
+#define CLK_RKVDEC0_HEVC_CA		387
+#define CLK_RKVDEC0_CORE		388
+#define HCLK_RKVDEC1			389
+#define ACLK_RKVDEC1			390
+#define CLK_RKVDEC1_CA			391
+#define CLK_RKVDEC1_HEVC_CA		392
+#define CLK_RKVDEC1_CORE		393
+#define HCLK_SDIO			394
+#define CCLK_SRC_SDIO			395
+#define ACLK_USB_ROOT			396
+#define HCLK_USB_ROOT			397
+#define HCLK_HOST0			398
+#define HCLK_HOST_ARB0			399
+#define HCLK_HOST1			400
+#define HCLK_HOST_ARB1			401
+#define ACLK_USB3OTG0			402
+#define SUSPEND_CLK_USB3OTG0		403
+#define REF_CLK_USB3OTG0		404
+#define ACLK_USB3OTG1			405
+#define SUSPEND_CLK_USB3OTG1		406
+#define REF_CLK_USB3OTG1		407
+#define UTMI_OHCI_CLK48_HOST0		408
+#define UTMI_OHCI_CLK48_HOST1		409
+#define HCLK_IEP2P0			410
+#define ACLK_IEP2P0			411
+#define CLK_IEP2P0_CORE			412
+#define ACLK_JPEG_ENCODER0		413
+#define HCLK_JPEG_ENCODER0		414
+#define ACLK_JPEG_ENCODER1		415
+#define HCLK_JPEG_ENCODER1		416
+#define ACLK_JPEG_ENCODER2		417
+#define HCLK_JPEG_ENCODER2		418
+#define ACLK_JPEG_ENCODER3		419
+#define HCLK_JPEG_ENCODER3		420
+#define ACLK_JPEG_DECODER		421
+#define HCLK_JPEG_DECODER		422
+#define HCLK_RGA2			423
+#define ACLK_RGA2			424
+#define CLK_RGA2_CORE			425
+#define HCLK_RGA3_0			426
+#define ACLK_RGA3_0			427
+#define CLK_RGA3_0_CORE			428
+#define ACLK_VDPU_ROOT			429
+#define ACLK_VDPU_LOW_ROOT		430
+#define HCLK_VDPU_ROOT			431
+#define ACLK_JPEG_DECODER_ROOT		432
+#define ACLK_VPU			433
+#define HCLK_VPU			434
+#define HCLK_RKVENC0_ROOT		435
+#define ACLK_RKVENC0_ROOT		436
+#define HCLK_RKVENC0			437
+#define ACLK_RKVENC0			438
+#define CLK_RKVENC0_CORE		439
+#define HCLK_RKVENC1_ROOT		440
+#define ACLK_RKVENC1_ROOT		441
+#define HCLK_RKVENC1			442
+#define ACLK_RKVENC1			443
+#define CLK_RKVENC1_CORE		444
+#define ICLK_CSIHOST01			445
+#define ICLK_CSIHOST0			446
+#define ICLK_CSIHOST1			447
+#define PCLK_CSI_HOST_0			448
+#define PCLK_CSI_HOST_1			449
+#define PCLK_CSI_HOST_2			450
+#define PCLK_CSI_HOST_3			451
+#define PCLK_CSI_HOST_4			452
+#define PCLK_CSI_HOST_5			453
+#define ACLK_FISHEYE0			454
+#define HCLK_FISHEYE0			455
+#define CLK_FISHEYE0_CORE		456
+#define ACLK_FISHEYE1			457
+#define HCLK_FISHEYE1			458
+#define CLK_FISHEYE1_CORE		459
+#define CLK_ISP0_CORE			460
+#define CLK_ISP0_CORE_MARVIN		461
+#define CLK_ISP0_CORE_VICAP		462
+#define ACLK_ISP0			463
+#define HCLK_ISP0			464
+#define ACLK_VI_ROOT			465
+#define HCLK_VI_ROOT			466
+#define PCLK_VI_ROOT			467
+#define DCLK_VICAP			468
+#define ACLK_VICAP			469
+#define HCLK_VICAP			470
+#define PCLK_DP0			471
+#define PCLK_DP1			472
+#define PCLK_S_DP0			473
+#define PCLK_S_DP1			474
+#define CLK_DP0				475
+#define CLK_DP1				476
+#define HCLK_HDCP_KEY0			477
+#define ACLK_HDCP0			478
+#define HCLK_HDCP0			479
+#define PCLK_HDCP0			480
+#define HCLK_I2S4_8CH			481
+#define ACLK_TRNG0			482
+#define PCLK_TRNG0			483
+#define ACLK_VO0_ROOT			484
+#define HCLK_VO0_ROOT			485
+#define HCLK_VO0_S_ROOT			486
+#define PCLK_VO0_ROOT			487
+#define PCLK_VO0_S_ROOT			488
+#define PCLK_VO0GRF			489
+#define CLK_I2S4_8CH_TX_SRC		490
+#define CLK_I2S4_8CH_TX_FRAC		491
+#define MCLK_I2S4_8CH_TX		492
+#define CLK_I2S4_8CH_TX			493
+#define HCLK_I2S8_8CH			494
+#define CLK_I2S8_8CH_TX_SRC		495
+#define CLK_I2S8_8CH_TX_FRAC		496
+#define MCLK_I2S8_8CH_TX		497
+#define CLK_I2S8_8CH_TX			498
+#define HCLK_SPDIF2_DP0			499
+#define CLK_SPDIF2_DP0_SRC		500
+#define CLK_SPDIF2_DP0_FRAC		501
+#define MCLK_SPDIF2_DP0			502
+#define CLK_SPDIF2_DP0			503
+#define MCLK_SPDIF2			504
+#define HCLK_SPDIF5_DP1			505
+#define CLK_SPDIF5_DP1_SRC		506
+#define CLK_SPDIF5_DP1_FRAC		507
+#define MCLK_SPDIF5_DP1			508
+#define CLK_SPDIF5_DP1			509
+#define MCLK_SPDIF5			510
+#define PCLK_EDP0			511
+#define CLK_EDP0_24M			512
+#define CLK_EDP0_200M			513
+#define PCLK_EDP1			514
+#define CLK_EDP1_24M			515
+#define CLK_EDP1_200M			516
+#define HCLK_HDCP_KEY1			517
+#define ACLK_HDCP1			518
+#define HCLK_HDCP1			519
+#define PCLK_HDCP1			520
+#define ACLK_HDMIRX			521
+#define PCLK_HDMIRX			522
+#define CLK_HDMIRX_REF			523
+#define CLK_HDMIRX_AUD_SRC		524
+#define CLK_HDMIRX_AUD_FRAC		525
+#define CLK_HDMIRX_AUD			526
+#define CLK_HDMIRX_AUD_P_MUX		527
+#define PCLK_HDMITX0			528
+#define CLK_HDMITX0_EARC		529
+#define CLK_HDMITX0_REF			530
+#define PCLK_HDMITX1			531
+#define CLK_HDMITX1_EARC		532
+#define CLK_HDMITX1_REF			533
+#define CLK_HDMITRX_REFSRC		534
+#define ACLK_TRNG1			535
+#define PCLK_TRNG1			536
+#define ACLK_HDCP1_ROOT			537
+#define ACLK_HDMIRX_ROOT		538
+#define HCLK_VO1_ROOT			539
+#define HCLK_VO1_S_ROOT			540
+#define PCLK_VO1_ROOT			541
+#define PCLK_VO1_S_ROOT			542
+#define PCLK_S_EDP0			543
+#define PCLK_S_EDP1			544
+#define PCLK_S_HDMIRX			545
+#define HCLK_I2S10_8CH			546
+#define CLK_I2S10_8CH_RX_SRC		547
+#define CLK_I2S10_8CH_RX_FRAC		548
+#define CLK_I2S10_8CH_RX		549
+#define MCLK_I2S10_8CH_RX		550
+#define HCLK_I2S7_8CH			551
+#define CLK_I2S7_8CH_RX_SRC		552
+#define CLK_I2S7_8CH_RX_FRAC		553
+#define CLK_I2S7_8CH_RX			554
+#define MCLK_I2S7_8CH_RX		555
+#define HCLK_I2S9_8CH			556
+#define CLK_I2S9_8CH_RX_SRC		557
+#define CLK_I2S9_8CH_RX_FRAC		558
+#define CLK_I2S9_8CH_RX			559
+#define MCLK_I2S9_8CH_RX		560
+#define CLK_I2S5_8CH_TX_SRC		561
+#define CLK_I2S5_8CH_TX_FRAC		562
+#define CLK_I2S5_8CH_TX			563
+#define MCLK_I2S5_8CH_TX		564
+#define HCLK_I2S5_8CH			565
+#define CLK_I2S6_8CH_TX_SRC		566
+#define CLK_I2S6_8CH_TX_FRAC		567
+#define CLK_I2S6_8CH_TX			568
+#define MCLK_I2S6_8CH_TX		569
+#define CLK_I2S6_8CH_RX_SRC		570
+#define CLK_I2S6_8CH_RX_FRAC		571
+#define CLK_I2S6_8CH_RX			572
+#define MCLK_I2S6_8CH_RX		573
+#define I2S6_8CH_MCLKOUT		574
+#define HCLK_I2S6_8CH			575
+#define HCLK_SPDIF3			576
+#define CLK_SPDIF3_SRC			577
+#define CLK_SPDIF3_FRAC			578
+#define CLK_SPDIF3			579
+#define MCLK_SPDIF3			580
+#define HCLK_SPDIF4			581
+#define CLK_SPDIF4_SRC			582
+#define CLK_SPDIF4_FRAC			583
+#define CLK_SPDIF4			584
+#define MCLK_SPDIF4			585
+#define HCLK_SPDIFRX0			586
+#define MCLK_SPDIFRX0			587
+#define HCLK_SPDIFRX1			588
+#define MCLK_SPDIFRX1			589
+#define HCLK_SPDIFRX2			590
+#define MCLK_SPDIFRX2			591
+#define ACLK_VO1USB_TOP_ROOT		592
+#define HCLK_VO1USB_TOP_ROOT		593
+#define CLK_HDMIHDP0			594
+#define CLK_HDMIHDP1			595
+#define PCLK_HDPTX0			596
+#define PCLK_HDPTX1			597
+#define PCLK_USBDPPHY0			598
+#define PCLK_USBDPPHY1			599
+#define ACLK_VOP_ROOT			600
+#define ACLK_VOP_LOW_ROOT		601
+#define HCLK_VOP_ROOT			602
+#define PCLK_VOP_ROOT			603
+#define HCLK_VOP			604
+#define ACLK_VOP			605
+#define DCLK_VOP0_SRC			606
+#define DCLK_VOP1_SRC			607
+#define DCLK_VOP2_SRC			608
+#define DCLK_VOP0			609
+#define DCLK_VOP1			610
+#define DCLK_VOP2			611
+#define DCLK_VOP3			612
+#define PCLK_DSIHOST0			613
+#define PCLK_DSIHOST1			614
+#define CLK_DSIHOST0			615
+#define CLK_DSIHOST1			616
+#define CLK_VOP_PMU			617
+#define ACLK_VOP_DOBY			618
+#define ACLK_VOP_SUB_SRC		619
+#define CLK_USBDP_PHY0_IMMORTAL		620
+#define CLK_USBDP_PHY1_IMMORTAL		621
+#define CLK_PMU0			622
+#define PCLK_PMU0			623
+#define PCLK_PMU0IOC			624
+#define PCLK_GPIO0			625
+#define DBCLK_GPIO0			626
+#define PCLK_I2C0			627
+#define CLK_I2C0			628
+#define HCLK_I2S1_8CH			629
+#define CLK_I2S1_8CH_TX_SRC		630
+#define CLK_I2S1_8CH_TX_FRAC		631
+#define CLK_I2S1_8CH_TX			632
+#define MCLK_I2S1_8CH_TX		633
+#define CLK_I2S1_8CH_RX_SRC		634
+#define CLK_I2S1_8CH_RX_FRAC		635
+#define CLK_I2S1_8CH_RX			636
+#define MCLK_I2S1_8CH_RX		637
+#define I2S1_8CH_MCLKOUT		638
+#define CLK_PMU1_50M_SRC		639
+#define CLK_PMU1_100M_SRC		640
+#define CLK_PMU1_200M_SRC		641
+#define CLK_PMU1_300M_SRC		642
+#define CLK_PMU1_400M_SRC		643
+#define HCLK_PMU1_ROOT			644
+#define PCLK_PMU1_ROOT			645
+#define PCLK_PMU0_ROOT			646
+#define HCLK_PMU_CM0_ROOT		647
+#define PCLK_PMU1			648
+#define CLK_DDR_FAIL_SAFE		649
+#define CLK_PMU1			650
+#define HCLK_PDM0			651
+#define MCLK_PDM0			652
+#define HCLK_VAD			653
+#define FCLK_PMU_CM0_CORE		654
+#define CLK_PMU_CM0_RTC			655
+#define PCLK_PMU1_IOC			656
+#define PCLK_PMU1PWM			657
+#define CLK_PMU1PWM			658
+#define CLK_PMU1PWM_CAPTURE		659
+#define PCLK_PMU1TIMER			660
+#define CLK_PMU1TIMER_ROOT		661
+#define CLK_PMU1TIMER0			662
+#define CLK_PMU1TIMER1			663
+#define CLK_UART0_SRC			664
+#define CLK_UART0_FRAC			665
+#define CLK_UART0			666
+#define SCLK_UART0			667
+#define PCLK_UART0			668
+#define PCLK_PMU1WDT			669
+#define TCLK_PMU1WDT			670
+#define CLK_CR_PARA			671
+#define CLK_USB2PHY_HDPTXRXPHY_REF	672
+#define CLK_USBDPPHY_MIPIDCPPHY_REF	673
+#define CLK_REF_PIPE_PHY0_OSC_SRC	674
+#define CLK_REF_PIPE_PHY1_OSC_SRC	675
+#define CLK_REF_PIPE_PHY2_OSC_SRC	676
+#define CLK_REF_PIPE_PHY0_PLL_SRC	677
+#define CLK_REF_PIPE_PHY1_PLL_SRC	678
+#define CLK_REF_PIPE_PHY2_PLL_SRC	679
+#define CLK_REF_PIPE_PHY0		680
+#define CLK_REF_PIPE_PHY1		681
+#define CLK_REF_PIPE_PHY2		682
+#define SCLK_SDIO_DRV			683
+#define SCLK_SDIO_SAMPLE		684
+#define SCLK_SDMMC_DRV			685
+#define SCLK_SDMMC_SAMPLE		686
+#define CLK_PCIE1L0_PIPE		687
+#define CLK_PCIE1L1_PIPE		688
+#define CLK_BIGCORE0_PVTM		689
+#define CLK_CORE_BIGCORE0_PVTM		690
+#define CLK_BIGCORE1_PVTM		691
+#define CLK_CORE_BIGCORE1_PVTM		692
+#define CLK_LITCORE_PVTM		693
+#define CLK_CORE_LITCORE_PVTM		694
+#define CLK_AUX16M_0			695
+#define CLK_AUX16M_1			696
+#define CLK_PHY0_REF_ALT_P		697
+#define CLK_PHY0_REF_ALT_M		698
+#define CLK_PHY1_REF_ALT_P		699
+#define CLK_PHY1_REF_ALT_M		700
+#define ACLK_ISP1_PRE			701
+#define HCLK_ISP1_PRE			702
+#define HCLK_NVM			703
+#define ACLK_USB			704
+#define HCLK_USB			705
+#define ACLK_JPEG_DECODER_PRE		706
+#define ACLK_VDPU_LOW_PRE		707
+#define ACLK_RKVENC1_PRE		708
+#define HCLK_RKVENC1_PRE		709
+#define HCLK_RKVDEC0_PRE		710
+#define ACLK_RKVDEC0_PRE		711
+#define HCLK_RKVDEC1_PRE		712
+#define ACLK_RKVDEC1_PRE		713
+#define ACLK_HDCP0_PRE			714
+#define HCLK_VO0			715
+#define ACLK_HDCP1_PRE			716
+#define HCLK_VO1			717
+#define ACLK_AV1_PRE			718
+#define PCLK_AV1_PRE			719
+#define HCLK_SDIO_PRE			720
+
+#define CLK_NR_CLKS			(HCLK_SDIO_PRE + 1)
+
+/* scmi-clocks indices */
+
+#define SCMI_CLK_CPUL			0
+#define SCMI_CLK_DSU			1
+#define SCMI_CLK_CPUB01			2
+#define SCMI_CLK_CPUB23			3
+#define SCMI_CLK_DDR			4
+#define SCMI_CLK_GPU			5
+#define SCMI_CLK_NPU			6
+#define SCMI_CLK_SBUS			7
+#define SCMI_PCLK_SBUS			8
+#define SCMI_CCLK_SD			9
+#define SCMI_DCLK_SD			10
+#define SCMI_ACLK_SECURE_NS		11
+#define SCMI_HCLK_SECURE_NS		12
+#define SCMI_TCLK_WDT			13
+#define SCMI_KEYLADDER_CORE		14
+#define SCMI_KEYLADDER_RNG		15
+#define SCMI_ACLK_SECURE_S		16
+#define SCMI_HCLK_SECURE_S		17
+#define SCMI_PCLK_SECURE_S		18
+#define SCMI_CRYPTO_RNG			19
+#define SCMI_CRYPTO_CORE		20
+#define SCMI_CRYPTO_PKA			21
+#define SCMI_SPLL			22
+#define SCMI_HCLK_SD			23
+
+#endif
diff --git a/dts/include/dt-bindings/clock/suniv-ccu-f1c100s.h b/dts/include/dt-bindings/clock/suniv-ccu-f1c100s.h
index f5ac155c9c..d7570765f4 100644
--- a/dts/include/dt-bindings/clock/suniv-ccu-f1c100s.h
+++ b/dts/include/dt-bindings/clock/suniv-ccu-f1c100s.h
@@ -67,4 +67,6 @@
 #define CLK_CODEC		65
 #define CLK_AVS			66
 
+#define CLK_IR			67
+
 #endif
diff --git a/dts/include/dt-bindings/clock/tegra234-clock.h b/dts/include/dt-bindings/clock/tegra234-clock.h
index 173364a933..c360455d02 100644
--- a/dts/include/dt-bindings/clock/tegra234-clock.h
+++ b/dts/include/dt-bindings/clock/tegra234-clock.h
@@ -9,6 +9,12 @@
  * @defgroup bpmp_clock_ids Clock ID's
  * @{
  */
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ACTMON */
+#define TEGRA234_CLK_ACTMON			1U
+/** @brief output of gate CLK_ENB_ADSP */
+#define TEGRA234_CLK_ADSP			2U
+/** @brief output of gate CLK_ENB_ADSPNEON */
+#define TEGRA234_CLK_ADSPNEON			3U
 /** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AHUB */
 #define TEGRA234_CLK_AHUB			4U
 /** @brief output of gate CLK_ENB_APB2APE */
@@ -17,6 +23,18 @@
 #define TEGRA234_CLK_APE			6U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AUD_MCLK */
 #define TEGRA234_CLK_AUD_MCLK			7U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AXI_CBB */
+#define TEGRA234_CLK_AXI_CBB			8U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN1 */
+#define TEGRA234_CLK_CAN1			9U
+/** @brief output of gate CLK_ENB_CAN1_HOST */
+#define TEGRA234_CLK_CAN1_HOST			10U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN2 */
+#define TEGRA234_CLK_CAN2			11U
+/** @brief output of gate CLK_ENB_CAN2_HOST */
+#define TEGRA234_CLK_CAN2_HOST			12U
+/** @brief output of divider CLK_RST_CONTROLLER_CLK_M_DIVIDE */
+#define TEGRA234_CLK_CLK_M			14U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC1 */
 #define TEGRA234_CLK_DMIC1			15U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC2 */
@@ -25,6 +43,28 @@
 #define TEGRA234_CLK_DMIC3			17U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC4 */
 #define TEGRA234_CLK_DMIC4			18U
+/** @brief output of gate CLK_ENB_DPAUX */
+#define TEGRA234_CLK_DPAUX			19U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG1 */
+#define TEGRA234_CLK_NVJPG1			20U
+/**
+ * @brief output of mux controlled by CLK_RST_CONTROLLER_ACLK_BURST_POLICY
+ * divided by the divider controlled by ACLK_CLK_DIVISOR in
+ * CLK_RST_CONTROLLER_SUPER_ACLK_DIVIDER
+ */
+#define TEGRA234_CLK_ACLK			21U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_MSS_ENCRYPT switch divider output */
+#define TEGRA234_CLK_MSS_ENCRYPT		22U
+/** @brief clock recovered from EAVB input */
+#define TEGRA234_CLK_EQOS_RX_INPUT		23U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_APB switch divider output */
+#define TEGRA234_CLK_AON_APB			25U
+/** @brief CLK_RST_CONTROLLER_AON_NIC_RATE divider output */
+#define TEGRA234_CLK_AON_NIC			26U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_CPU_NIC switch divider output */
+#define TEGRA234_CLK_AON_CPU_NIC		27U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLA1_BASE for use by audio clocks */
+#define TEGRA234_CLK_PLLA1			28U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK1 */
 #define TEGRA234_CLK_DSPK1			29U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK2 */
@@ -38,10 +78,33 @@
  * throughput and memory controller power.
  */
 #define TEGRA234_CLK_EMC			31U
-/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */
-#define TEGRA234_CLK_HOST1X                     46U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_AXI_CLK_0 divider gated output */
+#define TEGRA234_CLK_EQOS_AXI			32U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_PTP_REF_CLK_0 divider gated output */
+#define TEGRA234_CLK_EQOS_PTP_REF		33U
+/** @brief output of gate CLK_ENB_EQOS_RX */
+#define TEGRA234_CLK_EQOS_RX			34U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK divider gated output */
+#define TEGRA234_CLK_EQOS_TX			35U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH1 */
+#define TEGRA234_CLK_EXTPERIPH1			36U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH2 */
+#define TEGRA234_CLK_EXTPERIPH2			37U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH3 */
+#define TEGRA234_CLK_EXTPERIPH3			38U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH4 */
+#define TEGRA234_CLK_EXTPERIPH4			39U
 /** @brief output of gate CLK_ENB_FUSE */
 #define TEGRA234_CLK_FUSE			40U
+/** @brief output of GPU GPC0 clkGen (in 1x mode same rate as GPC0 MUX2 out) */
+#define TEGRA234_CLK_GPC0CLK			41U
+/** @brief TODO */
+#define TEGRA234_CLK_GPU_PWR			42U
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA2CODEC_2X */
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */
+#define TEGRA234_CLK_HOST1X			46U
+/** @brief xusb_hs_hsicp_clk */
+#define TEGRA234_CLK_XUSB_HS_HSICP		47U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C1 */
 #define TEGRA234_CLK_I2C1			48U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 */
@@ -82,10 +145,66 @@
 #define TEGRA234_CLK_I2S6			66U
 /** @brief clock recovered from I2S6 input */
 #define TEGRA234_CLK_I2S6_SYNC_INPUT		67U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ISP */
+#define TEGRA234_CLK_ISP			69U
+/** @brief Monitored branch of EQOS_RX clock */
+#define TEGRA234_CLK_EQOS_RX_M			70U
+/** @brief CLK_RST_CONTROLLER_MAUDCLK_OUT_SWITCH_DIVIDER switch divider output (maudclk) */
+#define TEGRA234_CLK_MAUD			71U
+/** @brief output of gate CLK_ENB_MIPI_CAL */
+#define TEGRA234_CLK_MIPI_CAL			72U
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_CORE_PLL_FIXED */
+#define TEGRA234_CLK_MPHY_CORE_PLL_FIXED	73U
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_ANA */
+#define TEGRA234_CLK_MPHY_L0_RX_ANA		74U
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_LS_BIT */
+#define TEGRA234_CLK_MPHY_L0_RX_LS_BIT		75U
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_SYMB */
+#define TEGRA234_CLK_MPHY_L0_RX_SYMB		76U
+/** @brief output of gate CLK_ENB_MPHY_L0_TX_LS_3XBIT */
+#define TEGRA234_CLK_MPHY_L0_TX_LS_3XBIT	77U
+/** @brief output of gate CLK_ENB_MPHY_L0_TX_SYMB */
+#define TEGRA234_CLK_MPHY_L0_TX_SYMB		78U
+/** @brief output of gate CLK_ENB_MPHY_L1_RX_ANA */
+#define TEGRA234_CLK_MPHY_L1_RX_ANA		79U
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_TX_1MHZ_REF */
+#define TEGRA234_CLK_MPHY_TX_1MHZ_REF		80U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSI */
+#define TEGRA234_CLK_NVCSI			81U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSILP */
+#define TEGRA234_CLK_NVCSILP			82U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDEC */
+#define TEGRA234_CLK_NVDEC			83U
+/** @brief CLK_RST_CONTROLLER_HUBCLK_OUT_SWITCH_DIVIDER switch divider output (hubclk) */
+#define TEGRA234_CLK_HUB			84U
+/** @brief CLK_RST_CONTROLLER_DISPCLK_SWITCH_DIVIDER switch divider output (dispclk) */
+#define TEGRA234_CLK_DISP			85U
+/** @brief RG_CLK_CTRL__0_DIV divider output (nvdisplay_p0_clk) */
+#define TEGRA234_CLK_NVDISPLAY_P0		86U
+/** @brief RG_CLK_CTRL__1_DIV divider output (nvdisplay_p1_clk) */
+#define TEGRA234_CLK_NVDISPLAY_P1		87U
+/** @brief DSC_CLK (DISPCLK ÷ 3) */
+#define TEGRA234_CLK_DSC			88U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVENC */
+#define TEGRA234_CLK_NVENC			89U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG */
+#define TEGRA234_CLK_NVJPG			90U
+/** @brief input from Tegra's XTAL_IN */
+#define TEGRA234_CLK_OSC			91U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_TOUCH switch divider output */
+#define TEGRA234_CLK_AON_TOUCH			92U
 /** PLL controlled by CLK_RST_CONTROLLER_PLLA_BASE for use by audio clocks */
 #define TEGRA234_CLK_PLLA			93U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLAON_BASE for use by IP blocks in the AON domain */
+#define TEGRA234_CLK_PLLAON			94U
+/** Fixed 100MHz PLL for PCIe, SATA and superspeed USB */
+#define TEGRA234_CLK_PLLE			100U
+/** @brief PLLP vco output */
+#define TEGRA234_CLK_PLLP			101U
 /** @brief PLLP clk output */
 #define TEGRA234_CLK_PLLP_OUT0			102U
+/** Fixed frequency 960MHz PLL for USB and EAVB */
+#define TEGRA234_CLK_UTMIP_PLL			103U
 /** @brief output of the divider CLK_RST_CONTROLLER_PLLA_OUT */
 #define TEGRA234_CLK_PLLA_OUT0			104U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM1 */
@@ -104,8 +223,50 @@
 #define TEGRA234_CLK_PWM7			111U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM8 */
 #define TEGRA234_CLK_PWM8			112U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_RCE_CPU_NIC output */
+#define TEGRA234_CLK_RCE_CPU_NIC		113U
+/** @brief CLK_RST_CONTROLLER_RCE_NIC_RATE divider output */
+#define TEGRA234_CLK_RCE_NIC			114U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_I2C_SLOW switch divider output */
+#define TEGRA234_CLK_AON_I2C_SLOW		117U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_CPU_NIC */
+#define TEGRA234_CLK_SCE_CPU_NIC		118U
+/** @brief output of divider CLK_RST_CONTROLLER_SCE_NIC_RATE */
+#define TEGRA234_CLK_SCE_NIC			119U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 */
+#define TEGRA234_CLK_SDMMC1			120U
+/** @brief Logical clk for setting the UPHY PLL3 rate */
+#define TEGRA234_CLK_UPHY_PLL3			121U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */
 #define TEGRA234_CLK_SDMMC4			123U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SE switch divider gated output */
+#define TEGRA234_CLK_SE				124U
+/** @brief VPLL select for sor0_ref clk driven by disp_2clk_sor0_head_sel signal */
+#define TEGRA234_CLK_SOR0_PLL_REF		125U
+/** @brief Output of mux controlled by disp_2clk_sor0_pll_ref_clk_safe signal (sor0_ref_clk) */
+#define TEGRA234_CLK_SOR0_REF			126U
+/** @brief VPLL select for sor1_ref clk driven by disp_2clk_sor0_head_sel signal */
+#define TEGRA234_CLK_SOR1_PLL_REF		127U
+/** @brief SOR_PLL_REF_CLK_CTRL__0_DIV divider output */
+#define TEGRA234_CLK_PRE_SOR0_REF		128U
+/** @brief Output of mux controlled by disp_2clk_sor1_pll_ref_clk_safe signal (sor1_ref_clk) */
+#define TEGRA234_CLK_SOR1_REF			129U
+/** @brief SOR_PLL_REF_CLK_CTRL__1_DIV divider output */
+#define TEGRA234_CLK_PRE_SOR1_REF		130U
+/** @brief output of gate CLK_ENB_SOR_SAFE */
+#define TEGRA234_CLK_SOR_SAFE			131U
+/** @brief SOR_CLK_CTRL__0_DIV divider output */
+#define TEGRA234_CLK_SOR0_DIV			132U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC5 */
+#define TEGRA234_CLK_DMIC5			134U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI1 */
+#define TEGRA234_CLK_SPI1			135U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI2 */
+#define TEGRA234_CLK_SPI2			136U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI3 */
+#define TEGRA234_CLK_SPI3			137U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C_SLOW */
+#define TEGRA234_CLK_I2C_SLOW			138U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC1 */
 #define TEGRA234_CLK_SYNC_DMIC1			139U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC2 */
@@ -130,28 +291,132 @@
 #define TEGRA234_CLK_SYNC_I2S5			149U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S6 */
 #define TEGRA234_CLK_SYNC_I2S6			150U
+/** @brief controls MPHY_FORCE_LS_MODE upon enable & disable */
+#define TEGRA234_CLK_MPHY_FORCE_LS_MODE		151U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH0 */
+#define TEGRA234_CLK_TACH0			152U
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSEC */
+#define TEGRA234_CLK_TSEC			153U
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PKA */
+#define TEGRA234_CLK_TSEC_PKA			154U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */
 #define TEGRA234_CLK_UARTA			155U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTB */
+#define TEGRA234_CLK_UARTB			156U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTC */
+#define TEGRA234_CLK_UARTC			157U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTD */
+#define TEGRA234_CLK_UARTD			158U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTE */
+#define TEGRA234_CLK_UARTE			159U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTF */
+#define TEGRA234_CLK_UARTF			160U
 /** @brief output of gate CLK_ENB_PEX1_CORE_6 */
 #define TEGRA234_CLK_PEX1_C6_CORE		161U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL */
+#define TEGRA234_CLK_UART_FST_MIPI_CAL		162U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSDEV_REF */
+#define TEGRA234_CLK_UFSDEV_REF			163U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSHC_CG_SYS */
+#define TEGRA234_CLK_UFSHC			164U
+/** @brief output of gate CLK_ENB_USB2_TRK */
+#define TEGRA234_CLK_USB2_TRK			165U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI */
+#define TEGRA234_CLK_VI				166U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VIC */
-#define TEGRA234_CLK_VIC                        167U
+#define TEGRA234_CLK_VIC			167U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_CSITE switch divider output */
+#define TEGRA234_CLK_CSITE			168U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_IST switch divider output */
+#define TEGRA234_CLK_IST			169U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_IST_JTAG_REG_CLK_SEL */
+#define TEGRA234_CLK_JTAG_INTFC_PRE_CG		170U
 /** @brief output of gate CLK_ENB_PEX2_CORE_7 */
 #define TEGRA234_CLK_PEX2_C7_CORE		171U
 /** @brief output of gate CLK_ENB_PEX2_CORE_8 */
 #define TEGRA234_CLK_PEX2_C8_CORE		172U
 /** @brief output of gate CLK_ENB_PEX2_CORE_9 */
 #define TEGRA234_CLK_PEX2_C9_CORE		173U
+/** @brief dla0_falcon_clk */
+#define TEGRA234_CLK_DLA0_FALCON		174U
+/** @brief dla0_core_clk */
+#define TEGRA234_CLK_DLA0_CORE			175U
+/** @brief dla1_falcon_clk */
+#define TEGRA234_CLK_DLA1_FALCON		176U
+/** @brief dla1_core_clk */
+#define TEGRA234_CLK_DLA1_CORE			177U
+/** @brief Output of mux controlled by disp_2clk_sor0_clk_safe signal (sor0_clk) */
+#define TEGRA234_CLK_SOR0			178U
+/** @brief Output of mux controlled by disp_2clk_sor1_clk_safe signal (sor1_clk) */
+#define TEGRA234_CLK_SOR1			179U
+/** @brief DP macro feedback clock (same as LINKA_SYM CLKOUT) */
+#define TEGRA234_CLK_SOR_PAD_INPUT		180U
+/** @brief Output of mux controlled by disp_2clk_h0_dsi_sel signal in sf0_clk path */
+#define TEGRA234_CLK_PRE_SF0			181U
+/** @brief Output of mux controlled by disp_2clk_sf0_clk_safe signal (sf0_clk) */
+#define TEGRA234_CLK_SF0			182U
+/** @brief Output of mux controlled by disp_2clk_sf1_clk_safe signal (sf1_clk) */
+#define TEGRA234_CLK_SF1			183U
+/** @brief CLKOUT_AB output from DSI BRICK A (dsi_clkout_ab) */
+#define TEGRA234_CLK_DSI_PAD_INPUT		184U
 /** @brief output of gate CLK_ENB_PEX2_CORE_10 */
 #define TEGRA234_CLK_PEX2_C10_CORE		187U
-/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 switch divider output */
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_UARTI switch divider output (uarti_r_clk) */
+#define TEGRA234_CLK_UARTI			188U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_UARTJ switch divider output (uartj_r_clk) */
+#define TEGRA234_CLK_UARTJ			189U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_UARTH switch divider output */
+#define TEGRA234_CLK_UARTH			190U
+/** @brief ungated version of fuse clk */
+#define TEGRA234_CLK_FUSE_SERIAL		191U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 switch divider output (qspi0_2x_pm_clk) */
 #define TEGRA234_CLK_QSPI0_2X_PM		192U
-/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 switch divider output */
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 switch divider output (qspi1_2x_pm_clk) */
 #define TEGRA234_CLK_QSPI1_2X_PM		193U
-/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 */
+/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 (qspi0_pm_clk) */
 #define TEGRA234_CLK_QSPI0_PM			194U
-/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 */
+/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 (qspi1_pm_clk) */
 #define TEGRA234_CLK_QSPI1_PM			195U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_VI_CONST switch divider output */
+#define TEGRA234_CLK_VI_CONST			196U
+/** @brief NAFLL clock source for BPMP */
+#define TEGRA234_CLK_NAFLL_BPMP			197U
+/** @brief NAFLL clock source for SCE */
+#define TEGRA234_CLK_NAFLL_SCE			198U
+/** @brief NAFLL clock source for NVDEC */
+#define TEGRA234_CLK_NAFLL_NVDEC		199U
+/** @brief NAFLL clock source for NVJPG */
+#define TEGRA234_CLK_NAFLL_NVJPG		200U
+/** @brief NAFLL clock source for TSEC */
+#define TEGRA234_CLK_NAFLL_TSEC			201U
+/** @brief NAFLL clock source for VI */
+#define TEGRA234_CLK_NAFLL_VI			203U
+/** @brief NAFLL clock source for SE */
+#define TEGRA234_CLK_NAFLL_SE			204U
+/** @brief NAFLL clock source for NVENC */
+#define TEGRA234_CLK_NAFLL_NVENC		205U
+/** @brief NAFLL clock source for ISP */
+#define TEGRA234_CLK_NAFLL_ISP			206U
+/** @brief NAFLL clock source for VIC */
+#define TEGRA234_CLK_NAFLL_VIC			207U
+/** @brief NAFLL clock source for AXICBB */
+#define TEGRA234_CLK_NAFLL_AXICBB		209U
+/** @brief NAFLL clock source for NVJPG1 */
+#define TEGRA234_CLK_NAFLL_NVJPG1		210U
+/** @brief NAFLL clock source for PVA core */
+#define TEGRA234_CLK_NAFLL_PVA0_CORE		211U
+/** @brief NAFLL clock source for PVA VPS */
+#define TEGRA234_CLK_NAFLL_PVA0_VPS		212U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_DBGAPB_0 switch divider output (dbgapb_clk) */
+#define TEGRA234_CLK_DBGAPB			213U
+/** @brief NAFLL clock source for RCE */
+#define TEGRA234_CLK_NAFLL_RCE			214U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_LA switch divider output (la_r_clk) */
+#define TEGRA234_CLK_LA				215U
+/** @brief output of the divider CLK_RST_CONTROLLER_PLLP_OUTD */
+#define TEGRA234_CLK_PLLP_OUT_JTAG		216U
+/** @brief AXI_CBB branch sharing gate control with SDMMC4 */
+#define TEGRA234_CLK_SDMMC4_AXICIF		217U
 /** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM switch divider output */
 #define TEGRA234_CLK_SDMMC_LEGACY_TM		219U
 /** @brief output of gate CLK_ENB_PEX0_CORE_0 */
@@ -166,8 +431,42 @@
 #define TEGRA234_CLK_PEX0_C4_CORE		224U
 /** @brief output of gate CLK_ENB_PEX1_CORE_5 */
 #define TEGRA234_CLK_PEX1_C5_CORE		225U
+/** @brief Monitored branch of PEX0_C0_CORE clock */
+#define TEGRA234_CLK_PEX0_C0_CORE_M		229U
+/** @brief Monitored branch of PEX0_C1_CORE clock */
+#define TEGRA234_CLK_PEX0_C1_CORE_M		230U
+/** @brief Monitored branch of PEX0_C2_CORE clock */
+#define TEGRA234_CLK_PEX0_C2_CORE_M		231U
+/** @brief Monitored branch of PEX0_C3_CORE clock */
+#define TEGRA234_CLK_PEX0_C3_CORE_M		232U
+/** @brief Monitored branch of PEX0_C4_CORE clock */
+#define TEGRA234_CLK_PEX0_C4_CORE_M		233U
+/** @brief Monitored branch of PEX1_C5_CORE clock */
+#define TEGRA234_CLK_PEX1_C5_CORE_M		234U
+/** @brief Monitored branch of PEX1_C6_CORE clock */
+#define TEGRA234_CLK_PEX1_C6_CORE_M		235U
+/** @brief output of GPU GPC1 clkGen (in 1x mode same rate as GPC1 MUX2 out) */
+#define TEGRA234_CLK_GPC1CLK			236U
 /** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */
 #define TEGRA234_CLK_PLLC4			237U
+/** @brief PLLC4 VCO followed by DIV3 path */
+#define TEGRA234_CLK_PLLC4_OUT1			239U
+/** @brief PLLC4 VCO followed by DIV5 path */
+#define TEGRA234_CLK_PLLC4_OUT2			240U
+/** @brief output of the mux controlled by PLLC4_CLK_SEL */
+#define TEGRA234_CLK_PLLC4_MUXED		241U
+/** @brief PLLC4 VCO followed by DIV2 path */
+#define TEGRA234_CLK_PLLC4_VCO_DIV2		242U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVHS_BASE */
+#define TEGRA234_CLK_PLLNVHS			243U
+/** @brief Monitored branch of PEX2_C7_CORE clock */
+#define TEGRA234_CLK_PEX2_C7_CORE_M		244U
+/** @brief Monitored branch of PEX2_C8_CORE clock */
+#define TEGRA234_CLK_PEX2_C8_CORE_M		245U
+/** @brief Monitored branch of PEX2_C9_CORE clock */
+#define TEGRA234_CLK_PEX2_C9_CORE_M		246U
+/** @brief Monitored branch of PEX2_C10_CORE clock */
+#define TEGRA234_CLK_PEX2_C10_CORE_M		247U
 /** @brief RX clock recovered from MGBE0 lane input */
 #define TEGRA234_CLK_MGBE0_RX_INPUT		248U
 /** @brief RX clock recovered from MGBE1 lane input */
@@ -176,8 +475,185 @@
 #define TEGRA234_CLK_MGBE2_RX_INPUT		250U
 /** @brief RX clock recovered from MGBE3 lane input */
 #define TEGRA234_CLK_MGBE3_RX_INPUT		251U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_SATA_USB_RX_BYP switch divider output */
+#define TEGRA234_CLK_PEX_SATA_USB_RX_BYP	254U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL0_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL0_MGMT	255U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL1_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL1_MGMT	256U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL2_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL2_MGMT	257U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL3_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL3_MGMT	258U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_NVHS_RX_BYP switch divider output */
+#define TEGRA234_CLK_NVHS_RX_BYP_REF		263U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_NVHS_PLL0_MGMT switch divider output */
+#define TEGRA234_CLK_NVHS_PLL0_MGMT		264U
+/** @brief xusb_core_dev_clk */
+#define TEGRA234_CLK_XUSB_CORE_DEV		265U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_CORE_HOST switch divider output  */
+#define TEGRA234_CLK_XUSB_CORE_MUX		266U
+/** @brief xusb_core_host_clk */
+#define TEGRA234_CLK_XUSB_CORE_HOST		267U
+/** @brief xusb_core_superspeed_clk */
+#define TEGRA234_CLK_XUSB_CORE_SS		268U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_FALCON switch divider output */
+#define TEGRA234_CLK_XUSB_FALCON		269U
+/** @brief xusb_falcon_host_clk */
+#define TEGRA234_CLK_XUSB_FALCON_HOST		270U
+/** @brief xusb_falcon_superspeed_clk */
+#define TEGRA234_CLK_XUSB_FALCON_SS		271U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_FS switch divider output */
+#define TEGRA234_CLK_XUSB_FS			272U
+/** @brief xusb_fs_host_clk */
+#define TEGRA234_CLK_XUSB_FS_HOST		273U
+/** @brief xusb_fs_dev_clk */
+#define TEGRA234_CLK_XUSB_FS_DEV		274U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_SS switch divider output */
+#define TEGRA234_CLK_XUSB_SS			275U
+/** @brief xusb_ss_dev_clk */
+#define TEGRA234_CLK_XUSB_SS_DEV		276U
+/** @brief xusb_ss_superspeed_clk */
+#define TEGRA234_CLK_XUSB_SS_SUPERSPEED		277U
+/** @brief NAFLL clock source for CPU cluster 0 */
+#define TEGRA234_CLK_NAFLL_CLUSTER0		280U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER0_CORE	280U
+/** @brief NAFLL clock source for CPU cluster 1 */
+#define TEGRA234_CLK_NAFLL_CLUSTER1		281U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER1_CORE	281U
+/** @brief NAFLL clock source for CPU cluster 2 */
+#define TEGRA234_CLK_NAFLL_CLUSTER2		282U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER2_CORE	282U
+/** @brief CLK_RST_CONTROLLER_CAN1_CORE_RATE divider output */
+#define TEGRA234_CLK_CAN1_CORE			284U
+/** @brief CLK_RST_CONTROLLER_CAN2_CORE_RATE divider outputt */
+#define TEGRA234_CLK_CAN2_CORE			285U
+/** @brief CLK_RST_CONTROLLER_PLLA1_OUT1 switch divider output */
+#define TEGRA234_CLK_PLLA1_OUT1			286U
+/** @brief NVHS PLL hardware power sequencer (overrides 'manual' programming of PLL) */
+#define TEGRA234_CLK_PLLNVHS_HPS		287U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLREFE_BASE */
+#define TEGRA234_CLK_PLLREFE_VCOOUT		288U
 /** @brief 32K input clock provided by PMIC */
 #define TEGRA234_CLK_CLK_32K			289U
+/** @brief Fixed 48MHz clock divided down from utmipll */
+#define TEGRA234_CLK_UTMIPLL_CLKOUT48		291U
+/** @brief Fixed 480MHz clock divided down from utmipll */
+#define TEGRA234_CLK_UTMIPLL_CLKOUT480		292U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVCSI_BASE  */
+#define TEGRA234_CLK_PLLNVCSI			294U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PVA0_CPU_AXI switch divider output */
+#define TEGRA234_CLK_PVA0_CPU_AXI		295U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PVA0_VPS switch divider output */
+#define TEGRA234_CLK_PVA0_VPS			297U
+/** @brief DLA0_CORE_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA0_CORE		299U
+/** @brief DLA0_FALCON_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA0_FALCON		300U
+/** @brief DLA1_CORE_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA1_CORE		301U
+/** @brief DLA1_FALCON_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA1_FALCON		302U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_UART_FST_MIPI_CAL */
+#define TEGRA234_CLK_AON_UART_FST_MIPI_CAL	303U
+/** @brief GPU system clock */
+#define TEGRA234_CLK_GPUSYS			304U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C5 */
+#define TEGRA234_CLK_I2C5			305U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SE switch divider free running clk */
+#define TEGRA234_CLK_FR_SE			306U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_CPU_NIC switch divider output */
+#define TEGRA234_CLK_BPMP_CPU_NIC		307U
+/** @brief output of gate CLK_ENB_BPMP_CPU */
+#define TEGRA234_CLK_BPMP_CPU			308U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_TSC switch divider output */
+#define TEGRA234_CLK_TSC			309U
+/** @brief output of mem pll A sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMC */
+#define TEGRA234_CLK_EMCSA_MPLL			310U
+/** @brief output of mem pll B sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMCSB */
+#define TEGRA234_CLK_EMCSB_MPLL			311U
+/** @brief output of mem pll C sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMCSC */
+#define TEGRA234_CLK_EMCSC_MPLL			312U
+/** @brief output of mem pll D sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMCSD */
+#define TEGRA234_CLK_EMCSD_MPLL			313U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC_BASE */
+#define TEGRA234_CLK_PLLC			314U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC2_BASE */
+#define TEGRA234_CLK_PLLC2			315U
+/** @brief CLK_RST_CONTROLLER_TSC_HS_SUPER_CLK_DIVIDER skip divider output */
+#define TEGRA234_CLK_TSC_REF			317U
+/** @brief Dummy clock to ensure minimum SoC voltage for fuse burning */
+#define TEGRA234_CLK_FUSE_BURN			318U
+/** @brief GBE PLL */
+#define TEGRA234_CLK_PLLGBE			319U
+/** @brief GBE PLL hardware power sequencer */
+#define TEGRA234_CLK_PLLGBE_HPS			320U
+/** @brief output of EMC CDB side A fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSA_EMC			321U
+/** @brief output of EMC CDB side B fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSB_EMC			322U
+/** @brief output of EMC CDB side C fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSC_EMC			323U
+/** @brief output of EMC CDB side D fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSD_EMC			324U
+/** @brief PLLE hardware power sequencer (overrides 'manual' programming of PLL) */
+#define TEGRA234_CLK_PLLE_HPS			326U
+/** @brief CLK_ENB_PLLREFE_OUT gate output */
+#define TEGRA234_CLK_PLLREFE_VCOOUT_GATED	327U
+/** @brief TEGRA234_CLK_SOR_SAFE clk source (PLLP_OUT0 divided by 17) */
+#define TEGRA234_CLK_PLLP_DIV17			328U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SOC_THERM switch divider output */
+#define TEGRA234_CLK_SOC_THERM			329U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_TSENSE switch divider output */
+#define TEGRA234_CLK_TSENSE			330U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SEU1 switch divider free running clk */
+#define TEGRA234_CLK_FR_SEU1			331U
+/** @brief NAFLL clock source for OFA */
+#define TEGRA234_CLK_NAFLL_OFA			333U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_OFA switch divider output */
+#define TEGRA234_CLK_OFA			334U
+/** @brief NAFLL clock source for SEU1 */
+#define TEGRA234_CLK_NAFLL_SEU1			335U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SEU1 switch divider gated output */
+#define TEGRA234_CLK_SEU1			336U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI4 */
+#define TEGRA234_CLK_SPI4			337U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI5 */
+#define TEGRA234_CLK_SPI5			338U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DCE_CPU_NIC */
+#define TEGRA234_CLK_DCE_CPU_NIC		339U
+/** @brief output of divider CLK_RST_CONTROLLER_DCE_NIC_RATE */
+#define TEGRA234_CLK_DCE_NIC			340U
+/** @brief NAFLL clock source for DCE */
+#define TEGRA234_CLK_NAFLL_DCE			341U
+/** @brief Monitored branch of MPHY_L0_RX_ANA clock */
+#define TEGRA234_CLK_MPHY_L0_RX_ANA_M		342U
+/** @brief Monitored branch of MPHY_L1_RX_ANA clock */
+#define TEGRA234_CLK_MPHY_L1_RX_ANA_M		343U
+/** @brief ungated version of TX symbol clock after fixed 1/2 divider */
+#define TEGRA234_CLK_MPHY_L0_TX_PRE_SYMB	344U
+/** @brief output of divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_TX_LS_SYMB */
+#define TEGRA234_CLK_MPHY_L0_TX_LS_SYMB_DIV	345U
+/** @brief output of gate CLK_ENB_MPHY_L0_TX_2X_SYMB */
+#define TEGRA234_CLK_MPHY_L0_TX_2X_SYMB		346U
+/** @brief output of SW_MPHY_L0_TX_HS_SYMB divider in CLK_RST_CONTROLLER_MPHY_L0_TX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_TX_HS_SYMB_DIV	347U
+/** @brief output of SW_MPHY_L0_TX_LS_3XBIT divider in CLK_RST_CONTROLLER_MPHY_L0_TX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_TX_LS_3XBIT_DIV	348U
+/** @brief LS/HS divider mux SW_MPHY_L0_TX_LS_HS_SEL in CLK_RST_CONTROLLER_MPHY_L0_TX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_TX_MUX_SYMB_DIV	349U
+/** @brief Monitored branch of MPHY_L0_TX_SYMB clock */
+#define TEGRA234_CLK_MPHY_L0_TX_SYMB_M		350U
+/** @brief output of divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_RX_LS_SYMB */
+#define TEGRA234_CLK_MPHY_L0_RX_LS_SYMB_DIV	351U
+/** @brief output of SW_MPHY_L0_RX_HS_SYMB divider in CLK_RST_CONTROLLER_MPHY_L0_RX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_RX_HS_SYMB_DIV	352U
+/** @brief output of SW_MPHY_L0_RX_LS_BIT divider in  CLK_RST_CONTROLLER_MPHY_L0_RX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_RX_LS_BIT_DIV	353U
+/** @brief LS/HS divider mux SW_MPHY_L0_RX_LS_HS_SEL in CLK_RST_CONTROLLER_MPHY_L0_RX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_RX_MUX_SYMB_DIV	354U
+/** @brief Monitored branch of MPHY_L0_RX_SYMB clock */
+#define TEGRA234_CLK_MPHY_L0_RX_SYMB_M		355U
 /** @brief Monitored branch of MBGE0 RX input clock */
 #define TEGRA234_CLK_MGBE0_RX_INPUT_M		357U
 /** @brief Monitored branch of MBGE1 RX input clock */
@@ -194,6 +670,14 @@
 #define TEGRA234_CLK_MGBE2_RX_PCS_M		363U
 /** @brief Monitored branch of MGBE3 RX PCS mux output */
 #define TEGRA234_CLK_MGBE3_RX_PCS_M		364U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH1 */
+#define TEGRA234_CLK_TACH1			365U
+/** @brief GBE_UPHY_MGBES_APP_CLK switch divider gated output */
+#define TEGRA234_CLK_MGBES_APP			366U
+/** @brief Logical clk for setting GBE UPHY PLL2 TX_REF rate */
+#define TEGRA234_CLK_UPHY_GBE_PLL2_TX_REF	367U
+/** @brief Logical clk for setting GBE UPHY PLL2 XDIG rate */
+#define TEGRA234_CLK_UPHY_GBE_PLL2_XDIG		368U
 /** @brief RX PCS clock recovered from MGBE0 lane input */
 #define TEGRA234_CLK_MGBE0_RX_PCS_INPUT		369U
 /** @brief RX PCS clock recovered from MGBE1 lane input */
@@ -230,6 +714,8 @@
 #define TEGRA234_CLK_MGBE1_MAC_DIVIDER		385U
 /** @brief GBE_UPHY_MGBE1_MAC_CLK gate output */
 #define TEGRA234_CLK_MGBE1_MAC			386U
+/** @brief GBE_UPHY_MGBE1_MACSEC_CLK gate output */
+#define TEGRA234_CLK_MGBE1_MACSEC		387U
 /** @brief GBE_UPHY_MGBE1_EEE_PCS_CLK gate output */
 #define TEGRA234_CLK_MGBE1_EEE_PCS		388U
 /** @brief GBE_UPHY_MGBE1_APP_CLK gate output */
@@ -246,6 +732,8 @@
 #define TEGRA234_CLK_MGBE2_MAC_DIVIDER		394U
 /** @brief GBE_UPHY_MGBE2_MAC_CLK gate output */
 #define TEGRA234_CLK_MGBE2_MAC			395U
+/** @brief GBE_UPHY_MGBE2_MACSEC_CLK gate output */
+#define TEGRA234_CLK_MGBE2_MACSEC		396U
 /** @brief GBE_UPHY_MGBE2_EEE_PCS_CLK gate output */
 #define TEGRA234_CLK_MGBE2_EEE_PCS		397U
 /** @brief GBE_UPHY_MGBE2_APP_CLK gate output */
@@ -270,9 +758,146 @@
 #define TEGRA234_CLK_MGBE3_APP			407U
 /** @brief GBE_UPHY_MGBE3_PTP_REF_CLK divider gated output */
 #define TEGRA234_CLK_MGBE3_PTP_REF		408U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_RX_BYP switch divider output */
+#define TEGRA234_CLK_GBE_RX_BYP_REF		409U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_PLL0_MGMT switch divider output */
+#define TEGRA234_CLK_GBE_PLL0_MGMT		410U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_PLL1_MGMT switch divider output */
+#define TEGRA234_CLK_GBE_PLL1_MGMT		411U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_PLL2_MGMT switch divider output */
+#define TEGRA234_CLK_GBE_PLL2_MGMT		412U
+/** @brief output of gate CLK_ENB_EQOS_MACSEC_RX */
+#define TEGRA234_CLK_EQOS_MACSEC_RX		413U
+/** @brief output of gate CLK_ENB_EQOS_MACSEC_TX */
+#define TEGRA234_CLK_EQOS_MACSEC_TX		414U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK divider ungated output */
+#define TEGRA234_CLK_EQOS_TX_DIVIDER		415U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_NVHS_PLL1_MGMT switch divider output */
+#define TEGRA234_CLK_NVHS_PLL1_MGMT		416U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EMCHUB mux output */
+#define TEGRA234_CLK_EMCHUB			417U
+/** @brief clock recovered from I2S7 input */
+#define TEGRA234_CLK_I2S7_SYNC_INPUT		418U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S7 */
+#define TEGRA234_CLK_SYNC_I2S7			419U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S7 */
+#define TEGRA234_CLK_I2S7			420U
+/** @brief Monitored output of I2S7 pad macro mux */
+#define TEGRA234_CLK_I2S7_PAD_M			421U
+/** @brief clock recovered from I2S8 input */
+#define TEGRA234_CLK_I2S8_SYNC_INPUT		422U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S8 */
+#define TEGRA234_CLK_SYNC_I2S8			423U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S8 */
+#define TEGRA234_CLK_I2S8			424U
+/** @brief Monitored output of I2S8 pad macro mux */
+#define TEGRA234_CLK_I2S8_PAD_M			425U
+/** @brief NAFLL clock source for GPU GPC0 */
+#define TEGRA234_CLK_NAFLL_GPC0			426U
+/** @brief NAFLL clock source for GPU GPC1 */
+#define TEGRA234_CLK_NAFLL_GPC1			427U
+/** @brief NAFLL clock source for GPU SYSCLK */
+#define TEGRA234_CLK_NAFLL_GPUSYS		428U
+/** @brief NAFLL clock source for CPU cluster 0 DSUCLK */
+#define TEGRA234_CLK_NAFLL_DSU0			429U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER0_DSU		429U
+/** @brief NAFLL clock source for CPU cluster 1 DSUCLK */
+#define TEGRA234_CLK_NAFLL_DSU1			430U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER1_DSU		430U
+/** @brief NAFLL clock source for CPU cluster 2 DSUCLK */
+#define TEGRA234_CLK_NAFLL_DSU2			431U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER2_DSU		431U
+/** @brief output of gate CLK_ENB_SCE_CPU */
+#define TEGRA234_CLK_SCE_CPU			432U
+/** @brief output of gate CLK_ENB_RCE_CPU */
+#define TEGRA234_CLK_RCE_CPU			433U
+/** @brief output of gate CLK_ENB_DCE_CPU */
+#define TEGRA234_CLK_DCE_CPU			434U
+/** @brief DSIPLL VCO output */
+#define TEGRA234_CLK_DSIPLL_VCO			435U
+/** @brief DSIPLL SYNC_CLKOUTP/N differential output */
+#define TEGRA234_CLK_DSIPLL_CLKOUTPN		436U
+/** @brief DSIPLL SYNC_CLKOUTA output */
+#define TEGRA234_CLK_DSIPLL_CLKOUTA		437U
+/** @brief SPPLL0 VCO output */
+#define TEGRA234_CLK_SPPLL0_VCO			438U
+/** @brief SPPLL0 SYNC_CLKOUTP/N differential output */
+#define TEGRA234_CLK_SPPLL0_CLKOUTPN		439U
+/** @brief SPPLL0 SYNC_CLKOUTA output */
+#define TEGRA234_CLK_SPPLL0_CLKOUTA		440U
+/** @brief SPPLL0 SYNC_CLKOUTB output */
+#define TEGRA234_CLK_SPPLL0_CLKOUTB		441U
+/** @brief SPPLL0 CLKOUT_DIVBY10 output */
+#define TEGRA234_CLK_SPPLL0_DIV10		442U
+/** @brief SPPLL0 CLKOUT_DIVBY25 output */
+#define TEGRA234_CLK_SPPLL0_DIV25		443U
+/** @brief SPPLL0 CLKOUT_DIVBY27P/N differential output */
+#define TEGRA234_CLK_SPPLL0_DIV27PN		444U
+/** @brief SPPLL1 VCO output */
+#define TEGRA234_CLK_SPPLL1_VCO			445U
+/** @brief SPPLL1 SYNC_CLKOUTP/N differential output */
+#define TEGRA234_CLK_SPPLL1_CLKOUTPN		446U
+/** @brief SPPLL1 CLKOUT_DIVBY27P/N differential output */
+#define TEGRA234_CLK_SPPLL1_DIV27PN		447U
+/** @brief VPLL0 reference clock */
+#define TEGRA234_CLK_VPLL0_REF			448U
+/** @brief VPLL0 */
+#define TEGRA234_CLK_VPLL0			449U
+/** @brief VPLL1 */
+#define TEGRA234_CLK_VPLL1			450U
+/** @brief NVDISPLAY_P0_CLK reference select */
+#define TEGRA234_CLK_NVDISPLAY_P0_REF		451U
+/** @brief RG0_PCLK */
+#define TEGRA234_CLK_RG0			452U
+/** @brief RG1_PCLK */
+#define TEGRA234_CLK_RG1			453U
+/** @brief DISPPLL output */
+#define TEGRA234_CLK_DISPPLL			454U
+/** @brief DISPHUBPLL output */
+#define TEGRA234_CLK_DISPHUBPLL			455U
+/** @brief CLK_RST_CONTROLLER_DSI_LP_SWITCH_DIVIDER switch divider output (dsi_lp_clk) */
+#define TEGRA234_CLK_DSI_LP			456U
 /** @brief CLK_RST_CONTROLLER_AZA2XBITCLK_OUT_SWITCH_DIVIDER switch divider output (aza_2xbitclk) */
 #define TEGRA234_CLK_AZA_2XBIT			457U
 /** @brief aza_2xbitclk / 2 (aza_bitclk) */
 #define TEGRA234_CLK_AZA_BIT			458U
+/** @brief SWITCH_DSI_CORE_PIXEL_MISC_DSI_CORE_CLK_SRC switch output (dsi_core_clk) */
+#define TEGRA234_CLK_DSI_CORE			459U
+/** @brief Output of mux controlled by pkt_wr_fifo_signal from dsi (dsi_pixel_clk) */
+#define TEGRA234_CLK_DSI_PIXEL			460U
+/** @brief Output of mux controlled by disp_2clk_sor0_dp_sel (pre_sor0_clk) */
+#define TEGRA234_CLK_PRE_SOR0			461U
+/** @brief Output of mux controlled by disp_2clk_sor1_dp_sel (pre_sor1_clk) */
+#define TEGRA234_CLK_PRE_SOR1			462U
+/** @brief CLK_RST_CONTROLLER_LINK_REFCLK_CFG__0 output */
+#define TEGRA234_CLK_DP_LINK_REF		463U
+/** @brief Link clock input from DP macro brick PLL */
+#define TEGRA234_CLK_SOR_LINKA_INPUT		464U
+/** @brief SOR AFIFO clock outut */
+#define TEGRA234_CLK_SOR_LINKA_AFIFO		465U
+/** @brief Monitored branch of linka_afifo_clk */
+#define TEGRA234_CLK_SOR_LINKA_AFIFO_M		466U
+/** @brief Monitored branch of rg0_pclk */
+#define TEGRA234_CLK_RG0_M			467U
+/** @brief Monitored branch of rg1_pclk */
+#define TEGRA234_CLK_RG1_M			468U
+/** @brief Monitored branch of sor0_clk */
+#define TEGRA234_CLK_SOR0_M			469U
+/** @brief Monitored branch of sor1_clk */
+#define TEGRA234_CLK_SOR1_M			470U
+/** @brief EMC PLLHUB output */
+#define TEGRA234_CLK_PLLHUB			471U
+/** @brief output of fixed (DIV2) MC HUB divider */
+#define TEGRA234_CLK_MCHUB			472U
+/** @brief output of divider controlled by EMC side A MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSA_MC			473U
+/** @brief output of divider controlled by EMC side B MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSB_MC			474U
+/** @brief output of divider controlled by EMC side C MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSC_MC			475U
+/** @brief output of divider controlled by EMC side D MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSD_MC			476U
+
+/** @} */
 
 #endif
diff --git a/dts/include/dt-bindings/firmware/imx/rsrc.h b/dts/include/dt-bindings/firmware/imx/rsrc.h
index 1675de05ad..1a8c025d77 100644
--- a/dts/include/dt-bindings/firmware/imx/rsrc.h
+++ b/dts/include/dt-bindings/firmware/imx/rsrc.h
@@ -13,30 +13,30 @@
  * never be changed or removed (only added to at the end of the list).
  */
 
-#define IMX_SC_R_A53			0
-#define IMX_SC_R_A53_0			1
-#define IMX_SC_R_A53_1			2
-#define IMX_SC_R_A53_2			3
-#define IMX_SC_R_A53_3			4
-#define IMX_SC_R_A72			5
-#define IMX_SC_R_A72_0			6
-#define IMX_SC_R_A72_1			7
-#define IMX_SC_R_A72_2			8
-#define IMX_SC_R_A72_3			9
+#define IMX_SC_R_AP_0			0
+#define IMX_SC_R_AP_0_0			1
+#define IMX_SC_R_AP_0_1			2
+#define IMX_SC_R_AP_0_2			3
+#define IMX_SC_R_AP_0_3			4
+#define IMX_SC_R_AP_1			5
+#define IMX_SC_R_AP_1_0			6
+#define IMX_SC_R_AP_1_1			7
+#define IMX_SC_R_AP_1_2			8
+#define IMX_SC_R_AP_1_3			9
 #define IMX_SC_R_CCI			10
 #define IMX_SC_R_DB			11
 #define IMX_SC_R_DRC_0			12
 #define IMX_SC_R_DRC_1			13
 #define IMX_SC_R_GIC_SMMU		14
-#define IMX_SC_R_IRQSTR_M4_0		15
-#define IMX_SC_R_IRQSTR_M4_1		16
-#define IMX_SC_R_SMMU			17
-#define IMX_SC_R_GIC			18
+#define IMX_SC_R_IRQSTR_MCU_0		15
+#define IMX_SC_R_IRQSTR_MCU_1		16
+#define IMX_SC_R_SMMU_0			17
+#define IMX_SC_R_GIC_0			18
 #define IMX_SC_R_DC_0_BLIT0		19
 #define IMX_SC_R_DC_0_BLIT1		20
 #define IMX_SC_R_DC_0_BLIT2		21
 #define IMX_SC_R_DC_0_BLIT_OUT		22
-#define IMX_SC_R_PERF			23
+#define IMX_SC_R_PERF_0			23
 #define IMX_SC_R_USB_1_PHY		24
 #define IMX_SC_R_DC_0_WARP		25
 #define IMX_SC_R_V2X_MU_0		26
@@ -56,11 +56,14 @@
 #define IMX_SC_R_V2X_MU_3		40
 #define IMX_SC_R_V2X_MU_4		41
 #define IMX_SC_R_DC_1_WARP		42
+#define IMX_SC_R_STM			43
 #define IMX_SC_R_SECVIO			44
 #define IMX_SC_R_DC_1_VIDEO0		45
 #define IMX_SC_R_DC_1_VIDEO1		46
 #define IMX_SC_R_DC_1_FRAC0		47
+#define IMX_SC_R_V2X			48
 #define IMX_SC_R_DC_1			49
+#define IMX_SC_R_UNUSED14		50
 #define IMX_SC_R_DC_1_PLL_0		51
 #define IMX_SC_R_DC_1_PLL_1		52
 #define IMX_SC_R_SPI_0			53
@@ -151,10 +154,10 @@
 #define IMX_SC_R_DMA_1_CH29		137
 #define IMX_SC_R_DMA_1_CH30		138
 #define IMX_SC_R_DMA_1_CH31		139
-#define IMX_SC_R_UNUSED1		140
-#define IMX_SC_R_UNUSED2		141
-#define IMX_SC_R_UNUSED3		142
-#define IMX_SC_R_UNUSED4		143
+#define IMX_SC_R_V2X_PID0		140
+#define IMX_SC_R_V2X_PID1		141
+#define IMX_SC_R_V2X_PID2		142
+#define IMX_SC_R_V2X_PID3		143
 #define IMX_SC_R_GPU_0_PID0		144
 #define IMX_SC_R_GPU_0_PID1		145
 #define IMX_SC_R_GPU_0_PID2		146
@@ -183,7 +186,7 @@
 #define IMX_SC_R_PCIE_B			169
 #define IMX_SC_R_SATA_0			170
 #define IMX_SC_R_SERDES_1		171
-#define IMX_SC_R_HSIO_GPIO		172
+#define IMX_SC_R_HSIO_GPIO_0		172
 #define IMX_SC_R_MATCH_15		173
 #define IMX_SC_R_MATCH_16		174
 #define IMX_SC_R_MATCH_17		175
@@ -250,15 +253,15 @@
 #define IMX_SC_R_ROM_0			236
 #define IMX_SC_R_FSPI_0			237
 #define IMX_SC_R_FSPI_1			238
-#define IMX_SC_R_IEE			239
-#define IMX_SC_R_IEE_R0			240
-#define IMX_SC_R_IEE_R1			241
-#define IMX_SC_R_IEE_R2			242
-#define IMX_SC_R_IEE_R3			243
-#define IMX_SC_R_IEE_R4			244
-#define IMX_SC_R_IEE_R5			245
-#define IMX_SC_R_IEE_R6			246
-#define IMX_SC_R_IEE_R7			247
+#define IMX_SC_R_IEE_0			239
+#define IMX_SC_R_IEE_0_R0		240
+#define IMX_SC_R_IEE_0_R1		241
+#define IMX_SC_R_IEE_0_R2		242
+#define IMX_SC_R_IEE_0_R3		243
+#define IMX_SC_R_IEE_0_R4		244
+#define IMX_SC_R_IEE_0_R5		245
+#define IMX_SC_R_IEE_0_R6		246
+#define IMX_SC_R_IEE_0_R7		247
 #define IMX_SC_R_SDHC_0			248
 #define IMX_SC_R_SDHC_1			249
 #define IMX_SC_R_SDHC_2			250
@@ -289,46 +292,50 @@
 #define IMX_SC_R_LVDS_2_PWM_0		275
 #define IMX_SC_R_LVDS_2_I2C_0		276
 #define IMX_SC_R_LVDS_2_I2C_1		277
-#define IMX_SC_R_M4_0_PID0		278
-#define IMX_SC_R_M4_0_PID1		279
-#define IMX_SC_R_M4_0_PID2		280
-#define IMX_SC_R_M4_0_PID3		281
-#define IMX_SC_R_M4_0_PID4		282
-#define IMX_SC_R_M4_0_RGPIO		283
-#define IMX_SC_R_M4_0_SEMA42		284
-#define IMX_SC_R_M4_0_TPM		285
-#define IMX_SC_R_M4_0_PIT		286
-#define IMX_SC_R_M4_0_UART		287
-#define IMX_SC_R_M4_0_I2C		288
-#define IMX_SC_R_M4_0_INTMUX		289
-#define IMX_SC_R_M4_0_MU_0B		292
-#define IMX_SC_R_M4_0_MU_0A0		293
-#define IMX_SC_R_M4_0_MU_0A1		294
-#define IMX_SC_R_M4_0_MU_0A2		295
-#define IMX_SC_R_M4_0_MU_0A3		296
-#define IMX_SC_R_M4_0_MU_1A		297
-#define IMX_SC_R_M4_1_PID0		298
-#define IMX_SC_R_M4_1_PID1		299
-#define IMX_SC_R_M4_1_PID2		300
-#define IMX_SC_R_M4_1_PID3		301
-#define IMX_SC_R_M4_1_PID4		302
-#define IMX_SC_R_M4_1_RGPIO		303
-#define IMX_SC_R_M4_1_SEMA42		304
-#define IMX_SC_R_M4_1_TPM		305
-#define IMX_SC_R_M4_1_PIT		306
-#define IMX_SC_R_M4_1_UART		307
-#define IMX_SC_R_M4_1_I2C		308
-#define IMX_SC_R_M4_1_INTMUX		309
-#define IMX_SC_R_M4_1_MU_0B		312
-#define IMX_SC_R_M4_1_MU_0A0		313
-#define IMX_SC_R_M4_1_MU_0A1		314
-#define IMX_SC_R_M4_1_MU_0A2		315
-#define IMX_SC_R_M4_1_MU_0A3		316
-#define IMX_SC_R_M4_1_MU_1A		317
+#define IMX_SC_R_MCU_0_PID0		278
+#define IMX_SC_R_MCU_0_PID1		279
+#define IMX_SC_R_MCU_0_PID2		280
+#define IMX_SC_R_MCU_0_PID3		281
+#define IMX_SC_R_MCU_0_PID4		282
+#define IMX_SC_R_MCU_0_RGPIO		283
+#define IMX_SC_R_MCU_0_SEMA42		284
+#define IMX_SC_R_MCU_0_TPM		285
+#define IMX_SC_R_MCU_0_PIT		286
+#define IMX_SC_R_MCU_0_UART		287
+#define IMX_SC_R_MCU_0_I2C		288
+#define IMX_SC_R_MCU_0_INTMUX		289
+#define IMX_SC_R_ENET_0_A0		290
+#define IMX_SC_R_ENET_0_A1		291
+#define IMX_SC_R_MCU_0_MU_0B		292
+#define IMX_SC_R_MCU_0_MU_0A0		293
+#define IMX_SC_R_MCU_0_MU_0A1		294
+#define IMX_SC_R_MCU_0_MU_0A2		295
+#define IMX_SC_R_MCU_0_MU_0A3		296
+#define IMX_SC_R_MCU_0_MU_1A		297
+#define IMX_SC_R_MCU_1_PID0		298
+#define IMX_SC_R_MCU_1_PID1		299
+#define IMX_SC_R_MCU_1_PID2		300
+#define IMX_SC_R_MCU_1_PID3		301
+#define IMX_SC_R_MCU_1_PID4		302
+#define IMX_SC_R_MCU_1_RGPIO		303
+#define IMX_SC_R_MCU_1_SEMA42		304
+#define IMX_SC_R_MCU_1_TPM		305
+#define IMX_SC_R_MCU_1_PIT		306
+#define IMX_SC_R_MCU_1_UART		307
+#define IMX_SC_R_MCU_1_I2C		308
+#define IMX_SC_R_MCU_1_INTMUX		309
+#define IMX_SC_R_UNUSED17		310
+#define IMX_SC_R_UNUSED18		311
+#define IMX_SC_R_MCU_1_MU_0B		312
+#define IMX_SC_R_MCU_1_MU_0A0		313
+#define IMX_SC_R_MCU_1_MU_0A1		314
+#define IMX_SC_R_MCU_1_MU_0A2		315
+#define IMX_SC_R_MCU_1_MU_0A3		316
+#define IMX_SC_R_MCU_1_MU_1A		317
 #define IMX_SC_R_SAI_0			318
 #define IMX_SC_R_SAI_1			319
 #define IMX_SC_R_SAI_2			320
-#define IMX_SC_R_IRQSTR_SCU2		321
+#define IMX_SC_R_IRQSTR_AP_0		321
 #define IMX_SC_R_IRQSTR_DSP		322
 #define IMX_SC_R_ELCDIF_PLL		323
 #define IMX_SC_R_OCRAM			324
@@ -373,33 +380,33 @@
 #define IMX_SC_R_VPU_PID5		363
 #define IMX_SC_R_VPU_PID6		364
 #define IMX_SC_R_VPU_PID7		365
-#define IMX_SC_R_VPU_UART		366
-#define IMX_SC_R_VPUCORE		367
-#define IMX_SC_R_VPUCORE_0		368
-#define IMX_SC_R_VPUCORE_1		369
-#define IMX_SC_R_VPUCORE_2		370
-#define IMX_SC_R_VPUCORE_3		371
+#define IMX_SC_R_ENET_0_A2		366
+#define IMX_SC_R_ENET_1_A0		367
+#define IMX_SC_R_ENET_1_A1		368
+#define IMX_SC_R_ENET_1_A2		369
+#define IMX_SC_R_ENET_1_A3		370
+#define IMX_SC_R_ENET_1_A4		371
 #define IMX_SC_R_DMA_4_CH0		372
 #define IMX_SC_R_DMA_4_CH1		373
 #define IMX_SC_R_DMA_4_CH2		374
 #define IMX_SC_R_DMA_4_CH3		375
 #define IMX_SC_R_DMA_4_CH4		376
-#define IMX_SC_R_ISI_CH0		377
-#define IMX_SC_R_ISI_CH1		378
-#define IMX_SC_R_ISI_CH2		379
-#define IMX_SC_R_ISI_CH3		380
-#define IMX_SC_R_ISI_CH4		381
-#define IMX_SC_R_ISI_CH5		382
-#define IMX_SC_R_ISI_CH6		383
-#define IMX_SC_R_ISI_CH7		384
-#define IMX_SC_R_MJPEG_DEC_S0		385
-#define IMX_SC_R_MJPEG_DEC_S1		386
-#define IMX_SC_R_MJPEG_DEC_S2		387
-#define IMX_SC_R_MJPEG_DEC_S3		388
-#define IMX_SC_R_MJPEG_ENC_S0		389
-#define IMX_SC_R_MJPEG_ENC_S1		390
-#define IMX_SC_R_MJPEG_ENC_S2		391
-#define IMX_SC_R_MJPEG_ENC_S3		392
+#define IMX_SC_R_ISI_0_CH0		377
+#define IMX_SC_R_ISI_0_CH1		378
+#define IMX_SC_R_ISI_0_CH2		379
+#define IMX_SC_R_ISI_0_CH3		380
+#define IMX_SC_R_ISI_0_CH4		381
+#define IMX_SC_R_ISI_0_CH5		382
+#define IMX_SC_R_ISI_0_CH6		383
+#define IMX_SC_R_ISI_0_CH7		384
+#define IMX_SC_R_MJPEG_0_DEC_S0		385
+#define IMX_SC_R_MJPEG_0_DEC_S1		386
+#define IMX_SC_R_MJPEG_0_DEC_S2		387
+#define IMX_SC_R_MJPEG_0_DEC_S3		388
+#define IMX_SC_R_MJPEG_0_ENC_S0		389
+#define IMX_SC_R_MJPEG_0_ENC_S1		390
+#define IMX_SC_R_MJPEG_0_ENC_S2		391
+#define IMX_SC_R_MJPEG_0_ENC_S3		392
 #define IMX_SC_R_MIPI_0			393
 #define IMX_SC_R_MIPI_0_PWM_0		394
 #define IMX_SC_R_MIPI_0_I2C_0		395
@@ -514,11 +521,11 @@
 #define IMX_SC_R_SECO_MU_3		504
 #define IMX_SC_R_SECO_MU_4		505
 #define IMX_SC_R_HDMI_RX_PWM_0		506
-#define IMX_SC_R_A35			507
-#define IMX_SC_R_A35_0			508
-#define IMX_SC_R_A35_1			509
-#define IMX_SC_R_A35_2			510
-#define IMX_SC_R_A35_3			511
+#define IMX_SC_R_AP_2			507
+#define IMX_SC_R_AP_2_0			508
+#define IMX_SC_R_AP_2_1			509
+#define IMX_SC_R_AP_2_2			510
+#define IMX_SC_R_AP_2_3			511
 #define IMX_SC_R_DSP			512
 #define IMX_SC_R_DSP_RAM		513
 #define IMX_SC_R_CAAM_JR1_OUT		514
@@ -539,8 +546,8 @@
 #define IMX_SC_R_BOARD_R5		529
 #define IMX_SC_R_BOARD_R6		530
 #define IMX_SC_R_BOARD_R7		531
-#define IMX_SC_R_MJPEG_DEC_MP		532
-#define IMX_SC_R_MJPEG_ENC_MP		533
+#define IMX_SC_R_MJPEG_0_DEC_MP		532
+#define IMX_SC_R_MJPEG_0_ENC_MP		533
 #define IMX_SC_R_VPU_TS_0		534
 #define IMX_SC_R_VPU_MU_0		535
 #define IMX_SC_R_VPU_MU_1		536
@@ -573,6 +580,105 @@
 #define IMX_SC_PM_CLK_BYPASS		4	/* Bypass clock */
 
 /*
+ * Compatibility defines for sc_rsrc_t
+ */
+#define IMX_SC_R_A35			IMX_SC_R_AP_2
+#define IMX_SC_R_A35_0			IMX_SC_R_AP_2_0
+#define IMX_SC_R_A35_1			IMX_SC_R_AP_2_1
+#define IMX_SC_R_A35_2			IMX_SC_R_AP_2_2
+#define IMX_SC_R_A35_3			IMX_SC_R_AP_2_3
+#define IMX_SC_R_A53			IMX_SC_R_AP_0
+#define IMX_SC_R_A53_0			IMX_SC_R_AP_0_0
+#define IMX_SC_R_A53_1			IMX_SC_R_AP_0_1
+#define IMX_SC_R_A53_2			IMX_SC_R_AP_0_2
+#define IMX_SC_R_A53_3			IMX_SC_R_AP_0_3
+#define IMX_SC_R_A72			IMX_SC_R_AP_1
+#define IMX_SC_R_A72_0			IMX_SC_R_AP_1_0
+#define IMX_SC_R_A72_1			IMX_SC_R_AP_1_1
+#define IMX_SC_R_A72_2			IMX_SC_R_AP_1_2
+#define IMX_SC_R_A72_3			IMX_SC_R_AP_1_3
+#define IMX_SC_R_GIC			IMX_SC_R_GIC_0
+#define IMX_SC_R_HSIO_GPIO		IMX_SC_R_HSIO_GPIO_0
+#define IMX_SC_R_IEE			IMX_SC_R_IEE_0
+#define IMX_SC_R_IEE_R0			IMX_SC_R_IEE_0_R0
+#define IMX_SC_R_IEE_R1			IMX_SC_R_IEE_0_R1
+#define IMX_SC_R_IEE_R2			IMX_SC_R_IEE_0_R2
+#define IMX_SC_R_IEE_R3			IMX_SC_R_IEE_0_R3
+#define IMX_SC_R_IEE_R4			IMX_SC_R_IEE_0_R4
+#define IMX_SC_R_IEE_R5			IMX_SC_R_IEE_0_R5
+#define IMX_SC_R_IEE_R6			IMX_SC_R_IEE_0_R6
+#define IMX_SC_R_IEE_R7			IMX_SC_R_IEE_0_R7
+#define IMX_SC_R_IRQSTR_M4_0		IMX_SC_R_IRQSTR_MCU_0
+#define IMX_SC_R_IRQSTR_M4_1		IMX_SC_R_IRQSTR_MCU_1
+#define IMX_SC_R_IRQSTR_SCU2		IMX_SC_R_IRQSTR_AP_0
+#define IMX_SC_R_ISI_CH0		IMX_SC_R_ISI_0_CH0
+#define IMX_SC_R_ISI_CH1		IMX_SC_R_ISI_0_CH1
+#define IMX_SC_R_ISI_CH2		IMX_SC_R_ISI_0_CH2
+#define IMX_SC_R_ISI_CH3		IMX_SC_R_ISI_0_CH3
+#define IMX_SC_R_ISI_CH4		IMX_SC_R_ISI_0_CH4
+#define IMX_SC_R_ISI_CH5		IMX_SC_R_ISI_0_CH5
+#define IMX_SC_R_ISI_CH6		IMX_SC_R_ISI_0_CH6
+#define IMX_SC_R_ISI_CH7		IMX_SC_R_ISI_0_CH7
+#define IMX_SC_R_M4_0_I2C		IMX_SC_R_MCU_0_I2C
+#define IMX_SC_R_M4_0_INTMUX		IMX_SC_R_MCU_0_INTMUX
+#define IMX_SC_R_M4_0_MU_0A0		IMX_SC_R_MCU_0_MU_0A0
+#define IMX_SC_R_M4_0_MU_0A1		IMX_SC_R_MCU_0_MU_0A1
+#define IMX_SC_R_M4_0_MU_0A2		IMX_SC_R_MCU_0_MU_0A2
+#define IMX_SC_R_M4_0_MU_0A3		IMX_SC_R_MCU_0_MU_0A3
+#define IMX_SC_R_M4_0_MU_0B		IMX_SC_R_MCU_0_MU_0B
+#define IMX_SC_R_M4_0_MU_1A		IMX_SC_R_MCU_0_MU_1A
+#define IMX_SC_R_M4_0_PID0		IMX_SC_R_MCU_0_PID0
+#define IMX_SC_R_M4_0_PID1		IMX_SC_R_MCU_0_PID1
+#define IMX_SC_R_M4_0_PID2		IMX_SC_R_MCU_0_PID2
+#define IMX_SC_R_M4_0_PID3		IMX_SC_R_MCU_0_PID3
+#define IMX_SC_R_M4_0_PID4		IMX_SC_R_MCU_0_PID4
+#define IMX_SC_R_M4_0_PIT		IMX_SC_R_MCU_0_PIT
+#define IMX_SC_R_M4_0_RGPIO		IMX_SC_R_MCU_0_RGPIO
+#define IMX_SC_R_M4_0_SEMA42		IMX_SC_R_MCU_0_SEMA42
+#define IMX_SC_R_M4_0_TPM		IMX_SC_R_MCU_0_TPM
+#define IMX_SC_R_M4_0_UART		IMX_SC_R_MCU_0_UART
+#define IMX_SC_R_M4_1_I2C		IMX_SC_R_MCU_1_I2C
+#define IMX_SC_R_M4_1_INTMUX		IMX_SC_R_MCU_1_INTMUX
+#define IMX_SC_R_M4_1_MU_0A0		IMX_SC_R_MCU_1_MU_0A0
+#define IMX_SC_R_M4_1_MU_0A1		IMX_SC_R_MCU_1_MU_0A1
+#define IMX_SC_R_M4_1_MU_0A2		IMX_SC_R_MCU_1_MU_0A2
+#define IMX_SC_R_M4_1_MU_0A3		IMX_SC_R_MCU_1_MU_0A3
+#define IMX_SC_R_M4_1_MU_0B		IMX_SC_R_MCU_1_MU_0B
+#define IMX_SC_R_M4_1_MU_1A		IMX_SC_R_MCU_1_MU_1A
+#define IMX_SC_R_M4_1_PID0		IMX_SC_R_MCU_1_PID0
+#define IMX_SC_R_M4_1_PID1		IMX_SC_R_MCU_1_PID1
+#define IMX_SC_R_M4_1_PID2		IMX_SC_R_MCU_1_PID2
+#define IMX_SC_R_M4_1_PID3		IMX_SC_R_MCU_1_PID3
+#define IMX_SC_R_M4_1_PID4		IMX_SC_R_MCU_1_PID4
+#define IMX_SC_R_M4_1_PIT		IMX_SC_R_MCU_1_PIT
+#define IMX_SC_R_M4_1_RGPIO		IMX_SC_R_MCU_1_RGPIO
+#define IMX_SC_R_M4_1_SEMA42		IMX_SC_R_MCU_1_SEMA42
+#define IMX_SC_R_M4_1_TPM		IMX_SC_R_MCU_1_TPM
+#define IMX_SC_R_M4_1_UART		IMX_SC_R_MCU_1_UART
+#define IMX_SC_R_MJPEG_DEC_MP		IMX_SC_R_MJPEG_0_DEC_MP
+#define IMX_SC_R_MJPEG_DEC_S0		IMX_SC_R_MJPEG_0_DEC_S0
+#define IMX_SC_R_MJPEG_DEC_S1		IMX_SC_R_MJPEG_0_DEC_S1
+#define IMX_SC_R_MJPEG_DEC_S2		IMX_SC_R_MJPEG_0_DEC_S2
+#define IMX_SC_R_MJPEG_DEC_S3		IMX_SC_R_MJPEG_0_DEC_S3
+#define IMX_SC_R_MJPEG_ENC_MP		IMX_SC_R_MJPEG_0_ENC_MP
+#define IMX_SC_R_MJPEG_ENC_S0		IMX_SC_R_MJPEG_0_ENC_S0
+#define IMX_SC_R_MJPEG_ENC_S1		IMX_SC_R_MJPEG_0_ENC_S1
+#define IMX_SC_R_MJPEG_ENC_S2		IMX_SC_R_MJPEG_0_ENC_S2
+#define IMX_SC_R_MJPEG_ENC_S3		IMX_SC_R_MJPEG_0_ENC_S3
+#define IMX_SC_R_PERF			IMX_SC_R_PERF_0
+#define IMX_SC_R_SMMU			IMX_SC_R_SMMU_0
+#define IMX_SC_R_VPU_UART		IMX_SC_R_ENET_0_A2
+#define IMX_SC_R_VPUCORE		IMX_SC_R_ENET_1_A0
+#define IMX_SC_R_VPUCORE_0		IMX_SC_R_ENET_1_A1
+#define IMX_SC_R_VPUCORE_1		IMX_SC_R_ENET_1_A2
+#define IMX_SC_R_VPUCORE_2		IMX_SC_R_ENET_1_A3
+#define IMX_SC_R_VPUCORE_3		IMX_SC_R_ENET_1_A4
+#define IMX_SC_R_UNUSED1		IMX_SC_R_V2X_PID0
+#define IMX_SC_R_UNUSED2		IMX_SC_R_V2X_PID1
+#define IMX_SC_R_UNUSED3		IMX_SC_R_V2X_PID2
+#define IMX_SC_R_UNUSED4		IMX_SC_R_V2X_PID3
+
+/*
  * Defines for SC CONTROL
  */
 #define IMX_SC_C_TEMP				0
@@ -637,6 +743,10 @@
 #define IMX_SC_C_INTF_SEL			59
 #define IMX_SC_C_RXC_DLY			60
 #define IMX_SC_C_TIMER_SEL			61
-#define IMX_SC_C_LAST				62
+#define IMX_SC_C_MISC0				62
+#define IMX_SC_C_MISC1				63
+#define IMX_SC_C_MISC2				64
+#define IMX_SC_C_MISC3				65
+#define IMX_SC_C_LAST				66
 
 #endif /* __DT_BINDINGS_RSCRC_IMX_H */
diff --git a/dts/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h b/dts/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h
index 9426f27a19..09fd169ad1 100644
--- a/dts/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h
+++ b/dts/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h
@@ -6,62 +6,58 @@
 #ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H
 #define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H
 
-#ifndef PM8350_SID
-#define PM8350_SID					1
-#endif
-
 /* ADC channels for PM8350_ADC for PMIC7 */
-#define PM8350_ADC7_REF_GND			(PM8350_SID << 8 | 0x0)
-#define PM8350_ADC7_1P25VREF			(PM8350_SID << 8 | 0x01)
-#define PM8350_ADC7_VREF_VADC			(PM8350_SID << 8 | 0x02)
-#define PM8350_ADC7_DIE_TEMP			(PM8350_SID << 8 | 0x03)
-
-#define PM8350_ADC7_AMUX_THM1			(PM8350_SID << 8 | 0x04)
-#define PM8350_ADC7_AMUX_THM2			(PM8350_SID << 8 | 0x05)
-#define PM8350_ADC7_AMUX_THM3			(PM8350_SID << 8 | 0x06)
-#define PM8350_ADC7_AMUX_THM4			(PM8350_SID << 8 | 0x07)
-#define PM8350_ADC7_AMUX_THM5			(PM8350_SID << 8 | 0x08)
-#define PM8350_ADC7_GPIO1			(PM8350_SID << 8 | 0x0a)
-#define PM8350_ADC7_GPIO2			(PM8350_SID << 8 | 0x0b)
-#define PM8350_ADC7_GPIO3			(PM8350_SID << 8 | 0x0c)
-#define PM8350_ADC7_GPIO4			(PM8350_SID << 8 | 0x0d)
+#define PM8350_ADC7_REF_GND(sid)			((sid) << 8 | 0x0)
+#define PM8350_ADC7_1P25VREF(sid)			((sid) << 8 | 0x01)
+#define PM8350_ADC7_VREF_VADC(sid)			((sid) << 8 | 0x02)
+#define PM8350_ADC7_DIE_TEMP(sid)			((sid) << 8 | 0x03)
+
+#define PM8350_ADC7_AMUX_THM1(sid)			((sid) << 8 | 0x04)
+#define PM8350_ADC7_AMUX_THM2(sid)			((sid) << 8 | 0x05)
+#define PM8350_ADC7_AMUX_THM3(sid)			((sid) << 8 | 0x06)
+#define PM8350_ADC7_AMUX_THM4(sid)			((sid) << 8 | 0x07)
+#define PM8350_ADC7_AMUX_THM5(sid)			((sid) << 8 | 0x08)
+#define PM8350_ADC7_GPIO1(sid)				((sid) << 8 | 0x0a)
+#define PM8350_ADC7_GPIO2(sid)				((sid) << 8 | 0x0b)
+#define PM8350_ADC7_GPIO3(sid)				((sid) << 8 | 0x0c)
+#define PM8350_ADC7_GPIO4(sid)				((sid) << 8 | 0x0d)
 
 /* 30k pull-up1 */
-#define PM8350_ADC7_AMUX_THM1_30K_PU		(PM8350_SID << 8 | 0x24)
-#define PM8350_ADC7_AMUX_THM2_30K_PU		(PM8350_SID << 8 | 0x25)
-#define PM8350_ADC7_AMUX_THM3_30K_PU		(PM8350_SID << 8 | 0x26)
-#define PM8350_ADC7_AMUX_THM4_30K_PU		(PM8350_SID << 8 | 0x27)
-#define PM8350_ADC7_AMUX_THM5_30K_PU		(PM8350_SID << 8 | 0x28)
-#define PM8350_ADC7_GPIO1_30K_PU		(PM8350_SID << 8 | 0x2a)
-#define PM8350_ADC7_GPIO2_30K_PU		(PM8350_SID << 8 | 0x2b)
-#define PM8350_ADC7_GPIO3_30K_PU		(PM8350_SID << 8 | 0x2c)
-#define PM8350_ADC7_GPIO4_30K_PU		(PM8350_SID << 8 | 0x2d)
+#define PM8350_ADC7_AMUX_THM1_30K_PU(sid)		((sid) << 8 | 0x24)
+#define PM8350_ADC7_AMUX_THM2_30K_PU(sid)		((sid) << 8 | 0x25)
+#define PM8350_ADC7_AMUX_THM3_30K_PU(sid)		((sid) << 8 | 0x26)
+#define PM8350_ADC7_AMUX_THM4_30K_PU(sid)		((sid) << 8 | 0x27)
+#define PM8350_ADC7_AMUX_THM5_30K_PU(sid)		((sid) << 8 | 0x28)
+#define PM8350_ADC7_GPIO1_30K_PU(sid)			((sid) << 8 | 0x2a)
+#define PM8350_ADC7_GPIO2_30K_PU(sid)			((sid) << 8 | 0x2b)
+#define PM8350_ADC7_GPIO3_30K_PU(sid)			((sid) << 8 | 0x2c)
+#define PM8350_ADC7_GPIO4_30K_PU(sid)			((sid) << 8 | 0x2d)
 
 /* 100k pull-up2 */
-#define PM8350_ADC7_AMUX_THM1_100K_PU		(PM8350_SID << 8 | 0x44)
-#define PM8350_ADC7_AMUX_THM2_100K_PU		(PM8350_SID << 8 | 0x45)
-#define PM8350_ADC7_AMUX_THM3_100K_PU		(PM8350_SID << 8 | 0x46)
-#define PM8350_ADC7_AMUX_THM4_100K_PU		(PM8350_SID << 8 | 0x47)
-#define PM8350_ADC7_AMUX_THM5_100K_PU		(PM8350_SID << 8 | 0x48)
-#define PM8350_ADC7_GPIO1_100K_PU		(PM8350_SID << 8 | 0x4a)
-#define PM8350_ADC7_GPIO2_100K_PU		(PM8350_SID << 8 | 0x4b)
-#define PM8350_ADC7_GPIO3_100K_PU		(PM8350_SID << 8 | 0x4c)
-#define PM8350_ADC7_GPIO4_100K_PU		(PM8350_SID << 8 | 0x4d)
+#define PM8350_ADC7_AMUX_THM1_100K_PU(sid)		((sid) << 8 | 0x44)
+#define PM8350_ADC7_AMUX_THM2_100K_PU(sid)		((sid) << 8 | 0x45)
+#define PM8350_ADC7_AMUX_THM3_100K_PU(sid)		((sid) << 8 | 0x46)
+#define PM8350_ADC7_AMUX_THM4_100K_PU(sid)		((sid) << 8 | 0x47)
+#define PM8350_ADC7_AMUX_THM5_100K_PU(sid)		((sid) << 8 | 0x48)
+#define PM8350_ADC7_GPIO1_100K_PU(sid)			((sid) << 8 | 0x4a)
+#define PM8350_ADC7_GPIO2_100K_PU(sid)			((sid) << 8 | 0x4b)
+#define PM8350_ADC7_GPIO3_100K_PU(sid)			((sid) << 8 | 0x4c)
+#define PM8350_ADC7_GPIO4_100K_PU(sid)			((sid) << 8 | 0x4d)
 
 /* 400k pull-up3 */
-#define PM8350_ADC7_AMUX_THM1_400K_PU		(PM8350_SID << 8 | 0x64)
-#define PM8350_ADC7_AMUX_THM2_400K_PU		(PM8350_SID << 8 | 0x65)
-#define PM8350_ADC7_AMUX_THM3_400K_PU		(PM8350_SID << 8 | 0x66)
-#define PM8350_ADC7_AMUX_THM4_400K_PU		(PM8350_SID << 8 | 0x67)
-#define PM8350_ADC7_AMUX_THM5_400K_PU		(PM8350_SID << 8 | 0x68)
-#define PM8350_ADC7_GPIO1_400K_PU		(PM8350_SID << 8 | 0x6a)
-#define PM8350_ADC7_GPIO2_400K_PU		(PM8350_SID << 8 | 0x6b)
-#define PM8350_ADC7_GPIO3_400K_PU		(PM8350_SID << 8 | 0x6c)
-#define PM8350_ADC7_GPIO4_400K_PU		(PM8350_SID << 8 | 0x6d)
+#define PM8350_ADC7_AMUX_THM1_400K_PU(sid)		((sid) << 8 | 0x64)
+#define PM8350_ADC7_AMUX_THM2_400K_PU(sid)		((sid) << 8 | 0x65)
+#define PM8350_ADC7_AMUX_THM3_400K_PU(sid)		((sid) << 8 | 0x66)
+#define PM8350_ADC7_AMUX_THM4_400K_PU(sid)		((sid) << 8 | 0x67)
+#define PM8350_ADC7_AMUX_THM5_400K_PU(sid)		((sid) << 8 | 0x68)
+#define PM8350_ADC7_GPIO1_400K_PU(sid)			((sid) << 8 | 0x6a)
+#define PM8350_ADC7_GPIO2_400K_PU(sid)			((sid) << 8 | 0x6b)
+#define PM8350_ADC7_GPIO3_400K_PU(sid)			((sid) << 8 | 0x6c)
+#define PM8350_ADC7_GPIO4_400K_PU(sid)			((sid) << 8 | 0x6d)
 
 /* 1/3 Divider */
-#define PM8350_ADC7_GPIO4_DIV3			(PM8350_SID << 8 | 0x8d)
+#define PM8350_ADC7_GPIO4_DIV3(sid)			((sid) << 8 | 0x8d)
 
-#define PM8350_ADC7_VPH_PWR			(PM8350_SID << 8 | 0x8e)
+#define PM8350_ADC7_VPH_PWR(sid)			((sid) << 8 | 0x8e)
 
 #endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H */
diff --git a/dts/include/dt-bindings/input/linux-event-codes.h b/dts/include/dt-bindings/input/linux-event-codes.h
index 7ad931a329..022a520e31 100644
--- a/dts/include/dt-bindings/input/linux-event-codes.h
+++ b/dts/include/dt-bindings/input/linux-event-codes.h
@@ -614,6 +614,9 @@
 #define KEY_KBD_LAYOUT_NEXT	0x248	/* AC Next Keyboard Layout Select */
 #define KEY_EMOJI_PICKER	0x249	/* Show/hide emoji picker (HUTRR101) */
 #define KEY_DICTATE		0x24a	/* Start or Stop Voice Dictation Session (HUTRR99) */
+#define KEY_CAMERA_ACCESS_ENABLE	0x24b	/* Enables programmatic access to camera devices. (HUTRR72) */
+#define KEY_CAMERA_ACCESS_DISABLE	0x24c	/* Disables programmatic access to camera devices. (HUTRR72) */
+#define KEY_CAMERA_ACCESS_TOGGLE	0x24d	/* Toggles the current state of the camera access control. (HUTRR72) */
 
 #define KEY_BRIGHTNESS_MIN		0x250	/* Set Brightness to Minimum */
 #define KEY_BRIGHTNESS_MAX		0x251	/* Set Brightness to Maximum */
diff --git a/dts/include/dt-bindings/mailbox/mediatek,mt8188-gce.h b/dts/include/dt-bindings/mailbox/mediatek,mt8188-gce.h
new file mode 100644
index 0000000000..119865787b
--- /dev/null
+++ b/dts/include/dt-bindings/mailbox/mediatek,mt8188-gce.h
@@ -0,0 +1,967 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ *
+ */
+#ifndef _DT_BINDINGS_GCE_MT8188_H
+#define _DT_BINDINGS_GCE_MT8188_H
+
+#define CMDQ_THR_PRIO_LOWEST		0
+#define CMDQ_THR_PRIO_1			1
+#define CMDQ_THR_PRIO_2			2
+#define CMDQ_THR_PRIO_3			3
+#define CMDQ_THR_PRIO_4			4
+#define CMDQ_THR_PRIO_5			5
+#define CMDQ_THR_PRIO_6			6
+#define CMDQ_THR_PRIO_HIGHEST		7
+
+#define SUBSYS_1400XXXX                 0
+#define SUBSYS_1401XXXX			1
+#define SUBSYS_1402XXXX			2
+#define SUBSYS_1c00XXXX			3
+#define SUBSYS_1c01XXXX			4
+#define SUBSYS_1c02XXXX			5
+#define SUBSYS_1c10XXXX			6
+#define SUBSYS_1c11XXXX			7
+#define SUBSYS_1c12XXXX			8
+#define SUBSYS_14f0XXXX			9
+#define SUBSYS_14f1XXXX			10
+#define SUBSYS_14f2XXXX			11
+#define SUBSYS_1800XXXX			12
+#define SUBSYS_1801XXXX			13
+#define SUBSYS_1802XXXX			14
+#define SUBSYS_1803XXXX			15
+#define SUBSYS_1032XXXX			16
+#define SUBSYS_1033XXXX			17
+#define SUBSYS_1600XXXX			18
+#define SUBSYS_1601XXXX			19
+#define SUBSYS_14e0XXXX			20
+#define SUBSYS_1c20XXXX			21
+#define SUBSYS_1c30XXXX			22
+#define SUBSYS_1c40XXXX			23
+#define SUBSYS_1c50XXXX			24
+#define SUBSYS_1c60XXXX			25
+#define SUBSYS_NO_SUPPORT		99
+
+#define CMDQ_EVENT_IMG_SOF				0
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_0		1
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_1		2
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_2		3
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_3		4
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_4		5
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_5		6
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_6		7
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_7		8
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_8		9
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_9		10
+#define CMDQ_EVENT_IMG_TRAW0_DMA_ERROR_INT		11
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_0		12
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_1		13
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_2		14
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_3		15
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_4		16
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_5		17
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_6		18
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_7		19
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_8		20
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_9		21
+#define CMDQ_EVENT_IMG_TRAW1_DMA_ERROR_INT		22
+#define CMDQ_EVENT_IMG_ADL_RESERVED			23
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_0		24
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_1		25
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_2		26
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_3		27
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_4		28
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_5		29
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_6		30
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_7		31
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_8		32
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_9		33
+#define CMDQ_EVENT_IMG_DIP_DMA_ERR			34
+#define CMDQ_EVENT_IMG_DIP_NR_DMA_ERR			35
+#define CMDQ_EVENT_DIP_DUMMY_0				36
+#define CMDQ_EVENT_DIP_DUMMY_1				37
+#define CMDQ_EVENT_DIP_DUMMY_2				38
+#define CMDQ_EVENT_IMG_WPE_EIS_GCE_FRAME_DONE	39
+#define CMDQ_EVENT_IMG_WPE_EIS_DONE_SYNC_OUT	40
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_0	41
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_1	42
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_2	43
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_3	44
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_4	45
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_5	46
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_6	47
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_7	48
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_8	49
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_9	50
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_0	51
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_1	52
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_2	53
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_3	54
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_4	55
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_5	56
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_6	57
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_7	58
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_8	59
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_9	60
+#define CMDQ_EVENT_IMG_PQDIP_A_DMA_ERR		61
+#define CMDQ_EVENT_WPE0_DUMMY_0			62
+#define CMDQ_EVENT_WPE0_DUMMY_1			63
+#define CMDQ_EVENT_WPE0_DUMMY_2			64
+#define CMDQ_EVENT_IMG_WPE_TNR_GCE_FRAME_DONE	65
+#define CMDQ_EVENT_IMG_WPE_TNR_DONE_SYNC_OUT	66
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_0	67
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_1	68
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_2	69
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_3	70
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_4	71
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_5	72
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_6	73
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_7	74
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_8	75
+#define CMDQ_EVENT_IMG_WPE_TNR_CQ_THR_DONE_9	76
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_0	77
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_1	78
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_2	79
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_3	80
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_4	81
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_5	82
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_6	83
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_7	84
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_8	85
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_9	86
+#define CMDQ_EVENT_IMG_PQDIP_B_DMA_ERR		87
+#define CMDQ_EVENT_WPE1_DUMMY_0			88
+#define CMDQ_EVENT_WPE1_DUMMY_1			89
+#define CMDQ_EVENT_WPE1_DUMMY_2			90
+#define CMDQ_EVENT_IMG_WPE_LITE_GCE_FRAME_DONE	91
+#define CMDQ_EVENT_IMG_WPE_LITE_DONE_SYNC_OUT	92
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_0	93
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_1	94
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_2	95
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_3	96
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_4	97
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_5	98
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_6	99
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_7	100
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_8	101
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_9	102
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_0	103
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_1	104
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_2	105
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_3	106
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_4	107
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_5	108
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_6	109
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_7	110
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_8	111
+#define CMDQ_EVENT_IMG_XTRAW_CQ_THR_DONE_9	112
+#define CMDQ_EVENT_IMG_XTRAW_DMA_ERR_EVENT	113
+#define CMDQ_EVENT_WPE2_DUMMY_0			114
+#define CMDQ_EVENT_WPE2_DUMMY_1			115
+#define CMDQ_EVENT_WPE2_DUMMY_2			116
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_DUMMY		117
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_FDVT_DONE	118
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_ME_DONE	119
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_DVS_DONE	120
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_DVP_DONE	121
+#define CMDQ_EVENT_FDVT1_RESERVED		122
+#define CMDQ_EVENT_IMG_ENG_EVENT		123
+#define CMDQ_EVENT_CAMSUBA_SW_PASS1_DONE		129
+#define CMDQ_EVENT_CAMSUBB_SW_PASS1_DONE		130
+#define CMDQ_EVENT_CAMSUBC_SW_PASS1_DONE		131
+#define CMDQ_EVENT_GCAMSV_A_1_SW_PASS1_DONE		132
+#define CMDQ_EVENT_GCAMSV_A_2_SW_PASS1_DONE		133
+#define CMDQ_EVENT_GCAMSV_B_1_SW_PASS1_DONE		134
+#define CMDQ_EVENT_GCAMSV_B_2_SW_PASS1_DONE		135
+#define CMDQ_EVENT_GCAMSV_C_1_SW_PASS1_DONE		136
+#define CMDQ_EVENT_GCAMSV_C_2_SW_PASS1_DONE		137
+#define CMDQ_EVENT_GCAMSV_D_1_SW_PASS1_DONE		138
+#define CMDQ_EVENT_GCAMSV_D_2_SW_PASS1_DONE		139
+#define CMDQ_EVENT_GCAMSV_E_1_SW_PASS1_DONE		140
+#define CMDQ_EVENT_GCAMSV_E_2_SW_PASS1_DONE		141
+#define CMDQ_EVENT_GCAMSV_F_1_SW_PASS1_DONE		142
+#define CMDQ_EVENT_GCAMSV_F_2_SW_PASS1_DONE		143
+#define CMDQ_EVENT_GCAMSV_G_1_SW_PASS1_DONE		144
+#define CMDQ_EVENT_GCAMSV_G_2_SW_PASS1_DONE		145
+#define CMDQ_EVENT_GCAMSV_H_1_SW_PASS1_DONE		146
+#define CMDQ_EVENT_GCAMSV_H_2_SW_PASS1_DONE		147
+#define CMDQ_EVENT_GCAMSV_I_1_SW_PASS1_DONE		148
+#define CMDQ_EVENT_GCAMSV_I_2_SW_PASS1_DONE		149
+#define CMDQ_EVENT_GCAMSV_J_1_SW_PASS1_DONE		150
+#define CMDQ_EVENT_GCAMSV_J_2_SW_PASS1_DONE		151
+#define CMDQ_EVENT_MRAW_0_SW_PASS1_DONE			152
+#define CMDQ_EVENT_MRAW_1_SW_PASS1_DONE			153
+#define CMDQ_EVENT_MRAW_2_SW_PASS1_DONE			154
+#define CMDQ_EVENT_MRAW_3_SW_PASS1_DONE			155
+#define CMDQ_EVENT_SENINF_CAM0_FIFO_FULL		156
+#define CMDQ_EVENT_SENINF_CAM1_FIFO_FULL		157
+#define CMDQ_EVENT_SENINF_CAM2_FIFO_FULL		158
+#define CMDQ_EVENT_SENINF_CAM3_FIFO_FULL		159
+#define CMDQ_EVENT_SENINF_CAM4_FIFO_FULL		160
+#define CMDQ_EVENT_SENINF_CAM5_FIFO_FULL		161
+#define CMDQ_EVENT_SENINF_CAM6_FIFO_FULL		162
+#define CMDQ_EVENT_SENINF_CAM7_FIFO_FULL		163
+#define CMDQ_EVENT_SENINF_CAM8_FIFO_FULL		164
+#define CMDQ_EVENT_SENINF_CAM9_FIFO_FULL		165
+#define CMDQ_EVENT_SENINF_CAM10_FIFO_FULL		166
+#define CMDQ_EVENT_SENINF_CAM11_FIFO_FULL		167
+#define CMDQ_EVENT_SENINF_CAM12_FIFO_FULL		168
+#define CMDQ_EVENT_SENINF_CAM13_FIFO_FULL		169
+#define CMDQ_EVENT_SENINF_CAM14_FIFO_FULL		170
+#define CMDQ_EVENT_SENINF_CAM15_FIFO_FULL		171
+#define CMDQ_EVENT_SENINF_CAM16_FIFO_FULL		172
+#define CMDQ_EVENT_SENINF_CAM17_FIFO_FULL		173
+#define CMDQ_EVENT_SENINF_CAM18_FIFO_FULL		174
+#define CMDQ_EVENT_SENINF_CAM19_FIFO_FULL		175
+#define CMDQ_EVENT_SENINF_CAM20_FIFO_FULL		176
+#define CMDQ_EVENT_SENINF_CAM21_FIFO_FULL		177
+#define CMDQ_EVENT_SENINF_CAM22_FIFO_FULL		178
+#define CMDQ_EVENT_SENINF_CAM23_FIFO_FULL		179
+#define CMDQ_EVENT_SENINF_CAM24_FIFO_FULL		180
+#define CMDQ_EVENT_SENINF_CAM25_FIFO_FULL		181
+#define CMDQ_EVENT_SENINF_CAM26_FIFO_FULL		182
+#define CMDQ_EVENT_TG_OVRUN_MRAW0_INT			183
+#define CMDQ_EVENT_TG_OVRUN_MRAW1_INT			184
+#define CMDQ_EVENT_TG_OVRUN_MRAW2_INT			185
+#define CMDQ_EVENT_TG_OVRUN_MRAW3_INT			186
+#define CMDQ_EVENT_DMA_R1_ERROR_MRAW0_INT		187
+#define CMDQ_EVENT_DMA_R1_ERROR_MRAW1_INT		188
+#define CMDQ_EVENT_DMA_R1_ERROR_MRAW2_INT		189
+#define CMDQ_EVENT_DMA_R1_ERROR_MRAW3_INT		190
+#define CMDQ_EVENT_PDA0_IRQO_EVENT_DONE_D1		191
+#define CMDQ_EVENT_PDA1_IRQO_EVENT_DONE_D1		192
+#define CMDQ_EVENT_CAM_SUBA_TG_INT1				193
+#define CMDQ_EVENT_CAM_SUBA_TG_INT2				194
+#define CMDQ_EVENT_CAM_SUBA_TG_INT3				195
+#define CMDQ_EVENT_CAM_SUBA_TG_INT4				196
+#define CMDQ_EVENT_CAM_SUBB_TG_INT1				197
+#define CMDQ_EVENT_CAM_SUBB_TG_INT2				198
+#define CMDQ_EVENT_CAM_SUBB_TG_INT3				199
+#define CMDQ_EVENT_CAM_SUBB_TG_INT4				200
+#define CMDQ_EVENT_CAM_SUBC_TG_INT1				201
+#define CMDQ_EVENT_CAM_SUBC_TG_INT2				202
+#define CMDQ_EVENT_CAM_SUBC_TG_INT3				203
+#define CMDQ_EVENT_CAM_SUBC_TG_INT4				204
+#define CMDQ_EVENT_CAM_SUBA_IMGO_R1_LOW_LATENCY_LINE_CNT_INT	205
+#define CMDQ_EVENT_CAM_SUBA_YUVO_R1_LOW_LATENCY_LINE_CNT_INT	206
+#define CMDQ_EVENT_CAM_SUBA_YUVO_R3_LOW_LATENCY_LINE_CNT_INT	207
+#define CMDQ_EVENT_CAM_SUBA_DRZS4NO_R1_LOW_LATENCY_LINE_CNT_INT	208
+#define CMDQ_EVENT_CAM_SUBB_IMGO_R1_LOW_LATENCY_LINE_CNT_INT	209
+#define CMDQ_EVENT_CAM_SUBB_YUVO_R1_LOW_LATENCY_LINE_CNT_INT	210
+#define CMDQ_EVENT_CAM_SUBB_YUVO_R3_LOW_LATENCY_LINE_CNT_INT	211
+#define CMDQ_EVENT_CAM_SUBB_DRZS4NO_R1_LOW_LATENCY_LINE_CNT_INT	212
+#define CMDQ_EVENT_CAM_SUBC_IMGO_R1_LOW_LATENCY_LINE_CNT_INT	213
+#define CMDQ_EVENT_CAM_SUBC_YUVO_R1_LOW_LATENCY_LINE_CNT_INT	214
+#define CMDQ_EVENT_CAM_SUBC_YUVO_R3_LOW_LATENCY_LINE_CNT_INT	215
+#define CMDQ_EVENT_CAM_SUBC_DRZS4NO_R1_LOW_LATENCY_LINE_CNT_INT	216
+#define CMDQ_EVENT_RAW_SEL_SOF_SUBA				217
+#define CMDQ_EVENT_RAW_SEL_SOF_SUBB				218
+#define CMDQ_EVENT_RAW_SEL_SOF_SUBC				219
+#define CMDQ_EVENT_CAM_SUBA_RING_BUFFER_OVERFLOW_INT_IN		220
+#define CMDQ_EVENT_CAM_SUBB_RING_BUFFER_OVERFLOW_INT_IN		221
+#define CMDQ_EVENT_CAM_SUBC_RING_BUFFER_OVERFLOW_INT_IN		222
+#define CMDQ_EVENT_VPP0_MDP_RDMA_SOF				256
+#define CMDQ_EVENT_VPP0_MDP_FG_SOF				257
+#define CMDQ_EVENT_VPP0_STITCH_SOF				258
+#define CMDQ_EVENT_VPP0_MDP_HDR_SOF				259
+#define CMDQ_EVENT_VPP0_MDP_AAL_SOF				260
+#define CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF			261
+#define CMDQ_EVENT_VPP0_MDP_TDSHP_SOF				262
+#define CMDQ_EVENT_VPP0_DISP_COLOR_SOF				263
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_SOF			264
+#define CMDQ_EVENT_VPP0_VPP_PADDING_IN_PADDING_SOF		265
+#define CMDQ_EVENT_VPP0_MDP_TCC_IN_SOF				266
+#define CMDQ_EVENT_VPP0_MDP_WROT_SOF				267
+#define CMDQ_EVENT_VPP0_WARP0_MMSYS_TOP_RELAY_SOF_PRE		269
+#define CMDQ_EVENT_VPP0_WARP1_MMSYS_TOP_RELAY_SOF_PRE		270
+#define CMDQ_EVENT_VPP0_VPP1_MMSYS_TOP_RELAY_SOF		271
+#define CMDQ_EVENT_VPP0_VPP1_IN_MMSYS_TOP_RELAY_SOF_PRE		272
+#define CMDQ_EVENT_VPP0_DISP_RDMA_SOF				273
+#define CMDQ_EVENT_VPP0_DISP_WDMA_SOF				274
+#define CMDQ_EVENT_VPP0_MDP_HMS_SOF				275
+#define CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE			288
+#define CMDQ_EVENT_VPP0_MDP_FG_TILE_DONE			289
+#define CMDQ_EVENT_VPP0_STITCH_FRAME_DONE			290
+#define CMDQ_EVENT_VPP0_MDP_HDR_FRAME_DONE			291
+#define CMDQ_EVENT_VPP0_MDP_AAL_FRAME_DONE			292
+#define CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE			293
+#define CMDQ_EVENT_VPP0_MDP_TDSHP_FRAME_DONE			294
+#define CMDQ_EVENT_VPP0_DISP_COLOR_FRAME_DONE			295
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_FRAME_DONE		296
+#define CMDQ_EVENT_VPP0_VPP_PADDING_IN_PADDING_FRAME_DONE	297
+#define CMDQ_EVENT_VPP0_MDP_TCC_TCC_FRAME_DONE			298
+#define CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE			299
+#define CMDQ_EVENT_VPP0_DISP_RDMA_FRAME_DONE			305
+#define CMDQ_EVENT_VPP0_DISP_WDMA_FRAME_DONE			306
+#define CMDQ_EVENT_VPP0_MDP_HMS_FRAME_DONE			307
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_0		320
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_1		321
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_2		322
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_3		323
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_4		324
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_5		325
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_6		326
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_7		327
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_8		328
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_9		329
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_10		330
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_11		331
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_12		332
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_13		333
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_14		334
+#define CMDQ_EVENT_VPP0_DISP_MUTEX_STREAM_DONE_15		335
+#define CMDQ_EVENT_VPP0_DISP_RDMA_0_UNDERRUN			336
+#define CMDQ_EVENT_VPP0_DISP_RDMA_1_UNDERRUN			337
+#define CMDQ_EVENT_VPP0_U_MERGE4_UNDERRUN			338
+#define CMDQ_EVENT_VPP0_U_VPP_SPLIT_VIDEO_0_OVERFLOW		339
+#define CMDQ_EVENT_VPP0_U_VPP_SPLIT_VIDEO_1_OVERFLOW		340
+#define CMDQ_EVENT_VPP0_DSI_0_UNDERRUN				341
+#define CMDQ_EVENT_VPP0_DSI_1_UNDERRUN				342
+#define CMDQ_EVENT_VPP0_DP_INTF_0				343
+#define CMDQ_EVENT_VPP0_DP_INTF_1				344
+#define CMDQ_EVENT_VPP0_DPI_0					345
+#define CMDQ_EVENT_VPP0_DPI_1					346
+#define CMDQ_EVENT_VPP0_MDP_RDMA_SW_RST_DONE			352
+#define CMDQ_EVENT_VPP0_MDP_RDMA_PM_VALID_EVENT			353
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_FRAME_RESET_DONE_PULSE	354
+#define CMDQ_EVENT_VPP0_MDP_WROT_SW_RST_DONE			355
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_TARGET_MATCH_0		356
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_TARGET_MATCH_1		357
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_TARGET_MATCH_2		358
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_TARGET_MATCH_3		359
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_TARGET_MATCH_4		360
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_TARGET_MATCH_5		361
+#define CMDQ_EVENT_VPP0_DISP_OVL_NOAFBC_TARGET_MATCH_6		362
+#define CMDQ_EVENT_VPP0_DISP_RDMA_DISP_RDMA_VALID_EVENT		363
+#define CMDQ_EVENT_VPP0_DISP_RDMA_DISP_RDMA_TARGET_LINE_EVENT	364
+#define CMDQ_EVENT_VPP0_DISP_WDMA_SW_RST_DONE			365
+#define CMDQ_EVENT_VPP0_DISP_WDMA_WDMA_VALID_EVENT		366
+#define CMDQ_EVENT_VPP0_DISP_WDMA_WDMA_TARGET_LINE_EVENT	367
+#define CMDQ_EVENT_VPP1_HDMI_META_SOF				384
+#define CMDQ_EVENT_VPP1_DGI_SOF					385
+#define CMDQ_EVENT_VPP1_VPP_SPLIT_SOF				386
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_TCC_SOF			387
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF			388
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF			389
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF			390
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_FG_SOF			391
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_FG_SOF			392
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_FG_SOF			393
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_HDR_SOF			394
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_HDR_SOF			395
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_HDR_SOF			396
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_AAL_SOF			397
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_AAL_SOF			398
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_AAL_SOF			399
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF			400
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF			401
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF			402
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_TDSHP_SOF			403
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_TDSHP_SOF			404
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_TDSHP_SOF			405
+#define CMDQ_EVENT_VPP1_SVPP2_VPP_MERGE_SOF			406
+#define CMDQ_EVENT_VPP1_SVPP3_VPP_MERGE_SOF			407
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_COLOR_SOF			408
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_COLOR_SOF			409
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_COLOR_SOF			410
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_OVL_SOF			411
+#define CMDQ_EVENT_VPP1_SVPP1_VPP_PAD_SOF			412
+#define CMDQ_EVENT_VPP1_SVPP2_VPP_PAD_SOF			413
+#define CMDQ_EVENT_VPP1_SVPP3_VPP_PAD_SOF			414
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF			415
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF			416
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF			417
+#define CMDQ_EVENT_VPP1_VPP0_DL_IRLY_SOF			418
+#define CMDQ_EVENT_VPP1_VPP0_DL_ORLY_SOF			419
+#define CMDQ_EVENT_VPP1_VDO0_DL_ORLY_0_SOF			420
+#define CMDQ_EVENT_VPP1_VDO0_DL_ORLY_1_SOF			421
+#define CMDQ_EVENT_VPP1_VDO1_DL_ORLY_0_SOF			422
+#define CMDQ_EVENT_VPP1_VDO1_DL_ORLY_1_SOF			423
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE		424
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE		425
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE		426
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE		427
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE		428
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE		429
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_OVL_FRAME_DONE		430
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE		431
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE		432
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE		433
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_FG_TILE_DONE			434
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_FG_TILE_DONE			435
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_FG_TILE_DONE			436
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_HDR_FRAME_DONE		437
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_HDR_FRAME_DONE		438
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_HDR_FRAME_DONE		439
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_AAL_FRAME_DONE		440
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_AAL_FRAME_DONE		441
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_AAL_FRAME_DONE		442
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_TDSHP_FRAME_DONE		443
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_TDSHP_FRAME_DONE		444
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_TDSHP_FRAME_DONE		445
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_COLOR_FRAME_DONE		446
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_COLOR_FRAME_DONE		447
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_COLOR_FRAME_DONE		448
+#define CMDQ_EVENT_VPP1_SVPP1_VPP_PAD_FRAME_DONE		449
+#define CMDQ_EVENT_VPP1_SVPP2_VPP_PAD_FRAME_DONE		450
+#define CMDQ_EVENT_VPP1_SVPP3_VPP_PAD_FRAME_DONE		451
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_TCC_FRAME_DONE		452
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_0		456
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_1		457
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_2		458
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_3		459
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_4		460
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_5		461
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_6		462
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_7		463
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_8		464
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_9		465
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_10		466
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_11		467
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_12		468
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_13		469
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_14		470
+#define CMDQ_EVENT_VPP1_MUTEX_STREAM_DONE_GCE_EVENT_15		471
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_0		472
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_1		473
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_2		474
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_3		475
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_4		476
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_5		477
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_6		478
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_7		479
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_8		480
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_9		481
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_10		482
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_11		483
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_12		484
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_13		485
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_14		486
+#define CMDQ_EVENT_VPP1_MUTEX_BUF_UNDERRUN_GCE_EVENT_15		487
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_0			488
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_1			489
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_2			490
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_3			491
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_4			492
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_5			493
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_6			494
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_7			495
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_8			496
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_9			497
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_10			498
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_11			499
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_12			500
+#define CMDQ_EVENT_VPP1_DGI_SYNC_EVENT_13			501
+#define CMDQ_EVENT_VPP1_SVPP3_VPP_MERGE_GCE_EVENT		502
+#define CMDQ_EVENT_VPP1_SVPP2_VPP_MERGE_GCE_EVENT		503
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_OVL_GCE_EVENT			504
+#define CMDQ_EVENT_VPP1_VPP_SPLIT_DGI_GCE_EVENT			505
+#define CMDQ_EVENT_VPP1_VPP_SPLIT_HDMI_GCE_EVENT		506
+#define CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SW_RST_DONE_GCE_EVENT	507
+#define CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SW_RST_DONE_GCE_EVENT	508
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SW_RST_DONE_GCE_EVENT	509
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_OVL_NEW_EVENT_0		510
+#define CMDQ_EVENT_VPP1_SVPP1_MDP_OVL_NEW_EVENT_1		511
+#define CMDQ_EVENT_VDO0_DISP_OVL0_SOF				512
+#define CMDQ_EVENT_VDO0_DISP_WDMA0_SOF				513
+#define CMDQ_EVENT_VDO0_DISP_RDMA0_SOF				514
+#define CMDQ_EVENT_VDO0_DISP_COLOR0_SOF				515
+#define CMDQ_EVENT_VDO0_DISP_CCORR0_SOF				516
+#define CMDQ_EVENT_VDO0_DISP_AAL0_SOF				517
+#define CMDQ_EVENT_VDO0_DISP_GAMMA0_SOF				518
+#define CMDQ_EVENT_VDO0_DISP_DITHER0_SOF			519
+#define CMDQ_EVENT_VDO0_DSI0_SOF				520
+#define CMDQ_EVENT_VDO0_DSC_WRAP0C0_SOF			521
+#define CMDQ_EVENT_VDO0_DISP_OVL1_SOF			522
+#define CMDQ_EVENT_VDO0_DISP_WDMA1_SOF			523
+#define CMDQ_EVENT_VDO0_DISP_RDMA1_SOF			524
+#define CMDQ_EVENT_VDO0_DISP_COLOR1_SOF			525
+#define CMDQ_EVENT_VDO0_DISP_CCORR1_SOF			526
+#define CMDQ_EVENT_VDO0_DISP_AAL1_SOF			527
+#define CMDQ_EVENT_VDO0_DISP_GAMMA1_SOF			528
+#define CMDQ_EVENT_VDO0_DISP_DITHER1_SOF		529
+#define CMDQ_EVENT_VDO0_DSI1_SOF			530
+#define CMDQ_EVENT_VDO0_DSC_WRAP0C1_SOF			531
+#define CMDQ_EVENT_VDO0_VPP_MERGE0_SOF			532
+#define CMDQ_EVENT_VDO0_DP_INTF0_SOF			533
+#define CMDQ_EVENT_VDO0_DISP_DPI0_SOF			534
+#define CMDQ_EVENT_VDO0_DISP_DPI1_SOF			535
+#define CMDQ_EVENT_VDO0_DISP_POSTMASK0_SOF		536
+#define CMDQ_EVENT_VDO0_MDP_WROT0_SOF			537
+#define CMDQ_EVENT_VDO0_DISP_RSZ0_SOF			538
+#define CMDQ_EVENT_VDO0_VPP1_DL_RELAY0_SOF		539
+#define CMDQ_EVENT_VDO0_VPP1_DL_RELAY1_SOF		540
+#define CMDQ_EVENT_VDO0_VDO1_DL_RELAY2_SOF		541
+#define CMDQ_EVENT_VDO0_VDO0_DL_RELAY3_SOF		542
+#define CMDQ_EVENT_VDO0_VDO0_DL_RELAY4_SOF		543
+#define CMDQ_EVENT_VDO0_DISP_PWM0_SOF			544
+#define CMDQ_EVENT_VDO0_DISP_PWM1_SOF			545
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_FRAME_DONE		546
+#define CMDQ_EVENT_VDO0_DISP_WDMA0_FRAME_DONE		547
+#define CMDQ_EVENT_VDO0_DISP_RDMA0_FRAME_DONE		548
+#define CMDQ_EVENT_VDO0_DISP_COLOR0_O_FRAME_DONE	549
+#define CMDQ_EVENT_VDO0_DISP_CCORR0_O_FRAME_DONE	550
+#define CMDQ_EVENT_VDO0_DISP_AAL0_O_FRAME_DONE		551
+#define CMDQ_EVENT_VDO0_DISP_GAMMA0_O_FRAME_DONE	552
+#define CMDQ_EVENT_VDO0_DISP_DITHER0_O_FRAME_DONE	553
+#define CMDQ_EVENT_VDO0_DSI0_FRAME_DONE			554
+#define CMDQ_EVENT_VDO0_DSC_WRAP0_O_FRAME_DONE_0	555
+#define CMDQ_EVENT_VDO0_DISP_OVL1_O_FRAME_DONE		556
+#define CMDQ_EVENT_VDO0_DISP_WDMA1_O_FRAME_DONE		557
+#define CMDQ_EVENT_VDO0_DISP_RDMA1_O_FRAME_DONE		558
+#define CMDQ_EVENT_VDO0_DISP_COLOR1_O_FRAME_DONE	559
+#define CMDQ_EVENT_VDO0_DISP_CCORR1_O_FRAME_DONE	560
+#define CMDQ_EVENT_VDO0_DISP_AAL1_O_FRAME_DONE		561
+#define CMDQ_EVENT_VDO0_DISP_GAMMA1_O_FRAME_DONE	562
+#define CMDQ_EVENT_VDO0_DISP_DITHER1_O_FRAME_DONE	563
+#define CMDQ_EVENT_VDO0_DSI1_FRAME_DONE			564
+#define CMDQ_EVENT_VDO0_DSC_WRAP0_O_FRAME_DONE_1	565
+#define CMDQ_EVENT_VDO0_DP_INTF0_FRAME_DONE		567
+#define CMDQ_EVENT_VDO0_DISP_DPI0_O_FRAME_DONE		568
+#define CMDQ_EVENT_VDO0_DISP_DPI1_O_FRAME_DONE		569
+#define CMDQ_EVENT_VDO0_DISP_POSTMASK0_O_FRAME_DONE	570
+#define CMDQ_EVENT_VDO0_MDP_WROT0_O_FRAME_DONE		571
+#define CMDQ_EVENT_VDO0_DISP_RSZ0_O_FRAME_DONE		572
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0		574
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_1		575
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_2		576
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_3		577
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_4		578
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_5		579
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_6		580
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_7		581
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_8		582
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_9		583
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_10		584
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_11		585
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_12		586
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_13		587
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_14		588
+#define CMDQ_EVENT_VDO0_DISP_STREAM_DONE_15		589
+#define CMDQ_EVENT_VDO0_DISP_RDMA_0_UNDERRUN		590
+#define CMDQ_EVENT_VDO0_DISP_RDMA_1_UNDERRUN		591
+#define CMDQ_EVENT_VDO0_U_MERGE4_UNDERRUN		592
+#define CMDQ_EVENT_VDO0_DSI_0_UNDERRUN			595
+#define CMDQ_EVENT_VDO0_DSI_1_UNDERRUN			596
+#define CMDQ_EVENT_VDO0_DP_INTF_0			597
+#define CMDQ_EVENT_VDO0_DP_INTF_1			598
+#define CMDQ_EVENT_VDO0_DPI_0				599
+#define CMDQ_EVENT_VDO0_DPI_1				600
+#define CMDQ_EVENT_VDO0_DISP_SMIASSERT_ENG_EVENT	606
+#define CMDQ_EVENT_VDO0_DSI0_O_DSI_IRQ_EVENT_MM		607
+#define CMDQ_EVENT_VDO0_DSI0_TE_ENG_EVENT_MM		608
+#define CMDQ_EVENT_VDO0_DSI0_O_DSI_DONE_EVENT_MM	609
+#define CMDQ_EVENT_VDO0_DSI0_O_DSI_VACTL_EVENT_MM	610
+#define CMDQ_EVENT_VDO0_DSI1_O_DSI_IRQ_EVENT_MM		611
+#define CMDQ_EVENT_VDO0_DSI1_TE_ENG_EVENT_MM		612
+#define CMDQ_EVENT_VDO0_DSI1_O_DSI_DONE_EVENT_MM	613
+#define CMDQ_EVENT_VDO0_DSI1_O_DSI_VACTL_EVENT_MM	614
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_DP_VSYNC_START_EVENT_MM		615
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_DP_VSYNC_END_EVENT_MM		616
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_DP_VDE_START_EVENT_MM		617
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_DP_VDE_END_EVENT_MM			618
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_VACT_TARGET_LINE_EVENT_MM		619
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_LAST_SAFE_BLANK_EVENT_MM		620
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_LAST_LINE_EVENT_MM			621
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_TRIGGER_LOOP_CLEAR_EVENT_MM		622
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_TARGET_LINE_0_EVENT_MM		623
+#define CMDQ_EVENT_VDO0_DP_INTF0_O_TARGET_LINE_1_EVENT_MM		624
+#define CMDQ_EVENT_VDO0_DISP_POSTMASK0_O_FRAME_RESET_DONE_PULSE		625
+#define CMDQ_EVENT_VDO0_VPP_MERGE0_O_VPP_MERGE_EVENT			626
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_FRAME_RESET_DONE_PULSE		627
+#define CMDQ_EVENT_VDO0_DISP_RDMA0_O_DISP_RDMA_TARGET_LINE_EVENT	628
+#define CMDQ_EVENT_VDO0_DISP_WDMA0_O_WDMA_TARGET_LINE_EVENT		629
+#define CMDQ_EVENT_VDO0_DISP_WDMA0_O_SW_RST_DONE			630
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_TARGET_MATCH_EVENT_0		631
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_TARGET_MATCH_EVENT_1		632
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_TARGET_MATCH_EVENT_2		633
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_TARGET_MATCH_EVENT_3		634
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_TARGET_MATCH_EVENT_4		635
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_TARGET_MATCH_EVENT_5		636
+#define CMDQ_EVENT_VDO0_DISP_OVL0_O_TARGET_MATCH_EVENT_6		637
+#define CMDQ_EVENT_VDO0_MDP_WROT0_O_SW_RST_DONE				638
+#define CMDQ_EVENT_VDO0_RESERVED					639
+#define CMDQ_EVENT_VDO1_MDP_RDMA0_SOF				640
+#define CMDQ_EVENT_VDO1_MDP_RDMA1_SOF				641
+#define CMDQ_EVENT_VDO1_MDP_RDMA2_SOF				642
+#define CMDQ_EVENT_VDO1_MDP_RDMA3_SOF				643
+#define CMDQ_EVENT_VDO1_MDP_RDMA4_SOF				644
+#define CMDQ_EVENT_VDO1_MDP_RDMA5_SOF				645
+#define CMDQ_EVENT_VDO1_MDP_RDMA6_SOF				646
+#define CMDQ_EVENT_VDO1_MDP_RDMA7_SOF				647
+#define CMDQ_EVENT_VDO1_DISP_PADDING0_SOF			648
+#define CMDQ_EVENT_VDO1_DISP_PADDING1_SOF			649
+#define CMDQ_EVENT_VDO1_DISP_PADDING2_SOF			650
+#define CMDQ_EVENT_VDO1_DISP_PADDING3_SOF			651
+#define CMDQ_EVENT_VDO1_DISP_PADDING4_SOF			652
+#define CMDQ_EVENT_VDO1_DISP_PADDING5_SOF			653
+#define CMDQ_EVENT_VDO1_DISP_PADDING6_SOF			654
+#define CMDQ_EVENT_VDO1_DISP_PADDING7_SOF			655
+#define CMDQ_EVENT_VDO1_DISP_RSZ0_SOF				656
+#define CMDQ_EVENT_VDO1_DISP_RSZ1_SOF				657
+#define CMDQ_EVENT_VDO1_DISP_RSZ2_SOF				658
+#define CMDQ_EVENT_VDO1_DISP_RSZ3_SOF				659
+#define CMDQ_EVENT_VDO1_VPP_MERGE0_SOF				660
+#define CMDQ_EVENT_VDO1_VPP_MERGE1_SOF				661
+#define CMDQ_EVENT_VDO1_VPP_MERGE2_SOF				662
+#define CMDQ_EVENT_VDO1_VPP_MERGE3_SOF				663
+#define CMDQ_EVENT_VDO1_VPP_MERGE4_SOF				664
+#define CMDQ_EVENT_VDO1_VPP2_DL_RELAY_SOF			665
+#define CMDQ_EVENT_VDO1_VPP3_DL_RELAY_SOF			666
+#define CMDQ_EVENT_VDO0_DSC_DL_ASYNC_SOF			667
+#define CMDQ_EVENT_VDO0_MERGE_DL_ASYNC_SOF			668
+#define CMDQ_EVENT_VDO1_OUT_DL_RELAY_SOF			669
+#define CMDQ_EVENT_VDO1_DISP_MIXER_SOF				670
+#define CMDQ_EVENT_VDO1_HDR_VDO_FE0_SOF				671
+#define CMDQ_EVENT_VDO1_HDR_VDO_FE1_SOF				672
+#define CMDQ_EVENT_VDO1_HDR_GFX_FE0_SOF				673
+#define CMDQ_EVENT_VDO1_HDR_GFX_FE1_SOF				674
+#define CMDQ_EVENT_VDO1_HDR_VDO_BE0_SOF				675
+#define CMDQ_EVENT_VDO1_HDR_MLOAD_SOF				676
+#define CMDQ_EVENT_VDO1_DPI0_EXT_SOF				677
+#define CMDQ_EVENT_VDO1_DPI1_EXT_SOF				678
+#define CMDQ_EVENT_VDO1_DP_INTF_EXT_EXT_SOF			679
+#define CMDQ_EVENT_VDO1_MDP_RDMA0_FRAME_DONE		680
+#define CMDQ_EVENT_VDO1_MDP_RDMA1_FRAME_DONE		681
+#define CMDQ_EVENT_VDO1_MDP_RDMA2_FRAME_DONE		682
+#define CMDQ_EVENT_VDO1_MDP_RDMA3_FRAME_DONE		683
+#define CMDQ_EVENT_VDO1_MDP_RDMA4_FRAME_DONE		684
+#define CMDQ_EVENT_VDO1_MDP_RDMA5_FRAME_DONE		685
+#define CMDQ_EVENT_VDO1_MDP_RDMA6_FRAME_DONE		686
+#define CMDQ_EVENT_VDO1_MDP_RDMA7_FRAME_DONE		687
+#define CMDQ_EVENT_VDO1_DISP_PADDING0_FRAME_DONE	688
+#define CMDQ_EVENT_VDO1_DISP_PADDING1_FRAME_DONE	689
+#define CMDQ_EVENT_VDO1_DISP_PADDING2_FRAME_DONE	690
+#define CMDQ_EVENT_VDO1_DISP_PADDING3_FRAME_DONE	691
+#define CMDQ_EVENT_VDO1_DISP_PADDING4_FRAME_DONE	692
+#define CMDQ_EVENT_VDO1_DISP_PADDING5_FRAME_DONE	693
+#define CMDQ_EVENT_VDO1_DISP_PADDING6_FRAME_DONE	694
+#define CMDQ_EVENT_VDO1_DISP_PADDING7_FRAME_DONE	695
+#define CMDQ_EVENT_VDO1_DISP_RSZ0_FRAME_DONE		696
+#define CMDQ_EVENT_VDO1_DISP_RSZ1_FRAME_DONE		697
+#define CMDQ_EVENT_VDO1_DISP_RSZ2_FRAME_DONE		698
+#define CMDQ_EVENT_VDO1_DISP_RSZ3_FRAME_DONE		699
+#define CMDQ_EVENT_VDO1_VPP_MERGE0_FRAME_DONE		700
+#define CMDQ_EVENT_VDO1_VPP_MERGE1_FRAME_DONE		701
+#define CMDQ_EVENT_VDO1_VPP_MERGE2_FRAME_DONE		702
+#define CMDQ_EVENT_VDO1_VPP_MERGE3_FRAME_DONE		703
+#define CMDQ_EVENT_VDO1_VPP_MERGE4_FRAME_DONE		704
+#define CMDQ_EVENT_VDO1_DPI0_FRAME_DONE			705
+#define CMDQ_EVENT_VDO1_DPI1_FRAME_DONE			706
+#define CMDQ_EVENT_VDO1_DP_INTF0_FRAME_DONE		707
+#define CMDQ_EVENT_VDO1_DISP_MIXER_FRAME_DONE_MM	708
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0		709
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_1		710
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_2		711
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_3		712
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_4		713
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_5		714
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_6		715
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_7		716
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_8		717
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_9		718
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_10		719
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_11		720
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_12		721
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_13		722
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_14		723
+#define CMDQ_EVENT_VDO1_STREAM_DONE_ENG_15		724
+#define CMDQ_EVENT_VDO1_DISP_RDMA_0_UNDERRUN		725
+#define CMDQ_EVENT_VDO1_DISP_RDMA_1_UNDERRUN		726
+#define CMDQ_EVENT_VDO1_U_MERGE4_UNDERRUN		727
+#define CMDQ_EVENT_VDO1_U_VPP_SPLIT_VIDEO_0_OVERFLOW	728
+#define CMDQ_EVENT_VDO1_U_VPP_SPLIT_VIDEO_1_OVERFLOW	729
+#define CMDQ_EVENT_VDO1_DSI_0_UNDERRUN			730
+#define CMDQ_EVENT_VDO1_DSI_1_UNDERRUN			731
+#define CMDQ_EVENT_VDO1_DP_INTF_0			732
+#define CMDQ_EVENT_VDO1_DP_INTF_1			733
+#define CMDQ_EVENT_VDO1_DPI_0				734
+#define CMDQ_EVENT_VDO1_DPI_1				735
+#define CMDQ_EVENT_VDO1_MDP_RDMA0_SW_RST_DONE		741
+#define CMDQ_EVENT_VDO1_MDP_RDMA1_SW_RST_DONE		742
+#define CMDQ_EVENT_VDO1_MDP_RDMA2_SW_RST_DONE		743
+#define CMDQ_EVENT_VDO1_MDP_RDMA3_SW_RST_DONE		744
+#define CMDQ_EVENT_VDO1_MDP_RDMA4_SW_RST_DONE		745
+#define CMDQ_EVENT_VDO1_MDP_RDMA5_SW_RST_DONE		746
+#define CMDQ_EVENT_VDO1_MDP_RDMA6_SW_RST_DONE		747
+#define CMDQ_EVENT_VDO1_MDP_RDMA7_SW_RST_DONE		748
+#define CMDQ_EVENT_VDO1_DP0_VDE_END_ENG_EVENT_MM	749
+#define CMDQ_EVENT_VDO1_DP0_VDE_START_ENG_EVENT_MM	750
+#define CMDQ_EVENT_VDO1_DP0_VSYNC_END_ENG_EVENT_MM	751
+#define CMDQ_EVENT_VDO1_DP0_VSYNC_START_ENG_EVENT_MM	752
+#define CMDQ_EVENT_VDO1_DP0_TARGET_LINE_ENG_EVENT_MM	753
+#define CMDQ_EVENT_VDO1_VPP_MERGE0_EVENT		754
+#define CMDQ_EVENT_VDO1_VPP_MERGE1_EVENT		755
+#define CMDQ_EVENT_VDO1_VPP_MERGE2_EVENT		756
+#define CMDQ_EVENT_VDO1_VPP_MERGE3_EVENT		757
+#define CMDQ_EVENT_VDO1_VPP_MERGE4_EVENT		758
+#define CMDQ_EVENT_VDO1_HDMITX_EVENT			759
+#define CMDQ_EVENT_VDO1_HDR_VDO_BE0_ADL_TRIG_EVENT_MM		760
+#define CMDQ_EVENT_VDO1_HDR_GFX_FE1_THDR_ADL_TRIG_EVENT_MM	761
+#define CMDQ_EVENT_VDO1_HDR_GFX_FE1_DM_ADL_TRIG_EVENT_MM	762
+#define CMDQ_EVENT_VDO1_HDR_GFX_FE0_THDR_ADL_TRIG_EVENT_MM	763
+#define CMDQ_EVENT_VDO1_HDR_GFX_FE0_DM_ADL_TRIG_EVENT_MM	764
+#define CMDQ_EVENT_VDO1_HDR_VDO_FE1_ADL_TRIG_EVENT_MM		765
+#define CMDQ_EVENT_VDO1_HDR_VDO_FE1_AD0_TRIG_EVENT_MM		766
+#define CMDQ_EVENT_VDO1_DPI0_TARGET_LINE_1_EVENT_MM		767
+#define CMDQ_EVENT_HANDSHAKE_0		768
+#define CMDQ_EVENT_HANDSHAKE_1		769
+#define CMDQ_EVENT_HANDSHAKE_2		770
+#define CMDQ_EVENT_HANDSHAKE_3		771
+#define CMDQ_EVENT_HANDSHAKE_4		772
+#define CMDQ_EVENT_HANDSHAKE_5		773
+#define CMDQ_EVENT_HANDSHAKE_6		774
+#define CMDQ_EVENT_HANDSHAKE_7		775
+#define CMDQ_EVENT_HANDSHAKE_8		776
+#define CMDQ_EVENT_HANDSHAKE_9		777
+#define CMDQ_EVENT_HANDSHAKE_10		778
+#define CMDQ_EVENT_HANDSHAKE_11		779
+#define CMDQ_EVENT_HANDSHAKE_12		780
+#define CMDQ_EVENT_HANDSHAKE_13		781
+#define CMDQ_EVENT_HANDSHAKE_14		782
+#define CMDQ_EVENT_HANDSHAKE_15		783
+#define CMDQ_EVENT_VDEC_SOC_EVENT_0	800
+#define CMDQ_EVENT_VDEC_SOC_EVENT_1	801
+#define CMDQ_EVENT_VDEC_SOC_EVENT_2	802
+#define CMDQ_EVENT_VDEC_SOC_EVENT_3	803
+#define CMDQ_EVENT_VDEC_SOC_EVENT_4	804
+#define CMDQ_EVENT_VDEC_SOC_EVENT_5	805
+#define CMDQ_EVENT_VDEC_SOC_EVENT_6	806
+#define CMDQ_EVENT_VDEC_SOC_EVENT_7	807
+#define CMDQ_EVENT_VDEC_SOC_EVENT_8	808
+#define CMDQ_EVENT_VDEC_SOC_EVENT_9	809
+#define CMDQ_EVENT_VDEC_SOC_EVENT_10	810
+#define CMDQ_EVENT_VDEC_SOC_EVENT_11	811
+#define CMDQ_EVENT_VDEC_SOC_EVENT_12	812
+#define CMDQ_EVENT_VDEC_SOC_EVENT_13	813
+#define CMDQ_EVENT_VDEC_SOC_EVENT_14	814
+#define CMDQ_EVENT_VDEC_SOC_EVENT_15	815
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_0	832
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_1	833
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_2	834
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_3	835
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_4	836
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_5	837
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_6	838
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_7	839
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_8	840
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_9	841
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_10	842
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_11	843
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_12	844
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_13	845
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_14	846
+#define CMDQ_EVENT_VDEC_CORE0_EVENT_15	847
+#define CMDQ_EVENT_VENC_TOP_VENC_FRAME_DONE		865
+#define CMDQ_EVENT_VENC_TOP_VENC_PAUSE_DONE		866
+#define CMDQ_EVENT_VENC_TOP_JPGENC_DONE			867
+#define CMDQ_EVENT_VENC_TOP_VENC_MB_DONE		868
+#define CMDQ_EVENT_VENC_TOP_VENC_128BYTE_DONE		869
+#define CMDQ_EVENT_VENC_TOP_JPGDEC_DONE			870
+#define CMDQ_EVENT_VENC_TOP_VENC_SLICE_DONE		871
+#define CMDQ_EVENT_VENC_TOP_JPGDEC_INSUFF_DONE		872
+#define CMDQ_EVENT_VENC_TOP_WP_2ND_STAGE_DONE		874
+#define CMDQ_EVENT_VENC_TOP_WP_3RD_STAGE_DONE		875
+#define CMDQ_EVENT_VENC_TOP_PPS_HEADER_DONE		876
+#define CMDQ_EVENT_VENC_TOP_SPS_HEADER_DONE		877
+#define CMDQ_EVENT_VENC_TOP_VPS_HEADER_DONE		878
+#define CMDQ_EVENT_WPE_VPP0_WPE_GCE_FRAME_DONE		882
+#define CMDQ_EVENT_WPE_VPP0_WPE_DONE_SYNC_OUT		883
+#define CMDQ_EVENT_SVPP1_MDP_OVL_NEW_EVENT_2		896
+#define CMDQ_EVENT_SVPP1_MDP_OVL_NEW_EVENT_3		897
+#define CMDQ_EVENT_SVPP1_MDP_OVL_NEW_EVENT_4		898
+#define CMDQ_EVENT_SVPP1_MDP_OVL_NEW_EVENT_5		899
+#define CMDQ_EVENT_SVPP1_MDP_OVL_NEW_EVENT_6		900
+#define CMDQ_EVENT_VDO1_DPI0_TARGET_LINE_0_EVENT_MM		928
+#define CMDQ_EVENT_VDO1_DPI0_TRIGGER_LOOP_CLEAR_EVENT_MM	929
+#define CMDQ_EVENT_VDO1_DPI0_LAST_LINE_EVENT_MM			930
+#define CMDQ_EVENT_VDO1_DPI0_LAST_SAFE_BLANK_EVENT_MM		931
+#define CMDQ_EVENT_VDO1_DPI0_VSYNC_START_EVENT_MM		932
+#define CMDQ_EVENT_VDO1_DPI1_TARGET_LINE_1_EVENT_MM		933
+#define CMDQ_EVENT_VDO1_DPI1_TARGET_LINE_0_EVENT_MM		934
+#define CMDQ_EVENT_VDO1_DPI1_TRIGGER_LOOP_CLEAR_EVENT_MM	935
+#define CMDQ_EVENT_VDO1_DPI1_LAST_LINE_EVENT_MM			936
+#define CMDQ_EVENT_VDO1_DPI1_LAST_SAFE_BLANK_EVENT_MM		937
+#define CMDQ_EVENT_VDO1_DPI1_VSYNC_START_EVENT_MM		938
+#define CMDQ_EVENT_VDO1_DP_INTF_TARGET_LINE_1_EVENT_MM		939
+#define CMDQ_EVENT_VDO1_DP_INTF_TARGET_LINE_0_EVENT_MM		940
+#define CMDQ_EVENT_VDO1_DP_INTF_TRIGGER_LOOP_CLEAR_EVENT_MM	941
+#define CMDQ_EVENT_VDO1_DP_INTF_LAST_LINE_EVENT_MM		942
+#define CMDQ_EVENT_VDO1_DP_INTF_LAST_SAFE_BLANK_EVENT_MM	943
+#define CMDQ_EVENT_VBLANK_FALLING		946
+#define CMDQ_EVENT_VSC_FINISH			947
+#define CMDQ_EVENT_TPR_0			962
+#define CMDQ_EVENT_TPR_1			963
+#define CMDQ_EVENT_TPR_2			964
+#define CMDQ_EVENT_TPR_3			965
+#define CMDQ_EVENT_TPR_4			966
+#define CMDQ_EVENT_TPR_5			967
+#define CMDQ_EVENT_TPR_6			968
+#define CMDQ_EVENT_TPR_7			969
+#define CMDQ_EVENT_TPR_8			970
+#define CMDQ_EVENT_TPR_9			971
+#define CMDQ_EVENT_TPR_10			972
+#define CMDQ_EVENT_TPR_11			973
+#define CMDQ_EVENT_TPR_12			974
+#define CMDQ_EVENT_TPR_13			975
+#define CMDQ_EVENT_TPR_14			976
+#define CMDQ_EVENT_TPR_15			977
+#define CMDQ_EVENT_TPR_16			978
+#define CMDQ_EVENT_TPR_17			979
+#define CMDQ_EVENT_TPR_18			980
+#define CMDQ_EVENT_TPR_19			981
+#define CMDQ_EVENT_TPR_20			982
+#define CMDQ_EVENT_TPR_21			983
+#define CMDQ_EVENT_TPR_22			984
+#define CMDQ_EVENT_TPR_23			985
+#define CMDQ_EVENT_TPR_24			986
+#define CMDQ_EVENT_TPR_25			987
+#define CMDQ_EVENT_TPR_26			988
+#define CMDQ_EVENT_TPR_27			989
+#define CMDQ_EVENT_TPR_28			990
+#define CMDQ_EVENT_TPR_29			991
+#define CMDQ_EVENT_TPR_30			992
+#define CMDQ_EVENT_TPR_31			993
+#define CMDQ_EVENT_TPR_TIMEOUT_0	994
+#define CMDQ_EVENT_TPR_TIMEOUT_1	995
+#define CMDQ_EVENT_TPR_TIMEOUT_2	996
+#define CMDQ_EVENT_TPR_TIMEOUT_3	997
+#define CMDQ_EVENT_TPR_TIMEOUT_4	998
+#define CMDQ_EVENT_TPR_TIMEOUT_5	999
+#define CMDQ_EVENT_TPR_TIMEOUT_6	1000
+#define CMDQ_EVENT_TPR_TIMEOUT_7	1001
+#define CMDQ_EVENT_TPR_TIMEOUT_8	1002
+#define CMDQ_EVENT_TPR_TIMEOUT_9	1003
+#define CMDQ_EVENT_TPR_TIMEOUT_10	1004
+#define CMDQ_EVENT_TPR_TIMEOUT_11	1005
+#define CMDQ_EVENT_TPR_TIMEOUT_12	1006
+#define CMDQ_EVENT_TPR_TIMEOUT_13	1007
+#define CMDQ_EVENT_TPR_TIMEOUT_14	1008
+#define CMDQ_EVENT_TPR_TIMEOUT_15	1009
+#define CMDQ_EVENT_OUTPIN_0		1018
+#define CMDQ_EVENT_OUTPIN_1		1019
+
+#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_EIS			124
+#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_TNR			125
+#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_LITE			126
+#define CMDQ_SYNC_TOKEN_IMGSYS_TRAW			127
+#define CMDQ_SYNC_TOKEN_IMGSYS_LTRAW			128
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_1			223
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_2			224
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_3			225
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_4			226
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_5			227
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_6			228
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_7			229
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_8			230
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_9			231
+#define CMDQ_SYNC_TOKEN_CAMSYS_POOL_10			232
+#define CMDQ_SYNC_TOKEN_IMGSYS_XTRAW			233
+#define CMDQ_SYNC_TOKEN_IMGSYS_DIP			234
+#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_A			235
+#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_B			236
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_1			237
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_2			238
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_3			239
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_4			240
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_5			241
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_6			242
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_7			243
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_8			244
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_9			245
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_10			246
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_11			247
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_12			248
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_13			249
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_14			250
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_15			251
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_16			252
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_17			253
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_18			254
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_19			255
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_20			276
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_21			277
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_22			278
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_23			279
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_24			280
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_25			281
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_26			282
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_27			283
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_28			284
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_29			285
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_30			286
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_31			287
+#define CMDQ_SYNC_TOKEN_IPESYS_ME			300
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_TRAW			301
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_LTRAW		302
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_XTRAW		303
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_DIP			304
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_32			308
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_33			309
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_34			310
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_35			311
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_36			312
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_37			313
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_38			314
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_39			315
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_40			316
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_41			370
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_42			371
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_43			372
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_44			373
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_45			374
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_46			375
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_47			376
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_48			377
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_49			378
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_50			379
+#define CMDQ_SYNC_TOKEN_TZMP_ISP_WAIT			380
+#define CMDQ_SYNC_TOKEN_TZMP_ISP_SET			381
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_51			790
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_52			791
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_53			792
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_54			793
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_55			794
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_56			795
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_57			796
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_58			797
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_59			798
+#define CMDQ_SYNC_TOKEN_IMGSYS_POOL_60			799
+#define CMDQ_SYNC_TOKEN_PREBUILT_MDP_WAIT		816
+#define CMDQ_SYNC_TOKEN_PREBUILT_MDP_SET		817
+#define CMDQ_SYNC_TOKEN_PREBUILT_MDP_LOCK		818
+#define CMDQ_SYNC_TOKEN_PREBUILT_MML_WAIT		819
+#define CMDQ_SYNC_TOKEN_PREBUILT_MML_SET		820
+#define CMDQ_SYNC_TOKEN_PREBUILT_MML_LOCK		821
+#define CMDQ_SYNC_TOKEN_PREBUILT_VFMT_WAIT		822
+#define CMDQ_SYNC_TOKEN_PREBUILT_VFMT_SET		823
+#define CMDQ_SYNC_TOKEN_PREBUILT_VFMT_LOCK		824
+#define CMDQ_SYNC_TOKEN_PREBUILT_DISP_WAIT		825
+#define CMDQ_SYNC_TOKEN_PREBUILT_DISP_SET		826
+#define CMDQ_SYNC_TOKEN_PREBUILT_DISP_LOCK		827
+#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY			848
+#define CMDQ_SYNC_TOKEN_STREAM_EOF			849
+#define CMDQ_SYNC_TOKEN_ESD_EOF				850
+#define CMDQ_SYNC_TOKEN_STREAM_BLOCK			851
+#define CMDQ_SYNC_TOKEN_CABC_EOF			852
+#define CMDQ_SYNC_TOKEN_VENC_INPUT_READY		853
+#define CMDQ_SYNC_TOKEN_VENC_EOF			854
+#define CMDQ_SYNC_TOKEN_SECURE_THR_EOF			855
+#define CMDQ_SYNC_TOKEN_USER_0				856
+#define CMDQ_SYNC_TOKEN_USER_1				857
+#define CMDQ_SYNC_TOKEN_POLL_MONITOR			858
+#define CMDQ_TOKEN_TPR_LOCK				859
+#define CMDQ_SYNC_TOKEN_MSS				860
+#define CMDQ_SYNC_TOKEN_MSF				861
+#define CMDQ_SYNC_TOKEN_GPR_SET_0			884
+#define CMDQ_SYNC_TOKEN_GPR_SET_1			885
+#define CMDQ_SYNC_TOKEN_GPR_SET_2			886
+#define CMDQ_SYNC_TOKEN_GPR_SET_3			887
+#define CMDQ_SYNC_TOKEN_GPR_SET_4			888
+#define CMDQ_SYNC_RESOURCE_WROT0			889
+#define CMDQ_SYNC_RESOURCE_WROT1			890
+#define CMDQ_SYNC_TOKEN_DISP_VA_START			1012
+#define CMDQ_SYNC_TOKEN_DISP_VA_END			1013
+
+#endif
diff --git a/dts/include/dt-bindings/media/video-interfaces.h b/dts/include/dt-bindings/media/video-interfaces.h
new file mode 100644
index 0000000000..68ac4e05e3
--- /dev/null
+++ b/dts/include/dt-bindings/media/video-interfaces.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (C) 2022 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef __DT_BINDINGS_MEDIA_VIDEO_INTERFACES_H__
+#define __DT_BINDINGS_MEDIA_VIDEO_INTERFACES_H__
+
+#define MEDIA_BUS_TYPE_CSI2_CPHY		1
+#define MEDIA_BUS_TYPE_CSI1			2
+#define MEDIA_BUS_TYPE_CCP2			3
+#define MEDIA_BUS_TYPE_CSI2_DPHY		4
+#define MEDIA_BUS_TYPE_PARALLEL			5
+#define MEDIA_BUS_TYPE_BT656			6
+
+#endif /* __DT_BINDINGS_MEDIA_VIDEO_INTERFACES_H__ */
diff --git a/dts/include/dt-bindings/memory/mediatek,mt8365-larb-port.h b/dts/include/dt-bindings/memory/mediatek,mt8365-larb-port.h
new file mode 100644
index 0000000000..56d5a5dd51
--- /dev/null
+++ b/dts/include/dt-bindings/memory/mediatek,mt8365-larb-port.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Yong Wu <yong.wu@mediatek.com>
+ */
+#ifndef _DT_BINDINGS_MEMORY_MT8365_LARB_PORT_H_
+#define _DT_BINDINGS_MEMORY_MT8365_LARB_PORT_H_
+
+#include <dt-bindings/memory/mtk-memory-port.h>
+
+#define M4U_LARB0_ID			0
+#define M4U_LARB1_ID			1
+#define M4U_LARB2_ID			2
+#define M4U_LARB3_ID			3
+
+/* larb0 */
+#define M4U_PORT_DISP_OVL0		MTK_M4U_ID(M4U_LARB0_ID, 0)
+#define M4U_PORT_DISP_OVL0_2L		MTK_M4U_ID(M4U_LARB0_ID, 1)
+#define M4U_PORT_DISP_RDMA0		MTK_M4U_ID(M4U_LARB0_ID, 2)
+#define M4U_PORT_DISP_WDMA0		MTK_M4U_ID(M4U_LARB0_ID, 3)
+#define M4U_PORT_DISP_RDMA1		MTK_M4U_ID(M4U_LARB0_ID, 4)
+#define M4U_PORT_MDP_RDMA0		MTK_M4U_ID(M4U_LARB0_ID, 5)
+#define M4U_PORT_MDP_WROT1		MTK_M4U_ID(M4U_LARB0_ID, 6)
+#define M4U_PORT_MDP_WROT0		MTK_M4U_ID(M4U_LARB0_ID, 7)
+#define M4U_PORT_MDP_RDMA1		MTK_M4U_ID(M4U_LARB0_ID, 8)
+#define M4U_PORT_DISP_FAKE0		MTK_M4U_ID(M4U_LARB0_ID, 9)
+#define M4U_PORT_APU_READ		MTK_M4U_ID(M4U_LARB0_ID, 10)
+#define M4U_PORT_APU_WRITE		MTK_M4U_ID(M4U_LARB0_ID, 11)
+
+/* larb1 */
+#define M4U_PORT_VENC_RCPU		MTK_M4U_ID(M4U_LARB1_ID, 0)
+#define M4U_PORT_VENC_REC		MTK_M4U_ID(M4U_LARB1_ID, 1)
+#define M4U_PORT_VENC_BSDMA		MTK_M4U_ID(M4U_LARB1_ID, 2)
+#define M4U_PORT_VENC_SV_COMV		MTK_M4U_ID(M4U_LARB1_ID, 3)
+#define M4U_PORT_VENC_RD_COMV		MTK_M4U_ID(M4U_LARB1_ID, 4)
+#define M4U_PORT_VENC_NBM_RDMA		MTK_M4U_ID(M4U_LARB1_ID, 5)
+#define M4U_PORT_VENC_NBM_RDMA_LITE	MTK_M4U_ID(M4U_LARB1_ID, 6)
+#define M4U_PORT_JPGENC_Y_RDMA		MTK_M4U_ID(M4U_LARB1_ID, 7)
+#define M4U_PORT_JPGENC_C_RDMA		MTK_M4U_ID(M4U_LARB1_ID, 8)
+#define M4U_PORT_JPGENC_Q_TABLE		MTK_M4U_ID(M4U_LARB1_ID, 9)
+#define M4U_PORT_JPGENC_BSDMA		MTK_M4U_ID(M4U_LARB1_ID, 10)
+#define M4U_PORT_JPGDEC_WDMA		MTK_M4U_ID(M4U_LARB1_ID, 11)
+#define M4U_PORT_JPGDEC_BSDMA		MTK_M4U_ID(M4U_LARB1_ID, 12)
+#define M4U_PORT_VENC_NBM_WDMA		MTK_M4U_ID(M4U_LARB1_ID, 13)
+#define M4U_PORT_VENC_NBM_WDMA_LITE	MTK_M4U_ID(M4U_LARB1_ID, 14)
+#define M4U_PORT_VENC_CUR_LUMA		MTK_M4U_ID(M4U_LARB1_ID, 15)
+#define M4U_PORT_VENC_CUR_CHROMA	MTK_M4U_ID(M4U_LARB1_ID, 16)
+#define M4U_PORT_VENC_REF_LUMA		MTK_M4U_ID(M4U_LARB1_ID, 17)
+#define M4U_PORT_VENC_REF_CHROMA	MTK_M4U_ID(M4U_LARB1_ID, 18)
+
+/* larb2 */
+#define M4U_PORT_CAM_IMGO		MTK_M4U_ID(M4U_LARB2_ID, 0)
+#define M4U_PORT_CAM_RRZO		MTK_M4U_ID(M4U_LARB2_ID, 1)
+#define M4U_PORT_CAM_AAO		MTK_M4U_ID(M4U_LARB2_ID, 2)
+#define M4U_PORT_CAM_LCS		MTK_M4U_ID(M4U_LARB2_ID, 3)
+#define M4U_PORT_CAM_ESFKO		MTK_M4U_ID(M4U_LARB2_ID, 4)
+#define M4U_PORT_CAM_CAM_SV0		MTK_M4U_ID(M4U_LARB2_ID, 5)
+#define M4U_PORT_CAM_CAM_SV1		MTK_M4U_ID(M4U_LARB2_ID, 6)
+#define M4U_PORT_CAM_LSCI		MTK_M4U_ID(M4U_LARB2_ID, 7)
+#define M4U_PORT_CAM_LSCI_D		MTK_M4U_ID(M4U_LARB2_ID, 8)
+#define M4U_PORT_CAM_AFO		MTK_M4U_ID(M4U_LARB2_ID, 9)
+#define M4U_PORT_CAM_SPARE		MTK_M4U_ID(M4U_LARB2_ID, 10)
+#define M4U_PORT_CAM_BPCI		MTK_M4U_ID(M4U_LARB2_ID, 11)
+#define M4U_PORT_CAM_BPCI_D		MTK_M4U_ID(M4U_LARB2_ID, 12)
+#define M4U_PORT_CAM_UFDI		MTK_M4U_ID(M4U_LARB2_ID, 13)
+#define M4U_PORT_CAM_IMGI		MTK_M4U_ID(M4U_LARB2_ID, 14)
+#define M4U_PORT_CAM_IMG2O		MTK_M4U_ID(M4U_LARB2_ID, 15)
+#define M4U_PORT_CAM_IMG3O		MTK_M4U_ID(M4U_LARB2_ID, 16)
+#define M4U_PORT_CAM_WPE0_I		MTK_M4U_ID(M4U_LARB2_ID, 17)
+#define M4U_PORT_CAM_WPE1_I		MTK_M4U_ID(M4U_LARB2_ID, 18)
+#define M4U_PORT_CAM_WPE_O		MTK_M4U_ID(M4U_LARB2_ID, 19)
+#define M4U_PORT_CAM_FD0_I		MTK_M4U_ID(M4U_LARB2_ID, 20)
+#define M4U_PORT_CAM_FD1_I		MTK_M4U_ID(M4U_LARB2_ID, 21)
+#define M4U_PORT_CAM_FD0_O		MTK_M4U_ID(M4U_LARB2_ID, 22)
+#define M4U_PORT_CAM_FD1_O		MTK_M4U_ID(M4U_LARB2_ID, 23)
+
+/* larb3 */
+#define M4U_PORT_HW_VDEC_MC_EXT		MTK_M4U_ID(M4U_LARB3_ID, 0)
+#define M4U_PORT_HW_VDEC_UFO_EXT	MTK_M4U_ID(M4U_LARB3_ID, 1)
+#define M4U_PORT_HW_VDEC_PP_EXT		MTK_M4U_ID(M4U_LARB3_ID, 2)
+#define M4U_PORT_HW_VDEC_PRED_RD_EXT	MTK_M4U_ID(M4U_LARB3_ID, 3)
+#define M4U_PORT_HW_VDEC_PRED_WR_EXT	MTK_M4U_ID(M4U_LARB3_ID, 4)
+#define M4U_PORT_HW_VDEC_PPWRAP_EXT	MTK_M4U_ID(M4U_LARB3_ID, 5)
+#define M4U_PORT_HW_VDEC_TILE_EXT	MTK_M4U_ID(M4U_LARB3_ID, 6)
+#define M4U_PORT_HW_VDEC_VLD_EXT	MTK_M4U_ID(M4U_LARB3_ID, 7)
+#define M4U_PORT_HW_VDEC_VLD2_EXT	MTK_M4U_ID(M4U_LARB3_ID, 8)
+#define M4U_PORT_HW_VDEC_AVC_MV_EXT	MTK_M4U_ID(M4U_LARB3_ID, 9)
+#define M4U_PORT_HW_VDEC_RG_CTRL_DMA_EXT MTK_M4U_ID(M4U_LARB3_ID, 10)
+
+#endif
diff --git a/dts/include/dt-bindings/memory/tegra234-mc.h b/dts/include/dt-bindings/memory/tegra234-mc.h
index bd71cc1d79..347e55e89a 100644
--- a/dts/include/dt-bindings/memory/tegra234-mc.h
+++ b/dts/include/dt-bindings/memory/tegra234-mc.h
@@ -8,31 +8,158 @@
 #define TEGRA234_SID_INVALID		0x00
 #define TEGRA234_SID_PASSTHROUGH	0x7f
 
+/* ISO stream IDs */
+#define TEGRA234_SID_ISO_NVDISPLAY	0x01
+#define TEGRA234_SID_ISO_VI		0x02
+#define TEGRA234_SID_ISO_VIFALC		0x03
+#define TEGRA234_SID_ISO_VI2		0x04
+#define TEGRA234_SID_ISO_VI2FALC	0x05
+#define TEGRA234_SID_ISO_VI_VM2		0x06
+#define TEGRA234_SID_ISO_VI2_VM2	0x07
+
 /* NISO0 stream IDs */
-#define TEGRA234_SID_APE	0x02
-#define TEGRA234_SID_HDA	0x03
-#define TEGRA234_SID_GPCDMA	0x04
-#define TEGRA234_SID_MGBE	0x06
-#define TEGRA234_SID_PCIE0	0x12
-#define TEGRA234_SID_PCIE4	0x13
-#define TEGRA234_SID_PCIE5	0x14
-#define TEGRA234_SID_PCIE6	0x15
-#define TEGRA234_SID_PCIE9	0x1f
-#define TEGRA234_SID_MGBE_VF1	0x49
-#define TEGRA234_SID_MGBE_VF2	0x4a
-#define TEGRA234_SID_MGBE_VF3	0x4b
+#define TEGRA234_SID_AON		0x01
+#define TEGRA234_SID_APE		0x02
+#define TEGRA234_SID_HDA		0x03
+#define TEGRA234_SID_GPCDMA		0x04
+#define TEGRA234_SID_ETR		0x05
+#define TEGRA234_SID_MGBE		0x06
+#define TEGRA234_SID_NVDISPLAY		0x07
+#define TEGRA234_SID_DCE		0x08
+#define TEGRA234_SID_PSC		0x09
+#define TEGRA234_SID_RCE		0x0a
+#define TEGRA234_SID_SCE		0x0b
+#define TEGRA234_SID_UFSHC		0x0c
+#define TEGRA234_SID_APE_1		0x0d
+#define TEGRA234_SID_GPCDMA_1		0x0e
+#define TEGRA234_SID_GPCDMA_2		0x0f
+#define TEGRA234_SID_GPCDMA_3		0x10
+#define TEGRA234_SID_GPCDMA_4		0x11
+#define TEGRA234_SID_PCIE0		0x12
+#define TEGRA234_SID_PCIE4		0x13
+#define TEGRA234_SID_PCIE5		0x14
+#define TEGRA234_SID_PCIE6		0x15
+#define TEGRA234_SID_RCE_VM2		0x16
+#define TEGRA234_SID_RCE_SERVER		0x17
+#define TEGRA234_SID_SMMU_TEST		0x18
+#define TEGRA234_SID_UFS_1		0x19
+#define TEGRA234_SID_UFS_2		0x1a
+#define TEGRA234_SID_UFS_3		0x1b
+#define TEGRA234_SID_UFS_4		0x1c
+#define TEGRA234_SID_UFS_5		0x1d
+#define TEGRA234_SID_UFS_6		0x1e
+#define TEGRA234_SID_PCIE9		0x1f
+#define TEGRA234_SID_VSE_GPCDMA_VM0	0x20
+#define TEGRA234_SID_VSE_GPCDMA_VM1	0x21
+#define TEGRA234_SID_VSE_GPCDMA_VM2	0x22
+#define TEGRA234_SID_NVDLA1		0x23
+#define TEGRA234_SID_NVENC		0x24
+#define TEGRA234_SID_NVJPG1		0x25
+#define TEGRA234_SID_OFA		0x26
+#define TEGRA234_SID_MGBE_VF1		0x49
+#define TEGRA234_SID_MGBE_VF2		0x4a
+#define TEGRA234_SID_MGBE_VF3		0x4b
+#define TEGRA234_SID_MGBE_VF4		0x4c
+#define TEGRA234_SID_MGBE_VF5		0x4d
+#define TEGRA234_SID_MGBE_VF6		0x4e
+#define TEGRA234_SID_MGBE_VF7		0x4f
+#define TEGRA234_SID_MGBE_VF8		0x50
+#define TEGRA234_SID_MGBE_VF9		0x51
+#define TEGRA234_SID_MGBE_VF10		0x52
+#define TEGRA234_SID_MGBE_VF11		0x53
+#define TEGRA234_SID_MGBE_VF12		0x54
+#define TEGRA234_SID_MGBE_VF13		0x55
+#define TEGRA234_SID_MGBE_VF14		0x56
+#define TEGRA234_SID_MGBE_VF15		0x57
+#define TEGRA234_SID_MGBE_VF16		0x58
+#define TEGRA234_SID_MGBE_VF17		0x59
+#define TEGRA234_SID_MGBE_VF18		0x5a
+#define TEGRA234_SID_MGBE_VF19		0x5b
+#define TEGRA234_SID_MGBE_VF20		0x5c
+#define TEGRA234_SID_APE_2		0x5e
+#define TEGRA234_SID_APE_3		0x5f
+#define TEGRA234_SID_UFS_7		0x60
+#define TEGRA234_SID_UFS_8		0x61
+#define TEGRA234_SID_UFS_9		0x62
+#define TEGRA234_SID_UFS_10		0x63
+#define TEGRA234_SID_UFS_11		0x64
+#define TEGRA234_SID_UFS_12		0x65
+#define TEGRA234_SID_UFS_13		0x66
+#define TEGRA234_SID_UFS_14		0x67
+#define TEGRA234_SID_UFS_15		0x68
+#define TEGRA234_SID_UFS_16		0x69
+#define TEGRA234_SID_UFS_17		0x6a
+#define TEGRA234_SID_UFS_18		0x6b
+#define TEGRA234_SID_UFS_19		0x6c
+#define TEGRA234_SID_UFS_20		0x6d
+#define TEGRA234_SID_GPCDMA_5		0x6e
+#define TEGRA234_SID_GPCDMA_6		0x6f
+#define TEGRA234_SID_GPCDMA_7		0x70
+#define TEGRA234_SID_GPCDMA_8		0x71
+#define TEGRA234_SID_GPCDMA_9		0x72
 
 /* NISO1 stream IDs */
-#define TEGRA234_SID_SDMMC4	0x02
-#define TEGRA234_SID_PCIE1	0x05
-#define TEGRA234_SID_PCIE2	0x06
-#define TEGRA234_SID_PCIE3	0x07
-#define TEGRA234_SID_PCIE7	0x08
-#define TEGRA234_SID_PCIE8	0x09
-#define TEGRA234_SID_PCIE10	0x0b
-#define TEGRA234_SID_BPMP	0x10
-#define TEGRA234_SID_HOST1X	0x27
-#define TEGRA234_SID_VIC	0x34
+#define TEGRA234_SID_SDMMC1A		0x01
+#define TEGRA234_SID_SDMMC4		0x02
+#define TEGRA234_SID_EQOS		0x03
+#define TEGRA234_SID_HWMP_PMA		0x04
+#define TEGRA234_SID_PCIE1		0x05
+#define TEGRA234_SID_PCIE2		0x06
+#define TEGRA234_SID_PCIE3		0x07
+#define TEGRA234_SID_PCIE7		0x08
+#define TEGRA234_SID_PCIE8		0x09
+#define TEGRA234_SID_PCIE10		0x0b
+#define TEGRA234_SID_QSPI0		0x0c
+#define TEGRA234_SID_QSPI1		0x0d
+#define TEGRA234_SID_XUSB_HOST		0x0e
+#define TEGRA234_SID_XUSB_DEV		0x0f
+#define TEGRA234_SID_BPMP		0x10
+#define TEGRA234_SID_FSI		0x11
+#define TEGRA234_SID_PVA0_VM0		0x12
+#define TEGRA234_SID_PVA0_VM1		0x13
+#define TEGRA234_SID_PVA0_VM2		0x14
+#define TEGRA234_SID_PVA0_VM3		0x15
+#define TEGRA234_SID_PVA0_VM4		0x16
+#define TEGRA234_SID_PVA0_VM5		0x17
+#define TEGRA234_SID_PVA0_VM6		0x18
+#define TEGRA234_SID_PVA0_VM7		0x19
+#define TEGRA234_SID_XUSB_VF0		0x1a
+#define TEGRA234_SID_XUSB_VF1		0x1b
+#define TEGRA234_SID_XUSB_VF2		0x1c
+#define TEGRA234_SID_XUSB_VF3		0x1d
+#define TEGRA234_SID_EQOS_VF1		0x1e
+#define TEGRA234_SID_EQOS_VF2		0x1f
+#define TEGRA234_SID_EQOS_VF3		0x20
+#define TEGRA234_SID_EQOS_VF4		0x21
+#define TEGRA234_SID_ISP_VM2		0x22
+#define TEGRA234_SID_HOST1X		0x27
+#define TEGRA234_SID_ISP		0x28
+#define TEGRA234_SID_NVDEC		0x29
+#define TEGRA234_SID_NVJPG		0x2a
+#define TEGRA234_SID_NVDLA0		0x2b
+#define TEGRA234_SID_PVA0		0x2c
+#define TEGRA234_SID_SES_SE0		0x2d
+#define TEGRA234_SID_SES_SE1		0x2e
+#define TEGRA234_SID_SES_SE2		0x2f
+#define TEGRA234_SID_SEU1_SE0		0x30
+#define TEGRA234_SID_SEU1_SE1		0x31
+#define TEGRA234_SID_SEU1_SE2		0x32
+#define TEGRA234_SID_TSEC		0x33
+#define TEGRA234_SID_VIC		0x34
+#define TEGRA234_SID_HC_VM0		0x3d
+#define TEGRA234_SID_HC_VM1		0x3e
+#define TEGRA234_SID_HC_VM2		0x3f
+#define TEGRA234_SID_HC_VM3		0x40
+#define TEGRA234_SID_HC_VM4		0x41
+#define TEGRA234_SID_HC_VM5		0x42
+#define TEGRA234_SID_HC_VM6		0x43
+#define TEGRA234_SID_HC_VM7		0x44
+#define TEGRA234_SID_SE_VM0		0x45
+#define TEGRA234_SID_SE_VM1		0x46
+#define TEGRA234_SID_SE_VM2		0x47
+#define TEGRA234_SID_ISPFALC		0x48
+#define TEGRA234_SID_NISO1_SMMU_TEST	0x49
+#define TEGRA234_SID_TSEC_VM0		0x4a
 
 /* Shared stream IDs */
 #define TEGRA234_SID_HOST1X_CTX0	0x35
@@ -48,21 +175,81 @@
  * memory client IDs
  */
 
+/* Misses from System Memory Management Unit (SMMU) Page Table Cache (PTC) */
+#define TEGRA234_MEMORY_CLIENT_PTCR 0x00
+/* MSS internal memqual MIU7 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU7R 0x01
+/* MSS internal memqual MIU7 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU7W 0x02
+/* MSS internal memqual MIU8 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU8R 0x03
+/* MSS internal memqual MIU8 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU8W 0x04
+/* MSS internal memqual MIU9 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU9R 0x05
+/* MSS internal memqual MIU9 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU9W 0x06
+/* MSS internal memqual MIU10 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU10R 0x07
+/* MSS internal memqual MIU10 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU10W 0x08
+/* MSS internal memqual MIU11 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU11R 0x09
+/* MSS internal memqual MIU11 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU11W 0x0a
+/* MSS internal memqual MIU12 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU12R 0x0b
+/* MSS internal memqual MIU12 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU12W 0x0c
+/* MSS internal memqual MIU13 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU13R 0x0d
+/* MSS internal memqual MIU13 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU13W 0x0e
+#define TEGRA234_MEMORY_CLIENT_NVL5RHP 0x13
+#define TEGRA234_MEMORY_CLIENT_NVL5R 0x14
 /* High-definition audio (HDA) read clients */
 #define TEGRA234_MEMORY_CLIENT_HDAR 0x15
+/* Host channel data read clients */
 #define TEGRA234_MEMORY_CLIENT_HOST1XDMAR 0x16
+#define TEGRA234_MEMORY_CLIENT_NVL5W 0x17
+#define TEGRA234_MEMORY_CLIENT_NVL6RHP 0x18
+#define TEGRA234_MEMORY_CLIENT_NVL6R 0x19
+#define TEGRA234_MEMORY_CLIENT_NVL6W 0x1a
+#define TEGRA234_MEMORY_CLIENT_NVL7RHP 0x1b
+#define TEGRA234_MEMORY_CLIENT_NVENCSRD 0x1c
+#define TEGRA234_MEMORY_CLIENT_NVL7R 0x1d
+#define TEGRA234_MEMORY_CLIENT_NVL7W 0x1e
+#define TEGRA234_MEMORY_CLIENT_NVL8RHP 0x20
+#define TEGRA234_MEMORY_CLIENT_NVL8R 0x21
+#define TEGRA234_MEMORY_CLIENT_NVL8W 0x22
+#define TEGRA234_MEMORY_CLIENT_NVL9RHP 0x23
+#define TEGRA234_MEMORY_CLIENT_NVL9R 0x24
+#define TEGRA234_MEMORY_CLIENT_NVL9W 0x25
 /* PCIE6 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE6AR 0x28
 /* PCIE6 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE6AW 0x29
 /* PCIE7 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE7AR 0x2a
+#define TEGRA234_MEMORY_CLIENT_NVENCSWR 0x2b
+/* DLA0ARDB read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDB 0x2c
+/* DLA0ARDB1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDB1 0x2d
+/* DLA0 writes */
+#define TEGRA234_MEMORY_CLIENT_DLA0WRB 0x2e
+/* DLA1ARDB read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDB 0x2f
 /* PCIE7 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE7AW 0x30
 /* PCIE8 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE8AR 0x32
 /* High-definition audio (HDA) write clients */
 #define TEGRA234_MEMORY_CLIENT_HDAW 0x35
+/* Writes from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA234_MEMORY_CLIENT_MPCOREW 0x39
+/* OFAA client */
+#define TEGRA234_MEMORY_CLIENT_OFAR1 0x3a
 /* PCIE8 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE8AW 0x3b
 /* PCIE9 read clients */
@@ -75,10 +262,32 @@
 #define TEGRA234_MEMORY_CLIENT_PCIE10AR 0x3f
 /* PCIE10 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE10AW 0x40
+/* ISP read client for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPRA 0x44
+/* ISP read client 1 for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPFALR 0x45
+/* ISP Write client for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPWA 0x46
+/* ISP Write client Crossbar B */
+#define TEGRA234_MEMORY_CLIENT_ISPWB 0x47
 /* PCIE10r1 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE10AR1 0x48
 /* PCIE7r1 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE7AR1 0x49
+/* XUSB_HOST read clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_HOSTR 0x4a
+/* XUSB_HOST write clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_HOSTW 0x4b
+/* XUSB read clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_DEVR 0x4c
+/* XUSB_DEV write clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_DEVW 0x4d
+/* TSEC Memory Return Data Client Description */
+#define TEGRA234_MEMORY_CLIENT_TSECSRD 0x54
+/* TSEC Memory Write Client Description */
+#define TEGRA234_MEMORY_CLIENT_TSECSWR 0x55
+/* XSPI writes */
+#define TEGRA234_MEMORY_CLIENT_XSPI1W 0x56
 /* MGBE0 read client */
 #define TEGRA234_MEMORY_CLIENT_MGBEARD 0x58
 /* MGBEB read client */
@@ -89,18 +298,86 @@
 #define TEGRA234_MEMORY_CLIENT_MGBEDRD 0x5b
 /* MGBE0 write client */
 #define TEGRA234_MEMORY_CLIENT_MGBEAWR 0x5c
+/* OFAA client */
+#define TEGRA234_MEMORY_CLIENT_OFAR 0x5d
+/* OFAA writes */
+#define TEGRA234_MEMORY_CLIENT_OFAW 0x5e
 /* MGBEB write client */
 #define TEGRA234_MEMORY_CLIENT_MGBEBWR 0x5f
+/* sdmmca memory read client */
+#define TEGRA234_MEMORY_CLIENT_SDMMCRA 0x60
 /* MGBEC write client */
 #define TEGRA234_MEMORY_CLIENT_MGBECWR 0x61
 /* sdmmcd memory read client */
 #define TEGRA234_MEMORY_CLIENT_SDMMCRAB 0x63
+/* sdmmca memory write client */
+#define TEGRA234_MEMORY_CLIENT_SDMMCWA 0x64
 /* MGBED write client */
 #define TEGRA234_MEMORY_CLIENT_MGBEDWR 0x65
 /* sdmmcd memory write client */
 #define TEGRA234_MEMORY_CLIENT_SDMMCWAB 0x67
+/* SE Memory Return Data Client Description */
+#define TEGRA234_MEMORY_CLIENT_SEU1RD 0x68
+/* SE Memory Write Client Description */
+#define TEGRA234_MEMORY_CLIENT_SUE1WR 0x69
 #define TEGRA234_MEMORY_CLIENT_VICSRD 0x6c
 #define TEGRA234_MEMORY_CLIENT_VICSWR 0x6d
+/* DLA1ARDB1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDB1 0x6e
+/* DLA1 writes */
+#define TEGRA234_MEMORY_CLIENT_DLA1WRB 0x6f
+/* VI FLACON read clients */
+#define TEGRA234_MEMORY_CLIENT_VI2FALR 0x71
+/* VI Write client */
+#define TEGRA234_MEMORY_CLIENT_VI2W 0x70
+/* VI Write client */
+#define TEGRA234_MEMORY_CLIENT_VIW 0x72
+/* NISO display read client */
+#define TEGRA234_MEMORY_CLIENT_NVDISPNISOR 0x73
+/* NVDISPNISO writes */
+#define TEGRA234_MEMORY_CLIENT_NVDISPNISOW 0x74
+/* XSPI client */
+#define TEGRA234_MEMORY_CLIENT_XSPI0R 0x75
+/* XSPI writes */
+#define TEGRA234_MEMORY_CLIENT_XSPI0W 0x76
+/* XSPI client */
+#define TEGRA234_MEMORY_CLIENT_XSPI1R 0x77
+#define TEGRA234_MEMORY_CLIENT_NVDECSRD 0x78
+#define TEGRA234_MEMORY_CLIENT_NVDECSWR 0x79
+/* Audio Processing (APE) engine read clients */
+#define TEGRA234_MEMORY_CLIENT_APER 0x7a
+/* Audio Processing (APE) engine write clients */
+#define TEGRA234_MEMORY_CLIENT_APEW 0x7b
+/* VI2FAL writes */
+#define TEGRA234_MEMORY_CLIENT_VI2FALW 0x7c
+#define TEGRA234_MEMORY_CLIENT_NVJPGSRD 0x7e
+#define TEGRA234_MEMORY_CLIENT_NVJPGSWR 0x7f
+/* SE Memory Return Data Client Description */
+#define TEGRA234_MEMORY_CLIENT_SESRD 0x80
+/* SE Memory Write Client Description */
+#define TEGRA234_MEMORY_CLIENT_SESWR 0x81
+/* AXI AP and DFD-AUX0/1 read clients Both share the same interface on the on MSS */
+#define TEGRA234_MEMORY_CLIENT_AXIAPR 0x82
+/* AXI AP and DFD-AUX0/1 write clients Both sahre the same interface on MSS */
+#define TEGRA234_MEMORY_CLIENT_AXIAPW 0x83
+/* ETR read clients */
+#define TEGRA234_MEMORY_CLIENT_ETRR 0x84
+/* ETR write clients */
+#define TEGRA234_MEMORY_CLIENT_ETRW 0x85
+/* AXI Switch read client */
+#define TEGRA234_MEMORY_CLIENT_AXISR 0x8c
+/* AXI Switch write client */
+#define TEGRA234_MEMORY_CLIENT_AXISW 0x8d
+/* EQOS read client */
+#define TEGRA234_MEMORY_CLIENT_EQOSR 0x8e
+/* EQOS write client */
+#define TEGRA234_MEMORY_CLIENT_EQOSW 0x8f
+/* UFSHC read client */
+#define TEGRA234_MEMORY_CLIENT_UFSHCR 0x90
+/* UFSHC write client */
+#define TEGRA234_MEMORY_CLIENT_UFSHCW 0x91
+/* NVDISPLAY read client */
+#define TEGRA234_MEMORY_CLIENT_NVDISPLAYR 0x92
 /* BPMP read client */
 #define TEGRA234_MEMORY_CLIENT_BPMPR 0x93
 /* BPMP write client */
@@ -109,10 +386,97 @@
 #define TEGRA234_MEMORY_CLIENT_BPMPDMAR 0x95
 /* BPMPDMA write client */
 #define TEGRA234_MEMORY_CLIENT_BPMPDMAW 0x96
+/* AON read client */
+#define TEGRA234_MEMORY_CLIENT_AONR 0x97
+/* AON write client */
+#define TEGRA234_MEMORY_CLIENT_AONW 0x98
+/* AONDMA read client */
+#define TEGRA234_MEMORY_CLIENT_AONDMAR 0x99
+/* AONDMA write client */
+#define TEGRA234_MEMORY_CLIENT_AONDMAW 0x9a
+/* SCE read client */
+#define TEGRA234_MEMORY_CLIENT_SCER 0x9b
+/* SCE write client */
+#define TEGRA234_MEMORY_CLIENT_SCEW 0x9c
+/* SCEDMA read client */
+#define TEGRA234_MEMORY_CLIENT_SCEDMAR 0x9d
+/* SCEDMA write client */
+#define TEGRA234_MEMORY_CLIENT_SCEDMAW 0x9e
 /* APEDMA read client */
 #define TEGRA234_MEMORY_CLIENT_APEDMAR 0x9f
 /* APEDMA write client */
 #define TEGRA234_MEMORY_CLIENT_APEDMAW 0xa0
+/* NVDISPLAY read client instance 2 */
+#define TEGRA234_MEMORY_CLIENT_NVDISPLAYR1 0xa1
+#define TEGRA234_MEMORY_CLIENT_VICSRD1 0xa2
+/* MSS internal memqual MIU0 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU0R 0xa6
+/* MSS internal memqual MIU0 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU0W 0xa7
+/* MSS internal memqual MIU1 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU1R 0xa8
+/* MSS internal memqual MIU1 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU1W 0xa9
+/* MSS internal memqual MIU2 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU2R 0xae
+/* MSS internal memqual MIU2 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU2W 0xaf
+/* MSS internal memqual MIU3 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU3R 0xb0
+/* MSS internal memqual MIU3 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU3W 0xb1
+/* MSS internal memqual MIU4 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU4R 0xb2
+/* MSS internal memqual MIU4 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU4W 0xb3
+#define TEGRA234_MEMORY_CLIENT_DPMUR 0xb4
+#define TEGRA234_MEMORY_CLIENT_DPMUW 0xb5
+#define TEGRA234_MEMORY_CLIENT_NVL0R 0xb6
+#define TEGRA234_MEMORY_CLIENT_NVL0W 0xb7
+#define TEGRA234_MEMORY_CLIENT_NVL1R 0xb8
+#define TEGRA234_MEMORY_CLIENT_NVL1W 0xb9
+#define TEGRA234_MEMORY_CLIENT_NVL2R 0xba
+#define TEGRA234_MEMORY_CLIENT_NVL2W 0xbb
+/* VI FLACON read clients */
+#define TEGRA234_MEMORY_CLIENT_VIFALR 0xbc
+/* VIFAL write clients */
+#define TEGRA234_MEMORY_CLIENT_VIFALW 0xbd
+/* DLA0ARDA read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDA 0xbe
+/* DLA0 Falcon read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0FALRDB 0xbf
+/* DLA0 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0WRA 0xc0
+/* DLA0 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0FALWRB 0xc1
+/* DLA1ARDA read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDA 0xc2
+/* DLA1 Falcon read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1FALRDB 0xc3
+/* DLA1 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1WRA 0xc4
+/* DLA1 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1FALWRB 0xc5
+/* PVA0RDA read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDA 0xc6
+/* PVA0RDB read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDB 0xc7
+/* PVA0RDC read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDC 0xc8
+/* PVA0WRA write clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0WRA 0xc9
+/* PVA0WRB write clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0WRB 0xca
+/* PVA0WRC write clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0WRC 0xcb
+/* RCE read client */
+#define TEGRA234_MEMORY_CLIENT_RCER 0xd2
+/* RCE write client */
+#define TEGRA234_MEMORY_CLIENT_RCEW 0xd3
+/* RCEDMA read client */
+#define TEGRA234_MEMORY_CLIENT_RCEDMAR 0xd4
+/* RCEDMA write client */
+#define TEGRA234_MEMORY_CLIENT_RCEDMAW 0xd5
 /* PCIE0 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE0R 0xd8
 /* PCIE0 write clients */
@@ -137,7 +501,39 @@
 #define TEGRA234_MEMORY_CLIENT_PCIE5R 0xe2
 /* PCIE5 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE5W 0xe3
+/* ISP read client 1 for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPFALW 0xe4
+#define TEGRA234_MEMORY_CLIENT_NVL3R 0xe5
+#define TEGRA234_MEMORY_CLIENT_NVL3W 0xe6
+#define TEGRA234_MEMORY_CLIENT_NVL4R 0xe7
+#define TEGRA234_MEMORY_CLIENT_NVL4W 0xe8
+/* DLA0ARDA1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDA1 0xe9
+/* DLA1ARDA1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDA1 0xea
+/* PVA0RDA1 read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDA1 0xeb
+/* PVA0RDB1 read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDB1 0xec
 /* PCIE5r1 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE5R1 0xef
+#define TEGRA234_MEMORY_CLIENT_NVENCSRD1 0xf0
+/* ISP read client for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPRA1 0xf2
+#define TEGRA234_MEMORY_CLIENT_NVL0RHP 0xf4
+#define TEGRA234_MEMORY_CLIENT_NVL1RHP 0xf5
+#define TEGRA234_MEMORY_CLIENT_NVL2RHP 0xf6
+#define TEGRA234_MEMORY_CLIENT_NVL3RHP 0xf7
+#define TEGRA234_MEMORY_CLIENT_NVL4RHP 0xf8
+/* MSS internal memqual MIU5 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU5R 0xfc
+/* MSS internal memqual MIU5 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU5W 0xfd
+/* MSS internal memqual MIU6 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU6R 0xfe
+/* MSS internal memqual MIU6 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU6W 0xff
+#define TEGRA234_MEMORY_CLIENT_NVJPG1SRD 0x123
+#define TEGRA234_MEMORY_CLIENT_NVJPG1SWR 0x124
 
 #endif
diff --git a/dts/include/dt-bindings/phy/phy-qcom-qmp.h b/dts/include/dt-bindings/phy/phy-qcom-qmp.h
new file mode 100644
index 0000000000..4edec4c5b2
--- /dev/null
+++ b/dts/include/dt-bindings/phy/phy-qcom-qmp.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Qualcomm QMP PHY constants
+ *
+ * Copyright (C) 2022 Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_PHY_QMP
+#define _DT_BINDINGS_PHY_QMP
+
+/* QMP USB4-USB3-DP clocks */
+#define QMP_USB43DP_USB3_PIPE_CLK	0
+#define QMP_USB43DP_DP_LINK_CLK		1
+#define QMP_USB43DP_DP_VCO_DIV_CLK	2
+
+/* QMP USB4-USB3-DP PHYs */
+#define QMP_USB43DP_USB3_PHY		0
+#define QMP_USB43DP_DP_PHY		1
+
+#endif /* _DT_BINDINGS_PHY_QMP */
diff --git a/dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h b/dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h
index bd1c5a9fad..dfd3f6f13e 100644
--- a/dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h
+++ b/dts/include/dt-bindings/pinctrl/mt6795-pinfunc.h
@@ -4,8 +4,8 @@
  * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
  */
 
-#ifndef __DTS_MT8173_PINFUNC_H
-#define __DTS_MT8173_PINFUNC_H
+#ifndef __DTS_MT6795_PINFUNC_H
+#define __DTS_MT6795_PINFUNC_H
 
 #include <dt-bindings/pinctrl/mt65xx.h>
 
diff --git a/dts/include/dt-bindings/power/qcom-rpmpd.h b/dts/include/dt-bindings/power/qcom-rpmpd.h
index f5f82dde73..1e19e258a7 100644
--- a/dts/include/dt-bindings/power/qcom-rpmpd.h
+++ b/dts/include/dt-bindings/power/qcom-rpmpd.h
@@ -4,6 +4,16 @@
 #ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H
 #define _DT_BINDINGS_POWER_QCOM_RPMPD_H
 
+/* SDM670 Power Domain Indexes */
+#define SDM670_MX	0
+#define SDM670_MX_AO	1
+#define SDM670_CX	2
+#define SDM670_CX_AO	3
+#define SDM670_LMX	4
+#define SDM670_LCX	5
+#define SDM670_GFX	6
+#define SDM670_MSS	7
+
 /* SDM845 Power Domain Indexes */
 #define SDM845_EBI	0
 #define SDM845_MX	1
@@ -103,6 +113,28 @@
 #define SM8450_MXC_AO	11
 #define SM8450_MSS	12
 
+/* SM8550 Power Domain Indexes */
+#define SM8550_CX	0
+#define SM8550_CX_AO	1
+#define SM8550_EBI	2
+#define SM8550_GFX	3
+#define SM8550_LCX	4
+#define SM8550_LMX	5
+#define SM8550_MMCX	6
+#define SM8550_MMCX_AO	7
+#define SM8550_MX	8
+#define SM8550_MX_AO	9
+#define SM8550_MXC	10
+#define SM8550_MXC_AO	11
+#define SM8550_MSS	12
+#define SM8550_NSP	13
+
+/* QDU1000/QRU1000 Power Domain Indexes */
+#define QDU1000_EBI	0
+#define QDU1000_MSS	1
+#define QDU1000_CX	2
+#define QDU1000_MX	3
+
 /* SC7180 Power Domain Indexes */
 #define SC7180_CX	0
 #define SC7180_CX_AO	1
@@ -274,6 +306,16 @@
 #define SDM660_SSCMX		8
 #define SDM660_SSCMX_VFL	9
 
+/* SM4250 Power Domains */
+#define SM4250_VDDCX		0
+#define SM4250_VDDCX_AO		1
+#define SM4250_VDDCX_VFL	2
+#define SM4250_VDDMX		3
+#define SM4250_VDDMX_AO		4
+#define SM4250_VDDMX_VFL	5
+#define SM4250_VDD_LPI_CX	6
+#define SM4250_VDD_LPI_MX	7
+
 /* SM6115 Power Domains */
 #define SM6115_VDDCX		0
 #define SM6115_VDDCX_AO		1
diff --git a/dts/include/dt-bindings/power/tegra234-powergate.h b/dts/include/dt-bindings/power/tegra234-powergate.h
index ae9286cef8..b0fec2ddec 100644
--- a/dts/include/dt-bindings/power/tegra234-powergate.h
+++ b/dts/include/dt-bindings/power/tegra234-powergate.h
@@ -4,6 +4,7 @@
 #ifndef __ABI_MACH_T234_POWERGATE_T234_H_
 #define __ABI_MACH_T234_POWERGATE_T234_H_
 
+#define TEGRA234_POWER_DOMAIN_OFA	1U
 #define TEGRA234_POWER_DOMAIN_AUD	2U
 #define TEGRA234_POWER_DOMAIN_DISP	3U
 #define TEGRA234_POWER_DOMAIN_PCIEX8A	5U
@@ -11,6 +12,9 @@
 #define TEGRA234_POWER_DOMAIN_PCIEX4BA	7U
 #define TEGRA234_POWER_DOMAIN_PCIEX4BB	8U
 #define TEGRA234_POWER_DOMAIN_PCIEX1A	9U
+#define TEGRA234_POWER_DOMAIN_XUSBA	10U
+#define TEGRA234_POWER_DOMAIN_XUSBB	11U
+#define TEGRA234_POWER_DOMAIN_XUSBC	12U
 #define TEGRA234_POWER_DOMAIN_PCIEX4CA	13U
 #define TEGRA234_POWER_DOMAIN_PCIEX4CB	14U
 #define TEGRA234_POWER_DOMAIN_PCIEX4CC	15U
@@ -19,6 +23,17 @@
 #define TEGRA234_POWER_DOMAIN_MGBEB	18U
 #define TEGRA234_POWER_DOMAIN_MGBEC	19U
 #define TEGRA234_POWER_DOMAIN_MGBED	20U
+#define TEGRA234_POWER_DOMAIN_ISPA	22U
+#define TEGRA234_POWER_DOMAIN_NVDEC	23U
+#define TEGRA234_POWER_DOMAIN_NVJPGA	24U
+#define TEGRA234_POWER_DOMAIN_NVENC	25U
+#define TEGRA234_POWER_DOMAIN_VI	28U
 #define TEGRA234_POWER_DOMAIN_VIC	29U
+#define TEGRA234_POWER_DOMAIN_PVA	30U
+#define TEGRA234_POWER_DOMAIN_DLAA	32U
+#define TEGRA234_POWER_DOMAIN_DLAB	33U
+#define TEGRA234_POWER_DOMAIN_CV	34U
+#define TEGRA234_POWER_DOMAIN_GPU	35U
+#define TEGRA234_POWER_DOMAIN_NVJPGB	36U
 
 #endif
diff --git a/dts/include/dt-bindings/power/xlnx-zynqmp-power.h b/dts/include/dt-bindings/power/xlnx-zynqmp-power.h
index 0d9a412fd5..618024cbb2 100644
--- a/dts/include/dt-bindings/power/xlnx-zynqmp-power.h
+++ b/dts/include/dt-bindings/power/xlnx-zynqmp-power.h
@@ -6,6 +6,12 @@
 #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
 #define _DT_BINDINGS_ZYNQMP_POWER_H
 
+#define		PD_RPU_0	7
+#define		PD_RPU_1	8
+#define		PD_R5_0_ATCM	15
+#define		PD_R5_0_BTCM	16
+#define		PD_R5_1_ATCM	17
+#define		PD_R5_1_BTCM	18
 #define		PD_USB_0	22
 #define		PD_USB_1	23
 #define		PD_TTC_0	24
diff --git a/dts/include/dt-bindings/reset/mt8188-resets.h b/dts/include/dt-bindings/reset/mt8188-resets.h
new file mode 100644
index 0000000000..377cdfda82
--- /dev/null
+++ b/dts/include/dt-bindings/reset/mt8188-resets.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)*/
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Runyang Chen <runyang.chen@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8188
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8188
+
+#define MT8188_TOPRGU_CONN_MCU_SW_RST          0
+#define MT8188_TOPRGU_INFRA_GRST_SW_RST        1
+#define MT8188_TOPRGU_IPU0_SW_RST              2
+#define MT8188_TOPRGU_IPU1_SW_RST              3
+#define MT8188_TOPRGU_IPU2_SW_RST              4
+#define MT8188_TOPRGU_AUD_ASRC_SW_RST          5
+#define MT8188_TOPRGU_INFRA_SW_RST             6
+#define MT8188_TOPRGU_MMSYS_SW_RST             7
+#define MT8188_TOPRGU_MFG_SW_RST               8
+#define MT8188_TOPRGU_VENC_SW_RST              9
+#define MT8188_TOPRGU_VDEC_SW_RST              10
+#define MT8188_TOPRGU_CAM_VCORE_SW_RST         11
+#define MT8188_TOPRGU_SCP_SW_RST               12
+#define MT8188_TOPRGU_APMIXEDSYS_SW_RST        13
+#define MT8188_TOPRGU_AUDIO_SW_RST             14
+#define MT8188_TOPRGU_CAMSYS_SW_RST            15
+#define MT8188_TOPRGU_MJC_SW_RST               16
+#define MT8188_TOPRGU_PERI_SW_RST              17
+#define MT8188_TOPRGU_PERI_AO_SW_RST           18
+#define MT8188_TOPRGU_PCIE_SW_RST              19
+#define MT8188_TOPRGU_ADSPSYS_SW_RST           21
+#define MT8188_TOPRGU_DPTX_SW_RST              22
+#define MT8188_TOPRGU_SPMI_MST_SW_RST          23
+
+#define MT8188_TOPRGU_SW_RST_NUM               24
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8188 */
diff --git a/dts/include/dt-bindings/reset/rockchip,rk3588-cru.h b/dts/include/dt-bindings/reset/rockchip,rk3588-cru.h
new file mode 100644
index 0000000000..738e56aead
--- /dev/null
+++ b/dts/include/dt-bindings/reset/rockchip,rk3588-cru.h
@@ -0,0 +1,754 @@
+/* SPDX-License-Identifier: (GPL-2.0 or MIT) */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
+ * Copyright (c) 2022 Collabora Ltd.
+ *
+ * Author: Elaine Zhang <zhangqing@rock-chips.com>
+ * Author: Sebastian Reichel <sebastian.reichel@collabora.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_ROCKCHIP_RK3588_H
+#define _DT_BINDINGS_RESET_ROCKCHIP_RK3588_H
+
+#define SRST_A_TOP_BIU			0
+#define SRST_P_TOP_BIU			1
+#define SRST_P_CSIPHY0			2
+#define SRST_CSIPHY0			3
+#define SRST_P_CSIPHY1			4
+#define SRST_CSIPHY1			5
+#define SRST_A_TOP_M500_BIU		6
+
+#define SRST_A_TOP_M400_BIU		7
+#define SRST_A_TOP_S200_BIU		8
+#define SRST_A_TOP_S400_BIU		9
+#define SRST_A_TOP_M300_BIU		10
+#define SRST_USBDP_COMBO_PHY0_INIT	11
+#define SRST_USBDP_COMBO_PHY0_CMN	12
+#define SRST_USBDP_COMBO_PHY0_LANE	13
+#define SRST_USBDP_COMBO_PHY0_PCS	14
+#define SRST_USBDP_COMBO_PHY1_INIT	15
+
+#define SRST_USBDP_COMBO_PHY1_CMN	16
+#define SRST_USBDP_COMBO_PHY1_LANE	17
+#define SRST_USBDP_COMBO_PHY1_PCS	18
+#define SRST_DCPHY0			19
+#define SRST_P_MIPI_DCPHY0		20
+#define SRST_P_MIPI_DCPHY0_GRF		21
+
+#define SRST_DCPHY1			22
+#define SRST_P_MIPI_DCPHY1		23
+#define SRST_P_MIPI_DCPHY1_GRF		24
+#define SRST_P_APB2ASB_SLV_CDPHY	25
+#define SRST_P_APB2ASB_SLV_CSIPHY	26
+#define SRST_P_APB2ASB_SLV_VCCIO3_5	27
+#define SRST_P_APB2ASB_SLV_VCCIO6	28
+#define SRST_P_APB2ASB_SLV_EMMCIO	29
+#define SRST_P_APB2ASB_SLV_IOC_TOP	30
+#define SRST_P_APB2ASB_SLV_IOC_RIGHT	31
+
+#define SRST_P_CRU			32
+#define SRST_A_CHANNEL_SECURE2VO1USB	33
+#define SRST_A_CHANNEL_SECURE2CENTER	34
+#define SRST_H_CHANNEL_SECURE2VO1USB	35
+#define SRST_H_CHANNEL_SECURE2CENTER	36
+
+#define SRST_P_CHANNEL_SECURE2VO1USB	37
+#define SRST_P_CHANNEL_SECURE2CENTER	38
+
+#define SRST_H_AUDIO_BIU		39
+#define SRST_P_AUDIO_BIU		40
+#define SRST_H_I2S0_8CH			41
+#define SRST_M_I2S0_8CH_TX		42
+#define SRST_M_I2S0_8CH_RX		43
+#define SRST_P_ACDCDIG			44
+#define SRST_H_I2S2_2CH			45
+#define SRST_H_I2S3_2CH			46
+
+#define SRST_M_I2S2_2CH			47
+#define SRST_M_I2S3_2CH			48
+#define SRST_DAC_ACDCDIG		49
+#define SRST_H_SPDIF0			50
+
+#define SRST_M_SPDIF0			51
+#define SRST_H_SPDIF1			52
+#define SRST_M_SPDIF1			53
+#define SRST_H_PDM1			54
+#define SRST_PDM1			55
+
+#define SRST_A_BUS_BIU			56
+#define SRST_P_BUS_BIU			57
+#define SRST_A_GIC			58
+#define SRST_A_GIC_DBG			59
+#define SRST_A_DMAC0			60
+#define SRST_A_DMAC1			61
+#define SRST_A_DMAC2			62
+#define SRST_P_I2C1			63
+#define SRST_P_I2C2			64
+#define SRST_P_I2C3			65
+#define SRST_P_I2C4			66
+#define SRST_P_I2C5			67
+#define SRST_P_I2C6			68
+#define SRST_P_I2C7			69
+#define SRST_P_I2C8			70
+
+#define SRST_I2C1			71
+#define SRST_I2C2			72
+#define SRST_I2C3			73
+#define SRST_I2C4			74
+#define SRST_I2C5			75
+#define SRST_I2C6			76
+#define SRST_I2C7			77
+#define SRST_I2C8			78
+#define SRST_P_CAN0			79
+#define SRST_CAN0			80
+#define SRST_P_CAN1			81
+#define SRST_CAN1			82
+#define SRST_P_CAN2			83
+#define SRST_CAN2			84
+#define SRST_P_SARADC			85
+
+#define SRST_P_TSADC			86
+#define SRST_TSADC			87
+#define SRST_P_UART1			88
+#define SRST_P_UART2			89
+#define SRST_P_UART3			90
+#define SRST_P_UART4			91
+#define SRST_P_UART5			92
+#define SRST_P_UART6			93
+#define SRST_P_UART7			94
+#define SRST_P_UART8			95
+#define SRST_P_UART9			96
+#define SRST_S_UART1			97
+
+#define SRST_S_UART2			98
+#define SRST_S_UART3			99
+#define SRST_S_UART4			100
+#define SRST_S_UART5			101
+#define SRST_S_UART6			102
+#define SRST_S_UART7			103
+
+#define SRST_S_UART8			104
+#define SRST_S_UART9			105
+#define SRST_P_SPI0			106
+#define SRST_P_SPI1			107
+#define SRST_P_SPI2			108
+#define SRST_P_SPI3			109
+#define SRST_P_SPI4			110
+#define SRST_SPI0			111
+#define SRST_SPI1			112
+#define SRST_SPI2			113
+#define SRST_SPI3			114
+#define SRST_SPI4			115
+
+#define SRST_P_WDT0			116
+#define SRST_T_WDT0			117
+#define SRST_P_SYS_GRF			118
+#define SRST_P_PWM1			119
+#define SRST_PWM1			120
+#define SRST_P_PWM2			121
+#define SRST_PWM2			122
+#define SRST_P_PWM3			123
+#define SRST_PWM3			124
+#define SRST_P_BUSTIMER0		125
+#define SRST_P_BUSTIMER1		126
+#define SRST_BUSTIMER0			127
+
+#define SRST_BUSTIMER1			128
+#define SRST_BUSTIMER2			129
+#define SRST_BUSTIMER3			130
+#define SRST_BUSTIMER4			131
+#define SRST_BUSTIMER5			132
+#define SRST_BUSTIMER6			133
+#define SRST_BUSTIMER7			134
+#define SRST_BUSTIMER8			135
+#define SRST_BUSTIMER9			136
+#define SRST_BUSTIMER10			137
+#define SRST_BUSTIMER11			138
+#define SRST_P_MAILBOX0			139
+#define SRST_P_MAILBOX1			140
+#define SRST_P_MAILBOX2			141
+#define SRST_P_GPIO1			142
+#define SRST_GPIO1			143
+
+#define SRST_P_GPIO2			144
+#define SRST_GPIO2			145
+#define SRST_P_GPIO3			146
+#define SRST_GPIO3			147
+#define SRST_P_GPIO4			148
+#define SRST_GPIO4			149
+#define SRST_A_DECOM			150
+#define SRST_P_DECOM			151
+#define SRST_D_DECOM			152
+#define SRST_P_TOP			153
+#define SRST_A_GICADB_GIC2CORE_BUS	154
+#define SRST_P_DFT2APB			155
+#define SRST_P_APB2ASB_MST_TOP		156
+#define SRST_P_APB2ASB_MST_CDPHY	157
+#define SRST_P_APB2ASB_MST_BOT_RIGHT	158
+
+#define SRST_P_APB2ASB_MST_IOC_TOP	159
+#define SRST_P_APB2ASB_MST_IOC_RIGHT	160
+#define SRST_P_APB2ASB_MST_CSIPHY	161
+#define SRST_P_APB2ASB_MST_VCCIO3_5	162
+#define SRST_P_APB2ASB_MST_VCCIO6	163
+#define SRST_P_APB2ASB_MST_EMMCIO	164
+#define SRST_A_SPINLOCK			165
+#define SRST_P_OTPC_NS			166
+#define SRST_OTPC_NS			167
+#define SRST_OTPC_ARB			168
+
+#define SRST_P_BUSIOC			169
+#define SRST_P_PMUCM0_INTMUX		170
+#define SRST_P_DDRCM0_INTMUX		171
+
+#define SRST_P_DDR_DFICTL_CH0		172
+#define SRST_P_DDR_MON_CH0		173
+#define SRST_P_DDR_STANDBY_CH0		174
+#define SRST_P_DDR_UPCTL_CH0		175
+#define SRST_TM_DDR_MON_CH0		176
+#define SRST_P_DDR_GRF_CH01		177
+#define SRST_DFI_CH0			178
+#define SRST_SBR_CH0			179
+#define SRST_DDR_UPCTL_CH0		180
+#define SRST_DDR_DFICTL_CH0		181
+#define SRST_DDR_MON_CH0		182
+#define SRST_DDR_STANDBY_CH0		183
+#define SRST_A_DDR_UPCTL_CH0		184
+#define SRST_P_DDR_DFICTL_CH1		185
+#define SRST_P_DDR_MON_CH1		186
+#define SRST_P_DDR_STANDBY_CH1		187
+
+#define SRST_P_DDR_UPCTL_CH1		188
+#define SRST_TM_DDR_MON_CH1		189
+#define SRST_DFI_CH1			190
+#define SRST_SBR_CH1			191
+#define SRST_DDR_UPCTL_CH1		192
+#define SRST_DDR_DFICTL_CH1		193
+#define SRST_DDR_MON_CH1		194
+#define SRST_DDR_STANDBY_CH1		195
+#define SRST_A_DDR_UPCTL_CH1		196
+#define SRST_A_DDR01_MSCH0		197
+#define SRST_A_DDR01_RS_MSCH0		198
+#define SRST_A_DDR01_FRS_MSCH0		199
+
+#define SRST_A_DDR01_SCRAMBLE0		200
+#define SRST_A_DDR01_FRS_SCRAMBLE0	201
+#define SRST_A_DDR01_MSCH1		202
+#define SRST_A_DDR01_RS_MSCH1		203
+#define SRST_A_DDR01_FRS_MSCH1		204
+#define SRST_A_DDR01_SCRAMBLE1		205
+#define SRST_A_DDR01_FRS_SCRAMBLE1	206
+#define SRST_P_DDR01_MSCH0		207
+#define SRST_P_DDR01_MSCH1		208
+
+#define SRST_P_DDR_DFICTL_CH2		209
+#define SRST_P_DDR_MON_CH2		210
+#define SRST_P_DDR_STANDBY_CH2		211
+#define SRST_P_DDR_UPCTL_CH2		212
+#define SRST_TM_DDR_MON_CH2		213
+#define SRST_P_DDR_GRF_CH23		214
+#define SRST_DFI_CH2			215
+#define SRST_SBR_CH2			216
+#define SRST_DDR_UPCTL_CH2		217
+#define SRST_DDR_DFICTL_CH2		218
+#define SRST_DDR_MON_CH2		219
+#define SRST_DDR_STANDBY_CH2		220
+#define SRST_A_DDR_UPCTL_CH2		221
+#define SRST_P_DDR_DFICTL_CH3		222
+#define SRST_P_DDR_MON_CH3		223
+#define SRST_P_DDR_STANDBY_CH3		224
+
+#define SRST_P_DDR_UPCTL_CH3		225
+#define SRST_TM_DDR_MON_CH3		226
+#define SRST_DFI_CH3			227
+#define SRST_SBR_CH3			228
+#define SRST_DDR_UPCTL_CH3		229
+#define SRST_DDR_DFICTL_CH3		230
+#define SRST_DDR_MON_CH3		231
+#define SRST_DDR_STANDBY_CH3		232
+#define SRST_A_DDR_UPCTL_CH3		233
+#define SRST_A_DDR23_MSCH2		234
+#define SRST_A_DDR23_RS_MSCH2		235
+#define SRST_A_DDR23_FRS_MSCH2		236
+
+#define SRST_A_DDR23_SCRAMBLE2		237
+#define SRST_A_DDR23_FRS_SCRAMBLE2	238
+#define SRST_A_DDR23_MSCH3		239
+#define SRST_A_DDR23_RS_MSCH3		240
+#define SRST_A_DDR23_FRS_MSCH3		241
+#define SRST_A_DDR23_SCRAMBLE3		242
+#define SRST_A_DDR23_FRS_SCRAMBLE3	243
+#define SRST_P_DDR23_MSCH2		244
+#define SRST_P_DDR23_MSCH3		245
+
+#define SRST_ISP1			246
+#define SRST_ISP1_VICAP			247
+#define SRST_A_ISP1_BIU			248
+#define SRST_H_ISP1_BIU			249
+
+#define SRST_A_RKNN1			250
+#define SRST_A_RKNN1_BIU		251
+#define SRST_H_RKNN1			252
+#define SRST_H_RKNN1_BIU		253
+
+#define SRST_A_RKNN2			254
+#define SRST_A_RKNN2_BIU		255
+#define SRST_H_RKNN2			256
+#define SRST_H_RKNN2_BIU		257
+
+#define SRST_A_RKNN_DSU0		258
+#define SRST_P_NPUTOP_BIU		259
+#define SRST_P_NPU_TIMER		260
+#define SRST_NPUTIMER0			261
+#define SRST_NPUTIMER1			262
+#define SRST_P_NPU_WDT			263
+#define SRST_T_NPU_WDT			264
+#define SRST_P_NPU_PVTM			265
+#define SRST_P_NPU_GRF			266
+#define SRST_NPU_PVTM			267
+
+#define SRST_NPU_PVTPLL			268
+#define SRST_H_NPU_CM0_BIU		269
+#define SRST_F_NPU_CM0_CORE		270
+#define SRST_T_NPU_CM0_JTAG		271
+#define SRST_A_RKNN0			272
+#define SRST_A_RKNN0_BIU		273
+#define SRST_H_RKNN0			274
+#define SRST_H_RKNN0_BIU		275
+
+#define SRST_H_NVM_BIU			276
+#define SRST_A_NVM_BIU			277
+#define SRST_H_EMMC			278
+#define SRST_A_EMMC			279
+#define SRST_C_EMMC			280
+#define SRST_B_EMMC			281
+#define SRST_T_EMMC			282
+#define SRST_S_SFC			283
+#define SRST_H_SFC			284
+#define SRST_H_SFC_XIP			285
+
+#define SRST_P_GRF			286
+#define SRST_P_DEC_BIU			287
+#define SRST_P_PHP_BIU			288
+#define SRST_A_PCIE_GRIDGE		289
+#define SRST_A_PHP_BIU			290
+#define SRST_A_GMAC0			291
+#define SRST_A_GMAC1			292
+#define SRST_A_PCIE_BIU			293
+#define SRST_PCIE0_POWER_UP		294
+#define SRST_PCIE1_POWER_UP		295
+#define SRST_PCIE2_POWER_UP		296
+
+#define SRST_PCIE3_POWER_UP		297
+#define SRST_PCIE4_POWER_UP		298
+#define SRST_P_PCIE0			299
+#define SRST_P_PCIE1			300
+#define SRST_P_PCIE2			301
+#define SRST_P_PCIE3			302
+
+#define SRST_P_PCIE4			303
+#define SRST_A_PHP_GIC_ITS		304
+#define SRST_A_MMU_PCIE			305
+#define SRST_A_MMU_PHP			306
+#define SRST_A_MMU_BIU			307
+
+#define SRST_A_USB3OTG2			308
+
+#define SRST_PMALIVE0			309
+#define SRST_PMALIVE1			310
+#define SRST_PMALIVE2			311
+#define SRST_A_SATA0			312
+#define SRST_A_SATA1			313
+#define SRST_A_SATA2			314
+#define SRST_RXOOB0			315
+#define SRST_RXOOB1			316
+#define SRST_RXOOB2			317
+#define SRST_ASIC0			318
+#define SRST_ASIC1			319
+#define SRST_ASIC2			320
+
+#define SRST_A_RKVDEC_CCU		321
+#define SRST_H_RKVDEC0			322
+#define SRST_A_RKVDEC0			323
+#define SRST_H_RKVDEC0_BIU		324
+#define SRST_A_RKVDEC0_BIU		325
+#define SRST_RKVDEC0_CA			326
+#define SRST_RKVDEC0_HEVC_CA		327
+#define SRST_RKVDEC0_CORE		328
+
+#define SRST_H_RKVDEC1			329
+#define SRST_A_RKVDEC1			330
+#define SRST_H_RKVDEC1_BIU		331
+#define SRST_A_RKVDEC1_BIU		332
+#define SRST_RKVDEC1_CA			333
+#define SRST_RKVDEC1_HEVC_CA		334
+#define SRST_RKVDEC1_CORE		335
+
+#define SRST_A_USB_BIU			336
+#define SRST_H_USB_BIU			337
+#define SRST_A_USB3OTG0			338
+#define SRST_A_USB3OTG1			339
+#define SRST_H_HOST0			340
+#define SRST_H_HOST_ARB0		341
+#define SRST_H_HOST1			342
+#define SRST_H_HOST_ARB1		343
+#define SRST_A_USB_GRF			344
+#define SRST_C_USB2P0_HOST0		345
+
+#define SRST_C_USB2P0_HOST1		346
+#define SRST_HOST_UTMI0			347
+#define SRST_HOST_UTMI1			348
+
+#define SRST_A_VDPU_BIU			349
+#define SRST_A_VDPU_LOW_BIU		350
+#define SRST_H_VDPU_BIU			351
+#define SRST_A_JPEG_DECODER_BIU		352
+#define SRST_A_VPU			353
+#define SRST_H_VPU			354
+#define SRST_A_JPEG_ENCODER0		355
+#define SRST_H_JPEG_ENCODER0		356
+#define SRST_A_JPEG_ENCODER1		357
+#define SRST_H_JPEG_ENCODER1		358
+#define SRST_A_JPEG_ENCODER2		359
+#define SRST_H_JPEG_ENCODER2		360
+
+#define SRST_A_JPEG_ENCODER3		361
+#define SRST_H_JPEG_ENCODER3		362
+#define SRST_A_JPEG_DECODER		363
+#define SRST_H_JPEG_DECODER		364
+#define SRST_H_IEP2P0			365
+#define SRST_A_IEP2P0			366
+#define SRST_IEP2P0_CORE		367
+#define SRST_H_RGA2			368
+#define SRST_A_RGA2			369
+#define SRST_RGA2_CORE			370
+#define SRST_H_RGA3_0			371
+#define SRST_A_RGA3_0			372
+#define SRST_RGA3_0_CORE		373
+
+#define SRST_H_RKVENC0_BIU		374
+#define SRST_A_RKVENC0_BIU		375
+#define SRST_H_RKVENC0			376
+#define SRST_A_RKVENC0			377
+#define SRST_RKVENC0_CORE		378
+
+#define SRST_H_RKVENC1_BIU		379
+#define SRST_A_RKVENC1_BIU		380
+#define SRST_H_RKVENC1			381
+#define SRST_A_RKVENC1			382
+#define SRST_RKVENC1_CORE		383
+
+#define SRST_A_VI_BIU			384
+#define SRST_H_VI_BIU			385
+#define SRST_P_VI_BIU			386
+#define SRST_D_VICAP			387
+#define SRST_A_VICAP			388
+#define SRST_H_VICAP			389
+#define SRST_ISP0			390
+#define SRST_ISP0_VICAP			391
+
+#define SRST_FISHEYE0			392
+#define SRST_FISHEYE1			393
+#define SRST_P_CSI_HOST_0		394
+#define SRST_P_CSI_HOST_1		395
+#define SRST_P_CSI_HOST_2		396
+#define SRST_P_CSI_HOST_3		397
+#define SRST_P_CSI_HOST_4		398
+#define SRST_P_CSI_HOST_5		399
+
+#define SRST_CSIHOST0_VICAP		400
+#define SRST_CSIHOST1_VICAP		401
+#define SRST_CSIHOST2_VICAP		402
+#define SRST_CSIHOST3_VICAP		403
+#define SRST_CSIHOST4_VICAP		404
+#define SRST_CSIHOST5_VICAP		405
+#define SRST_CIFIN			406
+
+#define SRST_A_VOP_BIU			407
+#define SRST_A_VOP_LOW_BIU		408
+#define SRST_H_VOP_BIU			409
+#define SRST_P_VOP_BIU			410
+#define SRST_H_VOP			411
+#define SRST_A_VOP			412
+#define SRST_D_VOP0			413
+#define SRST_D_VOP2HDMI_BRIDGE0		414
+#define SRST_D_VOP2HDMI_BRIDGE1		415
+
+#define SRST_D_VOP1			416
+#define SRST_D_VOP2			417
+#define SRST_D_VOP3			418
+#define SRST_P_VOPGRF			419
+#define SRST_P_DSIHOST0			420
+#define SRST_P_DSIHOST1			421
+#define SRST_DSIHOST0			422
+#define SRST_DSIHOST1			423
+#define SRST_VOP_PMU			424
+#define SRST_P_VOP_CHANNEL_BIU		425
+
+#define SRST_H_VO0_BIU			426
+#define SRST_H_VO0_S_BIU		427
+#define SRST_P_VO0_BIU			428
+#define SRST_P_VO0_S_BIU		429
+#define SRST_A_HDCP0_BIU		430
+#define SRST_P_VO0GRF			431
+#define SRST_H_HDCP_KEY0		432
+#define SRST_A_HDCP0			433
+#define SRST_H_HDCP0			434
+#define SRST_HDCP0			435
+
+#define SRST_P_TRNG0			436
+#define SRST_DP0			437
+#define SRST_DP1			438
+#define SRST_H_I2S4_8CH			439
+#define SRST_M_I2S4_8CH_TX		440
+#define SRST_H_I2S8_8CH			441
+
+#define SRST_M_I2S8_8CH_TX		442
+#define SRST_H_SPDIF2_DP0		443
+#define SRST_M_SPDIF2_DP0		444
+#define SRST_H_SPDIF5_DP1		445
+#define SRST_M_SPDIF5_DP1		446
+
+#define SRST_A_HDCP1_BIU		447
+#define SRST_A_VO1_BIU			448
+#define SRST_H_VOP1_BIU			449
+#define SRST_H_VOP1_S_BIU		450
+#define SRST_P_VOP1_BIU			451
+#define SRST_P_VO1GRF			452
+#define SRST_P_VO1_S_BIU		453
+
+#define SRST_H_I2S7_8CH			454
+#define SRST_M_I2S7_8CH_RX		455
+#define SRST_H_HDCP_KEY1		456
+#define SRST_A_HDCP1			457
+#define SRST_H_HDCP1			458
+#define SRST_HDCP1			459
+#define SRST_P_TRNG1			460
+#define SRST_P_HDMITX0			461
+
+#define SRST_HDMITX0_REF		462
+#define SRST_P_HDMITX1			463
+#define SRST_HDMITX1_REF		464
+#define SRST_A_HDMIRX			465
+#define SRST_P_HDMIRX			466
+#define SRST_HDMIRX_REF			467
+
+#define SRST_P_EDP0			468
+#define SRST_EDP0_24M			469
+#define SRST_P_EDP1			470
+#define SRST_EDP1_24M			471
+#define SRST_M_I2S5_8CH_TX		472
+#define SRST_H_I2S5_8CH			473
+#define SRST_M_I2S6_8CH_TX		474
+
+#define SRST_M_I2S6_8CH_RX		475
+#define SRST_H_I2S6_8CH			476
+#define SRST_H_SPDIF3			477
+#define SRST_M_SPDIF3			478
+#define SRST_H_SPDIF4			479
+#define SRST_M_SPDIF4			480
+#define SRST_H_SPDIFRX0			481
+#define SRST_M_SPDIFRX0			482
+#define SRST_H_SPDIFRX1			483
+#define SRST_M_SPDIFRX1			484
+
+#define SRST_H_SPDIFRX2			485
+#define SRST_M_SPDIFRX2			486
+#define SRST_LINKSYM_HDMITXPHY0		487
+#define SRST_LINKSYM_HDMITXPHY1		488
+#define SRST_VO1_BRIDGE0		489
+#define SRST_VO1_BRIDGE1		490
+
+#define SRST_H_I2S9_8CH			491
+#define SRST_M_I2S9_8CH_RX		492
+#define SRST_H_I2S10_8CH		493
+#define SRST_M_I2S10_8CH_RX		494
+#define SRST_P_S_HDMIRX			495
+
+#define SRST_GPU			496
+#define SRST_SYS_GPU			497
+#define SRST_A_S_GPU_BIU		498
+#define SRST_A_M0_GPU_BIU		499
+#define SRST_A_M1_GPU_BIU		500
+#define SRST_A_M2_GPU_BIU		501
+#define SRST_A_M3_GPU_BIU		502
+#define SRST_P_GPU_BIU			503
+#define SRST_P_GPU_PVTM			504
+
+#define SRST_GPU_PVTM			505
+#define SRST_P_GPU_GRF			506
+#define SRST_GPU_PVTPLL			507
+#define SRST_GPU_JTAG			508
+
+#define SRST_A_AV1_BIU			509
+#define SRST_A_AV1			510
+#define SRST_P_AV1_BIU			511
+#define SRST_P_AV1			512
+
+#define SRST_A_DDR_BIU			513
+#define SRST_A_DMA2DDR			514
+#define SRST_A_DDR_SHAREMEM		515
+#define SRST_A_DDR_SHAREMEM_BIU		516
+#define SRST_A_CENTER_S200_BIU		517
+#define SRST_A_CENTER_S400_BIU		518
+#define SRST_H_AHB2APB			519
+#define SRST_H_CENTER_BIU		520
+#define SRST_F_DDR_CM0_CORE		521
+
+#define SRST_DDR_TIMER0			522
+#define SRST_DDR_TIMER1			523
+#define SRST_T_WDT_DDR			524
+#define SRST_T_DDR_CM0_JTAG		525
+#define SRST_P_CENTER_GRF		526
+#define SRST_P_AHB2APB			527
+#define SRST_P_WDT			528
+#define SRST_P_TIMER			529
+#define SRST_P_DMA2DDR			530
+#define SRST_P_SHAREMEM			531
+#define SRST_P_CENTER_BIU		532
+#define SRST_P_CENTER_CHANNEL_BIU	533
+
+#define SRST_P_USBDPGRF0		534
+#define SRST_P_USBDPPHY0		535
+#define SRST_P_USBDPGRF1		536
+#define SRST_P_USBDPPHY1		537
+#define SRST_P_HDPTX0			538
+#define SRST_P_HDPTX1			539
+#define SRST_P_APB2ASB_SLV_BOT_RIGHT	540
+#define SRST_P_USB2PHY_U3_0_GRF0	541
+#define SRST_P_USB2PHY_U3_1_GRF0	542
+#define SRST_P_USB2PHY_U2_0_GRF0	543
+#define SRST_P_USB2PHY_U2_1_GRF0	544
+#define SRST_HDPTX0_ROPLL		545
+#define SRST_HDPTX0_LCPLL		546
+#define SRST_HDPTX0			547
+#define SRST_HDPTX1_ROPLL		548
+
+#define SRST_HDPTX1_LCPLL		549
+#define SRST_HDPTX1			550
+#define SRST_HDPTX0_HDMIRXPHY_SET	551
+#define SRST_USBDP_COMBO_PHY0		552
+#define SRST_USBDP_COMBO_PHY0_LCPLL	553
+#define SRST_USBDP_COMBO_PHY0_ROPLL	554
+#define SRST_USBDP_COMBO_PHY0_PCS_HS	555
+#define SRST_USBDP_COMBO_PHY1		556
+#define SRST_USBDP_COMBO_PHY1_LCPLL	557
+#define SRST_USBDP_COMBO_PHY1_ROPLL	558
+#define SRST_USBDP_COMBO_PHY1_PCS_HS	559
+#define SRST_HDMIHDP0			560
+#define SRST_HDMIHDP1			561
+
+#define SRST_A_VO1USB_TOP_BIU		562
+#define SRST_H_VO1USB_TOP_BIU		563
+
+#define SRST_H_SDIO_BIU			564
+#define SRST_H_SDIO			565
+#define SRST_SDIO			566
+
+#define SRST_H_RGA3_BIU			567
+#define SRST_A_RGA3_BIU			568
+#define SRST_H_RGA3_1			569
+#define SRST_A_RGA3_1			570
+#define SRST_RGA3_1_CORE		571
+
+#define SRST_REF_PIPE_PHY0		572
+#define SRST_REF_PIPE_PHY1		573
+#define SRST_REF_PIPE_PHY2		574
+
+#define SRST_P_PHPTOP_CRU		575
+#define SRST_P_PCIE2_GRF0		576
+#define SRST_P_PCIE2_GRF1		577
+#define SRST_P_PCIE2_GRF2		578
+#define SRST_P_PCIE2_PHY0		579
+#define SRST_P_PCIE2_PHY1		580
+#define SRST_P_PCIE2_PHY2		581
+#define SRST_P_PCIE3_PHY		582
+#define SRST_P_APB2ASB_SLV_CHIP_TOP	583
+#define SRST_PCIE30_PHY			584
+
+#define SRST_H_PMU1_BIU			585
+#define SRST_P_PMU1_BIU			586
+#define SRST_H_PMU_CM0_BIU		587
+#define SRST_F_PMU_CM0_CORE		588
+#define SRST_T_PMU1_CM0_JTAG		589
+
+#define SRST_DDR_FAIL_SAFE		590
+#define SRST_P_CRU_PMU1			591
+#define SRST_P_PMU1_GRF			592
+#define SRST_P_PMU1_IOC			593
+#define SRST_P_PMU1WDT			594
+#define SRST_T_PMU1WDT			595
+#define SRST_P_PMU1TIMER		596
+#define SRST_PMU1TIMER0			597
+#define SRST_PMU1TIMER1			598
+#define SRST_P_PMU1PWM			599
+#define SRST_PMU1PWM			600
+
+#define SRST_P_I2C0			601
+#define SRST_I2C0			602
+#define SRST_S_UART0			603
+#define SRST_P_UART0			604
+#define SRST_H_I2S1_8CH			605
+#define SRST_M_I2S1_8CH_TX		606
+#define SRST_M_I2S1_8CH_RX		607
+#define SRST_H_PDM0			608
+#define SRST_PDM0			609
+
+#define SRST_H_VAD			610
+#define SRST_HDPTX0_INIT		611
+#define SRST_HDPTX0_CMN			612
+#define SRST_HDPTX0_LANE		613
+#define SRST_HDPTX1_INIT		614
+
+#define SRST_HDPTX1_CMN			615
+#define SRST_HDPTX1_LANE		616
+#define SRST_M_MIPI_DCPHY0		617
+#define SRST_S_MIPI_DCPHY0		618
+#define SRST_M_MIPI_DCPHY1		619
+#define SRST_S_MIPI_DCPHY1		620
+#define SRST_OTGPHY_U3_0		621
+#define SRST_OTGPHY_U3_1		622
+#define SRST_OTGPHY_U2_0		623
+#define SRST_OTGPHY_U2_1		624
+
+#define SRST_P_PMU0GRF			625
+#define SRST_P_PMU0IOC			626
+#define SRST_P_GPIO0			627
+#define SRST_GPIO0			628
+
+#define SRST_A_SECURE_NS_BIU		629
+#define SRST_H_SECURE_NS_BIU		630
+#define SRST_A_SECURE_S_BIU		631
+#define SRST_H_SECURE_S_BIU		632
+#define SRST_P_SECURE_S_BIU		633
+#define SRST_CRYPTO_CORE		634
+
+#define SRST_CRYPTO_PKA			635
+#define SRST_CRYPTO_RNG			636
+#define SRST_A_CRYPTO			637
+#define SRST_H_CRYPTO			638
+#define SRST_KEYLADDER_CORE		639
+#define SRST_KEYLADDER_RNG		640
+#define SRST_A_KEYLADDER		641
+#define SRST_H_KEYLADDER		642
+#define SRST_P_OTPC_S			643
+#define SRST_OTPC_S			644
+#define SRST_WDT_S			645
+
+#define SRST_T_WDT_S			646
+#define SRST_H_BOOTROM			647
+#define SRST_A_DCF			648
+#define SRST_P_DCF			649
+#define SRST_H_BOOTROM_NS		650
+#define SRST_P_KEYLADDER		651
+#define SRST_H_TRNG_S			652
+
+#define SRST_H_TRNG_NS			653
+#define SRST_D_SDMMC_BUFFER		654
+#define SRST_H_SDMMC			655
+#define SRST_H_SDMMC_BUFFER		656
+#define SRST_SDMMC			657
+#define SRST_P_TRNG_CHK			658
+#define SRST_TRNG_S			659
+
+#endif
diff --git a/dts/include/dt-bindings/reset/tegra234-reset.h b/dts/include/dt-bindings/reset/tegra234-reset.h
index d48d22b2bc..85cc423a7b 100644
--- a/dts/include/dt-bindings/reset/tegra234-reset.h
+++ b/dts/include/dt-bindings/reset/tegra234-reset.h
@@ -10,14 +10,29 @@
  * @brief Identifiers for Resets controllable by firmware
  * @{
  */
+#define TEGRA234_RESET_ACTMON			1U
+#define TEGRA234_RESET_ADSP_ALL			2U
+#define TEGRA234_RESET_DSI_CORE			3U
+#define TEGRA234_RESET_CAN1			4U
+#define TEGRA234_RESET_CAN2			5U
+#define TEGRA234_RESET_DLA0			6U
+#define TEGRA234_RESET_DLA1			7U
+#define TEGRA234_RESET_DPAUX			8U
+#define TEGRA234_RESET_OFA			9U
+#define TEGRA234_RESET_NVJPG1			10U
 #define TEGRA234_RESET_PEX1_CORE_6		11U
 #define TEGRA234_RESET_PEX1_CORE_6_APB		12U
 #define TEGRA234_RESET_PEX1_COMMON_APB		13U
 #define TEGRA234_RESET_PEX2_CORE_7		14U
 #define TEGRA234_RESET_PEX2_CORE_7_APB		15U
+#define TEGRA234_RESET_NVDISPLAY		16U
+#define TEGRA234_RESET_EQOS			17U
 #define TEGRA234_RESET_GPCDMA			18U
+#define TEGRA234_RESET_GPU			19U
 #define TEGRA234_RESET_HDA			20U
 #define TEGRA234_RESET_HDACODEC			21U
+#define TEGRA234_RESET_EQOS_MACSEC		22U
+#define TEGRA234_RESET_EQOS_MACSEC_SECURE	23U
 #define TEGRA234_RESET_I2C1			24U
 #define TEGRA234_RESET_PEX2_CORE_8		25U
 #define TEGRA234_RESET_PEX2_CORE_8_APB		26U
@@ -30,15 +45,36 @@
 #define TEGRA234_RESET_I2C7			33U
 #define TEGRA234_RESET_I2C8			34U
 #define TEGRA234_RESET_I2C9			35U
+#define TEGRA234_RESET_ISP			36U
+#define TEGRA234_RESET_MIPI_CAL			37U
+#define TEGRA234_RESET_MPHY_CLK_CTL		38U
+#define TEGRA234_RESET_MPHY_L0_RX		39U
+#define TEGRA234_RESET_MPHY_L0_TX		40U
+#define TEGRA234_RESET_MPHY_L1_RX		41U
+#define TEGRA234_RESET_MPHY_L1_TX		42U
+#define TEGRA234_RESET_NVCSI			43U
+#define TEGRA234_RESET_NVDEC			44U
 #define TEGRA234_RESET_MGBE0_PCS		45U
 #define TEGRA234_RESET_MGBE0_MAC		46U
+#define TEGRA234_RESET_MGBE0_MACSEC		47U
+#define TEGRA234_RESET_MGBE0_MACSEC_SECURE	48U
 #define TEGRA234_RESET_MGBE1_PCS		49U
 #define TEGRA234_RESET_MGBE1_MAC		50U
+#define TEGRA234_RESET_MGBE1_MACSEC		51U
+#define TEGRA234_RESET_MGBE1_MACSEC_SECURE	52U
 #define TEGRA234_RESET_MGBE2_PCS		53U
 #define TEGRA234_RESET_MGBE2_MAC		54U
+#define TEGRA234_RESET_MGBE2_MACSEC		55U
 #define TEGRA234_RESET_PEX2_CORE_10		56U
 #define TEGRA234_RESET_PEX2_CORE_10_APB		57U
 #define TEGRA234_RESET_PEX2_COMMON_APB		58U
+#define TEGRA234_RESET_NVENC			59U
+#define TEGRA234_RESET_MGBE2_MACSEC_SECURE	60U
+#define TEGRA234_RESET_NVJPG			61U
+#define TEGRA234_RESET_LA			64U
+#define TEGRA234_RESET_HWPM			65U
+#define TEGRA234_RESET_PVA0_ALL			66U
+#define TEGRA234_RESET_CEC			67U
 #define TEGRA234_RESET_PWM1			68U
 #define TEGRA234_RESET_PWM2			69U
 #define TEGRA234_RESET_PWM3			70U
@@ -49,11 +85,43 @@
 #define TEGRA234_RESET_PWM8			75U
 #define TEGRA234_RESET_QSPI0			76U
 #define TEGRA234_RESET_QSPI1			77U
+#define TEGRA234_RESET_I2S7			78U
+#define TEGRA234_RESET_I2S8			79U
+#define TEGRA234_RESET_SCE_ALL			80U
+#define TEGRA234_RESET_RCE_ALL			81U
+#define TEGRA234_RESET_SDMMC1			82U
+#define TEGRA234_RESET_RSVD_83			83U
+#define TEGRA234_RESET_RSVD_84			84U
 #define TEGRA234_RESET_SDMMC4			85U
 #define TEGRA234_RESET_MGBE3_PCS		87U
 #define TEGRA234_RESET_MGBE3_MAC		88U
+#define TEGRA234_RESET_MGBE3_MACSEC		89U
+#define TEGRA234_RESET_MGBE3_MACSEC_SECURE	90U
+#define TEGRA234_RESET_SPI1			91U
+#define TEGRA234_RESET_SPI2			92U
+#define TEGRA234_RESET_SPI3			93U
+#define TEGRA234_RESET_SPI4			94U
+#define TEGRA234_RESET_TACH0			95U
+#define TEGRA234_RESET_TACH1			96U
+#define TEGRA234_RESET_SPI5			97U
+#define TEGRA234_RESET_TSEC			98U
+#define TEGRA234_RESET_UARTI			99U
 #define TEGRA234_RESET_UARTA			100U
-#define TEGRA234_RESET_VIC                      113U
+#define TEGRA234_RESET_UARTB			101U
+#define TEGRA234_RESET_UARTC			102U
+#define TEGRA234_RESET_UARTD			103U
+#define TEGRA234_RESET_UARTE			104U
+#define TEGRA234_RESET_UARTF			105U
+#define TEGRA234_RESET_UARTJ			106U
+#define TEGRA234_RESET_UARTH			107U
+#define TEGRA234_RESET_UFSHC			108U
+#define TEGRA234_RESET_UFSHC_AXI_M		109U
+#define TEGRA234_RESET_UFSHC_LP_SEQ		110U
+#define TEGRA234_RESET_RSVD_111			111U
+#define TEGRA234_RESET_VI			112U
+#define TEGRA234_RESET_VIC			113U
+#define TEGRA234_RESET_XUSB_PADCTL		114U
+#define TEGRA234_RESET_VI2			115U
 #define TEGRA234_RESET_PEX0_CORE_0		116U
 #define TEGRA234_RESET_PEX0_CORE_1		117U
 #define TEGRA234_RESET_PEX0_CORE_2		118U
@@ -65,8 +133,49 @@
 #define TEGRA234_RESET_PEX0_CORE_3_APB		124U
 #define TEGRA234_RESET_PEX0_CORE_4_APB		125U
 #define TEGRA234_RESET_PEX0_COMMON_APB		126U
+#define TEGRA234_RESET_RSVD_127			127U
+#define TEGRA234_RESET_NVHS_UPHY_PLL1		128U
 #define TEGRA234_RESET_PEX1_CORE_5		129U
 #define TEGRA234_RESET_PEX1_CORE_5_APB		130U
+#define TEGRA234_RESET_GBE_UPHY			131U
+#define TEGRA234_RESET_GBE_UPHY_PM		132U
+#define TEGRA234_RESET_NVHS_UPHY		133U
+#define TEGRA234_RESET_NVHS_UPHY_PLL0		134U
+#define TEGRA234_RESET_NVHS_UPHY_L0		135U
+#define TEGRA234_RESET_NVHS_UPHY_L1		136U
+#define TEGRA234_RESET_NVHS_UPHY_L2		137U
+#define TEGRA234_RESET_NVHS_UPHY_L3		138U
+#define TEGRA234_RESET_NVHS_UPHY_L4		139U
+#define TEGRA234_RESET_NVHS_UPHY_L5		140U
+#define TEGRA234_RESET_NVHS_UPHY_L6		141U
+#define TEGRA234_RESET_NVHS_UPHY_L7		142U
+#define TEGRA234_RESET_NVHS_UPHY_PM		143U
+#define TEGRA234_RESET_DMIC5			144U
+#define TEGRA234_RESET_APE			145U
+#define TEGRA234_RESET_PEX_USB_UPHY		146U
+#define TEGRA234_RESET_PEX_USB_UPHY_L0		147U
+#define TEGRA234_RESET_PEX_USB_UPHY_L1		148U
+#define TEGRA234_RESET_PEX_USB_UPHY_L2		149U
+#define TEGRA234_RESET_PEX_USB_UPHY_L3		150U
+#define TEGRA234_RESET_PEX_USB_UPHY_L4		151U
+#define TEGRA234_RESET_PEX_USB_UPHY_L5		152U
+#define TEGRA234_RESET_PEX_USB_UPHY_L6		153U
+#define TEGRA234_RESET_PEX_USB_UPHY_L7		154U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL0	159U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL1	160U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL2	161U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL3	162U
+#define TEGRA234_RESET_GBE_UPHY_L0		163U
+#define TEGRA234_RESET_GBE_UPHY_L1		164U
+#define TEGRA234_RESET_GBE_UPHY_L2		165U
+#define TEGRA234_RESET_GBE_UPHY_L3		166U
+#define TEGRA234_RESET_GBE_UPHY_L4		167U
+#define TEGRA234_RESET_GBE_UPHY_L5		168U
+#define TEGRA234_RESET_GBE_UPHY_L6		169U
+#define TEGRA234_RESET_GBE_UPHY_L7		170U
+#define TEGRA234_RESET_GBE_UPHY_PLL0		171U
+#define TEGRA234_RESET_GBE_UPHY_PLL1		172U
+#define TEGRA234_RESET_GBE_UPHY_PLL2		173U
 
 /** @} */
 
diff --git a/dts/src/arm/am335x-baltos-leds.dtsi b/dts/src/arm/am335x-baltos-leds.dtsi
index 9a79f727ba..025014657d 100644
--- a/dts/src/arm/am335x-baltos-leds.dtsi
+++ b/dts/src/arm/am335x-baltos-leds.dtsi
@@ -17,18 +17,18 @@
 
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "onrisc:red:power";
 			linux,default-trigger = "default-on";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		wlan {
+		led-wlan {
 			label = "onrisc:blue:wlan";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		app {
+		led-app {
 			label = "onrisc:green:app";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/dts/src/arm/am335x-boneblack-hdmi.dtsi b/dts/src/arm/am335x-boneblack-hdmi.dtsi
index 7cfddada93..486f24deb8 100644
--- a/dts/src/arm/am335x-boneblack-hdmi.dtsi
+++ b/dts/src/arm/am335x-boneblack-hdmi.dtsi
@@ -85,8 +85,13 @@
 		audio-ports = <	TDA998x_I2S	0x03>;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
-				hdmi_0: endpoint@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
 					remote-endpoint = <&lcdc_0>;
 				};
 			};
diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts
index 25c6ac9913..5beabaa5ff 100644
--- a/dts/src/arm/am335x-evm.dts
+++ b/dts/src/arm/am335x-evm.dts
@@ -126,7 +126,7 @@
 		backlight = <&backlight>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
@@ -544,7 +544,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts
index 9c458e5a95..5b3278c0c4 100644
--- a/dts/src/arm/am335x-evmsk.dts
+++ b/dts/src/arm/am335x-evmsk.dts
@@ -191,7 +191,7 @@
 		backlight = <&lcd_bl>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
diff --git a/dts/src/arm/am335x-guardian.dts b/dts/src/arm/am335x-guardian.dts
index f635626656..b357364e93 100644
--- a/dts/src/arm/am335x-guardian.dts
+++ b/dts/src/arm/am335x-guardian.dts
@@ -103,8 +103,9 @@
 
 	};
 
-	guardian_beeper: dmtimer-pwm@7 {
+	guardian_beeper: pwm-7 {
 		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
 		ti,timers = <&timer7>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&guardian_beeper_pins>;
diff --git a/dts/src/arm/am335x-igep0033.dtsi b/dts/src/arm/am335x-igep0033.dtsi
index cc14415a4e..3fddf80dcf 100644
--- a/dts/src/arm/am335x-igep0033.dtsi
+++ b/dts/src/arm/am335x-igep0033.dtsi
@@ -168,7 +168,7 @@
 		/* MTD partition table */
 		partition@0 {
 			label = "SPL";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 
 		partition@1 {
@@ -188,7 +188,7 @@
 
 		partition@4 {
 			label = "File System";
-			reg = <0x00780000 0x007880000>;
+			reg = <0x00780000 0x07880000>;
 		};
 	};
 };
diff --git a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi
index 7b40ca9483..49e280b424 100644
--- a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi
+++ b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi
@@ -16,11 +16,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
diff --git a/dts/src/arm/am335x-moxa-uc-8100-common.dtsi b/dts/src/arm/am335x-moxa-uc-8100-common.dtsi
index e0364adb83..7d00e8b20f 100644
--- a/dts/src/arm/am335x-moxa-uc-8100-common.dtsi
+++ b/dts/src/arm/am335x-moxa-uc-8100-common.dtsi
@@ -21,11 +21,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
diff --git a/dts/src/arm/am335x-myirtech-myd.dts b/dts/src/arm/am335x-myirtech-myd.dts
index 9d81d4cc68..425ad9b81a 100644
--- a/dts/src/arm/am335x-myirtech-myd.dts
+++ b/dts/src/arm/am335x-myirtech-myd.dts
@@ -161,8 +161,13 @@
 		#sound-dai-cells = <0>;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
-				hdmi_0: endpoint@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
 					remote-endpoint = <&lcdc_0>;
 				};
 			};
diff --git a/dts/src/arm/am335x-pepper.dts b/dts/src/arm/am335x-pepper.dts
index 8691eec33b..a4509e9e10 100644
--- a/dts/src/arm/am335x-pepper.dts
+++ b/dts/src/arm/am335x-pepper.dts
@@ -555,11 +555,11 @@
 };
 
 &usb0 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &usb1 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &am33xx_pinmux {
diff --git a/dts/src/arm/am335x-pocketbeagle.dts b/dts/src/arm/am335x-pocketbeagle.dts
index 5e415d8ffd..0ba4883cd4 100644
--- a/dts/src/arm/am335x-pocketbeagle.dts
+++ b/dts/src/arm/am335x-pocketbeagle.dts
@@ -23,28 +23,28 @@
 
 		compatible = "gpio-leds";
 
-		usr0 {
+		led-usr0 {
 			label = "beaglebone:green:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		usr1 {
+		led-usr1 {
 			label = "beaglebone:green:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		usr2 {
+		led-usr2 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		usr3 {
+		led-usr3 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/dts/src/arm/am3517-evm.dts b/dts/src/arm/am3517-evm.dts
index 35b653014f..11618aa501 100644
--- a/dts/src/arm/am3517-evm.dts
+++ b/dts/src/arm/am3517-evm.dts
@@ -26,12 +26,12 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc_fixed: vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
@@ -150,7 +150,7 @@
 		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
 	};
 
-	pwm11: dmtimer-pwm@11 {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
@@ -176,7 +176,7 @@
 };
 
 &davinci_mdio {
-	     status = "okay";
+	status = "okay";
 };
 
 &dss {
@@ -227,7 +227,7 @@
 };
 
 &mmc3 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &usbhshost {
diff --git a/dts/src/arm/am3517.dtsi b/dts/src/arm/am3517.dtsi
index cb316135bc..823f63502e 100644
--- a/dts/src/arm/am3517.dtsi
+++ b/dts/src/arm/am3517.dtsi
@@ -49,13 +49,35 @@
 	};
 
 	ocp@68000000 {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
+		target-module@5c040000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5c040400 0x4>,
+			      <0x5c040404 0x4>,
+			      <0x5c040408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&hsotgusb_ick_am35xx>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5c040000 0x1000>;
+
+			am35x_otg_hs: am35x_otg_hs@0 {
+				compatible = "ti,omap3-musb";
+				status = "disabled";
+				reg = <0 0x1000>;
+				interrupts = <71>;
+				interrupt-names = "mc";
+			};
 		};
 
 		davinci_emac: ethernet@5c000000 {
@@ -154,7 +176,7 @@
 };
 
 /* Table Table 5-79 of the TRM shows 480ab000 is reserved */
-&usb_otg_hs {
+&usb_otg_target {
 	status = "disabled";
 };
 
diff --git a/dts/src/arm/am437x-idk-evm.dts b/dts/src/arm/am437x-idk-evm.dts
index 123a95f875..e46cf2a9d0 100644
--- a/dts/src/arm/am437x-idk-evm.dts
+++ b/dts/src/arm/am437x-idk-evm.dts
@@ -452,7 +452,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/dts/src/arm/am437x-sk-evm.dts b/dts/src/arm/am437x-sk-evm.dts
index 036f3831dc..511a02e13e 100644
--- a/dts/src/arm/am437x-sk-evm.dts
+++ b/dts/src/arm/am437x-sk-evm.dts
@@ -763,7 +763,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts
index 27f4ce8555..9fc915a258 100644
--- a/dts/src/arm/am43x-epos-evm.dts
+++ b/dts/src/arm/am43x-epos-evm.dts
@@ -919,7 +919,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/dts/src/arm/am57xx-idk-common.dtsi b/dts/src/arm/am57xx-idk-common.dtsi
index c06eda8172..7f092a8811 100644
--- a/dts/src/arm/am57xx-idk-common.dtsi
+++ b/dts/src/arm/am57xx-idk-common.dtsi
@@ -542,7 +542,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000040000>;
+			reg = <0x00000000 0x00040000>;
 		};
 		partition@1 {
 			label = "QSPI.u-boot";
diff --git a/dts/src/arm/armada-370-dlink-dns327l.dts b/dts/src/arm/armada-370-dlink-dns327l.dts
index 2008c6eaaa..561195b749 100644
--- a/dts/src/arm/armada-370-dlink-dns327l.dts
+++ b/dts/src/arm/armada-370-dlink-dns327l.dts
@@ -86,19 +86,19 @@
 
 		pinctrl-names = "default";
 
-		sata-r-amber-pin {
+		led-sata-r-amber {
 			label = "dns327l:amber:sata-r";
 			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		sata-l-amber-pin {
+		led-sata-l-amber {
 			label = "dns327l:amber:sata-l";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		backup-led-pin {
+		led-backup {
 			label = "dns327l:white:usb";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/dts/src/arm/armada-370-netgear-rn102.dts b/dts/src/arm/armada-370-netgear-rn102.dts
index b0b640b7de..079b37cf14 100644
--- a/dts/src/arm/armada-370-netgear-rn102.dts
+++ b/dts/src/arm/armada-370-netgear-rn102.dts
@@ -85,11 +85,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/dts/src/arm/armada-370-netgear-rn104.dts b/dts/src/arm/armada-370-netgear-rn104.dts
index 85e2e9e27a..d752ac1d7b 100644
--- a/dts/src/arm/armada-370-netgear-rn104.dts
+++ b/dts/src/arm/armada-370-netgear-rn104.dts
@@ -94,11 +94,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/dts/src/arm/armada-370-rd.dts b/dts/src/arm/armada-370-rd.dts
index 6ba7699b69..be005c9f42 100644
--- a/dts/src/arm/armada-370-rd.dts
+++ b/dts/src/arm/armada-370-rd.dts
@@ -61,8 +61,8 @@
 				status = "okay";
 				phy-mode = "rgmii-id";
 				fixed-link {
-					   speed = <1000>;
-					   full-duplex;
+					speed = <1000>;
+					full-duplex;
 				};
 			};
 
@@ -155,18 +155,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan3";
+				reg = <3>;
+				label = "lan3";
 			};
 
 			port@5 {
diff --git a/dts/src/arm/armada-370-seagate-nas-4bay.dts b/dts/src/arm/armada-370-seagate-nas-4bay.dts
index 3cf70c72c5..9cb69999b1 100644
--- a/dts/src/arm/armada-370-seagate-nas-4bay.dts
+++ b/dts/src/arm/armada-370-seagate-nas-4bay.dts
@@ -72,11 +72,11 @@
 	};
 
 	gpio-leds {
-		red-sata2 {
+		led-red-sata2 {
 			label = "dart:red:sata2";
 			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
 		};
-		red-sata3 {
+		led-red-sata3 {
 			label = "dart:red:sata3";
 			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/armada-370-seagate-nas-xbay.dtsi b/dts/src/arm/armada-370-seagate-nas-xbay.dtsi
index 866b8630d4..822f107349 100644
--- a/dts/src/arm/armada-370-seagate-nas-xbay.dtsi
+++ b/dts/src/arm/armada-370-seagate-nas-xbay.dtsi
@@ -132,21 +132,21 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		white-power {
+		led-white-power {
 			label = "dart:white:power";
 			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 
 		};
-		red-power {
+		led-red-power {
 			label = "dart:red:power";
 			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		};
-		red-sata0 {
+		led-red-sata0 {
 			label = "dart:red:sata0";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		red-sata1 {
+		led-red-sata1 {
 			label = "dart:red:sata1";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi
index 702a85af20..124a8ba279 100644
--- a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi
+++ b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi
@@ -107,7 +107,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-sata0 {
+		led-red-sata0 {
 			label = "cumulus:red:sata0";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/dts/src/arm/armada-370-synology-ds213j.dts b/dts/src/arm/armada-370-synology-ds213j.dts
index e72b8ed4b9..f0893cc066 100644
--- a/dts/src/arm/armada-370-synology-ds213j.dts
+++ b/dts/src/arm/armada-370-synology-ds213j.dts
@@ -91,9 +91,9 @@
 			};
 
 			ethernet@70000 {
-			       status = "okay";
-			       phy = <&phy1>;
-			       phy-mode = "sgmii";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
 			};
 
 			sata@a0000 {
diff --git a/dts/src/arm/armada-370.dtsi b/dts/src/arm/armada-370.dtsi
index 9dc928859a..2013a5ccec 100644
--- a/dts/src/arm/armada-370.dtsi
+++ b/dts/src/arm/armada-370.dtsi
@@ -84,7 +84,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/dts/src/arm/armada-375.dtsi b/dts/src/arm/armada-375.dtsi
index 929deaf312..ddc49547d7 100644
--- a/dts/src/arm/armada-375.dtsi
+++ b/dts/src/arm/armada-375.dtsi
@@ -178,6 +178,8 @@
 
 			/* Network controller */
 			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -187,15 +189,17 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0 {
+				eth0: ethernet-port@0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
 					status = "disabled";
 				};
 
-				eth1: eth1 {
+				eth1: ethernet-port@1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
 					status = "disabled";
 				};
 			};
@@ -592,7 +596,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/dts/src/arm/armada-380.dtsi b/dts/src/arm/armada-380.dtsi
index ce1dddb226..e94f22b0e9 100644
--- a/dts/src/arm/armada-380.dtsi
+++ b/dts/src/arm/armada-380.dtsi
@@ -89,7 +89,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -118,7 +118,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/dts/src/arm/armada-385-linksys-caiman.dts b/dts/src/arm/armada-385-linksys-caiman.dts
index a03050c970..88b2921fed 100644
--- a/dts/src/arm/armada-385-linksys-caiman.dts
+++ b/dts/src/arm/armada-385-linksys-caiman.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "caiman:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "caiman:white:sata";
 	};
 };
diff --git a/dts/src/arm/armada-385-linksys-cobra.dts b/dts/src/arm/armada-385-linksys-cobra.dts
index e3e4877a6f..88200f930d 100644
--- a/dts/src/arm/armada-385-linksys-cobra.dts
+++ b/dts/src/arm/armada-385-linksys-cobra.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "cobra:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "cobra:white:sata";
 	};
 };
diff --git a/dts/src/arm/armada-385-linksys-rango.dts b/dts/src/arm/armada-385-linksys-rango.dts
index 3c4af57ec2..4ab45f294d 100644
--- a/dts/src/arm/armada-385-linksys-rango.dts
+++ b/dts/src/arm/armada-385-linksys-rango.dts
@@ -54,22 +54,22 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 		label = "rango:white:power";
 	};
 
-	sata {
+	led-sata {
 		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		label = "rango:white:sata";
 	};
 
-	wlan_2g {
+	led-wlan_2g {
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_2g";
 	};
 
-	wlan_5g {
+	led-wlan_5g {
 		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_5g";
 	};
diff --git a/dts/src/arm/armada-385-linksys-shelby.dts b/dts/src/arm/armada-385-linksys-shelby.dts
index 3451cd3e5d..f1b1f22413 100644
--- a/dts/src/arm/armada-385-linksys-shelby.dts
+++ b/dts/src/arm/armada-385-linksys-shelby.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "shelby:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "shelby:white:sata";
 	};
 };
diff --git a/dts/src/arm/armada-385-linksys.dtsi b/dts/src/arm/armada-385-linksys.dtsi
index 116aca5e68..85e8d966f6 100644
--- a/dts/src/arm/armada-385-linksys.dtsi
+++ b/dts/src/arm/armada-385-linksys.dtsi
@@ -71,12 +71,12 @@
 		pinctrl-0 = <&gpio_leds_pins>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sata {
+		led-sata {
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "disk-activity";
diff --git a/dts/src/arm/armada-385-synology-ds116.dts b/dts/src/arm/armada-385-synology-ds116.dts
index 2622af73c9..ea91ff964d 100644
--- a/dts/src/arm/armada-385-synology-ds116.dts
+++ b/dts/src/arm/armada-385-synology-ds116.dts
@@ -149,7 +149,7 @@
 			 * sata0, and accesses to SATA disk 0 make it blink so it
 			 * doesn't need to be declared here.
 			 */
-			orange {
+			led-orange {
 				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 				label = "ds116:orange:disk";
 				default-state = "off";
diff --git a/dts/src/arm/armada-385-turris-omnia.dts b/dts/src/arm/armada-385-turris-omnia.dts
index 72ac807cae..0c1f238e4c 100644
--- a/dts/src/arm/armada-385-turris-omnia.dts
+++ b/dts/src/arm/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -483,7 +489,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
diff --git a/dts/src/arm/armada-385.dtsi b/dts/src/arm/armada-385.dtsi
index 83392b92da..be8d607c59 100644
--- a/dts/src/arm/armada-385.dtsi
+++ b/dts/src/arm/armada-385.dtsi
@@ -93,7 +93,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -121,7 +121,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -152,7 +152,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi
index 446861b6b1..12933eff41 100644
--- a/dts/src/arm/armada-38x.dtsi
+++ b/dts/src/arm/armada-38x.dtsi
@@ -304,7 +304,7 @@
 			};
 
 			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
+				compatible = "marvell,armadaxp-gpio",
 					     "marvell,orion-gpio";
 				reg = <0x18100 0x40>, <0x181c0 0x08>;
 				reg-names = "gpio", "pwm";
@@ -323,7 +323,7 @@
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
+				compatible = "marvell,armadaxp-gpio",
 					     "marvell,orion-gpio";
 				reg = <0x18140 0x40>, <0x181c8 0x08>;
 				reg-names = "gpio", "pwm";
diff --git a/dts/src/arm/armada-39x.dtsi b/dts/src/arm/armada-39x.dtsi
index 923b035a3a..1e05208d9f 100644
--- a/dts/src/arm/armada-39x.dtsi
+++ b/dts/src/arm/armada-39x.dtsi
@@ -213,7 +213,7 @@
 			};
 
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
 				reg = <0x18100 0x40>;
 				ngpios = <32>;
 				gpio-controller;
@@ -227,7 +227,7 @@
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
 				reg = <0x18140 0x40>;
 				ngpios = <28>;
 				gpio-controller;
@@ -463,7 +463,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -492,7 +492,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -524,7 +524,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/dts/src/arm/armada-xp-98dx3236.dtsi b/dts/src/arm/armada-xp-98dx3236.dtsi
index b21ffb819b..7a7e2066c4 100644
--- a/dts/src/arm/armada-xp-98dx3236.dtsi
+++ b/dts/src/arm/armada-xp-98dx3236.dtsi
@@ -296,6 +296,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/dts/src/arm/armada-xp-linksys-mamba.dts b/dts/src/arm/armada-xp-linksys-mamba.dts
index 622ac40dd1..dbe8dfe236 100644
--- a/dts/src/arm/armada-xp-linksys-mamba.dts
+++ b/dts/src/arm/armada-xp-linksys-mamba.dts
@@ -195,7 +195,7 @@
 		pinctrl-0 = <&power_led_pin>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "mamba:white:power";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/dts/src/arm/armada-xp-mv78230.dtsi b/dts/src/arm/armada-xp-mv78230.dtsi
index bf9360f41e..5ea9d509cd 100644
--- a/dts/src/arm/armada-xp-mv78230.dtsi
+++ b/dts/src/arm/armada-xp-mv78230.dtsi
@@ -107,7 +107,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -135,7 +135,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -163,7 +163,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -191,7 +191,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/dts/src/arm/armada-xp-mv78260.dtsi b/dts/src/arm/armada-xp-mv78260.dtsi
index 0714af52e6..6c6fbb9faf 100644
--- a/dts/src/arm/armada-xp-mv78260.dtsi
+++ b/dts/src/arm/armada-xp-mv78260.dtsi
@@ -122,7 +122,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -150,7 +150,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -178,7 +178,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -206,7 +206,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -234,7 +234,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -262,7 +262,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -290,7 +290,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -318,7 +318,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/dts/src/arm/armada-xp-netgear-rn2120.dts b/dts/src/arm/armada-xp-netgear-rn2120.dts
index 8ea73587db..31933f8114 100644
--- a/dts/src/arm/armada-xp-netgear-rn2120.dts
+++ b/dts/src/arm/armada-xp-netgear-rn2120.dts
@@ -121,11 +121,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	gpio-leds {
diff --git a/dts/src/arm/armada-xp.dtsi b/dts/src/arm/armada-xp.dtsi
index 6c19984d66..4297482da6 100644
--- a/dts/src/arm/armada-xp.dtsi
+++ b/dts/src/arm/armada-xp.dtsi
@@ -260,6 +260,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/dts/src/arm/aspeed-bmc-ampere-mtjade.dts b/dts/src/arm/aspeed-bmc-ampere-mtjade.dts
index d127cbcc79..0a51d2e32f 100644
--- a/dts/src/arm/aspeed-bmc-ampere-mtjade.dts
+++ b/dts/src/arm/aspeed-bmc-ampere-mtjade.dts
@@ -342,6 +342,10 @@
 
 &i2c0 {
 	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
 };
 
 &i2c1 {
@@ -350,6 +354,14 @@
 
 &i2c2 {
 	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
 };
 
 &i2c3 {
diff --git a/dts/src/arm/aspeed-bmc-ampere-mtmitchell.dts b/dts/src/arm/aspeed-bmc-ampere-mtmitchell.dts
index 606cd4be24..4b91600eaf 100644
--- a/dts/src/arm/aspeed-bmc-ampere-mtmitchell.dts
+++ b/dts/src/arm/aspeed-bmc-ampere-mtmitchell.dts
@@ -445,6 +445,10 @@
 
 &i2c11 {
 	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
 };
 
 &i2c14 {
diff --git a/dts/src/arm/aspeed-bmc-delta-ahe50dc.dts b/dts/src/arm/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 0000000000..6600f7e9bf
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "lm25066";						\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout0 {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/dts/src/arm/aspeed-bmc-facebook-bletchley.dts b/dts/src/arm/aspeed-bmc-facebook-bletchley.dts
index 1fc3e7cbf0..a619eec706 100644
--- a/dts/src/arm/aspeed-bmc-facebook-bletchley.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-bletchley.dts
@@ -60,7 +60,7 @@
 		compatible = "gpio-leds";
 		sys_log_id {
 			default-state = "off";
-			gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -191,6 +191,95 @@
 			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &mac2 {
@@ -302,17 +391,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -388,17 +477,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -474,17 +563,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -560,17 +649,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -646,17 +735,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -732,17 +821,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -863,6 +952,9 @@
 };
 
 &gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
 	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
@@ -892,11 +984,11 @@
 	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
 			"ALERT_SLED3_N","ALERT_SLED4_N",
 			"ALERT_SLED5_N","ALERT_SLED6_N",
-			"","",
+			"","USB_DEBUG_PWR_BTN_N",
 	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
 			"LED_POSTCODE_2","LED_POSTCODE_3",
 			"LED_POSTCODE_4","LED_POSTCODE_5",
-			"LED_POSTCODE_5","LED_POSTCODE_7",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
 	/*O0-O7*/	"","","","",
 			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
 	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
@@ -953,3 +1045,22 @@
 &ehci0 {
 	status = "okay";
 };
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
diff --git a/dts/src/arm/aspeed-bmc-facebook-cloudripper.dts b/dts/src/arm/aspeed-bmc-facebook-cloudripper.dts
index 9c6271a17a..5cd060029e 100644
--- a/dts/src/arm/aspeed-bmc-facebook-cloudripper.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-cloudripper.dts
@@ -77,7 +77,7 @@
 		i2c55 = &imux55;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <2>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
 			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/aspeed-bmc-facebook-elbert.dts b/dts/src/arm/aspeed-bmc-facebook-elbert.dts
index 8e1a1d1b28..b5cd4c7800 100644
--- a/dts/src/arm/aspeed-bmc-facebook-elbert.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-elbert.dts
@@ -44,7 +44,7 @@
 		stdout-path = &uart5;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
 	};
diff --git a/dts/src/arm/aspeed-bmc-facebook-fuji.dts b/dts/src/arm/aspeed-bmc-facebook-fuji.dts
index af58a73bbc..6b319f34a9 100644
--- a/dts/src/arm/aspeed-bmc-facebook-fuji.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-fuji.dts
@@ -207,7 +207,7 @@
 		i2c143 = &imux143;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <3>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
 			   <0>,	/* device reg=<1> does not exist */
diff --git a/dts/src/arm/aspeed-bmc-facebook-wedge400.dts b/dts/src/arm/aspeed-bmc-facebook-wedge400.dts
index a901c8be49..ed30594838 100644
--- a/dts/src/arm/aspeed-bmc-facebook-wedge400.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-wedge400.dts
@@ -67,7 +67,7 @@
 	 * full-duplex SPI transactions are not supported by ASPEED SPI
 	 * Controllers.
 	 */
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
diff --git a/dts/src/arm/aspeed-bmc-ibm-bonnell.dts b/dts/src/arm/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 0000000000..d1971ddf06
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "ibm,cffps";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "ibm,cffps";
+		reg = <0x59>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/dts/src/arm/aspeed-bmc-ibm-everest.dts b/dts/src/arm/aspeed-bmc-ibm-everest.dts
index a6a2bc3b85..1448ea895b 100644
--- a/dts/src/arm/aspeed-bmc-ibm-everest.dts
+++ b/dts/src/arm/aspeed-bmc-ibm-everest.dts
@@ -162,16 +162,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -179,6 +172,12 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
 		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
@@ -2551,6 +2550,11 @@
 
 			fsi_occ0: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -2695,6 +2699,11 @@
 
 			fsi_occ1: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -2839,6 +2848,11 @@
 
 			fsi_occ2: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -2983,6 +2997,11 @@
 
 			fsi_occ3: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3127,6 +3146,11 @@
 
 			fsi_occ4: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3271,6 +3295,11 @@
 
 			fsi_occ5: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3415,6 +3444,11 @@
 
 			fsi_occ6: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3559,6 +3593,11 @@
 
 			fsi_occ7: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
diff --git a/dts/src/arm/aspeed-bmc-ibm-rainier.dts b/dts/src/arm/aspeed-bmc-ibm-rainier.dts
index bf59a99623..20ef958698 100644
--- a/dts/src/arm/aspeed-bmc-ibm-rainier.dts
+++ b/dts/src/arm/aspeed-bmc-ibm-rainier.dts
@@ -95,14 +95,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -110,6 +105,13 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
 			compatible = "shared-dma-pool";
@@ -442,6 +444,11 @@
 
 			fsi_occ0: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -586,6 +593,11 @@
 
 			fsi_occ1: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -730,6 +742,11 @@
 
 			fsi_occ2: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -874,6 +891,11 @@
 
 			fsi_occ3: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -995,32 +1017,6 @@
 		reg = <0x4a>;
 	};
 
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard0-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard0-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
 	pca9546@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
@@ -1038,6 +1034,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 
 		i2c4mux0chn1: i2c@1 {
@@ -1077,58 +1099,6 @@
 		reg = <0x49>;
 	};
 
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard3-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard3-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9551@61 {
-		compatible = "nxp,pca9551";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard4-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard4-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
 	pca9546@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
@@ -1146,6 +1116,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 
 		i2c5mux0chn1: i2c@1 {
@@ -1157,6 +1153,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x51>;
 			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 	};
 };
@@ -2009,32 +2031,6 @@
 		reg = <0x49>;
 	};
 
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard10-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard10-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
 	pca9546@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
@@ -2052,6 +2048,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 
 		i2c11mux0chn1: i2c@1 {
diff --git a/dts/src/arm/aspeed-bmc-opp-mihawk.dts b/dts/src/arm/aspeed-bmc-opp-mihawk.dts
deleted file mode 100644
index 48776fb663..0000000000
--- a/dts/src/arm/aspeed-bmc-opp-mihawk.dts
+++ /dev/null
@@ -1,1381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Mihawk BMC";
-	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c215 = &bus6_mux215;
-		i2c216 = &bus6_mux216;
-		i2c217 = &bus6_mux217;
-		i2c218 = &bus6_mux218;
-		i2c219 = &bus6_mux219;
-		i2c220 = &bus6_mux220;
-		i2c221 = &bus6_mux221;
-		i2c222 = &bus6_mux222;
-		i2c223 = &bus7_mux223;
-		i2c224 = &bus7_mux224;
-		i2c225 = &bus7_mux225;
-		i2c226 = &bus7_mux226;
-		i2c227 = &bus7_mux227;
-		i2c228 = &bus7_mux228;
-		i2c229 = &bus7_mux229;
-		i2c230 = &bus7_mux230;
-		i2c231 = &bus9_mux231;
-		i2c232 = &bus9_mux232;
-		i2c233 = &bus9_mux233;
-		i2c234 = &bus9_mux234;
-		i2c235 = &bus9_mux235;
-		i2c236 = &bus9_mux236;
-		i2c237 = &bus9_mux237;
-		i2c238 = &bus9_mux238;
-		i2c239 = &bus10_mux239;
-		i2c240 = &bus10_mux240;
-		i2c241 = &bus10_mux241;
-		i2c242 = &bus10_mux242;
-		i2c243 = &bus10_mux243;
-		i2c244 = &bus10_mux244;
-		i2c245 = &bus10_mux245;
-		i2c246 = &bus10_mux246;
-		i2c247 = &bus12_mux247;
-		i2c248 = &bus12_mux248;
-		i2c249 = &bus12_mux249;
-		i2c250 = &bus12_mux250;
-		i2c251 = &bus13_mux251;
-		i2c252 = &bus13_mux252;
-		i2c253 = &bus13_mux253;
-		i2c254 = &bus13_mux254;
-		i2c255 = &bus13_mux255;
-		i2c256 = &bus13_mux256;
-		i2c257 = &bus13_mux257;
-		i2c258 = &bus13_mux258;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 2)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 0)>;
-		};
-
-		button-id {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fan4 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
-		};
-
-		fan5 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-	iio-hwmon-12v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	iio-hwmon-5v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>;
-	};
-
-	iio-hwmon-3v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 2>;
-	};
-
-	iio-hwmon-vdd0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>;
-	};
-
-	iio-hwmon-vdd1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 4>;
-	};
-
-	iio-hwmon-vcs0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>;
-	};
-
-	iio-hwmon-vcs1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 6>;
-	};
-
-	iio-hwmon-vdn0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	iio-hwmon-vdn1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 8>;
-	};
-
-	iio-hwmon-vio0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 9>;
-	};
-
-	iio-hwmon-vio1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 10>;
-	};
-
-	iio-hwmon-vddra {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	iio-hwmon-vddrb {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 13>;
-	};
-
-	iio-hwmon-vddrc {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-vddrd {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","","","","","","","",
-	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
-	/*F0-F7*/	"","id-button","","","","","air-water","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","checkstop","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","fsi-trans","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
-	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&i2c1 {
-	status = "disabled";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* SAMTEC P0 */
-	/* SAMTEC P1 */
-
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* APSS */
-	/* CPLD */
-
-	/* PCA9516 (repeater) ->
-	 *    CLK Buffer 9FGS9092
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    Power Supply 0
-	 *    Power Supply 1
-	 *    PCA 9552 LED
-	 */
-
-	power-supply@58 {
-		compatible = "ibm,cffps1";
-		reg = <0x58>;
-	};
-
-	power-supply@5b {
-		compatible = "ibm,cffps1";
-		reg = <0x5b>;
-	};
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c5 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c6 {
-	status = "okay";
-
-	/* pca9548 -> NVMe1 to 8 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus7_mux223: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus7_mux224: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus7_mux225: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus7_mux226: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus7_mux227: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus7_mux228: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus7_mux229: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus7_mux230: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* pca9548 -> NVMe9 to 16 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus6_mux215: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus6_mux216: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus6_mux217: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus6_mux218: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus6_mux219: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus6_mux220: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus6_mux221: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus6_mux222: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	*	PCIe x8  Slot3
-	*	PCIe x16 slot4
-	*	PCIe x8  slot5
-	*	I2C BMC RISER PCA9554
-	*	BMC SCL/SDA PCA9554
-	*	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux231: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus0-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus0";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux232: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus1-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus1";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux233: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux234: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux235: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus2-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus2";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux236: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus3-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus3";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux237: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux238: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	* 	PCIe x8  Slot8
-	* 	PCIe x16 slot9
-	* 	PCIe x8  slot10
-	* 	I2C BMC RISER PCA9554
-	* 	BMC SCL/SDA PCA9554
-	* 	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux239: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus4-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus4";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux240: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus5-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus5";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux241: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux242: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux243: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus6-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus6";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux244: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus7-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus7";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux245: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux246: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* TPM */
-	/* RTC RX8900CE */
-	/* FPGA for power sequence */
-	/* TMP275A */
-	/* TMP275A */
-	/* EMC1462 */
-
-	tpm@57 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x57>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	/* chip emc1462 use emc1403 driver */
-	emc1403@4c {
-		compatible = "smsc,emc1403";
-		reg = <0x4c>;
-	};
-
-};
-
-&i2c12 {
-	status = "okay";
-
-	/* pca9545 ->
-	*	SAS BP1
-	*	SAS BP2
-	*	NVMe BP
-	*	M.2 riser
-	*/
-
-	pca9545@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus12_mux247: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux248: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux249: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux250: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-	};
-
-};
-
-&i2c13 {
-	status = "okay";
-
-	/* pca9548 ->
-	*	NVMe BP
-	*	NVMe HDD17 to 24
-	*/
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		bus13_mux251: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus13_mux252: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus13_mux253: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus13_mux254: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus13_mux255: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus13_mux256: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus13_mux257: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus13_mux258: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
-
diff --git a/dts/src/arm/aspeed-g6.dtsi b/dts/src/arm/aspeed-g6.dtsi
index ebbcfe445d..cc2f8b7859 100644
--- a/dts/src/arm/aspeed-g6.dtsi
+++ b/dts/src/arm/aspeed-g6.dtsi
@@ -36,6 +36,10 @@
 		serial4 = &uart5;
 		serial5 = &vuart1;
 		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
 	};
 
 
diff --git a/dts/src/arm/ast2600-facebook-netbmc-common.dtsi b/dts/src/arm/ast2600-facebook-netbmc-common.dtsi
index 051de5bec3..31590d3186 100644
--- a/dts/src/arm/ast2600-facebook-netbmc-common.dtsi
+++ b/dts/src/arm/ast2600-facebook-netbmc-common.dtsi
@@ -25,7 +25,7 @@
 	 * full-duplex SPI transactions are not supported by ASPEED SPI
 	 * Controllers.
 	 */
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
diff --git a/dts/src/arm/at91-sam9x60ek.dts b/dts/src/arm/at91-sam9x60ek.dts
index 4ba52ba11d..d929c1ba57 100644
--- a/dts/src/arm/at91-sam9x60ek.dts
+++ b/dts/src/arm/at91-sam9x60ek.dts
@@ -76,7 +76,6 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
-		status = "okay";
 	};
 
 	vdd_1v15: fixed-regulator-vdd_1v15 {
@@ -85,7 +84,6 @@
 		regulator-min-microvolt = <1150000>;
 		regulator-max-microvolt = <1150000>;
 		regulator-always-on;
-		status = "okay";
 	};
 
 	vdd1_3v3: fixed-regulator-vdd1_3v3 {
@@ -94,7 +92,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
-		status = "okay";
 	};
 
 	vdd2_3v3: regulator-fixed-vdd2_3v3 {
@@ -103,7 +100,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
-		status = "okay";
 	};
 };
 
diff --git a/dts/src/arm/at91-sama7g5ek.dts b/dts/src/arm/at91-sama7g5ek.dts
index 3b25c67795..aa5cc0e98b 100644
--- a/dts/src/arm/at91-sama7g5ek.dts
+++ b/dts/src/arm/at91-sama7g5ek.dts
@@ -764,8 +764,9 @@
 &sdmmc0 {
 	bus-width = <8>;
 	non-removable;
-	no-1-8-v;
 	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
@@ -775,6 +776,8 @@
 	bus-width = <4>;
 	no-1-8-v;
 	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc1_default>;
 	status = "okay";
diff --git a/dts/src/arm/axp22x.dtsi b/dts/src/arm/axp22x.dtsi
index a020c12b28..f79650afd0 100644
--- a/dts/src/arm/axp22x.dtsi
+++ b/dts/src/arm/axp22x.dtsi
@@ -67,6 +67,12 @@
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
diff --git a/dts/src/arm/axp809.dtsi b/dts/src/arm/axp809.dtsi
index ab8e5f2d92..d134d4c00b 100644
--- a/dts/src/arm/axp809.dtsi
+++ b/dts/src/arm/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/dts/src/arm/axp81x.dtsi b/dts/src/arm/axp81x.dtsi
index b93387b0c1..ebaf1c3ce8 100644
--- a/dts/src/arm/axp81x.dtsi
+++ b/dts/src/arm/axp81x.dtsi
@@ -62,16 +62,6 @@
 		compatible = "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
@@ -144,15 +134,11 @@
 		};
 
 		reg_ldo_io0: ldo-io0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo-io1 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
diff --git a/dts/src/arm/bcm2711-rpi-4-b.dts b/dts/src/arm/bcm2711-rpi-4-b.dts
index 4432412044..d5f8823230 100644
--- a/dts/src/arm/bcm2711-rpi-4-b.dts
+++ b/dts/src/arm/bcm2711-rpi-4-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2711.dtsi"
 #include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-peripheral.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -14,20 +15,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	leds {
-		led-act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	sd_io_1v8_reg: sd_io_1v8_reg {
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
 		regulator-min-microvolt = <1800000>;
@@ -41,7 +29,7 @@
 		status = "okay";
 	};
 
-	sd_vcc_reg: sd_vcc_reg {
+	sd_vcc_reg: regulator-sd-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
@@ -156,6 +144,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pixelvalve0 {
 	status = "okay";
 };
diff --git a/dts/src/arm/bcm2711-rpi-400.dts b/dts/src/arm/bcm2711-rpi-400.dts
index c53d9eb0b8..1ab8184302 100644
--- a/dts/src/arm/bcm2711-rpi-400.dts
+++ b/dts/src/arm/bcm2711-rpi-400.dts
@@ -11,14 +11,6 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	leds {
-		/delete-node/ led-act;
-
-		led-pwr {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
 	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
@@ -40,6 +32,14 @@
 	clock-frequency = <1950000>;
 };
 
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	/delete-node/ led_act;
+};
+
 &pm {
 	/delete-property/ system-power-controller;
 };
diff --git a/dts/src/arm/bcm2711-rpi-cm4-io.dts b/dts/src/arm/bcm2711-rpi-cm4-io.dts
index 19600b629b..d7ba02f586 100644
--- a/dts/src/arm/bcm2711-rpi-cm4-io.dts
+++ b/dts/src/arm/bcm2711-rpi-cm4-io.dts
@@ -1,23 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 #include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	model = "Raspberry Pi Compute Module 4 IO Board";
-
-	leds {
-		led-act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &ddc0 {
@@ -113,6 +101,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pixelvalve0 {
 	status = "okay";
 };
diff --git a/dts/src/arm/bcm2711-rpi-cm4.dtsi b/dts/src/arm/bcm2711-rpi-cm4.dtsi
index a2954d466a..48e63ab784 100644
--- a/dts/src/arm/bcm2711-rpi-cm4.dtsi
+++ b/dts/src/arm/bcm2711-rpi-cm4.dtsi
@@ -12,7 +12,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	sd_io_1v8_reg: sd_io_1v8_reg {
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
 		regulator-min-microvolt = <1800000>;
@@ -26,7 +26,7 @@
 		status = "okay";
 	};
 
-	sd_vcc_reg: sd_vcc_reg {
+	sd_vcc_reg: regulator-sd-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/src/arm/bcm2711.dtsi b/dts/src/arm/bcm2711.dtsi
index 941c4d1679..097e9f2522 100644
--- a/dts/src/arm/bcm2711.dtsi
+++ b/dts/src/arm/bcm2711.dtsi
@@ -48,7 +48,7 @@
 		 * This node is the provider for the enable-method for
 		 * bringing up secondary cores.
 		 */
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 		};
@@ -536,6 +536,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
@@ -647,21 +648,21 @@
 
 	gpio-ranges = <&gpio 0 0 58>;
 
-	gpclk0_gpio49: gpclk0_gpio49 {
+	gpclk0_gpio49: gpclk0-gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk1_gpio50: gpclk1_gpio50 {
+	gpclk1_gpio50: gpclk1-gpio50 {
 		pin-gpclk {
 			pins = "gpio50";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk2_gpio51: gpclk2_gpio51 {
+	gpclk2_gpio51: gpclk2-gpio51 {
 		pin-gpclk {
 			pins = "gpio51";
 			function = "alt1";
@@ -669,7 +670,7 @@
 		};
 	};
 
-	i2c0_gpio46: i2c0_gpio46 {
+	i2c0_gpio46: i2c0-gpio46 {
 		pin-sda {
 			function = "alt0";
 			pins = "gpio46";
@@ -681,7 +682,7 @@
 			bias-disable;
 		};
 	};
-	i2c1_gpio46: i2c1_gpio46 {
+	i2c1_gpio46: i2c1-gpio46 {
 		pin-sda {
 			function = "alt1";
 			pins = "gpio46";
@@ -693,7 +694,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio2: i2c3_gpio2 {
+	i2c3_gpio2: i2c3-gpio2 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio2";
@@ -705,7 +706,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio4: i2c3_gpio4 {
+	i2c3_gpio4: i2c3-gpio4 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio4";
@@ -717,7 +718,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio6: i2c4_gpio6 {
+	i2c4_gpio6: i2c4-gpio6 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio6";
@@ -729,7 +730,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio8: i2c4_gpio8 {
+	i2c4_gpio8: i2c4-gpio8 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio8";
@@ -741,7 +742,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio10: i2c5_gpio10 {
+	i2c5_gpio10: i2c5-gpio10 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio10";
@@ -753,7 +754,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio12: i2c5_gpio12 {
+	i2c5_gpio12: i2c5-gpio12 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio12";
@@ -765,7 +766,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio0: i2c6_gpio0 {
+	i2c6_gpio0: i2c6-gpio0 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio0";
@@ -777,7 +778,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio22: i2c6_gpio22 {
+	i2c6_gpio22: i2c6-gpio22 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio22";
@@ -789,7 +790,7 @@
 			bias-disable;
 		};
 	};
-	i2c_slave_gpio8: i2c_slave_gpio8 {
+	i2c_slave_gpio8: i2c-slave-gpio8 {
 		pins-i2c-slave {
 			pins = "gpio8",
 			       "gpio9",
@@ -799,7 +800,7 @@
 		};
 	};
 
-	jtag_gpio48: jtag_gpio48 {
+	jtag_gpio48: jtag-gpio48 {
 		pins-jtag {
 			pins = "gpio48",
 			       "gpio49",
@@ -811,7 +812,7 @@
 		};
 	};
 
-	mii_gpio28: mii_gpio28 {
+	mii_gpio28: mii-gpio28 {
 		pins-mii {
 			pins = "gpio28",
 			       "gpio29",
@@ -820,7 +821,7 @@
 			function = "alt4";
 		};
 	};
-	mii_gpio36: mii_gpio36 {
+	mii_gpio36: mii-gpio36 {
 		pins-mii {
 			pins = "gpio36",
 			       "gpio37",
@@ -830,7 +831,7 @@
 		};
 	};
 
-	pcm_gpio50: pcm_gpio50 {
+	pcm_gpio50: pcm-gpio50 {
 		pins-pcm {
 			pins = "gpio50",
 			       "gpio51",
@@ -840,63 +841,63 @@
 		};
 	};
 
-	pwm0_0_gpio12: pwm0_0_gpio12 {
+	pwm0_0_gpio12: pwm0-0-gpio12 {
 		pin-pwm {
 			pins = "gpio12";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio18: pwm0_0_gpio18 {
+	pwm0_0_gpio18: pwm0-0-gpio18 {
 		pin-pwm {
 			pins = "gpio18";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_0_gpio40: pwm1_0_gpio40 {
+	pwm1_0_gpio40: pwm1-0-gpio40 {
 		pin-pwm {
 			pins = "gpio40";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio13: pwm0_1_gpio13 {
+	pwm0_1_gpio13: pwm0-1-gpio13 {
 		pin-pwm {
 			pins = "gpio13";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio19: pwm0_1_gpio19 {
+	pwm0_1_gpio19: pwm0-1-gpio19 {
 		pin-pwm {
 			pins = "gpio19";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_1_gpio41: pwm1_1_gpio41 {
+	pwm1_1_gpio41: pwm1-1-gpio41 {
 		pin-pwm {
 			pins = "gpio41";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio45: pwm0_1_gpio45 {
+	pwm0_1_gpio45: pwm0-1-gpio45 {
 		pin-pwm {
 			pins = "gpio45";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio52: pwm0_0_gpio52 {
+	pwm0_0_gpio52: pwm0-0-gpio52 {
 		pin-pwm {
 			pins = "gpio52";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio53: pwm0_1_gpio53 {
+	pwm0_1_gpio53: pwm0-1-gpio53 {
 		pin-pwm {
 			pins = "gpio53";
 			function = "alt1";
@@ -904,7 +905,7 @@
 		};
 	};
 
-	rgmii_gpio35: rgmii_gpio35 {
+	rgmii_gpio35: rgmii-gpio35 {
 		pin-start-stop {
 			pins = "gpio35";
 			function = "alt4";
@@ -914,26 +915,26 @@
 			function = "alt4";
 		};
 	};
-	rgmii_irq_gpio34: rgmii_irq_gpio34 {
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
 		pin-irq {
 			pins = "gpio34";
 			function = "alt5";
 		};
 	};
-	rgmii_irq_gpio39: rgmii_irq_gpio39 {
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
 		pin-irq {
 			pins = "gpio39";
 			function = "alt4";
 		};
 	};
-	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
 		pins-mdio {
 			pins = "gpio28",
 			       "gpio29";
 			function = "alt5";
 		};
 	};
-	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
 		pins-mdio {
 			pins = "gpio37",
 			       "gpio38";
@@ -941,7 +942,7 @@
 		};
 	};
 
-	spi0_gpio46: spi0_gpio46 {
+	spi0_gpio46: spi0-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -950,7 +951,7 @@
 			function = "alt2";
 		};
 	};
-	spi2_gpio46: spi2_gpio46 {
+	spi2_gpio46: spi2-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -960,7 +961,7 @@
 			function = "alt5";
 		};
 	};
-	spi3_gpio0: spi3_gpio0 {
+	spi3_gpio0: spi3-gpio0 {
 		pins-spi {
 			pins = "gpio0",
 			       "gpio1",
@@ -969,7 +970,7 @@
 			function = "alt3";
 		};
 	};
-	spi4_gpio4: spi4_gpio4 {
+	spi4_gpio4: spi4-gpio4 {
 		pins-spi {
 			pins = "gpio4",
 			       "gpio5",
@@ -978,7 +979,7 @@
 			function = "alt3";
 		};
 	};
-	spi5_gpio12: spi5_gpio12 {
+	spi5_gpio12: spi5-gpio12 {
 		pins-spi {
 			pins = "gpio12",
 			       "gpio13",
@@ -987,7 +988,7 @@
 			function = "alt3";
 		};
 	};
-	spi6_gpio18: spi6_gpio18 {
+	spi6_gpio18: spi6-gpio18 {
 		pins-spi {
 			pins = "gpio18",
 			       "gpio19",
@@ -997,7 +998,7 @@
 		};
 	};
 
-	uart2_gpio0: uart2_gpio0 {
+	uart2_gpio0: uart2-gpio0 {
 		pin-tx {
 			pins = "gpio0";
 			function = "alt4";
@@ -1009,7 +1010,7 @@
 			bias-pull-up;
 		};
 	};
-	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
 		pin-cts {
 			pins = "gpio2";
 			function = "alt4";
@@ -1021,7 +1022,7 @@
 			bias-disable;
 		};
 	};
-	uart3_gpio4: uart3_gpio4 {
+	uart3_gpio4: uart3-gpio4 {
 		pin-tx {
 			pins = "gpio4";
 			function = "alt4";
@@ -1033,7 +1034,7 @@
 			bias-pull-up;
 		};
 	};
-	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
 		pin-cts {
 			pins = "gpio6";
 			function = "alt4";
@@ -1045,7 +1046,7 @@
 			bias-disable;
 		};
 	};
-	uart4_gpio8: uart4_gpio8 {
+	uart4_gpio8: uart4-gpio8 {
 		pin-tx {
 			pins = "gpio8";
 			function = "alt4";
@@ -1057,7 +1058,7 @@
 			bias-pull-up;
 		};
 	};
-	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
 		pin-cts {
 			pins = "gpio10";
 			function = "alt4";
@@ -1069,7 +1070,7 @@
 			bias-disable;
 		};
 	};
-	uart5_gpio12: uart5_gpio12 {
+	uart5_gpio12: uart5-gpio12 {
 		pin-tx {
 			pins = "gpio12";
 			function = "alt4";
@@ -1081,7 +1082,7 @@
 			bias-pull-up;
 		};
 	};
-	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
 		pin-cts {
 			pins = "gpio14";
 			function = "alt4";
diff --git a/dts/src/arm/bcm2835-common.dtsi b/dts/src/arm/bcm2835-common.dtsi
index a037d2bc5b..bb7e8f7fac 100644
--- a/dts/src/arm/bcm2835-common.dtsi
+++ b/dts/src/arm/bcm2835-common.dtsi
@@ -152,41 +152,41 @@
 };
 
 &gpio {
-	i2c_slave_gpio18: i2c_slave_gpio18 {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
 		brcm,pins = <18 19 20 21>;
 		brcm,function = <BCM2835_FSEL_ALT3>;
 	};
 
-	jtag_gpio4: jtag_gpio4 {
+	jtag_gpio4: jtag-gpio4 {
 		brcm,pins = <4 5 6 12 13>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
 
-	pwm0_gpio12: pwm0_gpio12 {
+	pwm0_gpio12: pwm0-gpio12 {
 		brcm,pins = <12>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm0_gpio18: pwm0_gpio18 {
+	pwm0_gpio18: pwm0-gpio18 {
 		brcm,pins = <18>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm0_gpio40: pwm0_gpio40 {
+	pwm0_gpio40: pwm0-gpio40 {
 		brcm,pins = <40>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio13: pwm1_gpio13 {
+	pwm1_gpio13: pwm1-gpio13 {
 		brcm,pins = <13>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio19: pwm1_gpio19 {
+	pwm1_gpio19: pwm1-gpio19 {
 		brcm,pins = <19>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm1_gpio41: pwm1_gpio41 {
+	pwm1_gpio41: pwm1-gpio41 {
 		brcm,pins = <41>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio45: pwm1_gpio45 {
+	pwm1_gpio45: pwm1-gpio45 {
 		brcm,pins = <45>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
diff --git a/dts/src/arm/bcm2835-rpi-a-plus.dts b/dts/src/arm/bcm2835-rpi-a-plus.dts
index 9b9a18bbb2..02ce817868 100644
--- a/dts/src/arm/bcm2835-rpi-a-plus.dts
+++ b/dts/src/arm/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -107,6 +96,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/dts/src/arm/bcm2835-rpi-a.dts b/dts/src/arm/bcm2835-rpi-a.dts
index f664e4fced..3fdf60eb11 100644
--- a/dts/src/arm/bcm2835-rpi-a.dts
+++ b/dts/src/arm/bcm2835-rpi-a.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,12 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -102,6 +98,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/dts/src/arm/bcm2835-rpi-b-plus.dts b/dts/src/arm/bcm2835-rpi-b-plus.dts
index 248feb2ed2..9956fd06a4 100644
--- a/dts/src/arm/bcm2835-rpi-b-plus.dts
+++ b/dts/src/arm/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -109,6 +98,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/dts/src/arm/bcm2835-rpi-b-rev2.dts b/dts/src/arm/bcm2835-rpi-b-rev2.dts
index f5b66d3f4f..4e1770afb1 100644
--- a/dts/src/arm/bcm2835-rpi-b-rev2.dts
+++ b/dts/src/arm/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -102,6 +98,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/dts/src/arm/bcm2835-rpi-b.dts b/dts/src/arm/bcm2835-rpi-b.dts
index f589bede2b..eec1d0892d 100644
--- a/dts/src/arm/bcm2835-rpi-b.dts
+++ b/dts/src/arm/bcm2835-rpi-b.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -96,6 +92,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/dts/src/arm/bcm2835-rpi-cm1.dtsi b/dts/src/arm/bcm2835-rpi-cm1.dtsi
index e4e6b6abbf..750cd76948 100644
--- a/dts/src/arm/bcm2835-rpi-cm1.dtsi
+++ b/dts/src/arm/bcm2835-rpi-cm1.dtsi
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 
 / {
 	leds {
@@ -32,6 +34,10 @@
 	};
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhost {
 	non-removable;
 	vmmc-supply = <&reg_3v3>;
diff --git a/dts/src/arm/bcm2835-rpi-common.dtsi b/dts/src/arm/bcm2835-rpi-common.dtsi
index 8a55b6cded..4e7b4a592d 100644
--- a/dts/src/arm/bcm2835-rpi-common.dtsi
+++ b/dts/src/arm/bcm2835-rpi-common.dtsi
@@ -7,6 +7,23 @@
 
 #include <dt-bindings/power/raspberrypi-power.h>
 
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+};
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
 &v3d {
 	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
 };
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/dts/src/arm/bcm2835-rpi-zero-w.dts b/dts/src/arm/bcm2835-rpi-zero-w.dts
index 596bb1ef99..dbf825985e 100644
--- a/dts/src/arm/bcm2835-rpi-zero-w.dts
+++ b/dts/src/arm/bcm2835-rpi-zero-w.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -22,12 +24,6 @@
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &bt {
@@ -110,6 +106,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 };
diff --git a/dts/src/arm/bcm2835-rpi-zero.dts b/dts/src/arm/bcm2835-rpi-zero.dts
index a65c2bca69..f80e65a825 100644
--- a/dts/src/arm/bcm2835-rpi-zero.dts
+++ b/dts/src/arm/bcm2835-rpi-zero.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 
 / {
@@ -16,12 +18,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &gpio {
@@ -104,6 +100,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
diff --git a/dts/src/arm/bcm2835-rpi.dtsi b/dts/src/arm/bcm2835-rpi.dtsi
index 87ddcad760..ee9ee9d1fe 100644
--- a/dts/src/arm/bcm2835-rpi.dtsi
+++ b/dts/src/arm/bcm2835-rpi.dtsi
@@ -1,16 +1,6 @@
 #include <dt-bindings/power/raspberrypi-power.h>
 
 / {
-	leds {
-		compatible = "gpio-leds";
-
-		led-act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
diff --git a/dts/src/arm/bcm2835.dtsi b/dts/src/arm/bcm2835.dtsi
index 1c90e5a442..15cb331feb 100644
--- a/dts/src/arm/bcm2835.dtsi
+++ b/dts/src/arm/bcm2835.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
diff --git a/dts/src/arm/bcm2836-rpi-2-b.dts b/dts/src/arm/bcm2836-rpi-2-b.dts
index 3635502b1e..6068ec3900 100644
--- a/dts/src/arm/bcm2836-rpi-2-b.dts
+++ b/dts/src/arm/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -109,6 +97,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/dts/src/arm/bcm2836-rpi.dtsi b/dts/src/arm/bcm2836-rpi.dtsi
index c4c858b984..48b03b55ff 100644
--- a/dts/src/arm/bcm2836-rpi.dtsi
+++ b/dts/src/arm/bcm2836-rpi.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 &vchiq {
 	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
diff --git a/dts/src/arm/bcm2836.dtsi b/dts/src/arm/bcm2836.dtsi
index 534dacfc4d..783fe624ba 100644
--- a/dts/src/arm/bcm2836.dtsi
+++ b/dts/src/arm/bcm2836.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
@@ -11,7 +10,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
@@ -113,6 +112,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
diff --git a/dts/src/arm/bcm2837-rpi-3-a-plus.dts b/dts/src/arm/bcm2837-rpi-3-a-plus.dts
index f7222a2890..3548306dfb 100644
--- a/dts/src/arm/bcm2837-rpi-3-a-plus.dts
+++ b/dts/src/arm/bcm2837-rpi-3-a-plus.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -18,19 +19,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &firmware {
@@ -124,6 +112,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
diff --git a/dts/src/arm/bcm2837-rpi-3-b-plus.dts b/dts/src/arm/bcm2837-rpi-3-b-plus.dts
index ec721d323a..2f1800cbc5 100644
--- a/dts/src/arm/bcm2837-rpi-3-b-plus.dts
+++ b/dts/src/arm/bcm2837-rpi-3-b-plus.dts
@@ -3,6 +3,7 @@
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
 #include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -19,19 +20,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &bt {
@@ -130,6 +118,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
diff --git a/dts/src/arm/bcm2837-rpi-3-b.dts b/dts/src/arm/bcm2837-rpi-3-b.dts
index fb6a417d73..6127034007 100644
--- a/dts/src/arm/bcm2837-rpi-3-b.dts
+++ b/dts/src/arm/bcm2837-rpi-3-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
@@ -19,12 +20,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &bt {
@@ -129,6 +124,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
diff --git a/dts/src/arm/bcm2837-rpi-cm3.dtsi b/dts/src/arm/bcm2837-rpi-cm3.dtsi
index f57b4ca145..1e4e4946b6 100644
--- a/dts/src/arm/bcm2837-rpi-cm3.dtsi
+++ b/dts/src/arm/bcm2837-rpi-cm3.dtsi
@@ -9,14 +9,6 @@
 		reg = <0 0x40000000>;
 	};
 
-	leds {
-		/*
-		 * Since there is no upstream GPIO driver yet,
-		 * remove the incomplete node.
-		 */
-		/delete-node/ led-act;
-	};
-
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
diff --git a/dts/src/arm/bcm2837-rpi-zero-2-w.dts b/dts/src/arm/bcm2837-rpi-zero-2-w.dts
index 4a76856298..b9cc459439 100644
--- a/dts/src/arm/bcm2837-rpi-zero-2-w.dts
+++ b/dts/src/arm/bcm2837-rpi-zero-2-w.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -22,12 +23,6 @@
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &bt {
@@ -109,6 +104,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 };
diff --git a/dts/src/arm/bcm2837.dtsi b/dts/src/arm/bcm2837.dtsi
index 5dbdebc462..84c08b4651 100644
--- a/dts/src/arm/bcm2837.dtsi
+++ b/dts/src/arm/bcm2837.dtsi
@@ -1,6 +1,5 @@
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";
@@ -115,6 +114,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
diff --git a/dts/src/arm/bcm283x-rpi-led-deprecated.dtsi b/dts/src/arm/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 0000000000..f83e56de1a
--- /dev/null
+++ b/dts/src/arm/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi
index d2d9c6e67f..c9c52a19ef 100644
--- a/dts/src/arm/bcm283x.dtsi
+++ b/dts/src/arm/bcm283x.dtsi
@@ -135,17 +135,17 @@
 			 * groups only make sense to switch to a
 			 * particular function together.
 			 */
-			dpi_gpio0: dpi_gpio0 {
+			dpi_gpio0: dpi-gpio0 {
 				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
 					     12 13 14 15 16 17 18 19
 					     20 21 22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			emmc_gpio22: emmc_gpio22 {
+			emmc_gpio22: emmc-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			emmc_gpio34: emmc_gpio34 {
+			emmc_gpio34: emmc-gpio34 {
 				brcm,pins = <34 35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF
@@ -155,95 +155,95 @@
 					     BCM2835_PUD_UP
 					     BCM2835_PUD_UP>;
 			};
-			emmc_gpio48: emmc_gpio48 {
+			emmc_gpio48: emmc-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
 
-			gpclk0_gpio4: gpclk0_gpio4 {
+			gpclk0_gpio4: gpclk0-gpio4 {
 				brcm,pins = <4>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio5: gpclk1_gpio5 {
+			gpclk1_gpio5: gpclk1-gpio5 {
 				brcm,pins = <5>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio42: gpclk1_gpio42 {
+			gpclk1_gpio42: gpclk1-gpio42 {
 				brcm,pins = <42>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio44: gpclk1_gpio44 {
+			gpclk1_gpio44: gpclk1-gpio44 {
 				brcm,pins = <44>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio6: gpclk2_gpio6 {
+			gpclk2_gpio6: gpclk2-gpio6 {
 				brcm,pins = <6>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio43: gpclk2_gpio43 {
+			gpclk2_gpio43: gpclk2-gpio43 {
 				brcm,pins = <43>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 				brcm,pull = <BCM2835_PUD_OFF>;
 			};
 
-			i2c0_gpio0: i2c0_gpio0 {
+			i2c0_gpio0: i2c0-gpio0 {
 				brcm,pins = <0 1>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio28: i2c0_gpio28 {
+			i2c0_gpio28: i2c0-gpio28 {
 				brcm,pins = <28 29>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio44: i2c0_gpio44 {
+			i2c0_gpio44: i2c0-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT1>;
 			};
-			i2c1_gpio2: i2c1_gpio2 {
+			i2c1_gpio2: i2c1-gpio2 {
 				brcm,pins = <2 3>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c1_gpio44: i2c1_gpio44 {
+			i2c1_gpio44: i2c1-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			jtag_gpio22: jtag_gpio22 {
+			jtag_gpio22: jtag-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			pcm_gpio18: pcm_gpio18 {
+			pcm_gpio18: pcm-gpio18 {
 				brcm,pins = <18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			pcm_gpio28: pcm_gpio28 {
+			pcm_gpio28: pcm-gpio28 {
 				brcm,pins = <28 29 30 31>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			sdhost_gpio48: sdhost_gpio48 {
+			sdhost_gpio48: sdhost-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
 
-			spi0_gpio7: spi0_gpio7 {
+			spi0_gpio7: spi0-gpio7 {
 				brcm,pins = <7 8 9 10 11>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi0_gpio35: spi0_gpio35 {
+			spi0_gpio35: spi0-gpio35 {
 				brcm,pins = <35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi1_gpio16: spi1_gpio16 {
+			spi1_gpio16: spi1-gpio16 {
 				brcm,pins = <16 17 18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
-			spi2_gpio40: spi2_gpio40 {
+			spi2_gpio40: spi2-gpio40 {
 				brcm,pins = <40 41 42 43 44 45>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			uart0_gpio14: uart0_gpio14 {
+			uart0_gpio14: uart0-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
@@ -252,50 +252,50 @@
 			 * people often run uart0 on the two pins
 			 * without flow control.
 			 */
-			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
 			};
-			uart0_gpio32: uart0_gpio32 {
+			uart0_gpio32: uart0-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
 			};
-			uart0_gpio36: uart0_gpio36 {
+			uart0_gpio36: uart0-gpio36 {
 				brcm,pins = <36 37>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
 				brcm,pins = <38 39>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			uart1_gpio14: uart1_gpio14 {
+			uart1_gpio14: uart1-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio32: uart1_gpio32 {
+			uart1_gpio32: uart1-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio40: uart1_gpio40 {
+			uart1_gpio40: uart1-gpio40 {
 				brcm,pins = <40 41>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
 				brcm,pins = <42 43>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
diff --git a/dts/src/arm/bcm4708-asus-rt-ac56u.dts b/dts/src/arm/bcm4708-asus-rt-ac56u.dts
index 09ee3e46c0..c80ac16ad9 100644
--- a/dts/src/arm/bcm4708-asus-rt-ac56u.dts
+++ b/dts/src/arm/bcm4708-asus-rt-ac56u.dts
@@ -28,40 +28,39 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		all {
+		led-all {
 			label = "bcm53xx:blue:all";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm4708-asus-rt-ac68u.dts b/dts/src/arm/bcm4708-asus-rt-ac68u.dts
index 32619c6045..3fe17bd7b8 100644
--- a/dts/src/arm/bcm4708-asus-rt-ac68u.dts
+++ b/dts/src/arm/bcm4708-asus-rt-ac68u.dts
@@ -28,24 +28,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi
index a658b9b7bc..e583b9cbf0 100644
--- a/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -37,7 +37,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			/* label = "bcm53xx:blue:usb"; */
 			function = LED_FUNCTION_USB;
 			color = <LED_COLOR_ID_BLUE>;
@@ -48,14 +48,14 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			/* label = "bcm53xx:red:power"; */
 			function = LED_FUNCTION_FAULT;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			/* label = "bcm53xx:white:power"; */
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_WHITE>;
@@ -63,7 +63,7 @@
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			/*  label = "bcm53xx:blue:router"; */
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
@@ -71,14 +71,14 @@
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			/* label = "bcm53xx:amber:router"; */
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			/* label = "bcm53xx:blue:wan"; */
 			function = LED_FUNCTION_WAN;
 			color = <LED_COLOR_ID_BLUE>;
@@ -86,14 +86,14 @@
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			/* label = "bcm53xx:blue:wireless"; */
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			/* label = "bcm53xx:amber:wireless"; */
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_AMBER>;
diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
index f8f53457dd..43c698a0a7 100644
--- a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
@@ -49,7 +49,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -58,40 +58,40 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/bcm4708-luxul-xap-1510.dts b/dts/src/arm/bcm4708-luxul-xap-1510.dts
index 14ee410183..6de7fe204b 100644
--- a/dts/src/arm/bcm4708-luxul-xap-1510.dts
+++ b/dts/src/arm/bcm4708-luxul-xap-1510.dts
@@ -23,19 +23,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/dts/src/arm/bcm4708-luxul-xwc-1000.dts b/dts/src/arm/bcm4708-luxul-xwc-1000.dts
index 600ab087f5..f5b75ba935 100644
--- a/dts/src/arm/bcm4708-luxul-xwc-1000.dts
+++ b/dts/src/arm/bcm4708-luxul-xwc-1000.dts
@@ -42,7 +42,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
diff --git a/dts/src/arm/bcm4708-netgear-r6250.dts b/dts/src/arm/bcm4708-netgear-r6250.dts
index fd6d8d2a44..89155caf50 100644
--- a/dts/src/arm/bcm4708-netgear-r6250.dts
+++ b/dts/src/arm/bcm4708-netgear-r6250.dts
@@ -29,24 +29,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -54,7 +54,7 @@
 			linux,default-trigger = "usbport";
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm4708-netgear-r6300-v2.dts b/dts/src/arm/bcm4708-netgear-r6300-v2.dts
index 76fc1099d4..57d00a0b47 100644
--- a/dts/src/arm/bcm4708-netgear-r6300-v2.dts
+++ b/dts/src/arm/bcm4708-netgear-r6300-v2.dts
@@ -28,29 +28,29 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm4708-smartrg-sr400ac.dts b/dts/src/arm/bcm4708-smartrg-sr400ac.dts
index 6bcdfb73cb..26cdeb5cc3 100644
--- a/dts/src/arm/bcm4708-smartrg-sr400ac.dts
+++ b/dts/src/arm/bcm4708-smartrg-sr400ac.dts
@@ -28,64 +28,64 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-green {
+		led-usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-red {
+		led-status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-green {
+		led-status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-blue {
+		led-status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/bcm47081-asus-rt-n18u.dts b/dts/src/arm/bcm47081-asus-rt-n18u.dts
index ca47cc4f2b..3854db0118 100644
--- a/dts/src/arm/bcm47081-asus-rt-n18u.dts
+++ b/dts/src/arm/bcm47081-asus-rt-n18u.dts
@@ -28,30 +28,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts
index 0edc2543e5..407319cb5c 100644
--- a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts
@@ -49,40 +49,40 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts
index 1f0998f34a..f8622ecce6 100644
--- a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts
+++ b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts
@@ -49,45 +49,45 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/bcm47081-luxul-xap-1410.dts b/dts/src/arm/bcm47081-luxul-xap-1410.dts
index c8c0237754..76c9b30b86 100644
--- a/dts/src/arm/bcm47081-luxul-xap-1410.dts
+++ b/dts/src/arm/bcm47081-luxul-xap-1410.dts
@@ -23,19 +23,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/dts/src/arm/bcm47081-luxul-xwr-1200.dts b/dts/src/arm/bcm47081-luxul-xwr-1200.dts
index 3b35a7af4b..6ef0c0788e 100644
--- a/dts/src/arm/bcm47081-luxul-xwr-1200.dts
+++ b/dts/src/arm/bcm47081-luxul-xwr-1200.dts
@@ -29,62 +29,62 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3 {
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan4 {
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan2 {
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan1 {
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
diff --git a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts
index 19a7971b5a..b6a5886698 100644
--- a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts
+++ b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts
@@ -23,50 +23,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:green:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port1 {
+		led-usb2-port1 {
 			label = "bcm53xx:green:usb2-port1";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-green {
+		led-wan-green {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:green:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port2 {
+		led-usb2-port2 {
 			label = "bcm53xx:green:usb2-port2";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
@@ -95,30 +95,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/dts/src/arm/bcm4709-asus-rt-ac87u.dts b/dts/src/arm/bcm4709-asus-rt-ac87u.dts
index f52a75c4ca..4f44cb4df7 100644
--- a/dts/src/arm/bcm4709-asus-rt-ac87u.dts
+++ b/dts/src/arm/bcm4709-asus-rt-ac87u.dts
@@ -28,18 +28,18 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts b/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts
index 5ff6c588e1..b7cd2faa30 100644
--- a/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts
@@ -28,48 +28,48 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/bcm4709-netgear-r7000.dts b/dts/src/arm/bcm4709-netgear-r7000.dts
index de961fbb62..24ba8f8f9b 100644
--- a/dts/src/arm/bcm4709-netgear-r7000.dts
+++ b/dts/src/arm/bcm4709-netgear-r7000.dts
@@ -28,43 +28,43 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm4709-netgear-r8000.dts b/dts/src/arm/bcm4709-netgear-r8000.dts
index 087f7f60de..14303ab521 100644
--- a/dts/src/arm/bcm4709-netgear-r8000.dts
+++ b/dts/src/arm/bcm4709-netgear-r8000.dts
@@ -39,59 +39,59 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts
index 11d1068160..5a8b2b1567 100644
--- a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts
+++ b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts
@@ -23,27 +23,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -51,24 +51,24 @@
 			linux,default-trigger = "usbport";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		wan-blue {
+		led-wan-blue {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
@@ -104,30 +104,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/dts/src/arm/bcm47094-asus-rt-ac88u.dts b/dts/src/arm/bcm47094-asus-rt-ac88u.dts
index a5fec56d11..a50ff686b5 100644
--- a/dts/src/arm/bcm47094-asus-rt-ac88u.dts
+++ b/dts/src/arm/bcm47094-asus-rt-ac88u.dts
@@ -33,37 +33,37 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "white:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "white:lan";
 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "white:usb2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ehci_port1>, <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "white:wps";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm47094-dlink-dir-885l.dts b/dts/src/arm/bcm47094-dlink-dir-885l.dts
index 2c38b642a8..555fbe41dd 100644
--- a/dts/src/arm/bcm47094-dlink-dir-885l.dts
+++ b/dts/src/arm/bcm47094-dlink-dir-885l.dts
@@ -43,28 +43,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,12 +72,12 @@
 			linux,default-trigger = "usbport";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm47094-dlink-dir-890l.dts b/dts/src/arm/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 0000000000..d945a20b06
--- /dev/null
+++ b/dts/src/arm/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/bcm47094-linksys-panamera.dts b/dts/src/arm/bcm47094-linksys-panamera.dts
index 86c7cc0fa7..d9a16a820e 100644
--- a/dts/src/arm/bcm47094-linksys-panamera.dts
+++ b/dts/src/arm/bcm47094-linksys-panamera.dts
@@ -52,19 +52,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:green:usb2";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,58 +72,58 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wifi-disabled {
+		led-wifi-disabled {
 			label = "bcm53xx:amber:wifi-disabled";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi-enabled {
+		led-wifi-enabled {
 			label = "bcm53xx:white:wifi-enabled";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar1 {
+		led-bluebar1 {
 			label = "bcm53xx:white:bluebar1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar2 {
+		led-bluebar2 {
 			label = "bcm53xx:white:bluebar2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar3 {
+		led-bluebar3 {
 			label = "bcm53xx:white:bluebar3";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		bluebar4 {
+		led-bluebar4 {
 			label = "bcm53xx:white:bluebar4";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar5 {
+		led-bluebar5 {
 			label = "bcm53xx:white:bluebar5";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar6 {
+		led-bluebar6 {
 			label = "bcm53xx:white:bluebar6";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar7 {
+		led-bluebar7 {
 			label = "bcm53xx:white:bluebar7";
 			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar8 {
+		led-bluebar8 {
 			label = "bcm53xx:white:bluebar8";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/bcm47094-luxul-abr-4500.dts b/dts/src/arm/bcm47094-luxul-abr-4500.dts
index 9ad15bcae1..41a0722fa6 100644
--- a/dts/src/arm/bcm47094-luxul-abr-4500.dts
+++ b/dts/src/arm/bcm47094-luxul-abr-4500.dts
@@ -30,13 +30,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
diff --git a/dts/src/arm/bcm47094-luxul-xap-1610.dts b/dts/src/arm/bcm47094-luxul-xap-1610.dts
index ee24d37685..c56c7e3668 100644
--- a/dts/src/arm/bcm47094-luxul-xap-1610.dts
+++ b/dts/src/arm/bcm47094-luxul-xap-1610.dts
@@ -23,18 +23,18 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm47094-luxul-xbr-4500.dts b/dts/src/arm/bcm47094-luxul-xbr-4500.dts
index 6549d07b98..1b5c91a524 100644
--- a/dts/src/arm/bcm47094-luxul-xbr-4500.dts
+++ b/dts/src/arm/bcm47094-luxul-xbr-4500.dts
@@ -30,13 +30,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
diff --git a/dts/src/arm/bcm47094-luxul-xwc-2000.dts b/dts/src/arm/bcm47094-luxul-xwc-2000.dts
index 654fcce9fd..739063b77b 100644
--- a/dts/src/arm/bcm47094-luxul-xwc-2000.dts
+++ b/dts/src/arm/bcm47094-luxul-xwc-2000.dts
@@ -25,7 +25,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/dts/src/arm/bcm47094-luxul-xwr-3100.dts b/dts/src/arm/bcm47094-luxul-xwr-3100.dts
index bf053a2fcc..7afc68d5d2 100644
--- a/dts/src/arm/bcm47094-luxul-xwr-3100.dts
+++ b/dts/src/arm/bcm47094-luxul-xwr-3100.dts
@@ -30,38 +30,38 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3	{
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan4	{
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan	{
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		lan1	{
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		lan2	{
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -69,18 +69,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts
index 78a90dd57a..60a2c441d5 100644
--- a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts
+++ b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts
@@ -33,13 +33,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -47,18 +47,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm47094-netgear-r8500.dts b/dts/src/arm/bcm47094-netgear-r8500.dts
index f850dce37b..76d5626106 100644
--- a/dts/src/arm/bcm47094-netgear-r8500.dts
+++ b/dts/src/arm/bcm47094-netgear-r8500.dts
@@ -25,38 +25,38 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/src/arm/bcm47189-luxul-xap-1440.dts b/dts/src/arm/bcm47189-luxul-xap-1440.dts
index e20b6d2eb2..0734aa249b 100644
--- a/dts/src/arm/bcm47189-luxul-xap-1440.dts
+++ b/dts/src/arm/bcm47189-luxul-xap-1440.dts
@@ -23,13 +23,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wlan {
+		led-wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/dts/src/arm/bcm47189-luxul-xap-810.dts b/dts/src/arm/bcm47189-luxul-xap-810.dts
index 9d863570fc..e6fb6cbe69 100644
--- a/dts/src/arm/bcm47189-luxul-xap-810.dts
+++ b/dts/src/arm/bcm47189-luxul-xap-810.dts
@@ -20,26 +20,26 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
diff --git a/dts/src/arm/bcm47189-tenda-ac9.dts b/dts/src/arm/bcm47189-tenda-ac9.dts
index 55b92645b0..dab2e5f63a 100644
--- a/dts/src/arm/bcm47189-tenda-ac9.dts
+++ b/dts/src/arm/bcm47189-tenda-ac9.dts
@@ -20,37 +20,37 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:blue:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/bcm47622.dtsi b/dts/src/arm/bcm47622.dtsi
index 2df04528af..f4b2db9bc4 100644
--- a/dts/src/arm/bcm47622.dtsi
+++ b/dts/src/arm/bcm47622.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm/bcm53016-dlink-dwl-8610ap.dts b/dts/src/arm/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 0000000000..c1f5439174
--- /dev/null
+++ b/dts/src/arm/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/dts/src/arm/bcm53016-meraki-mr32.dts b/dts/src/arm/bcm53016-meraki-mr32.dts
index e678bc03d8..46c2c93b01 100644
--- a/dts/src/arm/bcm53016-meraki-mr32.dts
+++ b/dts/src/arm/bcm53016-meraki-mr32.dts
@@ -58,7 +58,7 @@
 	pwm-leds {
 		compatible = "pwm-leds";
 
-		red {
+		led-0 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
@@ -66,7 +66,7 @@
 			max-brightness = <255>;
 		};
 
-		green {
+		led-1 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -74,7 +74,7 @@
 			max-brightness = <255>;
 		};
 
-		blue {
+		led-2 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
diff --git a/dts/src/arm/bcm63148.dtsi b/dts/src/arm/bcm63148.dtsi
index df5307b6b3..7cd55d64de 100644
--- a/dts/src/arm/bcm63148.dtsi
+++ b/dts/src/arm/bcm63148.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm/bcm63178.dtsi b/dts/src/arm/bcm63178.dtsi
index cbd094dde6..043e699cbc 100644
--- a/dts/src/arm/bcm63178.dtsi
+++ b/dts/src/arm/bcm63178.dtsi
@@ -43,6 +43,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm/bcm6756.dtsi b/dts/src/arm/bcm6756.dtsi
index ce1b59faf8..5c72219bc1 100644
--- a/dts/src/arm/bcm6756.dtsi
+++ b/dts/src/arm/bcm6756.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm/bcm6846.dtsi b/dts/src/arm/bcm6846.dtsi
index 8aa47a2583..81513a7938 100644
--- a/dts/src/arm/bcm6846.dtsi
+++ b/dts/src/arm/bcm6846.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm/bcm6855.dtsi b/dts/src/arm/bcm6855.dtsi
index 620f51aee1..5fa5feac0e 100644
--- a/dts/src/arm/bcm6855.dtsi
+++ b/dts/src/arm/bcm6855.dtsi
@@ -43,6 +43,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm/bcm6878.dtsi b/dts/src/arm/bcm6878.dtsi
index 1e8b5fa96c..4ec836ac4b 100644
--- a/dts/src/arm/bcm6878.dtsi
+++ b/dts/src/arm/bcm6878.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm/bcm947189acdbmr.dts b/dts/src/arm/bcm947189acdbmr.dts
index 16e70a264f..3709baa237 100644
--- a/dts/src/arm/bcm947189acdbmr.dts
+++ b/dts/src/arm/bcm947189acdbmr.dts
@@ -25,17 +25,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm/dove.dtsi b/dts/src/arm/dove.dtsi
index 00a36fba2f..9aee3cfd3e 100644
--- a/dts/src/arm/dove.dtsi
+++ b/dts/src/arm/dove.dtsi
@@ -139,7 +139,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git a/dts/src/arm/dra7-evm-common.dtsi b/dts/src/arm/dra7-evm-common.dtsi
index 68c43eb12c..4cdffd6db7 100644
--- a/dts/src/arm/dra7-evm-common.dtsi
+++ b/dts/src/arm/dra7-evm-common.dtsi
@@ -151,7 +151,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/dts/src/arm/dra7-evm.dts b/dts/src/arm/dra7-evm.dts
index 87deb6a76e..8cbcf55a5a 100644
--- a/dts/src/arm/dra7-evm.dts
+++ b/dts/src/arm/dra7-evm.dts
@@ -483,7 +483,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
diff --git a/dts/src/arm/dra72-evm-common.dtsi b/dts/src/arm/dra72-evm-common.dtsi
index 8948e10dbe..c79ba671ec 100644
--- a/dts/src/arm/dra72-evm-common.dtsi
+++ b/dts/src/arm/dra72-evm-common.dtsi
@@ -356,7 +356,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -490,7 +490,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/dts/src/arm/e60k02.dtsi b/dts/src/arm/e60k02.dtsi
index 935e2359f8..94944cc219 100644
--- a/dts/src/arm/e60k02.dtsi
+++ b/dts/src/arm/e60k02.dtsi
@@ -104,7 +104,16 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	/* TODO: CYTTSP5 touch controller at 0x24 */
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
 
diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi
index 326b9e0ed8..a2d6ee7fff 100644
--- a/dts/src/arm/exynos3250.dtsi
+++ b/dts/src/arm/exynos3250.dtsi
@@ -485,7 +485,7 @@
 		};
 
 		mfc: codec@13400000 {
-			compatible = "samsung,mfc-v7";
+			compatible = "samsung,exynos3250-mfc", "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
diff --git a/dts/src/arm/imx6dl-colibri-aster.dts b/dts/src/arm/imx6dl-colibri-aster.dts
index 74e8a6cd8b..a28e083f29 100644
--- a/dts/src/arm/imx6dl-colibri-aster.dts
+++ b/dts/src/arm/imx6dl-colibri-aster.dts
@@ -99,7 +99,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm/imx6dl-colibri-eval-v3.dts b/dts/src/arm/imx6dl-colibri-eval-v3.dts
index 7272edd85a..a02981d4a3 100644
--- a/dts/src/arm/imx6dl-colibri-eval-v3.dts
+++ b/dts/src/arm/imx6dl-colibri-eval-v3.dts
@@ -111,7 +111,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm/imx6dl-colibri-iris.dts b/dts/src/arm/imx6dl-colibri-iris.dts
index cf77d894f6..c5797ff35b 100644
--- a/dts/src/arm/imx6dl-colibri-iris.dts
+++ b/dts/src/arm/imx6dl-colibri-iris.dts
@@ -138,7 +138,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm/imx6qdl-colibri.dtsi b/dts/src/arm/imx6qdl-colibri.dtsi
index 023e762150..d8f985f297 100644
--- a/dts/src/arm/imx6qdl-colibri.dtsi
+++ b/dts/src/arm/imx6qdl-colibri.dtsi
@@ -24,6 +24,13 @@
 		status = "disabled";
 	};
 
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -105,7 +112,7 @@
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -670,9 +677,16 @@
 	status = "disabled";
 };
 
+/* Colibri USBH */
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+};
+
+/* Colibri USBC */
 &usbotg {
 	disable-over-current;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
 	status = "disabled";
 };
 
@@ -986,7 +1000,7 @@
 
 	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
 		fsl,pins = <
-			/* USBH_EN */
+			/* SODIMM 129 / USBH_PEN */
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
 		>;
 	};
@@ -1055,7 +1069,7 @@
 
 	pinctrl_usbc_det: usbcdetgrp {
 		fsl,pins = <
-			/* USBC_DET */
+			/* SODIMM 137 / USBC_DET */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
 			/* USBC_DET_OVERWRITE */
 			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
diff --git a/dts/src/arm/imx6qdl-pico.dtsi b/dts/src/arm/imx6qdl-pico.dtsi
index f7a56d6b16..c39a9ebdab 100644
--- a/dts/src/arm/imx6qdl-pico.dtsi
+++ b/dts/src/arm/imx6qdl-pico.dtsi
@@ -233,7 +233,6 @@
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
 		clock-frequency = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
diff --git a/dts/src/arm/imx6qdl-sabreauto.dtsi b/dts/src/arm/imx6qdl-sabreauto.dtsi
index 3dbb460ef1..eebcfe1214 100644
--- a/dts/src/arm/imx6qdl-sabreauto.dtsi
+++ b/dts/src/arm/imx6qdl-sabreauto.dtsi
@@ -452,8 +452,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_egalax_int>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/dts/src/arm/imx6qdl-sabrelite.dtsi b/dts/src/arm/imx6qdl-sabrelite.dtsi
index 22f8e2783c..12573e1f91 100644
--- a/dts/src/arm/imx6qdl-sabrelite.dtsi
+++ b/dts/src/arm/imx6qdl-sabrelite.dtsi
@@ -14,6 +14,11 @@
 		stdout-path = &uart2;
 	};
 
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
 	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi
index 37482a9023..09f4c2fa3a 100644
--- a/dts/src/arm/imx6qdl-sabresd.dtsi
+++ b/dts/src/arm/imx6qdl-sabresd.dtsi
@@ -311,8 +311,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
 	};
 
 	ov5640: camera@3c {
@@ -450,8 +450,8 @@
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <7 2>;
-		wakeup-gpios = <&gpio6 7 0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
 	};
 
 	magnetometer@e {
diff --git a/dts/src/arm/imx6qdl-wandboard.dtsi b/dts/src/arm/imx6qdl-wandboard.dtsi
index ec6fba5ee8..e4f63423d8 100644
--- a/dts/src/arm/imx6qdl-wandboard.dtsi
+++ b/dts/src/arm/imx6qdl-wandboard.dtsi
@@ -131,7 +131,6 @@
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
 		clock-frequency = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
diff --git a/dts/src/arm/imx6sl-kobo-aura2.dts b/dts/src/arm/imx6sl-kobo-aura2.dts
new file mode 100644
index 0000000000..657d0f1b61
--- /dev/null
+++ b/dts/src/arm/imx6sl-kobo-aura2.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Kobo Aura 2 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QL0+4B1
+ * Serials start with: E60QL2
+ *
+ * Copyright 2022 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Kobo Aura 2";
+	compatible = "kobo,aura2", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-0 {
+			label = "koboaura2:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_WHITE>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		compatible = "ti,lm3630a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+		reg = <0x36>;
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* eKTF2232 at 0x15 */
+	/* FP9928 at 0x48 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-holes */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6sl-tolino-shine2hd.dts b/dts/src/arm/imx6sl-tolino-shine2hd.dts
index 663ee9df79..da13990576 100644
--- a/dts/src/arm/imx6sl-tolino-shine2hd.dts
+++ b/dts/src/arm/imx6sl-tolino-shine2hd.dts
@@ -18,6 +18,21 @@
 	model = "Tolino Shine 2 HD";
 	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	chosen {
 		stdout-path = &uart1;
 	};
@@ -65,6 +80,12 @@
 			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
+
+		led-1 {
+			label = "tolinoshine2hd:white:backlightboost";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
 	};
 
 	memory@80000000 {
@@ -299,6 +320,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
@@ -383,7 +410,8 @@
 
 	pinctrl_led: ledgrp {
 		fsl,pins = <
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
 		>;
 	};
 
diff --git a/dts/src/arm/imx6sl-tolino-shine3.dts b/dts/src/arm/imx6sl-tolino-shine3.dts
index e3f1e8d795..db5d850993 100644
--- a/dts/src/arm/imx6sl-tolino-shine3.dts
+++ b/dts/src/arm/imx6sl-tolino-shine3.dts
@@ -52,6 +52,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
diff --git a/dts/src/arm/imx6sll-kobo-clarahd.dts b/dts/src/arm/imx6sll-kobo-clarahd.dts
index 90b32f5eb5..c7cfe0b70f 100644
--- a/dts/src/arm/imx6sll-kobo-clarahd.dts
+++ b/dts/src/arm/imx6sll-kobo-clarahd.dts
@@ -62,6 +62,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi
index abc3572d69..80f5efd65c 100644
--- a/dts/src/arm/imx6sx.dtsi
+++ b/dts/src/arm/imx6sx.dtsi
@@ -1391,7 +1391,7 @@
 
 			pwm8: pwm@22b0000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0022b0000 0x4000>;
+				reg = <0x022b0000 0x4000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
diff --git a/dts/src/arm/imx6ul-phytec-phycore-som.dtsi b/dts/src/arm/imx6ul-phytec-phycore-som.dtsi
index 3cddc68917..5168ed0ffe 100644
--- a/dts/src/arm/imx6ul-phytec-phycore-som.dtsi
+++ b/dts/src/arm/imx6ul-phytec-phycore-som.dtsi
@@ -102,6 +102,10 @@
 	status = "disabled";
 };
 
+&wdog1 {
+	fsl,suspend-in-wait;
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
diff --git a/dts/src/arm/imx6ull-colibri-aster.dts b/dts/src/arm/imx6ull-colibri-aster.dts
index d3f2fb7c6c..3e0897c3a2 100644
--- a/dts/src/arm/imx6ull-colibri-aster.dts
+++ b/dts/src/arm/imx6ull-colibri-aster.dts
@@ -15,6 +15,46 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/dts/src/arm/imx6ull-colibri-eval-v3.dts b/dts/src/arm/imx6ull-colibri-eval-v3.dts
index 9bf7111d7b..d6da984e51 100644
--- a/dts/src/arm/imx6ull-colibri-eval-v3.dts
+++ b/dts/src/arm/imx6ull-colibri-eval-v3.dts
@@ -12,3 +12,27 @@
 	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/dts/src/arm/imx6ull-colibri-iris-v2.dts b/dts/src/arm/imx6ull-colibri-iris-v2.dts
index afc1e01197..f6b31118be 100644
--- a/dts/src/arm/imx6ull-colibri-iris-v2.dts
+++ b/dts/src/arm/imx6ull-colibri-iris-v2.dts
@@ -15,13 +15,21 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
 
+&backlight {
+	status = "okay";
+};
+
 &gpio1 {
 	/* This turns the LVDS transceiver on */
-	lvds-power-on {
+	lvds-power-on-hog {
 		gpio-hog;
 		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
 		line-name = "LVDS_POWER_ON";
@@ -34,7 +42,7 @@
 	 * This switches the LVDS transceiver to the single-channel
 	 * output mode.
 	 */
-	lvds-ch-mode {
+	lvds-ch-mode-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
 		line-name = "LVDS_CH_MODE";
@@ -44,7 +52,7 @@
 	/*
 	 * This switches the LVDS transceiver to the 24-bit RGB mode.
 	 */
-	lvds-rgb-mode {
+	lvds-rgb-mode-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
 		line-name = "LVDS_RGB_MODE";
@@ -56,10 +64,42 @@
 	/*
 	 * This switches the LVDS transceiver to VESA color mapping mode.
 	 */
-	lvds-color-map {
+	lvds-color-map-hog {
 		gpio-hog;
 		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
 		line-name = "LVDS_COLOR_MAP";
 		output-low;
 	};
 };
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/dts/src/arm/imx6ull-colibri-iris.dts b/dts/src/arm/imx6ull-colibri-iris.dts
index 4fb97b0fe3..2a0d0fc3b9 100644
--- a/dts/src/arm/imx6ull-colibri-iris.dts
+++ b/dts/src/arm/imx6ull-colibri-iris.dts
@@ -15,6 +15,26 @@
 		     "fsl,imx6ull";
 };
 
-&atmel_mxt_ts {
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
 	status = "okay";
 };
diff --git a/dts/src/arm/imx6ull-colibri-iris.dtsi b/dts/src/arm/imx6ull-colibri-iris.dtsi
index 7f3b37baba..166a0aefc8 100644
--- a/dts/src/arm/imx6ull-colibri-iris.dtsi
+++ b/dts/src/arm/imx6ull-colibri-iris.dtsi
@@ -59,7 +59,7 @@
 	 * in userspace.
 	 * The same applies to uart1_tx_on.
 	 */
-	uart25_tx_on {
+	uart25_tx_on-hog {
 		gpio-hog;
 		gpios = <15 0>;
 		output-high;
@@ -67,7 +67,7 @@
 };
 
 &gpio2 {
-	uart1_tx_on {
+	uart1_tx_on-hog {
 		gpio-hog;
 		gpios = <7 0>;
 		output-high;
diff --git a/dts/src/arm/imx6ull-colibri-wifi-aster.dts b/dts/src/arm/imx6ull-colibri-wifi-aster.dts
index b4f65e8c58..c7da5b4196 100644
--- a/dts/src/arm/imx6ull-colibri-wifi-aster.dts
+++ b/dts/src/arm/imx6ull-colibri-wifi-aster.dts
@@ -15,6 +15,46 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts b/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts
index 1d64d1a5d8..917f5dbe64 100644
--- a/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts
+++ b/dts/src/arm/imx6ull-colibri-wifi-eval-v3.dts
@@ -12,3 +12,27 @@
 	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts b/dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts
index ce02f8a9dd..488da6df56 100644
--- a/dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts
+++ b/dts/src/arm/imx6ull-colibri-wifi-iris-v2.dts
@@ -15,13 +15,21 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
 
+&backlight {
+	status = "okay";
+};
+
 &gpio1 {
 	/* This turns the LVDS transceiver on */
-	lvds-power-on {
+	lvds-power-on-hog {
 		gpio-hog;
 		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
 		line-name = "LVDS_POWER_ON";
@@ -34,7 +42,7 @@
 	 * This switches the LVDS transceiver to the single-channel
 	 * output mode.
 	 */
-	lvds-ch-mode {
+	lvds-ch-mode-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
 		line-name = "LVDS_CH_MODE";
@@ -44,7 +52,7 @@
 	/*
 	 * This switches the LVDS transceiver to the 24-bit RGB mode.
 	 */
-	lvds-rgb-mode {
+	lvds-rgb-mode-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
 		line-name = "LVDS_RGB_MODE";
@@ -56,10 +64,26 @@
 	/*
 	 * This switches the LVDS transceiver to VESA color mapping mode.
 	 */
-	lvds-color-map {
+	lvds-color-map-hog {
 		gpio-hog;
 		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
 		line-name = "LVDS_COLOR_MAP";
 		output-low;
 	};
 };
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/dts/src/arm/imx6ull-colibri-wifi-iris.dts b/dts/src/arm/imx6ull-colibri-wifi-iris.dts
index 5ac1aa298c..e632532547 100644
--- a/dts/src/arm/imx6ull-colibri-wifi-iris.dts
+++ b/dts/src/arm/imx6ull-colibri-wifi-iris.dts
@@ -15,6 +15,26 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/dts/src/arm/imx6ull-colibri.dtsi b/dts/src/arm/imx6ull-colibri.dtsi
index 577a424b0e..336ab2e053 100644
--- a/dts/src/arm/imx6ull-colibri.dtsi
+++ b/dts/src/arm/imx6ull-colibri.dtsi
@@ -21,7 +21,29 @@
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		power-supply = <&reg_3v3>;
 		pwms = <&pwm4 0 5000000 1>;
-		status = "okay";
+		status = "disabled";
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		label = "USBC";
+		self-powered;
+		type = "micro";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
 	};
 
 	gpio-keys {
@@ -42,7 +64,7 @@
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
-		status = "okay";
+		status = "disabled";
 
 		port {
 			lcd_panel_in: endpoint {
@@ -159,7 +181,7 @@
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
+	status = "disabled";
 
 	/* Atmel maxtouch controller */
 	atmel_mxt_ts: touchscreen@4a {
@@ -202,6 +224,7 @@
 		adi,median-filter-size = /bits/ 8 <2>;
 		adi,averaging = /bits/ 8 <1>;
 		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 };
 
@@ -209,6 +232,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
 
 	port {
 		lcdif_out: endpoint {
@@ -278,6 +302,13 @@
 	srp-disable;
 	hnp-disable;
 	adp-disable;
+	usb-role-switch;
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 /* Colibri USBH */
diff --git a/dts/src/arm/imx7-colibri.dtsi b/dts/src/arm/imx7-colibri.dtsi
index a8c31ee656..f8b8372b68 100644
--- a/dts/src/arm/imx7-colibri.dtsi
+++ b/dts/src/arm/imx7-colibri.dtsi
@@ -29,7 +29,6 @@
 
 	extcon_usbc_det: usbc-det {
 		compatible = "linux,extcon-usb-gpio";
-		debounce = <25>;
 		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usbc_det>;
@@ -652,7 +651,7 @@
 	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
 	 * Don't use them simultaneously.
 	 */
-	pinctrl_atmel_adapter: atmelconnectorgrp {
+	pinctrl_atmel_adapter: atmeladaptergrp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
 			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
@@ -660,7 +659,7 @@
 	};
 
 	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	pinctrl_atmel_connector: atmeladaptergrp {
+	pinctrl_atmel_connector: atmelconnectorgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
 			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
diff --git a/dts/src/arm/imx7d-remarkable2.dts b/dts/src/arm/imx7d-remarkable2.dts
index a2a91bfdd9..8b2f11e85e 100644
--- a/dts/src/arm/imx7d-remarkable2.dts
+++ b/dts/src/arm/imx7d-remarkable2.dts
@@ -22,6 +22,28 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&sy7636a>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	reg_brcm: regulator-brcm {
 		compatible = "regulator-fixed";
 		regulator-name = "brcm_reg";
@@ -84,6 +106,32 @@
 	};
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	sy7636a: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#thermal-sensor-cells = <0>;
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -177,6 +225,13 @@
 		>;
 	};
 
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x00000014
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
@@ -184,6 +239,13 @@
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
diff --git a/dts/src/arm/kirkwood-b3.dts b/dts/src/arm/kirkwood-b3.dts
index a7636fe285..681343c135 100644
--- a/dts/src/arm/kirkwood-b3.dts
+++ b/dts/src/arm/kirkwood-b3.dts
@@ -187,7 +187,7 @@
 
 /* Wifi model has Atheros chipset on pcie port */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-db-88f6281.dts b/dts/src/arm/kirkwood-db-88f6281.dts
index 2adb17c955..a9a8e6b744 100644
--- a/dts/src/arm/kirkwood-db-88f6281.dts
+++ b/dts/src/arm/kirkwood-db-88f6281.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-db-88f6282.dts b/dts/src/arm/kirkwood-db-88f6282.dts
index f84a485399..6dc6579d45 100644
--- a/dts/src/arm/kirkwood-db-88f6282.dts
+++ b/dts/src/arm/kirkwood-db-88f6282.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-dir665.dts b/dts/src/arm/kirkwood-dir665.dts
index c32300611d..f9f4b0143b 100644
--- a/dts/src/arm/kirkwood-dir665.dts
+++ b/dts/src/arm/kirkwood-dir665.dts
@@ -211,18 +211,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan3";
+				reg = <1>;
+				label = "lan3";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan1";
+				reg = <3>;
+				label = "lan1";
 			};
 
 			port@4 {
@@ -268,7 +268,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-ds112.dts b/dts/src/arm/kirkwood-ds112.dts
index f48609e95a..3912f1b525 100644
--- a/dts/src/arm/kirkwood-ds112.dts
+++ b/dts/src/arm/kirkwood-ds112.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/dts/src/arm/kirkwood-ds411.dts b/dts/src/arm/kirkwood-ds411.dts
index 86907be70c..1d4256ef32 100644
--- a/dts/src/arm/kirkwood-ds411.dts
+++ b/dts/src/arm/kirkwood-ds411.dts
@@ -47,7 +47,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/dts/src/arm/kirkwood-iconnect.dts b/dts/src/arm/kirkwood-iconnect.dts
index 95af7aa1fd..aed20185fd 100644
--- a/dts/src/arm/kirkwood-iconnect.dts
+++ b/dts/src/arm/kirkwood-iconnect.dts
@@ -187,7 +187,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-km_common.dtsi b/dts/src/arm/kirkwood-km_common.dtsi
index 75dc83914f..52baffe45f 100644
--- a/dts/src/arm/kirkwood-km_common.dtsi
+++ b/dts/src/arm/kirkwood-km_common.dtsi
@@ -39,7 +39,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-l-50.dts b/dts/src/arm/kirkwood-l-50.dts
index 0d81c43a6a..60c1e94f5d 100644
--- a/dts/src/arm/kirkwood-l-50.dts
+++ b/dts/src/arm/kirkwood-l-50.dts
@@ -223,18 +223,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan6";
+				reg = <2>;
+				label = "lan6";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan2";
+				reg = <3>;
+				label = "lan2";
 			};
 
 			port@4 {
@@ -282,18 +282,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan8";
+				reg = <1>;
+				label = "lan8";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan4";
+				reg = <2>;
+				label = "lan4";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "dmz";
+				reg = <3>;
+				label = "dmz";
 			};
 
 			switch1port5: port@5 {
diff --git a/dts/src/arm/kirkwood-laplug.dts b/dts/src/arm/kirkwood-laplug.dts
index 6158214a93..8c2b540eaf 100644
--- a/dts/src/arm/kirkwood-laplug.dts
+++ b/dts/src/arm/kirkwood-laplug.dts
@@ -160,7 +160,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-linkstation.dtsi b/dts/src/arm/kirkwood-linkstation.dtsi
index 407d6d8b3a..b54c9980f6 100644
--- a/dts/src/arm/kirkwood-linkstation.dtsi
+++ b/dts/src/arm/kirkwood-linkstation.dtsi
@@ -156,7 +156,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-mplcec4.dts b/dts/src/arm/kirkwood-mplcec4.dts
index b80d12f6aa..e87ea71465 100644
--- a/dts/src/arm/kirkwood-mplcec4.dts
+++ b/dts/src/arm/kirkwood-mplcec4.dts
@@ -8,10 +8,10 @@
 	model = "MPL CEC4";
 	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
@@ -66,8 +66,8 @@
 			};
 		};
 
-                i2c@11000 {
-                        status = "okay";
+		i2c@11000 {
+			status = "okay";
 
 			rtc@51 {
 				compatible = "nxp,pcf8563";
@@ -79,7 +79,7 @@
 				reg = <0x57>;
 			};
 
-                };
+		};
 
 		serial@12000 {
 			status = "okay";
@@ -208,7 +208,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts b/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts
index 2e1a753489..ced576acfb 100644
--- a/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts
+++ b/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts
@@ -170,7 +170,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-nas2big.dts b/dts/src/arm/kirkwood-nas2big.dts
index 6a2934b7d0..0b0a150931 100644
--- a/dts/src/arm/kirkwood-nas2big.dts
+++ b/dts/src/arm/kirkwood-nas2big.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-net2big.dts b/dts/src/arm/kirkwood-net2big.dts
index 3e3ac289e5..d5f6bb50ba 100644
--- a/dts/src/arm/kirkwood-net2big.dts
+++ b/dts/src/arm/kirkwood-net2big.dts
@@ -46,11 +46,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
diff --git a/dts/src/arm/kirkwood-net5big.dts b/dts/src/arm/kirkwood-net5big.dts
index cba8a2b6f6..2497ad26b5 100644
--- a/dts/src/arm/kirkwood-net5big.dts
+++ b/dts/src/arm/kirkwood-net5big.dts
@@ -78,11 +78,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	netxbig-leds {
diff --git a/dts/src/arm/kirkwood-netgear_readynas_nv+_v2.dts b/dts/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
index b13aee5708..6cf76430cf 100644
--- a/dts/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/dts/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
@@ -78,11 +78,11 @@
 		};
 
 		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <8192>;
+			};
 		};
 
 		i2c@11000 {
@@ -266,7 +266,7 @@
 
 /* Connected to NEC uPD720200 USB 3.0 controller */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-nsa310.dts b/dts/src/arm/kirkwood-nsa310.dts
index 9b861c2e76..c1799a0781 100644
--- a/dts/src/arm/kirkwood-nsa310.dts
+++ b/dts/src/arm/kirkwood-nsa310.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-nsa310s.dts b/dts/src/arm/kirkwood-nsa310s.dts
new file mode 100644
index 0000000000..49da633a1b
--- /dev/null
+++ b/dts/src/arm/kirkwood-nsa310s.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "ZyXEL NSA310S";
+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb0_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata1_power: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		disk-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd_temp>;
+
+			trips {
+				disk_alert: disk-alert {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				disk_crit: disk-crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "htk,ht1382";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		phy-mode = "rgmii-id";
+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
+				   <0x1 0x10 0x0 0x1017>,
+				   <0x1 0x11 0x0 0x4408>,
+				   <0x1 0x16 0x0 0x0>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x00c0000>;
+		read-only;
+	};
+	partition@c0000 {
+		label = "uboot_env";
+		reg = <0x00c0000 0x0080000>;
+	};
+	partition@140000 {
+		label = "ubi";
+		reg = <0x0140000 0x7ec0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp24", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+						"mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_power: pmx-power {
+		marvell,pins = "mpp21", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/dts/src/arm/kirkwood-nsa320.dts b/dts/src/arm/kirkwood-nsa320.dts
index b69b096f26..652405e650 100644
--- a/dts/src/arm/kirkwood-nsa320.dts
+++ b/dts/src/arm/kirkwood-nsa320.dts
@@ -211,7 +211,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-nsa325.dts b/dts/src/arm/kirkwood-nsa325.dts
index 6f8085dbb1..371456de34 100644
--- a/dts/src/arm/kirkwood-nsa325.dts
+++ b/dts/src/arm/kirkwood-nsa325.dts
@@ -224,7 +224,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-nsa3x0-common.dtsi b/dts/src/arm/kirkwood-nsa3x0-common.dtsi
index 8f73197f25..ea3d36512e 100644
--- a/dts/src/arm/kirkwood-nsa3x0-common.dtsi
+++ b/dts/src/arm/kirkwood-nsa3x0-common.dtsi
@@ -150,7 +150,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-rd88f6192.dts b/dts/src/arm/kirkwood-rd88f6192.dts
index 712d6042b1..f00325ffde 100644
--- a/dts/src/arm/kirkwood-rd88f6192.dts
+++ b/dts/src/arm/kirkwood-rd88f6192.dts
@@ -31,10 +31,10 @@
 			pinctrl-0 = <&pmx_usb_power>;
 			pinctrl-names = "default";
 
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
 		};
 
 		serial@12000 {
@@ -62,43 +62,43 @@
 	};
 
 	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
 	};
 };
 
 &mdio {
-        status = "okay";
+	status = "okay";
 
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
 };
 
 &eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-rd88f6281-z0.dts b/dts/src/arm/kirkwood-rd88f6281-z0.dts
index 9d88301daf..72edd47e19 100644
--- a/dts/src/arm/kirkwood-rd88f6281-z0.dts
+++ b/dts/src/arm/kirkwood-rd88f6281-z0.dts
@@ -19,7 +19,7 @@
 };
 
 &eth1 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &switch {
diff --git a/dts/src/arm/kirkwood-rd88f6281.dtsi b/dts/src/arm/kirkwood-rd88f6281.dtsi
index f1f8eee132..e21aa67494 100644
--- a/dts/src/arm/kirkwood-rd88f6281.dtsi
+++ b/dts/src/arm/kirkwood-rd88f6281.dtsi
@@ -48,7 +48,7 @@
 			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 			/* No WP GPIO */
 		};
-       };
+	};
 };
 
 &nand {
@@ -126,7 +126,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-rs212.dts b/dts/src/arm/kirkwood-rs212.dts
index c51cea8832..4ad412115a 100644
--- a/dts/src/arm/kirkwood-rs212.dts
+++ b/dts/src/arm/kirkwood-rs212.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/dts/src/arm/kirkwood-synology.dtsi b/dts/src/arm/kirkwood-synology.dtsi
index 8f6c387d3a..9b6666020c 100644
--- a/dts/src/arm/kirkwood-synology.dtsi
+++ b/dts/src/arm/kirkwood-synology.dtsi
@@ -847,7 +847,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-t5325.dts b/dts/src/arm/kirkwood-t5325.dts
index fe63b3a03a..ad093324e0 100644
--- a/dts/src/arm/kirkwood-t5325.dts
+++ b/dts/src/arm/kirkwood-t5325.dts
@@ -219,7 +219,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood-ts219.dtsi b/dts/src/arm/kirkwood-ts219.dtsi
index 994cabcf4b..1939462a5f 100644
--- a/dts/src/arm/kirkwood-ts219.dtsi
+++ b/dts/src/arm/kirkwood-ts219.dtsi
@@ -86,7 +86,7 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
@@ -98,7 +98,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/dts/src/arm/kirkwood.dtsi b/dts/src/arm/kirkwood.dtsi
index fca31a5d5a..815ef7719d 100644
--- a/dts/src/arm/kirkwood.dtsi
+++ b/dts/src/arm/kirkwood.dtsi
@@ -24,9 +24,9 @@
 	};
 
 	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		i2c0 = &i2c0;
 	};
 
 	mbus@f1000000 {
@@ -279,15 +279,15 @@
 			clocks = <&gate_clk 8>;
 
 			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <5>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <6>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
@@ -299,15 +299,15 @@
 			clocks = <&gate_clk 16>;
 
 			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <7>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <8>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
diff --git a/dts/src/arm/lan966x-pcb8290.dts b/dts/src/arm/lan966x-pcb8290.dts
index 77187f59f0..8804e8ba53 100644
--- a/dts/src/arm/lan966x-pcb8290.dts
+++ b/dts/src/arm/lan966x-pcb8290.dts
@@ -58,41 +58,57 @@
 
 	ext_phy0: ethernet-phy@7 {
 		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy1: ethernet-phy@8 {
 		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy2: ethernet-phy@9 {
 		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy3: ethernet-phy@10 {
 		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy4: ethernet-phy@15 {
 		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy5: ethernet-phy@16 {
 		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy6: ethernet-phy@17 {
 		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy7: ethernet-phy@18 {
 		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 };
diff --git a/dts/src/arm/lan966x.dtsi b/dts/src/arm/lan966x.dtsi
index 0bf8187134..05b73f7cf0 100644
--- a/dts/src/arm/lan966x.dtsi
+++ b/dts/src/arm/lan966x.dtsi
@@ -157,6 +157,11 @@
 			};
 		};
 
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
 		flx0: flexcom@e0040000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe0040000 0x100>;
diff --git a/dts/src/arm/logicpd-torpedo-baseboard.dtsi b/dts/src/arm/logicpd-torpedo-baseboard.dtsi
index d3da8b1b47..e0cbac500e 100644
--- a/dts/src/arm/logicpd-torpedo-baseboard.dtsi
+++ b/dts/src/arm/logicpd-torpedo-baseboard.dtsi
@@ -59,7 +59,7 @@
 		};
 	};
 
-	pwm10: dmtimer-pwm {
+	pwm10: pwm-10 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
diff --git a/dts/src/arm/logicpd-torpedo-som.dtsi b/dts/src/arm/logicpd-torpedo-som.dtsi
index 3a5228562b..72b5af475d 100644
--- a/dts/src/arm/logicpd-torpedo-som.dtsi
+++ b/dts/src/arm/logicpd-torpedo-som.dtsi
@@ -20,7 +20,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user0 {
+		led-user0 {
 			label = "user0";
 			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
 			linux,default-trigger = "none";
diff --git a/dts/src/arm/lpc32xx.dtsi b/dts/src/arm/lpc32xx.dtsi
index c87066d6c9..974410918f 100644
--- a/dts/src/arm/lpc32xx.dtsi
+++ b/dts/src/arm/lpc32xx.dtsi
@@ -315,7 +315,7 @@
 			/* System Control Block */
 			scb {
 				compatible = "simple-bus";
-				ranges = <0x0 0x040004000 0x00001000>;
+				ranges = <0x0 0x40004000 0x00001000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 
diff --git a/dts/src/arm/ls1021a-moxa-uc-8410a.dts b/dts/src/arm/ls1021a-moxa-uc-8410a.dts
index f3ddea934f..d2cae8c7d7 100644
--- a/dts/src/arm/ls1021a-moxa-uc-8410a.dts
+++ b/dts/src/arm/ls1021a-moxa-uc-8410a.dts
@@ -30,11 +30,11 @@
 	};
 
 	reg_3p3v: regulator-3p3v {
-		  compatible = "regulator-fixed";
-		  regulator-name = "3P3V";
-		  regulator-min-microvolt = <3300000>;
-		  regulator-max-microvolt = <3300000>;
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	leds {
diff --git a/dts/src/arm/motorola-mapphone-common.dtsi b/dts/src/arm/motorola-mapphone-common.dtsi
index c7a1f3ffc4..f7cc8fc678 100644
--- a/dts/src/arm/motorola-mapphone-common.dtsi
+++ b/dts/src/arm/motorola-mapphone-common.dtsi
@@ -133,7 +133,7 @@
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
 
-	pwm8: dmtimer-pwm-8 {
+	pwm8: pwm-8 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_direction_pin>;
 
@@ -143,7 +143,7 @@
 		ti,clock-source = <0x01>;
 	};
 
-	pwm9: dmtimer-pwm-9 {
+	pwm9: pwm-9 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_enable_pin>;
 
diff --git a/dts/src/arm/nuvoton-npcm730-gbs.dts b/dts/src/arm/nuvoton-npcm730-gbs.dts
index d10669fcd5..9e9eba8bad 100644
--- a/dts/src/arm/nuvoton-npcm730-gbs.dts
+++ b/dts/src/arm/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/nuvoton-npcm730-gsj.dts b/dts/src/arm/nuvoton-npcm730-gsj.dts
index 491606c4f0..2a394cc152 100644
--- a/dts/src/arm/nuvoton-npcm730-gsj.dts
+++ b/dts/src/arm/nuvoton-npcm730-gsj.dts
@@ -142,7 +142,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/nuvoton-npcm730-kudo.dts b/dts/src/arm/nuvoton-npcm730-kudo.dts
index a0c2d76526..f7b38bee03 100644
--- a/dts/src/arm/nuvoton-npcm730-kudo.dts
+++ b/dts/src/arm/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -422,7 +422,7 @@
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -447,7 +447,7 @@
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/nuvoton-npcm750-evb.dts b/dts/src/arm/nuvoton-npcm750-evb.dts
index 3dad32834e..f53d45fa1d 100644
--- a/dts/src/arm/nuvoton-npcm750-evb.dts
+++ b/dts/src/arm/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -135,7 +135,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts b/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts
index 132e702281..87359ab05d 100644
--- a/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts
+++ b/dts/src/arm/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,7 +107,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -146,7 +146,7 @@
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -173,7 +173,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/dts/src/arm/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 3ee61251a1..b78c116cbc 100644
--- a/dts/src/arm/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/dts/src/arm/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -15,6 +15,11 @@
 	model = "Supermicro X9SCi-LN4F BMC";
 	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -53,6 +58,33 @@
 	};
 };
 
+&fiu {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* 0 */ "", "host-reset-control-n", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid",
+		/* 8 */ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "", "", "", "power-chassis-good";
+};
+
 &pinctrl {
 	key_pins: mux-keys {
 		groups = "gspi", "sspi";
@@ -77,7 +109,3 @@
 	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
 	status = "okay";
 };
-
-&watchdog0 {
-	status = "okay";
-};
diff --git a/dts/src/arm/nuvoton-wpcm450.dtsi b/dts/src/arm/nuvoton-wpcm450.dtsi
index 93595850a4..b637241316 100644
--- a/dts/src/arm/nuvoton-wpcm450.dtsi
+++ b/dts/src/arm/nuvoton-wpcm450.dtsi
@@ -37,6 +37,14 @@
 		#clock-cells = <0>;
 	};
 
+	refclk: clock-48mhz {
+		/* 48 MHz reference oscillator */
+		compatible = "fixed-clock";
+		clock-output-names = "ref";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -49,6 +57,15 @@
 			reg = <0xb0000000 0x200>;
 		};
 
+		clk: clock-controller@b0000200 {
+			compatible = "nuvoton,wpcm450-clk";
+			reg = <0xb0000200 0x100>;
+			clocks = <&refclk>;
+			clock-names = "ref";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		serial0: serial@b8000000 {
 			compatible = "nuvoton,wpcm450-uart";
 			reg = <0xb8000000 0x20>;
@@ -81,7 +98,6 @@
 			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xb800101c 0x4>;
 			clocks = <&clk24m>;
-			status = "disabled";
 		};
 
 		aic: interrupt-controller@b8002000 {
@@ -456,5 +472,21 @@
 				function = "hg7";
 			};
 		};
+
+		fiu: spi-controller@c8000000 {
+			compatible = "nuvoton,wpcm450-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+			reg-names = "control", "memory";
+			clocks = <&clk 0>;
+			status = "disabled";
+		};
+
+		shm: syscon@c8001000 {
+			compatible = "nuvoton,wpcm450-shm", "syscon";
+			reg = <0xc8001000 0x1000>;
+			reg-io-width = <1>;
+		};
 	};
 };
diff --git a/dts/src/arm/omap-gpmc-smsc911x.dtsi b/dts/src/arm/omap-gpmc-smsc911x.dtsi
index ce6c235f68..3046ec5726 100644
--- a/dts/src/arm/omap-gpmc-smsc911x.dtsi
+++ b/dts/src/arm/omap-gpmc-smsc911x.dtsi
@@ -8,9 +8,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git a/dts/src/arm/omap-gpmc-smsc9221.dtsi b/dts/src/arm/omap-gpmc-smsc9221.dtsi
index e7534fe9c5..bc8961f369 100644
--- a/dts/src/arm/omap-gpmc-smsc9221.dtsi
+++ b/dts/src/arm/omap-gpmc-smsc9221.dtsi
@@ -12,9 +12,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git a/dts/src/arm/omap3-beagle.dts b/dts/src/arm/omap3-beagle.dts
index 0548b39133..47ff1ffddf 100644
--- a/dts/src/arm/omap3-beagle.dts
+++ b/dts/src/arm/omap3-beagle.dts
@@ -28,18 +28,18 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pmu_stat {
+		led-pmu-stat {
 			label = "beagleboard::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
 
-		heartbeat {
+		led-heartbeat {
 			label = "beagleboard::usr0";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "beagleboard::usr1";
 			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
 			linux,default-trigger = "mmc0";
diff --git a/dts/src/arm/omap3-cm-t3517.dts b/dts/src/arm/omap3-cm-t3517.dts
index 3b8349094b..f25c0a84a1 100644
--- a/dts/src/arm/omap3-cm-t3517.dts
+++ b/dts/src/arm/omap3-cm-t3517.dts
@@ -11,12 +11,12 @@
 	model = "CompuLab CM-T3517";
 	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
 
-	vmmc:  regulator-vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
diff --git a/dts/src/arm/omap3-devkit8000-common.dtsi b/dts/src/arm/omap3-devkit8000-common.dtsi
index 54cd37336b..38aa1febc3 100644
--- a/dts/src/arm/omap3-devkit8000-common.dtsi
+++ b/dts/src/arm/omap3-devkit8000-common.dtsi
@@ -15,28 +15,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		heartbeat {
+		led-heartbeat {
 			label = "devkit8000::led1";
 			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "devkit8000::led2";
 			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
 			default-state = "on";
 			linux,default-trigger = "none";
 		};
 
-		usr {
+		led-usr {
 			label = "devkit8000::led3";
 			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
 			default-state = "on";
 			linux,default-trigger = "usr";
 		};
 
-		pmu_stat {
+		led-pmu-stat {
 			label = "devkit8000::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
diff --git a/dts/src/arm/omap3-echo.dts b/dts/src/arm/omap3-echo.dts
index 8f02ff5e7d..06d2377d28 100644
--- a/dts/src/arm/omap3-echo.dts
+++ b/dts/src/arm/omap3-echo.dts
@@ -146,7 +146,7 @@
 		label = "q1";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+		enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
 
 		multi-led@0 {
 			#address-cells = <1>;
diff --git a/dts/src/arm/omap3-gta04.dtsi b/dts/src/arm/omap3-gta04.dtsi
index 28a6a9345b..87e0ab1bbe 100644
--- a/dts/src/arm/omap3-gta04.dtsi
+++ b/dts/src/arm/omap3-gta04.dtsi
@@ -147,7 +147,7 @@
 		pinctrl-0 = <&backlight_pins>;
 	};
 
-	pwm11: dmtimer-pwm {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		ti,timers = <&timer11>;
 		#pwm-cells = <3>;
@@ -332,7 +332,7 @@
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
-       };
+	};
 
 	gps_pins: pinmux_gps_pins {
 		pinctrl-single,pins = <
@@ -853,8 +853,8 @@
 };
 
 &hdqw1w {
-        pinctrl-names = "default";
-        pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
 };
 
 /* image signal processor within OMAP3 SoC */
diff --git a/dts/src/arm/omap3-ldp.dts b/dts/src/arm/omap3-ldp.dts
index 36fc8805e0..85f33bbb56 100644
--- a/dts/src/arm/omap3-ldp.dts
+++ b/dts/src/arm/omap3-ldp.dts
@@ -301,5 +301,5 @@
 
 &vaux1 {
 	/* Needed for ads7846 */
-        regulator-name = "vcc";
+	regulator-name = "vcc";
 };
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
index dd79715564..6ba2e8f819 100644
--- a/dts/src/arm/omap3-n900.dts
+++ b/dts/src/arm/omap3-n900.dts
@@ -49,7 +49,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "debug::sleep";
 			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* 162 */
 			linux,default-trigger = "default-on";
@@ -156,7 +156,7 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	pwm9: dmtimer-pwm {
+	pwm9: pwm-9 {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
 		ti,timers = <&timer9>;
@@ -236,27 +236,27 @@
 		pinctrl-single,pins = <
 
 			/* address lines */
-                        OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
-                        OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
-                        OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 
 			/* data lines, gpmc_d0..d7 not muxable according to TRM */
-                        OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
-                        OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
-                        OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
-                        OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
-                        OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
-                        OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
-                        OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
-                        OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 
 			/*
 			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 			 */
-                        OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
-                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+			>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
@@ -738,12 +738,12 @@
 
 	si4713: si4713@63 {
 		compatible = "silabs,si4713";
-                reg = <0x63>;
+		reg = <0x63>;
 
-                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
-                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
-                vio-supply = <&vio>;
-                vdd-supply = <&vaux1>;
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+		reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+		vio-supply = <&vio>;
+		vdd-supply = <&vaux1>;
 	};
 
 	bq24150a: bq24150a@6b {
diff --git a/dts/src/arm/omap3-overo-alto35-common.dtsi b/dts/src/arm/omap3-overo-alto35-common.dtsi
index bb932913c9..a6dbbba799 100644
--- a/dts/src/arm/omap3-overo-alto35-common.dtsi
+++ b/dts/src/arm/omap3-overo-alto35-common.dtsi
@@ -17,19 +17,19 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		gpio148 {
+		led-gpio148 {
 			label = "overo:red:gpio148";
 			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
 		};
-		gpio150 {
+		led-gpio150 {
 			label = "overo:yellow:gpio150";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
 		};
-		gpio151 {
+		led-gpio151 {
 			label = "overo:blue:gpio151";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
 		};
-		gpio170 {
+		led-gpio170 {
 			label = "overo:green:gpio170";
 			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
 		};
diff --git a/dts/src/arm/omap3-overo-chestnut43-common.dtsi b/dts/src/arm/omap3-overo-chestnut43-common.dtsi
index 2d2c61d7aa..0d0e62c009 100644
--- a/dts/src/arm/omap3-overo-chestnut43-common.dtsi
+++ b/dts/src/arm/omap3-overo-chestnut43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/dts/src/arm/omap3-overo-gallop43-common.dtsi b/dts/src/arm/omap3-overo-gallop43-common.dtsi
index 155aec1214..5f6721326f 100644
--- a/dts/src/arm/omap3-overo-gallop43-common.dtsi
+++ b/dts/src/arm/omap3-overo-gallop43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/dts/src/arm/omap3-overo-palo35-common.dtsi b/dts/src/arm/omap3-overo-palo35-common.dtsi
index 82a0446674..4b66f622ac 100644
--- a/dts/src/arm/omap3-overo-palo35-common.dtsi
+++ b/dts/src/arm/omap3-overo-palo35-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/dts/src/arm/omap3-overo-palo43-common.dtsi b/dts/src/arm/omap3-overo-palo43-common.dtsi
index 453a55324f..a8f163a899 100644
--- a/dts/src/arm/omap3-overo-palo43-common.dtsi
+++ b/dts/src/arm/omap3-overo-palo43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/dts/src/arm/omap3-overo-summit-common.dtsi b/dts/src/arm/omap3-overo-summit-common.dtsi
index df7450f17f..ec03ca17e9 100644
--- a/dts/src/arm/omap3-overo-summit-common.dtsi
+++ b/dts/src/arm/omap3-overo-summit-common.dtsi
@@ -15,7 +15,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
diff --git a/dts/src/arm/omap3-overo-tobi-common.dtsi b/dts/src/arm/omap3-overo-tobi-common.dtsi
index 9bf4b88a4b..5432e4e16a 100644
--- a/dts/src/arm/omap3-overo-tobi-common.dtsi
+++ b/dts/src/arm/omap3-overo-tobi-common.dtsi
@@ -13,7 +13,7 @@
 / {
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/dts/src/arm/omap3-zoom3.dts b/dts/src/arm/omap3-zoom3.dts
index 0482676d18..ce58b1f208 100644
--- a/dts/src/arm/omap3-zoom3.dts
+++ b/dts/src/arm/omap3-zoom3.dts
@@ -23,9 +23,9 @@
 	};
 
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
@@ -84,28 +84,28 @@
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
@@ -205,22 +205,22 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 };
 
 &uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 };
 
 &uart4 {
-       status = "disabled";
+	status = "disabled";
 };
 
 &usb_otg_hs {
diff --git a/dts/src/arm/omap3.dtsi b/dts/src/arm/omap3.dtsi
index 825075ff0e..92cd4c99da 100644
--- a/dts/src/arm/omap3.dtsi
+++ b/dts/src/arm/omap3.dtsi
@@ -893,15 +893,37 @@
 			#gpio-cells = <2>;
 		};
 
-		usb_otg_hs: usb_otg_hs@480ab000 {
-			compatible = "ti,omap3-musb";
-			reg = <0x480ab000 0x1000>;
-			interrupts = <92>, <93>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
+		usb_otg_target: target-module@480ab000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480ab400 0x4>,
+			      <0x480ab404 0x4>,
+			      <0x480ab408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Clock defined in the SoC specific dtsi file */
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x480ab000 0x1000>;
+
+			usb_otg_hs: usb@0 {
+				compatible = "ti,omap3-musb";
+				reg = <0 0x1000>;
+				interrupts = <92>, <93>;
+				interrupt-names = "mc", "dma";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+			};
 		};
 
 		dss: dss@48050000 {
diff --git a/dts/src/arm/omap34xx.dtsi b/dts/src/arm/omap34xx.dtsi
index 2eb73ae7ef..9dbf62797f 100644
--- a/dts/src/arm/omap34xx.dtsi
+++ b/dts/src/arm/omap34xx.dtsi
@@ -189,6 +189,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/dts/src/arm/omap36xx.dtsi b/dts/src/arm/omap36xx.dtsi
index 32ac7924a1..fff9c3d341 100644
--- a/dts/src/arm/omap36xx.dtsi
+++ b/dts/src/arm/omap36xx.dtsi
@@ -240,6 +240,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/dts/src/arm/omap4-cpu-thermal.dtsi b/dts/src/arm/omap4-cpu-thermal.dtsi
index 4d7eeb133d..801b4f1035 100644
--- a/dts/src/arm/omap4-cpu-thermal.dtsi
+++ b/dts/src/arm/omap4-cpu-thermal.dtsi
@@ -13,20 +13,20 @@ cpu_thermal: cpu_thermal {
 	polling-delay = <1000>; /* milliseconds */
 
 			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap     0>;
 
 	cpu_trips: trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
+		cpu_alert0: cpu_alert {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
 
 	cpu_cooling_maps: cooling-maps {
 		map0 {
diff --git a/dts/src/arm/omap4-panda-common.dtsi b/dts/src/arm/omap4-panda-common.dtsi
index 518652a599..0269424350 100644
--- a/dts/src/arm/omap4-panda-common.dtsi
+++ b/dts/src/arm/omap4-panda-common.dtsi
@@ -49,13 +49,13 @@
 			&led_wkgpio_pins
 		>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "pandaboard::status1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "pandaboard::status2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
diff --git a/dts/src/arm/omap4-panda-es.dts b/dts/src/arm/omap4-panda-es.dts
index 7c6886cd73..7631029e4d 100644
--- a/dts/src/arm/omap4-panda-es.dts
+++ b/dts/src/arm/omap4-panda-es.dts
@@ -79,10 +79,10 @@
 		&led_wkgpio_pins
 	>;
 
-	heartbeat {
+	led-heartbeat {
 		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
 	};
-	mmc {
+	led-mmc {
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/dts/src/arm/omap5-cm-t54.dts b/dts/src/arm/omap5-cm-t54.dts
index ca759b7b8a..2d87b9fc23 100644
--- a/dts/src/arm/omap5-cm-t54.dts
+++ b/dts/src/arm/omap5-cm-t54.dts
@@ -84,36 +84,36 @@
 	};
 
 	lcd0: display {
-                compatible = "startek,startek-kd050c", "panel-dpi";
-                label = "lcd";
-
-                pinctrl-names = "default";
-                pinctrl-0 = <&lcd_pins>;
-
-                enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
-
-                panel-timing {
-                        clock-frequency = <33000000>;
-                        hactive = <800>;
-                        vactive = <480>;
-                        hfront-porch = <40>;
-                        hback-porch = <40>;
-                        hsync-len = <43>;
-                        vback-porch = <29>;
-                        vfront-porch = <13>;
-                        vsync-len = <3>;
-                        hsync-active = <0>;
-                        vsync-active = <0>;
-                        de-active = <1>;
-                        pixelclk-active = <1>;
-                };
-
-                port {
-                        lcd_in: endpoint {
-                                remote-endpoint = <&dpi_lcd_out>;
-                        };
-                };
-        };
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
 
 	hdmi0: connector0 {
 		compatible = "hdmi-connector";
@@ -644,8 +644,8 @@
 };
 
 &usb3 {
-       extcon = <&extcon_usb3>;
-       vbus-supply = <&smps10_out1_reg>;
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
 };
 
 &cpu0 {
diff --git a/dts/src/arm/pxa168.dtsi b/dts/src/arm/pxa168.dtsi
index 4fe7735c7c..16212b912b 100644
--- a/dts/src/arm/pxa168.dtsi
+++ b/dts/src/arm/pxa168.dtsi
@@ -53,6 +53,8 @@
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
 				interrupts = <13>;
+				clocks = <&soc_clocks PXA168_CLK_TIMER>;
+				resets = <&soc_clocks PXA168_CLK_TIMER>;
 			};
 
 			uart1: serial@d4017000 {
diff --git a/dts/src/arm/qcom-apq8026-asus-sparrow.dts b/dts/src/arm/qcom-apq8026-asus-sparrow.dts
index 215613c652..7a80e1c9f1 100644
--- a/dts/src/arm/qcom-apq8026-asus-sparrow.dts
+++ b/dts/src/arm/qcom-apq8026-asus-sparrow.dts
@@ -87,7 +87,7 @@
 };
 
 &rpm_requests {
-	pm8226-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
 		pm8226_s3: s3 {
diff --git a/dts/src/arm/qcom-apq8026-huawei-sturgeon.dts b/dts/src/arm/qcom-apq8026-huawei-sturgeon.dts
new file mode 100644
index 0000000000..d64096028a
--- /dev/null
+++ b/dts/src/arm/qcom-apq8026-huawei-sturgeon.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "Huawei Watch";
+	compatible = "huawei,sturgeon", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 4>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c5 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vio-supply = <&pm8226_lvs1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-voltage = <4370000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,minimum-input-voltage = <4350000>;
+	qcom,fast-charge-current-limit = <300000>;
+	qcom,fast-charge-safe-current = <600000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+};
+
+&tlmm {
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio63", "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default_state: touch-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/dts/src/arm/qcom-apq8026-lg-lenok.dts b/dts/src/arm/qcom-apq8026-lg-lenok.dts
index 193569f0ca..de2fb1c01b 100644
--- a/dts/src/arm/qcom-apq8026-lg-lenok.dts
+++ b/dts/src/arm/qcom-apq8026-lg-lenok.dts
@@ -13,6 +13,7 @@
 / {
 	model = "LG G Watch R";
 	compatible = "lg,lenok", "qcom,apq8026";
+	chassis-type = "watch";
 	qcom,board-id = <132 0x0a>;
 	qcom,msm-id = <199 0x20000>;
 
@@ -115,7 +116,7 @@
 };
 
 &rpm_requests {
-	pm8226-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
 		pm8226_s3: s3 {
@@ -299,8 +300,8 @@
 		input-enable;
 	};
 
-	touch_pins: touch {
-		irq {
+	touch_pins: touch-state {
+		irq-pins {
 			pins = "gpio17";
 			function = "gpio";
 
@@ -309,7 +310,7 @@
 			input-enable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio16";
 			function = "gpio";
 
diff --git a/dts/src/arm/qcom-apq8026-samsung-matisse-wifi.dts b/dts/src/arm/qcom-apq8026-samsung-matisse-wifi.dts
new file mode 100644
index 0000000000..1c52337af5
--- /dev/null
+++ b/dts/src/arm/qcom-apq8026-samsung-matisse-wifi.dts
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1";
+	compatible = "samsung,matisse-wifi", "qcom,apq8026";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		display0 = &framebuffer0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <1280>;
+			height = <800>;
+			stride = <(1280 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default_state>;
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		/delete-node/ smem@3000000;
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default_state>;
+
+		st,drdy-int-pin = <1>;
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_int_default_state>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_int_rst_default_state>;
+
+		reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/dts/src/arm/qcom-apq8060-dragonboard.dts b/dts/src/arm/qcom-apq8060-dragonboard.dts
index 573e4dc66b..7a4c59e04a 100644
--- a/dts/src/arm/qcom-apq8060-dragonboard.dts
+++ b/dts/src/arm/qcom-apq8060-dragonboard.dts
@@ -81,931 +81,899 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
 	};
+};
 
-	soc {
-		pinctrl@800000 {
-			/* eMMC pins, all 8 data lines connected */
-			dragon_sdcc1_pins: sdcc1 {
-				mux {
-					pins = "gpio159", "gpio160", "gpio161",
-					     "gpio162", "gpio163", "gpio164",
-					     "gpio165", "gpio166", "gpio167",
-					     "gpio168";
-					     function = "sdc1";
-				};
-				clk {
-					pins = "gpio167"; /* SDC1 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio168"; /* SDC1 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC1 D0 to D7 */
-					pins = "gpio159", "gpio160", "gpio161", "gpio162",
-					     "gpio163", "gpio164", "gpio165", "gpio166";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
+&ebi2 {
+	/* The EBI2 will instantiate first, then populate its children */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_ebi2_pins>;
+	status = "okay";
 
-			/*
-			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
-			 * configuration.
-			 */
-			dragon_sdcc3_pins: sdcc3 {
-				clk {
-					pins = "sdc3_clk";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				cmd {
-					pins = "sdc3_cmd";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				data {
-					pins = "sdc3_data";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
+	/*
+	 * An on-board SMSC LAN9221 chip for "debug ethernet",
+	 * which is actually just an ordinary ethernet on the
+	 * EBI2. This has a 25MHz chrystal next to it, so no
+	 * clocking is needed.
+	 */
+	ethernet@2,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <2 0x0 0x100>;
+		/*
+		 * The second interrupt is the PME interrupt
+		 * for network wakeup, connected to the TLMM.
+		 */
+		interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+				    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+		vdd33a-supply = <&dragon_veth>;
+		vddvario-supply = <&dragon_vario>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ethernet_gpios>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,force-external-phy;
+		smsc,irq-push-pull;
+
+		/*
+		 * SLOW chipselect config
+		 * Delay 9 cycles (140ns@64MHz) between SMSC
+		 * LAN9221 Ethernet controller reads and writes
+		 * on CS2.
+		 */
+		qcom,xmem-recovery-cycles = <0>;
+		qcom,xmem-write-hold-cycles = <3>;
+		qcom,xmem-write-delta-cycles = <31>;
+		qcom,xmem-read-delta-cycles = <28>;
+		qcom,xmem-write-wait-cycles = <9>;
+		qcom,xmem-read-wait-cycles = <9>;
+	};
+};
 
-			/* Second SD card slot pins */
-			dragon_sdcc5_pins: sdcc5 {
-				mux {
-					pins = "gpio95", "gpio96", "gpio97",
-					    "gpio98", "gpio99", "gpio100";
-					function = "sdc5";
-				};
-				clk {
-					pins = "gpio97"; /* SDC5 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio95"; /* SDC5 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC5 D0 to D3 */
-					pins = "gpio96", "gpio98", "gpio99", "gpio100";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			dragon_gsbi3_i2c_pins: gsbi3_i2c {
-				mux {
-					pins = "gpio43", "gpio44";
-					function = "gsbi3";
-				};
-				pinconf {
-					pins = "gpio43", "gpio44";
-					drive-strength = <8>;
-					/* These have external pull-up 2.2kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi3_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,cy8ctma340";
+		reg = <0x24>;
+		/* Certainly we can do at least 400 kHz */
+		clock-frequency = <400000>;
+		/* IRQ on GPIO61 called /CTP_INT */
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * The I2C bus is using a PCA9306 level translator from L16A
+		 * to L2B so these two voltages are needed and L16A is
+		 * kind of the IO voltage, however L16Aisn't really fed to
+		 * the TMA340, which relies entirely on L2B (PM8901 L2).
+		 */
+		vcpin-supply = <&pm8058_l16>;
+		vdd-supply = <&pm8901_l2>;
+		/* GPIO58, called WAKE_CTP */
+		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		active-interval-ms = <0>;
+		touch-timeout-ms = <255>;
+		lowpower-interval-ms = <10>;
+		bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_tma340_gpios>;
+	};
+};
 
-			dragon_gsbi8_i2c_pins: gsbi8_i2c {
-				mux {
-					pins = "gpio64", "gpio65";
-					function = "gsbi8";
-				};
-				pinconf {
-					pins = "gpio64", "gpio65";
-					drive-strength = <16>;
-					/* These have external pull-up 2.2kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			dragon_gsbi12_i2c_pins: gsbi12_i2c {
-				mux {
-					pins = "gpio115", "gpio116";
-					function = "gsbi12";
-				};
-				pinconf {
-					pins = "gpio115", "gpio116";
-					drive-strength = <16>;
-					/* These have external pull-up 4.7kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi8_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
+	status = "okay";
+
+	eeprom@52 {
+		/* A 16KiB Platform ID EEPROM on the CPU carrier board */
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		vcc-supply = <&pm8058_s3>;
+		pagesize = <64>;
+	};
+	wm8903: wm8903@1a {
+		/* This Woolfson Micro device has an unrouted interrupt line */
+		compatible = "wlf,wm8903";
+		reg = <0x1a>;
+
+		AVDD-supply = <&pm8058_l16>;
+		CPVDD-supply = <&pm8058_l16>;
+		DBVDD-supply = <&pm8058_s3>;
+		DCVDD-supply = <&pm8058_l0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		micdet-cfg = <0>;
+		micdet-delay = <100>;
+		gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+	};
+};
 
-			/* Primary serial port uart 0 pins */
-			dragon_gsbi12_serial_pins: gsbi12_serial {
-				mux {
-					pins = "gpio117", "gpio118";
-					function = "gsbi12";
-				};
-				tx {
-					pins = "gpio117";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				rx {
-					pins = "gpio118";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
 
-			dragon_ebi2_pins: ebi2 {
-				/*
-				 * Pins used by EBI2 on the Dragonboard, actually only
-				 * CS2 is used by a real peripheral. CS0 is just
-				 * routed to a test point.
-				 */
-				mux0 {
-					pins =
-					    /* "gpio39", CS1A_N this is not good to mux */
-					    "gpio40", /* CS2A_N */
-					    "gpio134"; /* CS0_N testpoint TP29 */
-					function = "ebi2cs";
-				};
-				mux1 {
-					pins =
-					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
-					    "gpio123", "gpio124", "gpio125", "gpio126",
-					    "gpio127", "gpio128", "gpio129", "gpio130",
-					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
-					    "gpio135", "gpio136", "gpio137", "gpio138",
-					    "gpio139", "gpio140", "gpio141", "gpio142",
-					    "gpio143", "gpio144", "gpio145", "gpio146",
-					    "gpio147", "gpio148", "gpio149", "gpio150",
-					    "gpio151", /* EBI2_OE_N */
-					    "gpio153", /* EBI2_ADV */
-					    "gpio157"; /* EBI2_WE_N */
-					function = "ebi2";
-				};
-			};
+&gsbi12_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+	status = "okay";
+};
 
-			/* Interrupt line for the KXSD9 accelerometer */
-			dragon_kxsd9_gpios: kxsd9 {
-				irq {
-					pins = "gpio57"; /* IRQ line */
-					bias-pull-up;
-				};
-			};
+&gsbi12_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+	status = "okay";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <33 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ak8975_gpios>;
+		vid-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+	};
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_bmp085_gpios>;
+		vddd-supply = <&pm8058_lvs0>; // 1.8V
+		vdda-supply = <&pm8058_l14>; // 2.85V
+	};
+	mpu3050@68 {
+		compatible = "invensense,mpu3050";
+		reg = <0x68>;
+		/*
+		 * GPIO17 is pulled high by a 10k
+		 * resistor to VLOGIC so needs to be
+		 * active low/falling edge.
+		 */
+		interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_mpu3050_gpios>;
+		vlogic-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
 
-			dragon_tma340_gpios: tma340 {
-				reset {
-					/* RESET line, TS_ATTN, WAKE_CTP */
-					pins = "gpio58";
-					function = "gpio";
-					drive-strength = <6>;
-					bias-disable;
-				};
-				irq {
-					pins = "gpio61"; /* IRQ line */
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
+		/*
+		 * The MPU-3050 acts as a hub for the
+		 * accelerometer.
+		 */
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			kxsd9@18 {
+				compatible = "kionix,kxsd9";
+				reg = <0x18>;
+				interrupt-parent = <&tlmm>;
+				interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_kxsd9_gpios>;
+				iovdd-supply = <&pm8058_lvs0>; // 1.8V
+				vdd-supply = <&pm8058_l14>; // 2.85V
 			};
 		};
+	};
+};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				keypad@148 {
-					linux,keymap = <
-					MATRIX_KEY(0, 0, KEY_MENU)
-					MATRIX_KEY(0, 2, KEY_1)
-					MATRIX_KEY(0, 3, KEY_4)
-					MATRIX_KEY(0, 4, KEY_7)
-					MATRIX_KEY(1, 0, KEY_UP)
-					MATRIX_KEY(1, 1, KEY_LEFT)
-					MATRIX_KEY(1, 2, KEY_DOWN)
-					MATRIX_KEY(1, 3, KEY_5)
-					MATRIX_KEY(1, 3, KEY_8)
-					MATRIX_KEY(2, 0, KEY_HOME)
-					MATRIX_KEY(2, 1, KEY_REPLY)
-					MATRIX_KEY(2, 2, KEY_2)
-					MATRIX_KEY(2, 3, KEY_6)
-					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
-					MATRIX_KEY(3, 1, KEY_RIGHT)
-					MATRIX_KEY(3, 2, KEY_3)
-					MATRIX_KEY(3, 3, KEY_9)
-					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
-					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
-					MATRIX_KEY(4, 1, KEY_BACK)
-					MATRIX_KEY(4, 2, KEY_CAMERA)
-					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
-					>;
-					keypad,num-rows = <6>;
-					keypad,num-columns = <5>;
-				};
-
-				gpio@150 {
-					dragon_ethernet_gpios: ethernet-state {
-						pinconf {
-							pins = "gpio7";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_bmp085_gpios: bmp085-state {
-						pinconf {
-							pins = "gpio16";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_mpu3050_gpios: mpu3050-state {
-						pinconf {
-							pins = "gpio17";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc3_gpios: sdcc3-state {
-						pinconf {
-							pins = "gpio22";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc5_gpios: sdcc5-state {
-						pinconf {
-							pins = "gpio26";
-							function = "normal";
-							input-enable;
-							bias-pull-up;
-							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_ak8975_gpios: ak8975-state {
-						pinconf {
-							pins = "gpio33";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_cm3605_gpios: cm3605-state {
-						/* Pin 34 connected to the proxy IRQ */
-						gpio34-pins {
-							pins = "gpio34";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-						/* Pin 35 connected to ASET */
-						gpio35-pins {
-							pins = "gpio35";
-							function = "normal";
-							output-high;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_veth_gpios: veth-state {
-						pinconf {
-							pins = "gpio40";
-							function = "normal";
-							bias-disable;
-							drive-push-pull;
-						};
-					};
-				};
-
-				mpps@50 {
-					dragon_cm3605_mpps: cm3605-mpps-state {
-						mpp5 {
-							pins = "mpp5";
-							function = "analog";
-							input-enable;
-							bias-high-impedance;
-							/* Let's use channel 5 */
-							qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-				};
-
-				xoadc@197 {
-					/* Reference voltage 2.2 V */
-					xoadc-ref-supply = <&pm8058_l18>;
-
-					/* Board-specific channels */
-					mpp5@5 {
-						/* Connected to AOUT of ALS sensor */
-						reg = <0x00 0x05>;
-					};
-					mpp6@6 {
-						/* Connected to test point TP43 */
-						reg = <0x00 0x06>;
-					};
-					mpp7@7 {
-						/* Connected to battery thermistor */
-						reg = <0x00 0x07>;
-					};
-					mpp8@8 {
-						/* Connected to battery ID detector */
-						reg = <0x00 0x08>;
-					};
-					mpp9@9 {
-						/* Connected to XO thermistor */
-						reg = <0x00 0x09>;
-					};
-				};
-
-				led@48 {
-					/*
-					 * The keypad LED @0x48 is routed to
-					 * the sensor board where it is
-					 * connected to an infrared LED
-					 * SFH4650 (60mW, @850nm) next to the
-					 * ambient light and proximity sensor
-					 * Capella Microsystems CM3605.
-					 */
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					label = "pm8058:infrared:proximitysensor";
-					default-state = "off";
-					linux,default-trigger = "cm3605";
-				};
-				led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					label = "pm8058:red";
-					color = <LED_COLOR_ID_RED>;
-					default-state = "off";
-				};
-				led@132 {
-					/*
-					 * This is actually green too on my
-					 * board, but documented as yellow.
-					 */
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					label = "pm8058:yellow";
-					color = <LED_COLOR_ID_YELLOW>;
-					default-state = "off";
-					linux,default-trigger = "mmc0";
-				};
-				led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					label = "pm8058:green";
-					function = LED_FUNCTION_HEARTBEAT;
-					color = <LED_COLOR_ID_GREEN>;
-					default-state = "on";
-					linux,default-trigger = "heartbeat";
-				};
-			};
+&pm8058_gpio {
+	dragon_ethernet_gpios: ethernet-state {
+		pinconf {
+			pins = "gpio7";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_bmp085_gpios: bmp085-state {
+		pinconf {
+			pins = "gpio16";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_mpu3050_gpios: mpu3050-state {
+		pinconf {
+			pins = "gpio17";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc3_gpios: sdcc3-state {
+		pinconf {
+			pins = "gpio22";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc5_gpios: sdcc5-state {
+		pinconf {
+			pins = "gpio26";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_ak8975_gpios: ak8975-state {
+		pinconf {
+			pins = "gpio33";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_cm3605_gpios: cm3605-state {
+		/* Pin 34 connected to the proxy IRQ */
+		gpio34-pins {
+			pins = "gpio34";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+		/* Pin 35 connected to ASET */
+		gpio35-pins {
+			pins = "gpio35";
+			function = "normal";
+			output-high;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_veth_gpios: veth-state {
+		pinconf {
+			pins = "gpio40";
+			function = "normal";
+			bias-disable;
+			drive-push-pull;
 		};
+	};
+};
 
-		gsbi@16200000 {
-			qcom,mode = <GSBI_PROT_I2C>;
-			status = "okay";
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_MENU)
+		MATRIX_KEY(0, 2, KEY_1)
+		MATRIX_KEY(0, 3, KEY_4)
+		MATRIX_KEY(0, 4, KEY_7)
+		MATRIX_KEY(1, 0, KEY_UP)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_5)
+		MATRIX_KEY(1, 3, KEY_8)
+		MATRIX_KEY(2, 0, KEY_HOME)
+		MATRIX_KEY(2, 1, KEY_REPLY)
+		MATRIX_KEY(2, 2, KEY_2)
+		MATRIX_KEY(2, 3, KEY_6)
+		MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(3, 1, KEY_RIGHT)
+		MATRIX_KEY(3, 2, KEY_3)
+		MATRIX_KEY(3, 3, KEY_9)
+		MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+		MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(4, 1, KEY_BACK)
+		MATRIX_KEY(4, 2, KEY_CAMERA)
+		MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+	>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
 
-			gsbi3_i2c: i2c@16280000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
-				status = "okay";
-
-				touchscreen@24 {
-					compatible = "cypress,cy8ctma340";
-					reg = <0x24>;
-					/* Certainly we can do at least 400 kHz */
-					clock-frequency = <400000>;
-					/* IRQ on GPIO61 called /CTP_INT */
-					interrupt-parent = <&tlmm>;
-					interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
-					/*
-					 * The I2C bus is using a PCA9306 level translator from L16A
-					 * to L2B so these two voltages are needed and L16A is
-					 * kind of the IO voltage, however L16Aisn't really fed to
-					 * the TMA340, which relies entirely on L2B (PM8901 L2).
-					 */
-					vcpin-supply = <&pm8058_l16>;
-					vdd-supply = <&pm8901_l2>;
-					/* GPIO58, called WAKE_CTP */
-					reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-					touchscreen-size-x = <480>;
-					touchscreen-size-y = <800>;
-					active-interval-ms = <0>;
-					touch-timeout-ms = <255>;
-					lowpower-interval-ms = <10>;
-					bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_tma340_gpios>;
-				};
-			};
+&pm8058_led48 {
+	/*
+	 * The keypad LED @0x48 is routed to
+	 * the sensor board where it is
+	 * connected to an infrared LED
+	 * SFH4650 (60mW, @850nm) next to the
+	 * ambient light and proximity sensor
+	 * Capella Microsystems CM3605.
+	 */
+	label = "pm8058:infrared:proximitysensor";
+	default-state = "off";
+	linux,default-trigger = "cm3605";
+	status = "okay";
+};
+
+&pm8058_led131 {
+	label = "pm8058:red";
+	color = <LED_COLOR_ID_RED>;
+	default-state = "off";
+	status = "okay";
+};
+
+&pm8058_led132 {
+	/*
+	 * This is actually green too on my
+	 * board, but documented as yellow.
+	 */
+	label = "pm8058:yellow";
+	color = <LED_COLOR_ID_YELLOW>;
+	default-state = "off";
+	linux,default-trigger = "mmc0";
+	status = "okay";
+};
+
+&pm8058_led133 {
+	label = "pm8058:green";
+	function = LED_FUNCTION_HEARTBEAT;
+	color = <LED_COLOR_ID_GREEN>;
+	default-state = "on";
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pm8058_mpps {
+	dragon_cm3605_mpps: cm3605-mpps-state {
+		mpp5 {
+			pins = "mpp5";
+			function = "analog";
+			input-enable;
+			bias-high-impedance;
+			/* Let's use channel 5 */
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+			power-source = <PM8058_GPIO_S3>;
 		};
+	};
+};
 
-		gsbi@19800000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&rpm {
+	/*
+	 * Set up of the PMIC RPM regulators for this board
+	 * PM8901 supplies "preliminary regulators" whatever
+	 * that means
+	 */
+	pm8901-regulators {
+		vdd_l0-supply = <&pm8901_s4>;
+		vdd_l1-supply = <&vph>;
+		vdd_l2-supply = <&vph>;
+		vdd_l3-supply = <&vph>;
+		vdd_l4-supply = <&vph>;
+		vdd_l5-supply = <&vph>;
+		vdd_l6-supply = <&vph>;
+		/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		lvs0_in-supply = <&pm8058_s3>;
+		lvs1_in-supply = <&pm8901_s4>;
+		lvs2_in-supply = <&pm8058_l0>;
+		lvs3_in-supply = <&pm8058_s2>;
+		mvs_in-supply = <&pm8058_s3>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l2 {
+			/* TMA340 requires strictly 3.3V */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
 
-			i2c@19880000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
-
-				eeprom@52 {
-					/* A 16KiB Platform ID EEPROM on the CPU carrier board */
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					vcc-supply = <&pm8058_s3>;
-					pagesize = <64>;
-				};
-				wm8903: wm8903@1a {
-					/* This Woolfson Micro device has an unrouted interrupt line */
-					compatible = "wlf,wm8903";
-					reg = <0x1a>;
-
-					AVDD-supply = <&pm8058_l16>;
-					CPVDD-supply = <&pm8058_l16>;
-					DBVDD-supply = <&pm8058_s3>;
-					DCVDD-supply = <&pm8058_l0>;
-
-					gpio-controller;
-					#gpio-cells = <2>;
-
-					micdet-cfg = <0>;
-					micdet-delay = <100>;
-					gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-				};
-			};
+		/* s0 and s1 are SAW regulators controlled over SPM */
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
 		};
 
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		/* LVS0 thru 3 and mvs are just switches */
+		lvs0 {
+			regulator-always-on;
+		};
+		lvs1 { };
+		lvs2 { };
+		lvs3 { };
+		mvs { };
 
-			serial@19c40000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
-			};
+	};
 
-			i2c@19c80000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
-
-				ak8975@c {
-					compatible = "asahi-kasei,ak8975";
-					reg = <0x0c>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <33 IRQ_TYPE_EDGE_RISING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_ak8975_gpios>;
-					vid-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-				};
-				bmp085@77 {
-					compatible = "bosch,bmp085";
-					reg = <0x77>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_bmp085_gpios>;
-					vddd-supply = <&pm8058_lvs0>; // 1.8V
-					vdda-supply = <&pm8058_l14>; // 2.85V
-				};
-				mpu3050@68 {
-					compatible = "invensense,mpu3050";
-					reg = <0x68>;
-					/*
-					 * GPIO17 is pulled high by a 10k
-					 * resistor to VLOGIC so needs to be
-					 * active low/falling edge.
-					 */
-					interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_mpu3050_gpios>;
-					vlogic-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-
-					/*
-					 * The MPU-3050 acts as a hub for the
-					 * accelerometer.
-					 */
-					i2c-gate {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						kxsd9@18 {
-							compatible = "kionix,kxsd9";
-							reg = <0x18>;
-							interrupt-parent = <&tlmm>;
-							interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-							pinctrl-names = "default";
-							pinctrl-0 = <&dragon_kxsd9_gpios>;
-							iovdd-supply = <&pm8058_lvs0>; // 1.8V
-							vdd-supply = <&pm8058_l14>; // 2.85V
-						};
-					};
-				};
-			};
+	pm8058-regulators {
+		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+		vdd_l2_l11_l12-supply = <&vph>;
+		vdd_l3_l4_l5-supply = <&vph>;
+		vdd_l6_l7-supply = <&vph>;
+		vdd_l8-supply = <&vph>;
+		vdd_l9-supply = <&vph>;
+		vdd_l10-supply = <&vph>;
+		vdd_l13_l16-supply = <&pm8058_s4>;
+		vdd_l14_l15-supply = <&vph>;
+		vdd_l17_l18-supply = <&vph>;
+		vdd_l19_l20-supply = <&vph>;
+		vdd_l21-supply = <&pm8058_s3>;
+		vdd_l22-supply = <&pm8058_s3>;
+		vdd_l23_l24_l25-supply = <&pm8058_s3>;
+		vdd_s0-supply = <&vph>;
+		vdd_s1-supply = <&vph>;
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		vdd_ncp-supply = <&vph>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3600000>;
+			bias-pull-down;
+		};
+		l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3050000>;
+			bias-pull-down;
+		};
+		l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l10 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l11 {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			bias-pull-down;
+		};
+		l12 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+		l13 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			bias-pull-down;
+		};
+		l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l17 {
+			// 1.5V according to schematic
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l18 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
+		l19 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			bias-pull-down;
+		};
+		l20 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l21 {
+			// 1.1 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l22 {
+			// 1.2 V according to schematic
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+		l23 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l24 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l25 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
 		};
 
-		external-bus@1a100000 {
-			/* The EBI2 will instantiate first, then populate its children */
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_ebi2_pins>;
-
-			/*
-			 * An on-board SMSC LAN9221 chip for "debug ethernet",
-			 * which is actually just an ordinary ethernet on the
-			 * EBI2. This has a 25MHz chrystal next to it, so no
-			 * clocking is needed.
-			 */
-			ethernet@2,0 {
-				compatible = "smsc,lan9221", "smsc,lan9115";
-				reg = <2 0x0 0x100>;
-				/*
-				 * The second interrupt is the PME interrupt
-				 * for network wakeup, connected to the TLMM.
-				 */
-				interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
-						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
-				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-				vdd33a-supply = <&dragon_veth>;
-				vddvario-supply = <&dragon_vario>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_ethernet_gpios>;
-				phy-mode = "mii";
-				reg-io-width = <2>;
-				smsc,force-external-phy;
-				smsc,irq-push-pull;
-
-				/*
-				 * SLOW chipselect config
-				 * Delay 9 cycles (140ns@64MHz) between SMSC
-				 * LAN9221 Ethernet controller reads and writes
-				 * on CS2.
-				 */
-				qcom,xmem-recovery-cycles = <0>;
-				qcom,xmem-write-hold-cycles = <3>;
-				qcom,xmem-write-delta-cycles = <31>;
-				qcom,xmem-read-delta-cycles = <28>;
-				qcom,xmem-write-wait-cycles = <9>;
-				qcom,xmem-read-wait-cycles = <9>;
-			};
+		s0 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1325000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s1 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1250000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s2 {
+			// 1.3 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
 		};
 
-		rpm@104000 {
-			/*
-			 * Set up of the PMIC RPM regulators for this board
-			 * PM8901 supplies "preliminary regulators" whatever
-			 * that means
-			 */
-			pm8901-regulators {
-				vdd_l0-supply = <&pm8901_s4>;
-				vdd_l1-supply = <&vph>;
-				vdd_l2-supply = <&vph>;
-				vdd_l3-supply = <&vph>;
-				vdd_l4-supply = <&vph>;
-				vdd_l5-supply = <&vph>;
-				vdd_l6-supply = <&vph>;
-				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				lvs0_in-supply = <&pm8058_s3>;
-				lvs1_in-supply = <&pm8901_s4>;
-				lvs2_in-supply = <&pm8058_l0>;
-				lvs3_in-supply = <&pm8058_s2>;
-				mvs_in-supply = <&pm8058_s3>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l2 {
-					/* TMA340 requires strictly 3.3V */
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-
-				/* s0 and s1 are SAW regulators controlled over SPM */
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* LVS0 thru 3 and mvs are just switches */
-				lvs0 {
-					regulator-always-on;
-				};
-				lvs1 { };
-				lvs2 { };
-				lvs3 { };
-				mvs { };
+		/* LVS0 and LVS1 are just switches */
+		lvs0 {
+			bias-pull-down;
+		};
+		lvs1 {
+			bias-pull-down;
+		};
 
-			};
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
 
-			pm8058-regulators {
-				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
-				vdd_l2_l11_l12-supply = <&vph>;
-				vdd_l3_l4_l5-supply = <&vph>;
-				vdd_l6_l7-supply = <&vph>;
-				vdd_l8-supply = <&vph>;
-				vdd_l9-supply = <&vph>;
-				vdd_l10-supply = <&vph>;
-				vdd_l13_l16-supply = <&pm8058_s4>;
-				vdd_l14_l15-supply = <&vph>;
-				vdd_l17_l18-supply = <&vph>;
-				vdd_l19_l20-supply = <&vph>;
-				vdd_l21-supply = <&pm8058_s3>;
-				vdd_l22-supply = <&pm8058_s3>;
-				vdd_l23_l24_l25-supply = <&pm8058_s3>;
-				vdd_s0-supply = <&vph>;
-				vdd_s1-supply = <&vph>;
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				vdd_ncp-supply = <&vph>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
-				};
-				l7 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l8 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <3050000>;
-					bias-pull-down;
-				};
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l10 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l11 {
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					bias-pull-down;
-				};
-				l12 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-				l13 {
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					bias-pull-down;
-				};
-				l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-				l15 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l16 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l17 {
-					// 1.5V according to schematic
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l18 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-				l19 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					bias-pull-down;
-				};
-				l20 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l21 {
-					// 1.1 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l22 {
-					// 1.2 V according to schematic
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-				l23 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l24 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l25 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				s0 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1325000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s1 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1250000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s2 {
-					// 1.3 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				/* LVS0 and LVS1 are just switches */
-				lvs0 {
-					bias-pull-down;
-				};
-				lvs1 {
-					bias-pull-down;
-				};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
+/* Internal 3.69 GiB eMMC */
+&sdcc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc1_pins>;
+	vmmc-supply = <&pm8901_l5>;
+	vqmmc-supply = <&pm8901_lvs0>;
+	status = "okay";
+};
+
+/* External micro SD card, directly connected, pulled up to 2.85 V */
+&sdcc3 {
+	/* Enable SSBI GPIO 22 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+	cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	status = "okay";
+};
+
+/*
+ * Second external micro SD card, using two TXB104RGYR levelshifters
+ * to lift from 1.8 V to 2.85 V
+ */
+&sdcc5 {
+	/* Enable SSBI GPIO 26 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+	cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	vqmmc-supply = <&dragon_vio_txb>;
+	status = "okay";
+};
+
+&tlmm {
+	/* eMMC pins, all 8 data lines connected */
+	dragon_sdcc1_pins: sdcc1-state {
+		clk-pins {
+			pins = "gpio167"; /* SDC1 CLK */
+			function = "sdc1";
+			drive-strength = <16>;
+			bias-disable;
 		};
-		amba {
-			/* Internal 3.69 GiB eMMC */
-			mmc@12400000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc1_pins>;
-				vmmc-supply = <&pm8901_l5>;
-				vqmmc-supply = <&pm8901_lvs0>;
-			};
+		cmd-pins {
+			pins = "gpio168"; /* SDC1 CMD */
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC1 D0 to D7 */
+			pins = "gpio159", "gpio160", "gpio161", "gpio162",
+			     "gpio163", "gpio164", "gpio165", "gpio166";
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
 
-			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			mmc@12180000 {
-				status = "okay";
-				/* Enable SSBI GPIO 22 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
-				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-			};
+	/*
+	 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+	 * configuration.
+	 */
+	dragon_sdcc3_pins: sdcc3-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
 
-			/*
-			 * Second external micro SD card, using two TXB104RGYR levelshifters
-			 * to lift from 1.8 V to 2.85 V
-			 */
-			mmc@12200000 {
-				status = "okay";
-				/* Enable SSBI GPIO 26 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
-				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-				vqmmc-supply = <&dragon_vio_txb>;
-			};
+	/* Second SD card slot pins */
+	dragon_sdcc5_pins: sdcc5-state {
+		clk-pins {
+			pins = "gpio97"; /* SDC5 CLK */
+			function = "sdc5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "gpio95"; /* SDC5 CMD */
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC5 D0 to D3 */
+			pins = "gpio96", "gpio98", "gpio99", "gpio100";
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
 		};
 	};
+
+	dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
+		pins = "gpio43", "gpio44";
+		function = "gsbi3";
+		drive-strength = <8>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
+		pins = "gpio64", "gpio65";
+		function = "gsbi8";
+		drive-strength = <16>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
+		pins = "gpio115", "gpio116";
+		function = "gsbi12";
+		drive-strength = <16>;
+		/* These have external pull-up 4.7kOhm to 1.8V */
+		bias-disable;
+	};
+
+	/* Primary serial port uart 0 pins */
+	dragon_gsbi12_serial_pins: gsbi12-serial-state {
+		tx-pins {
+			pins = "gpio117";
+			function = "gsbi12";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		rx-pins {
+			pins = "gpio118";
+			function = "gsbi12";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_ebi2_pins: ebi2-state {
+		/*
+		 * Pins used by EBI2 on the Dragonboard, actually only
+		 * CS2 is used by a real peripheral. CS0 is just
+		 * routed to a test point.
+		 */
+		mux0-pins {
+			pins =
+			    /* "gpio39", CS1A_N this is not good to mux */
+			    "gpio40", /* CS2A_N */
+			    "gpio134"; /* CS0_N testpoint TP29 */
+			function = "ebi2cs";
+		};
+		mux1-pins {
+			pins =
+			    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+			    "gpio123", "gpio124", "gpio125", "gpio126",
+			    "gpio127", "gpio128", "gpio129", "gpio130",
+			    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+			    "gpio135", "gpio136", "gpio137", "gpio138",
+			    "gpio139", "gpio140", "gpio141", "gpio142",
+			    "gpio143", "gpio144", "gpio145", "gpio146",
+			    "gpio147", "gpio148", "gpio149", "gpio150",
+			    "gpio151", /* EBI2_OE_N */
+			    "gpio153", /* EBI2_ADV */
+			    "gpio157"; /* EBI2_WE_N */
+			function = "ebi2";
+		};
+	};
+
+	/* Interrupt line for the KXSD9 accelerometer */
+	dragon_kxsd9_gpios: kxsd9-state {
+		pins = "gpio57"; /* IRQ line */
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	dragon_tma340_gpios: tma340-state {
+		reset-pins {
+			/* RESET line, TS_ATTN, WAKE_CTP */
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-disable;
+		};
+		irq-pins {
+			pins = "gpio61"; /* IRQ line */
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&xoadc {
+	/* Reference voltage 2.2 V */
+	xoadc-ref-supply = <&pm8058_l18>;
+
+	/* Board-specific channels */
+	mpp5@5 {
+		/* Connected to AOUT of ALS sensor */
+		reg = <0x00 0x05>;
+	};
+	mpp6@6 {
+		/* Connected to test point TP43 */
+		reg = <0x00 0x06>;
+	};
+	mpp7@7 {
+		/* Connected to battery thermistor */
+		reg = <0x00 0x07>;
+	};
+	mpp8@8 {
+		/* Connected to battery ID detector */
+		reg = <0x00 0x08>;
+	};
+	mpp9@9 {
+		/* Connected to XO thermistor */
+		reg = <0x00 0x09>;
+	};
 };
diff --git a/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts b/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts
index fee278e32c..bf2fb0f70f 100644
--- a/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts
+++ b/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts
@@ -6,6 +6,7 @@
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
+	chassis-type = "tablet";
 
 	aliases {
 		serial0 = &gsbi7_serial;
@@ -30,7 +31,7 @@
 		};
 	};
 
-	ext_3p3v: regulator-fixed@1 {
+	ext_3p3v: regulator-ext-3p3v {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -57,302 +58,291 @@
 	};
 
 	soc {
-		rpm@108000 {
-			regulators {
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vin_lvs2-supply = <&pm8921_s1>;
-
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				vdd_ncp-supply = <&pm8921_l6>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				/* msm otg HSUSB_VDDCX */
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				/*
-				 * msm_sdcc.1-sdc-vdd_io
-				 * tabla2x-slim-CDC_VDDA_RX
-				 * tabla2x-slim-CDC_VDDA_TX
-				 * tabla2x-slim-CDC_VDD_CP
-				 * tabla2x-slim-VDDIO_CDC
-				 */
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-					regulator-always-on;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				/* mipi_dsi.1-dsi1_pll_vdda */
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* msm_otg-HSUSB_3p3 */
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				/* msm_otg-HSUSB_1p8 */
-				l4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/* msm_sdcc.1-sdc_vdd */
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				/* mipi_dsi.1-dsi1_avdd */
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-
-				/* pwm_power for backlight */
-				l17 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				/* camera, qdsp6 */
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/*
-				 * tabla2x-slim-CDC_VDDA_A_1P2V
-				 * tabla2x-slim-VDDD_CDC_D
-				 */
-				l25 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-				/*
-				 * mipi_dsi.1-dsi1_vddio
-				 * pil_riva-pll_vdd
-				 */
-				lvs7 {
-					bias-pull-down;
-				};
-			};
-		};
+		sram@2a03f000 {
+			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
 
-		mdp@5100000 {
-			status = "okay";
-			ports {
-				port@1 {
-					mdp_dsi1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
+				mode-normal = <0x77665501>;
+				mode-bootloader = <0x77665500>;
+				mode-recovery = <0x77665502>;
 			};
 		};
+	};
+};
 
-		dsi0: dsi@4700000 {
-			status = "okay";
-			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
-			vdd-supply = <&pm8921_l8>;
-			vddio-supply = <&pm8921_lvs7>;
-			avdd-supply = <&pm8921_l11>;
-
-			panel@0 {
-				reg = <0>;
-				compatible = "jdi,lt070me05000";
-
-				vddp-supply = <&pm8921_l17>;
-				iovcc-supply = <&pm8921_lvs7>;
-
-				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
-			ports {
-				port@0 {
-					dsi0_in: endpoint {
-						remote-endpoint = <&mdp_dsi1_out>;
-					};
-				};
-
-				port@1 {
-					dsi0_out: endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
+&dsi0 {
+	vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+	vdd-supply = <&pm8921_l8>;
+	vddio-supply = <&pm8921_lvs7>;
+	avdd-supply = <&pm8921_l11>;
+	status = "okay";
+
+	panel@0 {
+		reg = <0>;
+		compatible = "jdi,lt070me05000";
+
+		vddp-supply = <&pm8921_l17>;
+		iovcc-supply = <&pm8921_lvs7>;
+
+		enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+		dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
+	};
+};
+
+&dsi0_in {
+	remote-endpoint = <&mdp_dsi1_out>;
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+	status = "okay";
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	status = "okay";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+
+	bq27541@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	trackpad@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm_pinmux>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
 
-		dsi-phy@4700200 {
-			status = "okay";
-			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&mdp_dsi1_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&rpm {
+	regulators {
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vin_lvs2-supply = <&pm8921_s1>;
+
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		vdd_ncp-supply = <&pm8921_l6>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
-
-				trackpad@10 {
-					compatible = "elan,ekth3500";
-					reg = <0x10>;
-					interrupt-parent = <&tlmm_pinmux>;
-					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-				};
-			};
+		/* msm otg HSUSB_VDDCX */
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+			regulator-always-on;
+		};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+		};
 
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
+		/* msm_otg-HSUSB_3p3 */
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
 
-				bq27541@55 {
-					compatible = "ti,bq27541";
-					reg = <0x55>;
-				};
+		/* msm_otg-HSUSB_1p8 */
+		l4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
 
-			};
+		/* msm_sdcc.1-sdc_vdd */
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			bias-pull-down;
 		};
 
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
 
-			serial@16540000 {
-				status = "okay";
+		/* mipi_dsi.1-dsi1_avdd */
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
+		/* pwm_power for backlight */
+		l17 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
 		};
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-			};
+		/* camera, qdsp6 */
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		lvs1 {
+			bias-pull-down;
 		};
 
-		sram@2a03f000 {
-			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
-			reg = <0x2a03f000 0x1000>;
+		lvs4 {
+			bias-pull-down;
+		};
 
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
+		lvs5 {
+			bias-pull-down;
+		};
 
-				mode-normal = <0x77665501>;
-				mode-bootloader = <0x77665500>;
-				mode-recovery = <0x77665502>;
-			};
+		lvs6 {
+			bias-pull-down;
+		};
+		/*
+		 * mipi_dsi.1-dsi1_vddio
+		 * pil_riva-pll_vdd
+		 */
+		lvs7 {
+			bias-pull-down;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/dts/src/arm/qcom-apq8064-cm-qs600.dts b/dts/src/arm/qcom-apq8064-cm-qs600.dts
index 529629a0a9..d6ecfd8add 100644
--- a/dts/src/arm/qcom-apq8064-cm-qs600.dts
+++ b/dts/src/arm/qcom-apq8064-cm-qs600.dts
@@ -15,232 +15,216 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwrseq {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
 	};
 
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
-
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
+	/* on board fixed 3.3v supply */
+	v3p3_fixed: regulator-v3p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE V3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
 
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-			};
-		};
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
 
-				eeprom@50 {
-					compatible = "atmel,24c02";
-					reg = <0x50>;
-					pagesize = <32>;
-				};
-			};
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&pcie {
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&v3p3_fixed>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
+};
+
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		/* on board fixed 3.3v supply */
-		v3p3_fixed: v3p3 {
-			compatible = "regulator-fixed";
-			regulator-name = "PCIE V3P3";
-			regulator-min-microvolt = <3300000>;
+		l3 {
+			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
 		};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios-state {
-						pinconf {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
 		};
 
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&v3p3_fixed>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		lvs6 {
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&card_detect>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: mmc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				vqmmc-supply = <&v3p3_fixed>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&v3p3_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* WLAN */
+&sdcc4 {
+	status = "okay";
+	vmmc-supply = <&v3p3_fixed>;
+	vqmmc-supply = <&v3p3_fixed>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+};
+
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/dts/src/arm/qcom-apq8064-ifc6410.dts b/dts/src/arm/qcom-apq8064-ifc6410.dts
index a7f9021766..9630755052 100644
--- a/dts/src/arm/qcom-apq8064-ifc6410.dts
+++ b/dts/src/arm/qcom-apq8064-ifc6410.dts
@@ -22,23 +22,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwrseq {
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&notify_led>;
 
-		led@1 {
+		led-user1 {
 			label = "apq8064:green:user1";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
@@ -57,326 +46,314 @@
 		};
 	};
 
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+	};
 
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
+	ext_3p3v: regulator-ext-3p3v {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
 
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-			};
-		};
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-		ext_3p3v: regulator-fixed@1 {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "ext_3p3v";
-			regulator-type = "voltage";
-			startup-delay-us = <0>;
-			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
 
-		gsbi3: gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-			};
-		};
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
 
-		gsbi@16300000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			/* CAM I2C MIPI-CSI connector */
-			i2c@16380000 {
-				status = "okay";
-			};
-		};
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
+/* CAM I2C MIPI-CSI connector */
+&gsbi4_i2c {
+	status = "okay";
+};
 
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-		};
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+};
 
-		gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-			spi4: spi@1a280000 {
-				status = "okay";
-				num-cs = <1>;
-				cs-gpios = <&tlmm_pinmux 53 0>;
-			};
-		};
+&gsbi5_spi {
+	num-cs = <1>;
+	cs-gpios = <&tlmm_pinmux 53 0>;
+	status = "okay";
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+	status = "okay";
+};
 
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_UART_W_FC>;
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
 
-			serial@16540000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&hdmi {
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+	hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&hdmi_in {
+	remote-endpoint = <&mdp_dtv_out>;
+};
+
+&hdmi_out {
+	remote-endpoint = <&hdmi_con>;
+};
+
+&hdmi_phy {
+	status = "okay";
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdp_dtv_out {
+	remote-endpoint = <&hdmi_in>;
+};
+
+&pcie {
+	status = "okay";
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&ext_3p3v>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
+	notify_led: nled-state {
+		pinconf {
+			pins = "gpio18";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
+};
 
-		sata_phy0: phy@1b400000 {
-			status = "okay";
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		sata0: sata@29000000 {
-			status = "okay";
-			target-supply = <&pm8921_s4>;
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		l3 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
 		};
 
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&ext_3p3v>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios-state {
-						pinconf {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-
-					notify_led: nled-state {
-						pinconf {
-							pins = "gpio18";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
 
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&card_detect>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: mmc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&ext_3p3v>;
-				vqmmc-supply = <&pm8921_lvs1>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
 		};
 
-		hdmi-tx@4a00000 {
-			status = "okay";
+		lvs1 {
+			bias-pull-down;
+		};
 
-			core-vdda-supply = <&pm8921_hdmi_switch>;
+		lvs6 {
+			bias-pull-down;
+		};
+	};
+};
 
-			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+&sata_phy0 {
+	status = "okay";
+};
 
-			ports {
-				port@0 {
-					endpoint {
-						remote-endpoint = <&mdp_dtv_out>;
-					};
-				};
+&sata0 {
+	target-supply = <&pm8921_s4>;
+	status = "okay";
+};
 
-				port@1 {
-					endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
 
-		hdmi-phy@4a00400 {
-			status = "okay";
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-			core-vdda-supply = <&pm8921_hdmi_switch>;
-		};
+/* WLAN */
+&sdcc4 {
+	vmmc-supply = <&ext_3p3v>;
+	vqmmc-supply = <&pm8921_lvs1>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+	status = "okay";
+};
 
-		mdp@5100000 {
-			status = "okay";
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
 
-			ports {
-				port@3 {
-					endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-			};
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts b/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts
index c07c547475..9244512b74 100644
--- a/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -8,6 +8,7 @@
 / {
 	model = "Sony Xperia Z";
 	compatible = "sony,xperia-yuga", "qcom,apq8064";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &gsbi5_serial;
@@ -51,351 +52,338 @@
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi5_uart_pin_a>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio3", "gpio4", "gpio29", "gpio35";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		input-enable;
+		power-source = <2>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		qcom,pull-up-strength = <0>;
+	};
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs_1_3_6-supply = <&pm8921_s4>;
+		vin_lvs_4_5_7-supply = <&pm8921_s4>;
+		vin_ncp-supply = <&pm8921_l6>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_l24-supply = <&pm8921_s1>;
+		vin_l25-supply = <&pm8921_s1>;
+		vin_l27-supply = <&pm8921_s7>;
+		vin_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* PMOS LDO */
+		l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
 
-	soc {
-		pinctrl@800000 {
-			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
-				rx {
-					pins = "gpio52";
-					function = "gsbi5";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				tx {
-					pins = "gpio51";
-					function = "gsbi5";
-					drive-strength = <4>;
-					bias-disable;
-				};
-			};
-
-
-			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
-				pins = "gpio26";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-
-		rpm@108000 {
-			regulators {
-				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs_1_3_6-supply = <&pm8921_s4>;
-				vin_lvs_4_5_7-supply = <&pm8921_s4>;
-				vin_ncp-supply = <&pm8921_l6>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_l24-supply = <&pm8921_s1>;
-				vin_l25-supply = <&pm8921_s1>;
-				vin_l27-supply = <&pm8921_s7>;
-				vin_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s8 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-
-				/* PMOS LDO */
-				l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					bias-pull-down;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l10 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l17 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				l18 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l22 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				l27 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l29 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs2 {
-					bias-pull-down;
-				};
-
-				lvs3 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-
-				lvs7 {
-					bias-pull-down;
-				};
-
-				usb-switch {};
-
-				hdmi-switch {};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					gpio_keys_pin_a: gpio-keys-active-state {
-						pins = "gpio3", "gpio4", "gpio29", "gpio35";
-						function = "normal";
-
-						bias-pull-up;
-						drive-push-pull;
-						input-enable;
-						power-source = <2>;
-						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-						qcom,pull-up-strength = <0>;
-					};
-				};
-			};
-		};
-
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
 		};
 
-		gsbi@1a200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
 
-			serial@1a240000 {
-				status = "okay";
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi5_uart_pin_a>;
-			};
+		l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		amba {
-			sdcc1: mmc@12400000 {
-				status = "okay";
+		l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
 
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
 
-			sdcc3: mmc@12180000 {
-				status = "okay";
+		l17 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
 
-				vmmc-supply = <&pm8921_l6>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+		l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
-			};
+		l21 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
 		};
 
-		riva-pil@3204000 {
-			status = "okay";
+		l22 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		l29 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		lvs1 {
+			bias-pull-down;
+		};
+
+		lvs2 {
+			bias-pull-down;
+		};
+
+		lvs3 {
+			bias-pull-down;
+		};
+
+		lvs4 {
+			bias-pull-down;
+		};
+
+		lvs5 {
+			bias-pull-down;
+		};
+
+		lvs6 {
+			bias-pull-down;
+		};
+
+		lvs7 {
+			bias-pull-down;
+		};
+
+		usb-switch {};
+
+		hdmi-switch {};
+
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
 		};
 	};
 };
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+
+	status = "okay";
+};
+
+&tlmm_pinmux {
+	gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+		rx {
+			pins = "gpio52";
+			function = "gsbi5";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		tx {
+			pins = "gpio51";
+			function = "gsbi5";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+
+	sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+		pins = "gpio26";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi
index 942aa22783..0da9623ea0 100644
--- a/dts/src/arm/qcom-apq8064.dtsi
+++ b/dts/src/arm/qcom-apq8064.dtsi
@@ -672,7 +672,7 @@
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8821: pmic@1 {
+			pm8821: pmic {
 				compatible = "qcom,pm8821";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
@@ -693,12 +693,12 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <74 8>;
@@ -884,7 +884,7 @@
 			reg = <0x2011000 0x1000>;
 		};
 
-		rpm@108000 {
+		rpm: rpm@108000 {
 			compatible = "qcom,rpm-apq8064";
 			reg = <0x108000 0x1000>;
 			qcom,ipc = <&l2cc 0x8 2>;
@@ -1085,15 +1085,21 @@
 			ports-implemented = <0x1>;
 		};
 
-		/* Temporary fixed regulator */
-		sdcc1bam: dma-controller@12402000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
 		};
 
 		sdcc3bam: dma-controller@12182000{
@@ -1106,6 +1112,24 @@
 			qcom,ee = <0>;
 		};
 
+		sdcc4: mmc@121c0000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x121c0000 0x2000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdc4_gpios>;
+		};
+
 		sdcc4bam: dma-controller@121c2000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
@@ -1116,67 +1140,33 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc1_pins>;
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				no-1-8-v;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdcc1_pins>;
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
 
-			sdcc4: mmc@121c0000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x121c0000 0x2000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdc4_gpios>;
-			};
+		sdcc1bam: dma-controller@12402000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		tcsr: syscon@1a400000 {
@@ -1316,7 +1306,6 @@
 						<&dsi0_phy 1>;
 			syscon-sfpb = <&mmss_sfpb>;
 			phys = <&dsi0_phy>;
-			phy-names = "dsi";
 			status = "disabled";
 
 			ports {
@@ -1338,7 +1327,7 @@
 		};
 
 
-		dsi0_phy: dsi-phy@4700200 {
+		dsi0_phy: phy@4700200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -1470,6 +1459,8 @@
 
 			phys = <&hdmi_phy>;
 
+			status = "disabled";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1488,7 +1479,7 @@
 			};
 		};
 
-		hdmi_phy: hdmi-phy@4a00400 {
+		hdmi_phy: phy@4a00400 {
 			compatible = "qcom,hdmi-phy-8960";
 			reg = <0x4a00400 0x60>,
 			      <0x4a00500 0x100>;
@@ -1498,6 +1489,8 @@
 			clocks = <&mmcc HDMI_S_AHB_CLK>;
 			clock-names = "slave_iface";
 			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		mdp: mdp@5100000 {
@@ -1552,7 +1545,7 @@
 			};
 		};
 
-		riva: riva-pil@3204000 {
+		riva: riva-pil@3200800 {
 			compatible = "qcom,riva-pil";
 
 			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
@@ -1615,7 +1608,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git a/dts/src/arm/qcom-apq8074-dragonboard.dts b/dts/src/arm/qcom-apq8074-dragonboard.dts
index 91716298ec..1345df7cbd 100644
--- a/dts/src/arm/qcom-apq8074-dragonboard.dts
+++ b/dts/src/arm/qcom-apq8074-dragonboard.dts
@@ -35,30 +35,8 @@
 	};
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs2_phy>;
-	phy-select = <&tcsr 0xb000 1>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@b {
-			status = "okay";
-			v3p3-supply = <&pm8941_l24>;
-			v1p8-supply = <&pm8941_l6>;
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x63>;
-		};
-	};
-};
-
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -82,7 +60,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -272,34 +250,34 @@
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		cd {
+		cd-pins {
 			pins = "gpio62";
 			function = "gpio";
 			drive-strength = <2>;
@@ -307,3 +285,23 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs2_phy>;
+	phy-select = <&tcsr 0xb000 1>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs2_phy {
+	status = "okay";
+	v3p3-supply = <&pm8941_l24>;
+	v1p8-supply = <&pm8941_l6>;
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x63>;
+};
diff --git a/dts/src/arm/qcom-apq8084.dtsi b/dts/src/arm/qcom-apq8084.dtsi
index f2fb7c975a..fe30abfff9 100644
--- a/dts/src/arm/qcom-apq8084.dtsi
+++ b/dts/src/arm/qcom-apq8084.dtsi
@@ -72,7 +72,7 @@
 		};
 
 		L2: l2-cache {
-			compatible = "qcom,arch-cache";
+			compatible = "cache";
 			cache-level = <2>;
 			qcom,saw = <&saw_l2>;
 		};
@@ -258,12 +258,14 @@
 		};
 
 		tsens: thermal-sensor@fc4a8000 {
-			compatible = "qcom,msm8974-tsens";
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
 			reg = <0xfc4a9000 0x1000>, /* TM */
 			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 		timer@f9020000 {
@@ -394,7 +396,7 @@
 			#hwlock-cells = <1>;
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
@@ -474,7 +476,7 @@
 				compatible = "qcom,rpm-apq8084";
 				qcom,smd-channels = "rpm_requests";
 
-				pma8084-regulators {
+				regulators-0 {
 					compatible = "qcom,rpm-pma8084-regulators";
 
 					pma8084_s1: s1 {};
diff --git a/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts b/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts
index cf7da1ab17..1b27edce9d 100644
--- a/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts
@@ -9,7 +9,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ap120c-ac:green:power";
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -17,14 +17,14 @@
 			default-state = "on";
 		};
 
-		wlan {
+		led-wlan {
 			label = "ap120c-ac:green:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		support {
+		led-support {
 			label = "ap120c-ac:green:support";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/qcom-ipq4018-ap120c-ac.dts b/dts/src/arm/qcom-ipq4018-ap120c-ac.dts
index c4f89b712f..a707057c88 100644
--- a/dts/src/arm/qcom-ipq4018-ap120c-ac.dts
+++ b/dts/src/arm/qcom-ipq4018-ap120c-ac.dts
@@ -7,7 +7,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status: status {
+		status: led-status {
 			label = "ap120c-ac:blue:status";
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
@@ -15,7 +15,7 @@
 			default-state = "keep";
 		};
 
-		wlan2g {
+		led-wlan2g {
 			label = "ap120c-ac:green:wlan2g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
@@ -23,7 +23,7 @@
 			linux,default-trigger = "phy0tpt";
 		};
 
-		wlan5g {
+		led-wlan5g {
 			label = "ap120c-ac:red:wlan5g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_RED>;
diff --git a/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi b/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi
index af9a26fb5d..a5a6f3ebb2 100644
--- a/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi
+++ b/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi
@@ -6,7 +6,7 @@
 
 / {
 	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac";
+	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
 
 	keys {
 		compatible = "gpio-keys";
diff --git a/dts/src/arm/qcom-ipq4018-jalapeno.dts b/dts/src/arm/qcom-ipq4018-jalapeno.dts
index 3944126198..365fbac417 100644
--- a/dts/src/arm/qcom-ipq4018-jalapeno.dts
+++ b/dts/src/arm/qcom-ipq4018-jalapeno.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno";
+	compatible = "8dev,jalapeno", "qcom,ipq4018";
 };
 
 &tlmm {
diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi
index b23591110b..acb08dcf94 100644
--- a/dts/src/arm/qcom-ipq4019.dtsi
+++ b/dts/src/arm/qcom-ipq4019.dtsi
@@ -348,7 +348,7 @@
 		saw0: regulator@b089000 {
 			compatible = "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-                        regulator;
+			regulator;
 		};
 
 		saw1: regulator@b099000 {
diff --git a/dts/src/arm/qcom-ipq8064-rb3011.dts b/dts/src/arm/qcom-ipq8064-rb3011.dts
index 5a65cce250..f908889c4f 100644
--- a/dts/src/arm/qcom-ipq8064-rb3011.dts
+++ b/dts/src/arm/qcom-ipq8064-rb3011.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "MikroTik RB3011UiAS-RM";
-	compatible = "mikrotik,rb3011";
+	compatible = "mikrotik,rb3011", "qcom,ipq8064";
 
 	aliases {
 		serial0 = &gsbi7_serial;
@@ -264,8 +264,7 @@
 &nand {
 	status = "okay";
 
-	nandcs@0 {
-		compatible = "qcom,nandcs";
+	nand@0 {
 		reg = <0>;
 
 		nand-ecc-strength = <4>;
diff --git a/dts/src/arm/qcom-ipq8064.dtsi b/dts/src/arm/qcom-ipq8064.dtsi
index 90c08b5168..7e784b0995 100644
--- a/dts/src/arm/qcom-ipq8064.dtsi
+++ b/dts/src/arm/qcom-ipq8064.dtsi
@@ -513,8 +513,8 @@
 
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-ipq8064", "syscon";
-			clocks = <&pxo_board>, <&cxo_board>;
-			clock-names = "pxo", "cxo";
+			clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+			clock-names = "pxo", "cxo", "pll4";
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -728,7 +728,6 @@
 				status = "disabled";
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -748,7 +747,6 @@
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -756,7 +754,6 @@
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				mmc-ddr-1_8v;
 				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 				dma-names = "tx", "rx";
diff --git a/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
index 0827de5426..a8304769b5 100644
--- a/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for mangOH Green Board with WP8548 Module
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
@@ -82,8 +45,8 @@
 	 * - 42: IOT0_GPIO1 and SD Card Detect
 	 */
 
-	gpioext1_pins: gpioext1_pins {
-		pins {
+	gpioext1_pins: gpioext1-state {
+		gpioext1-pins {
 			pins = "gpio2";
 			function = "gpio";
 			input-enable;
@@ -91,8 +54,8 @@
 		};
 	};
 
-	sdc_cd_pins: sdc_cd_pins {
-		pins {
+	sdc_cd_pins: sdc-cd-state {
+		sdc-cd-pins {
 			pins = "gpio42";
 			function = "gpio";
 			drive-strength = <2>;
@@ -153,7 +116,7 @@
 			#size-cells = <0>;
 			reg = <4>;
 
-			gpioext0: gpio@3e {
+			gpioext0: pinctrl@3e {
 				/* GPIO Expander 0 Mapping :
 				 * - 0: ARDUINO_RESET_Level shift
 				 * - 1: BattChrgr_PG_N
@@ -179,7 +142,7 @@
 				interrupt-parent = <&gpioext1>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -191,7 +154,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			gpioext1: gpio@3f {
+			gpioext1: pinctrl@3f {
 				/* GPIO Expander 1 Mapping :
 				 * - 0: GPIOEXP_INT1
 				 * - 1: Battery detect
@@ -220,7 +183,7 @@
 				interrupt-parent = <&msmgpio>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -232,7 +195,7 @@
 			#size-cells = <0>;
 			reg = <6>;
 
-			gpioext2: gpio@70 {
+			gpioext2: pinctrl@70 {
 				/* GPIO Expander 2 Mapping :
 				 * - 0: USB_HUB_INTn
 				 * - 1: HUB_CONNECT
@@ -258,7 +221,7 @@
 				interrupt-parent = <&gpioext1>;
 				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
diff --git a/dts/src/arm/qcom-mdm9615-wp8548.dtsi b/dts/src/arm/qcom-mdm9615-wp8548.dtsi
index 49de1821ac..92c8003dac 100644
--- a/dts/src/arm/qcom-mdm9615-wp8548.dtsi
+++ b/dts/src/arm/qcom-mdm9615-wp8548.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for Sierra Wireless WP8548 Module
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "qcom-mdm9615.dtsi"
@@ -59,8 +22,8 @@
 	pinctrl-0 = <&reset_out_pins>;
 	pinctrl-names = "default";
 
-	gsbi3_pins: gsbi3_pins {
-		mux {
+	gsbi3_pins: gsbi3-state {
+		gsbi3-pins {
 			pins = "gpio8", "gpio9", "gpio10", "gpio11";
 			function = "gsbi3";
 			drive-strength = <8>;
@@ -68,8 +31,8 @@
 		};
 	};
 
-	gsbi4_pins: gsbi4_pins {
-		mux {
+	gsbi4_pins: gsbi4-state {
+		gsbi4-pins {
 			pins = "gpio12", "gpio13", "gpio14", "gpio15";
 			function = "gsbi4";
 			drive-strength = <8>;
@@ -77,15 +40,15 @@
 		};
 	};
 
-	gsbi5_i2c_pins: gsbi5_i2c_pins {
-		pin16 {
+	gsbi5_i2c_pins: gsbi5-i2c-state {
+		sda-pins {
 			pins = "gpio16";
 			function = "gsbi5_i2c";
 			drive-strength = <8>;
 			bias-disable;
 		};
 
-		pin17 {
+		scl-pins {
 			pins = "gpio17";
 			function = "gsbi5_i2c";
 			drive-strength = <2>;
@@ -93,8 +56,8 @@
 		};
 	};
 
-	gsbi5_uart_pins: gsbi5_uart_pins {
-		mux {
+	gsbi5_uart_pins: gsbi5-uart-state {
+		gsbi5-uart-pins {
 			pins = "gpio18", "gpio19";
 			function = "gsbi5_uart";
 			drive-strength = <8>;
@@ -102,8 +65,8 @@
 		};
 	};
 
-	reset_out_pins: reset_out_pins {
-		pins {
+	reset_out_pins: reset-out-state {
+		reset-out-pins {
 			pins = "gpio66";
 			function = "gpio";
 			drive-strength = <2>;
diff --git a/dts/src/arm/qcom-mdm9615.dtsi b/dts/src/arm/qcom-mdm9615.dtsi
index b47c86412d..b0fe1d95d8 100644
--- a/dts/src/arm/qcom-mdm9615.dtsi
+++ b/dts/src/arm/qcom-mdm9615.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for Qualcomm MDM9615 SoC
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -64,6 +27,7 @@
 
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a5";
+			reg = <0>;
 			device_type = "cpu";
 			next-level-cache = <&L2>;
 		};
@@ -206,7 +170,6 @@
 				#size-cells = <0>;
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				spi-max-frequency = <24000000>;
 
 				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
 				clock-names = "core", "iface";
@@ -283,7 +246,7 @@
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8018", "qcom,pm8921";
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
@@ -351,51 +314,43 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12180000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC1_CLK>;
-				assigned-clock-rates = <400000>;
-			};
+		sdcc1: mmc@12180000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <48000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC1_CLK>;
+			assigned-clock-rates = <400000>;
+		};
 
-			sdcc2: mmc@12140000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12140000 0x2000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC2_CLK>;
-				assigned-clock-rates = <400000>;
-			};
+		sdcc2: mmc@12140000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12140000 0x2000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC2_CLK>;
+			assigned-clock-rates = <400000>;
 		};
 
 		tcsr: syscon@1a400000 {
diff --git a/dts/src/arm/qcom-msm8226-samsung-s3ve3g.dts b/dts/src/arm/qcom-msm8226-samsung-s3ve3g.dts
index 290e1df631..6a082ad441 100644
--- a/dts/src/arm/qcom-msm8226-samsung-s3ve3g.dts
+++ b/dts/src/arm/qcom-msm8226-samsung-s3ve3g.dts
@@ -8,6 +8,7 @@
 / {
 	model = "Samsung Galaxy S III Neo";
 	compatible = "samsung,s3ve3g", "qcom,msm8226";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart3;
diff --git a/dts/src/arm/qcom-msm8226.dtsi b/dts/src/arm/qcom-msm8226.dtsi
index cf2d569294..4cba25dad8 100644
--- a/dts/src/arm/qcom-msm8226.dtsi
+++ b/dts/src/arm/qcom-msm8226.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8974.h>
@@ -298,6 +299,33 @@
 			#size-cells = <0>;
 		};
 
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8226-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		usb: usb@f9a55000 {
 			compatible = "qcom,ci-hdrc";
 			reg = <0xf9a55000 0x200>,
@@ -344,6 +372,14 @@
 			#power-domain-cells = <1>;
 		};
 
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8226";
+			reg = <0xfd8c0000 0x6000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		tlmm: pinctrl@fd510000 {
 			compatible = "qcom,msm8226-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -354,49 +390,65 @@
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 
-			blsp1_i2c1_pins: blsp1-i2c1 {
+			blsp1_i2c1_pins: blsp1-i2c1-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_pins: blsp1-i2c2 {
+			blsp1_i2c2_pins: blsp1-i2c2-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_pins: blsp1-i2c3 {
+			blsp1_i2c3_pins: blsp1-i2c3-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c4_pins: blsp1-i2c4 {
+			blsp1_i2c4_pins: blsp1-i2c4-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c5_pins: blsp1-i2c5 {
+			blsp1_i2c5_pins: blsp1-i2c5-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
+			cci_default: cci-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c0";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_sleep: cci-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdhc1_default_state: sdhc1-default-state {
-				clk {
+				clk-pins {
 					pins = "sdc1_clk";
 					drive-strength = <10>;
 					bias-disable;
 				};
 
-				cmd-data {
+				cmd-data-pins {
 					pins = "sdc1_cmd", "sdc1_data";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -404,13 +456,13 @@
 			};
 
 			sdhc2_default_state: sdhc2-default-state {
-				clk {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <10>;
 					bias-disable;
 				};
 
-				cmd-data {
+				cmd-data-pins {
 					pins = "sdc2_cmd", "sdc2_data";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -418,21 +470,21 @@
 			};
 
 			sdhc3_default_state: sdhc3-default-state {
-				clk {
+				clk-pins {
 					pins = "gpio44";
 					function = "sdc3";
 					drive-strength = <8>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "gpio43";
 					function = "sdc3";
 					drive-strength = <8>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio39", "gpio40", "gpio41", "gpio42";
 					function = "sdc3";
 					drive-strength = <8>;
@@ -527,7 +579,7 @@
 			};
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
diff --git a/dts/src/arm/qcom-msm8660.dtsi b/dts/src/arm/qcom-msm8660.dtsi
index ddce7d64ba..86f76d0fef 100644
--- a/dts/src/arm/qcom-msm8660.dtsi
+++ b/dts/src/arm/qcom-msm8660.dtsi
@@ -316,7 +316,7 @@
 			};
 		};
 
-		external-bus@1a100000 {
+		ebi2: external-bus@1a100000 {
 			compatible = "qcom,msm8660-ebi2";
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -333,12 +333,12 @@
 			status = "disabled";
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8058: pmic@0 {
+			pm8058: pmic {
 				compatible = "qcom,pm8058";
 				interrupt-parent = <&tlmm>;
 				interrupts = <88 8>;
@@ -379,7 +379,7 @@
 					pull-up;
 				};
 
-				keypad@148 {
+				pm8058_keypad: keypad@148 {
 					compatible = "qcom,pm8058-keypad";
 					reg = <0x148>;
 					interrupt-parent = <&pm8058>;
@@ -444,6 +444,31 @@
 					compatible = "qcom,pm8058-vib";
 					reg = <0x4a>;
 				};
+
+				pm8058_led48: led@48 {
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					status = "disabled";
+				};
+
+				pm8058_led131: led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					status = "disabled";
+				};
+
+				pm8058_led132: led@132 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					status = "disabled";
+				};
+
+				pm8058_led133: led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					status = "disabled";
+				};
+
 			};
 		};
 
@@ -471,7 +496,7 @@
 				clock-names = "pxo";
 			};
 
-			pm8901-regulators {
+			regulators-0 {
 				compatible = "qcom,rpm-pm8901-regulators";
 
 				pm8901_l0: l0 {};
@@ -495,7 +520,7 @@
 				pm8901_mvs: mvs {};
 			};
 
-			pm8058-regulators {
+			regulators-1 {
 				compatible = "qcom,rpm-pm8058-regulators";
 
 				pm8058_l0: l0 {};
@@ -549,7 +574,6 @@
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x8000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -565,7 +589,6 @@
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12140000 0x8000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -580,7 +603,6 @@
 				status = "disabled";
 				reg = <0x12180000 0x8000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -596,7 +618,6 @@
 				status = "disabled";
 				reg = <0x121c0000 0x8000>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -611,7 +632,6 @@
 				status = "disabled";
 				reg = <0x12200000 0x8000>;
 				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
diff --git a/dts/src/arm/qcom-msm8960-cdp.dts b/dts/src/arm/qcom-msm8960-cdp.dts
index 9157e3c4f4..8fa2befa62 100644
--- a/dts/src/arm/qcom-msm8960-cdp.dts
+++ b/dts/src/arm/qcom-msm8960-cdp.dts
@@ -18,7 +18,7 @@
 	regulators {
 		compatible = "simple-bus";
 
-		ext_l2: gpio-regulator@91 {
+		ext_l2: gpio-regulator {
 			compatible = "regulator-fixed";
 			regulator-name = "ext_l2";
 			gpio = <&msmgpio 91 0>;
@@ -42,7 +42,7 @@
 		compatible = "micrel,ks8851";
 		reg = <0>;
 		interrupt-parent = <&msmgpio>;
-		interrupts = <90 8>;
+		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <5400000>;
 		vdd-supply = <&ext_l2>;
 		vdd-io-supply = <&pm8921_lvs6>;
@@ -60,33 +60,32 @@
 };
 
 &msmgpio {
-	spi1_default: spi1_default {
-		 mux {
-			pins = "gpio6", "gpio7", "gpio9";
-			function = "gsbi1";
-		 };
-
-		 mosi {
+	spi1_default: spi1-default-state {
+		 mosi-pins {
 			pins = "gpio6";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
 
-		 miso {
+		 miso-pins {
 			pins = "gpio7";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
 
-		 cs {
+		 cs-pins {
 			pins = "gpio8";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 			output-low;
 		 };
 
-		 clk {
+		 clk-pins {
 			pins = "gpio9";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
diff --git a/dts/src/arm/qcom-msm8960.dtsi b/dts/src/arm/qcom-msm8960.dtsi
index c5740da375..7debf9db7c 100644
--- a/dts/src/arm/qcom-msm8960.dtsi
+++ b/dts/src/arm/qcom-msm8960.dtsi
@@ -17,7 +17,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <1 14 0x304>;
+		interrupts = <GIC_PPI 14 0x304>;
 
 		cpu@0 {
 			compatible = "qcom,krait";
@@ -52,7 +52,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 0x304>;
 		qcom,no-pc-write;
 	};
 
@@ -105,9 +105,9 @@
 		timer@200a000 {
 			compatible = "qcom,kpss-timer",
 				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
+			interrupts = <GIC_PPI 1 0x301>,
+				     <GIC_PPI 2 0x301>,
+				     <GIC_PPI 3 0x301>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>,
 					  <32768>;
@@ -119,7 +119,7 @@
 			gpio-controller;
 			gpio-ranges = <&msmgpio 0 0 152>;
 			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x800000 0x4000>;
@@ -247,15 +247,15 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&msmgpio>;
-				interrupts = <104 8>;
+				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;
@@ -265,7 +265,8 @@
 					compatible = "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
 					pull-up;
 				};
@@ -274,7 +275,8 @@
 					compatible = "qcom,pm8921-keypad";
 					reg = <0x148>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <74 1>, <75 1>;
+					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+						     <75 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15>;
 					scan-delay = <32>;
 					row-hold = <91500>;
@@ -283,7 +285,7 @@
 				rtc@11d {
 					compatible = "qcom,pm8921-rtc";
 					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
 				};
@@ -297,44 +299,36 @@
 			clock-names = "core";
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x8000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x8000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+		};
 
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x8000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x8000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
 		};
 
 		tcsr: syscon@1a400000 {
diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
index 6daceaa878..280e63e3eb 100644
--- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -9,6 +9,7 @@
 / {
 	model = "LGE MSM 8974 HAMMERHEAD";
 	compatible = "lge,hammerhead", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart1;
@@ -247,31 +248,6 @@
 	status = "okay";
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	extcon = <&charger>, <&usb_id>;
-	vbus-supply = <&usb_otg_vbus>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3";
@@ -344,7 +320,7 @@
 };
 
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -368,7 +344,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -573,43 +549,43 @@
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <6>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	mpu6515_pin: mpu6515 {
+	mpu6515_pin: mpu6515-state {
 		pins = "gpio73";
 		function = "gpio";
 		bias-disable;
 		input-enable;
 	};
 
-	touch_pin: touch {
-		int {
+	touch_pin: touch-state {
+		int-pins {
 			pins = "gpio5";
 			function = "gpio";
 
@@ -618,7 +594,7 @@
 			input-enable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio8";
 			function = "gpio";
 
@@ -627,27 +603,50 @@
 		};
 	};
 
-	panel_pin: panel {
+	panel_pin: panel-state {
 		pins = "gpio12";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	bt_pin: bt {
-		hostwake {
+	bt_pin: bt-state {
+		hostwake-pins {
 			pins = "gpio42";
 			function = "gpio";
 		};
 
-		devwake {
+		devwake-pins {
 			pins = "gpio62";
 			function = "gpio";
 		};
 
-		shutdown {
+		shutdown-pins {
 			pins = "gpio41";
 			function = "gpio";
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	extcon = <&charger>, <&usb_id>;
+	vbus-supply = <&usb_otg_vbus>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts
index 68d5626bf4..9f2ab5c122 100644
--- a/dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts
+++ b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -4,6 +4,7 @@
 / {
 	model = "Sony Xperia Z1 Compact";
 	compatible = "sony,xperia-amami", "qcom,msm8974";
+	chassis-type = "handset";
 };
 
 &smbb {
diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts
index ea6a941d8f..9028f17e5c 100644
--- a/dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts
+++ b/dts/src/arm/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -4,4 +4,5 @@
 / {
 	model = "Sony Xperia Z1";
 	compatible = "sony,xperia-honami", "qcom,msm8974";
+	chassis-type = "handset";
 };
diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi b/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi
index 5a70683d91..1b683690a1 100644
--- a/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -132,31 +132,6 @@
 	/* sii8334 MHL HDMI bridge */
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_coincell {
 	status = "okay";
 	qcom,rset-ohms = <2100>;
@@ -178,7 +153,7 @@
 
 	qcom,power-source = <1>;
 
-	rgb-led {
+	multi-led {
 		color = <LED_COLOR_ID_RGB>;
 		function = LED_FUNCTION_STATUS;
 
@@ -214,7 +189,7 @@
 };
 
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -238,7 +213,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -442,7 +417,7 @@
 };
 
 &tlmm {
-	ts_int_pin: touch-int {
+	ts_int_pin: touch-int-state {
 		pins = "gpio61";
 		function = "gpio";
 		drive-strength = <2>;
@@ -450,34 +425,34 @@
 		input-enable;
 	};
 
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc-on {
-		clk {
+	sdc2_on: sdc-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		cd {
+		cd-pins {
 			pins = "gpio62";
 			function = "gpio";
 			drive-strength = <2>;
@@ -485,3 +460,26 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi
index 7a9be0acf3..8d216a3c08 100644
--- a/dts/src/arm/qcom-msm8974.dtsi
+++ b/dts/src/arm/qcom-msm8974.dtsi
@@ -653,7 +653,7 @@
 			#size-cells = <0>;
 		};
 
-		otg: usb@f9a55000 {
+		usb: usb@f9a55000 {
 			compatible = "qcom,ci-hdrc";
 			reg = <0xf9a55000 0x200>,
 			      <0xf9a55200 0x200>;
@@ -679,7 +679,7 @@
 					#phy-cells = <0>;
 					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
 					reset-names = "phy", "por";
 					status = "disabled";
 				};
@@ -690,7 +690,7 @@
 					#phy-cells = <0>;
 					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
+					resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
 					reset-names = "phy", "por";
 					status = "disabled";
 				};
@@ -1056,7 +1056,7 @@
 			reg = <0xfc400000 0x4000>;
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
@@ -1116,7 +1116,7 @@
 		};
 
 		tsens: thermal-sensor@fc4a9000 {
-			compatible = "qcom,msm8974-tsens";
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
 			reg = <0xfc4a9000 0x1000>, /* TM */
 			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
@@ -1194,7 +1194,7 @@
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
 
-			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+			qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
 
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
@@ -1233,13 +1233,14 @@
 			};
 		};
 
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
 			reg = <0xfd484000 0x2000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr: syscon@fd4a0000 {
-			compatible = "syscon";
+			compatible = "qcom,tcsr-msm8974", "syscon";
 			reg = <0xfd4a0000 0x10000>;
 		};
 
@@ -1253,61 +1254,62 @@
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 
-			sdc1_off: sdc1-off {
-				clk {
+			sdc1_off: sdc1-off-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 			};
 
-			sdc2_off: sdc2-off {
-				clk {
+			sdc2_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				cd {
+				cd-pins {
 					pins = "gpio54";
+					function = "gpio";
 					bias-disable;
 					drive-strength = <2>;
 				};
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
-				rx {
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
 					pins = "gpio5";
 					function = "blsp_uart2";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				tx {
+				tx-pins {
 					pins = "gpio4";
 					function = "blsp_uart2";
 					drive-strength = <4>;
@@ -1315,15 +1317,15 @@
 				};
 			};
 
-			blsp2_uart1_default: blsp2-uart1-default {
-				tx-rts {
+			blsp2_uart1_default: blsp2-uart1-default-state {
+				tx-rts-pins {
 					pins = "gpio41", "gpio44";
 					function = "blsp_uart7";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx-cts {
+				rx-cts-pins {
 					pins = "gpio42", "gpio43";
 					function = "blsp_uart7";
 					drive-strength = <2>;
@@ -1331,22 +1333,22 @@
 				};
 			};
 
-			blsp2_uart1_sleep: blsp2-uart1-sleep {
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
 				pins = "gpio41", "gpio42", "gpio43", "gpio44";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_uart4_default: blsp2-uart4-default {
-				tx-rts {
+			blsp2_uart4_default: blsp2-uart4-default-state {
+				tx-rts-pins {
 					pins = "gpio53", "gpio56";
 					function = "blsp_uart10";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx-cts {
+				rx-cts-pins {
 					pins = "gpio54", "gpio55";
 					function = "blsp_uart10";
 					drive-strength = <2>;
@@ -1354,42 +1356,42 @@
 				};
 			};
 
-			blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c2_default: blsp1-i2c2-default {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
@@ -1400,14 +1402,14 @@
 
 			/* BLSP1_I2C5 info is missing */
 
-			blsp1_i2c6_default: blsp1-i2c6-default {
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
 				pins = "gpio29", "gpio30";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
 				pins = "gpio29", "gpio30";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
@@ -1417,14 +1419,14 @@
 
 			/* BLSP2_I2C1 info is missing */
 
-			blsp2_i2c2_default: blsp2-i2c2-default {
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
@@ -1435,48 +1437,80 @@
 
 			/* BLSP2_I2C4 info is missing */
 
-			blsp2_i2c5_default: blsp2-i2c5-default {
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c6_default: blsp2-i2c6-default {
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			spi8_default: spi8_default {
-				mosi {
+			cci_default: cci-default-state {
+				cci_i2c0_default: cci-i2c0-default-pins {
+					pins = "gpio19", "gpio20";
+					function = "cci_i2c0";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_default: cci-i2c1-default-pins {
+					pins = "gpio21", "gpio22";
+					function = "cci_i2c1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci_sleep: cci-sleep-state {
+				cci_i2c0_sleep: cci-i2c0-sleep-pins {
+					pins = "gpio19", "gpio20";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_sleep: cci-i2c1-sleep-pins {
+					pins = "gpio21", "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi8_default: spi8_default-state {
+				mosi-pins {
 					pins = "gpio45";
 					function = "blsp_spi8";
 				};
-				miso {
+				miso-pins {
 					pins = "gpio46";
 					function = "blsp_spi8";
 				};
-				cs {
+				cs-pins {
 					pins = "gpio47";
 					function = "blsp_spi8";
 				};
-				clk {
+				clk-pins {
 					pins = "gpio48";
 					function = "blsp_spi8";
 				};
@@ -1571,7 +1605,6 @@
 					      "core_mmss";
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi-phy";
 
 				status = "disabled";
 
@@ -1597,7 +1630,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@fd922a00 {
+			dsi0_phy: phy@fd922a00 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd922a00 0xd4>,
 				      <0xfd922b00 0x280>,
@@ -1616,6 +1649,40 @@
 			};
 		};
 
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8974-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gpu: adreno@fdb00000 {
 			compatible = "qcom,adreno-330.1", "qcom,adreno";
 			reg = <0xfdb00000 0x10000>;
@@ -1703,8 +1770,6 @@
 				qcom,ipc = <&apcs 8 8>;
 				qcom,smd-edge = <1>;
 				label = "lpass";
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 		};
 
@@ -1719,13 +1784,6 @@
 		};
 	};
 
-	tcsr_mutex: tcsr-mutex {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_block 0 0x80>;
-
-		#hwlock-cells = <1>;
-	};
-
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
diff --git a/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts
index ff6e006676..f531d2679f 100644
--- a/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts
+++ b/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts
@@ -8,7 +8,8 @@
 
 / {
 	model = "Fairphone 2";
-	compatible = "fairphone,fp2", "qcom,msm8974";
+	compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		mmc0 = &sdhc_1;
@@ -85,31 +86,6 @@
 	};
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio1", "gpio2", "gpio5";
@@ -190,7 +166,7 @@
 };
 
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -209,7 +185,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -408,36 +384,36 @@
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	wcnss_pin_a: wcnss-pin-active {
-		wlan {
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
 			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
 			function = "wlan";
 
@@ -445,7 +421,7 @@
 			bias-pull-down;
 		};
 
-		bt {
+		bt-pins {
 			pins = "gpio35", "gpio43", "gpio44";
 			function = "bt";
 
@@ -453,7 +429,7 @@
 			bias-pull-down;
 		};
 
-		fm {
+		fm-pins {
 			pins = "gpio41", "gpio42";
 			function = "fm";
 
@@ -462,3 +438,26 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/dts/src/arm/qcom-msm8974pro-oneplus-bacon.dts b/dts/src/arm/qcom-msm8974pro-oneplus-bacon.dts
new file mode 100644
index 0000000000..b5606623f9
--- /dev/null
+++ b/dts/src/arm/qcom-msm8974pro-oneplus-bacon.dts
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "OnePlus One";
+	compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+	qcom,msm-id = <194 0x10000>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		power-supplies = <&bq24196_charger>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	rmi4-i2c-dev@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		syna,startup-delay-ms = <100>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			/*
+			 * Touchscreen size is 2040x1080, y-values between
+			 * 1920-2040 are used for touchkey (menu, home & back).
+			 * For now clip it off so we don't get touch events
+			 * outside of the display area.
+			 */
+			syna,clip-y-high = <1920>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq24196_charger: charger@6b {
+		compatible = "ti,bq24196";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+		omit-battery-class;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	compatible = "qcom,gcc-msm8974pro-ac";
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <800>;
+	qcom,vset-millivolts = <3200>;
+
+	status = "okay";
+};
+
+&pronto {
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	touch_default_state: touch-default-state {
+		int-pins {
+			pins = "gpio61";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			input-enable;
+		};
+
+		reset-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/dts/src/arm/qcom-msm8974pro-samsung-klte.dts b/dts/src/arm/qcom-msm8974pro-samsung-klte.dts
index 983e10c3d8..b9698ffb66 100644
--- a/dts/src/arm/qcom-msm8974pro-samsung-klte.dts
+++ b/dts/src/arm/qcom-msm8974pro-samsung-klte.dts
@@ -7,7 +7,8 @@
 
 / {
 	model = "Samsung Galaxy S5";
-	compatible = "samsung,klte", "qcom,msm8974";
+	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart1;
@@ -375,28 +376,6 @@
 	status = "okay";
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pma8084_l6>;
-			v3p3-supply = <&pma8084_l24>;
-
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pma8084_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3", "gpio5";
@@ -470,7 +449,7 @@
 };
 
 &rpm_requests {
-	pma8084-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pma8084-regulators";
 
 		pma8084_s1: s1 {
@@ -706,57 +685,57 @@
 
 &tlmm {
 	/* This seems suspicious, but somebody with this device should look into it. */
-	blsp2_uart2_pins_active: blsp2-uart2-pins-active {
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
 		pins = "gpio45", "gpio46", "gpio47", "gpio48";
 		function = "blsp_uart8";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
 		pins = "gpio45", "gpio46", "gpio47", "gpio48";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	bt_pins: bt-pins {
-		hostwake {
+	bt_pins: bt-pins-state {
+		hostwake-pins {
 			pins = "gpio75";
 			function = "gpio";
 			drive-strength = <16>;
 			input-enable;
 		};
 
-		devwake {
+		devwake-pins {
 			pins = "gpio91";
 			function = "gpio";
 			drive-strength = <2>;
 		};
 	};
 
-	sdc1_on: sdhc1-on {
-		clk {
+	sdc1_on: sdhc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <4>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <4>;
 			bias-pull-up;
 		};
 	};
 
-	sdc3_on: sdc3-on {
+	sdc3_on: sdc3-on-state {
 		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
 		function = "sdc3";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	sdhc3_cd_pin: sdc3-cd-on {
+	sdhc3_cd_pin: sdc3-cd-on-state {
 		pins = "gpio62";
 		function = "gpio";
 
@@ -764,52 +743,72 @@
 		bias-disable;
 	};
 
-	sdc2_on: sdhc2-on {
-		clk {
+	sdc2_on: sdhc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <6>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	i2c_touchkey_pins: i2c-touchkey {
+	i2c_touchkey_pins: i2c-touchkey-state {
 		pins = "gpio95", "gpio96";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	i2c_led_gpioex_pins: i2c-led-gpioex {
+	i2c_led_gpioex_pins: i2c-led-gpioex-state {
 		pins = "gpio120", "gpio121";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
 	};
 
-	gpioex_pin: gpioex {
+	gpioex_pin: gpioex-state {
 		pins = "gpio145";
 		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 
-	wifi_pin: wifi {
+	wifi_pin: wifi-state {
 		pins = "gpio92";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
 	};
 
-	panel_te_pin: panel {
+	panel_te_pin: panel-state {
 		pins = "gpio12";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pma8084_l6>;
+	v3p3-supply = <&pma8084_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 3f45f5c5d3..3b1cc39f22 100644
--- a/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -8,7 +8,8 @@
 
 / {
 	model = "Sony Xperia Z2 Tablet";
-	compatible = "sony,xperia-castor", "qcom,msm8974";
+	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "tablet";
 
 	aliases {
 		serial0 = &blsp1_uart2;
@@ -212,31 +213,6 @@
 	};
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_coincell {
 	status = "okay";
 
@@ -294,7 +270,7 @@
 
 	qcom,power-source = <1>;
 
-	rgb-led {
+	multi-led {
 		color = <LED_COLOR_ID_RGB>;
 		function = LED_FUNCTION_STATUS;
 
@@ -319,7 +295,7 @@
 };
 
 &rpm_requests {
-	pm8941-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -548,41 +524,42 @@
 };
 
 &tlmm {
-	lcd_backlight_en_pin_a: lcd-backlight-vddio {
+	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
 		pins = "gpio69";
+		function = "gpio";
 		drive-strength = <10>;
 		output-low;
 		bias-disable;
 	};
 
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <6>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		cd {
+		cd-pins {
 			pins = "gpio62";
 			function = "gpio";
 			drive-strength = <2>;
@@ -590,22 +567,22 @@
 		};
 	};
 
-	sdc3_on: sdc3-on {
-		clk {
+	sdc3_on: sdc3-on-state {
+		clk-pins {
 			pins = "gpio40";
 			function = "sdc3";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "gpio39";
 			function = "sdc3";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "gpio35", "gpio36", "gpio37", "gpio38";
 			function = "sdc3";
 			drive-strength = <10>;
@@ -613,7 +590,7 @@
 		};
 	};
 
-	ts_int_pin: ts-int-pin {
+	ts_int_pin: ts-int-pin-state {
 		pins = "gpio86";
 		function = "gpio";
 		drive-strength = <2>;
@@ -621,7 +598,7 @@
 		input-enable;
 	};
 
-	bt_host_wake_pin: bt-host-wake {
+	bt_host_wake_pin: bt-host-wake-state {
 		pins = "gpio95";
 		function = "gpio";
 		drive-strength = <2>;
@@ -629,10 +606,33 @@
 		output-low;
 	};
 
-	bt_dev_wake_pin: bt-dev-wake {
+	bt_dev_wake_pin: bt-dev-wake-state {
 		pins = "gpio96";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/dts/src/arm/qcom-pm8226.dtsi b/dts/src/arm/qcom-pm8226.dtsi
index 9b7d9d04de..eb36d36624 100644
--- a/dts/src/arm/qcom-pm8226.dtsi
+++ b/dts/src/arm/qcom-pm8226.dtsi
@@ -90,6 +90,16 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pm8226_gpios: gpio@c000 {
+			compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_gpios 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pm8226_1: pm8226@1 {
@@ -98,7 +108,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8226_spmi_regulators: pm8226-regulators {
+		pm8226_spmi_regulators: regulators {
 			compatible = "qcom,pm8226-regulators";
 		};
 
diff --git a/dts/src/arm/qcom-pm8941.dtsi b/dts/src/arm/qcom-pm8941.dtsi
index 9cd49deb9f..cd957a1e7c 100644
--- a/dts/src/arm/qcom-pm8941.dtsi
+++ b/dts/src/arm/qcom-pm8941.dtsi
@@ -27,7 +27,7 @@
 			bias-pull-up;
 		};
 
-		usb_id: misc@900 {
+		usb_id: usb-detect@900 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x900>;
 			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
@@ -59,7 +59,7 @@
 			chg_otg: otg-vbus { };
 		};
 
-		pm8941_gpios: gpios@c000 {
+		pm8941_gpios: gpio@c000 {
 			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -101,37 +101,44 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			bat_temp {
-				reg = <VADC_LR_MUX1_BAT_THERM>;
+
+			adc-chan@6 {
+				reg = <VADC_VBAT_SNS>;
 			};
-			die_temp {
+
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_gnd {
+
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
-			vbat_sns {
-				reg = <VADC_VBAT_SNS>;
+
+			adc-chan@30 {
+				reg = <VADC_LR_MUX1_BAT_THERM>;
 			};
 		};
 
-		pm8941_iadc: iadc@3600 {
+		pm8941_iadc: adc@3600 {
 			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
 			reg = <0x3600>;
 			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
 
-		pm8941_coincell: coincell@2800 {
+		pm8941_coincell: charger@2800 {
 			compatible = "qcom,pm8941-coincell";
 			reg = <0x2800>;
 			status = "disabled";
diff --git a/dts/src/arm/qcom-pma8084.dtsi b/dts/src/arm/qcom-pma8084.dtsi
index e77602e9f9..2dd4c6aa71 100644
--- a/dts/src/arm/qcom-pma8084.dtsi
+++ b/dts/src/arm/qcom-pma8084.dtsi
@@ -27,7 +27,7 @@
 			bias-pull-up;
 		};
 
-		pma8084_gpios: gpios@c000 {
+		pma8084_gpios: gpio@c000 {
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -64,22 +64,27 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			die_temp {
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_buf_625mv {
+
+			adc-chan@c {
 				reg = <VADC_SPARE1>;
 			};
-			ref_gnd {
+
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
 		};
diff --git a/dts/src/arm/qcom-pmx65.dtsi b/dts/src/arm/qcom-pmx65.dtsi
index abf229a8b7..1c7fdf59c1 100644
--- a/dts/src/arm/qcom-pmx65.dtsi
+++ b/dts/src/arm/qcom-pmx65.dtsi
@@ -20,7 +20,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pmx65_gpios: pinctrl@8800 {
+		pmx65_gpios: gpio@8800 {
 			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
diff --git a/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts b/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts
index a4fa468a09..ac8b4626ae 100644
--- a/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts
+++ b/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts
@@ -282,40 +282,25 @@
 };
 
 &tlmm {
-	pcie_ep_clkreq_default: pcie_ep_clkreq_default {
-		mux {
-			pins = "gpio56";
-			function = "pcie_clkreq";
-		};
-		config {
-			pins = "gpio56";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	pcie_ep_perst_default: pcie_ep_perst_default {
-		mux {
-			pins = "gpio57";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio57";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
-	pcie_ep_wake_default: pcie_ep_wake_default {
-		mux {
-			pins = "gpio53";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio53";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
 
diff --git a/dts/src/arm/qcom-sdx55.dtsi b/dts/src/arm/qcom-sdx55.dtsi
index c72540223f..f1c0dab409 100644
--- a/dts/src/arm/qcom-sdx55.dtsi
+++ b/dts/src/arm/qcom-sdx55.dtsi
@@ -559,6 +559,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
 		};
 
 		sram@1468f000 {
diff --git a/dts/src/arm/qcom-sdx65.dtsi b/dts/src/arm/qcom-sdx65.dtsi
index 4cd405db55..b073e0c63d 100644
--- a/dts/src/arm/qcom-sdx65.dtsi
+++ b/dts/src/arm/qcom-sdx65.dtsi
@@ -441,8 +441,8 @@
 			interrupt-controller;
 		};
 
-		imem@1468f000 {
-			compatible = "simple-mfd";
+		sram@1468f000 {
+			compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
 			reg = <0x1468f000 0x1000>;
 			ranges = <0x0 0x1468f000 0x1000>;
 			#address-cells = <1>;
diff --git a/dts/src/arm/r8a7742.dtsi b/dts/src/arm/r8a7742.dtsi
index 758a1bf02f..73be346001 100644
--- a/dts/src/arm/r8a7742.dtsi
+++ b/dts/src/arm/r8a7742.dtsi
@@ -1298,7 +1298,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi
index db171e3c62..111a6d2315 100644
--- a/dts/src/arm/r8a7790.dtsi
+++ b/dts/src/arm/r8a7790.dtsi
@@ -1252,7 +1252,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi
index d8f91d9f42..777b672b59 100644
--- a/dts/src/arm/r8a7791.dtsi
+++ b/dts/src/arm/r8a7791.dtsi
@@ -1365,7 +1365,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/dts/src/arm/r8a7793.dtsi b/dts/src/arm/r8a7793.dtsi
index 9ebe7bfaf0..3e0be1b589 100644
--- a/dts/src/arm/r8a7793.dtsi
+++ b/dts/src/arm/r8a7793.dtsi
@@ -1111,7 +1111,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/dts/src/arm/r9a06g032.dtsi b/dts/src/arm/r9a06g032.dtsi
index 563024c9a4..41e19c0986 100644
--- a/dts/src/arm/r9a06g032.dtsi
+++ b/dts/src/arm/r9a06g032.dtsi
@@ -199,7 +199,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
+			dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -212,7 +212,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
+			dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -225,7 +225,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
+			dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -238,7 +238,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
+			dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -251,7 +251,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
+			dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
diff --git a/dts/src/arm/sama7g5-pinfunc.h b/dts/src/arm/sama7g5-pinfunc.h
index 6e87f0d4b8..a67a156e26 100644
--- a/dts/src/arm/sama7g5-pinfunc.h
+++ b/dts/src/arm/sama7g5-pinfunc.h
@@ -673,7 +673,7 @@
 #define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
 #define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
 #define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
-#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
 #define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
 #define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
 #define PIN_PD9				105
diff --git a/dts/src/arm/sama7g5.dtsi b/dts/src/arm/sama7g5.dtsi
index 7bd8ae8e8d..ab131762ec 100644
--- a/dts/src/arm/sama7g5.dtsi
+++ b/dts/src/arm/sama7g5.dtsi
@@ -9,12 +9,15 @@
  *
  */
 
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Microchip SAMA7G5 family SoC";
@@ -34,6 +37,7 @@
 			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
@@ -72,6 +76,46 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	clocks {
 		slow_xtal: slow_xtal {
 			compatible = "fixed-clock";
@@ -108,6 +152,13 @@
 		ranges;
 	};
 
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -153,7 +204,7 @@
 			};
 		};
 
-		securam: securam@e0000000 {
+		securam: sram@e0000000 {
 			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
 			reg = <0xe0000000 0x4000>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
@@ -420,6 +471,9 @@
 			atmel,min-sample-rate-hz = <200000>;
 			atmel,max-sample-rate-hz = <20000000>;
 			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
 			status = "disabled";
 		};
 
@@ -888,6 +942,17 @@
 			reg = <0xe3804000 0x1000>;
 		};
 
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
 		gic: interrupt-controller@e8c11000 {
 			compatible = "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi
index 2459f3cd7d..6eda6fdc10 100644
--- a/dts/src/arm/socfpga.dtsi
+++ b/dts/src/arm/socfpga.dtsi
@@ -453,7 +453,6 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
 					};
 
 					sdmmc_clk_divided: sdmmc_clk_divided {
@@ -755,7 +754,7 @@
 			reg = <0xff800000 0x1000>;
 		};
 
-		mmc: dwmmc0@ff704000 {
+		mmc: mmc@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
 			interrupts = <0 139 4>;
@@ -765,6 +764,7 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x108 3>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi
index 4370e3cbbb..3b2a2c9c65 100644
--- a/dts/src/arm/socfpga_arria10.dtsi
+++ b/dts/src/arm/socfpga_arria10.dtsi
@@ -365,7 +365,6 @@
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&sdmmc_free_clk>;
 						clk-gate = <0xC8 5>;
-						clk-phase = <0 135>;
 					};
 
 					qspi_clk: qspi_clk {
@@ -656,7 +655,7 @@
 			arm,shared-override;
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -666,6 +665,7 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm/socfpga_arria10_mercury_aa1.dtsi b/dts/src/arm/socfpga_arria10_mercury_aa1.dtsi
index ad7cd14de6..41f865c8c0 100644
--- a/dts/src/arm/socfpga_arria10_mercury_aa1.dtsi
+++ b/dts/src/arm/socfpga_arria10_mercury_aa1.dtsi
@@ -73,6 +73,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/dts/src/arm/socfpga_arria10_socdk_nand.dts b/dts/src/arm/socfpga_arria10_socdk_nand.dts
index 9aa897b795..a662df319a 100644
--- a/dts/src/arm/socfpga_arria10_socdk_nand.dts
+++ b/dts/src/arm/socfpga_arria10_socdk_nand.dts
@@ -16,11 +16,11 @@
 
 		partition@0 {
 			label = "Boot and fpga data";
-			reg = <0x0 0x02000000>;
+			reg = <0x0 0x02500000>;
 		};
 		partition@1c00000 {
 			label = "Root Filesystem - JFFS2";
-			reg = <0x02000000 0x06000000>;
+			reg = <0x02500000 0x05500000>;
 		};
 	};
 };
diff --git a/dts/src/arm/socfpga_arria10_socdk_sdmmc.dts b/dts/src/arm/socfpga_arria10_socdk_sdmmc.dts
index 64dc0799f3..d3969367f4 100644
--- a/dts/src/arm/socfpga_arria10_socdk_sdmmc.dts
+++ b/dts/src/arm/socfpga_arria10_socdk_sdmmc.dts
@@ -12,6 +12,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &eccmgr {
diff --git a/dts/src/arm/socfpga_arria5.dtsi b/dts/src/arm/socfpga_arria5.dtsi
index 22dbf07afc..40fecde65c 100644
--- a/dts/src/arm/socfpga_arria5.dtsi
+++ b/dts/src/arm/socfpga_arria5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/dts/src/arm/socfpga_arria5_socdk.dts b/dts/src/arm/socfpga_arria5_socdk.dts
index 7f5458d8fc..c48385702a 100644
--- a/dts/src/arm/socfpga_arria5_socdk.dts
+++ b/dts/src/arm/socfpga_arria5_socdk.dts
@@ -29,22 +29,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&porta 0 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 11 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&porta 17 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&porta 18 1>;
 		};
diff --git a/dts/src/arm/socfpga_cyclone5.dtsi b/dts/src/arm/socfpga_cyclone5.dtsi
index 319a71e41e..305fe207b2 100644
--- a/dts/src/arm/socfpga_cyclone5.dtsi
+++ b/dts/src/arm/socfpga_cyclone5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts b/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts
index c8f051fb2b..bedf577cb0 100644
--- a/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts
+++ b/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts
@@ -33,7 +33,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 24 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/dts/src/arm/socfpga_cyclone5_mcv.dtsi b/dts/src/arm/socfpga_cyclone5_mcv.dtsi
index bd92806ffc..3b9daddf91 100644
--- a/dts/src/arm/socfpga_cyclone5_mcv.dtsi
+++ b/dts/src/arm/socfpga_cyclone5_mcv.dtsi
@@ -18,5 +18,6 @@
 
 &mmc0 {	/* On-SoM eMMC */
 	bus-width = <8>;
+	clk-phase-sd-hs = <0>, <135>;
 	status = "okay";
 };
diff --git a/dts/src/arm/socfpga_cyclone5_socdk.dts b/dts/src/arm/socfpga_cyclone5_socdk.dts
index b2241205c7..c7f5fa0ba0 100644
--- a/dts/src/arm/socfpga_cyclone5_socdk.dts
+++ b/dts/src/arm/socfpga_cyclone5_socdk.dts
@@ -29,22 +29,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 15 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 14 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 13 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&portb 12 1>;
 		};
diff --git a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts
index f24f17c2f5..e0630b0eed 100644
--- a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts
+++ b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts
@@ -141,7 +141,7 @@
 		reg = <0x50>;
 	};
 
-	i2cswitch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/dts/src/arm/socfpga_vt.dts b/dts/src/arm/socfpga_vt.dts
index a77846f73b..3d0d806888 100644
--- a/dts/src/arm/socfpga_vt.dts
+++ b/dts/src/arm/socfpga_vt.dts
@@ -29,7 +29,7 @@
 			};
 		};
 
-		dwmmc0@ff704000 {
+		mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
diff --git a/dts/src/arm/spear300.dtsi b/dts/src/arm/spear300.dtsi
index b39bd5a226..f1135e887f 100644
--- a/dts/src/arm/spear300.dtsi
+++ b/dts/src/arm/spear300.dtsi
@@ -46,7 +46,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0x50000000 {
+		shirq: interrupt-controller@50000000 {
 			compatible = "st,spear300-shirq";
 			reg = <0x50000000 0x1000>;
 			interrupts = <28>;
diff --git a/dts/src/arm/spear310.dtsi b/dts/src/arm/spear310.dtsi
index 77570833d4..ce08d88209 100644
--- a/dts/src/arm/spear310.dtsi
+++ b/dts/src/arm/spear310.dtsi
@@ -34,7 +34,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb4000000 {
+		shirq: interrupt-controller@b4000000 {
 			compatible = "st,spear310-shirq";
 			reg = <0xb4000000 0x1000>;
 			interrupts = <28 29 30 1>;
diff --git a/dts/src/arm/spear320.dtsi b/dts/src/arm/spear320.dtsi
index b12474446a..56f141297e 100644
--- a/dts/src/arm/spear320.dtsi
+++ b/dts/src/arm/spear320.dtsi
@@ -49,7 +49,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb3000000 {
+		shirq: interrupt-controller@b3000000 {
 			compatible = "st,spear320-shirq";
 			reg = <0xb3000000 0x1000>;
 			interrupts = <30 28 29 1>;
diff --git a/dts/src/arm/spear600.dtsi b/dts/src/arm/spear600.dtsi
index fd41243a0b..6b67c0ceae 100644
--- a/dts/src/arm/spear600.dtsi
+++ b/dts/src/arm/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
@@ -207,6 +207,36 @@
 				interrupts = <6>;
 				status = "disabled";
 			};
+
+			ssp1: spi@d0100000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0100000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <26>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d0180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d8180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd8180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic1>;
+				interrupts = <5>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi
index 9afe8301bd..a42a4fd692 100644
--- a/dts/src/arm/ste-dbx5x0.dtsi
+++ b/dts/src/arm/ste-dbx5x0.dtsi
@@ -1149,17 +1149,15 @@
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 1>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		hash@a03c2000 {
 			compatible = "stericsson,ux500-hash";
 			reg = <0xa03c2000 0x1000>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 2>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 	};
 };
diff --git a/dts/src/arm/ste-ux500-samsung-codina-tmo.dts b/dts/src/arm/ste-ux500-samsung-codina-tmo.dts
index 27a3ab7e25..e036393d54 100644
--- a/dts/src/arm/ste-ux500-samsung-codina-tmo.dts
+++ b/dts/src/arm/ste-ux500-samsung-codina-tmo.dts
@@ -247,7 +247,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/ste-ux500-samsung-codina.dts b/dts/src/arm/ste-ux500-samsung-codina.dts
index b88f0c0787..1a6d24a7cc 100644
--- a/dts/src/arm/ste-ux500-samsung-codina.dts
+++ b/dts/src/arm/ste-ux500-samsung-codina.dts
@@ -333,7 +333,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/ste-ux500-samsung-gavini.dts b/dts/src/arm/ste-ux500-samsung-gavini.dts
index 7231bc7452..5b445fa4c8 100644
--- a/dts/src/arm/ste-ux500-samsung-gavini.dts
+++ b/dts/src/arm/ste-ux500-samsung-gavini.dts
@@ -277,7 +277,7 @@
 	/*
 	 * TODO: See if we can use the PL023 for this instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/ste-ux500-samsung-janice.dts b/dts/src/arm/ste-ux500-samsung-janice.dts
index 69387e8754..e901cb76b8 100644
--- a/dts/src/arm/ste-ux500-samsung-janice.dts
+++ b/dts/src/arm/ste-ux500-samsung-janice.dts
@@ -271,7 +271,7 @@
 	 * this derivative is 3wire support, so it cannot be used to drive
 	 * this panel interface. We have to use GPIO bit-banging instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220 */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
@@ -373,9 +373,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		nfc@30 {
-			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
-			reg = <0x30>;
+		/* This is only mounted on the GT-I9070P */
+		nfc@2b { /* 0x30? */
+			/* NXP NFC circuit PN544 C1 marked NXP 44501  */
+			compatible = "nxp,pn544-i2c";
+			/* IF0, IF1 high, gives I2C address 0x2B */
+			reg = <0x2b>;
+			clock-frequency = <400000>;
 			/* NFC IRQ on GPIO32 */
 			interrupt-parent = <&gpio1>;
 			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
@@ -384,7 +388,7 @@
 			/* GPIO88 */
 			enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pn547_janice_default>;
+			pinctrl-0 = <&pn544_janice_default>;
 		};
 	};
 
@@ -959,7 +963,7 @@
 		};
 	};
 	nfc {
-		pn547_janice_default: pn547_janice {
+		pn544_janice_default: pn544_janice {
 			/* Interrupt line */
 			janice_cfg1 {
 				pins = "GPIO32_V2";
diff --git a/dts/src/arm/ste-ux500-samsung-kyle.dts b/dts/src/arm/ste-ux500-samsung-kyle.dts
index 167846df31..45fab5283a 100644
--- a/dts/src/arm/ste-ux500-samsung-kyle.dts
+++ b/dts/src/arm/ste-ux500-samsung-kyle.dts
@@ -315,6 +315,21 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				/* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */
+				compatible = "csr,csrg05ta03-icje-r";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&g05ta03_kyle_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
@@ -674,6 +689,20 @@
 			};
 		};
 	};
+	g05ta03 {
+		g05ta03_kyle_default: g05ta03 {
+			/* Reset line, start out de-asserted */
+			kyle_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			kyle_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
 };
 
 &ab8505_gpio {
diff --git a/dts/src/arm/stih410-b2260.dts b/dts/src/arm/stih410-b2260.dts
index 26d93f26f6..240b620400 100644
--- a/dts/src/arm/stih410-b2260.dts
+++ b/dts/src/arm/stih410-b2260.dts
@@ -27,26 +27,26 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user_green_1 {
+		led-user-green-1 {
 			label = "User_green_1";
 			gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		user_green_2 {
+		led-user-green-2 {
 			label = "User_green_2";
 			gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_3 {
+		led-user-green-3 {
 			label = "User_green_3";
 			gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_4 {
+		led-user-green-4 {
 			label = "User_green_4";
 			gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/dts/src/arm/stih418-b2199.dts b/dts/src/arm/stih418-b2199.dts
index d21bcc7c12..53ac6c2b7b 100644
--- a/dts/src/arm/stih418-b2199.dts
+++ b/dts/src/arm/stih418-b2199.dts
@@ -26,12 +26,12 @@
 
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			label = "Front Panel LED";
 			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		green {
+		led-green {
 			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
diff --git a/dts/src/arm/stih418-b2264.dts b/dts/src/arm/stih418-b2264.dts
index a99604bebf..34a518b037 100644
--- a/dts/src/arm/stih418-b2264.dts
+++ b/dts/src/arm/stih418-b2264.dts
@@ -76,7 +76,7 @@
 	soc {
 		leds {
 			compatible = "gpio-leds";
-			green {
+			led-green {
 				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
diff --git a/dts/src/arm/stihxxx-b2120.dtsi b/dts/src/arm/stihxxx-b2120.dtsi
index 2aa94605d3..920a0bad74 100644
--- a/dts/src/arm/stihxxx-b2120.dtsi
+++ b/dts/src/arm/stihxxx-b2120.dtsi
@@ -9,12 +9,12 @@
 / {
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			label = "Front Panel LED";
 			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		green {
+		led-green {
 			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
diff --git a/dts/src/arm/stm32h743.dtsi b/dts/src/arm/stm32h743.dtsi
index 2059593da2..28e3deb20e 100644
--- a/dts/src/arm/stm32h743.dtsi
+++ b/dts/src/arm/stm32h743.dtsi
@@ -375,7 +375,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -389,7 +388,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
diff --git a/dts/src/arm/stm32mp13-pinctrl.dtsi b/dts/src/arm/stm32mp13-pinctrl.dtsi
index efdd163eba..d377d4c0be 100644
--- a/dts/src/arm/stm32mp13-pinctrl.dtsi
+++ b/dts/src/arm/stm32mp13-pinctrl.dtsi
@@ -6,6 +6,13 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */
+		};
+	};
+
 	i2c1_pins_a: i2c1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -40,6 +47,13 @@
 		};
 	};
 
+	mcp23017_pins_a: mcp23017-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
@@ -165,6 +179,13 @@
 		};
 	};
 
+	stm32g0_intn_pins_a: stm32g0-intn-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
 	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
diff --git a/dts/src/arm/stm32mp131.dtsi b/dts/src/arm/stm32mp131.dtsi
index dd35a60707..accc3824f7 100644
--- a/dts/src/arm/stm32mp131.dtsi
+++ b/dts/src/arm/stm32mp131.dtsi
@@ -77,6 +77,28 @@
 		always-on;
 	};
 
+	/* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */
+	reg11: reg11 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+	};
+
+	reg18: reg18 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usb33: usb33 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -231,6 +253,66 @@
 			dma-channels = <16>;
 		};
 
+		adc_2: adc@48004000 {
+			compatible = "st,stm32mp13-adc-core";
+			reg = <0x48004000 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc2: adc@0 {
+				compatible = "st,stm32mp13-adc";
+				#io-channel-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_2>;
+				interrupts = <0>;
+				dmas = <&dmamux1 10 0x400 0x80000001>;
+				dma-names = "rx";
+				status = "disabled";
+
+				channel@13 {
+					reg = <13>;
+					label = "vrefint";
+				};
+				channel@14 {
+					reg = <14>;
+					label = "vddcore";
+				};
+				channel@16 {
+					reg = <16>;
+					label = "vddcpu";
+				};
+				channel@17 {
+					reg = <17>;
+					label = "vddq_ddr";
+				};
+			};
+		};
+
+		usbotg_hs: usb@49000000 {
+			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+			reg = <0x49000000 0x40000>;
+			clocks = <&rcc USBO_K>;
+			clock-names = "otg";
+			resets = <&rcc USBO_R>;
+			reset-names = "dwc2";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+			dr_mode = "otg";
+			otg-rev = <0x200>;
+			usb33d-supply = <&usb33>;
+			status = "disabled";
+		};
+
 		spi4: spi@4c002000 {
 			compatible = "st,stm32h7-spi";
 			reg = <0x4c002000 0x400>;
@@ -354,7 +436,6 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
@@ -369,7 +450,6 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;
@@ -379,6 +459,25 @@
 			status = "disabled";
 		};
 
+		usbh_ohci: usb@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbh_ehci: usb@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			status = "disabled";
+		};
+
 		iwdg2: watchdog@5a002000 {
 			compatible = "st,stm32mp1-iwdg";
 			reg = <0x5a002000 0x400>;
@@ -387,6 +486,29 @@
 			status = "disabled";
 		};
 
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
 		rtc: rtc@5c004000 {
 			compatible = "st,stm32mp1-rtc";
 			reg = <0x5c004000 0x400>;
diff --git a/dts/src/arm/stm32mp133.dtsi b/dts/src/arm/stm32mp133.dtsi
index 531c263c9f..df451c3c2a 100644
--- a/dts/src/arm/stm32mp133.dtsi
+++ b/dts/src/arm/stm32mp133.dtsi
@@ -33,5 +33,36 @@
 			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
+
+		adc_1: adc@48003000 {
+			compatible = "st,stm32mp13-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp13-adc";
+				#io-channel-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_1>;
+				interrupts = <0>;
+				dmas = <&dmamux1 9 0x400 0x80000001>;
+				dma-names = "rx";
+				status = "disabled";
+
+				channel@18 {
+					reg = <18>;
+					label = "vrefint";
+				};
+			};
+		};
 	};
 };
diff --git a/dts/src/arm/stm32mp135f-dk.dts b/dts/src/arm/stm32mp135f-dk.dts
index de341d17e8..9ff5a3eaf5 100644
--- a/dts/src/arm/stm32mp135f-dk.dts
+++ b/dts/src/arm/stm32mp135f-dk.dts
@@ -59,6 +59,22 @@
 		};
 	};
 
+	v3v3_sw: v3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3_sw";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc: vdd-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	vdd_sd: vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_sd";
@@ -66,6 +82,39 @@
 		regulator-max-microvolt = <2900000>;
 		regulator-always-on;
 	};
+
+	vdd_usb: vdd-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_usb_cc_pins_a>;
+	vdda-supply = <&vdd_adc>;
+	vref-supply = <&vdd_adc>;
+	status = "okay";
+	adc1: adc@0 {
+		status = "okay";
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (5.1 + 47kOhms) * 5pF => 1.3us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@12 {
+			reg = <12>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
 };
 
 &i2c1 {
@@ -79,6 +128,42 @@
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
+
+	mcp23017: pinctrl@21 {
+		compatible = "microchip,mcp23017";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp23017_pins_a>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		microchip,irq-mirror;
+	};
+
+	typec@53 {
+		compatible = "st,stm32g0-typec";
+		reg = <0x53>;
+		/* Alert pin on PI2 */
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioi>;
+		/* Internal pull-up on PI2 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&stm32g0_intn_pins_a>;
+		firmware-name = "stm32g0-ucsi.mp135f-dk.fw";
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+
+			port {
+				con_usb_c_g0_ep: endpoint {
+					remote-endpoint = <&usbotg_hs_ep>;
+				};
+			};
+		};
+	};
 };
 
 &i2c5 {
@@ -108,7 +193,7 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
@@ -128,3 +213,60 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	status = "okay";
 };
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3_sw>;
+	};
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb-role-switch;
+	status = "okay";
+	port {
+		usbotg_hs_ep: endpoint {
+			remote-endpoint = <&con_usb_c_g0_ep>;
+		};
+	};
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
diff --git a/dts/src/arm/stm32mp151.dtsi b/dts/src/arm/stm32mp151.dtsi
index e02b3f5d44..5491b6c4de 100644
--- a/dts/src/arm/stm32mp151.dtsi
+++ b/dts/src/arm/stm32mp151.dtsi
@@ -1118,7 +1118,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC3_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC3_R>;
@@ -1439,7 +1438,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
@@ -1454,7 +1452,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;
diff --git a/dts/src/arm/stm32mp151a-dhcor-testbench.dts b/dts/src/arm/stm32mp151a-dhcor-testbench.dts
new file mode 100644
index 0000000000..e0f828ecc2
--- /dev/null
+++ b/dts/src/arm/stm32mp151a-dhcor-testbench.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-testbench.dtsi"
+
+/ {
+	model = "DH electronics STM32MP151A DHCOR Testbench";
+	compatible = "dh,stm32mp151a-dhcor-testbench",
+		     "dh,stm32mp151a-dhcor-som",
+		     "st,stm32mp151";
+};
diff --git a/dts/src/arm/stm32mp157a-dhcor-avenger96.dts b/dts/src/arm/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4e..275167f26f 100644
--- a/dts/src/arm/stm32mp157a-dhcor-avenger96.dts
+++ b/dts/src/arm/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git a/dts/src/arm/stm32mp157c-emstamp-argon.dtsi b/dts/src/arm/stm32mp157c-emstamp-argon.dtsi
index 30156b7546..aef02e6421 100644
--- a/dts/src/arm/stm32mp157c-emstamp-argon.dtsi
+++ b/dts/src/arm/stm32mp157c-emstamp-argon.dtsi
@@ -173,7 +173,7 @@
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts
index 050c3c27a4..a665189fe6 100644
--- a/dts/src/arm/stm32mp157c-ev1.dts
+++ b/dts/src/arm/stm32mp157c-ev1.dts
@@ -144,7 +144,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -370,6 +370,14 @@
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3>;
+	};
 };
 
 &usbotg_hs {
@@ -393,6 +401,11 @@
 	st,tune-squelch-level = <3>;
 	st,tune-hs-rx-offset = <2>;
 	st,no-lsfs-sc;
+
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
 };
 
 &usbphyc_port1 {
diff --git a/dts/src/arm/stm32mp157c-lxa-mc1.dts b/dts/src/arm/stm32mp157c-lxa-mc1.dts
index e8d2ec41d5..cb00ce7cec 100644
--- a/dts/src/arm/stm32mp157c-lxa-mc1.dts
+++ b/dts/src/arm/stm32mp157c-lxa-mc1.dts
@@ -112,7 +112,7 @@
 	phy-handle = <&ethphy>;
 	status = "okay";
 
-	mdio0 {
+	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/dts/src/arm/stm32mp157c-odyssey.dts b/dts/src/arm/stm32mp157c-odyssey.dts
index ed66d25b8b..a8b3f7a547 100644
--- a/dts/src/arm/stm32mp157c-odyssey.dts
+++ b/dts/src/arm/stm32mp157c-odyssey.dts
@@ -41,7 +41,7 @@
 	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
 	st,eth-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/dts/src/arm/stm32mp15xx-dhcom-pdk2.dtsi b/dts/src/arm/stm32mp15xx-dhcom-pdk2.dtsi
index 5f586f0240..4709677151 100644
--- a/dts/src/arm/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/dts/src/arm/stm32mp15xx-dhcom-pdk2.dtsi
@@ -242,7 +242,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_tx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <512>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
@@ -260,7 +260,7 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_rx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <512>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
diff --git a/dts/src/arm/stm32mp15xx-dhcom-som.dtsi b/dts/src/arm/stm32mp15xx-dhcom-som.dtsi
index 238a611192..002f221f16 100644
--- a/dts/src/arm/stm32mp15xx-dhcom-som.dtsi
+++ b/dts/src/arm/stm32mp15xx-dhcom-som.dtsi
@@ -125,7 +125,7 @@
 	max-speed = <100>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi b/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi
index 90933077d6..50af4a27d6 100644
--- a/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi
@@ -66,7 +66,6 @@
 		led4 {
 			label = "green:user3";
 			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
 			default-state = "off";
 			panic-indicator;
 		};
@@ -100,7 +99,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -151,7 +150,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -359,7 +358,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&adv7513_i2s0>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 			};
 		};
diff --git a/dts/src/arm/stm32mp15xx-dhcor-drc-compact.dtsi b/dts/src/arm/stm32mp15xx-dhcor-drc-compact.dtsi
index 27477bb219..c32c160f97 100644
--- a/dts/src/arm/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/dts/src/arm/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -78,7 +78,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/dts/src/arm/stm32mp15xx-dhcor-testbench.dtsi b/dts/src/arm/stm32mp15xx-dhcor-testbench.dtsi
new file mode 100644
index 0000000000..5fdb74b652
--- /dev/null
+++ b/dts/src/arm/stm32mp15xx-dhcor-testbench.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	status = "okay";
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/dts/src/arm/stm32mp15xx-dkx.dtsi b/dts/src/arm/stm32mp15xx-dkx.dtsi
index 8b48d3c89a..7798a2e17c 100644
--- a/dts/src/arm/stm32mp15xx-dkx.dtsi
+++ b/dts/src/arm/stm32mp15xx-dkx.dtsi
@@ -141,7 +141,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -508,7 +508,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_tx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
@@ -526,7 +526,7 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_rx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
diff --git a/dts/src/arm/suniv-f1c100s.dtsi b/dts/src/arm/suniv-f1c100s.dtsi
index 0edc172440..9455d27e51 100644
--- a/dts/src/arm/suniv-f1c100s.dtsi
+++ b/dts/src/arm/suniv-f1c100s.dtsi
@@ -166,6 +166,12 @@
 				drive-strength = <30>;
 			};
 
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
 			spi0_pc_pins: spi0-pc-pins {
 				pins = "PC0", "PC1", "PC2", "PC3";
 				function = "spi0";
@@ -177,6 +183,42 @@
 			};
 		};
 
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		timer@1c20c00 {
 			compatible = "allwinner,suniv-f1c100s-timer";
 			reg = <0x01c20c00 0x90>;
@@ -192,6 +234,34 @@
 			clocks = <&osc32k>;
 		};
 
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
 		uart0: serial@1c25000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c25000 0x400>;
diff --git a/dts/src/arm/sunplus-sp7021.dtsi b/dts/src/arm/sunplus-sp7021.dtsi
index 7dc4ce3619..ae9bbe0320 100644
--- a/dts/src/arm/sunplus-sp7021.dtsi
+++ b/dts/src/arm/sunplus-sp7021.dtsi
@@ -211,7 +211,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_1>;
 			resets = <&rstc RST_SPI_COMBO_1>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
@@ -225,7 +224,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_2>;
 			resets = <&rstc RST_SPI_COMBO_2>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
@@ -239,7 +237,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_3>;
 			resets = <&rstc RST_SPI_COMBO_3>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi
index e899d14f38..1d1d127cf3 100644
--- a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi
+++ b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi
@@ -89,13 +89,13 @@
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
-		      compatible = "regulator-fixed";
-		      regulator-name = "gmac-3v3";
-		      regulator-min-microvolt = <3300000>;
-		      regulator-max-microvolt = <3300000>;
-		      startup-delay-us = <100000>;
-		      enable-active-high;
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {
diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi
index 09aefb4e90..686193bd6b 100644
--- a/dts/src/arm/sunxi-h3-h5.dtsi
+++ b/dts/src/arm/sunxi-h3-h5.dtsi
@@ -302,6 +302,8 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -312,6 +314,8 @@
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm/tegra114-asus-tf701t.dts b/dts/src/arm/tegra114-asus-tf701t.dts
index 284209b0bd..9279d24db0 100644
--- a/dts/src/arm/tegra114-asus-tf701t.dts
+++ b/dts/src/arm/tegra114-asus-tf701t.dts
@@ -80,7 +80,7 @@
 	};
 
 	pinmux@70000868 {
-		asus_pad_ec_default: asus-pad-ec-default {
+		asus_pad_ec_default: pinmux-asus-pad-ec-default {
 			ec-interrupt {
 				nvidia,pins = "kb_col5_pq5";
 				nvidia,function = "kbc";
@@ -98,7 +98,7 @@
 			};
 		};
 
-		backlight_default: backlight-default {
+		backlight_default: pinmux-backlight-default {
 			backlight-enable {
 				nvidia,pins = "gmi_ad10_ph2";
 				nvidia,function = "gmi";
@@ -108,7 +108,7 @@
 			};
 		};
 
-		codec_default: codec-default {
+		codec_default: pinmux-codec-default {
 			ldo1-en {
 				nvidia,pins = "sdmmc1_wp_n_pv3";
 				nvidia,function = "sdmmc1";
@@ -127,7 +127,7 @@
 			};
 		};
 
-		gpio_keys_default: gpio-keys-default {
+		gpio_keys_default: pinmux-gpio-keys-default {
 			power {
 				nvidia,pins = "kb_col0_pq0";
 				nvidia,function = "kbc";
@@ -146,7 +146,7 @@
 			};
 		};
 
-		gpio_hall_sensor_default: gpio-hall-sensor-default {
+		gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default {
 			ulpi_data4_po5 {
 				nvidia,pins = "ulpi_data4_po5";
 				nvidia,function = "spi2";
@@ -156,7 +156,7 @@
 			};
 		};
 
-		hp_det_default: hp-det-default {
+		hp_det_default: pinmux-hp-det-default {
 			gmi_iordy_pi5 {
 				nvidia,pins = "kb_row7_pr7";
 				nvidia,function = "rsvd2";
@@ -166,7 +166,7 @@
 			};
 		};
 
-		imu_default: imu-default {
+		imu_default: pinmux-imu-default {
 			kb_row3_pr3 {
 				nvidia,pins = "kb_row3_pr3";
 				nvidia,function = "rsvd3";
@@ -176,7 +176,7 @@
 			};
 		};
 
-		pwm_default: pwm-default {
+		pwm_default: pinmux-pwm-default {
 			gmi_ad9_ph1 {
 				nvidia,pins = "gmi_ad9_ph1";
 				nvidia,function = "pwm1";
@@ -187,7 +187,7 @@
 		};
 
 		/* XXX make this something more sensible */
-		pwm_sleep: pwm-sleep {
+		pwm_sleep: pinmux-pwm-sleep {
 			gmi_ad9_ph1 {
 				nvidia,pins = "gmi_ad9_ph1";
 				nvidia,function = "pwm1";
@@ -197,7 +197,7 @@
 			};
 		};
 
-		sdmmc3_default: sdmmc3-default {
+		sdmmc3_default: pinmux-sdmmc3-default {
 			sdmmc3_clk_pa6 {
 				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
@@ -233,7 +233,7 @@
 			};
 		};
 
-		sdmmc3_vdd_default: sdmmc3-vdd-default {
+		sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default {
 			gmi_clk_pk1 {
 				nvidia,pins = "gmi_clk_pk1";
 				nvidia,function = "gmi";
@@ -243,7 +243,7 @@
 			};
 		};
 
-		vdd_lcd_default: vdd-lcd-default {
+		vdd_lcd_default: pinmux-vdd-lcd-default {
 			sdmmc4_clk_pcc4 {
 				nvidia,pins = "sdmmc4_clk_pcc4";
 				nvidia,function = "sdmmc4";
diff --git a/dts/src/arm/tegra124-nyan-big.dts b/dts/src/arm/tegra124-nyan-big.dts
index fdc1d64dff..9a01dfed13 100644
--- a/dts/src/arm/tegra124-nyan-big.dts
+++ b/dts/src/arm/tegra124-nyan-big.dts
@@ -18,6 +18,7 @@
 			aux-bus {
 				panel: panel {
 					compatible = "auo,b133xtn01";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
@@ -39,7 +40,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git a/dts/src/arm/tegra124-nyan-blaze.dts b/dts/src/arm/tegra124-nyan-blaze.dts
index abdf445682..0beef1c03f 100644
--- a/dts/src/arm/tegra124-nyan-blaze.dts
+++ b/dts/src/arm/tegra124-nyan-blaze.dts
@@ -20,6 +20,7 @@
 			aux-bus {
 				panel: panel {
 					compatible = "samsung,ltn140at29-301";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
@@ -37,7 +38,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git a/dts/src/arm/tegra124-venice2.dts b/dts/src/arm/tegra124-venice2.dts
index 8f40fcfc11..7e739879c0 100644
--- a/dts/src/arm/tegra124-venice2.dts
+++ b/dts/src/arm/tegra124-venice2.dts
@@ -52,6 +52,7 @@
 			aux-bus {
 				panel: panel {
 					compatible = "lg,lp129qe";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
@@ -70,7 +71,7 @@
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
-		pinmux_boot: common {
+		pinmux_boot: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
diff --git a/dts/src/arm/tegra20-acer-a500-picasso.dts b/dts/src/arm/tegra20-acer-a500-picasso.dts
index dac6d02a1b..17afc2c7cb 100644
--- a/dts/src/arm/tegra20-acer-a500-picasso.dts
+++ b/dts/src/arm/tegra20-acer-a500-picasso.dts
@@ -342,7 +342,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -353,7 +353,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -364,7 +364,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/dts/src/arm/tegra20-asus-tf101.dts b/dts/src/arm/tegra20-asus-tf101.dts
index bf797a1f27..c39ddb462a 100644
--- a/dts/src/arm/tegra20-asus-tf101.dts
+++ b/dts/src/arm/tegra20-asus-tf101.dts
@@ -399,7 +399,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -411,7 +411,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -423,7 +423,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -1019,7 +1019,7 @@
 	};
 
 	display-panel {
-		compatible = "panel-lvds";
+		compatible = "auo,b101ew05", "panel-lvds";
 
 		/* AUO B101EW05 using custom timings */
 
diff --git a/dts/src/arm/tegra20-seaboard.dts b/dts/src/arm/tegra20-seaboard.dts
index 5b4c5ef309..ab33ff67fd 100644
--- a/dts/src/arm/tegra20-seaboard.dts
+++ b/dts/src/arm/tegra20-seaboard.dts
@@ -285,7 +285,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -296,7 +296,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -307,7 +307,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/dts/src/arm/tegra20-tamonten.dtsi b/dts/src/arm/tegra20-tamonten.dtsi
index 0e19bd0a84..980272ad59 100644
--- a/dts/src/arm/tegra20-tamonten.dtsi
+++ b/dts/src/arm/tegra20-tamonten.dtsi
@@ -249,7 +249,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -260,7 +260,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -271,7 +271,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/dts/src/arm/tegra20-ventana.dts b/dts/src/arm/tegra20-ventana.dts
index caa17e876e..2d7bb442d6 100644
--- a/dts/src/arm/tegra20-ventana.dts
+++ b/dts/src/arm/tegra20-ventana.dts
@@ -284,7 +284,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -295,7 +295,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -306,7 +306,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/dts/src/arm/tegra30-asus-transformer-common.dtsi b/dts/src/arm/tegra30-asus-transformer-common.dtsi
index c27e70d8bf..08ea9cb32d 100644
--- a/dts/src/arm/tegra30-asus-transformer-common.dtsi
+++ b/dts/src/arm/tegra30-asus-transformer-common.dtsi
@@ -168,7 +168,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* SDMMC3 pinmux */
@@ -711,7 +711,7 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* GPIO keys pinmux */
@@ -805,7 +805,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_d10_pt2 {
@@ -937,7 +937,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_mclk_pt1 {
@@ -1509,7 +1509,6 @@
 
 	extcon-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		switch-dock-hall-sensor {
 			label = "Lid sensor";
@@ -1542,7 +1541,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		key-power {
 			label = "Power";
diff --git a/dts/src/arm/tegra30-pegatron-chagall.dts b/dts/src/arm/tegra30-pegatron-chagall.dts
index 7c81f02055..d9408a9065 100644
--- a/dts/src/arm/tegra30-pegatron-chagall.dts
+++ b/dts/src/arm/tegra30-pegatron-chagall.dts
@@ -134,7 +134,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* SDMMC3 pinmux */
@@ -150,7 +150,6 @@
 				nvidia,pins = "sdmmc3_cmd_pa7",
 						"sdmmc3_dat3_pb4",
 						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat2_pb5",
 						"sdmmc3_dat1_pb6",
 						"sdmmc3_dat0_pb7",
 						"sdmmc3_dat5_pd0",
@@ -622,7 +621,7 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			pu1 {
@@ -689,7 +688,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_d10_pt2 {
@@ -864,7 +863,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_mclk_pt1 {
@@ -2653,7 +2652,6 @@
 
 	extcon-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		switch-dock-insert {
 			label = "Chagall Dock";
@@ -2686,7 +2684,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		key-power {
 			label = "Power";
diff --git a/dts/src/arm/uniphier-pro5-epcore.dts b/dts/src/arm/uniphier-pro5-epcore.dts
new file mode 100644
index 0000000000..ed759dcc32
--- /dev/null
+++ b/dts/src/arm/uniphier-pro5-epcore.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 EP-CORE Board (Pro5-PCIe_EP-CORE)
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier Pro5 EP-CORE Board";
+	compatible = "socionext,uniphier-pro5-epcore", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/dts/src/arm/uniphier-pro5-proex.dts b/dts/src/arm/uniphier-pro5-proex.dts
new file mode 100644
index 0000000000..2cfb84f73c
--- /dev/null
+++ b/dts/src/arm/uniphier-pro5-proex.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 ProEX Board
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+
+/ {
+	model = "UniPhier Pro5 ProEX Board";
+	compatible = "socionext,uniphier-pro5-proex", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/dts/src/arm/vexpress-v2m.dtsi b/dts/src/arm/vexpress-v2m.dtsi
index f434fe5cf4..def538ce87 100644
--- a/dts/src/arm/vexpress-v2m.dtsi
+++ b/dts/src/arm/vexpress-v2m.dtsi
@@ -383,49 +383,49 @@
 			leds {
 				compatible = "gpio-leds";
 
-				user1 {
+				led-user1 {
 					label = "v2m:green:user1";
 					gpios = <&v2m_led_gpios 0 0>;
 					linux,default-trigger = "heartbeat";
 				};
 
-				user2 {
+				led-user2 {
 					label = "v2m:green:user2";
 					gpios = <&v2m_led_gpios 1 0>;
 					linux,default-trigger = "mmc0";
 				};
 
-				user3 {
+				led-user3 {
 					label = "v2m:green:user3";
 					gpios = <&v2m_led_gpios 2 0>;
 					linux,default-trigger = "cpu0";
 				};
 
-				user4 {
+				led-user4 {
 					label = "v2m:green:user4";
 					gpios = <&v2m_led_gpios 3 0>;
 					linux,default-trigger = "cpu1";
 				};
 
-				user5 {
+				led-user5 {
 					label = "v2m:green:user5";
 					gpios = <&v2m_led_gpios 4 0>;
 					linux,default-trigger = "cpu2";
 				};
 
-				user6 {
+				led-user6 {
 					label = "v2m:green:user6";
 					gpios = <&v2m_led_gpios 5 0>;
 					linux,default-trigger = "cpu3";
 				};
 
-				user7 {
+				led-user7 {
 					label = "v2m:green:user7";
 					gpios = <&v2m_led_gpios 6 0>;
 					linux,default-trigger = "cpu4";
 				};
 
-				user8 {
+				led-user8 {
 					label = "v2m:green:user8";
 					gpios = <&v2m_led_gpios 7 0>;
 					linux,default-trigger = "cpu5";
diff --git a/dts/src/arm/vf610-zii-dev-rev-c.dts b/dts/src/arm/vf610-zii-dev-rev-c.dts
index de79dcfd32..f892977da9 100644
--- a/dts/src/arm/vf610-zii-dev-rev-c.dts
+++ b/dts/src/arm/vf610-zii-dev-rev-c.dts
@@ -259,7 +259,7 @@
 		xtal-trim = /bits/ 8 <0x06>;
 
 		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;
 
 		fsl,spi-cs-sck-delay = <180>;
 		fsl,spi-sck-cs-delay = <250>;
diff --git a/dts/src/arm64/allwinner/axp803.dtsi b/dts/src/arm64/allwinner/axp803.dtsi
index 578ef368e2..a6b4b87f18 100644
--- a/dts/src/arm64/allwinner/axp803.dtsi
+++ b/dts/src/arm64/allwinner/axp803.dtsi
@@ -25,16 +25,6 @@
 		compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 620cb3ef5f..50ed2e9f10 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
@@ -406,6 +406,20 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
 &usb_otg {
 	dr_mode = "host";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts b/dts/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
index 02893f3ac9..cb8600d0ea 100644
--- a/dts/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -49,8 +49,24 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+	};
 };
 
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
 &emac0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
@@ -76,6 +92,10 @@
 	status = "okay";
 };
 
+&ohci1 {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -211,3 +231,24 @@
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h616-x96-mate.dts b/dts/src/arm64/allwinner/sun50i-h616-x96-mate.dts
index 6619db3471..07424c28b6 100644
--- a/dts/src/arm64/allwinner/sun50i-h616-x96-mate.dts
+++ b/dts/src/arm64/allwinner/sun50i-h616-x96-mate.dts
@@ -32,6 +32,14 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -54,6 +62,14 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -175,3 +191,12 @@
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h616.dtsi b/dts/src/arm64/allwinner/sun50i-h616.dtsi
index 622a1f7d16..74aed0d232 100644
--- a/dts/src/arm64/allwinner/sun50i-h616.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h616.dtsi
@@ -504,6 +504,166 @@
 			};
 		};
 
+		usbotg: usb@5100000 {
+			compatible = "allwinner,sun50i-h616-musb",
+				     "allwinner,sun8i-h3-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-h616-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x14>,
+			      <0x05200800 0x14>,
+			      <0x05310800 0x14>,
+			      <0x05311800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>,
+				 <&ccu CLK_BUS_EHCI2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy",
+				      "pmu2_clk";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@5310000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05310000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_BUS_EHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>,
+				 <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@5310400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05310400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		rtc: rtc@7000000 {
 			compatible = "allwinner,sun50i-h616-rtc";
 			reg = <0x07000000 0x400>;
diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi
index 14c220d878..55c5e1fddd 100644
--- a/dts/src/arm64/altera/socfpga_stratix10.dtsi
+++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi
@@ -309,6 +309,7 @@
 				 <&clkmgr STRATIX10_SDMMC_CLK>;
 			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts
index 48424e459f..17752ca743 100644
--- a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts
+++ b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts
@@ -22,17 +22,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
@@ -105,6 +105,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
index 847a7c01f5..ede99dcc05 100644
--- a/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
+++ b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
@@ -22,17 +22,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/src/arm64/amlogic/meson-a1.dtsi b/dts/src/arm64/amlogic/meson-a1.dtsi
index b4000cf65a..d2f7cb4e53 100644
--- a/dts/src/arm64/amlogic/meson-a1.dtsi
+++ b/dts/src/arm64/amlogic/meson-a1.dtsi
@@ -36,6 +36,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi
index 04f797b5a0..1648e67afb 100644
--- a/dts/src/arm64/amlogic/meson-axg.dtsi
+++ b/dts/src/arm64/amlogic/meson-axg.dtsi
@@ -105,6 +105,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi
index 45947c1031..9dbd50820b 100644
--- a/dts/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi
@@ -1705,6 +1705,12 @@
 			};
 		};
 
+		pmu: pmu@ff638000 {
+			reg = <0x0 0xff638000 0x0 0x100>,
+			      <0x0 0xff638c00 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		aobus: bus@ff800000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xff800000 0x0 0x100000>;
diff --git a/dts/src/arm64/amlogic/meson-g12a.dtsi b/dts/src/arm64/amlogic/meson-g12a.dtsi
index fb0ab27d1f..7677764eee 100644
--- a/dts/src/arm64/amlogic/meson-g12a.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12a.dtsi
@@ -50,6 +50,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -133,3 +134,7 @@
 		};
 	};
 };
+
+&pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-go-ultra.dts b/dts/src/arm64/amlogic/meson-g12b-odroid-go-ultra.dts
new file mode 100644
index 0000000000..1e40709610
--- /dev/null
+++ b/dts/src/arm64/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -0,0 +1,722 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-GO-Ultra";
+
+	aliases {
+		serial0 = &uart_AO;
+		rtc0 = &vrtc;
+	};
+
+	adc-joystick-left {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 2>, <&saradc 3>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_Y>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_X>;
+			abs-range = <700 2900>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	adc-joystick-right {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_RY>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_RX>;
+			abs-range = <800 3000>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	codec_clk: codec-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+		clock-output-names = "codec_clk";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <10>;
+		pinctrl-0 = <&keypad_gpio_pins>;
+		pinctrl-names = "default";
+
+		volume-up-button {
+			label = "VOLUME-UP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>;
+		};
+		volume-down-button {
+			label = "VOLUME-DOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>;
+		};
+		dpad-up-button {
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+			gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>;
+		};
+		dpad-down-button {
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+			gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>;
+		};
+		dpad-left-button {
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+			gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>;
+		};
+		dpad-right-button {
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
+		};
+		a-button {
+			label = "A";
+			linux,code = <BTN_EAST>;
+			gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>;
+		};
+		b-button {
+			label = "B";
+			linux,code = <BTN_SOUTH>;
+			gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>;
+		};
+		y-button {
+			label = "Y";
+			linux,code = <BTN_WEST>;
+			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		};
+		x-button {
+			label = "X";
+			linux,code = <BTN_NORTH>;
+			gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		};
+		f1-button {
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+			gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
+		};
+		f2-button {
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+			gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+		};
+		f3-button {
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+			gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>;
+		};
+		f4-button {
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+			gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>;
+		};
+		f5-button {
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+			gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>;
+		};
+		f6-button {
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+			gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
+		};
+		top-left-button {
+			label = "TOP Left";
+			linux,code = <BTN_TL>;
+			gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>;
+		};
+		top-left2-button {
+			label = "TOP Left 2";
+			linux,code = <BTN_TL2>;
+			gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+		};
+		top-right-button {
+			label = "TOP Right";
+			linux,code = <BTN_TR>;
+			gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>;
+		};
+		top-right2-button {
+			label = "TOP Right 2";
+			linux,code = <BTN_TR2>;
+			gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_sys: regulator-vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "Odroid GO Ultra";
+		audio-widgets = "Microphone", "Mic Jack",
+				"Headphone", "Headphones",
+				"Speaker", "Internal Speakers";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>;
+		audio-routing =	"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"MICL", "Mic Jack",
+				"Headphones", "HPOL",
+				"Headphones", "HPOR",
+				"Speaker Amplifier INL", "HPOL",
+				"Speaker Amplifier INR", "HPOR",
+				"Internal Speakers", "Speaker Amplifier OUTL",
+				"Internal Speakers", "Speaker Amplifier OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rk817>;
+			};
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&hp_5v>;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+/* RK817 only supports 12.5mV steps, round up the values */
+&cpu_opp_table_0 {
+	opp-1000000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <762500>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <837500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1896000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1992000000 {
+		opp-microvolt = <1012500>;
+	};
+};
+
+/* RK818 only supports 12.5mV steps, round up the values */
+&cpub_opp_table_1 {
+	opp-1000000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <825000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <900000>;
+	};
+	opp-1800000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1908000000 {
+		opp-microvolt = <1025000>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vcc_2v3>;
+		vcc8-supply = <&vcc_2v3>;
+		vcc9-supply = <&vddao_3v3>;
+		boost-supply = <&vdd_sys>;
+		switch-supply = <&vdd_sys>;
+
+		regulators {
+			vddcpu_a: DCDC_REG1 {
+				regulator-name = "vddcpu_a";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <775000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <775000>;
+				};
+			};
+
+			vdd_ee: DCDC_REG2 {
+				regulator-name = "vdd_ee";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <875000>;
+				};
+			};
+
+			vddq_1v1: DCDC_REG3 {
+				regulator-name = "vddq_1v1";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vddao_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddao_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			hp_5v: DCDC_BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "hp_5v";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddio_ao1v8: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddio_ao1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddq_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddq_1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddio_c: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddio_c";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio_intc>;
+
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc5-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vdd_sys>;
+		vcc8-supply = <&vdd_sys>;
+		vcc9-supply = <&rk817_boost>;
+
+		#sound-dai-cells = <0>;
+		clocks = <&codec_clk>;
+		clock-names = "mclk";
+
+		#clock-cells = <1>;
+
+		regulators {
+			vddcpu_b: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <737500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vddcpu_b";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v3: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_2v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			rk817_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "rk817_boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			usb_host: OTG_SWITCH {
+				regulator-name = "usb_host";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&periphs_pinctrl {
+	keypad_gpio_pins: keypad-gpio {
+		mux {
+			groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
+			         "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
+				 "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+				 "GPIOX_12", "GPIOX_13", "GPIOX_14",  "GPIOX_15",
+				 "GPIOX_16", "GPIOX_17", "GPIOX_18",  "GPIOX_19";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_c>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb2_phy0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+	phy-supply = <&usb_host>;
+};
diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
index fd3fa82e4c..667d2b7749 100644
--- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
@@ -39,6 +39,14 @@
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -410,6 +418,40 @@
 	clock-latency = <50000>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ddr_thermal {
+	trips {
+		ddr_active: ddr-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&ddr_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
diff --git a/dts/src/arm64/amlogic/meson-g12b.dtsi b/dts/src/arm64/amlogic/meson-g12b.dtsi
index ee8fcae9f9..75ff00fb2e 100644
--- a/dts/src/arm64/amlogic/meson-g12b.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12b.dtsi
@@ -105,6 +105,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 };
@@ -139,3 +140,7 @@
 &mali {
 	dma-coherent;
 };
+
+&pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi
index 023a520054..e3c12e0be9 100644
--- a/dts/src/arm64/amlogic/meson-gx.dtsi
+++ b/dts/src/arm64/amlogic/meson-gx.dtsi
@@ -132,6 +132,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi
index 7c029f552a..923d2d8bbb 100644
--- a/dts/src/arm64/amlogic/meson-gxbb.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi
@@ -427,6 +427,20 @@
 			};
 		};
 
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
 		spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts
index 6ab1cc125b..202deb4e2d 100644
--- a/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -140,7 +140,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi
index c3ac531c4f..04e9d0f1bd 100644
--- a/dts/src/arm64/amlogic/meson-gxl.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxl.dtsi
@@ -429,6 +429,20 @@
 			};
 		};
 
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
 		spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
index f43c45daf7..b21172ece1 100644
--- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
+++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
@@ -270,7 +270,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts
index b8ef3bd8b8..1703da3235 100644
--- a/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts
+++ b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts
@@ -89,7 +89,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		wakeup-source;
 	};
diff --git a/dts/src/arm64/amlogic/meson-sm1.dtsi b/dts/src/arm64/amlogic/meson-sm1.dtsi
index 80737731af..56ca0ba224 100644
--- a/dts/src/arm64/amlogic/meson-sm1.dtsi
+++ b/dts/src/arm64/amlogic/meson-sm1.dtsi
@@ -88,6 +88,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -520,6 +521,10 @@
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };
 
+&pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
+
 &pwrc {
 	compatible = "amlogic,meson-sm1-pwrc";
 };
diff --git a/dts/src/arm64/apple/multi-die-cpp.h b/dts/src/arm64/apple/multi-die-cpp.h
new file mode 100644
index 0000000000..39e8953bf8
--- /dev/null
+++ b/dts/src/arm64/apple/multi-die-cpp.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT
+ *
+ * C preprocessor macros for t600x multi die support.
+ */
+
+#ifndef __DTS_APPLE_MULTI_DIE_CPP_H
+#define __DTS_APPLE_MULTI_DIE_CPP_H
+
+#ifndef __stringify
+#define __stringify_1(x...)     #x
+#define __stringify(x...)       __stringify_1(x)
+#endif
+
+#ifndef __concat
+#define __concat_1(x, y...)     x ## y
+#define __concat(x, y...)       __concat_1(x, y)
+#endif
+
+#define DIE_NODE(a) __concat(a, DIE)
+#define DIE_LABEL(a) __stringify(__concat(a, DIE))
+
+#endif /* !__DTS_APPLE_MULTI_DIE_CPP_H */
diff --git a/dts/src/arm64/apple/t6000-j314s.dts b/dts/src/arm64/apple/t6000-j314s.dts
new file mode 100644
index 0000000000..c9e192848f
--- /dev/null
+++ b/dts/src/arm64/apple/t6000-j314s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Pro, 2021)
+ *
+ * target-type: J314s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
+};
diff --git a/dts/src/arm64/apple/t6000-j316s.dts b/dts/src/arm64/apple/t6000-j316s.dts
new file mode 100644
index 0000000000..ff1803ce23
--- /dev/null
+++ b/dts/src/arm64/apple/t6000-j316s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Pro, 2021)
+ *
+ * target-type: J316s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
+};
diff --git a/dts/src/arm64/apple/t6000.dtsi b/dts/src/arm64/apple/t6000.dtsi
new file mode 100644
index 0000000000..89c3b211b1
--- /dev/null
+++ b/dts/src/arm64/apple/t6000.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6000 "M1 Pro" SoC
+ *
+ * Other names: H13J, "Jade Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6001, so include it and disable the missing parts */
+
+#include "t6001.dtsi"
+
+/ {
+	compatible = "apple,t6000", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
diff --git a/dts/src/arm64/apple/t6001-j314c.dts b/dts/src/arm64/apple/t6001-j314c.dts
new file mode 100644
index 0000000000..1761d15b98
--- /dev/null
+++ b/dts/src/arm64/apple/t6001-j314c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Max, 2021)
+ *
+ * target-type: J314c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
+};
diff --git a/dts/src/arm64/apple/t6001-j316c.dts b/dts/src/arm64/apple/t6001-j316c.dts
new file mode 100644
index 0000000000..750e9beeff
--- /dev/null
+++ b/dts/src/arm64/apple/t6001-j316c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Max, 2021)
+ *
+ * target-type: J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
+};
diff --git a/dts/src/arm64/apple/t6001-j375c.dts b/dts/src/arm64/apple/t6001-j375c.dts
new file mode 100644
index 0000000000..62ea437b58
--- /dev/null
+++ b/dts/src/arm64/apple/t6001-j375c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Max, 2022)
+ *
+ * target-type: J375c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Max, 2022)";
+};
diff --git a/dts/src/arm64/apple/t6001.dtsi b/dts/src/arm64/apple/t6001.dtsi
new file mode 100644
index 0000000000..620b17e403
--- /dev/null
+++ b/dts/src/arm64/apple/t6001.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6001 "M1 Max" SoC
+ *
+ * Other names: H13J, "Jade"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6001", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-gpio-pins.dtsi"
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
diff --git a/dts/src/arm64/apple/t6002-j375d.dts b/dts/src/arm64/apple/t6002-j375d.dts
new file mode 100644
index 0000000000..3365429bdc
--- /dev/null
+++ b/dts/src/arm64/apple/t6002-j375d.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Ultra, 2022)
+ *
+ * target-type: J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6002.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375d", "apple,t6002", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Ultra, 2022)";
+};
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* delete unused always-on power-domains on die 1 */
+
+/delete-node/ &ps_atc2_usb_aon_die1;
+/delete-node/ &ps_atc2_usb_die1;
+
+/delete-node/ &ps_atc3_usb_aon_die1;
+/delete-node/ &ps_atc3_usb_die1;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
diff --git a/dts/src/arm64/apple/t6002.dtsi b/dts/src/arm64/apple/t6002.dtsi
new file mode 100644
index 0000000000..a963a50117
--- /dev/null
+++ b/dts/src/arm64/apple/t6002.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6002 "M1 Ultra" SoC
+ *
+ * Other names: H13J, "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6002", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x2 0x0 0x4 0x0>,
+			 <0x5 0x80000000 0x5 0x80000000 0x1 0x80000000>,
+			 <0x7 0x0 0x7 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x22 0x0 0x4 0x0>,
+			 <0x7 0x0 0x27 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+#include "t600x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01
+				&cpu_e10 &cpu_e11>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6002, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
diff --git a/dts/src/arm64/apple/t600x-common.dtsi b/dts/src/arm64/apple/t600x-common.dtsi
new file mode 100644
index 0000000000..fa8ead6993
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-common.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Apple T6000 / T6001 / T6002 "M1 Pro/Max/Ultra" SoC
+ *
+ * Other names: H13J, "Jade Chop", "Jade", "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	icestorm_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <23000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <40000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	firestorm_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <19000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1524000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1980000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2448000000>;
+			opp-level = <9>;
+			clock-latency-ns = <49000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2676000000>;
+			opp-level = <10>;
+			clock-latency-ns = <53000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2904000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3036000000>;
+			opp-level = <12>;
+			clock-latency-ns = <56000>;
+		};
+		/* Not available until CPU deep sleep is implemented
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3168000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3228000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		*/
+	};
+
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+};
diff --git a/dts/src/arm64/apple/t600x-die0.dtsi b/dts/src/arm64/apple/t600x-die0.dtsi
new file mode 100644
index 0000000000..1c41954e38
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-die0.dtsi
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6002 "M1 Ultra" SoC and present on
+ * Apple T6000 / T6001 "M1 Pro" / "M1 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6000-nco", "apple,nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6000-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x4>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	pinctrl_smc: pinctrl@290820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x90820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 743 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 744 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 745 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 746 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 747 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 748 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	wdt: watchdog@2922b0000 {
+		compatible = "apple,t6000-wdt", "apple,wdt";
+		reg = <0x2 0x922b0000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart_0: iommu@39b004000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b004000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	sio_dart_1: iommu@39b008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1119 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1120 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1121 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1122 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1123 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1124 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x1000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1097 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6000-admac", "apple,admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1118 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart_0 2>, <&sio_dart_1 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6000-mca", "apple,mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1112 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1113 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1114 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1115 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	pcie0_dart_0: iommu@581008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x81008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1271 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@582008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x82008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1274 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_2: iommu@583008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x83008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_3: iommu@584008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x84008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0: pcie@590000000 {
+		compatible = "apple,t6000-pcie", "apple,pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x90000000 0x0 0x1000000>,
+			<0x5 0x80000000 0x0 0x100000>,
+			<0x5 0x81000000 0x0 0x4000>,
+			<0x5 0x82000000 0x0 0x4000>,
+			<0x5 0x83000000 0x0 0x4000>,
+			<0x5 0x84000000 0x0 0x4000>;
+		reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1270 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1273 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1276 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1279 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1581 IRQ_TYPE_EDGE_RISING 32>;
+
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+		};
+	};
diff --git a/dts/src/arm64/apple/t600x-dieX.dtsi b/dts/src/arm64/apple/t600x-dieX.dtsi
new file mode 100644
index 0000000000..a32ff0c9d7
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-dieX.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on both dies on the Apple T6002 "M1 Ultra" and present on
+ * Apple T6000/T6001 "M1 Pro/Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x4000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@28e580000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e580000 0 0xc000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@2921f0000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x921f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 16>;
+		apple,npins = <16>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 623 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 624 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 625 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 626 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 627 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 628 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 629 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@292280000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x92280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@293820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x93820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 63>;
+		apple,npins = <63>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 567 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 568 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 569 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 570 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 571 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 572 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 573 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 427 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 428 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 429 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 430 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 431 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 432 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 433 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/dts/src/arm64/apple/t600x-gpio-pins.dtsi b/dts/src/arm64/apple/t600x-gpio-pins.dtsi
new file mode 100644
index 0000000000..b31f1a7a2b
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-gpio-pins.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(92, 1)>,
+			<APPLE_PINMUX(93, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(94, 1)>,
+			<APPLE_PINMUX(95, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(96, 1)>,
+			<APPLE_PINMUX(97, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(98, 1)>,
+			<APPLE_PINMUX(99, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(8, 1)>,
+			<APPLE_PINMUX(9, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(100, 1)>,
+			<APPLE_PINMUX(101, 1)>;
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/dts/src/arm64/apple/t600x-j314-j316.dtsi b/dts/src/arm64/apple/t600x-j314-j316.dtsi
new file mode 100644
index 0000000000..34906d522f
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-j314-j316.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2021)
+ *
+ * This file contains the parts common to J314 and J316 devices with both t6000 and t6001.
+ *
+ * target-type: J314s / J314c / J316s / J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&pcie0_dart_2 {
+	status = "disabled";
+};
+
+&pcie0_dart_3 {
+	status = "disabled";
+};
+
+/delete-node/ &port02;
+/delete-node/ &port03;
diff --git a/dts/src/arm64/apple/t600x-j375.dtsi b/dts/src/arm64/apple/t600x-j375.dtsi
new file mode 100644
index 0000000000..00d3a9447c
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-j375.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (2022)
+ *
+ * This file contains the parts common to J375 devices with both t6001 and t6002.
+ *
+ * target-type: J375c / J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&port02 {
+	/* 10 Gbit Ethernet */
+	bus-range = <3 3>;
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&port03 {
+	/* USB xHCI */
+	bus-range = <4 4>;
+};
diff --git a/dts/src/arm64/apple/t600x-nvme.dtsi b/dts/src/arm64/apple/t600x-nvme.dtsi
new file mode 100644
index 0000000000..7dff738d31
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@38f408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x8f408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1069 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1070 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1071 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1072 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@393c50000 {
+		compatible = "apple,t6000-sart";
+		reg = <0x3 0x93c50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@393cc0000 {
+		compatible = "apple,t6000-nvme-ans2", "apple,nvme-ans2";
+		reg = <0x3 0x93cc0000 0x0 0x40000>, <0x3 0x8f400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die */
+		interrupts = <AIC_IRQ 0 1613 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/dts/src/arm64/apple/t600x-pmgr.dtsi b/dts/src/arm64/apple/t600x-pmgr.dtsi
new file mode 100644
index 0000000000..0bd44753b7
--- /dev/null
+++ b/dts/src/arm64/apple/t600x-pmgr.dtsi
@@ -0,0 +1,2012 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T6001 "M1 Max" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_pms_bridge): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_pms)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_pcie0_ref): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie0_ref);
+	};
+
+	DIE_NODE(ps_pcie1_ref): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie1_ref);
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_pcie1_ref)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_pcie0_ref)>;
+	};
+
+	DIE_NODE(ps_devc0_ivdmc): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(devc0_ivdmc);
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afi): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afc): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afr): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_c0_usb31drd): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usb31drd): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+	};
+
+	DIE_NODE(ps_ane_sys_cpu): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+#if DIE_NO == 0
+	/* PMP is only present on die 0 of the M1 Ultra */
+	DIE_NODE(ps_pmp): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+#endif
+
+	DIE_NODE(ps_pms_sram): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_usb): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(usb);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>, <&DIE_NODE(ps_apcie_gp)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@330 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@338 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@340 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@348 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@358 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@360 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_c0_usbctl): power-controller@368 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usbctl): power-controller@370 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart1): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart7): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart7);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@278 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@288 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@290 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@298 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@2a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@2b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@2b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@2c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@2d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@308 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@310 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispdfr_fe): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_dispdfr_be): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_be);
+		power-domains = <&DIE_NODE(ps_dispdfr_fe)>;
+	};
+
+	DIE_NODE(ps_mipi_dsi): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mipi_dsi);
+		power-domains = <&DIE_NODE(ps_dispdfr_be)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		/*
+		 * The ADT makes ps_apcie_st[1]_sys depend on ps_ans2 instead,
+		 * but we'd rather have a single power domain for the downstream
+		 * device to depend on, so use this node as the child.
+		 * This makes more sense anyway (since ANS2 uses APCIE_ST).
+		 */
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@3c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+	};
+
+	DIE_NODE(ps_msr1): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	/* Seems to be disabled on shipping hardware */
+#if 0
+	DIE_NODE(ps_ane1_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>;
+	};
+
+	DIE_NODE(ps_ane1_sys_cpu): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane1_sys)>;
+	};
+#endif
+
+	DIE_NODE(ps_venc1_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe4)>, <&DIE_NODE(ps_venc1_pipe5)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@88 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@90 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@98 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_gp_usb_aon): power-controller@a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gp_usb_aon);
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_usb): power-controller@c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_usb);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_debug_auth): power-controller@c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_auth);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_usb_aon)>, <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_usb_aon)>, <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_usb_aon)>, <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_usb_aon)>, <&DIE_NODE(ps_atc3_common)>;
+	};
+};
diff --git a/dts/src/arm64/apple/t8103-j274.dts b/dts/src/arm64/apple/t8103-j274.dts
index c1f3ba9c39..b52ddc4098 100644
--- a/dts/src/arm64/apple/t8103-j274.dts
+++ b/dts/src/arm64/apple/t8103-j274.dts
@@ -21,6 +21,10 @@
 	};
 };
 
+&bluetooth0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
 &wifi0 {
 	brcm,board-type = "apple,atlantisb";
 };
diff --git a/dts/src/arm64/apple/t8103-j293.dts b/dts/src/arm64/apple/t8103-j293.dts
index ecb10d237a..151074109a 100644
--- a/dts/src/arm64/apple/t8103-j293.dts
+++ b/dts/src/arm64/apple/t8103-j293.dts
@@ -17,6 +17,10 @@
 	model = "Apple MacBook Pro (13-inch, M1, 2020)";
 };
 
+&bluetooth0 {
+	brcm,board-type = "apple,honshu";
+};
+
 &wifi0 {
 	brcm,board-type = "apple,honshu";
 };
diff --git a/dts/src/arm64/apple/t8103-j313.dts b/dts/src/arm64/apple/t8103-j313.dts
index df741737b8..bc1f865aa7 100644
--- a/dts/src/arm64/apple/t8103-j313.dts
+++ b/dts/src/arm64/apple/t8103-j313.dts
@@ -17,6 +17,10 @@
 	model = "Apple MacBook Air (M1, 2020)";
 };
 
+&bluetooth0 {
+	brcm,board-type = "apple,shikoku";
+};
+
 &wifi0 {
 	brcm,board-type = "apple,shikoku";
 };
diff --git a/dts/src/arm64/apple/t8103-j456.dts b/dts/src/arm64/apple/t8103-j456.dts
index 8c6bf95925..2db425ceb3 100644
--- a/dts/src/arm64/apple/t8103-j456.dts
+++ b/dts/src/arm64/apple/t8103-j456.dts
@@ -14,13 +14,17 @@
 
 / {
 	compatible = "apple,j456", "apple,t8103", "apple,arm-platform";
-	model = "Apple iMac (24-inch, 4x USB-C, M1, 2020)";
+	model = "Apple iMac (24-inch, 4x USB-C, M1, 2021)";
 
 	aliases {
 		ethernet0 = &ethernet0;
 	};
 };
 
+&bluetooth0 {
+	brcm,board-type = "apple,capri";
+};
+
 &wifi0 {
 	brcm,board-type = "apple,capri";
 };
diff --git a/dts/src/arm64/apple/t8103-j457.dts b/dts/src/arm64/apple/t8103-j457.dts
index fe7c0aaf7d..3821ff146c 100644
--- a/dts/src/arm64/apple/t8103-j457.dts
+++ b/dts/src/arm64/apple/t8103-j457.dts
@@ -14,13 +14,17 @@
 
 / {
 	compatible = "apple,j457", "apple,t8103", "apple,arm-platform";
-	model = "Apple iMac (24-inch, 2x USB-C, M1, 2020)";
+	model = "Apple iMac (24-inch, 2x USB-C, M1, 2021)";
 
 	aliases {
 		ethernet0 = &ethernet0;
 	};
 };
 
+&bluetooth0 {
+	brcm,board-type = "apple,santorini";
+};
+
 &wifi0 {
 	brcm,board-type = "apple,santorini";
 };
diff --git a/dts/src/arm64/apple/t8103-jxxx.dtsi b/dts/src/arm64/apple/t8103-jxxx.dtsi
index 3d15b8e2a6..5988a4eb6e 100644
--- a/dts/src/arm64/apple/t8103-jxxx.dtsi
+++ b/dts/src/arm64/apple/t8103-jxxx.dtsi
@@ -11,6 +11,7 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
 		serial0 = &serial0;
 		serial2 = &serial2;
 		wifi0 = &wifi0;
@@ -77,4 +78,15 @@
 		local-mac-address = [00 00 00 00 00 00];
 		apple,antenna-sku = "XX";
 	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <900000000>;
 };
diff --git a/dts/src/arm64/apple/t8103-pmgr.dtsi b/dts/src/arm64/apple/t8103-pmgr.dtsi
index a6dbb1f485..9645861a85 100644
--- a/dts/src/arm64/apple/t8103-pmgr.dtsi
+++ b/dts/src/arm64/apple/t8103-pmgr.dtsi
@@ -339,7 +339,7 @@
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "sio_adma";
-		power-domains = <&ps_sio>, <&ps_pms>;
+		power-domains = <&ps_sio>, <&ps_pms>, <&ps_audio_p>;
 	};
 
 	ps_aes: power-controller@238 {
diff --git a/dts/src/arm64/apple/t8103.dtsi b/dts/src/arm64/apple/t8103.dtsi
index 51a63b29d4..9859219699 100644
--- a/dts/src/arm64/apple/t8103.dtsi
+++ b/dts/src/arm64/apple/t8103.dtsi
@@ -22,69 +22,279 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		cpu0: cpu@0 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu1: cpu@1 {
+		cpu_e1: cpu@1 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu2: cpu@2 {
+		cpu_e2: cpu@2 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu3: cpu@3 {
+		cpu_e3: cpu@3 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu4: cpu@10100 {
+		cpu_p0: cpu@10100 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10100>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu5: cpu@10101 {
+		cpu_p1: cpu@10101 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10101>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu6: cpu@10102 {
+		cpu_p2: cpu@10102 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10102>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu7: cpu@10103 {
+		cpu_p3: cpu@10103 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10103>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <22000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
 		};
+		opp05 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-level = <6>;
+			clock-latency-ns = <29000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2184000000>;
+			opp-level = <8>;
+			clock-latency-ns = <34000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2388000000>;
+			opp-level = <9>;
+			clock-latency-ns = <36000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-level = <10>;
+			clock-latency-ns = <51000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2772000000>;
+			opp-level = <11>;
+			clock-latency-ns = <54000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <55000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <55000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3144000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+#endif
 	};
 
 	timer {
@@ -116,6 +326,16 @@
 		clock-output-names = "clkref";
 	};
 
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -124,6 +344,27 @@
 		ranges;
 		nonposted-mmio;
 
+		cpufreq_e: performance-controller@210e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@211e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 635 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
 		i2c0: i2c@235010000 {
 			compatible = "apple,t8103-i2c", "apple,i2c";
 			reg = <0x2 0x35010000 0x0 0x4000>;
@@ -219,6 +460,61 @@
 			status = "disabled";
 		};
 
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8103-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8103-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 619 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 620 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 621 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 623 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 624 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				"tx1a", "rx1a", "tx1b", "rx1b",
+				"tx2a", "rx2a", "tx2b", "rx2b",
+				"tx3a", "rx3a", "tx3b", "rx3b",
+				"tx4a", "rx4a", "tx4b", "rx4b",
+				"tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8103-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
 		aic: interrupt-controller@23b100000 {
 			compatible = "apple,t8103-aic", "apple,aic";
 			#interrupt-cells = <3>;
@@ -229,12 +525,12 @@
 			affinities {
 				e-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_E>;
-					cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
 				};
 
 				p-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_P>;
-					cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
 				};
 			};
 		};
@@ -412,7 +708,7 @@
 			resets = <&ps_ans2>;
 		};
 
-		pcie0_dart_0: dart@681008000 {
+		pcie0_dart_0: iommu@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -421,7 +717,7 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_1: dart@682008000 {
+		pcie0_dart_1: iommu@682008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x82008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -430,7 +726,7 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_2: dart@683008000 {
+		pcie0_dart_2: iommu@683008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x83008000 0x0 0x4000>;
 			#iommu-cells = <1>;
diff --git a/dts/src/arm64/arm/corstone1000.dtsi b/dts/src/arm64/arm/corstone1000.dtsi
index 4e46826f88..21f1f952e9 100644
--- a/dts/src/arm64/arm/corstone1000.dtsi
+++ b/dts/src/arm64/arm/corstone1000.dtsi
@@ -53,6 +53,7 @@
 
 	L2_0: l2-cache0 {
 		compatible = "cache";
+		cache-unified;
 		cache-level = <2>;
 		cache-size = <0x80000>;
 		cache-line-size = <64>;
diff --git a/dts/src/arm64/arm/foundation-v8.dtsi b/dts/src/arm64/arm/foundation-v8.dtsi
index 83e3e7e398..029578072d 100644
--- a/dts/src/arm64/arm/foundation-v8.dtsi
+++ b/dts/src/arm64/arm/foundation-v8.dtsi
@@ -58,6 +58,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -84,6 +85,11 @@
 			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	watchdog@2a440000 {
 		compatible = "arm,sbsa-gwdt";
 		reg = <0x0 0x2a440000 0 0x1000>,
diff --git a/dts/src/arm64/arm/fvp-base-revc.dts b/dts/src/arm64/arm/fvp-base-revc.dts
index 5f6f30c801..60472d65a3 100644
--- a/dts/src/arm64/arm/fvp-base-revc.dts
+++ b/dts/src/arm64/arm/fvp-base-revc.dts
@@ -47,48 +47,121 @@
 			compatible = "arm,armv8";
 			reg = <0x0 0x000>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu4: cpu@10000 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
 		};
 		cpu5: cpu@10100 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
 		};
 		cpu6: cpu@10200 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10200>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
 		};
 		cpu7: cpu@10300 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10300>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		C0_L2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		C1_L2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/dts/src/arm64/arm/juno-r1.dts b/dts/src/arm64/arm/juno-r1.dts
index 6451c62146..1d90eeebb3 100644
--- a/dts/src/arm64/arm/juno-r1.dts
+++ b/dts/src/arm64/arm/juno-r1.dts
@@ -189,6 +189,7 @@
 
 		A57_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -197,6 +198,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/dts/src/arm64/arm/juno-r2.dts b/dts/src/arm64/arm/juno-r2.dts
index 438cd1ff4b..d2ada69b0a 100644
--- a/dts/src/arm64/arm/juno-r2.dts
+++ b/dts/src/arm64/arm/juno-r2.dts
@@ -195,6 +195,7 @@
 
 		A72_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -203,6 +204,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/dts/src/arm64/arm/juno.dts b/dts/src/arm64/arm/juno.dts
index cf4a582113..5e48a01a5b 100644
--- a/dts/src/arm64/arm/juno.dts
+++ b/dts/src/arm64/arm/juno.dts
@@ -194,6 +194,7 @@
 
 		A57_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -202,6 +203,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/dts/src/arm64/arm/rtsm_ve-aemv8a.dts b/dts/src/arm64/arm/rtsm_ve-aemv8a.dts
index 258991ad7c..ef68f5aae7 100644
--- a/dts/src/arm64/arm/rtsm_ve-aemv8a.dts
+++ b/dts/src/arm64/arm/rtsm_ve-aemv8a.dts
@@ -71,6 +71,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
index 5b6d9d8e93..796cd7d02e 100644
--- a/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -57,6 +57,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi
index dac9d3b4e9..eb2a78f4e0 100644
--- a/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi
+++ b/dts/src/arm64/broadcom/bcmbca/bcm4908.dtsi
@@ -63,6 +63,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -283,6 +284,11 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
 			watchdog@28 {
 				compatible = "brcm,bcm6345-wdt";
 				reg = <0x28 0x8>;
diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi
index 3d016c2ce6..d5bc31980f 100644
--- a/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi
+++ b/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi
index 04de96bd0a..6f805266d3 100644
--- a/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi
+++ b/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi
index 13629702f7..b982249b80 100644
--- a/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi
+++ b/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi
index c3e6197be8..a996d436e9 100644
--- a/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi
+++ b/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi
index 0bce649721..62c530d4b1 100644
--- a/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi
+++ b/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi
index 29a880c6c8..34c7b513d3 100644
--- a/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi
+++ b/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi
@@ -50,6 +50,7 @@
 		};
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -109,6 +110,25 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x62000>;
 
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x640 0x18>;
diff --git a/dts/src/arm64/broadcom/northstar2/ns2-svk.dts b/dts/src/arm64/broadcom/northstar2/ns2-svk.dts
index e34172e311..fbf0392b83 100644
--- a/dts/src/arm64/broadcom/northstar2/ns2-svk.dts
+++ b/dts/src/arm64/broadcom/northstar2/ns2-svk.dts
@@ -52,7 +52,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
 };
 
diff --git a/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts b/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts
index 7bf26f3e36..699f7742ce 100644
--- a/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts
+++ b/dts/src/arm64/broadcom/northstar2/ns2-xmc.dts
@@ -49,7 +49,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
 	};
 };
 
diff --git a/dts/src/arm64/broadcom/northstar2/ns2.dtsi b/dts/src/arm64/broadcom/northstar2/ns2.dtsi
index fda97c47f4..18cdbc20f0 100644
--- a/dts/src/arm64/broadcom/northstar2/ns2.dtsi
+++ b/dts/src/arm64/broadcom/northstar2/ns2.dtsi
@@ -79,6 +79,7 @@
 
 		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/broadcom/stingray/stingray.dtsi b/dts/src/arm64/broadcom/stingray/stingray.dtsi
index 8f8c25e511..e05901abe9 100644
--- a/dts/src/arm64/broadcom/stingray/stingray.dtsi
+++ b/dts/src/arm64/broadcom/stingray/stingray.dtsi
@@ -108,18 +108,22 @@
 
 		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER1_L2: l2-cache@100 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER2_L2: l2-cache@200 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER3_L2: l2-cache@300 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-13bb.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-13bb.dtso
index f826392c23..f826392c23 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds-13bb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-13bb.dtso
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-65bb.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-65bb.dtso
index b949cac037..b949cac037 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-65bb.dtso
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-7777.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-7777.dtso
index 1dff68d748..1dff68d748 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds-7777.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-7777.dtso
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-85bb.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-85bb.dtso
index 19424d3497..19424d3497 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds-85bb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-85bb.dtso
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-899b.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-899b.dtso
index fb85847f77..fb85847f77 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds-899b.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-899b.dtso
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-9999.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-9999.dtso
index 63e46fad22..63e46fad22 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds-9999.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-9999.dtso
diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
index ac1c3a7e5f..1b33cabb4e 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -46,6 +46,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/fsl-ls1043-post.dtsi b/dts/src/arm64/freescale/fsl-ls1043-post.dtsi
index d237162a87..5c4d7eef8b 100644
--- a/dts/src/arm64/freescale/fsl-ls1043-post.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1043-post.dtsi
@@ -24,9 +24,12 @@
 
 	/* these aliases provide the FMan ports mapping */
 	enet0: ethernet@e0000 {
+		pcs-handle-names = "qsgmii";
 	};
 
 	enet1: ethernet@e2000 {
+		pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet2: ethernet@e4000 {
@@ -36,11 +39,32 @@
 	};
 
 	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet6: ethernet@f0000 {
 	};
+
+	mdio@e1000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
+	};
 };
diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi
index 704f72cadd..b9fd24cdc9 100644
--- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi
@@ -84,6 +84,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/fsl-ls1046-post.dtsi b/dts/src/arm64/freescale/fsl-ls1046-post.dtsi
index d6caaea57d..4e33450939 100644
--- a/dts/src/arm64/freescale/fsl-ls1046-post.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1046-post.dtsi
@@ -23,6 +23,8 @@
 &fman0 {
 	/* these aliases provide the FMan ports mapping */
 	enet0: ethernet@e0000 {
+		pcsphy-handle = <&qsgmiib_pcs3>;
+		pcs-handle-names = "qsgmii";
 	};
 
 	enet1: ethernet@e2000 {
@@ -35,14 +37,37 @@
 	};
 
 	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&pcsphy5>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet6: ethernet@f0000 {
 	};
 
 	enet7: ethernet@f2000 {
+		pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@eb000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
 	};
 };
diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi
index 3d9e29824b..a01e3cfec7 100644
--- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi
@@ -79,6 +79,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/fsl-ls2080a.dtsi b/dts/src/arm64/freescale/fsl-ls2080a.dtsi
index a2cadf7571..1e5d76c4d8 100644
--- a/dts/src/arm64/freescale/fsl-ls2080a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls2080a.dtsi
@@ -95,18 +95,22 @@
 
 	cluster0_l2: l2-cache0 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster1_l2: l2-cache1 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster2_l2: l2-cache2 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	CPU_PW20: cpu-pw20 {
diff --git a/dts/src/arm64/freescale/fsl-ls2088a.dtsi b/dts/src/arm64/freescale/fsl-ls2088a.dtsi
index c3dc38188c..c12c86915e 100644
--- a/dts/src/arm64/freescale/fsl-ls2088a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls2088a.dtsi
@@ -95,18 +95,22 @@
 
 	cluster0_l2: l2-cache0 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster1_l2: l2-cache1 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster2_l2: l2-cache2 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	CPU_PW20: cpu-pw20 {
diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi
index 8c76d86cb7..50c19e8405 100644
--- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi
@@ -300,6 +300,7 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -308,6 +309,7 @@
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -316,6 +318,7 @@
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -324,6 +327,7 @@
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -332,6 +336,7 @@
 
 		cluster4_l2: l2-cache4 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -340,6 +345,7 @@
 
 		cluster5_l2: l2-cache5 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -348,6 +354,7 @@
 
 		cluster6_l2: l2-cache6 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -356,6 +363,7 @@
 
 		cluster7_l2: l2-cache7 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/dts/src/arm64/freescale/imx8-ss-conn.dtsi b/dts/src/arm64/freescale/imx8-ss-conn.dtsi
index 10370d1a6c..4852760ade 100644
--- a/dts/src/arm64/freescale/imx8-ss-conn.dtsi
+++ b/dts/src/arm64/freescale/imx8-ss-conn.dtsi
@@ -34,6 +34,35 @@ conn_subsys: bus@5b000000 {
 		clock-output-names = "conn_ipg_clk";
 	};
 
+	usbotg1: usb@5b0d0000 {
+		compatible = "fsl,imx7ulp-usb";
+		reg = <0x5b0d0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy1>;
+		fsl,usbmisc = <&usbmisc1 0>;
+		clocks = <&usb2_lpcg 0>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_0>;
+		status = "disabled";
+	};
+
+	usbmisc1: usbmisc@5b0d0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0d0200 0x200>;
+	};
+
+	usbphy1: usbphy@5b100000 {
+		compatible = "fsl,imx7ulp-usbphy";
+		reg = <0x5b100000 0x1000>;
+		clocks = <&usb2_lpcg 1>;
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+		status = "disabled";
+	};
+
 	usdhc1: mmc@5b010000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
@@ -195,4 +224,14 @@ conn_subsys: bus@5b000000 {
 				     "enet1_lpcg_ipg_s_clk";
 		power-domains = <&pd IMX_SC_R_ENET_1>;
 	};
+
+	usb2_lpcg: clock-controller@5b270000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b270000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_ahb_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+	};
 };
diff --git a/dts/src/arm64/freescale/imx8-ss-dma.dtsi b/dts/src/arm64/freescale/imx8-ss-dma.dtsi
index d7b4229bb4..a943a1e279 100644
--- a/dts/src/arm64/freescale/imx8-ss-dma.dtsi
+++ b/dts/src/arm64/freescale/imx8-ss-dma.dtsi
@@ -20,6 +20,70 @@ dma_subsys: bus@5a000000 {
 		clock-output-names = "dma_ipg_clk";
 	};
 
+	lpspi0: spi@5a000000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi0_lpcg 0>,
+			 <&spi0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <20000000>;
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+		status = "disabled";
+	};
+
+	lpspi1: spi@5a010000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a010000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi1_lpcg 0>,
+			 <&spi1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+		status = "disabled";
+	};
+
+	lpspi2: spi@5a020000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi2_lpcg 0>,
+			 <&spi2_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+		status = "disabled";
+	};
+
+	lpspi3: spi@5a030000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a030000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi3_lpcg 0>,
+			 <&spi3_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+		status = "disabled";
+	};
+
 	lpuart0: serial@5a060000 {
 		reg = <0x5a060000 0x1000>;
 		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -60,6 +124,54 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	spi0_lpcg: clock-controller@5a400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi0_lpcg_clk",
+				     "spi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+	};
+
+	spi1_lpcg: clock-controller@5a410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi1_lpcg_clk",
+				     "spi1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+	};
+
+	spi2_lpcg: clock-controller@5a420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi2_lpcg_clk",
+				     "spi2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+	};
+
+	spi3_lpcg: clock-controller@5a430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi3_lpcg_clk",
+				     "spi3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+	};
+
 	uart0_lpcg: clock-controller@5a460000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a460000 0x10000>;
@@ -156,6 +268,34 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	adc0: adc@5a880000 {
+		compatible = "nxp,imx8qxp-adc";
+		reg = <0x5a880000 0x10000>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc0_lpcg 0>,
+			 <&adc0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+		status = "disabled";
+	 };
+
+	adc1: adc@5a890000 {
+		compatible = "nxp,imx8qxp-adc";
+		reg = <0x5a890000 0x10000>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc1_lpcg 0>,
+			 <&adc1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+		status = "disabled";
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;
@@ -203,4 +343,28 @@ dma_subsys: bus@5a000000 {
 				     "i2c3_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_I2C_3>;
 	};
+
+	adc0_lpcg: clock-controller@5ac80000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac80000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc0_lpcg_clk",
+				     "adc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+	};
+
+	adc1_lpcg: clock-controller@5ac90000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac90000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc1_lpcg_clk",
+				     "adc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+	};
 };
diff --git a/dts/src/arm64/freescale/imx8-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8-ss-lsio.dtsi
index 6446e6df7a..1f3d225e64 100644
--- a/dts/src/arm64/freescale/imx8-ss-lsio.dtsi
+++ b/dts/src/arm64/freescale/imx8-ss-lsio.dtsi
@@ -11,7 +11,8 @@ lsio_subsys: bus@5d000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
+		 <0x08000000 0x0 0x08000000 0x10000000>;
 
 	lsio_mem_clk: clock-lsio-mem {
 		compatible = "fixed-clock";
@@ -107,6 +108,20 @@ lsio_subsys: bus@5d000000 {
 		power-domains = <&pd IMX_SC_R_GPIO_7>;
 	};
 
+	flexspi0: spi@5d120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,imx8qxp-fspi";
+		reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
+		clock-names = "fspi", "fspi_en";
+		power-domains = <&pd IMX_SC_R_FSPI_0>;
+		status = "disabled";
+	};
+
 	lsio_mu0: mailbox@5d1b0000 {
 		reg = <0x5d1b0000 0x10000>;
 		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm64/freescale/imx8dxl-evk.dts b/dts/src/arm64/freescale/imx8dxl-evk.dts
index ca2a43e0cb..280a9c9d8b 100644
--- a/dts/src/arm64/freescale/imx8dxl-evk.dts
+++ b/dts/src/arm64/freescale/imx8dxl-evk.dts
@@ -90,6 +90,28 @@
 		enable-active-high;
 		off-on-delay-us = <3480>;
 	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	mii_select: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mii-select";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&scu_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
 };
 
 &eqos {
@@ -159,6 +181,23 @@
 	};
 };
 
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	nxp,fspi-dll-slvdly = <4>;
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &i2c2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -266,6 +305,40 @@
 	};
 };
 
+&usbphy1 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <114>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy2 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <111>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -286,6 +359,21 @@
 	status = "okay";
 };
 
+&lpspi3 {
+	fsl,spi-num-chipselects = <1>;
+	fsl,spi-only-use-cs1-sel;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <30000000>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -330,6 +418,25 @@
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
diff --git a/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi b/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi
index 795d1d472f..6881330ab4 100644
--- a/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi
+++ b/dts/src/arm64/freescale/imx8dxl-ss-adma.dtsi
@@ -11,6 +11,10 @@
 	clock-frequency = <160000000>;
 };
 
+&adc0 {
+	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &i2c0 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
@@ -50,3 +54,19 @@
 	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&lpspi0 {
+	interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi1 {
+	interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi2 {
+	interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi3 {
+	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/dts/src/arm64/freescale/imx8dxl-ss-conn.dtsi b/dts/src/arm64/freescale/imx8dxl-ss-conn.dtsi
index 69c4849f21..6b416fb760 100644
--- a/dts/src/arm64/freescale/imx8dxl-ss-conn.dtsi
+++ b/dts/src/arm64/freescale/imx8dxl-ss-conn.dtsi
@@ -140,3 +140,13 @@
 	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
 	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&usbotg1 {
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	/*
+	 * usbotg1 and usbotg2 share one clock
+	 * scfw disable clock access and keep it always on
+	 * in case other core (M4) use one of these.
+	 */
+	clocks = <&clk_dummy>;
+};
diff --git a/dts/src/arm64/freescale/imx8dxl-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8dxl-ss-lsio.dtsi
index 815bd987b0..5f4f789e4a 100644
--- a/dts/src/arm64/freescale/imx8dxl-ss-lsio.dtsi
+++ b/dts/src/arm64/freescale/imx8dxl-ss-lsio.dtsi
@@ -3,44 +3,90 @@
  * Copyright 2019~2020, 2022 NXP
  */
 
+&flexspi0 {
+	compatible = "nxp,imx8dxl-fspi";
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &lsio_gpio0 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 47 13>,
+		      <&iomuxc 13 61 4>,
+		      <&iomuxc 19 67 4>,
+		      <&iomuxc 24 72 1>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 4 74 5>,
+		      <&iomuxc 9 80 16>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 1 98 2>,
+		      <&iomuxc 3 101 1>,
+		      <&iomuxc 5 107 8>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 115 4>,
+		      <&iomuxc 9 121 1>,
+		      <&iomuxc 10 120 1>,
+		      <&iomuxc 11 123 1>,
+		      <&iomuxc 12 122 1>,
+		      <&iomuxc 13 125 1>,
+		      <&iomuxc 14 124 1>,
+		      <&iomuxc 16 126 1>,
+		      <&iomuxc 17 128 1>,
+		      <&iomuxc 18 131 1>,
+		      <&iomuxc 19 130 1>,
+		      <&iomuxc 20 133 1>,
+		      <&iomuxc 21 132 1>,
+		      <&iomuxc 22 129 1>,
+		      <&iomuxc 23 134 1>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 12>,
+		      <&iomuxc 19 22 2>,
+		      <&iomuxc 21 25 2>,
+		      <&iomuxc 29 29 3>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 32 3>,
+		      <&iomuxc 3 36 6>,
+		      <&iomuxc 9 43 3>;
 };
 
 &lsio_gpio6 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 53 7>,
+		      <&iomuxc 8 86 10>,
+		      <&iomuxc 19 107 8>;
 };
 
 &lsio_gpio7 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 8 22 2>,
+		      <&iomuxc 10 25 2>,
+		      <&iomuxc 16 44 2>;
 };
 
 &lsio_mu0 {
diff --git a/dts/src/arm64/freescale/imx8dxl.dtsi b/dts/src/arm64/freescale/imx8dxl.dtsi
index 5ddbda0b4d..0c64b91946 100644
--- a/dts/src/arm64/freescale/imx8dxl.dtsi
+++ b/dts/src/arm64/freescale/imx8dxl.dtsi
@@ -59,6 +59,7 @@
 
 		A35_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -133,6 +134,12 @@
 			clock-names = "xtal_32KHz", "xtal_24Mhz";
 		};
 
+		scu_gpio: gpio {
+			compatible = "fsl,imx8qxp-sc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		iomuxc: pinctrl {
 			compatible = "fsl,imx8dxl-iomuxc";
 		};
diff --git a/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi b/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi
index cf07987ccc..201325f566 100644
--- a/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi
@@ -47,15 +47,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts b/dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts
index 778bdbe228..24f61db33e 100644
--- a/dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/dts/src/arm64/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -46,6 +46,12 @@
 		clock-frequency = <25000000>;
 	};
 
+	clk_xtal32k: clk-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	panel: panel {
 		backlight = <&backlight>;
 		power-supply = <&reg_panel_vcc>;
@@ -77,12 +83,11 @@
 		enable-active-high;
 	};
 
-	watchdog-gpio {
+	watchdog {
 		/* TPS3813 */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_watchdog_gpio>;
 		compatible = "linux,wdt-gpio";
-		always-enabled;
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		hw_algo = "level";
 		/* Reset triggers in 2..3 seconds */
@@ -114,15 +119,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -183,8 +188,6 @@
 			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <10000>;
-			qca,clk-out-frequency = <125000000>;
-			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
 			qca,keep-pll-enabled;
 			vddio-supply = <&vddio>;
 
@@ -271,6 +274,9 @@
 	pmic: pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		#clock-cells = <0>;
+		clocks = <&clk_xtal32k 0>;
+		clock-output-names = "clk-32k-out";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
@@ -928,6 +934,10 @@
 	status = "disabled";
 };
 
+&snvs_rtc {
+	clocks = <&pmic>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/dts/src/arm64/freescale/imx8mm-evk.dts b/dts/src/arm64/freescale/imx8mm-evk.dts
index a2b24d4d4e..b68954bcc3 100644
--- a/dts/src/arm64/freescale/imx8mm-evk.dts
+++ b/dts/src/arm64/freescale/imx8mm-evk.dts
@@ -23,15 +23,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mm-evk.dtsi b/dts/src/arm64/freescale/imx8mm-evk.dtsi
index 7d6317d95b..e0b604ac0d 100644
--- a/dts/src/arm64/freescale/imx8mm-evk.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-evk.dtsi
@@ -56,6 +56,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
@@ -343,6 +344,7 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&buck4_reg>;
 	};
 };
 
@@ -399,6 +401,10 @@
 	status = "okay";
 };
 
+&usbphynop1 {
+	wakeup-source;
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
diff --git a/dts/src/arm64/freescale/imx8mm-innocomm-wb15-evk.dts b/dts/src/arm64/freescale/imx8mm-innocomm-wb15-evk.dts
new file mode 100644
index 0000000000..055faae799
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mm-innocomm-wb15-evk.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ * Copyright 2022 Pengutronix
+ */
+
+/dts-v1/;
+
+#include "imx8mm-innocomm-wb15.dtsi"
+
+/ {
+	model = "InnoComm WB15-EVK";
+	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			label = "debug";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ethphy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fec_phy_reg>;
+		regulator-name = "PHY_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			phy-supply = <&reg_ethphy>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec_phy: fec-phy-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec_phy_reg: fec-phy-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x16
+		>;
+	};
+
+	pinctrl_gpio_leds: led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0xd6
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mm-innocomm-wb15.dtsi b/dts/src/arm64/freescale/imx8mm-innocomm-wb15.dtsi
new file mode 100644
index 0000000000..44e87b1568
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mm-innocomm-wb15.dtsi
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	reg_modem: regulator-modem {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_regulator>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "epdev_on";
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_out: regulator-3v3-out {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_OUT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <850000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <850000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// buck5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// buck6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// buck7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// buck8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	fsl,max-link-speed = <1>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4349-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_bt>;
+		device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_out>;
+		vddio-supply = <&reg_3v3_out>;
+		clocks = <&osc_32k>;
+		max-speed = <3000000>;
+		clock-names = "extclk";
+	};
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x6
+		>;
+	};
+
+	pinctrl_modem_bt: modem-bt-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_modem_regulator: modem-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x41
+		>;
+	};
+
+	pinctrl_pmic: pmic-irq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi b/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi
index 8d10f5b412..5172883717 100644
--- a/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi
@@ -47,11 +47,11 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi b/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi
index 0679728d24..1f8326613e 100644
--- a/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-kontron-sl.dtsi
@@ -46,11 +46,11 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mm-phg.dts b/dts/src/arm64/freescale/imx8mm-phg.dts
new file mode 100644
index 0000000000..e9447738b1
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mm-phg.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Fabio Estevam <festevam@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+
+/ {
+	model = "Cloos i.MX8MM PHG board";
+	compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "status1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "status2";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "status3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "run";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "powerled";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	power-domains = <&pgc_otg1>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x14
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x14
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x14
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x14
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x14
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x10
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x119
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mm-phycore-som.dtsi b/dts/src/arm64/freescale/imx8mm-phycore-som.dtsi
index 995b44efb1..92616bc4f7 100644
--- a/dts/src/arm64/freescale/imx8mm-phycore-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-phycore-som.dtsi
@@ -53,15 +53,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mm-var-som.dtsi b/dts/src/arm64/freescale/imx8mm-var-som.dtsi
index a0bd540f27..ae0721b807 100644
--- a/dts/src/arm64/freescale/imx8mm-var-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-var-som.dtsi
@@ -53,15 +53,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi b/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi
index 66a0d103c9..9e7d388721 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi
@@ -81,15 +81,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -119,8 +119,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -365,8 +368,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	eeprom@52 {
@@ -435,6 +441,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -442,6 +455,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-imx219.dts b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
index 4eaf8aabcb..4eaf8aabcb 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-imx219.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
index 3ea73a6886..3ea73a6886 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs422.dts b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
index c3cd9f2b0d..c3cd9f2b0d 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs422.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs485.dts b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
index cc0a287226..cc0a287226 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs485.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-imx219.dts b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
index f3ece4b7fb..f3ece4b7fb 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-imx219.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
index 2fa635e1c1..2fa635e1c1 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs422.dts b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
index 3e6404340d..3e6404340d 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs422.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs485.dts b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
index 2c71ab9854..2c71ab9854 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts
index d3ee6fc4ba..750a1f07ec 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts
@@ -248,15 +248,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -326,8 +326,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -477,8 +480,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -600,8 +606,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	leds_gpio: gpio@20 {
@@ -673,8 +682,11 @@
 
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -852,6 +864,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -859,6 +878,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -866,6 +892,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -873,6 +906,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_ksz: kszgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x41
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts
index 31f4c735fe..32872b0b1a 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts
@@ -198,15 +198,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -261,7 +261,7 @@
 
 &gpio1 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -283,7 +283,8 @@
 &gpio4 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 		"", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
-		"", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485",
+		"lte_pwr#", "lte_rst", "lte_int", "",
+		"amp_gpio4", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
 		"", "uart1_term", "uart1_half", "app_gpio2",
 		"mipi_gpio1", "", "", "";
 };
@@ -298,8 +299,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -566,8 +570,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -585,16 +592,22 @@
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -738,14 +751,19 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
 			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18       0x40000041 /* LTE_INT */
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17       0x40000041 /* LTE_RST# */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16       0x40000041 /* LTE_PWR */
 			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */
 			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x40000041 /* AMP GPIO2 */
 			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x40000041 /* AMP GPIO3 */
 			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20	0x40000041 /* AMP_GPIO4 */
 			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
 			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
 			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
@@ -779,8 +797,6 @@
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
 			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
 			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
-			MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN	0x141
-			MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT	0x141
 		>;
 	};
 
@@ -797,6 +813,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -804,6 +827,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -811,6 +841,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -818,6 +855,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts
index 19f6d2943d..8ce562246a 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts
@@ -207,15 +207,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -265,8 +265,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -397,8 +400,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -520,8 +526,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -681,6 +690,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -688,6 +704,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -695,6 +718,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7904.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7904.dts
index a67771d021..eceed9816f 100644
--- a/dts/src/arm64/freescale/imx8mm-venice-gw7904.dts
+++ b/dts/src/arm64/freescale/imx8mm-venice-gw7904.dts
@@ -266,15 +266,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -315,8 +315,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -441,8 +444,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -564,8 +570,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -582,8 +591,11 @@
 
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gpioled: gpio@27 {
@@ -738,6 +750,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -745,6 +764,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -752,6 +778,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -759,6 +792,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_pcie0: pciegrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
diff --git a/dts/src/arm64/freescale/imx8mm-verdin.dtsi b/dts/src/arm64/freescale/imx8mm-verdin.dtsi
index bcab830c6e..0d454e0e2f 100644
--- a/dts/src/arm64/freescale/imx8mm-verdin.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-verdin.dtsi
@@ -3,8 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/phy/phy-imx8-pcie.h"
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
 
 / {
@@ -183,15 +183,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -610,7 +610,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio3>;
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
@@ -653,7 +653,8 @@
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 				 <&clk IMX8MM_SYS_PLL2_250M>;
 	assigned-clock-rates = <10000000>, <250000000>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>,
 		 <&clk IMX8MM_CLK_PCIE1_PHY>;
 	clock-names = "pcie", "pcie_aux", "pcie_bus";
 	pinctrl-names = "default";
@@ -664,6 +665,7 @@
 
 &pcie_phy {
 	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	clock-names = "ref";
 	fsl,clkreq-unsupported;
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
 	fsl,tx-deemph-gen1 = <0x2d>;
diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi
index 50ef92915c..4ee89fdcf5 100644
--- a/dts/src/arm64/freescale/imx8mm.dtsi
+++ b/dts/src/arm64/freescale/imx8mm.dtsi
@@ -139,6 +139,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
@@ -575,9 +576,10 @@
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mm-anatop", "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
diff --git a/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi b/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi
index 1133cded9b..8a4369d389 100644
--- a/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi
@@ -55,15 +55,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts b/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts
index d8ce217c60..5110d59b71 100644
--- a/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts
+++ b/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts
@@ -35,15 +35,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-600M {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mn-evk.dts b/dts/src/arm64/freescale/imx8mn-evk.dts
index 4eb467df5b..4839a962a1 100644
--- a/dts/src/arm64/freescale/imx8mn-evk.dts
+++ b/dts/src/arm64/freescale/imx8mn-evk.dts
@@ -47,6 +47,7 @@
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <750000>;
 			};
 
 			buck2: BUCK2 {
@@ -56,8 +57,6 @@
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <950000>;
-				nxp,dvs-standby-voltage = <850000>;
 			};
 
 			buck4: BUCK4{
diff --git a/dts/src/arm64/freescale/imx8mn-evk.dtsi b/dts/src/arm64/freescale/imx8mn-evk.dtsi
index 261c365400..8fef980c4a 100644
--- a/dts/src/arm64/freescale/imx8mn-evk.dtsi
+++ b/dts/src/arm64/freescale/imx8mn-evk.dtsi
@@ -36,6 +36,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
 
@@ -159,8 +160,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	ptn5110: tcpc@50 {
@@ -195,8 +199,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	pca6416: gpio@20 {
@@ -240,6 +247,15 @@
 	status = "okay";
 };
 
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -255,6 +271,10 @@
 	status = "okay";
 };
 
+&usbphynop1 {
+	wakeup-source;
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
@@ -369,6 +389,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2grp-gpio {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x1c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x1c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -376,6 +403,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3grp-gpio {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x1c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x1c3
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
@@ -419,6 +453,15 @@
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts b/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts
index dd4302ac1d..b9444e4a3d 100644
--- a/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts
+++ b/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts
@@ -189,15 +189,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -256,7 +256,7 @@
 
 &gpio1 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -278,7 +278,7 @@
 &gpio4 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "app_gpio1", "", "uart1_rs485",
+		"", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
 		"", "uart1_term", "uart1_half", "app_gpio2",
 		"mipi_gpio1", "", "", "";
 };
@@ -297,8 +297,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -565,8 +568,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -584,16 +590,22 @@
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -689,10 +701,12 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
 			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
 			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
 			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
 			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
 			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
@@ -726,8 +740,6 @@
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
 			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
 			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
-			MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN	0x141
-			MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT	0x141
 		>;
 	};
 
@@ -744,6 +756,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -751,6 +770,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -758,6 +784,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -765,6 +798,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi
index 67b554ba69..b7d91df71c 100644
--- a/dts/src/arm64/freescale/imx8mn.dtsi
+++ b/dts/src/arm64/freescale/imx8mn.dtsi
@@ -139,6 +139,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
@@ -576,10 +577,10 @@
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
-					     "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
diff --git a/dts/src/arm64/freescale/imx8mp-dhcom-som.dtsi b/dts/src/arm64/freescale/imx8mp-dhcom-som.dtsi
index 0f13ee3627..6e1192e751 100644
--- a/dts/src/arm64/freescale/imx8mp-dhcom-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mp-dhcom-som.dtsi
@@ -427,6 +427,24 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	uart-has-rtscts;
 	status = "okay";
+
+	/*
+	 * PLL3 at 320 MHz supplies UART2 root with 64 MHz clock,
+	 * which with 16x oversampling yields 4 Mbdps baud base,
+	 * which is exactly the maximum rate supported by muRata
+	 * 2AE bluetooth UART.
+	 */
+	assigned-clocks = <&clk IMX8MP_SYS_PLL3>, <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <0>, <&clk IMX8MP_SYS_PLL3_OUT>;
+	assigned-clock-rates = <320000000>, <64000000>;
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart2_bt>;
+		compatible = "cypress,cyw4373a0-bt";
+		shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+	};
 };
 
 &uart3 {
@@ -849,6 +867,13 @@
 		>;
 	};
 
+	pinctrl_uart2_bt: dhcom-uart2-bt-grp {
+		fsl,pins = <
+			/* BT_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
+		>;
+	};
+
 	pinctrl_uart3: dhcom-uart3-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x49
@@ -886,8 +911,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
 			/* WL_REG_EN */
 			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
@@ -901,8 +924,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
 			/* WL_REG_EN */
 			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
@@ -916,8 +937,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
 			/* WL_REG_EN */
 			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
diff --git a/dts/src/arm64/freescale/imx8mp-evk.dts b/dts/src/arm64/freescale/imx8mp-evk.dts
index b4c1ef2559..d4c7ca16ab 100644
--- a/dts/src/arm64/freescale/imx8mp-evk.dts
+++ b/dts/src/arm64/freescale/imx8mp-evk.dts
@@ -85,6 +85,20 @@
 	};
 };
 
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
 &A53_0 {
 	cpu-supply = <&reg_arm>;
 };
@@ -317,6 +331,13 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
 &i2c3 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -390,10 +411,37 @@
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &uart2 {
 	/* console */
 	pinctrl-names = "default";
@@ -416,6 +464,15 @@
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &usdhc2 {
 	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
 	assigned-clock-rates = <400000000>;
@@ -515,6 +572,17 @@
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
 	pinctrl_gpio_led: gpioledgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
@@ -528,6 +596,13 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
@@ -567,12 +642,39 @@
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
@@ -586,6 +688,15 @@
 		>;
 	};
 
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
diff --git a/dts/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/dts/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 7bf6f81e87..6357f3d96c 100644
--- a/dts/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/dts/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mp-tqma8mpql.dtsi"
 
@@ -48,6 +49,27 @@
 		status = "disabled";
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -108,6 +130,18 @@
 		status = "disabled";
 	};
 
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpwmfan>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_12v0>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -165,6 +199,47 @@
 			linux,cma-default;
 		};
 	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				soc_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				soc_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				soc_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&soc_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&soc_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&soc_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
 };
 
 &ecspi1 {
@@ -340,9 +415,16 @@
 			  "", "", "", "",
 			  "", "", "", "",
 			  "", "", "DP_IRQ", "DSI_EN",
-			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
+			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
 			  "", "", "", "FAN_PWR",
 			  "RTC_EVENT#", "CODEC_RST#", "", "";
+
+	pcie-refclkreq-hog {
+		gpio-hog;
+		gpios = <22 0>;
+		output-high;
+		line-name = "PCIE_REFCLK_OE#";
+	};
 };
 
 &gpio5 {
@@ -377,6 +459,13 @@
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc_3v3>;
 	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c4 {
@@ -407,6 +496,25 @@
 	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
@@ -461,11 +569,23 @@
 	status = "okay";
 };
 
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb3_phy0 {
 	vbus-supply = <&reg_vcc_5v0>;
 	status = "okay";
 };
 
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
 &usb_dwc3_0 {
 	/* dual role is implemented, but not a full featured OTG */
 	hnp-disable;
@@ -486,6 +606,31 @@
 	};
 };
 
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -685,10 +830,18 @@
 		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
 	};
 
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>; /* FAN RPM */
+	};
+
 	pinctrl_reg12v0: reg12v0grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
 	};
 
+	pinctrl_regpwmfan: regpwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x80>;
+	};
+
 	/* X61 */
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,
@@ -720,6 +873,10 @@
 		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c0>;
 	};
 
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x10>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
 			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
diff --git a/dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts b/dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts
index 06b4c93c58..ceeca4966f 100644
--- a/dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts
+++ b/dts/src/arm64/freescale/imx8mp-venice-gw74xx.dts
@@ -253,8 +253,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -477,8 +480,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -556,16 +562,22 @@
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -800,6 +812,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
@@ -807,6 +826,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
@@ -814,6 +840,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c2
@@ -821,6 +854,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_ksz: kszgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x150 /* IRQ# */
diff --git a/dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi b/dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
index 4b8f86f630..80db1ad7c2 100644
--- a/dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/dts/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
@@ -116,6 +116,7 @@
 
 /* Verdin USB_2 */
 &usb3_1 {
+	fsl,permanently-attached;
 	status = "okay";
 };
 
diff --git a/dts/src/arm64/freescale/imx8mp-verdin.dtsi b/dts/src/arm64/freescale/imx8mp-verdin.dtsi
index 5dcd1de586..6a1890a4b5 100644
--- a/dts/src/arm64/freescale/imx8mp-verdin.dtsi
+++ b/dts/src/arm64/freescale/imx8mp-verdin.dtsi
@@ -3,7 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -678,8 +679,8 @@
 		status = "disabled";
 	};
 
-	lvds_ti_sn65dsi83: bridge@2c {
-		compatible = "ti,sn65dsi83";
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
 		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
@@ -712,7 +713,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio4>;
 		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
@@ -806,28 +807,45 @@
 };
 
 /* Verdin USB_1 */
-&usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
+&usb3_0 {
+	fsl,disable-port-power-control;
+	fsl,over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_1_oc_n>;
 };
 
 &usb_dwc3_0 {
+	/* dual role only, not full featured OTG */
 	adp-disable;
 	dr_mode = "otg";
 	hnp-disable;
 	maximum-speed = "high-speed";
-	over-current-active-low;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_1_id>;
+	role-switch-default-mode = "peripheral";
 	srp-disable;
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+	};
 };
 
 /* Verdin USB_2 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
 &usb3_phy1 {
 	vbus-supply = <&reg_usb2_vbus>;
 };
 
 &usb_dwc3_1 {
-	disable-over-current;
 	dr_mode = "host";
 };
 
@@ -1045,7 +1063,6 @@
 
 	pinctrl_gpio_hog3: gpiohog3grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x1c4>,	/* SODIMM 157 */
 			/* CSI_1_MCLK */
 			<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x1c4>;	/* SODIMM 91 */
 	};
@@ -1220,7 +1237,7 @@
 
 	pinctrl_usb1_vbus: usb1vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x19>;	/* SODIMM 155 */
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x106>;	/* SODIMM 155 */
 	};
 
 	/* USB_1_ID */
@@ -1229,9 +1246,15 @@
 			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>;	/* SODIMM 161 */
 	};
 
+	/* USB_1_OC# */
+	pinctrl_usb_1_oc_n: usb1ocngrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c4>;	/* SODIMM 157 */
+	};
+
 	pinctrl_usb2_vbus: usb2vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x19>;	/* SODIMM 185 */
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x106>;	/* SODIMM 185 */
 	};
 
 	/* On-module Wi-Fi */
diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi
index bb916a0948..7a6e6221f4 100644
--- a/dts/src/arm64/freescale/imx8mp.dtsi
+++ b/dts/src/arm64/freescale/imx8mp.dtsi
@@ -123,6 +123,7 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-level = <2>;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
@@ -441,10 +442,10 @@
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
-					     "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -631,6 +632,14 @@
 						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
 						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 					};
+
+					pgc_mlmix: power-domain@24 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+					};
 				};
 			};
 		};
@@ -705,12 +714,15 @@
 			ecspi1: spi@30820000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30820000 0x10000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
 					 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
 				clock-names = "ipg", "per";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
 				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
 				dma-names = "rx", "tx";
 				status = "disabled";
@@ -719,12 +731,15 @@
 			ecspi2: spi@30830000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30830000 0x10000>;
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
 					 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
 				clock-names = "ipg", "per";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
 				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
 				dma-names = "rx", "tx";
 				status = "disabled";
@@ -733,12 +748,15 @@
 			ecspi3: spi@30840000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30840000 0x10000>;
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
 					 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
 				clock-names = "ipg", "per";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
 				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
 				dma-names = "rx", "tx";
 				status = "disabled";
@@ -1063,11 +1081,11 @@
 			noc_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-200M {
+				opp-200000000 {
 					opp-hz = /bits/ 64 <200000000>;
 				};
 
-				opp-1000M {
+				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 				};
 			};
diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts
index 82387b9cb8..78937910f4 100644
--- a/dts/src/arm64/freescale/imx8mq-evk.dts
+++ b/dts/src/arm64/freescale/imx8mq-evk.dts
@@ -46,6 +46,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
@@ -163,22 +164,22 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
 		/*
 		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
 		 */
-		opp-166M {
+		opp-166000000 {
 			opp-hz = /bits/ 64 <166935483>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b..4c8904fba1 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts
+++ b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts
@@ -7,6 +7,7 @@
 
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "dt-bindings/pwm/pwm.h"
 #include "dt-bindings/usb/pd.h"
 #include "imx8mq.dtsi"
@@ -61,14 +62,13 @@
 	};
 
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
+		compatible = "pwm-leds";
 
 		led1 {
-			label = "LED 1";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 	};
 
@@ -615,9 +615,9 @@
 		>;
 	};
 
-	pinctrl_gpio_leds: gpioledgrp {
+	pinctrl_pwm_led: pwmledgrp {
 		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x16
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
 		>;
 	};
 
@@ -920,6 +920,12 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_led>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
index ae08556b2e..ddf0e330dc 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5.dtsi
+++ b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
@@ -311,15 +311,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
diff --git a/dts/src/arm64/freescale/imx8mq-tqma8mq.dtsi b/dts/src/arm64/freescale/imx8mq-tqma8mq.dtsi
index 802ad6e5ce..9a95e30fb4 100644
--- a/dts/src/arm64/freescale/imx8mq-tqma8mq.dtsi
+++ b/dts/src/arm64/freescale/imx8mq-tqma8mq.dtsi
@@ -220,12 +220,14 @@
 		reg = <0x53>;
 		pagesize = <16>;
 		read-only;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 
 	eeprom0: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 };
 
diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi
index 19eaa52356..7ce99c084e 100644
--- a/dts/src/arm64/freescale/imx8mq.dtsi
+++ b/dts/src/arm64/freescale/imx8mq.dtsi
@@ -179,6 +179,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -605,10 +606,11 @@
 				};
 			};
 
-			anatop: syscon@30360000 {
-				compatible = "fsl,imx8mq-anatop", "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mq-anatop";
 				reg = <0x30360000 0x10000>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -1184,7 +1186,7 @@
 			};
 
 			csi1: csi@30a90000 {
-				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx8mq-csi";
 				reg = <0x30a90000 0x10000>;
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
@@ -1236,7 +1238,7 @@
 			};
 
 			csi2: csi@30b80000 {
-				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx8mq-csi";
 				reg = <0x30b80000 0x10000>;
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
@@ -1356,15 +1358,15 @@
 			noc_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-133M {
+				opp-133000000 {
 					opp-hz = /bits/ 64 <133333333>;
 				};
 
-				opp-400M {
+				opp-400000000 {
 					opp-hz = /bits/ 64 <400000000>;
 				};
 
-				opp-800M {
+				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 				};
 			};
diff --git a/dts/src/arm64/freescale/imx8qm-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8qm-ss-lsio.dtsi
index 669aa14ce9..b483134f84 100644
--- a/dts/src/arm64/freescale/imx8qm-ss-lsio.dtsi
+++ b/dts/src/arm64/freescale/imx8qm-ss-lsio.dtsi
@@ -6,30 +6,68 @@
 
 &lsio_gpio0 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 6>,
+		      <&iomuxc 6 7 22>,
+		      <&iomuxc 28 36 4>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 4>,
+		      <&iomuxc 4 50 12>,
+		      <&iomuxc 16 63 8>,
+		      <&iomuxc 24 72 8>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 80 4>,
+		      <&iomuxc 4 85 18>,
+		      <&iomuxc 22 104 10>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 114 2>,
+		      <&iomuxc 2 117 16>,
+		      <&iomuxc 18 141 1>,
+		      <&iomuxc 19 140 1>,
+		      <&iomuxc 20 139 1>,
+		      <&iomuxc 21 138 1>,
+		      <&iomuxc 22 137 1>,
+		      <&iomuxc 23 136 1>,
+		      <&iomuxc 24 135 1>,
+		      <&iomuxc 25 134 1>,
+		      <&iomuxc 26 142 3>,
+		      <&iomuxc 29 146 3>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 149 3>,
+		      <&iomuxc 3 153 4>,
+		      <&iomuxc 7 158 6>,
+		      <&iomuxc 13 165 6>,
+		      <&iomuxc 19 172 8>,
+		      <&iomuxc 27 198 5>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 203 1>,
+		      <&iomuxc 1 205 2>,
+		      <&iomuxc 3 210 11>,
+		      <&iomuxc 14 223 3>,
+		      <&iomuxc 17 227 2>,
+		      <&iomuxc 19 230 5>,
+		      <&iomuxc 24 236 6>,
+		      <&iomuxc 30 243 2>;
 };
 
 &lsio_gpio6 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 245 10>,
+		      <&iomuxc 10 256 12>;
 };
 
 &lsio_gpio7 {
diff --git a/dts/src/arm64/freescale/imx8qm.dtsi b/dts/src/arm64/freescale/imx8qm.dtsi
index c9c2b65362..41ce8336f2 100644
--- a/dts/src/arm64/freescale/imx8qm.dtsi
+++ b/dts/src/arm64/freescale/imx8qm.dtsi
@@ -136,6 +136,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -144,6 +145,7 @@
 		A72_L2: l2-cache1 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi b/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi
index a08e70fb7c..7c334b93db 100644
--- a/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -3,7 +3,7 @@
  * Copyright 2019 Toradex
  */
 
-#include "dt-bindings/input/linux-event-codes.h"
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	aliases {
diff --git a/dts/src/arm64/freescale/imx8qxp-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8qxp-ss-lsio.dtsi
index 8e2152c6eb..8f722b1dd0 100644
--- a/dts/src/arm64/freescale/imx8qxp-ss-lsio.dtsi
+++ b/dts/src/arm64/freescale/imx8qxp-ss-lsio.dtsi
@@ -6,26 +6,51 @@
 
 &lsio_gpio0 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 1 56 12>,
+		      <&iomuxc 13 69 4>,
+		      <&iomuxc 19 75 4>,
+		      <&iomuxc 24 80 1>,
+		      <&iomuxc 25 82 7>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 89 9>,
+		      <&iomuxc 9 99 16>,
+		      <&iomuxc 25 116 7>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 123 1>,
+		      <&iomuxc 1 126 2>,
+		      <&iomuxc 3 129 1>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 146 4>,
+		      <&iomuxc 4 151 13>,
+		      <&iomuxc 17 165 8>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 6>,
+		      <&iomuxc 13 16 6>,
+		      <&iomuxc 19 23 2>,
+		      <&iomuxc 21 26 2>,
+		      <&iomuxc 23 30 6>,
+		      <&iomuxc 29 37 3>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 3>,
+		      <&iomuxc 3 44 6>,
+		      <&iomuxc 9 51 3>;
 };
 
 &lsio_gpio6 {
diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi
index f4ea18bb95..85c0b1d2ba 100644
--- a/dts/src/arm64/freescale/imx8qxp.dtsi
+++ b/dts/src/arm64/freescale/imx8qxp.dtsi
@@ -127,6 +127,7 @@
 		A35_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/dts/src/arm64/freescale/imx8ulp.dtsi b/dts/src/arm64/freescale/imx8ulp.dtsi
index 06ce5f19aa..32193a43ff 100644
--- a/dts/src/arm64/freescale/imx8ulp.dtsi
+++ b/dts/src/arm64/freescale/imx8ulp.dtsi
@@ -51,6 +51,7 @@
 
 		A35_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/imx93.dtsi b/dts/src/arm64/freescale/imx93.dtsi
index 0247866fc8..5d79663b3b 100644
--- a/dts/src/arm64/freescale/imx93.dtsi
+++ b/dts/src/arm64/freescale/imx93.dtsi
@@ -17,6 +17,10 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
 		i2c0 = &lpi2c1;
 		i2c1 = &lpi2c2;
 		i2c2 = &lpi2c3;
@@ -135,6 +139,7 @@
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x44230000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
 				#mbox-cells = <2>;
 				status = "disabled";
 			};
@@ -145,6 +150,15 @@
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&osc_24m>;
 				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
 			};
 
 			lpi2c1: i2c@44340000 {
@@ -270,10 +284,35 @@
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x42440000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
 				#mbox-cells = <2>;
 				status = "disabled";
 			};
 
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
@@ -294,6 +333,30 @@
 				status = "disabled";
 			};
 
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 			lpuart3: serial@42570000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42570000 0x1000>;
@@ -388,6 +451,54 @@
 				status = "disabled";
 			};
 
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 		};
 
 		aips3: bus@42800000 {
diff --git a/dts/src/arm64/freescale/mba8mx.dtsi b/dts/src/arm64/freescale/mba8mx.dtsi
index 104bdd4e43..daa37adeff 100644
--- a/dts/src/arm64/freescale/mba8mx.dtsi
+++ b/dts/src/arm64/freescale/mba8mx.dtsi
@@ -215,6 +215,7 @@
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3>;
 	};
 };
 
diff --git a/dts/src/arm64/freescale/s32g2.dtsi b/dts/src/arm64/freescale/s32g2.dtsi
index 824d401e7a..d8c82da88c 100644
--- a/dts/src/arm64/freescale/s32g2.dtsi
+++ b/dts/src/arm64/freescale/s32g2.dtsi
@@ -52,10 +52,12 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/s32v234.dtsi b/dts/src/arm64/freescale/s32v234.dtsi
index ba0b5305d4..3e306218d5 100644
--- a/dts/src/arm64/freescale/s32v234.dtsi
+++ b/dts/src/arm64/freescale/s32v234.dtsi
@@ -61,10 +61,12 @@
 
 		cluster0_l2_cache: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2_cache: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/hisilicon/hi3660.dtsi b/dts/src/arm64/hisilicon/hi3660.dtsi
index 8343d0cedd..a57f35eb5e 100644
--- a/dts/src/arm64/hisilicon/hi3660.dtsi
+++ b/dts/src/arm64/hisilicon/hi3660.dtsi
@@ -203,10 +203,12 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		A73_L2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/hisilicon/hi6220.dtsi b/dts/src/arm64/hisilicon/hi6220.dtsi
index ae0a7cfeeb..f6d3202b0d 100644
--- a/dts/src/arm64/hisilicon/hi6220.dtsi
+++ b/dts/src/arm64/hisilicon/hi6220.dtsi
@@ -186,10 +186,12 @@
 
 		CLUSTER0_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER1_L2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/hisilicon/hip05.dtsi b/dts/src/arm64/hisilicon/hip05.dtsi
index 7b2abd10d3..5b2b1bfd0d 100644
--- a/dts/src/arm64/hisilicon/hip05.dtsi
+++ b/dts/src/arm64/hisilicon/hip05.dtsi
@@ -211,18 +211,22 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/hisilicon/hip06.dtsi b/dts/src/arm64/hisilicon/hip06.dtsi
index 2f8b03b0d3..291c2ee382 100644
--- a/dts/src/arm64/hisilicon/hip06.dtsi
+++ b/dts/src/arm64/hisilicon/hip06.dtsi
@@ -211,18 +211,22 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/hisilicon/hip07.dtsi b/dts/src/arm64/hisilicon/hip07.dtsi
index 1a16662f88..b8746fb959 100644
--- a/dts/src/arm64/hisilicon/hip07.dtsi
+++ b/dts/src/arm64/hisilicon/hip07.dtsi
@@ -842,66 +842,82 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster4_l2: l2-cache4 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster5_l2: l2-cache5 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster6_l2: l2-cache6 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster7_l2: l2-cache7 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster8_l2: l2-cache8 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster9_l2: l2-cache9 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster10_l2: l2-cache10 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster11_l2: l2-cache11 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster12_l2: l2-cache12 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster13_l2: l2-cache13 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster14_l2: l2-cache14 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster15_l2: l2-cache15 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/intel/socfpga_agilex.dtsi b/dts/src/arm64/intel/socfpga_agilex.dtsi
index 7bbec8aafa..849b46dd80 100644
--- a/dts/src/arm64/intel/socfpga_agilex.dtsi
+++ b/dts/src/arm64/intel/socfpga_agilex.dtsi
@@ -313,6 +313,7 @@
 				 <&clkmgr AGILEX_SDMMC_CLK>;
 			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm64/intel/socfpga_agilex_socdk.dts b/dts/src/arm64/intel/socfpga_agilex_socdk.dts
index 26cd3c1217..07c3f88766 100644
--- a/dts/src/arm64/intel/socfpga_agilex_socdk.dts
+++ b/dts/src/arm64/intel/socfpga_agilex_socdk.dts
@@ -83,6 +83,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/dts/src/arm64/intel/socfpga_n5x_socdk.dts b/dts/src/arm64/intel/socfpga_n5x_socdk.dts
index 62c66e52b6..08c0885712 100644
--- a/dts/src/arm64/intel/socfpga_n5x_socdk.dts
+++ b/dts/src/arm64/intel/socfpga_n5x_socdk.dts
@@ -74,6 +74,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi
index 44ed6f963b..7308f7b6b2 100644
--- a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi
+++ b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi
@@ -49,6 +49,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/marvell/armada-3720-turris-mox.dts b/dts/src/arm64/marvell/armada-3720-turris-mox.dts
index ada164d423..cd09883176 100644
--- a/dts/src/arm64/marvell/armada-3720-turris-mox.dts
+++ b/dts/src/arm64/marvell/armada-3720-turris-mox.dts
@@ -125,9 +125,12 @@
 	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
+	/* MCP7940MT-I/MNY RTC */
 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 0>; /* GPIO2_5 */
 	};
 };
 
@@ -136,6 +139,7 @@
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 	status = "okay";
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	slot-power-limit-milliwatt = <10000>;
 	/*
 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi
index df152c7227..e300145ad1 100644
--- a/dts/src/arm64/marvell/armada-37xx.dtsi
+++ b/dts/src/arm64/marvell/armada-37xx.dtsi
@@ -35,6 +35,11 @@
 			reg = <0 0x4000000 0 0x200000>;
 			no-map;
 		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
 	};
 
 	cpus {
diff --git a/dts/src/arm64/marvell/armada-ap806-dual.dtsi b/dts/src/arm64/marvell/armada-ap806-dual.dtsi
index fcab5173fe..990f70303f 100644
--- a/dts/src/arm64/marvell/armada-ap806-dual.dtsi
+++ b/dts/src/arm64/marvell/armada-ap806-dual.dtsi
@@ -51,6 +51,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/marvell/armada-ap806-quad.dtsi b/dts/src/arm64/marvell/armada-ap806-quad.dtsi
index 3db427122f..a7b8e001cc 100644
--- a/dts/src/arm64/marvell/armada-ap806-quad.dtsi
+++ b/dts/src/arm64/marvell/armada-ap806-quad.dtsi
@@ -81,6 +81,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 
 		l2_1: l2-cache1 {
@@ -88,6 +89,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/dts/src/arm64/marvell/armada-ap807-quad.dtsi b/dts/src/arm64/marvell/armada-ap807-quad.dtsi
index 68782f161f..7740098fd1 100644
--- a/dts/src/arm64/marvell/armada-ap807-quad.dtsi
+++ b/dts/src/arm64/marvell/armada-ap807-quad.dtsi
@@ -81,6 +81,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 
 		l2_1: l2-cache1 {
@@ -88,6 +89,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/dts/src/arm64/marvell/armada-ap80x.dtsi b/dts/src/arm64/marvell/armada-ap80x.dtsi
index a06a0a889c..4e6d29ad32 100644
--- a/dts/src/arm64/marvell/armada-ap80x.dtsi
+++ b/dts/src/arm64/marvell/armada-ap80x.dtsi
@@ -41,6 +41,11 @@
 			reg = <0x0 0x4000000 0x0 0x200000>;
 			no-map;
 		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
 	};
 
 	AP_NAME {
diff --git a/dts/src/arm64/marvell/armada-cp11x.dtsi b/dts/src/arm64/marvell/armada-cp11x.dtsi
index d6c0990a26..7d0043824f 100644
--- a/dts/src/arm64/marvell/armada-cp11x.dtsi
+++ b/dts/src/arm64/marvell/armada-cp11x.dtsi
@@ -58,6 +58,8 @@
 		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
 
 		CP11X_LABEL(ethernet): ethernet@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "marvell,armada-7k-pp22";
 			reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
 			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
@@ -69,7 +71,7 @@
 			status = "disabled";
 			dma-coherent;
 
-			CP11X_LABEL(eth0): eth0 {
+			CP11X_LABEL(eth0): ethernet-port@0 {
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
 					<43 IRQ_TYPE_LEVEL_HIGH>,
 					<47 IRQ_TYPE_LEVEL_HIGH>,
@@ -83,12 +85,13 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <0>;
+				reg = <0>;
+				port-id = <0>; /* For backward compatibility. */
 				gop-port-id = <0>;
 				status = "disabled";
 			};
 
-			CP11X_LABEL(eth1): eth1 {
+			CP11X_LABEL(eth1): ethernet-port@1 {
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
 					<44 IRQ_TYPE_LEVEL_HIGH>,
 					<48 IRQ_TYPE_LEVEL_HIGH>,
@@ -102,12 +105,13 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <1>;
+				reg = <1>;
+				port-id = <1>; /* For backward compatibility. */
 				gop-port-id = <2>;
 				status = "disabled";
 			};
 
-			CP11X_LABEL(eth2): eth2 {
+			CP11X_LABEL(eth2): ethernet-port@2 {
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
 					<45 IRQ_TYPE_LEVEL_HIGH>,
 					<49 IRQ_TYPE_LEVEL_HIGH>,
@@ -121,7 +125,8 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <2>;
+				reg = <2>;
+				port-id = <2>; /* For backward compatibility. */
 				gop-port-id = <3>;
 				status = "disabled";
 			};
diff --git a/dts/src/arm64/mediatek/mt2712-evb.dts b/dts/src/arm64/mediatek/mt2712-evb.dts
index 9b1af9c801..d31a194124 100644
--- a/dts/src/arm64/mediatek/mt2712-evb.dts
+++ b/dts/src/arm64/mediatek/mt2712-evb.dts
@@ -26,14 +26,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -50,7 +50,7 @@
 		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +59,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm64/mediatek/mt2712e.dtsi b/dts/src/arm64/mediatek/mt2712e.dtsi
index e6d7453e56..92212cddd3 100644
--- a/dts/src/arm64/mediatek/mt2712e.dtsi
+++ b/dts/src/arm64/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@
 		#clock-cells = <0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "clk32k";
 	};
 
-	clkfpc: oscillator@2 {
+	clkfpc: oscillator-50m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "clkfpc";
 	};
 
-	clkaud_ext_i_0: oscillator@3 {
+	clkaud_ext_i_0: oscillator-aud0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <6500000>;
 		clock-output-names = "clkaud_ext_i_0";
 	};
 
-	clkaud_ext_i_1: oscillator@4 {
+	clkaud_ext_i_1: oscillator-aud1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <196608000>;
 		clock-output-names = "clkaud_ext_i_1";
 	};
 
-	clkaud_ext_i_2: oscillator@5 {
+	clkaud_ext_i_2: oscillator-aud2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <180633600>;
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
-	clki2si0_mck_i: oscillator@6 {
+	clki2si0_mck_i: oscillator-i2s0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si0_mck_i";
 	};
 
-	clki2si1_mck_i: oscillator@7 {
+	clki2si1_mck_i: oscillator-i2s1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si1_mck_i";
 	};
 
-	clki2si2_mck_i: oscillator@8 {
+	clki2si2_mck_i: oscillator-i2s2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si2_mck_i";
 	};
 
-	clktdmin_mclk_i: oscillator@9 {
+	clktdmin_mclk_i: oscillator-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
@@ -266,7 +266,7 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	pio: pinctrl@10005000 {
+	pio: pinctrl@1000b000 {
 		compatible = "mediatek,mt2712-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -766,9 +766,9 @@
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_MSDC30_0>,
 			 <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>,
-			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>,
-			 <&pericfg CLK_PERI_MSDC50_0_EN>;
-		clock-names = "source", "hclk", "bus_clk", "source_cg";
+			 <&pericfg CLK_PERI_MSDC50_0_EN>,
+			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>;
+		clock-names = "source", "hclk", "source_cg", "bus_clk";
 		status = "disabled";
 	};
 
diff --git a/dts/src/arm64/mediatek/mt6779.dtsi b/dts/src/arm64/mediatek/mt6779.dtsi
index 9bdf514596..5c579e88e7 100644
--- a/dts/src/arm64/mediatek/mt6779.dtsi
+++ b/dts/src/arm64/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -117,7 +117,7 @@
 		compatible = "simple-bus";
 		ranges;
 
-		gic: interrupt-controller@0c000000 {
+		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
 			interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@0c53a650 {
+		sysirq: intpol-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -160,7 +160,7 @@
 		};
 
 		pio: pinctrl@10005000 {
-			compatible = "mediatek,mt6779-pinctrl", "syscon";
+			compatible = "mediatek,mt6779-pinctrl";
 			reg = <0 0x10005000 0 0x1000>,
 			      <0 0x11c20000 0 0x1000>,
 			      <0 0x11d10000 0 0x1000>,
diff --git a/dts/src/arm64/mediatek/mt6795-sony-xperia-m5.dts b/dts/src/arm64/mediatek/mt6795-sony-xperia-m5.dts
new file mode 100644
index 0000000000..d3415527d3
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt6795-sony-xperia-m5.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Collabora Ltd
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+/dts-v1/;
+#include "mt6795.dtsi"
+
+/ {
+	model = "Sony Xperia M5";
+	compatible = "sony,xperia-m5", "mediatek,mt6795";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+
+		/* preloader and bootloader regions cannot be touched */
+		preloader-region@44800000 {
+			reg = <0 0x44800000 0 0x100000>;
+			no-map;
+		};
+
+		bootloader-region@46000000 {
+			reg = <0 0x46000000 0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&pio {
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO114__FUNC_UTXD0>;
+			output-high;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO31__FUNC_URXD2>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO32__FUNC_UTXD2>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
diff --git a/dts/src/arm64/mediatek/mt6795.dtsi b/dts/src/arm64/mediatek/mt6795.dtsi
index 46f0e54be7..bb575837e4 100644
--- a/dts/src/arm64/mediatek/mt6795.dtsi
+++ b/dts/src/arm64/mediatek/mt6795.dtsi
@@ -6,7 +6,9 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mediatek,mt6795-clk.h>
 #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+#include <dt-bindings/reset/mediatek,mt6795-resets.h>
 
 / {
 	compatible = "mediatek,mt6795";
@@ -192,6 +194,26 @@
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt6795-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt6795-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt6795-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt6795-pinctrl";
 			reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
@@ -292,7 +314,10 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -301,16 +326,48 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
+		apdma: dma-controller@11000380 {
+			compatible = "mediatek,mt6795-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000380 0 0x60>,
+			      <0 0x11000400 0 0x60>,
+			      <0 0x11000480 0 0x60>,
+			      <0 0x11000500 0 0x60>,
+			      <0 0x11000580 0 0x60>,
+			      <0 0x11000600 0 0x60>,
+			      <0 0x11000680 0 0x60>,
+			      <0 0x11000700 0 0x60>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <8>;
+			clocks = <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "apdma";
+			mediatek,dma-33bits;
+			#dma-cells = <1>;
+		};
+
 		uart2: serial@11004000 {
 			compatible = "mediatek,mt6795-uart",
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -319,7 +376,51 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 6>, <&apdma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11230000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_0>,
+				 <&topckgen CLK_TOP_MSDC50_0_H_SEL>,
+				 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11240000 0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_1>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11250000 0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_2>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc3: mmc@11260000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11260000 0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_3>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
 			status = "disabled";
 		};
 	};
diff --git a/dts/src/arm64/mediatek/mt6797.dtsi b/dts/src/arm64/mediatek/mt6797.dtsi
index 1561623102..c3677d77e0 100644
--- a/dts/src/arm64/mediatek/mt6797.dtsi
+++ b/dts/src/arm64/mediatek/mt6797.dtsi
@@ -95,7 +95,7 @@
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
diff --git a/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
index d3f9eab2b7..af3fe61e40 100644
--- a/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -235,7 +235,6 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	r_smpl = <1>;
 	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_3p3v>;
diff --git a/dts/src/arm64/mediatek/mt7622-rfb1.dts b/dts/src/arm64/mediatek/mt7622-rfb1.dts
index 36722cabe6..b74e774c6e 100644
--- a/dts/src/arm64/mediatek/mt7622-rfb1.dts
+++ b/dts/src/arm64/mediatek/mt7622-rfb1.dts
@@ -208,7 +208,6 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	r_smpl = <1>;
 	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_3p3v>;
diff --git a/dts/src/arm64/mediatek/mt7986a-rfb.dts b/dts/src/arm64/mediatek/mt7986a-rfb.dts
index afe37b702e..9b83925893 100644
--- a/dts/src/arm64/mediatek/mt7986a-rfb.dts
+++ b/dts/src/arm64/mediatek/mt7986a-rfb.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "MediaTek MT7986a RFB";
-	compatible = "mediatek,mt7986a-rfb";
+	compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
 
 	aliases {
 		serial0 = &uart0;
@@ -25,6 +25,10 @@
 	};
 };
 
+&crypto {
+	status = "okay";
+};
+
 &eth {
 	status = "okay";
 
@@ -54,6 +58,88 @@
 	};
 };
 
+&pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
 &switch {
 	ports {
 		#address-cells = <1>;
@@ -121,50 +207,3 @@
 	pinctrl-0 = <&wf_2g_5g_pins>;
 	pinctrl-1 = <&wf_dbdc_pins>;
 };
-
-&pio {
-	uart1_pins: uart1-pins {
-		mux {
-			function = "uart";
-			groups = "uart1";
-		};
-	};
-
-	uart2_pins: uart2-pins {
-		mux {
-			function = "uart";
-			groups = "uart2";
-		};
-	};
-
-	wf_2g_5g_pins: wf-2g-5g-pins {
-		mux {
-			function = "wifi";
-			groups = "wf_2g", "wf_5g";
-		};
-		conf {
-			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-			       "WF1_TOP_CLK", "WF1_TOP_DATA";
-			drive-strength = <4>;
-		};
-	};
-
-	wf_dbdc_pins: wf-dbdc-pins {
-		mux {
-			function = "wifi";
-			groups = "wf_dbdc";
-		};
-		conf {
-			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-			       "WF0_TOP_CLK", "WF0_TOP_DATA";
-			drive-strength = <4>;
-		};
-	};
-};
diff --git a/dts/src/arm64/mediatek/mt7986a.dtsi b/dts/src/arm64/mediatek/mt7986a.dtsi
index 72e0d9722e..0e9406fc63 100644
--- a/dts/src/arm64/mediatek/mt7986a.dtsi
+++ b/dts/src/arm64/mediatek/mt7986a.dtsi
@@ -10,11 +10,12 @@
 #include <dt-bindings/reset/mt7986-resets.h>
 
 / {
+	compatible = "mediatek,mt7986a";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator@0 {
+	clk40m: oscillator-40m {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
 		#clock-cells = <0>;
@@ -76,6 +77,47 @@
 			no-map;
 			reg = <0 0x4fc00000 0 0x00100000>;
 		};
+
+		wo_emi0: wo-emi@4fd00000 {
+			reg = <0 0x4fd00000 0 0x40000>;
+			no-map;
+		};
+
+		wo_emi1: wo-emi@4fd40000 {
+			reg = <0 0x4fd40000 0 0x40000>;
+			no-map;
+		};
+
+		wo_ilm0: wo-ilm@151e0000 {
+			reg = <0 0x151e0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_ilm1: wo-ilm@151f0000 {
+			reg = <0 0x151f0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_data: wo-data@4fd80000 {
+			reg = <0 0x4fd80000 0 0x240000>;
+			no-map;
+		};
+
+		wo_dlm0: wo-dlm@151e8000 {
+			reg = <0 0x151e8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_dlm1: wo-dlm@151f8000 {
+			reg = <0 0x151f8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_boot: wo-boot@15194000 {
+			reg = <0 0x15194000 0 0x1000>;
+			no-map;
+		};
+
 	};
 
 	timer {
@@ -112,6 +154,12 @@
 			#clock-cells = <1>;
 		};
 
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
+		};
+
 		topckgen: topckgen@1001b000 {
 			compatible = "mediatek,mt7986-topckgen", "syscon";
 			reg = <0 0x1001B000 0 0x1000>;
@@ -168,7 +216,7 @@
 			#clock-cells = <1>;
 		};
 
-		trng: trng@1020f000 {
+		trng: rng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
@@ -177,6 +225,21 @@
 			status = "disabled";
 		};
 
+		crypto: crypto@10320000 {
+			compatible = "inside-secure,safexcel-eip97";
+			reg = <0 0x10320000 0 0x40000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3";
+			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
+			clock-names = "infra_eip97_ck";
+			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
+			status = "disabled";
+		};
+
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -218,6 +281,48 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@11008000 {
+			compatible = "mediatek,mt7986-i2c";
+			reg = <0 0x11008000 0 0x90>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <5>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		spi1: spi@1100b000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100b000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
 		ethsys: syscon@15000000 {
 			 #address-cells = <1>;
 			 #size-cells = <1>;
@@ -228,18 +333,17 @@
 			 #reset-cells = <1>;
 		};
 
-		wed_pcie: wed-pcie@10003000 {
-			compatible = "mediatek,mt7986-wed-pcie",
-				     "syscon";
-			reg = <0 0x10003000 0 0x10>;
-		};
-
 		wed0: wed@15010000 {
 			compatible = "mediatek,mt7986-wed",
 				     "syscon";
 			reg = <0 0x15010000 0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif0>;
 		};
 
 		wed1: wed@15011000 {
@@ -248,6 +352,25 @@
 			reg = <0 0x15011000 0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif1>;
+		};
+
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		eth: ethernet@15100000 {
diff --git a/dts/src/arm64/mediatek/mt7986b-rfb.dts b/dts/src/arm64/mediatek/mt7986b-rfb.dts
index 3443013b59..243760cd30 100644
--- a/dts/src/arm64/mediatek/mt7986b-rfb.dts
+++ b/dts/src/arm64/mediatek/mt7986b-rfb.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "MediaTek MT7986b RFB";
-	compatible = "mediatek,mt7986b-rfb";
+	compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
 
 	aliases {
 		serial0 = &uart0;
@@ -25,7 +25,7 @@
 	};
 };
 
-&uart0 {
+&crypto {
 	status = "okay";
 };
 
@@ -99,14 +99,21 @@
 	};
 };
 
-&wifi {
-	status = "okay";
-	pinctrl-names = "default", "dbdc";
-	pinctrl-0 = <&wf_2g_5g_pins>;
-	pinctrl-1 = <&wf_dbdc_pins>;
-};
-
 &pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
 	wf_2g_5g_pins: wf-2g-5g-pins {
 		mux {
 			function = "wifi";
@@ -138,3 +145,35 @@
 		};
 	};
 };
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+};
diff --git a/dts/src/arm64/mediatek/mt7986b.dtsi b/dts/src/arm64/mediatek/mt7986b.dtsi
index 23923b9f89..db5189664c 100644
--- a/dts/src/arm64/mediatek/mt7986b.dtsi
+++ b/dts/src/arm64/mediatek/mt7986b.dtsi
@@ -5,6 +5,9 @@
  */
 
 #include "mt7986a.dtsi"
+/ {
+	compatible = "mediatek,mt7986b";
+};
 
 &pio {
 	compatible = "mediatek,mt7986b-pinctrl";
diff --git a/dts/src/arm64/mediatek/mt8183-kukui.dtsi b/dts/src/arm64/mediatek/mt8183-kukui.dtsi
index b4b86bb1f1..7fc4c592a9 100644
--- a/dts/src/arm64/mediatek/mt8183-kukui.dtsi
+++ b/dts/src/arm64/mediatek/mt8183-kukui.dtsi
@@ -221,11 +221,6 @@
 	};
 };
 
-&afe {
-	i2s3-share = "I2S2";
-	i2s0-share = "I2S5";
-};
-
 &auxadc {
 	status = "okay";
 };
@@ -378,7 +373,6 @@
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	max-frequency = <200000000>;
-	drv-type = <2>;
 	cap-sd-highspeed;
 	sd-uhs-sdr50;
 	sd-uhs-sdr104;
diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi
index a70b669c49..402136bfd5 100644
--- a/dts/src/arm64/mediatek/mt8183.dtsi
+++ b/dts/src/arm64/mediatek/mt8183.dtsi
@@ -1678,7 +1678,7 @@
 				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-names = "job", "mmu", "gpu";
 
-			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
 
 			power-domains =
 				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
diff --git a/dts/src/arm64/mediatek/mt8186.dtsi b/dts/src/arm64/mediatek/mt8186.dtsi
index 64693c17af..c326aeb33a 100644
--- a/dts/src/arm64/mediatek/mt8186.dtsi
+++ b/dts/src/arm64/mediatek/mt8186.dtsi
@@ -198,16 +198,19 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
 		};
 	};
 
diff --git a/dts/src/arm64/mediatek/mt8192.dtsi b/dts/src/arm64/mediatek/mt8192.dtsi
index 6b20376191..424fc89cc6 100644
--- a/dts/src/arm64/mediatek/mt8192.dtsi
+++ b/dts/src/arm64/mediatek/mt8192.dtsi
@@ -169,16 +169,19 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
 		};
 
 		idle-states {
diff --git a/dts/src/arm64/mediatek/mt8195-cherry.dtsi b/dts/src/arm64/mediatek/mt8195-cherry.dtsi
index 9b62e161db..560103e290 100644
--- a/dts/src/arm64/mediatek/mt8195-cherry.dtsi
+++ b/dts/src/arm64/mediatek/mt8195-cherry.dtsi
@@ -120,6 +120,78 @@
 	};
 };
 
+&dp_intf0 {
+	status = "okay";
+
+	port {
+		dp_intf0_out: endpoint {
+			remote-endpoint = <&edp_in>;
+		};
+	};
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	port {
+		dp_intf1_out: endpoint {
+			remote-endpoint = <&dptx_in>;
+		};
+	};
+};
+
+&edp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edptx_pins_default>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			edp_in: endpoint {
+				remote-endpoint = <&dp_intf0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			edp_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dptx_pin>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dptx_in: endpoint {
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -479,6 +551,20 @@
 		};
 	};
 
+	edptx_pins_default: edptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO7__FUNC_EDP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	dptx_pin: dptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
 	i2c0_pins: i2c0-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
diff --git a/dts/src/arm64/mediatek/mt8195-demo.dts b/dts/src/arm64/mediatek/mt8195-demo.dts
index 4fbd99eb49..dec85d2548 100644
--- a/dts/src/arm64/mediatek/mt8195-demo.dts
+++ b/dts/src/arm64/mediatek/mt8195-demo.dts
@@ -56,10 +56,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@54600000 {
 			no-map;
-			reg = <0 0x54600000 0x0 0x30000>;
+			reg = <0 0x54600000 0x0 0x200000>;
 		};
 
 		/* 12 MiB reserved for OP-TEE (BL32)
diff --git a/dts/src/arm64/mediatek/mt8195.dtsi b/dts/src/arm64/mediatek/mt8195.dtsi
index 905d1a90b4..5d31536f4c 100644
--- a/dts/src/arm64/mediatek/mt8195.dtsi
+++ b/dts/src/arm64/mediatek/mt8195.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
+#include <dt-bindings/reset/mt8195-resets.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -36,7 +37,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -49,7 +50,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -62,7 +63,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -75,7 +76,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -213,16 +214,19 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
 		};
 	};
 
@@ -1182,6 +1186,110 @@
 			status = "disabled";
 		};
 
+		pcie0: pcie@112f0000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f0000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x20000000
+				  0x0 0x20000000 0 0x200000>,
+				 <0x82000000 0 0x20200000
+				  0x0 0x20200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@112f8000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f8000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x24000000
+				  0x0 0x24000000 0 0x200000>,
+				 <0x82000000 0 0x24200000
+				  0x0 0x24200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 /* Designer has connect pcie1 with peri_mem_p0 clock */
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&u3port1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		nor_flash: spi@1132c000 {
 			compatible = "mediatek,mt8195-nor",
 				     "mediatek,mt8173-nor";
@@ -1241,6 +1349,37 @@
 				reg = <0x189 0x2>;
 				bits = <7 5>;
 			};
+			pciephy_rx_ln1: pciephy-rx-ln1@190,1 {
+				reg = <0x190 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190,2 {
+				reg = <0x190 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln1_pmos: pciephy-tx-ln1-pmos@191,1 {
+				reg = <0x191 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_rx_ln0: pciephy-rx-ln0@191,2 {
+				reg = <0x191 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln0_nmos: pciephy-tx-ln0-nmos@192,1 {
+				reg = <0x192 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln0_pmos: pciephy-tx-ln0-pmos@192,2 {
+				reg = <0x192 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_glb_intr: pciephy-glb-intr@193 {
+				reg = <0x193 0x1>;
+				bits = <0 4>;
+			};
+			dp_calibration: dp-data@1ac {
+				reg = <0x1ac 0x10>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1461,6 +1600,23 @@
 			};
 		};
 
+		pciephy: phy@11e80000 {
+			compatible = "mediatek,mt8195-pcie-phy";
+			reg = <0 0x11e80000 0 0x10000>;
+			reg-names = "sif";
+			nvmem-cells = <&pciephy_glb_intr>, <&pciephy_tx_ln0_pmos>,
+				      <&pciephy_tx_ln0_nmos>, <&pciephy_rx_ln0>,
+				      <&pciephy_tx_ln1_pmos>, <&pciephy_tx_ln1_nmos>,
+				      <&pciephy_rx_ln1>;
+			nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+					   "tx_ln0_nmos", "rx_ln0",
+					   "tx_ln1_pmos", "tx_ln1_nmos",
+					   "rx_ln1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_PHY>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		ufsphy: ufs-phy@11fa0000 {
 			compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
 			reg = <0 0x11fa0000 0 0xc000>;
@@ -1959,6 +2115,30 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
 		};
 
+		venc: video-codec@1a020000 {
+			compatible = "mediatek,mt8195-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			iommus = <&iommu_vdo M4U_PORT_L19_VENC_RCPU>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REC>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_BSDMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_SV_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_RD_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_CHROMA>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,scp = <&scp>;
+			clocks = <&vencsys CLK_VENC_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+		};
+
 		vencsys_core1: clock-controller@1b000000 {
 			compatible = "mediatek,mt8195-vencsys_core1";
 			reg = <0 0x1b000000 0 0x1000>;
@@ -2067,6 +2247,17 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
 		};
 
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys0  CLK_VDO0_DP_INTF0>,
+				 <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
 		mutex: mutex@1c016000 {
 			compatible = "mediatek,mt8195-disp-mutex";
 			reg = <0 0x1c016000 0 0x1000>;
@@ -2155,5 +2346,39 @@
 			clock-names = "apb", "smi", "gals";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
+
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
+				 <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8195-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8195-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/dts/src/arm64/mediatek/pumpkin-common.dtsi b/dts/src/arm64/mediatek/pumpkin-common.dtsi
index 8ee1529683..ec8dfb3d1c 100644
--- a/dts/src/arm64/mediatek/pumpkin-common.dtsi
+++ b/dts/src/arm64/mediatek/pumpkin-common.dtsi
@@ -17,7 +17,7 @@
 	};
 
 	firmware {
-		optee: optee@4fd00000 {
+		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
@@ -209,7 +209,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0@0 {
+	i2c0_pins_a: i2c0 {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -217,7 +217,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2@0 {
+	i2c2_pins_a: i2c2 {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
diff --git a/dts/src/arm64/nvidia/tegra132-norrin.dts b/dts/src/arm64/nvidia/tegra132-norrin.dts
index d461da0b80..3e8dee85d5 100644
--- a/dts/src/arm64/nvidia/tegra132-norrin.dts
+++ b/dts/src/arm64/nvidia/tegra132-norrin.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: pinmux@0 {
+		pinmux_default: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
diff --git a/dts/src/arm64/nvidia/tegra132.dtsi b/dts/src/arm64/nvidia/tegra132.dtsi
index 3673f79adf..858fc01cec 100644
--- a/dts/src/arm64/nvidia/tegra132.dtsi
+++ b/dts/src/arm64/nvidia/tegra132.dtsi
@@ -393,7 +393,6 @@
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car TEGRA124_CLK_PWM>;
-		clock-names = "pwm";
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
 		status = "disabled";
diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi
index 6602fe421e..b3f1494c02 100644
--- a/dts/src/arm64/nvidia/tegra186.dtsi
+++ b/dts/src/arm64/nvidia/tegra186.dtsi
@@ -78,7 +78,8 @@
 		reg = <0x0 0x2600000 0x0 0x210000>;
 		resets = <&bpmp TEGRA186_RESET_GPCDMA>;
 		reset-names = "gpcdma";
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -112,6 +113,7 @@
 		#dma-cells = <1>;
 		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
 		dma-coherent;
+		dma-channel-mask = <0xfffffffe>;
 		status = "okay";
 	};
 
@@ -790,7 +792,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x3280000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM1>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM1>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -801,7 +802,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x3290000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM2>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM2>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -812,7 +812,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32a0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM3>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM3>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -823,7 +822,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32c0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM5>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM5>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -834,7 +832,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32d0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM6>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM6>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -845,7 +842,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32e0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM7>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM7>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -856,7 +852,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32f0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM8>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM8>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -1274,7 +1269,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0xc340000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM4>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM4>;
 		reset-names = "pwm";
 		status = "disabled";
diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi
index b0f9393dd3..cd272d407e 100644
--- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi
@@ -23,7 +23,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyTCU0,115200n8";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi
index 273a1ef716..f212f6aced 100644
--- a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi
@@ -2117,8 +2117,8 @@
 							"usb-b-connector";
 						label = "micro-USB";
 						type = "micro";
-						vbus-gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
-								GPIO_ACTIVE_LOW>;
+						vbus-gpios = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
+								    GPIO_ACTIVE_LOW>;
 					};
 				};
 
diff --git a/dts/src/arm64/nvidia/tegra194-p3668.dtsi b/dts/src/arm64/nvidia/tegra194-p3668.dtsi
index 0bd66f9c62..0751edddf7 100644
--- a/dts/src/arm64/nvidia/tegra194-p3668.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p3668.dtsi
@@ -20,7 +20,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyTCU0,115200n8";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi
index 41f3a7e188..4afcbd60e1 100644
--- a/dts/src/arm64/nvidia/tegra194.dtsi
+++ b/dts/src/arm64/nvidia/tegra194.dtsi
@@ -86,6 +86,7 @@
 			interrupt-controller;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 169>;
 		};
 
 		cbb-noc@2300000 {
@@ -142,7 +143,8 @@
 			reg = <0x2600000 0x210000>;
 			resets = <&bpmp TEGRA194_RESET_GPCDMA>;
 			reset-names = "gpcdma";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -176,6 +178,7 @@
 			#dma-cells = <1>;
 			iommus = <&smmu TEGRA194_SID_GPCDMA_0>;
 			dma-coherent;
+			dma-channel-mask = <0xfffffffe>;
 			status = "okay";
 		};
 
@@ -626,12 +629,10 @@
 
 		pinmux: pinmux@2430000 {
 			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000>,
-			      <0xc300000 0x4000>;
-
+			reg = <0x2430000 0x17000>;
 			status = "okay";
 
-			pex_rst_c5_out_state: pex_rst_c5_out {
+			pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
 				pex_rst {
 					nvidia,pins = "pex_l5_rst_n_pgg1";
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
@@ -642,7 +643,7 @@
 				};
 			};
 
-			clkreq_c5_bi_dir_state: clkreq_c5_bi_dir {
+			clkreq_c5_bi_dir_state: pinmux-clkreq-c5-bi-dir {
 				clkreq {
 					nvidia,pins = "pex_l5_clkreq_n_pgg0";
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
@@ -935,7 +936,6 @@
 				 <&bpmp TEGRA194_CLK_QSPI0_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA194_RESET_QSPI0>;
-			reset-names = "qspi";
 			status = "disabled";
 		};
 
@@ -949,7 +949,6 @@
 				 <&bpmp TEGRA194_CLK_QSPI1_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA194_RESET_QSPI1>;
-			reset-names = "qspi";
 			status = "disabled";
 		};
 
@@ -958,7 +957,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x3280000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM1>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM1>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -970,7 +968,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x3290000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM2>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM2>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -982,7 +979,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32a0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM3>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM3>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -994,7 +990,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32c0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM5>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM5>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1006,7 +1001,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32d0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM6>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM6>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1018,7 +1012,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32e0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM7>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM7>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1030,7 +1023,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32f0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM8>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM8>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1154,7 +1146,7 @@
 		};
 
 		hda@3510000 {
-			compatible = "nvidia,tegra194-hda", "nvidia,tegra30-hda";
+			compatible = "nvidia,tegra194-hda";
 			reg = <0x3510000 0x10000>;
 			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_HDA>,
@@ -1366,6 +1358,16 @@
 			status = "disabled";
 		};
 
+		hte_lic: hardware-timestamp@3aa0000 {
+			compatible = "nvidia,tegra194-gte-lic";
+			reg = <0x3aa0000 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <11>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
 		hsp_top0: hsp@3c00000 {
 			compatible = "nvidia,tegra194-hsp";
 			reg = <0x03c00000 0xa0000>;
@@ -1579,6 +1581,16 @@
 			#mbox-cells = <2>;
 		};
 
+		hte_aon: hardware-timestamp@c1e0000 {
+			compatible = "nvidia,tegra194-gte-aon";
+			reg = <0xc1e0000 0x10000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <3>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
 		gen2_i2c: i2c@c240000 {
 			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c240000 0x10000>;
@@ -1660,6 +1672,14 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-range = <&pinmux_aon 0 0 30>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra194-pinmux-aon";
+			reg = <0xc300000 0x4000>;
+
+			status = "okay";
 		};
 
 		pwm4: pwm@c340000 {
@@ -1667,7 +1687,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0xc340000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM4>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM4>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1895,7 +1914,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0x15000000 0x15000000 0x01000000>;
+			ranges = <0x14800000 0x14800000 0x02800000>;
 			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>;
 			interconnect-names = "dma-mem";
 			iommus = <&smmu TEGRA194_SID_HOST1X>;
@@ -3029,36 +3048,51 @@
 		};
 
 		l2c_0: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l2c_1: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l2c_2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l2c_3: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l3c: l3-cache {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <4194304>;
 			cache-line-size = <64>;
+			cache-level = <3>;
 			cache-sets = <4096>;
 		};
 	};
diff --git a/dts/src/arm64/nvidia/tegra210-p2597.dtsi b/dts/src/arm64/nvidia/tegra210-p2597.dtsi
index a44c56c1e5..dd9a17922f 100644
--- a/dts/src/arm64/nvidia/tegra210-p2597.dtsi
+++ b/dts/src/arm64/nvidia/tegra210-p2597.dtsi
@@ -1293,14 +1293,14 @@
 			};
 		};
 
-		dvfs_pwm_active_state: dvfs_pwm_active {
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 		};
 
-		dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -1368,6 +1368,7 @@
 		#size-cells = <0>;
 
 		ethernet@1 {
+			compatible = "usb955,9ff";
 			reg = <1>;
 		};
 	};
diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
index 37678c337a..2041371ea7 100644
--- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
+++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
@@ -109,14 +109,14 @@
 	};
 
 	pinmux@700008d4 {
-		dvfs_pwm_active_state: dvfs_pwm_active {
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 		};
 
-		dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi
index 724e874506..bc0cacb20d 100644
--- a/dts/src/arm64/nvidia/tegra210.dtsi
+++ b/dts/src/arm64/nvidia/tegra210.dtsi
@@ -554,42 +554,48 @@
 		compatible = "nvidia,tegra210-pinmux";
 		reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
 		      <0x0 0x70003000 0x0 0x294>; /* Mux registers */
-		sdmmc1_3v3_drv: sdmmc1-3v3-drv {
+
+		sdmmc1_3v3_drv: pinmux-sdmmc1-3v3-drv {
 			sdmmc1 {
 				nvidia,pins = "drive_sdmmc1";
 				nvidia,pull-down-strength = <0x8>;
 				nvidia,pull-up-strength = <0x8>;
 			};
 		};
-		sdmmc1_1v8_drv: sdmmc1-1v8-drv {
+
+		sdmmc1_1v8_drv: pinmux-sdmmc1-1v8-drv {
 			sdmmc1 {
 				nvidia,pins = "drive_sdmmc1";
 				nvidia,pull-down-strength = <0x4>;
 				nvidia,pull-up-strength = <0x3>;
 			};
 		};
-		sdmmc2_1v8_drv: sdmmc2-1v8-drv {
+
+		sdmmc2_1v8_drv: pinmux-sdmmc2-1v8-drv {
 			sdmmc2 {
 				nvidia,pins = "drive_sdmmc2";
 				nvidia,pull-down-strength = <0x10>;
 				nvidia,pull-up-strength = <0x10>;
 			};
 		};
-		sdmmc3_3v3_drv: sdmmc3-3v3-drv {
+
+		sdmmc3_3v3_drv: pinmux-sdmmc3-3v3-drv {
 			sdmmc3 {
 				nvidia,pins = "drive_sdmmc3";
 				nvidia,pull-down-strength = <0x8>;
 				nvidia,pull-up-strength = <0x8>;
 			};
 		};
-		sdmmc3_1v8_drv: sdmmc3-1v8-drv {
+
+		sdmmc3_1v8_drv: pinmux-sdmmc3-1v8-drv {
 			sdmmc3 {
 				nvidia,pins = "drive_sdmmc3";
 				nvidia,pull-down-strength = <0x4>;
 				nvidia,pull-up-strength = <0x3>;
 			};
 		};
-		sdmmc4_1v8_drv: sdmmc4-1v8-drv {
+
+		sdmmc4_1v8_drv: pinmux-sdmmc4-1v8-drv {
 			sdmmc4 {
 				nvidia,pins = "drive_sdmmc4";
 				nvidia,pull-down-strength = <0x10>;
@@ -667,7 +673,6 @@
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car TEGRA210_CLK_PWM>;
-		clock-names = "pwm";
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -912,35 +917,33 @@
 			};
 		};
 
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
+		pinmux {
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
 
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
 
-		sdmmc3_3v3: sdmmc3-3v3 {
-			pins = "sdmmc3";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
 
-		sdmmc3_1v8: sdmmc3-1v8 {
-			pins = "sdmmc3";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
 
-		pex_dpd_disable: pex_en {
-			pex-dpd-disable {
+			pex_dpd_disable: pex-dpd-disable {
 				pins = "pex-bias", "pex-clk1", "pex-clk2";
 				low-power-disable;
 			};
-		};
 
-		pex_dpd_enable: pex_dis {
-			pex-dpd-enable {
+			pex_dpd_enable: pex-dpd-enable {
 				pins = "pex-bias", "pex-clk1", "pex-clk2";
 				low-power-enable;
 			};
@@ -1865,7 +1868,6 @@
 			 <&tegra_car TEGRA210_CLK_QSPI_PM>;
 		clock-names = "qspi", "qspi_out";
 		resets = <&tegra_car 211>;
-		reset-names = "qspi";
 		dmas = <&apbdma 5>, <&apbdma 5>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -2005,6 +2007,7 @@
 
 		L2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi b/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi
index 9e4d72cfa6..8b86ea9cb5 100644
--- a/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi
+++ b/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi
@@ -39,7 +39,6 @@
 		regulator-max-microvolt = <12000000>;
 		gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
 		regulator-boot-on;
-		enable-active-low;
 	};
 
 	bus@0 {
@@ -55,6 +54,13 @@
 			};
 		};
 
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+		};
+
 		mmc@3460000 {
 			status = "okay";
 			bus-width = <8>;
diff --git a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 57ab753288..96aa2267b0 100644
--- a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2007,6 +2007,17 @@
 			status = "okay";
 		};
 
+		serial@31d0000 {
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
 		hda@3510000 {
 			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
 			status = "okay";
@@ -2014,7 +2025,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyTCU0,115200n8";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -2184,4 +2195,12 @@
 		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
 			    "p2u-5", "p2u-6", "p2u-7";
 	};
+
+	pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+
+		cooling-levels = <0 95 178 255>;
+		#cooling-cells = <2>;
+	};
 };
diff --git a/dts/src/arm64/nvidia/tegra234-p3737-0000.dtsi b/dts/src/arm64/nvidia/tegra234-p3737-0000.dtsi
index a85993c85e..e76894574d 100644
--- a/dts/src/arm64/nvidia/tegra234-p3737-0000.dtsi
+++ b/dts/src/arm64/nvidia/tegra234-p3737-0000.dtsi
@@ -2,4 +2,18 @@
 
 / {
 	compatible = "nvidia,p3737-0000";
+
+	bus@0 {
+		pwm@3280000 {
+			status = "okay";
+		};
+
+		pwm@32c0000 {
+			status = "okay";
+		};
+
+		pwm@32f0000 {
+			status = "okay";
+		};
+	};
 };
diff --git a/dts/src/arm64/nvidia/tegra234.dtsi b/dts/src/arm64/nvidia/tegra234.dtsi
index 0170bfa8a4..eaf05ee9ac 100644
--- a/dts/src/arm64/nvidia/tegra234.dtsi
+++ b/dts/src/arm64/nvidia/tegra234.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/memory/tegra234-mc.h>
 #include <dt-bindings/power/tegra234-powergate.h>
 #include <dt-bindings/reset/tegra234-reset.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
 
 / {
 	compatible = "nvidia,tegra234";
@@ -27,7 +28,8 @@
 			reg = <0x2600000 0x210000>;
 			resets = <&bpmp TEGRA234_RESET_GPCDMA>;
 			reset-names = "gpcdma";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -60,6 +62,7 @@
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			dma-channel-mask = <0xfffffffe>;
 			dma-coherent;
 		};
 
@@ -564,7 +567,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0x15000000 0x15000000 0x01000000>;
+			ranges = <0x14800000 0x14800000 0x02000000>;
 			interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>;
 			interconnect-names = "dma-mem";
 			iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>;
@@ -603,6 +606,42 @@
 				iommus = <&smmu_niso1 TEGRA234_SID_VIC>;
 				dma-coherent;
 			};
+
+			nvdec@15480000 {
+				compatible = "nvidia,tegra234-nvdec";
+				reg = <0x15480000 0x00040000>;
+				clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+					 <&bpmp TEGRA234_CLK_FUSE>,
+					 <&bpmp TEGRA234_CLK_TSEC_PKA>;
+				clock-names = "nvdec", "fuse", "tsec_pka";
+				resets = <&bpmp TEGRA234_RESET_NVDEC>;
+				reset-names = "nvdec";
+				power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+				interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+						<&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+				dma-coherent;
+
+				nvidia,memory-controller = <&mc>;
+
+				/*
+				 * Placeholder values that firmware needs to update with the real
+				 * offsets parsed from the microcode headers.
+				 */
+				nvidia,bl-manifest-offset = <0>;
+				nvidia,bl-data-offset = <0>;
+				nvidia,bl-code-offset = <0>;
+				nvidia,os-manifest-offset = <0>;
+				nvidia,os-data-offset = <0>;
+				nvidia,os-code-offset = <0>;
+
+				/*
+				 * Firmware needs to set this to "okay" once the above values have
+				 * been updated.
+				 */
+				status = "disabled";
+			};
 		};
 
 		gpio: gpio@2200000 {
@@ -836,6 +875,13 @@
 			dma-names = "rx", "tx";
 		};
 
+		uarti: serial@31d0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x31d0000 0x10000>;
+			interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		dp_aux_ch3_i2c: i2c@31e0000 {
 			compatible = "nvidia,tegra194-i2c";
 			reg = <0x31e0000 0x100>;
@@ -865,22 +911,79 @@
 				 <&bpmp TEGRA234_CLK_QSPI0_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI0>;
-			reset-names = "qspi";
 			status = "disabled";
 		};
 
 		pwm1: pwm@3280000 {
-			compatible = "nvidia,tegra194-pwm",
-				     "nvidia,tegra186-pwm";
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
 			reg = <0x3280000 0x10000>;
 			clocks = <&bpmp TEGRA234_CLK_PWM1>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA234_RESET_PWM1>;
 			reset-names = "pwm";
 			status = "disabled";
 			#pwm-cells = <2>;
 		};
 
+		pwm2: pwm@3290000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x3290000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM2>;
+			resets = <&bpmp TEGRA234_RESET_PWM2>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm3: pwm@32a0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32a0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			resets = <&bpmp TEGRA234_RESET_PWM3>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm5: pwm@32c0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32c0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM5>;
+			resets = <&bpmp TEGRA234_RESET_PWM5>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm6: pwm@32d0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32d0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM6>;
+			resets = <&bpmp TEGRA234_RESET_PWM6>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm7: pwm@32e0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32e0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM7>;
+			resets = <&bpmp TEGRA234_RESET_PWM7>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm8: pwm@32f0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32f0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM8>;
+			resets = <&bpmp TEGRA234_RESET_PWM8>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
 		spi@3300000 {
 			compatible = "nvidia,tegra234-qspi";
 			reg = <0x3300000 0x1000>;
@@ -891,7 +994,41 @@
 				 <&bpmp TEGRA234_CLK_QSPI1_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI1>;
-			reset-names = "qspi";
+			status = "disabled";
+		};
+
+		mmc@3400000 {
+			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
+			reg = <0x03400000 0x20000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+				 <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+					  <&bpmp TEGRA234_CLK_PLLC4_MUXED>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4_MUXED>,
+						 <&bpmp TEGRA234_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA234_RESET_SDMMC1>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_SDMMC1A>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <14>;
+			nvidia,default-trim = <0x8>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
 			status = "disabled";
 		};
 
@@ -925,7 +1062,7 @@
 		};
 
 		hda@3510000 {
-			compatible = "nvidia,tegra234-hda", "nvidia,tegra30-hda";
+			compatible = "nvidia,tegra234-hda";
 			reg = <0x3510000 0x10000>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA234_CLK_AZA_BIT>,
@@ -967,6 +1104,198 @@
 			#mbox-cells = <2>;
 		};
 
+		p2u_hsio_0: phy@3e00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e00000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_1: phy@3e10000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e10000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_2: phy@3e20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e20000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_3: phy@3e30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e30000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_4: phy@3e40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e40000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_5: phy@3e50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e50000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_6: phy@3e60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e60000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_7: phy@3e70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e70000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_0: phy@3e90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e90000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_1: phy@3ea0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ea0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_2: phy@3eb0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03eb0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_3: phy@3ec0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ec0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_4: phy@3ed0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ed0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_5: phy@3ee0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ee0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_6: phy@3ef0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ef0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_7: phy@3f00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f00000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_0: phy@3f20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f20000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_1: phy@3f30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f30000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_2: phy@3f40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f40000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_3: phy@3f50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f50000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_4: phy@3f60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f60000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_5: phy@3f70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f70000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_6: phy@3f80000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f80000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_7: phy@3f90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f90000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
 		ethernet@6800000 {
 			compatible = "nvidia,tegra234-mgbe";
 			reg = <0x06800000 0x10000>,
@@ -1259,198 +1588,6 @@
 			status = "okay";
 		};
 
-		p2u_hsio_0: phy@3e00000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e00000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_1: phy@3e10000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e10000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_2: phy@3e20000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e20000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_3: phy@3e30000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e30000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_4: phy@3e40000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e40000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_5: phy@3e50000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e50000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_6: phy@3e60000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e60000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_7: phy@3e70000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e70000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_0: phy@3e90000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e90000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_1: phy@3ea0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ea0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_2: phy@3eb0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03eb0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_3: phy@3ec0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ec0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_4: phy@3ed0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ed0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_5: phy@3ee0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ee0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_6: phy@3ef0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ef0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_7: phy@3f00000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f00000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_0: phy@3f20000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f20000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_1: phy@3f30000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f30000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_2: phy@3f40000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f40000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_3: phy@3f50000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f50000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_4: phy@3f60000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f60000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_5: phy@3f70000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f70000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_6: phy@3f80000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f80000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_7: phy@3f90000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f90000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
 		hsp_aon: hsp@c150000 {
 			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
 			reg = <0x0c150000 0x90000>;
@@ -1488,7 +1625,6 @@
 		gen8_i2c: i2c@c250000 {
 			compatible = "nvidia,tegra194-i2c";
 			reg = <0xc250000 0x100>;
-			nvidia,hw-instance-id = <0x7>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clock-frequency = <400000>;
@@ -1530,6 +1666,16 @@
 			gpio-controller;
 		};
 
+		pwm4: pwm@c340000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0xc340000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM4>;
+			resets = <&bpmp TEGRA234_RESET_PWM4>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
 		pmc: pmc@c360000 {
 			compatible = "nvidia,tegra234-pmc";
 			reg = <0x0c360000 0x10000>,
@@ -1541,6 +1687,26 @@
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
 		};
 
 		aon-fabric@c600000 {
@@ -1576,7 +1742,7 @@
 			interrupt-controller;
 		};
 
-		smmu_iso: iommu@10000000{
+		smmu_iso: iommu@10000000 {
 			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
 			reg = <0x10000000 0x1000000>;
 			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
@@ -1879,8 +2045,9 @@
 		reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x2a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x2a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x35 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1932,8 +2099,9 @@
 		reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x2c080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x2c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x38 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1965,7 +2133,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */
 			 <0x02000000 0x0  0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -1985,8 +2153,9 @@
 		reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x2e080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x2e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x3b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2038,8 +2207,9 @@
 		reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x30080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x20 0xb0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2091,8 +2261,9 @@
 		reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x32080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x20 0xf0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2144,8 +2315,9 @@
 		reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x34080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x21 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2178,7 +2350,7 @@
 		bus-range = <0x0 0xff>;
 
 		ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
-			 <0x02000000 0x0  0x40000000 0x21 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+			 <0x02000000 0x0  0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
 		interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>,
@@ -2197,8 +2369,9 @@
 		reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2250,8 +2423,9 @@
 		reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x27 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2303,8 +2477,9 @@
 		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x2b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2336,7 +2511,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */
 			 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2356,8 +2531,9 @@
 		reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x3c080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x3c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x2e 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2409,8 +2585,9 @@
 		reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x3e080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x3e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x32 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2442,7 +2619,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x2e 0x40000000 0x2e 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */
 			 <0x02000000 0x0  0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2905,117 +3082,150 @@
 		};
 
 		l2c0_0: l2-cache00 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c0_1: l2-cache01 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c0_2: l2-cache02 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c0_3: l2-cache03 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c1_0: l2-cache10 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c1_1: l2-cache11 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c1_2: l2-cache12 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c1_3: l2-cache13 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c2_0: l2-cache20 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l2c2_1: l2-cache21 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l2c2_2: l2-cache22 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l2c2_3: l2-cache23 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l3c0: l3-cache0 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <3>;
 		};
 
 		l3c1: l3-cache1 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <3>;
 		};
 
 		l3c2: l3-cache2 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <3>;
 		};
 	};
 
diff --git a/dts/src/arm64/qcom/apq8016-sbc.dts b/dts/src/arm64/qcom/apq8016-sbc.dts
index 1b613098fb..ef5b39ba12 100644
--- a/dts/src/arm64/qcom/apq8016-sbc.dts
+++ b/dts/src/arm64/qcom/apq8016-sbc.dts
@@ -718,14 +718,14 @@
 		"USR_LED_2_CTRL", /* GPIO 120 */
 		"SB_HS_ID";
 
-	msmgpio_leds: msmgpio-leds {
+	msmgpio_leds: msmgpio-leds-state {
 		pins = "gpio21", "gpio120";
 		function = "gpio";
 
 		output-low;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio121";
 		function = "gpio";
 
@@ -734,7 +734,7 @@
 		bias-pull-up;
 	};
 
-	adv7533_int_active: adv533-int-active {
+	adv7533_int_active: adv533-int-active-state {
 		pins = "gpio31";
 		function = "gpio";
 
@@ -742,7 +742,7 @@
 		bias-disable;
 	};
 
-	adv7533_int_suspend: adv7533-int-suspend {
+	adv7533_int_suspend: adv7533-int-suspend-state {
 		pins = "gpio31";
 		function = "gpio";
 
@@ -750,7 +750,7 @@
 		bias-disable;
 	};
 
-	adv7533_switch_active: adv7533-switch-active {
+	adv7533_switch_active: adv7533-switch-active-state {
 		pins = "gpio32";
 		function = "gpio";
 
@@ -758,7 +758,7 @@
 		bias-disable;
 	};
 
-	adv7533_switch_suspend: adv7533-switch-suspend {
+	adv7533_switch_suspend: adv7533-switch-suspend-state {
 		pins = "gpio32";
 		function = "gpio";
 
@@ -766,7 +766,7 @@
 		bias-disable;
 	};
 
-	msm_key_volp_n_default: msm-key-volp-n-default {
+	msm_key_volp_n_default: msm-key-volp-n-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -839,7 +839,7 @@
 		function = "digital";
 
 		output-low;
-		power-source = <PM8916_MPP_L5>;	// 1.8V
+		power-source = <PM8916_MPP_L5>;	/* 1.8V */
 	};
 
 	pm8916_mpps_leds: pm8916-mpps-state {
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dts b/dts/src/arm64/qcom/apq8096-db820c.dts
index 5cdc7ac1a9..fe6c415e82 100644
--- a/dts/src/arm64/qcom/apq8096-db820c.dts
+++ b/dts/src/arm64/qcom/apq8096-db820c.dts
@@ -422,82 +422,46 @@
 		"NC", /* GPIO_148 */
 		"NC"; /* GPIO_149 */
 
-	sdc2_cd_on: sdc2_cd_on {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <16>;	/* 16 MA */
-		};
+	sdc2_cd_on: sdc2-cd-on-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <16>;
 	};
 
-	sdc2_cd_off: sdc2_cd_off {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
+	sdc2_cd_off: sdc2-cd-off-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
 	};
 
-	hdmi_hpd_active: hdmi_hpd_active {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
+	hdmi_hpd_active: hdmi-hpd-active-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <16>;
 	};
 
-	hdmi_hpd_suspend: hdmi_hpd_suspend {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <2>;
-		};
+	hdmi_hpd_suspend: hdmi-hpd-suspend-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <2>;
 	};
 
-	hdmi_ddc_active: hdmi_ddc_active {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
+	hdmi_ddc_active: hdmi-ddc-active-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-up;
 	};
 
-	hdmi_ddc_suspend: hdmi_ddc_suspend {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	hdmi_ddc_suspend: hdmi-ddc-suspend-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 };
 
@@ -560,7 +524,7 @@
 			pins = "gpio5";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <2>; // PM8994_GPIO_S4, 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -569,7 +533,7 @@
 			pins = "gpio19";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 			bias-pull-down;
 		};
@@ -580,7 +544,7 @@
 			pins = "gpio8";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 			bias-pull-down;
 		};
@@ -590,7 +554,7 @@
 		pinconf {
 			pins = "gpio15";
 			function = "func1";
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -602,7 +566,7 @@
 			drive-push-pull;
 			bias-pull-up;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -623,7 +587,7 @@
 			input-enable;
 			bias-pull-down;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 };
@@ -679,7 +643,7 @@
 			input-enable;
 			bias-pull-down;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 };
@@ -751,7 +715,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -963,7 +927,7 @@
 		};
 	};
 
-	pmi8994-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
diff --git a/dts/src/arm64/qcom/apq8096-ifc6640.dts b/dts/src/arm64/qcom/apq8096-ifc6640.dts
index 92f264891d..71e0a50059 100644
--- a/dts/src/arm64/qcom/apq8096-ifc6640.dts
+++ b/dts/src/arm64/qcom/apq8096-ifc6640.dts
@@ -104,65 +104,27 @@
 	status = "okay";
 };
 
-&tlmm {
-	sdc2_pins_default: sdc2-pins-default {
-		clk {
-			pins = "sdc2_clk";
-			bias-disable;
-			drive-strength = <16>;
-		};
-
-		cmd {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		data {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
+&sdc2_state_on {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
 
-		cd {
-			pins = "gpio38";
-			function = "gpio";
-
-			bias-pull-up;
-			drive-strength = <16>;
-		};
+		bias-pull-up;
+		drive-strength = <16>;
 	};
+};
 
-	sdc2_pins_sleep: sdc2-pins-sleep {
-		clk {
-			pins = "sdc2_clk";
-			bias-disable;
-			drive-strength = <2>;
-		};
-
-		cmd {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		data {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		cd {
-			pins = "gpio38";
-			function = "gpio";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
+&sdc2_state_off {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
 	};
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -372,10 +334,6 @@
 
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vreg_l13a_2p95>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_pins_default>;
-	pinctrl-1 = <&sdc2_pins_sleep>;
 };
 
 &ufshc {
diff --git a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts
index 1ba2eca33c..2aee8594b2 100644
--- a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts
+++ b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts
@@ -19,7 +19,6 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-		bootargs-append = " swiotlb=1";
 	};
 };
 
@@ -37,6 +36,8 @@
 
 &blsp1_spi1 {
 	cs-select = <0>;
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	flash@0 {
@@ -49,13 +50,13 @@
 };
 
 &tlmm {
-	i2c_1_pins: i2c-1-pins {
+	i2c_1_pins: i2c-1-state {
 		pins = "gpio42", "gpio43";
 		function = "blsp2_i2c";
 		drive-strength = <8>;
 	};
 
-	spi_0_pins: spi-0-pins {
+	spi_0_pins: spi-0-state {
 		pins = "gpio38", "gpio39", "gpio40", "gpio41";
 		function = "blsp0_spi";
 		drive-strength = <8>;
@@ -80,9 +81,9 @@
 };
 
 &qusb_phy_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &usb2 {
-	status = "ok";
+	status = "okay";
 };
diff --git a/dts/src/arm64/qcom/ipq6018.dtsi b/dts/src/arm64/qcom/ipq6018.dtsi
index a7c7ca980a..5d453f11ac 100644
--- a/dts/src/arm64/qcom/ipq6018.dtsi
+++ b/dts/src/arm64/qcom/ipq6018.dtsi
@@ -218,14 +218,14 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			serial_3_pins: serial3-pinmux {
+			serial_3_pins: serial3-state {
 				pins = "gpio44", "gpio45";
 				function = "blsp2_uart";
 				drive-strength = <8>;
 				bias-pull-down;
 			};
 
-			qpic_pins: qpic-pins {
+			qpic_pins: qpic-state {
 				pins = "gpio1", "gpio3", "gpio4",
 					"gpio5", "gpio6", "gpio7",
 					"gpio8", "gpio10", "gpio11",
@@ -348,7 +348,7 @@
 			status = "disabled";
 		};
 
-		qpic_nand: nand@79b0000 {
+		qpic_nand: nand-controller@79b0000 {
 			compatible = "qcom,ipq6018-nand";
 			reg = <0x0 0x079b0000 0x0 0x10000>;
 			#address-cells = <1>;
@@ -406,7 +406,8 @@
 			pcie_phy0: phy@84200 {
 				reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
 				      <0x0 0x84400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x84800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */
 				#phy-cells = <0>;
 
 				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
@@ -511,14 +512,6 @@
 			clock-names = "xo";
 		};
 
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		};
-
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -770,6 +763,14 @@
 		};
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	wcss: wcss-smp2p {
 		compatible = "qcom,smp2p";
 		qcom,smem = <435>, <428>;
diff --git a/dts/src/arm64/qcom/ipq8074-hk01.dts b/dts/src/arm64/qcom/ipq8074-hk01.dts
index 7143c936de..ca3f96646b 100644
--- a/dts/src/arm64/qcom/ipq8074-hk01.dts
+++ b/dts/src/arm64/qcom/ipq8074-hk01.dts
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
-/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
  */
 #include "ipq8074.dtsi"
+#include "pmp8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
@@ -51,12 +54,12 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpios = <&tlmm 61 0x1>;
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
 &pcie1 {
 	status = "okay";
-	perst-gpios = <&tlmm 58 0x1>;
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_phy0 {
@@ -84,6 +87,7 @@
 
 &sdhc_1 {
 	status = "okay";
+	vqmmc-supply = <&l11>;
 };
 
 &qusb_phy_0 {
diff --git a/dts/src/arm64/qcom/ipq8074-hk10-c1.dts b/dts/src/arm64/qcom/ipq8074-hk10-c1.dts
index 2bfcf42aea..cc1992ca05 100644
--- a/dts/src/arm64/qcom/ipq8074-hk10-c1.dts
+++ b/dts/src/arm64/qcom/ipq8074-hk10-c1.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
  */
 /dts-v1/;
 
diff --git a/dts/src/arm64/qcom/ipq8074-hk10-c2.dts b/dts/src/arm64/qcom/ipq8074-hk10-c2.dts
index 7da39f1d97..d7f0efda6b 100644
--- a/dts/src/arm64/qcom/ipq8074-hk10-c2.dts
+++ b/dts/src/arm64/qcom/ipq8074-hk10-c2.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
  */
 #include "ipq8074-hk10.dtsi"
 
diff --git a/dts/src/arm64/qcom/ipq8074-hk10.dtsi b/dts/src/arm64/qcom/ipq8074-hk10.dtsi
index db4b87944c..651a231554 100644
--- a/dts/src/arm64/qcom/ipq8074-hk10.dtsi
+++ b/dts/src/arm64/qcom/ipq8074-hk10.dtsi
@@ -5,6 +5,7 @@
 /dts-v1/;
 
 #include "ipq8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -22,7 +23,7 @@
 };
 
 &blsp1_spi1 {
-	status = "ok";
+	status = "okay";
 
 	flash@0 {
 		#address-cells = <1>;
@@ -34,33 +35,33 @@
 };
 
 &blsp1_uart5 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
-	perst-gpios = <&tlmm 58 0x1>;
+	status = "okay";
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
 &pcie1 {
-	status = "ok";
-	perst-gpios = <&tlmm 61 0x1>;
+	status = "okay";
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi
index a721cdd804..4e51d8e3df 100644
--- a/dts/src/arm64/qcom/ipq8074.dtsi
+++ b/dts/src/arm64/qcom/ipq8074.dtsi
@@ -129,10 +129,10 @@
 			status = "disabled";
 
 			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,       /* Tx */
+				reg = <0x00058200 0x130>,     /* Tx */
 				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS  */
-				      <0x00058600 0x044>;     /* PCS misc*/
+				      <0x00058800 0x1f8>,     /* PCS */
+				      <0x00058600 0x044>;     /* PCS misc */
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB1_PIPE_CLK>;
@@ -172,10 +172,10 @@
 			status = "disabled";
 
 			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,       /* Tx */
+				reg = <0x00078200 0x130>,     /* Tx */
 				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS  */
-				      <0x00078600 0x044>;     /* PCS misc*/
+				      <0x00078800 0x1f8>,     /* PCS */
+				      <0x00078600 0x044>;     /* PCS misc */
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB0_PIPE_CLK>;
@@ -273,6 +273,16 @@
 			status = "disabled";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq8074-tsens";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		cryptobam: dma-controller@704000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x00704000 0x20000>;
@@ -307,35 +317,35 @@
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 
-			serial_4_pins: serial4-pinmux {
+			serial_4_pins: serial4-state {
 				pins = "gpio23", "gpio24";
 				function = "blsp4_uart1";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			i2c_0_pins: i2c-0-pinmux {
+			i2c_0_pins: i2c-0-state {
 				pins = "gpio42", "gpio43";
 				function = "blsp1_i2c";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			spi_0_pins: spi-0-pins {
+			spi_0_pins: spi-0-state {
 				pins = "gpio38", "gpio39", "gpio40", "gpio41";
 				function = "blsp0_spi";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			hsuart_pins: hsuart-pins {
+			hsuart_pins: hsuart-state {
 				pins = "gpio46", "gpio47", "gpio48", "gpio49";
 				function = "blsp2_uart";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			qpic_pins: qpic-pins {
+			qpic_pins: qpic-state {
 				pins = "gpio1", "gpio3", "gpio4",
 				       "gpio5", "gpio6", "gpio7",
 				       "gpio8", "gpio10", "gpio11",
@@ -350,9 +360,11 @@
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			#clock-cells = <0x1>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+			#clock-cells = <1>;
 			#power-domain-cells = <1>;
-			#reset-cells = <0x1>;
+			#reset-cells = <1>;
 		};
 
 		tcsr_mutex: hwlock@1905000 {
@@ -669,11 +681,21 @@
 		apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq8074-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
 		};
 
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq8074-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -865,4 +887,90 @@
 			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+		};
+
+		nss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+		};
+
+		nss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+		};
+
+		wcss-phya0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+		};
+
+		wcss-phya1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+		};
+
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 11>;
+		};
+
+		cpu3_thermal: cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 12>;
+		};
+
+		cluster_thermal: cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 13>;
+		};
+
+		wcss-phyb0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 14>;
+		};
+
+		wcss-phyb1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 15>;
+		};
+	};
 };
diff --git a/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts b/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts
index 3dc9619fde..701a5585d7 100644
--- a/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts
+++ b/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts
@@ -5,6 +5,7 @@
 #include "msm8916-pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Alcatel OneTouch Idol 3 (4.7)";
@@ -34,6 +35,19 @@
 		};
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default>;
+
+		led-0 {
+			gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "torch";
+			function = LED_FUNCTION_TORCH;
+		};
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
@@ -116,6 +130,27 @@
 	};
 };
 
+&blsp_i2c6 {
+	status = "okay";
+
+	led-controller@68 {
+		compatible = "si-en,sn3190";
+		reg = <0x68>;
+		shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_enable_default &led_shutdown_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -260,7 +295,7 @@
 };
 
 &msmgpio {
-	accel_int_default: accel-int-default {
+	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
 		function = "gpio";
 
@@ -268,7 +303,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -276,7 +311,15 @@
 		bias-pull-up;
 	};
 
-	gyro_int_default: gyro-int-default {
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gyro_int_default: gyro-int-default-state {
 		pins = "gpio97", "gpio98";
 		function = "gpio";
 
@@ -284,7 +327,30 @@
 		bias-disable;
 	};
 
-	mag_reset_default: mag-reset-default {
+	/*
+	 * The OEM wired an additional GPIO to be asserted so that
+	 * the si-en,sn3190 LED IC works. Since this GPIO is not
+	 * part of the IC datasheet nor supported by the driver,
+	 * force it asserted here.
+	 */
+	led_enable_default: led-enable-default-state {
+		pins = "gpio102";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	led_shutdown_default: led-shutdown-default-state {
+		pins = "gpio89";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio8";
 		function = "gpio";
 
@@ -292,7 +358,7 @@
 		bias-disable;
 	};
 
-	proximity_int_default: proximity-int-default {
+	proximity_int_default: proximity-int-default-state {
 		pins = "gpio12";
 		function = "gpio";
 
@@ -300,7 +366,7 @@
 		bias-pull-up;
 	};
 
-	ts_int_reset_default: ts-int-reset-default {
+	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
 
@@ -308,7 +374,7 @@
 		bias-disable;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio69";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-asus-z00l.dts b/dts/src/arm64/qcom/msm8916-asus-z00l.dts
index dd92070a12..3618704a53 100644
--- a/dts/src/arm64/qcom/msm8916-asus-z00l.dts
+++ b/dts/src/arm64/qcom/msm8916-asus-z00l.dts
@@ -263,7 +263,7 @@
 };
 
 &msmgpio {
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio117";
 		function = "gpio";
 
@@ -271,7 +271,7 @@
 		bias-pull-up;
 	};
 
-	imu_default: imu-default {
+	imu_default: imu-default-state {
 		pins = "gpio36";
 		function = "gpio";
 
@@ -279,7 +279,7 @@
 		bias-disable;
 	};
 
-	mag_reset_default: mag-reset-default {
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio112";
 		function = "gpio";
 
@@ -287,7 +287,7 @@
 		bias-disable;
 	};
 
-	sd_vmmc_en_default: sd-vmmc-en-default {
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
 		pins = "gpio87";
 		function = "gpio";
 
@@ -295,14 +295,16 @@
 		bias-disable;
 	};
 
-	touchscreen_default: touchscreen-default {
-		pins = "gpio13";
-		function = "gpio";
+	touchscreen_default: touchscreen-default-state {
+		touch-pins {
+			pins = "gpio13";
+			function = "gpio";
 
-		drive-strength = <2>;
-		bias-pull-up;
+			drive-strength = <2>;
+			bias-pull-up;
+		};
 
-		reset {
+		reset-pins {
 			pins = "gpio12";
 			function = "gpio";
 
@@ -311,7 +313,7 @@
 		};
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-huawei-g7.dts b/dts/src/arm64/qcom/msm8916-huawei-g7.dts
index 9e470c6727..8c07eca900 100644
--- a/dts/src/arm64/qcom/msm8916-huawei-g7.dts
+++ b/dts/src/arm64/qcom/msm8916-huawei-g7.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2021 Stephan Gerhold
+/*
+ * Copyright (C) 2021 Stephan Gerhold
+ */
 
 /dts-v1/;
 
@@ -414,7 +416,7 @@
 };
 
 &msmgpio {
-	accel_irq_default: accel-irq-default {
+	accel_irq_default: accel-irq-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -422,7 +424,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -430,7 +432,7 @@
 		bias-pull-up;
 	};
 
-	gpio_leds_default: gpio-leds-default {
+	gpio_leds_default: gpio-leds-default-state {
 		pins = "gpio8", "gpio9", "gpio10";
 		function = "gpio";
 
@@ -438,7 +440,7 @@
 		bias-disable;
 	};
 
-	nfc_default: nfc-default {
+	nfc_default: nfc-default-state {
 		pins = "gpio2", "gpio20", "gpio21";
 		function = "gpio";
 
@@ -446,7 +448,7 @@
 		bias-disable;
 	};
 
-	mag_reset_default: mag-reset-default {
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio36";
 		function = "gpio";
 
@@ -454,7 +456,7 @@
 		bias-disable;
 	};
 
-	prox_irq_default: prox-irq-default {
+	prox_irq_default: prox-irq-default-state {
 		pins = "gpio113";
 		function = "gpio";
 
@@ -462,7 +464,7 @@
 		bias-disable;
 	};
 
-	reg_lcd_en_default: reg-lcd-en-default {
+	reg_lcd_en_default: reg-lcd-en-default-state {
 		pins = "gpio32", "gpio97";
 		function = "gpio";
 
@@ -470,7 +472,7 @@
 		bias-disable;
 	};
 
-	sdhc2_cd_default: sdhc2-cd-default {
+	sdhc2_cd_default: sdhc2-cd-default-state {
 		pins = "gpio56";
 		function = "gpio";
 
@@ -478,7 +480,7 @@
 		bias-disable;
 	};
 
-	ts_irq_default: ts-irq-default {
+	ts_irq_default: ts-irq-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
@@ -486,7 +488,7 @@
 		bias-disable;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio117";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts
index d85e7f7c08..d1e8cf2f50 100644
--- a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts
+++ b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts
@@ -22,7 +22,7 @@
 	};
 
 	reserved-memory {
-		// wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
+		/* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
 		/delete-node/ wcnss@89300000;
 
 		wcnss_mem: wcnss@8b600000 {
@@ -204,12 +204,12 @@
 
 		rmi4-f01@1 {
 			reg = <0x1>;
-			syna,nosleep-mode = <1>; // Allow sleeping
+			syna,nosleep-mode = <1>; /* Allow sleeping */
 		};
 
 		rmi4-f12@12 {
 			reg = <0x12>;
-			syna,sensor-type = <1>; // Touchscreen
+			syna,sensor-type = <1>; /* Touchscreen */
 		};
 	};
 };
@@ -367,7 +367,7 @@
 };
 
 &msmgpio {
-	accel_int_default: accel-int-default {
+	accel_int_default: accel-int-default-state {
 		pins = "gpio116";
 		function = "gpio";
 
@@ -375,7 +375,7 @@
 		bias-disable;
 	};
 
-	camera_flash_default: camera-flash-default {
+	camera_flash_default: camera-flash-default-state {
 		pins = "gpio31", "gpio32";
 		function = "gpio";
 
@@ -383,7 +383,7 @@
 		bias-disable;
 	};
 
-	ctp_pwr_en_default: ctp-pwr-en-default {
+	ctp_pwr_en_default: ctp-pwr-en-default-state {
 		pins = "gpio17";
 		function = "gpio";
 
@@ -391,7 +391,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -399,7 +399,7 @@
 		bias-pull-up;
 	};
 
-	gyro_int_default: gyro-int-default {
+	gyro_int_default: gyro-int-default-state {
 		pins = "gpio22", "gpio23";
 		function = "gpio";
 
@@ -407,7 +407,7 @@
 		bias-disable;
 	};
 
-	light_int_default: light-int-default {
+	light_int_default: light-int-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -415,7 +415,7 @@
 		bias-disable;
 	};
 
-	magn_int_default: magn-int-default {
+	magn_int_default: magn-int-default-state {
 		pins = "gpio113";
 		function = "gpio";
 
@@ -423,7 +423,7 @@
 		bias-disable;
 	};
 
-	tp_int_default: tp-int-default {
+	tp_int_default: tp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts b/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts
index b4812f093b..3899e11b98 100644
--- a/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts
+++ b/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts
@@ -234,7 +234,7 @@
 };
 
 &msmgpio {
-	button_backlight_default: button-backlight-default {
+	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";
 		function = "gpio";
 
@@ -242,7 +242,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -250,7 +250,7 @@
 		bias-pull-up;
 	};
 
-	mag_reset_default: mag-reset-default {
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio111";
 		function = "gpio";
 
@@ -258,7 +258,7 @@
 		bias-disable;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-pins.dtsi b/dts/src/arm64/qcom/msm8916-pins.dtsi
index 7dedb91b99..33dfcf318a 100644
--- a/dts/src/arm64/qcom/msm8916-pins.dtsi
+++ b/dts/src/arm64/qcom/msm8916-pins.dtsi
@@ -5,8 +5,8 @@
 
 &msmgpio {
 
-	blsp1_uart1_default: blsp1-uart1-default {
-		//	TX, RX, CTS_N, RTS_N
+	blsp1_uart1_default: blsp1-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
 		pins = "gpio0", "gpio1", "gpio2", "gpio3";
 		function = "blsp_uart1";
 
@@ -14,7 +14,7 @@
 		bias-disable;
 	};
 
-	blsp1_uart1_sleep: blsp1-uart1-sleep {
+	blsp1_uart1_sleep: blsp1-uart1-sleep-state {
 		pins = "gpio0", "gpio1", "gpio2", "gpio3";
 		function = "gpio";
 
@@ -22,7 +22,7 @@
 		bias-pull-down;
 	};
 
-	blsp1_uart2_default: blsp1-uart2-default {
+	blsp1_uart2_default: blsp1-uart2-default-state {
 		pins = "gpio4", "gpio5";
 		function = "blsp_uart2";
 
@@ -30,7 +30,7 @@
 		bias-disable;
 	};
 
-	blsp1_uart2_sleep: blsp1-uart2-sleep {
+	blsp1_uart2_sleep: blsp1-uart2-sleep-state {
 		pins = "gpio4", "gpio5";
 		function = "gpio";
 
@@ -38,14 +38,15 @@
 		bias-pull-down;
 	};
 
-	spi1_default: spi1-default {
-		pins = "gpio0", "gpio1", "gpio3";
-		function = "blsp_spi1";
+	spi1_default: spi1-default-state {
+		spi-pins {
+			pins = "gpio0", "gpio1", "gpio3";
+			function = "blsp_spi1";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio2";
 			function = "gpio";
 
@@ -55,7 +56,7 @@
 		};
 	};
 
-	spi1_sleep: spi1-sleep {
+	spi1_sleep: spi1-sleep-state {
 		pins = "gpio0", "gpio1", "gpio2", "gpio3";
 		function = "gpio";
 
@@ -63,14 +64,15 @@
 		bias-pull-down;
 	};
 
-	spi2_default: spi2-default {
-		pins = "gpio4", "gpio5", "gpio7";
-		function = "blsp_spi2";
+	spi2_default: spi2-default-state {
+		spi-pins {
+			pins = "gpio4", "gpio5", "gpio7";
+			function = "blsp_spi2";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio6";
 			function = "gpio";
 
@@ -80,7 +82,7 @@
 		};
 	};
 
-	spi2_sleep: spi2-sleep {
+	spi2_sleep: spi2-sleep-state {
 		pins = "gpio4", "gpio5", "gpio6", "gpio7";
 		function = "gpio";
 
@@ -88,14 +90,15 @@
 		bias-pull-down;
 	};
 
-	spi3_default: spi3-default {
-		pins = "gpio8", "gpio9", "gpio11";
-		function = "blsp_spi3";
+	spi3_default: spi3-default-state {
+		spi-pins {
+			pins = "gpio8", "gpio9", "gpio11";
+			function = "blsp_spi3";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio10";
 			function = "gpio";
 
@@ -105,7 +108,7 @@
 		};
 	};
 
-	spi3_sleep: spi3-sleep {
+	spi3_sleep: spi3-sleep-state {
 		pins = "gpio8", "gpio9", "gpio10", "gpio11";
 		function = "gpio";
 
@@ -113,14 +116,15 @@
 		bias-pull-down;
 	};
 
-	spi4_default: spi4-default {
-		pins = "gpio12", "gpio13", "gpio15";
-		function = "blsp_spi4";
-
-		drive-strength = <12>;
-		bias-disable;
+	spi4_default: spi4-default-state {
+		spi-pins {
+			pins = "gpio12", "gpio13", "gpio15";
+			function = "blsp_spi4";
 
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio14";
 			function = "gpio";
 
@@ -130,7 +134,7 @@
 		};
 	};
 
-	spi4_sleep: spi4-sleep {
+	spi4_sleep: spi4-sleep-state {
 		pins = "gpio12", "gpio13", "gpio14", "gpio15";
 		function = "gpio";
 
@@ -138,14 +142,15 @@
 		bias-pull-down;
 	};
 
-	spi5_default: spi5-default {
-		pins = "gpio16", "gpio17", "gpio19";
-		function = "blsp_spi5";
+	spi5_default: spi5-default-state {
+		spi-pins {
+			pins = "gpio16", "gpio17", "gpio19";
+			function = "blsp_spi5";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio18";
 			function = "gpio";
 
@@ -155,7 +160,7 @@
 		};
 	};
 
-	spi5_sleep: spi5-sleep {
+	spi5_sleep: spi5-sleep-state {
 		pins = "gpio16", "gpio17", "gpio18", "gpio19";
 		function = "gpio";
 
@@ -163,14 +168,15 @@
 		bias-pull-down;
 	};
 
-	spi6_default: spi6-default {
-		pins = "gpio20", "gpio21", "gpio23";
-		function = "blsp_spi6";
-
-		drive-strength = <12>;
-		bias-disable;
+	spi6_default: spi6-default-state {
+		spi-pins {
+			pins = "gpio20", "gpio21", "gpio23";
+			function = "blsp_spi6";
 
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio22";
 			function = "gpio";
 
@@ -180,7 +186,7 @@
 		};
 	};
 
-	spi6_sleep: spi6-sleep {
+	spi6_sleep: spi6-sleep-state {
 		pins = "gpio20", "gpio21", "gpio22", "gpio23";
 		function = "gpio";
 
@@ -188,7 +194,7 @@
 		bias-pull-down;
 	};
 
-	i2c1_default: i2c1-default {
+	i2c1_default: i2c1-default-state {
 		pins = "gpio2", "gpio3";
 		function = "blsp_i2c1";
 
@@ -196,7 +202,7 @@
 		bias-disable;
 	};
 
-	i2c1_sleep: i2c1-sleep {
+	i2c1_sleep: i2c1-sleep-state {
 		pins = "gpio2", "gpio3";
 		function = "gpio";
 
@@ -204,7 +210,7 @@
 		bias-disable;
 	};
 
-	i2c2_default: i2c2-default {
+	i2c2_default: i2c2-default-state {
 		pins = "gpio6", "gpio7";
 		function = "blsp_i2c2";
 
@@ -212,7 +218,7 @@
 		bias-disable;
 	};
 
-	i2c2_sleep: i2c2-sleep {
+	i2c2_sleep: i2c2-sleep-state {
 		pins = "gpio6", "gpio7";
 		function = "gpio";
 
@@ -220,7 +226,7 @@
 		bias-disable;
 	};
 
-	i2c3_default: i2c3-default {
+	i2c3_default: i2c3-default-state {
 		pins = "gpio10", "gpio11";
 		function = "blsp_i2c3";
 
@@ -228,7 +234,7 @@
 		bias-disable;
 	};
 
-	i2c3_sleep: i2c3-sleep {
+	i2c3_sleep: i2c3-sleep-state {
 		pins = "gpio10", "gpio11";
 		function = "gpio";
 
@@ -236,7 +242,7 @@
 		bias-disable;
 	};
 
-	i2c4_default: i2c4-default {
+	i2c4_default: i2c4-default-state {
 		pins = "gpio14", "gpio15";
 		function = "blsp_i2c4";
 
@@ -244,7 +250,7 @@
 		bias-disable;
 	};
 
-	i2c4_sleep: i2c4-sleep {
+	i2c4_sleep: i2c4-sleep-state {
 		pins = "gpio14", "gpio15";
 		function = "gpio";
 
@@ -252,7 +258,7 @@
 		bias-disable;
 	};
 
-	i2c5_default: i2c5-default {
+	i2c5_default: i2c5-default-state {
 		pins = "gpio18", "gpio19";
 		function = "blsp_i2c5";
 
@@ -260,7 +266,7 @@
 		bias-disable;
 	};
 
-	i2c5_sleep: i2c5-sleep {
+	i2c5_sleep: i2c5-sleep-state {
 		pins = "gpio18", "gpio19";
 		function = "gpio";
 
@@ -268,7 +274,7 @@
 		bias-disable;
 	};
 
-	i2c6_default: i2c6-default {
+	i2c6_default: i2c6-default-state {
 		pins = "gpio22", "gpio23";
 		function = "blsp_i2c6";
 
@@ -276,7 +282,7 @@
 		bias-disable;
 	};
 
-	i2c6_sleep: i2c6-sleep {
+	i2c6_sleep: i2c6-sleep-state {
 		pins = "gpio22", "gpio23";
 		function = "gpio";
 
@@ -284,14 +290,14 @@
 		bias-disable;
 	};
 
-	pmx-sdc1-clk {
-		sdc1_clk_on: clk-on {
+	pmx-sdc1-clk-state {
+		sdc1_clk_on: clk-on-pins {
 			pins = "sdc1_clk";
 
 			bias-disable;
 			drive-strength = <16>;
 		};
-		sdc1_clk_off: clk-off {
+		sdc1_clk_off: clk-off-pins {
 			pins = "sdc1_clk";
 
 			bias-disable;
@@ -299,14 +305,14 @@
 		};
 	};
 
-	pmx-sdc1-cmd {
-		sdc1_cmd_on: cmd-on {
+	pmx-sdc1-cmd-state {
+		sdc1_cmd_on: cmd-on-pins {
 			pins = "sdc1_cmd";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc1_cmd_off: cmd-off {
+		sdc1_cmd_off: cmd-off-pins {
 			pins = "sdc1_cmd";
 
 			bias-pull-up;
@@ -314,14 +320,14 @@
 		};
 	};
 
-	pmx-sdc1-data {
-		sdc1_data_on: data-on {
+	pmx-sdc1-data-state {
+		sdc1_data_on: data-on-pins {
 			pins = "sdc1_data";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc1_data_off: data-off {
+		sdc1_data_off: data-off-pins {
 			pins = "sdc1_data";
 
 			bias-pull-up;
@@ -329,14 +335,14 @@
 		};
 	};
 
-	pmx-sdc2-clk {
-		sdc2_clk_on: clk-on {
+	pmx-sdc2-clk-state {
+		sdc2_clk_on: clk-on-pins {
 			pins = "sdc2_clk";
 
 			bias-disable;
 			drive-strength = <16>;
 		};
-		sdc2_clk_off: clk-off {
+		sdc2_clk_off: clk-off-pins {
 			pins = "sdc2_clk";
 
 			bias-disable;
@@ -344,14 +350,14 @@
 		};
 	};
 
-	pmx-sdc2-cmd {
-		sdc2_cmd_on: cmd-on {
+	pmx-sdc2-cmd-state {
+		sdc2_cmd_on: cmd-on-pins {
 			pins = "sdc2_cmd";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc2_cmd_off: cmd-off {
+		sdc2_cmd_off: cmd-off-pins {
 			pins = "sdc2_cmd";
 
 			bias-pull-up;
@@ -359,14 +365,14 @@
 		};
 	};
 
-	pmx-sdc2-data {
-		sdc2_data_on: data-on {
+	pmx-sdc2-data-state {
+		sdc2_data_on: data-on-pins {
 			pins = "sdc2_data";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc2_data_off: data-off {
+		sdc2_data_off: data-off-pins {
 			pins = "sdc2_data";
 
 			bias-pull-up;
@@ -374,15 +380,15 @@
 		};
 	};
 
-	pmx-sdc2-cd-pin {
-		sdc2_cd_on: cd-on {
+	pmx-sdc2-cd-pin-state {
+		sdc2_cd_on: cd-on-pins {
 			pins = "gpio38";
 			function = "gpio";
 
 			drive-strength = <2>;
 			bias-pull-up;
 		};
-		sdc2_cd_off: cd-off {
+		sdc2_cd_off: cd-off-pins {
 			pins = "gpio38";
 			function = "gpio";
 
@@ -391,8 +397,8 @@
 		};
 	};
 
-	cdc-pdm-lines {
-		cdc_pdm_lines_act: pdm-lines-on {
+	cdc-pdm-lines-state {
+		cdc_pdm_lines_act: pdm-lines-on-pins {
 			pins = "gpio63", "gpio64", "gpio65", "gpio66",
 			       "gpio67", "gpio68";
 			function = "cdc_pdm0";
@@ -400,7 +406,7 @@
 			drive-strength = <8>;
 			bias-disable;
 		};
-		cdc_pdm_lines_sus: pdm-lines-off {
+		cdc_pdm_lines_sus: pdm-lines-off-pins {
 			pins = "gpio63", "gpio64", "gpio65", "gpio66",
 			       "gpio67", "gpio68";
 			function = "cdc_pdm0";
@@ -410,15 +416,15 @@
 		};
 	};
 
-	ext-pri-tlmm-lines {
-		ext_pri_tlmm_lines_act: ext-pa-on {
+	ext-pri-tlmm-lines-state {
+		ext_pri_tlmm_lines_act: ext-pa-on-pins {
 			pins = "gpio113", "gpio114", "gpio115", "gpio116";
 			function = "pri_mi2s";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_pri_tlmm_lines_sus: ext-pa-off {
+		ext_pri_tlmm_lines_sus: ext-pa-off-pins {
 			pins = "gpio113", "gpio114", "gpio115", "gpio116";
 			function = "pri_mi2s";
 
@@ -427,15 +433,15 @@
 		};
 	};
 
-	ext-pri-ws-line {
-		ext_pri_ws_act: ext-pa-on {
+	ext-pri-ws-line-state {
+		ext_pri_ws_act: ext-pa-on-pins {
 			pins = "gpio110";
 			function = "pri_mi2s_ws";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_pri_ws_sus: ext-pa-off {
+		ext_pri_ws_sus: ext-pa-off-pins {
 			pins = "gpio110";
 			function = "pri_mi2s_ws";
 
@@ -444,15 +450,15 @@
 		};
 	};
 
-	ext-mclk-tlmm-lines {
-		ext_mclk_tlmm_lines_act: mclk-lines-on {
+	ext-mclk-tlmm-lines-state {
+		ext_mclk_tlmm_lines_act: mclk-lines-on-pins {
 			pins = "gpio116";
 			function = "pri_mi2s";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_mclk_tlmm_lines_sus: mclk-lines-off {
+		ext_mclk_tlmm_lines_sus: mclk-lines-off-pins {
 			pins = "gpio116";
 			function = "pri_mi2s";
 
@@ -462,15 +468,15 @@
 	};
 
 	/* secondary Mi2S */
-	ext-sec-tlmm-lines {
-		ext_sec_tlmm_lines_act: tlmm-lines-on {
+	ext-sec-tlmm-lines-state {
+		ext_sec_tlmm_lines_act: tlmm-lines-on-pins {
 			pins = "gpio112", "gpio117", "gpio118", "gpio119";
 			function = "sec_mi2s";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_sec_tlmm_lines_sus: tlmm-lines-off {
+		ext_sec_tlmm_lines_sus: tlmm-lines-off-pins {
 			pins = "gpio112", "gpio117", "gpio118", "gpio119";
 			function = "sec_mi2s";
 
@@ -479,40 +485,38 @@
 		};
 	};
 
-	cdc-dmic-lines {
-		cdc_dmic_lines_act: dmic-lines-on {
-			clk {
-				pins = "gpio0";
-				function = "dmic0_clk";
+	cdc_dmic_lines_act: cdc-dmic-lines-on-state {
+		clk-pins {
+			pins = "gpio0";
+			function = "dmic0_clk";
 
-				drive-strength = <8>;
-			};
-			data {
-				pins = "gpio1";
-				function = "dmic0_data";
+			drive-strength = <8>;
+		};
+		data-pins {
+			pins = "gpio1";
+			function = "dmic0_data";
 
-				drive-strength = <8>;
-			};
+			drive-strength = <8>;
 		};
-		cdc_dmic_lines_sus: dmic-lines-off {
-			clk {
-				pins = "gpio0";
-				function = "dmic0_clk";
+	};
+	cdc_dmic_lines_sus: cdc-dmic-lines-off-state {
+		clk-pins {
+			pins = "gpio0";
+			function = "dmic0_clk";
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-			data {
-				pins = "gpio1";
-				function = "dmic0_data";
+			drive-strength = <2>;
+			bias-disable;
+		};
+		data-pins {
+			pins = "gpio1";
+			function = "dmic0_data";
 
-				drive-strength = <2>;
-				bias-disable;
-			};
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
-	wcnss_pin_a: wcnss-active {
+	wcnss_pin_a: wcnss-active-state {
 		pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
 		function = "wcss_wlan";
 
@@ -520,7 +524,7 @@
 		bias-pull-up;
 	};
 
-	cci0_default: cci0-default {
+	cci0_default: cci0-default-state {
 		pins = "gpio29", "gpio30";
 		function = "cci_i2c";
 
@@ -528,22 +532,22 @@
 		bias-disable;
 	};
 
-	camera_front_default: camera-front-default {
-		pwdn {
+	camera_front_default: camera-front-default-state {
+		pwdn-pins {
 			pins = "gpio33";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		rst {
+		rst-pins {
 			pins = "gpio28";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		mclk1 {
+		mclk1-pins {
 			pins = "gpio27";
 			function = "cam_mclk1";
 
@@ -552,22 +556,22 @@
 		};
 	};
 
-	camera_rear_default: camera-rear-default {
-		pwdn {
+	camera_rear_default: camera-rear-default-state {
+		pwdn-pins {
 			pins = "gpio34";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		rst {
+		rst-pins {
 			pins = "gpio35";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		mclk0 {
+		mclk0-pins {
 			pins = "gpio26";
 			function = "cam_mclk0";
 
diff --git a/dts/src/arm64/qcom/msm8916-pm8916.dtsi b/dts/src/arm64/qcom/msm8916-pm8916.dtsi
index 539823b2c3..8cac23b524 100644
--- a/dts/src/arm64/qcom/msm8916-pm8916.dtsi
+++ b/dts/src/arm64/qcom/msm8916-pm8916.dtsi
@@ -47,7 +47,7 @@
 };
 
 &rpm_requests {
-	smd_rpm_regulators: pm8916-regulators {
+	smd_rpm_regulators: regulators {
 		compatible = "qcom,rpm-pm8916-regulators";
 
 		/* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
diff --git a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
index 3255bd3fcb..d600916a0e 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
@@ -23,6 +23,17 @@
 		};
 	};
 
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_pwm_default>;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -61,6 +72,24 @@
 		};
 	};
 
+	/*
+	 * NOTE: A5 connects GPIO 76 to a reglator powering the motor
+	 * driver IC but A3 connects the same signal to an ENABLE pin of
+	 * the driver.
+	 */
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_en_default>;
+	};
+
 	reg_vdd_tsp_a: regulator-vdd-tsp-a {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_tsp_a";
@@ -144,7 +173,7 @@
 			interrupt-parent = <&msmgpio>;
 			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
 
-			en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+			en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>;
 			wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
 
 			clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
@@ -153,6 +182,16 @@
 			pinctrl-0 = <&nfc_default &nfc_clk_req>;
 		};
 	};
+
+	vibrator: vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_motor_vdd>;
+		status = "disabled";
+	};
 };
 
 &blsp_i2c2 {
@@ -348,7 +387,7 @@
 };
 
 &msmgpio {
-	accel_int_default: accel-int-default {
+	accel_int_default: accel-int-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -356,7 +395,7 @@
 		bias-disable;
 	};
 
-	fg_alert_default: fg-alert-default {
+	fg_alert_default: fg-alert-default-state {
 		pins = "gpio121";
 		function = "gpio";
 
@@ -364,7 +403,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio109";
 		function = "gpio";
 
@@ -372,7 +411,7 @@
 		bias-pull-up;
 	};
 
-	gpio_hall_sensor_default: gpio-hall-sensor-default {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio52";
 		function = "gpio";
 
@@ -380,47 +419,60 @@
 		bias-disable;
 	};
 
-	mdss {
-		mdss_default: mdss-default {
-			pins = "gpio25";
-			function = "gpio";
+	mdss_default: mdss-default-state {
+		pins = "gpio25";
+		function = "gpio";
 
-			drive-strength = <8>;
-			bias-disable;
-		};
-		mdss_sleep: mdss-sleep {
-			pins = "gpio25";
-			function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
 
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
-	muic_i2c_default: muic-i2c-default {
-		pins = "gpio105", "gpio106";
+	motor_en_default: motor-en-default-stae {
+		pins = "gpio76";
 		function = "gpio";
 
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	muic_int_default: muic-int-default {
-		pins = "gpio12";
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
 		function = "gpio";
 
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	nfc_default: nfc-default {
-		pins = "gpio20", "gpio49";
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
 		function = "gpio";
 
 		drive-strength = <2>;
 		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
 
-		irq {
+		irq-pins {
 			pins = "gpio21";
 			function = "gpio";
 
@@ -429,7 +481,7 @@
 		};
 	};
 
-	nfc_i2c_default: nfc-i2c-default {
+	nfc_i2c_default: nfc-i2c-default-state {
 		pins = "gpio0", "gpio1";
 		function = "gpio";
 
@@ -437,7 +489,7 @@
 		bias-disable;
 	};
 
-	tkey_default: tkey-default {
+	tkey_default: tkey-default-state {
 		pins = "gpio98";
 		function = "gpio";
 
@@ -445,7 +497,7 @@
 		bias-disable;
 	};
 
-	tkey_i2c_default: tkey-i2c-default {
+	tkey_i2c_default: tkey-i2c-default-state {
 		pins = "gpio16", "gpio17";
 		function = "gpio";
 
@@ -453,7 +505,7 @@
 		bias-disable;
 	};
 
-	tsp_en_default: tsp-en-default {
+	tsp_en_default: tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
 
@@ -461,7 +513,7 @@
 		bias-disable;
 	};
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts b/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
index 6db5f78ca2..c691cca2eb 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
+++ b/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
@@ -81,6 +81,10 @@
 	};
 };
 
+&clk_pwm {
+	status = "okay";
+};
+
 &dsi0 {
 	panel@0 {
 		reg = <0>;
@@ -104,8 +108,12 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&vibrator {
+	status = "okay";
+};
+
 &msmgpio {
-	panel_vdd3_default: panel-vdd3-default {
+	panel_vdd3_default: panel-vdd3-default-state {
 		pins = "gpio9";
 		function = "gpio";
 
@@ -113,7 +121,7 @@
 		bias-disable;
 	};
 
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio86";
 		function = "gpio";
 
@@ -121,7 +129,7 @@
 		bias-disable;
 	};
 
-	tkey_led_en_default: tkey-led-en-default {
+	tkey_led_en_default: tkey-led-en-default-state {
 		pins = "gpio60";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts b/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts
index 5fb8ecd0c9..3dd8194587 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts
+++ b/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts
@@ -50,6 +50,10 @@
 	};
 };
 
+&clk_pwm {
+	status = "okay";
+};
+
 &pronto {
 	iris {
 		compatible = "qcom,wcn3660b";
@@ -61,8 +65,12 @@
 	vdd-supply = <&reg_touch_key>;
 };
 
+&vibrator {
+	status = "okay";
+};
+
 &msmgpio {
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi b/dts/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
index 542010fdfb..c95f0b4bc6 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/dts/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
@@ -26,19 +26,6 @@
 		};
 	};
 
-	reg_motor_vdd: regulator-motor-vdd {
-		compatible = "regulator-fixed";
-		regulator-name = "motor_vdd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&motor_en_default>;
-	};
-
 	reg_touch_key: regulator-touch-key {
 		compatible = "regulator-fixed";
 		regulator-name = "touch_key";
@@ -61,21 +48,18 @@
 	/delete-node/ magnetometer@12;
 };
 
+&reg_motor_vdd {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
 &touchkey {
 	vcc-supply = <&reg_touch_key>;
 	vdd-supply = <&reg_touch_key>;
 };
 
 &msmgpio {
-	motor_en_default: motor-en-default {
-		pins = "gpio76";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-samsung-grandmax.dts b/dts/src/arm64/qcom/msm8916-samsung-grandmax.dts
index bc71346989..a3d572d851 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-grandmax.dts
+++ b/dts/src/arm64/qcom/msm8916-samsung-grandmax.dts
@@ -46,7 +46,7 @@
 };
 
 &msmgpio {
-	gpio_leds_default: gpio-led-default {
+	gpio_leds_default: gpio-led-default-state {
 		pins = "gpio60";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-samsung-j5.dts b/dts/src/arm64/qcom/msm8916-samsung-j5.dts
index eabeed18cf..7ac49a0215 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-j5.dts
+++ b/dts/src/arm64/qcom/msm8916-samsung-j5.dts
@@ -199,7 +199,7 @@
 };
 
 &msmgpio {
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio109";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
index bbd6bb3f4f..d4984b3af8 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
+++ b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2019 Stephan Gerhold
+/*
+ * Copyright (C) 2019 Stephan Gerhold
+ */
 
 /dts-v1/;
 
@@ -422,7 +424,7 @@
 };
 
 &msmgpio {
-	fg_alert_default: fg-alert-default {
+	fg_alert_default: fg-alert-default-state {
 		pins = "gpio121";
 		function = "gpio";
 
@@ -430,7 +432,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio109";
 		function = "gpio";
 
@@ -438,7 +440,7 @@
 		bias-pull-up;
 	};
 
-	gpio_hall_sensor_default: gpio-hall-sensor-default {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio52";
 		function = "gpio";
 
@@ -446,7 +448,7 @@
 		bias-disable;
 	};
 
-	imu_irq_default: imu-irq-default {
+	imu_irq_default: imu-irq-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -454,7 +456,7 @@
 		bias-disable;
 	};
 
-	muic_i2c_default: muic-i2c-default {
+	muic_i2c_default: muic-i2c-default-state {
 		pins = "gpio105", "gpio106";
 		function = "gpio";
 
@@ -462,7 +464,7 @@
 		bias-disable;
 	};
 
-	muic_irq_default: muic-irq-default {
+	muic_irq_default: muic-irq-default-state {
 		pins = "gpio12";
 		function = "gpio";
 
@@ -470,14 +472,15 @@
 		bias-disable;
 	};
 
-	nfc_default: nfc-default {
-		pins = "gpio20", "gpio49";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
 
-		irq {
+			drive-strength = <2>;
+			bias-disable;
+		};
+		irq-pins {
 			pins = "gpio21";
 			function = "gpio";
 
@@ -486,7 +489,7 @@
 		};
 	};
 
-	nfc_i2c_default: nfc-i2c-default {
+	nfc_i2c_default: nfc-i2c-default-state {
 		pins = "gpio0", "gpio1";
 		function = "gpio";
 
@@ -494,7 +497,7 @@
 		bias-disable;
 	};
 
-	tkey_default: tkey-default {
+	tkey_default: tkey-default-state {
 		pins = "gpio98";
 		function = "gpio";
 
@@ -502,7 +505,7 @@
 		bias-disable;
 	};
 
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio86";
 		function = "gpio";
 
@@ -510,7 +513,7 @@
 		bias-disable;
 	};
 
-	tkey_i2c_default: tkey-i2c-default {
+	tkey_i2c_default: tkey-i2c-default-state {
 		pins = "gpio16", "gpio17";
 		function = "gpio";
 
@@ -518,7 +521,7 @@
 		bias-disable;
 	};
 
-	tkey_led_en_default: tkey-led-en-default {
+	tkey_led_en_default: tkey-led-en-default-state {
 		pins = "gpio60";
 		function = "gpio";
 
@@ -526,7 +529,7 @@
 		bias-disable;
 	};
 
-	tsp_en_default: tsp-en-default {
+	tsp_en_default: tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
 
@@ -534,7 +537,7 @@
 		bias-disable;
 	};
 
-	tsp_irq_default: tsp-irq-default {
+	tsp_irq_default: tsp-irq-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts b/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts
index 84a352dcf9..a87be1d95b 100644
--- a/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts
+++ b/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2020 Stephan Gerhold
+/*
+ * Copyright (C) 2020 Stephan Gerhold
+ */
 
 /dts-v1/;
 
@@ -21,6 +23,20 @@
 		stdout-path = "serial0";
 	};
 
+	flash-led-controller {
+		compatible = "ocs,ocp8110";
+		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_flash_default>;
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -272,7 +288,15 @@
 };
 
 &msmgpio {
-	gpio_keys_default: gpio-keys-default {
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -280,7 +304,7 @@
 		bias-pull-up;
 	};
 
-	imu_default: imu-default {
+	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -288,14 +312,15 @@
 		bias-disable;
 	};
 
-	touchscreen_default: touchscreen-default {
-		pins = "gpio13";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-pull-up;
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
 
-		reset {
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+		reset-pins {
 			pins = "gpio12";
 			function = "gpio";
 
@@ -304,7 +329,7 @@
 		};
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
 
diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi
index a831064700..2ca8e977fc 100644
--- a/dts/src/arm64/qcom/msm8916.dtsi
+++ b/dts/src/arm64/qcom/msm8916.dtsi
@@ -1046,7 +1046,6 @@
 					      "pixel",
 					      "core";
 				phys = <&dsi_phy0>;
-				phy-names = "dsi-phy";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1070,7 +1069,7 @@
 				};
 			};
 
-			dsi_phy0: dsi-phy@1a98300 {
+			dsi_phy0: phy@1a98300 {
 				compatible = "qcom,dsi-phy-28nm-lp";
 				reg = <0x01a98300 0xd4>,
 				      <0x01a98500 0x280>,
@@ -1264,21 +1263,21 @@
 			clock-names = "iface", "bus";
 			qcom,iommu-secure-id = <17>;
 
-			// vfe:
+			/* VFE */
 			iommu-ctx@3000 {
 				compatible = "qcom,msm-iommu-v1-sec";
 				reg = <0x3000 0x1000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			// mdp_0:
+			/* MDP_0 */
 			iommu-ctx@4000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x4000 0x1000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			// venus_ns:
+			/* VENUS_NS */
 			iommu-ctx@5000 {
 				compatible = "qcom,msm-iommu-v1-sec";
 				reg = <0x5000 0x1000>;
@@ -1297,14 +1296,14 @@
 			clock-names = "iface", "bus";
 			qcom,iommu-secure-id = <18>;
 
-			// gfx3d_user:
+			/* GFX3D_USER */
 			iommu-ctx@1000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x1000 0x1000>;
 				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			// gfx3d_priv:
+			/* GFX3D_PRIV */
 			iommu-ctx@2000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x2000 0x1000>;
@@ -1345,7 +1344,7 @@
 		};
 
 		mpss: remoteproc@4080000 {
-			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>,
 			      <0x04020000 0x040>;
 
@@ -1438,7 +1437,7 @@
 
 		lpass: audio-controller@7708000 {
 			status = "disabled";
-			compatible = "qcom,lpass-cpu-apq8016";
+			compatible = "qcom,apq8016-lpass-cpu";
 
 			/*
 			 * Note: Unlike the name would suggest, the SEC_I2S_CLK
diff --git a/dts/src/arm64/qcom/msm8953.dtsi b/dts/src/arm64/qcom/msm8953.dtsi
index 6b992a6d56..32349174c4 100644
--- a/dts/src/arm64/qcom/msm8953.dtsi
+++ b/dts/src/arm64/qcom/msm8953.dtsi
@@ -460,229 +460,229 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			uart_console_active: uart-console-active-pins {
+			uart_console_active: uart-console-active-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			uart_console_sleep: uart-console-sleep-pins {
+			uart_console_sleep: uart-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			sdc1_clk_on: sdc1-clk-on-pins {
+			sdc1_clk_on: sdc1-clk-on-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <16>;
 			};
 
-			sdc1_clk_off: sdc1-clk-off-pins {
+			sdc1_clk_off: sdc1-clk-off-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_cmd_on: sdc1-cmd-on-pins {
+			sdc1_cmd_on: sdc1-cmd-on-state {
 				pins = "sdc1_cmd";
 				bias-disable;
 				drive-strength = <10>;
 			};
 
-			sdc1_cmd_off: sdc1-cmd-off-pins {
+			sdc1_cmd_off: sdc1-cmd-off-state {
 				pins = "sdc1_cmd";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_data_on: sdc1-data-on-pins {
+			sdc1_data_on: sdc1-data-on-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc1_data_off: sdc1-data-off-pins {
+			sdc1_data_off: sdc1-data-off-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc1_rclk_on: sdc1-rclk-on-pins {
+			sdc1_rclk_on: sdc1-rclk-on-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc1_rclk_off: sdc1-rclk-off-pins {
+			sdc1_rclk_off: sdc1-rclk-off-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc2_clk_on: sdc2-clk-on-pins {
+			sdc2_clk_on: sdc2-clk-on-state {
 				pins = "sdc2_clk";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			sdc2_clk_off: sdc2-clk-off-pins {
+			sdc2_clk_off: sdc2-clk-off-state {
 				pins = "sdc2_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc2_cmd_on: sdc2-cmd-on-pins {
+			sdc2_cmd_on: sdc2-cmd-on-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_cmd_off: sdc2-cmd-off-pins {
+			sdc2_cmd_off: sdc2-cmd-off-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_data_on: sdc2-data-on-pins {
+			sdc2_data_on: sdc2-data-on-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_data_off: sdc2-data-off-pins {
+			sdc2_data_off: sdc2-data-off-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_cd_on: cd-on-pins {
+			sdc2_cd_on: cd-on-state {
 				pins = "gpio133";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			sdc2_cd_off: cd-off-pins {
+			sdc2_cd_off: cd-off-state {
 				pins = "gpio133";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			gpio_key_default: gpio-key-default-pins {
+			gpio_key_default: gpio-key-default-state {
 				pins = "gpio85";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c_1_default: i2c-1-default-pins {
+			i2c_1_default: i2c-1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_1_sleep: i2c-1-sleep-pins {
+			i2c_1_sleep: i2c-1-sleep-state {
 				pins = "gpio2", "gpio3";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_2_default: i2c-2-default-pins {
+			i2c_2_default: i2c-2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_2_sleep: i2c-2-sleep-pins {
+			i2c_2_sleep: i2c-2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_3_default: i2c-3-default-pins {
+			i2c_3_default: i2c-3-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_3_sleep: i2c-3-sleep-pins {
+			i2c_3_sleep: i2c-3-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_4_default: i2c-4-default-pins {
+			i2c_4_default: i2c-4-default-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_4_sleep: i2c-4-sleep-pins {
+			i2c_4_sleep: i2c-4-sleep-state {
 				pins = "gpio14", "gpio15";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_5_default: i2c-5-default-pins {
+			i2c_5_default: i2c-5-default-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_5_sleep: i2c-5-sleep-pins {
+			i2c_5_sleep: i2c-5-sleep-state {
 				pins = "gpio18", "gpio19";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_6_default: i2c-6-default-pins {
+			i2c_6_default: i2c-6-default-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_6_sleep: i2c-6-sleep-pins {
+			i2c_6_sleep: i2c-6-sleep-state {
 				pins = "gpio22", "gpio23";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_7_default: i2c-7-default-pins {
+			i2c_7_default: i2c-7-default-state {
 				pins = "gpio135", "gpio136";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_7_sleep: i2c-7-sleep-pins {
+			i2c_7_sleep: i2c-7-sleep-state {
 				pins = "gpio135", "gpio136";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_8_default: i2c-8-default-pins {
+			i2c_8_default: i2c-8-default-state {
 				pins = "gpio98", "gpio99";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_8_sleep: i2c-8-sleep-pins {
+			i2c_8_sleep: i2c-8-sleep-state {
 				pins = "gpio98", "gpio99";
 				function = "gpio";
 				drive-strength = <2>;
@@ -726,6 +726,250 @@
 			reg = <0x193f044 0x4>;
 		};
 
+		mdss: mdss@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x1a00000 0x1000>,
+			      <0x1ab0000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: mdp@1a01000 {
+				compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
+				reg = <0x1a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&dsi1_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x1a94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>,
+							 <&dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x1a94400 0x100>,
+				      <0x1a94500 0x300>,
+				      <0x1a94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			dsi1: dsi@1a96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x1a96000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&dsi1_phy 0>,
+							 <&dsi1_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&dsi1_phy>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi1_phy: phy@1a96400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x1a96400 0x100>,
+				      <0x1a96500 0x300>,
+				      <0x1a96800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		apps_iommu: iommu@1e00000 {
+			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
+			ranges  = <0 0x1e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x200f000 0x1000>,
diff --git a/dts/src/arm64/qcom/msm8956-sony-xperia-loire-kugo.dts b/dts/src/arm64/qcom/msm8956-sony-xperia-loire-kugo.dts
new file mode 100644
index 0000000000..3fb8e23e43
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8956-sony-xperia-loire-kugo.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X Compact";
+	compatible = "sony,kugo-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	/* FUSB301 USB-C Controller */
+};
+
+&blsp2_i2c4 {
+	status = "okay";
+
+	/* ST STMVL53L0 ToF @ 29 */
+	/* AMS TCS349 RGBCIR @ 72 */
+};
+
+&pm8950_l1 {
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1300000>;
+};
diff --git a/dts/src/arm64/qcom/msm8956-sony-xperia-loire-suzu.dts b/dts/src/arm64/qcom/msm8956-sony-xperia-loire-suzu.dts
new file mode 100644
index 0000000000..87d657f680
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8956-sony-xperia-loire-suzu.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X";
+	compatible = "sony,suzu-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
diff --git a/dts/src/arm64/qcom/msm8956-sony-xperia-loire.dtsi b/dts/src/arm64/qcom/msm8956-sony-xperia-loire.dtsi
new file mode 100644
index 0000000000..67baced639
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8956-sony-xperia-loire.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8956.dtsi"
+
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+	qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
+	qcom,board-id = <8 0>;
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		cont-splash@83000000 {
+			reg = <0x0 0x83000000 0x0 0x2800000>;
+		};
+
+		ramoops@57f00000 {
+			compatible = "ramoops";
+			reg = <0 0x57f00000 0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	usbphy_1p2: regulator-usbphy-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbphy-1p2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vph_pwr>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* Synaptics RMI4 @ 2c */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&otg {
+	status = "okay";
+};
+
+&pm8004_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 1 supply */
+	pm8004_s2: s2 {
+		/* regulator-min-microvolt = <500000>; */
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc1";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pm8004_s5: s5 {
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-enable-ramp-delay = <500>;
+		regulator-name = "vdd_gfx";
+		/* Hack this on until the gpu driver is ready for it */
+		regulator-always-on;
+	};
+};
+
+&pm8950_spmi_regulators {
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 0 supply */
+	pm8950_spmi_s5: s5 {
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		/* regulator-min-microvolt = <790000>; */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc0";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	pm8950_regulators: regulators {
+		compatible = "qcom,rpm-pm8950-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_l1_l19-supply = <&pm8950_s3>;
+		vdd_l2_l23-supply = <&pm8950_s3>;
+		vdd_l3-supply = <&pm8950_s3>;
+		vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+		pm8950_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1162500>;
+		};
+
+		pm8950_s3: s3 {
+			regulator-min-microvolt = <1325000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-always-on;
+		};
+
+		pm8950_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8950_l1: l1 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8950_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <290000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-system-load = <130000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l9: l9 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2400000>;
+		};
+
+		pm8950_l10: l10 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <60000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8950_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l17: l17 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8950_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	/* Toshiba THGBMHG8C4LBAU7 (032G34) */
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&pm8950_l8>;
+	vqmmc-supply = <&pm8950_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	bus-width = <4>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8950_l11>;
+	vqmmc-supply = <&pm8950_l12>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+};
+
+&usb_hs_phy {
+	vdd-supply = <&usbphy_1p2>;
+	vdda1p8-supply = <&pm8950_l7>;
+	vdda3p3-supply = <&pm8950_l13>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/msm8956.dtsi b/dts/src/arm64/qcom/msm8956.dtsi
new file mode 100644
index 0000000000..e432512d87
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8956.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8976.dtsi"
+
+&pmu {
+	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+};
+
+/*
+ * You might be wondering.. why is it so empty out there?
+ * Well, the SoCs are almost identical.
+ */
diff --git a/dts/src/arm64/qcom/msm8976.dtsi b/dts/src/arm64/qcom/msm8976.dtsi
new file mode 100644
index 0000000000..05dcb30b07
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8976.dtsi
@@ -0,0 +1,1198 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8976.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <181>;
+				exit-latency-us = <149>;
+				min-residency-us = <703>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-retention";
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <142>;
+				exit-latency-us = <99>;
+				min-residency-us = <242>;
+			};
+
+			big_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <158>;
+				exit-latency-us = <144>;
+				min-residency-us = <863>;
+				local-timer-stop;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8976", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ext-region@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86c00000 {
+			reg = <0x0 0x86c00000 0x0 0x5600000>;
+			no-map;
+		};
+
+		lpass_mem: lpass@8c200000 {
+			reg = <0x0 0x8c200000 0x0 0x1800000>;
+			no-map;
+		};
+
+		venus_mem: memory@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x2600000>;
+			no-map;
+		};
+
+		tz-apps@8dd00000 {
+			reg = <0x0 0x8dd00000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+		qcom,smem = <443>, <429>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 13>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+		qcom,smem = <435>, <428>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 17>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+		qcom,smem = <451>, <431>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8976";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8976-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+
+						rpmpd_opp_turbo_high: opp111 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 12>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 18>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <0 290 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x140>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc RST_QUSB2_PHY_BCR>,
+				 <&gcc RST_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8976-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_caldata: caldata@218 {
+				reg = <0x218 0x18>;
+			};
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8976-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_caldata>;
+			nvmem-cell-names = "calib";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8976-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 145>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			spi1_default: spi0-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "blsp_spi1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi1_sleep: spi0-sleep-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart2_active: blsp2-uart2-active-state {
+				pins = "gpio20", "gpio21";
+				function = "blsp_uart6";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio20", "gpio21";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			/* 4 (not 6!) interfaces per QUP, BLSP2 indexes are numbered (n)+4 */
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8976";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			assigned-clocks = <&gcc GPLL3>;
+			assigned-clock-rates = <1100000000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "xo_a",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,msm8976-tcsr", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		sdhc_1: mmc@7824000 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864000 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi1_default>;
+			pinctrl-1 = <&spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		otg: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc RST_USB_HS_BCR>;
+			reset-names = "core";
+			ahb-burst-config = <0>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		sdhc_3: mmc@7a24000 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07a24900 0x11c>, <0x07a24000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart2: serial@7af0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07af0000 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@7af6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c4: i2c@7af8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af8000 0x600>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c4_default>;
+			pinctrl-1 = <&blsp2_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8976-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>, <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		imem: sram@8600000 {
+			compatible = "qcom,msm8976-imem", "syscon", "simple-mfd";
+			reg = <0x08600000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		qdsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+			trips {
+				qdsp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cam-isp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+			trips {
+				cam_isp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu4_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu4_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu5_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu5_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu6_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu6_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu7_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu7_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		big-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				l2_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				l2_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				l2_crit: l2-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				gpu_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-10.dts b/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-10.dts
index 7e6bce4af4..4159fc3557 100644
--- a/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-10.dts
+++ b/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git a/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-101.dts b/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-101.dts
index e6a5ebd30e..ad9702dd17 100644
--- a/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-101.dts
+++ b/dts/src/arm64/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git a/dts/src/arm64/qcom/msm8992-lg-bullhead.dtsi b/dts/src/arm64/qcom/msm8992-lg-bullhead.dtsi
index 71e373b11d..87c90e9366 100644
--- a/dts/src/arm64/qcom/msm8992-lg-bullhead.dtsi
+++ b/dts/src/arm64/qcom/msm8992-lg-bullhead.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
+/*
+ * Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
  * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
  */
@@ -58,7 +59,7 @@
 };
 
 &rpm_requests {
-	pm8994_regulators: pm8994-regulators {
+	pm8994_regulators: regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_l1-supply = <&pm8994_s1>;
@@ -236,9 +237,11 @@
 		};
 
 		pm8994_l26: l26 {
-			/* TODO: value from downstream
-			regulator-min-microvolt = <987500>;
-			fails to apply */
+			/*
+			 * TODO: value from downstream
+			 * regulator-min-microvolt = <987500>;
+			 * fails to apply
+			 */
 		};
 
 		pm8994_l27: l27 {
@@ -252,19 +255,19 @@
 		};
 
 		pm8994_l29: l29 {
-			/* TODO: Unsupported voltage range.
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			qcom,init-voltage = <2800000>;
-			*/
+			/*
+			 * TODO: Unsupported voltage range.
+			 * regulator-min-microvolt = <2800000>;
+			 * regulator-max-microvolt = <2800000>;
+			 */
 		};
 
 		pm8994_l30: l30 {
-			/* TODO: get this verified
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
+			/*
+			 * TODO: get this verified
+			 * regulator-min-microvolt = <1800000>;
+			 * regulator-max-microvolt = <1800000>;
+			 */
 		};
 
 		pm8994_l31: l31 {
@@ -273,15 +276,15 @@
 		};
 
 		pm8994_l32: l32 {
-			/* TODO: get this verified
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
+			/*
+			 * TODO: get this verified
+			 * regulator-min-microvolt = <1800000>;
+			 * regulator-max-microvolt = <1800000>;
+			 */
 		};
 	};
 
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
diff --git a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts
index c4e87d0aec..b242c272d2 100644
--- a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts
+++ b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts
@@ -153,7 +153,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_l1-supply = <&pm8994_s7>;
@@ -363,7 +363,7 @@
 		pm8994_lvs2: lvs2 {};
 	};
 
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 		vdd_s1-supply = <&vph_pwr>;
 		vdd_bst_byp-supply = <&vph_pwr>;
diff --git a/dts/src/arm64/qcom/msm8992.dtsi b/dts/src/arm64/qcom/msm8992.dtsi
index 750643763a..10adb4986e 100644
--- a/dts/src/arm64/qcom/msm8992.dtsi
+++ b/dts/src/arm64/qcom/msm8992.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
  */
 
 #include "msm8994.dtsi"
diff --git a/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts b/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts
index dbfbb77e9f..85abff0e9b 100644
--- a/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts
+++ b/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, Huawei Inc. All rights reserved.
+/*
+ * Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
  * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
  */
diff --git a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
index f9d8bd09e0..9b67f0d382 100644
--- a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -551,7 +551,7 @@
 
 &rpm_requests {
 	/* These values were taken from the original firmware ACPI tables */
-	pm8994_regulators: pm8994-regulators {
+	pm8994_regulators: regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -835,7 +835,7 @@
 		vreg_lvs2a_1p8: lvs2 { };
 	};
 
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -881,28 +881,28 @@
 };
 
 &tlmm {
-	grip_default: grip-default {
+	grip_default: grip-default-state {
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <6>;
 		bias-pull-down;
 	};
 
-	grip_sleep: grip-sleep {
+	grip_sleep: grip-sleep-state {
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	hall_front_default: hall-front-default {
+	hall_front_default: hall-front-default-state {
 		pins = "gpio42";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	hall_back_default: hall-back-default {
+	hall_back_default: hall-back-default-state {
 		pins = "gpio75";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
index ff60b7004d..f3d153c349 100644
--- a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -186,7 +186,7 @@
 
 &rpm_requests {
 	/* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-0 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -205,7 +205,7 @@
 		};
 	};
 
-	pm8994_regulators: pm8994-regulators {
+	pm8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s3-supply = <&vph_pwr>;
@@ -477,15 +477,17 @@
 };
 
 &tlmm {
-	ts_int_active: ts-int-active {
+	ts_int_active: ts-int-active-state {
 		pins = "gpio42";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 		input-enable;
 	};
 
-	ts_reset_active: ts-reset-active {
+	ts_reset_active: ts-reset-active-state {
 		pins = "gpio109";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 		output-low;
diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi
index ded5b7ceea..9ff9d35496 100644
--- a/dts/src/arm64/qcom/msm8994.dtsi
+++ b/dts/src/arm64/qcom/msm8994.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -553,7 +554,6 @@
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			spi-max-frequency = <19200000>;
 			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
 			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
@@ -691,7 +691,6 @@
 			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
-			spi-max-frequency = <19200000>;
 			dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
 			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
@@ -773,254 +772,256 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_uart2_default: blsp1-uart2-default {
-				function = "blsp_uart2";
+			blsp1_uart2_default: blsp1-uart2-default-state {
 				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp1_uart2_sleep: blsp1-uart2-sleep {
-				function = "gpio";
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
 				pins = "gpio4", "gpio5";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_uart2_default: blsp2-uart2-default {
+			blsp2_uart2_default: blsp2-uart2-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
 				function = "blsp_uart8";
-				pins = "gpio45", "gpio46",
-						"gpio47", "gpio48";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_uart2_sleep: blsp2-uart2-sleep {
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
 				function = "gpio";
-				pins = "gpio45", "gpio46",
-						"gpio47", "gpio48";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c1_default: i2c1-default {
-				function = "blsp_i2c1";
+			i2c1_default: i2c1-default-state {
 				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c1_sleep: i2c1-sleep {
-				function = "gpio";
+			i2c1_sleep: i2c1-sleep-state {
 				pins = "gpio2", "gpio3";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c2_default: i2c2-default {
-				function = "blsp_i2c2";
+			i2c2_default: i2c2-default-state {
 				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c2_sleep: i2c2-sleep {
-				function = "gpio";
+			i2c2_sleep: i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c4_default: i2c4-default {
-				function = "blsp_i2c4";
+			i2c4_default: i2c4-default-state {
 				pins = "gpio19", "gpio20";
+				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c4_sleep: i2c4-sleep {
-				function = "gpio";
+			i2c4_sleep: i2c4-sleep-state {
 				pins = "gpio19", "gpio20";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 				input-enable;
 			};
 
-			i2c5_default: i2c5-default {
-				function = "blsp_i2c5";
+			i2c5_default: i2c5-default-state {
 				pins = "gpio23", "gpio24";
+				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c5_sleep: i2c5-sleep {
-				function = "gpio";
+			i2c5_sleep: i2c5-sleep-state {
 				pins = "gpio23", "gpio24";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c6_default: i2c6-default {
-				function = "blsp_i2c6";
+			i2c6_default: i2c6-default-state {
 				pins = "gpio28", "gpio27";
+				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c6_sleep: i2c6-sleep {
-				function = "gpio";
+			i2c6_sleep: i2c6-sleep-state {
 				pins = "gpio28", "gpio27";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c7_default: i2c7-default {
-				function = "blsp_i2c7";
+			i2c7_default: i2c7-default-state {
 				pins = "gpio44", "gpio43";
+				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c7_sleep: i2c7-sleep {
-				function = "gpio";
+			i2c7_sleep: i2c7-sleep-state {
 				pins = "gpio44", "gpio43";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_spi10_default: blsp2-spi10-default {
-				default {
-					function = "blsp_spi10";
+			blsp2_spi10_default: blsp2-spi10-default-state {
+				default-pins {
 					pins = "gpio53", "gpio54", "gpio55";
+					function = "blsp_spi10";
 					drive-strength = <10>;
 					bias-pull-down;
 				};
-				cs {
+
+				cs-pins {
+					pins = "gpio67";
 					function = "gpio";
-					pins = "gpio55";
 					drive-strength = <2>;
 					bias-disable;
 				};
 			};
 
-			blsp2_spi10_sleep: blsp2-spi10-sleep {
+			blsp2_spi10_sleep: blsp2-spi10-sleep-state {
 				pins = "gpio53", "gpio54", "gpio55";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c11_default: i2c11-default {
-				function = "blsp_i2c11";
+			i2c11_default: i2c11-default-state {
 				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c11_sleep: i2c11-sleep {
-				function = "gpio";
+			i2c11_sleep: i2c11-sleep-state {
 				pins = "gpio83", "gpio84";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_spi1_default: blsp1-spi1-default {
-				default {
-					function = "blsp_spi1";
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				default-pins {
 					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
 					drive-strength = <10>;
 					bias-pull-down;
 				};
-				cs {
-					function = "gpio";
+
+				cs-pins {
 					pins = "gpio8";
+					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 			};
 
-			blsp1_spi1_sleep: blsp1-spi1-sleep {
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
 				pins = "gpio0", "gpio1", "gpio3";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			sdc1_clk_on: clk-on {
+			sdc1_clk_on: clk-on-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <16>;
 			};
 
-			sdc1_clk_off: clk-off {
+			sdc1_clk_off: clk-off-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_cmd_on: cmd-on {
+			sdc1_cmd_on: cmd-on-state {
 				pins = "sdc1_cmd";
 				bias-pull-up;
 				drive-strength = <8>;
 			};
 
-			sdc1_cmd_off: cmd-off {
+			sdc1_cmd_off: cmd-off-state {
 				pins = "sdc1_cmd";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc1_data_on: data-on {
+			sdc1_data_on: data-on-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <8>;
 			};
 
-			sdc1_data_off: data-off {
+			sdc1_data_off: data-off-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc1_rclk_on: rclk-on {
+			sdc1_rclk_on: rclk-on-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc1_rclk_off: rclk-off {
+			sdc1_rclk_off: rclk-off-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc2_clk_on: sdc2-clk-on {
+			sdc2_clk_on: sdc2-clk-on-state {
 				pins = "sdc2_clk";
 				bias-disable;
 				drive-strength = <10>;
 			};
 
-			sdc2_clk_off: sdc2-clk-off {
+			sdc2_clk_off: sdc2-clk-off-state {
 				pins = "sdc2_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc2_cmd_on: sdc2-cmd-on {
+			sdc2_cmd_on: sdc2-cmd-on-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_cmd_off: sdc2-cmd-off {
+			sdc2_cmd_off: sdc2-cmd-off-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_data_on: sdc2-data-on {
+			sdc2_data_on: sdc2-data-on-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_data_off: sdc2-data-off {
+			sdc2_data_off: sdc2-data-off-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <2>;
diff --git a/dts/src/arm64/qcom/msm8996-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8996-oneplus-common.dtsi
new file mode 100644
index 0000000000..20f5c103c6
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8996-oneplus-common.dtsi
@@ -0,0 +1,787 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		constant-charge-current-max-microamp = <3000000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		div1_mclk: div1-clk {
+			compatible = "gpio-gate-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&audio_mclk>;
+			#clock-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		divclk4: div4-clk {
+			compatible = "fixed-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+		};
+	};
+
+	reserved-memory {
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0 0xac000000 0 0x200000>;
+			record-size = <0x20000>;
+			console-size = <0x100000>;
+			pmsg-size = <0x80000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: wlan-en-regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	tfa9890_amp: audio-codec@36 {
+		compatible = "nxp,tfa9890";
+		reg = <0x36>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq27541: fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_gpios>;
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	synaptics_rmi4_i2c: touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touch_default>;
+		pinctrl-1 = <&touch_suspend>;
+		vdd-supply = <&vreg_l22a_3p0>;
+		vio-supply = <&vreg_s4a_1p8>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+	status = "okay";
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&dsi0 {
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l22a_3p0>;
+	status = "okay";
+};
+
+&dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&hsusb_phy2 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	pll-supply = <&vreg_l12a_1p8>;
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	status = "okay";
+};
+
+&pm8994_gpios {
+	bt_en_gpios: bt-en-gpios-state {
+		pins = "gpio19";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	wlan_en_gpios: wlan-en-gpios-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	audio_mclk: divclk1-state {
+		pins = "gpio15";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		power-source = <PM8994_GPIO_S4>;
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pins = "gpio18";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+
+	s9 {
+		qcom,saw-slave;
+	};
+
+	s10 {
+		qcom,saw-slave;
+	};
+
+	s11 {
+		qcom,saw-leader;
+		regulator-min-microvolt = <1140000>;
+		regulator-max-microvolt = <1140000>;
+		regulator-max-step-microvolt = <150000>;
+		regulator-always-on;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-name = "vdd-gfx";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <1230000>;
+	};
+};
+
+&q6asmdai {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		vreg_s7a_0p8: s7 {
+			regulator-name = "vreg_s7a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p1: l3 {
+			regulator-name = "vreg_l3a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		vreg_l17a_2p6: l17 {
+			regulator-name = "vreg_l17a_2p6";
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+		};
+
+		vreg_l18a_3p3: l18 {
+			regulator-name = "vreg_l18a_3p3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-name = "vreg_l19a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		vreg_l27a_1p2: l27 {
+			regulator-name = "vreg_l27a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&slpi_pil {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "OnePlus3";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"MIC BIAS2", "Headset Mic",
+			"AMIC4", "MIC BIAS1",
+			"MIC BIAS1", "Primary Mic",
+			"AMIC5", "MIC BIAS3",
+			"MIC BIAS3", "Noise Mic";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	mm7-dai-link {
+		link-name = "MultiMedia7";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>;
+		};
+	};
+
+	mm8-dai-link {
+		link-name = "MultiMedia8";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>;
+		};
+	};
+
+	mm9-dai-link {
+		link-name = "MultiMedia9";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>;
+		};
+	};
+
+	mm10-dai-link {
+		link-name = "MultiMedia10";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>;
+		};
+	};
+
+	mm11-dai-link {
+		link-name = "MultiMedia11";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>;
+		};
+	};
+
+	mm12-dai-link {
+		link-name = "MultiMedia12";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>;
+		};
+	};
+
+	mm13-dai-link {
+		link-name = "MultiMedia13";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>;
+		};
+	};
+
+	mm14-dai-link {
+		link-name = "MultiMedia14";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>;
+		};
+	};
+
+	mm15-dai-link {
+		link-name = "MultiMedia15";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>;
+		};
+	};
+
+	mm16-dai-link {
+		link-name = "MultiMedia16";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+
+	speaker-dai-link {
+		link-name = "Speaker";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		codec {
+			sound-dai = <&tfa9890_amp>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <81 4>;
+
+	mdss_dsi_active: mdss-dsi-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend: mdss-dsi-suspend-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default: touch-default-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	touch_suspend: touch-suspend-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+
+	maximum-speed = "high-speed";
+};
+
+&venus {
+	status = "okay";
+};
+
+&wcd9335 {
+	clock-names = "mclk", "slimbus";
+	clocks = <&div1_mclk>,
+		 <&rpmcc RPM_SMD_BB_CLK1>;
+
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+};
diff --git a/dts/src/arm64/qcom/msm8996-oneplus3.dts b/dts/src/arm64/qcom/msm8996-oneplus3.dts
new file mode 100644
index 0000000000..1bdc1b1343
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8996-oneplus3.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3";
+	compatible = "oneplus,oneplus3", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15801 15>, <8 0 15801 16>;
+	qcom,msm-id = <246 0x30001>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3/adsp.mbn";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3000000>;
+	voltage-max-design-microvolt = <4350000>;
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3/mba.mbn",
+			"qcom/msm8996/oneplus3/modem.mbn";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3/venus.mbn";
+};
diff --git a/dts/src/arm64/qcom/msm8996-oneplus3t.dts b/dts/src/arm64/qcom/msm8996-oneplus3t.dts
new file mode 100644
index 0000000000..34f837dd0c
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8996-oneplus3t.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3T";
+	compatible = "oneplus,oneplus3t", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15811 26>,
+			<8 0 15811 27>,
+			<8 0 15811 28>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3400000>;
+	voltage-max-design-microvolt = <4400000>;
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/mba.mbn",
+			"qcom/msm8996/oneplus3t/modem.mbn";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3t/venus.mbn";
+};
diff --git a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi
index ca7c8d2e1d..dec361b93c 100644
--- a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi
@@ -629,7 +629,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -847,28 +847,28 @@
 	pinctrl-0 = <&sw_service_gpio>;
 	pinctrl-names = "default";
 
-	disp_reset_n_gpio: disp-reset-n {
+	disp_reset_n_gpio: disp-reset-n-state {
 		pins = "gpio8";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	mdp_vsync_p_gpio: mdp-vsync-p {
+	mdp_vsync_p_gpio: mdp-vsync-p-state {
 		pins = "gpio10";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	sw_service_gpio: sw-service-gpio {
+	sw_service_gpio: sw-service-gpio-state {
 		pins = "gpio16";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
-	usb_detect: usb-detect {
+	usb_detect: usb-detect-state {
 		pins = "gpio25";
 		function = "gpio";
 		drive-strength = <2>;
@@ -876,7 +876,7 @@
 		output-high;
 	};
 
-	uim_detect_en: uim-detect-en {
+	uim_detect_en: uim-detect-en-state {
 		pins = "gpio29";
 		function = "gpio";
 		drive-strength = <2>;
@@ -884,14 +884,14 @@
 		output-high;
 	};
 
-	tray_det_pin: tray-det {
+	tray_det_pin: tray-det-state {
 		pins = "gpio40";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	tp_vddio_en: tp-vddio-en {
+	tp_vddio_en: tp-vddio-en-state {
 		pins = "gpio50";
 		function = "gpio";
 		drive-strength = <2>;
@@ -899,7 +899,7 @@
 		output-high;
 	};
 
-	lcd_vddio_en: lcd-vddio-en {
+	lcd_vddio_en: lcd-vddio-en-state {
 		pins = "gpio51";
 		function = "gpio";
 		drive-strength = <2>;
@@ -907,15 +907,14 @@
 		output-low;
 	};
 
-	wl_host_wake: wl-host-wake {
+	wl_host_wake: wl-host-wake-state {
 		pins = "gpio79";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
-		input-high;
 	};
 
-	wl_reg_on: wl-reg-on {
+	wl_reg_on: wl-reg-on-state {
 		pins = "gpio84";
 		function = "gpio";
 		drive-strength = <2>;
@@ -923,20 +922,20 @@
 		output-low;
 	};
 
-	ts_reset_n: ts-rst-n {
+	ts_reset_n: ts-rst-n-state {
 		pins = "gpio89";
 		function = "gpio";
 		drive-strength = <2>;
 	};
 
-	touch_int_n: touch-int-n {
+	touch_int_n: touch-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
-	touch_int_sleep: touch-int-sleep {
+	touch_int_sleep: touch-int-sleep-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi
index 7781918608..5b47b8de69 100644
--- a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi
+++ b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi
@@ -3,9 +3,6 @@
  * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
  */
 
-/dts-v1/;
-
-#include "msm8996.dtsi"
 #include "pm8994.dtsi"
 #include "pmi8994.dtsi"
 #include <dt-bindings/input/input.h>
@@ -413,7 +410,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -598,7 +595,7 @@
 		};
 	};
 
-	pmi8994-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -694,35 +691,35 @@
 };
 
 &tlmm {
-	mdss_dsi_default: mdss_dsi_default {
+	mdss_dsi_default: mdss-dsi-default-state {
 		pins = "gpio8";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	mdss_dsi_sleep: mdss_dsi_sleep {
+	mdss_dsi_sleep: mdss-dsi-sleep-state {
 		pins = "gpio8";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	mdss_te_default: mdss_te_default {
+	mdss_te_default: mdss-te-default-state {
 		pins = "gpio10";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	mdss_te_sleep: mdss_te_sleep {
+	mdss_te_sleep: mdss-te-sleep-state {
 		pins = "gpio10";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	nfc_default: nfc_default {
+	nfc_default: nfc-default-state {
 		pins = "gpio12", "gpio21";
 		function = "gpio";
 		drive-strength = <16>;
diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts
index 4e5264f411..d873491348 100644
--- a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts
+++ b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "msm8996.dtsi"
 #include "msm8996-xiaomi-common.dtsi"
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -219,7 +220,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		vreg_l17a_2p8: l17 {
 			regulator-name = "vreg_l17a_2p8";
 			regulator-min-microvolt = <2500000>;
@@ -445,28 +446,28 @@
 		"RFFE1_DATA",		/* GPIO_148 */
 		"RFFE1_CLK";		/* GPIO_149 */
 
-	touchscreen_default: touchscreen_default {
+	touchscreen_default: touchscreen-default-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <10>;
 		bias-pull-up;
 	};
 
-	touchscreen_sleep: touchscreen_sleep {
+	touchscreen_sleep: touchscreen-sleep-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	vibrator_default: vibrator_default {
+	vibrator_default: vibrator-default-state {
 		pins = "gpio93";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	vibrator_sleep: vibrator_sleep {
+	vibrator_sleep: vibrator-sleep-state {
 		pins = "gpio93";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi
index aba7176443..d31464204f 100644
--- a/dts/src/arm64/qcom/msm8996.dtsi
+++ b/dts/src/arm64/qcom/msm8996.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -144,82 +145,92 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-422400000 {
 			opp-hz = /bits/ 64 <422400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-844800000 {
 			opp-hz = /bits/ 64 <844800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-960000000 {
 			opp-hz = /bits/ 64 <960000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1228800000 {
 			opp-hz = /bits/ 64 <1228800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xd>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x2>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xd>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x9>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-supported-hw = <0x04>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1593600000 {
 			opp-hz = /bits/ 64 <1593600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x9>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -232,127 +243,137 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-883200000 {
 			opp-hz = /bits/ 64 <883200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1708800000 {
 			opp-hz = /bits/ 64 <1708800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-supported-hw = <0xe>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1824000000 {
 			opp-hz = /bits/ 64 <1824000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x4>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1920000000 {
 			opp-hz = /bits/ 64 <1920000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2150400000 {
 			opp-hz = /bits/ 64 <2150400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -860,9 +881,9 @@
 				 <&gcc GPLL0>,
 				 <&dsi0_phy 1>,
 				 <&dsi0_phy 0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&hdmi_phy>;
 			clock-names = "xo",
 				      "gcc_mmss_noc_cfg_ahb_clk",
 				      "gpll0",
@@ -993,7 +1014,6 @@
 				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -1018,7 +1038,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@994400 {
+			dsi0_phy: phy@994400 {
 				compatible = "qcom,dsi-phy-14nm";
 				reg = <0x00994400 0x100>,
 				      <0x00994500 0x300>,
@@ -1061,7 +1081,6 @@
 				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
 				phys = <&dsi1_phy>;
-				phy-names = "dsi";
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -1086,7 +1105,7 @@
 				};
 			};
 
-			dsi1_phy: dsi-phy@996400 {
+			dsi1_phy: phy@996400 {
 				compatible = "qcom,dsi-phy-14nm";
 				reg = <0x00996400 0x100>,
 				      <0x00996500 0x300>,
@@ -1145,7 +1164,7 @@
 				};
 			};
 
-			hdmi_phy: hdmi-phy@9a0600 {
+			hdmi_phy: phy@9a0600 {
 				#phy-cells = <0>;
 				compatible = "qcom,hdmi-phy-8996";
 				reg = <0x009a0600 0x1c4>,
@@ -1213,17 +1232,17 @@
 				compatible = "operating-points-v2";
 
 				/*
-				 * 624Mhz and 560Mhz are only available on speed
-				 * bin (1 << 0). All the rest are available on
-				 * all bins of the hardware
+				 * 624Mhz is only available on speed bins 0 and 3.
+				 * 560Mhz is only available on speed bins 0, 2 and 3.
+				 * All the rest are available on all bins of the hardware.
 				 */
 				opp-624000000 {
 					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x09>;
 				};
 				opp-560000000 {
 					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x0d>;
 				};
 				opp-510000000 {
 					opp-hz = /bits/ 64 <510000000>;
@@ -1262,15 +1281,15 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_spi1_default: blsp1-spi1-default {
-				spi {
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				spi-pins {
 					pins = "gpio0", "gpio1", "gpio3";
 					function = "blsp_spi1";
 					drive-strength = <12>;
 					bias-disable;
 				};
 
-				cs {
+				cs-pins {
 					pins = "gpio2";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1279,42 +1298,56 @@
 				};
 			};
 
-			blsp1_spi1_sleep: blsp1-spi1-sleep {
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_uart2_2pins_default: blsp2-uart1-2pins {
+			blsp2_uart2_2pins_default: blsp2-uart2-2pins-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart8";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep {
+			blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_default: blsp2-i2c2 {
+			blsp2_i2c2_default: blsp2-i2c2-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			cci0_default: cci0-default {
+			blsp1_i2c6_default: blsp1-i2c6-state {
+				pins = "gpio27", "gpio28";
+				function = "blsp_i2c6";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio27", "gpio28";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_default: cci0-default-state {
 				pins = "gpio17", "gpio18";
 				function = "cci_i2c";
 				drive-strength = <16>;
@@ -1322,22 +1355,22 @@
 			};
 
 			camera0_state_on:
-			camera_rear_default: camera-rear-default {
-				camera0_mclk: mclk0 {
+			camera_rear_default: camera-rear-default-state {
+				camera0_mclk: mclk0-pins {
 					pins = "gpio13";
 					function = "cam_mclk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				camera0_rst: rst {
+				camera0_rst: rst-pins {
 					pins = "gpio25";
 					function = "gpio";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				camera0_pwdn: pwdn {
+				camera0_pwdn: pwdn-pins {
 					pins = "gpio26";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1345,7 +1378,7 @@
 				};
 			};
 
-			cci1_default: cci1-default {
+			cci1_default: cci1-default-state {
 				pins = "gpio19", "gpio20";
 				function = "cci_i2c";
 				drive-strength = <16>;
@@ -1353,22 +1386,22 @@
 			};
 
 			camera1_state_on:
-			camera_board_default: camera-board-default {
-				mclk1 {
+			camera_board_default: camera-board-default-state {
+				mclk1-pins {
 					pins = "gpio14";
 					function = "cam_mclk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				pwdn {
+				pwdn-pins {
 					pins = "gpio98";
 					function = "gpio";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				rst {
+				rst-pins {
 					pins = "gpio104";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1377,22 +1410,22 @@
 			};
 
 			camera2_state_on:
-			camera_front_default: camera-front-default {
-				camera2_mclk: mclk2 {
+			camera_front_default: camera-front-default-state {
+				camera2_mclk: mclk2-pins {
 					pins = "gpio15";
 					function = "cam_mclk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				camera2_rst: rst {
+				camera2_rst: rst-pins {
 					pins = "gpio23";
 					function = "gpio";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				pwdn {
+				pwdn-pins {
 					pins = "gpio133";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1400,22 +1433,22 @@
 				};
 			};
 
-			pcie0_state_on: pcie0-state-on {
-				perst {
+			pcie0_state_on: pcie0-state-on-state {
+				perst-pins {
 					pins = "gpio35";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio36";
 					function = "pci_e0";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio37";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1423,22 +1456,22 @@
 				};
 			};
 
-			pcie0_state_off: pcie0-state-off {
-				perst {
+			pcie0_state_off: pcie0-state-off-state {
+				perst-pins {
 					pins = "gpio35";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio36";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio37";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1446,63 +1479,63 @@
 				};
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
+			blsp1_uart2_default: blsp1-uart2-default-state {
 				pins = "gpio41", "gpio42", "gpio43", "gpio44";
 				function = "blsp_uart2";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp1_uart2_sleep: blsp1-uart2-sleep {
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
 				pins = "gpio41", "gpio42", "gpio43", "gpio44";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_default: blsp1-i2c2-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
 				pins = "gpio47", "gpio48";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_uart3_4pins_default: blsp2-uart2-4pins {
+			blsp2_uart3_4pins_default: blsp2-uart3-4pins-state {
 				pins = "gpio49", "gpio50", "gpio51", "gpio52";
 				function = "blsp_uart9";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
+			blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state {
 				pins = "gpio49", "gpio50", "gpio51", "gpio52";
 				function = "blsp_uart9";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c3_default: blsp2-i2c3 {
+			blsp2_i2c3_default: blsp2-i2c3-state-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
 				pins = "gpio51", "gpio52";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			wcd_intr_default: wcd-intr-default{
+			wcd_intr_default: wcd-intr-default-state {
 				pins = "gpio54";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1510,21 +1543,21 @@
 				input-enable;
 			};
 
-			blsp2_i2c1_default: blsp2-i2c1 {
+			blsp2_i2c1_default: blsp2-i2c1-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c1_sleep: blsp2-i2c0-sleep {
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
 				pins = "gpio55", "gpio56";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c5_default: blsp2-i2c5 {
+			blsp2_i2c5_default: blsp2-i2c5-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
@@ -1533,7 +1566,7 @@
 
 			/* Sleep state for BLSP2_I2C5 is missing.. */
 
-			cdc_reset_active: cdc-reset-active {
+			cdc_reset_active: cdc-reset-active-state {
 				pins = "gpio64";
 				function = "gpio";
 				drive-strength = <16>;
@@ -1541,7 +1574,7 @@
 				output-high;
 			};
 
-			cdc_reset_sleep: cdc-reset-sleep {
+			cdc_reset_sleep: cdc-reset-sleep-state {
 				pins = "gpio64";
 				function = "gpio";
 				drive-strength = <16>;
@@ -1549,15 +1582,15 @@
 				output-low;
 			};
 
-			blsp2_spi6_default: blsp2-spi5-default {
-				spi {
+			blsp2_spi6_default: blsp2-spi6-default-state {
+				spi-pins {
 					pins = "gpio85", "gpio86", "gpio88";
 					function = "blsp_spi12";
 					drive-strength = <12>;
 					bias-disable;
 				};
 
-				cs {
+				cs-pins {
 					pins = "gpio87";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1566,43 +1599,43 @@
 				};
 			};
 
-			blsp2_spi6_sleep: blsp2-spi5-sleep {
+			blsp2_spi6_sleep: blsp2-spi6-sleep-state {
 				pins = "gpio85", "gpio86", "gpio87", "gpio88";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_i2c6_default: blsp2-i2c6 {
+			blsp2_i2c6_default: blsp2-i2c6-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c12";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				pins = "gpio87", "gpio88";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			pcie1_state_on: pcie1-state-on {
-				perst {
+			pcie1_state_on: pcie1-on-state {
+				perst-pins {
 					pins = "gpio130";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio131";
 					function = "pci_e1";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio132";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1610,16 +1643,16 @@
 				};
 			};
 
-			pcie1_state_off: pcie1-state-off {
+			pcie1_state_off: pcie1-off-state {
 				/* Perst is missing? */
-				clkreq {
+				clkreq-pins {
 					pins = "gpio131";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio132";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1627,22 +1660,22 @@
 				};
 			};
 
-			pcie2_state_on: pcie2-state-on {
-				perst {
+			pcie2_state_on: pcie2-on-state {
+				perst-pins {
 					pins = "gpio114";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio115";
 					function = "pci_e2";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio116";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1650,16 +1683,16 @@
 				};
 			};
 
-			pcie2_state_off: pcie2-state-off {
+			pcie2_state_off: pcie2-off-state {
 				/* Perst is missing? */
-				clkreq {
+				clkreq-pins {
 					pins = "gpio115";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio116";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1667,90 +1700,90 @@
 				};
 			};
 
-			sdc1_state_on: sdc1-state-on {
-				clk {
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc1_state_off: sdc1-state-off {
-				clk {
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc2_state_on: sdc2-clk-on {
-				clk {
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 			};
 
-			sdc2_state_off: sdc2-clk-off {
-				clk {
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <2>;
@@ -1995,10 +2028,6 @@
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
 			status = "disabled";
-
-			ufs_variant {
-				compatible = "qcom,ufs_variant";
-			};
 		};
 
 		ufsphy: phy@627000 {
@@ -2205,9 +2234,9 @@
 				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
 			#iommu-cells = <1>;
 
-			clocks = <&mmcc GPU_AHB_CLK>,
-				 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>,
+				 <&mmcc GPU_AHB_CLK>;
+			clock-names = "bus", "iface";
 
 			power-domains = <&mmcc GPU_GDSC>;
 		};
@@ -2272,9 +2301,9 @@
 				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
 			#iommu-cells = <1>;
-			clocks = <&mmcc SMMU_MDP_AHB_CLK>,
-				 <&mmcc SMMU_MDP_AXI_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&mmcc SMMU_MDP_AXI_CLK>,
+				 <&mmcc SMMU_MDP_AHB_CLK>;
+			clock-names = "bus", "iface";
 
 			power-domains = <&mmcc MDSS_GDSC>;
 		};
@@ -2292,9 +2321,9 @@
 				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
-			clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
-				 <&mmcc SMMU_VIDEO_AXI_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&mmcc SMMU_VIDEO_AXI_CLK>,
+				 <&mmcc SMMU_VIDEO_AHB_CLK>;
+			clock-names = "bus", "iface";
 			#iommu-cells = <1>;
 			status = "okay";
 		};
@@ -2308,10 +2337,9 @@
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
-			clocks = <&mmcc SMMU_VFE_AHB_CLK>,
-				 <&mmcc SMMU_VFE_AXI_CLK>;
-			clock-names = "iface",
-				      "bus";
+			clocks = <&mmcc SMMU_VFE_AXI_CLK>,
+				 <&mmcc SMMU_VFE_AHB_CLK>;
+			clock-names = "bus", "iface";
 			#iommu-cells = <1>;
 		};
 
@@ -2336,9 +2364,9 @@
 		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
 		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
 
-			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
-				 <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>,
+				 <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>;
+			clock-names = "bus", "iface";
 		};
 
 		slpi_pil: remoteproc@1c00000 {
@@ -3127,6 +3155,23 @@
 			status = "disabled";
 		};
 
+		blsp1_i2c6: i2c@757a000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x757a000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp2_dma: dma-controller@7584000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07584000 0x2b000>;
@@ -3309,27 +3354,25 @@
 			qcom,num-ees = <2>;
 		};
 
-		slim_msm: slim@91c0000 {
+		slim_msm: slim-ngd@91c0000 {
 			compatible = "qcom,slim-ngd-v1.5.0";
 			reg = <0x091c0000 0x2C000>;
-			reg-names = "ctrl";
 			interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&slimbam 3>, <&slimbam 4>,
-				<&slimbam 5>, <&slimbam 6>;
-			dma-names = "rx", "tx", "tx2", "rx2";
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			ngd@1 {
+			slim@1 {
 				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <1>;
+				#address-cells = <2>;
+				#size-cells = <0>;
 
-				tasha_ifd: tas-ifd {
+				tasha_ifd: tas-ifd@0,0 {
 					compatible = "slim217,1a0";
 					reg = <0 0>;
 				};
 
-				wcd9335: codec@1{
+				wcd9335: codec@1,0 {
 					pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
 					pinctrl-names = "default";
 
@@ -3342,7 +3385,7 @@
 					interrupt-names = "intr1", "intr2";
 					interrupt-controller;
 					#interrupt-cells = <1>;
-					reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+					reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
 
 					slim-ifc-dev = <&tasha_ifd>;
 
@@ -3393,12 +3436,12 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					q6core {
+					service@3 {
 						reg = <APR_SVC_ADSP_CORE>;
 						compatible = "qcom,q6core";
 					};
 
-					q6afe: q6afe {
+					q6afe: service@4 {
 						compatible = "qcom,q6afe";
 						reg = <APR_SVC_AFE>;
 						q6afedai: dais {
@@ -3406,13 +3449,13 @@
 							#address-cells = <1>;
 							#size-cells = <0>;
 							#sound-dai-cells = <1>;
-							hdmi@1 {
+							dai@1 {
 								reg = <1>;
 							};
 						};
 					};
 
-					q6asm: q6asm {
+					q6asm: service@7 {
 						compatible = "qcom,q6asm";
 						reg = <APR_SVC_ASM>;
 						q6asmdai: dais {
@@ -3424,7 +3467,7 @@
 						};
 					};
 
-					q6adm: q6adm {
+					q6adm: service@8 {
 						compatible = "qcom,q6adm";
 						reg = <APR_SVC_ADM>;
 						q6routing: routing {
diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-natrium.dts b/dts/src/arm64/qcom/msm8996pro-xiaomi-natrium.dts
index ff4673ee9e..d18d0b0eda 100644
--- a/dts/src/arm64/qcom/msm8996-xiaomi-natrium.dts
+++ b/dts/src/arm64/qcom/msm8996pro-xiaomi-natrium.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "msm8996pro.dtsi"
 #include "msm8996-xiaomi-common.dtsi"
 #include "pmi8996.dtsi"
 #include <dt-bindings/sound/qcom,q6afe.h>
@@ -12,7 +13,7 @@
 
 / {
 	model = "Xiaomi Mi 5s Plus";
-	compatible = "xiaomi,natrium", "qcom,msm8996";
+	compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996";
 	chassis-type = "handset";
 	qcom,msm-id = <305 0x10000>;
 	qcom,board-id = <47 0>;
@@ -164,7 +165,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		vreg_l3a_0p875: l3 {
 			regulator-name = "vreg_l3a_0p875";
 			regulator-min-microvolt = <850000>;
@@ -398,14 +399,14 @@
 		"RFFE1_DATA",		/* GPIO_148 */
 		"RFFE1_CLK";		/* GPIO_149 */
 
-	touchscreen_default: touchscreen-default {
+	touchscreen_default: touchscreen-default-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <10>;
 		bias-pull-up;
 	};
 
-	touchscreen_sleep: touchscreen-sleep {
+	touchscreen_sleep: touchscreen-sleep-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts b/dts/src/arm64/qcom/msm8996pro-xiaomi-scorpio.dts
index 79be5fb129..5e3b9130e9 100644
--- a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts
+++ b/dts/src/arm64/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "msm8996pro.dtsi"
 #include "msm8996-xiaomi-common.dtsi"
 #include "pmi8996.dtsi"
 #include <dt-bindings/sound/qcom,q6afe.h>
@@ -13,7 +14,7 @@
 
 / {
 	model = "Xiaomi Mi Note 2";
-	compatible = "xiaomi,scorpio", "qcom,msm8996";
+	compatible = "xiaomi,scorpio", "qcom,msm8996pro", "qcom,msm8996";
 	chassis-type = "handset";
 	qcom,msm-id = <305 0x10000>;
 	qcom,board-id = <34 0>;
@@ -216,7 +217,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		vreg_l3a_0p875: l3 {
 			regulator-name = "vreg_l3a_0p875";
 			regulator-min-microvolt = <850000>;
@@ -468,28 +469,28 @@
 		"RFFE1_DATA",		/* GPIO_148 */
 		"RFFE1_CLK";		/* GPIO_149 */
 
-	touchkey_default: touchkey_default {
+	touchkey_default: touchkey-default-state {
 		pins = "gpio77";
 		function = "gpio";
 		drive-strength = <16>;
 		bias-pull-up;
 	};
 
-	touchkey_sleep: touchkey_sleep {
+	touchkey_sleep: touchkey-sleep-state {
 		pins = "gpio77";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	touchscreen_default: touchscreen_default {
+	touchscreen_default: touchscreen-default-state {
 		pins = "gpio75", "gpio125";
 		function = "gpio";
 		drive-strength = <10>;
 		bias-pull-up;
 	};
 
-	touchscreen_sleep: touchscreen_sleep {
+	touchscreen_sleep: touchscreen-sleep-state {
 		pins = "gpio75", "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/dts/src/arm64/qcom/msm8996pro.dtsi b/dts/src/arm64/qcom/msm8996pro.dtsi
new file mode 100644
index 0000000000..a679a9c0cf
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8996pro.dtsi
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	/delete-node/ opp-table-cluster0;
+	/delete-node/ opp-table-cluster1;
+
+	/*
+	 * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+	 * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+	 * becomes 0x20, speed 2 becomes 0x40.
+	 */
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+};
+
+&gpu_opp_table {
+	/*
+	 * Unlike CPU opp tables, the GPU driver does not shift speed bins.
+	 *
+	 * 652.8 Mhz is available on speed bin 0 only.
+	 * 624 Mhz and 560 Mhz are available on speed bins 0 and 1.
+	 * All the rest are available on all bins of the hardware (like on
+	 * plain 8996).
+	 */
+
+	opp-652800000 {
+		opp-hz = /bits/ 64 <652800000>;
+		opp-supported-hw = <0x01>;
+	};
+	opp-624000000 {
+		opp-hz = /bits/ 64 <624000000>;
+		opp-supported-hw = <0x03>;
+	};
+	opp-560000000 {
+		opp-hz = /bits/ 64 <560000000>;
+		opp-supported-hw = <0x03>;
+	};
+	/* The rest is inherited from msm8996 */
+};
diff --git a/dts/src/arm64/qcom/msm8998-clamshell.dtsi b/dts/src/arm64/qcom/msm8998-clamshell.dtsi
index 7928b81974..3b7172aa40 100644
--- a/dts/src/arm64/qcom/msm8998-clamshell.dtsi
+++ b/dts/src/arm64/qcom/msm8998-clamshell.dtsi
@@ -35,7 +35,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -46,7 +46,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -137,7 +137,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -357,8 +357,9 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	touchpad: touchpad-pin {
+	touchpad: touchpad-pin-state {
 		pins = "gpio123";
+		function = "gpio";
 		bias-pull-up;
 	};
 };
diff --git a/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts b/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts
index 429ba57e20..310f7a2df1 100644
--- a/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts
+++ b/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts
@@ -216,7 +216,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -227,7 +227,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -310,15 +310,11 @@
 };
 
 &funnel4 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &funnel5 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &pcie0 {
@@ -390,7 +386,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -588,7 +584,7 @@
 
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
@@ -615,14 +611,14 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>;
 
-	mdp_vsync_n: mdp-vsync-n {
+	mdp_vsync_n: mdp-vsync-n-state {
 		pins = "gpio10";
 		function = "mdp_vsync_a";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
 
-	gpio_kb_pins_extra: gpio-kb-pins-extra {
+	gpio_kb_pins_extra: gpio-kb-pins-extra-state {
 		pins = "gpio21", "gpio32", "gpio33", "gpio114",
 		       "gpio128", "gpio129";
 		function = "gpio";
@@ -630,21 +626,21 @@
 		bias-pull-up;
 	};
 
-	ts_vio_default: ts-vio-def {
+	ts_vio_default: ts-vio-def-state {
 		pins = "gpio81";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ts_rst_n: ts-rst-n {
+	ts_rst_n: ts-rst-n-state {
 		pins = "gpio89";
 		function = "gpio";
 		bias-pull-up;
 		drive-strength = <8>;
 	};
 
-	hall_sensor1_default: hall-sensor1-def {
+	hall_sensor1_default: hall-sensor1-def-state {
 		pins = "gpio124";
 		function = "gpio";
 		bias-disable;
@@ -652,7 +648,7 @@
 		input-enable;
 	};
 
-	ts_int_n: ts-int-n {
+	ts_int_n: ts-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		bias-disable;
diff --git a/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts b/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts
index cf81c33a9d..a105143bee 100644
--- a/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts
+++ b/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts
@@ -28,8 +28,8 @@
 };
 
 &remoteproc_mss {
-	firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn",
-			"qcom/LENOVO/81F1/qcdsp28998.mbn";
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcdsp1v28998.mbn",
+			"qcom/msm8998/LENOVO/81F1/qcdsp28998.mbn";
 };
 
 &sdhc2 {
diff --git a/dts/src/arm64/qcom/msm8998-mtp.dts b/dts/src/arm64/qcom/msm8998-mtp.dts
index a3ca58100a..453a1c9e98 100644
--- a/dts/src/arm64/qcom/msm8998-mtp.dts
+++ b/dts/src/arm64/qcom/msm8998-mtp.dts
@@ -46,7 +46,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -57,7 +57,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -124,15 +124,11 @@
 };
 
 &funnel4 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &funnel5 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &pcie0 {
@@ -168,7 +164,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -366,7 +362,7 @@
 
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
diff --git a/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts b/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts
index ef2a88a64d..9fb1fb9b85 100644
--- a/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts
@@ -22,7 +22,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&button_backlight_default>;
 
-		button-backlight {
+		led-keypad-backlight {
 			gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_WHITE>;
 			function = LED_FUNCTION_KBD_BACKLIGHT;
@@ -33,11 +33,9 @@
 
 &pmi8998_gpio {
 	button_backlight_default: button-backlight-state {
-		pinconf {
-			pins = "gpio5";
-			function = "normal";
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-		};
+		pins = "gpio5";
+		function = "gpio";
+		bias-pull-down;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 };
diff --git a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi
index 62bda23791..7d4a67d075 100644
--- a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi
+++ b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi
@@ -233,7 +233,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 46 (RX). This is needed to
@@ -244,7 +244,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -279,6 +279,10 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 &qusb2phy {
 	status = "okay";
 
@@ -288,7 +292,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -477,7 +481,7 @@
 		vreg_lvs2a_1p8: lvs2 { };
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
@@ -492,7 +496,7 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	hall_sensor_default: hall-sensor-default {
+	hall_sensor_default: hall-sensor-default-state {
 		pins = "gpio124";
 		function = "gpio";
 		drive-strength = <2>;
@@ -500,28 +504,28 @@
 		input-enable;
 	};
 
-	ts_int_active: ts-int-active {
+	ts_int_active: ts-int-active-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	ts_reset_active: ts-reset-active {
+	ts_reset_active: ts-reset-active-state {
 		pins = "gpio89";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	nfc_int_active: nfc-int-active {
+	nfc_int_active: nfc-int-active-state {
 		pins = "gpio92";
 		function = "gpio";
 		drive-strength = <6>;
 		bias-pull-up;
 	};
 
-	nfc_enable_active: nfc-enable-active {
+	nfc_enable_active: nfc-enable-active-state {
 		pins = "gpio12", "gpio116";
 		function = "gpio";
 		drive-strength = <6>;
diff --git a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
index d086390822..5da87baa2b 100644
--- a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -375,7 +375,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -410,135 +410,166 @@
 			regulator-min-microvolt = <1352000>;
 			regulator-max-microvolt = <1352000>;
 		};
+
 		vreg_s4a_1p8: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-system-load = <100000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_s5a_2p04: s5 {
 			regulator-min-microvolt = <1904000>;
 			regulator-max-microvolt = <2032000>;
 		};
+
 		vreg_s7a_1p025: s7 {
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1028000>;
 		};
+
 		vreg_l1a_0p875: l1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-system-load = <73400>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l2a_1p2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-system-load = <12560>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l3a_1p0: l3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
+
 		vreg_l5a_0p8: l5 {
 			regulator-min-microvolt = <800000>;
 			regulator-max-microvolt = <800000>;
 		};
+
 		vreg_l6a_1p8: l6 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l7a_1p8: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l8a_1p2: l8 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 		};
+
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 		};
+
 		vreg_l10a_1p8: l10 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 		};
+
 		vreg_l11a_1p0: l11 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
+
 		vreg_l12a_1p8: l12 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l13a_2p95: l13 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l14a_1p85: l14 {
 			regulator-min-microvolt = <1848000>;
 			regulator-max-microvolt = <1856000>;
 			regulator-system-load = <32000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l15a_1p8: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l16a_2p7: l16 {
 			regulator-min-microvolt = <2704000>;
 			regulator-max-microvolt = <2704000>;
 		};
+
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1304000>;
 		};
-		vreg_l18a_2p85: l18 {};
+
+		vreg_l18a_2p85: l18 { };
+
 		vreg_l19a_2p7: l19 {
 			regulator-min-microvolt = <2696000>;
 			regulator-max-microvolt = <2704000>;
 		};
+
 		vreg_l20a_2p95: l20 {
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-system-load = <10000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l21a_2p95: l21 {
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-system-load = <800000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l22a_2p85: l22 { };
+
 		vreg_l23a_3p3: l23 {
 			regulator-min-microvolt = <3312000>;
 			regulator-max-microvolt = <3312000>;
 		};
+
 		vreg_l24a_3p075: l24 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
 		};
+
 		vreg_l25a_3p3: l25 {
 			regulator-min-microvolt = <3104000>;
 			regulator-max-microvolt = <3312000>;
 		};
+
 		vreg_l26a_1p2: l26 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l28_3p0: l28 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 		};
+
 		vreg_lvs1a_1p8: lvs1 { };
+
 		vreg_lvs2a_1p8: lvs2 { };
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
@@ -565,14 +596,14 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	mdp_vsync_n: mdp-vsync-n {
+	mdp_vsync_n: mdp-vsync-n-state {
 		pins = "gpio10";
 		function = "mdp_vsync_a";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	nfc_ven: nfc-ven {
+	nfc_ven: nfc-ven-state {
 		pins = "gpio12";
 		function = "gpio";
 		bias-disable;
@@ -580,42 +611,42 @@
 		output-low;
 	};
 
-	msm_mclk0_default: msm-mclk0-active {
+	msm_mclk0_default: msm-mclk0-active-state {
 		pins = "gpio13";
 		function = "cam_mclk";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	msm_mclk1_default: msm-mclk1-active {
+	msm_mclk1_default: msm-mclk1-active-state {
 		pins = "gpio14";
 		function = "cam_mclk";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	cci0_default: cci0-default {
+	cci0_default: cci0-default-state {
 		pins = "gpio18", "gpio19";
 		function = "cci_i2c";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cci1_default: cci1-default {
+	cci1_default: cci1-default-state {
 		pins = "gpio19", "gpio20";
 		function = "cci_i2c";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cam0_vdig_default: cam0-vdig-default {
+	cam0_vdig_default: cam0-vdig-default-state {
 		pins = "gpio21";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	tof_int: tof-int {
+	tof_int: tof-int-state {
 		pins = "gpio22";
 		function = "gpio";
 		bias-pull-up;
@@ -623,28 +654,28 @@
 		input-enable;
 	};
 
-	cam1_vdig_default: cam1-vdig-default {
+	cam1_vdig_default: cam1-vdig-default-state {
 		pins = "gpio25";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	usb_extcon_active: usb-extcon-active {
+	usb_extcon_active: usb-extcon-active-state {
 		pins = "gpio38";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <16>;
 	};
 
-	tof_reset: tof-reset {
+	tof_reset: tof-reset-state {
 		pins = "gpio27";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	hall_sensor0_default: acc-cover-open {
+	hall_sensor0_default: acc-cover-open-state {
 		pins = "gpio124";
 		function = "gpio";
 		bias-disable;
@@ -652,14 +683,14 @@
 		input-enable;
 	};
 
-	ts_int_n: ts-int-n {
+	ts_int_n: ts-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	usb_vbus_active: usb-vbus-active {
+	usb_vbus_active: usb-vbus-active-state {
 		pins = "gpio128";
 		function = "gpio";
 		bias-disable;
@@ -667,7 +698,7 @@
 		output-low;
 	};
 
-	ts_vddio_en: ts-vddio-en-default {
+	ts_vddio_en: ts-vddio-en-default-state {
 		pins = "gpio133";
 		function = "gpio";
 		bias-disable;
diff --git a/dts/src/arm64/qcom/msm8998-xiaomi-sagit.dts b/dts/src/arm64/qcom/msm8998-xiaomi-sagit.dts
new file mode 100644
index 0000000000..b1aac7311e
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8998-xiaomi-sagit.dts
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Xiaomi Mi 6 (sagit) device tree source based on msm8998-mtp.dtsi
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Degdag Mohamed <degdagmohamed@gmail.com>
+ * Copyright (c) 2022, Dzmitry Sankouski <dsankouski@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete following upstream (msm8998.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	model = "Xiaomi Mi 6";
+	compatible = "xiaomi,sagit", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <30 0>;
+
+	reserved-memory {
+		/*
+		 * Xiaomi's ADSP firmware requires 30 MiB in total, so increase the adsp_mem
+		 * region by 4 MiB to account for this while relocating the other now
+		 * conflicting memory nodes accordingly.
+		 */
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8d000000 {
+			reg = <0x0 0x8d000000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@94000000 {
+			reg = <0x0 0x94000000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94500000 {
+			reg = <0x0 0x94500000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94700000 {
+			reg = <0x0 0x94700000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95610000 {
+			reg = <0x0 0x95610000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95615000 {
+			reg = <0x0 0x95615000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95715000 {
+			reg = <0x0 0x95715000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* For getting crash logs using Android downstream kernels */
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xac000000 0x0 0x200000>;
+			console-size = <0x80000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x8000>;
+			ftrace-size = <0x20000>;
+		};
+
+		/*
+		 * The following memory regions on downstream are "dynamically allocated"
+		 * but given the same addresses every time. Hard code them as these addresses
+		 * are where the Xiaomi signed firmware expects them to be.
+		 */
+		ipa_fws_region: memory@f7800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7800000 0x0 0x5000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f7900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7900000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume buttons";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_key_default>;
+
+		key-vol-up {
+			label = "Volume up";
+			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor_default_state>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	disp_vddts_vreg: disp-vddts-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "disp-vddts-regulator";
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c5 {
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ts_active_state>;
+		pinctrl-1 = <&ts_int_suspend_state &ts_reset_suspend_state>;
+
+		vdd-supply = <&disp_vddts_vreg>;
+		vio-supply = <&vreg_l6a_1p8>;
+
+		syna,reset-delay-ms = <20>;
+		syna,startup-delay-ms = <20>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <64>;
+			touchscreen-y-mm = <114>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <20>;
+		};
+
+		rmi4-f1a@1a {
+			reg = <0x1a>;
+			syna,codes = <KEY_BACK KEY_APPSELECT>;
+		};
+	};
+};
+
+&blsp1_i2c5_sleep {
+	/delete-property/ bias-pull-up;
+	bias-disable;
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 46 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	compatible = "qcom,pm8005-regulators";
+
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpio {
+	vol_up_key_default: vol-up-key-default-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	audio_mclk_pin: audio-mclk-pin-active-state {
+		pins = "gpio13";
+		function = "func2";
+		power-source = <0>;
+	};
+};
+
+&qusb2phy {
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	cci1_default_state: cci1-default-state {
+		pins = "gpio19", "gpio20";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cdc_reset_n_state: cdc-reset-n-state {
+		pins = "gpio64";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <16>;
+		output-high;
+	};
+
+	hall_sensor_default_state: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	mdss_dsi_active_state: mdss-dsi-active-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend_state: mdss-dsi-suspend-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active_state: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend_state: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk0_active_state: msm-mclk0-active-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk0_suspend_state: msm-mclk0-suspend-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk1_active_state: msm-mclk1-active-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk1_suspend_state: msm-mclk1-suspend-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_int_active_state: nfc-int-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_int_suspend_state: nfc-int-suspend-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_active_state: nfc-enable-active-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_suspend_state: nfc-enable-suspend-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	ts_active_state: ts-active-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	ts_int_suspend_state: ts-int-suspend-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_reset_suspend_state: ts-reset-suspend-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_int_n_state: wcd-int-n-state {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+		input-enable;
+	};
+
+	wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
+		pins = "gpio65";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	wsa_rightspk_pwr_n_state: wsa-rightspk-pwr-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+	status = "okay";
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+};
+
+&usb3 {
+	/* Disable USB3 clock requirement as the device only supports USB2 */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	/* Drop the unused USB 3 PHY */
+	phys = <&qusb2phy>;
+	phy-names = "usb2-phy";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Force to peripheral until we can switch modes */
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi
index f05f16ac5c..539382dab0 100644
--- a/dts/src/arm64/qcom/msm8998.dtsi
+++ b/dts/src/arm64/qcom/msm8998.dtsi
@@ -900,7 +900,7 @@
 		};
 
 		pcie0: pci@1c00000 {
-			compatible = "qcom,pcie-msm8996";
+			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg =	<0x01c00000 0x2000>,
 				<0x1b000000 0xf1d>,
 				<0x1b000f20 0xa8>,
@@ -929,11 +929,11 @@
 					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
-				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_0_AUX_CLK>;
-			clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux";
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+			clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
@@ -1056,81 +1056,82 @@
 			compatible = "qcom,msm8998-pinctrl";
 			reg = <0x03400000 0xc00000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 150>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			sdc2_on: sdc2-on {
-				clk {
+			sdc2_on: sdc2-on-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 			};
 
-			sdc2_off: sdc2-off {
-				clk {
+			sdc2_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 			};
 
-			sdc2_cd: sdc2-cd {
+			sdc2_cd: sdc2-cd-state {
 				pins = "gpio95";
 				function = "gpio";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			blsp1_uart3_on: blsp1-uart3-on {
-				tx {
+			blsp1_uart3_on: blsp1-uart3-on-state {
+				tx-pins {
 					pins = "gpio45";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx {
+				rx-pins {
 					pins = "gpio46";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cts {
+				cts-pins {
 					pins = "gpio47";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rfr {
+				rfr-pins {
 					pins = "gpio48";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
@@ -1138,168 +1139,168 @@
 				};
 			};
 
-			blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c2_default: blsp1-i2c2-default {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c4_default: blsp1-i2c4-default {
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c4_sleep: blsp1-i2c4-sleep {
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c5_default: blsp1-i2c5-default {
+			blsp1_i2c5_default: blsp1-i2c5-default-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c5_sleep: blsp1-i2c5-sleep {
+			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c6_default: blsp1-i2c6-default {
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
 				pins = "gpio43", "gpio44";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
 				pins = "gpio43", "gpio44";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
-			blsp2_i2c1_default: blsp2-i2c1-default {
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c1_sleep: blsp2-i2c1-sleep {
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c2_default: blsp2-i2c2-default {
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c3_default: blsp2-i2c3-default {
+			blsp2_i2c3_default: blsp2-i2c3-default-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c4_default: blsp2-i2c4-default {
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
 				pins = "gpio67", "gpio68";
 				function = "blsp_i2c10";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c4_sleep: blsp2-i2c4-sleep {
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
 				pins = "gpio67", "gpio68";
 				function = "blsp_i2c10";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c5_default: blsp2-i2c5-default {
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c6_default: blsp2-i2c6-default {
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
@@ -1903,7 +1904,7 @@
 
 			cpu = <&CPU4>;
 
-			port{
+			port {
 				etm4_out: endpoint {
 					remote-endpoint = <&apss_funnel_in4>;
 				};
@@ -1920,7 +1921,7 @@
 
 			cpu = <&CPU5>;
 
-			port{
+			port {
 				etm5_out: endpoint {
 					remote-endpoint = <&apss_funnel_in5>;
 				};
@@ -1937,7 +1938,7 @@
 
 			cpu = <&CPU6>;
 
-			port{
+			port {
 				etm6_out: endpoint {
 					remote-endpoint = <&apss_funnel_in6>;
 				};
@@ -1954,7 +1955,7 @@
 
 			cpu = <&CPU7>;
 
-			port{
+			port {
 				etm7_out: endpoint {
 					remote-endpoint = <&apss_funnel_in7>;
 				};
diff --git a/dts/src/arm64/qcom/pm6125.dtsi b/dts/src/arm64/qcom/pm6125.dtsi
new file mode 100644
index 0000000000..1c8ccda26f
--- /dev/null
+++ b/dts/src/arm64/qcom/pm6125.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6125-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6125_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6125_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				linux,code = <KEY_POWER>;
+				bias-pull-up;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm6125_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6125_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6125_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#io-channel-cells = <1>;
+
+			ref-gnd@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vref-1p25@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			die-temp@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph-pwr@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+			};
+
+			vcoin@85 {
+				reg = <ADC5_VCOIN>;
+				qcom,pre-scaling = <1 3>;
+			};
+
+			xo-therm@4c {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+			};
+		};
+
+		pm6125_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pm6125_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		pm6125_gpio: gpio@c000 {
+			compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6125_gpio 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+	};
+};
diff --git a/dts/src/arm64/qcom/pm6150.dtsi b/dts/src/arm64/qcom/pm6150.dtsi
index 8a4972e6a2..3d91fb405c 100644
--- a/dts/src/arm64/qcom/pm6150.dtsi
+++ b/dts/src/arm64/qcom/pm6150.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause
-// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
 
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/input/linux-event-codes.h>
@@ -86,7 +88,7 @@
 			status = "disabled";
 		};
 
-		pm6150_gpio: gpios@c000 {
+		pm6150_gpio: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm6150l.dtsi b/dts/src/arm64/qcom/pm6150l.dtsi
index f02c223ef4..90aac61ad2 100644
--- a/dts/src/arm64/qcom/pm6150l.dtsi
+++ b/dts/src/arm64/qcom/pm6150l.dtsi
@@ -1,10 +1,43 @@
 // SPDX-License-Identifier: BSD-3-Clause
-// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
 
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm6150l-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pm6150l_lsid4: pmic@4 {
 		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
@@ -12,6 +45,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm6150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm6150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
@@ -55,7 +95,7 @@
 			status = "disabled";
 		};
 
-		pm6150l_gpio: gpios@c000 {
+		pm6150l_gpio: gpio@c000 {
 			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm6350.dtsi b/dts/src/arm64/qcom/pm6350.dtsi
index ecf9b99191..3a2a841e83 100644
--- a/dts/src/arm64/qcom/pm6350.dtsi
+++ b/dts/src/arm64/qcom/pm6350.dtsi
@@ -3,8 +3,40 @@
  * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
  */
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm6350-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6350_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@0 {
 		compatible = "qcom,pm6350", "qcom,spmi-pmic";
@@ -35,7 +67,14 @@
 			};
 		};
 
-		pm6350_gpios: gpios@c000 {
+		pm6350_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6350_gpios: gpio@c000 {
 			compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm660.dtsi b/dts/src/arm64/qcom/pm660.dtsi
index e1622b16c0..fc0eccaccd 100644
--- a/dts/src/arm64/qcom/pm660.dtsi
+++ b/dts/src/arm64/qcom/pm660.dtsi
@@ -163,14 +163,14 @@
 				qcom,pre-scaling = <1 3>;
 			};
 
-			vcoin: vcoin@83 {
+			vcoin: vcoin@85 {
 				reg = <ADC5_VCOIN>;
 				qcom,decimation = <1024>;
 				qcom,pre-scaling = <1 3>;
 			};
 		};
 
-		pm660_gpios: gpios@c000 {
+		pm660_gpios: gpio@c000 {
 			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm660l.dtsi b/dts/src/arm64/qcom/pm660l.dtsi
index 8aa0a50787..f9b3864bd3 100644
--- a/dts/src/arm64/qcom/pm660l.dtsi
+++ b/dts/src/arm64/qcom/pm660l.dtsi
@@ -48,7 +48,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm660l_gpios: gpios@c000 {
+		pm660l_gpios: gpio@c000 {
 			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm7325.dtsi b/dts/src/arm64/qcom/pm7325.dtsi
index e7f64a9ddc..d1c5476af5 100644
--- a/dts/src/arm64/qcom/pm7325.dtsi
+++ b/dts/src/arm64/qcom/pm7325.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause
-// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
@@ -18,7 +20,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm7325_gpios: gpios@8800 {
+		pm7325_gpios: gpio@8800 {
 			compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm8005.dtsi b/dts/src/arm64/qcom/pm8005.dtsi
index 50fb6c753b..8d4b081b4e 100644
--- a/dts/src/arm64/qcom/pm8005.dtsi
+++ b/dts/src/arm64/qcom/pm8005.dtsi
@@ -11,7 +11,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8005_gpio: gpios@c000 {
+		pm8005_gpio: gpio@c000 {
 			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm8150b.dtsi b/dts/src/arm64/qcom/pm8150b.dtsi
index cdded791d9..66752cc063 100644
--- a/dts/src/arm64/qcom/pm8150b.dtsi
+++ b/dts/src/arm64/qcom/pm8150b.dtsi
@@ -53,7 +53,7 @@
 			status = "disabled";
 		};
 
-		pm8150b_vbus: dcdc@1100 {
+		pm8150b_vbus: usb-vbus-regulator@1100 {
 			compatible = "qcom,pm8150b-vbus-reg";
 			status = "disabled";
 			reg = <0x1100>;
diff --git a/dts/src/arm64/qcom/pm8450a.dtsi b/dts/src/arm64/qcom/pm8450a.dtsi
new file mode 100644
index 0000000000..34fc728967
--- /dev/null
+++ b/dts/src/arm64/qcom/pm8450a.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8450a: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450a_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450a_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450c: pmic@4 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450c_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450c_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450e: pmic@8 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450e_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450e_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450g: pmic@c {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450g_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450g_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/pm8916.dtsi b/dts/src/arm64/qcom/pm8916.dtsi
index 606c2a6d1f..08f9ca006e 100644
--- a/dts/src/arm64/qcom/pm8916.dtsi
+++ b/dts/src/arm64/qcom/pm8916.dtsi
@@ -107,7 +107,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		pm8916_gpios: gpios@c000 {
+		pm8916_gpios: gpio@c000 {
 			compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm8950.dtsi b/dts/src/arm64/qcom/pm8950.dtsi
new file mode 100644
index 0000000000..07c3896bd3
--- /dev/null
+++ b/dts/src/arm64/qcom/pm8950.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm8950_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8950_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			vcoin@5 {
+				reg = <VADC_VCOIN>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph-pwr@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			die-temp@8 {
+				reg = <VADC_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-625mv@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-1250mv@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-buf-625mv@c {
+				reg = <VADC_SPARE1>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-gnd@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			ref-vdd@f {
+				reg = <VADC_VDD_VADC>;
+			};
+
+			pa-therm1@11 {
+				reg = <VADC_P_MUX2_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			case-therm@13 {
+				reg = <VADC_P_MUX4_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			xo-therm@32 {
+				reg = <VADC_LR_MUX3_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			pa-therm0@36 {
+				reg = <VADC_LR_MUX7_HW_ID>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			xo-therm-buf@3c {
+				reg = <VADC_LR_MUX3_BUF_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pm8950_mpps: mpps@a000 {
+			compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8950_gpio: gpio@c000 {
+			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_gpio 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_spmi_regulators: regulators {
+			compatible = "qcom,pm8950-regulators";
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/pm8994.dtsi b/dts/src/arm64/qcom/pm8994.dtsi
index e92e5ac414..672094c8ca 100644
--- a/dts/src/arm64/qcom/pm8994.dtsi
+++ b/dts/src/arm64/qcom/pm8994.dtsi
@@ -108,7 +108,7 @@
 			};
 		};
 
-		pm8994_gpios: gpios@c000 {
+		pm8994_gpios: gpio@c000 {
 			compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pm8998.dtsi b/dts/src/arm64/qcom/pm8998.dtsi
index d09f2954b6..6a5854333b 100644
--- a/dts/src/arm64/qcom/pm8998.dtsi
+++ b/dts/src/arm64/qcom/pm8998.dtsi
@@ -52,6 +52,14 @@
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm8998_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm8998_temp: temp-alarm@2400 {
@@ -63,7 +71,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm8998_coincell: coincell@2800 {
+		pm8998_coincell: charger@2800 {
 			compatible = "qcom,pm8941-coincell";
 			reg = <0x2800>;
 
@@ -101,7 +109,7 @@
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm8998_gpio: gpios@c000 {
+		pm8998_gpio: gpio@c000 {
 			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pmi8950.dtsi b/dts/src/arm64/qcom/pmi8950.dtsi
new file mode 100644
index 0000000000..32d27e2187
--- /dev/null
+++ b/dts/src/arm64/qcom/pmi8950.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@0 {
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "usbin";
+			};
+
+			adc-chan@1 {
+				reg = <VADC_DCIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "dcin";
+			};
+
+			adc-chan@2 {
+				reg = <VADC_VCHG_SNS>;
+				qcom,pre-scaling = <1 1>;
+				label = "vchg_sns";
+			};
+
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_625mv";
+			};
+
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_1250v";
+			};
+
+			adc-chan@d {
+				reg = <VADC_SPARE2>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pmi8950_mpps: mpps@a000 {
+			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8950_gpio: gpio@c000 {
+			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_gpio 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_wled: leds@d800 {
+			compatible = "qcom,pmi8950-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/pmi8994.dtsi b/dts/src/arm64/qcom/pmi8994.dtsi
index 542c215dde..a0af91698d 100644
--- a/dts/src/arm64/qcom/pmi8994.dtsi
+++ b/dts/src/arm64/qcom/pmi8994.dtsi
@@ -10,7 +10,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8994_gpios: gpios@c000 {
+		pmi8994_gpios: gpio@c000 {
 			compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/dts/src/arm64/qcom/pmi8998.dtsi b/dts/src/arm64/qcom/pmi8998.dtsi
index 3852a012bb..cd1caeae82 100644
--- a/dts/src/arm64/qcom/pmi8998.dtsi
+++ b/dts/src/arm64/qcom/pmi8998.dtsi
@@ -9,7 +9,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8998_gpio: gpios@c000 {
+		pmi8998_gpio: gpio@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -18,6 +18,14 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmi8998_rradc: adc@4500 {
+			compatible = "qcom,pmi8998-rradc";
+			reg = <0x4500>;
+			#io-channel-cells = <1>;
+
+			status = "disabled";
+		};
 	};
 
 	pmi8998_lsid1: pmic@3 {
diff --git a/dts/src/arm64/qcom/pmk8350.dtsi b/dts/src/arm64/qcom/pmk8350.dtsi
index a7ec9d1194..32f5e6af8c 100644
--- a/dts/src/arm64/qcom/pmk8350.dtsi
+++ b/dts/src/arm64/qcom/pmk8350.dtsi
@@ -8,27 +8,33 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/* (Sadly) this PMIC can be configured to be at different SIDs */
+#ifndef PMK8350_SID
+	#define PMK8350_SID 0
+#endif
+
 &spmi_bus {
-	pmk8350: pmic@0 {
+	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
+		reg = <PMK8350_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
 			compatible = "qcom,pm8998-pon";
-			reg = <0x1300>;
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
-				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
 
 			pon_resin: resin {
 				compatible = "qcom,pmk8350-resin";
-				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
 				status = "disabled";
 			};
 		};
@@ -38,14 +44,14 @@
 			reg = <0x3100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#io-channel-cells = <1>;
 		};
 
 		pmk8350_adc_tm: adc-tm@3400 {
 			compatible = "qcom,adc-tm7";
 			reg = <0x3400>;
-			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#thermal-sensor-cells = <1>;
@@ -56,7 +62,7 @@
 			compatible = "qcom,pmk8350-rtc";
 			reg = <0x6100>, <0x6200>;
 			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm64/qcom/pmp8074.dtsi b/dts/src/arm64/qcom/pmp8074.dtsi
new file mode 100644
index 0000000000..ceb2e6358b
--- /dev/null
+++ b/dts/src/arm64/qcom/pmp8074.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmp8074_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			ref-gnd@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vref-1p25@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vref-vadc@2 {
+				reg = <ADC5_VREF_VADC>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmic_die: die-temp@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			xo_therm: xo-temp@76 {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pa_therm1: thermistor1@77 {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pa_therm2: thermistor2@78 {
+				reg = <ADC5_AMUX_THM2_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pa_therm3: thermistor3@79 {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph-pwr@131 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+			};
+		};
+
+		pmp8074_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			allow-set-time;
+			status = "disabled";
+		};
+
+		pmp8074_gpios: gpio@c000 {
+			compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmp8074_gpios 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+
+		regulators {
+			compatible = "qcom,pmp8074-regulators";
+
+			s3: s3 {
+				regulator-name = "vdd_s3";
+				regulator-min-microvolt = <592000>;
+				regulator-max-microvolt = <1064000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			s4: s4 {
+				regulator-name = "vdd_s4";
+				regulator-min-microvolt = <712000>;
+				regulator-max-microvolt = <992000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			l11: l11 {
+				regulator-name = "l11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/pms405.dtsi b/dts/src/arm64/qcom/pms405.dtsi
index 634b0681d0..ffe9e33808 100644
--- a/dts/src/arm64/qcom/pms405.dtsi
+++ b/dts/src/arm64/qcom/pms405.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/input/linux-event-codes.h>
diff --git a/dts/src/arm64/qcom/qcs404-evb-1000.dts b/dts/src/arm64/qcom/qcs404-evb-1000.dts
index 937eb4555f..fc29b194cd 100644
--- a/dts/src/arm64/qcom/qcs404-evb-1000.dts
+++ b/dts/src/arm64/qcom/qcs404-evb-1000.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 /dts-v1/;
 
diff --git a/dts/src/arm64/qcom/qcs404-evb-4000.dts b/dts/src/arm64/qcom/qcs404-evb-4000.dts
index 08d5d51221..59702ba24f 100644
--- a/dts/src/arm64/qcom/qcs404-evb-4000.dts
+++ b/dts/src/arm64/qcom/qcs404-evb-4000.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 /dts-v1/;
 
@@ -37,54 +39,54 @@
 };
 
 &tlmm {
-	ethernet_defaults: ethernet-defaults {
-		int {
+	ethernet_defaults: ethernet-defaults-state {
+		int-pins {
 			pins = "gpio61";
 			function = "rgmii_int";
 			bias-disable;
 			drive-strength = <2>;
 		};
-		mdc {
+		mdc-pins {
 			pins = "gpio76";
 			function = "rgmii_mdc";
 			bias-pull-up;
 		};
-		mdio {
+		mdio-pins {
 			pins = "gpio75";
 			function = "rgmii_mdio";
 			bias-pull-up;
 		};
-		tx {
+		tx-pins {
 			pins = "gpio67", "gpio66", "gpio65", "gpio64";
 			function = "rgmii_tx";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
-		rx {
+		rx-pins {
 			pins = "gpio73", "gpio72", "gpio71", "gpio70";
 			function = "rgmii_rx";
 			bias-disable;
 			drive-strength = <2>;
 		};
-		tx-ctl {
+		tx-ctl-pins {
 			pins = "gpio68";
 			function = "rgmii_ctl";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
-		rx-ctl {
+		rx-ctl-pins {
 			pins = "gpio74";
 			function = "rgmii_ctl";
 			bias-disable;
 			drive-strength = <2>;
 		};
-		tx-ck {
+		tx-ck-pins {
 			pins = "gpio63";
 			function = "rgmii_ck";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
-		rx-ck {
+		rx-ck-pins {
 			pins = "gpio69";
 			function = "rgmii_ck";
 			bias-disable;
diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi
index 1678ef0f86..04c82d1624 100644
--- a/dts/src/arm64/qcom/qcs404-evb.dtsi
+++ b/dts/src/arm64/qcom/qcs404-evb.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 #include <dt-bindings/gpio/gpio.h>
 #include "qcs404.dtsi"
@@ -125,7 +127,7 @@
 };
 
 &rpm_requests {
-	pms405-regulators {
+	regulators {
 		compatible = "qcom,rpm-pms405-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -229,7 +231,7 @@
 };
 
 &tlmm {
-	perst_state: perst {
+	perst_state: perst-state {
 		pins = "gpio43";
 		function = "gpio";
 
@@ -238,68 +240,63 @@
 		output-low;
 	};
 
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc1_off: sdc1-off {
-		clk {
+	sdc1_off: sdc1-off-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	usb3_id_pin: usb3-id-pin {
-		pinmux {
-			pins = "gpio116";
-			function = "gpio";
-		};
+	usb3_id_pin: usb3-id-state {
+		pins = "gpio116";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio116";
-			drive-strength = <2>;
-			bias-pull-up;
-			input-enable;
-		};
+		drive-strength = <2>;
+		bias-pull-up;
+		input-enable;
 	};
 };
 
@@ -366,31 +363,28 @@
 /* PINCTRL - additions to nodes defined in qcs404.dtsi */
 
 &blsp1_uart2_default {
-	rx {
+	rx-pins {
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	tx {
+	tx-pins {
 		drive-strength = <2>;
 		bias-disable;
 	};
 };
 
 &blsp1_uart3_default {
-	cts {
-		pins = "gpio84";
+	cts-pins {
 		bias-disable;
 	};
 
-	rts-tx {
-		pins = "gpio85", "gpio82";
+	rts-tx-pins {
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	rx {
-		pins = "gpio83";
+	rx-pins {
 		bias-pull-up;
 	};
 };
diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi
index 80f2d05595..a5324eecb5 100644
--- a/dts/src/arm64/qcom/qcs404.dtsi
+++ b/dts/src/arm64/qcom/qcs404.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-qcs404.h>
@@ -593,118 +595,130 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_i2c0_default: blsp1-i2c0-default {
+			blsp1_i2c0_default: blsp1-i2c0-default-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c0";
 			};
 
-			blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
 				pins = "gpio24", "gpio25";
 				function = "blsp_i2c1";
 			};
 
-			blsp1_i2c2_default: blsp1-i2c2-default {
-				sda {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				sda-pins {
 					pins = "gpio19";
 					function = "blsp_i2c_sda_a2";
 				};
 
-				scl {
+				scl-pins {
 					pins = "gpio20";
 					function = "blsp_i2c_scl_a2";
 				};
 			};
 
-			blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio84", "gpio85";
 				function = "blsp_i2c3";
 			};
 
-			blsp1_i2c4_default: blsp1-i2c4-default {
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
 				pins = "gpio117", "gpio118";
 				function = "blsp_i2c4";
 			};
 
-			blsp1_uart0_default: blsp1-uart0-default {
+			blsp1_uart0_default: blsp1-uart0-default-state {
 				pins = "gpio30", "gpio31", "gpio32", "gpio33";
 				function = "blsp_uart0";
 			};
 
-			blsp1_uart1_default: blsp1-uart1-default {
+			blsp1_uart1_default: blsp1-uart1-default-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_uart1";
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
-				rx {
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
 					pins = "gpio18";
 					function = "blsp_uart_rx_a2";
 				};
 
-				tx {
+				tx-pins {
 					pins = "gpio17";
 					function = "blsp_uart_tx_a2";
 				};
 			};
 
-			blsp1_uart3_default: blsp1-uart3-default {
-				pins = "gpio82", "gpio83", "gpio84", "gpio85";
-				function = "blsp_uart3";
+			blsp1_uart3_default: blsp1-uart3-default-state {
+				cts-pins {
+					pins = "gpio84";
+					function = "blsp_uart3";
+				};
+
+				rts-tx-pins {
+					pins = "gpio85", "gpio82";
+					function = "blsp_uart3";
+				};
+
+				rx-pins {
+					pins = "gpio83";
+					function = "blsp_uart3";
+				};
 			};
 
-			blsp2_i2c0_default: blsp2-i2c0-default {
+			blsp2_i2c0_default: blsp2-i2c0-default-state {
 				pins = "gpio28", "gpio29";
 				function = "blsp_i2c5";
 			};
 
-			blsp1_spi0_default: blsp1-spi0-default {
+			blsp1_spi0_default: blsp1-spi0-default-state {
 				pins = "gpio30", "gpio31", "gpio32", "gpio33";
 				function = "blsp_spi0";
 			};
 
-			blsp1_spi1_default: blsp1-spi1-default {
-				mosi {
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				mosi-pins {
 					pins = "gpio22";
 					function = "blsp_spi_mosi_a1";
 				};
 
-				miso {
+				miso-pins {
 					pins = "gpio23";
 					function = "blsp_spi_miso_a1";
 				};
 
-				cs_n {
+				cs-n-pins {
 					pins = "gpio24";
 					function = "blsp_spi_cs_n_a1";
 				};
 
-				clk {
+				clk-pins {
 					pins = "gpio25";
 					function = "blsp_spi_clk_a1";
 				};
 			};
 
-			blsp1_spi2_default: blsp1-spi2-default {
+			blsp1_spi2_default: blsp1-spi2-default-state {
 				pins = "gpio17", "gpio18", "gpio19", "gpio20";
 				function = "blsp_spi2";
 			};
 
-			blsp1_spi3_default: blsp1-spi3-default {
+			blsp1_spi3_default: blsp1-spi3-default-state {
 				pins = "gpio82", "gpio83", "gpio84", "gpio85";
 				function = "blsp_spi3";
 			};
 
-			blsp1_spi4_default: blsp1-spi4-default {
+			blsp1_spi4_default: blsp1-spi4-default-state {
 				pins = "gpio37", "gpio38", "gpio117", "gpio118";
 				function = "blsp_spi4";
 			};
 
-			blsp2_spi0_default: blsp2-spi0-default {
+			blsp2_spi0_default: blsp2-spi0-default-state {
 				pins = "gpio26", "gpio27", "gpio28", "gpio29";
 				function = "blsp_spi5";
 			};
 
-			blsp2_uart0_default: blsp2-uart0-default {
+			blsp2_uart0_default: blsp2-uart0-default-state {
 				pins = "gpio26", "gpio27", "gpio28", "gpio29";
 				function = "blsp_uart5";
 			};
diff --git a/dts/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts b/dts/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts
new file mode 100644
index 0000000000..bb149e5779
--- /dev/null
+++ b/dts/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qrb5165-rb5.dts"
+
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+
+	ports {
+		/* The port index denotes CSIPHY id i.e. csiphy2 */
+		port@2 {
+			csiphy2_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply  = <&vreg_l7f_1p8>;
+		avdd-supply = <&vdc_5v>;
+		dvdd-supply = <&vdc_5v>;
+
+		port {
+			imx577_ep: endpoint {
+				clock-lanes = <1>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy2_ep>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/qrb5165-rb5.dts b/dts/src/arm64/qcom/qrb5165-rb5.dts
index bf8077a1cf..8c64cb060e 100644
--- a/dts/src/arm64/qcom/qrb5165-rb5.dts
+++ b/dts/src/arm64/qcom/qrb5165-rb5.dts
@@ -867,7 +867,7 @@
 };
 
 &q6afedai {
-	qi2s@16 {
+	dai@16 {
 		reg = <PRIMARY_MI2S_RX>;
 		qcom,sd-lines = <0 1 2 3>;
 	};
@@ -875,7 +875,7 @@
 
 /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
 &q6afedai {
-	qi2s@20 {
+	dai@20 {
 		reg = <TERTIARY_MI2S_RX>;
 		qcom,sd-lines = <0>;
 	};
@@ -904,7 +904,7 @@
 	cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &sound {
@@ -1007,7 +1007,7 @@
 };
 
 &swr0 {
-	left_spkr: wsa8810-left{
+	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
 		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
@@ -1016,7 +1016,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	right_spkr: wsa8810-right{
+	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
 		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
@@ -1210,33 +1210,33 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
-	lt9611_irq_pin: lt9611-irq {
+	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
 		bias-disable;
 	};
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-pull-up;
diff --git a/dts/src/arm64/qcom/sa8155p-adp.dts b/dts/src/arm64/qcom/sa8155p-adp.dts
index 4dee790f10..f41dcc379d 100644
--- a/dts/src/arm64/qcom/sa8155p-adp.dts
+++ b/dts/src/arm64/qcom/sa8155p-adp.dts
@@ -136,9 +136,8 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a_1p8: ldo7 {
@@ -154,9 +153,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a_0p8: ldo11 {
@@ -263,9 +261,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_1p8: ldo7 {
@@ -281,9 +278,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
@@ -397,7 +393,7 @@
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &uart2 {
@@ -488,26 +484,26 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>;
 
-	sdc2_on: sdc2_on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;		/* No pull */
 			drive-strength = <16>;	/* 16 MA */
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
 
-		sd-cd {
+		sd-cd-pins {
 			pins = "gpio96";
 			function = "gpio";
 			bias-pull-up;		/* pull up */
@@ -515,26 +511,26 @@
 		};
 	};
 
-	sdc2_off: sdc2_off {
-		clk {
+	sdc2_off: sdc2-off-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;		/* No pull */
 			drive-strength = <2>;	/* 2 MA */
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
 
-		sd-cd {
+		sd-cd-pins {
 			pins = "gpio96";
 			function = "gpio";
 			bias-pull-up;		/* pull up */
@@ -542,66 +538,62 @@
 		};
 	};
 
-	usb2phy_ac_en1_default: usb2phy_ac_en1_default {
-		mux {
-			pins = "gpio113";
-			function = "usb2phy_ac";
-			bias-disable;
-			drive-strength = <2>;
-		};
+	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
+		pins = "gpio113";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	usb2phy_ac_en2_default: usb2phy_ac_en2_default {
-		mux {
-			pins = "gpio123";
-			function = "usb2phy_ac";
-			bias-disable;
-			drive-strength = <2>;
-		};
+	usb2phy_ac_en2_default: usb2phy-ac-en2-default-state {
+		pins = "gpio123";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	ethernet_defaults: ethernet-defaults {
-		mdc {
+	ethernet_defaults: ethernet-defaults-state {
+		mdc-pins {
 			pins = "gpio7";
 			function = "rgmii";
 			bias-pull-up;
 		};
 
-		mdio {
+		mdio-pins {
 			pins = "gpio59";
 			function = "rgmii";
 			bias-pull-up;
 		};
 
-		rgmii-rx {
+		rgmii-rx-pins {
 			pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116";
 			function = "rgmii";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		rgmii-tx {
+		rgmii-tx-pins {
 			pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121";
 			function = "rgmii";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
 
-		phy-intr {
+		phy-intr-pins {
 			pins = "gpio124";
 			function = "emac_phy";
 			bias-disable;
 			drive-strength = <8>;
 		};
 
-		pps {
+		pps-pins {
 			pins = "gpio81";
 			function = "emac_pps";
 			bias-disable;
 			drive-strength = <8>;
 		};
 
-		phy-reset {
+		phy-reset-pins {
 			pins = "gpio79";
 			function = "gpio";
 			bias-pull-up;
diff --git a/dts/src/arm64/qcom/sa8295p-adp.dts b/dts/src/arm64/qcom/sa8295p-adp.dts
index 2c62ba6a49..84cb6f3eeb 100644
--- a/dts/src/arm64/qcom/sa8295p-adp.dts
+++ b/dts/src/arm64/qcom/sa8295p-adp.dts
@@ -57,6 +57,13 @@
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	pmm8540-c-regulators {
@@ -83,9 +90,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c: ldo4 {
@@ -101,9 +107,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c: ldo7 {
@@ -119,9 +124,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l17c: ldo17 {
@@ -130,9 +134,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
@@ -163,6 +166,76 @@
 	};
 };
 
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	num-lanes = <2>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3b {
+	perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3b_default>;
+
+	status = "okay";
+};
+
+&pcie3b_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
 &qup2 {
 	status = "okay";
 };
@@ -194,6 +267,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			wakeup-source;
+		};
+
 		pm8450a_gpios: gpio@c000 {
 			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
@@ -392,3 +473,97 @@
 };
 
 /* PINCTRL */
+
+&tlmm {
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3b_default: pcie3b-default-state {
+		clkreq-n-pins {
+			pins = "gpio152";
+			function = "pcie3b_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio153";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio130";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/sa8540p-ride.dts b/dts/src/arm64/qcom/sa8540p-ride.dts
new file mode 100644
index 0000000000..6c547f1b13
--- /dev/null
+++ b/dts/src/arm64/qcom/sa8540p-ride.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8540p.dtsi"
+#include "pm8450a.dtsi"
+
+/ {
+	model = "Qualcomm SA8540P Ride";
+	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
+
+	aliases {
+		serial0 = &qup2_uart17;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17c: ldo17 {
+			regulator-name = "vreg_l17c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_l3g: ldo3 {
+			regulator-name = "vreg_l3g";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7g: ldo7 {
+			regulator-name = "vreg_l7g";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8g: ldo8 {
+			regulator-name = "vreg_l8g";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pcie3a {
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>,
+		 <0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&qup2_uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp1 {
+	firmware-name = "qcom/sa8540p/cdsp1.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	pcie3a_default: pcie3a-default-state {
+		perst-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vccq-supply = <&vreg_l6c>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/dts/src/arm64/qcom/sa8540p.dtsi b/dts/src/arm64/qcom/sa8540p.dtsi
index 8ea2886fba..a88452c20d 100644
--- a/dts/src/arm64/qcom/sa8540p.dtsi
+++ b/dts/src/arm64/qcom/sa8540p.dtsi
@@ -14,59 +14,81 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
 		};
 		opp-499200000 {
 			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
 		};
 		opp-595200000 {
 			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
 		};
 		opp-710400000 {
 			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <(672000 * 32)>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
 		};
 		opp-902400000 {
 			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1017600000 {
 			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
 		};
 		opp-1209600000 {
 			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1286400 * 32)>;
 		};
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1382400 * 32)>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
 		};
 		opp-1670400000 {
 			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1593600 * 32)>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-1881600000 {
 			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2016000000 {
 			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2131200000 {
 			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2246400000 {
 			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 	};
 
@@ -76,58 +98,134 @@
 
 		opp-825600000 {
 			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(300000 * 32)>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1171200000 {
 			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1286400000 {
 			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1286400 * 32)>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1382400 * 32)>;
 		};
 		opp-1516800000 {
 			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1593600 * 32)>;
 		};
 		opp-1747200000 {
 			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1593600 * 32)>;
 		};
 		opp-1862400000 {
 			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-1977600000 {
 			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2169600000 {
 			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2284800000 {
 			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2380800000 {
 			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2496000000 {
 			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2592000000 {
 			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 	};
 };
 
+&pcie2a {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <0>;
+
+	interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie2b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <1>;
+
+	interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie3a {
+	compatible = "qcom,pcie-sa8540p";
+	reg = <0x0 0x01c10000 0x0 0x3000>,
+	      <0x0 0x40000000 0x0 0xf1d>,
+	      <0x0 0x40000f20 0x0 0xa8>,
+	      <0x0 0x40001000 0x0 0x1000>,
+	      <0x0 0x40100000 0x0 0x100000>;
+	reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1d00000>;
+
+	linux,pci-domain = <2>;
+
+	interrupts =  <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+
+	interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie3b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <3>;
+
+	interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie4 {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <4>;
+
+	interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
 &rpmhpd {
 	compatible = "qcom,sa8540p-rpmhpd";
 };
diff --git a/dts/src/arm64/qcom/sc7180-idp.dts b/dts/src/arm64/qcom/sc7180-idp.dts
index 9dee131b1e..70fd9ff8df 100644
--- a/dts/src/arm64/qcom/sc7180-idp.dts
+++ b/dts/src/arm64/qcom/sc7180-idp.dts
@@ -481,287 +481,261 @@
 };
 
 &qspi_clk {
-	pinconf {
-		pins = "gpio63";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &qspi_cs0 {
-	pinconf {
-		pins = "gpio68";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &qspi_data01 {
-	pinconf {
-		pins = "gpio64", "gpio65";
-
-		/* High-Z when no transfers; nice to park the lines */
-		bias-pull-up;
-	};
+	/* High-Z when no transfers; nice to park the lines */
+	bias-pull-up;
 };
 
 &qup_i2c2_default {
-	pinconf {
-		pins = "gpio15", "gpio16";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c4_default {
-	pinconf {
-		pins = "gpio115", "gpio116";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c7_default {
-	pinconf {
-		pins = "gpio6", "gpio7";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c9_default {
-	pinconf {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
-&qup_uart3_default {
-	pinconf-cts {
-		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
-		 */
-		pins = "gpio38";
-		bias-pull-down;
-	};
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
 
-	pinconf-rts {
-		/* We'll drive RTS, so no pull */
-		pins = "gpio39";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-tx {
-		/* We'll drive TX, so no pull */
-		pins = "gpio40";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-rx {
-		/*
-		 * Configure a pull-up on RX. This is needed to avoid
-		 * garbage data when the TX pin of the Bluetooth module is
-		 * in tri-state (module powered off or not driving the
-		 * signal yet).
-		 */
-		pins = "gpio41";
-		bias-pull-up;
-	};
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
 };
 
-&qup_uart8_default {
-	pinconf-tx {
-		pins = "gpio44";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-rx {
-		pins = "gpio45";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
 };
 
-&qup_spi0_default {
-	pinconf {
-		pins = "gpio34", "gpio35", "gpio36", "gpio37";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_spi6_default {
-	pinconf {
-		pins = "gpio59", "gpio60", "gpio61", "gpio62";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_spi0_cs {
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_spi10_default {
-	pinconf {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&tlmm {
-	qup_uart3_sleep: qup-uart3-sleep {
-		pinmux {
-			pins = "gpio38", "gpio39",
-			       "gpio40", "gpio41";
-			function = "gpio";
-		};
+&qup_spi6_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
 
-		pinconf-cts {
+&tlmm {
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
 			/*
 			 * Configure a pull-down on CTS to match the pull of
 			 * the Bluetooth module.
 			 */
 			pins = "gpio38";
+			function = "gpio";
 			bias-pull-down;
 		};
 
-		pinconf-rts {
+		rts-pins {
 			/*
 			 * Configure pull-down on RTS. As RTS is active low
 			 * signal, pull it low to indicate the BT SoC that it
 			 * can wakeup the system anytime from suspend state by
 			 * pulling RX low (by sending wakeup bytes).
 			 */
-			 pins = "gpio39";
-			 bias-pull-down;
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
 		};
 
-		pinconf-tx {
+		tx-pins {
 			/*
 			 * Configure pull-up on TX when it isn't actively driven
 			 * to prevent BT SoC from receiving garbage during sleep.
 			 */
 			pins = "gpio40";
+			function = "gpio";
 			bias-pull-up;
 		};
 
-		pinconf-rx {
+		rx-pins {
 			/*
 			 * Configure a pull-up on RX. This is needed to avoid
 			 * garbage data when the TX pin of the Bluetooth module
 			 * is floating which may cause spurious wakeups.
 			 */
 			pins = "gpio41";
+			function = "gpio";
 			bias-pull-up;
 		};
 	};
 
-	sdc1_on: sdc1-on {
-		pinconf-clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc1_off: sdc1-off {
-		pinconf-clk {
+	sdc1_off: sdc1-off-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		pinconf-clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
 
-	sdc2_off: sdc2-off {
-		pinconf-clk {
+	sdc2_off: sdc2-off-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi
index 7ee407f7b6..8b8ea8af16 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi
@@ -181,23 +181,15 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &en_pp3300_dx_edp {
-	pinmux  {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 &ts_reset_l {
-	pinconf {
-		/*
-		 * We want reset state by default and it will be up to the
-		 * driver to disable this when it's ready.
-		 */
-		output-low;
-	};
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -327,16 +319,10 @@ ap_ts_pen_1v8: &i2c4 {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	dmic_clk_en: dmic_clk_en {
-		pinmux {
-			pins = "gpio83";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio83";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
+	dmic_clk_en: dmic-clk-en-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
index 1bd6c7dcd9..d3cf64c16d 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
@@ -10,22 +10,22 @@
 / {
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
 
-	max98360a_1: max98360a_1 {
+	max98360a_1: amplifier-1 {
 		compatible = "maxim,max98360a";
 		#sound-dai-cells = <0>;
 	};
 
-	max98360a_2: max98360a_2 {
+	max98360a_2: amplifier-2 {
 		compatible = "maxim,max98360a";
 		#sound-dai-cells = <0>;
 	};
 
-	max98360a_3: max98360a_3 {
+	max98360a_3: amplifier-3 {
 		compatible = "maxim,max98360a";
 		#sound-dai-cells = <0>;
 	};
 
-	pp3300_touch: pp3300-touch {
+	pp3300_touch: pp3300-touch-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_touch";
 
@@ -180,30 +180,19 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
-&sec_mi2s_active{
-	pinmux {
-		pins = "gpio49", "gpio50", "gpio51", "gpio52";
-		function = "mi2s_1";
-	};
+&sec_mi2s_active {
+	pins = "gpio49", "gpio50", "gpio51", "gpio52";
 };
 
 &ts_reset_l {
-	pinconf {
-		/*
-		 * We want reset state by default and it will be up to the
-		 * driver to disable this when it's ready.
-		 */
-		output-low;
-	};
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -333,16 +322,10 @@ ap_ts_pen_1v8: &i2c4 {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	en_pp3300_touch: en-pp3300-touch {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_touch: en-pp3300-touch-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r0.dts b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r0.dts
index 1a62e8d435..3abd6222fe 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r0.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r0.dts
@@ -29,16 +29,10 @@
 };
 
 &tlmm {
-	en_fp_rails: en-fp-rails {
-		pinmux {
-			pins = "gpio74";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio74";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_fp_rails: en-fp-rails-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-kingoftown.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown.dtsi
index 74f0e07ea5..315ac5eb5f 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-kingoftown.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown.dtsi
@@ -11,6 +11,7 @@
 
 &alc5682 {
 	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
 	realtek,dmic1-clk-pin = <2>;
 	realtek,dmic-clk-rate-hz = <2048000>;
 };
@@ -87,13 +88,7 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
index 002663d752..269007d731 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
@@ -75,21 +75,13 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &trackpad_int_1v8_odl {
-	pinmux {
-		pins = "gpio58";
-	};
-
-	pinconf {
-		pins = "gpio58";
-	};
+	pins = "gpio58";
 };
 
 &ts_reset_l {
-	pinconf {
-		/* This pin is not connected on -rev0, pull up to park. */
-		/delete-property/bias-disable;
-		bias-pull-up;
-	};
+	/* This pin is not connected on -rev0, pull up to park. */
+	/delete-property/bias-disable;
+	bias-pull-up;
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0.dtsi
index 7bc8402c01..f4c1f38136 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0.dtsi
@@ -24,30 +24,13 @@
 
 /* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */
 &avdd_lcd_en {
-	pinmux {
-		pins = "gpio80";
-	};
-
-	pinconf {
-		pins = "gpio80";
-	};
+	pins = "gpio80";
 };
 
 &mipi_1800_en {
-	pinmux {
-		pins = "gpio81";
-	};
-
-	pinconf {
-		pins = "gpio81";
-	};
+	pins = "gpio81";
 };
-&vdd_reset_1800 {
-	pinmux {
-		pins = "gpio76";
-	};
 
-	pinconf {
-		pins = "gpio76";
-	};
+&vdd_reset_1800 {
+	pins = "gpio76";
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-mrbland.dtsi
index 97cba7f806..ed12ee35f0 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-mrbland.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland.dtsi
@@ -13,7 +13,7 @@
 /delete-node/ &usb_c1;
 
 / {
-	avdd_lcd: avdd-lcd {
+	avdd_lcd: avdd-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_lcd";
 
@@ -25,7 +25,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	avee_lcd: avee-lcd {
+	avee_lcd: avee-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avee_lcd";
 
@@ -37,7 +37,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	v1p8_mipi: v1p8-mipi {
+	v1p8_mipi: v1p8-mipi-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "v1p8_mipi";
 
@@ -160,13 +160,7 @@ pp3300_disp_on: &pp3300_dx_edp {
  */
 
 tp_en: &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio85";
-	};
-
-	pinconf {
-		pins = "gpio85";
-	};
+	pins = "gpio85";
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -296,55 +290,31 @@ tp_en: &en_pp3300_dx_edp {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	avdd_lcd_en: avdd-lcd-en {
-		pinmux {
-			pins = "gpio88";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio88";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avdd_lcd_en: avdd-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	avee_lcd_en: avee-lcd-en {
-		pinmux {
-			pins = "gpio21";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio21";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avee_lcd_en: avee-lcd-en-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	mipi_1800_en: mipi-1800-en {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	mipi_1800_en: mipi-1800-en-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	vdd_reset_1800: vdd-reset-1800 {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	vdd_reset_1800: vdd-reset-1800-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi
index 6a84fba178..ebd6765e2a 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	pp3300_brij_ps8640: pp3300-brij-ps8640 {
+	pp3300_brij_ps8640: pp3300-brij-ps8640-regulator {
 		compatible = "regulator-fixed";
 		status = "okay";
 		regulator-name = "pp3300_brij_ps8640";
@@ -83,29 +83,17 @@ edp_brij_i2c: &i2c2 {
 };
 
 &tlmm {
-	edp_brij_ps8640_rst: edp-brij-ps8640-rst {
-		pinmux {
-			pins = "gpio11";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio11";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	edp_brij_ps8640_rst: edp-brij-ps8640-rst-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 {
-		pinmux {
-			pins = "gpio32";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi
index 56d787785f..d06cc4ea33 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi
@@ -84,13 +84,7 @@
 };
 
 &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel360-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-pazquel360-lte.dts
new file mode 100644
index 0000000000..021bcafcf8
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel360-lte.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,LTE)";
+	compatible = "google,pazquel-sku22", "google,pazquel-sku20", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel360-wifi.dts b/dts/src/arm64/qcom/sc7180-trogdor-pazquel360-wifi.dts
new file mode 100644
index 0000000000..defd84c535
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel360-wifi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,WIFI-only)";
+	compatible = "google,pazquel-sku21", "qcom,sc7180";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel360.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pazquel360.dtsi
new file mode 100644
index 0000000000..5702325d0c
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include "sc7180-trogdor-pazquel.dtsi"
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+		MATRIX_KEY(0x03, 0x09, 0)       /* T11 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		MATRIX_KEY(0x03, 0x09, KEY_SLEEP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
index a7582fb547..6c5287bd27 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
@@ -312,15 +312,9 @@ ap_ts_pen_1v8: &i2c4 {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	dmic_sel: dmic-sel {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			bias-pull-down;
-		};
+	dmic_sel: dmic-sel-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi
index 695b04fe72..cb41ccdacc 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -13,7 +13,7 @@
 /delete-node/ &usb_c1;
 
 / {
-	ppvar_lcd: ppvar-lcd {
+	ppvar_lcd: ppvar-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ppvar_lcd";
 
@@ -25,7 +25,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	v1p8_disp: v1p8-disp {
+	v1p8_disp: v1p8-disp-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "v1p8_disp";
 
@@ -147,13 +147,7 @@ pp3300_disp_on: &pp3300_dx_edp {
  */
 
 tp_en: &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -283,42 +277,24 @@ tp_en: &en_pp3300_dx_edp {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	lcd_rst: lcd-rst {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	lcd_rst: lcd-rst-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	ppvar_lcd_en: ppvar-lcd-en {
-		pinmux {
-			pins = "gpio88";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio88";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	ppvar_lcd_en: ppvar-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	pp1800_disp_on: pp1800-disp-on {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pp1800_disp_on: pp1800-disp-on-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts
index bc097d1b1b..671b3691f1 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts
@@ -63,13 +63,7 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &trackpad_int_1v8_odl {
-	pinmux {
-		pins = "gpio58";
-	};
-
-	pinconf {
-		pins = "gpio58";
-	};
+	pins = "gpio58";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
index f869e6a343..65333709e5 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -76,16 +76,10 @@ edp_brij_i2c: &i2c2 {
 };
 
 &tlmm {
-	edp_brij_irq: edp-brij-irq {
-		pinmux {
-			pins = "gpio11";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio11";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	edp_brij_irq: edp-brij-irq-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
index db29e0cba2..7f272c6e95 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
@@ -24,30 +24,13 @@
 
 /* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */
 &avdd_lcd_en {
-	pinmux {
-		pins = "gpio80";
-	};
-
-	pinconf {
-		pins = "gpio80";
-	};
+	pins = "gpio80";
 };
 
 &mipi_1800_en {
-	pinmux {
-		pins = "gpio81";
-	};
-
-	pinconf {
-		pins = "gpio81";
-	};
+	pins = "gpio81";
 };
-&vdd_reset_1800 {
-	pinmux {
-		pins = "gpio76";
-	};
 
-	pinconf {
-		pins = "gpio76";
-	};
+&vdd_reset_1800 {
+	pins = "gpio76";
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
index aa605885c3..6225ab8329 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
@@ -19,6 +19,7 @@
 
 &alc5682 {
 	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
 	realtek,dmic1-clk-pin = <2>;
 	realtek,dmic-clk-rate-hz = <2048000>;
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
index 7116c44c8d..b40b068dad 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
@@ -19,6 +19,7 @@
 
 &alc5682 {
 	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
 	realtek,dmic1-clk-pin = <2>;
 	realtek,dmic-clk-rate-hz = <2048000>;
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi
index 6312108e8b..9832e752da 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -10,7 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 
 / {
-	avdd_lcd: avdd-lcd {
+	avdd_lcd: avdd-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_lcd";
 
@@ -22,7 +22,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	avee_lcd: avee-lcd {
+	avee_lcd: avee-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avee_lcd";
 
@@ -35,7 +35,7 @@
 	};
 
 	pp1800_ts:
-	v1p8_mipi: v1p8-mipi {
+	v1p8_mipi: v1p8-mipi-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "v1p8_mipi";
 
@@ -222,13 +222,7 @@ pp3300_disp_on: &pp3300_dx_edp {
  */
 
 tp_en: &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio85";
-	};
-
-	pinconf {
-		pins = "gpio85";
-	};
+	pins = "gpio85";
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -358,55 +352,31 @@ tp_en: &en_pp3300_dx_edp {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	avdd_lcd_en: avdd-lcd-en {
-		pinmux {
-			pins = "gpio88";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio88";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avdd_lcd_en: avdd-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	avee_lcd_en: avee-lcd-en {
-		pinmux {
-			pins = "gpio21";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio21";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avee_lcd_en: avee-lcd-en-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	mipi_1800_en: mipi-1800-en {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	mipi_1800_en: mipi-1800-en-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	vdd_reset_1800: vdd-reset-1800 {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	vdd_reset_1800: vdd-reset-1800-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi
index eae22e6e97..f1defb94d6 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi
@@ -354,7 +354,7 @@
 
 	pwmleds {
 		compatible = "pwm-leds";
-		keyboard_backlight: keyboard-backlight {
+		keyboard_backlight: led-0 {
 			status = "disabled";
 			label = "cros_ec::kbd_backlight";
 			function = LED_FUNCTION_KBD_BACKLIGHT;
@@ -768,6 +768,8 @@ hp_i2c: &i2c9 {
 		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
 
 		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
 		MICVDD-supply = <&pp3300_codec>;
 		VBAT-supply = <&pp3300_audio>;
 
@@ -880,27 +882,30 @@ hp_i2c: &i2c9 {
 };
 
 &spi0 {
-	pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
+	pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs_gpio>;
 	cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 };
 
 &spi6 {
-	pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
+	pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs_gpio>;
 	cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 };
 
 ap_spi_fp: &spi10 {
-	pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+	pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs_gpio>;
 	cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
 
 	cros_ec_fp: ec@0 {
-		compatible = "google,cros-ec-spi";
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
 		reg = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&fp_to_ap_irq_l>;
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
 		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_tp>;
 	};
 };
 
@@ -997,175 +1002,141 @@ ap_spi_fp: &spi10 {
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &dp_hot_plug_det {
-	pinconf {
-		pins = "gpio117";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &pri_mi2s_active {
-	pinconf {
-		pins = "gpio53", "gpio54", "gpio55", "gpio56";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
+	drive-strength = <2>;
+	bias-pull-down;
 };
 
 &pri_mi2s_mclk_active {
-	pinconf {
-		pins = "gpio57";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
+	drive-strength = <2>;
+	bias-pull-down;
 };
 
 &qspi_cs0 {
-	pinconf {
-		pins = "gpio68";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &qspi_clk {
-	pinconf {
-		pins = "gpio63";
-		drive-strength = <8>;
-		bias-disable;
-	};
+	drive-strength = <8>;
+	bias-disable;
 };
 
 &qspi_data01 {
-	pinconf {
-		pins = "gpio64", "gpio65";
-
-		/* High-Z when no transfers; nice to park the lines */
-		bias-pull-up;
-	};
+	/* High-Z when no transfers; nice to park the lines */
+	bias-pull-up;
 };
 
 &qup_i2c2_default {
-	pinconf {
-		pins = "gpio15", "gpio16";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c4_default {
-	pinconf {
-		pins = "gpio115", "gpio116";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c5_default {
-	pinconf {
-		pins = "gpio25", "gpio26";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c7_default {
-	pinconf {
-		pins = "gpio6", "gpio7";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c9_default {
-	pinconf {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
 &qup_spi0_cs_gpio {
-	pinconf {
-		pins = "gpio34", "gpio35", "gpio36", "gpio37";
-		drive-strength = <2>;
-		bias-disable;
-	};
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
 &qup_spi6_cs_gpio {
-	pinconf {
-		pins = "gpio59", "gpio60", "gpio61", "gpio62";
-		drive-strength = <2>;
-		bias-disable;
-	};
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
 &qup_spi10_cs_gpio {
-	pinconf {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		drive-strength = <2>;
-		bias-disable;
-	};
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_uart3_default {
-	pinconf-cts {
-		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
-		 */
-		pins = "gpio38";
-		bias-pull-down;
-	};
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
 
-	pinconf-rts-tx {
-		/* We'll drive RTS and TX, so no pull */
-		pins = "gpio39", "gpio40";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-rx {
-		/*
-		 * Configure a pull-up on RX. This is needed to avoid
-		 * garbage data when the TX pin of the Bluetooth module is
-		 * in tri-state (module powered off or not driving the
-		 * signal yet).
-		 */
-		pins = "gpio41";
-		bias-pull-up;
-	};
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_uart8_default {
-	pinconf-tx {
-		pins = "gpio44";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
 
-	pinconf-rx {
-		pins = "gpio45";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
 };
 
 &sec_mi2s_active {
-	pinconf {
-		pins = "gpio49", "gpio50", "gpio51";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
+	drive-strength = <2>;
+	bias-pull-down;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -1196,468 +1167,337 @@ ap_spi_fp: &spi10 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
 
-	amp_en: amp-en {
-		pinmux {
-			pins = "gpio23";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio23";
-			bias-pull-down;
-		};
+	amp_en: amp-en-state {
+		pins = "gpio23";
+		function = "gpio";
+		bias-pull-down;
 	};
 
-	ap_ec_int_l: ap-ec-int-l {
-		pinmux {
-			pins = "gpio94";
-			function = "gpio";
-			input-enable;
-		};
-
-		pinconf {
-			pins = "gpio94";
-			bias-pull-up;
-		};
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio94";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
 	};
 
-	ap_edp_bklten: ap-edp-bklten {
-		pinmux {
-			pins = "gpio12";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
+	ap_edp_bklten: ap-edp-bklten-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 
-			/* Force backlight to be disabled to match state at boot. */
-			output-low;
-		};
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
 	};
 
-	ap_suspend_l_neuter: ap-suspend-l-neuter {
-		pinmux  {
-			pins = "gpio27";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio27";
-			bias-disable;
-		};
+	ap_suspend_l_neuter: ap-suspend-l-neuter-state {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
 	};
 
-	bios_flash_wp_l: bios-flash-wp-l {
-		pinmux {
-			pins = "gpio66";
-			function = "gpio";
-			input-enable;
-		};
-
-		pinconf {
-			pins = "gpio66";
-			bias-disable;
-		};
+	bios_flash_wp_l: bios-flash-wp-l-state {
+		pins = "gpio66";
+		function = "gpio";
+		input-enable;
+		bias-disable;
 	};
 
-	edp_brij_en: edp-brij-en {
-		pinmux {
-			pins = "gpio104";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio104";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	edp_brij_en: edp-brij-en-state {
+		pins = "gpio104";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_codec: en-pp3300-codec {
-		pinmux {
-			pins = "gpio83";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio83";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_codec: en-pp3300-codec-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_dx_edp: en-pp3300-dx-edp {
-		pinmux {
-			pins = "gpio30";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio30";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_hub: en-pp3300-hub {
-		pinmux {
-			pins = "gpio84";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio84";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_hub: en-pp3300-hub-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	fp_to_ap_irq_l: fp-to-ap-irq-l {
-		pinmux {
-			pins = "gpio4";
-			function = "gpio";
-			input-enable;
-		};
-
-		pinconf {
-			pins = "gpio4";
-
-			/* Has external pullup */
-			bias-disable;
-		};
+	fp_rst_l: fp-rst-l-state {
+		pins = "gpio22";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	h1_ap_int_odl: h1-ap-int-odl {
-		pinmux {
-			pins = "gpio42";
-			function = "gpio";
-			input-enable;
-		};
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
+		pins = "gpio4";
+		function = "gpio";
+		input-enable;
 
-		pinconf {
-			pins = "gpio42";
-			bias-pull-up;
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	hp_irq: hp-irq {
-		pinmux {
-			pins = "gpio28";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio28";
-			bias-pull-up;
-		};
+	fpmcu_boot0: fpmcu-boot0-state {
+		pins = "gpio10";
+		function = "gpio";
+		bias-disable;
 	};
 
-	pen_irq_l: pen-irq-l {
-		pinmux {
-			pins = "gpio21";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio21";
-
-			/* Has external pullup */
-			bias-disable;
-		};
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio42";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
 	};
 
-	pen_pdct_l: pen-pdct-l {
-		pinmux {
-			pins = "gpio52";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio52";
-
-			/* Has external pullup */
-			bias-disable;
-		};
+	hp_irq: hp-irq-state {
+		pins = "gpio28";
+		function = "gpio";
+		bias-pull-up;
 	};
 
-	pen_rst_odl: pen-rst-odl {
-		pinmux  {
-			pins = "gpio18";
-			function = "gpio";
-		};
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio21";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio18";
-			bias-disable;
-			drive-strength = <2>;
-
-			/*
-			 * The pen driver doesn't currently support
-			 * driving this reset line.  By specifying
-			 * output-high here we're relying on the fact
-			 * that this pin has a default pulldown at boot
-			 * (which makes sure the pen was in reset if it
-			 * was powered) and then we set it high here to
-			 * take it out of reset.  Better would be if the
-			 * pen driver could control this and we could
-			 * remove "output-high" here.
-			 */
-			output-high; /* TODO: Remove this? */
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	p_sensor_int_l: p-sensor-int-l {
-		pinmux {
-			pins = "gpio24";
-			function = "gpio";
-			input-enable;
-		};
+	pen_pdct_l: pen-pdct-l-state-state {
+		pins = "gpio52";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio24";
-			/* Has external pullup */
-			bias-disable;
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
-		pinconf {
-			pins = "gpio37";
-			output-high;
-		};
-	};
+	pen_rst_odl: pen-rst-odl-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
 
-	qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
-		pinconf {
-			pins = "gpio62";
-			output-high;
-		};
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high; /* TODO: Remove this? */
 	};
 
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
-		pinconf {
-			pins = "gpio89";
-			output-high;
-		};
-	};
+	p_sensor_int_l: p-sensor-int-l-state {
+		pins = "gpio24";
+		function = "gpio";
+		input-enable;
 
-	qup_uart3_sleep: qup-uart3-sleep {
-		pinmux {
-			pins = "gpio38", "gpio39",
-			       "gpio40", "gpio41";
-			function = "gpio";
-		};
+		/* Has external pullup */
+		bias-disable;
+	};
 
-		pinconf-cts {
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
 			/*
 			 * Configure a pull-down on CTS to match the pull of
 			 * the Bluetooth module.
 			 */
 			pins = "gpio38";
+			function = "gpio";
 			bias-pull-down;
 		};
 
-		pinconf-rts {
+		rts-pins {
 			/*
 			 * Configure pull-down on RTS. As RTS is active low
 			 * signal, pull it low to indicate the BT SoC that it
 			 * can wakeup the system anytime from suspend state by
 			 * pulling RX low (by sending wakeup bytes).
 			 */
-			 pins = "gpio39";
-			 bias-pull-down;
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
 		};
 
-		pinconf-tx {
+		tx-pins {
 			/*
 			 * Configure pull-up on TX when it isn't actively driven
 			 * to prevent BT SoC from receiving garbage during sleep.
 			 */
 			pins = "gpio40";
+			function = "gpio";
 			bias-pull-up;
 		};
 
-		pinconf-rx {
+		rx-pins {
 			/*
 			 * Configure a pull-up on RX. This is needed to avoid
 			 * garbage data when the TX pin of the Bluetooth module
 			 * is floating which may cause spurious wakeups.
 			 */
 			pins = "gpio41";
+			function = "gpio";
 			bias-pull-up;
 		};
 	};
 
 	/* Named trackpad_int_1v8_odl on earlier revision schematics */
 	trackpad_int_1v8_odl:
-	tp_int_odl: tp-int-odl {
-		pinmux {
-			pins = "gpio0";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio0";
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio0";
+		function = "gpio";
 
-			/* Has external pullup */
-			bias-disable;
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	ts_int_l: ts-int-l {
-		pinmux  {
-			pins = "gpio9";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio9";
-			bias-pull-up;
-		};
+	ts_int_l: ts-int-l-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-pull-up;
 	};
 
-	ts_reset_l: ts-reset-l {
-		pinmux  {
-			pins = "gpio8";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio8";
-			bias-disable;
-			drive-strength = <2>;
-		};
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio8";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	sdc1_on: sdc1-on {
-		pinconf-clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc1_off: sdc1-off {
-		pinconf-clk {
+	sdc1_off: sdc1-off-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		pinconf-clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
 
-	sdc2_off: sdc2-off {
-		pinconf-clk {
+	sdc2_off: sdc2-off-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
 
-	uf_cam_en: uf-cam-en {
-		pinmux {
-			pins = "gpio6";
-			function = "gpio";
-		};
+	uf_cam_en: uf-cam-en-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
 
-		pinconf {
-			pins = "gpio6";
-			drive-strength = <2>;
-			/* External pull down */
-			bias-disable;
-		};
+		/* External pull down */
+		bias-disable;
 	};
 
-	wf_cam_en: wf-cam-en {
-		pinmux {
-			pins = "gpio7";
-			function = "gpio";
-		};
+	wf_cam_en: wf-cam-en-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
 
-		pinconf {
-			pins = "gpio7";
-			drive-strength = <2>;
-			/* External pull down */
-			bias-disable;
-		};
+		/* External pull down */
+		bias-disable;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi
index 58976a1ba0..f71cf21a8d 100644
--- a/dts/src/arm64/qcom/sc7180.dtsi
+++ b/dts/src/arm64/qcom/sc7180.dtsi
@@ -662,6 +662,7 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SC7180_CX>;
 		};
 
 		qfprom: efuse@784000 {
@@ -795,7 +796,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -849,7 +850,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -939,7 +940,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1029,7 +1030,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1096,7 +1097,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi6_default>;
+				pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1186,7 +1187,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi8_default>;
+				pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1276,7 +1277,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi10_default>;
+				pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1330,7 +1331,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi11_default>;
+				pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1486,410 +1487,443 @@
 			gpio-ranges = <&tlmm 0 0 120>;
 			wakeup-parent = <&pdc>;
 
-			dp_hot_plug_det: dp-hot-plug-det {
-				pinmux {
-					pins = "gpio117";
-					function = "dp_hot";
-				};
+			dp_hot_plug_det: dp-hot-plug-det-state {
+				pins = "gpio117";
+				function = "dp_hot";
 			};
 
-			qspi_clk: qspi-clk {
-				pinmux {
-					pins = "gpio63";
-					function = "qspi_clk";
-				};
+			qspi_clk: qspi-clk-state {
+				pins = "gpio63";
+				function = "qspi_clk";
 			};
 
-			qspi_cs0: qspi-cs0 {
-				pinmux {
-					pins = "gpio68";
-					function = "qspi_cs";
-				};
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio68";
+				function = "qspi_cs";
 			};
 
-			qspi_cs1: qspi-cs1 {
-				pinmux {
-					pins = "gpio72";
-					function = "qspi_cs";
-				};
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio72";
+				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01 {
-				pinmux-data {
-					pins = "gpio64", "gpio65";
-					function = "qspi_data";
-				};
+			qspi_data01: qspi-data01-state {
+				pins = "gpio64", "gpio65";
+				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12 {
-				pinmux-data {
-					pins = "gpio66", "gpio67";
-					function = "qspi_data";
-				};
+			qspi_data12: qspi-data12-state {
+				pins = "gpio66", "gpio67";
+				function = "qspi_data";
 			};
 
-			qup_i2c0_default: qup-i2c0-default {
-				pinmux {
-					pins = "gpio34", "gpio35";
-					function = "qup00";
-				};
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup00";
 			};
 
-			qup_i2c1_default: qup-i2c1-default {
-				pinmux {
-					pins = "gpio0", "gpio1";
-					function = "qup01";
-				};
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup01";
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
-				pinmux {
-					pins = "gpio15", "gpio16";
-					function = "qup02_i2c";
-				};
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio15", "gpio16";
+				function = "qup02_i2c";
 			};
 
-			qup_i2c3_default: qup-i2c3-default {
-				pinmux {
-					pins = "gpio38", "gpio39";
-					function = "qup03";
-				};
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio38", "gpio39";
+				function = "qup03";
 			};
 
-			qup_i2c4_default: qup-i2c4-default {
-				pinmux {
-					pins = "gpio115", "gpio116";
-					function = "qup04_i2c";
-				};
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup04_i2c";
 			};
 
-			qup_i2c5_default: qup-i2c5-default {
-				pinmux {
-					pins = "gpio25", "gpio26";
-					function = "qup05";
-				};
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio25", "gpio26";
+				function = "qup05";
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
-				pinmux {
-					pins = "gpio59", "gpio60";
-					function = "qup10";
-				};
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio59", "gpio60";
+				function = "qup10";
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
-				pinmux {
-					pins = "gpio6", "gpio7";
-					function = "qup11_i2c";
-				};
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup11_i2c";
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
-				pinmux {
-					pins = "gpio42", "gpio43";
-					function = "qup12";
-				};
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio42", "gpio43";
+				function = "qup12";
 			};
 
-			qup_i2c9_default: qup-i2c9-default {
-				pinmux {
-					pins = "gpio46", "gpio47";
-					function = "qup13_i2c";
-				};
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio46", "gpio47";
+				function = "qup13_i2c";
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
-				pinmux {
-					pins = "gpio86", "gpio87";
-					function = "qup14";
-				};
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio86", "gpio87";
+				function = "qup14";
 			};
 
-			qup_i2c11_default: qup-i2c11-default {
-				pinmux {
-					pins = "gpio53", "gpio54";
-					function = "qup15";
-				};
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio53", "gpio54";
+				function = "qup15";
+			};
+
+			qup_spi0_spi: qup-spi0-spi-state {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup00";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio37";
+				function = "qup00";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio37";
+				function = "gpio";
+			};
+
+			qup_spi1_spi: qup-spi1-spi-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio3";
+				function = "qup01";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi3_spi: qup-spi3-spi-state {
+				pins = "gpio38", "gpio39", "gpio40";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio41";
+				function = "qup03";
 			};
 
-			qup_spi0_default: qup-spi0-default {
-				pinmux {
-					pins = "gpio34", "gpio35",
-					       "gpio36", "gpio37";
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio41";
+				function = "gpio";
+			};
+
+			qup_spi5_spi: qup-spi5-spi-state {
+				pins = "gpio25", "gpio26", "gpio27";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio28";
+				function = "qup05";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio28";
+				function = "gpio";
+			};
+
+			qup_spi6_spi: qup-spi6-spi-state {
+				pins = "gpio59", "gpio60", "gpio61";
+				function = "qup10";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio62";
+				function = "qup10";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio62";
+				function = "gpio";
+			};
+
+			qup_spi8_spi: qup-spi8-spi-state {
+				pins = "gpio42", "gpio43", "gpio44";
+				function = "qup12";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio45";
+				function = "qup12";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio45";
+				function = "gpio";
+			};
+
+			qup_spi10_spi: qup-spi10-spi-state {
+				pins = "gpio86", "gpio87", "gpio88";
+				function = "qup14";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio89";
+				function = "qup14";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio89";
+				function = "gpio";
+			};
+
+			qup_spi11_spi: qup-spi11-spi-state {
+				pins = "gpio53", "gpio54", "gpio55";
+				function = "qup15";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio56";
+				function = "qup15";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio56";
+				function = "gpio";
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				qup_uart0_cts: cts-pins {
+					pins = "gpio34";
 					function = "qup00";
 				};
-			};
 
-			qup_spi0_cs_gpio: qup-spi0-cs-gpio {
-				pinmux {
-					pins = "gpio34", "gpio35",
-					       "gpio36";
+				qup_uart0_rts: rts-pins {
+					pins = "gpio35";
 					function = "qup00";
 				};
 
-				pinmux-cs {
+				qup_uart0_tx: tx-pins {
+					pins = "gpio36";
+					function = "qup00";
+				};
+
+				qup_uart0_rx: rx-pins {
 					pins = "gpio37";
-					function = "gpio";
+					function = "qup00";
 				};
 			};
 
-			qup_spi1_default: qup-spi1-default {
-				pinmux {
-					pins = "gpio0", "gpio1",
-					       "gpio2", "gpio3";
+			qup_uart1_default: qup-uart1-default-state {
+				qup_uart1_cts: cts-pins {
+					pins = "gpio0";
 					function = "qup01";
 				};
-			};
 
-			qup_spi1_cs_gpio: qup-spi1-cs-gpio {
-				pinmux {
-					pins = "gpio0", "gpio1",
-					       "gpio2";
+				qup_uart1_rts: rts-pins {
+					pins = "gpio1";
 					function = "qup01";
 				};
 
-				pinmux-cs {
-					pins = "gpio3";
-					function = "gpio";
+				qup_uart1_tx: tx-pins {
+					pins = "gpio2";
+					function = "qup01";
 				};
-			};
 
-			qup_spi3_default: qup-spi3-default {
-				pinmux {
-					pins = "gpio38", "gpio39",
-					       "gpio40", "gpio41";
-					function = "qup03";
+				qup_uart1_rx: rx-pins {
+					pins = "gpio3";
+					function = "qup01";
 				};
 			};
 
-			qup_spi3_cs_gpio: qup-spi3-cs-gpio {
-				pinmux {
-					pins = "gpio38", "gpio39",
-					       "gpio40";
-					function = "qup03";
+			qup_uart2_default: qup-uart2-default-state {
+				qup_uart2_tx: tx-pins {
+					pins = "gpio15";
+					function = "qup02_uart";
 				};
 
-				pinmux-cs {
-					pins = "gpio41";
-					function = "gpio";
+				qup_uart2_rx: rx-pins {
+					pins = "gpio16";
+					function = "qup02_uart";
 				};
 			};
 
-			qup_spi5_default: qup-spi5-default {
-				pinmux {
-					pins = "gpio25", "gpio26",
-					       "gpio27", "gpio28";
-					function = "qup05";
+			qup_uart3_default: qup-uart3-default-state {
+				qup_uart3_cts: cts-pins {
+					pins = "gpio38";
+					function = "qup03";
 				};
-			};
 
-			qup_spi5_cs_gpio: qup-spi5-cs-gpio {
-				pinmux {
-					pins = "gpio25", "gpio26",
-					       "gpio27";
-					function = "qup05";
+				qup_uart3_rts: rts-pins {
+					pins = "gpio39";
+					function = "qup03";
 				};
 
-				pinmux-cs {
-					pins = "gpio28";
-					function = "gpio";
+				qup_uart3_tx: tx-pins {
+					pins = "gpio40";
+					function = "qup03";
 				};
-			};
 
-			qup_spi6_default: qup-spi6-default {
-				pinmux {
-					pins = "gpio59", "gpio60",
-					       "gpio61", "gpio62";
-					function = "qup10";
+				qup_uart3_rx: rx-pins {
+					pins = "gpio41";
+					function = "qup03";
 				};
 			};
 
-			qup_spi6_cs_gpio: qup-spi6-cs-gpio {
-				pinmux {
-					pins = "gpio59", "gpio60",
-					       "gpio61";
-					function = "qup10";
+			qup_uart4_default: qup-uart4-default-state {
+				qup_uart4_tx: tx-pins {
+					pins = "gpio115";
+					function = "qup04_uart";
 				};
 
-				pinmux-cs {
-					pins = "gpio62";
-					function = "gpio";
+				qup_uart4_rx: rx-pins {
+					pins = "gpio116";
+					function = "qup04_uart";
 				};
 			};
 
-			qup_spi8_default: qup-spi8-default {
-				pinmux {
-					pins = "gpio42", "gpio43",
-					       "gpio44", "gpio45";
-					function = "qup12";
+			qup_uart5_default: qup-uart5-default-state {
+				qup_uart5_cts: cts-pins {
+					pins = "gpio25";
+					function = "qup05";
 				};
-			};
 
-			qup_spi8_cs_gpio: qup-spi8-cs-gpio {
-				pinmux {
-					pins = "gpio42", "gpio43",
-					       "gpio44";
-					function = "qup12";
+				qup_uart5_rts: rts-pins {
+					pins = "gpio26";
+					function = "qup05";
 				};
 
-				pinmux-cs {
-					pins = "gpio45";
-					function = "gpio";
+				qup_uart5_tx: tx-pins {
+					pins = "gpio27";
+					function = "qup05";
 				};
-			};
 
-			qup_spi10_default: qup-spi10-default {
-				pinmux {
-					pins = "gpio86", "gpio87",
-					       "gpio88", "gpio89";
-					function = "qup14";
+				qup_uart5_rx: rx-pins {
+					pins = "gpio28";
+					function = "qup05";
 				};
 			};
 
-			qup_spi10_cs_gpio: qup-spi10-cs-gpio {
-				pinmux {
-					pins = "gpio86", "gpio87",
-					       "gpio88";
-					function = "qup14";
+			qup_uart6_default: qup-uart6-default-state {
+				qup_uart6_cts: cts-pins {
+					pins = "gpio59";
+					function = "qup10";
 				};
 
-				pinmux-cs {
-					pins = "gpio89";
-					function = "gpio";
+				qup_uart6_rts: rts-pins {
+					pins = "gpio60";
+					function = "qup10";
 				};
-			};
 
-			qup_spi11_default: qup-spi11-default {
-				pinmux {
-					pins = "gpio53", "gpio54",
-					       "gpio55", "gpio56";
-					function = "qup15";
+				qup_uart6_tx: tx-pins {
+					pins = "gpio61";
+					function = "qup10";
+				};
+
+				qup_uart6_rx: rx-pins {
+					pins = "gpio62";
+					function = "qup10";
 				};
 			};
 
-			qup_spi11_cs_gpio: qup-spi11-cs-gpio {
-				pinmux {
-					pins = "gpio53", "gpio54",
-					       "gpio55";
-					function = "qup15";
+			qup_uart7_default: qup-uart7-default-state {
+				qup_uart7_tx: tx-pins {
+					pins = "gpio6";
+					function = "qup11_uart";
 				};
 
-				pinmux-cs {
-					pins = "gpio56";
-					function = "gpio";
+				qup_uart7_rx: rx-pins {
+					pins = "gpio7";
+					function = "qup11_uart";
 				};
 			};
 
-			qup_uart0_default: qup-uart0-default {
-				pinmux {
-					pins = "gpio34", "gpio35",
-					       "gpio36", "gpio37";
-					function = "qup00";
+			qup_uart8_default: qup-uart8-default-state {
+				qup_uart8_tx: tx-pins {
+					pins = "gpio44";
+					function = "qup12";
 				};
-			};
 
-			qup_uart1_default: qup-uart1-default {
-				pinmux {
-					pins = "gpio0", "gpio1",
-					       "gpio2", "gpio3";
-					function = "qup01";
+				qup_uart8_rx: rx-pins {
+					pins = "gpio45";
+					function = "qup12";
 				};
 			};
 
-			qup_uart2_default: qup-uart2-default {
-				pinmux {
-					pins = "gpio15", "gpio16";
-					function = "qup02_uart";
+			qup_uart9_default: qup-uart9-default-state {
+				qup_uart9_tx: tx-pins {
+					pins = "gpio46";
+					function = "qup13_uart";
 				};
-			};
 
-			qup_uart3_default: qup-uart3-default {
-				pinmux {
-					pins = "gpio38", "gpio39",
-					       "gpio40", "gpio41";
-					function = "qup03";
+				qup_uart9_rx: rx-pins {
+					pins = "gpio47";
+					function = "qup13_uart";
 				};
 			};
 
-			qup_uart4_default: qup-uart4-default {
-				pinmux {
-					pins = "gpio115", "gpio116";
-					function = "qup04_uart";
+			qup_uart10_default: qup-uart10-default-state {
+				qup_uart10_cts: cts-pins {
+					pins = "gpio86";
+					function = "qup14";
 				};
-			};
 
-			qup_uart5_default: qup-uart5-default {
-				pinmux {
-					pins = "gpio25", "gpio26",
-					       "gpio27", "gpio28";
-					function = "qup05";
+				qup_uart10_rts: rts-pins {
+					pins = "gpio87";
+					function = "qup14";
 				};
-			};
 
-			qup_uart6_default: qup-uart6-default {
-				pinmux {
-					pins = "gpio59", "gpio60",
-					       "gpio61", "gpio62";
-					function = "qup10";
+				qup_uart10_tx: tx-pins {
+					pins = "gpio88";
+					function = "qup14";
 				};
-			};
 
-			qup_uart7_default: qup-uart7-default {
-				pinmux {
-					pins = "gpio6", "gpio7";
-					function = "qup11_uart";
+				qup_uart10_rx: rx-pins {
+					pins = "gpio89";
+					function = "qup14";
 				};
 			};
 
-			qup_uart8_default: qup-uart8-default {
-				pinmux {
-					pins = "gpio44", "gpio45";
-					function = "qup12";
+			qup_uart11_default: qup-uart11-default-state {
+				qup_uart11_cts: cts-pins {
+					pins = "gpio53";
+					function = "qup15";
 				};
-			};
 
-			qup_uart9_default: qup-uart9-default {
-				pinmux {
-					pins = "gpio46", "gpio47";
-					function = "qup13_uart";
+				qup_uart11_rts: rts-pins {
+					pins = "gpio54";
+					function = "qup15";
 				};
-			};
 
-			qup_uart10_default: qup-uart10-default {
-				pinmux {
-					pins = "gpio86", "gpio87",
-					       "gpio88", "gpio89";
-					function = "qup14";
+				qup_uart11_tx: tx-pins {
+					pins = "gpio55";
+					function = "qup15";
 				};
-			};
 
-			qup_uart11_default: qup-uart11-default {
-				pinmux {
-					pins = "gpio53", "gpio54",
-					       "gpio55", "gpio56";
+				qup_uart11_rx: rx-pins {
+					pins = "gpio56";
 					function = "qup15";
 				};
 			};
 
-			sec_mi2s_active: sec-mi2s-active {
-				pinmux {
-					pins = "gpio49", "gpio50", "gpio51";
-					function = "mi2s_1";
-				};
+			sec_mi2s_active: sec-mi2s-active-state {
+				pins = "gpio49", "gpio50", "gpio51";
+				function = "mi2s_1";
 			};
 
-			pri_mi2s_active: pri-mi2s-active {
-				pinmux {
-					pins = "gpio53", "gpio54", "gpio55", "gpio56";
-					function = "mi2s_0";
-				};
+			pri_mi2s_active: pri-mi2s-active-state {
+				pins = "gpio53", "gpio54", "gpio55", "gpio56";
+				function = "mi2s_0";
 			};
 
-			pri_mi2s_mclk_active: pri-mi2s-mclk-active {
-				pinmux {
-					pins = "gpio57";
-					function = "lpass_ext";
-				};
+			pri_mi2s_mclk_active: pri-mi2s-mclk-active-state {
+				pins = "gpio57";
+				function = "lpass_ext";
 			};
 		};
 
@@ -2775,6 +2809,7 @@
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -2782,6 +2817,8 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
+			wakeup-source;
+
 			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
@@ -3012,7 +3049,6 @@
 				power-domains = <&rpmhpd SC7180_CX>;
 
 				phys = <&dsi_phy>;
-				phy-names = "dsi";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3057,7 +3093,7 @@
 				};
 			};
 
-			dsi_phy: dsi-phy@ae94400 {
+			dsi_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -3522,7 +3558,7 @@
 		};
 
 		osm_l3: interconnect@18321000 {
-			compatible = "qcom,sc7180-osm-l3";
+			compatible = "qcom,sc7180-osm-l3", "qcom,osm-l3";
 			reg = <0 0x18321000 0 0x1400>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/dts/src/arm64/qcom/sc7280-chrome-common.dtsi b/dts/src/arm64/qcom/sc7280-chrome-common.dtsi
index 25f31c81b2..16fb20369c 100644
--- a/dts/src/arm64/qcom/sc7280-chrome-common.dtsi
+++ b/dts/src/arm64/qcom/sc7280-chrome-common.dtsi
@@ -39,20 +39,10 @@
 			no-map;
 		};
 
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		wpss_mem: memory@9ae00000 {
 			reg = <0x0 0x9ae00000 0x0 0x1900000>;
 			no-map;
 		};
-
-		mba_mem: memory@9c700000 {
-			reg = <0x0 0x9c700000 0x0 0x200000>;
-			no-map;
-		};
 	};
 };
 
@@ -88,11 +78,6 @@
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
 };
 
-/* Increase the size from 2.5MB to 8MB */
-&rmtfs_mem {
-	reg = <0x0 0x9c900000 0x0 0x800000>;
-};
-
 &wifi {
 	status = "okay";
 
diff --git a/dts/src/arm64/qcom/sc7280-crd-r3.dts b/dts/src/arm64/qcom/sc7280-crd-r3.dts
index dddb505e22..1185141f34 100644
--- a/dts/src/arm64/qcom/sc7280-crd-r3.dts
+++ b/dts/src/arm64/qcom/sc7280-crd-r3.dts
@@ -118,25 +118,25 @@ ap_ts_pen_1v8: &i2c13 {
 };
 
 &tlmm {
-	tp_int_odl: tp-int-odl {
+	tp_int_odl: tp-int-odl-state {
 		pins = "gpio7";
 		function = "gpio";
 		bias-disable;
 	};
 
-	ts_int_l: ts-int-l {
+	ts_int_l: ts-int-l-state {
 		pins = "gpio55";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ts_reset_l: ts-reset-l {
+	ts_reset_l: ts-reset-l-state {
 		pins = "gpio54";
 		function = "gpio";
 		bias-disable;
 	};
 
-	us_euro_hs_sel: us-euro-hs-sel {
+	us_euro_hs_sel: us-euro-hs-sel-state {
 		pins = "gpio81";
 		function = "gpio";
 		bias-pull-down;
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
new file mode 100644
index 0000000000..1ca11a1410
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec and having 3 dmics connected to sc7280.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-3mic";
+
+		audio-routing =	"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb",
+
+				"Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "ALC5682";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>,
+			<&lpass_dmic23_data>;
+
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-audio-rt5682.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-audio-rt5682.dtsi
new file mode 100644
index 0000000000..af685bc35e
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-1mic";
+
+		audio-routing = "Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "ALC5682";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index c72e53aaf9..ae2552094c 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/dts/src/arm64/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -167,10 +167,6 @@
 	bias-disable;
 };
 
-&lpass_dmic01_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic01_data {
 	bias-pull-down;
 };
@@ -180,10 +176,6 @@
 	bias-disable;
 };
 
-&lpass_dmic23_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic23_data {
 	bias-pull-down;
 };
@@ -194,30 +186,18 @@
 	bias-disable;
 };
 
-&lpass_rx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_rx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-bus-hold;
 };
 
-&lpass_rx_swr_data_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_clk {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-disable;
 };
 
-&lpass_tx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-crd.dts b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts
index f0f26af1e4..4e0b013e25 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-crd.dts
+++ b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts
@@ -372,5 +372,6 @@ ap_ts_pen_1v8: &i2c13 {
 			  "",				/* 170 */
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
+			  "",
 			  "";
 };
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-evoker-lte.dts b/dts/src/arm64/qcom/sc7280-herobrine-evoker-lte.dts
new file mode 100644
index 0000000000..14f20e7058
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-evoker-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Evoker with LTE";
+	compatible = "google,evoker-sku512", "qcom,sc7280";
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-evoker.dts b/dts/src/arm64/qcom/sc7280-herobrine-evoker.dts
new file mode 100644
index 0000000000..4f781fe25c
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-evoker.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Evoker";
+	compatible = "google,evoker", "qcom,sc7280";
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-evoker-r0.dts b/dts/src/arm64/qcom/sc7280-herobrine-evoker.dtsi
index ccbe50b624..3d639c70a0 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-evoker-r0.dts
+++ b/dts/src/arm64/qcom/sc7280-herobrine-evoker.dtsi
@@ -5,14 +5,8 @@
  * Copyright 2022 Google LLC.
  */
 
-/dts-v1/;
-
 #include "sc7280-herobrine.dtsi"
-
-/ {
-	model = "Google Evoker";
-	compatible = "google,evoker", "qcom,sc7280";
-};
+#include "sc7280-herobrine-audio-rt5682-3mic.dtsi"
 
 /*
  * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
@@ -30,16 +24,15 @@ ap_tp_i2c: &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	trackpad: trackpad@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tp_int_odl>;
 
 		interrupt-parent = <&tlmm>;
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 
-		hid-descr-addr = <0x20>;
 		vcc-supply = <&pp3300_z1>;
 
 		wakeup-source;
@@ -50,9 +43,9 @@ ts_i2c: &i2c13 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	ap_ts: touchscreen@10 {
-		compatible = "elan,ekth6915";
-		reg = <0x10>;
+	ap_ts: touchscreen@5d {
+		compatible = "goodix,gt7986u", "goodix,gt7375p";
+		reg = <0x5d>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
 
@@ -61,7 +54,7 @@ ts_i2c: &i2c13 {
 
 		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
-		vcc33-supply = <&ts_avdd>;
+		vdd-supply = <&ts_avdd>;
 	};
 };
 
@@ -328,6 +321,5 @@ ts_i2c: &i2c13 {
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
 			  "",
-			  "",
 			  "";
 };
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts
index c1a6719687..b04888a982 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
 #include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
@@ -47,10 +48,6 @@
 
 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
 
-&ap_spi_fp {
-	status = "okay";
-};
-
 /*
  * Although the trackpad is really part of the herobrine baseboard, we'll
  * put the actual definition in the board device tree since different boards
@@ -358,6 +355,5 @@ ts_i2c: &i2c13 {
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
 			  "",
-			  "",
 			  "";
 };
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
index a92eeccd2b..ad66e5e9db 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/dts/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -6,6 +6,20 @@
  */
 /* Modem setup is different on Chrome setups than typical Qualcomm setup */
 
+/ {
+	reserved-memory {
+		mpss_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		mba_mem: memory@9c700000 {
+			reg = <0x0 0x9c700000 0x0 0x200000>;
+			no-map;
+		};
+	};
+};
+
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
 	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
@@ -15,3 +29,8 @@
 			"qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
 	status = "okay";
 };
+
+/* Increase the size from 2.5MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x9c900000 0x0 0x800000>;
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-villager-r1-lte.dts b/dts/src/arm64/qcom/sc7280-herobrine-villager-r1-lte.dts
index f1017809e5..d71cc4bbc4 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-villager-r1-lte.dts
+++ b/dts/src/arm64/qcom/sc7280-herobrine-villager-r1-lte.dts
@@ -5,7 +5,9 @@
  * Copyright 2022 Google LLC.
  */
 
-#include "sc7280-herobrine-villager-r1.dts"
+/dts-v1/;
+
+#include "sc7280-herobrine-villager-r1.dtsi"
 #include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-villager-r1.dts b/dts/src/arm64/qcom/sc7280-herobrine-villager-r1.dts
index cfc6487269..edb52f12f0 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-villager-r1.dts
+++ b/dts/src/arm64/qcom/sc7280-herobrine-villager-r1.dts
@@ -7,37 +7,10 @@
 
 /dts-v1/;
 
-#include "sc7280-herobrine-villager.dtsi"
-#include "sc7280-herobrine-audio-wcd9385.dtsi"
+#include "sc7280-herobrine-villager-r1.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
 
 / {
 	model = "Google Villager (rev1+)";
 	compatible = "google,villager", "qcom,sc7280";
 };
-
-&lpass_va_macro {
-	vdd-micb-supply = <&pp1800_l2c>;
-};
-
-&sound {
-	audio-routing =
-			"IN1_HPHL", "HPHL_OUT",
-			"IN2_HPHR", "HPHR_OUT",
-			"AMIC1", "MIC BIAS1",
-			"AMIC2", "MIC BIAS2",
-			"VA DMIC0", "vdd-micb",
-			"VA DMIC1", "vdd-micb",
-			"VA DMIC2", "vdd-micb",
-			"VA DMIC3", "vdd-micb",
-			"TX SWR_ADC0", "ADC1_OUTPUT",
-			"TX SWR_ADC1", "ADC2_OUTPUT",
-			"TX SWR_ADC2", "ADC3_OUTPUT",
-			"TX SWR_DMIC0", "DMIC1_OUTPUT",
-			"TX SWR_DMIC1", "DMIC2_OUTPUT",
-			"TX SWR_DMIC2", "DMIC3_OUTPUT",
-			"TX SWR_DMIC3", "DMIC4_OUTPUT",
-			"TX SWR_DMIC4", "DMIC5_OUTPUT",
-			"TX SWR_DMIC5", "DMIC6_OUTPUT",
-			"TX SWR_DMIC6", "DMIC7_OUTPUT",
-			"TX SWR_DMIC7", "DMIC8_OUTPUT";
-};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-villager-r1.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-villager-r1.dtsi
new file mode 100644
index 0000000000..b25df5a991
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-villager-r1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-villager.dtsi"
+#include "sc7280-herobrine-audio-wcd9385.dtsi"
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+};
+
+&sound {
+	audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "vdd-micb",
+			"VA DMIC1", "vdd-micb",
+			"VA DMIC2", "vdd-micb",
+			"VA DMIC3", "vdd-micb",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-villager.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-villager.dtsi
index 4566722bf4..17553e0fd6 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine-villager.dtsi
+++ b/dts/src/arm64/qcom/sc7280-herobrine-villager.dtsi
@@ -78,16 +78,6 @@ ts_i2c: &i2c13 {
 	status = "okay";
 };
 
-/* For nvme */
-&pcie1 {
-	status = "okay";
-};
-
-/* For nvme */
-&pcie1_phy {
-	status = "okay";
-};
-
 &pwmleds {
 	status = "okay";
 };
@@ -321,6 +311,5 @@ ts_i2c: &i2c13 {
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
 			  "",
-			  "",
 			  "";
 };
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi
new file mode 100644
index 0000000000..2febd6126d
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for WIFI SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
+
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-zombie-lte.dts b/dts/src/arm64/qcom/sc7280-herobrine-zombie-lte.dts
new file mode 100644
index 0000000000..c9fe645295
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-zombie-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Zombie with LTE";
+	compatible = "google,zombie-sku512", "qcom,sc7280";
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-zombie.dts b/dts/src/arm64/qcom/sc7280-herobrine-zombie.dts
new file mode 100644
index 0000000000..0246c12b2f
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-zombie.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Zombie";
+	compatible = "google,zombie", "qcom,sc7280";
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine-zombie.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-zombie.dtsi
new file mode 100644
index 0000000000..7fc0b6bfc0
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-herobrine-zombie.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		hid-descr-addr = <0x01>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight{
+	/* Set the PWM period to 200 microseconds (5kHz duty cycle) */
+	pwms = <&pm8350c_pwm 3 200000>;
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "US_EURO_HS_SEL",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/dts/src/arm64/qcom/sc7280-herobrine.dtsi b/dts/src/arm64/qcom/sc7280-herobrine.dtsi
index c11e37160f..27f479ff9d 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine.dtsi
+++ b/dts/src/arm64/qcom/sc7280-herobrine.dtsi
@@ -307,7 +307,7 @@
 	pwmleds: pwmleds {
 		compatible = "pwm-leds";
 		status = "disabled";
-		keyboard_backlight: keyboard-backlight {
+		keyboard_backlight: led-0 {
 			label = "cros_ec::kbd_backlight";
 			function = LED_FUNCTION_KBD_BACKLIGHT;
 			pwms = <&cros_ec_pwm 0>;
@@ -503,13 +503,16 @@ ap_spi_fp: &spi9 {
 	cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
 
 	cros_ec_fp: ec@0 {
-		compatible = "google,cros-ec-spi";
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
 		reg = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
 		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_mcu>;
 	};
 };
 
@@ -627,6 +630,13 @@ ap_ec_spi: &spi10 {
 
 &usb_1_hsphy {
 	status = "okay";
+
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
 };
 
 &usb_1_qmpphy {
@@ -639,6 +649,21 @@ ap_ec_spi: &spi10 {
 	bias-disable;
 };
 
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
+
 &pcie1_clkreq_n {
 	bias-pull-up;
 	drive-strength = <2>;
@@ -744,27 +769,27 @@ ap_ec_spi: &spi10 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&bios_flash_wp_od>;
 
-	amp_en: amp-en-pins {
+	amp_en: amp-en-state {
 		pins = "gpio63";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ap_ec_int_l: ap-ec-int-l-pins {
+	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio18";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	bios_flash_wp_od: bios-flash-wp-od-pins {
+	bios_flash_wp_od: bios-flash-wp-od-state {
 		pins = "gpio16";
 		function = "gpio";
 		/* Has external pull */
 		bias-disable;
 	};
 
-	en_fp_rails: en-fp-rails-pins {
+	en_fp_rails: en-fp-rails-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-disable;
@@ -772,60 +797,60 @@ ap_ec_spi: &spi10 {
 		output-high;
 	};
 
-	en_pp3300_codec: en-pp3300-codec-pins {
+	en_pp3300_codec: en-pp3300-codec-state {
 		pins = "gpio105";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	en_pp3300_dx_edp: en-pp3300-dx-edp-pins {
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
 		pins = "gpio80";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	fp_rst_l: fp-rst-l-pins {
+	fp_rst_l: fp-rst-l-state {
 		pins = "gpio78";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	fp_to_ap_irq_l: fp-to-ap-irq-l-pins {
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
 		pins = "gpio61";
 		function = "gpio";
 		/* Has external pullup */
 		bias-disable;
 	};
 
-	fpmcu_boot0: fpmcu-boot0-pins {
+	fpmcu_boot0: fpmcu-boot0-state {
 		pins = "gpio68";
 		function = "gpio";
 		bias-disable;
 	};
 
-	gsc_ap_int_odl: gsc-ap-int-odl-pins {
+	gsc_ap_int_odl: gsc-ap-int-odl-state {
 		pins = "gpio104";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	hp_irq: hp-irq-pins {
+	hp_irq: hp-irq-state {
 		pins = "gpio101";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	hub_en: hub-en-pins {
+	hub_en: hub-en-state {
 		pins = "gpio157";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	pe_wake_odl: pe-wake-odl-pins {
+	pe_wake_odl: pe-wake-odl-state {
 		pins = "gpio3";
 		function = "gpio";
 		/* Has external pull */
@@ -834,45 +859,45 @@ ap_ec_spi: &spi10 {
 	};
 
 	/* For ap_spi_fp */
-	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins {
+	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state {
 		pins = "gpio39";
 		function = "gpio";
 		output-high;
 	};
 
 	/* For ap_ec_spi */
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
 		pins = "gpio43";
 		function = "gpio";
 		output-high;
 	};
 
-	sar0_irq_odl: sar0-irq-odl-pins {
+	sar0_irq_odl: sar0-irq-odl-state {
 		pins = "gpio141";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sar1_irq_odl: sar1-irq-odl-pins {
+	sar1_irq_odl: sar1-irq-odl-state {
 		pins = "gpio140";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sd_cd_odl: sd-cd-odl-pins {
+	sd_cd_odl: sd-cd-odl-state {
 		pins = "gpio91";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ssd_en: ssd-en-pins {
+	ssd_en: ssd-en-state {
 		pins = "gpio51";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ssd_rst_l: ssd-rst-l-pins {
+	ssd_rst_l: ssd-rst-l-state {
 		pins = "gpio2";
 		function = "gpio";
 		bias-disable;
@@ -880,14 +905,14 @@ ap_ec_spi: &spi10 {
 		output-low;
 	};
 
-	tp_int_odl: tp-int-odl-pins {
+	tp_int_odl: tp-int-odl-state {
 		pins = "gpio7";
 		function = "gpio";
 		/* Has external pullup */
 		bias-disable;
 	};
 
-	wf_cam_en: wf-cam-en-pins {
+	wf_cam_en: wf-cam-en-state {
 		pins = "gpio119";
 		function = "gpio";
 		/* Has external pulldown */
diff --git a/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi b/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
index 7f5143e9bb..3cfeb118d3 100644
--- a/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
+++ b/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
@@ -79,27 +79,29 @@ ap_h1_spi: &spi14 {
 };
 
 &tlmm {
-	ap_ec_int_l: ap-ec-int-l-pins {
+	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio18";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	h1_ap_int_odl: h1-ap-int-odl-pins {
+	h1_ap_int_odl: h1-ap-int-odl-state {
 		pins = "gpio104";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
 		pins = "gpio43";
+		function = "gpio";
 		output-high;
 	};
 
-	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins {
+	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
 		pins = "gpio59";
+		function = "gpio";
 		output-high;
 	};
 };
diff --git a/dts/src/arm64/qcom/sc7280-idp.dts b/dts/src/arm64/qcom/sc7280-idp.dts
index 7559164cdd..ba64316b44 100644
--- a/dts/src/arm64/qcom/sc7280-idp.dts
+++ b/dts/src/arm64/qcom/sc7280-idp.dts
@@ -10,7 +10,6 @@
 #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include "sc7280-idp.dtsi"
 #include "pmr735a.dtsi"
-#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
@@ -61,11 +60,6 @@
 	vddio-supply = <&vreg_l19b_1p8>;
 };
 
-&ipa {
-	status = "okay";
-	modem-init;
-};
-
 &pmk8350_rtc {
 	status = "okay";
 };
diff --git a/dts/src/arm64/qcom/sc7280-idp.dtsi b/dts/src/arm64/qcom/sc7280-idp.dtsi
index cd432a2856..f7efb9966a 100644
--- a/dts/src/arm64/qcom/sc7280-idp.dtsi
+++ b/dts/src/arm64/qcom/sc7280-idp.dtsi
@@ -13,6 +13,7 @@
 #include "pmk8350.dtsi"
 
 #include "sc7280-chrome-common.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	aliases {
@@ -34,7 +35,7 @@
 		pinctrl-0 = <&wcd_reset_n>;
 		pinctrl-1 = <&wcd_reset_n_sleep>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 
 		qcom,rx-device = <&wcd_rx>;
 		qcom,tx-device = <&wcd_tx>;
@@ -522,6 +523,12 @@
 	vdda-pll-supply = <&vreg_l10c_0p8>;
 	vdda33-supply = <&vreg_l2b_3p0>;
 	vdda18-supply = <&vreg_l1c_1p8>;
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
 };
 
 &usb_1_qmpphy {
@@ -569,10 +576,6 @@
 	bias-disable;
 };
 
-&lpass_dmic01_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic01_data {
 	bias-pull-down;
 };
@@ -582,10 +585,6 @@
 	bias-disable;
 };
 
-&lpass_dmic23_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic23_data {
 	bias-pull-down;
 };
@@ -596,30 +595,18 @@
 	bias-disable;
 };
 
-&lpass_rx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_rx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-bus-hold;
 };
 
-&lpass_rx_swr_data_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_clk {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-disable;
 };
 
-&lpass_tx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
@@ -747,24 +734,24 @@
 };
 
 &tlmm {
-	amp_en: amp-en {
+	amp_en: amp-en-state {
 		pins = "gpio63";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
 
-	bt_en: bt-en-pins {
+	bt_en: bt-en-state {
 		pins = "gpio85";
 		function = "gpio";
 		output-low;
 		bias-disable;
 	};
 
-	nvme_pwren: nvme-pwren-pins {
+	nvme_pwren: nvme-pwren-state {
 		function = "gpio";
 	};
 
-	pcie1_reset_n: pcie1-reset-n-pins {
+	pcie1_reset_n: pcie1-reset-n-state {
 		pins = "gpio2";
 		function = "gpio";
 
@@ -773,7 +760,7 @@
 		bias-disable;
 	};
 
-	pcie1_wake_n: pcie1-wake-n-pins {
+	pcie1_wake_n: pcie1-wake-n-state {
 		pins = "gpio3";
 		function = "gpio";
 
@@ -781,7 +768,7 @@
 		bias-pull-up;
 	};
 
-	qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
 		pins = "gpio28";
 		function = "gpio";
 		/*
@@ -794,7 +781,7 @@
 		bias-bus-hold;
 	};
 
-	qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
 		pins = "gpio29";
 		function = "gpio";
 		/*
@@ -806,7 +793,7 @@
 		bias-pull-down;
 	};
 
-	qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
 		pins = "gpio30";
 		function = "gpio";
 		/*
@@ -816,7 +803,7 @@
 		bias-pull-up;
 	};
 
-	qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
 		pins = "gpio31";
 		function = "gpio";
 		/*
@@ -827,25 +814,25 @@
 		bias-pull-up;
 	};
 
-	sd_cd: sd-cd-pins {
+	sd_cd: sd-cd-state {
 		pins = "gpio91";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sw_ctrl: sw-ctrl-pins {
+	sw_ctrl: sw-ctrl-state {
 		pins = "gpio86";
 		function = "gpio";
 		bias-pull-down;
 	};
 
-	wcd_reset_n: wcd-reset-n {
+	wcd_reset_n: wcd-reset-n-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
 	};
 
-	wcd_reset_n_sleep: wcd-reset-n-sleep {
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
diff --git a/dts/src/arm64/qcom/sc7280-qcard.dtsi b/dts/src/arm64/qcom/sc7280-qcard.dtsi
index 4b8c676b0b..df49564ae6 100644
--- a/dts/src/arm64/qcom/sc7280-qcard.dtsi
+++ b/dts/src/arm64/qcom/sc7280-qcard.dtsi
@@ -37,7 +37,7 @@
 		pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
 		pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 		us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 		qcom,rx-device = <&wcd_rx>;
@@ -595,7 +595,7 @@ mos_bt_uart: &uart7 {
 };
 
 &tlmm {
-	mos_bt_en: mos-bt-en-pins {
+	mos_bt_en: mos-bt-en-state {
 		pins = "gpio85";
 		function = "gpio";
 		drive-strength = <2>;
@@ -603,7 +603,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
 		pins = "gpio28";
 		function = "gpio";
 		/*
@@ -617,7 +617,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
 		pins = "gpio29";
 		function = "gpio";
 		/*
@@ -630,7 +630,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
 		pins = "gpio31";
 		function = "gpio";
 		/*
@@ -642,7 +642,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
 		pins = "gpio30";
 		function = "gpio";
 		/*
@@ -652,32 +652,32 @@ mos_bt_uart: &uart7 {
 		bias-pull-up;
 	};
 
-	ts_int_conn: ts-int-conn-pins {
+	ts_int_conn: ts-int-conn-state {
 		pins = "gpio55";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ts_rst_conn: ts-rst-conn-pins {
+	ts_rst_conn: ts-rst-conn-state {
 		pins = "gpio54";
 		function = "gpio";
 		drive-strength = <2>;
 	};
 
-	us_euro_hs_sel: us-euro-hs-sel {
+	us_euro_hs_sel: us-euro-hs-sel-state {
 		pins = "gpio81";
 		function = "gpio";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
 
-	wcd_reset_n: wcd-reset-n {
+	wcd_reset_n: wcd-reset-n-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
 	};
 
-	wcd_reset_n_sleep: wcd-reset-n-sleep {
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
diff --git a/dts/src/arm64/qcom/sc7280.dtsi b/dts/src/arm64/qcom/sc7280.dtsi
index 4cdc88d339..0adf13399e 100644
--- a/dts/src/arm64/qcom/sc7280.dtsi
+++ b/dts/src/arm64/qcom/sc7280.dtsi
@@ -752,6 +752,17 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		wlan_smp2p_out: wlan-ap-to-wpss {
+			qcom,entry-name = "wlan";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmu {
@@ -920,7 +931,7 @@
 
 		gpi_dma0: dma-controller@900000 {
 			#dma-cells = <3>;
-			compatible = "qcom,sc7280-gpi-dma";
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -967,6 +978,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1025,6 +1038,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1083,6 +1098,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1141,6 +1158,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1199,6 +1218,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1257,6 +1278,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1315,6 +1338,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1373,6 +1398,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1419,7 +1446,7 @@
 
 		gpi_dma1: dma-controller@a00000 {
 			#dma-cells = <3>;
-			compatible = "qcom,sc7280-gpi-dma";
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -1466,6 +1493,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1524,6 +1553,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1582,6 +1613,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1640,6 +1673,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1698,6 +1733,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1756,6 +1793,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1814,6 +1853,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1872,6 +1913,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -2004,6 +2047,8 @@
 			qcom,rproc = <&remoteproc_wpss>;
 			memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
 			status = "disabled";
+			qcom,smem-states = <&wlan_smp2p_out 0>;
+			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
 		pcie1: pci@1c08000 {
@@ -2285,7 +2330,6 @@
 			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00>;
-			qcom,port-offset = <1>;
 
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
@@ -2434,84 +2478,42 @@
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 15>;
 
-			#clock-cells = <1>;
-
-			lpass_dmic01_clk: dmic01-clk {
-				pins = "gpio6";
-				function = "dmic1_clk";
-			};
-
-			lpass_dmic01_clk_sleep: dmic01-clk-sleep {
+			lpass_dmic01_clk: dmic01-clk-state {
 				pins = "gpio6";
 				function = "dmic1_clk";
 			};
 
-			lpass_dmic01_data: dmic01-data {
+			lpass_dmic01_data: dmic01-data-state {
 				pins = "gpio7";
 				function = "dmic1_data";
 			};
 
-			lpass_dmic01_data_sleep: dmic01-data-sleep {
-				pins = "gpio7";
-				function = "dmic1_data";
-			};
-
-			lpass_dmic23_clk: dmic23-clk {
-				pins = "gpio8";
-				function = "dmic2_clk";
-			};
-
-			lpass_dmic23_clk_sleep: dmic23-clk-sleep {
+			lpass_dmic23_clk: dmic23-clk-state {
 				pins = "gpio8";
 				function = "dmic2_clk";
 			};
 
-			lpass_dmic23_data: dmic23-data {
+			lpass_dmic23_data: dmic23-data-state {
 				pins = "gpio9";
 				function = "dmic2_data";
 			};
 
-			lpass_dmic23_data_sleep: dmic23-data-sleep {
-				pins = "gpio9";
-				function = "dmic2_data";
-			};
-
-			lpass_rx_swr_clk: rx-swr-clk {
+			lpass_rx_swr_clk: rx-swr-clk-state {
 				pins = "gpio3";
 				function = "swr_rx_clk";
 			};
 
-			lpass_rx_swr_clk_sleep: rx-swr-clk-sleep {
-				pins = "gpio3";
-				function = "swr_rx_clk";
-			};
-
-			lpass_rx_swr_data: rx-swr-data {
+			lpass_rx_swr_data: rx-swr-data-state {
 				pins = "gpio4", "gpio5";
 				function = "swr_rx_data";
 			};
 
-			lpass_rx_swr_data_sleep: rx-swr-data-sleep {
-				pins = "gpio4", "gpio5";
-				function = "swr_rx_data";
-			};
-
-			lpass_tx_swr_clk: tx-swr-clk {
-				pins = "gpio0";
-				function = "swr_tx_clk";
-			};
-
-			lpass_tx_swr_clk_sleep: tx-swr-clk-sleep {
+			lpass_tx_swr_clk: tx-swr-clk-state {
 				pins = "gpio0";
 				function = "swr_tx_clk";
 			};
 
-			lpass_tx_swr_data: tx-swr-data {
-				pins = "gpio1", "gpio2", "gpio14";
-				function = "swr_tx_data";
-			};
-
-			lpass_tx_swr_data_sleep: tx-swr-data-sleep {
+			lpass_tx_swr_data: tx-swr-data-state {
 				pins = "gpio1", "gpio2", "gpio14";
 				function = "swr_tx_data";
 			};
@@ -3924,11 +3926,13 @@
 					      "iface",
 					      "bus";
 
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;
 
 				phys = <&mdss_dsi_phy>;
-				phy-names = "dsi";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -4259,791 +4263,791 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
-			dp_hot_plug_det: dp-hot-plug-det-pins {
+			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
 			};
 
-			edp_hot_plug_det: edp-hot-plug-det-pins {
+			edp_hot_plug_det: edp-hot-plug-det-state {
 				pins = "gpio60";
 				function = "edp_hot";
 			};
 
-			mi2s0_data0: mi2s0-data0-pins {
+			mi2s0_data0: mi2s0-data0-state {
 				pins = "gpio98";
 				function = "mi2s0_data0";
 			};
 
-			mi2s0_data1: mi2s0-data1-pins {
+			mi2s0_data1: mi2s0-data1-state {
 				pins = "gpio99";
 				function = "mi2s0_data1";
 			};
 
-			mi2s0_mclk: mi2s0-mclk-pins {
+			mi2s0_mclk: mi2s0-mclk-state {
 				pins = "gpio96";
 				function = "pri_mi2s";
 			};
 
-			mi2s0_sclk: mi2s0-sclk-pins {
+			mi2s0_sclk: mi2s0-sclk-state {
 				pins = "gpio97";
 				function = "mi2s0_sck";
 			};
 
-			mi2s0_ws: mi2s0-ws-pins {
+			mi2s0_ws: mi2s0-ws-state {
 				pins = "gpio100";
 				function = "mi2s0_ws";
 			};
 
-			mi2s1_data0: mi2s1-data0-pins {
+			mi2s1_data0: mi2s1-data0-state {
 				pins = "gpio107";
 				function = "mi2s1_data0";
 			};
 
-			mi2s1_sclk: mi2s1-sclk-pins {
+			mi2s1_sclk: mi2s1-sclk-state {
 				pins = "gpio106";
 				function = "mi2s1_sck";
 			};
 
-			mi2s1_ws: mi2s1-ws-pins {
+			mi2s1_ws: mi2s1-ws-state {
 				pins = "gpio108";
 				function = "mi2s1_ws";
 			};
 
-			pcie1_clkreq_n: pcie1-clkreq-n-pins {
+			pcie1_clkreq_n: pcie1-clkreq-n-state {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
 			};
 
-			qspi_clk: qspi-clk-pins {
+			qspi_clk: qspi-clk-state {
 				pins = "gpio14";
 				function = "qspi_clk";
 			};
 
-			qspi_cs0: qspi-cs0-pins {
+			qspi_cs0: qspi-cs0-state {
 				pins = "gpio15";
 				function = "qspi_cs";
 			};
 
-			qspi_cs1: qspi-cs1-pins {
+			qspi_cs1: qspi-cs1-state {
 				pins = "gpio19";
 				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01-pins {
+			qspi_data01: qspi-data01-state {
 				pins = "gpio12", "gpio13";
 				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12-pins {
+			qspi_data12: qspi-data12-state {
 				pins = "gpio16", "gpio17";
 				function = "qspi_data";
 			};
 
-			qup_i2c0_data_clk: qup-i2c0-data-clk-pins {
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				pins = "gpio0", "gpio1";
 				function = "qup00";
 			};
 
-			qup_i2c1_data_clk: qup-i2c1-data-clk-pins {
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 				pins = "gpio4", "gpio5";
 				function = "qup01";
 			};
 
-			qup_i2c2_data_clk: qup-i2c2-data-clk-pins {
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
 				pins = "gpio8", "gpio9";
 				function = "qup02";
 			};
 
-			qup_i2c3_data_clk: qup-i2c3-data-clk-pins {
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
 				pins = "gpio12", "gpio13";
 				function = "qup03";
 			};
 
-			qup_i2c4_data_clk: qup-i2c4-data-clk-pins {
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
 				pins = "gpio16", "gpio17";
 				function = "qup04";
 			};
 
-			qup_i2c5_data_clk: qup-i2c5-data-clk-pins {
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
 				pins = "gpio20", "gpio21";
 				function = "qup05";
 			};
 
-			qup_i2c6_data_clk: qup-i2c6-data-clk-pins {
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
 				pins = "gpio24", "gpio25";
 				function = "qup06";
 			};
 
-			qup_i2c7_data_clk: qup-i2c7-data-clk-pins {
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
 				pins = "gpio28", "gpio29";
 				function = "qup07";
 			};
 
-			qup_i2c8_data_clk: qup-i2c8-data-clk-pins {
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
 				pins = "gpio32", "gpio33";
 				function = "qup10";
 			};
 
-			qup_i2c9_data_clk: qup-i2c9-data-clk-pins {
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
 				pins = "gpio36", "gpio37";
 				function = "qup11";
 			};
 
-			qup_i2c10_data_clk: qup-i2c10-data-clk-pins {
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
 				pins = "gpio40", "gpio41";
 				function = "qup12";
 			};
 
-			qup_i2c11_data_clk: qup-i2c11-data-clk-pins {
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
 				pins = "gpio44", "gpio45";
 				function = "qup13";
 			};
 
-			qup_i2c12_data_clk: qup-i2c12-data-clk-pins {
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
 				pins = "gpio48", "gpio49";
 				function = "qup14";
 			};
 
-			qup_i2c13_data_clk: qup-i2c13-data-clk-pins {
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
 				pins = "gpio52", "gpio53";
 				function = "qup15";
 			};
 
-			qup_i2c14_data_clk: qup-i2c14-data-clk-pins {
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
 				pins = "gpio56", "gpio57";
 				function = "qup16";
 			};
 
-			qup_i2c15_data_clk: qup-i2c15-data-clk-pins {
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
 				pins = "gpio60", "gpio61";
 				function = "qup17";
 			};
 
-			qup_spi0_data_clk: qup-spi0-data-clk-pins {
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
 				pins = "gpio0", "gpio1", "gpio2";
 				function = "qup00";
 			};
 
-			qup_spi0_cs: qup-spi0-cs-pins {
+			qup_spi0_cs: qup-spi0-cs-state {
 				pins = "gpio3";
 				function = "qup00";
 			};
 
-			qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins {
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
 				pins = "gpio3";
 				function = "gpio";
 			};
 
-			qup_spi1_data_clk: qup-spi1-data-clk-pins {
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
 				pins = "gpio4", "gpio5", "gpio6";
 				function = "qup01";
 			};
 
-			qup_spi1_cs: qup-spi1-cs-pins {
+			qup_spi1_cs: qup-spi1-cs-state {
 				pins = "gpio7";
 				function = "qup01";
 			};
 
-			qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins {
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
 				pins = "gpio7";
 				function = "gpio";
 			};
 
-			qup_spi2_data_clk: qup-spi2-data-clk-pins {
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
 				pins = "gpio8", "gpio9", "gpio10";
 				function = "qup02";
 			};
 
-			qup_spi2_cs: qup-spi2-cs-pins {
+			qup_spi2_cs: qup-spi2-cs-state {
 				pins = "gpio11";
 				function = "qup02";
 			};
 
-			qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins {
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
 				pins = "gpio11";
 				function = "gpio";
 			};
 
-			qup_spi3_data_clk: qup-spi3-data-clk-pins {
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
 				pins = "gpio12", "gpio13", "gpio14";
 				function = "qup03";
 			};
 
-			qup_spi3_cs: qup-spi3-cs-pins {
+			qup_spi3_cs: qup-spi3-cs-state {
 				pins = "gpio15";
 				function = "qup03";
 			};
 
-			qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins {
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
 				pins = "gpio15";
 				function = "gpio";
 			};
 
-			qup_spi4_data_clk: qup-spi4-data-clk-pins {
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
 				pins = "gpio16", "gpio17", "gpio18";
 				function = "qup04";
 			};
 
-			qup_spi4_cs: qup-spi4-cs-pins {
+			qup_spi4_cs: qup-spi4-cs-state {
 				pins = "gpio19";
 				function = "qup04";
 			};
 
-			qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins {
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
 				pins = "gpio19";
 				function = "gpio";
 			};
 
-			qup_spi5_data_clk: qup-spi5-data-clk-pins {
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
 				pins = "gpio20", "gpio21", "gpio22";
 				function = "qup05";
 			};
 
-			qup_spi5_cs: qup-spi5-cs-pins {
+			qup_spi5_cs: qup-spi5-cs-state {
 				pins = "gpio23";
 				function = "qup05";
 			};
 
-			qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins {
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
 				pins = "gpio23";
 				function = "gpio";
 			};
 
-			qup_spi6_data_clk: qup-spi6-data-clk-pins {
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
 				pins = "gpio24", "gpio25", "gpio26";
 				function = "qup06";
 			};
 
-			qup_spi6_cs: qup-spi6-cs-pins {
+			qup_spi6_cs: qup-spi6-cs-state {
 				pins = "gpio27";
 				function = "qup06";
 			};
 
-			qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins {
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
 				pins = "gpio27";
 				function = "gpio";
 			};
 
-			qup_spi7_data_clk: qup-spi7-data-clk-pins {
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
 				pins = "gpio28", "gpio29", "gpio30";
 				function = "qup07";
 			};
 
-			qup_spi7_cs: qup-spi7-cs-pins {
+			qup_spi7_cs: qup-spi7-cs-state {
 				pins = "gpio31";
 				function = "qup07";
 			};
 
-			qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins {
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
 				pins = "gpio31";
 				function = "gpio";
 			};
 
-			qup_spi8_data_clk: qup-spi8-data-clk-pins {
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
 				pins = "gpio32", "gpio33", "gpio34";
 				function = "qup10";
 			};
 
-			qup_spi8_cs: qup-spi8-cs-pins {
+			qup_spi8_cs: qup-spi8-cs-state {
 				pins = "gpio35";
 				function = "qup10";
 			};
 
-			qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins {
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
 				pins = "gpio35";
 				function = "gpio";
 			};
 
-			qup_spi9_data_clk: qup-spi9-data-clk-pins {
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
 				pins = "gpio36", "gpio37", "gpio38";
 				function = "qup11";
 			};
 
-			qup_spi9_cs: qup-spi9-cs-pins {
+			qup_spi9_cs: qup-spi9-cs-state {
 				pins = "gpio39";
 				function = "qup11";
 			};
 
-			qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins {
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
 				pins = "gpio39";
 				function = "gpio";
 			};
 
-			qup_spi10_data_clk: qup-spi10-data-clk-pins {
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
 				pins = "gpio40", "gpio41", "gpio42";
 				function = "qup12";
 			};
 
-			qup_spi10_cs: qup-spi10-cs-pins {
+			qup_spi10_cs: qup-spi10-cs-state {
 				pins = "gpio43";
 				function = "qup12";
 			};
 
-			qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins {
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
 				pins = "gpio43";
 				function = "gpio";
 			};
 
-			qup_spi11_data_clk: qup-spi11-data-clk-pins {
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
 				pins = "gpio44", "gpio45", "gpio46";
 				function = "qup13";
 			};
 
-			qup_spi11_cs: qup-spi11-cs-pins {
+			qup_spi11_cs: qup-spi11-cs-state {
 				pins = "gpio47";
 				function = "qup13";
 			};
 
-			qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins {
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
 				pins = "gpio47";
 				function = "gpio";
 			};
 
-			qup_spi12_data_clk: qup-spi12-data-clk-pins {
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
 				pins = "gpio48", "gpio49", "gpio50";
 				function = "qup14";
 			};
 
-			qup_spi12_cs: qup-spi12-cs-pins {
+			qup_spi12_cs: qup-spi12-cs-state {
 				pins = "gpio51";
 				function = "qup14";
 			};
 
-			qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins {
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
 				pins = "gpio51";
 				function = "gpio";
 			};
 
-			qup_spi13_data_clk: qup-spi13-data-clk-pins {
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
 				pins = "gpio52", "gpio53", "gpio54";
 				function = "qup15";
 			};
 
-			qup_spi13_cs: qup-spi13-cs-pins {
+			qup_spi13_cs: qup-spi13-cs-state {
 				pins = "gpio55";
 				function = "qup15";
 			};
 
-			qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins {
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
 				pins = "gpio55";
 				function = "gpio";
 			};
 
-			qup_spi14_data_clk: qup-spi14-data-clk-pins {
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
 				pins = "gpio56", "gpio57", "gpio58";
 				function = "qup16";
 			};
 
-			qup_spi14_cs: qup-spi14-cs-pins {
+			qup_spi14_cs: qup-spi14-cs-state {
 				pins = "gpio59";
 				function = "qup16";
 			};
 
-			qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins {
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
 				pins = "gpio59";
 				function = "gpio";
 			};
 
-			qup_spi15_data_clk: qup-spi15-data-clk-pins {
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
 				pins = "gpio60", "gpio61", "gpio62";
 				function = "qup17";
 			};
 
-			qup_spi15_cs: qup-spi15-cs-pins {
+			qup_spi15_cs: qup-spi15-cs-state {
 				pins = "gpio63";
 				function = "qup17";
 			};
 
-			qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins {
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
 				pins = "gpio63";
 				function = "gpio";
 			};
 
-			qup_uart0_cts: qup-uart0-cts-pins {
+			qup_uart0_cts: qup-uart0-cts-state {
 				pins = "gpio0";
 				function = "qup00";
 			};
 
-			qup_uart0_rts: qup-uart0-rts-pins {
+			qup_uart0_rts: qup-uart0-rts-state {
 				pins = "gpio1";
 				function = "qup00";
 			};
 
-			qup_uart0_tx: qup-uart0-tx-pins {
+			qup_uart0_tx: qup-uart0-tx-state {
 				pins = "gpio2";
 				function = "qup00";
 			};
 
-			qup_uart0_rx: qup-uart0-rx-pins {
+			qup_uart0_rx: qup-uart0-rx-state {
 				pins = "gpio3";
 				function = "qup00";
 			};
 
-			qup_uart1_cts: qup-uart1-cts-pins {
+			qup_uart1_cts: qup-uart1-cts-state {
 				pins = "gpio4";
 				function = "qup01";
 			};
 
-			qup_uart1_rts: qup-uart1-rts-pins {
+			qup_uart1_rts: qup-uart1-rts-state {
 				pins = "gpio5";
 				function = "qup01";
 			};
 
-			qup_uart1_tx: qup-uart1-tx-pins {
+			qup_uart1_tx: qup-uart1-tx-state {
 				pins = "gpio6";
 				function = "qup01";
 			};
 
-			qup_uart1_rx: qup-uart1-rx-pins {
+			qup_uart1_rx: qup-uart1-rx-state {
 				pins = "gpio7";
 				function = "qup01";
 			};
 
-			qup_uart2_cts: qup-uart2-cts-pins {
+			qup_uart2_cts: qup-uart2-cts-state {
 				pins = "gpio8";
 				function = "qup02";
 			};
 
-			qup_uart2_rts: qup-uart2-rts-pins {
+			qup_uart2_rts: qup-uart2-rts-state {
 				pins = "gpio9";
 				function = "qup02";
 			};
 
-			qup_uart2_tx: qup-uart2-tx-pins {
+			qup_uart2_tx: qup-uart2-tx-state {
 				pins = "gpio10";
 				function = "qup02";
 			};
 
-			qup_uart2_rx: qup-uart2-rx-pins {
+			qup_uart2_rx: qup-uart2-rx-state {
 				pins = "gpio11";
 				function = "qup02";
 			};
 
-			qup_uart3_cts: qup-uart3-cts-pins {
+			qup_uart3_cts: qup-uart3-cts-state {
 				pins = "gpio12";
 				function = "qup03";
 			};
 
-			qup_uart3_rts: qup-uart3-rts-pins {
+			qup_uart3_rts: qup-uart3-rts-state {
 				pins = "gpio13";
 				function = "qup03";
 			};
 
-			qup_uart3_tx: qup-uart3-tx-pins {
+			qup_uart3_tx: qup-uart3-tx-state {
 				pins = "gpio14";
 				function = "qup03";
 			};
 
-			qup_uart3_rx: qup-uart3-rx-pins {
+			qup_uart3_rx: qup-uart3-rx-state {
 				pins = "gpio15";
 				function = "qup03";
 			};
 
-			qup_uart4_cts: qup-uart4-cts-pins {
+			qup_uart4_cts: qup-uart4-cts-state {
 				pins = "gpio16";
 				function = "qup04";
 			};
 
-			qup_uart4_rts: qup-uart4-rts-pins {
+			qup_uart4_rts: qup-uart4-rts-state {
 				pins = "gpio17";
 				function = "qup04";
 			};
 
-			qup_uart4_tx: qup-uart4-tx-pins {
+			qup_uart4_tx: qup-uart4-tx-state {
 				pins = "gpio18";
 				function = "qup04";
 			};
 
-			qup_uart4_rx: qup-uart4-rx-pins {
+			qup_uart4_rx: qup-uart4-rx-state {
 				pins = "gpio19";
 				function = "qup04";
 			};
 
-			qup_uart5_cts: qup-uart5-cts-pins {
+			qup_uart5_cts: qup-uart5-cts-state {
 				pins = "gpio20";
 				function = "qup05";
 			};
 
-			qup_uart5_rts: qup-uart5-rts-pins {
+			qup_uart5_rts: qup-uart5-rts-state {
 				pins = "gpio21";
 				function = "qup05";
 			};
 
-			qup_uart5_tx: qup-uart5-tx-pins {
+			qup_uart5_tx: qup-uart5-tx-state {
 				pins = "gpio22";
 				function = "qup05";
 			};
 
-			qup_uart5_rx: qup-uart5-rx-pins {
+			qup_uart5_rx: qup-uart5-rx-state {
 				pins = "gpio23";
 				function = "qup05";
 			};
 
-			qup_uart6_cts: qup-uart6-cts-pins {
+			qup_uart6_cts: qup-uart6-cts-state {
 				pins = "gpio24";
 				function = "qup06";
 			};
 
-			qup_uart6_rts: qup-uart6-rts-pins {
+			qup_uart6_rts: qup-uart6-rts-state {
 				pins = "gpio25";
 				function = "qup06";
 			};
 
-			qup_uart6_tx: qup-uart6-tx-pins {
+			qup_uart6_tx: qup-uart6-tx-state {
 				pins = "gpio26";
 				function = "qup06";
 			};
 
-			qup_uart6_rx: qup-uart6-rx-pins {
+			qup_uart6_rx: qup-uart6-rx-state {
 				pins = "gpio27";
 				function = "qup06";
 			};
 
-			qup_uart7_cts: qup-uart7-cts-pins {
+			qup_uart7_cts: qup-uart7-cts-state {
 				pins = "gpio28";
 				function = "qup07";
 			};
 
-			qup_uart7_rts: qup-uart7-rts-pins {
+			qup_uart7_rts: qup-uart7-rts-state {
 				pins = "gpio29";
 				function = "qup07";
 			};
 
-			qup_uart7_tx: qup-uart7-tx-pins {
+			qup_uart7_tx: qup-uart7-tx-state {
 				pins = "gpio30";
 				function = "qup07";
 			};
 
-			qup_uart7_rx: qup-uart7-rx-pins {
+			qup_uart7_rx: qup-uart7-rx-state {
 				pins = "gpio31";
 				function = "qup07";
 			};
 
-			qup_uart8_cts: qup-uart8-cts-pins {
+			qup_uart8_cts: qup-uart8-cts-state {
 				pins = "gpio32";
 				function = "qup10";
 			};
 
-			qup_uart8_rts: qup-uart8-rts-pins {
+			qup_uart8_rts: qup-uart8-rts-state {
 				pins = "gpio33";
 				function = "qup10";
 			};
 
-			qup_uart8_tx: qup-uart8-tx-pins {
+			qup_uart8_tx: qup-uart8-tx-state {
 				pins = "gpio34";
 				function = "qup10";
 			};
 
-			qup_uart8_rx: qup-uart8-rx-pins {
+			qup_uart8_rx: qup-uart8-rx-state {
 				pins = "gpio35";
 				function = "qup10";
 			};
 
-			qup_uart9_cts: qup-uart9-cts-pins {
+			qup_uart9_cts: qup-uart9-cts-state {
 				pins = "gpio36";
 				function = "qup11";
 			};
 
-			qup_uart9_rts: qup-uart9-rts-pins {
+			qup_uart9_rts: qup-uart9-rts-state {
 				pins = "gpio37";
 				function = "qup11";
 			};
 
-			qup_uart9_tx: qup-uart9-tx-pins {
+			qup_uart9_tx: qup-uart9-tx-state {
 				pins = "gpio38";
 				function = "qup11";
 			};
 
-			qup_uart9_rx: qup-uart9-rx-pins {
+			qup_uart9_rx: qup-uart9-rx-state {
 				pins = "gpio39";
 				function = "qup11";
 			};
 
-			qup_uart10_cts: qup-uart10-cts-pins {
+			qup_uart10_cts: qup-uart10-cts-state {
 				pins = "gpio40";
 				function = "qup12";
 			};
 
-			qup_uart10_rts: qup-uart10-rts-pins {
+			qup_uart10_rts: qup-uart10-rts-state {
 				pins = "gpio41";
 				function = "qup12";
 			};
 
-			qup_uart10_tx: qup-uart10-tx-pins {
+			qup_uart10_tx: qup-uart10-tx-state {
 				pins = "gpio42";
 				function = "qup12";
 			};
 
-			qup_uart10_rx: qup-uart10-rx-pins {
+			qup_uart10_rx: qup-uart10-rx-state {
 				pins = "gpio43";
 				function = "qup12";
 			};
 
-			qup_uart11_cts: qup-uart11-cts-pins {
+			qup_uart11_cts: qup-uart11-cts-state {
 				pins = "gpio44";
 				function = "qup13";
 			};
 
-			qup_uart11_rts: qup-uart11-rts-pins {
+			qup_uart11_rts: qup-uart11-rts-state {
 				pins = "gpio45";
 				function = "qup13";
 			};
 
-			qup_uart11_tx: qup-uart11-tx-pins {
+			qup_uart11_tx: qup-uart11-tx-state {
 				pins = "gpio46";
 				function = "qup13";
 			};
 
-			qup_uart11_rx: qup-uart11-rx-pins {
+			qup_uart11_rx: qup-uart11-rx-state {
 				pins = "gpio47";
 				function = "qup13";
 			};
 
-			qup_uart12_cts: qup-uart12-cts-pins {
+			qup_uart12_cts: qup-uart12-cts-state {
 				pins = "gpio48";
 				function = "qup14";
 			};
 
-			qup_uart12_rts: qup-uart12-rts-pins {
+			qup_uart12_rts: qup-uart12-rts-state {
 				pins = "gpio49";
 				function = "qup14";
 			};
 
-			qup_uart12_tx: qup-uart12-tx-pins {
+			qup_uart12_tx: qup-uart12-tx-state {
 				pins = "gpio50";
 				function = "qup14";
 			};
 
-			qup_uart12_rx: qup-uart12-rx-pins {
+			qup_uart12_rx: qup-uart12-rx-state {
 				pins = "gpio51";
 				function = "qup14";
 			};
 
-			qup_uart13_cts: qup-uart13-cts-pins {
+			qup_uart13_cts: qup-uart13-cts-state {
 				pins = "gpio52";
 				function = "qup15";
 			};
 
-			qup_uart13_rts: qup-uart13-rts-pins {
+			qup_uart13_rts: qup-uart13-rts-state {
 				pins = "gpio53";
 				function = "qup15";
 			};
 
-			qup_uart13_tx: qup-uart13-tx-pins {
+			qup_uart13_tx: qup-uart13-tx-state {
 				pins = "gpio54";
 				function = "qup15";
 			};
 
-			qup_uart13_rx: qup-uart13-rx-pins {
+			qup_uart13_rx: qup-uart13-rx-state {
 				pins = "gpio55";
 				function = "qup15";
 			};
 
-			qup_uart14_cts: qup-uart14-cts-pins {
+			qup_uart14_cts: qup-uart14-cts-state {
 				pins = "gpio56";
 				function = "qup16";
 			};
 
-			qup_uart14_rts: qup-uart14-rts-pins {
+			qup_uart14_rts: qup-uart14-rts-state {
 				pins = "gpio57";
 				function = "qup16";
 			};
 
-			qup_uart14_tx: qup-uart14-tx-pins {
+			qup_uart14_tx: qup-uart14-tx-state {
 				pins = "gpio58";
 				function = "qup16";
 			};
 
-			qup_uart14_rx: qup-uart14-rx-pins {
+			qup_uart14_rx: qup-uart14-rx-state {
 				pins = "gpio59";
 				function = "qup16";
 			};
 
-			qup_uart15_cts: qup-uart15-cts-pins {
+			qup_uart15_cts: qup-uart15-cts-state {
 				pins = "gpio60";
 				function = "qup17";
 			};
 
-			qup_uart15_rts: qup-uart15-rts-pins {
+			qup_uart15_rts: qup-uart15-rts-state {
 				pins = "gpio61";
 				function = "qup17";
 			};
 
-			qup_uart15_tx: qup-uart15-tx-pins {
+			qup_uart15_tx: qup-uart15-tx-state {
 				pins = "gpio62";
 				function = "qup17";
 			};
 
-			qup_uart15_rx: qup-uart15-rx-pins {
+			qup_uart15_rx: qup-uart15-rx-state {
 				pins = "gpio63";
 				function = "qup17";
 			};
 
-			sdc1_clk: sdc1-clk-pins {
+			sdc1_clk: sdc1-clk-state {
 				pins = "sdc1_clk";
 			};
 
-			sdc1_cmd: sdc1-cmd-pins {
+			sdc1_cmd: sdc1-cmd-state {
 				pins = "sdc1_cmd";
 			};
 
-			sdc1_data: sdc1-data-pins {
+			sdc1_data: sdc1-data-state {
 				pins = "sdc1_data";
 			};
 
-			sdc1_rclk: sdc1-rclk-pins {
+			sdc1_rclk: sdc1-rclk-state {
 				pins = "sdc1_rclk";
 			};
 
-			sdc1_clk_sleep: sdc1-clk-sleep-pins {
+			sdc1_clk_sleep: sdc1-clk-sleep-state {
 				pins = "sdc1_clk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_cmd_sleep: sdc1-cmd-sleep-pins {
+			sdc1_cmd_sleep: sdc1-cmd-sleep-state {
 				pins = "sdc1_cmd";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_data_sleep: sdc1-data-sleep-pins {
+			sdc1_data_sleep: sdc1-data-sleep-state {
 				pins = "sdc1_data";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_rclk_sleep: sdc1-rclk-sleep-pins {
+			sdc1_rclk_sleep: sdc1-rclk-sleep-state {
 				pins = "sdc1_rclk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_clk: sdc2-clk-pins {
+			sdc2_clk: sdc2-clk-state {
 				pins = "sdc2_clk";
 			};
 
-			sdc2_cmd: sdc2-cmd-pins {
+			sdc2_cmd: sdc2-cmd-state {
 				pins = "sdc2_cmd";
 			};
 
-			sdc2_data: sdc2-data-pins {
+			sdc2_data: sdc2-data-state {
 				pins = "sdc2_data";
 			};
 
-			sdc2_clk_sleep: sdc2-clk-sleep-pins {
+			sdc2_clk_sleep: sdc2-clk-sleep-state {
 				pins = "sdc2_clk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_cmd_sleep: sdc2-cmd-sleep-pins {
+			sdc2_cmd_sleep: sdc2-cmd-sleep-state {
 				pins = "sdc2_cmd";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_data_sleep: sdc2-data-sleep-pins {
+			sdc2_data_sleep: sdc2-data-sleep-state {
 				pins = "sdc2_data";
 				drive-strength = <2>;
 				bias-bus-hold;
@@ -5314,7 +5318,7 @@
 		};
 
 		epss_l3: interconnect@18590000 {
-			compatible = "qcom,sc7280-epss-l3";
+			compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3";
 			reg = <0 0x18590000 0 0x1000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
@@ -5322,7 +5326,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18591000 {
-			compatible = "qcom,cpufreq-epss";
+			compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0 0x18591000 0 0x1000>,
 			      <0 0x18592000 0 0x1000>,
 			      <0 0x18593000 0 0x1000>;
diff --git a/dts/src/arm64/qcom/sc8280xp-crd.dts b/dts/src/arm64/qcom/sc8280xp-crd.dts
index 5e30349efd..551768f977 100644
--- a/dts/src/arm64/qcom/sc8280xp-crd.dts
+++ b/dts/src/arm64/qcom/sc8280xp-crd.dts
@@ -37,7 +37,7 @@
 	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";
 
-		regulator-name = "VREG_EDP_BL";
+		regulator-name = "VBL9";
 		regulator-min-microvolt = <3600000>;
 		regulator-max-microvolt = <3600000>;
 
@@ -50,10 +50,24 @@
 		regulator-boot-on;
 	};
 
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
+
 	vreg_misc_3p3: regulator-misc-3p3 {
 		compatible = "regulator-fixed";
 
-		regulator-name = "VREG_MISC_3P3";
+		regulator-name = "VCC3B";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
@@ -66,6 +80,38 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
 };
 
 &apps_rsc {
@@ -124,9 +170,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13c: ldo13 {
@@ -149,9 +194,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4d: ldo4 {
@@ -184,6 +228,63 @@
 	};
 };
 
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
 &pmc8280c_lpg {
 	status = "okay";
 };
@@ -369,6 +470,13 @@
 	};
 };
 
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &pmc8280c_gpios {
 	edp_bl_pwm: edp-bl-pwm-state {
 		pins = "gpio8";
@@ -376,29 +484,112 @@
 	};
 };
 
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 
 	kybd_default: kybd-default-state {
-		disable {
+		disable-pins {
 			pins = "gpio102";
 			function = "gpio";
 			output-low;
 		};
 
-		int-n {
+		int-n-pins {
 			pins = "gpio104";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio105";
 			function = "gpio";
 			bias-disable;
 		};
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	qup0_i2c4_default: qup0-i2c4-default-state {
 		pins = "gpio171", "gpio172";
 		function = "qup4";
@@ -416,7 +607,7 @@
 	};
 
 	tpad_default: tpad-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio182";
 			function = "gpio";
 			bias-disable;
@@ -424,13 +615,13 @@
 	};
 
 	ts0_default: ts0-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio175";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset-n {
+		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
 			output-high;
diff --git a/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index b2b744bb8a..568c6be1ce 100644
--- a/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -7,6 +7,11 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc8280xp.dtsi"
@@ -26,6 +31,67 @@
 		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
 	};
 
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_int_n_default>;
+
+		switch-lid {
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
 	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";
 
@@ -58,6 +124,54 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
 };
 
 &apps_rsc {
@@ -95,7 +209,7 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-boot-on;
-			regulator-always-on;	// FIXME: VDD_A_EDP_0_0P9
+			regulator-always-on;	/* FIXME: VDD_A_EDP_0_0P9 */
 		};
 	};
 
@@ -145,6 +259,13 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l7d: ldo7 {
 			regulator-name = "vreg_l7d";
 			regulator-min-microvolt = <3072000>;
@@ -161,14 +282,221 @@
 	};
 };
 
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
 &pmc8280c_lpg {
 	status = "okay";
 };
 
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
 &pmk8280_pon_pwrkey {
 	status = "okay";
 };
 
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_vadc {
+	status = "okay";
+
+	pmic-die-temp@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	xo-therm@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	pmic-die-temp@103 {
+		reg = <PM8350_ADC7_DIE_TEMP(1)>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	sys-therm@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	pmic-die-temp@303 {
+		reg = <PM8350_ADC7_DIE_TEMP(3)>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	sys-therm@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	pmic-die-temp@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
 &qup0 {
 	status = "okay";
 };
@@ -339,6 +667,13 @@
 	};
 };
 
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &pmc8280c_gpios {
 	edp_bl_pwm: edp-bl-pwm-state {
 		pins = "gpio8";
@@ -346,29 +681,119 @@
 	};
 };
 
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio107";
+		function = "gpio";
+		input-enable;
+		bias-disable;
+	};
+
 	kybd_default: kybd-default-state {
-		disable {
+		disable-pins {
 			pins = "gpio102";
 			function = "gpio";
 			output-low;
 		};
 
-		int-n {
+		int-n-pins {
 			pins = "gpio104";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio105";
 			function = "gpio";
 			bias-disable;
 		};
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	qup0_i2c4_default: qup0-i2c4-default-state {
 		pins = "gpio171", "gpio172";
 		function = "qup4";
@@ -384,7 +809,7 @@
 	};
 
 	tpad_default: tpad-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio182";
 			function = "gpio";
 			bias-disable;
@@ -392,13 +817,13 @@
 	};
 
 	ts0_default: ts0-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio175";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset-n {
+		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
 			output-high;
diff --git a/dts/src/arm64/qcom/sc8280xp-pmics.dtsi b/dts/src/arm64/qcom/sc8280xp-pmics.dtsi
index 24836b6b9b..f2c0b71b5d 100644
--- a/dts/src/arm64/qcom/sc8280xp-pmics.dtsi
+++ b/dts/src/arm64/qcom/sc8280xp-pmics.dtsi
@@ -7,6 +7,50 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8280_1_thermal: pm8280-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pm8280_2_thermal: pm8280-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmk8280: pmic@0 {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
@@ -24,6 +68,32 @@
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
+
+			pmk8280_pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8280_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8280_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm5-gen2";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -33,6 +103,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8280_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280_1_gpios: gpio@8800 {
 			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
@@ -78,6 +155,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8280_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280_2_gpios: gpio@8800 {
 			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
diff --git a/dts/src/arm64/qcom/sc8280xp.dtsi b/dts/src/arm64/qcom/sc8280xp.dtsi
index 212d63d5cb..109c9d2b68 100644
--- a/dts/src/arm64/qcom/sc8280xp.dtsi
+++ b/dts/src/arm64/qcom/sc8280xp.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -38,66 +39,87 @@
 
 		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
 		};
 		opp-499200000 {
 			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
 		};
 		opp-595200000 {
 			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
 		};
 		opp-691200000 {
 			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(672000 * 32)>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
 		};
 		opp-902400000 {
 			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1017600000 {
 			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
 		};
 		opp-1209600000 {
 			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1267200 * 32)>;
 		};
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1363200 * 32)>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1536000 * 32)>;
 		};
 		opp-1670400000 {
 			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1612800 * 32)>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1881600000 {
 			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2112000000 {
 			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2227200000 {
 			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2342400000 {
 			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2438400000 {
 			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 	};
 
@@ -107,66 +129,87 @@
 
 		opp-825600000 {
 			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(768000 * 32)>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1171200000 {
 			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1286400000 {
 			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1267200 * 32)>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1363200 * 32)>;
 		};
 		opp-1516800000 {
 			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1459200 * 32)>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1612800 * 32)>;
 		};
 		opp-1747200000 {
 			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1862400000 {
 			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1977600000 {
 			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2169600000 {
 			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2284800000 {
 			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2496000000 {
 			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2592000000 {
 			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2688000000 {
 			opp-hz = /bits/ 64 <2688000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2803200000 {
 			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2899200000 {
 			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2995200000 {
 			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 	};
 
@@ -185,6 +228,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -206,6 +250,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -224,6 +269,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -242,6 +288,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -260,6 +307,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -278,6 +326,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -296,6 +345,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -314,6 +364,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -729,11 +780,11 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&pcie2a_phy>,
+				 <&pcie2b_phy>,
+				 <&pcie3a_phy>,
+				 <&pcie3b_phy>,
+				 <&pcie4_phy>,
 				 <0>,
 				 <0>;
 			power-domains = <&rpmhpd SC8280XP_CX>;
@@ -839,12 +890,505 @@
 			status = "disabled";
 		};
 
+		pcie4: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x30000000 0x0 0xf1d>,
+			      <0x0 0x30000f20 0x0 0xa8>,
+			      <0x0 0x30001000 0x0 0x1000>,
+			      <0x0 0x30100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x30200000 0x0 0x30200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <6>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE4_QX_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf",
+				      "cnoc_qx";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_4_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			phys = <&pcie4_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie4_phy: phy@1c06000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c06000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_CLKREF_CLK>,
+				 <&gcc GCC_PCIE4_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_4_PIPE_CLK>,
+				 <&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_4_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3b: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x32000000 0x0 0xf1d>,
+			      <0x0 0x32000f20 0x0 0xa8>,
+			      <0x0 0x32001000 0x0 0x1000>,
+			      <0x0 0x32100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x32200000 0x0 0x32200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			phys = <&pcie3b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3b_phy: phy@1c0e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3a: pcie@1c10000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c10000 0x0 0x3000>,
+			      <0x0 0x34000000 0x0 0xf1d>,
+			      <0x0 0x34000f20 0x0 0xa8>,
+			      <0x0 0x34001000 0x0 0x1000>,
+			      <0x0 0x34100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x34200000 0x0 0x34200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <4>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			phys = <&pcie3a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3a_phy: phy@1c14000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c14000 0x0 0x2000>,
+			      <0x0 0x01c16000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 1>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2b: pcie@1c18000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c18000 0x0 0x3000>,
+			      <0x0 0x38000000 0x0 0xf1d>,
+			      <0x0 0x38000f20 0x0 0xa8>,
+			      <0x0 0x38001000 0x0 0x1000>,
+			      <0x0 0x38100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x38200000 0x0 0x38200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			phys = <&pcie2b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2b_phy: phy@1c1e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c1e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2a: pcie@1c20000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c20000 0x0 0x3000>,
+			      <0x0 0x3c000000 0x0 0xf1d>,
+			      <0x0 0x3c000f20 0x0 0xa8>,
+			      <0x0 0x3c001000 0x0 0x1000>,
+			      <0x0 0x3c100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <2>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			phys = <&pcie2a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2a_phy: phy@1c24000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c24000 0x0 0x2000>,
+			      <0x0 0x01c26000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 0>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -855,12 +1399,13 @@
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_UFS_PHY_AHB_CLK>,
 				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
@@ -885,27 +1430,20 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
+			reg = <0 0x01d87000 0 0x1000>;
+
+			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ufs_card_hc: ufs@1da4000 {
@@ -913,7 +1451,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01da4000 0 0x3000>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_card_phy_lanes>;
+			phys = <&ufs_card_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -923,12 +1461,13 @@
 			power-domains = <&gcc UFS_CARD_GDSC>;
 
 			iommus = <&apps_smmu 0x4a0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_UFS_CARD_AHB_CLK>,
 				 <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
@@ -953,28 +1492,20 @@
 
 		ufs_card_phy: phy@1da7000 {
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01da7000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
+			reg = <0 0x01da7000 0 0x1000>;
+
+			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_CARD_GDSC>;
 
 			resets = <&ufs_card_hc 0>;
 			reset-names = "ufsphy";
 
-			status = "disabled";
+			#phy-cells = <0>;
 
-			ufs_card_phy_lanes: phy@1da7400 {
-				reg = <0 0x01da7400 0 0x108>,
-				      <0 0x01da7600 0 0x1e0>,
-				      <0 0x01da7c00 0 0x1dc>,
-				      <0 0x01da7800 0 0x108>,
-				      <0 0x01da7a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -983,6 +1514,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sc8280xp-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
 		usb_0_hsphy: phy@88e5000 {
 			compatible = "qcom,sc8280xp-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -1048,70 +1584,52 @@
 			status = "disabled";
 		};
 
-		usb_2_qmpphy0: phy-wrapper@88ef000 {
+		usb_2_qmpphy0: phy@88ef000 {
 			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088ef000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088ef000 0 0x2000>;
 
 			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
 
 			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
 				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy", "phy_phy";
 
 			power-domains = <&gcc USB30_MP_GDSC>;
 
-			status = "disabled";
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
 
-			usb_2_ssphy0: phy@88efe00 {
-				reg = <0 0x088efe00 0 0x160>,
-				      <0 0x088f0000 0 0x1ec>,
-				      <0 0x088ef200 0 0x1f0>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb2_phy0_pipe_clk";
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
-		usb_2_qmpphy1: phy-wrapper@88f1000 {
+		usb_2_qmpphy1: phy@88f1000 {
 			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088f1000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088f1000 0 0x2000>;
 
 			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
 
 			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
 				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy", "phy_phy";
 
 			power-domains = <&gcc USB30_MP_GDSC>;
 
-			status = "disabled";
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
 
-			usb_2_ssphy1: phy@88f1e00 {
-				reg = <0 0x088f1e00 0 0x160>,
-				      <0 0x088f2000 0 0x1ec>,
-				      <0 0x088f1200 0 0x1f0>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb2_phy1_pipe_clk";
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		remoteproc_adsp: remoteproc@3000000 {
@@ -1245,6 +1763,97 @@
 			};
 		};
 
+		pmu@9091000 {
+			compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x9091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <2597000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <3879000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <5161000>;
+				};
+				opp-7 {
+					opp-peak-kBps = <5931000>;
+				};
+				opp-8 {
+					opp-peak-kBps = <6515000>;
+				};
+				opp-9 {
+					opp-peak-kBps = <7980000>;
+				};
+				opp-10 {
+					opp-peak-kBps = <8136000>;
+				};
+				opp-11 {
+					opp-peak-kBps = <10437000>;
+				};
+				opp-12 {
+					opp-peak-kBps = <12191000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,msm8998-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <15258001>;
+				};
+			};
+		};
+
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8280xp-llcc";
 			reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
@@ -1456,6 +2065,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c440000 0 0x1100>,
@@ -1786,6 +2400,16 @@
 			};
 		};
 
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc8280xp-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@18591000 {
 			compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0 0x18591000 0 0x1000>,
diff --git a/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts b/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts
index 28050bc5f0..7c81918eee 100644
--- a/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts
+++ b/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts
@@ -99,7 +99,7 @@
 };
 
 &adsp_pil {
-	firmware-name = "qcom/ifc6560/adsp.mbn";
+	firmware-name = "qcom/sda660/adsp.mbn";
 };
 
 &blsp_i2c6 {
@@ -231,7 +231,7 @@
 };
 
 &rpm_requests {
-	pm660-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm660-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -313,7 +313,7 @@
 		};
 	};
 
-	pm660l-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm660l-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -401,16 +401,18 @@
 };
 
 &sdc2_state_on {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 };
 
 &sdc2_state_off {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
@@ -436,7 +438,7 @@
 
 	cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &tlmm {
diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
index 09c0780079..3d2b08d551 100644
--- a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
@@ -155,7 +155,7 @@
 };
 
 &adsp_pil {
-	firmware-name = "adsp.mdt";
+	firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
 };
 
 &blsp_i2c1 {
@@ -260,7 +260,7 @@
 };
 
 &rpm_requests {
-	pm660l-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm660l-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -394,7 +394,7 @@
 		};
 	};
 
-	pm660-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm660-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -577,16 +577,18 @@
 };
 
 &sdc2_state_on {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 };
 
 &sdc2_state_off {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
@@ -615,33 +617,35 @@
 &tlmm {
 	gpio-reserved-ranges = <8 4>;
 
-	ts_int_active: ts-int-active {
+	ts_int_active: ts-int-active-state {
 		pins = "gpio45";
+		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	ts_lcd_id_active: ts-lcd-id-active {
+	ts_lcd_id_active: ts-lcd-id-active-state {
 		pins = "gpio56";
+		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	imx300_vana_default: imx300-vana-default {
+	imx300_vana_default: imx300-vana-default-state {
 		pins = "gpio50";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	imx219_vana_default: imx219-vana-default {
+	imx219_vana_default: imx219-vana-default-state {
 		pins = "gpio51";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cam_vdig_default: cam-vdig-default {
+	cam_vdig_default: cam-vdig-default-state {
 		pins = "gpio52";
 		function = "gpio";
 		bias-disable;
diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi
index b51b85f583..13e6a4fbba 100644
--- a/dts/src/arm64/qcom/sdm630.dtsi
+++ b/dts/src/arm64/qcom/sdm630.dtsi
@@ -721,33 +721,36 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_uart1_default: blsp1-uart1-default {
+			blsp1_uart1_default: blsp1-uart1-default-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_uart1_sleep: blsp1-uart1-sleep {
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
+			blsp1_uart2_default: blsp1-uart2-default-state {
 				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_uart1_default: blsp2-uart1-active {
-				tx-rts {
+			blsp2_uart1_default: blsp2-uart1-active-state {
+				tx-rts-pins {
 					pins = "gpio16", "gpio19";
 					function = "blsp_uart5";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx {
+				rx-pins {
 					/*
 					 * Avoid garbage data while BT module
 					 * is powered off or not driving signal
@@ -758,7 +761,7 @@
 					bias-pull-up;
 				};
 
-				cts {
+				cts-pins {
 					/* Match the pull of the BT module */
 					pins = "gpio18";
 					function = "blsp_uart5";
@@ -767,244 +770,232 @@
 				};
 			};
 
-			blsp2_uart1_sleep: blsp2-uart1-sleep {
-				tx {
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+				tx-pins {
 					pins = "gpio16";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				rx-cts-rts {
+				rx-cts-rts-pins {
 					pins = "gpio17", "gpio18", "gpio19";
 					function = "gpio";
 					drive-strength = <2>;
-					bias-no-pull;
+					bias-disable;
 				};
 			};
 
-			i2c1_default: i2c1-default {
+			i2c1_default: i2c1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c1_sleep: i2c1-sleep {
+			i2c1_sleep: i2c1-sleep-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c2_default: i2c2-default {
+			i2c2_default: i2c2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c2_sleep: i2c2-sleep {
+			i2c2_sleep: i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c3_default: i2c3-default {
+			i2c3_default: i2c3-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c3_sleep: i2c3-sleep {
+			i2c3_sleep: i2c3-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c4_default: i2c4-default {
+			i2c4_default: i2c4-default-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c4_sleep: i2c4-sleep {
+			i2c4_sleep: i2c4-sleep-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c5_default: i2c5-default {
+			i2c5_default: i2c5-default-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c5_sleep: i2c5-sleep {
+			i2c5_sleep: i2c5-sleep-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c6_default: i2c6-default {
+			i2c6_default: i2c6-default-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c6_sleep: i2c6-sleep {
+			i2c6_sleep: i2c6-sleep-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c7_default: i2c7-default {
+			i2c7_default: i2c7-default-state {
 				pins = "gpio26", "gpio27";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c7_sleep: i2c7-sleep {
+			i2c7_sleep: i2c7-sleep-state {
 				pins = "gpio26", "gpio27";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c8_default: i2c8-default {
+			i2c8_default: i2c8-default-state {
 				pins = "gpio30", "gpio31";
-				function = "blsp_i2c8";
+				function = "blsp_i2c8_a";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c8_sleep: i2c8-sleep {
+			i2c8_sleep: i2c8-sleep-state {
 				pins = "gpio30", "gpio31";
-				function = "blsp_i2c8";
+				function = "blsp_i2c8_a";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			cci0_default: cci0_default {
-				pinmux {
-					pins = "gpio36","gpio37";
-					function = "cci_i2c";
-				};
-
-				pinconf {
-					pins = "gpio36","gpio37";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
+			cci0_default: cci0-default-state {
+				pins = "gpio36","gpio37";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
 			};
 
-			cci1_default: cci1_default {
-				pinmux {
-					pins = "gpio38","gpio39";
-					function = "cci_i2c";
-				};
-
-				pinconf {
-					pins = "gpio38","gpio39";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
+			cci1_default: cci1-default-state {
+				pins = "gpio38","gpio39";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
 			};
 
-			sdc1_state_on: sdc1-on {
-				clk {
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc1_state_off: sdc1-off {
-				clk {
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc2_state_on: sdc2-on {
-				clk {
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 			};
 
-			sdc2_state_off: sdc2-off {
-				clk {
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <2>;
@@ -1616,7 +1607,6 @@
 					      "core";
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -1639,7 +1629,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@c994400 {
+			dsi0_phy: phy@c994400 {
 				compatible = "qcom,dsi-phy-14nm-660";
 				reg = <0x0c994400 0x100>,
 				      <0x0c994500 0x300>,
@@ -2224,12 +2214,12 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					q6core {
+					service@3 {
 						reg = <APR_SVC_ADSP_CORE>;
 						compatible = "qcom,q6core";
 					};
 
-					q6afe: apr-service@4 {
+					q6afe: service@4 {
 						compatible = "qcom,q6afe";
 						reg = <APR_SVC_AFE>;
 						q6afedai: dais {
@@ -2240,7 +2230,7 @@
 						};
 					};
 
-					q6asm: apr-service@7 {
+					q6asm: service@7 {
 						compatible = "qcom,q6asm";
 						reg = <APR_SVC_ASM>;
 						q6asmdai: dais {
@@ -2252,7 +2242,7 @@
 						};
 					};
 
-					q6adm: apr-service@8 {
+					q6adm: service@8 {
 						compatible = "qcom,q6adm";
 						reg = <APR_SVC_ADM>;
 						q6routing: routing {
diff --git a/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts b/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts
index 891e314bc7..3fb513cad0 100644
--- a/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts
+++ b/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts
@@ -49,6 +49,20 @@
 	vdda-phy-dpdm-supply = <&pm8953_l13>;
 };
 
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "himax,hx83112b";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &pm8953_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -69,7 +83,7 @@
 };
 
 &rpm_requests {
-	pm8953-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8953-regulators";
 
 		vdd_l1-supply = <&pm8953_s3>;
diff --git a/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts
index 58f687fc49..9702e5f59a 100644
--- a/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts
+++ b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -19,7 +19,7 @@
 };
 
 &sdc2_state_on {
-	clk {
+	clk-pins {
 		drive-strength = <14>;
 	};
 };
diff --git a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts
index a3559f6e34..8fb2d17887 100644
--- a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts
+++ b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts
@@ -111,7 +111,7 @@
 };
 
 &rpm_requests {
-	pm660l-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm660l-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -206,7 +206,7 @@
 		};
 	};
 
-	pm660-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm660-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -372,16 +372,18 @@
 };
 
 &sdc2_state_on {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 };
 
 &sdc2_state_off {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
diff --git a/dts/src/arm64/qcom/sdm660.dtsi b/dts/src/arm64/qcom/sdm660.dtsi
index 43220af1b6..d52123cb5c 100644
--- a/dts/src/arm64/qcom/sdm660.dtsi
+++ b/dts/src/arm64/qcom/sdm660.dtsi
@@ -190,7 +190,6 @@
 					"core";
 
 		phys = <&dsi1_phy>;
-		phy-names = "dsi";
 
 		status = "disabled";
 
@@ -213,7 +212,7 @@
 		};
 	};
 
-	dsi1_phy: dsi-phy@c996400 {
+	dsi1_phy: phy@c996400 {
 		compatible = "qcom,dsi-phy-14nm-660";
 		reg = <0x0c996400 0x100>,
 				<0x0c996500 0x300>,
diff --git a/dts/src/arm64/qcom/sdm670-google-sargo.dts b/dts/src/arm64/qcom/sdm670-google-sargo.dts
new file mode 100644
index 0000000000..cf2ae540db
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm670-google-sargo.dts
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
+ * xiaomi-lavender device tree, and oneplus-common device tree.
+ *
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include "sdm670.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+
+/ {
+	model = "Google Pixel 3a";
+	compatible = "google,sargo", "qcom,sdm670";
+
+	aliases { };
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
+			width = <1080>;
+			height = <2220>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x9800000>;
+			no-map;
+		};
+
+		venus_mem: venus@94800000 {
+			reg = <0 0x94800000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@94d00000 {
+			reg = <0 0x94d00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@94e00000 {
+			reg = <0 0x94e00000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@95600000 {
+			reg = <0 0x95600000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@95800000 {
+			reg = <0 0x95800000 0 0x2200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@97a00000 {
+			reg = <0 0x97a00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@97a10000 {
+			reg = <0 0x97a10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@97a15000 {
+			reg = <0 0x97a15000 0 0x2000>;
+			no-map;
+		};
+
+		framebuffer-region@9c000000 {
+			reg = <0 0x9c000000 0 0x2400000>;
+			no-map;
+		};
+
+		/* Also includes ramoops regions */
+		debug_info_mem: debug-info@a1800000 {
+			reg = <0 0xa1800000 0 0x411000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * The touchscreen regulator seems to be controlled somehow by a gpio.
+	 * Model it as a fixed regulator and keep it on. Without schematics we
+	 * don't know how this is actually wired up...
+	 */
+	ts_1p8_supply: ts-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_1p8_supply";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3312000>;
+		regulator-max-microvolt = <3312000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * Supply map from xiaomi-lavender specifies this as the supply for
+	 * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
+	 * this as a power domain. Set this as a fixed regulator with the same
+	 * voltage as lavender until display is needed to avoid unneccessarily
+	 * using a deprecated binding (regulator-fixed-domain).
+	 */
+	vreg_s2b_1p05: vreg-s2b-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s2b";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm660-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
+		vdd-l2-l3-supply = <&vreg_s2b_1p05>;
+		vdd-l5-supply = <&vreg_s2b_1p05>;
+		vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
+		vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: smps4 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s6a_0p87: smps6 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-enable-ramp-delay = <150>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5a_0p848: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6a_1p3: ldo6 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7a_1p2: ldo7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8a_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l17a_1p8: ldo17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l19a_3p3: ldo19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm660l-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
+		vdd-l4-l6-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		/* LDOs */
+		vreg_l1b_0p925: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <900000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2b_2p95: ldo2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3b_3p0: ldo3 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l4b_2p95: ldo4 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5b_2p95: ldo5 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6b_3p3: ldo6 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7b_3p125: ldo7 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: ldo8 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		/*
+		 * Downstream specifies a fixed voltage of 3.312 V, but the
+		 * PMIC4 BOB ranges don't support that. Widen the range a
+		 * little to avoid adding a new BOB regulator type.
+		 */
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <500>;
+		};
+	};
+
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+
+		vio-supply = <&ts_1p8_supply>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <127>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&pm660l_gpios {
+	vol_up_pin: vol-up-state {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	supports-cqe;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-ddr-1_8v;
+
+	qcom,ddr-config = <0xc3040873>;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	touchscreen_default: ts-default-state {
+		ts-reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+
+		ts-irq-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		ts-switch-pins {
+			pins = "gpio135";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Only peripheral works for now */
+	dr_mode = "peripheral";
+
+	/* Do not assume that sdm670.dtsi will never support USB 3.0 */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+	maximum-speed = "high-speed";
+};
diff --git a/dts/src/arm64/qcom/sdm670.dtsi b/dts/src/arm64/qcom/sdm670.dtsi
new file mode 100644
index 0000000000..47363fde64
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm670.dtsi
@@ -0,0 +1,1160 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM670 SoC device tree source, adapted from SDM845 SoC device tree
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases { };
+
+	chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <1617>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <2380>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9825>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdm670", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-mem@85700000 {
+			reg = <0 0x85700000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl-mem@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		aop_mem: aop-mem@85fc0000 {
+			reg = <0 0x85fc0000 0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x85fe0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera-mem@8ab00000 {
+			reg = <0 0x8ab00000 0 0x500000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x7e00000>;
+			no-map;
+		};
+
+		venus_mem: venus@92e00000 {
+			reg = <0 0x92e00000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@93300000 {
+			reg = <0 0x93300000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@93400000 {
+			reg = <0 0x93400000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@93c00000 {
+			reg = <0 0x93c00000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@93e00000 {
+			reg = <0 0x93e00000 0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@95c00000 {
+			reg = <0 0x95c00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@95c10000 {
+			reg = <0 0x95c10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@95c15000 {
+			reg = <0 0x95c15000 0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: spss@97b00000 {
+			reg = <0 0x97b00000 0 0x100000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom@9e400000 {
+			reg = <0 0x9e400000 0 0x1400000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm670";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+			      <0 0x007c5000 0 0x1000>,
+			      <0 0x007c8000 0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
+			clock-names = "iface", "core", "xo", "ice", "bus";
+
+			iommus = <&apps_smmu 0x140 0xf>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			power-domains = <&rpmhpd SDM670_CX>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x6d6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x6c3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,sdm670-tlmm";
+			reg = <0 0x03400000 0 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio17", "gpio18";
+				function = "qup1";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup2";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup3";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio89", "gpio90";
+				function = "qup4";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio85", "gpio86";
+				function = "qup5";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup6";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio93", "gpio94";
+				function = "qup7";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio65", "gpio66";
+				function = "qup8";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup9";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup10";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio31", "gpio32";
+				function = "qup11";
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio49", "gpio50";
+				function = "qup12";
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio105", "gpio106";
+				function = "qup13";
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio33", "gpio34";
+				function = "qup14";
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio81", "gpio82";
+				function = "qup15";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sdm670-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x740 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apps_rsc: rsc@179c0000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x179c0000 0 0x10000>,
+			      <0 0x179d0000 0 0x10000>,
+			      <0 0x179e0000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm670-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdm670-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/sdm845-cheza.dtsi b/dts/src/arm64/qcom/sdm845-cheza.dtsi
index b5eb8f7eca..ca676e0468 100644
--- a/dts/src/arm64/qcom/sdm845-cheza.dtsi
+++ b/dts/src/arm64/qcom/sdm845-cheza.dtsi
@@ -16,7 +16,7 @@
 / {
 	aliases {
 		bluetooth0 = &bluetooth;
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 		serial0 = &uart9;
 		wifi0 = &wifi;
 	};
@@ -860,6 +860,8 @@ ap_ts_i2c: &i2c14 {
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth: wcn3990-bt {
 		compatible = "qcom,wcn3990-bt";
 		vddio-supply = <&src_pp1800_s4a>;
@@ -1079,41 +1081,6 @@ ap_ts_i2c: &i2c14 {
 	};
 };
 
-&qup_uart6_default {
-	/* Change pinmux to all 4 pins since CTS and RTS are connected */
-	pinmux {
-		pins = "gpio45", "gpio46",
-		       "gpio47", "gpio48";
-	};
-
-	pinconf-cts {
-		/*
-		 * Configure a pull-down on 45 (CTS) to match the pull of
-		 * the Bluetooth module.
-		 */
-		pins = "gpio45";
-		bias-pull-down;
-	};
-
-	pinconf-rts-tx {
-		/* We'll drive 46 (RTS) and 47 (TX), so no pull */
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pinconf-rx {
-		/*
-		 * Configure a pull-up on 48 (RX). This is needed to avoid
-		 * garbage data when the TX pin of the Bluetooth module is
-		 * in tri-state (module powered off or not driving the
-		 * signal yet).
-		 */
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
-
 &qup_uart9_default {
 	pinconf-tx {
 		pins = "gpio4";
@@ -1341,7 +1308,7 @@ ap_ts_i2c: &i2c14 {
 	};
 
 	pen_rst_l: pen-rst-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio23";
 			function = "gpio";
 		};
@@ -1408,7 +1375,7 @@ ap_ts_i2c: &i2c14 {
 	};
 
 	ts_int_l: ts-int-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio125";
 			function = "gpio";
 		};
@@ -1420,7 +1387,7 @@ ap_ts_i2c: &i2c14 {
 	};
 
 	ts_reset_l: ts-reset-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio118";
 			function = "gpio";
 		};
@@ -1436,7 +1403,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-low;
 		};
@@ -1446,7 +1413,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-high;
 		};
diff --git a/dts/src/arm64/qcom/sdm845-db845c-navigation-mezzanine.dts b/dts/src/arm64/qcom/sdm845-db845c-navigation-mezzanine.dts
new file mode 100644
index 0000000000..a21caa6f3f
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-db845c-navigation-mezzanine.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "sdm845-db845c.dts"
+
+&camss {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			csiphy0_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&ov8856_ep>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c0 {
+	camera@10 {
+		compatible = "ovti,ov8856";
+		reg = <0x10>;
+
+		/* CAM0_RST_N */
+		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		clock-names = "xvclk";
+		clock-frequency = <19200000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace is powered on as a,
+		 * so it is represented by a fixed regulator.
+		 *
+		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
+		 * both have to be enabled through the power management
+		 * gpios.
+		 */
+		dovdd-supply = <&vreg_lvs1a_1p8>;
+		avdd-supply = <&cam0_avdd_2v8>;
+		dvdd-supply = <&cam0_dvdd_1v2>;
+
+		port {
+			ov8856_ep: endpoint {
+				link-frequencies = /bits/ 64
+					<360000000 180000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
+
+&cci_i2c1 {
+	camera@60 {
+		compatible = "ovti,ov7251";
+
+		/* I2C address as per ov7251.txt linux documentation */
+		reg = <0x60>;
+
+		/* CAM3_RST_N */
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam3_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace always powered on.
+		 *
+		 * The 2.8V vdda-supply regulator is enabled when the
+		 * vreg_s4a_1p8 trace is pulled high.
+		 * It too is represented by a fixed regulator.
+		 *
+		 * No 1.2V vddd-supply regulator is used.
+		 */
+		vdddo-supply = <&vreg_lvs1a_1p8>;
+		vdda-supply = <&cam3_avdd_2v8>;
+
+		status = "disabled";
+
+		port {
+			ov7251_ep: endpoint {
+				data-lanes = <0 1>;
+/*				remote-endpoint = <&csiphy3_ep>; */
+			};
+		};
+	};
+};
diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts
index 132417e2d1..f41c6d600e 100644
--- a/dts/src/arm64/qcom/sdm845-db845c.dts
+++ b/dts/src/arm64/qcom/sdm845-db845c.dts
@@ -22,7 +22,7 @@
 
 	aliases {
 		serial0 = &uart9;
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 	};
 
 	chosen {
@@ -120,9 +120,11 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		// TODO: make it possible to drive same GPIO from two clients
-		// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		// enable-active-high;
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
 	};
 
 	pcie0_1p05v: pcie-0-1p05v-regulator {
@@ -133,9 +135,11 @@
 		regulator-min-microvolt = <1050000>;
 		regulator-max-microvolt = <1050000>;
 
-		// TODO: make it possible to drive same GPIO from two clients
-		// gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
-		// enable-active-high;
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
 	};
 
 	cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
@@ -195,9 +199,11 @@
 		regulator-min-microvolt = <500000>;
 		regulator-max-microvolt = <500000>;
 
-		// TODO: make it possible to drive same GPIO from two clients
-		// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		// enable-active-high;
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
 	};
 
 	vbat: vbat-regulator {
@@ -649,9 +655,13 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
 &q6afedai {
-	qi2s@22 {
+	dai@22 {
 		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <0 1 2 3>;
 	};
@@ -986,6 +996,8 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
@@ -1076,7 +1088,7 @@
 	status = "okay";
 };
 
-&wcd9340{
+&wcd9340 {
 	pinctrl-0 = <&wcd_intr_default>;
 	pinctrl-names = "default";
 	clock-names = "extclk";
@@ -1089,7 +1101,7 @@
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
 	swm: swm@c85 {
-		left_spkr: wsa8810-left{
+		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -1098,7 +1110,7 @@
 			#sound-dai-cells = <0>;
 		};
 
-		right_spkr: wsa8810-right{
+		right_spkr: speaker@0,2 {
 			compatible = "sdw10217201000";
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			reg = <0 2>;
@@ -1123,10 +1135,13 @@
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi2_default {
-	drive-strength = <16>;
+	pinconf {
+		pins = "gpio27", "gpio28", "gpio29", "gpio30";
+		drive-strength = <16>;
+	};
 };
 
-&qup_uart3_default{
+&qup_uart3_default {
 	pinmux {
 		pins = "gpio41", "gpio42", "gpio43", "gpio44";
 		function = "qup3";
@@ -1141,29 +1156,6 @@
 	};
 };
 
-&qup_uart6_default {
-	pinmux {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-disable;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
-
 &qup_uart9_default {
 	pinconf-tx {
 		pins = "gpio4";
@@ -1182,105 +1174,6 @@
 
 };
 
-&cci {
-	status = "okay";
-};
-
-&camss {
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-
-	status = "ok";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			csiphy0_ep: endpoint {
-				data-lanes = <0 1 2 3>;
-				remote-endpoint = <&ov8856_ep>;
-			};
-		};
-	};
-};
-
-&cci_i2c0 {
-	camera@10 {
-		compatible = "ovti,ov8856";
-		reg = <0x10>;
-
-		// CAM0_RST_N
-		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam0_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
-		clock-names = "xvclk";
-		clock-frequency = <19200000>;
-
-		/* The &vreg_s4a_1p8 trace is powered on as a,
-		 * so it is represented by a fixed regulator.
-		 *
-		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
-		 * both have to be enabled through the power management
-		 * gpios.
-		 */
-		dovdd-supply = <&vreg_lvs1a_1p8>;
-		avdd-supply = <&cam0_avdd_2v8>;
-		dvdd-supply = <&cam0_dvdd_1v2>;
-
-		status = "ok";
-
-		port {
-			ov8856_ep: endpoint {
-				link-frequencies = /bits/ 64
-					<360000000 180000000>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&csiphy0_ep>;
-			};
-		};
-	};
-};
-
-&cci_i2c1 {
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		// I2C address as per ov7251.txt linux documentation
-		reg = <0x60>;
-
-		// CAM3_RST_N
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/* The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disable";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-//				remote-endpoint = <&csiphy3_ep>;
-			};
-		};
-	};
-};
-
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi0_default {
 	config {
diff --git a/dts/src/arm64/qcom/sdm845-lg-common.dtsi b/dts/src/arm64/qcom/sdm845-lg-common.dtsi
index 20f275f869..1eb423e4be 100644
--- a/dts/src/arm64/qcom/sdm845-lg-common.dtsi
+++ b/dts/src/arm64/qcom/sdm845-lg-common.dtsi
@@ -604,7 +604,7 @@
 };
 
 &pm8998_gpio {
-	vol_up_pin_a: vol-up-active-pins {
+	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";
 		input-enable;
diff --git a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
index 392461c29e..42cf4dd5ea 100644
--- a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
+++ b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
@@ -19,7 +19,7 @@
 / {
 	aliases {
 		serial0 = &uart9;
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 	};
 
 	chosen {
@@ -50,7 +50,8 @@
 	};
 
 	reserved-memory {
-		/* The rmtfs_mem needs to be guarded due to "XPU limitations"
+		/*
+		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
 		 * it is otherwise possible for an allocation adjacent to the
 		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
 		 */
@@ -433,7 +434,7 @@
 	status = "okay";
 };
 
-/* Modem/wifi*/
+/* Modem/wifi */
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
@@ -461,6 +462,10 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -500,35 +505,11 @@
 	};
 };
 
-/*
- * Prevent garbage data on bluetooth UART lines
- */
-&qup_uart6_default {
-	pinmux {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-pull-down;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
-
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
diff --git a/dts/src/arm64/qcom/sdm845-samsung-starqltechn.dts b/dts/src/arm64/qcom/sdm845-samsung-starqltechn.dts
new file mode 100644
index 0000000000..e742c27fe9
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-samsung-starqltechn.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+
+/ {
+	chassis-type = "handset";
+	model = "Samsung Galaxy S9 SM-G9600";
+	compatible = "samsung,starqltechn", "qcom,sdm845";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		framebuffer: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x02400000>;
+			no-map;
+		};
+
+		memory@a1300000 {
+			compatible = "ramoops";
+			reg = <0x0 0xa1300000 0x0 0x100000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x40000>;
+		};
+	};
+};
+
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pm8005-rpmh-regulators {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Until we have Type C hooked up we'll force this as peripheral. */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+
+	sdc2_clk_state: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd_state: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data_state: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n_state: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
diff --git a/dts/src/arm64/qcom/sdm845-shift-axolotl.dts b/dts/src/arm64/qcom/sdm845-shift-axolotl.dts
index 83261c9bb4..bb77ccfdc6 100644
--- a/dts/src/arm64/qcom/sdm845-shift-axolotl.dts
+++ b/dts/src/arm64/qcom/sdm845-shift-axolotl.dts
@@ -23,6 +23,7 @@
 	aliases {
 		display0 = &framebuffer0;
 		serial0 = &uart9;
+		serial1 = &uart6;
 	};
 
 	chosen {
@@ -693,9 +694,17 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
+		/*
+		 * This path is relative to the qca/
+		 * subdir under lib/firmware.
+		 */
+		firmware-name = "axolotl/crnv21.bin";
+
 		vddio-supply = <&vreg_s4a_1p8>;
 		vddxo-supply = <&vreg_l7a_1p8>;
 		vddrf-supply = <&vreg_l17a_1p3>;
diff --git a/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi b/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi
index 51ee42e3c9..87dd0fc367 100644
--- a/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi
@@ -376,7 +376,7 @@
 	pinctrl-names = "default";
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &tlmm {
diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 0f470cf1ed..eb6b2b676e 100644
--- a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts
+++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -26,8 +26,6 @@
 /delete-node/ &rmtfs_mem;
 
 / {
-	model = "Xiaomi Pocophone F1";
-	compatible = "xiaomi,beryllium", "qcom,sdm845";
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
@@ -35,7 +33,7 @@
 	qcom,msm-id = <321 0x20001>;
 
 	aliases {
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 	};
 
 	gpio-keys {
@@ -221,8 +219,7 @@
 	status = "okay";
 	vdda-supply = <&vreg_l26a_1p2>;
 
-	panel@0 {
-		compatible = "tianma,fhd-video";
+	display_panel: panel@0 {
 		reg = <0>;
 		vddio-supply = <&vreg_l14a_1p8>;
 		vddpos-supply = <&lab>;
@@ -234,8 +231,10 @@
 		backlight = <&pmi8998_wled>;
 		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 
+		status = "disabled";
+
 		port {
-			tianma_nt36672a_in_0: endpoint {
+			panel_in_0: endpoint {
 				remote-endpoint = <&dsi0_out>;
 			};
 		};
@@ -243,7 +242,7 @@
 };
 
 &dsi0_out {
-	remote-endpoint = <&tianma_nt36672a_in_0>;
+	remote-endpoint = <&panel_in_0>;
 	data-lanes = <0 1 2 3>;
 };
 
@@ -336,9 +335,13 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
 &q6afedai {
-	qi2s@22 {
+	dai@22 {
 		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <0>;
 	};
@@ -481,6 +484,8 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
@@ -567,28 +572,3 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 };
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qup_uart6_default {
-	pinmux {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-disable;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-ebbg.dts
new file mode 100644
index 0000000000..76931ebad0
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (EBBG)";
+	compatible = "xiaomi,beryllium-ebbg", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "ebbg,ft8719";
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-tianma.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-tianma.dts
new file mode 100644
index 0000000000..8e176111e5
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (Tianma)";
+	compatible = "xiaomi,beryllium", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "tianma,fhd-video";
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-polaris.dts b/dts/src/arm64/qcom/sdm845-xiaomi-polaris.dts
index afc17e4d40..38ba809a95 100644
--- a/dts/src/arm64/qcom/sdm845-xiaomi-polaris.dts
+++ b/dts/src/arm64/qcom/sdm845-xiaomi-polaris.dts
@@ -456,9 +456,6 @@
 
 &i2c14 {
 	clock-frequency = <400000>;
-	dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
-		   <&gpi_dma1 1 6 QCOM_GPI_I2C>;
-	dma-names = "tx", "rx";
 	status = "okay";
 
 	touchscreen@20 {
@@ -544,8 +541,8 @@
 };
 
 &q6afedai {
-	qi2s@22 {
-		reg = <22>;
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <0>;
 	};
 };
@@ -628,7 +625,7 @@
 	};
 
 	wcd_intr_default: wcd-intr-default {
-		pins = "goui54";
+		pins = "gpio54";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
@@ -639,6 +636,8 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
@@ -735,28 +734,3 @@
 	qcom,snoc-host-cap-skip-quirk;
 	status = "okay";
 };
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qup_uart6_default {
-	pinmux {
-		 pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		 function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-disable;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi
index d761da4722..65032b94b4 100644
--- a/dts/src/arm64/qcom/sdm845.dtsi
+++ b/dts/src/arm64/qcom/sdm845.dtsi
@@ -767,13 +767,13 @@
 				#size-cells = <0>;
 				qcom,intents = <512 20>;
 
-				apr-service@3 {
+				service@3 {
 					reg = <APR_SVC_ADSP_CORE>;
 					compatible = "qcom,q6core";
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
 				};
 
-				q6afe: apr-service@4 {
+				q6afe: service@4 {
 					compatible = "qcom,q6afe";
 					reg = <APR_SVC_AFE>;
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -785,7 +785,7 @@
 					};
 				};
 
-				q6asm: apr-service@7 {
+				q6asm: service@7 {
 					compatible = "qcom,q6asm";
 					reg = <APR_SVC_ASM>;
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -798,7 +798,7 @@
 					};
 				};
 
-				q6adm: apr-service@8 {
+				q6adm: service@8 {
 					compatible = "qcom,q6adm";
 					reg = <APR_SVC_ADM>;
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -3008,6 +3008,28 @@
 				};
 			};
 
+			qup_uart6_4pin: qup-uart6-4pin-state {
+
+				cts-pins {
+					pins = "gpio45";
+					function = "qup6";
+					bias-pull-down;
+				};
+
+				rts-tx-pins {
+					pins = "gpio46", "gpio47";
+					function = "qup6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio48";
+					function = "qup6";
+					bias-pull-up;
+				};
+			};
+
 			qup_uart7_default: qup-uart7-default {
 				pinmux {
 					pins = "gpio95", "gpio96";
@@ -3823,33 +3845,29 @@
 			status = "disabled";
 		};
 
-		slim: slim@171c0000 {
+		slim: slim-ngd@171c0000 {
 			compatible = "qcom,slim-ngd-v2.1.0";
 			reg = <0 0x171c0000 0 0x2c000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 
-			qcom,apps-ch-pipes = <0x780000>;
-			qcom,ea-pc = <0x270>;
-			status = "okay";
-			dmas = <&slimbam 3>, <&slimbam 4>,
-				<&slimbam 5>, <&slimbam 6>;
-			dma-names = "rx", "tx", "tx2", "rx2";
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
 
 			iommus = <&apps_smmu 0x1806 0x0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ngd@1 {
+			slim@1 {
 				reg = <1>;
 				#address-cells = <2>;
 				#size-cells = <0>;
 
-				wcd9340_ifd: ifd@0{
+				wcd9340_ifd: ifd@0,0 {
 					compatible = "slim217,250";
 					reg = <0 0>;
 				};
 
-				wcd9340: codec@1{
+				wcd9340: codec@1,0 {
 					compatible = "slim217,250";
 					reg = <1 0>;
 					slim-ifc-dev = <&wcd9340_ifd>;
@@ -3959,9 +3977,10 @@
 		};
 
 		usb_1_qmpphy: phy@88e9000 {
-			compatible = "qcom,sdm845-qmp-usb3-phy";
+			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
 			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x10>;
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -3973,11 +3992,11 @@
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
+			usb_1_ssphy: usb3-phy@88e9200 {
 				reg = <0 0x088e9200 0 0x128>,
 				      <0 0x088e9400 0 0x200>,
 				      <0 0x088e9c00 0 0x218>,
@@ -3990,6 +4009,16 @@
 				clock-names = "pipe0";
 				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -4339,6 +4368,22 @@
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
 			};
 		};
 
@@ -4483,13 +4528,20 @@
 
 					port@0 {
 						reg = <0>;
-						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
 						dpu_intf2_out: endpoint {
 							remote-endpoint = <&dsi1_in>;
 						};
@@ -4521,6 +4573,77 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				status = "disabled";
+				compatible = "qcom,sdm845-dp";
+
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae90a00 0 0x600>,
+				      <0 0xae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface", "core_aux", "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				#clock-cells = <1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: dp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			dsi0: dsi@ae94000 {
 				compatible = "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -4548,7 +4671,6 @@
 				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -4574,7 +4696,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@ae94400 {
+			dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -4620,7 +4742,6 @@
 				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi1_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -4646,7 +4767,7 @@
 				};
 			};
 
-			dsi1_phy: dsi-phy@ae96400 {
+			dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -4812,8 +4933,8 @@
 				 <&dsi0_phy 1>,
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
-				 <0>,
-				 <0>;
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",
@@ -5197,7 +5318,7 @@
 		};
 
 		osm_l3: interconnect@17d41000 {
-			compatible = "qcom,sdm845-osm-l3";
+			compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
 			reg = <0 0x17d41000 0 0x1400>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
index be59a8ba9c..f32b7445f7 100644
--- a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
@@ -487,8 +487,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
@@ -783,7 +785,7 @@
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
 	swm: swm@c85 {
-		left_spkr: wsa8810-left{
+		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -792,7 +794,7 @@
 			#sound-dai-cells = <0>;
 		};
 
-		right_spkr: wsa8810-right{
+		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
 			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 			reg = <0 4>;
diff --git a/dts/src/arm64/qcom/sdm850-samsung-w737.dts b/dts/src/arm64/qcom/sdm850-samsung-w737.dts
index f954fe5cb6..daca1e0ad6 100644
--- a/dts/src/arm64/qcom/sdm850-samsung-w737.dts
+++ b/dts/src/arm64/qcom/sdm850-samsung-w737.dts
@@ -43,7 +43,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		// Firmware initialized the display at 1280p instead of 1440p
+		/* Firmware initialized the display at 1280p instead of 1440p */
 		framebuffer0: framebuffer@80400000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x80400000 0 (1920 * 1280 * 4)>;
@@ -124,7 +124,7 @@
 };
 
 &adsp_pas {
-	firmware-name = "qcom/samsung/w737/qcadsp850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qcadsp850.mbn";
 	status = "okay";
 };
 
@@ -336,7 +336,7 @@
 };
 
 &cdsp_pas {
-	firmware-name = "qcom/samsung/w737/qccdsp850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qccdsp850.mbn";
 	status = "okay";
 };
 
@@ -385,7 +385,7 @@
 &ipa {
 	status = "okay";
 	memory-region = <&ipa_fw_mem>;
-	firmware-name = "qcom/samsung/w737/ipa_fws.elf";
+	firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf";
 };
 
 /* No idea why it causes an SError when enabled */
@@ -395,7 +395,7 @@
 
 &mss_pil {
 	status = "okay";
-	firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qcdsp1v2850.mbn", "qcom/sdm850/samsung/w737/qcdsp2850.mbn";
 };
 
 &qup_i2c10_default {
@@ -415,8 +415,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
@@ -574,7 +576,7 @@
 	};
 
 	pen_rst_l: pen-rst-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio21";
 			function = "gpio";
 		};
@@ -696,7 +698,7 @@
 
 &venus {
 	status = "okay";
-	firmware-name = "qcom/samsung/w737/qcvss850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn";
 };
 
 &wcd9340{
@@ -715,7 +717,7 @@
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
 	swm: swm@c85 {
-		left_spkr: wsa8810-left{
+		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -724,7 +726,7 @@
 			#sound-dai-cells = <0>;
 		};
 
-		right_spkr: wsa8810-right{
+		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
 			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 			reg = <0 4>;
diff --git a/dts/src/arm64/qcom/sm4250-oneplus-billie2.dts b/dts/src/arm64/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 0000000000..a3f1c7c41f
--- /dev/null
+++ b/dts/src/arm64/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+};
+
+&reserved_memory {
+	bootloader_log_mem: memory@5fff7000 {
+		reg = <0x0 0x5fff7000 0x0 0x8000>;
+		no-map;
+	};
+
+	ramoops@cbe00000 {
+		compatible = "ramoops";
+		reg = <0x0 0xcbe00000 0x0 0x400000>;
+		record-size = <0x40000>;
+		pmsg-size = <0x200000>;
+		console-size = <0x40000>;
+		ftrace-size = <0x40000>;
+	};
+
+	param_mem: memory@cc200000 {
+		reg = <0x0 0xcc200000 0x0 0x100000>;
+		no-map;
+	};
+
+	mtp_mem: memory@cc300000 {
+		reg = <0x00 0xcc300000 0x00 0xb00000>;
+		no-map;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/dts/src/arm64/qcom/sm4250.dtsi b/dts/src/arm64/qcom/sm4250.dtsi
new file mode 100644
index 0000000000..c5add8f44f
--- /dev/null
+++ b/dts/src/arm64/qcom/sm4250.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include "sm6115.dtsi"
+
+&CPU0 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU5 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU6 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU7 {
+	compatible = "qcom,kryo240";
+};
diff --git a/dts/src/arm64/qcom/sm6115.dtsi b/dts/src/arm64/qcom/sm6115.dtsi
new file mode 100644
index 0000000000..572bf04adf
--- /dev/null
+++ b/dts/src/arm64/qcom/sm6115.dtsi
@@ -0,0 +1,1425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6115", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		cdsp_sec_mem: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@53800000 {
+			reg = <0x0 0x53800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@56100000 {
+			reg = <0x0 0x56100000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@56110000 {
+			reg = <0x0 0x56110000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@56115000 {
+			reg = <0x0 0x56115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: memory@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6115";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6115-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_min_svs: opp1 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp5 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp7 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_plus: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x00340000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6115-tlmm";
+			reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 121>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				sd-cd-pins {
+					pins = "gpio88";
+					function = "gpio";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				sd-cd-pins {
+					pins = "gpio88";
+					function = "gpio";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6115";
+			reg = <0x01400000 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@1613000 {
+			compatible = "qcom,sm6115-qusb2-phy";
+			reg = <0x01613000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b40000 {
+			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
+			reg = <0x01b40000 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		rng: rng@1b53000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x01b53000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4410000 {
+			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+			reg = <0x04411000 0x1ff>, /* TM */
+			      <0x04410000 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x045f0000 0x7000>;
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x04690000 0x10000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04784000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			bus-width = <4>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			iommus = <&apps_smmu 0x100 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x04807000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@4807400 {
+				reg = <0x4807400 0x098>,
+				      <0x4807600 0x130>,
+				      <0x4807c00 0x16c>;
+				#phy-cells = <0>;
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x04a00000 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels =  <10>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04ac0000 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
+			reg = <0x04ef8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x04e00000 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,sm6115-mdss";
+			reg = <0x05e00000 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,sm6115-dpu";
+				reg = <0x05e01000 0x8f000>,
+				      <0x05eb0000 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "rot",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			dsi0: dsi@5e94000 {
+				compatible = "qcom,dsi-ctrl-6g-qcm2290";
+				reg = <0x05e94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				phys = <&dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+			};
+
+			dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x05e94400 0x100>,
+				      <0x05e94500 0x300>,
+				      <0x05e94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6115-dispcc";
+			reg = <0x05f00000 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&dsi0_phy 0>,
+				 <&dsi0_phy 1>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0c600000 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0c800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6115-apcs-hmss-global";
+			reg = <0x0f111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0f120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@f123000 {
+				reg = <0x0f123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				reg = <0x0f124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				reg = <0x0f125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				reg = <0x0f126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				reg = <0x0f127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				reg = <0x0f128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>;
+
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts b/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 6a8b88cc43..0de6c5b7f7 100644
--- a/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -6,9 +6,10 @@
 /dts-v1/;
 
 #include "sm6125.dtsi"
+#include "pm6125.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 #include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	/* required for bootloader to select correct board */
@@ -80,15 +81,175 @@
 			no-map;
 		};
 	};
+
+	thermal-zones {
+		rf-pa0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <5000>;
+			thermal-sensors = <&pm6125_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rf-pa1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
 
 &hsusb_phy1 {
 	status = "okay";
 };
 
+&pm6125_adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
+
+	rf-pa0-therm@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	quiet-therm@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	camera-flash-therm@52 {
+		reg = <ADC5_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	emmc-ufs-therm@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	rf-pa1-therm@55 {
+		reg = <ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&pm6125_adc_tm {
+	status = "okay";
+
+	rf-pa0-therm@0 {
+		reg = <0>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	xo-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	rf-pa1-therm@3 {
+		reg = <3>;
+		io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6125_gpio {
+	camera_flash_therm: camera-flash-therm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	emmc_ufs_therm: emmc-ufs-therm-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	rf_pa1_therm: rf-pa1-therm-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEUP>;
+};
+
 &sdc2_off_state {
 	sd-cd-pins {
 		pins = "gpio98";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
@@ -97,6 +258,7 @@
 &sdc2_on_state {
 	sd-cd-pins {
 		pins = "gpio98";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
diff --git a/dts/src/arm64/qcom/sm6125.dtsi b/dts/src/arm64/qcom/sm6125.dtsi
index 1fe3fa3ad8..7e25a4f855 100644
--- a/dts/src/arm64/qcom/sm6125.dtsi
+++ b/dts/src/arm64/qcom/sm6125.dtsi
@@ -407,13 +407,13 @@
 			};
 
 			sdc2_on_state: sdc2-on-state {
-				clk {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				cmd-pins-pins {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -458,7 +458,7 @@
 		sdhc_1: mmc@4744000 {
 			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
-			reg-names = "hc", "core";
+			reg-names = "hc", "cqhci";
 
 			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
@@ -476,6 +476,8 @@
 
 			bus-width = <8>;
 			non-removable;
+			supports-cqe;
+
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts b/dts/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 36911b9a5c..94f77d3766 100644
--- a/dts/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/dts/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -4,7 +4,10 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm6350.dtsi"
+#include "pm6350.dtsi"
 
 / {
 	model = "Sony Xperia 10 III";
@@ -28,16 +31,348 @@
 			clocks = <&gcc GCC_DISP_AXI_CLK>;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_state>;
+
+		key-volume-down {
+			label = "volume_down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	touch_en_vreg: touch-en-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_en_vreg";
+		gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&pm6350_l6>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6350-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		pm6350_s1: smps1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_s2: smps2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <2048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l2: ldo2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l3: ldo3 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l4: ldo4 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l5: ldo5 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l6: ldo6 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l7: ldo7 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l8: ldo8 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l9: ldo9 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l11: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l12: ldo12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l13: ldo13 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l14: ldo14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l15: ldo15 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l16: ldo16 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <921000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l18: ldo18 {
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1049000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l19: ldo19 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l20: ldo20 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l21: ldo21 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <825000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l22: ldo22 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		pm6150l_s8: smps8 {
+			regulator-min-microvolt = <313000>;
+			regulator-max-microvolt = <1395000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l1: ldo1 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l2: ldo2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l3: ldo3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1299000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l4: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l5: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l6: ldo6 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+
+		};
+
+		pm6150l_l7: ldo7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l9: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+
+		};
+
+		pm6150l_l10: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l11: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_bob: bob {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <5492000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+		vdd-supply = <&pm6350_l11>;
+		avdd-supply = <&touch_en_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_active>;
+	};
+};
+
+&pm6350_gpios {
+	gpio_keys_state: gpio-keys-state {
+		key-volume-down-pins {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <0>;
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&pm6350_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &sdhc_2 {
 	status = "okay";
 
+	vmmc-supply = <&pm6150l_l9>;
+	vqmmc-supply = <&pm6150l_l6>;
+
 	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
 };
 
 &tlmm {
 	gpio-reserved-ranges = <13 4>, <45 2>, <56 2>;
+
+	ts_active: ts-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
 };
 
 &usb_1 {
diff --git a/dts/src/arm64/qcom/sm6350.dtsi b/dts/src/arm64/qcom/sm6350.dtsi
index c39de7d3ac..43324bf291 100644
--- a/dts/src/arm64/qcom/sm6350.dtsi
+++ b/dts/src/arm64/qcom/sm6350.dtsi
@@ -485,11 +485,13 @@
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x60 0x0>;
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			power-domains = <&rpmhpd SM6350_CX>;
@@ -1063,15 +1065,21 @@
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x560 0x0>;
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
 			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
 
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
 			power-domains = <&rpmhpd SM6350_CX>;
@@ -1148,15 +1156,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
@@ -1314,6 +1318,46 @@
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
 
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
 			qup_uart9_default: qup-uart9-default-state {
 				pins = "gpio25", "gpio26";
 				function = "qup13_f2";
diff --git a/dts/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts b/dts/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
new file mode 100644
index 0000000000..b691c3834b
--- /dev/null
+++ b/dts/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* PMK8350 is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
+#include <dt-bindings/gpio/gpio.h>
+#include "sm6375.dtsi"
+#include "pm6125.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/* PM6125 PON is used and we can't have duplicate labels */
+/delete-node/ &pmk8350_pon;
+
+/ {
+	model = "Sony Xperia 10 IV";
+	compatible = "sony,pdx225", "qcom,sm6375";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@85200000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x85200000 0 0xc00000>;
+
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet
+			 */
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@85200000 {
+			reg = <0 0x85200000 0 0xc00000>;
+			no-map;
+		};
+
+		ramoops@ffc40000 {
+			compatible = "ramoops";
+			reg = <0 0xffc40000 0 0xb0000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+
+		vdd-supply = <&pm6125_l13>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/Sony/murray/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/Sony/murray/cdsp.mbn";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s5: s5 {
+			regulator-min-microvolt = <382000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1374000>;
+		};
+
+		pm6125_s7: s7 {
+			regulator-min-microvolt = <1574000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		/*
+		 * S8 is VDD_GFX
+		 * L1 is VDD_LPI_CX
+		 */
+
+		pm6125_l2: l2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l7: l7 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		/* L17 is VDD_LPI_MX */
+
+		pm6125_l18: l18 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <920000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmr735a-regulators";
+
+		/*
+		 * S1 is VDD_MX
+		 * S2 is VDD_CX
+		 */
+
+		pmr735a_l1: l1 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+		};
+
+		pmr735a_l2: l2 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <796000>;
+		};
+
+		pmr735a_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: l4 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pmr735a_l5: l5 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		pmr735a_l6: l6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <868000>;
+		};
+
+		pmr735a_l7: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>;
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_avdd_default: ts-avdd-default-state {
+		pins = "gpio59";
+		function = "gpio";
+		drive-strength = <8>;
+		output-high;
+	};
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <19200000>;
+};
diff --git a/dts/src/arm64/qcom/sm6375.dtsi b/dts/src/arm64/qcom/sm6375.dtsi
new file mode 100644
index 0000000000..12cf5dbe5b
--- /dev/null
+++ b/dts/src/arm64/qcom/sm6375.dtsi
@@ -0,0 +1,1396 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-power-collapse";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sm6375", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hypervisor@80000000 {
+			reg = <0 0x80000000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0 0x80700000 0 0x100000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi: xbl-uefi-res@80880000 {
+			reg = <0 0x80880000 0 0x14000>;
+			no-map;
+		};
+
+		smem_mem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0 0x80900000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		fw_mem: fw@80b00000 {
+			reg = <0 0x80b00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 {
+			reg = <0 0x80c00000 0 0x1e00000>;
+			no-map;
+		};
+
+		dfps_data_mem: dpfs-data@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		pil_wlan_mem: pil-wlan@86500000 {
+			reg = <0 0x86500000 0 0x200000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@86700000 {
+			reg = <0 0x86700000 0 0x2000000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: pil-cdsp@88700000 {
+			reg = <0 0x88700000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@8a500000 {
+			reg = <0 0x8a500000 0 0x500000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: pil-ipa-fw@8aa00000 {
+			reg = <0 0x8aa00000 0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 {
+			reg = <0 0x8aa10000 0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 {
+			reg = <0 0x8aa1a000 0 0x2000>;
+			no-map;
+		};
+
+		pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 {
+			reg = <0 0x8b800000 0 0x10000000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0 0xc0000000 0 0x5100000>;
+			no-map;
+		};
+
+		debug_mem: debug@ffb00000 {
+			reg = <0 0xffb00000 0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0 0xffbc0000 0 0x80000>;
+			no-map;
+		};
+
+		cmdline_region: cmdline@ffd00000 {
+			reg = <0 0xffd00000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+		interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					     IPCC_MPROC_SIGNAL_GLINK_QMP
+					     IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6375";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+				clocks = <&xo_board_clk>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6375-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_ret: opp1 {
+						opp-level = <RPM_SMD_LEVEL_RETENTION>;
+					};
+
+					rpmpd_opp_min_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp5 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp7 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_no_cpr: opp9 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		ipcc: mailbox@208000 {
+			compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
+			reg = <0 0x00208000 0 0x1000>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6375-tlmm";
+			reg = <0 0x00500000 0 0x800000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 157>;
+			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			interrupt-controller;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio61", "gpio62";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio19", "gpio20";
+				/* TLMM, GCC and vendor DT all have different indices.. */
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup00";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,sm6375-gcc";
+			reg = <0 0x01400000 0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&sleep_clk>;
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@162b000 {
+			compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x0162b000 0 0x400>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x01c40000 0 0x1100>,
+			      <0 0x01e00000 0 0x2000000>,
+			      <0 0x03e00000 0 0x100000>,
+			      <0 0x03f00000 0 0xa0000>,
+			      <0 0x01c0a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0 0x045f0000 0 0x7000>;
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x04784000 0 0x1000>;
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04a00000 0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/*
+			 * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
+			 * There is a comment in the included DTSI of another SoC saying that they
+			 * are not "bolled out" (probably meaning not routed to solder balls)
+			 * TLMM driver however, suggests there are as many as 15 QUPs in total!
+			 * Most of which don't even have pin configurations for.. Sad stuff!
+			 */
+		};
+
+		gpi_dma1: dma-controller@4c00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04c00000 0 0x60000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xd6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@4cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04cc0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@4c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@4c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@4c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@4c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@4c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@4c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@4c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@4c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@4c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@4c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
+			reg = <0 0x04ef8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			/*
+			 * This property is there to allow USB2 to work, as
+			 * USB3 is not implemented yet - (re)move it when
+			 * proper support is in place.
+			 */
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x04e00000 0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				maximum-speed = "high-speed";
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0xe0 0x0>;
+
+				/* Yes, this impl *does* have an unfunny number of quirks.. */
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,is-utmi-l1-suspend;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,usb3_lpm_capable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@a400000 {
+			compatible = "qcom,sm6375-adsp-pas";
+			reg = <0 0x0a400000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
+					<&rpmpd SM6375_VDD_LPI_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b000000 {
+			compatible = "qcom,sm6375-cdsp-pas";
+			reg = <0x0 0x0b000000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
+			reg = <0 0x0c600000 0 0x100000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
+					<&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
+					<&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
+			      <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			redistributor-stride = <0 0x20000>;
+			interrupt-controller;
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x0f420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0x0f243000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0x0f425000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0x0f427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0x0f429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0x0f42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0x0f42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		cpufreq_hw: cpufreq@fd91000 {
+			compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts
index 30c94fd4fe..c456e9594e 100644
--- a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts
+++ b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts
@@ -279,8 +279,11 @@
 
 		vreg_l6e: ldo6 {
 			regulator-min-microvolt = <1700000>;
-			regulator-max-microvolt = <3544000>;
+			regulator-max-microvolt = <2950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7e: ldo7 {
@@ -297,8 +300,11 @@
 
 		vreg_l9e: ldo9 {
 			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3544000>;
+			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10e: ldo10 {
@@ -424,6 +430,33 @@
 	status = "okay";
 };
 
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9e>;
+	vqmmc-supply = <&vreg_l6e>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <13 4>, <56 2>;
 };
diff --git a/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts b/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts
index bb278ecac3..5397fba941 100644
--- a/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts
+++ b/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts
@@ -475,7 +475,7 @@
 &tlmm {
 	gpio-reserved-ranges = <126 4>;
 
-	da7280_intr_default: da7280-intr-default {
+	da7280_intr_default: da7280-intr-default-state {
 		pins = "gpio42";
 		function = "gpio";
 		bias-pull-up;
diff --git a/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi b/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi
index fb6e5a140c..c958a8b167 100644
--- a/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,9 +348,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
@@ -370,9 +369,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi
index cef8c4f4f0..a0c57fb798 100644
--- a/dts/src/arm64/qcom/sm8150.dtsi
+++ b/dts/src/arm64/qcom/sm8150.dtsi
@@ -887,7 +887,7 @@
 		};
 
 		gpi_dma0: dma-controller@800000 {
-			compatible = "qcom,sm8150-gpi-dma";
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x800000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1222,7 +1222,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8150-gpi-dma";
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0xa00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -1471,7 +1471,7 @@
 		};
 
 		gpi_dma2: dma-controller@c00000 {
-			compatible = "qcom,sm8150-gpi-dma";
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0xc00000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
@@ -2032,11 +2032,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2074,8 +2074,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 3>,
-					<&rpmhpd 2>;
+			power-domains = <&rpmhpd SM8150_LCX>,
+					<&rpmhpd SM8150_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
@@ -2276,422 +2276,302 @@
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
-			qup_i2c0_default: qup-i2c0-default {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "qup0";
-				};
-
-				config {
-					pins = "gpio0", "gpio1";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <0x02>;
+				bias-disable;
 			};
 
-			qup_spi0_default: qup-spi0-default {
+			qup_spi0_default: qup-spi0-default-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
 				function = "qup0";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c1_default: qup-i2c1-default {
-				mux {
-					pins = "gpio114", "gpio115";
-					function = "qup1";
-				};
-
-				config {
-					pins = "gpio114", "gpio115";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio114", "gpio115";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi1_default: qup-spi1-default {
+			qup_spi1_default: qup-spi1-default-state {
 				pins = "gpio114", "gpio115", "gpio116", "gpio117";
 				function = "qup1";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
-				mux {
-					pins = "gpio126", "gpio127";
-					function = "qup2";
-				};
-
-				config {
-					pins = "gpio126", "gpio127";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio126", "gpio127";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi2_default: qup-spi2-default {
+			qup_spi2_default: qup-spi2-default-state {
 				pins = "gpio126", "gpio127", "gpio128", "gpio129";
 				function = "qup2";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c3_default: qup-i2c3-default {
-				mux {
-					pins = "gpio144", "gpio145";
-					function = "qup3";
-				};
-
-				config {
-					pins = "gpio144", "gpio145";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio144", "gpio145";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi3_default: qup-spi3-default {
+			qup_spi3_default: qup-spi3-default-state {
 				pins = "gpio144", "gpio145", "gpio146", "gpio147";
 				function = "qup3";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c4_default: qup-i2c4-default {
-				mux {
-					pins = "gpio51", "gpio52";
-					function = "qup4";
-				};
-
-				config {
-					pins = "gpio51", "gpio52";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio51", "gpio52";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi4_default: qup-spi4-default {
+			qup_spi4_default: qup-spi4-default-state {
 				pins = "gpio51", "gpio52", "gpio53", "gpio54";
 				function = "qup4";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c5_default: qup-i2c5-default {
-				mux {
-					pins = "gpio121", "gpio122";
-					function = "qup5";
-				};
-
-				config {
-					pins = "gpio121", "gpio122";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio121", "gpio122";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi5_default: qup-spi5-default {
+			qup_spi5_default: qup-spi5-default-state {
 				pins = "gpio119", "gpio120", "gpio121", "gpio122";
 				function = "qup5";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
-				mux {
-					pins = "gpio6", "gpio7";
-					function = "qup6";
-				};
-
-				config {
-					pins = "gpio6", "gpio7";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi6_default: qup-spi6_default {
+			qup_spi6_default: qup-spi6_default-state {
 				pins = "gpio4", "gpio5", "gpio6", "gpio7";
 				function = "qup6";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
-				mux {
-					pins = "gpio98", "gpio99";
-					function = "qup7";
-				};
-
-				config {
-					pins = "gpio98", "gpio99";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio98", "gpio99";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi7_default: qup-spi7_default {
+			qup_spi7_default: qup-spi7_default-state {
 				pins = "gpio98", "gpio99", "gpio100", "gpio101";
 				function = "qup7";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
-				mux {
-					pins = "gpio88", "gpio89";
-					function = "qup8";
-				};
-
-				config {
-					pins = "gpio88", "gpio89";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio88", "gpio89";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi8_default: qup-spi8-default {
+			qup_spi8_default: qup-spi8-default-state {
 				pins = "gpio88", "gpio89", "gpio90", "gpio91";
 				function = "qup8";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c9_default: qup-i2c9-default {
-				mux {
-					pins = "gpio39", "gpio40";
-					function = "qup9";
-				};
-
-				config {
-					pins = "gpio39", "gpio40";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio39", "gpio40";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi9_default: qup-spi9-default {
+			qup_spi9_default: qup-spi9-default-state {
 				pins = "gpio39", "gpio40", "gpio41", "gpio42";
 				function = "qup9";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
-				mux {
-					pins = "gpio9", "gpio10";
-					function = "qup10";
-				};
-
-				config {
-					pins = "gpio9", "gpio10";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio9", "gpio10";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi10_default: qup-spi10-default {
+			qup_spi10_default: qup-spi10-default-state {
 				pins = "gpio9", "gpio10", "gpio11", "gpio12";
 				function = "qup10";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c11_default: qup-i2c11-default {
-				mux {
-					pins = "gpio94", "gpio95";
-					function = "qup11";
-				};
-
-				config {
-					pins = "gpio94", "gpio95";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio94", "gpio95";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi11_default: qup-spi11-default {
+			qup_spi11_default: qup-spi11-default-state {
 				pins = "gpio92", "gpio93", "gpio94", "gpio95";
 				function = "qup11";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c12_default: qup-i2c12-default {
-				mux {
-					pins = "gpio83", "gpio84";
-					function = "qup12";
-				};
-
-				config {
-					pins = "gpio83", "gpio84";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio83", "gpio84";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi12_default: qup-spi12-default {
+			qup_spi12_default: qup-spi12-default-state {
 				pins = "gpio83", "gpio84", "gpio85", "gpio86";
 				function = "qup12";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c13_default: qup-i2c13-default {
-				mux {
-					pins = "gpio43", "gpio44";
-					function = "qup13";
-				};
-
-				config {
-					pins = "gpio43", "gpio44";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio43", "gpio44";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi13_default: qup-spi13-default {
+			qup_spi13_default: qup-spi13-default-state {
 				pins = "gpio43", "gpio44", "gpio45", "gpio46";
 				function = "qup13";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c14_default: qup-i2c14-default {
-				mux {
-					pins = "gpio47", "gpio48";
-					function = "qup14";
-				};
-
-				config {
-					pins = "gpio47", "gpio48";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio47", "gpio48";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi14_default: qup-spi14-default {
+			qup_spi14_default: qup-spi14-default-state {
 				pins = "gpio47", "gpio48", "gpio49", "gpio50";
 				function = "qup14";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c15_default: qup-i2c15-default {
-				mux {
-					pins = "gpio27", "gpio28";
-					function = "qup15";
-				};
-
-				config {
-					pins = "gpio27", "gpio28";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi15_default: qup-spi15-default {
+			qup_spi15_default: qup-spi15-default-state {
 				pins = "gpio27", "gpio28", "gpio29", "gpio30";
 				function = "qup15";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c16_default: qup-i2c16-default {
-				mux {
-					pins = "gpio86", "gpio85";
-					function = "qup16";
-				};
-
-				config {
-					pins = "gpio86", "gpio85";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio86", "gpio85";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi16_default: qup-spi16-default {
+			qup_spi16_default: qup-spi16-default-state {
 				pins = "gpio83", "gpio84", "gpio85", "gpio86";
 				function = "qup16";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c17_default: qup-i2c17-default {
-				mux {
-					pins = "gpio55", "gpio56";
-					function = "qup17";
-				};
-
-				config {
-					pins = "gpio55", "gpio56";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi17_default: qup-spi17-default {
+			qup_spi17_default: qup-spi17-default-state {
 				pins = "gpio55", "gpio56", "gpio57", "gpio58";
 				function = "qup17";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c18_default: qup-i2c18-default {
-				mux {
-					pins = "gpio23", "gpio24";
-					function = "qup18";
-				};
-
-				config {
-					pins = "gpio23", "gpio24";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio23", "gpio24";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi18_default: qup-spi18-default {
+			qup_spi18_default: qup-spi18-default-state {
 				pins = "gpio23", "gpio24", "gpio25", "gpio26";
 				function = "qup18";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c19_default: qup-i2c19-default {
-				mux {
-					pins = "gpio57", "gpio58";
-					function = "qup19";
-				};
-
-				config {
-					pins = "gpio57", "gpio58";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio57", "gpio58";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi19_default: qup-spi19-default {
+			qup_spi19_default: qup-spi19-default-state {
 				pins = "gpio55", "gpio56", "gpio57", "gpio58";
 				function = "qup19";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			pcie0_default_state: pcie0-default {
-				perst {
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
 					pins = "gpio35";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio36";
 					function = "pci_e0";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio37";
 					function = "gpio";
 					drive-strength = <2>;
@@ -2699,22 +2579,22 @@
 				};
 			};
 
-			pcie1_default_state: pcie1-default {
-				perst {
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
 					pins = "gpio102";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio103";
 					function = "pci_e1";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio104";
 					function = "gpio";
 					drive-strength = <2>;
@@ -2739,8 +2619,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 7>,
-					<&rpmhpd 0>;
+			power-domains = <&rpmhpd SM8150_CX>,
+					<&rpmhpd SM8150_MSS>;
 			power-domain-names = "cx", "mss";
 
 			memory-region = <&mpss_mem>;
@@ -3366,7 +3246,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 7>;
+			power-domains = <&rpmhpd SM8150_CX>;
 
 			memory-region = <&cdsp_mem>;
 
@@ -3867,7 +3747,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 7>;
+			power-domains = <&rpmhpd SM8150_CX>;
 
 			memory-region = <&adsp_mem>;
 
@@ -4010,6 +3890,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8150-rpmh-clk";
@@ -4078,7 +3959,7 @@
 		};
 
 		osm_l3: interconnect@18321000 {
-			compatible = "qcom,sm8150-osm-l3";
+			compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3";
 			reg = <0 0x18321000 0 0x1400>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/dts/src/arm64/qcom/sm8250-mtp.dts b/dts/src/arm64/qcom/sm8250-mtp.dts
index a102aa5efa..3ed8c84e25 100644
--- a/dts/src/arm64/qcom/sm8250-mtp.dts
+++ b/dts/src/arm64/qcom/sm8250-mtp.dts
@@ -635,7 +635,7 @@
 	wcd938x: codec {
 		compatible = "qcom,wcd9380-codec";
 		#sound-dai-cells = <1>;
-		reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 		vdd-buck-supply = <&vreg_s4a_1p8>;
 		vdd-rxtx-supply = <&vreg_s4a_1p8>;
 		vdd-io-supply = <&vreg_s4a_1p8>;
@@ -757,7 +757,7 @@
 };
 
 &swr0 {
-	left_spkr: wsa8810-right@0,3{
+	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
 		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
@@ -766,7 +766,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	right_spkr: wsa8810-left@0,4{
+	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
 		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
@@ -799,31 +799,19 @@
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <40 4>;
 
-	wcd938x_reset_default: wcd938x_reset_default {
-		mux {
-			pins = "gpio32";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio32";
-			drive-strength = <16>;
-			output-high;
-		};
+	wcd938x_reset_default: wcd938x-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
 	};
 
-	wcd938x_reset_sleep: wcd938x_reset_sleep {
-		mux {
-			pins = "gpio32";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio32";
-			drive-strength = <16>;
-			bias-disable;
-			output-low;
-		};
+	wcd938x_reset_sleep: wcd938x-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
 	};
 };
 
diff --git a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi
index 5428aab305..09a31f7076 100644
--- a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,9 +317,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_2p85: ldo7 {
@@ -342,9 +341,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
@@ -440,7 +438,16 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	/* NXP PN553 NFC @ 28 */
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <111 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &i2c2 {
@@ -578,7 +585,7 @@
 	vqmmc-supply = <&vreg_l6c_2p9>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &slpi {
@@ -588,49 +595,49 @@
 &tlmm {
 	gpio-reserved-ranges = <40 4>, <52 4>;
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 	};
 
-	mdm2ap_default: mdm2ap-default {
+	mdm2ap_default: mdm2ap-default-state {
 		pins = "gpio1", "gpio3";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
-		bias-disabled;
+		bias-disable;
 		input-enable;
 	};
 
-	ap2mdm_default: ap2mdm-default {
+	ap2mdm_default: ap2mdm-default-state {
 		pins = "gpio56", "gpio57";
 		function = "gpio";
 		drive-strength = <16>;
 		bias-disable;
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-pull-up;
diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi
index e276eed1f8..dab5579946 100644
--- a/dts/src/arm64/qcom/sm8250.dtsi
+++ b/dts/src/arm64/qcom/sm8250.dtsi
@@ -937,7 +937,7 @@
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8250-gpi-dma";
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x00800000 0 0x70000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
@@ -1188,7 +1188,7 @@
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8250-gpi-dma";
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x00900000 0 0x70000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1506,7 +1506,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8250-gpi-dma";
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x00a00000 0 0x70000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -2180,11 +2180,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2361,7 +2361,6 @@
 			qcom,ports-word-length =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
 			qcom,ports-lane-control =	/bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
-			qcom,port-offset = <1>;
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2389,8 +2388,8 @@
 				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "core", "audio";
 
-			wsa_swr_active: wsa-swr-active-pins {
-				clk {
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
 					pins = "gpio10";
 					function = "wsa_swr_clk";
 					drive-strength = <2>;
@@ -2398,7 +2397,7 @@
 					bias-disable;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio11";
 					function = "wsa_swr_data";
 					drive-strength = <2>;
@@ -2408,8 +2407,8 @@
 				};
 			};
 
-			wsa_swr_sleep: wsa-swr-sleep-pins {
-				clk {
+			wsa_swr_sleep: wsa-swr-sleep-state {
+				clk-pins {
 					pins = "gpio10";
 					function = "wsa_swr_clk";
 					drive-strength = <2>;
@@ -2417,7 +2416,7 @@
 					bias-pull-down;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio11";
 					function = "wsa_swr_data";
 					drive-strength = <2>;
@@ -2427,14 +2426,14 @@
 				};
 			};
 
-			dmic01_active: dmic01-active-pins {
-				clk {
+			dmic01_active: dmic01-active-state {
+				clk-pins {
 					pins = "gpio6";
 					function = "dmic1_clk";
 					drive-strength = <8>;
 					output-high;
 				};
-				data {
+				data-pins {
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
@@ -2442,8 +2441,8 @@
 				};
 			};
 
-			dmic01_sleep: dmic01-sleep-pins {
-				clk {
+			dmic01_sleep: dmic01-sleep-state {
+				clk-pins {
 					pins = "gpio6";
 					function = "dmic1_clk";
 					drive-strength = <2>;
@@ -2451,17 +2450,17 @@
 					output-low;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <2>;
-					pull-down;
+					bias-pull-down;
 					input-enable;
 				};
 			};
 
-			rx_swr_active: rx_swr-active-pins {
-				clk {
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
 					pins = "gpio3";
 					function = "swr_rx_clk";
 					drive-strength = <2>;
@@ -2469,7 +2468,7 @@
 					bias-disable;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio4", "gpio5";
 					function = "swr_rx_data";
 					drive-strength = <2>;
@@ -2478,8 +2477,8 @@
 				};
 			};
 
-			tx_swr_active: tx_swr-active-pins {
-				clk {
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
 					pins = "gpio0";
 					function = "swr_tx_clk";
 					drive-strength = <2>;
@@ -2487,7 +2486,7 @@
 					bias-disable;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio1", "gpio2";
 					function = "swr_tx_data";
 					drive-strength = <2>;
@@ -2496,8 +2495,8 @@
 				};
 			};
 
-			tx_swr_sleep: tx_swr-sleep-pins {
-				clk {
+			tx_swr_sleep: tx-swr-sleep-state {
+				clk-pins {
 					pins = "gpio0";
 					function = "swr_tx_clk";
 					drive-strength = <2>;
@@ -2505,7 +2504,7 @@
 					bias-pull-down;
 				};
 
-				data1 {
+				data1-pins {
 					pins = "gpio1";
 					function = "swr_tx_data";
 					drive-strength = <2>;
@@ -2513,7 +2512,7 @@
 					bias-bus-hold;
 				};
 
-				data2 {
+				data2-pins {
 					pins = "gpio2";
 					function = "swr_tx_data";
 					drive-strength = <2>;
@@ -2730,6 +2729,503 @@
 			};
 		};
 
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>, <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_in0_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_in1_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel_in1_in_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_out_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_merg_out_funnel_swao: endpoint {
+					remote-endpoint = <&funnel_swao_in_funnel_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_merg_in_funnel_in0: endpoint {
+					remote-endpoint = <&funnel_in0_out_funnel_merg>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_merg_in_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_out_funnel_merg>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_cx_in_swao_out: endpoint {
+						remote-endpoint = <&replicator_swao_out_cx_in>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			arm,primecell-periphid = <0x000bb908>;
+
+			reg = <0 0x06b04000 0 0x1000>;
+			reg-names = "funnel-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_swao_out_etf: endpoint {
+						remote-endpoint = <&etf_in_funnel_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel_swao_in_funnel_merg: endpoint {
+						remote-endpoint= <&funnel_merg_out_funnel_swao>;
+					};
+				};
+			};
+
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in_funnel_swao_out: endpoint {
+						remote-endpoint = <&funnel_swao_out_etf>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_swao_out_cx_in: endpoint {
+						remote-endpoint = <&replicator_cx_in_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_in_funnel_apss>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port {
+					funnel_apss_merg_out_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_in_funnel_apss_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_apss_merg_in_funnel_apss: endpoint {
+					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
+					};
+				};
+			};
+		};
+
 		cdsp: remoteproc@8300000 {
 			compatible = "qcom,sm8250-cdsp-pas";
 			reg = <0 0x08300000 0 0x10000>;
@@ -2892,15 +3388,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
@@ -3416,6 +3908,35 @@
 					     "cam_hf_0_mnoc",
 					     "cam_sf_0_mnoc",
 					     "cam_sf_icp_mnoc";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+
+				port@5 {
+					reg = <5>;
+				};
+			};
 		};
 
 		camcc: clock-controller@ad00000 {
@@ -3556,7 +4077,6 @@
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -3601,7 +4121,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@ae94400 {
+			dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -3648,7 +4168,6 @@
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
 				phys = <&dsi1_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -3674,7 +4193,7 @@
 				};
 			};
 
-			dsi1_phy: dsi-phy@ae96400 {
+			dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -3799,8 +4318,41 @@
 			gpio-ranges = <&tlmm 0 0 181>;
 			wakeup-parent = <&pdc>;
 
-			cci0_default: cci0-default {
-				cci0_i2c0_default: cci0-i2c0-default {
+			cam2_default: cam2-default-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cam2_suspend: cam2-suspend-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
 					/* SDA, SCL */
 					pins = "gpio101", "gpio102";
 					function = "cci_i2c";
@@ -3809,7 +4361,7 @@
 					drive-strength = <2>; /* 2 mA */
 				};
 
-				cci0_i2c1_default: cci0-i2c1-default {
+				cci0_i2c1_default: cci0-i2c1-default-pins {
 					/* SDA, SCL */
 					pins = "gpio103", "gpio104";
 					function = "cci_i2c";
@@ -3819,8 +4371,8 @@
 				};
 			};
 
-			cci0_sleep: cci0-sleep {
-				cci0_i2c0_sleep: cci0-i2c0-sleep {
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio101", "gpio102";
 					function = "cci_i2c";
@@ -3829,7 +4381,7 @@
 					bias-pull-down;
 				};
 
-				cci0_i2c1_sleep: cci0-i2c1-sleep {
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio103", "gpio104";
 					function = "cci_i2c";
@@ -3839,8 +4391,8 @@
 				};
 			};
 
-			cci1_default: cci1-default {
-				cci1_i2c0_default: cci1-i2c0-default {
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
 					/* SDA, SCL */
 					pins = "gpio105","gpio106";
 					function = "cci_i2c";
@@ -3849,7 +4401,7 @@
 					drive-strength = <2>; /* 2 mA */
 				};
 
-				cci1_i2c1_default: cci1-i2c1-default {
+				cci1_i2c1_default: cci1-i2c1-default-pins {
 					/* SDA, SCL */
 					pins = "gpio107","gpio108";
 					function = "cci_i2c";
@@ -3859,8 +4411,8 @@
 				};
 			};
 
-			cci1_sleep: cci1-sleep {
-				cci1_i2c0_sleep: cci1-i2c0-sleep {
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio105","gpio106";
 					function = "cci_i2c";
@@ -3869,7 +4421,7 @@
 					drive-strength = <2>; /* 2 mA */
 				};
 
-				cci1_i2c1_sleep: cci1-i2c1-sleep {
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio107","gpio108";
 					function = "cci_i2c";
@@ -3879,22 +4431,22 @@
 				};
 			};
 
-			pri_mi2s_active: pri-mi2s-active {
-				sclk {
+			pri_mi2s_active: pri-mi2s-active-state {
+				sclk-pins {
 					pins = "gpio138";
 					function = "mi2s0_sck";
 					drive-strength = <8>;
 					bias-disable;
 				};
 
-				ws {
+				ws-pins {
 					pins = "gpio141";
 					function = "mi2s0_ws";
 					drive-strength = <8>;
 					output-high;
 				};
 
-				data0 {
+				data0-pins {
 					pins = "gpio139";
 					function = "mi2s0_data0";
 					drive-strength = <8>;
@@ -3902,7 +4454,7 @@
 					output-high;
 				};
 
-				data1 {
+				data1-pins {
 					pins = "gpio140";
 					function = "mi2s0_data1";
 					drive-strength = <8>;
@@ -3910,632 +4462,500 @@
 				};
 			};
 
-			qup_i2c0_default: qup-i2c0-default {
-				mux {
-					pins = "gpio28", "gpio29";
-					function = "qup0";
-				};
-
-				config {
-					pins = "gpio28", "gpio29";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c1_default: qup-i2c1-default {
-				pinmux {
-					pins = "gpio4", "gpio5";
-					function = "qup1";
-				};
-
-				config {
-					pins = "gpio4", "gpio5";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
-				mux {
-					pins = "gpio115", "gpio116";
-					function = "qup2";
-				};
-
-				config {
-					pins = "gpio115", "gpio116";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c3_default: qup-i2c3-default {
-				mux {
-					pins = "gpio119", "gpio120";
-					function = "qup3";
-				};
-
-				config {
-					pins = "gpio119", "gpio120";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio119", "gpio120";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c4_default: qup-i2c4-default {
-				mux {
-					pins = "gpio8", "gpio9";
-					function = "qup4";
-				};
-
-				config {
-					pins = "gpio8", "gpio9";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c5_default: qup-i2c5-default {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "qup5";
-				};
-
-				config {
-					pins = "gpio12", "gpio13";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
-				mux {
-					pins = "gpio16", "gpio17";
-					function = "qup6";
-				};
-
-				config {
-					pins = "gpio16", "gpio17";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio16", "gpio17";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "qup7";
-				};
-
-				config {
-					pins = "gpio20", "gpio21";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
-				mux {
-					pins = "gpio24", "gpio25";
-					function = "qup8";
-				};
-
-				config {
-					pins = "gpio24", "gpio25";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c9_default: qup-i2c9-default {
-				mux {
-					pins = "gpio125", "gpio126";
-					function = "qup9";
-				};
-
-				config {
-					pins = "gpio125", "gpio126";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio125", "gpio126";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
-				mux {
-					pins = "gpio129", "gpio130";
-					function = "qup10";
-				};
-
-				config {
-					pins = "gpio129", "gpio130";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio129", "gpio130";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c11_default: qup-i2c11-default {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "qup11";
-				};
-
-				config {
-					pins = "gpio60", "gpio61";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c12_default: qup-i2c12-default {
-				mux {
-					pins = "gpio32", "gpio33";
-					function = "qup12";
-				};
-
-				config {
-					pins = "gpio32", "gpio33";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c13_default: qup-i2c13-default {
-				mux {
-					pins = "gpio36", "gpio37";
-					function = "qup13";
-				};
-
-				config {
-					pins = "gpio36", "gpio37";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c14_default: qup-i2c14-default {
-				mux {
-					pins = "gpio40", "gpio41";
-					function = "qup14";
-				};
-
-				config {
-					pins = "gpio40", "gpio41";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c15_default: qup-i2c15-default {
-				mux {
-					pins = "gpio44", "gpio45";
-					function = "qup15";
-				};
-
-				config {
-					pins = "gpio44", "gpio45";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c16_default: qup-i2c16-default {
-				mux {
-					pins = "gpio48", "gpio49";
-					function = "qup16";
-				};
-
-				config {
-					pins = "gpio48", "gpio49";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c17_default: qup-i2c17-default {
-				mux {
-					pins = "gpio52", "gpio53";
-					function = "qup17";
-				};
-
-				config {
-					pins = "gpio52", "gpio53";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c18_default: qup-i2c18-default {
-				mux {
-					pins = "gpio56", "gpio57";
-					function = "qup18";
-				};
-
-				config {
-					pins = "gpio56", "gpio57";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c19_default: qup-i2c19-default {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "qup19";
-				};
-
-				config {
-					pins = "gpio0", "gpio1";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi0_cs: qup-spi0-cs {
+			qup_spi0_cs: qup-spi0-cs-state {
 				pins = "gpio31";
 				function = "qup0";
 			};
 
-			qup_spi0_cs_gpio: qup-spi0-cs-gpio {
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
 				pins = "gpio31";
 				function = "gpio";
 			};
 
-			qup_spi0_data_clk: qup-spi0-data-clk {
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
 				pins = "gpio28", "gpio29",
 				       "gpio30";
 				function = "qup0";
 			};
 
-			qup_spi1_cs: qup-spi1-cs {
+			qup_spi1_cs: qup-spi1-cs-state {
 				pins = "gpio7";
 				function = "qup1";
 			};
 
-			qup_spi1_cs_gpio: qup-spi1-cs-gpio {
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
 				pins = "gpio7";
 				function = "gpio";
 			};
 
-			qup_spi1_data_clk: qup-spi1-data-clk {
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
 				pins = "gpio4", "gpio5",
 				       "gpio6";
 				function = "qup1";
 			};
 
-			qup_spi2_cs: qup-spi2-cs {
+			qup_spi2_cs: qup-spi2-cs-state {
 				pins = "gpio118";
 				function = "qup2";
 			};
 
-			qup_spi2_cs_gpio: qup-spi2-cs-gpio {
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
 				pins = "gpio118";
 				function = "gpio";
 			};
 
-			qup_spi2_data_clk: qup-spi2-data-clk {
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
 				pins = "gpio115", "gpio116",
 				       "gpio117";
 				function = "qup2";
 			};
 
-			qup_spi3_cs: qup-spi3-cs {
+			qup_spi3_cs: qup-spi3-cs-state {
 				pins = "gpio122";
 				function = "qup3";
 			};
 
-			qup_spi3_cs_gpio: qup-spi3-cs-gpio {
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
 				pins = "gpio122";
 				function = "gpio";
 			};
 
-			qup_spi3_data_clk: qup-spi3-data-clk {
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
 				pins = "gpio119", "gpio120",
 				       "gpio121";
 				function = "qup3";
 			};
 
-			qup_spi4_cs: qup-spi4-cs {
+			qup_spi4_cs: qup-spi4-cs-state {
 				pins = "gpio11";
 				function = "qup4";
 			};
 
-			qup_spi4_cs_gpio: qup-spi4-cs-gpio {
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
 				pins = "gpio11";
 				function = "gpio";
 			};
 
-			qup_spi4_data_clk: qup-spi4-data-clk {
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
 				pins = "gpio8", "gpio9",
 				       "gpio10";
 				function = "qup4";
 			};
 
-			qup_spi5_cs: qup-spi5-cs {
+			qup_spi5_cs: qup-spi5-cs-state {
 				pins = "gpio15";
 				function = "qup5";
 			};
 
-			qup_spi5_cs_gpio: qup-spi5-cs-gpio {
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
 				pins = "gpio15";
 				function = "gpio";
 			};
 
-			qup_spi5_data_clk: qup-spi5-data-clk {
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
 				pins = "gpio12", "gpio13",
 				       "gpio14";
 				function = "qup5";
 			};
 
-			qup_spi6_cs: qup-spi6-cs {
+			qup_spi6_cs: qup-spi6-cs-state {
 				pins = "gpio19";
 				function = "qup6";
 			};
 
-			qup_spi6_cs_gpio: qup-spi6-cs-gpio {
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
 				pins = "gpio19";
 				function = "gpio";
 			};
 
-			qup_spi6_data_clk: qup-spi6-data-clk {
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
 				pins = "gpio16", "gpio17",
 				       "gpio18";
 				function = "qup6";
 			};
 
-			qup_spi7_cs: qup-spi7-cs {
+			qup_spi7_cs: qup-spi7-cs-state {
 				pins = "gpio23";
 				function = "qup7";
 			};
 
-			qup_spi7_cs_gpio: qup-spi7-cs-gpio {
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
 				pins = "gpio23";
 				function = "gpio";
 			};
 
-			qup_spi7_data_clk: qup-spi7-data-clk {
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
 				pins = "gpio20", "gpio21",
 				       "gpio22";
 				function = "qup7";
 			};
 
-			qup_spi8_cs: qup-spi8-cs {
+			qup_spi8_cs: qup-spi8-cs-state {
 				pins = "gpio27";
 				function = "qup8";
 			};
 
-			qup_spi8_cs_gpio: qup-spi8-cs-gpio {
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
 				pins = "gpio27";
 				function = "gpio";
 			};
 
-			qup_spi8_data_clk: qup-spi8-data-clk {
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
 				pins = "gpio24", "gpio25",
 				       "gpio26";
 				function = "qup8";
 			};
 
-			qup_spi9_cs: qup-spi9-cs {
+			qup_spi9_cs: qup-spi9-cs-state {
 				pins = "gpio128";
 				function = "qup9";
 			};
 
-			qup_spi9_cs_gpio: qup-spi9-cs-gpio {
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
 				pins = "gpio128";
 				function = "gpio";
 			};
 
-			qup_spi9_data_clk: qup-spi9-data-clk {
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
 				pins = "gpio125", "gpio126",
 				       "gpio127";
 				function = "qup9";
 			};
 
-			qup_spi10_cs: qup-spi10-cs {
+			qup_spi10_cs: qup-spi10-cs-state {
 				pins = "gpio132";
 				function = "qup10";
 			};
 
-			qup_spi10_cs_gpio: qup-spi10-cs-gpio {
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
 				pins = "gpio132";
 				function = "gpio";
 			};
 
-			qup_spi10_data_clk: qup-spi10-data-clk {
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
 				pins = "gpio129", "gpio130",
 				       "gpio131";
 				function = "qup10";
 			};
 
-			qup_spi11_cs: qup-spi11-cs {
+			qup_spi11_cs: qup-spi11-cs-state {
 				pins = "gpio63";
 				function = "qup11";
 			};
 
-			qup_spi11_cs_gpio: qup-spi11-cs-gpio {
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
 				pins = "gpio63";
 				function = "gpio";
 			};
 
-			qup_spi11_data_clk: qup-spi11-data-clk {
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
 				pins = "gpio60", "gpio61",
 				       "gpio62";
 				function = "qup11";
 			};
 
-			qup_spi12_cs: qup-spi12-cs {
+			qup_spi12_cs: qup-spi12-cs-state {
 				pins = "gpio35";
 				function = "qup12";
 			};
 
-			qup_spi12_cs_gpio: qup-spi12-cs-gpio {
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
 				pins = "gpio35";
 				function = "gpio";
 			};
 
-			qup_spi12_data_clk: qup-spi12-data-clk {
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
 				pins = "gpio32", "gpio33",
 				       "gpio34";
 				function = "qup12";
 			};
 
-			qup_spi13_cs: qup-spi13-cs {
+			qup_spi13_cs: qup-spi13-cs-state {
 				pins = "gpio39";
 				function = "qup13";
 			};
 
-			qup_spi13_cs_gpio: qup-spi13-cs-gpio {
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
 				pins = "gpio39";
 				function = "gpio";
 			};
 
-			qup_spi13_data_clk: qup-spi13-data-clk {
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
 				pins = "gpio36", "gpio37",
 				       "gpio38";
 				function = "qup13";
 			};
 
-			qup_spi14_cs: qup-spi14-cs {
+			qup_spi14_cs: qup-spi14-cs-state {
 				pins = "gpio43";
 				function = "qup14";
 			};
 
-			qup_spi14_cs_gpio: qup-spi14-cs-gpio {
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
 				pins = "gpio43";
 				function = "gpio";
 			};
 
-			qup_spi14_data_clk: qup-spi14-data-clk {
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
 				pins = "gpio40", "gpio41",
 				       "gpio42";
 				function = "qup14";
 			};
 
-			qup_spi15_cs: qup-spi15-cs {
+			qup_spi15_cs: qup-spi15-cs-state {
 				pins = "gpio47";
 				function = "qup15";
 			};
 
-			qup_spi15_cs_gpio: qup-spi15-cs-gpio {
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
 				pins = "gpio47";
 				function = "gpio";
 			};
 
-			qup_spi15_data_clk: qup-spi15-data-clk {
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
 				pins = "gpio44", "gpio45",
 				       "gpio46";
 				function = "qup15";
 			};
 
-			qup_spi16_cs: qup-spi16-cs {
+			qup_spi16_cs: qup-spi16-cs-state {
 				pins = "gpio51";
 				function = "qup16";
 			};
 
-			qup_spi16_cs_gpio: qup-spi16-cs-gpio {
+			qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
 				pins = "gpio51";
 				function = "gpio";
 			};
 
-			qup_spi16_data_clk: qup-spi16-data-clk {
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
 				pins = "gpio48", "gpio49",
 				       "gpio50";
 				function = "qup16";
 			};
 
-			qup_spi17_cs: qup-spi17-cs {
+			qup_spi17_cs: qup-spi17-cs-state {
 				pins = "gpio55";
 				function = "qup17";
 			};
 
-			qup_spi17_cs_gpio: qup-spi17-cs-gpio {
+			qup_spi17_cs_gpio: qup-spi17-cs-gpio-state {
 				pins = "gpio55";
 				function = "gpio";
 			};
 
-			qup_spi17_data_clk: qup-spi17-data-clk {
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
 				pins = "gpio52", "gpio53",
 				       "gpio54";
 				function = "qup17";
 			};
 
-			qup_spi18_cs: qup-spi18-cs {
+			qup_spi18_cs: qup-spi18-cs-state {
 				pins = "gpio59";
 				function = "qup18";
 			};
 
-			qup_spi18_cs_gpio: qup-spi18-cs-gpio {
+			qup_spi18_cs_gpio: qup-spi18-cs-gpio-state {
 				pins = "gpio59";
 				function = "gpio";
 			};
 
-			qup_spi18_data_clk: qup-spi18-data-clk {
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
 				pins = "gpio56", "gpio57",
 				       "gpio58";
 				function = "qup18";
 			};
 
-			qup_spi19_cs: qup-spi19-cs {
+			qup_spi19_cs: qup-spi19-cs-state {
 				pins = "gpio3";
 				function = "qup19";
 			};
 
-			qup_spi19_cs_gpio: qup-spi19-cs-gpio {
+			qup_spi19_cs_gpio: qup-spi19-cs-gpio-state {
 				pins = "gpio3";
 				function = "gpio";
 			};
 
-			qup_spi19_data_clk: qup-spi19-data-clk {
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
 				pins = "gpio0", "gpio1",
 				       "gpio2";
 				function = "qup19";
 			};
 
-			qup_uart2_default: qup-uart2-default {
-				mux {
-					pins = "gpio117", "gpio118";
-					function = "qup2";
-				};
+			qup_uart2_default: qup-uart2-default-state {
+				pins = "gpio117", "gpio118";
+				function = "qup2";
 			};
 
-			qup_uart6_default: qup-uart6-default {
-				mux {
-					pins = "gpio16", "gpio17",
-						"gpio18", "gpio19";
-					function = "qup6";
-				};
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "qup6";
 			};
 
-			qup_uart12_default: qup-uart12-default {
-				mux {
-					pins = "gpio34", "gpio35";
-					function = "qup12";
-				};
+			qup_uart12_default: qup-uart12-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup12";
 			};
 
-			qup_uart17_default: qup-uart17-default {
-				mux {
-					pins = "gpio52", "gpio53",
-						"gpio54", "gpio55";
-					function = "qup17";
-				};
+			qup_uart17_default: qup-uart17-default-state {
+				pins = "gpio52", "gpio53", "gpio54", "gpio55";
+				function = "qup17";
 			};
 
-			qup_uart18_default: qup-uart18-default {
-				mux {
-					pins = "gpio58", "gpio59";
-					function = "qup18";
-				};
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio58", "gpio59";
+				function = "qup18";
 			};
 
-			tert_mi2s_active: tert-mi2s-active {
-				sck {
+			tert_mi2s_active: tert-mi2s-active-state {
+				sck-pins {
 					pins = "gpio133";
 					function = "mi2s2_sck";
 					drive-strength = <8>;
 					bias-disable;
 				};
 
-				data0 {
+				data0-pins {
 					pins = "gpio134";
 					function = "mi2s2_data0";
 					drive-strength = <8>;
@@ -4543,7 +4963,7 @@
 					output-high;
 				};
 
-				ws {
+				ws-pins {
 					pins = "gpio135";
 					function = "mi2s2_ws";
 					drive-strength = <8>;
@@ -4551,42 +4971,42 @@
 				};
 			};
 
-			sdc2_sleep_state: sdc2-sleep {
-				clk {
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 			};
 
-			pcie0_default_state: pcie0-default {
-				perst {
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
 					pins = "gpio79";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio80";
 					function = "pci_e0";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio81";
 					function = "gpio";
 					drive-strength = <2>;
@@ -4594,22 +5014,22 @@
 				};
 			};
 
-			pcie1_default_state: pcie1-default {
-				perst {
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
 					pins = "gpio82";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio83";
 					function = "pci_e1";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio84";
 					function = "gpio";
 					drive-strength = <2>;
@@ -4617,22 +5037,22 @@
 				};
 			};
 
-			pcie2_default_state: pcie2-default {
-				perst {
+			pcie2_default_state: pcie2-default-state {
+				perst-pins {
 					pins = "gpio85";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio86";
 					function = "pci_e2";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio87";
 					function = "gpio";
 					drive-strength = <2>;
@@ -4791,13 +5211,13 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					apr-service@3 {
+					service@3 {
 						reg = <APR_SVC_ADSP_CORE>;
 						compatible = "qcom,q6core";
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
 					};
 
-					q6afe: apr-service@4 {
+					q6afe: service@4 {
 						compatible = "qcom,q6afe";
 						reg = <APR_SVC_AFE>;
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -4808,13 +5228,13 @@
 							#sound-dai-cells = <1>;
 						};
 
-						q6afecc: cc {
+						q6afecc: clock-controller {
 							compatible = "qcom,q6afe-clocks";
 							#clock-cells = <2>;
 						};
 					};
 
-					q6asm: apr-service@7 {
+					q6asm: service@7 {
 						compatible = "qcom,q6asm";
 						reg = <APR_SVC_ASM>;
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -4827,7 +5247,7 @@
 						};
 					};
 
-					q6adm: apr-service@8 {
+					q6adm: service@8 {
 						compatible = "qcom,q6adm";
 						reg = <APR_SVC_ADM>;
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -4956,6 +5376,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8250-rpmh-clk";
@@ -5020,7 +5441,7 @@
 		};
 
 		epss_l3: interconnect@18590000 {
-			compatible = "qcom,sm8250-epss-l3";
+			compatible = "qcom,sm8250-epss-l3", "qcom,epss-l3";
 			reg = <0 0x18590000 0 0x1000>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/dts/src/arm64/qcom/sm8350-hdk.dts b/dts/src/arm64/qcom/sm8350-hdk.dts
index 69ae6503c2..26a6081448 100644
--- a/dts/src/arm64/qcom/sm8350-hdk.dts
+++ b/dts/src/arm64/qcom/sm8350-hdk.dts
@@ -107,9 +107,8 @@
 			regulator-max-microvolt = <888000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
@@ -118,9 +117,8 @@
 			regulator-max-microvolt = <1208000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b_2p96: ldo7 {
@@ -129,9 +127,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b_1p2: ldo9 {
@@ -140,9 +137,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
-			     RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
diff --git a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
index d21bbeb603..c74c973a69 100644
--- a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
+++ b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -11,3 +11,209 @@
 	model = "Sony Xperia 1 III";
 	compatible = "sony,pdx215-generic", "qcom,sm8350";
 };
+
+&tlmm {
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "PM8008_1_RESET_N",
+			  "WLC_INT_N",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "CAM_MCLK4",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "TOF_RST_N",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN",
+			  "QLINK1_WMSS_RESET_N",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
diff --git a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi
index b3c9952ac1..1f2d660f8f 100644
--- a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
  */
 
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
 #include "pm8350.dtsi"
 #include "pm8350b.dtsi"
@@ -73,16 +74,366 @@
 			no-map;
 		};
 	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &adsp {
 	status = "okay";
-	firmware-name = "qcom/adsp.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s11>;
+
+		/*
+		 * ARC regulators:
+		 * S5 - mx.lvl
+		 * S6 - gfx.lvl
+		 * S9 - mxc.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		/* L8 - lcx.lvl (ARC) */
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&pm8350c_s1>;
+		vdd-l2-l8-supply = <&pm8350c_s1>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* S2 - ebi.lvl (ARC) */
+
+		pm8350c_s3: smps3 {
+			regulator-name = "pm8350c_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * ARC regulators:
+		 * S4 - mss.lvl
+		 * S6 - cx.lvl
+		 * S8 - mmcx.lvl
+		 */
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l11: ldo11 {
+			regulator-name = "pm8350c_l11";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+
+	/* TODO: Add pm8350b (just one ldo) once the driver part is in */
+
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <2208000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
 };
 
 &cdsp {
 	status = "okay";
-	firmware-name = "qcom/cdsp.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
 };
 
 &i2c1 {
@@ -175,12 +526,12 @@
 &ipa {
 	status = "okay";
 	memory-region = <&pil_ipa_fw_mem>;
-	firmware-name = "qcom/ipa_fws.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn";
 };
 
 &mpss {
 	status = "okay";
-	firmware-name = "qcom/modem.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
 };
 
 &pmk8350_rtc {
@@ -208,9 +559,21 @@
 	status = "okay";
 };
 
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
 &slpi {
 	status = "okay";
-	firmware-name = "qcom/slpi.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
 };
 
 &spi14 {
@@ -221,6 +584,209 @@
 
 &tlmm {
 	gpio-reserved-ranges = <44 4>;
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "NC",
+			  "NC",
+			  "PM8008_1_RESET_N",
+			  "NC",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
 
 	ts_int_default: ts-int-default-state {
 		pins = "gpio23";
@@ -229,31 +795,45 @@
 		bias-disable;
 		input-enable;
 	};
+
+	sdc2_card_det_active: sd-card-det-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_card_det_sleep: sd-card-det-sleep-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
 &ufs_mem_hc { status = "disabled"; };
 &ufs_mem_phy { status = "disabled"; };
 
-/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
 &usb_1 {
 	status = "okay";
-
-	qcom,select-utmi-as-pipe-clk;
 };
 
 &usb_1_dwc3 {
 	dr_mode = "peripheral";
-
-	maximum-speed = "high-speed";
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
 };
 
 &usb_1_hsphy {
 	status = "okay";
+
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
 };
 
 &usb_1_qmpphy {
 	status = "okay";
+
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
 };
diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi
index a86d9ea93b..245dce24ec 100644
--- a/dts/src/arm64/qcom/sm8350.dtsi
+++ b/dts/src/arm64/qcom/sm8350.dtsi
@@ -678,7 +678,7 @@
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
@@ -904,7 +904,7 @@
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x09800000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1209,7 +1209,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -1761,6 +1761,46 @@
 			gpio-ranges = <&tlmm 0 0 204>;
 			wakeup-parent = <&pdc>;
 
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			qup_uart3_default_state: qup-uart3-default-state {
 				rx-pins {
 					pins = "gpio18";
@@ -2004,6 +2044,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8350-rpmh-clk";
@@ -2142,11 +2183,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2221,7 +2262,7 @@
 
 		cdsp: remoteproc@98900000 {
 			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x098900000 0 0x1400000>;
+			reg = <0 0x98900000 0 0x1400000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2328,6 +2369,45 @@
 			};
 		};
 
+		sdhc_2: sdhci@8804000 {
+			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			power-domains = <&rpmhpd SM8350_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8350-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
diff --git a/dts/src/arm64/qcom/sm8450-hdk.dts b/dts/src/arm64/qcom/sm8450-hdk.dts
index 38ccd44620..4de3e1f1c3 100644
--- a/dts/src/arm64/qcom/sm8450-hdk.dts
+++ b/dts/src/arm64/qcom/sm8450-hdk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include "sm8450.dtsi"
 
 / {
@@ -394,8 +395,181 @@
 	status = "okay";
 };
 
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&soc {
+	wcd938x: codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <1>;
+
+		vdd-buck-supply = <&vreg_s10b_1p8>;
+		vdd-rxtx-supply = <&vreg_s10b_1p8>;
+		vdd-io-supply = <&vreg_s10b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+	};
+};
+
+&sound {
+	compatible = "qcom,sm8450-sndcard";
+	model = "SM8450-HDK";
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"TX DMIC0", "MIC BIAS1",
+			"TX DMIC1", "MIC BIAS2",
+			"TX DMIC2", "MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr0 {
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart7 {
@@ -442,3 +616,34 @@
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
 };
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s10b_1p8>;
+	qcom,dmic-sample-rate = <600000>;
+};
+
+&tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-default-state {
+		pins = "gpio43";
+		function = "gpio";
+		bias-disable;
+	};
+};
diff --git a/dts/src/arm64/qcom/sm8450-qrd.dts b/dts/src/arm64/qcom/sm8450-qrd.dts
index e58fc73997..ee62514fff 100644
--- a/dts/src/arm64/qcom/sm8450-qrd.dts
+++ b/dts/src/arm64/qcom/sm8450-qrd.dts
@@ -388,6 +388,18 @@
 	firmware-name = "qcom/sm8450/slpi.mbn";
 };
 
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
 &spi4 {
 	status = "okay";
 };
@@ -402,6 +414,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart7 {
diff --git a/dts/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/dts/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index d68765eb6d..b83500316a 100644
--- a/dts/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ b/dts/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -1,634 +1,227 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
  * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
  */
 
 /dts-v1/;
 
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sm8450.dtsi"
-
-/delete-node/ &adsp_mem;
-/delete-node/ &rmtfs_mem;
-/delete-node/ &video_mem;
+#include "sm8450-sony-xperia-nagara.dtsi"
 
 / {
 	model = "Sony Xperia 1 IV";
 	compatible = "sony,pdx223", "qcom,sm8450";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &uart7;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		adsp_mem: memory@85700000 {
-			reg = <0x0 0x85700000 0x0 0x2800000>;
-			no-map;
-		};
-
-		video_mem: memory@9fd00000 {
-			reg = <0x0 0x9fd00000 0x0 0x700000>;
-			no-map;
-		};
-
-		rmtfs_mem: memory@f3300000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0xf3300000 0x0 0x280000>;
-			no-map;
-
-			qcom,client-id = <1>;
-			qcom,vmid = <15>;
-		};
-
-		ramoops@ffc00000 {
-			compatible = "ramoops";
-			reg = <0 0xffc00000 0 0x200000>;
-			console-size = <0x40000>;
-			record-size = <0x1000>;
-			ecc-size = <16>;
-			no-map;
-		};
-	};
-
-	/* Sadly, the voltages for these GPIO regulators are unknown. */
-	imx650_vana_vreg: imx650-vana-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "imx650_vana_vreg";
-		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&apps_rsc {
-	pm8350-rpmh-regulators {
-		compatible = "qcom,pm8350-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-s9-supply = <&vph_pwr>;
-		vdd-s10-supply = <&vph_pwr>;
-		vdd-s11-supply = <&vph_pwr>;
-		vdd-s12-supply = <&vph_pwr>;
-
-		vdd-l1-l4-supply = <&pm8350_s11>;
-		vdd-l2-l7-supply = <&vreg_bob>;
-		vdd-l3-l5-supply = <&vreg_bob>;
-		vdd-l6-l9-l10-supply = <&pm8350_s12>;
-
-		/*
-		 * ARC regulators:
-		 * s5 - gfx.lvl
-		 * l8 - lcx.lvl
-		 */
-
-		pm8350_s10: smps10 {
-			regulator-name = "pm8350_s10";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8350_s11: smps11 {
-			regulator-name = "pm8350_s11";
-			regulator-min-microvolt = <848000>;
-			regulator-max-microvolt = <1104000>;
-		};
-
-		pm8350_s12: smps12 {
-			regulator-name = "pm8350_s12";
-			regulator-min-microvolt = <1224000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		pm8350_l1: ldo1 {
-			regulator-name = "pm8350_l1";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l2: ldo2 {
-			regulator-name = "pm8350_l2";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l3: ldo3 {
-			regulator-name = "pm8350_l3";
-			regulator-min-microvolt = <904000>;
-			regulator-max-microvolt = <904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l5: ldo5 {
-			regulator-name = "pm8350_l5";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l6: ldo6 {
-			regulator-name = "pm8350_l6";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l7: ldo7 {
-			regulator-name = "pm8350_l7";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l9: ldo9 {
-			regulator-name = "pm8350_l9";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	pm8350c-rpmh-regulators {
-		compatible = "qcom,pm8350c-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-s9-supply = <&vph_pwr>;
-		vdd-s10-supply = <&vph_pwr>;
-
-		vdd-l1-l12-supply = <&vreg_bob>;
-		vdd-l2-l8-supply = <&vreg_bob>;
-		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
-		vdd-l6-l9-l11-supply = <&vreg_bob>;
-		vdd-l10-supply = <&pm8350_s12>;
-
-		vdd-bob-supply = <&vph_pwr>;
-
-		/*
-		 * ARC regulators:
-		 * s2 - mxc.lvl
-		 * s4 - mss.lvl
-		 * s6 - cx.lvl
-		 */
-
-		pm8350c_s1: smps1 {
-			regulator-name = "pm8350c_s1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2024000>;
-		};
-
-		pm8350c_s10: smps10 {
-			regulator-name = "pm8350c_s10";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		vreg_bob: bob {
-			regulator-name = "vreg_bob";
-			regulator-min-microvolt = <3400000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		pm8350c_l1: ldo1 {
-			regulator-name = "pm8350c_l1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l2: ldo2 {
-			regulator-name = "pm8350c_l2";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l3: ldo3 {
-			regulator-name = "pm8350c_l3";
-			regulator-min-microvolt = <3296000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l4: ldo4 {
-			regulator-name = "pm8350c_l4";
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l5: ldo5 {
-			regulator-name = "pm8350c_l5";
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l6: ldo6 {
-			regulator-name = "pm8350c_l6";
-			regulator-min-microvolt = <2960000>;
-			/* Originally max = 3008000 but SDHCI expects 2960000 */
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l7: ldo7 {
-			regulator-name = "pm8350c_l7";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l8: ldo8 {
-			regulator-name = "pm8350c_l8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l9: ldo9 {
-			regulator-name = "pm8350c_l9";
-			regulator-min-microvolt = <2960000>;
-			/* Originally max = 3008000 but SDHCI expects 2960000 */
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l10: ldo10 {
-			regulator-name = "pm8350c_l10";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l12: ldo12 {
-			regulator-name = "pm8350c_l12";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1968000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l13: ldo13 {
-			regulator-name = "pm8350c_l13";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	pm8450-rpmh-regulators {
-		compatible = "qcom,pm8450-rpmh-regulators";
-		qcom,pmic-id = "h";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-
-		vdd-l2-supply = <&vreg_bob>;
-		vdd-l3-supply = <&vreg_bob>;
-		vdd-l4-supply = <&vreg_bob>;
-
-		/*
-		 * ARC regulators:
-		 * S2 - ebi.lvl
-		 * S4 - mmcx.lvl
-		 * S6 - mx.lvl
-		 * L1 - lmx.lvl
-		 */
-
-		pm8450_s3: smps3 {
-			regulator-name = "pm8450_s3";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <600000>;
-		};
-
-		pm8450_l2: ldo2 {
-			regulator-name = "pm8450_l2";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8450_l3: ldo3 {
-			regulator-name = "pm8450_l3";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	pmr735a-rpmh-regulators {
-		compatible = "qcom,pmr735a-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-
-		vdd-l1-l2-supply = <&pmr735a_s2>;
-		vdd-l3-supply = <&pmr735a_s1>;
-		vdd-l4-supply = <&pm8350c_s1>;
-		vdd-l5-l6-supply = <&pm8350c_s1>;
-		vdd-l7-bob-supply = <&vreg_bob>;
-
-		pmr735a_s1: smps1 {
-			regulator-name = "pmr735a_s1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1296000>;
-		};
-
-		pmr735a_s2: smps2 {
-			regulator-name = "pmr735a_s2";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1040000>;
-		};
-
-		pmr735a_s3: smps3 {
-			regulator-name = "pmr735a_s3";
-			regulator-min-microvolt = <435000>;
-			regulator-max-microvolt = <2352000>;
-		};
-
-		pmr735a_l1: ldo1 {
-			regulator-name = "pmr735a_l1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-		};
-
-		pmr735a_l2: ldo2 {
-			regulator-name = "pmr735a_l2";
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <912000>;
-		};
-
-		pmr735a_l3: ldo3 {
-			regulator-name = "pmr735a_l3";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pmr735a_l4: ldo4 {
-			regulator-name = "pmr735a_l4";
-			regulator-min-microvolt = <1776000>;
-			regulator-max-microvolt = <1776000>;
-		};
-
-		pmr735a_l5: ldo5 {
-			regulator-name = "pmr735a_l5";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-		};
-
-		pmr735a_l6: ldo6 {
-			regulator-name = "pmr735a_l6";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pmr735a_l7: ldo7 {
-			regulator-name = "pmr735a_l7";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-	};
-};
-
-&gpi_dma0 {
-	status = "okay";
-};
-
-&gpi_dma1 {
-	status = "okay";
-};
-
-&gpi_dma2 {
-	status = "okay";
-};
-
-/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */
-
-&i2c5 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* Dialog SLG51000 CMIC @ 75 */
-};
-
-&i2c9 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* NXP SN1X0 NFC @ 28 */
-};
-
-&i2c13 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* Richwave RTC6226 FM Radio Receiver @ 64 */
-};
-
-&i2c14 {
-	clock-frequency = <1000000>;
-	status = "okay";
-
-	cs35l41_l: speaker-amp@40 {
-		compatible = "cirrus,cs35l41";
-		reg = <0x40>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
-		cirrus,boost-peak-milliamp = <4000>;
-		cirrus,boost-ind-nanohenry = <1000>;
-		cirrus,boost-cap-microfarad = <15>;
-		cirrus,gpio2-src-select = <2>;
-		cirrus,gpio2-output-enable;
-		cirrus,asp-sdout-hiz = <3>;
-		#sound-dai-cells = <1>;
-	};
-
-	cs35l41_r: speaker-amp@41 {
-		compatible = "cirrus,cs35l41";
-		reg = <0x41>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
-		cirrus,boost-peak-milliamp = <4000>;
-		cirrus,boost-ind-nanohenry = <1000>;
-		cirrus,boost-cap-microfarad = <15>;
-		cirrus,gpio2-src-select = <2>;
-		cirrus,gpio2-output-enable;
-		cirrus,asp-sdout-hiz = <3>;
-		#sound-dai-cells = <1>;
-	};
-};
-
-&i2c15 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* AMS TCS3490 RGB+IR color sensor @ 72 */
-};
-
-&i2c19 {
-	clock-frequency = <1000000>;
-	status = "okay";
-
-	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
-};
-
-&pcie0 {
-	max-link-speed = <2>;
-	status = "okay";
-};
-
-&pcie0_phy {
-	vdda-phy-supply = <&pm8350_l5>;
-	vdda-pll-supply = <&pm8350_l6>;
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "qcom/adsp.mbn";
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "qcom/cdsp.mbn";
-	status = "okay";
-};
-
-&remoteproc_slpi {
-	firmware-name = "qcom/slpi.mbn";
-	status = "okay";
-};
-
-&qupv3_id_0 {
-	status = "okay";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&qupv3_id_2 {
-	status = "okay";
-};
-
-&sdhc_2 {
-	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
-	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
-	vmmc-supply = <&pm8350c_l9>;
-	vqmmc-supply = <&pm8350c_l6>;
-	/* Forbid SDR104/SDR50 - broken hw! */
-	sdhci-caps-mask = <0x3 0x0>;
-	no-sdio;
-	no-mmc;
-	status = "okay";
-};
-
-&spi10 {
-	status = "okay";
-
-	/* NXP SN1X0 NFC Secure Element @ 0 */
 };
 
 &tlmm {
-	gpio-reserved-ranges = <28 4>;
-
-	sdc2_default_state: sdc2-default-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "sdc2_cmd";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "sdc2_data";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
-	ts_int_default: ts-int-default-state {
-		pins = "gpio23";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		input-enable;
-	};
-
-	sdc2_card_det_n: sd-card-det-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-};
-
-&uart7 {
-	status = "okay";
-};
-
-&usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
-	vdda-pll-supply = <&pm8350_l5>;
-	vdda18-supply = <&pm8350c_l1>;
-	vdda33-supply = <&pm8350_l2>;
-	status = "okay";
-};
-
-&usb_1_qmpphy {
-	vdda-phy-supply = <&pm8350_l6>;
-	vdda-pll-supply = <&pm8350_l1>;
-	status = "okay";
+	gpio-line-names = "NC", /* GPIO_0 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "PM8010_2_RESET_N",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "NC",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "TOF_RST_N",
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN", /* GPIO_160 */
+			  "QLINK1_WMSS_RESET_N",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
 };
diff --git a/dts/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/dts/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts
new file mode 100644
index 0000000000..13c2fc4bcc
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450-sony-xperia-nagara.dtsi"
+
+/ {
+	model = "Sony Xperia 5 IV";
+	compatible = "sony,pdx224", "qcom,sm8450";
+
+	imx563_vdig_vreg: imx563-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx563_vdig_vreg";
+		gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
+			  "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */
+			  "TELE_SPI_CLK",
+			  "TELE_SPI_CS_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "UWIDEC_PWR_EN",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "NC", /* SONY didn't rename this, but there's no ToF so it's likely NC */
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC", /* GPIO_160 */
+			  "NC",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
+};
diff --git a/dts/src/arm64/qcom/sm8450-sony-xperia-nagara.dtsi b/dts/src/arm64/qcom/sm8450-sony-xperia-nagara.dtsi
new file mode 100644
index 0000000000..38256226d2
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		adsp_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: memory@9fd00000 {
+			reg = <0x0 0x9fd00000 0x0 0x700000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f3300000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf3300000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x200000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+
+	/* Sadly, the voltages for these GPIO regulators are unknown. */
+	imx650_vana_vreg: imx650-vana-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx650_vana_vreg";
+		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	pm8350-rpmh-regulators {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s12>;
+
+		/*
+		 * ARC regulators:
+		 * s5 - gfx.lvl
+		 * l8 - lcx.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-rpmh-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		/*
+		 * ARC regulators:
+		 * s2 - mxc.lvl
+		 * s4 - mss.lvl
+		 * s6 - cx.lvl
+		 */
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8450-rpmh-regulators {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		/*
+		 * ARC regulators:
+		 * S2 - ebi.lvl
+		 * S4 - mmcx.lvl
+		 * S6 - mx.lvl
+		 * L1 - lmx.lvl
+		 */
+
+		pm8450_s3: smps3 {
+			regulator-name = "pm8450_s3";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <600000>;
+		};
+
+		pm8450_l2: ldo2 {
+			regulator-name = "pm8450_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8450_l3: ldo3 {
+			regulator-name = "pm8450_l3";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pmr735a-rpmh-regulators {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <435000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <21 0x2008>;
+		vdd-supply = <&pm8350c_l2>;
+		avdd-supply = <&pm8350c_l3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset_default &ts_int_default>;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c14 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c19 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&pcie0 {
+	max-link-speed = <2>;
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-pll-supply = <&pm8350_l6>;
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8350/Sony/nagara/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8350/Sony/nagara/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	firmware-name = "qcom/sm8350/Sony/nagara/slpi.mbn";
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&spi10 {
+	status = "okay";
+
+	/* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>;
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sm8450.dtsi b/dts/src/arm64/qcom/sm8450.dtsi
index d32f08df74..570475040d 100644
--- a/dts/src/arm64/qcom/sm8450.dtsi
+++ b/dts/src/arm64/qcom/sm8450.dtsi
@@ -7,12 +7,15 @@
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
+#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -51,6 +54,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -70,6 +74,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -86,6 +91,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -102,6 +108,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -118,6 +125,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -134,6 +142,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -151,6 +160,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -167,6 +177,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -730,7 +741,7 @@
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
@@ -791,7 +802,6 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -831,7 +841,6 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -871,7 +880,6 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -911,7 +919,6 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -951,7 +958,6 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1004,7 +1010,6 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1044,7 +1049,6 @@
 				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1058,7 +1062,7 @@
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
@@ -1394,7 +1398,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0xa00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
@@ -2095,9 +2099,212 @@
 			};
 		};
 
+		wsa2macro: codec@31e0000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x031e0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		/* WSA2 */
+		swr4: soundwire-controller@31f0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x031f0000 0 0x2000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsa2macro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		rxmacro: codec@3200000 {
+			compatible = "qcom,sm8450-lpass-rx-macro";
+			reg = <0 0x3200000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x3210000 0 0x2000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		txmacro: codec@3220000 {
+			compatible = "qcom,sm8450-lpass-tx-macro";
+			reg = <0 0x3220000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		/* WSA */
+		swr0: soundwire-controller@3250000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x03250000 0 0x2000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr2: soundwire-controller@33b0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x33b0000 0 0x2000>;
+			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wake";
+
+			clocks = <&vamacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		vamacro: codec@33f0000 {
+			compatible = "qcom,sm8450-lpass-va-macro";
+			reg = <0 0x033f0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec", "npl";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
 		remoteproc_adsp: remoteproc@30000000 {
 			compatible = "qcom,sm8450-adsp-pas";
-			reg = <0 0x030000000 0 0x100>;
+			reg = <0 0x30000000 0 0x100>;
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2133,6 +2340,45 @@
 				label = "lpass";
 				qcom,remote-pid = <2>;
 
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -2163,7 +2409,7 @@
 
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8450-cdsp-pas";
-			reg = <0 0x032300000 0 0x1400000>;
+			reg = <0 0x32300000 0 0x1400000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2283,8 +2529,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 0>,
-					<&rpmhpd 12>;
+			power-domains = <&rpmhpd SM8450_CX>,
+					<&rpmhpd SM8450_MSS>;
 			power-domain-names = "cx", "mss";
 
 			memory-region = <&mpss_mem>;
@@ -2307,6 +2553,84 @@
 			};
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8450-cci";
+			reg = <0 0xac15000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8450-cci";
+			reg = <0 0xac16000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sm8450-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -2322,6 +2646,33 @@
 			status = "disabled";
 		};
 
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8450-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <0>, /* dsi0 */
+				 <0>,
+				 <0>, /* dsi1 */
+				 <0>,
+				 <0>, /* dp0 */
+				 <0>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd SM8450_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8450-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
@@ -2384,6 +2735,26 @@
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
 			sdc2_sleep_state: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";
@@ -2404,6 +2775,70 @@
 				};
 			};
 
+			cci0_default: cci0-default-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			pcie0_default_state: pcie0-default-state {
 				perst-pins {
 					pins = "gpio94";
@@ -2800,6 +3235,123 @@
 
 		};
 
+		lpass_tlmm: pinctrl@3440000{
+			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+			reg = <0 0x3440000 0x0 0x20000>,
+			      <0 0x34d0000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
@@ -2999,6 +3551,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
 					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -3075,6 +3628,7 @@
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		gem_noc: interconnect@19100000 {
@@ -3161,16 +3715,16 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
 
-		sdhc_2: sdhci@8804000 {
+		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
@@ -3192,6 +3746,9 @@
 			bus-width = <4>;
 			dma-coherent;
 
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0x0>;
+
 			status = "disabled";
 
 			sdhc2_opp_table: opp-table {
@@ -3274,6 +3831,9 @@
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal-zones {
 		aoss0-thermal {
 			polling-delay-passive = <0>;
diff --git a/dts/src/arm64/renesas/aistarvision-mipi-adapter-2.1.dtsi b/dts/src/arm64/renesas/aistarvision-mipi-adapter-2.1.dtsi
index 7ce986f0a0..7cb5c958ae 100644
--- a/dts/src/arm64/renesas/aistarvision-mipi-adapter-2.1.dtsi
+++ b/dts/src/arm64/renesas/aistarvision-mipi-adapter-2.1.dtsi
@@ -65,7 +65,6 @@
 	ov5645: ov5645@3c {
 		compatible = "ovti,ov5645";
 		reg = <0x3c>;
-		clock-names = "xclk";
 		clocks = <&osc25250_clk>;
 		clock-frequency = <24000000>;
 		vdddo-supply = <&ov5645_vdddo_1v8>;
diff --git a/dts/src/arm64/renesas/condor-common.dtsi b/dts/src/arm64/renesas/condor-common.dtsi
index dfbe35bf46..7c34d14dcd 100644
--- a/dts/src/arm64/renesas/condor-common.dtsi
+++ b/dts/src/arm64/renesas/condor-common.dtsi
@@ -21,6 +21,7 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 	};
 
 	d1_8v: regulator-2 {
diff --git a/dts/src/arm64/renesas/draak-ebisu-panel-aa104xd12.dts b/dts/src/arm64/renesas/draak-ebisu-panel-aa104xd12.dtso
index 258f8668ca..258f8668ca 100644
--- a/dts/src/arm64/renesas/draak-ebisu-panel-aa104xd12.dts
+++ b/dts/src/arm64/renesas/draak-ebisu-panel-aa104xd12.dtso
diff --git a/dts/src/arm64/renesas/r8a779a0.dtsi b/dts/src/arm64/renesas/r8a779a0.dtsi
index ed9400f903..41fbb9998c 100644
--- a/dts/src/arm64/renesas/r8a779a0.dtsi
+++ b/dts/src/arm64/renesas/r8a779a0.dtsi
@@ -656,7 +656,7 @@
 
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6800000 0 0x800>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
@@ -704,7 +704,7 @@
 
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6810000 0 0x800>;
 			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
@@ -752,7 +752,7 @@
 
 		avb2: ethernet@e6820000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6820000 0 0x1000>;
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
@@ -800,7 +800,7 @@
 
 		avb3: ethernet@e6830000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6830000 0 0x1000>;
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
@@ -848,7 +848,7 @@
 
 		avb4: ethernet@e6840000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6840000 0 0x1000>;
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
@@ -896,7 +896,7 @@
 
 		avb5: ethernet@e6850000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6850000 0 0x1000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
@@ -1019,7 +1019,7 @@
 
 		msiof0: spi@e6e90000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6e90000 0 0x0064>;
 			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 618>;
@@ -1034,7 +1034,7 @@
 
 		msiof1: spi@e6ea0000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 619>;
@@ -1049,7 +1049,7 @@
 
 		msiof2: spi@e6c00000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c00000 0 0x0064>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 620>;
@@ -1064,7 +1064,7 @@
 
 		msiof3: spi@e6c10000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c10000 0 0x0064>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
@@ -1079,7 +1079,7 @@
 
 		msiof4: spi@e6c20000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c20000 0 0x0064>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
@@ -1094,7 +1094,7 @@
 
 		msiof5: spi@e6c28000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c28000 0 0x0064>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
diff --git a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
index a45df10417..045d705355 100644
--- a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
+++ b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
@@ -12,13 +12,13 @@
 	compatible = "renesas,spider-cpu", "renesas,r8a779f0";
 
 	aliases {
-		serial0 = &scif3;
+		serial0 = &hscif0;
 		serial1 = &scif0;
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
+		stdout-path = "serial0:1843200n8";
 	};
 
 	memory@48000000 {
@@ -59,6 +59,14 @@
 	clock-frequency = <32768>;
 };
 
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &i2c4 {
 	pinctrl-0 = <&i2c4_pins>;
 	pinctrl-names = "default";
@@ -99,6 +107,11 @@
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
 	i2c4_pins: i2c4 {
 		groups = "i2c4";
 		function = "i2c4";
@@ -115,11 +128,6 @@
 		function = "scif0";
 	};
 
-	scif3_pins: scif3 {
-		groups = "scif3_data", "scif3_ctrl";
-		function = "scif3";
-	};
-
 	scif_clk_pins: scif_clk {
 		groups = "scif_clk";
 		function = "scif_clk";
@@ -139,14 +147,6 @@
 	status = "okay";
 };
 
-&scif3 {
-	pinctrl-0 = <&scif3_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
 &scif_clk {
 	clock-frequency = <24000000>;
 };
diff --git a/dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi b/dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi
index 15e8d1ebf5..33c1015e9a 100644
--- a/dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi
+++ b/dts/src/arm64/renesas/r8a779f0-spider-ethernet.dtsi
@@ -5,6 +5,10 @@
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
 
+&eth_serdes {
+	status = "okay";
+};
+
 &i2c4 {
 	eeprom@52 {
 		compatible = "rohm,br24g01", "atmel,24c01";
@@ -13,3 +17,89 @@
 		pagesize = <8>;
 	};
 };
+
+&pfc {
+	tsn0_pins: tsn0 {
+		groups = "tsn0_mdio_b", "tsn0_link_b";
+		function = "tsn0";
+		power-source = <1800>;
+	};
+
+	tsn1_pins: tsn1 {
+		groups = "tsn1_mdio_b", "tsn1_link_b";
+		function = "tsn1";
+		power-source = <1800>;
+	};
+
+	tsn2_pins: tsn2 {
+		groups = "tsn2_mdio_b", "tsn2_link_b";
+		function = "tsn2";
+		power-source = <1800>;
+	};
+};
+
+&rswitch {
+	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-handle = <&u101>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u101: ethernet-phy@1 {
+					reg = <1>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@1 {
+			reg = <1>;
+			phy-handle = <&u201>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u201: ethernet-phy@2 {
+					reg = <2>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@2 {
+			reg = <2>;
+			phy-handle = <&u301>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u301: ethernet-phy@3 {
+					reg = <3>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/dts/src/arm64/renesas/r8a779f0.dtsi b/dts/src/arm64/renesas/r8a779f0.dtsi
index c2f152bcf1..67a4f2d448 100644
--- a/dts/src/arm64/renesas/r8a779f0.dtsi
+++ b/dts/src/arm64/renesas/r8a779f0.dtsi
@@ -469,6 +469,16 @@
 			status = "disabled";
 		};
 
+		eth_serdes: phy@e6444000 {
+			compatible = "renesas,r8a779f0-ether-serdes";
+			reg = <0 0xe6444000 0 0x2800>;
+			clocks = <&cpg CPG_MOD 1506>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1506>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			compatible = "renesas,i2c-r8a779f0",
 				     "renesas,rcar-gen4-i2c";
@@ -577,7 +587,7 @@
 			reg = <0 0xe6540000 0 0x60>;
 			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
@@ -594,7 +604,7 @@
 			reg = <0 0xe6550000 0 0x60>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 515>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
@@ -611,7 +621,7 @@
 			reg = <0 0xe6560000 0 0x60>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
@@ -628,7 +638,7 @@
 			reg = <0 0xe66a0000 0 0x60>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 517>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
@@ -651,13 +661,113 @@
 			status = "disabled";
 		};
 
+		rswitch: ethernet@e6880000 {
+			compatible = "renesas,r8a779f0-ether-switch";
+			reg = <0 0xe6880000 0 0x20000>, <0 0xe68c0000 0 0x20000>;
+			reg-names = "base", "secure_base";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mfwd_error", "race_error",
+					  "coma_error", "gwca0_error",
+					  "gwca1_error", "etha0_error",
+					  "etha1_error", "etha2_error",
+					  "gptp0_status", "gptp1_status",
+					  "mfwd_status", "race_status",
+					  "coma_status", "gwca0_status",
+					  "gwca1_status", "etha0_status",
+					  "etha1_status", "etha2_status",
+					  "rmac0_status", "rmac1_status",
+					  "rmac2_status",
+					  "gwca0_rxtx0", "gwca0_rxtx1",
+					  "gwca0_rxtx2", "gwca0_rxtx3",
+					  "gwca0_rxtx4", "gwca0_rxtx5",
+					  "gwca0_rxtx6", "gwca0_rxtx7",
+					  "gwca1_rxtx0", "gwca1_rxtx1",
+					  "gwca1_rxtx2", "gwca1_rxtx3",
+					  "gwca1_rxtx4", "gwca1_rxtx5",
+					  "gwca1_rxtx6", "gwca1_rxtx7",
+					  "gwca0_rxts0", "gwca0_rxts1",
+					  "gwca1_rxts0", "gwca1_rxts1",
+					  "rmac0_mdio", "rmac1_mdio",
+					  "rmac2_mdio",
+					  "rmac0_phy", "rmac1_phy",
+					  "rmac2_phy";
+			clocks = <&cpg CPG_MOD 1505>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1505>;
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phys = <&eth_serdes 0>;
+				};
+				port@1 {
+					reg = <1>;
+					phys = <&eth_serdes 1>;
+				};
+				port@2 {
+					reg = <2>;
+					phys = <&eth_serdes 2>;
+				};
+			};
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a779f0",
 				     "renesas,rcar-gen4-scif", "renesas,scif";
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
@@ -674,7 +784,7 @@
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
@@ -691,7 +801,7 @@
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 704>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
@@ -708,7 +818,7 @@
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
diff --git a/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
index 895f0bd9f7..c10740aee9 100644
--- a/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ b/dts/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -96,6 +96,24 @@
 		device_type = "memory";
 		reg = <0x6 0x00000000 0x1 0x00000000>;
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &avb0 {
@@ -135,6 +153,17 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	io_expander_a: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	eeprom@50 {
 		compatible = "rohm,br24g01", "atmel,24c01";
 		label = "cpu-board";
@@ -143,6 +172,23 @@
 	};
 };
 
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
 &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
@@ -180,17 +226,56 @@
 		bias-pull-up;
 	};
 
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif_clk_pins: scif_clk {
 		groups = "scif_clk";
 		function = "scif_clk";
 	};
 };
 
-&scif_clk {
-	clock-frequency = <24000000>;
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1200000>;
+				read-only;
+			};
+			user@1200000 {
+				reg = <0x1200000 0x2e00000>;
+			};
+		};
+	};
 };
 
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/dts/src/arm64/renesas/r8a779g0.dtsi b/dts/src/arm64/renesas/r8a779g0.dtsi
index d70f0600ae..45d8d927ad 100644
--- a/dts/src/arm64/renesas/r8a779g0.dtsi
+++ b/dts/src/arm64/renesas/r8a779g0.dtsi
@@ -14,18 +14,138 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a76_0>;
+				};
+				core1 {
+					cpu = <&a76_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a76_2>;
+				};
+				core1 {
+					cpu = <&a76_3>;
+				};
+			};
+		};
+
 		a76_0: cpu@0 {
 			compatible = "arm,cortex-a76";
 			reg = <0>;
 			device_type = "cpu";
 			power-domains = <&sysc R8A779G0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_1: cpu@100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D0C1>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_2: cpu@10000 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C0>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_3: cpu@10100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C1>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+	       };
+
+		L3_CA76_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA76_1: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D1>;
+			cache-unified;
+			cache-level = <3>;
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
 	extal_clk: extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -214,6 +334,76 @@
 			#interrupt-cells = <2>;
 		};
 
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779g0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a779g0-cpg-mssr";
 			reg = <0 0xe6150000 0 0x4000>;
@@ -235,12 +425,96 @@
 			#power-domain-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			compatible = "renesas,i2c-r8a779g0",
 				     "renesas,rcar-gen4-i2c";
 			reg = <0 0xe6500000 0 0x40>;
 			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 518>;
+			dmas = <&dmac0 0x91>, <&dmac0 0x90>,
+			       <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 518>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -255,6 +529,9 @@
 			reg = <0 0xe6508000 0 0x40>;
 			interrupts = <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 519>;
+			dmas = <&dmac0 0x93>, <&dmac0 0x92>,
+			       <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 519>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -269,6 +546,9 @@
 			reg = <0 0xe6510000 0 0x40>;
 			interrupts = <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 520>;
+			dmas = <&dmac0 0x95>, <&dmac0 0x94>,
+			       <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 520>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -283,6 +563,9 @@
 			reg = <0 0xe66d0000 0 0x40>;
 			interrupts = <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 521>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>,
+			       <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 521>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -297,6 +580,9 @@
 			reg = <0 0xe66d8000 0 0x40>;
 			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 522>;
+			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>,
+			       <&dmac1 0x99>, <&dmac1 0x98>;
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 522>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -311,6 +597,9 @@
 			reg = <0 0xe66e0000 0 0x40>;
 			interrupts = <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 523>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>,
+			       <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 523>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -321,19 +610,72 @@
 
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a779g0",
-				     "renesas,rcar-gen4-hscif",
-				     "renesas,hscif";
-			reg = <0 0xe6540000 0 96>;
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+			       <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 514>;
 			status = "disabled";
 		};
 
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+			       <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+			       <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+			       <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
@@ -475,6 +817,381 @@
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@e6e37000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e37000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm8: pwm@e6e38000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e38000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm9: pwm@e6e39000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e39000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
+			       <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
+			       <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
+			       <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
+			       <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a779g0", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x40>,
+			       <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>,
+			       <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>,
+			       <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>,
+			       <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof4: spi@e6c20000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c20000 0 0x0064>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			dmas = <&dmac0 0x49>, <&dmac0 0x48>,
+			       <&dmac1 0x49>, <&dmac1 0x48>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof5: spi@e6c28000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c28000 0 0x0064>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			dmas = <&dmac0 0x4b>, <&dmac0 0x4a>,
+			       <&dmac1 0x4b>, <&dmac1 0x4a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -483,7 +1200,7 @@
 			reg = <0x0 0xf1000000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x110000>;
 			interrupts = <GIC_PPI 9
-				      (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+				      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		prr: chipid@fff00044 {
@@ -494,9 +1211,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
diff --git a/dts/src/arm64/renesas/r9a07g043.dtsi b/dts/src/arm64/renesas/r9a07g043.dtsi
index 689aa4ba41..3f7d451b11 100644
--- a/dts/src/arm64/renesas/r9a07g043.dtsi
+++ b/dts/src/arm64/renesas/r9a07g043.dtsi
@@ -1,11 +1,10 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2UL SoC
+ * Device Tree Source for the RZ/Five and RZ/G2UL SoCs
  *
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/r9a07g043-cpg.h>
 
 / {
@@ -69,36 +68,8 @@
 		};
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a55";
-			reg = <0>;
-			device_type = "cpu";
-			#cooling-cells = <2>;
-			next-level-cache = <&L3_CA55>;
-			enable-method = "psci";
-			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		L3_CA55: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-size = <0x40000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -107,10 +78,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x10049c00 0 0x400>;
-			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(329) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
@@ -128,10 +99,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a000 0 0x400>;
-			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(333) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
@@ -149,10 +120,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(335) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(336) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
@@ -170,10 +141,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a800 0 0x400>;
-			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(341) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
@@ -190,9 +161,9 @@
 		spi0: spi@1004ac00 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004ac00 0 0x400>;
-			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(415) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(413) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(414) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>;
 			resets = <&cpg R9A07G043_RSPI0_RST>;
@@ -208,9 +179,9 @@
 		spi1: spi@1004b000 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004b000 0 0x400>;
-			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(418) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(416) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(417) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>;
 			resets = <&cpg R9A07G043_RSPI1_RST>;
@@ -226,9 +197,9 @@
 		spi2: spi@1004b400 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004b400 0 0x400>;
-			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(421) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(419) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(420) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>;
 			resets = <&cpg R9A07G043_RSPI2_RST>;
@@ -245,12 +216,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004b800 0 0x400>;
-			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(380) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(382) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(383) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(381) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
@@ -264,12 +235,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004bc00 0 0x400>;
-			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(385) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(387) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(388) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(386) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
@@ -283,12 +254,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c000 0 0x400>;
-			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(390) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(392) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(393) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(391) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
@@ -302,12 +273,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c400 0 0x400>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(395) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(397) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(398) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(396) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
@@ -321,12 +292,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c800 0 0x400>;
-			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(400) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(402) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(403) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(401) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
@@ -339,10 +310,10 @@
 		sci0: serial@1004d000 {
 			compatible = "renesas,r9a07g043-sci", "renesas,sci";
 			reg = <0 0x1004d000 0 0x400>;
-			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(405) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(406) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(407) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(408) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
 			clock-names = "fck";
@@ -354,10 +325,10 @@
 		sci1: serial@1004d400 {
 			compatible = "renesas,r9a07g043-sci", "renesas,sci";
 			reg = <0 0x1004d400 0 0x400>;
-			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(409) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(410) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(411) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(412) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
 			clock-names = "fck";
@@ -369,14 +340,14 @@
 		canfd: can@10050000 {
 			compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd";
 			reg = <0 0x10050000 0 0x8000>;
-			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(426) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(427) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(422) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(424) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(428) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(423) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(425) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(429) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "g_err", "g_recc",
 					  "ch0_err", "ch0_rec", "ch0_trx",
 					  "ch1_err", "ch1_rec", "ch1_trx";
@@ -405,14 +376,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058000 0 0x400>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(350) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(348) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(349) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(352) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(353) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(351) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(354) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(355) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>;
@@ -427,14 +398,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058400 0 0x400>;
-			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(358) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(356) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(357) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(360) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(361) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(359) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(362) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(363) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>;
@@ -449,14 +420,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058800 0 0x400>;
-			interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(366) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(364) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(365) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(368) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(369) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(367) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(370) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(371) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>;
@@ -471,14 +442,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058c00 0 0x400>;
-			interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(374) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(372) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(373) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(376) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(377) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(375) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(378) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(379) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>;
@@ -491,7 +462,7 @@
 		adc: adc@10059000 {
 			compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
 			reg = <0 0x10059000 0 0x400>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(347) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>,
 				 <&cpg CPG_MOD R9A07G043_ADC_PCLK>;
 			clock-names = "adclk", "pclk";
@@ -551,12 +522,6 @@
 		sysc: system-controller@11020000 {
 			compatible = "renesas,r9a07g043-sysc";
 			reg = <0 0x11020000 0 0x10000>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "lpm_int", "ca55stbydone_int",
-					  "cm33stbyr_int", "ca55_deny";
 			status = "disabled";
 		};
 
@@ -578,23 +543,23 @@
 				     "renesas,rz-dmac";
 			reg = <0 0x11820000 0 0x10000>,
 			      <0 0x11830000 0 0x10000>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(141) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(125) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(126) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(127) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(128) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(129) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(130) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(131) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(132) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(133) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(134) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(135) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(136) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(137) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(138) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(139) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(140) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -609,22 +574,12 @@
 			dma-channels = <16>;
 		};
 
-		gic: interrupt-controller@11900000 {
-			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x0 0x11900000 0 0x40000>,
-			      <0x0 0x11940000 0 0x60000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
-		};
-
 		sdhi0: mmc@11c00000 {
 			compatible = "renesas,sdhi-r9a07g043",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(104) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(105) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>,
 				 <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>,
 				 <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>,
@@ -639,8 +594,8 @@
 			compatible = "renesas,sdhi-r9a07g043",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c10000 0 0x10000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(106) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(107) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>,
 				 <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>,
 				 <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>,
@@ -655,9 +610,9 @@
 			compatible = "renesas,r9a07g043-gbeth",
 				     "renesas,rzg2l-gbeth";
 			reg = <0 0x11c20000 0 0x10000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(85) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(86) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mux", "fil", "arp_ns";
 			phy-mode = "rgmii";
 			clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>,
@@ -675,9 +630,9 @@
 			compatible = "renesas,r9a07g043-gbeth",
 				     "renesas,rzg2l-gbeth";
 			reg = <0 0x11c30000 0 0x10000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(87) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(88) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(89) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mux", "fil", "arp_ns";
 			phy-mode = "rgmii";
 			clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>,
@@ -705,7 +660,7 @@
 		ohci0: usb@11c50000 {
 			compatible = "generic-ohci";
 			reg = <0 0x11c50000 0 0x100>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>,
@@ -719,7 +674,7 @@
 		ohci1: usb@11c70000 {
 			compatible = "generic-ohci";
 			reg = <0 0x11c70000 0 0x100>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(96) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>,
@@ -733,7 +688,7 @@
 		ehci0: usb@11c50100 {
 			compatible = "generic-ehci";
 			reg = <0 0x11c50100 0 0x100>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>,
@@ -748,7 +703,7 @@
 		ehci1: usb@11c70100 {
 			compatible = "generic-ehci";
 			reg = <0 0x11c70100 0 0x100>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(97) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>,
@@ -764,7 +719,7 @@
 			compatible = "renesas,usb2-phy-r9a07g043",
 				     "renesas,rzg2l-usb2-phy";
 			reg = <0 0x11c50200 0 0x700>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(94) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>;
@@ -777,7 +732,7 @@
 			compatible = "renesas,usb2-phy-r9a07g043",
 				     "renesas,rzg2l-usb2-phy";
 			reg = <0 0x11c70200 0 0x700>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(99) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>;
@@ -790,10 +745,10 @@
 			compatible = "renesas,usbhs-r9a07g043",
 				     "renesas,rza2-usbhs";
 			reg = <0 0x11c60000 0 0x10000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(100) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(101) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(102) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(103) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>;
 			resets = <&phyrst 0>,
@@ -812,34 +767,19 @@
 			clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_WDT0_CLK>;
 			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(49) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "wdt", "perrout";
 			resets = <&cpg R9A07G043_WDT0_PRESETN>;
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
 
-		wdt2: watchdog@12800400 {
-			compatible = "renesas,r9a07g043-wdt",
-				     "renesas,rzg2l-wdt";
-			reg = <0 0x12800400 0 0x400>;
-			clocks = <&cpg CPG_MOD R9A07G043_WDT2_PCLK>,
-				 <&cpg CPG_MOD R9A07G043_WDT2_CLK>;
-			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "wdt", "perrout";
-			resets = <&cpg R9A07G043_WDT2_PRESETN>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
 		ostm0: timer@12801000 {
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801000 0x0 0x400>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>;
 			resets = <&cpg R9A07G043_OSTM0_PRESETZ>;
 			power-domains = <&cpg>;
@@ -850,7 +790,7 @@
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801400 0x0 0x400>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>;
 			resets = <&cpg R9A07G043_OSTM1_PRESETZ>;
 			power-domains = <&cpg>;
@@ -861,7 +801,7 @@
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801800 0x0 0x400>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(48) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>;
 			resets = <&cpg R9A07G043_OSTM2_PRESETZ>;
 			power-domains = <&cpg>;
@@ -899,12 +839,4 @@
 			};
 		};
 	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
 };
diff --git a/dts/src/arm64/renesas/r9a07g043u.dtsi b/dts/src/arm64/renesas/r9a07g043u.dtsi
new file mode 100644
index 0000000000..6af5f3bca2
--- /dev/null
+++ b/dts/src/arm64/renesas/r9a07g043u.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)		GIC_SPI nr
+
+#include "r9a07g043.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&soc {
+	interrupt-parent = <&gic>;
+
+	gic: interrupt-controller@11900000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x11900000 0 0x40000>,
+		      <0x0 0x11940000 0 0x60000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sysc {
+	interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "lpm_int", "ca55stbydone_int",
+			  "cm33stbyr_int", "ca55_deny";
+};
diff --git a/dts/src/arm64/renesas/r9a07g043u11-smarc.dts b/dts/src/arm64/renesas/r9a07g043u11-smarc.dts
index 059885a01e..01483b4302 100644
--- a/dts/src/arm64/renesas/r9a07g043u11-smarc.dts
+++ b/dts/src/arm64/renesas/r9a07g043u11-smarc.dts
@@ -17,7 +17,7 @@
 #define SW_SW0_DEV_SEL	1
 #define SW_ET0_EN_N	1
 
-#include "r9a07g043.dtsi"
+#include "r9a07g043u.dtsi"
 #include "rzg2ul-smarc-som.dtsi"
 #include "rzg2ul-smarc.dtsi"
 
diff --git a/dts/src/arm64/renesas/r9a07g044.dtsi b/dts/src/arm64/renesas/r9a07g044.dtsi
index 2283d4fb87..487536696d 100644
--- a/dts/src/arm64/renesas/r9a07g044.dtsi
+++ b/dts/src/arm64/renesas/r9a07g044.dtsi
@@ -109,6 +109,7 @@
 			compatible = "cache";
 			cache-unified;
 			cache-size = <0x40000>;
+			cache-level = <3>;
 		};
 	};
 
@@ -644,7 +645,6 @@
 			reg = <0 0x11030000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			#address-cells = <2>;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&irqc>;
 			interrupt-controller;
@@ -994,21 +994,6 @@
 			status = "disabled";
 		};
 
-		wdt2: watchdog@12800400 {
-			compatible = "renesas,r9a07g044-wdt",
-				     "renesas,rzg2l-wdt";
-			reg = <0 0x12800400 0 0x400>;
-			clocks = <&cpg CPG_MOD R9A07G044_WDT2_PCLK>,
-				 <&cpg CPG_MOD R9A07G044_WDT2_CLK>;
-			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "wdt", "perrout";
-			resets = <&cpg R9A07G044_WDT2_PRESETN>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
 		ostm0: timer@12801000 {
 			compatible = "renesas,r9a07g044-ostm",
 				     "renesas,ostm";
diff --git a/dts/src/arm64/renesas/r9a07g044c2-smarc.dts b/dts/src/arm64/renesas/r9a07g044c2-smarc.dts
index fc34058002..f67a6f125d 100644
--- a/dts/src/arm64/renesas/r9a07g044c2-smarc.dts
+++ b/dts/src/arm64/renesas/r9a07g044c2-smarc.dts
@@ -6,7 +6,37 @@
  */
 
 /dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SD0_DEV_SEL	1
+
+#define SW_SCIF_CAN	0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN	0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN	1
+#endif
+
+#if (SW_SCIF_CAN && SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
+#endif
+
+/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
 #include "r9a07g044c2.dtsi"
+#include "rzg2lc-smarc-som.dtsi"
 #include "rzg2lc-smarc.dtsi"
 
 / {
diff --git a/dts/src/arm64/renesas/r9a07g054.dtsi b/dts/src/arm64/renesas/r9a07g054.dtsi
index 358d4c3446..304ade5442 100644
--- a/dts/src/arm64/renesas/r9a07g054.dtsi
+++ b/dts/src/arm64/renesas/r9a07g054.dtsi
@@ -109,6 +109,7 @@
 			compatible = "cache";
 			cache-unified;
 			cache-size = <0x40000>;
+			cache-level = <3>;
 		};
 	};
 
@@ -650,7 +651,6 @@
 			reg = <0 0x11030000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			#address-cells = <2>;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&irqc>;
 			interrupt-controller;
@@ -1000,21 +1000,6 @@
 			status = "disabled";
 		};
 
-		wdt2: watchdog@12800400 {
-			compatible = "renesas,r9a07g054-wdt",
-				     "renesas,rzg2l-wdt";
-			reg = <0 0x12800400 0 0x400>;
-			clocks = <&cpg CPG_MOD R9A07G054_WDT2_PCLK>,
-				 <&cpg CPG_MOD R9A07G054_WDT2_CLK>;
-			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "wdt", "perrout";
-			resets = <&cpg R9A07G054_WDT2_PRESETN>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
 		ostm0: timer@12801000 {
 			compatible = "renesas,r9a07g054-ostm",
 				     "renesas,ostm";
diff --git a/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts b/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts
index 5c15d73d05..11e1d51c7c 100644
--- a/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts
+++ b/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts
@@ -83,3 +83,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&wdt0 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/renesas/r9a09g011.dtsi b/dts/src/arm64/renesas/r9a09g011.dtsi
index fb1a97202c..0373ec409d 100644
--- a/dts/src/arm64/renesas/r9a09g011.dtsi
+++ b/dts/src/arm64/renesas/r9a09g011.dtsi
@@ -37,8 +37,15 @@
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			device_type = "cpu";
+			next-level-cache = <&L2_CA53>;
 			clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>;
 		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
 	soc: soc {
@@ -48,7 +55,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@82000000 {
+		gic: interrupt-controller@82010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
@@ -123,10 +130,15 @@
 			#power-domain-cells = <0>;
 		};
 
+		sys: system-controller@a3f03000 {
+			compatible = "renesas,r9a09g011-sys";
+			reg = <0 0xa3f03000 0 0x400>;
+		};
+
 		i2c0: i2c@a4030000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030000 0 0x80>;
 			interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
@@ -140,7 +152,7 @@
 		i2c2: i2c@a4030100 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030100 0 0x80>;
 			interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>;
@@ -161,6 +173,19 @@
 			status = "disabled";
 		};
 
+		wdt0: watchdog@a4050000 {
+			compatible = "renesas,r9a09g011-wdt",
+				     "renesas,rzv2m-wdt";
+			reg = <0 0xa4050000 0 0x80>;
+			clocks = <&cpg CPG_MOD R9A09G011_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A09G011_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&cpg R9A09G011_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		pinctrl: pinctrl@b6250000 {
 			compatible = "renesas,r9a09g011-pinctrl";
 			reg = <0 0xb6250000 0 0x800>;
diff --git a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi
index c4faff0923..fbbb4f0344 100644
--- a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi
+++ b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi
@@ -351,8 +351,3 @@
 	status = "okay";
 	timeout-sec = <60>;
 };
-
-&wdt2 {
-	status = "okay";
-	timeout-sec = <60>;
-};
diff --git a/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi
index 78e6e2376b..8a0d56872d 100644
--- a/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi
+++ b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi
@@ -276,8 +276,3 @@
 	status = "okay";
 	timeout-sec = <60>;
 };
-
-&wdt2 {
-	status = "okay";
-	timeout-sec = <60>;
-};
diff --git a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi
index 6be25a8a28..b6bd27196d 100644
--- a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi
+++ b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi
@@ -8,37 +8,9 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
-/*
- * DIP-Switch SW1 setting on SoM
- * 1 : High; 0: Low
- * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
- * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
- * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
- * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
- * Please change below macros according to SW1 setting
- */
-
-#define SW_SD0_DEV_SEL	1
-
-#define SW_SCIF_CAN	0
-#if (SW_SCIF_CAN)
-/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
-#define SW_RSPI_CAN	0
-#else
-/* Please set SW_RSPI_CAN. Default value is 1 */
-#define SW_RSPI_CAN	1
-#endif
-
-#if (SW_SCIF_CAN && SW_RSPI_CAN)
-#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
-#endif
-
-#include "rzg2lc-smarc-som.dtsi"
 #include "rzg2lc-smarc-pinfunction.dtsi"
 #include "rz-smarc-common.dtsi"
 
-/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
-#define PMOD1_SER0	1
 
 / {
 	aliases {
diff --git a/dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi b/dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi
index bd8bc858c2..58923dc83f 100644
--- a/dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi
+++ b/dts/src/arm64/renesas/rzg2ul-smarc-pinfunction.dtsi
@@ -99,6 +99,13 @@
 		input-enable;
 	};
 
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
+			 <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */
+	};
+
 	ssi1_pins: ssi1 {
 		pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */
 			 <RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */
diff --git a/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi
index 2a0feb53f0..931efc07d6 100644
--- a/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi
+++ b/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi
@@ -221,13 +221,6 @@
 			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
 		};
 	};
-
-	spi1_pins: rspi1 {
-		pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
-			 <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
-			 <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
-			 <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */
-	};
 };
 
 #if (SW_SW0_DEV_SEL)
diff --git a/dts/src/arm64/renesas/salvator-panel-aa104xd12.dts b/dts/src/arm64/renesas/salvator-panel-aa104xd12.dtso
index c83a30adc6..c83a30adc6 100644
--- a/dts/src/arm64/renesas/salvator-panel-aa104xd12.dts
+++ b/dts/src/arm64/renesas/salvator-panel-aa104xd12.dtso
diff --git a/dts/src/arm64/rockchip/px30-ringneck-haikou.dts b/dts/src/arm64/rockchip/px30-ringneck-haikou.dts
new file mode 100644
index 0000000000..08a3ad3e7a
--- /dev/null
+++ b/dts/src/arm64/rockchip/px30-ringneck-haikou.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30-ringneck.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit";
+	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
+
+	aliases {
+		mmc2 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-slp-btn-n {
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wake-n {
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
+
+		sd_card_led: led-1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			clocks = <&sgtl5000_clk>;
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&i2s0_8ch>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <24576000>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdda_codec: vdda-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+		VDDD-supply = <&vddd_codec>;
+	};
+};
+
+&i2c3 {
+	eeprom@50 {
+		reg = <0x50>;
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		size = <128>;
+		vcc-supply = <&vcc3v3_baseboard>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pinctrl {
+	haikou {
+		haikou_keys_pin: haikou-keys-pin {
+			rockchip,pins =
+			  /* WAKE# */
+			  <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* LID_BTN */
+			  <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/px30-ringneck.dtsi b/dts/src/arm64/rockchip/px30-ringneck.dtsi
new file mode 100644
index 0000000000..1239775583
--- /dev/null
+++ b/dts/src/arm64/rockchip/px30-ringneck.dtsi
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdio;
+		rtc0 = &rtc_twi;
+		rtc1 = &rk809;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pin>;
+		status = "okay";
+
+		module_led: led-0 {
+			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	vcc5v0_sys: vccsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	supports-emmc;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+
+	status = "okay";
+};
+
+/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
+&gmac {
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	phy-supply = <&vcc_3v3>;
+	clock_in_out = "output";
+};
+
+&gpio2 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
+	 * eMMC powered-down initially (in fact it keeps the reset signal
+	 * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
+	 * the SPL has been booted from SD Card.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "bios_disable_override";
+		gpio-hog;
+	};
+
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually
+	 * represents the state of a switch on the baseboard.
+	 */
+	bios-disable-n-hog {
+		gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
+		line-name = "bios_disable";
+		input;
+		gpio-hog;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>;
+		pinctrl-names = "default";
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* SE05x is limited to Fast Mode */
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	rockchip,trcm-sync-tx-only;
+
+	pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
+		     &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>;
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_emmc>;
+	vccio-oscgpi-supply = <&vcc_3v3>;
+
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		module_led_pin: module-led-pin {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+/* Mule UCAN */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/rk3308.dtsi b/dts/src/arm64/rockchip/rk3308.dtsi
index 2dfa67f1cd..dd228a256a 100644
--- a/dts/src/arm64/rockchip/rk3308.dtsi
+++ b/dts/src/arm64/rockchip/rk3308.dtsi
@@ -96,6 +96,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/dts/src/arm64/rockchip/rk3326-anbernic-rg351m.dts b/dts/src/arm64/rockchip/rk3326-anbernic-rg351m.dts
new file mode 100644
index 0000000000..61b31688b4
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3326-anbernic-rg351m.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "Anbernic RG351M";
+	compatible = "anbernic,rg351m", "rockchip,rk3326";
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+/delete-node/ &builtin_gamepad;
+/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
+
+&internal_display {
+	compatible = "elida,kd35t133";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+/delete-node/ &rk817_charger;
diff --git a/dts/src/arm64/rockchip/rk3326-odroid-go.dtsi b/dts/src/arm64/rockchip/rk3326-odroid-go.dtsi
new file mode 100644
index 0000000000..fbc6bfbaa5
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3326-odroid-go.dtsi
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	builtin_gamepad: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		button-sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		button-sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		button-sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		button-sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		button-sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		button-sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		button-sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		button-sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		btn_f1: button-sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		btn_f2: button-sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		btn_f3: button-sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		btn_f4: button-sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		btn_f5: button-sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		btn_f6: button-sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		button-sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		button-sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Analog";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&usb_midu>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			LDO_REG9 {
+				/* unused */
+			};
+
+			usb_midu: BOOST {
+				regulator-name = "usb_midu";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		rk817_charger: charger {
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3326-odroid-go2-v11.dts b/dts/src/arm64/rockchip/rk3326-odroid-go2-v11.dts
new file mode 100644
index 0000000000..139c898e59
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3326-odroid-go2-v11.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance Black Edition";
+	compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
+
+	aliases {
+		mmc1 = &sdio;
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <172 772>;
+			linux,code = <ABS_X>;
+			};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <278 815>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pins>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&builtin_gamepad {
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd35t133";
+};
+
+&rk817 {
+	regulators {
+		vcc_wifi: LDO_REG9 {
+			regulator-name = "vcc_wifi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_pwrseq_pins: wifi-pwrseq-pins {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3326-odroid-go2.dts b/dts/src/arm64/rockchip/rk3326-odroid-go2.dts
index 72899a7143..4702183b67 100644
--- a/dts/src/arm64/rockchip/rk3326-odroid-go2.dts
+++ b/dts/src/arm64/rockchip/rk3326-odroid-go2.dts
@@ -2,30 +2,21 @@
 /*
  * Copyright (c) 2019 Hardkernel Co., Ltd
  * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3326.dtsi"
+#include "rk3326-odroid-go.dtsi"
 
 / {
 	model = "ODROID-GO Advance";
 	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
 
-	aliases {
-		mmc0 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	adc-joystick {
+	analog_sticks: adc-joystick {
 		compatible = "adc-joystick";
 		io-channels = <&saradc 1>,
 			      <&saradc 2>;
+		poll-interval = <60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -46,12 +37,6 @@
 		};
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&vcc_bl>;
-		pwms = <&pwm1 0 25000 0>;
-	};
-
 	battery: battery {
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <3000000>;
@@ -63,606 +48,19 @@
 		voltage-min-design-microvolt = <3500000>;
 
 		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 =	<4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
 					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
 					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
 					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
 					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
 					<3574170 0>;
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&btn_pins>;
-
-		/*
-		 *      *** ODROIDGO2-Advance Switch layout ***
-		 * |------------------------------------------------|
-		 * | sw15                                      sw16 |
-		 * |------------------------------------------------|
-		 * |     sw1      |-------------------|      sw8    |
-		 * |  sw3   sw4   |                   |   sw7   sw5 |
-		 * |     sw2      |    LCD Display    |      sw6    |
-		 * |              |                   |             |
-		 * |              |-------------------|             |
-		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
-		 * |------------------------------------------------|
-		 */
-
-		button-sw1 {
-			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
-			label = "DPAD-UP";
-			linux,code = <BTN_DPAD_UP>;
-		};
-		button-sw2 {
-			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
-			label = "DPAD-DOWN";
-			linux,code = <BTN_DPAD_DOWN>;
-		};
-		button-sw3 {
-			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
-			label = "DPAD-LEFT";
-			linux,code = <BTN_DPAD_LEFT>;
-		};
-		button-sw4 {
-			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
-			label = "DPAD-RIGHT";
-			linux,code = <BTN_DPAD_RIGHT>;
-		};
-		button-sw5 {
-			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "BTN-A";
-			linux,code = <BTN_EAST>;
-		};
-		button-sw6 {
-			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "BTN-B";
-			linux,code = <BTN_SOUTH>;
-		};
-		button-sw7 {
-			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "BTN-Y";
-			linux,code = <BTN_WEST>;
-		};
-		button-sw8 {
-			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "BTN-X";
-			linux,code = <BTN_NORTH>;
-		};
-		button-sw9 {
-			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
-			label = "F1";
-			linux,code = <BTN_TRIGGER_HAPPY1>;
-		};
-		button-sw10 {
-			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "F2";
-			linux,code = <BTN_TRIGGER_HAPPY2>;
-		};
-		button-sw11 {
-			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "F3";
-			linux,code = <BTN_TRIGGER_HAPPY3>;
-		};
-		button-sw12 {
-			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
-			label = "F4";
-			linux,code = <BTN_TRIGGER_HAPPY4>;
-		};
-		button-sw13 {
-			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
-			label = "F5";
-			linux,code = <BTN_TRIGGER_HAPPY5>;
-		};
-		button-sw14 {
-			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "F6";
-			linux,code = <BTN_TRIGGER_HAPPY6>;
-		};
-		button-sw15 {
-			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "TOP-LEFT";
-			linux,code = <BTN_TL>;
-		};
-		button-sw16 {
-			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "TOP-RIGHT";
-			linux,code = <BTN_TR>;
-		};
-	};
-
-	leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&blue_led_pin>;
-
-		blue_led: led-0 {
-			label = "blue:heartbeat";
-			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	rk817-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Analog";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphones",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"MICL", "Mic Jack",
-			"Headphones", "HPOL",
-			"Headphones", "HPOR",
-			"Speaker", "SPKO";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_2ch>;
-		};
-	};
-
-	vccsys: vccsys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v8_sys";
-		regulator-always-on;
-		regulator-min-microvolt = <3800000>;
-		regulator-max-microvolt = <3800000>;
-	};
-
-	vcc_host: vcc_host {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_host";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&usb_midu>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cru {
-	assigned-clocks = <&cru PLL_NPLL>,
-		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
-		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
-		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
-		<&cru PLL_CPLL>;
-
-	assigned-clock-rates = <1188000000>,
-		<200000000>, <200000000>,
-		<150000000>, <150000000>,
-		<100000000>, <200000000>,
-		<17000000>;
 };
 
-&display_subsystem {
-	status = "okay";
+&internal_display {
+	compatible = "elida,kd35t133";
 };
 
-&dsi {
-	status = "okay";
-
-	ports {
-		mipi_out: port@1 {
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "elida,kd35t133";
-		reg = <0>;
-		backlight = <&backlight>;
-		iovcc-supply = <&vcc_lcd>;
-		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
-		rotation = <270>;
-		vdd-supply = <&vcc_lcd>;
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
-&dsi_dphy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_logic>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <16>;
-	i2c-scl-rising-time-ns = <280>;
-	status = "okay";
-
-	rk817: pmic@20 {
-		compatible = "rockchip,rk817";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
-		clock-names = "mclk";
-		clocks = <&cru SCLK_I2S1_OUT>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
-		wakeup-source;
-		#clock-cells = <1>;
-		#sound-dai-cells = <0>;
-
-		vcc1-supply = <&vccsys>;
-		vcc2-supply = <&vccsys>;
-		vcc3-supply = <&vccsys>;
-		vcc4-supply = <&vccsys>;
-		vcc5-supply = <&vccsys>;
-		vcc6-supply = <&vccsys>;
-		vcc7-supply = <&vccsys>;
-		vcc8-supply = <&vccsys>;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vdd_arm: DCDC_REG2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v3: DCDC_REG4 {
-				regulator-name = "vcc_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_1v0: LDO_REG3 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG4 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_sd: LDO_REG6 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_bl: LDO_REG7 {
-				regulator-name = "vcc_bl";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_lcd: LDO_REG8 {
-				regulator-name = "vcc_lcd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <2800000>;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-name = "vcc_cam";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			usb_midu: BOOST {
-				regulator-name = "usb_midu";
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-
-		rk817_charger: charger {
-			monitored-battery = <&battery>;
-			rockchip,resistor-sense-micro-ohms = <10000>;
-			rockchip,sleep-enter-current-microamp = <300000>;
-			rockchip,sleep-filter-current-microamp = <100000>;
-		};
-
-		rk817_codec: codec {
-			rockchip,mic-in-differential;
-		};
-	};
-};
-
-/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
-&i2c1 {
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-/* I2S 1 Channel Used */
-&i2s1_2ch {
-	status = "okay";
-};
-
-&io_domains {
-	vccio1-supply = <&vcc_3v3>;
-	vccio2-supply = <&vccio_sd>;
-	vccio3-supply = <&vcc_3v3>;
-	vccio4-supply = <&vcc_3v3>;
-	vccio5-supply = <&vcc_3v3>;
-	vccio6-supply = <&vcc_3v3>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmuio1-supply = <&vcc3v3_pmu>;
-	pmuio2-supply = <&vcc3v3_pmu>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&sdmmc {
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_sd>;
-	vqmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&sfc {
-	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <108000000>;
-		spi-rx-bus-width = <2>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy {
-	status = "okay";
-
-	u2phy_host: host-port {
-		status = "okay";
-	};
-
-	u2phy_otg: otg-port {
-		status = "disabled";
-	};
-};
-
-&usb20_otg {
-	status = "okay";
-};
-
-/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer &uart1_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2m1_xfer>;
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&pinctrl {
-	btns {
-		btn_pins: btn-pins {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	headphone {
-		hp_det: hp-det {
-			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	leds {
-		blue_led_pin: blue-led-pin {
-			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		dc_det: dc-det {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pmic_int: pmic-int {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		soc_slppin_gpio: soc_slppin_gpio {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-
-		soc_slppin_rst: soc_slppin_rst {
-			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
-		};
-
-		soc_slppin_slp: soc_slppin_slp {
-			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
-		};
-	};
+&rk817_charger {
+	monitored-battery = <&battery>;
 };
diff --git a/dts/src/arm64/rockchip/rk3326-odroid-go3.dts b/dts/src/arm64/rockchip/rk3326-odroid-go3.dts
new file mode 100644
index 0000000000..842efbaf1a
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3326-odroid-go3.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Super";
+	compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+	joystick_mux_controller: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl = <&mux_en_pins>;
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+			    <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+
+	joystick_mux: adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&saradc 1>;
+		io-channel-names = "parent";
+		#io-channel-cells = <1>;
+
+		mux-controls = <&joystick_mux_controller>;
+		channels = "0", "1", "2", "3";
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&joystick_mux 0>,
+			      <&joystick_mux 1>,
+			      <&joystick_mux 2>,
+			      <&joystick_mux 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volume-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+/* f1 and f2 conflict with volume buttons */
+/delete-node/ &btn_f1;
+/delete-node/ &btn_f2;
+
+&builtin_gamepad {
+	button-sw19 {
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		label = "SELECT";
+		linux,code = <BTN_SELECT>;
+	};
+	/* note that TR2 and TL2 are swapped */
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw22 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "START";
+		linux,code = <BTN_START>;
+	};
+};
+
+&internal_display {
+	status = "disabled";
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joystick {
+		mux_en_pins: mux-pins {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi
index 49ae15708a..6d7a7bf72a 100644
--- a/dts/src/arm64/rockchip/rk3328.dtsi
+++ b/dts/src/arm64/rockchip/rk3328.dtsi
@@ -102,6 +102,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -1025,6 +1026,17 @@
 		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	crypto: crypto@ff060000 {
+		compatible = "rockchip,rk3328-crypto";
+		reg = <0x0 0xff060000 0x0 0x4000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_CRYPTO_MST>, <&cru HCLK_CRYPTO_SLV>,
+			 <&cru SCLK_CRYPTO>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO>;
+		reset-names = "crypto-rst";
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3328-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/dts/src/arm64/rockchip/rk3399-pinephone-pro.dts b/dts/src/arm64/rockchip/rk3399-pinephone-pro.dts
index 2e058c3150..04403a7623 100644
--- a/dts/src/arm64/rockchip/rk3399-pinephone-pro.dts
+++ b/dts/src/arm64/rockchip/rk3399-pinephone-pro.dts
@@ -81,6 +81,27 @@
 		regulator-max-microvolt = <1800000>;
 		vin-supply = <&vcc3v3_sys>;
 	};
+
+	wifi_pwrseq: sdio-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk818 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_pin>;
+		/*
+		 * Wait between power-on and SDIO access for CYP43455
+		 * POR circuit.
+		 */
+		post-power-on-delay-ms = <110>;
+		/*
+		 * Wait between consecutive toggles for CYP43455 CBUCK
+		 * regulator discharge.
+		 */
+		power-off-delay-us = <10000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &cpu_l0 {
@@ -360,11 +381,45 @@
 		};
 	};
 
+	sdio-pwrseq {
+		wifi_enable_h_pin: wifi-enable-h-pin {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sound {
 		vcc1v8_codec_en: vcc1v8-codec-en {
 			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
+
+	wireless-bluetooth {
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_pin: bt-host-wake-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
 };
 
 &sdmmc {
@@ -393,6 +448,27 @@
 	status = "okay";
 };
 
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk818 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/rockchip/rk3399-rock-4c-plus.dts b/dts/src/arm64/rockchip/rk3399-rock-4c-plus.dts
index f9884902f8..309c35d7fc 100644
--- a/dts/src/arm64/rockchip/rk3399-rock-4c-plus.dts
+++ b/dts/src/arm64/rockchip/rk3399-rock-4c-plus.dts
@@ -601,6 +601,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
 &u2phy0 {
 	status = "okay";
 
diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dtsi b/dts/src/arm64/rockchip/rk3399-rock960.dtsi
index 94e39ed633..c920ddf44b 100644
--- a/dts/src/arm64/rockchip/rk3399-rock960.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-rock960.dtsi
@@ -128,6 +128,8 @@
 };
 
 &hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_cec>;
diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi
index 92c2207e68..4391aea259 100644
--- a/dts/src/arm64/rockchip/rk3399.dtsi
+++ b/dts/src/arm64/rockchip/rk3399.dtsi
@@ -582,6 +582,26 @@
 		status = "disabled";
 	};
 
+	crypto0: crypto@ff8b0000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
+		reset-names = "master", "lave", "crypto";
+	};
+
+	crypto1: crypto@ff8b8000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b8000 0x0 0x4000>;
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
+		reset-names = "master", "slave", "crypto";
+	};
+
 	i2c1: i2c@ff110000 {
 		compatible = "rockchip,rk3399-i2c";
 		reg = <0x0 0xff110000 0x0 0x1000>;
diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg353p.dts b/dts/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
index 7a20e2d687..63cff402f3 100644
--- a/dts/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
+++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
@@ -5,7 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3566-anbernic-rgxx3.dtsi"
+#include "rk3566-anbernic-rg353x.dtsi"
 
 / {
 	model = "RG353P";
@@ -18,26 +18,66 @@
 		mmc3 = &sdmmc2;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&vcc_sys>;
-		pwms = <&pwm4 0 25000 0>;
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
 	};
-};
 
-&gpio_keys_control {
-	button-a {
-		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
-		label = "EAST";
-		linux,code = <BTN_EAST>;
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
 	};
 
-	button-left {
-		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
-		label = "DPAD-LEFT";
-		linux,code = <BTN_DPAD_LEFT>;
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
 	};
+};
 
+&gpio_keys_control {
 	button-r1 {
 		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
 		label = "TR";
@@ -49,27 +89,6 @@
 		label = "TR2";
 		linux,code = <BTN_TR2>;
 	};
-
-	button-right {
-		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
-		label = "DPAD-RIGHT";
-		linux,code = <BTN_DPAD_RIGHT>;
-	};
-
-	button-y {
-		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
-		label = "WEST";
-		linux,code = <BTN_WEST>;
-	};
-};
-
-&i2c0 {
-	/* This hardware is physically present but unused. */
-	power-monitor@62 {
-		compatible = "cellwise,cw2015";
-		reg = <0x62>;
-		status = "disabled";
-	};
 };
 
 &i2c2 {
@@ -78,8 +97,22 @@
 	status = "okay";
 };
 
-&pwm4 {
-	status = "okay";
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
 };
 
 &sdhci {
diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg353v.dts b/dts/src/arm64/rockchip/rk3566-anbernic-rg353v.dts
new file mode 100644
index 0000000000..885234a023
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg353v.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353V";
+	compatible = "anbernic,rg353v", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&i2c2 {
+	pintctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+&pinctrl {
+	touch {
+		touch_rst: touch-rst {
+			rockchip,pins =
+				<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts b/dts/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts
new file mode 100644
index 0000000000..a7dc462fe2
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353VS";
+	compatible = "anbernic,rg353vs", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi b/dts/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi
new file mode 100644
index 0000000000..65a80d1f6d
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <1200000000>, <200000000>, <241500000>;
+};
+
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "EAST";
+		linux,code = <BTN_EAST>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "WEST";
+		linux,code = <BTN_WEST>;
+	};
+};
+
+&i2c0 {
+	/* This hardware is physically present but unused. */
+	power-monitor@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		status = "disabled";
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts b/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts
index 3dc01549a5..5dafcc8629 100644
--- a/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts
+++ b/dts/src/arm64/rockchip/rk3566-anbernic-rg503.dts
@@ -17,6 +17,25 @@
 		mmc2 = &sdmmc2;
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =	<4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
 	gpio_spi: spi {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
@@ -29,6 +48,50 @@
 		cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
 	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <1200000000>, <200000000>, <500000000>;
 };
 
 &gpio_keys_control {
@@ -76,6 +139,13 @@
 };
 
 &pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gpio-spi {
 		spi_pins: spi-pins {
 			rockchip,pins =
@@ -85,3 +155,12 @@
 		};
 	};
 };
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi b/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
index 2b455143b8..41262a69d3 100644
--- a/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/dts/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -22,6 +22,7 @@
 			      <&adc_mux 3>;
 		pinctrl-0 = <&joy_mux_en>;
 		pinctrl-names = "default";
+		poll-interval = <60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -217,37 +218,6 @@
 		};
 	};
 
-	/* Channels reversed for both headphones and speakers. */
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "anbernic_rk817";
-		simple-audio-card,aux-devs = <&spk_amp>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphones",
-			"Speaker", "Internal Speakers";
-		simple-audio-card,routing =
-			"MICL", "Mic Jack",
-			"Headphones", "HPOL",
-			"Headphones", "HPOR",
-			"Internal Speakers", "Speaker Amp OUTL",
-			"Internal Speakers", "Speaker Amp OUTR",
-			"Speaker Amp INL", "HPOL",
-			"Speaker Amp INR", "HPOR";
-		simple-audio-card,pin-switches = "Internal Speakers";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_8ch>;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk817 1>;
@@ -258,14 +228,6 @@
 		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
 	};
 
-	spk_amp: audio-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
-		pinctrl-0 = <&spk_amp_enable_h>;
-		pinctrl-names = "default";
-		sound-name-prefix = "Speaker Amp";
-	};
-
 	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
@@ -607,13 +569,6 @@
 };
 
 &pinctrl {
-	audio-amplifier {
-		spk_amp_enable_h: spk-amp-enable-h {
-			rockchip,pins =
-				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	gpio-btns {
 		btn_pins_ctrl: btn-pins-ctrl {
 			rockchip,pins =
diff --git a/dts/src/arm64/rockchip/rk3566-box-demo.dts b/dts/src/arm64/rockchip/rk3566-box-demo.dts
new file mode 100644
index 0000000000..4c7f9abd59
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3566-box-demo.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com
+ * Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Rockchip RK3566 BOX DEMO Board";
+	compatible = "rockchip,rk3566-box-demo", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		linux,rc-map-name = "rc-beelink-gs1";
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h &wifi_32k>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	vcc12v0_dcin: regulator-vcc12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v0_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2_otg: regulator-vcc5v0-usb2-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcca_1v8: regulator-vcca-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdda_0v9: regulator-vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_fixed: regulator-vdd-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_cpu: regulator-vdd-cpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_logic";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents =  <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		    &gmac1m1_tx_bus2
+		    &gmac1m1_rx_bus2
+		    &gmac1m1_rgmii_clk
+		    &gmac1m1_rgmii_bus
+		    &gmac1m1_clkinout>;
+	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&hdmi {
+	assigned-clocks = <&cru CLK_HDMI_CEC>;
+	assigned-clock-rates = <32768>;
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_32k: wifi-32k {
+			rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	led {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vpu {
+	status = "okay";
+};
+
+&vdpu_mmu {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	vbus-supply = <&vcc5v0_usb2_otg>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/rk3566-roc-pc.dts b/dts/src/arm64/rockchip/rk3566-roc-pc.dts
index 9fd262334d..61c7a3ad73 100644
--- a/dts/src/arm64/rockchip/rk3566-roc-pc.dts
+++ b/dts/src/arm64/rockchip/rk3566-roc-pc.dts
@@ -82,6 +82,18 @@
 		vin-supply = <&usb_5v>;
 	};
 
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -122,6 +134,10 @@
 	status = "okay";
 };
 
+&combphy2 {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vdd_cpu>;
 };
@@ -443,6 +459,14 @@
 	};
 };
 
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
@@ -464,6 +488,16 @@
 		};
 	};
 
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic_int {
 			rockchip,pins =
diff --git a/dts/src/arm64/rockchip/rk3566-soquartz-blade.dts b/dts/src/arm64/rockchip/rk3566-soquartz-blade.dts
new file mode 100644
index 0000000000..4e49bebf54
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3566-soquartz-blade.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
+	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* labeled VCC_SSD in schematic */
+	vcc3v3_pcie_p: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v_dcin: vcc5v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	color = <LED_COLOR_ID_RED>;
+	function = LED_FUNCTION_DISK_ACTIVITY;
+	linux,default-trigger = "disk-activity";
+	status = "okay";
+};
+
+&led_work {
+	color = <LED_COLOR_ID_GREEN>;
+	function = LED_FUNCTION_STATUS;
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+&sdmmc0 {
+	vmmc-supply = <&vcc3v0_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v_dcin>;
+};
diff --git a/dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts b/dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts
index e00568a6be..263ce40770 100644
--- a/dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts
+++ b/dts/src/arm64/rockchip/rk3566-soquartz-cm4.dts
@@ -30,6 +30,12 @@
 	};
 };
 
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
 &gmac1 {
 	status = "okay";
 };
@@ -105,6 +111,11 @@
 	status = "okay";
 };
 
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
 &rgmii_phy1 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/rockchip/rk3566-soquartz-model-a.dts b/dts/src/arm64/rockchip/rk3566-soquartz-model-a.dts
new file mode 100644
index 0000000000..2208dbfb7f
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3566-soquartz-model-a.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
+	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled DCIN_12V in schematic */
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/*
+	 * Labelled VCC3V0_SD in schematic to not conflict with PMIC
+	 * regulator, it's 3.3v in actuality
+	 */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc12v_pcie: vcc12v-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * the rtc interrupt is tied to PMIC_PWRON,
+	 * it will force reset the board if triggered.
+	 */
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+	};
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	status = "okay";
+};
+
+&led_work {
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+/*
+ * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+
+ * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys,
+ * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards.
+ */
+&sdmmc0 {
+	vmmc-supply = <&vcc3v3_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v0_usb>;
+};
+
+&vcc3v3_sd {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/rk3566-soquartz.dtsi b/dts/src/arm64/rockchip/rk3566-soquartz.dtsi
index 5bcd4be329..ce7165d7f1 100644
--- a/dts/src/arm64/rockchip/rk3566-soquartz.dtsi
+++ b/dts/src/arm64/rockchip/rk3566-soquartz.dtsi
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -28,6 +29,17 @@
 		#clock-cells = <0>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -143,6 +155,33 @@
 	status = "disabled";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -411,6 +450,10 @@
 	status = "disabled";
 };
 
+&i2s0_8ch {
+	status = "okay";
+};
+
 /*
  * i2s1_8ch is exposed on CM1 / Module1A
  * pin 24 - i2s1_sdi1_m1
@@ -444,6 +487,12 @@
 	};
 };
 
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
@@ -469,6 +518,15 @@
 		};
 	};
 
+	pcie {
+		pcie_clkreq_h: pcie-clkreq-h {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -614,3 +672,20 @@
 &usb_host0_xhci {
 	status = "disabled";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3568-odroid-m1.dts b/dts/src/arm64/rockchip/rk3568-odroid-m1.dts
new file mode 100644
index 0000000000..59ecf868db
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3568-odroid-m1.dts
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Hardkernel Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-M1";
+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c3;
+		i2c3 = &i2c0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: led-0 {
+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_power_pin>;
+		};
+		led_work: led-1 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_pin>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "Analog RK817";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&combphy1 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pin>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	fspi {
+		fspi_dual_io_pins: fspi-dual-io-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			/* external pullup to VCC3V3_SYS */
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_power_pin: led-power-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led_work_pin: led-work-pin {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset_pin: pcie-reset-pin {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rk809 {
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
+	pinctrl-0 = <&fspi_dual_io_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SPL";
+				reg = <0x0 0xe0000>;
+			};
+			partition@e0000 {
+				label = "U-Boot Env";
+				reg = <0xe0000 0x20000>;
+			};
+			partition@100000 {
+				label = "U-Boot";
+				reg = <0x100000 0x200000>;
+			};
+			partition@300000 {
+				label = "splash";
+				reg = <0x300000 0x100000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3568-rock-3a.dts b/dts/src/arm64/rockchip/rk3568-rock-3a.dts
index 539ef8cc77..a1c5fdf7d6 100644
--- a/dts/src/arm64/rockchip/rk3568-rock-3a.dts
+++ b/dts/src/arm64/rockchip/rk3568-rock-3a.dts
@@ -32,6 +32,13 @@
 		};
 	};
 
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -60,13 +67,55 @@
 		};
 	};
 
-	vcc12v_dcin: vcc12v-dcin {
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
 		regulator-boot-on;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator */
+	vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pi6c_03";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -79,7 +128,7 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc3v3_sys: vcc3v3-sys {
+	vcc3v3_sys: vcc3v3-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
 		regulator-always-on;
@@ -89,7 +138,7 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_sys: vcc5v0-sys {
+	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
@@ -99,7 +148,7 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_usb: vcc5v0-usb {
+	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
@@ -109,7 +158,7 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_usb_host: vcc5v0-usb-host {
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -144,7 +193,7 @@
 		vin-supply = <&vcc5v0_usb>;
 	};
 
-	vcc_cam: vcc-cam {
+	vcc_cam: vcc-cam-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
@@ -160,7 +209,7 @@
 		};
 	};
 
-	vcc_mipi: vcc-mipi {
+	vcc_mipi: vcc-mipi-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
@@ -207,16 +256,17 @@
 
 &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
-	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
-	assigned-clock-rates = <0>, <125000000>;
-	clock_in_out = "output";
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	clock_in_out = "input";
 	phy-handle = <&rgmii_phy1>;
 	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m1_miim
 		     &gmac1m1_tx_bus2
 		     &gmac1m1_rx_bus2
 		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
 		     &gmac1m1_rgmii_bus>;
 	status = "okay";
 };
@@ -525,6 +575,11 @@
 	status = "okay";
 };
 
+&i2s2_2ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -545,6 +600,19 @@
 	status = "okay";
 };
 
+&pcie30phy {
+	phy-supply = <&vcc3v3_pi6c_03>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2m1_pins>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	cam {
 		vcc_cam_en: vcc_cam_en {
@@ -604,6 +672,26 @@
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -648,12 +736,50 @@
 	status = "okay";
 };
 
+&sdmmc2 {
+	supports-sdio;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <0>;
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+		/* vddio comes from regulator on module, use IO bank voltage instead */
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/rockchip/rk356x.dtsi b/dts/src/arm64/rockchip/rk356x.dtsi
index 164708f1eb..5706c3e24f 100644
--- a/dts/src/arm64/rockchip/rk356x.dtsi
+++ b/dts/src/arm64/rockchip/rk356x.dtsi
@@ -1049,20 +1049,6 @@
 		status = "disabled";
 	};
 
-	spdif: spdif@fe460000 {
-		compatible = "rockchip,rk3568-spdif";
-		reg = <0x0 0xfe460000 0x0 0x1000>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "mclk", "hclk";
-		clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
-		dmas = <&dmac1 1>;
-		dma-names = "tx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spdifm0_tx>;
-		#sound-dai-cells = <0>;
-		status = "disabled";
-	};
-
 	i2s0_8ch: i2s@fe400000 {
 		compatible = "rockchip,rk3568-i2s-tdm";
 		reg = <0x0 0xfe400000 0x0 0x1000>;
@@ -1105,6 +1091,28 @@
 		status = "disabled";
 	};
 
+	i2s2_2ch: i2s@fe420000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe420000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+		assigned-clock-rates = <1188000000>;
+		clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 4>, <&dmac1 5>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S2_2CH>;
+		reset-names = "m";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2m0_sclktx
+				&i2s2m0_lrcktx
+				&i2s2m0_sdi
+				&i2s2m0_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	i2s3_2ch: i2s@fe430000 {
 		compatible = "rockchip,rk3568-i2s-tdm";
 		reg = <0x0 0xfe430000 0x0 0x1000>;
@@ -1142,6 +1150,20 @@
 		status = "disabled";
 	};
 
+	spdif: spdif@fe460000 {
+		compatible = "rockchip,rk3568-spdif";
+		reg = <0x0 0xfe460000 0x0 0x1000>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
+		dmas = <&dmac1 1>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm0_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	dmac0: dma-controller@fe530000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xfe530000 0x0 0x4000>;
diff --git a/dts/src/arm64/tesla/fsd-pinctrl.dtsi b/dts/src/arm64/tesla/fsd-pinctrl.dtsi
index d0abb9aa0e..e3852c9463 100644
--- a/dts/src/arm64/tesla/fsd-pinctrl.dtsi
+++ b/dts/src/arm64/tesla/fsd-pinctrl.dtsi
@@ -55,14 +55,14 @@
 		samsung,pins = "gpf5-0";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	ufs_refclk_out: ufs-refclk-out-pins {
 		samsung,pins = "gpf5-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
@@ -239,105 +239,105 @@
 		samsung,pins = "gpb6-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb6-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c0_bus: hs-i2c0-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c1_bus: hs-i2c1-bus-pins {
 		samsung,pins = "gpb0-2", "gpb0-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c2_bus: hs-i2c2-bus-pins {
 		samsung,pins = "gpb0-4", "gpb0-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c3_bus: hs-i2c3-bus-pins {
 		samsung,pins = "gpb0-6", "gpb0-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c4_bus: hs-i2c4-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c5_bus: hs-i2c5-bus-pins {
 		samsung,pins = "gpb1-2", "gpb1-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c6_bus: hs-i2c6-bus-pins {
 		samsung,pins = "gpb1-4", "gpb1-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c7_bus: hs-i2c7-bus-pins {
 		samsung,pins = "gpb1-6", "gpb1-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart0_data: uart0-data-pins {
 		samsung,pins = "gpb7-0", "gpb7-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data-pins {
 		samsung,pins = "gpb7-4", "gpb7-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
diff --git a/dts/src/arm64/tesla/fsd-pinctrl.h b/dts/src/arm64/tesla/fsd-pinctrl.h
index 6ffbda3624..c397d02208 100644
--- a/dts/src/arm64/tesla/fsd-pinctrl.h
+++ b/dts/src/arm64/tesla/fsd-pinctrl.h
@@ -16,9 +16,9 @@
 #define FSD_PIN_PULL_UP			3
 
 #define FSD_PIN_DRV_LV1			0
-#define FSD_PIN_DRV_LV2			2
-#define FSD_PIN_DRV_LV3			1
-#define FSD_PIN_DRV_LV4			3
+#define FSD_PIN_DRV_LV2			1
+#define FSD_PIN_DRV_LV4			2
+#define FSD_PIN_DRV_LV6			3
 
 #define FSD_PIN_FUNC_INPUT		0
 #define FSD_PIN_FUNC_OUTPUT		1
diff --git a/dts/src/arm64/ti/k3-am62-main.dtsi b/dts/src/arm64/ti/k3-am62-main.dtsi
index 0366047636..072903649d 100644
--- a/dts/src/arm64/ti/k3-am62-main.dtsi
+++ b/dts/src/arm64/ti/k3-am62-main.dtsi
@@ -192,6 +192,102 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
@@ -199,6 +295,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -208,6 +305,7 @@
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 152 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -217,6 +315,7 @@
 		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -226,6 +325,7 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 154 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -235,6 +335,7 @@
 		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 155 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -244,6 +345,7 @@
 		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 156 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -253,6 +355,7 @@
 		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 158 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@20000000 {
@@ -264,6 +367,7 @@
 		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 102 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@20010000 {
@@ -275,6 +379,7 @@
 		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 103 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@20020000 {
@@ -286,6 +391,7 @@
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 104 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@20030000 {
@@ -297,6 +403,7 @@
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@20100000 {
@@ -307,6 +414,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 172 0>;
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -317,6 +425,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 173 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -327,6 +436,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 174 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
@@ -393,6 +503,7 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x9>;
 		ti,otap-del-sel-hs200 = <0x6>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -416,6 +527,7 @@
 		ti,itap-del-sel-sdr25 = <0x0>;
 		ti,clkbuf-sel = <0x7>;
 		bus-width = <4>;
+		status = "disabled";
 	};
 
 	sdhci2: mmc@fa20000 {
@@ -438,6 +550,7 @@
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	fss: bus@fc00000 {
@@ -462,6 +575,7 @@
 			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 	};
 
@@ -520,6 +634,7 @@
 			clocks = <&k3_clks 13 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
@@ -557,6 +672,7 @@
 		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 51 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap1: pwm@23110000 {
@@ -566,6 +682,7 @@
 		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 52 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap2: pwm@23120000 {
@@ -575,6 +692,7 @@
 		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 53 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_mcan0: can@20701000 {
@@ -589,6 +707,7 @@
 			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	epwm0: pwm@23000000 {
@@ -598,6 +717,7 @@
 		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm1: pwm@23010000 {
@@ -607,6 +727,7 @@
 		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm2: pwm@23020000 {
@@ -616,5 +737,6 @@
 		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 };
diff --git a/dts/src/arm64/ti/k3-am62-mcu.dtsi b/dts/src/arm64/ti/k3-am62-mcu.dtsi
index f56c803560..a427231527 100644
--- a/dts/src/arm64/ti/k3-am62-mcu.dtsi
+++ b/dts/src/arm64/ti/k3-am62-mcu.dtsi
@@ -14,6 +14,51 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
 	mcu_uart0: serial@4a00000 {
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x04a00000 0x00 0x100>;
@@ -21,6 +66,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@4900000 {
@@ -32,6 +78,7 @@
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 106 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	mcu_spi0: spi@4b00000 {
@@ -42,6 +89,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 147 0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@4b10000 {
@@ -52,6 +100,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 148 0>;
+		status = "disabled";
 	};
 
 	mcu_gpio_intr: interrupt-controller@4210000 {
diff --git a/dts/src/arm64/ti/k3-am62-wakeup.dtsi b/dts/src/arm64/ti/k3-am62-wakeup.dtsi
index 4090134676..38dced6b4f 100644
--- a/dts/src/arm64/ti/k3-am62-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-am62-wakeup.dtsi
@@ -26,16 +26,18 @@
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@2b200000 {
 		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02b200000 0x00 0x100>;
+		reg = <0x00 0x2b200000 0x00 0x100>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 };
diff --git a/dts/src/arm64/ti/k3-am625-sk.dts b/dts/src/arm64/ti/k3-am625-sk.dts
index 93a5f0817e..4f179b146c 100644
--- a/dts/src/arm64/ti/k3-am625-sk.dts
+++ b/dts/src/arm64/ti/k3-am625-sk.dts
@@ -31,6 +31,15 @@
 		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
 	};
 
+	opp-table {
+		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* 2G RAM */
@@ -282,11 +291,8 @@
 	status = "reserved";
 };
 
-&mcu_uart0 {
-	status = "disabled";
-};
-
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -296,41 +302,15 @@
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&mcu_i2c0 {
-	status = "disabled";
-};
-
-&wkup_i2c0 {
-	status = "disabled";
-};
-
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -363,15 +343,8 @@
 	};
 };
 
-&main_i2c2 {
-	status = "disabled";
-};
-
-&main_i2c3 {
-	status = "disabled";
-};
-
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -380,6 +353,7 @@
 
 &sdhci1 {
 	/* SD/MMC */
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vdd_sd_dv>;
 	pinctrl-names = "default";
@@ -390,8 +364,7 @@
 
 &cpsw3g {
 	pinctrl-names = "default";
-	pinctrl-0 = <&main_mdio1_pins_default
-		     &main_rgmii1_pins_default
+	pinctrl-0 = <&main_rgmii1_pins_default
 		     &main_rgmii2_pins_default>;
 };
 
@@ -406,6 +379,10 @@
 };
 
 &cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -429,6 +406,7 @@
 };
 
 &ospi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
@@ -486,31 +464,3 @@
 		};
 	};
 };
-
-&ecap0 {
-	status = "disabled";
-};
-
-&ecap1 {
-	status = "disabled";
-};
-
-&ecap2 {
-	status = "disabled";
-};
-
-&main_mcan0 {
-	status = "disabled";
-};
-
-&epwm0 {
-	status = "disabled";
-};
-
-&epwm1 {
-	status = "disabled";
-};
-
-&epwm2 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-am625.dtsi b/dts/src/arm64/ti/k3-am625.dtsi
index 887f31c23f..cea2cc7de5 100644
--- a/dts/src/arm64/ti/k3-am625.dtsi
+++ b/dts/src/arm64/ti/k3-am625.dtsi
@@ -48,6 +48,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 135 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,6 +64,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 136 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -76,6 +80,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 137 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -90,6 +96,51 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&wkup_conf>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
 		};
 	};
 
diff --git a/dts/src/arm64/ti/k3-am62a-wakeup.dtsi b/dts/src/arm64/ti/k3-am62a-wakeup.dtsi
index 99afac40e8..81d984414f 100644
--- a/dts/src/arm64/ti/k3-am62a-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-am62a-wakeup.dtsi
@@ -31,7 +31,7 @@
 
 	wkup_i2c0: i2c@2b200000 {
 		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02b200000 0x00 0x100>;
+		reg = <0x00 0x2b200000 0x00 0x100>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/dts/src/arm64/ti/k3-am64-main.dtsi b/dts/src/arm64/ti/k3-am64-main.dtsi
index d6aa23681b..5e8036f32d 100644
--- a/dts/src/arm64/ti/k3-am64-main.dtsi
+++ b/dts/src/arm64/ti/k3-am64-main.dtsi
@@ -237,6 +237,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -248,6 +249,7 @@
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 152 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -259,6 +261,7 @@
 		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -270,6 +273,7 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 154 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -281,6 +285,7 @@
 		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 155 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -292,6 +297,7 @@
 		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 156 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -303,6 +309,7 @@
 		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 158 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@20000000 {
@@ -314,6 +321,7 @@
 		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 102 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@20010000 {
@@ -325,6 +333,7 @@
 		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 103 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@20020000 {
@@ -336,6 +345,7 @@
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 104 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@20030000 {
@@ -347,6 +357,7 @@
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@20100000 {
@@ -359,6 +370,7 @@
 		clocks = <&k3_clks 141 0>;
 		dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>;
 		dma-names = "tx0", "rx0";
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -369,6 +381,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 142 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -379,6 +392,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 143 0>;
+		status = "disabled";
 	};
 
 	main_spi3: spi@20130000 {
@@ -389,6 +403,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 144 0>;
+		status = "disabled";
 	};
 
 	main_spi4: spi@20140000 {
@@ -399,6 +414,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 145 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
@@ -536,6 +552,7 @@
 			clocks = <&k3_clks 13 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
@@ -612,7 +629,7 @@
 		assigned-clocks = <&k3_clks 0 0>;
 		assigned-clock-parents = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -855,6 +872,7 @@
 		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
 			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
+		status = "disabled";
 	};
 
 	pcie0_ep: pcie-ep@f102000 {
@@ -873,6 +891,7 @@
 		clocks = <&k3_clks 114 0>;
 		clock-names = "fck";
 		max-functions = /bits/ 8 <1>;
+		status = "disabled";
 	};
 
 	epwm0: pwm@23000000 {
@@ -882,6 +901,7 @@
 		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm1: pwm@23010000 {
@@ -891,6 +911,7 @@
 		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm2: pwm@23020000 {
@@ -900,6 +921,7 @@
 		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm3: pwm@23030000 {
@@ -909,6 +931,7 @@
 		power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm4: pwm@23040000 {
@@ -918,6 +941,7 @@
 		power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm5: pwm@23050000 {
@@ -927,6 +951,7 @@
 		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm6: pwm@23060000 {
@@ -936,6 +961,7 @@
 		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm7: pwm@23070000 {
@@ -945,6 +971,7 @@
 		power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm8: pwm@23080000 {
@@ -954,6 +981,7 @@
 		power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ecap0: pwm@23100000 {
@@ -963,6 +991,7 @@
 		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 51 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap1: pwm@23110000 {
@@ -972,6 +1001,7 @@
 		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 52 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap2: pwm@23120000 {
@@ -981,6 +1011,7 @@
 		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 53 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_rti0: watchdog@e000000 {
@@ -1138,6 +1169,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1278,6 +1310,7 @@
 			clocks = <&k3_clks 82 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1293,6 +1326,7 @@
 			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan1: can@20711000 {
@@ -1307,6 +1341,7 @@
 			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	crypto: crypto@40900000 {
@@ -1324,7 +1359,6 @@
 			compatible = "inside-secure,safexcel-eip76";
 			reg = <0x00 0x40910000 0x00 0x7d>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&k3_clks 133 1>;
 			status = "disabled"; /* Used by OP-TEE */
 		};
 	};
@@ -1334,8 +1368,8 @@
 		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 80 0>;
 		clock-names = "fck";
-		reg = <0x00 0x03b000000 0x00 0x400>,
-		      <0x00 0x050000000 0x00 0x8000000>;
+		reg = <0x00 0x3b000000 0x00 0x400>,
+		      <0x00 0x50000000 0x00 0x8000000>;
 		reg-names = "cfg", "data";
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		gpmc,num-cs = <3>;
@@ -1346,6 +1380,7 @@
 		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		status = "disabled";
 	};
 
 	elm0: ecc@25010000 {
@@ -1355,5 +1390,6 @@
 		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 54 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 };
diff --git a/dts/src/arm64/ti/k3-am64-mcu.dtsi b/dts/src/arm64/ti/k3-am64-mcu.dtsi
index 02d4285acb..38ddf0b3b8 100644
--- a/dts/src/arm64/ti/k3-am64-mcu.dtsi
+++ b/dts/src/arm64/ti/k3-am64-mcu.dtsi
@@ -14,6 +14,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart1: serial@4a10000 {
@@ -24,6 +25,7 @@
 		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 160 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@4900000 {
@@ -35,6 +37,7 @@
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 106 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@4910000 {
@@ -46,6 +49,7 @@
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	mcu_spi0: spi@4b00000 {
@@ -56,6 +60,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 147 0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@4b10000 {
@@ -66,6 +71,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 148 0>;
+		status = "disabled";
 	};
 
 	mcu_gpio_intr: interrupt-controller@4210000 {
diff --git a/dts/src/arm64/ti/k3-am642-evm.dts b/dts/src/arm64/ti/k3-am642-evm.dts
index 5cf913860f..39feea78a0 100644
--- a/dts/src/arm64/ti/k3-am642-evm.dts
+++ b/dts/src/arm64/ti/k3-am642-evm.dts
@@ -325,6 +325,7 @@
 };
 
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -334,35 +335,8 @@
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&mcu_uart0 {
-	status = "disabled";
-};
-
-&mcu_uart1 {
-	status = "disabled";
-};
-
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -405,23 +379,8 @@
 	status = "reserved";
 };
 
-&mcu_i2c0 {
-	status = "disabled";
-};
-
-&mcu_i2c1 {
-	status = "disabled";
-};
-
-&mcu_spi0 {
-	status = "disabled";
-};
-
-&mcu_spi1 {
-	status = "disabled";
-};
-
 &main_spi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi0_pins_default>;
 	ti,pindir-d0-out-d1-in;
@@ -466,8 +425,7 @@
 
 &cpsw3g {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mdio1_pins_default
-		     &rgmii1_pins_default
+	pinctrl-0 = <&rgmii1_pins_default
 		     &rgmii2_pins_default>;
 };
 
@@ -482,6 +440,10 @@
 };
 
 &cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -594,6 +556,7 @@
 };
 
 &pcie0_rc {
+	status = "okay";
 	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
 	phys = <&serdes0_pcie_link>;
 	phy-names = "pcie-phy";
@@ -604,83 +567,25 @@
 	phys = <&serdes0_pcie_link>;
 	phy-names = "pcie-phy";
 	num-lanes = <1>;
-	status = "disabled";
 };
 
 &ecap0 {
+	status = "okay";
 	/* PWM is available on Pin 1 of header J12 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_ecap0_pins_default>;
 };
 
-&ecap1 {
-	status = "disabled";
-};
-
-&ecap2 {
-	status = "disabled";
-};
-
-&epwm0 {
-	status = "disabled";
-};
-
-&epwm1 {
-	status = "disabled";
-};
-
-&epwm2 {
-	status = "disabled";
-};
-
-&epwm3 {
-	status = "disabled";
-};
-
-&epwm4 {
-	status = "disabled";
-};
-
-&epwm5 {
-	status = "disabled";
-};
-
-&epwm6 {
-	status = "disabled";
-};
-
-&epwm7 {
-	status = "disabled";
-};
-
-&epwm8 {
-	status = "disabled";
-};
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
 &main_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan0_pins_default>;
 	phys = <&transceiver1>;
 };
 
 &main_mcan1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
-
-&gpmc0 {
-	status = "disabled";
-};
-
-&elm0 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-am642-sk.dts b/dts/src/arm64/ti/k3-am642-sk.dts
index 738d0cf6c4..2e2d40da36 100644
--- a/dts/src/arm64/ti/k3-am642-sk.dts
+++ b/dts/src/arm64/ti/k3-am642-sk.dts
@@ -338,15 +338,8 @@
 	};
 };
 
-&mcu_uart0 {
-	status = "disabled";
-};
-
-&mcu_uart1 {
-	status = "disabled";
-};
-
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -356,35 +349,8 @@
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&mcu_i2c0 {
-	status = "disabled";
-};
-
-&mcu_i2c1 {
-	status = "disabled";
-};
-
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -409,18 +375,6 @@
 	};
 };
 
-&main_i2c3 {
-	status = "disabled";
-};
-
-&mcu_spi0 {
-	status = "disabled";
-};
-
-&mcu_spi1 {
-	status = "disabled";
-};
-
 /* mcu_gpio0 is reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
@@ -485,8 +439,7 @@
 
 &cpsw3g {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mdio1_pins_default
-		     &rgmii1_pins_default
+	pinctrl-0 = <&rgmii1_pins_default
 		     &rgmii2_pins_default>;
 };
 
@@ -501,6 +454,10 @@
 };
 
 &cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -603,92 +560,9 @@
 			<&main_r5fss1_core1_memory_region>;
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
 &ecap0 {
+	status = "okay";
 	/* PWM is available on Pin 1 of header J3 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_ecap0_pins_default>;
 };
-
-&ecap1 {
-	status = "disabled";
-};
-
-&ecap2 {
-	status = "disabled";
-};
-
-&epwm0 {
-	status = "disabled";
-};
-
-&epwm1 {
-	status = "disabled";
-};
-
-&epwm2 {
-	status = "disabled";
-};
-
-&epwm3 {
-	status = "disabled";
-};
-
-&epwm4 {
-	/*
-	 * EPWM4_A, EPWM4_B is available on Pin 32 and 33 on J4 (RPi hat)
-	 * But RPi Hat will be used for other use cases, so marking epwm4 as disabled.
-	 */
-	status = "disabled";
-};
-
-&epwm5 {
-	/*
-	 * EPWM5_A, EPWM5_B is available on Pin 29 and 31 on J4 (RPi hat)
-	 * But RPi Hat will be used for other use cases, so marking epwm5 as disabled.
-	 */
-	status = "disabled";
-};
-
-&epwm6 {
-	status = "disabled";
-};
-
-&epwm7 {
-	status = "disabled";
-};
-
-&epwm8 {
-	status = "disabled";
-};
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
-&main_mcan0 {
-	status = "disabled";
-};
-
-&main_mcan1 {
-	status = "disabled";
-};
-
-&gpmc0 {
-	status = "disabled";
-};
-
-&elm0 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi
index 32b7972375..3cced26b52 100644
--- a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi
+++ b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi
@@ -360,15 +360,13 @@
 };
 
 &main_uart1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
 &mcu_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&arduino_uart_pins_default>;
 };
@@ -413,12 +411,14 @@
 };
 
 &wkup_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_i2c0_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &mcu_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -478,6 +478,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -495,18 +496,21 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c2_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c3 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
 	clock-frequency = <400000>;
@@ -546,6 +550,7 @@
 };
 
 &ecap0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ecap0_pins_default>;
 };
@@ -570,6 +575,7 @@
 };
 
 &mcu_spi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_spi0_pins_default>;
 
@@ -626,15 +632,8 @@
 	};
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
 &pcie1_rc {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&minipcie_pins_default>;
 
@@ -644,19 +643,8 @@
 	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
 };
 
-&m_can0 {
-	status = "disabled";
-};
-
-&m_can1 {
-	status = "disabled";
-};
-
-&pcie1_ep {
-	status = "disabled";
-};
-
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -666,6 +654,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
@@ -674,46 +663,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
@@ -725,27 +674,3 @@
 			<&mcu_r5fss0_core1_memory_region>;
 	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
 };
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
-&icssg2_mdio {
-	status = "disabled";
-};
-
-&mcasp0 {
-	status = "disabled";
-};
-
-&mcasp1 {
-	status = "disabled";
-};
-
-&mcasp2 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi
index 4005a73cfe..1adba2f2c1 100644
--- a/dts/src/arm64/ti/k3-am65-main.dtsi
+++ b/dts/src/arm64/ti/k3-am65-main.dtsi
@@ -91,6 +91,7 @@
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -99,6 +100,7 @@
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -107,6 +109,7 @@
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	crypto: crypto@4e00000 {
@@ -120,17 +123,33 @@
 		dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
 				<&main_udmap 0x4003>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
 			reg = <0x0 0x4e10000 0x0 0x7d>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&k3_clks 136 1>;
 			status = "disabled"; /* Used by OP-TEE */
 		};
 	};
 
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104200 0x0 0x30>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001ff>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104280 0x0 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+	};
+
 	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		reg = <0x0 0x11c000 0x0 0x2e4>;
@@ -156,6 +175,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 110 1>;
 		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@2010000 {
@@ -167,6 +187,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 111 1>;
 		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -178,6 +199,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 112 1>;
 		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -189,6 +211,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 113 1>;
 		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	ecap0: pwm@3100000 {
@@ -198,6 +221,7 @@
 		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 39 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@2100000 {
@@ -210,6 +234,7 @@
 		#size-cells = <0>;
 		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
 		dma-names = "tx0", "rx0";
+		status = "disabled";
 	};
 
 	main_spi1: spi@2110000 {
@@ -222,6 +247,7 @@
 		#size-cells = <0>;
 		assigned-clocks = <&k3_clks 137 1>;
 		assigned-clock-rates = <48000000>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@2120000 {
@@ -232,6 +258,7 @@
 		power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	main_spi3: spi@2130000 {
@@ -242,6 +269,7 @@
 		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	main_spi4: spi@2140000 {
@@ -252,6 +280,151 @@
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 23 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 23 0>;
+		assigned-clock-parents = <&k3_clks 23 1>;
+		power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 24 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 24 0>;
+		assigned-clock-parents = <&k3_clks 24 1>;
+		power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 27 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 27 0>;
+		assigned-clock-parents = <&k3_clks 27 1>;
+		power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 28 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 28 0>;
+		assigned-clock-parents = <&k3_clks 28 1>;
+		power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 29 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 29 0>;
+		assigned-clock-parents = <&k3_clks 29 1>;
+		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 30 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 30 0>;
+		assigned-clock-parents = <&k3_clks 30 1>;
+		power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 31 0>;
+		assigned-clocks = <&k3_clks 31 0>;
+		assigned-clock-parents = <&k3_clks 31 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 32 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 32 0>;
+		assigned-clock-parents = <&k3_clks 32 1>;
+		power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 33 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 33 0>;
+		assigned-clock-parents = <&k3_clks 33 1>;
+		power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 34 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 34 0>;
+		assigned-clock-parents = <&k3_clks 34 1>;
+		power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 25 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 25 0>;
+		assigned-clock-parents = <&k3_clks 25 1>;
+		power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 26 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 26 0>;
+		assigned-clock-parents = <&k3_clks 26 1>;
+		power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
 	};
 
 	sdhci0: mmc@4f80000 {
@@ -342,7 +515,7 @@
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
 			compatible = "syscon";
-			reg = <0x0000041e0 0x14>;
+			reg = <0x000041e0 0x14>;
 		};
 
 		ehrpwm_tbclk: clock@4140 {
@@ -501,6 +674,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -510,6 +684,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -519,6 +694,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -528,6 +704,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -537,6 +714,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -546,6 +724,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -555,6 +734,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -564,6 +744,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -573,6 +754,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -582,6 +764,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -591,6 +774,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -600,6 +784,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		ringacc: ringacc@3c000000 {
@@ -707,6 +892,7 @@
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		device_type = "pci";
+		status = "disabled";
 	};
 
 	pcie0_ep: pcie-ep@5500000 {
@@ -720,6 +906,7 @@
 		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
 	};
 
 	pcie1_rc: pcie@5600000 {
@@ -740,6 +927,7 @@
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
 		device_type = "pci";
+		status = "disabled";
 	};
 
 	pcie1_ep: pcie-ep@5600000 {
@@ -753,6 +941,7 @@
 		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
 	};
 
 	mcasp0: mcasp@2b00000 {
@@ -770,6 +959,7 @@
 		clocks = <&k3_clks 104 0>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp1: mcasp@2b10000 {
@@ -787,6 +977,7 @@
 		clocks = <&k3_clks 105 0>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp2: mcasp@2b20000 {
@@ -804,6 +995,7 @@
 		clocks = <&k3_clks 106 0>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	cal: cal@6f03000 {
@@ -874,6 +1066,7 @@
 		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm1: pwm@3010000 {
@@ -883,6 +1076,7 @@
 		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm2: pwm@3020000 {
@@ -892,6 +1086,7 @@
 		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm3: pwm@3030000 {
@@ -901,6 +1096,7 @@
 		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm4: pwm@3040000 {
@@ -910,6 +1106,7 @@
 		power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm5: pwm@3050000 {
@@ -919,6 +1116,7 @@
 		power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	icssg0: icssg@b000000 {
@@ -1059,6 +1257,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1200,6 +1399,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1341,6 +1541,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi
index 8d592bf41d..5dfa31840e 100644
--- a/dts/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi
@@ -20,13 +20,32 @@
 		};
 	};
 
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x10>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000101>;
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000003>;
+	};
+
 	mcu_uart0: serial@40a00000 {
 		compatible = "ti,am654-uart";
-			reg = <0x00 0x40a00000 0x00 0x100>;
-			interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <96000000>;
-			current-speed = <115200>;
-			power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_ram: sram@41c00000 {
@@ -46,6 +65,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 114 1>;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_spi0: spi@40300000 {
@@ -56,6 +76,7 @@
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@40310000 {
@@ -66,6 +87,7 @@
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	mcu_spi2: spi@40320000 {
@@ -76,6 +98,7 @@
 		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	tscadc0: tscadc@40200000 {
@@ -85,7 +108,7 @@
 		clocks = <&k3_clks 0 2>;
 		assigned-clocks = <&k3_clks 0 2>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&mcu_udmap 0x7100>,
 			<&mcu_udmap 0x7101 >;
 		dma-names = "fifo0", "fifo1";
@@ -103,7 +126,7 @@
 		clocks = <&k3_clks 1 2>;
 		assigned-clocks = <&k3_clks 1 2>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&mcu_udmap 0x7102>,
 			<&mcu_udmap 0x7103>;
 		dma-names = "fifo0", "fifo1";
@@ -114,6 +137,51 @@
 		};
 	};
 
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		clocks = <&k3_clks 35 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		clocks = <&k3_clks 36 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		clocks = <&k3_clks 37 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		clocks = <&k3_clks 38 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
 	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
@@ -172,6 +240,7 @@
 			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	m_can1: mcan@40568000 {
@@ -187,6 +256,7 @@
 			     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	fss: fss@47000000 {
@@ -273,6 +343,7 @@
 			clocks = <&k3_clks 5 10>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
diff --git a/dts/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/src/arm64/ti/k3-am65-wakeup.dtsi
index fa11d71420..fd2b998ebd 100644
--- a/dts/src/arm64/ti/k3-am65-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-am65-wakeup.dtsi
@@ -54,6 +54,7 @@
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
 		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@42120000 {
@@ -65,6 +66,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 115 1>;
 		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	intr_wkup_gpio: interrupt-controller@42200000 {
diff --git a/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi b/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
index 4a9bf7d7c0..cd43fd11a5 100644
--- a/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/dts/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -50,6 +50,7 @@
 };
 
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts
index 5850582dd4..592ab2b54c 100644
--- a/dts/src/arm64/ti/k3-am654-base-board.dts
+++ b/dts/src/arm64/ti/k3-am654-base-board.dts
@@ -271,13 +271,20 @@
 	status = "reserved";
 };
 
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
 &wkup_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -296,7 +303,13 @@
 	};
 };
 
+&mcu_i2c0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -310,23 +323,27 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c2_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &ecap0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ecap0_pins_default>;
 };
 
 &main_spi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi0_pins_default>;
 	#address-cells = <1>;
@@ -398,31 +415,8 @@
 	status = "disabled";
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
-&pcie1_rc {
-	status = "disabled";
-};
-
-&pcie1_ep {
-	status = "disabled";
-};
-
-&m_can0 {
-	status = "disabled";
-};
-
-&m_can1 {
-	status = "disabled";
-};
-
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -432,6 +426,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
@@ -440,46 +435,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
@@ -512,10 +467,14 @@
 
 &mcu_cpsw {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
 };
 
 &davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -528,30 +487,6 @@
 	phy-handle = <&phy0>;
 };
 
-&mcasp0 {
-	status = "disabled";
-};
-
-&mcasp1 {
-	status = "disabled";
-};
-
-&mcasp2 {
-	status = "disabled";
-};
-
 &dss {
 	status = "disabled";
 };
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
-&icssg2_mdio {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
index d25e8b2618..0f67e1ec0f 100644
--- a/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/dts/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -50,7 +50,3 @@
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
-
-&main_uart0 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-j7200-common-proc-board.dts b/dts/src/arm64/ti/k3-j7200-common-proc-board.dts
index 7e8552fd2b..6240856e48 100644
--- a/dts/src/arm64/ti/k3-j7200-common-proc-board.dts
+++ b/dts/src/arm64/ti/k3-j7200-common-proc-board.dts
@@ -154,51 +154,27 @@
 	status = "reserved";
 };
 
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart0 {
+	status = "okay";
 	/* Shared with ATF on this platform */
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart2 {
 	/* MAIN UART 2 is used by R5F firmware */
 	status = "reserved";
 };
 
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart4 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart9 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
 &main_gpio2 {
 	status = "disabled";
 };
@@ -234,6 +210,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -261,6 +238,7 @@
  * The i2c1 of the CPB (as it is labeled) is not connected to j7200.
  */
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
diff --git a/dts/src/arm64/ti/k3-j7200-main.dtsi b/dts/src/arm64/ti/k3-j7200-main.dtsi
index 80a57916bc..138381f43c 100644
--- a/dts/src/arm64/ti/k3-j7200-main.dtsi
+++ b/dts/src/arm64/ti/k3-j7200-main.dtsi
@@ -142,6 +142,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -151,6 +152,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -160,6 +162,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -169,6 +172,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -178,6 +182,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -187,6 +192,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -196,6 +202,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -205,6 +212,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -214,6 +222,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -223,6 +232,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -232,6 +242,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -241,6 +252,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		main_ringacc: ringacc@3c000000 {
@@ -319,6 +331,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -330,6 +343,7 @@
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -341,6 +355,7 @@
 		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -352,6 +367,7 @@
 		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -363,6 +379,7 @@
 		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -374,6 +391,7 @@
 		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -385,6 +403,7 @@
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart7: serial@2870000 {
@@ -396,6 +415,7 @@
 		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart8: serial@2880000 {
@@ -407,6 +427,7 @@
 		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart9: serial@2890000 {
@@ -418,6 +439,7 @@
 		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@2000000 {
@@ -429,6 +451,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 187 1>;
 		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@2010000 {
@@ -440,6 +463,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 188 1>;
 		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -451,6 +475,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 189 1>;
 		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -462,6 +487,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 190 1>;
 		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c4: i2c@2040000 {
@@ -473,6 +499,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 191 1>;
 		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c5: i2c@2050000 {
@@ -484,6 +511,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 192 1>;
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c6: i2c@2060000 {
@@ -495,6 +523,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 193 1>;
 		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_sdhci0: mmc@4f80000 {
diff --git a/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
index e5be78a586..fe669deba4 100644
--- a/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
@@ -79,6 +79,7 @@
 		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -90,6 +91,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_gpio_intr: interrupt-controller@42200000 {
@@ -249,6 +251,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 194 1>;
 		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@40b10000 {
@@ -260,6 +263,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 195 1>;
 		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@42120000 {
@@ -271,6 +275,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 197 1>;
 		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	fss: syscon@47000000 {
@@ -325,7 +330,7 @@
 		clocks = <&k3_clks 0 1>;
 		assigned-clocks = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&main_udmap 0x7400>,
 			<&main_udmap 0x7401>;
 		dma-names = "fifo0", "fifo1";
@@ -386,7 +391,6 @@
 		dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>,
 		       <&mcu_udmap 0x7503>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@40910000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git a/dts/src/arm64/ti/k3-j7200-som-p0.dtsi b/dts/src/arm64/ti/k3-j7200-som-p0.dtsi
index 2d615c3e9f..fa44ed4c17 100644
--- a/dts/src/arm64/ti/k3-j7200-som-p0.dtsi
+++ b/dts/src/arm64/ti/k3-j7200-som-p0.dtsi
@@ -144,6 +144,7 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -158,6 +159,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -171,46 +173,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
diff --git a/dts/src/arm64/ti/k3-j721e-beagleboneai64.dts b/dts/src/arm64/ti/k3-j721e-beagleboneai64.dts
new file mode 100644
index 0000000000..37c24b077b
--- /dev/null
+++ b/dts/src/arm64/ti/k3-j721e-beagleboneai64.dts
@@ -0,0 +1,1055 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleboard.org/ai-64
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation
+ * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+/ {
+	compatible = "beagle,j721e-beagleboneai64", "ti,j721e";
+	model = "BeagleBoard.org BeagleBone AI-64";
+
+	aliases {
+		serial2 = &main_uart0;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &main_i2c6;
+		i2c2 = &main_i2c2;
+		i2c3 = &main_i2c4;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_pwr_pins_default>;
+
+		button-1 {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-2 {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&wkup_gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_default>;
+
+		led-0 {
+			gpios = <&main_gpio0 96 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			gpios = <&main_gpio0 95 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			gpios = <&main_gpio0 97 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CPU;
+			linux,default-trigger = "cpu";
+		};
+
+		led-3 {
+			gpios = <&main_gpio0 110 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc1";
+		};
+
+		led-4 {
+			gpios = <&main_gpio0 109 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_WLAN;
+			default-state = "off";
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-1 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-2 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pwr_en_pins_default>;
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&main_gpio0 82 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: regulator-4 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	dp_pwr_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp0_3v3_en_pins_default>;
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; /* DP0_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	led_pins_default: led-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */
+			J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x1bc, PIN_INPUT, 7) /* (V24) MDIO0_MDC.GPIO0_110 */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 7) /* (V26) MDIO0_MDIO.GPIO0_109 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	sd_pwr_en_pins_default: sd-pwr-en-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_3v3_en_pins_default:dp0-3v3-en-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */
+		>;
+	};
+
+	dp0_pins_default: dp0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */
+			J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */
+			J721E_IOPAD(0x138, PIN_INPUT, 7) /* (AE25) PRG0_PRU1_GPO14.GPIO0_77 */
+			J721E_IOPAD(0x13c, PIN_INPUT, 7) /* (AF29) PRG0_PRU1_GPO15.GPIO0_78 */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */
+			J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */
+			J721E_IOPAD(0x30, PIN_INPUT, 7) /* (AF24) PRG1_PRU0_GPO11.GPIO0_12 */
+			J721E_IOPAD(0x34, PIN_INPUT, 7) /* (AJ24) PRG1_PRU0_GPO12.GPIO0_13 */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+			J721E_IOPAD(0x74, PIN_INPUT, 7) /* (AC21) PRG1_PRU1_GPO7.GPIO0_28 */
+			J721E_IOPAD(0xa4, PIN_INPUT, 7) /* (AH22) PRG1_PRU1_GPO19.GPIO0_40 */
+		>;
+	};
+
+	csi0_gpio_pins_default: csi0-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+		>;
+	};
+
+	csi1_gpio_pins_default: csi1-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+		>;
+	};
+
+	pcie1_rst_pins_default: pcie1-rst-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	eeprom_wp_pins_default: eeprom-wp-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */
+			J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */
+			J721E_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K28) MCU_ADC0_AIN2 */
+			J721E_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (L28) MCU_ADC0_AIN3 */
+			J721E_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN4 */
+			J721E_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (K27) MCU_ADC0_AIN5 */
+			J721E_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K29) MCU_ADC0_AIN6 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */
+		>;
+	};
+
+	mikro_bus_pins_default: mikro-bus-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */
+			J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 7) /* SDA (D25) MCU_I3C0_SDA.WKUP_GPIO0_61 */
+			J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* SCL (G27) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 7) /* SCL (D26) MCU_I3C0_SCL.WKUP_GPIO0_60 */
+
+			J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* MOSI (F28) WKUP_GPIO0_2.MCU_SPI1_D1 */
+			J721E_WKUP_IOPAD(0xb4, PIN_INPUT, 7) /* MISO (F25) WKUP_GPIO0_1.MCU_SPI1_D0 */
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* CLK (F26) WKUP_GPIO0_0.MCU_SPI1_CLK */
+			J721E_WKUP_IOPAD(0xbc, PIN_INPUT, 7) /* CS (F27) WKUP_GPIO0_3.MCU_SPI1_CS0 */
+
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 7) /* RX (G22) MCU_OSPI1_D1.WKUP_GPIO0_33 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 7) /* TX (D23) MCU_OSPI1_D2.WKUP_GPIO0_34 */
+
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 7) /* INT (C23) MCU_OSPI1_D3.WKUP_GPIO0_35 */
+			J721E_WKUP_IOPAD(0x54, PIN_INPUT, 7) /* RST (E22) MCU_OSPI1_CSn1.WKUP_GPIO0_37 */
+			J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* PWM (H27) WKUP_GPIO0_11 */
+			J721E_WKUP_IOPAD(0xac, PIN_INPUT, 7) /* AN (C29) MCU_MCAN0_RX.WKUP_GPIO0_59 */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	sw_pwr_pins_default: sw-pwr-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_usbss1_pins_default: mcu-usbss1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by TIFS firmware. */
+	status = "reserved";
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD Card */
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci2 {
+	/* Unused */
+	status = "disabled";
+};
+
+&ospi0 {
+	/* Unused */
+	status = "disabled";
+};
+
+&ospi1 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default &csi1_gpio_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	/* BBB Header: P9.19 and P9.20 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c4 {
+	/* BBB Header: P9.24 and P9.26 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default &csi0_gpio_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c6 {
+	/* BBB Header: P9.17 and P9.18 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default &eeprom_wp_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+};
+
+&main_gpio2 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio3 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio4 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio5 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio6 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio7 {
+	/* Unused */
+	status = "disabled";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_adc0_pins_default &mcu_adc1_pins_default &mikro_bus_pins_default>;
+};
+
+&wkup_gpio1 {
+	/* Unused */
+	status = "disabled";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_IP4_UNUSED>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_LOW>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&serdes2 {
+	serdes2_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz2 2>;
+	};
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default &mcu_usbss1_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes2_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&tscadc0 {
+	/* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&tscadc1 {
+	/* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */
+	adc {
+		ti,adc-channels = <0>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+
+	assigned-clocks = <&k3_clks 152 1>,	/* VP 1 pixel clock */
+			  <&k3_clks 152 4>,	/* VP 2 pixel clock */
+			  <&k3_clks 152 9>,	/* VP 3 pixel clock */
+			  <&k3_clks 152 13>;	/* VP 4 pixel clock */
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* PLL19_HSDIV0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
+};
+
+&dss_ports {
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&pcie0_rc {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie1_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins_default>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	max-link-speed = <3>;
+	reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie2_rc {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "disabled";
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_ep {
+	status = "disabled";
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie2_ep {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie3_rc {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie3_ep {
+	/* Unused */
+	status = "disabled";
+};
+
+&icssg0_mdio {
+	/* Unused */
+	status = "disabled";
+};
+
+&icssg1_mdio {
+	/* Unused */
+	status = "disabled";
+};
+
+&ufs_wrapper {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
index b1691ac344..7db0603125 100644
--- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
+++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
@@ -96,7 +96,7 @@
 			 <3300000 0x1>;
 	};
 
-	sound0: sound@0 {
+	sound0: sound-0 {
 		compatible = "ti,j721e-cpb-audio";
 		model = "j721e-cpb";
 
@@ -370,38 +370,30 @@
 	status = "reserved";
 };
 
-&main_uart0 {
-	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
-};
-
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart0 {
+	status = "okay";
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart2 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart9 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart4 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_gpio2 {
@@ -537,6 +529,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -573,6 +566,7 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -598,6 +592,7 @@
 };
 
 &main_i2c3 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
 	clock-frequency = <400000>;
@@ -636,6 +631,7 @@
 };
 
 &main_i2c6 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c6_pins_default>;
 	clock-frequency = <400000>;
@@ -713,47 +709,8 @@
 	};
 };
 
-&mcasp0 {
-	status = "disabled";
-};
-
-&mcasp1 {
-	status = "disabled";
-};
-
-&mcasp2 {
-	status = "disabled";
-};
-
-&mcasp3 {
-	status = "disabled";
-};
-
-&mcasp4 {
-	status = "disabled";
-};
-
-&mcasp5 {
-	status = "disabled";
-};
-
-&mcasp6 {
-	status = "disabled";
-};
-
-&mcasp7 {
-	status = "disabled";
-};
-
-&mcasp8 {
-	status = "disabled";
-};
-
-&mcasp9 {
-	status = "disabled";
-};
-
 &mcasp10 {
+	status = "okay";
 	#sound-dai-cells = <0>;
 
 	pinctrl-names = "default";
@@ -771,10 +728,6 @@
 	rx-num-evt = <0>;
 };
 
-&mcasp11 {
-	status = "disabled";
-};
-
 &cmn_refclk1 {
 	clock-frequency = <100000000>;
 };
@@ -925,73 +878,29 @@
 };
 
 &mcu_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan0_pins_default>;
 	phys = <&transceiver1>;
 };
 
 &mcu_mcan1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
 
 &main_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan0_pins_default>;
 	phys = <&transceiver3>;
 };
 
-&main_mcan1 {
-	status = "disabled";
-};
-
 &main_mcan2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan2_pins_default>;
 	phys = <&transceiver4>;
 };
-
-&main_mcan3 {
-	status = "disabled";
-};
-
-&main_mcan4 {
-	status = "disabled";
-};
-
-&main_mcan5 {
-	status = "disabled";
-};
-
-&main_mcan6 {
-	status = "disabled";
-};
-
-&main_mcan7 {
-	status = "disabled";
-};
-
-&main_mcan8 {
-	status = "disabled";
-};
-
-&main_mcan9 {
-	status = "disabled";
-};
-
-&main_mcan10 {
-	status = "disabled";
-};
-
-&main_mcan11 {
-	status = "disabled";
-};
-
-&main_mcan12 {
-	status = "disabled";
-};
-
-&main_mcan13 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi
index 917c9dc99e..c935622f01 100644
--- a/dts/src/arm64/ti/k3-j721e-main.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-main.dtsi
@@ -66,7 +66,73 @@
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
 					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
-	    };
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3000000 0x00 0x100>;
+		power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 83 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3010000 0x00 0x100>;
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 84 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3020000 0x00 0x100>;
+		power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 85 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3030000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3040000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3050000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	gic500: interrupt-controller@1800000 {
@@ -176,6 +242,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -185,6 +252,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -194,6 +262,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -203,6 +272,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -212,6 +282,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -221,6 +292,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -230,6 +302,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -239,6 +312,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -248,6 +322,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -257,6 +332,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -266,6 +342,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -275,6 +352,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		main_ringacc: ringacc@3c000000 {
@@ -337,13 +415,11 @@
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
 			reg = <0x0 0x4e10000 0x0 0x7d>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&k3_clks 264 2>;
 		};
 	};
 
@@ -840,6 +916,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -851,6 +928,7 @@
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -862,6 +940,7 @@
 		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -873,6 +952,7 @@
 		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -884,6 +964,7 @@
 		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -895,6 +976,7 @@
 		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -906,6 +988,7 @@
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart7: serial@2870000 {
@@ -917,6 +1000,7 @@
 		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart8: serial@2880000 {
@@ -928,6 +1012,7 @@
 		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart9: serial@2890000 {
@@ -939,6 +1024,7 @@
 		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_gpio0: gpio@600000 {
@@ -1219,6 +1305,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 187 0>;
 		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@2010000 {
@@ -1230,6 +1317,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 188 0>;
 		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -1241,6 +1329,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 189 0>;
 		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -1252,6 +1341,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 190 0>;
 		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c4: i2c@2040000 {
@@ -1263,6 +1353,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 191 0>;
 		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c5: i2c@2050000 {
@@ -1274,6 +1365,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 192 0>;
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c6: i2c@2060000 {
@@ -1285,6 +1377,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 193 0>;
 		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	ufs_wrapper: ufs-wrapper@4e80000 {
@@ -1408,6 +1501,7 @@
 		clocks = <&k3_clks 174 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp1: mcasp@2b10000 {
@@ -1425,6 +1519,7 @@
 		clocks = <&k3_clks 175 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp2: mcasp@2b20000 {
@@ -1442,6 +1537,7 @@
 		clocks = <&k3_clks 176 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp3: mcasp@2b30000 {
@@ -1459,6 +1555,7 @@
 		clocks = <&k3_clks 177 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp4: mcasp@2b40000 {
@@ -1476,6 +1573,7 @@
 		clocks = <&k3_clks 178 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp5: mcasp@2b50000 {
@@ -1493,6 +1591,7 @@
 		clocks = <&k3_clks 179 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp6: mcasp@2b60000 {
@@ -1510,6 +1609,7 @@
 		clocks = <&k3_clks 180 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp7: mcasp@2b70000 {
@@ -1527,6 +1627,7 @@
 		clocks = <&k3_clks 181 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp8: mcasp@2b80000 {
@@ -1544,6 +1645,7 @@
 		clocks = <&k3_clks 182 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp9: mcasp@2b90000 {
@@ -1561,6 +1663,7 @@
 		clocks = <&k3_clks 183 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp10: mcasp@2ba0000 {
@@ -1578,6 +1681,7 @@
 		clocks = <&k3_clks 184 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp11: mcasp@2bb0000 {
@@ -1595,6 +1699,7 @@
 		clocks = <&k3_clks 185 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	watchdog0: watchdog@2200000 {
@@ -2027,6 +2132,7 @@
 			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan1: can@2711000 {
@@ -2041,6 +2147,7 @@
 			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan2: can@2721000 {
@@ -2055,6 +2162,7 @@
 			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan3: can@2731000 {
@@ -2069,6 +2177,7 @@
 			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan4: can@2741000 {
@@ -2083,6 +2192,7 @@
 			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan5: can@2751000 {
@@ -2097,6 +2207,7 @@
 			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan6: can@2761000 {
@@ -2111,6 +2222,7 @@
 			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan7: can@2771000 {
@@ -2125,6 +2237,7 @@
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan8: can@2781000 {
@@ -2139,6 +2252,7 @@
 			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan9: can@2791000 {
@@ -2153,6 +2267,7 @@
 			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan10: can@27a1000 {
@@ -2167,6 +2282,7 @@
 			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan11: can@27b1000 {
@@ -2181,6 +2297,7 @@
 			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan12: can@27c1000 {
@@ -2195,6 +2312,7 @@
 			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan13: can@27d1000 {
@@ -2209,5 +2327,6 @@
 			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 };
diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index df08724bbf..8ac78034d5 100644
--- a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
@@ -79,6 +79,7 @@
 		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -90,6 +91,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_gpio_intr: interrupt-controller@42200000 {
@@ -145,6 +147,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 194 0>;
 		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@40b10000 {
@@ -156,6 +159,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 195 0>;
 		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@42120000 {
@@ -167,6 +171,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 197 0>;
 		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	fss: fss@47000000 {
@@ -216,7 +221,7 @@
 		clocks = <&k3_clks 0 1>;
 		assigned-clocks = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&main_udmap 0x7400>,
 			<&main_udmap 0x7401>;
 		dma-names = "fifo0", "fifo1";
@@ -235,7 +240,7 @@
 		clocks = <&k3_clks 1 1>;
 		assigned-clocks = <&k3_clks 1 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&main_udmap 0x7402>,
 			<&main_udmap 0x7403>;
 		dma-names = "fifo0", "fifo1";
@@ -403,6 +408,7 @@
 			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	mcu_mcan1: can@40568000 {
@@ -417,5 +423,6 @@
 			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 };
diff --git a/dts/src/arm64/ti/k3-j721e-sk.dts b/dts/src/arm64/ti/k3-j721e-sk.dts
index 80358cba69..4640d280c8 100644
--- a/dts/src/arm64/ti/k3-j721e-sk.dts
+++ b/dts/src/arm64/ti/k3-j721e-sk.dts
@@ -400,6 +400,47 @@
 			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
 		>;
 	};
+
+	main_i2c5_pins_default: main-i2c5-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
+			J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
+			J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+			J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
+			J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+			J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+			J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
+			J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
+			J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
+			J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
+			J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
+			J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
+			J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
+			J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
+			J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
+			J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */
+			J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */
+			J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */
+			J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */
+		>;
+	};
+
+	rpi_header_gpio1_pins_default: rpi-header-gpio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -475,46 +516,22 @@
 	status = "reserved";
 };
 
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	/* Shared with ATF on this platform */
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
-&main_uart2 {
-	/* Brought out on RPi header */
-	status = "disabled";
-};
-
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart9 {
-	/* Brought out on M.2 E Key */
-	status = "disabled";
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_sdhci0 {
@@ -561,6 +578,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -588,18 +606,15 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
 	clock-frequency = <100000>;
 };
 
-&main_i2c2 {
-	/* Unused */
-	status = "disabled";
-};
-
 &main_i2c3 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
 	clock-frequency = <400000>;
@@ -626,19 +641,22 @@
 	};
 };
 
-&main_i2c4 {
-	/* Unused */
-	status = "disabled";
-};
-
 &main_i2c5 {
 	/* Brought out on RPi Header */
-	status = "disabled";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
 };
 
-&main_i2c6 {
-	/* Unused */
-	status = "disabled";
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
 };
 
 &main_gpio2 {
@@ -837,66 +855,6 @@
 	};
 };
 
-&mcasp0 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp1 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp2 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp3 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp4 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp5 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp6 {
-	/* Brought out on RPi header */
-	status = "disabled";
-};
-
-&mcasp7 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp8 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp9 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp10 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp11 {
-	/* Brought out on M.2 E Key */
-	status = "disabled";
-};
-
 &serdes0 {
 	serdes0_pcie_link: phy@0 {
 		reg = <0>;
@@ -984,6 +942,7 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -998,6 +957,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -1012,6 +972,7 @@
 };
 
 &mailbox0_cluster2 {
+	status = "okay";
 	interrupts = <428>;
 
 	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
@@ -1026,6 +987,7 @@
 };
 
 &mailbox0_cluster3 {
+	status = "okay";
 	interrupts = <424>;
 
 	mbox_c66_0: mbox-c66-0 {
@@ -1040,6 +1002,7 @@
 };
 
 &mailbox0_cluster4 {
+	status = "okay";
 	interrupts = <420>;
 
 	mbox_c71_0: mbox-c71-0 {
@@ -1048,34 +1011,6 @@
 	};
 };
 
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
diff --git a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi
index e36335232c..e289d5b443 100644
--- a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi
@@ -186,6 +186,7 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -200,6 +201,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -214,6 +216,7 @@
 };
 
 &mailbox0_cluster2 {
+	status = "okay";
 	interrupts = <428>;
 
 	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
@@ -228,6 +231,7 @@
 };
 
 &mailbox0_cluster3 {
+	status = "okay";
 	interrupts = <424>;
 
 	mbox_c66_0: mbox-c66-0 {
@@ -242,6 +246,7 @@
 };
 
 &mailbox0_cluster4 {
+	status = "okay";
 	interrupts = <420>;
 
 	mbox_c71_0: mbox-c71-0 {
@@ -250,34 +255,6 @@
 	};
 };
 
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
diff --git a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
index b210cc07c5..a7aa6cf08a 100644
--- a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
+++ b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
@@ -219,49 +219,19 @@
 	status = "reserved";
 };
 
-&main_uart0 {
-	status = "disabled";
-};
-
-&main_uart1 {
-	status = "disabled";
-};
-
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&main_uart7 {
-	status = "disabled";
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_uart8 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart8_pins_default>;
 	/* Shared with TFA on this platform */
 	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
 };
 
-&main_uart9 {
-	status = "disabled";
-};
-
 &main_i2c0 {
 	clock-frequency = <400000>;
 
@@ -291,30 +261,6 @@
 	};
 };
 
-&main_i2c1 {
-	status = "disabled";
-};
-
-&main_i2c2 {
-	status = "disabled";
-};
-
-&main_i2c3 {
-	status = "disabled";
-};
-
-&main_i2c4 {
-	status = "disabled";
-};
-
-&main_i2c5 {
-	status = "disabled";
-};
-
-&main_i2c6 {
-	status = "disabled";
-};
-
 &main_sdhci0 {
 	/* eMMC */
 	non-removable;
@@ -351,81 +297,15 @@
 };
 
 &mcu_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan0_pins_default>;
 	phys = <&transceiver1>;
 };
 
 &mcu_mcan1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
-
-&main_mcan0 {
-	status = "disabled";
-};
-
-&main_mcan1 {
-	status = "disabled";
-};
-
-&main_mcan2 {
-	status = "disabled";
-};
-
-&main_mcan3 {
-	status = "disabled";
-};
-
-&main_mcan4 {
-	status = "disabled";
-};
-
-&main_mcan5 {
-	status = "disabled";
-};
-
-&main_mcan6 {
-	status = "disabled";
-};
-
-&main_mcan7 {
-	status = "disabled";
-};
-
-&main_mcan8 {
-	status = "disabled";
-};
-
-&main_mcan9 {
-	status = "disabled";
-};
-
-&main_mcan10 {
-	status = "disabled";
-};
-
-&main_mcan11 {
-	status = "disabled";
-};
-
-&main_mcan12 {
-	status = "disabled";
-};
-
-&main_mcan13 {
-	status = "disabled";
-};
-
-&main_mcan14 {
-	status = "disabled";
-};
-
-&main_mcan15 {
-	status = "disabled";
-};
-
-&main_mcan17 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/ti/k3-j721s2-main.dtsi b/dts/src/arm64/ti/k3-j721s2-main.dtsi
index 34e7d577ae..8915132efc 100644
--- a/dts/src/arm64/ti/k3-j721s2-main.dtsi
+++ b/dts/src/arm64/ti/k3-j721s2-main.dtsi
@@ -60,7 +60,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <148>;
-		ti,interrupt-ranges = <8 360 56>;
+		ti,interrupt-ranges = <8 392 56>;
 	};
 
 	main_pmx0: pinctrl@11c000 {
@@ -72,6 +72,25 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x04e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+		       <&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x04e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x200>;
@@ -80,6 +99,7 @@
 		clocks = <&k3_clks 146 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -90,6 +110,7 @@
 		clocks = <&k3_clks 350 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -100,6 +121,7 @@
 		clocks = <&k3_clks 351 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -110,6 +132,7 @@
 		clocks = <&k3_clks 352 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -120,6 +143,7 @@
 		clocks = <&k3_clks 353 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -130,6 +154,7 @@
 		clocks = <&k3_clks 354 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -140,6 +165,7 @@
 		clocks = <&k3_clks 355 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart7: serial@2870000 {
@@ -150,6 +176,7 @@
 		clocks = <&k3_clks 356 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart8: serial@2880000 {
@@ -160,6 +187,7 @@
 		clocks = <&k3_clks 357 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart9: serial@2890000 {
@@ -170,6 +198,7 @@
 		clocks = <&k3_clks 358 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_gpio0: gpio@600000 {
@@ -256,6 +285,7 @@
 		clocks = <&k3_clks 215 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -267,6 +297,7 @@
 		clocks = <&k3_clks 216 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 216 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -278,6 +309,7 @@
 		clocks = <&k3_clks 217 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c4: i2c@2040000 {
@@ -289,6 +321,7 @@
 		clocks = <&k3_clks 218 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c5: i2c@2050000 {
@@ -300,6 +333,7 @@
 		clocks = <&k3_clks 219 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c6: i2c@2060000 {
@@ -311,6 +345,7 @@
 		clocks = <&k3_clks 220 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_sdhci0: mmc@4f80000 {
@@ -428,6 +463,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -437,6 +473,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -446,6 +483,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -455,6 +493,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -464,6 +503,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -473,6 +513,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -482,6 +523,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -491,6 +533,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -500,6 +543,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -509,6 +553,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -518,6 +563,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -527,6 +573,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster0: mailbox@31f90000 {
@@ -536,6 +583,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster1: mailbox@31f91000 {
@@ -545,6 +593,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster2: mailbox@31f92000 {
@@ -554,6 +603,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster3: mailbox@31f93000 {
@@ -563,6 +613,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster4: mailbox@31f94000 {
@@ -572,6 +623,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster5: mailbox@31f95000 {
@@ -581,6 +633,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster6: mailbox@31f96000 {
@@ -590,6 +643,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster7: mailbox@31f97000 {
@@ -599,6 +653,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster8: mailbox@31f98000 {
@@ -608,6 +663,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster9: mailbox@31f99000 {
@@ -617,6 +673,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster10: mailbox@31f9a000 {
@@ -626,6 +683,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster11: mailbox@31f9b000 {
@@ -635,6 +693,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		main_ringacc: ringacc@3c000000 {
@@ -698,6 +757,7 @@
 			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan1: can@2711000 {
@@ -712,6 +772,7 @@
 			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan2: can@2721000 {
@@ -726,6 +787,7 @@
 			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan3: can@2731000 {
@@ -740,6 +802,7 @@
 			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan4: can@2741000 {
@@ -754,6 +817,7 @@
 			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan5: can@2751000 {
@@ -768,6 +832,7 @@
 			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan6: can@2761000 {
@@ -782,6 +847,7 @@
 			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan7: can@2771000 {
@@ -796,6 +862,7 @@
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan8: can@2781000 {
@@ -810,6 +877,7 @@
 			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan9: can@2791000 {
@@ -824,6 +892,7 @@
 			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan10: can@27a1000 {
@@ -838,6 +907,7 @@
 			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan11: can@27b1000 {
@@ -852,6 +922,7 @@
 			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan12: can@27c1000 {
@@ -866,6 +937,7 @@
 			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan13: can@27d1000 {
@@ -880,6 +952,7 @@
 			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan14: can@2681000 {
@@ -894,6 +967,7 @@
 			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan15: can@2691000 {
@@ -908,6 +982,7 @@
 			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan16: can@26a1000 {
@@ -922,6 +997,7 @@
 			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan17: can@26b1000 {
@@ -936,5 +1012,6 @@
 			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 };
diff --git a/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd13..0af242aa98 100644
--- a/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -65,7 +65,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <125>;
-		ti,interrupt-ranges = <16 928 16>;
+		ti,interrupt-ranges = <16 960 16>;
 	};
 
 	mcu_conf: syscon@40f00000 {
@@ -91,6 +91,7 @@
 		clocks = <&k3_clks 359 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -101,6 +102,7 @@
 		clocks = <&k3_clks 149 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_gpio0: gpio@42110000 {
@@ -144,6 +146,7 @@
 		clocks = <&k3_clks 223 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@40b00000 {
@@ -155,6 +158,7 @@
 		clocks = <&k3_clks 221 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@40b10000 {
@@ -166,6 +170,7 @@
 		clocks = <&k3_clks 222 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_mcan0: can@40528000 {
@@ -180,6 +185,7 @@
 			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	mcu_mcan1: can@40568000 {
@@ -194,6 +200,7 @@
 			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	mcu_navss: bus@28380000{
diff --git a/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi b/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi
index 76f0ceacb6..6930efff8a 100644
--- a/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi
+++ b/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi
@@ -56,6 +56,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -73,103 +74,8 @@
 };
 
 &main_mcan16 {
+	status = "okay";
 	pinctrl-0 = <&main_mcan16_pins_default>;
 	pinctrl-names = "default";
 	phys = <&transceiver0>;
 };
-
-&mailbox0_cluster0 {
-	status = "disabled";
-};
-
-&mailbox0_cluster1 {
-	status = "disabled";
-};
-
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
-&mailbox1_cluster0 {
-	status = "disabled";
-};
-
-&mailbox1_cluster1 {
-	status = "disabled";
-};
-
-&mailbox1_cluster2 {
-	status = "disabled";
-};
-
-&mailbox1_cluster3 {
-	status = "disabled";
-};
-
-&mailbox1_cluster4 {
-	status = "disabled";
-};
-
-&mailbox1_cluster5 {
-	status = "disabled";
-};
-
-&mailbox1_cluster6 {
-	status = "disabled";
-};
-
-&mailbox1_cluster7 {
-	status = "disabled";
-};
-
-&mailbox1_cluster8 {
-	status = "disabled";
-};
-
-&mailbox1_cluster9 {
-	status = "disabled";
-};
-
-&mailbox1_cluster10 {
-	status = "disabled";
-};
-
-&mailbox1_cluster11 {
-	status = "disabled";
-};
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts
index e2dd72fe33..24a2523171 100644
--- a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts
@@ -150,6 +150,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <114285000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -1015,4 +1027,12 @@
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+	ports {
+		port@5 {
+			dpsub_dp_out: endpoint {
+				remote-endpoint = <&dpcon_in>;
+			};
+		};
+	};
 };
diff --git a/dts/src/arm64/xilinx/zynqmp.dtsi b/dts/src/arm64/xilinx/zynqmp.dtsi
index a549265e55..4325cb8526 100644
--- a/dts/src/arm64/xilinx/zynqmp.dtsi
+++ b/dts/src/arm64/xilinx/zynqmp.dtsi
@@ -100,6 +100,22 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rproc_0_fw_image: memory@3ed00000 {
+			no-map;
+			reg = <0x0 0x3ed00000 0x0 0x40000>;
+		};
+
+		rproc_1_fw_image: memory@3ef00000 {
+			no-map;
+			reg = <0x0 0x3ef00000 0x0 0x40000>;
+		};
+	};
+
 	zynqmp_ipi: zynqmp_ipi {
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
@@ -203,6 +219,23 @@
 		ranges;
 	};
 
+	remoteproc {
+		compatible = "xlnx,zynqmp-r5fss";
+		xlnx,cluster-mode = <1>;
+
+		r5f-0 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_0>;
+			memory-region = <&rproc_0_fw_image>;
+		};
+
+		r5f-1 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_1>;
+			memory-region = <&rproc_1_fw_image>;
+		};
+	};
+
 	amba: axi {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -930,6 +963,30 @@
 			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
 			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
 			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					reg = <2>;
+				};
+				port@3 {
+					reg = <3>;
+				};
+				port@4 {
+					reg = <4>;
+				};
+				port@5 {
+					reg = <5>;
+				};
+			};
 		};
 	};
 };
diff --git a/dts/src/mips/brcm/bcm63268.dtsi b/dts/src/mips/brcm/bcm63268.dtsi
index 8926417a8f..7b788757cb 100644
--- a/dts/src/mips/brcm/bcm63268.dtsi
+++ b/dts/src/mips/brcm/bcm63268.dtsi
@@ -109,6 +109,13 @@
 			compatible = "brcm,bcm7038-twd", "simple-mfd", "syscon";
 			reg = <0x10000080 0x30>;
 			ranges = <0x0 0x10000080 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm6345-timer";
+				reg = <0x0 0x1c>;
+			};
 
 			wdt: watchdog@1c {
 				compatible = "brcm,bcm7038-wdt";
diff --git a/dts/src/mips/brcm/bcm7435.dtsi b/dts/src/mips/brcm/bcm7435.dtsi
index 8c001b944c..cfdf9804e1 100644
--- a/dts/src/mips/brcm/bcm7435.dtsi
+++ b/dts/src/mips/brcm/bcm7435.dtsi
@@ -422,6 +422,7 @@
 			reg = <0x41c800 0x600>, <0x41d000 0x100>;
 			interrupt-parent = <&hif_l2_intc>;
 			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
 			status = "disabled";
 		};
 
diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts
index 37c46720c7..f38c39572a 100644
--- a/dts/src/mips/ingenic/ci20.dts
+++ b/dts/src/mips/ingenic/ci20.dts
@@ -438,7 +438,7 @@
 		ingenic,nemc-tAW = <50>;
 		ingenic,nemc-tSTRV = <100>;
 
-		reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&eth0_power>;
 
 		interrupt-parent = <&gpe>;
diff --git a/dts/src/mips/mscc/jaguar2_pcb110.dts b/dts/src/mips/mscc/jaguar2_pcb110.dts
index 0ea7bc5b57..1813f4e32e 100644
--- a/dts/src/mips/mscc/jaguar2_pcb110.dts
+++ b/dts/src/mips/mscc/jaguar2_pcb110.dts
@@ -208,7 +208,7 @@
 };
 
 &i2c0 {
-	pca9545@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -236,7 +236,7 @@
 			reg = <3>;
 		};
 	};
-	pca9545@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		reg = <0x71>;
 		#address-cells = <1>;
diff --git a/dts/src/mips/qca/ar9331.dtsi b/dts/src/mips/qca/ar9331.dtsi
index c4102b280b..768ac0f869 100644
--- a/dts/src/mips/qca/ar9331.dtsi
+++ b/dts/src/mips/qca/ar9331.dtsi
@@ -176,7 +176,6 @@
 
 						switch_port0: port@0 {
 							reg = <0x0>;
-							label = "cpu";
 							ethernet = <&eth1>;
 
 							phy-mode = "gmii";
diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts
index 7515555388..e31417569e 100644
--- a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts
@@ -113,13 +113,13 @@
 
 &gmac1 {
 	status = "okay";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy5>;
 };
 
 &mdio {
 	ethphy5: ethernet-phy@5 {
 		reg = <5>;
-		phy-mode = "rgmii-rxid";
 	};
 };
 
diff --git a/dts/src/mips/ralink/mt7621.dtsi b/dts/src/mips/ralink/mt7621.dtsi
index f3f4c1f26e..aec85c7793 100644
--- a/dts/src/mips/ralink/mt7621.dtsi
+++ b/dts/src/mips/ralink/mt7621.dtsi
@@ -357,36 +357,35 @@
 					port@0 {
 						status = "disabled";
 						reg = <0>;
-						label = "lan0";
+						label = "swp0";
 					};
 
 					port@1 {
 						status = "disabled";
 						reg = <1>;
-						label = "lan1";
+						label = "swp1";
 					};
 
 					port@2 {
 						status = "disabled";
 						reg = <2>;
-						label = "lan2";
+						label = "swp2";
 					};
 
 					port@3 {
 						status = "disabled";
 						reg = <3>;
-						label = "lan3";
+						label = "swp3";
 					};
 
 					port@4 {
 						status = "disabled";
 						reg = <4>;
-						label = "lan4";
+						label = "swp4";
 					};
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
 						ethernet = <&gmac0>;
 						phy-mode = "trgmii";
 
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
index baa0c503e7..7e70977f28 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -55,7 +55,8 @@ fman@400000 {
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy0>;
+		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	mdio@e1000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
index 93095600e8..5f89f7c176 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -52,7 +52,15 @@ fman@400000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
-		pcsphy-handle = <&pcsphy6>;
+		pcsphy-handle = <&pcsphy6>, <&qsgmiib_pcs2>, <&pcsphy6>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
 	};
 
 	mdio@f1000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
index ff4bd38f06..71eb75e82c 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -55,7 +55,15 @@ fman@400000 {
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy1>;
+		pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiia_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
 	};
 
 	mdio@e3000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
index 1fa38ed6f5..fb7032ddb7 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -52,7 +52,15 @@ fman@400000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
-		pcsphy-handle = <&pcsphy7>;
+		pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs3>, <&pcsphy7>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
 	};
 
 	mdio@f3000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-2.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-2.dtsi
new file mode 100644
index 0000000000..6b3609574b
--- /dev/null
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-2.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+		pcs-handle-names = "sgmii", "xfi";
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-3.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-3.dtsi
new file mode 100644
index 0000000000..28ed1a85a4
--- /dev/null
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-3.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>, <&pcsphy1>;
+		pcs-handle-names = "sgmii", "xfi";
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
index a8cc9780c0..1089d6861b 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -51,7 +51,8 @@ fman@400000 {
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy0>;
+		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	mdio@e1000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
index 8b8bd70c93..a95bbb4fc8 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -51,7 +51,15 @@ fman@400000 {
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy1>;
+		pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiia_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
 	};
 
 	mdio@e3000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
index 619c880b54..7d5af0147a 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -51,7 +51,15 @@ fman@400000 {
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy2>;
+		pcsphy-handle = <&pcsphy2>, <&qsgmiia_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiia_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
 	};
 
 	mdio@e5000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
index d7ebb73a40..61e5466ec8 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -51,7 +51,15 @@ fman@400000 {
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy3>;
+		pcsphy-handle = <&pcsphy3>, <&qsgmiia_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiia_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
 	};
 
 	mdio@e7000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
index b151d696a0..3ba0cdafc0 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -51,7 +51,8 @@ fman@400000 {
 		reg = <0xe8000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy4>;
+		pcsphy-handle = <&pcsphy4>, <&pcsphy4>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	mdio@e9000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
index adc0ae0013..51748de0a2 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -51,7 +51,15 @@ fman@400000 {
 		reg = <0xea000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
 		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy5>;
+		pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e9000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
 	};
 
 	mdio@eb000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
index 435047e0e2..ee4f5170f6 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -52,7 +52,15 @@ fman@500000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
-		pcsphy-handle = <&pcsphy14>;
+		pcsphy-handle = <&pcsphy14>, <&qsgmiid_pcs2>, <&pcsphy14>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiid_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
 	};
 
 	mdio@f1000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
index c098657cca..83d2e0ce8f 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -52,7 +52,15 @@ fman@500000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
-		pcsphy-handle = <&pcsphy15>;
+		pcsphy-handle = <&pcsphy15>, <&qsgmiid_pcs3>, <&pcsphy15>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiid_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
 	};
 
 	mdio@f3000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
index 9d06824815..3132fc73f1 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -51,7 +51,8 @@ fman@500000 {
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
 		ptp-timer = <&ptp_timer1>;
-		pcsphy-handle = <&pcsphy8>;
+		pcsphy-handle = <&pcsphy8>, <&pcsphy8>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	mdio@e1000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
index 70e947730c..75e904d966 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -51,7 +51,15 @@ fman@500000 {
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
 		ptp-timer = <&ptp_timer1>;
-		pcsphy-handle = <&pcsphy9>;
+		pcsphy-handle = <&pcsphy9>, <&qsgmiic_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiic_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
 	};
 
 	mdio@e3000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
index ad96e65295..69f2cc7b8f 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -51,7 +51,15 @@ fman@500000 {
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
 		ptp-timer = <&ptp_timer1>;
-		pcsphy-handle = <&pcsphy10>;
+		pcsphy-handle = <&pcsphy10>, <&qsgmiic_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiic_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
 	};
 
 	mdio@e5000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
index 034bc4b71f..b3aaf01d7d 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -51,7 +51,15 @@ fman@500000 {
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
 		ptp-timer = <&ptp_timer1>;
-		pcsphy-handle = <&pcsphy11>;
+		pcsphy-handle = <&pcsphy11>, <&qsgmiic_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiic_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
 	};
 
 	mdio@e7000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
index 93ca23d82b..18e0204328 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -51,7 +51,8 @@ fman@500000 {
 		reg = <0xe8000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
 		ptp-timer = <&ptp_timer1>;
-		pcsphy-handle = <&pcsphy12>;
+		pcsphy-handle = <&pcsphy12>, <&pcsphy12>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	mdio@e9000 {
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
index 23b3117a2f..55f329d13f 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -51,7 +51,15 @@ fman@500000 {
 		reg = <0xea000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
 		ptp-timer = <&ptp_timer1>;
-		pcsphy-handle = <&pcsphy13>;
+		pcsphy-handle = <&pcsphy13>, <&qsgmiid_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e9000 {
+		qsgmiid_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
 	};
 
 	mdio@eb000 {
diff --git a/dts/src/powerpc/fsl/t1024qds.dts b/dts/src/powerpc/fsl/t1024qds.dts
index d6858b7cd9..9ea7942f91 100644
--- a/dts/src/powerpc/fsl/t1024qds.dts
+++ b/dts/src/powerpc/fsl/t1024qds.dts
@@ -151,7 +151,7 @@
 		};
 
 		i2c@118000 {
-			pca9547@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9547";
 				reg = <0x77>;
 				#address-cells = <1>;
diff --git a/dts/src/powerpc/fsl/t1024rdb.dts b/dts/src/powerpc/fsl/t1024rdb.dts
index dbcd31cc35..270aaf631f 100644
--- a/dts/src/powerpc/fsl/t1024rdb.dts
+++ b/dts/src/powerpc/fsl/t1024rdb.dts
@@ -165,7 +165,7 @@
 		};
 
 		i2c@118100 {
-			pca9546@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9546";
 				reg = <0x77>;
 				#address-cells = <1>;
diff --git a/dts/src/powerpc/fsl/t104xqds.dtsi b/dts/src/powerpc/fsl/t104xqds.dtsi
index 6154797322..1c329f076f 100644
--- a/dts/src/powerpc/fsl/t104xqds.dtsi
+++ b/dts/src/powerpc/fsl/t104xqds.dtsi
@@ -268,7 +268,7 @@
 		};
 
 		i2c@118000 {
-			pca9547@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9547";
 				reg = <0x77>;
 			};
diff --git a/dts/src/powerpc/fsl/t104xrdb.dtsi b/dts/src/powerpc/fsl/t104xrdb.dtsi
index bfe1ed5be3..fc7bec5dcb 100644
--- a/dts/src/powerpc/fsl/t104xrdb.dtsi
+++ b/dts/src/powerpc/fsl/t104xrdb.dtsi
@@ -128,7 +128,7 @@
 		};
 
 		i2c@118100 {
-			pca9546@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9546";
 				reg = <0x77>;
 				#address-cells = <1>;
diff --git a/dts/src/powerpc/fsl/t2081si-post.dtsi b/dts/src/powerpc/fsl/t2081si-post.dtsi
index ecbb447920..74e17e1343 100644
--- a/dts/src/powerpc/fsl/t2081si-post.dtsi
+++ b/dts/src/powerpc/fsl/t2081si-post.dtsi
@@ -609,8 +609,8 @@
 /include/ "qoriq-bman1.dtsi"
 
 /include/ "qoriq-fman3-0.dtsi"
-/include/ "qoriq-fman3-0-1g-0.dtsi"
-/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-10g-2.dtsi"
+/include/ "qoriq-fman3-0-10g-3.dtsi"
 /include/ "qoriq-fman3-0-1g-2.dtsi"
 /include/ "qoriq-fman3-0-1g-3.dtsi"
 /include/ "qoriq-fman3-0-1g-4.dtsi"
diff --git a/dts/src/powerpc/fsl/t208xqds.dtsi b/dts/src/powerpc/fsl/t208xqds.dtsi
index db4139999b..962c999416 100644
--- a/dts/src/powerpc/fsl/t208xqds.dtsi
+++ b/dts/src/powerpc/fsl/t208xqds.dtsi
@@ -135,7 +135,7 @@
 		};
 
 		i2c@118000 {
-			pca9547@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9547";
 				reg = <0x77>;
 				#address-cells = <1>;
diff --git a/dts/src/powerpc/fsl/t208xrdb.dtsi b/dts/src/powerpc/fsl/t208xrdb.dtsi
index ff87e67c70..ecc3e8c739 100644
--- a/dts/src/powerpc/fsl/t208xrdb.dtsi
+++ b/dts/src/powerpc/fsl/t208xrdb.dtsi
@@ -138,7 +138,7 @@
 		};
 
 		i2c@118100 {
-			pca9546@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9546";
 				reg = <0x77>;
 			};
diff --git a/dts/src/powerpc/microwatt.dts b/dts/src/powerpc/microwatt.dts
index b69db1d275..269e930b3b 100644
--- a/dts/src/powerpc/microwatt.dts
+++ b/dts/src/powerpc/microwatt.dts
@@ -21,6 +21,14 @@
 		reg = <0x00000000 0x00000000 0x00000000 0x10000000>;
 	};
 
+	clocks {
+		sys_clk: litex_sys_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+	};
+
 	cpus {
 		#size-cells = <0x00>;
 		#address-cells = <0x01>;
@@ -141,6 +149,20 @@
 			litex,slot-size = <0x800>;
 			interrupts = <0x11 0x1>;
 		};
+
+		mmc@8040000 {
+			compatible = "litex,mmc";
+			reg = <0x8042800 0x800
+				0x8041000 0x800
+				0x8040800 0x800
+				0x8042000 0x800
+				0x8041800 0x800>;
+			reg-names = "phy", "core", "reader", "writer", "irq";
+			bus-width = <4>;
+			interrupts = <0x13 1>;
+			cap-sd-highspeed;
+			clocks = <&sys_clk>;
+		};
 	};
 
 	chosen {
diff --git a/dts/src/powerpc/turris1x.dts b/dts/src/powerpc/turris1x.dts
index 045af668e9..e9cda34a14 100644
--- a/dts/src/powerpc/turris1x.dts
+++ b/dts/src/powerpc/turris1x.dts
@@ -69,6 +69,20 @@
 				interrupt-parent = <&gpio>;
 				interrupts = <12 IRQ_TYPE_LEVEL_LOW>, /* GPIO12 - ALERT pin */
 					     <13 IRQ_TYPE_LEVEL_LOW>; /* GPIO13 - CRIT pin */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* Local temperature sensor (SA56004ED internal) */
+				channel@0 {
+					reg = <0>;
+					label = "board";
+				};
+
+				/* Remote temperature sensor (D+/D- connected to P2020 CPU Temperature Diode) */
+				channel@1 {
+					reg = <1>;
+					label = "cpu";
+				};
 			};
 
 			/* DDR3 SPD/EEPROM */
diff --git a/dts/src/powerpc/warp.dts b/dts/src/powerpc/warp.dts
index b4f3274087..aa62d08e97 100644
--- a/dts/src/powerpc/warp.dts
+++ b/dts/src/powerpc/warp.dts
@@ -258,14 +258,12 @@
 			};
 
 			power-leds {
-				compatible = "gpio-leds";
+				compatible = "warp-power-leds";
 				green {
 					gpios = <&GPIO1 0 0>;
-					default-state = "keep";
 				};
 				red {
 					gpios = <&GPIO1 1 0>;
-					default-state = "keep";
 				};
 			};
 
diff --git a/dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi b/dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi
index 24b1cfb9a7..1069134f2e 100644
--- a/dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/dts/src/riscv/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -9,8 +9,8 @@
 		compatible = "microchip,corepwm-rtl-v4";
 		reg = <0x0 0x40000000 0x0 0xF0>;
 		microchip,sync-update-mask = /bits/ 32 <0>;
-		#pwm-cells = <2>;
-		clocks = <&fabric_clk3>;
+		#pwm-cells = <3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
 		status = "disabled";
 	};
 
@@ -19,25 +19,13 @@
 		reg = <0x0 0x40000200 0x0 0x100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&fabric_clk3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
 		interrupt-parent = <&plic>;
 		interrupts = <122>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
 
-	fabric_clk3: fabric-clk3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-
-	fabric_clk1: fabric-clk1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-	};
-
 	pcie: pcie@3000000000 {
 		compatible = "microchip,pcie-host-1.0";
 		#address-cells = <0x3>;
@@ -54,7 +42,7 @@
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
 		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>;
 		clock-names = "fic1", "fic3";
 		ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>;
 		dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
@@ -67,4 +55,17 @@
 			interrupt-controller;
 		};
 	};
+
+	refclk_ccc: cccrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
+
+&ccc_nw {
+	clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+		 <&refclk_ccc>, <&refclk_ccc>;
+	clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+		      "dll0_ref", "dll1_ref";
+	status = "okay";
 };
diff --git a/dts/src/riscv/microchip/mpfs-icicle-kit.dts b/dts/src/riscv/microchip/mpfs-icicle-kit.dts
index ec7b7c2a3c..90b2611147 100644
--- a/dts/src/riscv/microchip/mpfs-icicle-kit.dts
+++ b/dts/src/riscv/microchip/mpfs-icicle-kit.dts
@@ -5,6 +5,8 @@
 
 #include "mpfs.dtsi"
 #include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 /* Clock frequency (in Hz) of the rtcclk */
 #define RTCCLK_FREQ		1000000
@@ -31,13 +33,41 @@
 		timebase-frequency = <RTCCLK_FREQ>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led4";
+		};
+	};
+
 	ddrc_cache_lo: memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>;
 		status = "okay";
 	};
 
-	ddrc_cache_hi: memory@1000000000 {
+	ddrc_cache_hi: memory@1040000000 {
 		device_type = "memory";
 		reg = <0x10 0x40000000 0x0 0x40000000>;
 		status = "okay";
@@ -149,6 +179,10 @@
 	clock-frequency = <125000000>;
 };
 
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
 &rtc {
 	status = "okay";
 };
diff --git a/dts/src/riscv/microchip/mpfs-m100pfs-fabric.dtsi b/dts/src/riscv/microchip/mpfs-m100pfs-fabric.dtsi
index 7b9ee13b6a..8230f06ddf 100644
--- a/dts/src/riscv/microchip/mpfs-m100pfs-fabric.dtsi
+++ b/dts/src/riscv/microchip/mpfs-m100pfs-fabric.dtsi
@@ -30,8 +30,8 @@
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
 		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-		clock-names = "fic0", "fic1", "fic3";
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
 		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
 		msi-parent = <&pcie>;
 		msi-controller;
diff --git a/dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi b/dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi
index 67303bc0e4..9a56de7b91 100644
--- a/dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi
+++ b/dts/src/riscv/microchip/mpfs-polarberry-fabric.dtsi
@@ -30,8 +30,8 @@
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
 		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-		clock-names = "fic0", "fic1", "fic3";
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
 		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
 		msi-parent = <&pcie>;
 		msi-controller;
diff --git a/dts/src/riscv/microchip/mpfs-sev-kit-fabric.dtsi b/dts/src/riscv/microchip/mpfs-sev-kit-fabric.dtsi
index 8545baf4d1..39a77df489 100644
--- a/dts/src/riscv/microchip/mpfs-sev-kit-fabric.dtsi
+++ b/dts/src/riscv/microchip/mpfs-sev-kit-fabric.dtsi
@@ -13,33 +13,4 @@
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
-
-	pcie: pcie@2000000000 {
-		compatible = "microchip,pcie-host-1.0";
-		#address-cells = <0x3>;
-		#interrupt-cells = <0x1>;
-		#size-cells = <0x2>;
-		device_type = "pci";
-		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
-		reg-names = "cfg", "apb";
-		bus-range = <0x0 0x7f>;
-		interrupt-parent = <&plic>;
-		interrupts = <119>;
-		interrupt-map = <0 0 0 1 &pcie_intc 0>,
-				<0 0 0 2 &pcie_intc 1>,
-				<0 0 0 3 &pcie_intc 2>,
-				<0 0 0 4 &pcie_intc 3>;
-		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-		clock-names = "fic0", "fic1", "fic3";
-		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
-		msi-parent = <&pcie>;
-		msi-controller;
-		status = "disabled";
-		pcie_intc: interrupt-controller {
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-	};
 };
diff --git a/dts/src/riscv/microchip/mpfs.dtsi b/dts/src/riscv/microchip/mpfs.dtsi
index 8f463399a5..0a9bb84af4 100644
--- a/dts/src/riscv/microchip/mpfs.dtsi
+++ b/dts/src/riscv/microchip/mpfs.dtsi
@@ -236,6 +236,38 @@
 			#clock-cells = <1>;
 		};
 
+		ccc_se: clock-controller@38010000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
+			      <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_ne: clock-controller@38040000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
+			      <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_nw: clock-controller@38100000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
+			      <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_sw: clock-controller@38400000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
+			      <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
 		mmuart0: serial@20000000 {
 			compatible = "ns16550a";
 			reg = <0x0 0x20000000 0x0 0x400>;
diff --git a/dts/src/riscv/renesas/r9a07g043f.dtsi b/dts/src/riscv/renesas/r9a07g043f.dtsi
new file mode 100644
index 0000000000..6ec1c6f9a4
--- /dev/null
+++ b/dts/src/riscv/renesas/r9a07g043f.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)	(nr + 32)
+
+#include <arm64/renesas/r9a07g043.dtsi>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <12000000>;
+
+		cpu0: cpu@0 {
+			compatible = "andestech,ax45mp", "riscv";
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			reg = <0x0>;
+			status = "okay";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,sv39";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <0x40>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <0x40>;
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+};
+
+&soc {
+	interrupt-parent = <&plic>;
+
+	plic: interrupt-controller@12c00000 {
+		compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		riscv,ndev = <511>;
+		interrupt-controller;
+		reg = <0x0 0x12c00000 0 0x400000>;
+		clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
+		power-domains = <&cpg>;
+		resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
+		interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
+	};
+};
diff --git a/dts/src/riscv/renesas/r9a07g043f01-smarc.dts b/dts/src/riscv/renesas/r9a07g043f01-smarc.dts
new file mode 100644
index 0000000000..2aa8515451
--- /dev/null
+++ b/dts/src/riscv/renesas/r9a07g043f01-smarc.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(0: uSD; 1: eMMC)
+ * SW1-3 : SW_ET0_EN_N		(0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
+ * Please change below macros according to SW1 setting on the SoM
+ */
+#define SW_SW0_DEV_SEL	1
+#define SW_ET0_EN_N	1
+
+#include "r9a07g043f.dtsi"
+#include "rzfive-smarc-som.dtsi"
+#include "rzfive-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g043f01";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g043f01", "renesas,r9a07g043";
+};
diff --git a/dts/src/riscv/renesas/rzfive-smarc-som.dtsi b/dts/src/riscv/renesas/rzfive-smarc-som.dtsi
new file mode 100644
index 0000000000..2b7672bc4b
--- /dev/null
+++ b/dts/src/riscv/renesas/rzfive-smarc-som.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK SOM
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <arm64/renesas/rzg2ul-smarc-som.dtsi>
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+	};
+};
+
+&dmac {
+	status = "disabled";
+};
+
+&eth0 {
+	status = "disabled";
+};
+
+&eth1 {
+	status = "disabled";
+};
+
+&ostm1 {
+	status = "disabled";
+};
+
+&ostm2 {
+	status = "disabled";
+};
+
+&sdhi0 {
+	status = "disabled";
+};
+
+&wdt0 {
+	status = "disabled";
+};
diff --git a/dts/src/riscv/renesas/rzfive-smarc.dtsi b/dts/src/riscv/renesas/rzfive-smarc.dtsi
new file mode 100644
index 0000000000..c07a487c4e
--- /dev/null
+++ b/dts/src/riscv/renesas/rzfive-smarc.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK carrier board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <arm64/renesas/rzg2ul-smarc.dtsi>
+
+&ehci0 {
+	status = "disabled";
+};
+
+&ehci1 {
+	status = "disabled";
+};
+
+&hsusb {
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "disabled";
+};
+
+&ohci1 {
+	status = "disabled";
+};
+
+&phyrst {
+	status = "disabled";
+};
+
+&sdhi1 {
+	status = "disabled";
+};
+
+&snd_rzg2l {
+	status = "disabled";
+};
+
+&spi1 {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "disabled";
+};
+
+&usb0_vbus_otg {
+	status = "disabled";
+};
+
+&usb2_phy0 {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	status = "disabled";
+};
+
+&vccq_sdhi1 {
+	status = "disabled";
+};
diff --git a/dts/src/riscv/starfive/jh7100-beaglev-starlight.dts b/dts/src/riscv/starfive/jh7100-beaglev-starlight.dts
index f7a2301105..7cda3a8902 100644
--- a/dts/src/riscv/starfive/jh7100-beaglev-starlight.dts
+++ b/dts/src/riscv/starfive/jh7100-beaglev-starlight.dts
@@ -5,160 +5,9 @@
  */
 
 /dts-v1/;
-#include "jh7100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+#include "jh7100-common.dtsi"
 
 / {
 	model = "BeagleV Starlight Beta";
 	compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
-	aliases {
-		serial0 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <6250000>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x2 0x0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-ack {
-			gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_HEARTBEAT;
-			linux,default-trigger = "heartbeat";
-			label = "ack";
-		};
-	};
-};
-
-&gpio {
-	i2c0_pins: i2c0-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(62, GPO_LOW,
-				  GPO_I2C0_PAD_SCK_OEN,
-				  GPI_I2C0_PAD_SCK_IN)>,
-				 <GPIOMUX(61, GPO_LOW,
-				  GPO_I2C0_PAD_SDA_OEN,
-				  GPI_I2C0_PAD_SDA_IN)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2c1_pins: i2c1-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(47, GPO_LOW,
-				  GPO_I2C1_PAD_SCK_OEN,
-				  GPI_I2C1_PAD_SCK_IN)>,
-				 <GPIOMUX(48, GPO_LOW,
-				  GPO_I2C1_PAD_SDA_OEN,
-				  GPI_I2C1_PAD_SDA_IN)>;
-			bias-pull-up;
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2c2_pins: i2c2-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(60, GPO_LOW,
-				  GPO_I2C2_PAD_SCK_OEN,
-				  GPI_I2C2_PAD_SCK_IN)>,
-				 <GPIOMUX(59, GPO_LOW,
-				  GPO_I2C2_PAD_SDA_OEN,
-				  GPI_I2C2_PAD_SDA_IN)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	uart3_pins: uart3-0 {
-		rx-pins {
-			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
-				  GPI_UART3_PAD_SIN)>;
-			bias-pull-up;
-			drive-strength = <14>;
-			input-enable;
-			input-schmitt-enable;
-			slew-rate = <0>;
-		};
-		tx-pins {
-			pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
-				  GPO_ENABLE, GPI_NONE)>;
-			bias-disable;
-			drive-strength = <35>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-	};
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <500>;
-	i2c-scl-falling-time-ns = <500>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	pmic@5e {
-		compatible = "ti,tps65086";
-		reg = <0x5e>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		regulators {
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <100>;
-	i2c-scl-falling-time-ns = <100>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <500>;
-	i2c-scl-falling-time-ns = <500>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&osc_sys {
-	clock-frequency = <25000000>;
-};
-
-&osc_aud {
-	clock-frequency = <27000000>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
 };
diff --git a/dts/src/riscv/starfive/jh7100-common.dtsi b/dts/src/riscv/starfive/jh7100-common.dtsi
new file mode 100644
index 0000000000..b93ce351a9
--- /dev/null
+++ b/dts/src/riscv/starfive/jh7100-common.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+
+/ {
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <6250000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ack {
+			gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			label = "ack";
+		};
+	};
+};
+
+&gpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(62, GPO_LOW,
+				  GPO_I2C0_PAD_SCK_OEN,
+				  GPI_I2C0_PAD_SCK_IN)>,
+				 <GPIOMUX(61, GPO_LOW,
+				  GPO_I2C0_PAD_SDA_OEN,
+				  GPI_I2C0_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(47, GPO_LOW,
+				  GPO_I2C1_PAD_SCK_OEN,
+				  GPI_I2C1_PAD_SCK_IN)>,
+				 <GPIOMUX(48, GPO_LOW,
+				  GPO_I2C1_PAD_SDA_OEN,
+				  GPI_I2C1_PAD_SDA_IN)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(60, GPO_LOW,
+				  GPO_I2C2_PAD_SCK_OEN,
+				  GPI_I2C2_PAD_SCK_IN)>,
+				 <GPIOMUX(59, GPO_LOW,
+				  GPO_I2C2_PAD_SDA_OEN,
+				  GPI_I2C2_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	uart3_pins: uart3-0 {
+		rx-pins {
+			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+				  GPI_UART3_PAD_SIN)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+		tx-pins {
+			pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	pmic@5e {
+		compatible = "ti,tps65086";
+		reg = <0x5e>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <100>;
+	i2c-scl-falling-time-ns = <100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&osc_sys {
+	clock-frequency = <25000000>;
+};
+
+&osc_aud {
+	clock-frequency = <27000000>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
diff --git a/dts/src/riscv/starfive/jh7100-starfive-visionfive-v1.dts b/dts/src/riscv/starfive/jh7100-starfive-visionfive-v1.dts
new file mode 100644
index 0000000000..e82af72f1a
--- /dev/null
+++ b/dts/src/riscv/starfive/jh7100-starfive-visionfive-v1.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "StarFive VisionFive V1";
+	compatible = "starfive,visionfive-v1", "starfive,jh7100";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+};