diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2020-06-23 12:14:59 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2020-07-05 20:49:06 +0200 |
| commit | abef60363d8ecac66e45853f328afa8eeb9e00fd (patch) | |
| tree | c7d6f1dcf0ef5154b9182da86f1acad048cb7da1 /dts/Bindings/clock | |
| parent | e307bc559a2830b7f695150212ea1b26cdca69fb (diff) | |
| download | barebox-abef60363d8ecac66e45853f328afa8eeb9e00fd.tar.gz barebox-abef60363d8ecac66e45853f328afa8eeb9e00fd.tar.xz | |
dts: update to v5.8-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/clock')
71 files changed, 2353 insertions, 1157 deletions
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml index ed1b2126a8..9a37a357cb 100644 --- a/dts/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +++ b/dts/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -52,12 +52,12 @@ properties: - const: allwinner,sun4i-a10-dram-gates-clk - items: - - const: allwinner,sun5i-a13-dram-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk - items: - - const: allwinner,sun8i-h3-apb0-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk reg: maxItems: 1 diff --git a/dts/Bindings/clock/baikal,bt1-ccu-div.yaml b/dts/Bindings/clock/baikal,bt1-ccu-div.yaml new file mode 100644 index 0000000000..2821425ee4 --- /dev/null +++ b/dts/Bindings/clock/baikal,bt1-ccu-div.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 Clock Control Unit Dividers + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Clocks Control Unit is the core of Baikal-T1 SoC System Controller + responsible for the chip subsystems clocking and resetting. The CCU is + connected with an external fixed rate oscillator, which signal is transformed + into clocks of various frequencies and then propagated to either individual + IP-blocks or to groups of blocks (clock domains). The transformation is done + by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The + later ones are described in this binding. Each clock domain can be also + individually reset by using the domain clocks divider configuration + registers. Baikal-T1 CCU is logically divided into the next components: + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but + in general can provide any frequency supported by the CCU PLLs). + 2) PLLs clocks generators (PLLs). + 3) AXI-bus clock dividers (AXI) - described in this binding file. + 4) System devices reference clock dividers (SYS) - described in this binding + file. + which are connected with each other as shown on the next figure: + + +---------------+ + | Baikal-T1 CCU | + | +----+------|- MIPS P5600 cores + | +-|PLLs|------|- DDR controller + | | +----+ | + +----+ | | | | | + |XTAL|--|-+ | | +---+-| + +----+ | | | +-|AXI|-|- AXI-bus + | | | +---+-| + | | | | + | | +----+---+-|- APB-bus + | +-------|SYS|-|- Low-speed Devices + | +---+-|- High-speed Devices + +---------------+ + + Each sub-block is represented as a separate DT node and has an individual + driver to be bound with. + + In order to create signals of wide range frequencies the external oscillator + output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are + then passed over CCU dividers to create signals required for the target clock + domain (like AXI-bus or System Device consumers). The dividers have the + following structure: + + +--------------+ + CLKIN --|->+----+ 1|\ | + SETCLK--|--|/DIV|->| | | + CLKDIV--|--| | | |-|->CLKLOUT + LOCK----|--+----+ | | | + | |/ | + | | | + EN------|-----------+ | + RST-----|--------------|->RSTOUT + +--------------+ + + where CLKIN is the reference clock coming either from CCU PLLs or from an + external clock oscillator, SETCLK - a command to update the output clock in + accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of + the output clock stabilization, EN - enable/disable the divider block, + RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core + peculiarities the dividers may lack of some functionality depicted on the + figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding + clock provider just doesn't expose either switching functions, or the rate + configuration, or both of them. + + The clock dividers, which output clock is then consumed by the SoC individual + devices, are united into a single clocks provider called System Devices CCU. + Similarly the dividers with output clocks utilized as AXI-bus reference clocks + are called AXI-bus CCU. Both of them use the common clock bindings with no + custom properties. The list of exported clocks and reset signals can be found + in the files: 'include/dt-bindings/clock/bt1-ccu.h' and + 'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU + are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed + to be a children of later one. + +if: + properties: + compatible: + contains: + const: baikal,bt1-ccu-axi + +then: + properties: + clocks: + items: + - description: CCU SATA PLL output clock + - description: CCU PCIe PLL output clock + - description: CCU Ethernet PLL output clock + + clock-names: + items: + - const: sata_clk + - const: pcie_clk + - const: eth_clk + +else: + properties: + clocks: + items: + - description: External reference clock + - description: CCU SATA PLL output clock + - description: CCU PCIe PLL output clock + - description: CCU Ethernet PLL output clock + + clock-names: + items: + - const: ref_clk + - const: sata_clk + - const: pcie_clk + - const: eth_clk + +properties: + compatible: + enum: + - baikal,bt1-ccu-axi + - baikal,bt1-ccu-sys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + +unevaluatedProperties: false + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +examples: + # AXI-bus Clock Control Unit node: + - | + #include <dt-bindings/clock/bt1-ccu.h> + + clock-controller@1f04d030 { + compatible = "baikal,bt1-ccu-axi"; + reg = <0x1f04d030 0x030>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&ccu_pll CCU_SATA_PLL>, + <&ccu_pll CCU_PCIE_PLL>, + <&ccu_pll CCU_ETH_PLL>; + clock-names = "sata_clk", "pcie_clk", "eth_clk"; + }; + # System Devices Clock Control Unit node: + - | + #include <dt-bindings/clock/bt1-ccu.h> + + clock-controller@1f04d060 { + compatible = "baikal,bt1-ccu-sys"; + reg = <0x1f04d060 0x0a0>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clk25m>, + <&ccu_pll CCU_SATA_PLL>, + <&ccu_pll CCU_PCIE_PLL>, + <&ccu_pll CCU_ETH_PLL>; + clock-names = "ref_clk", "sata_clk", "pcie_clk", + "eth_clk"; + }; + # Required Clock Control Unit PLL node: + - | + ccu_pll: clock-controller@1f04d000 { + compatible = "baikal,bt1-ccu-pll"; + reg = <0x1f04d000 0x028>; + #clock-cells = <1>; + + clocks = <&clk25m>; + clock-names = "ref_clk"; + }; +... diff --git a/dts/Bindings/clock/baikal,bt1-ccu-pll.yaml b/dts/Bindings/clock/baikal,bt1-ccu-pll.yaml new file mode 100644 index 0000000000..97131bfa6f --- /dev/null +++ b/dts/Bindings/clock/baikal,bt1-ccu-pll.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 Clock Control Unit PLL + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Clocks Control Unit is the core of Baikal-T1 SoC System Controller + responsible for the chip subsystems clocking and resetting. The CCU is + connected with an external fixed rate oscillator, which signal is transformed + into clocks of various frequencies and then propagated to either individual + IP-blocks or to groups of blocks (clock domains). The transformation is done + by means of PLLs and gateable/non-gateable dividers embedded into the CCU. + It's logically divided into the next components: + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but + in general can provide any frequency supported by the CCU PLLs). + 2) PLLs clocks generators (PLLs) - described in this binding file. + 3) AXI-bus clock dividers (AXI). + 4) System devices reference clock dividers (SYS). + which are connected with each other as shown on the next figure: + + +---------------+ + | Baikal-T1 CCU | + | +----+------|- MIPS P5600 cores + | +-|PLLs|------|- DDR controller + | | +----+ | + +----+ | | | | | + |XTAL|--|-+ | | +---+-| + +----+ | | | +-|AXI|-|- AXI-bus + | | | +---+-| + | | | | + | | +----+---+-|- APB-bus + | +-------|SYS|-|- Low-speed Devices + | +---+-|- High-speed Devices + +---------------+ + + Each CCU sub-block is represented as a separate dts-node and has an + individual driver to be bound with. + + In order to create signals of wide range frequencies the external oscillator + output is primarily connected to a set of CCU PLLs. There are five PLLs + to create a clock for the MIPS P5600 cores, the embedded DDR controller, + SATA, Ethernet and PCIe domains. The last three domains though named by the + biggest system interfaces in fact include nearly all of the rest SoC + peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core + with an interface wrapper (so called safe PLL' clocks switcher) to simplify + the PLL configuration procedure. The PLLs work as depicted on the next + diagram: + + +--------------------------+ + | | + +-->+---+ +---+ +---+ | +---+ 0|\ + CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| | + +---+ +->+---+ +---+ /->+---+ | |--->CLKOUT + CLKOD---------C----------------+ 1| | + +--------C--------------------------->|/ + | | ^ + Rclk-+->+---+ | | + CLKR--->|/NR|-+ | + +---+ | + BYPASS--------------------------------------+ + BWADJ---> + + where Rclk is the reference clock coming from XTAL, NR - reference clock + divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT - + output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment + the binding supports the PLL dividers configuration in accordance with a + requested rate, while bypassing and bandwidth adjustment settings can be + added in future if it gets to be necessary. + + The PLLs CLKOUT is then either directly connected with the corresponding + clocks consumer (like P5600 cores or DDR controller) or passed over a CCU + divider to create a signal required for the clock domain. + + The CCU PLL dts-node uses the common clock bindings with no custom + parameters. The list of exported clocks can be found in + 'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the + Baikal-T1 SoC System Controller its DT node is supposed to be a child of + later one. + +properties: + compatible: + const: baikal,bt1-ccu-pll + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + description: External reference clock + maxItems: 1 + + clock-names: + const: ref_clk + +unevaluatedProperties: false + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +examples: + # Clock Control Unit PLL node: + - | + clock-controller@1f04d000 { + compatible = "baikal,bt1-ccu-pll"; + reg = <0x1f04d000 0x028>; + #clock-cells = <1>; + + clocks = <&clk25m>; + clock-names = "ref_clk"; + }; + # Required external oscillator: + - | + clk25m: clock-oscillator-25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "clk25m"; + }; +... diff --git a/dts/Bindings/clock/bitmain,bm1880-clk.yaml b/dts/Bindings/clock/bitmain,bm1880-clk.yaml index 8559fe8f7e..228c9313df 100644 --- a/dts/Bindings/clock/bitmain,bm1880-clk.yaml +++ b/dts/Bindings/clock/bitmain,bm1880-clk.yaml @@ -65,7 +65,7 @@ examples: - | uart0: serial@58018000 { compatible = "snps,dw-apb-uart"; - reg = <0x0 0x58018000 0x0 0x2000>; + reg = <0x58018000 0x2000>; clocks = <&clk 45>, <&clk 46>; clock-names = "baudclk", "apb_pclk"; interrupts = <0 9 4>; diff --git a/dts/Bindings/clock/calxeda.txt b/dts/Bindings/clock/calxeda.txt deleted file mode 100644 index 0a6ac1bdcd..0000000000 --- a/dts/Bindings/clock/calxeda.txt +++ /dev/null @@ -1,17 +0,0 @@ -Device Tree Clock bindings for Calxeda highbank platform - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be one of the following: - "calxeda,hb-pll-clock" - for a PLL clock - "calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the - A9 clock. - "calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock. - "calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller. -- reg : shall be the control register offset from SYSREGs base for the clock. -- clocks : shall be the input parent clock phandle for the clock. This is - either an oscillator or a pll output. -- #clock-cells : from common clock binding; shall be set to 0. diff --git a/dts/Bindings/clock/calxeda.yaml b/dts/Bindings/clock/calxeda.yaml new file mode 100644 index 0000000000..a34cbf3c9a --- /dev/null +++ b/dts/Bindings/clock/calxeda.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/calxeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device Tree Clock bindings for Calxeda highbank platform + +description: | + This binding covers the Calxeda SoC internal peripheral and bus clocks + as used by peripherals. The clocks live inside the "system register" + region of the SoC, so are typically presented as children of an + "hb-sregs" node. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - calxeda,hb-pll-clock + - calxeda,hb-a9periph-clock + - calxeda,hb-a9bus-clock + - calxeda,hb-emmc-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - clocks + - reg + +additionalProperties: false + +examples: + - | + sregs@3fffc000 { + compatible = "calxeda,hb-sregs"; + reg = <0x3fffc000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll@108 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll@100 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk@104 { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + }; + }; + +... diff --git a/dts/Bindings/clock/cirrus,lochnagar.txt b/dts/Bindings/clock/cirrus,lochnagar.txt deleted file mode 100644 index 52a064c789..0000000000 --- a/dts/Bindings/clock/cirrus,lochnagar.txt +++ /dev/null @@ -1,94 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -This binding document describes the binding for the clock portion of -the driver. - -Also see these documents for generic binding information: - [1] Clock : ../clock/clock-bindings.txt - -And these for relevant defines: - [2] include/dt-bindings/clock/lochnagar.h - -This binding must be part of the Lochnagar MFD binding: - [3] ../mfd/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar1-clk" - "cirrus,lochnagar2-clk" - - - #clock-cells : Must be 1. The first cell indicates the clock - number, see [2] for available clocks and [1]. - -Optional properties: - - - clocks : Must contain an entry for each clock in clock-names. - - clock-names : May contain entries for each of the following - clocks: - - ln-cdc-clkout : Output clock from CODEC card. - - ln-dsp-clkout : Output clock from DSP card. - - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional - input audio clocks from host system. - - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from - external connector. - - ln-spdif-mclk : Optional input audio clock from SPDIF. - - ln-spdif-clkout : Optional input audio clock from SPDIF. - - ln-adat-mclk : Optional input audio clock from ADAT. - - ln-pmic-32k : On board fixed clock. - - ln-clk-12m : On board fixed clock. - - ln-clk-11m : On board fixed clock. - - ln-clk-24m : On board fixed clock. - - ln-clk-22m : On board fixed clock. - - ln-clk-8m : On board fixed clock. - - ln-usb-clk-24m : On board fixed clock. - - ln-usb-clk-12m : On board fixed clock. - - - assigned-clocks : A list of Lochnagar clocks to be reparented, see - [2] for available clocks. - - assigned-clock-parents : Parents to be assigned to the clocks - listed in "assigned-clocks". - -Optional nodes: - - - fixed-clock nodes may be registered for the following on board clocks: - - ln-pmic-32k : 32768 Hz - - ln-clk-12m : 12288000 Hz - - ln-clk-11m : 11298600 Hz - - ln-clk-24m : 24576000 Hz - - ln-clk-22m : 22579200 Hz - - ln-clk-8m : 8192000 Hz - - ln-usb-clk-24m : 24576000 Hz - - ln-usb-clk-12m : 12288000 Hz - -Example: - -lochnagar { - lochnagar-clk { - compatible = "cirrus,lochnagar2-clk"; - - #clock-cells = <1>; - - clocks = <&clk-audio>, <&clk_pmic>; - clock-names = "ln-gf-mclk2", "ln-pmic-32k"; - - assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>, - <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>; - assigned-clock-parents = <&clk-audio>, - <&clk-pmic>; - }; - - clk-pmic: clk-pmic { - compatible = "fixed-clock"; - clock-cells = <0>; - clock-frequency = <32768>; - }; -}; diff --git a/dts/Bindings/clock/cirrus,lochnagar.yaml b/dts/Bindings/clock/cirrus,lochnagar.yaml new file mode 100644 index 0000000000..59de125647 --- /dev/null +++ b/dts/Bindings/clock/cirrus,lochnagar.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the clock portion of the + driver. + + Also see these documents for generic binding information: + [1] Clock : ../clock/clock-bindings.txt + + And these for relevant defines: + [2] include/dt-bindings/clock/lochnagar.h + + This binding must be part of the Lochnagar MFD binding: + [3] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar1-clk + - cirrus,lochnagar2-clk + + '#clock-cells': + description: + The first cell indicates the clock number, see [2] for available + clocks and [1]. + const: 1 + + clock-names: + items: + enum: + - ln-cdc-clkout # Output clock from CODEC card. + - ln-dsp-clkout # Output clock from DSP card. + - ln-gf-mclk1 # Optional input clock from host system. + - ln-gf-mclk2 # Optional input clock from host system. + - ln-gf-mclk3 # Optional input clock from host system. + - ln-gf-mclk4 # Optional input clock from host system. + - ln-psia1-mclk # Optional input clock from external connector. + - ln-psia2-mclk # Optional input clock from external connector. + - ln-spdif-mclk # Optional input clock from SPDIF. + - ln-spdif-clkout # Optional input clock from SPDIF. + - ln-adat-mclk # Optional input clock from ADAT. + - ln-pmic-32k # On board fixed clock. + - ln-clk-12m # On board fixed clock. + - ln-clk-11m # On board fixed clock. + - ln-clk-24m # On board fixed clock. + - ln-clk-22m # On board fixed clock. + - ln-clk-8m # On board fixed clock. + - ln-usb-clk-24m # On board fixed clock. + - ln-usb-clk-12m # On board fixed clock. + minItems: 1 + maxItems: 19 + + clocks: true + assigned-clocks: true + assigned-clock-parents: true + +additionalProperties: false + +required: + - compatible + - '#clock-cells' diff --git a/dts/Bindings/clock/fixed-factor-clock.yaml b/dts/Bindings/clock/fixed-factor-clock.yaml index b567f8092f..f415845b38 100644 --- a/dts/Bindings/clock/fixed-factor-clock.yaml +++ b/dts/Bindings/clock/fixed-factor-clock.yaml @@ -24,9 +24,8 @@ properties: clock-div: description: Fixed divider - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 clock-mult: description: Fixed multiplier diff --git a/dts/Bindings/clock/fsl,plldig.yaml b/dts/Bindings/clock/fsl,plldig.yaml index a203d5d498..9ac716dfa6 100644 --- a/dts/Bindings/clock/fsl,plldig.yaml +++ b/dts/Bindings/clock/fsl,plldig.yaml @@ -28,15 +28,14 @@ properties: const: 0 fsl,vco-hz: - description: Optional for VCO frequency of the PLL in Hertz. - The VCO frequency of this PLL cannot be changed during runtime - only at startup. Therefore, the output frequencies are very - limited and might not even closely match the requested frequency. - To work around this restriction the user may specify its own - desired VCO frequency for the PLL. - minimum: 650000000 - maximum: 1300000000 - default: 1188000000 + description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency + of this PLL cannot be changed during runtime only at startup. Therefore, + the output frequencies are very limited and might not even closely match + the requested frequency. To work around this restriction the user may specify + its own desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 required: - compatible @@ -51,7 +50,7 @@ examples: - | dpclk: clock-display@f1f0000 { compatible = "fsl,ls1028a-plldig"; - reg = <0x0 0xf1f0000 0x0 0xffff>; + reg = <0xf1f0000 0xffff>; #clock-cells = <0>; clocks = <&osc_27m>; }; diff --git a/dts/Bindings/clock/idt,versaclock5.txt b/dts/Bindings/clock/idt,versaclock5.txt index 05a245c9df..bcff681a4b 100644 --- a/dts/Bindings/clock/idt,versaclock5.txt +++ b/dts/Bindings/clock/idt,versaclock5.txt @@ -12,6 +12,7 @@ Required properties: "idt,5p49v5933" "idt,5p49v5935" "idt,5p49v6901" + "idt,5p49v6965" - reg: i2c device address, shall be 0x68 or 0x6a. - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, diff --git a/dts/Bindings/clock/imx1-clock.txt b/dts/Bindings/clock/imx1-clock.txt deleted file mode 100644 index 9823baf7ac..0000000000 --- a/dts/Bindings/clock/imx1-clock.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Clock bindings for Freescale i.MX1 CPUs - -Required properties: -- compatible: Should be "fsl,imx1-ccm". -- reg: Address and length of the register set. -- #clock-cells: Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h -for the full list of i.MX1 clock IDs. - -Examples: - clks: ccm@21b000 { - #clock-cells = <1>; - compatible = "fsl,imx1-ccm"; - reg = <0x0021b000 0x1000>; - }; - - pwm: pwm@208000 { - #pwm-cells = <2>; - compatible = "fsl,imx1-pwm"; - reg = <0x00208000 0x1000>; - interrupts = <34>; - clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/dts/Bindings/clock/imx1-clock.yaml b/dts/Bindings/clock/imx1-clock.yaml new file mode 100644 index 0000000000..f4833a29b7 --- /dev/null +++ b/dts/Bindings/clock/imx1-clock.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx1-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX1 CPUs + +maintainers: + - Alexander Shiyan <shc_work@mail.ru> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h + for the full list of i.MX1 clock IDs. + +properties: + compatible: + const: fsl,imx1-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx1-clock.h> + + clock-controller@21b000 { + #clock-cells = <1>; + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + }; + + pwm@208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; diff --git a/dts/Bindings/clock/imx21-clock.txt b/dts/Bindings/clock/imx21-clock.txt deleted file mode 100644 index 806f63d628..0000000000 --- a/dts/Bindings/clock/imx21-clock.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Clock bindings for Freescale i.MX21 - -Required properties: -- compatible : Should be "fsl,imx21-ccm". -- reg : Address and length of the register set. -- interrupts : Should contain CCM interrupt. -- #clock-cells: Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h -for the full list of i.MX21 clock IDs. - -Examples: - clks: ccm@10027000{ - compatible = "fsl,imx21-ccm"; - reg = <0x10027000 0x800>; - #clock-cells = <1>; - }; - - uart1: serial@1000a000 { - compatible = "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, - <&clks IMX21_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/dts/Bindings/clock/imx21-clock.yaml b/dts/Bindings/clock/imx21-clock.yaml new file mode 100644 index 0000000000..518ad9a473 --- /dev/null +++ b/dts/Bindings/clock/imx21-clock.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx21-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX21 + +maintainers: + - Alexander Shiyan <shc_work@mail.ru> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h + for the full list of i.MX21 clock IDs. + +properties: + compatible: + const: fsl,imx21-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx21-clock.h> + + clock-controller@10027000 { + compatible = "fsl,imx21-ccm"; + reg = <0x10027000 0x800>; + #clock-cells = <1>; + }; + + serial@1000a000 { + compatible = "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, + <&clks IMX21_CLK_PER1>; + clock-names = "ipg", "per"; + }; diff --git a/dts/Bindings/clock/imx23-clock.txt b/dts/Bindings/clock/imx23-clock.txt deleted file mode 100644 index 8385348d3b..0000000000 --- a/dts/Bindings/clock/imx23-clock.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Clock bindings for Freescale i.MX23 - -Required properties: -- compatible: Should be "fsl,imx23-clkctrl" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX23 -clocks and IDs. - - Clock ID - ------------------ - ref_xtal 0 - pll 1 - ref_cpu 2 - ref_emi 3 - ref_pix 4 - ref_io 5 - saif_sel 6 - lcdif_sel 7 - gpmi_sel 8 - ssp_sel 9 - emi_sel 10 - cpu 11 - etm_sel 12 - cpu_pll 13 - cpu_xtal 14 - hbus 15 - xbus 16 - lcdif_div 17 - ssp_div 18 - gpmi_div 19 - emi_pll 20 - emi_xtal 21 - etm_div 22 - saif_div 23 - clk32k_div 24 - rtc 25 - adc 26 - spdif_div 27 - clk32k 28 - dri 29 - pwm 30 - filt 31 - uart 32 - ssp 33 - gpmi 34 - spdif 35 - emi 36 - saif 37 - lcdif 38 - etm 39 - usb 40 - usb_phy 41 - -Examples: - -clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; - reg = <0x80040000 0x2000>; - #clock-cells = <1>; -}; - -auart0: serial@8006c000 { - compatible = "fsl,imx23-auart"; - reg = <0x8006c000 0x2000>; - interrupts = <24 25 23>; - clocks = <&clks 32>; -}; diff --git a/dts/Bindings/clock/imx23-clock.yaml b/dts/Bindings/clock/imx23-clock.yaml new file mode 100644 index 0000000000..66cb238a10 --- /dev/null +++ b/dts/Bindings/clock/imx23-clock.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx23-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX23 + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX23 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll 1 + ref_cpu 2 + ref_emi 3 + ref_pix 4 + ref_io 5 + saif_sel 6 + lcdif_sel 7 + gpmi_sel 8 + ssp_sel 9 + emi_sel 10 + cpu 11 + etm_sel 12 + cpu_pll 13 + cpu_xtal 14 + hbus 15 + xbus 16 + lcdif_div 17 + ssp_div 18 + gpmi_div 19 + emi_pll 20 + emi_xtal 21 + etm_div 22 + saif_div 23 + clk32k_div 24 + rtc 25 + adc 26 + spdif_div 27 + clk32k 28 + dri 29 + pwm 30 + filt 31 + uart 32 + ssp 33 + gpmi 34 + spdif 35 + emi 36 + saif 37 + lcdif 38 + etm 39 + usb 40 + usb_phy 41 + +properties: + compatible: + const: fsl,imx23-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; + + serial@8006c000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; + clocks = <&clks 32>; + }; diff --git a/dts/Bindings/clock/imx25-clock.txt b/dts/Bindings/clock/imx25-clock.txt deleted file mode 100644 index f8135ea9ca..0000000000 --- a/dts/Bindings/clock/imx25-clock.txt +++ /dev/null @@ -1,160 +0,0 @@ -* Clock bindings for Freescale i.MX25 - -Required properties: -- compatible: Should be "fsl,imx25-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX25 -clocks and IDs. - - Clock ID - --------------------------- - dummy 0 - osc 1 - mpll 2 - upll 3 - mpll_cpu_3_4 4 - cpu_sel 5 - cpu 6 - ahb 7 - usb_div 8 - ipg 9 - per0_sel 10 - per1_sel 11 - per2_sel 12 - per3_sel 13 - per4_sel 14 - per5_sel 15 - per6_sel 16 - per7_sel 17 - per8_sel 18 - per9_sel 19 - per10_sel 20 - per11_sel 21 - per12_sel 22 - per13_sel 23 - per14_sel 24 - per15_sel 25 - per0 26 - per1 27 - per2 28 - per3 29 - per4 30 - per5 31 - per6 32 - per7 33 - per8 34 - per9 35 - per10 36 - per11 37 - per12 38 - per13 39 - per14 40 - per15 41 - csi_ipg_per 42 - epit_ipg_per 43 - esai_ipg_per 44 - esdhc1_ipg_per 45 - esdhc2_ipg_per 46 - gpt_ipg_per 47 - i2c_ipg_per 48 - lcdc_ipg_per 49 - nfc_ipg_per 50 - owire_ipg_per 51 - pwm_ipg_per 52 - sim1_ipg_per 53 - sim2_ipg_per 54 - ssi1_ipg_per 55 - ssi2_ipg_per 56 - uart_ipg_per 57 - ata_ahb 58 - reserved 59 - csi_ahb 60 - emi_ahb 61 - esai_ahb 62 - esdhc1_ahb 63 - esdhc2_ahb 64 - fec_ahb 65 - lcdc_ahb 66 - rtic_ahb 67 - sdma_ahb 68 - slcdc_ahb 69 - usbotg_ahb 70 - reserved 71 - reserved 72 - reserved 73 - reserved 74 - can1_ipg 75 - can2_ipg 76 - csi_ipg 77 - cspi1_ipg 78 - cspi2_ipg 79 - cspi3_ipg 80 - dryice_ipg 81 - ect_ipg 82 - epit1_ipg 83 - epit2_ipg 84 - reserved 85 - esdhc1_ipg 86 - esdhc2_ipg 87 - fec_ipg 88 - reserved 89 - reserved 90 - reserved 91 - gpt1_ipg 92 - gpt2_ipg 93 - gpt3_ipg 94 - gpt4_ipg 95 - reserved 96 - reserved 97 - reserved 98 - iim_ipg 99 - reserved 100 - reserved 101 - kpp_ipg 102 - lcdc_ipg 103 - reserved 104 - pwm1_ipg 105 - pwm2_ipg 106 - pwm3_ipg 107 - pwm4_ipg 108 - rngb_ipg 109 - reserved 110 - scc_ipg 111 - sdma_ipg 112 - sim1_ipg 113 - sim2_ipg 114 - slcdc_ipg 115 - spba_ipg 116 - ssi1_ipg 117 - ssi2_ipg 118 - tsc_ipg 119 - uart1_ipg 120 - uart2_ipg 121 - uart3_ipg 122 - uart4_ipg 123 - uart5_ipg 124 - reserved 125 - wdt_ipg 126 - cko_div 127 - cko_sel 128 - cko 129 - -Examples: - -clks: ccm@53f80000 { - compatible = "fsl,imx25-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>; -}; - -uart1: serial@43f90000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 79>, <&clks 50>; - clock-names = "ipg", "per"; -}; diff --git a/dts/Bindings/clock/imx25-clock.yaml b/dts/Bindings/clock/imx25-clock.yaml new file mode 100644 index 0000000000..2a2b10778e --- /dev/null +++ b/dts/Bindings/clock/imx25-clock.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx25-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX25 + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX25 + clocks and IDs. + + Clock ID + -------------------------- + dummy 0 + osc 1 + mpll 2 + upll 3 + mpll_cpu_3_4 4 + cpu_sel 5 + cpu 6 + ahb 7 + usb_div 8 + ipg 9 + per0_sel 10 + per1_sel 11 + per2_sel 12 + per3_sel 13 + per4_sel 14 + per5_sel 15 + per6_sel 16 + per7_sel 17 + per8_sel 18 + per9_sel 19 + per10_sel 20 + per11_sel 21 + per12_sel 22 + per13_sel 23 + per14_sel 24 + per15_sel 25 + per0 26 + per1 27 + per2 28 + per3 29 + per4 30 + per5 31 + per6 32 + per7 33 + per8 34 + per9 35 + per10 36 + per11 37 + per12 38 + per13 39 + per14 40 + per15 41 + csi_ipg_per 42 + epit_ipg_per 43 + esai_ipg_per 44 + esdhc1_ipg_per 45 + esdhc2_ipg_per 46 + gpt_ipg_per 47 + i2c_ipg_per 48 + lcdc_ipg_per 49 + nfc_ipg_per 50 + owire_ipg_per 51 + pwm_ipg_per 52 + sim1_ipg_per 53 + sim2_ipg_per 54 + ssi1_ipg_per 55 + ssi2_ipg_per 56 + uart_ipg_per 57 + ata_ahb 58 + reserved 59 + csi_ahb 60 + emi_ahb 61 + esai_ahb 62 + esdhc1_ahb 63 + esdhc2_ahb 64 + fec_ahb 65 + lcdc_ahb 66 + rtic_ahb 67 + sdma_ahb 68 + slcdc_ahb 69 + usbotg_ahb 70 + reserved 71 + reserved 72 + reserved 73 + reserved 74 + can1_ipg 75 + can2_ipg 76 + csi_ipg 77 + cspi1_ipg 78 + cspi2_ipg 79 + cspi3_ipg 80 + dryice_ipg 81 + ect_ipg 82 + epit1_ipg 83 + epit2_ipg 84 + reserved 85 + esdhc1_ipg 86 + esdhc2_ipg 87 + fec_ipg 88 + reserved 89 + reserved 90 + reserved 91 + gpt1_ipg 92 + gpt2_ipg 93 + gpt3_ipg 94 + gpt4_ipg 95 + reserved 96 + reserved 97 + reserved 98 + iim_ipg 99 + reserved 100 + reserved 101 + kpp_ipg 102 + lcdc_ipg 103 + reserved 104 + pwm1_ipg 105 + pwm2_ipg 106 + pwm3_ipg 107 + pwm4_ipg 108 + rngb_ipg 109 + reserved 110 + scc_ipg 111 + sdma_ipg 112 + sim1_ipg 113 + sim2_ipg 114 + slcdc_ipg 115 + spba_ipg 116 + ssi1_ipg 117 + ssi2_ipg 118 + tsc_ipg 119 + uart1_ipg 120 + uart2_ipg 121 + uart3_ipg 122 + uart4_ipg 123 + uart5_ipg 124 + reserved 125 + wdt_ipg 126 + cko_div 127 + cko_sel 128 + cko 129 + +properties: + compatible: + const: fsl,imx25-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 79>, <&clks 50>; + clock-names = "ipg", "per"; + }; diff --git a/dts/Bindings/clock/imx27-clock.txt b/dts/Bindings/clock/imx27-clock.txt deleted file mode 100644 index 4c95c048d3..0000000000 --- a/dts/Bindings/clock/imx27-clock.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Clock bindings for Freescale i.MX27 - -Required properties: -- compatible: Should be "fsl,imx27-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h -for the full list of i.MX27 clock IDs. - -Examples: - clks: ccm@10027000{ - compatible = "fsl,imx27-ccm"; - reg = <0x10027000 0x1000>; - #clock-cells = <1>; - }; - - uart1: serial@1000a000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, - <&clks IMX27_CLK_PER1_GATE>; - clock-names = "ipg", "per"; - }; diff --git a/dts/Bindings/clock/imx27-clock.yaml b/dts/Bindings/clock/imx27-clock.yaml new file mode 100644 index 0000000000..b5f3ed084e --- /dev/null +++ b/dts/Bindings/clock/imx27-clock.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx27-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX27 + +maintainers: + - Fabio Estevam <fabio.estevam@freescale.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h + for the full list of i.MX27 clock IDs. + +properties: + compatible: + const: fsl,imx27-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx27-clock.h> + + clock-controller@10027000 { + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + serial@1000a000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/dts/Bindings/clock/imx28-clock.txt b/dts/Bindings/clock/imx28-clock.txt deleted file mode 100644 index d84a37d288..0000000000 --- a/dts/Bindings/clock/imx28-clock.txt +++ /dev/null @@ -1,93 +0,0 @@ -* Clock bindings for Freescale i.MX28 - -Required properties: -- compatible: Should be "fsl,imx28-clkctrl" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX28 -clocks and IDs. - - Clock ID - ------------------ - ref_xtal 0 - pll0 1 - pll1 2 - pll2 3 - ref_cpu 4 - ref_emi 5 - ref_io0 6 - ref_io1 7 - ref_pix 8 - ref_hsadc 9 - ref_gpmi 10 - saif0_sel 11 - saif1_sel 12 - gpmi_sel 13 - ssp0_sel 14 - ssp1_sel 15 - ssp2_sel 16 - ssp3_sel 17 - emi_sel 18 - etm_sel 19 - lcdif_sel 20 - cpu 21 - ptp_sel 22 - cpu_pll 23 - cpu_xtal 24 - hbus 25 - xbus 26 - ssp0_div 27 - ssp1_div 28 - ssp2_div 29 - ssp3_div 30 - gpmi_div 31 - emi_pll 32 - emi_xtal 33 - lcdif_div 34 - etm_div 35 - ptp 36 - saif0_div 37 - saif1_div 38 - clk32k_div 39 - rtc 40 - lradc 41 - spdif_div 42 - clk32k 43 - pwm 44 - uart 45 - ssp0 46 - ssp1 47 - ssp2 48 - ssp3 49 - gpmi 50 - spdif 51 - emi 52 - saif0 53 - saif1 54 - lcdif 55 - etm 56 - fec 57 - can0 58 - can1 59 - usb0 60 - usb1 61 - usb0_phy 62 - usb1_phy 63 - enet_out 64 - -Examples: - -clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; - reg = <0x80040000 0x2000>; - #clock-cells = <1>; -}; - -auart0: serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; - clocks = <&clks 45>; -}; diff --git a/dts/Bindings/clock/imx28-clock.yaml b/dts/Bindings/clock/imx28-clock.yaml new file mode 100644 index 0000000000..72328d5ca0 --- /dev/null +++ b/dts/Bindings/clock/imx28-clock.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx28-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX28 + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX28 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll0 1 + pll1 2 + pll2 3 + ref_cpu 4 + ref_emi 5 + ref_io0 6 + ref_io1 7 + ref_pix 8 + ref_hsadc 9 + ref_gpmi 10 + saif0_sel 11 + saif1_sel 12 + gpmi_sel 13 + ssp0_sel 14 + ssp1_sel 15 + ssp2_sel 16 + ssp3_sel 17 + emi_sel 18 + etm_sel 19 + lcdif_sel 20 + cpu 21 + ptp_sel 22 + cpu_pll 23 + cpu_xtal 24 + hbus 25 + xbus 26 + ssp0_div 27 + ssp1_div 28 + ssp2_div 29 + ssp3_div 30 + gpmi_div 31 + emi_pll 32 + emi_xtal 33 + lcdif_div 34 + etm_div 35 + ptp 36 + saif0_div 37 + saif1_div 38 + clk32k_div 39 + rtc 40 + lradc 41 + spdif_div 42 + clk32k 43 + pwm 44 + uart 45 + ssp0 46 + ssp1 47 + ssp2 48 + ssp3 49 + gpmi 50 + spdif 51 + emi 52 + saif0 53 + saif1 54 + lcdif 55 + etm 56 + fec 57 + can0 58 + can1 59 + usb0 60 + usb1 61 + usb0_phy 62 + usb1_phy 63 + enet_out 64 + +properties: + compatible: + const: fsl,imx28-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx28-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; + + serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + clocks = <&clks 45>; + }; diff --git a/dts/Bindings/clock/imx31-clock.txt b/dts/Bindings/clock/imx31-clock.txt deleted file mode 100644 index 0a291090e5..0000000000 --- a/dts/Bindings/clock/imx31-clock.txt +++ /dev/null @@ -1,90 +0,0 @@ -* Clock bindings for Freescale i.MX31 - -Required properties: -- compatible: Should be "fsl,imx31-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX31 -clocks and IDs. - - Clock ID - ----------------------- - dummy 0 - ckih 1 - ckil 2 - mpll 3 - spll 4 - upll 5 - mcu_main 6 - hsp 7 - ahb 8 - nfc 9 - ipg 10 - per_div 11 - per 12 - csi_sel 13 - fir_sel 14 - csi_div 15 - usb_div_pre 16 - usb_div_post 17 - fir_div_pre 18 - fir_div_post 19 - sdhc1_gate 20 - sdhc2_gate 21 - gpt_gate 22 - epit1_gate 23 - epit2_gate 24 - iim_gate 25 - ata_gate 26 - sdma_gate 27 - cspi3_gate 28 - rng_gate 29 - uart1_gate 30 - uart2_gate 31 - ssi1_gate 32 - i2c1_gate 33 - i2c2_gate 34 - i2c3_gate 35 - hantro_gate 36 - mstick1_gate 37 - mstick2_gate 38 - csi_gate 39 - rtc_gate 40 - wdog_gate 41 - pwm_gate 42 - sim_gate 43 - ect_gate 44 - usb_gate 45 - kpp_gate 46 - ipu_gate 47 - uart3_gate 48 - uart4_gate 49 - uart5_gate 50 - owire_gate 51 - ssi2_gate 52 - cspi1_gate 53 - cspi2_gate 54 - gacc_gate 55 - emi_gate 56 - rtic_gate 57 - firi_gate 58 - -Examples: - -clks: ccm@53f80000{ - compatible = "fsl,imx31-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>, <53>; - #clock-cells = <1>; -}; - -uart1: serial@43f90000 { - compatible = "fsl,imx31-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 10>, <&clks 30>; - clock-names = "ipg", "per"; -}; diff --git a/dts/Bindings/clock/imx31-clock.yaml b/dts/Bindings/clock/imx31-clock.yaml new file mode 100644 index 0000000000..1b6f75d392 --- /dev/null +++ b/dts/Bindings/clock/imx31-clock.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx31-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX31 + +maintainers: + - Fabio Estevam <fabio.estevam@freescale.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX31 + clocks and IDs. + + Clock ID + ----------------------- + dummy 0 + ckih 1 + ckil 2 + mpll 3 + spll 4 + upll 5 + mcu_main 6 + hsp 7 + ahb 8 + nfc 9 + ipg 10 + per_div 11 + per 12 + csi_sel 13 + fir_sel 14 + csi_div 15 + usb_div_pre 16 + usb_div_post 17 + fir_div_pre 18 + fir_div_post 19 + sdhc1_gate 20 + sdhc2_gate 21 + gpt_gate 22 + epit1_gate 23 + epit2_gate 24 + iim_gate 25 + ata_gate 26 + sdma_gate 27 + cspi3_gate 28 + rng_gate 29 + uart1_gate 30 + uart2_gate 31 + ssi1_gate 32 + i2c1_gate 33 + i2c2_gate 34 + i2c3_gate 35 + hantro_gate 36 + mstick1_gate 37 + mstick2_gate 38 + csi_gate 39 + rtc_gate 40 + wdog_gate 41 + pwm_gate 42 + sim_gate 43 + ect_gate 44 + usb_gate 45 + kpp_gate 46 + ipu_gate 47 + uart3_gate 48 + uart4_gate 49 + uart5_gate 50 + owire_gate 51 + ssi2_gate 52 + cspi1_gate 53 + cspi2_gate 54 + gacc_gate 55 + emi_gate 56 + rtic_gate 57 + firi_gate 58 + +properties: + compatible: + const: fsl,imx31-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for DVFS when a frequency change is requested, request 2 is + to generate interrupt for DPTC when a voltage change is requested. + items: + - description: CCM DVFS interrupt request 1 + - description: CCM DPTC interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>, <53>; + #clock-cells = <1>; + }; + + serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 10>, <&clks 30>; + clock-names = "ipg", "per"; + }; diff --git a/dts/Bindings/clock/imx35-clock.txt b/dts/Bindings/clock/imx35-clock.txt deleted file mode 100644 index f49783213c..0000000000 --- a/dts/Bindings/clock/imx35-clock.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Clock bindings for Freescale i.MX35 - -Required properties: -- compatible: Should be "fsl,imx35-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX35 -clocks and IDs. - - Clock ID - --------------------------- - ckih 0 - mpll 1 - ppll 2 - mpll_075 3 - arm 4 - hsp 5 - hsp_div 6 - hsp_sel 7 - ahb 8 - ipg 9 - arm_per_div 10 - ahb_per_div 11 - ipg_per 12 - uart_sel 13 - uart_div 14 - esdhc_sel 15 - esdhc1_div 16 - esdhc2_div 17 - esdhc3_div 18 - spdif_sel 19 - spdif_div_pre 20 - spdif_div_post 21 - ssi_sel 22 - ssi1_div_pre 23 - ssi1_div_post 24 - ssi2_div_pre 25 - ssi2_div_post 26 - usb_sel 27 - usb_div 28 - nfc_div 29 - asrc_gate 30 - pata_gate 31 - audmux_gate 32 - can1_gate 33 - can2_gate 34 - cspi1_gate 35 - cspi2_gate 36 - ect_gate 37 - edio_gate 38 - emi_gate 39 - epit1_gate 40 - epit2_gate 41 - esai_gate 42 - esdhc1_gate 43 - esdhc2_gate 44 - esdhc3_gate 45 - fec_gate 46 - gpio1_gate 47 - gpio2_gate 48 - gpio3_gate 49 - gpt_gate 50 - i2c1_gate 51 - i2c2_gate 52 - i2c3_gate 53 - iomuxc_gate 54 - ipu_gate 55 - kpp_gate 56 - mlb_gate 57 - mshc_gate 58 - owire_gate 59 - pwm_gate 60 - rngc_gate 61 - rtc_gate 62 - rtic_gate 63 - scc_gate 64 - sdma_gate 65 - spba_gate 66 - spdif_gate 67 - ssi1_gate 68 - ssi2_gate 69 - uart1_gate 70 - uart2_gate 71 - uart3_gate 72 - usbotg_gate 73 - wdog_gate 74 - max_gate 75 - admux_gate 76 - csi_gate 77 - csi_div 78 - csi_sel 79 - iim_gate 80 - gpu2d_gate 81 - ckli_gate 82 - -Examples: - -clks: ccm@53f80000 { - compatible = "fsl,imx35-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>; - #clock-cells = <1>; -}; - -esdhc1: esdhc@53fb4000 { - compatible = "fsl,imx35-esdhc"; - reg = <0x53fb4000 0x4000>; - interrupts = <7>; - clocks = <&clks 9>, <&clks 8>, <&clks 43>; - clock-names = "ipg", "ahb", "per"; -}; diff --git a/dts/Bindings/clock/imx35-clock.yaml b/dts/Bindings/clock/imx35-clock.yaml new file mode 100644 index 0000000000..bd871da6fc --- /dev/null +++ b/dts/Bindings/clock/imx35-clock.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx35-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX35 + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX35 + clocks and IDs. + + Clock ID + --------------------------- + ckih 0 + mpll 1 + ppll 2 + mpll_075 3 + arm 4 + hsp 5 + hsp_div 6 + hsp_sel 7 + ahb 8 + ipg 9 + arm_per_div 10 + ahb_per_div 11 + ipg_per 12 + uart_sel 13 + uart_div 14 + esdhc_sel 15 + esdhc1_div 16 + esdhc2_div 17 + esdhc3_div 18 + spdif_sel 19 + spdif_div_pre 20 + spdif_div_post 21 + ssi_sel 22 + ssi1_div_pre 23 + ssi1_div_post 24 + ssi2_div_pre 25 + ssi2_div_post 26 + usb_sel 27 + usb_div 28 + nfc_div 29 + asrc_gate 30 + pata_gate 31 + audmux_gate 32 + can1_gate 33 + can2_gate 34 + cspi1_gate 35 + cspi2_gate 36 + ect_gate 37 + edio_gate 38 + emi_gate 39 + epit1_gate 40 + epit2_gate 41 + esai_gate 42 + esdhc1_gate 43 + esdhc2_gate 44 + esdhc3_gate 45 + fec_gate 46 + gpio1_gate 47 + gpio2_gate 48 + gpio3_gate 49 + gpt_gate 50 + i2c1_gate 51 + i2c2_gate 52 + i2c3_gate 53 + iomuxc_gate 54 + ipu_gate 55 + kpp_gate 56 + mlb_gate 57 + mshc_gate 58 + owire_gate 59 + pwm_gate 60 + rngc_gate 61 + rtc_gate 62 + rtic_gate 63 + scc_gate 64 + sdma_gate 65 + spba_gate 66 + spdif_gate 67 + ssi1_gate 68 + ssi2_gate 69 + uart1_gate 70 + uart2_gate 71 + uart3_gate 72 + usbotg_gate 73 + wdog_gate 74 + max_gate 75 + admux_gate 76 + csi_gate 77 + csi_div 78 + csi_sel 79 + iim_gate 80 + gpu2d_gate 81 + ckli_gate 82 + +properties: + compatible: + const: fsl,imx35-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + esdhc@53fb4000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <7>; + clocks = <&clks 9>, <&clks 8>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; + }; diff --git a/dts/Bindings/clock/imx5-clock.txt b/dts/Bindings/clock/imx5-clock.txt deleted file mode 100644 index a24ca9e582..0000000000 --- a/dts/Bindings/clock/imx5-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Clock bindings for Freescale i.MX5 - -Required properties: -- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53 -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h -for the full list of i.MX5 clock IDs. - -Examples (for mx53): - -clks: ccm@53fd4000{ - compatible = "fsl,imx53-ccm"; - reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; - #clock-cells = <1>; -}; - -can1: can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; - reg = <0x53fc8000 0x4000>; - interrupts = <82>; - clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; - clock-names = "ipg", "per"; -}; diff --git a/dts/Bindings/clock/imx5-clock.yaml b/dts/Bindings/clock/imx5-clock.yaml new file mode 100644 index 0000000000..f5c2b3d7a9 --- /dev/null +++ b/dts/Bindings/clock/imx5-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx5-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX5 + +maintainers: + - Fabio Estevam <fabio.estevam@freescale.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h + for the full list of i.MX5 clock IDs. + +properties: + compatible: + enum: + - fsl,imx53-ccm + - fsl,imx51-ccm + - fsl,imx50-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@53fd4000{ + compatible = "fsl,imx53-ccm"; + reg = <0x53fd4000 0x4000>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, + <0 72 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; + + can@53fc8000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/dts/Bindings/clock/imx6q-clock.txt b/dts/Bindings/clock/imx6q-clock.txt deleted file mode 100644 index 13d36d4c69..0000000000 --- a/dts/Bindings/clock/imx6q-clock.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Clock bindings for Freescale i.MX6 Quad - -Required properties: -- compatible: Should be "fsl,imx6q-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -Optional properties: -- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal - on power off. - Use this property if the SoC should be powered off by external power - management IC (PMIC) triggered via PMIC_STBY_REQ signal. - Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should - be using "syscon-poweroff" driver instead. -- clocks: list of clock specifiers, must contain an entry for each entry - in clock-names -- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h -for the full list of i.MX6 Quad and DualLite clock IDs. - -Examples: - -#include <dt-bindings/clock/imx6qdl-clock.h> - -clks: ccm@20c4000 { - compatible = "fsl,imx6q-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <0 87 0x04 0 88 0x04>; - #clock-cells = <1>; -}; - -uart1: serial@2020000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = <0 26 0x04>; - clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; - clock-names = "ipg", "per"; -}; diff --git a/dts/Bindings/clock/imx6q-clock.yaml b/dts/Bindings/clock/imx6q-clock.yaml new file mode 100644 index 0000000000..92a8e545e2 --- /dev/null +++ b/dts/Bindings/clock/imx6q-clock.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 Quad + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6q-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 24m osc + - description: 32k osc + - description: ckih1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: osc + - const: ckil + - const: ckih1 + - const: anaclk1 + - const: anaclk2 + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/imx6sl-clock.txt b/dts/Bindings/clock/imx6sl-clock.txt deleted file mode 100644 index 15e40bdf14..0000000000 --- a/dts/Bindings/clock/imx6sl-clock.txt +++ /dev/null @@ -1,10 +0,0 @@ -* Clock bindings for Freescale i.MX6 SoloLite - -Required properties: -- compatible: Should be "fsl,imx6sl-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h -for the full list of i.MX6 SoloLite clock IDs. diff --git a/dts/Bindings/clock/imx6sl-clock.yaml b/dts/Bindings/clock/imx6sl-clock.yaml new file mode 100644 index 0000000000..c97bf95b41 --- /dev/null +++ b/dts/Bindings/clock/imx6sl-clock.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloLite + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sl-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sl-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/imx6sll-clock.txt b/dts/Bindings/clock/imx6sll-clock.txt deleted file mode 100644 index fee849d5fd..0000000000 --- a/dts/Bindings/clock/imx6sll-clock.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Clock bindings for Freescale i.MX6 SLL - -Required properties: -- compatible: Should be "fsl,imx6sll-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h -for the full list of i.MX6 SLL clock IDs. - -Examples: - -#include <dt-bindings/clock/imx6sll-clock.h> - -clks: clock-controller@20c4000 { - compatible = "fsl,imx6sll-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; -}; - -uart1: serial@2020000 { - compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SLL_CLK_UART1_IPG>, - <&clks IMX6SLL_CLK_UART1_SERIAL>; - clock-names = "ipg", "per"; -}; diff --git a/dts/Bindings/clock/imx6sll-clock.yaml b/dts/Bindings/clock/imx6sll-clock.yaml new file mode 100644 index 0000000000..de48924be1 --- /dev/null +++ b/dts/Bindings/clock/imx6sll-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SLL + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sll-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/dts/Bindings/clock/imx6sx-clock.txt b/dts/Bindings/clock/imx6sx-clock.txt deleted file mode 100644 index 22362b9b7b..0000000000 --- a/dts/Bindings/clock/imx6sx-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX6 SoloX - -Required properties: -- compatible: Should be "fsl,imx6sx-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h -for the full list of i.MX6 SoloX clock IDs. diff --git a/dts/Bindings/clock/imx6sx-clock.yaml b/dts/Bindings/clock/imx6sx-clock.yaml new file mode 100644 index 0000000000..e50cddee43 --- /dev/null +++ b/dts/Bindings/clock/imx6sx-clock.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloX + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sx-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + - const: anaclk1 + - const: anaclk2 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; + }; diff --git a/dts/Bindings/clock/imx6ul-clock.txt b/dts/Bindings/clock/imx6ul-clock.txt deleted file mode 100644 index 571d5039f6..0000000000 --- a/dts/Bindings/clock/imx6ul-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX6 UltraLite - -Required properties: -- compatible: Should be "fsl,imx6ul-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h -for the full list of i.MX6 UltraLite clock IDs. diff --git a/dts/Bindings/clock/imx6ul-clock.yaml b/dts/Bindings/clock/imx6ul-clock.yaml new file mode 100644 index 0000000000..36ce7667c9 --- /dev/null +++ b/dts/Bindings/clock/imx6ul-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 UltraLite + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6ul-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/dts/Bindings/clock/imx7d-clock.txt b/dts/Bindings/clock/imx7d-clock.txt deleted file mode 100644 index 9d3026d81a..0000000000 --- a/dts/Bindings/clock/imx7d-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX7 Dual - -Required properties: -- compatible: Should be "fsl,imx7d-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h -for the full list of i.MX7 Dual clock IDs. diff --git a/dts/Bindings/clock/imx7d-clock.yaml b/dts/Bindings/clock/imx7d-clock.yaml new file mode 100644 index 0000000000..cefb61db01 --- /dev/null +++ b/dts/Bindings/clock/imx7d-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX7 Dual + +maintainers: + - Frank Li <Frank.Li@nxp.com> + - Anson Huang <Anson.Huang@nxp.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h + for the full list of i.MX7 Dual clock IDs. + +properties: + compatible: + const: fsl,imx7d-ccm + + reg: + maxItems: 1 + + interrupts: + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + + clock-names: + items: + - const: ckil + - const: osc + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; diff --git a/dts/Bindings/clock/imx8qxp-lpcg.txt b/dts/Bindings/clock/imx8qxp-lpcg.txt deleted file mode 100644 index 965cfa42e0..0000000000 --- a/dts/Bindings/clock/imx8qxp-lpcg.txt +++ /dev/null @@ -1,51 +0,0 @@ -* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings - -The Low-Power Clock Gate (LPCG) modules contain a local programming -model to control the clock gates for the peripherals. An LPCG module -is used to locally gate the clocks for the associated peripheral. - -Note: -This level of clock gating is provided after the clocks are generated -by the SCU resources and clock controls. Thus even if the clock is -enabled by these control bits, it might still not be running based -on the base resource. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qxp-lpcg-adma", - "fsl,imx8qxp-lpcg-conn", - "fsl,imx8qxp-lpcg-dc", - "fsl,imx8qxp-lpcg-dsp", - "fsl,imx8qxp-lpcg-gpu", - "fsl,imx8qxp-lpcg-hsio", - "fsl,imx8qxp-lpcg-img", - "fsl,imx8qxp-lpcg-lsio", - "fsl,imx8qxp-lpcg-vpu" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. -See the full list of clock IDs from: -include/dt-bindings/clock/imx8qxp-clock.h - -Examples: - -#include <dt-bindings/clock/imx8qxp-clock.h> - -conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; -}; - -usdhc1: mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; - clock-names = "ipg", "per", "ahb"; -}; diff --git a/dts/Bindings/clock/imx8qxp-lpcg.yaml b/dts/Bindings/clock/imx8qxp-lpcg.yaml new file mode 100644 index 0000000000..33f3010f48 --- /dev/null +++ b/dts/Bindings/clock/imx8qxp-lpcg.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings + +maintainers: + - Aisheng Dong <aisheng.dong@nxp.com> + +description: | + The Low-Power Clock Gate (LPCG) modules contain a local programming + model to control the clock gates for the peripherals. An LPCG module + is used to locally gate the clocks for the associated peripheral. + + This level of clock gating is provided after the clocks are generated + by the SCU resources and clock controls. Thus even if the clock is + enabled by these control bits, it might still not be running based + on the base resource. + + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See the full list of clock IDs from: + include/dt-bindings/clock/imx8-clock.h + +properties: + compatible: + enum: + - fsl,imx8qxp-lpcg-adma + - fsl,imx8qxp-lpcg-conn + - fsl,imx8qxp-lpcg-dc + - fsl,imx8qxp-lpcg-dsp + - fsl,imx8qxp-lpcg-gpu + - fsl,imx8qxp-lpcg-hsio + - fsl,imx8qxp-lpcg-img + - fsl,imx8qxp-lpcg-lsio + - fsl,imx8qxp-lpcg-vpu + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-clock.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; + }; + + mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; diff --git a/dts/Bindings/clock/ingenic,cgu.txt b/dts/Bindings/clock/ingenic,cgu.txt deleted file mode 100644 index 75598e6550..0000000000 --- a/dts/Bindings/clock/ingenic,cgu.txt +++ /dev/null @@ -1,57 +0,0 @@ -Ingenic SoC CGU binding - -The CGU in an Ingenic SoC provides all the clocks generated on-chip. It -typically includes a variety of PLLs, multiplexers, dividers & gates in order -to provide many different clock signals derived from only 2 external source -clocks. - -Required properties: -- compatible : Should be one of: - * ingenic,jz4740-cgu - * ingenic,jz4725b-cgu - * ingenic,jz4770-cgu - * ingenic,jz4780-cgu - * ingenic,x1000-cgu -- reg : The address & length of the CGU registers. -- clocks : List of phandle & clock specifiers for clocks external to the CGU. - Two such external clocks should be specified - first the external crystal - "ext" and second the RTC clock source "rtc". -- clock-names : List of name strings for the external clocks. -- #clock-cells: Should be 1. - Clock consumers specify this argument to identify a clock. The valid values - may be found in <dt-bindings/clock/<soctype>-cgu.h>. - -Example SoC include file: - -/ { - cgu: jz4740-cgu { - compatible = "ingenic,jz4740-cgu"; - reg = <0x10000000 0x100>; - #clock-cells = <1>; - }; - - uart0: serial@10030000 { - clocks = <&cgu JZ4740_CLK_UART0>; - }; -}; - -Example board file: - -/ { - ext: clock@0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - rtc: clock@1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - - &cgu { - clocks = <&ext> <&rtc>; - clock-names: "ext", "rtc"; - }; -}; diff --git a/dts/Bindings/clock/ingenic,cgu.yaml b/dts/Bindings/clock/ingenic,cgu.yaml new file mode 100644 index 0000000000..a952d58118 --- /dev/null +++ b/dts/Bindings/clock/ingenic,cgu.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs CGU devicetree bindings + +description: | + The CGU in an Ingenic SoC provides all the clocks generated on-chip. It + typically includes a variety of PLLs, multiplexers, dividers & gates in order + to provide many different clock signals derived from only 2 external source + clocks. + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +select: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + required: + - compatible + +properties: + $nodename: + pattern: "^clock-controller@[0-9a-f]+$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#clock-cells": + const: 1 + + ranges: true + + compatible: + items: + - enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + - const: simple-mfd + minItems: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: External oscillator clock + - description: Internal 32 kHz RTC clock + + clock-names: + items: + - const: ext + - enum: + - rtc + - osc32k # Different name, same clock + + assigned-clocks: + minItems: 1 + maxItems: 64 + + assigned-clock-parents: + minItems: 1 + maxItems: 64 + + assigned-clock-rates: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + +patternProperties: + "^usb-phy@[a-f0-9]+$": + allOf: [ $ref: "../usb/ingenic,jz4770-phy.yaml#" ] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4770-cgu.h> + cgu: clock-controller@10000000 { + compatible = "ingenic,jz4770-cgu", "simple-mfd"; + reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; + + clocks = <&ext>, <&osc32k>; + clock-names = "ext", "osc32k"; + + #clock-cells = <1>; + + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + vcc-supply = <&ldo5>; + + #phy-cells = <0>; + }; + }; diff --git a/dts/Bindings/clock/intel,agilex.yaml b/dts/Bindings/clock/intel,agilex.yaml new file mode 100644 index 0000000000..cf5a9eb803 --- /dev/null +++ b/dts/Bindings/clock/intel,agilex.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,agilex.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA Agilex platform clock controller binding + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: + The Intel Agilex Clock controller is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: intel,agilex-clkmgr + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock controller node: + - | + clkmgr: clock-controller@ffd10000 { + compatible = "intel,agilex-clkmgr"; + reg = <0xffd10000 0x1000>; + clocks = <&osc1>; + #clock-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/intel,cgu-lgm.yaml b/dts/Bindings/clock/intel,cgu-lgm.yaml new file mode 100644 index 0000000000..6dc1414bfb --- /dev/null +++ b/dts/Bindings/clock/intel,cgu-lgm.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Lightning Mountain SoC's Clock Controller(CGU) Binding + +maintainers: + - Rahul Tanwar <rahul.tanwar@linux.intel.com> + +description: | + Lightning Mountain(LGM) SoC's Clock Generation Unit(CGU) driver provides + all means to access the CGU hardware module in order to generate a series + of clocks for the whole system and individual peripherals. + + Please refer to include/dt-bindings/clock/intel,lgm-clk.h header file, it + defines all available clocks as macros. These macros can be used in device + tree sources. + +properties: + compatible: + const: intel,cgu-lgm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +examples: + - | + cgu: clock-controller@e0200000 { + compatible = "intel,cgu-lgm"; + reg = <0xe0200000 0x33c>; + #clock-cells = <1>; + }; + +... diff --git a/dts/Bindings/clock/marvell,mmp2-audio-clock.yaml b/dts/Bindings/clock/marvell,mmp2-audio-clock.yaml new file mode 100644 index 0000000000..dffa73402d --- /dev/null +++ b/dts/Bindings/clock/marvell,mmp2-audio-clock.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mmp2-audio-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 Audio Clock Controller + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +description: | + The audio clock controller generates and supplies the clocks to the audio + codec. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in + <dt-bindings/clock/marvell,mmp2-audio.h>. + +properties: + compatible: + enum: + - marvell,mmp2-audio-clock + + reg: + maxItems: 1 + + clocks: + items: + - description: Audio subsystem clock + - description: The crystal oscillator clock + - description: First I2S clock + - description: Second I2S clock + + clock-names: + items: + - const: audio + - const: vctcxo + - const: i2s0 + - const: i2s1 + + '#clock-cells': + const: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/marvell,mmp2-audio.h> + #include <dt-bindings/clock/marvell,mmp2.h> + #include <dt-bindings/power/marvell,mmp2.h> + + clock-controller@d42a0c30 { + compatible = "marvell,mmp2-audio-clock"; + reg = <0xd42a0c30 0x10>; + clock-names = "audio", "vctcxo", "i2s0", "i2s1"; + clocks = <&soc_clocks MMP2_CLK_AUDIO>, + <&soc_clocks MMP2_CLK_VCTCXO>, + <&soc_clocks MMP2_CLK_I2S0>, + <&soc_clocks MMP2_CLK_I2S1>; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/marvell,mmp2-clock.yaml b/dts/Bindings/clock/marvell,mmp2-clock.yaml index e2b6ac96bb..d68f0d196e 100644 --- a/dts/Bindings/clock/marvell,mmp2-clock.yaml +++ b/dts/Bindings/clock/marvell,mmp2-clock.yaml @@ -42,12 +42,16 @@ properties: '#reset-cells': const: 1 + '#power-domain-cells': + const: 1 + required: - compatible - reg - reg-names - '#clock-cells' - '#reset-cells' + - '#power-domain-cells' additionalProperties: false @@ -61,4 +65,5 @@ examples: reg-names = "mpmu", "apmu", "apbc"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; diff --git a/dts/Bindings/clock/qcom,a53pll.txt b/dts/Bindings/clock/qcom,a53pll.txt deleted file mode 100644 index e3fa8118ea..0000000000 --- a/dts/Bindings/clock/qcom,a53pll.txt +++ /dev/null @@ -1,22 +0,0 @@ -Qualcomm MSM8916 A53 PLL Binding --------------------------------- -The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies -above 1GHz. - -Required properties : -- compatible : Shall contain only one of the following: - - "qcom,msm8916-a53pll" - -- reg : shall contain base register location and length - -- #clock-cells : must be set to <0> - -Example: - - a53pll: clock@b016000 { - compatible = "qcom,msm8916-a53pll"; - reg = <0xb016000 0x40>; - #clock-cells = <0>; - }; - diff --git a/dts/Bindings/clock/qcom,a53pll.yaml b/dts/Bindings/clock/qcom,a53pll.yaml new file mode 100644 index 0000000000..20d2638b4c --- /dev/null +++ b/dts/Bindings/clock/qcom,a53pll.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm A53 PLL Binding + +maintainers: + - Sivaprakash Murugesan <sivaprak@codeaurora.org> + +description: + The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for + frequencies above 1GHz. + +properties: + compatible: + const: qcom,msm8916-a53pll + + reg: + maxItems: 1 + + '#clock-cells': + const: 0 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + #Example 1 - A53 PLL found on MSM8916 devices + - | + a53pll: clock@b016000 { + compatible = "qcom,msm8916-a53pll"; + reg = <0xb016000 0x40>; + #clock-cells = <0>; + }; diff --git a/dts/Bindings/clock/qcom,gcc-sc7180.yaml b/dts/Bindings/clock/qcom,gcc-sc7180.yaml index a345320e0e..a404c8fbee 100644 --- a/dts/Bindings/clock/qcom,gcc-sc7180.yaml +++ b/dts/Bindings/clock/qcom,gcc-sc7180.yaml @@ -65,7 +65,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@100000 { compatible = "qcom,gcc-sc7180"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; diff --git a/dts/Bindings/clock/qcom,gcc-sm8150.yaml b/dts/Bindings/clock/qcom,gcc-sm8150.yaml index 36f3b3668c..12766a8666 100644 --- a/dts/Bindings/clock/qcom,gcc-sm8150.yaml +++ b/dts/Bindings/clock/qcom,gcc-sm8150.yaml @@ -63,7 +63,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@100000 { compatible = "qcom,gcc-sm8150"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; diff --git a/dts/Bindings/clock/qcom,gcc-sm8250.yaml b/dts/Bindings/clock/qcom,gcc-sm8250.yaml index 2c40a8aa98..a5766ff890 100644 --- a/dts/Bindings/clock/qcom,gcc-sm8250.yaml +++ b/dts/Bindings/clock/qcom,gcc-sm8250.yaml @@ -61,7 +61,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@100000 { compatible = "qcom,gcc-sm8250"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; diff --git a/dts/Bindings/clock/qcom,gcc.yaml b/dts/Bindings/clock/qcom,gcc.yaml index e533bb0cfd..ee0467fb5e 100644 --- a/dts/Bindings/clock/qcom,gcc.yaml +++ b/dts/Bindings/clock/qcom,gcc.yaml @@ -22,6 +22,8 @@ description: | - dt-bindings/reset/qcom,gcc-ipq6018.h - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) + - dt-bindings/clock/qcom,gcc-msm8939.h + - dt-bindings/reset/qcom,gcc-msm8939.h - dt-bindings/clock/qcom,gcc-msm8660.h - dt-bindings/reset/qcom,gcc-msm8660.h - dt-bindings/clock/qcom,gcc-msm8974.h @@ -41,6 +43,7 @@ properties: - qcom,gcc-ipq8064 - qcom,gcc-msm8660 - qcom,gcc-msm8916 + - qcom,gcc-msm8939 - qcom,gcc-msm8960 - qcom,gcc-msm8974 - qcom,gcc-msm8974pro diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml index f684fe67db..1b16a863b3 100644 --- a/dts/Bindings/clock/qcom,mmcc.yaml +++ b/dts/Bindings/clock/qcom,mmcc.yaml @@ -15,15 +15,15 @@ description: | power domains. properties: - compatible : + compatible: enum: - - qcom,mmcc-apq8064 - - qcom,mmcc-apq8084 - - qcom,mmcc-msm8660 - - qcom,mmcc-msm8960 - - qcom,mmcc-msm8974 - - qcom,mmcc-msm8996 - - qcom,mmcc-msm8998 + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 clocks: items: @@ -67,6 +67,10 @@ properties: description: Protected clock specifier list as per common clock binding + vdd-gfx-supply: + description: + Regulator supply for the GPU_GX GDSC + required: - compatible - reg diff --git a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml index 58cdfd5924..e94847f927 100644 --- a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml @@ -66,7 +66,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@af00000 { compatible = "qcom,sc7180-dispcc"; - reg = <0 0x0af00000 0 0x200000>; + reg = <0x0af00000 0x200000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&dsi_phy 0>, diff --git a/dts/Bindings/clock/qcom,sc7180-gpucc.yaml b/dts/Bindings/clock/qcom,sc7180-gpucc.yaml index 8635e35fd3..fe08461fce 100644 --- a/dts/Bindings/clock/qcom,sc7180-gpucc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-gpucc.yaml @@ -60,7 +60,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@5090000 { compatible = "qcom,sc7180-gpucc"; - reg = <0 0x05090000 0 0x9000>; + reg = <0x05090000 0x9000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; diff --git a/dts/Bindings/clock/qcom,sc7180-mss.yaml b/dts/Bindings/clock/qcom,sc7180-mss.yaml index 0dd5d25ae7..970030986a 100644 --- a/dts/Bindings/clock/qcom,sc7180-mss.yaml +++ b/dts/Bindings/clock/qcom,sc7180-mss.yaml @@ -50,7 +50,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sc7180.h> clock-controller@41a8000 { compatible = "qcom,sc7180-mss"; - reg = <0 0x041a8000 0 0x8000>; + reg = <0x041a8000 0x8000>; clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, <&gcc GCC_MSS_NAV_AXI_CLK>, <&gcc GCC_MSS_CFG_AHB_CLK>; diff --git a/dts/Bindings/clock/qcom,sc7180-videocc.yaml b/dts/Bindings/clock/qcom,sc7180-videocc.yaml index 0071b97019..2feea2b91a 100644 --- a/dts/Bindings/clock/qcom,sc7180-videocc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-videocc.yaml @@ -55,7 +55,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@ab00000 { compatible = "qcom,sc7180-videocc"; - reg = <0 0x0ab00000 0 0x10000>; + reg = <0x0ab00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; diff --git a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml index ad47d747a3..4a3be733d0 100644 --- a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml @@ -75,7 +75,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; - reg = <0 0x0af00000 0 0x10000>; + reg = <0x0af00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, diff --git a/dts/Bindings/clock/qcom,sdm845-gpucc.yaml b/dts/Bindings/clock/qcom,sdm845-gpucc.yaml index 7a052ac5dc..8a0c576ba8 100644 --- a/dts/Bindings/clock/qcom,sdm845-gpucc.yaml +++ b/dts/Bindings/clock/qcom,sdm845-gpucc.yaml @@ -60,7 +60,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@5090000 { compatible = "qcom,sdm845-gpucc"; - reg = <0 0x05090000 0 0x9000>; + reg = <0x05090000 0x9000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; diff --git a/dts/Bindings/clock/qcom,sdm845-videocc.yaml b/dts/Bindings/clock/qcom,sdm845-videocc.yaml index 2a6a81ab03..f7a0cf53d5 100644 --- a/dts/Bindings/clock/qcom,sdm845-videocc.yaml +++ b/dts/Bindings/clock/qcom,sdm845-videocc.yaml @@ -55,7 +55,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; - reg = <0 0x0ab00000 0 0x10000>; + reg = <0x0ab00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; diff --git a/dts/Bindings/clock/renesas,cpg-div6-clock.yaml b/dts/Bindings/clock/renesas,cpg-div6-clock.yaml new file mode 100644 index 0000000000..c55a7c494e --- /dev/null +++ b/dts/Bindings/clock/renesas,cpg-div6-clock.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,cpg-div6-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas CPG DIV6 Clock + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse + Generator (CPG). Their clock input is divided by a configurable factor from 1 + to 64. + +properties: + compatible: + items: + - enum: + - renesas,r8a73a4-div6-clock # R-Mobile APE6 + - renesas,r8a7740-div6-clock # R-Mobile A1 + - renesas,sh73a0-div6-clock # SH-Mobile AG5 + - const: renesas,cpg-div6-clock + + reg: + maxItems: 1 + + clocks: + oneOf: + - maxItems: 1 + - maxItems: 4 + - maxItems: 8 + description: + For clocks with multiple parents, invalid settings must be specified as + "<0>". + + '#clock-cells': + const: 0 + + clock-output-names: true + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a73a4-clock.h> + sdhi2_clk: sdhi2_clk@e615007c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615007c 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, + <&extal2_clk>; + #clock-cells = <0>; + }; diff --git a/dts/Bindings/clock/renesas,cpg-div6-clocks.txt b/dts/Bindings/clock/renesas,cpg-div6-clocks.txt deleted file mode 100644 index ae36ab8429..0000000000 --- a/dts/Bindings/clock/renesas,cpg-div6-clocks.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Renesas CPG DIV6 Clock - -The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse -Generator (CPG). Their clock input is divided by a configurable factor from 1 -to 64. - -Required Properties: - - - compatible: Must be one of the following - - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks - - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks - - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks - - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2-W) DIV6 clocks - - "renesas,r8a7793-div6-clock" for R8A7793 (R-Car M2-N) DIV6 clocks - - "renesas,r8a7794-div6-clock" for R8A7794 (R-Car E2) DIV6 clocks - - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks - and "renesas,cpg-div6-clock" as a fallback. - - reg: Base address and length of the memory resource used by the DIV6 clock - - clocks: Reference to the parent clock(s); either one, four, or eight - clocks must be specified. For clocks with multiple parents, invalid - settings must be specified as "<0>". - - #clock-cells: Must be 0 - - -Optional Properties: - - - clock-output-names: The name of the clock as a free-form string - - -Example -------- - - sdhi2_clk: sdhi2_clk@e615007c { - compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615007c 0 4>; - clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, - <0>, <&extal2_clk>; - #clock-cells = <0>; - clock-output-names = "sdhi2ck"; - }; diff --git a/dts/Bindings/clock/renesas,cpg-mssr.yaml b/dts/Bindings/clock/renesas,cpg-mssr.yaml index 9cd102e5fe..c745bd6071 100644 --- a/dts/Bindings/clock/renesas,cpg-mssr.yaml +++ b/dts/Bindings/clock/renesas,cpg-mssr.yaml @@ -25,6 +25,7 @@ properties: compatible: enum: - renesas,r7s9210-cpg-mssr # RZ/A2 + - renesas,r8a7742-cpg-mssr # RZ/G1H - renesas,r8a7743-cpg-mssr # RZ/G1M - renesas,r8a7744-cpg-mssr # RZ/G1N - renesas,r8a7745-cpg-mssr # RZ/G1E diff --git a/dts/Bindings/clock/renesas,cpg-mstp-clocks.txt b/dts/Bindings/clock/renesas,cpg-mstp-clocks.txt deleted file mode 100644 index da578ebdda..0000000000 --- a/dts/Bindings/clock/renesas,cpg-mstp-clocks.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Renesas CPG Module Stop (MSTP) Clocks - -The CPG can gate SoC device clocks. The gates are organized in groups of up to -32 gates. - -This device tree binding describes a single 32 gate clocks group per node. -Clocks are referenced by user nodes by the MSTP node phandle and the clock -index in the group, from 0 to 31. - -Required Properties: - - - compatible: Must be one of the following - - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks - - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks - - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks - - "renesas,r8a7778-mstp-clocks" for R8A7778 (R-Car M1) MSTP gate clocks - - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks - - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks - - "renesas,r8a7792-mstp-clocks" for R8A7792 (R-Car V2H) MSTP gate clocks - - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks - - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks - - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks - and "renesas,cpg-mstp-clocks" as a fallback. - - reg: Base address and length of the I/O mapped registers used by the MSTP - clocks. The first register is the clock control register and is mandatory. - The second register is the clock status register and is optional when not - implemented in hardware. - - clocks: Reference to the parent clocks, one per output clock. The parents - must appear in the same order as the output clocks. - - #clock-cells: Must be 1 - - clock-output-names: The name of the clocks as free-form strings - - clock-indices: Indices of the gate clocks into the group (0 to 31) - -The clocks, clock-output-names and clock-indices properties contain one entry -per gate clock. The MSTP groups are sparsely populated. Unimplemented gate -clocks must not be declared. - - -Example -------- - - #include <dt-bindings/clock/r8a7790-clock.h> - - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, - <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, - <&mmc0_clk>; - #clock-cells = <1>; - clock-output-names = - "tpu0", "mmcif1", "sdhi3", "sdhi2", - "sdhi1", "sdhi0", "mmcif0"; - clock-indices = < - R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 - R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 - R8A7790_CLK_MMCIF0 - >; - }; diff --git a/dts/Bindings/clock/renesas,cpg-mstp-clocks.yaml b/dts/Bindings/clock/renesas,cpg-mstp-clocks.yaml new file mode 100644 index 0000000000..9752ac6328 --- /dev/null +++ b/dts/Bindings/clock/renesas,cpg-mstp-clocks.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,cpg-mstp-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Clock Pulse Generator (CPG) can gate SoC device clocks. The gates are + organized in groups of up to 32 gates. + + This device tree binding describes a single 32 gate clocks group per node. + Clocks are referenced by user nodes by the Module Stop (MSTP) node phandle + and the clock index in the group, from 0 to 31. + +properties: + compatible: + items: + - enum: + - renesas,r7s72100-mstp-clocks # RZ/A1 + - renesas,r8a73a4-mstp-clocks # R-Mobile APE6 + - renesas,r8a7740-mstp-clocks # R-Mobile A1 + - renesas,r8a7778-mstp-clocks # R-Car M1 + - renesas,r8a7779-mstp-clocks # R-Car H1 + - renesas,sh73a0-mstp-clocks # SH-Mobile AG5 + - const: renesas,cpg-mstp-clocks + + reg: + minItems: 1 + items: + - description: Module Stop Control Register (MSTPCR) + - description: Module Stop Status Register (MSTPSR) + + clocks: + minItems: 1 + maxItems: 32 + + '#clock-cells': + const: 1 + + clock-indices: + minItems: 1 + maxItems: 32 + + clock-output-names: + minItems: 1 + maxItems: 32 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - clock-indices + - clock-output-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a73a4-clock.h> + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a73a4-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xe6150138 4>, <0xe6150040 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1 + R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1 + R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3 + R8A73A4_CLK_DMAC + >; + clock-output-names = + "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifb3", + "dmac"; + }; diff --git a/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt b/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt index 4bf6f53bd9..da92f5748d 100644 --- a/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt +++ b/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt @@ -27,7 +27,9 @@ Required properties: - compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of an R8A7795 SoC. "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of - an R8A7796 SoC. + an R8A77960 SoC. + "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of + an R8A77961 SoC. "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3 compatible device. diff --git a/dts/Bindings/clock/silabs,si5341.txt b/dts/Bindings/clock/silabs,si5341.txt index a70c333e4c..504cce3abe 100644 --- a/dts/Bindings/clock/silabs,si5341.txt +++ b/dts/Bindings/clock/silabs,si5341.txt @@ -1,15 +1,21 @@ -Binding for Silicon Labs Si5341 and Si5340 programmable i2c clock generator. +Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable +i2c clock generator. Reference [1] Si5341 Data Sheet https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf [2] Si5341 Reference Manual https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf +[3] Si5345 Reference Manual + https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which in turn can be directed to any of the 10 (or 4) outputs through a divider. The internal structure of the clock generators can be found in [2]. +The Si5345 is similar to the Si5341 with the addition of fractional input +dividers and automatic input selection, as described in [3]. +The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs. The driver can be used in "as is" mode, reading the current settings from the chip at boot, in case you have a (pre-)programmed device. If the PLL is not @@ -28,6 +34,9 @@ Required properties: - compatible: shall be one of the following: "silabs,si5340" - Si5340 A/B/C/D "silabs,si5341" - Si5341 A/B/C/D + "silabs,si5342" - Si5342 A/B/C/D + "silabs,si5344" - Si5344 A/B/C/D + "silabs,si5345" - Si5345 A/B/C/D - reg: i2c device address, usually 0x74 - #clock-cells: from common clock binding; shall be set to 2. The first value is "0" for outputs, "1" for synthesizers. diff --git a/dts/Bindings/clock/sprd,sc9863a-clk.yaml b/dts/Bindings/clock/sprd,sc9863a-clk.yaml index bb3a78d810..29813873cf 100644 --- a/dts/Bindings/clock/sprd,sc9863a-clk.yaml +++ b/dts/Bindings/clock/sprd,sc9863a-clk.yaml @@ -28,6 +28,7 @@ properties: - sprd,sc9863a-rpll - sprd,sc9863a-dpll - sprd,sc9863a-mm-gate + - sprd,sc9863a-mm-clk - sprd,sc9863a-apapb-gate clocks: @@ -76,29 +77,24 @@ examples: - | ap_clk: clock-controller@21500000 { compatible = "sprd,sc9863a-ap-clk"; - reg = <0 0x21500000 0 0x1000>; + reg = <0x21500000 0x1000>; clocks = <&ext_26m>, <&ext_32k>; clock-names = "ext-26m", "ext-32k"; #clock-cells = <1>; }; - | - soc { - #address-cells = <2>; - #size-cells = <2>; - - ap_ahb_regs: syscon@20e00000 { - compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; - reg = <0 0x20e00000 0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x20e00000 0x4000>; - - apahb_gate: apahb-gate@0 { - compatible = "sprd,sc9863a-apahb-gate"; - reg = <0x0 0x1020>; - #clock-cells = <1>; - }; + syscon@20e00000 { + compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; + reg = <0x20e00000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x20e00000 0x4000>; + + apahb_gate: apahb-gate@0 { + compatible = "sprd,sc9863a-apahb-gate"; + reg = <0x0 0x1020>; + #clock-cells = <1>; }; }; |