ARM: dts: protonic: drop all devictree copies and start to use mainlined kernel versions

This should make maintaining work easier.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 2 insertions, 161 deletions

diff --git a/arch/arm/dts/imx6dl-prtmvt.dts b/arch/arm/dts/imx6dl-prtmvt.dts
index 05fce7178f..64e2f90110 100644
--- a/arch/arm/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/dts/imx6dl-prtmvt.dts
@@ -1,164 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2014 Protonic Holland
- */
-
 /dts-v1/;
-#include <arm/imx6dl.dtsi>
-#include "imx6qdl-vicut1.dtsi"
-
-/ {
-	model = "Protonic MVT board";
-	compatible = "prt,prtmvt", "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		button@20 {
-			label = "GPIO Key F1";
-			linux,code = <59>;
-			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
-		};
-		button@21 {
-			label = "GPIO Key F2";
-			linux,code = <60>;
-			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
-		};
-		button@22 {
-			label = "GPIO Key F3";
-			linux,code = <61>;
-			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
-		};
-		button@23 {
-			label = "GPIO Key F4";
-			linux,code = <62>;
-			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
-		};
-		button@24 {
-			label = "GPIO Key F5";
-			linux,code = <63>;
-			gpios = <&pca_gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		// Center
-		button@25 {
-			label = "GPIO Key CYCLE";
-			linux,code = <154>;
-			gpios = <&pca_gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		button@26 {
-			label = "GPIO Key ESC";
-			linux,code = <1>;
-			gpios = <&pca_gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		button@27 {
-			label = "GPIO Key UP";
-			linux,code = <103>;
-			gpios = <&pca_gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		button@28 {
-			label = "GPIO Key DOWN";
-			linux,code = <108>;
-			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		button@29 {
-			label = "GPIO Key OK";
-			linux,code = <0x160>;
-			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
-		};
-
-		button@2a {
-			label = "GPIO Key F6";
-			linux,code = <64>;
-			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
-		};
-		button@2b {
-			label = "GPIO Key F7";
-			linux,code = <65>;
-			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
-		};
-		button@2c {
-			label = "GPIO Key F8";
-			linux,code = <66>;
-			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
-		};
-		button@2d {
-			label = "GPIO Key F9";
-			linux,code = <67>;
-			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
-		};
-		button@2e {
-			label = "GPIO Key F10";
-			linux,code = <68>;
-			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>;
-	clock-names = "ipg", "ahb";
-	status = "okay";
-};
-
-&pwm2 {
-	status = "disabled";
-};
-
-&pcie {
-	status = "disabled";
-};
-
-&i2c1 {
-	pca_gpio: gpio@74 {
-		#gpio-cells = <2>;
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9539>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		gpio-controller;
-	};
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
-
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK   0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0
-		>;
-	};
 
-	pinctrl_pca9539: pca9539 {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-		>;
-	};
-};
+#include <arm/imx6dl-prtmvt.dts>
+#include "imx6qdl-prti6q-nor.dtsi"