dts: update to v6.4-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 98 deletions

diff --git a/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt b/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt
deleted file mode 100644
index 43561584c1..0000000000
--- a/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Rockchip RK3288 specific extensions to the Analogix Display Port
-================================
-
-Required properties:
-- compatible: "rockchip,rk3288-dp",
-	      "rockchip,rk3399-edp";
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
-	  of memory mapped region.
-
-- clock-names: from common clock binding:
-	       Required elements: "dp" "pclk"
-
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-
-- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
-- pinctrl-0: pin-control mode. should be <&edp_hpd>
-
-- reset-names: Must include the name "dp"
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: there are 2 port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-    Port 0: contained 2 endpoints, connecting to the output of vop.
-    Port 1: contained 1 endpoint, connecting to the input of panel.
-
-Optional property for different chips:
-- clocks: from common clock binding: handle to grf_vio clock.
-
-- clock-names: from common clock binding:
-	       Required elements: "grf"
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
-- phys (required)
-- phy-names (required)
-- hpd-gpios (optional)
-- force-hpd (optional)
--------------------------------------------------------------------------------
-
-Example:
-	dp-controller: dp@ff970000 {
-		compatible = "rockchip,rk3288-dp";
-		reg = <0xff970000 0x4000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
-		clock-names = "dp", "pclk";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-
-		rockchip,grf = <&grf>;
-		resets = <&cru 111>;
-		reset-names = "dp";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_hpd>;
-
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			edp_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_edp>;
-				};
-				edp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_edp>;
-				};
-			};
-
-			edp_out: port@1 {
-				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_out_panel: endpoint {
-					reg = <0>;
-					remote-endpoint = <&panel_in_edp>
-				};
-			};
-		};
-	};
-
-	pinctrl {
-		edp {
-			edp_hpd: edp-hpd {
-				rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-	};