diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-08 07:35:17 +0100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-10 08:48:40 +0100 |
commit | 6e6d9a2ff045f09d5a03e876becea5e6a1dabe90 (patch) | |
tree | bcf5e71df4472e374d03cc15ca22b4f841d9c73d /dts/Bindings/display/ssd1307fb.txt | |
parent | 8e2fd5380a4fd7cee428513dc8eab068912b49f1 (diff) | |
download | barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.gz barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.xz |
dts: update to v4.4-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/display/ssd1307fb.txt')
-rw-r--r-- | dts/Bindings/display/ssd1307fb.txt | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/dts/Bindings/display/ssd1307fb.txt b/dts/Bindings/display/ssd1307fb.txt new file mode 100644 index 0000000000..eb31ed47a2 --- /dev/null +++ b/dts/Bindings/display/ssd1307fb.txt @@ -0,0 +1,50 @@ +* Solomon SSD1307 Framebuffer Driver + +Required properties: + - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for + now is i2c, and the supported chips are ssd1305, ssd1306, ssd1307 and + ssd1309. + - reg: Should contain address of the controller on the I2C bus. Most likely + 0x3c or 0x3d + - pwm: Should contain the pwm to use according to the OF device tree PWM + specification [0]. Only required for the ssd1307. + - reset-gpios: Should contain the GPIO used to reset the OLED display + - solomon,height: Height in pixel of the screen driven by the controller + - solomon,width: Width in pixel of the screen driven by the controller + - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is + mapped to. + +Optional properties: + - reset-active-low: Is the reset gpio is active on physical low? + - solomon,segment-no-remap: Display needs normal (non-inverted) data column + to segment mapping + - solomon,com-seq: Display uses sequential COM pin configuration + - solomon,com-lrremap: Display uses left-right COM pin remap + - solomon,com-invdir: Display uses inverted COM pin scan direction + - solomon,com-offset: Number of the COM pin wired to the first display line + - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. + - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. + This needs to be the higher, the higher the capacitance + of the OLED's pixels is + +[0]: Documentation/devicetree/bindings/pwm/pwm.txt + +Examples: +ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + reset-active-low; +}; + +ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + reset-active-low; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; +}; |