dts: update to v4.1-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 2 insertions, 6 deletions

diff --git a/dts/Bindings/arm/gic.txt b/dts/Bindings/arm/gic.txt
index c97484b73e..2da059a479 100644
--- a/dts/Bindings/arm/gic.txt
+++ b/dts/Bindings/arm/gic.txt
@@ -18,6 +18,8 @@ Main node required properties:
 	"arm,arm11mp-gic"
 	"brcm,brahma-b15-gic"
 	"arm,arm1176jzf-devchip-gic"
+	"qcom,msm-8660-qgic"
+	"qcom,msm-qgic2"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source.  The type shall be a <u32> and the value shall be 3.
@@ -56,11 +58,6 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
-- arm,routable-irqs : Total number of gic irq inputs which are not directly
-		  connected from the peripherals, but are routed dynamically
-		  by a crossbar/multiplexer preceding the GIC. The GIC irq
-		  input line is assigned dynamically when the corresponding
-		  peripheral's crossbar line is mapped.
 Example:
 
 	intc: interrupt-controller@fff11000 {
@@ -68,7 +65,6 @@ Example:
 		#interrupt-cells = <3>;
 		#address-cells = <1>;
 		interrupt-controller;
-		arm,routable-irqs = <160>;
 		reg = <0xfff11000 0x1000>,
 		      <0xfff10100 0x100>;
 	};