arm: add vexpress board support

detect the cpu model to dynamise the periphs mapping

currently only tested on qemu but should work on real hardware

Cortex-A9

if you use 1GiB of ram you can run the same barebox on Cortex-A15 or Cortex-A9
otherwise use vexpress_ca9_defconfig where the TEXT_BASE is at 0x63f00000

when we will add the relocation support this defconfig will be drop

qemu/arm-softmmu/qemu-system-arm -M vexpress-a9 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic

Cortex-A15

qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 40 insertions, 0 deletions

diff --git a/arch/arm/boards/vexpress/env/config b/arch/arm/boards/vexpress/env/config
new file mode 100644
index 0000000000..852f2428cf
--- /dev/null
+++ b/arch/arm/boards/vexpress/env/config
@@ -0,0 +1,40 @@
+#!/bin/sh
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+# set in c
+#global.hostname=vexpress
+global.dhcp.vendor_id=barebox-${global.hostname}
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'nfs', 'tftp' or 'nor'
+kernel_loc=tftp
+# can be either 'net', 'nor' or 'initrd'
+rootfs_loc=initrd
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root.$rootfs_type
+
+kernelimage=zImage
+#kernelimage=uImage
+#kernelimage=Image
+#kernelimage=Image.lzo
+
+nfsroot="$eth0.serverip:/opt/work/busybox/arm9/rootfs_arm"
+
+nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nor=3
+
+autoboot_timeout=3
+
+bootargs="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;31m[barebox@\h]:\w\e[0m\n# "