Merge branch 'for-next/video'

5 files changed, 682 insertions, 22 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8d50db6f61..1dcae48f80 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -12,6 +12,10 @@ config FRAMEBUFFER_CONSOLE
 	select FONTS
 	prompt "framebuffer console support"
 
+config DRIVER_VIDEO_FB_SSD1307
+	bool "Solomon SSD1307 framebuffer support"
+	depends on I2C && GPIOLIB
+
 config VIDEO_VPL
 	depends on OFTREE
 	bool
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 97712182e2..081e4463d8 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -21,5 +21,5 @@ obj-$(CONFIG_DRIVER_VIDEO_OMAP) += omap.o
 obj-$(CONFIG_DRIVER_VIDEO_BCM283X) += bcm2835.o
 obj-$(CONFIG_DRIVER_VIDEO_SIMPLEFB) += simplefb.o
 obj-$(CONFIG_DRIVER_VIDEO_IMX_IPUV3) += imx-ipu-v3/
-
 obj-$(CONFIG_DRIVER_VIDEO_EFI_GOP) += efi_gop.o
+obj-$(CONFIG_DRIVER_VIDEO_FB_SSD1307) += ssd1307fb.o
diff --git a/drivers/video/fb.c b/drivers/video/fb.c
index 4d2d3aa650..004df1e604 100644
--- a/drivers/video/fb.c
+++ b/drivers/video/fb.c
@@ -12,25 +12,51 @@ static int fb_ioctl(struct cdev* cdev, int req, void *data)
 {
 	struct fb_info *info = cdev->priv;
 	struct fb_info **fb;
+	int ret;
 
 	switch (req) {
 	case FBIOGET_SCREENINFO:
 		fb = data;
 		*fb = info;
+		ret = 0;
 		break;
 	case FBIO_ENABLE:
-		info->fbops->fb_enable(info);
+		ret = fb_enable(info);
 		break;
 	case FBIO_DISABLE:
-		info->fbops->fb_disable(info);
+		ret = fb_disable(info);
 		break;
 	default:
 		return -ENOSYS;
 	}
 
+	return ret;
+}
+
+static int fb_close(struct cdev *cdev)
+{
+	struct fb_info *info = cdev->priv;
+
+	if (info->fbops->fb_flush)
+		info->fbops->fb_flush(info);
+	return 0;
+}
+
+static int fb_op_flush(struct cdev *cdev)
+{
+	struct fb_info *info = cdev->priv;
+
+	if (info->fbops->fb_flush)
+		info->fbops->fb_flush(info);
 	return 0;
 }
 
+void fb_flush(struct fb_info *info)
+{
+	if (info->fbops->fb_flush)
+		info->fbops->fb_flush(info);
+}
+
 static void fb_release_shadowfb(struct fb_info *info)
 {
 	free(info->screen_base_shadow);
@@ -70,7 +96,8 @@ int fb_enable(struct fb_info *info)
 	if (ret)
 		return ret;
 
-	info->fbops->fb_enable(info);
+	if (info->fbops->fb_enable)
+		info->fbops->fb_enable(info);
 
 	info->enabled = true;
 
@@ -82,7 +109,8 @@ int fb_disable(struct fb_info *info)
 	if (!info->enabled)
 		return 0;
 
-	info->fbops->fb_disable(info);
+	if (info->fbops->fb_disable)
+		info->fbops->fb_disable(info);
 
 	fb_release_shadowfb(info);
 
@@ -199,6 +227,8 @@ static struct file_operations fb_ops = {
 	.memmap	= generic_memmap_rw,
 	.lseek	= dev_lseek_default,
 	.ioctl	= fb_ioctl,
+	.close  = fb_close,
+	.flush  = fb_op_flush,
 };
 
 static void fb_print_mode(struct fb_videomode *mode)
diff --git a/drivers/video/fbconsole.c b/drivers/video/fbconsole.c
index 693c21f547..b261f17048 100644
--- a/drivers/video/fbconsole.c
+++ b/drivers/video/fbconsole.c
@@ -11,6 +11,7 @@ enum state_t {
 	LIT,				/* Literal input */
 	ESC,				/* Start of escape sequence */
 	CSI,				/* Reading arguments in "CSI Pn ;...*/
+	CSI_CNT,
 };
 
 struct fbc_priv {
@@ -34,10 +35,12 @@ struct fbc_priv {
 
 #define ANSI_FLAG_INVERT	(1 << 0)
 #define ANSI_FLAG_BRIGHT	(1 << 1)
+#define HIDE_CURSOR		(1 << 2)
 	unsigned flags;
 
 	int csipos;
 	u8 csi[256];
+	unsigned char csi_cmd;
 
 	int active;
 	int in_console;
@@ -144,6 +147,12 @@ static void video_invertchar(struct fbc_priv *priv, int x, int y)
 			priv->font->width, priv->font->height);
 }
 
+static void show_cursor(struct fbc_priv *priv, int x, int y)
+{
+	if (!(priv->flags & HIDE_CURSOR))
+		video_invertchar(priv, x, y);
+}
+
 static void printchar(struct fbc_priv *priv, int c)
 {
 	video_invertchar(priv, priv->x, priv->y);
@@ -200,7 +209,7 @@ static void printchar(struct fbc_priv *priv, int c)
 		priv->y = priv->rows;
 	}
 
-	video_invertchar(priv, priv->x, priv->y);
+	show_cursor(priv, priv->x, priv->y);
 
 	return;
 }
@@ -258,17 +267,51 @@ static void fbc_parse_csi(struct fbc_priv *priv)
 	case 'm':
 		fbc_parse_colors(priv);
 		return;
+	case '?': /* vt100: show/hide cursor */
+		priv->csi_cmd = last;
+		priv->state = CSI_CNT;
+		return;
+	case 'h':
+		/* suffix for vt100 "[?25h" */
+		switch (priv->csi_cmd) {
+		case '?': /* cursor visible */
+			priv->csi_cmd = -1;
+			if (!(priv->flags & HIDE_CURSOR))
+				break;
+
+			priv->flags &= ~HIDE_CURSOR;
+			/* show cursor now */
+			show_cursor(priv, priv->x, priv->y);
+			break;
+		}
+		break;
+	case 'l':
+		/* suffix for vt100 "[?25l" */
+		switch (priv->csi_cmd) {
+		case '?': /* cursor invisible */
+			priv->csi_cmd = -1;
+
+			/* hide cursor now */
+			video_invertchar(priv, priv->x, priv->y);
+			priv->flags |= HIDE_CURSOR;
+
+			break;
+		}
+		break;
 	case 'J':
 		cls(priv);
-		video_invertchar(priv, priv->x, priv->y);
+		show_cursor(priv, priv->x, priv->y);
 		return;
 	case 'H':
-		video_invertchar(priv, priv->x, priv->y);
+		show_cursor(priv, priv->x, priv->y);
+
 		pos = simple_strtoul(priv->csi, &end, 10);
-		priv->y = pos ? pos - 1 : 0;
+		priv->y = clamp(pos - 1, 0, (int) priv->rows);
+
 		pos = simple_strtoul(end + 1, NULL, 10);
-		priv->x = pos ? pos - 1 : 0;
-		video_invertchar(priv, priv->x, priv->y);
+		priv->x = clamp(pos - 1, 0, (int) priv->cols);
+
+		show_cursor(priv, priv->x, priv->y);
 	case 'K':
 		pos = simple_strtoul(priv->csi, &end, 10);
 		video_invertchar(priv, priv->x, priv->y);
@@ -292,6 +335,7 @@ static void fbc_putc(struct console_device *cdev, char c)
 {
 	struct fbc_priv *priv = container_of(cdev,
 					struct fbc_priv, cdev);
+	struct fb_info *fb = priv->fb;
 
 	if (priv->in_console)
 		return;
@@ -340,11 +384,18 @@ static void fbc_putc(struct console_device *cdev, char c)
 			break;
 		default:
 			fbc_parse_csi(priv);
-			priv->state = LIT;
+			if (priv->state != CSI_CNT)
+				priv->state = LIT;
 		}
 		break;
+	case CSI_CNT:
+		priv->state = CSI;
+		break;
+
 	}
 	priv->in_console = 0;
+
+	fb_flush(fb);
 }
 
 static int setup_font(struct fbc_priv *priv)
@@ -365,21 +416,13 @@ static int setup_font(struct fbc_priv *priv)
 	return 0;
 }
 
-static int fbc_set_active(struct console_device *cdev, unsigned flags)
+static int fbc_open(struct console_device *cdev)
 {
 	struct fbc_priv *priv = container_of(cdev,
 					struct fbc_priv, cdev);
 	struct fb_info *fb = priv->fb;
 	int ret;
 
-	if (priv->active) {
-		fb_close(priv->sc);
-		priv->active = false;
-	}
-
-	if (!(flags & (CONSOLE_STDOUT | CONSOLE_STDERR)))
-		return 0;
-
 	ret = setup_font(priv);
 	if (ret)
 		return ret;
@@ -400,6 +443,21 @@ static int fbc_set_active(struct console_device *cdev, unsigned flags)
 	return 0;
 }
 
+static int fbc_close(struct console_device *cdev)
+{
+	struct fbc_priv *priv = container_of(cdev,
+					struct fbc_priv, cdev);
+
+	if (priv->active) {
+		fb_close(priv->sc);
+		priv->active = false;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 static int set_font(struct param_d *p, void *vpriv)
 {
 	struct fbc_priv *priv = vpriv;
@@ -434,7 +492,8 @@ int register_fbconsole(struct fb_info *fb)
 	cdev->getc = fbc_getc;
 	cdev->devname = "fbconsole";
 	cdev->devid = DEVICE_ID_DYNAMIC;
-	cdev->set_active = fbc_set_active;
+	cdev->open = fbc_open;
+	cdev->close = fbc_close;
 
 	ret = console_register(cdev);
 	if (ret) {
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
new file mode 100644
index 0000000000..7437d340ee
--- /dev/null
+++ b/drivers/video/ssd1307fb.c
@@ -0,0 +1,567 @@
+/*
+ * Driver for the Solomon SSD1307 OLED controller family
+ *
+ * Supports:
+ *      - SSD1305 (untested)
+ *      - SSD1306
+ *      - SSD1309 (untested)
+ *
+ * The SSD1307 controller is currently unsupported as the PWM parts were not
+ * ported.
+ *
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>, Free Electrons
+ *
+ * Ported to barebox from linux v4.10
+ * Copyright (C) 2017 Pengutronix, Bastian Stender <kernel@pengutronix.de>
+ *
+ * Licensed under the GPLv2 or later.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <fb.h>
+#include <i2c/i2c.h>
+#include <of_device.h>
+#include <gpio.h>
+#include <of_gpio.h>
+
+#define SSD1307FB_DATA                          0x40
+#define SSD1307FB_COMMAND                       0x80
+
+#define SSD1307FB_SET_ADDRESS_MODE              0x20
+#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL   (0x00)
+#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL     (0x01)
+#define SSD1307FB_SET_ADDRESS_MODE_PAGE         (0x02)
+#define SSD1307FB_SET_COL_RANGE                 0x21
+#define SSD1307FB_SET_PAGE_RANGE                0x22
+#define SSD1307FB_CONTRAST                      0x81
+#define SSD1307FB_CHARGE_PUMP                   0x8d
+#define SSD1307FB_SEG_REMAP_ON                  0xa1
+#define SSD1307FB_DISPLAY_OFF                   0xae
+#define SSD1307FB_SET_MULTIPLEX_RATIO           0xa8
+#define SSD1307FB_DISPLAY_ON                    0xaf
+#define SSD1307FB_START_PAGE_ADDRESS            0xb0
+#define SSD1307FB_SET_DISPLAY_OFFSET            0xd3
+#define SSD1307FB_SET_CLOCK_FREQ                0xd5
+#define SSD1307FB_SET_PRECHARGE_PERIOD          0xd9
+#define SSD1307FB_SET_COM_PINS_CONFIG           0xda
+#define SSD1307FB_SET_VCOMH                     0xdb
+
+struct ssd1307fb_deviceinfo {
+	u32 default_vcomh;
+	u32 default_dclk_div;
+	u32 default_dclk_frq;
+	int need_chargepump;
+};
+
+struct ssd1307fb_par {
+	u32 com_invdir;
+	u32 com_lrremap;
+	u32 com_offset;
+	u32 com_seq;
+	u32 contrast;
+	u32 dclk_div;
+	u32 dclk_frq;
+	const struct ssd1307fb_deviceinfo *device_info;
+	struct i2c_client *client;
+	u32 height;
+	struct fb_info *info;
+	u32 page_offset;
+	u32 prechargep1;
+	u32 prechargep2;
+	int reset;
+	u32 seg_remap;
+	u32 vcomh;
+	u32 width;
+};
+
+struct ssd1307fb_array {
+	u8 type;
+	u8 data[0];
+};
+
+static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
+{
+	struct ssd1307fb_array *array;
+
+	array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL);
+	if (!array)
+		return NULL;
+
+	array->type = type;
+
+	return array;
+}
+
+static int ssd1307fb_write_array(struct i2c_client *client,
+				 struct ssd1307fb_array *array, u32 len)
+{
+	int ret;
+
+	len += sizeof(struct ssd1307fb_array);
+
+	ret = i2c_master_send(client, (u8 *)array, len);
+	if (ret != len) {
+		dev_err(&client->dev, "Couldn't send I2C command.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
+{
+	struct ssd1307fb_array *array;
+	int ret;
+
+	array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND);
+	if (!array)
+		return -ENOMEM;
+
+	array->data[0] = cmd;
+
+	ret = ssd1307fb_write_array(client, array, 1);
+	kfree(array);
+
+	return ret;
+}
+
+static void ssd1307fb_update_display(struct ssd1307fb_par *par)
+{
+	struct ssd1307fb_array *array;
+	u8 *vmem = par->info->screen_base;
+	int i, j, k;
+
+	array = ssd1307fb_alloc_array(par->width * par->height / 8,
+				      SSD1307FB_DATA);
+	if (!array)
+		return;
+
+	/*
+	 * The screen is divided in pages, each having a height of 8
+	 * pixels, and the width of the screen. When sending a byte of
+	 * data to the controller, it gives the 8 bits for the current
+	 * column. I.e, the first byte are the 8 bits of the first
+	 * column, then the 8 bits for the second column, etc.
+	 *
+	 *
+	 * Representation of the screen, assuming it is 5 bits
+	 * wide. Each letter-number combination is a bit that controls
+	 * one pixel.
+	 *
+	 * A0 A1 A2 A3 A4
+	 * B0 B1 B2 B3 B4
+	 * C0 C1 C2 C3 C4
+	 * D0 D1 D2 D3 D4
+	 * E0 E1 E2 E3 E4
+	 * F0 F1 F2 F3 F4
+	 * G0 G1 G2 G3 G4
+	 * H0 H1 H2 H3 H4
+	 *
+	 * If you want to update this screen, you need to send 5 bytes:
+	 *  (1) A0 B0 C0 D0 E0 F0 G0 H0
+	 *  (2) A1 B1 C1 D1 E1 F1 G1 H1
+	 *  (3) A2 B2 C2 D2 E2 F2 G2 H2
+	 *  (4) A3 B3 C3 D3 E3 F3 G3 H3
+	 *  (5) A4 B4 C4 D4 E4 F4 G4 H4
+	 */
+
+	for (i = 0; i < (par->height / 8); i++) {
+		for (j = 0; j < par->width; j++) {
+			u32 array_idx = i * par->width + j;
+			array->data[array_idx] = 0;
+			for (k = 0; k < 8; k++) {
+				u32 page_length = par->width * i * 8;
+				u32 index = page_length + (par->width * k + j);
+				u8 byte = *(vmem + index);
+				/* convert to 1 bit per pixel */
+				u8 bit = byte > 0;
+				array->data[array_idx] |= bit << k;
+			}
+		}
+	}
+
+	ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
+	kfree(array);
+}
+
+static void ssd1307fb_enable(struct fb_info *info)
+{
+	struct ssd1307fb_par *par = info->priv;
+	ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+}
+
+static void ssd1307fb_disable(struct fb_info *info)
+{
+	struct ssd1307fb_par *par = info->priv;
+	ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF);
+}
+
+static void ssd1307fb_flush(struct fb_info *info)
+{
+	struct ssd1307fb_par *par = info->priv;
+	ssd1307fb_update_display(par);
+}
+
+static struct fb_ops ssd1307fb_ops = {
+	.fb_enable	= ssd1307fb_enable,
+	.fb_disable	= ssd1307fb_disable,
+	.fb_flush	= ssd1307fb_flush,
+};
+
+static int ssd1307fb_init(struct ssd1307fb_par *par)
+{
+	int ret;
+	u32 precharge, dclk, com_invdir, compins;
+
+	/* Set initial contrast */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->contrast);
+	if (ret < 0)
+		return ret;
+
+	/* Set segment re-map */
+	if (par->seg_remap) {
+		ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+		if (ret < 0)
+			return ret;
+	};
+
+	/* Set COM direction */
+	com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3;
+	ret = ssd1307fb_write_cmd(par->client,  com_invdir);
+	if (ret < 0)
+		return ret;
+
+	/* Set multiplex ratio value */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->height - 1);
+	if (ret < 0)
+		return ret;
+
+	/* set display offset value */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->com_offset);
+	if (ret < 0)
+		return ret;
+
+	/* Set clock frequency */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
+	if (ret < 0)
+		return ret;
+
+	dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4;
+	ret = ssd1307fb_write_cmd(par->client, dclk);
+	if (ret < 0)
+		return ret;
+
+	/* Set precharge period in number of ticks from the internal clock */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
+	if (ret < 0)
+		return ret;
+
+	precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4;
+	ret = ssd1307fb_write_cmd(par->client, precharge);
+	if (ret < 0)
+		return ret;
+
+	/* Set COM pins configuration */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	compins = 0x02 | !(par->com_seq & 0x1) << 4
+				   | (par->com_lrremap & 0x1) << 5;
+	ret = ssd1307fb_write_cmd(par->client, compins);
+	if (ret < 0)
+		return ret;
+
+	/* Set VCOMH */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->vcomh);
+	if (ret < 0)
+		return ret;
+
+	/* Turn on the DC-DC Charge Pump */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client,
+		BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0));
+	if (ret < 0)
+		return ret;
+
+	/* Switch to horizontal addressing mode */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client,
+				  SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
+	if (ret < 0)
+		return ret;
+
+	/* Set column range */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->width - 1);
+	if (ret < 0)
+		return ret;
+
+	/* Set page range */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client,
+				  par->page_offset + (par->height / 8) - 1);
+	if (ret < 0)
+		return ret;
+
+	/* Turn on the display */
+	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct ssd1307fb_deviceinfo ssd1307fb_ssd1305_deviceinfo = {
+	.default_vcomh = 0x34,
+	.default_dclk_div = 1,
+	.default_dclk_frq = 7,
+};
+
+static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = {
+	.default_vcomh = 0x20,
+	.default_dclk_div = 1,
+	.default_dclk_frq = 8,
+	.need_chargepump = 1,
+};
+
+static struct ssd1307fb_deviceinfo ssd1307fb_ssd1309_deviceinfo = {
+	.default_vcomh = 0x34,
+	.default_dclk_div = 1,
+	.default_dclk_frq = 10,
+};
+
+static const struct of_device_id ssd1307fb_of_match[] = {
+	{
+		.compatible = "solomon,ssd1305fb-i2c",
+		.data = (void *)&ssd1307fb_ssd1305_deviceinfo,
+	},
+	{
+		.compatible = "solomon,ssd1306fb-i2c",
+		.data = (void *)&ssd1307fb_ssd1306_deviceinfo,
+	},
+	{
+		.compatible = "solomon,ssd1309fb-i2c",
+		.data = (void *)&ssd1307fb_ssd1309_deviceinfo,
+	},
+	{},
+};
+
+static int ssd1307fb_probe(struct device_d *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct fb_info *info;
+	struct device_node *node = dev->device_node;
+	const struct of_device_id *match =
+		of_match_node(ssd1307fb_of_match, dev->device_node);
+	u32 vmem_size;
+	struct ssd1307fb_par *par;
+	struct ssd1307fb_array *array;
+	u8 *vmem;
+	int ret;
+	int i, j;
+
+	if (!node) {
+		dev_err(&client->dev, "No device tree data found!\n");
+		return -EINVAL;
+	}
+
+	info = xzalloc(sizeof(struct fb_info));
+
+	par = info->priv;
+	par->info = info;
+	par->client = client;
+
+	par->device_info = (struct ssd1307fb_deviceinfo *)match->data;
+
+	par->reset = of_get_named_gpio(node,
+					 "reset-gpios", 0);
+	if (!gpio_is_valid(par->reset)) {
+		ret = par->reset;
+		if (ret != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"Couldn't get named gpio 'reset-gpios': %s.\n",
+				strerror(-ret));
+		goto fb_alloc_error;
+	}
+
+	ret = of_property_read_u32(node, "solomon,width", &par->width);
+	if (ret) {
+		dev_err(&client->dev,
+			"Couldn't find 'solomon,width' in device tree.\n");
+		goto panel_init_error;
+	}
+
+	ret = of_property_read_u32(node, "solomon,height", &par->height);
+	if (ret) {
+		dev_err(&client->dev,
+			"Couldn't find 'solomon,height' in device tree.\n");
+		goto panel_init_error;
+	}
+
+	ret = of_property_read_u32(node, "solomon,page-offset",
+				   &par->page_offset);
+	if (ret) {
+		dev_err(&client->dev,
+			"Couldn't find 'solomon,page_offset' in device tree.\n");
+		goto panel_init_error;
+	}
+
+	if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset))
+		par->com_offset = 0;
+
+	if (of_property_read_u32(node, "solomon,prechargep1",
+				 &par->prechargep1))
+		par->prechargep1 = 2;
+
+	if (of_property_read_u32(node, "solomon,prechargep2",
+				 &par->prechargep2))
+		par->prechargep2 = 2;
+
+	par->seg_remap = !of_property_read_bool(node,
+						"solomon,segment-no-remap");
+	par->com_seq = of_property_read_bool(node, "solomon,com-seq");
+	par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap");
+	par->com_invdir = of_property_read_bool(node, "solomon,com-invdir");
+
+	par->contrast = 127;
+	par->vcomh = par->device_info->default_vcomh;
+
+	/* Setup display timing */
+	par->dclk_div = par->device_info->default_dclk_div;
+	par->dclk_frq = par->device_info->default_dclk_frq;
+
+	vmem_size = par->width * par->height;
+
+	vmem = malloc(vmem_size);
+	if (!vmem) {
+		dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
+		ret = -ENOMEM;
+		goto fb_alloc_error;
+	}
+
+	info->fbops = &ssd1307fb_ops;
+	info->line_length = par->width;
+
+	info->xres = par->width;
+	info->yres = par->height;
+
+	/* emulate 8 bit per pixel */
+	info->bits_per_pixel = 8;
+
+	info->red.length = 3;
+	info->red.offset = 0;
+	info->green.length = 3;
+	info->green.offset = 0;
+	info->blue.length = 2;
+	info->blue.offset = 0;
+
+	info->screen_base = (u8 __force __iomem *)vmem;
+
+	ret = gpio_request_one(par->reset,
+			       GPIOF_OUT_INIT_HIGH,
+			       "oled-reset");
+	if (ret) {
+		dev_err(&client->dev,
+			"failed to request gpio %d: %d\n",
+			par->reset, ret);
+		goto reset_oled_error;
+	}
+
+	i2c_set_clientdata(client, info);
+
+	/* Reset the screen */
+	gpio_set_value(par->reset, 0);
+	udelay(4);
+	gpio_set_value(par->reset, 1);
+	udelay(4);
+
+	ret = ssd1307fb_init(par);
+	if (ret)
+		goto reset_oled_error;
+
+	ret = register_framebuffer(info);
+	if (ret) {
+		dev_err(&client->dev, "Couldn't register the framebuffer\n");
+		goto panel_init_error;
+	}
+
+	/* clear display */
+	array = ssd1307fb_alloc_array(par->width * par->height / 8,
+				      SSD1307FB_DATA);
+	if (!array)
+		return -ENOMEM;
+
+	for (i = 0; i < (par->height / 8); i++) {
+		for (j = 0; j < par->width; j++) {
+			u32 array_idx = i * par->width + j;
+			array->data[array_idx] = 0;
+		}
+	}
+
+	ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
+	kfree(array);
+
+	dev_info(&client->dev,
+		 "ssd1307 framebuffer device registered, using %d bytes of video memory\n",
+		 vmem_size);
+
+	return 0;
+
+panel_init_error:
+reset_oled_error:
+fb_alloc_error:
+	free(info);
+	return ret;
+}
+
+static struct driver_d ssd1307fb_driver = {
+	.name = "ssd1307fb",
+	.probe = ssd1307fb_probe,
+	.of_compatible = DRV_OF_COMPAT(ssd1307fb_of_match),
+};
+
+static int ssd1307_init(void)
+{
+	i2c_driver_register(&ssd1307fb_driver);
+	return 0;
+}
+
+device_initcall(ssd1307_init);