rename U-Boot-v2 project to barebox

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 4 insertions, 4 deletions

diff --git a/board/board.dox b/board/board.dox
index 466fc591ed..12eff17be1 100644
--- a/board/board.dox
+++ b/board/board.dox
@@ -1,7 +1,7 @@
 /** @page dev_board Adapting a new Board
 
-To add a new board to U-Boot a few steps must be done, to extend and modify
-the U-Boot source tree.
+To add a new board to barebox a few steps must be done, to extend and modify
+the barebox source tree.
 
 @section board_add_files Files/Directories to be added
 
@@ -58,9 +58,9 @@ at the right architecture.
 
 @note Consider to use an unique page lable.
 
-@subsection board_lscript board/\<boardname\>/u-boot.ld.S
+@subsection board_lscript board/\<boardname\>/barebox.ld.S
 
-If your board needs a special binary U-Boot layout, you can provide a local
+If your board needs a special binary barebox layout, you can provide a local
 board linker script file. This will replace the generic one provided by your
 architecture or CPU support.