dts: update to v5.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 16 insertions, 0 deletions

diff --git a/dts/Bindings/display/mediatek/mediatek,dpi.txt b/dts/Bindings/display/mediatek/mediatek,dpi.txt
index 58914cf681..77def44567 100644
--- a/dts/Bindings/display/mediatek/mediatek,dpi.txt
+++ b/dts/Bindings/display/mediatek/mediatek,dpi.txt
@@ -17,6 +17,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -27,6 +30,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
diff --git a/dts/Bindings/display/mediatek/mediatek,dsi.txt b/dts/Bindings/display/mediatek/mediatek,dsi.txt
index a19a6cc375..8e4729de8c 100644
--- a/dts/Bindings/display/mediatek/mediatek,dsi.txt
+++ b/dts/Bindings/display/mediatek/mediatek,dsi.txt
@@ -33,6 +33,13 @@ Required properties:
 - #clock-cells: must be <0>;
 - #phy-cells: must be <0>.
 
+Optional properties:
+- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
+						   the step is 200.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+               unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
+
 Example:
 
 mipi_tx0: mipi-dphy@10215000 {
@@ -42,6 +49,9 @@ mipi_tx0: mipi-dphy@10215000 {
 	clock-output-names = "mipi_tx0_pll";
 	#clock-cells = <0>;
 	#phy-cells = <0>;
+	drive-strength-microamp = <4600>;
+	nvmem-cells= <&mipi_tx_calibration>;
+	nvmem-cell-names = "calibration-data";
 };
 
 dsi0: dsi@1401b000 {