diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2021-11-17 07:36:09 +0100 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2021-11-17 07:36:09 +0100 |
| commit | 3f2f5980d517b6a71ffe54e615bd3a4b58b1c295 (patch) | |
| tree | eb5a7bfce811d20e58dd0eb1add0f6cf0e6b86e0 /dts/Bindings/display | |
| parent | 81ceab95360295cef146e89a1cd1cd5e590aa75e (diff) | |
| download | barebox-3f2f5980d517b6a71ffe54e615bd3a4b58b1c295.tar.gz barebox-3f2f5980d517b6a71ffe54e615bd3a4b58b1c295.tar.xz | |
dts: update to v5.16-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/display')
30 files changed, 1480 insertions, 230 deletions
diff --git a/dts/Bindings/display/brcm,bcm2835-dsi0.yaml b/dts/Bindings/display/brcm,bcm2835-dsi0.yaml index 32608578a3..c8b2459d64 100644 --- a/dts/Bindings/display/brcm,bcm2835-dsi0.yaml +++ b/dts/Bindings/display/brcm,bcm2835-dsi0.yaml @@ -47,6 +47,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - "#clock-cells" - compatible diff --git a/dts/Bindings/display/brcm,bcm2835-hdmi.yaml b/dts/Bindings/display/brcm,bcm2835-hdmi.yaml index 031e35e76d..48c8cad0d9 100644 --- a/dts/Bindings/display/brcm,bcm2835-hdmi.yaml +++ b/dts/Bindings/display/brcm,bcm2835-hdmi.yaml @@ -51,6 +51,9 @@ properties: dma-names: const: audio-rx + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/display/brcm,bcm2835-v3d.yaml b/dts/Bindings/display/brcm,bcm2835-v3d.yaml index 8a73780f57..c55a8217de 100644 --- a/dts/Bindings/display/brcm,bcm2835-v3d.yaml +++ b/dts/Bindings/display/brcm,bcm2835-v3d.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/display/brcm,bcm2835-vec.yaml b/dts/Bindings/display/brcm,bcm2835-vec.yaml index 9b24081a0d..5d921e3039 100644 --- a/dts/Bindings/display/brcm,bcm2835-vec.yaml +++ b/dts/Bindings/display/brcm,bcm2835-vec.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/display/bridge/lvds-codec.yaml b/dts/Bindings/display/bridge/lvds-codec.yaml index 304a1367fa..1faae3e323 100644 --- a/dts/Bindings/display/bridge/lvds-codec.yaml +++ b/dts/Bindings/display/bridge/lvds-codec.yaml @@ -49,11 +49,26 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: | For LVDS encoders, port 0 is the parallel input For LVDS decoders, port 0 is the LVDS input + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-mapping: + enum: + - jeida-18 + - jeida-24 + - vesa-24 + description: | + The color signals mapping order. See details in + Documentation/devicetree/bindings/display/panel/lvds.yaml + port@1: $ref: /schemas/graph.yaml#/properties/port description: | @@ -71,6 +86,22 @@ properties: power-supply: true +if: + not: + properties: + compatible: + contains: + const: lvds-decoder +then: + properties: + ports: + properties: + port@0: + properties: + endpoint: + properties: + data-mapping: false + required: - compatible - ports diff --git a/dts/Bindings/display/bridge/ps8640.yaml b/dts/Bindings/display/bridge/ps8640.yaml index fce82b605c..cdaf7a7a8f 100644 --- a/dts/Bindings/display/bridge/ps8640.yaml +++ b/dts/Bindings/display/bridge/ps8640.yaml @@ -40,6 +40,9 @@ properties: vdd33-supply: description: Regulator for 3.3V digital core power. + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -98,7 +101,21 @@ examples: reg = <1>; ps8640_out: endpoint { remote-endpoint = <&panel_in>; - }; + }; + }; + }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; }; }; }; diff --git a/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml b/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml index 3c3e51af15..11fd68a70d 100644 --- a/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Synopsys DesignWare MIPI DSI host controller maintainers: - - Philippe CORNU <philippe.cornu@st.com> + - Philippe CORNU <philippe.cornu@foss.st.com> description: | This document defines device tree properties for the Synopsys DesignWare MIPI diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.txt b/dts/Bindings/display/bridge/toshiba,tc358767.txt deleted file mode 100644 index 583c5e9dbe..0000000000 --- a/dts/Bindings/display/bridge/toshiba,tc358767.txt +++ /dev/null @@ -1,54 +0,0 @@ -Toshiba TC358767 eDP bridge bindings - -Required properties: - - compatible: "toshiba,tc358767" - - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins - - clock-names: should be "ref" - - clocks: OF device-tree clock specification for refclk input. The reference - clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. - -Optional properties: - - shutdown-gpios: OF device-tree gpio specification for SD pin - (active high shutdown input) - - reset-gpios: OF device-tree gpio specification for RSTX pin - (active low system reset) - - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1) - - ports: the ports node can contain video interface port nodes to connect - to a DPI/DSI source and to an eDP/DP sink according to [1][2]: - - port@0: DSI input port - - port@1: DPI input port - - port@2: eDP/DP output port - -[1]: Documentation/devicetree/bindings/graph.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - edp-bridge@68 { - compatible = "toshiba,tc358767"; - reg = <0x68>; - shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; - clock-names = "ref"; - clocks = <&edp_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - bridge_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@2 { - reg = <2>; - - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.yaml b/dts/Bindings/display/bridge/toshiba,tc358767.yaml new file mode 100644 index 0000000000..f1541cc052 --- /dev/null +++ b/dts/Bindings/display/bridge/toshiba,tc358767.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358767 eDP bridge bindings + +maintainers: + - Andrey Gusakov <andrey.gusakov@cogentembedded.com> + +description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP + +properties: + compatible: + const: toshiba,tc358767 + + reg: + enum: + - 0x68 + - 0x0f + description: | + i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins + + clock-names: + const: "ref" + + clocks: + maxItems: 1 + description: | + OF device-tree clock specification for refclk input. The reference. + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. + + shutdown-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for SD pin(active high shutdown input) + + reset-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for RSTX pin(active low system reset) + + toshiba,hpd-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + description: TC358767 GPIO pin number to which HPD is connected to (0 or 1) + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + DSI input port. The remote endpoint phandle should be a + reference to a valid DSI output endpoint node + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + DPI input port. The remote endpoint phandle should be a + reference to a valid DPI output endpoint node + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: | + eDP/DP output port. The remote endpoint phandle should be a + reference to a valid eDP panel input endpoint node. This port is + optional, treated as DP panel if not defined + + oneOf: + - required: + - port@0 + - required: + - port@1 + + +required: + - compatible + - reg + - clock-names + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* DPI input and eDP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_0: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@2 { + reg = <2>; + + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + - | + /* DPI input and DP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_1: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/ingenic,ipu.yaml b/dts/Bindings/display/ingenic,ipu.yaml index e679f48a38..3f93def2c5 100644 --- a/dts/Bindings/display/ingenic,ipu.yaml +++ b/dts/Bindings/display/ingenic,ipu.yaml @@ -45,7 +45,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/jz4770-cgu.h> + #include <dt-bindings/clock/ingenic,jz4770-cgu.h> ipu@13080000 { compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu"; reg = <0x13080000 0x800>; diff --git a/dts/Bindings/display/ingenic,lcd.yaml b/dts/Bindings/display/ingenic,lcd.yaml index 50d2b0a50e..0049010b37 100644 --- a/dts/Bindings/display/ingenic,lcd.yaml +++ b/dts/Bindings/display/ingenic,lcd.yaml @@ -88,7 +88,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/jz4740-cgu.h> + #include <dt-bindings/clock/ingenic,jz4740-cgu.h> lcd-controller@13050000 { compatible = "ingenic,jz4740-lcd"; reg = <0x13050000 0x1000>; @@ -107,7 +107,7 @@ examples: }; - | - #include <dt-bindings/clock/jz4725b-cgu.h> + #include <dt-bindings/clock/ingenic,jz4725b-cgu.h> lcd-controller@13050000 { compatible = "ingenic,jz4725b-lcd"; reg = <0x13050000 0x1000>; diff --git a/dts/Bindings/display/mediatek/mediatek,dsi.txt b/dts/Bindings/display/mediatek/mediatek,dsi.txt index d30428b9fb..36b01458f4 100644 --- a/dts/Bindings/display/mediatek/mediatek,dsi.txt +++ b/dts/Bindings/display/mediatek/mediatek,dsi.txt @@ -19,6 +19,11 @@ Required properties: Documentation/devicetree/bindings/graph.txt. This port should be connected to the input port of an attached DSI panel or DSI-to-eDP encoder chip. +Optional properties: +- resets: list of phandle + reset specifier pair, as described in [1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + MIPI TX Configuration Module ============================ @@ -45,6 +50,7 @@ dsi0: dsi@1401b000 { clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; diff --git a/dts/Bindings/display/msm/dp-controller.yaml b/dts/Bindings/display/msm/dp-controller.yaml index 64d8d9e5e4..63e585f487 100644 --- a/dts/Bindings/display/msm/dp-controller.yaml +++ b/dts/Bindings/display/msm/dp-controller.yaml @@ -17,9 +17,16 @@ properties: compatible: enum: - qcom,sc7180-dp + - qcom,sc8180x-dp + - qcom,sc8180x-edp reg: - maxItems: 1 + items: + - description: ahb register block + - description: aux register block + - description: link register block + - description: p0 register block + - description: p1 register block interrupts: maxItems: 1 @@ -95,12 +102,15 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,dispcc-sc7180.h> - #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> displayport-controller@ae90000 { compatible = "qcom,sc7180-dp"; - reg = <0xae90000 0x1400>; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, diff --git a/dts/Bindings/display/msm/dpu-sc7280.yaml b/dts/Bindings/display/msm/dpu-sc7280.yaml new file mode 100644 index 0000000000..fbeb931a02 --- /dev/null +++ b/dts/Bindings/display/msm/dpu-sc7280.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7280 + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SC7280. + +properties: + compatible: + const: qcom,sc7280-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + + interconnects: + items: + - description: Interconnect path specifying the port ids for data bus + + interconnect-names: + const: mdp0-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + const: qcom,sc7280-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF5 (EDP) + + required: + - port@0 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7280-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/dsi-phy-14nm.yaml b/dts/Bindings/display/msm/dsi-phy-14nm.yaml index 064df50e21..81dbee4803 100644 --- a/dts/Bindings/display/msm/dsi-phy-14nm.yaml +++ b/dts/Bindings/display/msm/dsi-phy-14nm.yaml @@ -17,6 +17,7 @@ properties: enum: - qcom,dsi-phy-14nm - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 reg: items: diff --git a/dts/Bindings/display/msm/gpu.txt b/dts/Bindings/display/msm/gpu.txt deleted file mode 100644 index 090dcb3fc3..0000000000 --- a/dts/Bindings/display/msm/gpu.txt +++ /dev/null @@ -1,157 +0,0 @@ -Qualcomm adreno/snapdragon GPU - -Required properties: -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or - "amd,imageon-XYZ.W", "amd,imageon" - for example: "qcom,adreno-306.0", "qcom,adreno" - Note that you need to list the less specific "qcom,adreno" (since this - is what the device is matched on), in addition to the more specific - with the chip-id. - If "amd,imageon" is used, there should be no top level msm device. -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the gpu. -- clocks: device clocks (if applicable) - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required by a3xx, a4xx and a5xx - cores: - * "core" - * "iface" - * "mem_iface" - For GMU attached devices the GPU clocks are not used and are not required. The - following devices should not list clocks: - - qcom,adreno-630.2 -- iommus: optional phandle to an adreno iommu instance -- operating-points-v2: optional phandle to the OPP operating points -- interconnects: optional phandle to an interconnect provider. See - ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms - will have two paths; all others will have one path. -- interconnect-names: The names of the interconnect paths that correspond to the - interconnects property. Values must be gfx-mem and ocmem. -- qcom,gmu: For GMU attached devices a phandle to the GMU device that will - control the power for the GPU. Applicable targets: - - qcom,adreno-630.2 -- zap-shader: For a5xx and a6xx devices this node contains a memory-region that - points to reserved memory to store the zap shader that can be used to help - bring the GPU out of secure mode. -- firmware-name: optional property of the 'zap-shader' node, listing the - relative path of the device specific zap firmware. -- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and - a4xx Snapdragon SoCs. See - Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. - -Optional properties: -- #cooling-cells: The value must be 2. For details, please refer - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml. - -Example 3xx/4xx: - -/ { - ... - - gpu: adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gpu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 0>; - #cooling-cells = <2>; - }; - - gpu_sram: ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; - - #address-cells = <1>; - #size-cells = <1>; - - gpu_sram: gpu-sram@0 { - reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; - }; - }; -}; - -Example a6xx (with GMU): - -/ { - ... - - gpu@5000000 { - compatible = "qcom,adreno-630.2", "qcom,adreno"; - #stream-id-cells = <16>; - - reg = <0x5000000 0x40000>, <0x509e000 0x10>; - reg-names = "kgsl_3d0_reg_memory", "cx_mem"; - - #cooling-cells = <2>; - - /* - * Look ma, no clocks! The GPU clocks and power are - * controlled entirely by the GMU - */ - - interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - - iommus = <&adreno_smmu 0>; - - operating-points-v2 = <&gpu_opp_table>; - - interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; - interconnect-names = "gfx-mem"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-430000000 { - opp-hz = /bits/ 64 <430000000>; - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; - opp-peak-kBps = <5412000>; - }; - - opp-355000000 { - opp-hz = /bits/ 64 <355000000>; - opp-level = <RPMH_REGULATOR_LEVEL_SVS>; - opp-peak-kBps = <3072000>; - }; - - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; - opp-peak-kBps = <3072000>; - }; - - opp-180000000 { - opp-hz = /bits/ 64 <180000000>; - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; - opp-peak-kBps = <1804000>; - }; - }; - - qcom,gmu = <&gmu>; - - zap-shader { - memory-region = <&zap_shader_region>; - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" - }; - }; -}; diff --git a/dts/Bindings/display/msm/gpu.yaml b/dts/Bindings/display/msm/gpu.yaml new file mode 100644 index 0000000000..99a1ba3ada --- /dev/null +++ b/dts/Bindings/display/msm/gpu.yaml @@ -0,0 +1,288 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Devicetree bindings for the Adreno or Snapdragon GPUs + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + oneOf: + - description: | + The driver is parsing the compat string for Adreno to + figure out the gpu-id and patch level. + items: + - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Imageon to + figure out the gpu-id and patch level. + items: + - pattern: '^amd,imageon-200\.[0-1]$' + - const: amd,imageon + + clocks: true + + clock-names: true + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_mem + - const: cx_dbgc + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 2 + + interconnect-names: + minItems: 1 + items: + - const: gfx-mem + - const: ocmem + + iommus: + maxItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: | + phandles to one or more reserved on-chip SRAM regions. + phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml + + operating-points-v2: true + opp-table: + type: object + + power-domains: + maxItems: 1 + + zap-shader: + type: object + description: | + For a5xx and a6xx devices this node contains a memory-region that + points to reserved memory to store the zap shader that can be used to + help bring the GPU out of secure mode. + properties: + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + + firmware-name: + description: | + Default name of the firmware to load to the remote processor. + + "#cooling-cells": + const: 2 + + nvmem-cell-names: + maxItems: 1 + + nvmem-cells: + description: efuse registers + maxItems: 1 + + qcom,gmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. + + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' + + then: + properties: + clocks: + minItems: 2 + maxItems: 7 + + clock-names: + items: + anyOf: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem + description: GPU Memory clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gfx3d + description: GPU 3D engine clock + - const: rbbmtimer + description: GPU RBBM Timer for Adreno 5xx series + minItems: 2 + maxItems: 7 + + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' + + then: # Since Adreno 6xx series clocks should be defined in GMU + properties: + clocks: false + clock-names: false + +examples: + - | + + // Example a3xx/4xx: + + #include <dt-bindings/clock/qcom,mmcc-msm8974.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu: gpu@fdb00000 { + compatible = "qcom,adreno-330.2", "qcom,adreno"; + + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + clock-names = "core", "iface", "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + #cooling-cells = <2>; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfec00000 0x100000>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + - | + + // Example a6xx (with GMU): + + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; + }; + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + #cooling-cells = <2>; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; + }; diff --git a/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml b/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml index b87a2e28c8..a2384bd74c 100644 --- a/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml @@ -26,6 +26,10 @@ properties: - auo,b101uan08.3 # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel - boe,tv105wum-nw0 + # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel + - boe,tv110c9m-ll3 + # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel + - innolux,hj110iz-01a reg: description: the virtual channel number of a DSI peripheral @@ -36,6 +40,9 @@ properties: pp1800-supply: description: core voltage supply + pp3300-supply: + description: core voltage supply + avdd-supply: description: phandle of the regulator that provides positive voltage diff --git a/dts/Bindings/display/panel/orisetech,otm8009a.yaml b/dts/Bindings/display/panel/orisetech,otm8009a.yaml index 4b6dda6dbc..17cbd0ad32 100644 --- a/dts/Bindings/display/panel/orisetech,otm8009a.yaml +++ b/dts/Bindings/display/panel/orisetech,otm8009a.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) maintainers: - - Philippe CORNU <philippe.cornu@st.com> + - Philippe CORNU <philippe.cornu@foss.st.com> description: | The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using diff --git a/dts/Bindings/display/panel/panel-edp.yaml b/dts/Bindings/display/panel/panel-edp.yaml new file mode 100644 index 0000000000..bb0cf6827e --- /dev/null +++ b/dts/Bindings/display/panel/panel-edp.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +description: | + This binding file can be used to indicate that an eDP panel is connected + to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without + actually specifying exactly what panel is connected. This is useful for + the case that more than one different panel could be connected to the + board, either for second-sourcing purposes or to support multiple SKUs + with different LCDs that hook up to a common board. + + As per above, a requirement for using this binding is that the panel is + represented under the DP AUX bus. This means that we can use any + information provided by the DP AUX bus (including the EDID) to identify + the panel. We can use this to identify display size, resolution, and + timings among other things. + + One piece of information about eDP panels that is typically _not_ + provided anywhere on the DP AUX bus is the power sequencing timings. + This is the reason why, historically, we've always had to explicitly + list eDP panels. We solve that here with two tricks. The "worst case" + power on timings for any panels expected to be connected to a board are + specified in these bindings. Once we've powered on, it's expected that + the operating system will lookup the panel in a table (based on EDID + information) to figure out other power sequencing timings. + + eDP panels in general can have somewhat arbitrary power sequencing + requirements. However, even though it's arbitrary in general, the + vast majority of panel datasheets have a power sequence diagram that + looks the exactly the same as every other panel. Each panel datasheet + cares about different timings in this diagram but the fact that the + diagram is so similar means we can come up with a single driver to + handle it. + + These diagrams all look roughly like this, sometimes labeled with + slightly different numbers / lines but all pretty much the same + sequence. This is because much of this diagram comes straight from + the eDP Standard. + + __________________________________________________ + Vdd ___/: :\____ / + _/ : : \_____/ + :<T1>:<T2>: :<--T10-->:<T11>:<T12>: + : +-----------------------+---------+---------+ + eDP -----------+ Black video | Src vid | Blk vid + + Display : +-----------------------+---------+---------+ + : _______________________:_________:_________: + HPD :<T3>| : : | + ___________| : : |_____________ + : : : : + Sink +-----------------------:---------:---------+ + AUX CH -----------+ AUX Ch operational : : +------------- + +-----------------------:---------:---------+ + : : : : + :<T4>: :<T7>: : : + Src main +------+------+--------------+---------+ + lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+------------- + +------+------+--------------+---------+ + : <T5> :<-T6->:<-T8->: : + :__:<T9>: + LED_EN | | + _____________________________________| |____________________________ + : : + __________:__:_ + PWM | : : | + __________________________| : : |__________________________ + : : : : + _____________:__________:__:_:______ + Bklight ____/: : : : : :\____ + power _______/ :<---T13---->: : : :<T16>: \______________ + (Vbl) :<T17>:<---------T14--------->: :<-T15->:<T18>: + + The above looks fairly complex but, as per above, each panel only cares + about a subset of those timings. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: edp-panel + + hpd-reliable-delay-ms: + description: + A fixed amount of time that must be waited after powering on the + panel's power-supply before the HPD signal is a reliable way to know + when the AUX channel is ready. This is useful for panels that glitch + the HPD at the start of power-on. This value is not needed if HPD is + always reliable for all panels that might be connected. + + hpd-absent-delay-ms: + description: + The panel specifies that HPD will be asserted this many milliseconds + from power on (timing T3 in the diagram above). If we have no way to + measure HPD then a fixed delay of this many milliseconds can be used. + This can also be used as a timeout when waiting for HPD. Does not + include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms + and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and + then we know HPD would assert in the next 120 ms. This value is not + needed if HPD hooked up, either through a GPIO in the panel node or + hooked up directly to the eDP controller. + + backlight: true + enable-gpios: true + port: true + power-supply: true + no-hpd: true + hpd-gpios: true + +additionalProperties: false + +required: + - compatible + - power-supply + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + hpd-reliable-delay-ms = <15>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml index 335776c454..f3c9395d23 100644 --- a/dts/Bindings/display/panel/panel-simple.yaml +++ b/dts/Bindings/display/panel/panel-simple.yaml @@ -166,6 +166,8 @@ properties: - innolux,at070tn92 # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel - innolux,g070y2-l01 + # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel + - innolux,g070y2-t02 # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel - innolux,g101ice-l01 # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel @@ -309,6 +311,8 @@ properties: - urt,umsh-8596md-11t - urt,umsh-8596md-19t - urt,umsh-8596md-20t + # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel + - vivax,tpc9150-panel # VXT 800x480 color TFT LCD panel - vxt,vl050-8048nt-c01 # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel @@ -317,6 +321,7 @@ properties: - yes-optoelectronics,ytc700tlag-05-201c backlight: true + ddc-i2c-bus: true enable-gpios: true port: true power-supply: true diff --git a/dts/Bindings/display/panel/raydium,rm68200.yaml b/dts/Bindings/display/panel/raydium,rm68200.yaml index 39477793d2..e8ce231563 100644 --- a/dts/Bindings/display/panel/raydium,rm68200.yaml +++ b/dts/Bindings/display/panel/raydium,rm68200.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel maintainers: - - Philippe CORNU <philippe.cornu@st.com> + - Philippe CORNU <philippe.cornu@foss.st.com> description: | The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD diff --git a/dts/Bindings/display/panel/samsung,s6d27a1.yaml b/dts/Bindings/display/panel/samsung,s6d27a1.yaml new file mode 100644 index 0000000000..26e3c820a2 --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6d27a1.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D27A1 display panel + +description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile + Displays (SMD). The panel must obey the rules for a SPI slave device + as specified in spi/spi-controller.yaml + +maintainers: + - Markuss Broks <markuss.broks@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6d27a1 + + reg: true + + interrupts: + description: provides an optional ESD (electrostatic discharge) + interrupt that signals abnormalities in the display hardware. + This can also be raised for other reasons like erroneous + configuration. + maxItems: 1 + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + maximum: 1200000 + + port: true + +required: + - compatible + - reg + - vci-supply + - vccio-supply + - spi-cpha + - spi-cpol + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + compatible = "spi-gpio"; + sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "samsung,s6d27a1"; + spi-max-frequency = <1200000>; + spi-cpha; + spi-cpol; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml b/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml new file mode 100644 index 0000000000..271c097cc9 --- /dev/null +++ b/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 6.0" FullHD TFT LCD panel + +maintainers: + - Dmitry Baryskov <dmitry.baryshkov@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ls060t1sx01 + + reg: true + backlight: true + reset-gpios: true + port: true + + avdd-supply: + description: handle of the regulator that provides the positive supply voltage + avee-supply: + description: handle of the regulator that provides the negative supply voltage + vddi-supply: + description: handle of the regulator that provides the I/O supply voltage + vddh-supply: + description: handle of the regulator that provides the analog supply voltage + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls060t1sx01"; + reg = <0>; + avdd-supply = <&pm8941_l22>; + backlight = <&backlight>; + reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/dts/Bindings/display/renesas,du.yaml b/dts/Bindings/display/renesas,du.yaml index e3ca5389c1..13efea5745 100644 --- a/dts/Bindings/display/renesas,du.yaml +++ b/dts/Bindings/display/renesas,du.yaml @@ -39,6 +39,7 @@ properties: - renesas,du-r8a77980 # for R-Car V3H compatible DU - renesas,du-r8a77990 # for R-Car E3 compatible DU - renesas,du-r8a77995 # for R-Car D3 compatible DU + - renesas,du-r8a779a0 # for R-Car V3U compatible DU reg: maxItems: 1 @@ -773,6 +774,56 @@ allOf: - reset-names - renesas,vsps + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a779a0 + then: + properties: + clocks: + items: + - description: Functional clock + + clock-names: + maxItems: 1 + items: + - const: du.0 + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DSI 0 + port@1: + description: DSI 1 + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + renesas,vsps: + minItems: 2 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + additionalProperties: false examples: diff --git a/dts/Bindings/display/st,stm32-dsi.yaml b/dts/Bindings/display/st,stm32-dsi.yaml index ed310bbe3a..ce1ef93cce 100644 --- a/dts/Bindings/display/st,stm32-dsi.yaml +++ b/dts/Bindings/display/st,stm32-dsi.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 DSI host controller maintainers: - - Philippe Cornu <philippe.cornu@st.com> - - Yannick Fertre <yannick.fertre@st.com> + - Philippe Cornu <philippe.cornu@foss.st.com> + - Yannick Fertre <yannick.fertre@foss.st.com> description: The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller. diff --git a/dts/Bindings/display/st,stm32-ltdc.yaml b/dts/Bindings/display/st,stm32-ltdc.yaml index 4ae3d75492..01e2da2379 100644 --- a/dts/Bindings/display/st,stm32-ltdc.yaml +++ b/dts/Bindings/display/st,stm32-ltdc.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 lcd-tft display controller maintainers: - - Philippe Cornu <philippe.cornu@st.com> - - Yannick Fertre <yannick.fertre@st.com> + - Philippe Cornu <philippe.cornu@foss.st.com> + - Yannick Fertre <yannick.fertre@foss.st.com> properties: compatible: diff --git a/dts/Bindings/display/tilcdc/tilcdc.txt b/dts/Bindings/display/tilcdc/tilcdc.txt index 3e64075ac7..3b3d0bbfcf 100644 --- a/dts/Bindings/display/tilcdc/tilcdc.txt +++ b/dts/Bindings/display/tilcdc/tilcdc.txt @@ -60,7 +60,7 @@ Example: blue-and-red-wiring = "crossed"; port { - lcdc_0: endpoint@0 { + lcdc_0: endpoint { remote-endpoint = <&hdmi_0>; }; }; @@ -75,7 +75,7 @@ Example: pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; port { - hdmi_0: endpoint@0 { + hdmi_0: endpoint { remote-endpoint = <&lcdc_0>; }; }; diff --git a/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index d88bd93f4b..10ec78ca1c 100644 --- a/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -160,8 +160,8 @@ examples: <&xlnx_dpdma 2>, <&xlnx_dpdma 3>; - phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>, - <&psgtr 0 PHY_TYPE_DP 1 3 27000000>; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; phy-names = "dp-phy0", "dp-phy1"; }; diff --git a/dts/Bindings/display/xylon,logicvc-display.yaml b/dts/Bindings/display/xylon,logicvc-display.yaml new file mode 100644 index 0000000000..fc02c5d50c --- /dev/null +++ b/dts/Bindings/display/xylon,logicvc-display.yaml @@ -0,0 +1,301 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Bootlin +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xylon LogiCVC display controller + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +description: | + The Xylon LogiCVC is a display controller that supports multiple layers. + It is usually implemented as programmable logic and was optimized for use + with Xilinx Zynq-7000 SoCs and Xilinx FPGAs. + + Because the controller is intended for use in a FPGA, most of the + configuration of the controller takes place at logic configuration bitstream + synthesis time. As a result, many of the device-tree bindings are meant to + reflect the synthesis configuration and must not be configured differently. + Matching synthesis parameters are provided when applicable. + + Layers are declared in the "layers" sub-node and have dedicated configuration. + In version 3 of the controller, each layer has fixed memory offset and address + starting from the video memory base address for its framebuffer. In version 4, + framebuffers are configured with a direct memory address instead. + +properties: + compatible: + enum: + - xylon,logicvc-3.02.a-display + - xylon,logicvc-4.01.a-display + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + items: + # vclk is required and must be provided as first item. + - const: vclk + # Other clocks are optional and can be provided in any order. + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + + interrupts: + maxItems: 1 + + memory-region: + maxItems: 1 + + xylon,display-interface: + enum: + # Parallel RGB interface (C_DISPLAY_INTERFACE == 0) + - parallel-rgb + # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1) + - bt656 + # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2) + - lvds-4bits + # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4) + - lvds-3bits + # DVI interface (C_DISPLAY_INTERFACE == 5) + - dvi + description: Display output interface (C_DISPLAY_INTERFACE). + + xylon,display-colorspace: + enum: + # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0) + - rgb + # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1) + - yuv422 + # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2) + - yuv444 + description: Display output colorspace (C_DISPLAY_COLOR_SPACE). + + xylon,display-depth: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: Display output depth (C_PIXEL_DATA_WIDTH). + + xylon,row-stride: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). + + xylon,dithering: + $ref: "/schemas/types.yaml#/definitions/flag" + description: Dithering module is enabled (C_XCOLOR) + + xylon,background-layer: + $ref: "/schemas/types.yaml#/definitions/flag" + description: | + The last layer is used to display a black background (C_USE_BACKGROUND). + The layer must still be registered. + + xylon,layers-configurable: + $ref: "/schemas/types.yaml#/definitions/flag" + description: | + Configuration of layers' size, position and offset is enabled + (C_USE_SIZE_POSITION). + + layers: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^layer@[0-9]+$": + type: object + + properties: + reg: + maxItems: 1 + + xylon,layer-depth: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: Layer depth (C_LAYER_X_DATA_WIDTH). + + xylon,layer-colorspace: + enum: + # RGB colorspace (C_LAYER_X_TYPE == 0) + - rgb + # YUV packed colorspace (C_LAYER_X_TYPE == 0) + - yuv + description: Layer colorspace (C_LAYER_X_TYPE). + + xylon,layer-alpha-mode: + enum: + # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0) + - layer + # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1) + - pixel + description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). + + xylon,layer-base-offset: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: | + Offset in number of lines (C_LAYER_X_OFFSET) starting from the + video RAM base (C_VMEM_BASEADDR), only for version 3. + + xylon,layer-buffer-offset: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: | + Offset in number of lines (C_BUFFER_*_OFFSET) starting from the + layer base offset for the second buffer used in double-buffering. + + xylon,layer-primary: + $ref: "/schemas/types.yaml#/definitions/flag" + description: | + Layer should be registered as a primary plane (exactly one is + required). + + additionalProperties: false + + required: + - reg + - xylon,layer-depth + - xylon,layer-colorspace + - xylon,layer-alpha-mode + + required: + - "#address-cells" + - "#size-cells" + - layer@0 + + additionalProperties: false + + description: | + The description of the display controller layers, containing layer + sub-nodes that each describe a registered layer. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video output port, typically connected to a panel or bridge. + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - xylon,display-interface + - xylon,display-colorspace + - xylon,display-depth + - xylon,row-stride + - layers + - port + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + logicvc: logicvc@43c00000 { + compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; + reg = <0x43c00000 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + logicvc_display: display@0 { + compatible = "xylon,logicvc-3.02.a-display"; + reg = <0x0 0x6000>; + + memory-region = <&logicvc_cma>; + + clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>; + clock-names = "vclk", "lvdsclk"; + + interrupt-parent = <&intc>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + + xylon,display-interface = "lvds-4bits"; + xylon,display-colorspace = "rgb"; + xylon,display-depth = <16>; + xylon,row-stride = <1024>; + + xylon,layers-configurable; + + layers { + #address-cells = <1>; + #size-cells = <0>; + + layer@0 { + reg = <0>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <0>; + xylon,layer-buffer-offset = <480>; + xylon,layer-primary; + }; + + layer@1 { + reg = <1>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <2400>; + xylon,layer-buffer-offset = <480>; + }; + + layer@2 { + reg = <2>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <960>; + xylon,layer-buffer-offset = <480>; + }; + + layer@3 { + reg = <3>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <480>; + xylon,layer-buffer-offset = <480>; + }; + + layer@4 { + reg = <4>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <8192>; + xylon,layer-buffer-offset = <480>; + }; + }; + + port { + #address-cells = <1>; + #size-cells = <0>; + + logicvc_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + }; |