diff options
| author | Oleksij Rempel <o.rempel@pengutronix.de> | 2020-08-20 09:34:52 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2020-08-24 08:49:36 +0200 |
| commit | 65a271b643b46c667ba3985f5f9df6b472203581 (patch) | |
| tree | e622788185ec1892854a2bd5a996fea498715458 /arch | |
| parent | 88771c3c8d2b0da40c2ad521723627817a7203c7 (diff) | |
| download | barebox-65a271b643b46c667ba3985f5f9df6b472203581.tar.gz barebox-65a271b643b46c667ba3985f5f9df6b472203581.tar.xz | |
ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS
Sync it with Protonic PLYBAS board to have same, reproducible behavior
on all boards.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/imx6dl-lanmcu.dts | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts index 65f6cbf395..42f8c91ece 100644 --- a/arch/arm/dts/imx6dl-lanmcu.dts +++ b/arch/arm/dts/imx6dl-lanmcu.dts @@ -201,7 +201,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x130b1 >; }; @@ -209,7 +209,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x130b1 >; }; @@ -320,7 +320,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; linux,rs485-enabled-at-boot-time; - rts-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -328,7 +327,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; linux,rs485-enabled-at-boot-time; - rts-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; |