dts: update to v5.12-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 62 deletions

diff --git a/dts/Bindings/c6x/emifa.txt b/dts/Bindings/c6x/emifa.txt
deleted file mode 100644
index 0ff6e9b9a1..0000000000
--- a/dts/Bindings/c6x/emifa.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-External Memory Interface
--------------------------
-
-The emifa node describes a simple external bus controller found on some C6X
-SoCs. This interface provides external busses with a number of chip selects.
-
-Required properties:
-
-- compatible: must be "ti,c64x+emifa", "simple-bus"
-- reg: register area base and size
-- #address-cells: must be 2 (chip-select + offset)
-- #size-cells: must be 1
-- ranges: mapping from EMIFA space to parent space
-
-
-Optional properties:
-
-- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR
-
-- ti,emifa-burst-priority:
-      Number of memory transfers after which the EMIF will elevate the priority
-      of the oldest command in the command FIFO. Setting this field to 255
-      disables this feature, thereby allowing old commands to stay in the FIFO
-      indefinitely.
-
-- ti,emifa-ce-config:
-      Configuration values for each of the supported chip selects.
-
-Example:
-
-	emifa@70000000 {
-		compatible = "ti,c64x+emifa", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x70000000 0x100>;
-		ranges = <0x2 0x0 0xa0000000 0x00000008
-		          0x3 0x0 0xb0000000 0x00400000
-			  0x4 0x0 0xc0000000 0x10000000
-			  0x5 0x0 0xD0000000 0x10000000>;
-
-		ti,dscr-dev-enable = <13>;
-		ti,emifa-burst-priority = <255>;
-		ti,emifa-ce-config = <0x00240120
-				      0x00240120
-				      0x00240122
-				      0x00240122>;
-
-		flash@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x3 0x0 0x400000>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0 {
-				reg = <0x0 0x400000>;
-				label = "NOR";
-			};
-		};
-	};
-
-This shows a flash chip attached to chip select 3.